Luiz Capitulino [Mon, 3 Jun 2013 15:14:26 +0000 (11:14 -0400)]
MAINTAINERS: split Monitor (QMP/HMP) entry
This entry doesn't reflect reality for a few years now. This commit
splits it into Human Monitor (HMP), QAPI and QMP. Markus is dropped
as a maintainer.
This is what we have been for the last few years. Also, it's going
to help me to offload some of this work to someone else in the near
future.
Luiz Capitulino [Mon, 3 Jun 2013 15:11:53 +0000 (11:11 -0400)]
MAINTAINERS: new maintainers for qapi-schema.json
I'm facing two problems lately wrt QMP patch review: increasingly
lack of bandwidth and lack of background in so many different areas
that are getting new QMP commands almost every week.
In order to help me mitigate this problem, I'm adding Eric and Markus
(besides me) as maintainers of the qapi-schema.json file.
Markus has been an old timer reviewer. Eric is being the most active
and prolific reviewer of QMP patches for some time now.
I believe Markus and Eric will keep doing their work as before, but
starting now I'll require the ACK of at least one of them before
appling a patch/series that touches the qapi-schema.json file.
Anthony Liguori [Fri, 7 Jun 2013 13:40:52 +0000 (08:40 -0500)]
Merge remote-tracking branch 'stefanha/block' into staging
# By Kevin Wolf (19) and others
# Via Stefan Hajnoczi
* stefanha/block: (26 commits)
hmp: add parameters device and -v for info block
hmp: show ImageInfo in 'info block'
qmp: add ImageInfo in BlockDeviceInfo used by query-block
block: add image info query function bdrv_query_image_info()
block: add snapshot info query function bdrv_query_snapshot_info_list()
ide-test: Add FLUSH CACHE test case
ide: Set BSY bit during FLUSH
ide-test: Add enum value for DEV
blkdebug: Add BLKDBG_FLUSH_TO_OS/DISK events
Make qemu-io commands available in HMP
qemu-io: Use the qemu version for -V
qemu-io: Interface cleanup
qemu-io: Move remaining helpers from cmd.c
qemu-io: Move command_loop() and friends
qemu-io: Move functions for registering and running commands
qemu-io: Move qemu_strsep() to cutils.c
qemu-io: Move 'quit' function
qemu-io: Move 'help' function
qemu-io: Factor out qemuio_command
qemu-io: Split off commands to qemu-io-cmds.c
...
Wenchao Xia [Thu, 6 Jun 2013 04:27:59 +0000 (12:27 +0800)]
qmp: add ImageInfo in BlockDeviceInfo used by query-block
Now image info will be retrieved as an embbed json object inside
BlockDeviceInfo, backing chain info and all related internal snapshot
info can be got in the enhanced recursive structure of ImageInfo. New
recursive member *backing-image is added to reflect the backing chain
status.
Wenchao Xia [Thu, 6 Jun 2013 04:27:58 +0000 (12:27 +0800)]
block: add image info query function bdrv_query_image_info()
This patch adds function bdrv_query_image_info(), which will
retrieve image info in qmp object format. The implementation is
based on the code moved from qemu-img.c, but uses block layer
function to get snapshot info.
Wenchao Xia [Thu, 6 Jun 2013 04:27:57 +0000 (12:27 +0800)]
block: add snapshot info query function bdrv_query_snapshot_info_list()
This patch adds function bdrv_query_snapshot_info_list(), which will
retrieve snapshot info of an image in qmp object format. The implementation
is based on the code moved from qemu-img.c with modification to fit more
for qmp based block layer API.
Andreas Färber [Wed, 5 Jun 2013 13:17:57 +0000 (15:17 +0200)]
ide: Set BSY bit during FLUSH
The implementation of the ATA FLUSH command invokes a flush at the block
layer, which may on raw files on POSIX entail a synchronous fdatasync().
This may in some cases take so long that the SLES 11 SP1 guest driver
reports I/O errors and filesystems get corrupted or remounted read-only.
Avoid this by setting BUSY_STAT, so that the guest is made aware we are
in the middle of an operation and no ATA commands are attempted to be
processed concurrently.
Kevin Wolf [Wed, 5 Jun 2013 12:19:41 +0000 (14:19 +0200)]
Make qemu-io commands available in HMP
It was decided to not make this command available in QMP in order to
make clear that this is not supposed to be a stable API and should be
used only for testing and debugging purposes.
Kevin Wolf [Wed, 5 Jun 2013 12:19:40 +0000 (14:19 +0200)]
qemu-io: Use the qemu version for -V
Always printing 0.0.1 and never updating the version number wasn't very
useful. qemu-io is released with qemu, so using the same version number
makes most sense.
Kevin Wolf [Wed, 5 Jun 2013 12:19:30 +0000 (14:19 +0200)]
qemu-io: Don't use global bs in command implementations
Pass in the BlockDriverState to the command handlers instead of using
the global variable. This is an important step to make the commands
usable outside of qemu-io.
Kevin Wolf [Wed, 5 Jun 2013 12:19:26 +0000 (14:19 +0200)]
qemu-io: Remove unused args_command
The original intention seems to be something with handling multiple
images at once, but this has never been implemented and the only
function ever registered is implemented to make everything behave like a
"global" command. Just do that unconditionally now.
Cornelia Huck [Wed, 5 Jun 2013 15:13:05 +0000 (17:13 +0200)]
virtio-ccw: Fix unsetting of indicators.
Interpretation of the ccws to register (configuration) indicators contained
a thinko: We want to disallow reading from 0, but setting the indicator
pointer to 0 is fine.
Let's fix the handling for CCW_CMD_SET{,_CONF}_IND.
Without this patch the guest pauses due to ENOMEDIUM. The guest is
stuck in a continuous pause loop since the I/O request is retried and
fails immediately again when the guest is resumed.
With this patch the error is reported to the guest.
Note that this scenario actually happens sometimes during libvirt disk
hot unplug, where device_del is followed by drive_del. I/O may still be
submitted to the drive after drive_del if the guest does not process the
PCI hot unplug notification.
Anthony Liguori [Tue, 4 Jun 2013 19:58:58 +0000 (14:58 -0500)]
Merge remote-tracking branch 'sstabellini/xen_fixes_20130603' into staging
* sstabellini/xen_fixes_20130603:
xen: use pc_init_pci instead of pc_init_pci_no_kvmclock
xen: remove xen_vcpu_init
xen: start PCI hole at 0xe0000000 (same as pc_init1 and qemu-xen-traditional)
xen_machine_pv: do not create a dummy CPU in machine->init
main_loop: do not set nonblocking if xen_enabled()
xen: simplify xen_enabled
Anthony Liguori [Tue, 4 Jun 2013 14:26:49 +0000 (09:26 -0500)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Stefan Hajnoczi (6) and others
# Via Kevin Wolf
* kwolf/for-anthony:
block: dump snapshot and image info to specified output
block: move qmp and info dump related code to block/qapi.c
block: move snapshot code in block.c to block/snapshot.c
block: drop bs_snapshots global variable
qemu-iotests: make create_image() common
qemu-iotests: make compare_images() common
qemu-iotests: make cancel_and_wait() common
qemu-iotests: make assert_no_active_block_jobs() common
block: add block driver read only whitelist
qemu-iotests: fix 054 cluster size help output
Anthony Liguori [Tue, 4 Jun 2013 14:26:29 +0000 (09:26 -0500)]
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci: misc cleanups
This includes some pci-related cleanups,
and fw cfg cleanups which will be useful for on-going
pci related work.
Signed-off-by: Michael S. Tsirkin <[email protected]>
# gpg: Signature made Sun 02 Jun 2013 02:46:52 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (8) and Laszlo Ersek (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pvpanic: use FWCfgState explicitly
fw_cfg: fw_cfg is a singleton
fw_cfg: add API to find FW cfg object
fw_cfg: move typedef to qemu/typedefs.h
refer to FWCfgState explicitly
apic: rename apic specific bitopts
firmware_abi: move to include/hw/nvram/
dec.c - move to pci-bridge
q35: set fw_name
Wenchao Xia [Sat, 25 May 2013 03:09:45 +0000 (11:09 +0800)]
block: dump snapshot and image info to specified output
bdrv_snapshot_dump() and bdrv_image_info_dump() do not dump to a buffer now,
some internal buffers are still used for format control, which have no
chance to be truncated. As a result, these two functions have no more issue
of truncation, and they can be used by both qemu and qemu-img with correct
parameter specified.
Wenchao Xia [Sat, 25 May 2013 03:09:44 +0000 (11:09 +0800)]
block: move qmp and info dump related code to block/qapi.c
This patch is a pure code move patch, except following modification:
1 get_human_readable_size() is changed to static function.
2 dump_human_image_info() is renamed to bdrv_image_info_dump().
3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs)
instead of direct traverse of global array 'bdrv_states'.
4 collect_snapshots() and collect_image_info() are renamed, unused parameter
*fmt in collect_image_info() is removed.
5 code style fix.
To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H
instead of QAPI_H. Now block.h and snapshot.h are at the same level in
include path, block_int.h and qapi.h will both include them.
Wenchao Xia [Sat, 25 May 2013 03:09:43 +0000 (11:09 +0800)]
block: move snapshot code in block.c to block/snapshot.c
All snapshot related code, except bdrv_snapshot_dump() and
bdrv_is_snapshot(), is moved to block/snapshot.c. bdrv_snapshot_dump()
will be moved to another file later. bdrv_is_snapshot() is not related
with internal snapshot. It also fixes small code style errors reported
by check script.
Stefan Hajnoczi [Sat, 25 May 2013 03:09:42 +0000 (11:09 +0800)]
block: drop bs_snapshots global variable
The bs_snapshots global variable points to the BlockDriverState which
will be used to save vmstate. This is really a savevm.c concept but was
moved into block.c:bdrv_snapshots() when it became clear that hotplug
could result in a dangling pointer.
While auditing the block layer's global state I came upon bs_snapshots
and realized that a variable is not necessary here. Simply find the
first BlockDriverState capable of internal snapshots each time this is
needed.
The behavior of bdrv_snapshots() is preserved across hotplug because new
drives are always appended to the bdrv_states list. This means that
calling the new find_vmstate_bs() function is idempotent - it returns
the same BlockDriverState unless it was hot-unplugged.
Stefan Hajnoczi [Tue, 28 May 2013 15:11:36 +0000 (17:11 +0200)]
qemu-iotests: make compare_images() common
The iotests.compare_images() function returns True if two image files
have the identical data. Previously this was implemented by converting
images to raw and then comparing their contents using Python. Since
"qemu-img compare" is now available and is more efficient, switch to it.
This function will be reused by the 'drive-backup' test case.
Stefan Hajnoczi [Tue, 28 May 2013 15:11:35 +0000 (17:11 +0200)]
qemu-iotests: make cancel_and_wait() common
The cancel_and_wait() function has been duplicated in 030 and 041. Move
it into iotests.py and let it return the event so tests can perform
additional asserts.
Note that 041's cancel_and_wait(wait_ready=True) is replaced by
wait_ready_and_cancel(), which uses the new wait_ready() and
cancel_and_wait() underneath.
Stefan Hajnoczi [Tue, 28 May 2013 15:11:34 +0000 (17:11 +0200)]
qemu-iotests: make assert_no_active_block_jobs() common
Tests 030 and 041 both use query-block-jobs to check whether any block
jobs are active. Make this code common so that 'drive-backup' and other
new feature tests will be able to reuse it.
Fam Zheng [Wed, 29 May 2013 11:35:40 +0000 (19:35 +0800)]
block: add block driver read only whitelist
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.
Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.
E.g. To include vmdk readonly, and others read+write:
./configure --target-list=x86_64-softmmu \
--block-drv-rw-whitelist=qcow2,raw,file,qed \
--block-drv-ro-whitelist=vmdk
Stefan Hajnoczi [Tue, 28 May 2013 09:19:51 +0000 (11:19 +0200)]
qemu-iotests: fix 054 cluster size help output
Commit f3f4d2c09b9cf46903ba38425ec46c44185162bd added a hint to increase
the cluster size when a large image cannot be created. Test 054 now has
outdated output and fails because the golden output does not match.
Peter Maydell [Mon, 20 May 2013 15:16:16 +0000 (16:16 +0100)]
configure: Report unknown target names more helpfully
If the user specifies a target list themselves, check each entry
to make sure it's a target we recognise. This allows us to print
a helpful error message, rather than falling through (where we
would probably eventually end up hitting the uninformative
"ERROR: Unsupported target CPU").
Peter Maydell [Mon, 20 May 2013 15:16:15 +0000 (16:16 +0100)]
configure: Autogenerate default target list
Autogenerate the default target list based on what files exist
in default-configs; this allows us to remove one of the places
that has to be kept up to date with a complete list of every
target we support.
Igor Mitsyanko [Mon, 3 Jun 2013 16:17:46 +0000 (17:17 +0100)]
exynos4210.c: register rom_mem for memory migration
Even if we do not register newly created RAM MemoryRegion for migration with
vmstate_register_ram_global() function, ram_save_setup() still saves this region
to snapshot file with empty idstr=="". Consequently this results in error during
VM loading in ram_load().
Register rom_mem for migration.
Igor Mitsyanko [Mon, 3 Jun 2013 16:17:46 +0000 (17:17 +0100)]
hw/arm/exynos4210.c: convert chipid_and_omr to an mmio region
Exynos SoC was misusing memory_region_init_ram_ptr(): this interface can safely
be used only for memory regions which size is a multiple of target page size.
Change chipid_and_omr memory to an mmio region to fix this.
QEMU models two (of the three) ACMD41 has two modes, "inquiry" and
"first". The selection logic for which of the two is incorrect - it
compares != 0 for the entire argument value rather than only bits 23:0
as per the spec. Fix.
The end of transfer check was occurring and potentially returning before
the interrupt flag was checked. This means the interrupt will be missed
if it occurs on the last packet. Fix by checking for the interrupt
before checking for the end of transfer.
This message was printing out the data in decimal only, which is not
very friendly to the debugging developer. Add hex variant in
parenthesis to make it consistent with other similar messages in this
module.
The data_count variable was being reset on every transfer, including
DMA transfer resumptions. This is incorrect, it should only be set
on a new command.
Manifests as a bug when using ADMA and there is a timer delay between
ADMA frames where the fifo is left in a non empty state.
The LQSPI bus attachment supports byte/halfword and misaligned
accesses. Fixed. Refactored the LQSPI cache to be byte-wise
instead of word wise accordingly.
Do 16 words per fifo flush. Increases performance and decreases
debug verbosity. This data depth has no real hardware analogue,
so just go with something that has reasonable performance.
The QSPI controller was using byte-wide stripes when striping across
the two flashes in dual parallel mode. The real hardware however uses
individual bit striping. QEMU misbehaves in the (corner) case where
data is written/read in dual-parallel mode and read/written back in
single mode.
The CTRL register was RAZ/WI on some of the RW bits. Even though the
function behind these bits is invalid in QEMU, they should still be
guest accessible. Fix.
The LQSPI mode is supposed to work via the automatic CS mode feature
rather than manipulate CS lines itself. Now that auto CS is implemented
remove LQSPIs CS mode override logic. There is still a need to
manipulate the U_PAGE bit in LQSPI config register to implement
dual-stack mode however.
Invalidate the LQSPI cached page when transitioning into LQSPI mode.
Otherwise there is a possibility that the controller will return stale
data to the guest when transitioning back to LQ_MODE after a page
program.
xen: start PCI hole at 0xe0000000 (same as pc_init1 and qemu-xen-traditional)
We are currently setting the PCI hole to start at HVM_BELOW_4G_RAM_END,
that is 0xf0000000.
Start the PCI hole at 0xe0000000 instead, that is the same value used by
pc_init1 and qemu-xen-traditional.
target-i386: Attach ICC bus to CPU on its creation
X86CPU should have parent bus so it could provide bus for child APIC.
The commit makes it mandatory to pass a valid ICC bus to cpu_x86_create,
but cpu_x86_init just passes NULL to it.
xen_machine_pv uses cpu_x86_init, therefore it has been broken.
This patch fixes the problem by removing the dummy CPU creation
altogether from xen_init_pv, relying on the fact that QEMU can now cope
with a machine without an emulated CPU.
Anthony Liguori [Mon, 3 Jun 2013 13:37:54 +0000 (08:37 -0500)]
Merge remote-tracking branch 'kraxel/usb.83' into staging
# By Gerd Hoffmann (5) and others
# Via Gerd Hoffmann
* kraxel/usb.83:
xhci: add live migration support
xhci: add xhci_init_epctx
xhci: add xhci_alloc_epctx
xhci: add XHCISlot->addressed
pci: add VMSTATE_MSIX
host-libusb: Correct test for USB packet state
Fix usage of USB_DEV_FLAG_IS_HOST flag.
Anthony Liguori [Mon, 3 Jun 2013 13:37:44 +0000 (08:37 -0500)]
Merge remote-tracking branch 'mjt/trivial-patches' into staging
# By Ed Maste (3) and others
# Via Michael Tokarev
* mjt/trivial-patches:
do not check pointers after dereferencing them
m25p80: Add Micron n25q032a
qemu: fix out of tree cross compile
slirp: cleanup leftovers from misc.h
migration: Remove duplicate bandwidth_limit set
docs: Fix typo and update file in migration
configure: try pkg-config ncurses first
rtc: remove rtc_set_date
linux-user: Fix typo in comment
configure: remove confusing file manipulation
debugcon: fix compiler warning when open DEBUG_DEBUGCON
debugcon: make debug message more readable
debugcon: fix always print "addr=0x0, val=0x0" bug when use DEBUG_DEBUGCON
Remove unnecessary break statements
don't run pkg-config for features explicitly disabled
Commit d08151bf (conversion of tcx to the memory API) broke the 24-bit mode of
the tcx display adapter by accidentally passing in the final address of the
dirty region to memory_region_reset_dirty() instead of its size.
Remove some code duplication by adding a
function to look up the fw cfg file.
This way, we don't need to duplicate same strings everywhere.
Use by both fw cfg and pvpanic device.
firmware_abi.h with structs for OpenBIOS landed in hw/sparc/ by mistake
- move it to hw/nvram/ alongside fw_cfg.h. In addition to sparc it's
included from ppc mac_nvram.c and will need to include it from prep.c in
the future.
projects / qemu.git / log