Kevin Wolf [Tue, 3 Jun 2014 14:44:19 +0000 (16:44 +0200)]
block: Use common driver selection code for bdrv_open_file()
This moves the bdrv_open_file() call a bit down so that it can use the
bdrv_open() code that selects the right block driver.
The code between the old and the new call site is either common code
(the error message for an unknown driver has been unified now) or
doesn't run with cleared BDRV_O_PROTOCOL (added an if block in one
place, whereas the right path was already asserted in another place)
Kevin Wolf [Mon, 26 May 2014 09:09:59 +0000 (11:09 +0200)]
block: Create bdrv_fill_options()
The idea of bdrv_fill_options() is to convert every parameter for
opening images, in particular the filename and flags, to entries in the
options QDict.
This patch starts with moving the filename parsing and driver probing
part from bdrv_file_open() to the new function.
Peter Lieven [Tue, 24 Jun 2014 22:06:00 +0000 (00:06 +0200)]
block/nfs: fix url parameter checking
this patch fixes the incorrect usage of strncmp and
adds simple error checking by means of parse_uint_full
instead of atoi for the supplied URL parameters.
Fam Zheng [Tue, 24 Jun 2014 12:26:37 +0000 (20:26 +0800)]
qemu-iotests: Test BLOCK_JOB_READY event for 0Kb image active commit
There should be a BLOCK_JOB_READY event with active commit, regardless
of image length. Let's test the 0 length image case, and make sure it
goes through the ready->complete process.
Fam Zheng [Tue, 24 Jun 2014 12:26:36 +0000 (20:26 +0800)]
mirror: Go through ready -> complete process for 0 len image
When mirroring or active committing a zero length image, BLOCK_JOB_READY
is not reported now, instead the job completes because we short circuit
the mirror job loop.
This is inconsistent with non-zero length images, and only confuses
management software.
Let's do the same thing when seeing a 0-length image: report ready
immediately; wait for block-job-cancel or block-job-complete; clear the
cancel flag as existing non-zero image synced case (cancelled after
ready); then jump to the exit.
Peter Maydell [Tue, 24 Jun 2014 16:14:57 +0000 (17:14 +0100)]
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-06-24' into staging
trivial patches for 2014-06-24
# gpg: Signature made Tue 24 Jun 2014 17:07:31 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <[email protected]>"
# gpg: aka "Michael Tokarev <[email protected]>"
# gpg: aka "Michael Tokarev <[email protected]>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB
* remotes/mjt/tags/trivial-patches-2014-06-24:
Add support for the arm breakpoint syscall
Increase maximum number of session of the internal TFTP server.
target-s390x: Remove unused ld_code6() function
hw/moxie/moxiesim.c: Remove unused moxie_intc_create()
target-unicore: Remove unused functions
build-sys: introduce install-prog macro to install&strip binaries and use it
tcg: mark tcg_out* and tcg_patch* with attribute 'unused'
rng-random: NULL check not needed before g_free()
block.c: Remove useless 'buf' variable
vscclient: Add required headers to fix build on FreeBSD
target-ppc: Fix compiler warning
configure: Enable TPM by default, add --disable-tpm
Fix new typos (found by codespell)
virtio-serial: remove useless set_config function
Hunter Laux [Fri, 20 Jun 2014 11:13:14 +0000 (04:13 -0700)]
Add support for the arm breakpoint syscall
OABI arm used a software interrupt(0xef9f0001) for breakpoints.
Since 2005 gdb has used the break instruction(0xe7f001f0) for EABI.
Apparently Steel Bank Common Lisp still uses the swi instruction.
This is the kernel implementation:
http://lxr.free-electrons.com/source/arch/arm/kernel/traps.c#L598
Increase maximum number of session of the internal TFTP server.
Grub fails to boot from internal TFTP server when loading more than
3 initrd files.
Grub first opens a session to the TFTP server for every initrd file and
retrieves only the file size for all.
Then it wants to download the content using the old sessions which are
already expired.
Increasing the maximum number of session of the internal TFTP
server avoids this issue.
The error message reads as following:
error: timeout reading
`/boot/ISO.ROOT/BOOTMGR'.
Michael Tokarev [Sun, 22 Jun 2014 06:55:23 +0000 (10:55 +0400)]
build-sys: introduce install-prog macro to install&strip binaries and use it
Use common rule (macro) to install and strip binaries, and use
it in all places where we install binaries, instead of fixing
bugs like 1319493 in every place.
(This fixes https://bugs.launchpad.net/bugs/1319493)
Peter Maydell [Sat, 7 Jun 2014 17:08:44 +0000 (18:08 +0100)]
tcg: mark tcg_out* and tcg_patch* with attribute 'unused'
The tcg_out* and tcg_patch* functions are utility routines that may or
may not be used by a particular backend; mark them with the 'unused'
attribute to suppress spurious warnings if they aren't used.
Cole Robinson [Mon, 16 Jun 2014 19:32:47 +0000 (15:32 -0400)]
configure: Enable TPM by default, add --disable-tpm
I don't see why tpm is disabled by default: it doesn't have any
external dependencies, or change default behavior. Leaving it disabled
is just going to cause it to bit rot.
Enable it by default, and add a --disable-tpm option.
Peter Maydell [Tue, 24 Jun 2014 10:14:47 +0000 (11:14 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,net fixes, enhancements
Don's patches to limit below-4g ram for pc
Marcel's pcie hotplug rewrite
Gabriel's changes to e1000 auto-negotiation
qemu char bugfixes by Stefan
misc bugfixes
Signed-off-by: Michael S. Tsirkin <[email protected]>
# gpg: Signature made Mon 23 Jun 2014 16:25:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <[email protected]>"
# gpg: aka "Michael S. Tsirkin <[email protected]>"
* remotes/mst/tags/for_upstream: (23 commits)
xen-hvm: Handle machine opt max-ram-below-4g
pc & q35: Add new machine opt max-ram-below-4g
xen-hvm: Fix xen_hvm_init() to adjust pc memory layout
pcie: coding style tweak
hw/pcie: better hotplug/hotunplug support
hw/pcie: implement power controller functionality
hw/pcie: correct debug message
q35: Use PC_Q35_COMPAT_1_4 on pc-q35-1.4 compat_props
virtio-pci: Report an error when msix vectors init fails
qemu-char: avoid leaking unused fds in tcp_get_msgfds()
qemu-char: fix qemu_chr_fe_get_msgfd()
qapi/string-output-visitor: fix human output
e1000: factor out checking for auto-negotiation availability
e1000: move e1000_autoneg_timer() to after set_ics()
e1000: signal guest on successful link auto-negotiation
e1000: improve auto-negotiation reporting via mii-tool
e1000: emulate auto-negotiation during external link status change
qtest: fix vhost-user-test unbalanced mutex locks
qtest: fix qtest for vhost-user
libqemustub: add more stubs for qemu-char
...
Peter Maydell [Mon, 23 Jun 2014 17:26:58 +0000 (18:26 +0100)]
Merge remote-tracking branch 'remotes/rth/tcg-ppc-merge-1' into staging
* remotes/rth/tcg-ppc-merge-1: (25 commits)
tcg-ppc: Use the return address as a base pointer
tcg-ppc: Merge cache-utils into the backend
qemu/osdep: Remove the need for qemu_init_auxval
tcg-ppc: Rename the tcg/ppc64 backend
tcg-ppc: Remove the backend
tcg-ppc64: Merge ppc32 shifts
tcg-ppc64: Support mulsh_i32
tcg-ppc64: Merge ppc32 register usage
tcg-ppc64: Merge ppc32 qemu_ld/st
tcg-ppc64: Merge ppc32 brcond2, setcond2, muluh
tcg-ppc64: Begin merging ppc32 with ppc64
tcg-ppc64: Fix sub2 implementation
tcg-ppc64: Merge 32-bit ABIs into the prologue / frame code
tcg-ppc64: Adjust tcg_out_call for ELFv2
tcg-ppc64: Support the ppc64 elfv2 ABI
tcg-ppc64: Use the correct test in tcg_out_call
tcg-ppc64: Better parameterize the stack frame
tcg-ppc64: Fix TCG_TARGET_CALL_STACK_OFFSET
tcg-ppc64: Move call macros out of tcg-target.h
tcg-ppc64: Make TCG_AREG0 and TCG_REG_CALL_STACK enum constants
...
Juan Quintela [Sat, 5 Apr 2014 18:16:22 +0000 (20:16 +0200)]
vmstate: Return error in case of error
If there is an error while loading a field, we should stop reading and
not continue with the rest of fields. And we should also set an error
in qemu_file.
Amit Shah [Fri, 20 Jun 2014 13:26:10 +0000 (18:56 +0530)]
tests: vmstate static checker: add dump1 and dump2 files
These are stripped-down JSON data as obtained from the -dump-vmstate
option. The two files are identical in this commit, and will be
modified in the later commits to show what the script does with the
data.
Amit Shah [Fri, 20 Jun 2014 13:26:08 +0000 (18:56 +0530)]
migration: dump vmstate info as a json file for static analysis
This commit adds a new command, '-dump-vmstate', that takes a filename
as an argument. When executed, QEMU will dump the vmstate information
for the machine type it's invoked with to the file, and quit.
The JSON-format output can then be used to compare the vmstate info for
different QEMU versions, specifically to test whether live migration
would break due to changes in the vmstate data.
A Python script that compares the output of such JSON dumps is included
in the following commit.
Michael R. Hines [Tue, 18 Feb 2014 02:34:06 +0000 (10:34 +0800)]
rdma: bug fixes
1. Fix small memory leak in parsing inet address from command line in data_init()
2. Fix ibv_post_send() return value check and pass error code back up correctly.
3. Fix rdma_destroy_qp() segfault after failure to connect to destination.
Peter Maydell [Mon, 23 Jun 2014 16:47:28 +0000 (17:47 +0100)]
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20140623-2' into staging
A couple of s390-ccw bios bugfixes: Fix booting for some bootmaps and get
the devices to a sane state before running the guest.
# gpg: Signature made Mon 23 Jun 2014 13:22:32 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found
* remotes/cohuck/tags/s390x-20140623-2:
pc-bios/s390-ccw: update s390-ccw.img binary
pc-bios/s390-ccw: fix for fragmented SCSI bootmap
pc-bios/s390-ccw: do a subsystem reset before running the guest
pc-bios/s390-ccw: virtio_load_direct() can't load max number of sectors
Paolo Bonzini [Wed, 18 Jun 2014 06:44:00 +0000 (08:44 +0200)]
monitor: protect event emission
Event emission must be protected by a mutex because of access to
the shared rate-limiting state, and to guard against concurrent
monitor "hot-plug" by means of human-monitor-command.
Paolo Bonzini [Wed, 18 Jun 2014 06:43:58 +0000 (08:43 +0200)]
qemu-char: make writes thread-safe
This will let threads other than the I/O thread raise QMP events.
GIOChannel is thread-safe, and send and receive state is usually
well-separated. The only driver that requires some care is the
pty driver, where some of the state is shared by the read and write
sides. That state is protected with the chr_write_lock too.
Wenchao Xia [Wed, 18 Jun 2014 06:43:50 +0000 (08:43 +0200)]
qapi event: convert SPICE events
SPICE_INITIALIZED, SPICE_CONNECTED, SPICE_DISCONNECTED and
SPICE_MIGRATE_COMPLETED are converted in one patch, since they
use some common functions. inet_strfamily() is removed since no
callers exist anymore.
Note that there is no existing doc for SPICE_MIGRATE_COMPLETED
in docs/qmp/qmp-events.txt before this patch.
Wenchao Xia [Wed, 18 Jun 2014 06:43:47 +0000 (08:43 +0200)]
qapi event: convert other BLOCK_JOB events
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are
related, convert them in one patch. The block_job_event_* functions
are used to keep encapsulation of BlockJob structure.
Don Slutz [Fri, 20 Jun 2014 01:40:25 +0000 (21:40 -0400)]
pc & q35: Add new machine opt max-ram-below-4g
This is a pc & q35 only machine opt.
If you add enough PCI devices then all mmio for them will not fit
below 4G which may not be the layout the user wanted. This allows
you to increase the below 4G address space that PCI devices can use
(aka decrease ram below 4G) and therefore in more cases not have any
mmio that is above 4G.
For example using "-machine pc,max-ram-below-4g=2G" on the command
line will limit the amount of ram that is below 4G to 2G.
Note: this machine option cannot be used to increase the amount
of ram below 4G.
Wenchao Xia [Wed, 18 Jun 2014 06:43:31 +0000 (08:43 +0200)]
monitor: add an implemention of qapi event emit method
The monitor is now hooked on the new event mechanism, so that later
patches can convert event callers one by one. Most code are copied from
old monitor_protocol_* functions with some modification.
Note that two build time warnings will be raised after this patch. One is
caused by no caller of monitor_qapi_event_throttle(), the other one is
caused by QAPI_EVENT_MAX = 0. They will be fixed automatically after
full event conversion later.
Wenchao Xia [Wed, 18 Jun 2014 06:43:30 +0000 (08:43 +0200)]
qapi: adjust existing defines
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Wenchao Xia [Wed, 18 Jun 2014 06:43:28 +0000 (08:43 +0200)]
qapi script: add event support
qapi-event.py will parse the schema and generate qapi-event.c, then
the API in qapi-event.c can be used to handle events in qemu code.
All API have prefix "qapi_event".
The script mainly includes two parts: generate API for each event
define, generate an enum type for all defined events.
Since in some cases the real emit behavior may change, for example,
qemu-img would not send a event, a callback layer is used to
control the behavior. As a result, the stubs at compile time
can be saved, the binding of block layer code and monitor code
will become looser.
Max Reitz [Wed, 18 Jun 2014 06:43:26 +0000 (08:43 +0200)]
qapi: Add includes from qapi/ as dependencies
qapi-schema.json has been split into three smaller JSON files in qapi/.
Add them as dependencies for the code generation in the Makefile, so
changes to them will result in a rebuilt of all QAPI-dependent code.
Wenchao Xia [Wed, 18 Jun 2014 06:43:25 +0000 (08:43 +0200)]
os-posix: include sys/time.h
Since gettimeofday() is used in this header file as a macro define,
include the function's define header file, to avoid compile warning
when other file include os-posix.h.
Amos Kong [Tue, 10 Jun 2014 11:25:53 +0000 (19:25 +0800)]
qapi: Suppress unwanted space between type and identifier
We always generate a space between type and identifier in parameter
and variable declarations, even when idiomatic C style doesn't have
a space there. Suppress it.
projects / qemu.git / log