include/configs/m53evk.h

   1 /*
   2  * Aries M53 configuration
   3  * Copyright (C) 2012-2013 Marek Vasut <[email protected]>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __M53EVK_CONFIG_H__
   9 #define __M53EVK_CONFIG_H__
  10
  11 #define CONFIG_MXC_GPIO
  12
  13 #include <asm/arch/imx-regs.h>
  14
  15 #define CONFIG_REVISION_TAG
  16 #define CONFIG_SYS_FSL_CLK
  17
  18 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  19
  20 /*
  21  * Memory configurations
  22  */
  23 #define CONFIG_NR_DRAM_BANKS            2
  24 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
  25 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
  26 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
  27 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
  28 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  29 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  30 #define CONFIG_SYS_MEMTEST_START        0x70000000
  31 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
  32
  33 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
  34 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
  35 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
  36
  37 #define CONFIG_SYS_INIT_SP_OFFSET \
  38         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  39 #define CONFIG_SYS_INIT_SP_ADDR \
  40         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  41
  42 #define CONFIG_SYS_TEXT_BASE            0x71000000
  43
  44 /*
  45  * U-Boot general configurations
  46  */
  47 #define CONFIG_SYS_LONGHELP
  48 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  49 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  50 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  51                                                 /* Boot argument buffer size */
  52 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  53 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  54
  55 /*
  56  * Serial Driver
  57  */
  58 #define CONFIG_MXC_UART
  59 #define CONFIG_MXC_UART_BASE            UART2_BASE
  60 #define CONFIG_CONS_INDEX               1
  61
  62 /*
  63  * MMC Driver
  64  */
  65 #ifdef CONFIG_CMD_MMC
  66 #define CONFIG_FSL_ESDHC
  67 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  68 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  69 #endif
  70
  71 /*
  72  * NAND
  73  */
  74 #define CONFIG_ENV_SIZE                 (16 * 1024)
  75 #ifdef CONFIG_CMD_NAND
  76 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  77 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
  78 #define CONFIG_NAND_MXC
  79 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
  80 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
  81 #define CONFIG_SYS_NAND_LARGEPAGE
  82 #define CONFIG_MXC_NAND_HWECC
  83 #define CONFIG_SYS_NAND_USE_FLASH_BBT
  84
  85 /* Environment is in NAND */
  86 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  87 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
  88 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
  89 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
  90 #define CONFIG_ENV_OFFSET_REDUND        \
  91                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
  92
  93 #define CONFIG_MTD_DEVICE
  94 #define CONFIG_MTD_PARTITIONS
  95 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
  96 #define MTDPARTS_DEFAULT                        \
  97         "mtdparts=mxc_nand:"                    \
  98                 "1024k(u-boot),"                \
  99                 "512k(env1),"                   \
 100                 "512k(env2),"                   \
 101                 "14m(boot),"                    \
 102                 "240m(data),"                   \
 103                 "-@2048k(UBI)"
 104 #endif
 105
 106 /*
 107  * Ethernet on SOC (FEC)
 108  */
 109 #ifdef CONFIG_CMD_NET
 110 #define CONFIG_FEC_MXC
 111 #define IMX_FEC_BASE                    FEC_BASE_ADDR
 112 #define CONFIG_FEC_MXC_PHYADDR          0x0
 113 #define CONFIG_MII
 114 #define CONFIG_DISCOVER_PHY
 115 #define CONFIG_FEC_XCV_TYPE             RMII
 116 #define CONFIG_ETHPRIME                 "FEC0"
 117 #endif
 118
 119 /*
 120  * I2C
 121  */
 122 #ifdef CONFIG_CMD_I2C
 123 #define CONFIG_SYS_I2C
 124 #define CONFIG_SYS_I2C_MXC
 125 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 126 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 127 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 128 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
 129 #endif
 130
 131 /*
 132  * RTC
 133  */
 134 #ifdef CONFIG_CMD_DATE
 135 #define CONFIG_RTC_M41T62
 136 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 137 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 138 #endif
 139
 140 /*
 141  * USB
 142  */
 143 #ifdef CONFIG_CMD_USB
 144 #define CONFIG_USB_EHCI_MX5
 145 #define CONFIG_USB_ETHER_ASIX
 146 #define CONFIG_USB_ETHER_MCS7830
 147 #define CONFIG_USB_ETHER_SMSC95XX
 148 #define CONFIG_MXC_USB_PORT             1
 149 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 150 #define CONFIG_MXC_USB_FLAGS            0
 151 #endif
 152
 153 /*
 154  * SATA
 155  */
 156 #ifdef CONFIG_CMD_SATA
 157 #define CONFIG_DWC_AHSATA
 158 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 159 #define CONFIG_DWC_AHSATA_PORT_ID       0
 160 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 161 #define CONFIG_LBA48
 162 #define CONFIG_LIBATA
 163 #endif
 164
 165 /*
 166  * LCD
 167  */
 168 #ifdef CONFIG_VIDEO
 169 #define CONFIG_VIDEO_IPUV3
 170 #define CONFIG_VIDEO_BMP_RLE8
 171 #define CONFIG_VIDEO_BMP_GZIP
 172 #define CONFIG_SPLASH_SCREEN
 173 #define CONFIG_SPLASHIMAGE_GUARD
 174 #define CONFIG_SPLASH_SCREEN_ALIGN
 175 #define CONFIG_BMP_16BPP
 176 #define CONFIG_VIDEO_LOGO
 177 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
 178 #define CONFIG_IPUV3_CLK                200000000
 179 #endif
 180
 181 /*
 182  * Boot Linux
 183  */
 184 #define CONFIG_CMDLINE_TAG
 185 #define CONFIG_INITRD_TAG
 186 #define CONFIG_REVISION_TAG
 187 #define CONFIG_SETUP_MEMORY_TAGS
 188 #define CONFIG_BOOTFILE         "fitImage"
 189 #define CONFIG_LOADADDR         0x70800000
 190 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 191 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 192
 193 /*
 194  * NAND SPL
 195  */
 196 #define CONFIG_SPL_FRAMEWORK
 197 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
 198 #define CONFIG_SPL_TEXT_BASE            0x70008000
 199 #define CONFIG_SPL_PAD_TO               0x8000
 200 #define CONFIG_SPL_STACK                0x70004000
 201
 202 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 203 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 204 #define CONFIG_SYS_NAND_OOBSIZE         64
 205 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 206 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 207 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 208
 209 /*
 210  * Extra Environments
 211  */
 212 #define CONFIG_PREBOOT          "run try_bootscript"
 213 #define CONFIG_HOSTNAME         m53evk
 214
 215 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 216         "consdev=ttymxc1\0"                                             \
 217         "baudrate=115200\0"                                             \
 218         "bootscript=boot.scr\0"                                         \
 219         "bootdev=/dev/mmcblk0p1\0"                                      \
 220         "rootdev=/dev/mmcblk0p2\0"                                      \
 221         "netdev=eth0\0"                                                 \
 222         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
 223         "kernel_addr_r=0x72000000\0"                                    \
 224         "addcons="                                                      \
 225                 "setenv bootargs ${bootargs} "                          \
 226                 "console=${consdev},${baudrate}\0"                      \
 227         "addip="                                                        \
 228                 "setenv bootargs ${bootargs} "                          \
 229                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 230                         "${netmask}:${hostname}:${netdev}:off\0"        \
 231         "addmisc="                                                      \
 232                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 233         "adddfltmtd="                                                   \
 234                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
 235                         "mtdparts default ; "                           \
 236                 "fi\0"                                                  \
 237         "addmtd="                                                       \
 238                 "run adddfltmtd ; "                                     \
 239                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
 240         "addargs=run addcons addmtd addmisc\0"                          \
 241         "mmcload="                                                      \
 242                 "mmc rescan ; "                                         \
 243                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
 244         "ubiload="                                                      \
 245                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
 246                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
 247         "netload="                                                      \
 248                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 249         "miscargs=nohlt panic=1\0"                                      \
 250         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 251         "ubiargs="                                                      \
 252                 "setenv bootargs ubi.mtd=5 "                            \
 253                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
 254         "nfsargs="                                                      \
 255                 "setenv bootargs root=/dev/nfs rw "                     \
 256                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 257         "mmc_mmc="                                                      \
 258                 "run mmcload mmcargs addargs ; "                        \
 259                 "bootm ${kernel_addr_r}\0"                              \
 260         "mmc_ubi="                                                      \
 261                 "run mmcload ubiargs addargs ; "                        \
 262                 "bootm ${kernel_addr_r}\0"                              \
 263         "mmc_nfs="                                                      \
 264                 "run mmcload nfsargs addip addargs ; "                  \
 265                 "bootm ${kernel_addr_r}\0"                              \
 266         "ubi_mmc="                                                      \
 267                 "run ubiload mmcargs addargs ; "                        \
 268                 "bootm ${kernel_addr_r}\0"                              \
 269         "ubi_ubi="                                                      \
 270                 "run ubiload ubiargs addargs ; "                        \
 271                 "bootm ${kernel_addr_r}\0"                              \
 272         "ubi_nfs="                                                      \
 273                 "run ubiload nfsargs addip addargs ; "                  \
 274                 "bootm ${kernel_addr_r}\0"                              \
 275         "net_mmc="                                                      \
 276                 "run netload mmcargs addargs ; "                        \
 277                 "bootm ${kernel_addr_r}\0"                              \
 278         "net_ubi="                                                      \
 279                 "run netload ubiargs addargs ; "                        \
 280                 "bootm ${kernel_addr_r}\0"                              \
 281         "net_nfs="                                                      \
 282                 "run netload nfsargs addip addargs ; "                  \
 283                 "bootm ${kernel_addr_r}\0"                              \
 284         "try_bootscript="                                               \
 285                 "mmc rescan;"                                           \
 286                 "if test -e mmc 0:1 ${bootscript} ; then "              \
 287                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
 288                 "then ; "                                               \
 289                         "echo Running bootscript... ; "                 \
 290                         "source ${kernel_addr_r} ; "                    \
 291                 "fi ; "                                                 \
 292                 "fi\0"
 293
 294 #endif  /* __M53EVK_CONFIG_H__ */