Peter Maydell [Sun, 29 Jun 2014 12:39:04 +0000 (13:39 +0100)]
Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
docs/qmp: Fix documentation of BLOCK_JOB_READY to match code
char: report frontend open/closed state in 'query-chardev'
virtio-serial: report frontend connection state via monitor
qmp: add qmp-events.txt back
qapi event: clean up in callers
qapi script: clean up in scripts
qapi: ignore generated event files
qapi: move event defines
Peter Maydell [Sun, 29 Jun 2014 11:45:54 +0000 (12:45 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
Net patches
# gpg: Signature made Fri 27 Jun 2014 14:10:57 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <[email protected]>"
# gpg: aka "Stefan Hajnoczi <[email protected]>"
* remotes/stefanha/tags/net-pull-request:
hw/net/eepro100: Implement read-only bits in MDI registers
net: move queue number into NICPeers
net: L2TPv3 transport
qemu-bridge-helper: Fix fd leak in main()
Peter Maydell [Sun, 29 Jun 2014 10:59:00 +0000 (11:59 +0100)]
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-06-27
Changes include:
- instruction emulation fixes
- linux-user fixes
- mac99: layout fixes
- pseries: Initial VFIO support
- pseries: support for UUID
- pseries: support for -boot m
# gpg: Signature made Fri 27 Jun 2014 12:51:01 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (32 commits)
PPC: e500: Only create dt entries for existing serial ports
spapr_pci: Use XICS interrupt allocator and do not cache interrupts in PHB
vmstate: Add preallocation for migrating arrays (VMS_ALLOC flag)
xics: Implement xics_ics_free()
spapr: Remove @next_irq
spapr: Move interrupt allocator to xics
xics: Disable flags reset on xics reset
xics: Add xics_find_source()
xics: Add flags for interrupts
spapr: Add RTAS sysparm SPLPAR Characteristics
spapr: Add RTAS sysparm UUID
spapr: Fix RTAS sysparm DIAGNOSTICS_RUN_MODE
spapr: Add rtas_st_buffer utility function
spapr: Define a 2.1 pseries machine
spapr: Fix code design style (s/SPAPRMachine/sPAPRMachineState)
target-ppc: Add support for POWER8 pvr 0x4D0000
uninorth: Fix PCI hole size
mac99: Add motherboard devices before PCI cards
target-ppc: Remove unused gen_qemu_ld8s()
target-ppc: Remove unused IMM and d extract helpers
...
Peter Maydell [Sun, 29 Jun 2014 10:43:30 +0000 (11:43 +0100)]
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20140627' into staging
A series of patches to the s390-ccw bios:
- code cleanup
- improved error reporting
- most important, support to ipl (boot) from ECKD DASD (CDL, LDL or CMS
formatted)
# gpg: Signature made Fri 27 Jun 2014 12:03:30 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found
* remotes/cohuck/tags/s390x-20140627:
pc-bios/s390-ccw: update binary
pc-bios/s390-ccw: IPL from LDL/CMS-formatted ECKD DASD
pc-bios/s390-ccw: IPL from CDL-formatted ECKD DASD
pc-bios/s390-ccw: factor out ipl code
pc-bios/s390-ccw: Add fill_hex_val func to provide better msgs
pc-bios/s390-ccw: Unify error handling
pc-bios/s390-ccw: add some utility code
pc-bios/s390-ccw: handle different sector sizes
pc-bios/s390-ccw: cleanup and enhance bootmap defintions
pc-bios/s390-ccw: make checkpatch happy
Laszlo Ersek [Thu, 26 Jun 2014 15:50:03 +0000 (17:50 +0200)]
char: report frontend open/closed state in 'query-chardev'
In addition to the on-line reporting added in the previous patch, allow
libvirt to query frontend state independently of events.
Libvirt's path to identify the guest agent channel it cares about differs
between the event added in the previous patch and the QMP response field
added here. The event identifies the frontend device, by "id". The
'query-chardev' QMP command identifies the backend device (again by "id").
The association is under libvirt's control.
Laszlo Ersek [Thu, 26 Jun 2014 15:50:02 +0000 (17:50 +0200)]
virtio-serial: report frontend connection state via monitor
Libvirt wants to know about the guest-side connection state of some
virtio-serial ports (in particular the one(s) assigned to guest agent(s)).
Report such states with a new monitor event.
Luiz Capitulino [Thu, 26 Jun 2014 13:33:47 +0000 (09:33 -0400)]
qmp: add qmp-events.txt back
The conversion of events to the QAPI, resulted in the removal of the
docs/qmp/qmp-events.txt file. This was done to avoid having duplicated
information between qmp-events.txt and qapi-event.json.
However, qmp-events.txt contains examples and we're still not sure
how to proper install QAPI docs in the host. To avoid harming users,
it's better to re-add qmp-events.txt for now and deal with the
duplication later.
Alexander Graf [Wed, 4 Jun 2014 11:48:18 +0000 (13:48 +0200)]
PPC: e500: Only create dt entries for existing serial ports
When the user specifies -nodefaults he can tell us that he doesn't want any
serial ports spawned by default. While we do honor that wish, we still create
device tree entries for those non-existent devices.
Make device tree generation depend on whether the device is actually available.
spapr_pci: Use XICS interrupt allocator and do not cache interrupts in PHB
Currently SPAPR PHB keeps track of all allocated MSI (here and below
MSI stands for both MSI and MSIX) interrupt because
XICS used to be unable to reuse interrupts. This is a problem for
dynamic MSI reconfiguration which happens when guest reloads a driver
or performs PCI hotplug. Another problem is that the existing
implementation can enable MSI on 32 devices maximum
(SPAPR_MSIX_MAX_DEVS=32) and there is no good reason for that.
This makes use of new XICS ability to reuse interrupts.
This reorganizes MSI information storage in sPAPRPHBState. Instead of
static array of 32 descriptors (one per a PCI function), this patch adds
a GHashTable when @config_addr is a key and (first_irq, num) pair is
a value. GHashTable can dynamically grow and shrink so the initial limit
of 32 devices is gone.
This changes migration stream as @msi_table was a static array while new
@msi_devs is a dynamic hash table. This adds temporary array which is
used for migration, it is populated in "spapr_pci"::pre_save() callback
and expanded into the hash table in post_load() callback. Since
the destination side does not know the number of MSI-enabled devices
in advance and cannot pre-allocate the temporary array to receive
migration state, this makes use of new VMSTATE_STRUCT_VARRAY_ALLOC macro
which allocates the array automatically.
This resets the MSI configuration space when interrupts are released by
the ibm,change-msi RTAS call.
This fixed traces to be more informative.
This changes vmstate_spapr_pci_msi name from "...lsi" to "...msi" which
was incorrect by accident. As the internal representation changed,
thus bumps migration version number.
Signed-off-by: Alexey Kardashevskiy <[email protected]>
[agraf: drop g_malloc_n usage] Signed-off-by: Alexander Graf <[email protected]>
vmstate: Add preallocation for migrating arrays (VMS_ALLOC flag)
There are few helpers already to support array migration. However they all
require the destination side to preallocate arrays before migration which
is not always possible due to unknown array size as it might be some
sort of dynamic state. One of the examples is an array of MSIX-enabled
devices in SPAPR PHB - this array may vary from 0 to 65536 entries and
its size depends on guest's ability to enable MSIX or do PCI hotplug.
This adds new VMSTATE_VARRAY_STRUCT_ALLOC macro which is pretty similar to
VMSTATE_STRUCT_VARRAY_POINTER_INT32 but it can alloc memory for migratign
array on the destination side.
This defines VMS_ALLOC flag for a field.
This changes vmstate_base_addr() to do the allocation when receiving
migration.
This removes @next_irq from sPAPREnvironment which was used in old
IRQ allocator as XICS is now responsible for IRQs and keeps track of
allocated IRQs.
The current allocator returns IRQ numbers from a pool and does not
support IRQs reuse in any form as it did not keep track of what it
previously returned, it only keeps the last returned IRQ. Some use
cases such as PCI hot(un)plug may require IRQ release and reallocation.
This moves an allocator from SPAPR to XICS.
This switches IRQ users to use new API.
This uses LSI/MSI flags to know if interrupt is allocated.
The interrupt release function will be posted as a separate patch.
The existing interrupt allocation scheme in SPAPR assumes that
interrupts are allocated at the start time, continously and the config
will not change. However, there are cases when this is not going to work
such as:
1. migration - we will have to have an ability to choose interrupt
numbers for devices in the command line and this will create gaps in
interrupt space.
2. PCI hotplug - interrupts from unplugged device need to be returned
back to interrupt pool, otherwise we will quickly run out of interrupts.
This replaces a separate lslsi[] array with a byte in the ICSIRQState
struct and defines "LSI" and "MSI" flags. Neither of these flags set
signals that the descriptor is not allocated and not in use.
Sam bobroff [Wed, 25 Jun 2014 03:54:32 +0000 (13:54 +1000)]
spapr: Add RTAS sysparm SPLPAR Characteristics
Add support for the SPLPAR Characteristics parameter to the emulated
RTAS call ibm,get-system-parameter.
The support provides just enough information to allow "cat
/proc/powerpc/lparcfg" to succeed without generating a kernel error
message.
Without this patch the above command will produce the following kernel
message: arch/powerpc/platforms/pseries/lparcfg.c \
parse_system_parameter_string Error calling get-system-parameter \
(0xfffffffd)
Sam bobroff [Wed, 25 Jun 2014 03:54:30 +0000 (13:54 +1000)]
spapr: Fix RTAS sysparm DIAGNOSTICS_RUN_MODE
This allows the ibm,get-system-parameter RTAS call to succeed for the
DIAGNOSTICS_RUN_MODE system parameter.
The problem can be seen with "ppc64_cpu --run-mode" from the
powerpc-utils package which fails before this patch with "Machine does
not support diagnostic run mode".
This is corrected by using the rtas_st_buffer() function to write to
the buffer.
The RTAS constants are also moved out into a header file, some new
constants added and the surrounding code slightly simplified.
At the moment QEMU knows about one version of POWER8 CPU with
PVR 0x4B.0000. This CPU class is defined as "POWER8". The linux
kernel names it as "POWER8E" which is different from the name QEMU uses.
Now we get another version of POWER8 which is architecturally equivalent
to POWER8E but has different PVR 0x4D.0000 so QEMU fails to find
a PPC CPU class on these machines. The linux kernel names these CPUs as
"POWER8".
This renames the existing "POWER8" to "POWER8E" to be more precise and
stay in sync with the linux kernel.
This adds a new "POWER8" family which calls POWER8E class init function
and defines own PVR mask (used to match a CPU class) and desc (used to
create dynamic version-less CPU class).
This does not change CPU class fw_name attribute as the host POWER8
firmware keeps using "PowerPC,POWER8" on both POWER8 and POWER8E.
BALATON Zoltan [Mon, 23 Jun 2014 22:03:48 +0000 (00:03 +0200)]
mac99: Add motherboard devices before PCI cards
Change the order of creating devices for New World Mac emulation so
that devices on the motherboard are added first and PCI cards (VGA and
NIC) come later. As a side effect, this also causes OpenBIOS to map
the motherboard devices into the MMIO space to the same addresses as
on real hardware and allow clients that hardcode these addresses (e.g.
MorphOS) to find and use them until OpenBIOS is tought to map devices
to specific addresses. (On real hardware the graphics and network
cards are really on separate buses but we don't model that yet.) This
brings the memory map closer to what is found on PowerMac3,1.
Peter Maydell [Mon, 23 Jun 2014 23:05:09 +0000 (00:05 +0100)]
target-ppc: Remove unused IMM and d extract helpers
Remove the definition of the IMM and d extract helpers; these seem to have
been added as part of the initial PPC support in 2003 but never actually
used.
This turns the sPAPR support on and enables VFIO container use
in the kernel.
This extends vfio_connect_container to support VFIO_SPAPR_TCE_IOMMU type
in the host kernel.
This registers a memory listener which sPAPR IOMMU will notify when
executing H_PUT_TCE/etc DMA calls. The listener then will notify the host
kernel about DMA map/unmap operation via VFIO_IOMMU_MAP_DMA/
VFIO_IOMMU_UNMAP_DMA ioctls.
This executes VFIO_IOMMU_ENABLE ioctl to make sure that the IOMMU is free
of mappings and can be exclusively given to the user. At the moment SPAPR
is the only platform requiring this call to be implemented.
Note that the host kernel function implementing VFIO_IOMMU_DISABLE
is called automatically when container's fd is closed so there is
no need to call it explicitly from QEMU. We may need to call
VFIO_IOMMU_DISABLE explicitly in the future for some sort of dynamic
reconfiguration (PCI hotplug or dynamic IOMMU group management).
spapr_pci_vfio: Add spapr-pci-vfio-host-bridge to support vfio
The patch adds a spapr-pci-vfio-host-bridge device type
which is a PCI Host Bridge with VFIO support. The new device
inherits from the spapr-pci-host-bridge device and adds an "iommu"
property which is an IOMMU id. This ID represents a minimal entity
for which IOMMU isolation can be guaranteed. In SPAPR architecture IOMMU
group is called a Partitionable Endpoint (PE).
Current implementation supports one IOMMU id per QEMU VFIO PHB. Since
SPAPR allows multiple PHB for no extra cost, this does not seem to
be a problem. This limitation may change in the future though.
Example of use:
Configure and Add 3 functions of a multifunctional device to QEMU:
(the NEC PCI USB card is used as an example here):
-device spapr-pci-vfio-host-bridge,id=USB,iommu=4,index=7 \
-device vfio-pci,host=4:0:1.0,addr=1.0,bus=USB,multifunction=true
-device vfio-pci,host=4:0:1.1,addr=1.1,bus=USB
-device vfio-pci,host=4:0:1.2,addr=1.2,bus=USB
where:
* index=7 is a QEMU PHB index (used as source for MMIO/MSI/IO windows
offset);
* iommu=4 is an IOMMU id which can be found in sysfs:
[aik@vpl2 ~]$ cd /sys/bus/pci/devices/0004:00:00.0/
[aik@vpl2 0004:00:00.0]$ ls -l iommu_group
lrwxrwxrwx 1 root root 0 Jun 5 12:49 iommu_group -> ../../../kernel/iommu_groups/4
While most operations with VFIO IOMMU driver are generic and used inside
vfio.c, there are still some operations which only specific VFIO IOMMU
drivers implement. The first example of it will be reading a DMA window
start from the host.
This adds a helper which passes an ioctl request to the container's fd.
The helper will check if @req is known. For this, stub is added. This return
-1 on any requests for now.
POWER KVM supports an KVM_CAP_SPAPR_TCE capability which allows allocating
TCE tables in the host kernel memory and handle H_PUT_TCE requests
targeted to specific LIOBN (logical bus number) right in the host without
switching to QEMU. At the moment this is used for emulated devices only
and the handler only puts TCE to the table. If the in-kernel H_PUT_TCE
handler finds a LIOBN and corresponding table, it will put a TCE to
the table and complete hypercall execution. The user space will not be
notified.
Upcoming VFIO support is going to use the same sPAPRTCETable device class
so KVM_CAP_SPAPR_TCE is going to be used as well. That means that TCE
tables for VFIO are going to be allocated in the host as well.
However VFIO operates with real IOMMU tables and simple copying of
a TCE to the real hardware TCE table will not work as guest physical
to host physical address translation is requited.
So until the host kernel gets VFIO support for H_PUT_TCE, we better not
to register VFIO's TCE in the host.
This adds a place holder for KVM_CAP_SPAPR_TCE_VFIO capability. It is not
in upstream yet and being discussed so now it is always false which means
that in-kernel VFIO acceleration is not supported.
This adds a bool @vfio_accel flag to the sPAPRTCETable device telling
that sPAPRTCETable should not try allocating TCE table in the host kernel
for VFIO. The flag is false now as at the moment there is no VFIO.
This adds an vfio_accel parameter to spapr_tce_new_table(), the semantic
is the same. Since there is only emulated PCI and VIO now, the flag is set
to false. Upcoming VFIO support will set it to true.
This is a preparation patch so no change in behaviour is expected
At the moment spapr_rtas_register() allocates a new token number for every
new RTAS callback so numbers are not fixed and depend on the number of
supported RTAS handlers and the exact order of spapr_rtas_register() calls.
These tokens are copied into the device tree and remain the same during
the guest lifetime.
When we start another guest to receive a migration, it calls
spapr_rtas_register() as well. If the number of RTAS handlers or their
order is different in QEMU on source and destination sides, the "/rtas"
node in the device tree will differ. Since migration overwrites the device
tree (as it overwrites the entire RAM), the actual RTAS config on
the destination side gets broken.
This defines global contant values for every RTAS token which QEMU
is using today.
This changes spapr_rtas_register() to accept a token number instead of
allocating one. This changes all users of spapr_rtas_register().
This changes XICS-KVM not to cache tokens registered with KVM as they
constant now.
This makes TOKEN_BASE global as RTAS_XXX use TOKEN_BASE as
a base. TOKEN_MAX is moved and renamed too and its value is changed
to the last token + 1. Boundary checks for token values are adjusted.
This reserves token numbers for "os-term" handlers and PCI hotplug
which we are working on.
Alexander Graf [Mon, 23 Jun 2014 13:23:08 +0000 (15:23 +0200)]
PPC: Add support for Apple gdb in gdbstub
The Apple gdbstub protocol is different from the normal gdbstub protocol
used on PowerPC. Add support for the different variant, so that we can use
Apple's gdb to debug guest code.
Keep in mind that the switch is a compile time option. We can't detect
during runtime whether a gdb connecting to us is an upstream gdb or an
Apple gdb.
Sorav Bansal [Tue, 17 Jun 2014 05:54:02 +0000 (11:24 +0530)]
target-ppc: fixed translation of mcrxr instruction
Fixed bug in gen_mcrxr() in target-ppc/translate.c:
The XER[SO], XER[OV], and XER[CA] flags are stored in the least
significant bit (bit 0) of their respective registers. They need
to be shifted left (by their respective offsets) to generate the final
XER value. The old translation code for the 'mcrxr' instruction
was assuming that the flags are stored in bit 2, and was shifting them
right (incorrectly)
Tom Musta [Mon, 16 Jun 2014 16:03:19 +0000 (11:03 -0500)]
linux-user: Correct AUXV Cache Line Sizes for PowerPC
Set the AT_ICACHEBSIZE and AT_DCACHEBSIZE entries of the AUXV to match the
CPU model's cache line sizes. This fixes memory clobbering problems on more
recent Book 3s implementations; memset(p, 0, N) will use the dcbz instruction
when N is sufficiently large and many of the newer server CPUs have cache lines
sizes of 128 bytes.
Peter Maydell [Mon, 9 Jun 2014 15:03:08 +0000 (16:03 +0100)]
hw/net/eepro100: Implement read-only bits in MDI registers
Although we defined an eepro100_mdi_mask[] array indicating which bits
in the registers are read-only, we weren't actually doing anything with
it. Make the MDI register-write code use it rather than manually making
register 1 read-only and leaving the rest as reads-as-written. (The
special-case handling of register 0 remains as before since its mask is
all-zeros and the special casing happens before we apply the masking.)
IPL_assert(term,message) is introduced to handle error conditions.
ebcdic_to_ascii() to convert chars (mostly to print VOLSERs).
read_block() provision for unified block-number handling.
pc-bios/s390-ccw: cleanup and enhance bootmap defintions
Add declarations to describe structure of different dasd IPL sources
(eckd and fba). Move the structure definitions to a new header bootmap.h.
While we are at it, change structs to typedefs.
Jiri Pirko [Mon, 26 May 2014 10:04:08 +0000 (12:04 +0200)]
net: move queue number into NICPeers
It indicates the number of elements in ncs field and makes sense to have
int inside NICPeers. Also in parse_netdev we do not need to access
container and work with NICPeers only.
Anton Ivanov [Fri, 20 Jun 2014 09:34:41 +0000 (10:34 +0100)]
net: L2TPv3 transport
This transport allows to connect a QEMU nic to a static Ethernet
over L2TPv3 tunnel. The transport supports all options present
in the Linux kernel implementation. It allows QEMU to connect
to any Linux host running kernel 3.3+, most routers and network
devices as well as other QEMU instances.
[Fixed up net_client_init1() switch statement to support -netdev
--Stefan]
Peter Maydell [Mon, 23 Jun 2014 14:55:03 +0000 (15:55 +0100)]
coroutine-win32.c: Add noinline attribute to work around gcc bug
A gcc codegen bug in x86_64-w64-mingw32-gcc (GCC) 4.6.3 means that
non-debug builds of QEMU for Windows tend to assert when using
coroutines. Work around this by marking qemu_coroutine_switch
as noinline.
If we allow gcc to inline qemu_coroutine_switch into
coroutine_trampoline, then it hoists the code to get the
address of the TLS variable "current" out of the while() loop.
This is an invalid transformation because the SwitchToFiber()
call may be called when running thread A but return in thread B,
and so we might be in a different thread context each time
round the loop. This can happen quite often. Typically.
a coroutine is started when a VCPU thread does bdrv_aio_readv:
VCPU thread
main VCPU thread coroutine I/O coroutine
bdrv_aio_readv ----->
start I/O operation
thread_pool_submit_co
<------------ yields
back to emulation
Then I/O finishes and the thread-pool.c event notifier triggers in
the I/O thread. event_notifier_ready calls thread_pool_co_cb, and
the I/O coroutine now restarts *in another thread*:
iothread
main iothread coroutine I/O coroutine (formerly in VCPU thread)
event_notifier_ready
thread_pool_co_cb -----> current = I/O coroutine;
call AIO callback
But on Win32, because of the bug, the "current" being set here the
current coroutine of the VCPU thread, not the iothread.
noinline is a good-enough workaround, and quite unlikely to break in
the future.
(Thanks to Paolo Bonzini for assistance in diagnosing the problem
and providing the detailed example/ascii art quoted above.)
Peter Maydell [Thu, 26 Jun 2014 12:33:11 +0000 (13:33 +0100)]
Merge remote-tracking branch 'remotes/afaerber/tags/qom-cpu-for-2.1' into staging
X86CPU
* Filter out MONITOR for KVM
* Fix filtering for TCG
* -cpu foo,check and -cpu foo,enforce support for TCG
* -cpu host migration support (-cpu host,migratable=no to disable)
* Add invtsc feature support
* New model: Broadwell
# gpg: Signature made Wed 25 Jun 2014 22:55:04 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <[email protected]>"
# gpg: aka "Andreas Färber <[email protected]>"
* remotes/afaerber/tags/qom-cpu-for-2.1:
target-i386: Broadwell CPU model
target-i386: Fix indentation of CPU model definitions
target-i386: Support "invariant tsc" flag
target-i386: block migration and savevm if invariant tsc is exposed
savevm: check vmsd for migratability status
target-i386: Set migratable=yes by default on "host" CPU mooel
target-i386: Add "migratable" property to "host" CPU model
target-i386: Support check/enforce flags in TCG mode, too
target-i386: Loop-based feature word filtering in TCG mode
target-i386: Loop-based copying and setting/unsetting of feature words
target-i386: Define TCG_*_FEATURES earlier in cpu.c
target-i386: Filter KVM and 0xC0000001 features on TCG
target-i386: Filter FEAT_7_0_EBX TCG features too
target-i386: Make TCG feature filtering more readable
target-i386: Isolate KVM-specific code on CPU feature filtering logic
target-i386: Pass FeatureWord argument to report_unavailable_features()
target-i386: Merge feature filtering/checking functions
target-i386: Simplify reporting of unavailable features
target-i386: kvm: Don't enable MONITOR by default on any CPU model
Expose "Invariant TSC" flag, if KVM is enabled. From Intel documentation:
17.13.1 Invariant TSC The time stamp counter in newer processors may
support an enhancement, referred to as invariant TSC. Processor’s
support for invariant TSC is indicated by CPUID.80000007H:EDX[8].
The invariant TSC will run at a constant rate in all ACPI P-, C-.
and T-states. This is the architectural behavior moving forward. On
processors with invariant TSC support, the OS may use the TSC for wall
clock timer services (instead of ACPI or HPET timers). TSC reads are
much more efficient and do not incur the overhead associated with a ring
transition or access to a platform resource.
Signed-off-by: Marcelo Tosatti <[email protected]>
[ehabkost: redo feature filtering to use .tcg_features]
[ehabkost: add CPUID_APM_INVTSC macro, add it to .unmigratable_flags] Signed-off-by: Eduardo Habkost <[email protected]> Signed-off-by: Andreas Färber <[email protected]>
Eduardo Habkost [Tue, 17 Jun 2014 20:31:53 +0000 (17:31 -0300)]
target-i386: Set migratable=yes by default on "host" CPU mooel
Having only migratable flags reported by default on the "host" CPU model
is safer for the following reasons:
* Existing users may expect "-cpu host" to be migration-safe, if they
take care of always using compatible host CPUs, host kernels, and
QEMU versions.
* Users who don't care aboug migration and want to enable all features
supported by the host kernel can simply change their setup to use
migratable=no.
Without this change, people using "-cpu host" will stop being able to
migrate, because now "invtsc" is getting enabled by default.
We are not setting migratable=yes by default on all X86CPU subclasses,
because users should be able to get non-migratable features enabled if
they ask for them explicitly.
target-i386: Add "migratable" property to "host" CPU model
This flag will allow the user to choose between two modes:
* All flags that can be enabled on the host, even if unmigratable
(migratable=no);
* All flags that can be enabled on the host, are known to QEMU
and migratable (migratable=yes).
The default is still migratable=false, to keep current behavior, but
this will be changed to migratable=true by another patch.
My plan was to support the "migratable" flag on all CPU classes, but
have the default to "false" on all CPU models except "host". However,
DeviceClass has no mechanism to allow a child class to have a different
property default from the parent class yet, so by now only the "host"
CPU model will support the "migratable" flag.
target-i386: Loop-based feature word filtering in TCG mode
Instead of manually filtering each feature word, add a tcg_features
field to FeatureWordInfo, and use that field to filter all feature words
in TCG mode.
The TCG_7_0_EBX_FEATURES macro was defined but never used (it even had a
typo that was never noticed). Make the existing TCG feature filtering
code use it.
Merge filter_features_for_kvm() and kvm_check_features_against_host().
Both functions made exactly the same calculations, the only difference
was that filter_features_for_kvm() changed the bits on cpu->features[],
and kvm_check_features_against_host() did error reporting.
target-i386: Simplify reporting of unavailable features
Instead of checking and calling unavailable_host_feature() once for each
bit, simply call the function (now renamed to
report_unavailable_features()) once for each feature word.
target-i386: kvm: Don't enable MONITOR by default on any CPU model
KVM never supported the MONITOR flag so it doesn't make sense to have it
enabled by default when KVM is enabled.
The rationale here is similar to the cases where it makes sense to have
a feature enabled by default on all CPU models when on KVM mode (e.g.
x2apic). In this case we are having a feature disabled by default for
the same reasons.
In this case we don't need machine-type compat code because it is
currently impossible to run a KVM VM with the MONITOR flag set.
Peter Maydell [Tue, 24 Jun 2014 16:14:57 +0000 (17:14 +0100)]
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-06-24' into staging
trivial patches for 2014-06-24
# gpg: Signature made Tue 24 Jun 2014 17:07:31 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <[email protected]>"
# gpg: aka "Michael Tokarev <[email protected]>"
# gpg: aka "Michael Tokarev <[email protected]>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB
* remotes/mjt/tags/trivial-patches-2014-06-24:
Add support for the arm breakpoint syscall
Increase maximum number of session of the internal TFTP server.
target-s390x: Remove unused ld_code6() function
hw/moxie/moxiesim.c: Remove unused moxie_intc_create()
target-unicore: Remove unused functions
build-sys: introduce install-prog macro to install&strip binaries and use it
tcg: mark tcg_out* and tcg_patch* with attribute 'unused'
rng-random: NULL check not needed before g_free()
block.c: Remove useless 'buf' variable
vscclient: Add required headers to fix build on FreeBSD
target-ppc: Fix compiler warning
configure: Enable TPM by default, add --disable-tpm
Fix new typos (found by codespell)
virtio-serial: remove useless set_config function
Hunter Laux [Fri, 20 Jun 2014 11:13:14 +0000 (04:13 -0700)]
Add support for the arm breakpoint syscall
OABI arm used a software interrupt(0xef9f0001) for breakpoints.
Since 2005 gdb has used the break instruction(0xe7f001f0) for EABI.
Apparently Steel Bank Common Lisp still uses the swi instruction.
This is the kernel implementation:
http://lxr.free-electrons.com/source/arch/arm/kernel/traps.c#L598
Increase maximum number of session of the internal TFTP server.
Grub fails to boot from internal TFTP server when loading more than
3 initrd files.
Grub first opens a session to the TFTP server for every initrd file and
retrieves only the file size for all.
Then it wants to download the content using the old sessions which are
already expired.
Increasing the maximum number of session of the internal TFTP
server avoids this issue.
The error message reads as following:
error: timeout reading
`/boot/ISO.ROOT/BOOTMGR'.
Michael Tokarev [Sun, 22 Jun 2014 06:55:23 +0000 (10:55 +0400)]
build-sys: introduce install-prog macro to install&strip binaries and use it
Use common rule (macro) to install and strip binaries, and use
it in all places where we install binaries, instead of fixing
bugs like 1319493 in every place.
(This fixes https://bugs.launchpad.net/bugs/1319493)
Peter Maydell [Sat, 7 Jun 2014 17:08:44 +0000 (18:08 +0100)]
tcg: mark tcg_out* and tcg_patch* with attribute 'unused'
The tcg_out* and tcg_patch* functions are utility routines that may or
may not be used by a particular backend; mark them with the 'unused'
attribute to suppress spurious warnings if they aren't used.
Cole Robinson [Mon, 16 Jun 2014 19:32:47 +0000 (15:32 -0400)]
configure: Enable TPM by default, add --disable-tpm
I don't see why tpm is disabled by default: it doesn't have any
external dependencies, or change default behavior. Leaving it disabled
is just going to cause it to bit rot.
Enable it by default, and add a --disable-tpm option.
projects / qemu.git / log