common-obj-$(CONFIG_SLAVIO) += slavio_timer.o
common-obj-$(CONFIG_ETRAXFS) += etraxfs_timer.o
common-obj-$(CONFIG_GRLIB) += grlib_gptimer.o
-common-obj-$(CONFIG_IMX) += imx_timer.o
+common-obj-$(CONFIG_IMX) += imx_epit.o
+common-obj-$(CONFIG_IMX) += imx_gpt.o
common-obj-$(CONFIG_LM32) += lm32_timer.o
common-obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o
--- /dev/null
+/*
+ * IMX EPIT Timer
+ *
+ * Copyright (c) 2008 OK Labs
+ * Copyright (c) 2011 NICTA Pty Ltd
+ * Originally written by Hans Jiang
+ * Updated by Peter Chubb
+ *
+ * This code is licensed under GPL version 2 or later. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include "hw/hw.h"
+#include "qemu/bitops.h"
+#include "qemu/timer.h"
+#include "hw/ptimer.h"
+#include "hw/sysbus.h"
+#include "hw/arm/imx.h"
+
+//#define DEBUG_TIMER 1
+#ifdef DEBUG_TIMER
+# define DPRINTF(fmt, args...) \
+ do { printf("imx_timer: " fmt , ##args); } while (0)
+#else
+# define DPRINTF(fmt, args...) do {} while (0)
+#endif
+
+/*
+ * Define to 1 for messages about attempts to
+ * access unimplemented registers or similar.
+ */
+#define DEBUG_IMPLEMENTATION 1
+#if DEBUG_IMPLEMENTATION
+# define IPRINTF(fmt, args...) \
+ do { fprintf(stderr, "imx_timer: " fmt, ##args); } while (0)
+#else
+# define IPRINTF(fmt, args...) do {} while (0)
+#endif
+
+/*
+ * EPIT: Enhanced periodic interrupt timer
+ */
+
+#define CR_EN (1 << 0)
+#define CR_ENMOD (1 << 1)
+#define CR_OCIEN (1 << 2)
+#define CR_RLD (1 << 3)
+#define CR_PRESCALE_SHIFT (4)
+#define CR_PRESCALE_MASK (0xfff)
+#define CR_SWR (1 << 16)
+#define CR_IOVW (1 << 17)
+#define CR_DBGEN (1 << 18)
+#define CR_WAITEN (1 << 19)
+#define CR_DOZEN (1 << 20)
+#define CR_STOPEN (1 << 21)
+#define CR_CLKSRC_SHIFT (24)
+#define CR_CLKSRC_MASK (0x3 << CR_CLKSRC_SHIFT)
+
+#define TIMER_MAX 0XFFFFFFFFUL
+
+/*
+ * Exact clock frequencies vary from board to board.
+ * These are typical.
+ */
+static const IMXClk imx_timerp_clocks[] = {
+ 0, /* 00 disabled */
+ IPG, /* 01 ipg_clk, ~532MHz */
+ IPG, /* 10 ipg_clk_highfreq */
+ CLK_32k, /* 11 ipg_clk_32k -- ~32kHz */
+};
+
+typedef struct {
+ SysBusDevice busdev;
+ ptimer_state *timer_reload;
+ ptimer_state *timer_cmp;
+ MemoryRegion iomem;
+ DeviceState *ccm;
+
+ uint32_t cr;
+ uint32_t sr;
+ uint32_t lr;
+ uint32_t cmp;
+ uint32_t cnt;
+
+ uint32_t freq;
+ qemu_irq irq;
+} IMXTimerPState;
+
+/*
+ * Update interrupt status
+ */
+static void imx_timerp_update(IMXTimerPState *s)
+{
+ if (s->sr && (s->cr & CR_OCIEN)) {
+ qemu_irq_raise(s->irq);
+ } else {
+ qemu_irq_lower(s->irq);
+ }
+}
+
+static void set_timerp_freq(IMXTimerPState *s)
+{
+ unsigned clksrc;
+ unsigned prescaler;
+ uint32_t freq;
+
+ clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, 2);
+ prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, 12);
+
+ freq = imx_clock_frequency(s->ccm, imx_timerp_clocks[clksrc]) / prescaler;
+
+ s->freq = freq;
+ DPRINTF("Setting ptimer frequency to %u\n", freq);
+
+ if (freq) {
+ ptimer_set_freq(s->timer_reload, freq);
+ ptimer_set_freq(s->timer_cmp, freq);
+ }
+}
+
+static void imx_timerp_reset(DeviceState *dev)
+{
+ IMXTimerPState *s = container_of(dev, IMXTimerPState, busdev.qdev);
+
+ /*
+ * Soft reset doesn't touch some bits; hard reset clears them
+ */
+ s->cr &= ~(CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN);
+ s->sr = 0;
+ s->lr = TIMER_MAX;
+ s->cmp = 0;
+ s->cnt = 0;
+ /* stop both timers */
+ ptimer_stop(s->timer_cmp);
+ ptimer_stop(s->timer_reload);
+ /* compute new frequency */
+ set_timerp_freq(s);
+ /* init both timers to TIMER_MAX */
+ ptimer_set_limit(s->timer_cmp, TIMER_MAX, 1);
+ ptimer_set_limit(s->timer_reload, TIMER_MAX, 1);
+ if (s->freq && (s->cr & CR_EN)) {
+ /* if the timer is still enabled, restart it */
+ ptimer_run(s->timer_reload, 1);
+ }
+}
+
+static uint32_t imx_timerp_update_counts(IMXTimerPState *s)
+{
+ s->cnt = ptimer_get_count(s->timer_reload);
+
+ return s->cnt;
+}
+
+static uint64_t imx_timerp_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ IMXTimerPState *s = (IMXTimerPState *)opaque;
+
+ DPRINTF("p-read(offset=%x)", (unsigned int)(offset >> 2));
+ switch (offset >> 2) {
+ case 0: /* Control Register */
+ DPRINTF("cr %x\n", s->cr);
+ return s->cr;
+
+ case 1: /* Status Register */
+ DPRINTF("sr %x\n", s->sr);
+ return s->sr;
+
+ case 2: /* LR - ticks*/
+ DPRINTF("lr %x\n", s->lr);
+ return s->lr;
+
+ case 3: /* CMP */
+ DPRINTF("cmp %x\n", s->cmp);
+ return s->cmp;
+
+ case 4: /* CNT */
+ imx_timerp_update_counts(s);
+ DPRINTF(" cnt = %x\n", s->cnt);
+ return s->cnt;
+ }
+
+ IPRINTF("imx_timerp_read: Bad offset %x\n",
+ (int)offset >> 2);
+ return 0;
+}
+
+static void imx_reload_compare_timer(IMXTimerPState *s)
+{
+ if ((s->cr & CR_OCIEN) && s->cmp) {
+ /* if the compare feature is on */
+ uint32_t tmp = imx_timerp_update_counts(s);
+ if (tmp > s->cmp) {
+ /* reinit the cmp timer if required */
+ ptimer_set_count(s->timer_cmp, tmp - s->cmp);
+ if ((s->cr & CR_EN)) {
+ /* Restart the cmp timer if required */
+ ptimer_run(s->timer_cmp, 0);
+ }
+ }
+ }
+}
+
+static void imx_timerp_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size)
+{
+ IMXTimerPState *s = (IMXTimerPState *)opaque;
+ DPRINTF("p-write(offset=%x, value = %x)\n", (unsigned int)offset >> 2,
+ (unsigned int)value);
+
+ switch (offset >> 2) {
+ case 0: /* CR */
+ s->cr = value & 0x03ffffff;
+ if (s->cr & CR_SWR) {
+ /* handle the reset */
+ imx_timerp_reset(&s->busdev.qdev);
+ } else {
+ set_timerp_freq(s);
+ }
+
+ if (s->freq && (s->cr & CR_EN)) {
+ if (s->cr & CR_ENMOD) {
+ if (s->cr & CR_RLD) {
+ ptimer_set_limit(s->timer_reload, s->lr, 1);
+ } else {
+ ptimer_set_limit(s->timer_reload, TIMER_MAX, 1);
+ }
+ }
+
+ imx_reload_compare_timer(s);
+
+ ptimer_run(s->timer_reload, 1);
+ } else {
+ /* stop both timers */
+ ptimer_stop(s->timer_reload);
+ ptimer_stop(s->timer_cmp);
+ }
+ break;
+
+ case 1: /* SR - ACK*/
+ /* writing 1 to OCIF clear the OCIF bit */
+ if (value & 0x01) {
+ s->sr = 0;
+ imx_timerp_update(s);
+ }
+ break;
+
+ case 2: /* LR - set ticks */
+ s->lr = value;
+
+ if (s->cr & CR_RLD) {
+ /* Also set the limit if the LRD bit is set */
+ /* If IOVW bit is set then set the timer value */
+ ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW);
+ } else if (s->cr & CR_IOVW) {
+ /* If IOVW bit is set then set the timer value */
+ ptimer_set_count(s->timer_reload, s->lr);
+ }
+
+ imx_reload_compare_timer(s);
+
+ break;
+
+ case 3: /* CMP */
+ s->cmp = value;
+
+ imx_reload_compare_timer(s);
+
+ break;
+
+ default:
+ IPRINTF("imx_timerp_write: Bad offset %x\n",
+ (int)offset >> 2);
+ }
+}
+
+static void imx_timerp_reload(void *opaque)
+{
+ IMXTimerPState *s = (IMXTimerPState *)opaque;
+
+ DPRINTF("imxp reload\n");
+
+ if (!(s->cr & CR_EN)) {
+ return;
+ }
+
+ if (s->cr & CR_RLD) {
+ ptimer_set_limit(s->timer_reload, s->lr, 1);
+ } else {
+ ptimer_set_limit(s->timer_reload, TIMER_MAX, 1);
+ }
+
+ if (s->cr & CR_OCIEN) {
+ /* if compare register is 0 then we handle the interrupt here */
+ if (s->cmp == 0) {
+ s->sr = 1;
+ imx_timerp_update(s);
+ } else if (s->cmp <= s->lr) {
+ /* We should launch the compare register */
+ ptimer_set_count(s->timer_cmp, s->lr - s->cmp);
+ ptimer_run(s->timer_cmp, 0);
+ } else {
+ IPRINTF("imxp reload: s->lr < s->cmp\n");
+ }
+ }
+}
+
+static void imx_timerp_cmp(void *opaque)
+{
+ IMXTimerPState *s = (IMXTimerPState *)opaque;
+
+ DPRINTF("imxp compare\n");
+
+ ptimer_stop(s->timer_cmp);
+
+ /* compare register is not 0 */
+ if (s->cmp) {
+ s->sr = 1;
+ imx_timerp_update(s);
+ }
+}
+
+void imx_timerp_create(const hwaddr addr,
+ qemu_irq irq,
+ DeviceState *ccm)
+{
+ IMXTimerPState *pp;
+ DeviceState *dev;
+
+ dev = sysbus_create_simple("imx_timerp", addr, irq);
+ pp = container_of(dev, IMXTimerPState, busdev.qdev);
+ pp->ccm = ccm;
+}
+
+static const MemoryRegionOps imx_timerp_ops = {
+ .read = imx_timerp_read,
+ .write = imx_timerp_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const VMStateDescription vmstate_imx_timerp = {
+ .name = "imx-timerp",
+ .version_id = 2,
+ .minimum_version_id = 2,
+ .minimum_version_id_old = 2,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(cr, IMXTimerPState),
+ VMSTATE_UINT32(sr, IMXTimerPState),
+ VMSTATE_UINT32(lr, IMXTimerPState),
+ VMSTATE_UINT32(cmp, IMXTimerPState),
+ VMSTATE_UINT32(cnt, IMXTimerPState),
+ VMSTATE_UINT32(freq, IMXTimerPState),
+ VMSTATE_PTIMER(timer_reload, IMXTimerPState),
+ VMSTATE_PTIMER(timer_cmp, IMXTimerPState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static int imx_timerp_init(SysBusDevice *dev)
+{
+ IMXTimerPState *s = FROM_SYSBUS(IMXTimerPState, dev);
+ QEMUBH *bh;
+
+ DPRINTF("imx_timerp_init\n");
+ sysbus_init_irq(dev, &s->irq);
+ memory_region_init_io(&s->iomem, &imx_timerp_ops,
+ s, "imxp-timer",
+ 0x00001000);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ bh = qemu_bh_new(imx_timerp_reload, s);
+ s->timer_reload = ptimer_init(bh);
+
+ bh = qemu_bh_new(imx_timerp_cmp, s);
+ s->timer_cmp = ptimer_init(bh);
+
+ return 0;
+}
+
+
+static void imx_timerp_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+ k->init = imx_timerp_init;
+ dc->vmsd = &vmstate_imx_timerp;
+ dc->reset = imx_timerp_reset;
+ dc->desc = "i.MX periodic timer";
+}
+
+static const TypeInfo imx_timerp_info = {
+ .name = "imx_timerp",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IMXTimerPState),
+ .class_init = imx_timerp_class_init,
+};
+
+static void imx_timer_register_types(void)
+{
+ type_register_static(&imx_timerp_info);
+}
+
+type_init(imx_timer_register_types)
--- /dev/null
+/*
+ * IMX GPT Timer
+ *
+ * Copyright (c) 2008 OK Labs
+ * Copyright (c) 2011 NICTA Pty Ltd
+ * Originally written by Hans Jiang
+ * Updated by Peter Chubb
+ *
+ * This code is licensed under GPL version 2 or later. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include "hw/hw.h"
+#include "qemu/bitops.h"
+#include "qemu/timer.h"
+#include "hw/ptimer.h"
+#include "hw/sysbus.h"
+#include "hw/arm/imx.h"
+
+//#define DEBUG_TIMER 1
+#ifdef DEBUG_TIMER
+# define DPRINTF(fmt, args...) \
+ do { printf("imx_timer: " fmt , ##args); } while (0)
+#else
+# define DPRINTF(fmt, args...) do {} while (0)
+#endif
+
+/*
+ * Define to 1 for messages about attempts to
+ * access unimplemented registers or similar.
+ */
+#define DEBUG_IMPLEMENTATION 1
+#if DEBUG_IMPLEMENTATION
+# define IPRINTF(fmt, args...) \
+ do { fprintf(stderr, "imx_timer: " fmt, ##args); } while (0)
+#else
+# define IPRINTF(fmt, args...) do {} while (0)
+#endif
+
+/*
+ * GPT : General purpose timer
+ *
+ * This timer counts up continuously while it is enabled, resetting itself
+ * to 0 when it reaches TIMER_MAX (in freerun mode) or when it
+ * reaches the value of ocr1 (in periodic mode). WE simulate this using a
+ * QEMU ptimer counting down from ocr1 and reloading from ocr1 in
+ * periodic mode, or counting from ocr1 to zero, then TIMER_MAX - ocr1.
+ * waiting_rov is set when counting from TIMER_MAX.
+ *
+ * In the real hardware, there are three comparison registers that can
+ * trigger interrupts, and compare channel 1 can be used to
+ * force-reset the timer. However, this is a `bare-bones'
+ * implementation: only what Linux 3.x uses has been implemented
+ * (free-running timer from 0 to OCR1 or TIMER_MAX) .
+ */
+
+#define TIMER_MAX 0XFFFFFFFFUL
+
+/* Control register. Not all of these bits have any effect (yet) */
+#define GPT_CR_EN (1 << 0) /* GPT Enable */
+#define GPT_CR_ENMOD (1 << 1) /* GPT Enable Mode */
+#define GPT_CR_DBGEN (1 << 2) /* GPT Debug mode enable */
+#define GPT_CR_WAITEN (1 << 3) /* GPT Wait Mode Enable */
+#define GPT_CR_DOZEN (1 << 4) /* GPT Doze mode enable */
+#define GPT_CR_STOPEN (1 << 5) /* GPT Stop Mode Enable */
+#define GPT_CR_CLKSRC_SHIFT (6)
+#define GPT_CR_CLKSRC_MASK (0x7)
+
+#define GPT_CR_FRR (1 << 9) /* Freerun or Restart */
+#define GPT_CR_SWR (1 << 15) /* Software Reset */
+#define GPT_CR_IM1 (3 << 16) /* Input capture channel 1 mode (2 bits) */
+#define GPT_CR_IM2 (3 << 18) /* Input capture channel 2 mode (2 bits) */
+#define GPT_CR_OM1 (7 << 20) /* Output Compare Channel 1 Mode (3 bits) */
+#define GPT_CR_OM2 (7 << 23) /* Output Compare Channel 2 Mode (3 bits) */
+#define GPT_CR_OM3 (7 << 26) /* Output Compare Channel 3 Mode (3 bits) */
+#define GPT_CR_FO1 (1 << 29) /* Force Output Compare Channel 1 */
+#define GPT_CR_FO2 (1 << 30) /* Force Output Compare Channel 2 */
+#define GPT_CR_FO3 (1 << 31) /* Force Output Compare Channel 3 */
+
+#define GPT_SR_OF1 (1 << 0)
+#define GPT_SR_ROV (1 << 5)
+
+#define GPT_IR_OF1IE (1 << 0)
+#define GPT_IR_ROVIE (1 << 5)
+
+typedef struct {
+ SysBusDevice busdev;
+ ptimer_state *timer;
+ MemoryRegion iomem;
+ DeviceState *ccm;
+
+ uint32_t cr;
+ uint32_t pr;
+ uint32_t sr;
+ uint32_t ir;
+ uint32_t ocr1;
+ uint32_t ocr2;
+ uint32_t ocr3;
+ uint32_t icr1;
+ uint32_t icr2;
+ uint32_t cnt;
+
+ uint32_t waiting_rov;
+ qemu_irq irq;
+} IMXTimerGState;
+
+static const VMStateDescription vmstate_imx_timerg = {
+ .name = "imx-timerg",
+ .version_id = 2,
+ .minimum_version_id = 2,
+ .minimum_version_id_old = 2,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(cr, IMXTimerGState),
+ VMSTATE_UINT32(pr, IMXTimerGState),
+ VMSTATE_UINT32(sr, IMXTimerGState),
+ VMSTATE_UINT32(ir, IMXTimerGState),
+ VMSTATE_UINT32(ocr1, IMXTimerGState),
+ VMSTATE_UINT32(ocr2, IMXTimerGState),
+ VMSTATE_UINT32(ocr3, IMXTimerGState),
+ VMSTATE_UINT32(icr1, IMXTimerGState),
+ VMSTATE_UINT32(icr2, IMXTimerGState),
+ VMSTATE_UINT32(cnt, IMXTimerGState),
+ VMSTATE_UINT32(waiting_rov, IMXTimerGState),
+ VMSTATE_PTIMER(timer, IMXTimerGState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const IMXClk imx_timerg_clocks[] = {
+ NOCLK, /* 000 No clock source */
+ IPG, /* 001 ipg_clk, 532MHz*/
+ IPG, /* 010 ipg_clk_highfreq */
+ NOCLK, /* 011 not defined */
+ CLK_32k, /* 100 ipg_clk_32k */
+ NOCLK, /* 101 not defined */
+ NOCLK, /* 110 not defined */
+ NOCLK, /* 111 not defined */
+};
+
+
+static void imx_timerg_set_freq(IMXTimerGState *s)
+{
+ int clksrc;
+ uint32_t freq;
+
+ clksrc = (s->cr >> GPT_CR_CLKSRC_SHIFT) & GPT_CR_CLKSRC_MASK;
+ freq = imx_clock_frequency(s->ccm, imx_timerg_clocks[clksrc]) / (1 + s->pr);
+
+ DPRINTF("Setting gtimer clksrc %d to frequency %d\n", clksrc, freq);
+
+ if (freq) {
+ ptimer_set_freq(s->timer, freq);
+ }
+}
+
+static void imx_timerg_update(IMXTimerGState *s)
+{
+ uint32_t flags = s->sr & s->ir & (GPT_SR_OF1 | GPT_SR_ROV);
+
+ DPRINTF("g-timer SR: %s %s IR=%s %s, %s\n",
+ s->sr & GPT_SR_OF1 ? "OF1" : "",
+ s->sr & GPT_SR_ROV ? "ROV" : "",
+ s->ir & GPT_SR_OF1 ? "OF1" : "",
+ s->ir & GPT_SR_ROV ? "ROV" : "",
+ s->cr & GPT_CR_EN ? "CR_EN" : "Not Enabled");
+
+ qemu_set_irq(s->irq, (s->cr & GPT_CR_EN) && flags);
+}
+
+static uint32_t imx_timerg_update_counts(IMXTimerGState *s)
+{
+ uint64_t target = s->waiting_rov ? TIMER_MAX : s->ocr1;
+ uint64_t cnt = ptimer_get_count(s->timer);
+ s->cnt = target - cnt;
+ return s->cnt;
+}
+
+static void imx_timerg_reload(IMXTimerGState *s, uint32_t timeout)
+{
+ uint64_t diff_cnt;
+
+ if (!(s->cr & GPT_CR_FRR)) {
+ IPRINTF("IMX_timerg_reload --- called in reset-mode\n");
+ return;
+ }
+
+ /*
+ * For small timeouts, qemu sometimes runs too slow.
+ * Better deliver a late interrupt than none.
+ *
+ * In Reset mode (FRR bit clear)
+ * the ptimer reloads itself from OCR1;
+ * in free-running mode we need to fake
+ * running from 0 to ocr1 to TIMER_MAX
+ */
+ if (timeout > s->cnt) {
+ diff_cnt = timeout - s->cnt;
+ } else {
+ diff_cnt = 0;
+ }
+ ptimer_set_count(s->timer, diff_cnt);
+}
+
+static uint64_t imx_timerg_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ IMXTimerGState *s = (IMXTimerGState *)opaque;
+
+ DPRINTF("g-read(offset=%x)", (unsigned int)(offset >> 2));
+ switch (offset >> 2) {
+ case 0: /* Control Register */
+ DPRINTF(" cr = %x\n", s->cr);
+ return s->cr;
+
+ case 1: /* prescaler */
+ DPRINTF(" pr = %x\n", s->pr);
+ return s->pr;
+
+ case 2: /* Status Register */
+ DPRINTF(" sr = %x\n", s->sr);
+ return s->sr;
+
+ case 3: /* Interrupt Register */
+ DPRINTF(" ir = %x\n", s->ir);
+ return s->ir;
+
+ case 4: /* Output Compare Register 1 */
+ DPRINTF(" ocr1 = %x\n", s->ocr1);
+ return s->ocr1;
+
+ case 5: /* Output Compare Register 2 */
+ DPRINTF(" ocr2 = %x\n", s->ocr2);
+ return s->ocr2;
+
+ case 6: /* Output Compare Register 3 */
+ DPRINTF(" ocr3 = %x\n", s->ocr3);
+ return s->ocr3;
+
+ case 7: /* input Capture Register 1 */
+ DPRINTF(" icr1 = %x\n", s->icr1);
+ return s->icr1;
+
+ case 8: /* input Capture Register 2 */
+ DPRINTF(" icr2 = %x\n", s->icr2);
+ return s->icr2;
+
+ case 9: /* cnt */
+ imx_timerg_update_counts(s);
+ DPRINTF(" cnt = %x\n", s->cnt);
+ return s->cnt;
+ }
+
+ IPRINTF("imx_timerg_read: Bad offset %x\n",
+ (int)offset >> 2);
+
+ return 0;
+}
+
+static void imx_timerg_reset(DeviceState *dev)
+{
+ IMXTimerGState *s = container_of(dev, IMXTimerGState, busdev.qdev);
+
+ /*
+ * Soft reset doesn't touch some bits; hard reset clears them
+ */
+ s->cr &= ~(GPT_CR_EN|GPT_CR_ENMOD|GPT_CR_STOPEN|GPT_CR_DOZEN|
+ GPT_CR_WAITEN|GPT_CR_DBGEN);
+ s->sr = 0;
+ s->pr = 0;
+ s->ir = 0;
+ s->cnt = 0;
+ s->ocr1 = TIMER_MAX;
+ s->ocr2 = TIMER_MAX;
+ s->ocr3 = TIMER_MAX;
+ s->icr1 = 0;
+ s->icr2 = 0;
+ ptimer_stop(s->timer);
+ ptimer_set_limit(s->timer, TIMER_MAX, 1);
+ ptimer_set_count(s->timer, TIMER_MAX);
+ imx_timerg_set_freq(s);
+}
+
+static void imx_timerg_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size)
+{
+ IMXTimerGState *s = (IMXTimerGState *)opaque;
+ DPRINTF("g-write(offset=%x, value = 0x%x)\n", (unsigned int)offset >> 2,
+ (unsigned int)value);
+
+ switch (offset >> 2) {
+ case 0: {
+ uint32_t oldcr = s->cr;
+ /* CR */
+ if (value & GPT_CR_SWR) { /* force reset */
+ value &= ~GPT_CR_SWR;
+ imx_timerg_reset(&s->busdev.qdev);
+ imx_timerg_update(s);
+ }
+
+ s->cr = value & ~0x7c00;
+ imx_timerg_set_freq(s);
+ if ((oldcr ^ value) & GPT_CR_EN) {
+ if (value & GPT_CR_EN) {
+ if (value & GPT_CR_ENMOD) {
+ ptimer_set_count(s->timer, s->ocr1);
+ s->cnt = 0;
+ }
+ ptimer_run(s->timer,
+ (value & GPT_CR_FRR) && (s->ocr1 != TIMER_MAX));
+ } else {
+ ptimer_stop(s->timer);
+ };
+ }
+ return;
+ }
+
+ case 1: /* Prescaler */
+ s->pr = value & 0xfff;
+ imx_timerg_set_freq(s);
+ return;
+
+ case 2: /* SR */
+ /*
+ * No point in implementing the status register bits to do with
+ * external interrupt sources.
+ */
+ value &= GPT_SR_OF1 | GPT_SR_ROV;
+ s->sr &= ~value;
+ imx_timerg_update(s);
+ return;
+
+ case 3: /* IR -- interrupt register */
+ s->ir = value & 0x3f;
+ imx_timerg_update(s);
+ return;
+
+ case 4: /* OCR1 -- output compare register */
+ /* In non-freerun mode, reset count when this register is written */
+ if (!(s->cr & GPT_CR_FRR)) {
+ s->waiting_rov = 0;
+ ptimer_set_limit(s->timer, value, 1);
+ } else {
+ imx_timerg_update_counts(s);
+ if (value > s->cnt) {
+ s->waiting_rov = 0;
+ imx_timerg_reload(s, value);
+ } else {
+ s->waiting_rov = 1;
+ imx_timerg_reload(s, TIMER_MAX - s->cnt);
+ }
+ }
+ s->ocr1 = value;
+ return;
+
+ case 5: /* OCR2 -- output compare register */
+ case 6: /* OCR3 -- output compare register */
+ default:
+ IPRINTF("imx_timerg_write: Bad offset %x\n",
+ (int)offset >> 2);
+ }
+}
+
+static void imx_timerg_timeout(void *opaque)
+{
+ IMXTimerGState *s = (IMXTimerGState *)opaque;
+
+ DPRINTF("imx_timerg_timeout, waiting rov=%d\n", s->waiting_rov);
+ if (s->cr & GPT_CR_FRR) {
+ /*
+ * Free running timer from 0 -> TIMERMAX
+ * Generates interrupt at TIMER_MAX and at cnt==ocr1
+ * If ocr1 == TIMER_MAX, then no need to reload timer.
+ */
+ if (s->ocr1 == TIMER_MAX) {
+ DPRINTF("s->ocr1 == TIMER_MAX, FRR\n");
+ s->sr |= GPT_SR_OF1 | GPT_SR_ROV;
+ imx_timerg_update(s);
+ return;
+ }
+
+ if (s->waiting_rov) {
+ /*
+ * We were waiting for cnt==TIMER_MAX
+ */
+ s->sr |= GPT_SR_ROV;
+ s->waiting_rov = 0;
+ s->cnt = 0;
+ imx_timerg_reload(s, s->ocr1);
+ } else {
+ /* Must have got a cnt==ocr1 timeout. */
+ s->sr |= GPT_SR_OF1;
+ s->cnt = s->ocr1;
+ s->waiting_rov = 1;
+ imx_timerg_reload(s, TIMER_MAX);
+ }
+ imx_timerg_update(s);
+ return;
+ }
+
+ s->sr |= GPT_SR_OF1;
+ imx_timerg_update(s);
+}
+
+static const MemoryRegionOps imx_timerg_ops = {
+ .read = imx_timerg_read,
+ .write = imx_timerg_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+
+static int imx_timerg_init(SysBusDevice *dev)
+{
+ IMXTimerGState *s = FROM_SYSBUS(IMXTimerGState, dev);
+ QEMUBH *bh;
+
+ sysbus_init_irq(dev, &s->irq);
+ memory_region_init_io(&s->iomem, &imx_timerg_ops,
+ s, "imxg-timer",
+ 0x00001000);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ bh = qemu_bh_new(imx_timerg_timeout, s);
+ s->timer = ptimer_init(bh);
+
+ /* Hard reset resets extra bits in CR */
+ s->cr = 0;
+ return 0;
+}
+
+void imx_timerg_create(const hwaddr addr,
+ qemu_irq irq,
+ DeviceState *ccm)
+{
+ IMXTimerGState *pp;
+ DeviceState *dev;
+
+ dev = sysbus_create_simple("imx_timerg", addr, irq);
+ pp = container_of(dev, IMXTimerGState, busdev.qdev);
+ pp->ccm = ccm;
+}
+
+static void imx_timerg_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+ k->init = imx_timerg_init;
+ dc->vmsd = &vmstate_imx_timerg;
+ dc->reset = imx_timerg_reset;
+ dc->desc = "i.MX general timer";
+}
+
+static const TypeInfo imx_timerg_info = {
+ .name = "imx_timerg",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IMXTimerGState),
+ .class_init = imx_timerg_class_init,
+};
+
+static void imx_timer_register_types(void)
+{
+ type_register_static(&imx_timerg_info);
+}
+
+type_init(imx_timer_register_types)
+++ /dev/null
-/*
- * IMX31 Timer
- *
- * Copyright (c) 2008 OK Labs
- * Copyright (c) 2011 NICTA Pty Ltd
- * Originally written by Hans Jiang
- * Updated by Peter Chubb
- *
- * This code is licensed under GPL version 2 or later. See
- * the COPYING file in the top-level directory.
- *
- */
-
-#include "hw/hw.h"
-#include "qemu/timer.h"
-#include "hw/ptimer.h"
-#include "hw/sysbus.h"
-#include "hw/arm/imx.h"
-
-//#define DEBUG_TIMER 1
-#ifdef DEBUG_TIMER
-# define DPRINTF(fmt, args...) \
- do { printf("imx_timer: " fmt , ##args); } while (0)
-#else
-# define DPRINTF(fmt, args...) do {} while (0)
-#endif
-
-/*
- * Define to 1 for messages about attempts to
- * access unimplemented registers or similar.
- */
-#define DEBUG_IMPLEMENTATION 1
-#if DEBUG_IMPLEMENTATION
-# define IPRINTF(fmt, args...) \
- do { fprintf(stderr, "imx_timer: " fmt, ##args); } while (0)
-#else
-# define IPRINTF(fmt, args...) do {} while (0)
-#endif
-
-/*
- * GPT : General purpose timer
- *
- * This timer counts up continuously while it is enabled, resetting itself
- * to 0 when it reaches TIMER_MAX (in freerun mode) or when it
- * reaches the value of ocr1 (in periodic mode). WE simulate this using a
- * QEMU ptimer counting down from ocr1 and reloading from ocr1 in
- * periodic mode, or counting from ocr1 to zero, then TIMER_MAX - ocr1.
- * waiting_rov is set when counting from TIMER_MAX.
- *
- * In the real hardware, there are three comparison registers that can
- * trigger interrupts, and compare channel 1 can be used to
- * force-reset the timer. However, this is a `bare-bones'
- * implementation: only what Linux 3.x uses has been implemented
- * (free-running timer from 0 to OCR1 or TIMER_MAX) .
- */
-
-
-#define TIMER_MAX 0XFFFFFFFFUL
-
-/* Control register. Not all of these bits have any effect (yet) */
-#define GPT_CR_EN (1 << 0) /* GPT Enable */
-#define GPT_CR_ENMOD (1 << 1) /* GPT Enable Mode */
-#define GPT_CR_DBGEN (1 << 2) /* GPT Debug mode enable */
-#define GPT_CR_WAITEN (1 << 3) /* GPT Wait Mode Enable */
-#define GPT_CR_DOZEN (1 << 4) /* GPT Doze mode enable */
-#define GPT_CR_STOPEN (1 << 5) /* GPT Stop Mode Enable */
-#define GPT_CR_CLKSRC_SHIFT (6)
-#define GPT_CR_CLKSRC_MASK (0x7)
-
-#define GPT_CR_FRR (1 << 9) /* Freerun or Restart */
-#define GPT_CR_SWR (1 << 15) /* Software Reset */
-#define GPT_CR_IM1 (3 << 16) /* Input capture channel 1 mode (2 bits) */
-#define GPT_CR_IM2 (3 << 18) /* Input capture channel 2 mode (2 bits) */
-#define GPT_CR_OM1 (7 << 20) /* Output Compare Channel 1 Mode (3 bits) */
-#define GPT_CR_OM2 (7 << 23) /* Output Compare Channel 2 Mode (3 bits) */
-#define GPT_CR_OM3 (7 << 26) /* Output Compare Channel 3 Mode (3 bits) */
-#define GPT_CR_FO1 (1 << 29) /* Force Output Compare Channel 1 */
-#define GPT_CR_FO2 (1 << 30) /* Force Output Compare Channel 2 */
-#define GPT_CR_FO3 (1 << 31) /* Force Output Compare Channel 3 */
-
-#define GPT_SR_OF1 (1 << 0)
-#define GPT_SR_ROV (1 << 5)
-
-#define GPT_IR_OF1IE (1 << 0)
-#define GPT_IR_ROVIE (1 << 5)
-
-typedef struct {
- SysBusDevice busdev;
- ptimer_state *timer;
- MemoryRegion iomem;
- DeviceState *ccm;
-
- uint32_t cr;
- uint32_t pr;
- uint32_t sr;
- uint32_t ir;
- uint32_t ocr1;
- uint32_t ocr2;
- uint32_t ocr3;
- uint32_t icr1;
- uint32_t icr2;
- uint32_t cnt;
-
- uint32_t waiting_rov;
- qemu_irq irq;
-} IMXTimerGState;
-
-static const VMStateDescription vmstate_imx_timerg = {
- .name = "imx-timerg",
- .version_id = 2,
- .minimum_version_id = 2,
- .minimum_version_id_old = 2,
- .fields = (VMStateField[]) {
- VMSTATE_UINT32(cr, IMXTimerGState),
- VMSTATE_UINT32(pr, IMXTimerGState),
- VMSTATE_UINT32(sr, IMXTimerGState),
- VMSTATE_UINT32(ir, IMXTimerGState),
- VMSTATE_UINT32(ocr1, IMXTimerGState),
- VMSTATE_UINT32(ocr2, IMXTimerGState),
- VMSTATE_UINT32(ocr3, IMXTimerGState),
- VMSTATE_UINT32(icr1, IMXTimerGState),
- VMSTATE_UINT32(icr2, IMXTimerGState),
- VMSTATE_UINT32(cnt, IMXTimerGState),
- VMSTATE_UINT32(waiting_rov, IMXTimerGState),
- VMSTATE_PTIMER(timer, IMXTimerGState),
- VMSTATE_END_OF_LIST()
- }
-};
-
-static const IMXClk imx_timerg_clocks[] = {
- NOCLK, /* 000 No clock source */
- IPG, /* 001 ipg_clk, 532MHz*/
- IPG, /* 010 ipg_clk_highfreq */
- NOCLK, /* 011 not defined */
- CLK_32k, /* 100 ipg_clk_32k */
- NOCLK, /* 101 not defined */
- NOCLK, /* 110 not defined */
- NOCLK, /* 111 not defined */
-};
-
-
-static void imx_timerg_set_freq(IMXTimerGState *s)
-{
- int clksrc;
- uint32_t freq;
-
- clksrc = (s->cr >> GPT_CR_CLKSRC_SHIFT) & GPT_CR_CLKSRC_MASK;
- freq = imx_clock_frequency(s->ccm, imx_timerg_clocks[clksrc]) / (1 + s->pr);
-
- DPRINTF("Setting gtimer clksrc %d to frequency %d\n", clksrc, freq);
- if (freq) {
- ptimer_set_freq(s->timer, freq);
- }
-}
-
-static void imx_timerg_update(IMXTimerGState *s)
-{
- uint32_t flags = s->sr & s->ir & (GPT_SR_OF1 | GPT_SR_ROV);
-
- DPRINTF("g-timer SR: %s %s IR=%s %s, %s\n",
- s->sr & GPT_SR_OF1 ? "OF1" : "",
- s->sr & GPT_SR_ROV ? "ROV" : "",
- s->ir & GPT_SR_OF1 ? "OF1" : "",
- s->ir & GPT_SR_ROV ? "ROV" : "",
- s->cr & GPT_CR_EN ? "CR_EN" : "Not Enabled");
-
- qemu_set_irq(s->irq, (s->cr & GPT_CR_EN) && flags);
-}
-
-static uint32_t imx_timerg_update_counts(IMXTimerGState *s)
-{
- uint64_t target = s->waiting_rov ? TIMER_MAX : s->ocr1;
- uint64_t cnt = ptimer_get_count(s->timer);
- s->cnt = target - cnt;
- return s->cnt;
-}
-
-static void imx_timerg_reload(IMXTimerGState *s, uint32_t timeout)
-{
- uint64_t diff_cnt;
-
- if (!(s->cr & GPT_CR_FRR)) {
- IPRINTF("IMX_timerg_reload --- called in reset-mode\n");
- return;
- }
-
- /*
- * For small timeouts, qemu sometimes runs too slow.
- * Better deliver a late interrupt than none.
- *
- * In Reset mode (FRR bit clear)
- * the ptimer reloads itself from OCR1;
- * in free-running mode we need to fake
- * running from 0 to ocr1 to TIMER_MAX
- */
- if (timeout > s->cnt) {
- diff_cnt = timeout - s->cnt;
- } else {
- diff_cnt = 0;
- }
- ptimer_set_count(s->timer, diff_cnt);
-}
-
-static uint64_t imx_timerg_read(void *opaque, hwaddr offset,
- unsigned size)
-{
- IMXTimerGState *s = (IMXTimerGState *)opaque;
-
- DPRINTF("g-read(offset=%x)", offset >> 2);
- switch (offset >> 2) {
- case 0: /* Control Register */
- DPRINTF(" cr = %x\n", s->cr);
- return s->cr;
-
- case 1: /* prescaler */
- DPRINTF(" pr = %x\n", s->pr);
- return s->pr;
-
- case 2: /* Status Register */
- DPRINTF(" sr = %x\n", s->sr);
- return s->sr;
-
- case 3: /* Interrupt Register */
- DPRINTF(" ir = %x\n", s->ir);
- return s->ir;
-
- case 4: /* Output Compare Register 1 */
- DPRINTF(" ocr1 = %x\n", s->ocr1);
- return s->ocr1;
-
- case 5: /* Output Compare Register 2 */
- DPRINTF(" ocr2 = %x\n", s->ocr2);
- return s->ocr2;
-
- case 6: /* Output Compare Register 3 */
- DPRINTF(" ocr3 = %x\n", s->ocr3);
- return s->ocr3;
-
- case 7: /* input Capture Register 1 */
- DPRINTF(" icr1 = %x\n", s->icr1);
- return s->icr1;
-
- case 8: /* input Capture Register 2 */
- DPRINTF(" icr2 = %x\n", s->icr2);
- return s->icr2;
-
- case 9: /* cnt */
- imx_timerg_update_counts(s);
- DPRINTF(" cnt = %x\n", s->cnt);
- return s->cnt;
- }
-
- IPRINTF("imx_timerg_read: Bad offset %x\n",
- (int)offset >> 2);
-
- return 0;
-}
-
-static void imx_timerg_reset(DeviceState *dev)
-{
- IMXTimerGState *s = container_of(dev, IMXTimerGState, busdev.qdev);
-
- /*
- * Soft reset doesn't touch some bits; hard reset clears them
- */
- s->cr &= ~(GPT_CR_EN|GPT_CR_ENMOD|GPT_CR_STOPEN|GPT_CR_DOZEN|
- GPT_CR_WAITEN|GPT_CR_DBGEN);
- s->sr = 0;
- s->pr = 0;
- s->ir = 0;
- s->cnt = 0;
- s->ocr1 = TIMER_MAX;
- s->ocr2 = TIMER_MAX;
- s->ocr3 = TIMER_MAX;
- s->icr1 = 0;
- s->icr2 = 0;
- ptimer_stop(s->timer);
- ptimer_set_limit(s->timer, TIMER_MAX, 1);
- ptimer_set_count(s->timer, TIMER_MAX);
- imx_timerg_set_freq(s);
-}
-
-static void imx_timerg_write(void *opaque, hwaddr offset,
- uint64_t value, unsigned size)
-{
- IMXTimerGState *s = (IMXTimerGState *)opaque;
- DPRINTF("g-write(offset=%x, value = 0x%x)\n", (unsigned int)offset >> 2,
- (unsigned int)value);
-
- switch (offset >> 2) {
- case 0: {
- uint32_t oldcr = s->cr;
- /* CR */
- if (value & GPT_CR_SWR) { /* force reset */
- value &= ~GPT_CR_SWR;
- imx_timerg_reset(&s->busdev.qdev);
- imx_timerg_update(s);
- }
-
- s->cr = value & ~0x7c00;
- imx_timerg_set_freq(s);
- if ((oldcr ^ value) & GPT_CR_EN) {
- if (value & GPT_CR_EN) {
- if (value & GPT_CR_ENMOD) {
- ptimer_set_count(s->timer, s->ocr1);
- s->cnt = 0;
- }
- ptimer_run(s->timer,
- (value & GPT_CR_FRR) && (s->ocr1 != TIMER_MAX));
- } else {
- ptimer_stop(s->timer);
- };
- }
- return;
- }
-
- case 1: /* Prescaler */
- s->pr = value & 0xfff;
- imx_timerg_set_freq(s);
- return;
-
- case 2: /* SR */
- /*
- * No point in implementing the status register bits to do with
- * external interrupt sources.
- */
- value &= GPT_SR_OF1 | GPT_SR_ROV;
- s->sr &= ~value;
- imx_timerg_update(s);
- return;
-
- case 3: /* IR -- interrupt register */
- s->ir = value & 0x3f;
- imx_timerg_update(s);
- return;
-
- case 4: /* OCR1 -- output compare register */
- /* In non-freerun mode, reset count when this register is written */
- if (!(s->cr & GPT_CR_FRR)) {
- s->waiting_rov = 0;
- ptimer_set_limit(s->timer, value, 1);
- } else {
- imx_timerg_update_counts(s);
- if (value > s->cnt) {
- s->waiting_rov = 0;
- imx_timerg_reload(s, value);
- } else {
- s->waiting_rov = 1;
- imx_timerg_reload(s, TIMER_MAX - s->cnt);
- }
- }
- s->ocr1 = value;
- return;
-
- case 5: /* OCR2 -- output compare register */
- case 6: /* OCR3 -- output compare register */
- default:
- IPRINTF("imx_timerg_write: Bad offset %x\n",
- (int)offset >> 2);
- }
-}
-
-static void imx_timerg_timeout(void *opaque)
-{
- IMXTimerGState *s = (IMXTimerGState *)opaque;
-
- DPRINTF("imx_timerg_timeout, waiting rov=%d\n", s->waiting_rov);
- if (s->cr & GPT_CR_FRR) {
- /*
- * Free running timer from 0 -> TIMERMAX
- * Generates interrupt at TIMER_MAX and at cnt==ocr1
- * If ocr1 == TIMER_MAX, then no need to reload timer.
- */
- if (s->ocr1 == TIMER_MAX) {
- DPRINTF("s->ocr1 == TIMER_MAX, FRR\n");
- s->sr |= GPT_SR_OF1 | GPT_SR_ROV;
- imx_timerg_update(s);
- return;
- }
-
- if (s->waiting_rov) {
- /*
- * We were waiting for cnt==TIMER_MAX
- */
- s->sr |= GPT_SR_ROV;
- s->waiting_rov = 0;
- s->cnt = 0;
- imx_timerg_reload(s, s->ocr1);
- } else {
- /* Must have got a cnt==ocr1 timeout. */
- s->sr |= GPT_SR_OF1;
- s->cnt = s->ocr1;
- s->waiting_rov = 1;
- imx_timerg_reload(s, TIMER_MAX);
- }
- imx_timerg_update(s);
- return;
- }
-
- s->sr |= GPT_SR_OF1;
- imx_timerg_update(s);
-}
-
-static const MemoryRegionOps imx_timerg_ops = {
- .read = imx_timerg_read,
- .write = imx_timerg_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-
-static int imx_timerg_init(SysBusDevice *dev)
-{
- IMXTimerGState *s = FROM_SYSBUS(IMXTimerGState, dev);
- QEMUBH *bh;
-
- sysbus_init_irq(dev, &s->irq);
- memory_region_init_io(&s->iomem, &imx_timerg_ops,
- s, "imxg-timer",
- 0x00001000);
- sysbus_init_mmio(dev, &s->iomem);
-
- bh = qemu_bh_new(imx_timerg_timeout, s);
- s->timer = ptimer_init(bh);
-
- /* Hard reset resets extra bits in CR */
- s->cr = 0;
- return 0;
-}
-
-
-
-/*
- * EPIT: Enhanced periodic interrupt timer
- */
-
-#define CR_EN (1 << 0)
-#define CR_ENMOD (1 << 1)
-#define CR_OCIEN (1 << 2)
-#define CR_RLD (1 << 3)
-#define CR_PRESCALE_SHIFT (4)
-#define CR_PRESCALE_MASK (0xfff)
-#define CR_SWR (1 << 16)
-#define CR_IOVW (1 << 17)
-#define CR_DBGEN (1 << 18)
-#define CR_WAITEN (1 << 19)
-#define CR_DOZEN (1 << 20)
-#define CR_STOPEN (1 << 21)
-#define CR_CLKSRC_SHIFT (24)
-#define CR_CLKSRC_MASK (0x3 << CR_CLKSRC_SHIFT)
-
-
-/*
- * Exact clock frequencies vary from board to board.
- * These are typical.
- */
-static const IMXClk imx_timerp_clocks[] = {
- 0, /* 00 disabled */
- IPG, /* 01 ipg_clk, ~532MHz */
- IPG, /* 10 ipg_clk_highfreq */
- CLK_32k, /* 11 ipg_clk_32k -- ~32kHz */
-};
-
-typedef struct {
- SysBusDevice busdev;
- ptimer_state *timer_reload;
- ptimer_state *timer_cmp;
- MemoryRegion iomem;
- DeviceState *ccm;
-
- uint32_t cr;
- uint32_t sr;
- uint32_t lr;
- uint32_t cmp;
- uint32_t cnt;
-
- uint32_t freq;
- qemu_irq irq;
-} IMXTimerPState;
-
-/*
- * Update interrupt status
- */
-static void imx_timerp_update(IMXTimerPState *s)
-{
- if (s->sr && (s->cr & CR_OCIEN)) {
- qemu_irq_raise(s->irq);
- } else {
- qemu_irq_lower(s->irq);
- }
-}
-
-static void set_timerp_freq(IMXTimerPState *s)
-{
- int clksrc;
- unsigned prescaler;
- uint32_t freq;
-
- clksrc = (s->cr & CR_CLKSRC_MASK) >> CR_CLKSRC_SHIFT;
- prescaler = 1 + ((s->cr >> CR_PRESCALE_SHIFT) & CR_PRESCALE_MASK);
- freq = imx_clock_frequency(s->ccm, imx_timerp_clocks[clksrc]) / prescaler;
-
- s->freq = freq;
- DPRINTF("Setting ptimer frequency to %u\n", freq);
-
- if (freq) {
- ptimer_set_freq(s->timer_reload, freq);
- ptimer_set_freq(s->timer_cmp, freq);
- }
-}
-
-static void imx_timerp_reset(DeviceState *dev)
-{
- IMXTimerPState *s = container_of(dev, IMXTimerPState, busdev.qdev);
-
- /*
- * Soft reset doesn't touch some bits; hard reset clears them
- */
- s->cr &= ~(CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN);
- s->sr = 0;
- s->lr = TIMER_MAX;
- s->cmp = 0;
- s->cnt = 0;
- /* stop both timers */
- ptimer_stop(s->timer_cmp);
- ptimer_stop(s->timer_reload);
- /* compute new frequency */
- set_timerp_freq(s);
- /* init both timers to TIMER_MAX */
- ptimer_set_limit(s->timer_cmp, TIMER_MAX, 1);
- ptimer_set_limit(s->timer_reload, TIMER_MAX, 1);
- if (s->freq && (s->cr & CR_EN)) {
- /* if the timer is still enabled, restart it */
- ptimer_run(s->timer_reload, 1);
- }
-}
-
-static uint32_t imx_timerp_update_counts(IMXTimerPState *s)
-{
- s->cnt = ptimer_get_count(s->timer_reload);
-
- return s->cnt;
-}
-
-static uint64_t imx_timerp_read(void *opaque, hwaddr offset,
- unsigned size)
-{
- IMXTimerPState *s = (IMXTimerPState *)opaque;
-
- DPRINTF("p-read(offset=%x)", offset >> 2);
- switch (offset >> 2) {
- case 0: /* Control Register */
- DPRINTF("cr %x\n", s->cr);
- return s->cr;
-
- case 1: /* Status Register */
- DPRINTF("sr %x\n", s->sr);
- return s->sr;
-
- case 2: /* LR - ticks*/
- DPRINTF("lr %x\n", s->lr);
- return s->lr;
-
- case 3: /* CMP */
- DPRINTF("cmp %x\n", s->cmp);
- return s->cmp;
-
- case 4: /* CNT */
- imx_timerp_update_counts(s);
- DPRINTF(" cnt = %x\n", s->cnt);
- return s->cnt;
- }
-
- IPRINTF("imx_timerp_read: Bad offset %x\n",
- (int)offset >> 2);
- return 0;
-}
-
-static void imx_reload_compare_timer(IMXTimerPState *s)
-{
- if ((s->cr & CR_OCIEN) && s->cmp) {
- /* if the compare feature is on */
- uint32_t tmp = imx_timerp_update_counts(s);
- if (tmp > s->cmp) {
- /* reinit the cmp timer if required */
- ptimer_set_count(s->timer_cmp, tmp - s->cmp);
- if ((s->cr & CR_EN)) {
- /* Restart the cmp timer if required */
- ptimer_run(s->timer_cmp, 0);
- }
- }
- }
-}
-
-static void imx_timerp_write(void *opaque, hwaddr offset,
- uint64_t value, unsigned size)
-{
- IMXTimerPState *s = (IMXTimerPState *)opaque;
- DPRINTF("p-write(offset=%x, value = %x)\n", (unsigned int)offset >> 2,
- (unsigned int)value);
-
- switch (offset >> 2) {
- case 0: /* CR */
- s->cr = value & 0x03ffffff;
- if (s->cr & CR_SWR) {
- /* handle the reset */
- imx_timerp_reset(&s->busdev.qdev);
- } else {
- set_timerp_freq(s);
- }
-
- if (s->freq && (s->cr & CR_EN)) {
- if (s->cr & CR_ENMOD) {
- if (s->cr & CR_RLD) {
- ptimer_set_limit(s->timer_reload, s->lr, 1);
- } else {
- ptimer_set_limit(s->timer_reload, TIMER_MAX, 1);
- }
- }
-
- imx_reload_compare_timer(s);
-
- ptimer_run(s->timer_reload, 1);
- } else {
- /* stop both timers */
- ptimer_stop(s->timer_reload);
- ptimer_stop(s->timer_cmp);
- }
- break;
-
- case 1: /* SR - ACK*/
- /* writing 1 to OCIF clear the OCIF bit */
- if (value & 0x01) {
- s->sr = 0;
- imx_timerp_update(s);
- }
- break;
-
- case 2: /* LR - set ticks */
- s->lr = value;
-
- if (s->cr & CR_RLD) {
- /* Also set the limit if the LRD bit is set */
- /* If IOVW bit is set then set the timer value */
- ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW);
- } else if (s->cr & CR_IOVW) {
- /* If IOVW bit is set then set the timer value */
- ptimer_set_count(s->timer_reload, s->lr);
- }
-
- imx_reload_compare_timer(s);
-
- break;
-
- case 3: /* CMP */
- s->cmp = value;
-
- imx_reload_compare_timer(s);
-
- break;
-
- default:
- IPRINTF("imx_timerp_write: Bad offset %x\n",
- (int)offset >> 2);
- }
-}
-
-static void imx_timerp_reload(void *opaque)
-{
- IMXTimerPState *s = (IMXTimerPState *)opaque;
-
- DPRINTF("imxp reload\n");
-
- if (!(s->cr & CR_EN)) {
- return;
- }
-
- if (s->cr & CR_RLD) {
- ptimer_set_limit(s->timer_reload, s->lr, 1);
- } else {
- ptimer_set_limit(s->timer_reload, TIMER_MAX, 1);
- }
-
- if (s->cr & CR_OCIEN) {
- /* if compare register is 0 then we handle the interrupt here */
- if (s->cmp == 0) {
- s->sr = 1;
- imx_timerp_update(s);
- } else if (s->cmp <= s->lr) {
- /* We should launch the compare register */
- ptimer_set_count(s->timer_cmp, s->lr - s->cmp);
- ptimer_run(s->timer_cmp, 0);
- } else {
- IPRINTF("imxp reload: s->lr < s->cmp\n");
- }
- }
-}
-
-static void imx_timerp_cmp(void *opaque)
-{
- IMXTimerPState *s = (IMXTimerPState *)opaque;
-
- DPRINTF("imxp compare\n");
-
- ptimer_stop(s->timer_cmp);
-
- /* compare register is not 0 */
- if (s->cmp) {
- s->sr = 1;
- imx_timerp_update(s);
- }
-}
-
-void imx_timerp_create(const hwaddr addr,
- qemu_irq irq,
- DeviceState *ccm)
-{
- IMXTimerPState *pp;
- DeviceState *dev;
-
- dev = sysbus_create_simple("imx_timerp", addr, irq);
- pp = container_of(dev, IMXTimerPState, busdev.qdev);
- pp->ccm = ccm;
-}
-
-static const MemoryRegionOps imx_timerp_ops = {
- .read = imx_timerp_read,
- .write = imx_timerp_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static const VMStateDescription vmstate_imx_timerp = {
- .name = "imx-timerp",
- .version_id = 2,
- .minimum_version_id = 2,
- .minimum_version_id_old = 2,
- .fields = (VMStateField[]) {
- VMSTATE_UINT32(cr, IMXTimerPState),
- VMSTATE_UINT32(sr, IMXTimerPState),
- VMSTATE_UINT32(lr, IMXTimerPState),
- VMSTATE_UINT32(cmp, IMXTimerPState),
- VMSTATE_UINT32(cnt, IMXTimerPState),
- VMSTATE_UINT32(freq, IMXTimerPState),
- VMSTATE_PTIMER(timer_reload, IMXTimerPState),
- VMSTATE_PTIMER(timer_cmp, IMXTimerPState),
- VMSTATE_END_OF_LIST()
- }
-};
-
-static int imx_timerp_init(SysBusDevice *dev)
-{
- IMXTimerPState *s = FROM_SYSBUS(IMXTimerPState, dev);
- QEMUBH *bh;
-
- DPRINTF("imx_timerp_init\n");
- sysbus_init_irq(dev, &s->irq);
- memory_region_init_io(&s->iomem, &imx_timerp_ops,
- s, "imxp-timer",
- 0x00001000);
- sysbus_init_mmio(dev, &s->iomem);
-
- bh = qemu_bh_new(imx_timerp_reload, s);
- s->timer_reload = ptimer_init(bh);
-
- bh = qemu_bh_new(imx_timerp_cmp, s);
- s->timer_cmp = ptimer_init(bh);
-
- return 0;
-}
-
-
-void imx_timerg_create(const hwaddr addr,
- qemu_irq irq,
- DeviceState *ccm)
-{
- IMXTimerGState *pp;
- DeviceState *dev;
-
- dev = sysbus_create_simple("imx_timerg", addr, irq);
- pp = container_of(dev, IMXTimerGState, busdev.qdev);
- pp->ccm = ccm;
-}
-
-static void imx_timerg_class_init(ObjectClass *klass, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(klass);
- SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
- k->init = imx_timerg_init;
- dc->vmsd = &vmstate_imx_timerg;
- dc->reset = imx_timerg_reset;
- dc->desc = "i.MX general timer";
-}
-
-static void imx_timerp_class_init(ObjectClass *klass, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(klass);
- SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
- k->init = imx_timerp_init;
- dc->vmsd = &vmstate_imx_timerp;
- dc->reset = imx_timerp_reset;
- dc->desc = "i.MX periodic timer";
-}
-
-static const TypeInfo imx_timerp_info = {
- .name = "imx_timerp",
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(IMXTimerPState),
- .class_init = imx_timerp_class_init,
-};
-
-static const TypeInfo imx_timerg_info = {
- .name = "imx_timerg",
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(IMXTimerGState),
- .class_init = imx_timerg_class_init,
-};
-
-static void imx_timer_register_types(void)
-{
- type_register_static(&imx_timerp_info);
- type_register_static(&imx_timerg_info);
-}
-
-type_init(imx_timer_register_types)
projects / qemu.git / commitdiff