Leon Romanovsky [Tue, 11 May 2021 05:48:31 +0000 (08:48 +0300)]
RDMA/rxe: Return CQE error if invalid lkey was supplied
RXE is missing update of WQE status in LOCAL_WRITE failures. This caused
the following kernel panic if someone sent an atomic operation with an
explicitly wrong lkey.
Maor Gottlieb [Tue, 11 May 2021 05:48:29 +0000 (08:48 +0300)]
RDMA/mlx5: Recover from fatal event in dual port mode
When there is fatal event on the slave port, the device is marked as not
active. We need to mark it as active again when the slave is recovered to
regain full functionality.
Kevin Hilman [Tue, 11 May 2021 19:00:54 +0000 (12:00 -0700)]
MAINTAINERS: ARM/Amlogic SoCs: add Neil as primary maintainer
Add Neil as primary maintainer for the Amlogic family of Arm SoCs. I
will now act as co-maintainer.
Neil is already doing lots of the reviewing, testing and behind the
scenes support for users of the upstream kernel on these SoCs, so this
is just to formalize the current state of affairs.
Thanks Neil for all of your efforts, and keep up the great work!
We can get -EIO or any number of legitimate errors from
btrfs_search_slot(), panicing here is not the appropriate response. The
error path for this code handles errors properly, simply return the
error.
Filipe Manana [Fri, 14 May 2021 09:03:40 +0000 (10:03 +0100)]
btrfs: release path before starting transaction when cloning inline extent
When cloning an inline extent there are a few cases, such as when we have
an implicit hole at file offset 0, where we start a transaction while
holding a read lock on a leaf. Starting the transaction results in a call
to sb_start_intwrite(), which results in doing a read lock on a percpu
semaphore. Lockdep doesn't like this and complains about it:
This should be a false positive, as both locks are acquired in read mode.
Nevertheless, we don't need to hold a leaf locked when we start the
transaction, so just release the leaf (path) before starting it.
Pavel Begunkov [Mon, 17 May 2021 11:43:34 +0000 (12:43 +0100)]
io_uring: don't modify req->poll for rw
__io_queue_proc() is used by both poll and apoll, so we should not
access req->poll directly but selecting right struct io_poll_iocb
depending on use case.
Jan Kara [Mon, 17 May 2021 12:39:56 +0000 (14:39 +0200)]
quota: Disable quotactl_path syscall
In commit fa8b90070a80 ("quota: wire up quotactl_path") we have wired up
new quotactl_path syscall. However some people in LWN discussion have
objected that the path based syscall is missing dirfd and flags argument
which is mostly standard for contemporary path based syscalls. Indeed
they have a point and after a discussion with Christian Brauner and
Sascha Hauer I've decided to disable the syscall for now and update its
API. Since there is no userspace currently using that syscall and it
hasn't been released in any major release, we should be fine.
Zhen Lei [Tue, 11 May 2021 11:27:33 +0000 (19:27 +0800)]
drm/exynos/decon5433: Remove redundant error printing in exynos5433_decon_probe()
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Zhen Lei [Tue, 11 May 2021 09:40:04 +0000 (17:40 +0800)]
drm/exynos: Remove redundant error printing in exynos_dsi_probe()
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Correct the kerneldoc of fimd_shadow_protect_win() to fix W=1 warnings:
drivers/gpu/drm/exynos/exynos_drm_fimd.c:734: warning:
expecting prototype for shadow_protect_win(). Prototype was for fimd_shadow_protect_win() instead
Zhenyu Wang [Thu, 13 May 2021 08:39:02 +0000 (16:39 +0800)]
drm/i915/gvt: Move mdev attribute groups into kvmgt module
As kvmgt module contains all handling for VFIO/mdev, leaving mdev attribute
groups in gvt module caused dependency issue. Although it was there for possible
other hypervisor usage, that turns out never to be true. So this moves all mdev
handling into kvmgt module completely to resolve dependency issue.
With this fix, no config workaround is required. So revert previous workaround
commits: adaeb718d46f ("vfio/gvt: fix DRM_I915_GVT dependency on VFIO_MDEV")
and 07e543f4f9d1 ("vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV").
Jessica Yu [Wed, 12 May 2021 13:45:46 +0000 (15:45 +0200)]
module: check for exit sections in layout_sections() instead of module_init_section()
Previously, when CONFIG_MODULE_UNLOAD=n, the module loader just does not
attempt to load exit sections since it never expects that any code in those
sections will ever execute. However, dynamic code patching (alternatives,
jump_label and static_call) can have sites in __exit code, even if __exit is
never executed. Therefore __exit must be present at runtime, at least for as
long as __init code is.
Commit 33121347fb1c ("module: treat exit sections the same as init
sections when !CONFIG_MODULE_UNLOAD") solves the requirements of
jump_labels and static_calls by putting the exit sections in the init
region of the module so that they are at least present at init, and
discarded afterwards. It does this by including a check for exit
sections in module_init_section(), so that it also returns true for exit
sections, and the module loader will automatically sort them in the init
region of the module.
However, the solution there was not completely arch-independent. ARM is
a special case where it supplies its own module_{init, exit}_section()
functions. Instead of pushing the exit section checks into
module_init_section(), just implement the exit section check in
layout_sections(), so that we don't have to touch arch-dependent code.
Fixes: 33121347fb1c ("module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD") Reviewed-by: Russell King (Oracle) <[email protected]> Signed-off-by: Jessica Yu <[email protected]>
wenhuizhang [Thu, 13 May 2021 16:55:16 +0000 (12:55 -0400)]
cifs: remove deadstore in cifs_close_all_deferred_files()
Deadstore detected by Lukas Bulwahn's CodeChecker Tool (ELISA group).
line 741 struct cifsInodeInfo *cinode;
line 747 cinode = CIFS_I(d_inode(cfile->dentry));
could be deleted.
cinode on filesystem should not be deleted when files are closed,
they are representations of some data fields on a physical disk,
thus no further action is required.
The virtual inode on vfs will be handled by vfs automatically,
and the denotation is inode, which is different from the cinode.
Michal Kubecek [Sat, 15 May 2021 10:11:13 +0000 (12:11 +0200)]
kbuild: dummy-tools: adjust to stricter stackprotector check
Commit 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular
percpu variable") modified the stackprotector check on 32-bit x86 to check
if gcc supports using %fs as canary. Adjust dummy-tools gcc script to pass
this new test by returning "%fs" rather than "%gs" if it detects
-mstack-protector-guard-reg=fs on command line.
Fixes: 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular percpu variable") Signed-off-by: Michal Kubecek <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
Darrick J. Wong [Sun, 9 May 2021 23:22:54 +0000 (16:22 -0700)]
xfs: adjust rt allocation minlen when extszhint > rtextsize
xfs_bmap_rtalloc doesn't handle realtime extent files with extent size
hints larger than the rt volume's extent size properly, because
xfs_bmap_extsize_align can adjust the offset/length parameters to try to
fit the extent size hint.
Under these conditions, minlen has to be large enough so that any
allocation returned by xfs_rtallocate_extent will be large enough to
cover at least one of the blocks that the caller asked for. If the
allocation is too short, bmapi_write will return no mapping for the
requested range, which causes ENOSPC errors in other parts of the
filesystem.
Therefore, adjust minlen upwards to fix this. This can be found by
running generic/263 (g/127 or g/522) with a realtime extent size hint
that's larger than the rt volume extent size.
Linus Torvalds [Sun, 16 May 2021 17:13:14 +0000 (10:13 -0700)]
Merge tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for driver core changes that happened in
5.13-rc1.
The clk driver fix resolves a many-reported issue with booting some
devices, and the USB typec fix resolves the reported problem of USB
systems on some embedded boards.
Both of these have been in linux-next this week with no reported
issues"
* tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
clk: Skip clk provider registration when np is NULL
usb: typec: tcpm: Don't block probing of consumers of "connector" nodes
Linus Torvalds [Sun, 16 May 2021 16:55:05 +0000 (09:55 -0700)]
Merge tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.13-rc2. They consist of a number
of resolutions for reported issues:
- typec fixes for found problems
- xhci fixes and quirk additions
- dwc3 driver fixes
- minor fixes found by Coverity
- cdc-wdm fixes for reported problems
All of these have been in linux-next for a few days with no reported
issues"
* tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
usb: core: hub: fix race condition about TRSMRCY of resume
usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default
xhci: Add reset resume quirk for AMD xhci controller.
usb: xhci: Increase timeout for HC halt
xhci: Do not use GFP_KERNEL in (potentially) atomic context
xhci: Fix giving back cancelled URBs even if halted endpoint can't reset
xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
usb: musb: Fix an error message
usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS
usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work
usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
usb: fotg210-hcd: Fix an error message
docs: usb: function: Modify path name
usb: dwc3: omap: improve extcon initialization
usb: typec: ucsi: Put fwnode in any case during ->probe()
usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP
usb: dwc2: Remove obsolete MODULE_ constants from platform.c
usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()
usb: dwc3: imx8mp: detect dwc3 core node via compatible string
usb: dwc3: gadget: Return success always for kick transfer in ep queue
...
Linus Torvalds [Sun, 16 May 2021 16:42:13 +0000 (09:42 -0700)]
Merge tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for timers:
- Use the ALARM feature check in the alarmtimer core code insted of
the old method of checking for the set_alarm() callback.
Drivers can have that callback set but the feature bit cleared. If
such a RTC device is selected then alarms wont work.
- Use a proper define to let the preprocessor check whether Hyper-V
VDSO clocksource should be active.
The code used a constant in an enum with #ifdef, which evaluates to
always false and disabled the clocksource for VDSO"
* tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
alarmtimer: Check RTC features instead of ops
Linus Torvalds [Sun, 16 May 2021 16:39:04 +0000 (09:39 -0700)]
Merge tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two patches for error path fixes
- a small series for fixing a regression with swiotlb with Xen on Arm
* tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/swiotlb: check if the swiotlb has already been initialized
arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required
xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.h
xen/unpopulated-alloc: fix error return code in fill_list()
xen/gntdev: fix gntdev_mmap() error exit path
Linus Torvalds [Sun, 16 May 2021 16:31:06 +0000 (09:31 -0700)]
Merge tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The three SEV commits are not really urgent material. But we figured
since getting them in now will avoid a huge amount of conflicts
between future SEV changes touching tip, the kvm and probably other
trees, sending them to you now would be best.
The idea is that the tip, kvm etc branches for 5.14 will all base
ontop of -rc2 and thus everything will be peachy. What is more, those
changes are purely mechanical and defines movement so they should be
fine to go now (famous last words).
Summary:
- Enable -Wundef for the compressed kernel build stage
- Reorganize SEV code to streamline and simplify future development"
* tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Enable -Wundef
x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG
x86/sev: Move GHCB MSR protocol and NAE definitions in a common header
x86/sev-es: Rename sev-es.{ch} to sev.{ch}
Takashi Iwai [Sun, 16 May 2021 16:17:55 +0000 (18:17 +0200)]
ALSA: intel8x0: Don't update period unless prepared
The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever
the hardware sets the corresponding status bit for each stream. This
works fine for most cases as long as the hardware behaves properly.
But when the hardware gives a wrong bit set, this leads to a zero-
division Oops, and reportedly, this seems what happened on a VM.
For fixing the crash, this patch adds a internal flag indicating that
the stream is ready to be updated, and check it (as well as the flag
being in suspended) to ignore such spurious update.
Zhen Lei [Tue, 11 May 2021 12:54:28 +0000 (20:54 +0800)]
irqchip: Remove redundant error printing
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Ajish Koshy [Wed, 5 May 2021 12:01:03 +0000 (17:31 +0530)]
scsi: pm80xx: Fix drives missing during rmmod/insmod loop
When driver is loaded after rmmod some drives are not showing up during
discovery.
SATA drives are directly attached to the controller connected phys. During
device discovery, the IDENTIFY command (qc timeout (cmd 0xec)) is timing out
during revalidation. This will trigger abort from host side and controller
successfully aborts the command and returns success. Post this successful
abort response ATA library decides to mark the disk as NODEV.
To overcome this, inside pm8001_scan_start() after phy_start() call, add get
start response and wait for few milliseconds to trigger next phy start.
This millisecond delay will give sufficient time for the controller state
machine to accept next phy start.
Linus Torvalds [Sat, 15 May 2021 17:24:48 +0000 (10:24 -0700)]
Merge tag 'sched-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix an idle CPU selection bug, and an AMD Ryzen maximum frequency
enumeration bug"
* tag 'sched-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations
sched/fair: Fix clearing of has_idle_cores flag in select_idle_cpu()
Linus Torvalds [Sat, 15 May 2021 16:42:27 +0000 (09:42 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: resource, squashfs, hfsplus,
modprobe, and mm (hugetlb, slub, userfaultfd, ksm, pagealloc, kasan,
pagemap, and ioremap)"
* emailed patches from Andrew Morton <[email protected]>:
mm/ioremap: fix iomap_max_page_shift
docs: admin-guide: update description for kernel.modprobe sysctl
hfsplus: prevent corruption in shrinking truncate
mm/filemap: fix readahead return types
kasan: fix unit tests with CONFIG_UBSAN_LOCAL_BOUNDS enabled
mm: fix struct page layout on 32-bit systems
ksm: revert "use GET_KSM_PAGE_NOLOCK to get ksm page in remove_rmap_item_from_tree()"
userfaultfd: release page in error path to avoid BUG_ON
squashfs: fix divide error in calculate_skip()
kernel/resource: fix return code check in __request_free_mem_region
mm, slub: move slub_debug static key enabling outside slab_mutex
mm/hugetlb: fix cow where page writtable in child
mm/hugetlb: fix F_SEAL_FUTURE_WRITE
Linus Torvalds [Sat, 15 May 2021 16:01:45 +0000 (09:01 -0700)]
Merge tag 'arc-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- PAE fixes
- syscall num check off-by-one bug
- misc fixes
* tag 'arc-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: mm: Use max_high_pfn as a HIGHMEM zone border
ARC: mm: PAE: use 40-bit physical page mask
ARC: entry: fix off-by-one error in syscall number validation
ARC: kgdb: add 'fallthrough' to prevent a warning
arc: Fix typos/spellos
Linus Torvalds [Sat, 15 May 2021 15:52:30 +0000 (08:52 -0700)]
Merge tag 'block-5.13-2021-05-14' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix for shared tag set exit (Bart)
- Correct ioctl range for zoned ioctls (Damien)
- Removed dead/unused function (Lin)
- Fix perf regression for shared tags (Ming)
- Fix out-of-bounds issue with kyber and preemption (Omar)
- BFQ merge fix (Paolo)
- Two error handling fixes for nbd (Sun)
- Fix weight update in blk-iocost (Tejun)
- NVMe pull request (Christoph):
- correct the check for using the inline bio in nvmet (Chaitanya
Kulkarni)
- demote unsupported command warnings (Chaitanya Kulkarni)
- fix corruption due to double initializing ANA state (me, Hou Pu)
- reset ns->file when open fails (Daniel Wagner)
- fix a NULL deref when SEND is completed with error in nvmet-rdma
(Michal Kalderon)
- Fix kernel-doc warning (Bart)
* tag 'block-5.13-2021-05-14' of git://git.kernel.dk/linux-block:
block/partitions/efi.c: Fix the efi_partition() kernel-doc header
blk-mq: Swap two calls in blk_mq_exit_queue()
blk-mq: plug request for shared sbitmap
nvmet: use new ana_log_size instead the old one
nvmet: seset ns->file when open fails
nbd: share nbd_put and return by goto put_nbd
nbd: Fix NULL pointer in flush_workqueue
blkdev.h: remove unused codes blk_account_rq
block, bfq: avoid circular stable merges
blk-iocost: fix weight updates of inner active iocgs
nvmet: demote fabrics cmd parse err msg to debug
nvmet: use helper to remove the duplicate code
nvmet: demote discovery cmd parse err msg to debug
nvmet-rdma: Fix NULL deref when SEND is completed with error
nvmet: fix inline bio check for passthru
nvmet: fix inline bio check for bdev-ns
nvme-multipath: fix double initialization of ANA state
kyber: fix out of bounds access when preempted
block: uapi: fix comment about block device ioctl
Linus Torvalds [Sat, 15 May 2021 15:43:44 +0000 (08:43 -0700)]
Merge tag 'io_uring-5.13-2021-05-14' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Just a few minor fixes/changes:
- Fix issue with double free race for linked timeout completions
- Fix reference issue with timeouts
- Remove last few places that make SQPOLL special, since it's just an
io thread now.
- Bump maximum allowed registered buffers, as we don't allocate as
much anymore"
* tag 'io_uring-5.13-2021-05-14' of git://git.kernel.dk/linux-block:
io_uring: increase max number of reg buffers
io_uring: further remove sqpoll limits on opcodes
io_uring: fix ltout double free on completion race
io_uring: fix link timeout refs
Linus Torvalds [Sat, 15 May 2021 15:37:21 +0000 (08:37 -0700)]
Merge tag 'erofs-for-5.13-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"This mainly fixes 1 lcluster-sized pclusters for the big pcluster
feature, which can be forcely generated by mkfs as a specific on-disk
case for per-(sub)file compression strategies but missed to handle in
runtime properly.
Also, documentation updates are included to fix the broken
illustration due to the ReST conversion by accident and complete the
big pcluster introduction.
Summary:
- update documentation to fix the broken illustration due to ReST
conversion by accident at that time and complete the big pcluster
introduction
- fix 1 lcluster-sized pclusters for the big pcluster feature"
* tag 'erofs-for-5.13-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix 1 lcluster-sized pcluster for big pcluster
erofs: update documentation about data compression
erofs: fix broken illustration in documentation
Linus Torvalds [Sat, 15 May 2021 15:32:51 +0000 (08:32 -0700)]
Merge tag 'libnvdimm-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A regression fix for a bootup crash condition introduced in this merge
window and some other minor fixups:
- Fix regression in ACPI NFIT table handling leading to crashes and
driver load failures.
- Move the nvdimm mailing list
- Miscellaneous minor fixups"
* tag 'libnvdimm-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: NFIT: Fix support for variable 'SPA' structure size
MAINTAINERS: Move nvdimm mailing list
tools/testing/nvdimm: Make symbol '__nfit_test_ioremap' static
libnvdimm: Remove duplicate struct declaration
Linus Torvalds [Sat, 15 May 2021 15:28:08 +0000 (08:28 -0700)]
Merge tag 'dax-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"A fix for a hang condition due to missed wakeups in the filesystem-dax
core when exercised by virtiofs.
This bug has been there from the beginning, but the condition has
not triggered on other filesystems since they hold a lock over
invalidation events"
* tag 'dax-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Wake up all waiters after invalidating dax entry
dax: Add a wakeup mode parameter to put_unlocked_entry()
dax: Add an enum for specifying dax wakup mode
Linus Torvalds [Sat, 15 May 2021 15:18:29 +0000 (08:18 -0700)]
Merge tag 'drm-fixes-2021-05-15' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"Looks like I wasn't the only one not fully switched on this week. The
msm pull has a missing tag so I missed it, and i915 team were a bit
late. In my defence I did have a day with the roof of my home office
removed, so was sitting at my kids desk.
i915:
- Fix active callback alignment annotations and subsequent crashes
- Retract link training strategy to slow and wide, again
- Avoid division by zero on gen2
- Use correct width reads for C0DRB3/C1DRB3 registers
- Fix double free in pdp allocation failure path
- Fix HDMI 2.1 PCON downstream caps check"
* tag 'drm-fixes-2021-05-15' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Use correct downstream caps for check Src-Ctl mode for PCON
drm/i915/overlay: Fix active retire callback alignment
drm/i915: Fix crash in auto_retire
drm/i915/gt: Fix a double free in gen8_preallocate_top_level_pdp
drm/i915: Read C0DRB3/C1DRB3 as 16 bits again
drm/i915: Avoid div-by-zero on gen2
drm/i915/dp: Use slow and wide link training for everything
drm/msm/dp: initialize audio_comp when audio starts
drm/msm/dp: check sink_count before update is_connected status
drm/msm: fix minor version to indicate MSM_PARAM_SUSPENDS support
drm/msm/dsi: fix msm_dsi_phy_get_clk_provider return code
drm/msm/dsi: dsi_phy_28nm_8960: fix uninitialized variable access
drm/msm: fix LLC not being enabled for mmu500 targets
drm/msm: Do not unpin/evict exported dma-buf's
syzbot is reporting OOB write at vga16fb_imageblit() [1], for
resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether
requested rows/columns fit the amount of memory reserved for the graphical
screen if current mode is KD_GRAPHICS.
Peter Zijlstra [Wed, 14 Apr 2021 12:45:43 +0000 (14:45 +0200)]
openrisc: Define memory barrier mb
This came up in the discussion of the requirements of qspinlock on an
architecture. OpenRISC uses qspinlock, but it was noticed that the
memmory barrier was not defined.
Peter defined it in the mail thread writing:
As near as I can tell this should do. The arch spec only lists
this one instruction and the text makes it sound like a completion
barrier.
API qedf_link_update() is getting called from QED but by that time
shost_data is not initialised. This results in a NULL pointer dereference
when we try to dereference shost_data while updating supported_speeds.
Add a NULL pointer check before dereferencing shost_data.
Christophe Leroy [Sat, 15 May 2021 00:27:39 +0000 (17:27 -0700)]
mm/ioremap: fix iomap_max_page_shift
iomap_max_page_shift is expected to contain a page shift, so it can't be a
'bool', has to be an 'unsigned int'
And fix the default values: P4D_SHIFT is when huge iomap is allowed.
However, on some architectures (eg: powerpc book3s/64), P4D_SHIFT is not a
constant so it can't be used to initialise a static variable. So,
initialise iomap_max_page_shift with a maximum shift supported by the
architecture, it is gated by P4D_SHIFT in vmap_try_huge_p4d() anyway.
Rasmus Villemoes [Sat, 15 May 2021 00:27:36 +0000 (17:27 -0700)]
docs: admin-guide: update description for kernel.modprobe sysctl
When I added CONFIG_MODPROBE_PATH, I neglected to update Documentation/.
It's still true that this defaults to /sbin/modprobe, but now via a level
of indirection. So document that the kernel might have been built with
something other than /sbin/modprobe as the initial value.
Jouni Roivas [Sat, 15 May 2021 00:27:33 +0000 (17:27 -0700)]
hfsplus: prevent corruption in shrinking truncate
I believe there are some issues introduced by commit 31651c607151
("hfsplus: avoid deadlock on file truncation")
HFS+ has extent records which always contains 8 extents. In case the
first extent record in catalog file gets full, new ones are allocated from
extents overflow file.
In case shrinking truncate happens to middle of an extent record which
locates in extents overflow file, the logic in hfsplus_file_truncate() was
changed so that call to hfs_brec_remove() is not guarded any more.
Right action would be just freeing the extents that exceed the new size
inside extent record by calling hfsplus_free_extents(), and then check if
the whole extent record should be removed. However since the guard
(blk_cnt > start) is now after the call to hfs_brec_remove(), this has
unfortunate effect that the last matching extent record is removed
unconditionally.
To reproduce this issue, create a file which has at least 10 extents, and
then perform shrinking truncate into middle of the last extent record, so
that the number of remaining extents is not under or divisible by 8. This
causes the last extent record (8 extents) to be removed totally instead of
truncating into middle of it. Thus this causes corruption, and lost data.
Fix for this is simply checking if the new truncated end is below the
start of this extent record, making it safe to remove the full extent
record. However call to hfs_brec_remove() can't be moved to it's previous
place since we're dropping ->tree_lock and it can cause a race condition
and the cached info being invalidated possibly corrupting the node data.
Another issue is related to this one. When entering into the block
(blk_cnt > start) we are not holding the ->tree_lock. We break out from
the loop not holding the lock, but hfs_find_exit() does unlock it. Not
sure if it's possible for someone else to take the lock under our feet,
but it can cause hard to debug errors and premature unlocking. Even if
there's no real risk of it, the locking should still always be kept in
balance. Thus taking the lock now just before the check.
A readahead request will not allocate more memory than can be represented
by a size_t, even on systems that have HIGHMEM available. Change the
length functions from returning an loff_t to a size_t.
kasan: fix unit tests with CONFIG_UBSAN_LOCAL_BOUNDS enabled
These tests deliberately access these arrays out of bounds, which will
cause the dynamic local bounds checks inserted by
CONFIG_UBSAN_LOCAL_BOUNDS to fail and panic the kernel. To avoid this
problem, access the arrays via volatile pointers, which will prevent the
compiler from being able to determine the array bounds.
These accesses use volatile pointers to char (char *volatile) rather than
the more conventional pointers to volatile char (volatile char *) because
we want to prevent the compiler from making inferences about the pointer
itself (i.e. its array bounds), not the data that it refers to.
32-bit architectures which expect 8-byte alignment for 8-byte integers and
need 64-bit DMA addresses (arm, mips, ppc) had their struct page
inadvertently expanded in 2019. When the dma_addr_t was added, it forced
the alignment of the union to 8 bytes, which inserted a 4 byte gap between
'flags' and the union.
Fix this by storing the dma_addr_t in one or two adjacent unsigned longs.
This restores the alignment to that of an unsigned long. We always
store the low bits in the first word to prevent the PageTail bit from
being inadvertently set on a big endian platform. If that happened,
get_user_pages_fast() racing against a page which was freed and
reallocated to the page_pool could dereference a bogus compound_head(),
which would be hard to trace back to this cause.
Hugh Dickins [Sat, 15 May 2021 00:27:22 +0000 (17:27 -0700)]
ksm: revert "use GET_KSM_PAGE_NOLOCK to get ksm page in remove_rmap_item_from_tree()"
This reverts commit 3e96b6a2e9ad929a3230a22f4d64a74671a0720b. General
Protection Fault in rmap_walk_ksm() under memory pressure:
remove_rmap_item_from_tree() needs to take page lock, of course.
Axel Rasmussen [Sat, 15 May 2021 00:27:19 +0000 (17:27 -0700)]
userfaultfd: release page in error path to avoid BUG_ON
Consider the following sequence of events:
1. Userspace issues a UFFD ioctl, which ends up calling into
shmem_mfill_atomic_pte(). We successfully account the blocks, we
shmem_alloc_page(), but then the copy_from_user() fails. We return
-ENOENT. We don't release the page we allocated.
2. Our caller detects this error code, tries the copy_from_user() after
dropping the mmap_lock, and retries, calling back into
shmem_mfill_atomic_pte().
3. Meanwhile, let's say another process filled up the tmpfs being used.
4. So shmem_mfill_atomic_pte() fails to account blocks this time, and
immediately returns - without releasing the page.
This triggers a BUG_ON in our caller, which asserts that the page
should always be consumed, unless -ENOENT is returned.
To fix this, detect if we have such a "dangling" page when accounting
fails, and if so, release it before returning.
Phillip Lougher [Sat, 15 May 2021 00:27:16 +0000 (17:27 -0700)]
squashfs: fix divide error in calculate_skip()
Sysbot has reported a "divide error" which has been identified as being
caused by a corrupted file_size value within the file inode. This value
has been corrupted to a much larger value than expected.
Calculate_skip() is passed i_size_read(inode) >> msblk->block_log. Due to
the file_size value corruption this overflows the int argument/variable in
that function, leading to the divide error.
This patch changes the function to use u64. This will accommodate any
unexpectedly large values due to corruption.
The value returned from calculate_skip() is clamped to be never more than
SQUASHFS_CACHED_BLKS - 1, or 7. So file_size corruption does not lead to
an unexpectedly large return result here.
Alistair Popple [Sat, 15 May 2021 00:27:13 +0000 (17:27 -0700)]
kernel/resource: fix return code check in __request_free_mem_region
Splitting an earlier version of a patch that allowed calling
__request_region() while holding the resource lock into a series of
patches required changing the return code for the newly introduced
__request_region_locked().
Unfortunately this change was not carried through to a subsequent commit 56fd94919b8b ("kernel/resource: fix locking in request_free_mem_region")
in the series. This resulted in a use-after-free due to freeing the
struct resource without properly releasing it. Fix this by correcting the
return code check so that the struct is not freed if the request to add it
was successful.
Vlastimil Babka [Sat, 15 May 2021 00:27:10 +0000 (17:27 -0700)]
mm, slub: move slub_debug static key enabling outside slab_mutex
Paul E. McKenney reported [1] that commit 1f0723a4c0df ("mm, slub: enable
slub_debug static key when creating cache with explicit debug flags")
results in the lockdep complaint:
======================================================
WARNING: possible circular locking dependency detected
5.12.0+ #15 Not tainted
------------------------------------------------------
rcu_torture_sta/109 is trying to acquire lock: ffffffff96063cd0 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0x9/0x20
but task is already holding lock: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
This is because there's one order of locking from the hotplug callbacks:
lock(cpu_hotplug_lock); // from hotplug machinery itself
lock(slab_mutex); // in e.g. slab_mem_going_offline_callback()
And commit 1f0723a4c0df made the reverse sequence possible:
lock(slab_mutex); // in kmem_cache_create_usercopy()
lock(cpu_hotplug_lock); // kmem_cache_open() -> static_key_enable()
The simplest fix is to move static_key_enable() to a place before slab_mutex is
taken. That means kmem_cache_create_usercopy() in mm/slab_common.c which is not
ideal for SLUB-specific code, but the #ifdef CONFIG_SLUB_DEBUG makes it
at least self-contained and obvious.
Peter Xu [Sat, 15 May 2021 00:27:07 +0000 (17:27 -0700)]
mm/hugetlb: fix cow where page writtable in child
When rework early cow of pinned hugetlb pages, we moved huge_ptep_get()
upper but overlooked a side effect that the huge_ptep_get() will fetch the
pte after wr-protection. After moving it upwards, we need explicit
wr-protect of child pte or we will keep the write bit set in the child
process, which could cause data corrution where the child can write to the
original page directly.
This issue can also be exposed by "memfd_test hugetlbfs" kselftest.
Peter Xu [Sat, 15 May 2021 00:27:04 +0000 (17:27 -0700)]
mm/hugetlb: fix F_SEAL_FUTURE_WRITE
Patch series "mm/hugetlb: Fix issues on file sealing and fork", v2.
Hugh reported issue with F_SEAL_FUTURE_WRITE not applied correctly to
hugetlbfs, which I can easily verify using the memfd_test program, which
seems that the program is hardly run with hugetlbfs pages (as by default
shmem).
Meanwhile I found another probably even more severe issue on that hugetlb
fork won't wr-protect child cow pages, so child can potentially write to
parent private pages. Patch 2 addresses that.
After this series applied, "memfd_test hugetlbfs" should start to pass.
This patch (of 2):
F_SEAL_FUTURE_WRITE is missing for hugetlb starting from the first day.
There is a test program for that and it fails constantly.
Bart Van Assche [Thu, 13 May 2021 16:49:12 +0000 (09:49 -0700)]
scsi: ufs: core: Increase the usable queue depth
With the current implementation of the UFS driver active_queues is 1
instead of 0 if all UFS request queues are idle. That causes
hctx_may_queue() to divide the queue depth by 2 when queueing a request and
hence reduces the usable queue depth.
The shared tag set code in the block layer keeps track of the number of
active request queues. blk_mq_tag_busy() is called before a request is
queued onto a hwq and blk_mq_tag_idle() is called some time after the hwq
became idle. blk_mq_tag_idle() is called from inside blk_mq_timeout_work().
Hence, blk_mq_tag_idle() is only called if a timer is associated with each
request that is submitted to a request queue that shares a tag set with
another request queue.
Adds a blk_mq_start_request() call in ufshcd_exec_dev_cmd(). This doubles
the queue depth on my test setup from 16 to 32.
In addition to increasing the usable queue depth, also fix the
documentation of the 'timeout' parameter in the header above
ufshcd_exec_dev_cmd().
Matt Wang [Tue, 11 May 2021 03:04:37 +0000 (03:04 +0000)]
scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic
Commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit")
introduced a serious issue for 64-bit systems. With this commit,
64-bit kernel will enumerate 8*15 non-existing disks. This is caused
by the broken CCB structure. The change from u32 data to void *data
increased CCB length on 64-bit system, which introduced an extra 4
byte offset of the CDB. This leads to incorrect response to INQUIRY
commands during enumeration.
Fix disk enumeration failure by reverting the portion of the commit
above which switched the data pointer from u32 to void.
Peter Wang [Wed, 12 May 2021 10:01:45 +0000 (18:01 +0800)]
scsi: ufs: ufs-mediatek: Fix power down spec violation
As per spec, e.g. JESD220E chapter 7.2, while powering off the UFS device,
RST_N signal should be between VSS(Ground) and VCCQ/VCCQ2. The power down
sequence after fixing:
Linus Torvalds [Fri, 14 May 2021 20:44:51 +0000 (13:44 -0700)]
Merge tag 'trace-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix trace_check_vprintf() for %.*s
The sanity check of all strings being read from the ring buffer to
make sure they are in safe memory space did not account for the %.*s
notation having another parameter to process (the length).
Add that to the check"
* tag 'trace-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Handle %.*s in trace_check_vprintf()
Dave Airlie [Fri, 14 May 2021 20:12:45 +0000 (06:12 +1000)]
Merge tag 'drm-intel-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.13-rc2:
- Fix active callback alignment annotations and subsequent crashes
- Retract link training strategy to slow and wide, again
- Avoid division by zero on gen2
- Use correct width reads for C0DRB3/C1DRB3 registers
- Fix double free in pdp allocation failure path
- Fix HDMI 2.1 PCON downstream caps check
Linus Torvalds [Fri, 14 May 2021 17:52:47 +0000 (10:52 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Fixes and cpucaps.h automatic generation:
- Generate cpucaps.h at build time rather than carrying lots of
#defines. Merged at -rc1 to avoid some conflicts during the merge
window.
- Initialise RGSR_EL1.SEED in __cpu_setup() as it may be left as 0
out of reset and the IRG instruction would not function as expected
if only the architected pseudorandom number generator is
implemented.
- Fix potential race condition in __sync_icache_dcache() where the
PG_dcache_clean page flag is set before the actual cache
maintenance.
- Fix header include in BTI kselftests"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
arm64: tools: Add __ASM_CPUCAPS_H to the endif in cpucaps.h
arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup
kselftest/arm64: Add missing stddef.h include to BTI tests
arm64: Generate cpucaps.h
Linus Torvalds [Fri, 14 May 2021 17:49:20 +0000 (10:49 -0700)]
Merge tag 'f2fs-5.13-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"This fixes some critical bugs such as memory leak in compression
flows, kernel panic when handling errors, and swapon failure due to
newly added condition check"
* tag 'f2fs-5.13-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: return EINVAL for hole cases in swap file
f2fs: avoid swapon failure by giving a warning first
f2fs: compress: fix to assign cc.cluster_idx correctly
f2fs: compress: fix race condition of overwrite vs truncate
f2fs: compress: fix to free compress page correctly
f2fs: support iflag change given the mask
f2fs: avoid null pointer access when handling IPU error
radeon:
- Fixes for flexible array conversions
- Fix for flickering on Oland with multiple 4K displays
vc4:
- drop unused function"
* tag 'drm-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: update vcn1.0 Non-DPG suspend sequence
drm/amdgpu: set vcn mgcg flag for picasso
drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
drm/amdgpu: update the method for harvest IP for specific SKU
drm/amdgpu: add judgement when add ip blocks (v2)
drm/amd/display: Initialize attribute for hdcp_srm sysfs file
drm/amd/pm: Fix out-of-bounds bug
drm/radeon/si_dpm: Fix SMU power state load
drm/radeon/ni_dpm: Fix booting bug
MAINTAINERS: Update address for Emma Anholt
MAINTAINERS: Update my e-mail
drm/vc4: remove unused function
drm/ttm: Do not add non-system domain BO into swap list
Catalin Marinas [Fri, 14 May 2021 09:50:01 +0000 (10:50 +0100)]
arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
To ensure that instructions are observable in a new mapping, the arm64
set_pte_at() implementation cleans the D-cache and invalidates the
I-cache to the PoU. As an optimisation, this is only done on executable
mappings and the PG_dcache_clean page flag is set to avoid future cache
maintenance on the same page.
When two different processes map the same page (e.g. private executable
file or shared mapping) there's a potential race on checking and setting
PG_dcache_clean via set_pte_at() -> __sync_icache_dcache(). While on the
fault paths the page is locked (PG_locked), mprotect() does not take the
page lock. The result is that one process may see the PG_dcache_clean
flag set but the I/D cache maintenance not yet performed.
Avoid test_and_set_bit(PG_dcache_clean) in favour of separate test_bit()
and set_bit(). In the rare event of a race, the cache maintenance is
done twice.
Bart Van Assche [Thu, 13 May 2021 17:15:29 +0000 (10:15 -0700)]
blk-mq: Swap two calls in blk_mq_exit_queue()
If a tag set is shared across request queues (e.g. SCSI LUNs) then the
block layer core keeps track of the number of active request queues in
tags->active_queues. blk_mq_tag_busy() and blk_mq_tag_idle() update that
atomic counter if the hctx flag BLK_MQ_F_TAG_QUEUE_SHARED is set. Make
sure that blk_mq_exit_queue() calls blk_mq_tag_idle() before that flag is
cleared by blk_mq_del_queue_tag_set().
Ming Lei [Fri, 14 May 2021 02:20:52 +0000 (10:20 +0800)]
blk-mq: plug request for shared sbitmap
In case of shared sbitmap, request won't be held in plug list any more
sine commit 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per
tagset"), this way makes request merge from flush plug list & batching
submission not possible, so cause performance regression.
Yanhui reports performance regression when running sequential IO
test(libaio, 16 jobs, 8 depth for each job) in VM, and the VM disk
is emulated with image stored on xfs/megaraid_sas.
Fix the issue by recovering original behavior to allow to hold request
in plug list.
xen/swiotlb: check if the swiotlb has already been initialized
xen_swiotlb_init calls swiotlb_late_init_with_tbl, which fails with
-ENOMEM if the swiotlb has already been initialized.
Add an explicit check io_tlb_default_mem != NULL at the beginning of
xen_swiotlb_init. If the swiotlb is already initialized print a warning
and return -EEXIST.
On x86, the error propagates.
On ARM, we don't actually need a special swiotlb buffer (yet), any
buffer would do. So ignore the error and continue.
arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required
Although SWIOTLB_NO_FORCE is meant to allow later calls to swiotlb_init,
today dma_direct_map_page returns error if SWIOTLB_NO_FORCE.
For now, without a larger overhaul of SWIOTLB_NO_FORCE, the best we can
do is to avoid setting SWIOTLB_NO_FORCE in mem_init when we know that it
is going to be required later (e.g. Xen requires it).
Vitaly Kuznetsov [Thu, 13 May 2021 07:32:46 +0000 (09:32 +0200)]
clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
Mohammed reports (https://bugzilla.kernel.org/show_bug.cgi?id=213029)
the commit e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO
differences inline") broke vDSO on x86. The problem appears to be that
VDSO_CLOCKMODE_HVCLOCK is an enum value in 'enum vdso_clock_mode' and
'#ifdef VDSO_CLOCKMODE_HVCLOCK' branch evaluates to false (it is not
a define).
Use a dedicated HAVE_VDSO_CLOCKMODE_HVCLOCK define instead.
Pavel Begunkov [Fri, 14 May 2021 11:06:44 +0000 (12:06 +0100)]
io_uring: increase max number of reg buffers
Since recent changes instead of storing a large array of struct
io_mapped_ubuf, we store pointers to them, that is 4 times slimmer and
we should not to so worry about restricting max number of registererd
buffer slots, increase the limit 4 times.
Pavel Begunkov [Fri, 14 May 2021 11:05:46 +0000 (12:05 +0100)]
io_uring: further remove sqpoll limits on opcodes
There are three types of requests that left disabled for sqpoll, namely
epoll ctx, statx, and resources update. Since SQPOLL task is now closely
mimics a userspace thread, remove the restrictions.
Pavel Begunkov [Fri, 14 May 2021 11:02:50 +0000 (12:02 +0100)]
io_uring: fix ltout double free on completion race
Always remove linked timeout on io_link_timeout_fn() from the master
request link list, otherwise we may get use-after-free when first
io_link_timeout_fn() puts linked timeout in the fail path, and then
will be found and put on master's free.
Hsin-Yi Wang [Tue, 20 Apr 2021 13:30:50 +0000 (21:30 +0800)]
misc: eeprom: at24: check suspend status before disable regulator
cd5676db0574 ("misc: eeprom: at24: support pm_runtime control") disables
regulator in runtime suspend. If runtime suspend is called before
regulator disable, it will results in regulator unbalanced disabling.
uio_hv_generic: Fix a memory leak in error handling paths
If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be
updated and 'hv_uio_cleanup()' in the error handling path will not be
able to free the corresponding buffer.
In such a case, we need to free the buffer explicitly.
Martin Ågren [Thu, 22 Apr 2021 19:22:40 +0000 (21:22 +0200)]
uio/uio_pci_generic: fix return value changed in refactoring
Commit ef84928cff58 ("uio/uio_pci_generic: use device-managed function
equivalents") was able to simplify various error paths thanks to no
longer having to clean up on the way out. Some error paths were dropped,
others were simplified. In one of those simplifications, the return
value was accidentally changed from -ENODEV to -ENOMEM. Restore the old
return value.
Takashi Sakamoto [Thu, 13 May 2021 12:56:52 +0000 (21:56 +0900)]
ALSA: firewire-lib: fix amdtp_packet tracepoints event for packet_index field
The snd_firewire_lib:amdtp_packet tracepoints event includes index of
packet processed in a context handling. However in IR context, it is not
calculated as expected.
Takashi Sakamoto [Thu, 13 May 2021 12:56:51 +0000 (21:56 +0900)]
ALSA: firewire-lib: fix calculation for size of IR context payload
The quadlets for CIP header is handled as a part of IR context header,
thus it doesn't join in IR context payload. However current calculation
includes the quadlets in IR context payload.
Takashi Sakamoto [Thu, 13 May 2021 12:56:49 +0000 (21:56 +0900)]
ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro
Mackie d.2 has an extension card for IEEE 1394 communication, which uses
BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in
function for IEEE 1394 communication by Oxford Semiconductor OXFW971,
according to schematic diagram available in Mackie website. Although I
misunderstood that Mackie d.2 Pro would be also a model with OXFW971,
it's wrong. Mackie d.2 Pro is a model which includes the extension card
as factory settings.
This commit fixes entries in Kconfig and comment in ALSA OXFW driver.
Takashi Sakamoto [Thu, 13 May 2021 12:56:48 +0000 (21:56 +0900)]
ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26
Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.
Nicholas Piggin [Fri, 14 May 2021 04:40:08 +0000 (14:40 +1000)]
powerpc/64e/interrupt: Fix nvgprs being clobbered
Some interrupt handlers have an "extra" that saves 1 or 2
registers (r14, r15) in the paca save area and makes them available to
use by the handler.
The change to always save nvgprs in exception handlers lead to some
interrupt handlers saving those scratch r14 / r15 registers into the
interrupt frame's GPR saves, which get restored on interrupt exit.
Fix this by always reloading those scratch registers from paca before
the EXCEPTION_COMMON that saves nvgprs.
Nicholas Piggin [Mon, 3 May 2021 11:17:08 +0000 (21:17 +1000)]
powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled
scv support introduced the notion of code that implicitly soft-masks
irqs due to the instruction addresses. This is required because scv
enters the kernel with MSR[EE]=1.
If a NMI (including soft-NMI) interrupt hits when we are implicitly
soft-masked then its regs->softe does not reflect this because it is
derived from the explicit soft mask state (paca->irq_soft_mask). This
makes arch_irq_disabled_regs(regs) return false.
This can trigger a warning in the soft-NMI watchdog code (shown below).
Fix it by having NMI interrupts set regs->softe to disabled in case of
interrupting an implicit soft-masked region.
The stf entry barrier fallback is unsafe to execute in a semi-patched
state, which can happen when enabling/disabling the mitigation with
strict kernel RWX enabled and using the hash MMU.
See the previous commit for more details.
Fix it by changing the order in which we patch the instructions.
Note the stf barrier fallback is only used on Power6 or earlier.
The entry flush mitigation can be enabled/disabled at runtime. When this
happens it results in the kernel patching its own instructions to
enable/disable the mitigation sequence.
With strict kernel RWX enabled instruction patching happens via a
secondary mapping of the kernel text, so that we don't have to make the
primary mapping writable. With the hash MMU this leads to a hash fault,
which causes us to execute the exception entry which contains the entry
flush mitigation.
This means we end up executing the entry flush in a semi-patched state,
ie. after we have patched the first instruction but before we patch the
second or third instruction of the sequence.
On machines with updated firmware the entry flush is a series of special
nops, and it's safe to to execute in a semi-patched state.
However when using the fallback flush the sequence is mflr/branch/mtlr,
and so it's not safe to execute if we have patched out the mflr but not
the other two instructions. Doing so leads to us corrputing LR, leading
to an oops, for example:
The simplest fix is to change the order in which we patch the
instructions, so that the sequence is always safe to execute. For the
non-fallback flushes it doesn't matter what order we patch in.
powerpc/64s: Fix crashes when toggling entry flush barrier
The entry flush mitigation can be enabled/disabled at runtime via a
debugfs file (entry_flush), which causes the kernel to patch itself to
enable/disable the relevant mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
Shows that we returned to userspace with a corrupted LR that points into
the kernel, due to executing the partially patched call to the fallback
entry flush (ie. we missed the LR restore).
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
powerpc/64s: Fix crashes when toggling stf barrier
The STF (store-to-load forwarding) barrier mitigation can be
enabled/disabled at runtime via a debugfs file (stf_barrier), which
causes the kernel to patch itself to enable/disable the relevant
mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
Shows that we returned to userspace without restoring the user r13
value, due to executing the partially patched STF exit code.
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Filipe Manana [Wed, 12 May 2021 15:27:16 +0000 (16:27 +0100)]
btrfs: fix removed dentries still existing after log is synced
When we move one inode from one directory to another and both the inode
and its previous parent directory were logged before, we are not supposed
to have the dentry for the old parent if we have a power failure after the
log is synced. Only the new dentry is supposed to exist.
Generally this works correctly, however there is a scenario where this is
not currently working, because the old parent of the file/directory that
was moved is not authoritative for a range that includes the dir index and
dir item keys of the old dentry. This case is better explained with the
following example and reproducer:
# The test requires a very specific layout of keys and items in the
# fs/subvolume btree to trigger the bug. So we want to make sure that
# on whatever platform we are, we have the same leaf/node size.
#
# Currently in btrfs the node/leaf size can not be smaller than the page
# size (but it can be greater than the page size). So use the largest
# supported node/leaf size (64K).
$ mkfs.btrfs -f -n 65536 /dev/sdc
$ mount /dev/sdc /mnt
# Create several empty files to have the directory "testdir" with its
# items spread over several leaves (7 in this case).
$ for ((i = 1; i <= 1200; i++)); do
echo -n > /mnt/testdir/file$i
done
# Create our test directory "dira", inode number 1458, which gets all
# its items in leaf 7.
#
# The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to
# the entry named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY
# item that points to that entry is in leaf 3.
#
# For this particular filesystem node size (64K), file count and file
# names, we endup with the directory entry items from inode 257 in
# leaves 2 and 3, as previously mentioned - what matters for triggering
# the bug exercised by this test case is that those items are not placed
# in leaf 1, they must be placed in a leaf different from the one
# containing the inode item for inode 257.
#
# The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for
# the parent inode (257) are the following:
#
# item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34
# location key (1458 INODE_ITEM 0) type DIR
# transid 6 data_len 0 name_len 4
# name: dira
#
# and:
#
# item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34
# location key (1458 INODE_ITEM 0) type DIR
# transid 6 data_len 0 name_len 4
# name: dira
$ mkdir /mnt/testdir/dira
# Make sure everything done so far is durably persisted.
$ sync
# Now do a change to inode 257 ("testdir") that does not result in
# COWing leaves 2 and 3 - the leaves that contain the directory items
# pointing to inode 1458 (directory "dira").
#
# Changing permissions, the owner/group, updating or adding a xattr,
# etc, will not change (COW) leaves 2 and 3. So for the sake of
# simplicity change the permissions of inode 257, which results in
# updating its inode item and therefore change (COW) only leaf 1.
$ chmod 700 /mnt/testdir
# Now fsync directory inode 257.
#
# Since only the first leaf was changed/COWed, we log the inode item of
# inode 257 and only the dentries found in the first leaf, all have a
# key type of BTRFS_DIR_ITEM_KEY, and no keys of type
# BTRFS_DIR_INDEX_KEY, because they sort after the former type and none
# exist in the first leaf.
#
# We also log 3 items that represent ranges for dir items and dir
# indexes for which the log is authoritative:
#
# 1) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
# authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset
# in the range [0, 2285968570] (the offset here is the crc32c of the
# dentry's name). The value 2285968570 corresponds to the offset of
# the first key of leaf 2 (which is of type BTRFS_DIR_ITEM_KEY);
#
# 2) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
# authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset
# in the range [4293818216, (u64)-1] (the offset here is the crc32c
# of the dentry's name). The value 4293818216 corresponds to the
# offset of the highest key of type BTRFS_DIR_ITEM_KEY plus 1
# (4293818215 + 1), which is located in leaf 2;
#
# 3) a key of type BTRFS_DIR_LOG_INDEX_KEY, with an offset of 1203,
# which indicates the log is authoritative for all keys of type
# BTRFS_DIR_INDEX_KEY that have an offset in the range
# [1203, (u64)-1]. The value 1203 corresponds to the offset of the
# last key of type BTRFS_DIR_INDEX_KEY plus 1 (1202 + 1), which is
# located in leaf 3;
#
# Also, because "testdir" is a directory and inode 1458 ("dira") is a
# child directory, we log inode 1458 too.
$ xfs_io -c "fsync" /mnt/testdir
# Now move "dira", inode 1458, to be a child of the root directory
# (inode 256).
#
# Because this inode was previously logged, when "testdir" was fsynced,
# the log is updated so that the old inode reference, referring to inode
# 257 as the parent, is deleted and the new inode reference, referring
# to inode 256 as the parent, is added to the log.
$ mv /mnt/testdir/dira /mnt
# Now change some file and fsync it. This guarantees the log changes
# made by the previous move/rename operation are persisted. We do not
# need to do any special modification to the file, just any change to
# any file and sync the log.
# Simulate a power failure and then mount again the filesystem to
# replay the log tree. We want to verify that we are able to mount the
# filesystem, meaning log replay was successful, and that directory
# inode 1458 ("dira") only has inode 256 (the filesystem's root) as
# its parent (and no longer a child of inode 257).
#
# It used to happen that during log replay we would end up having
# inode 1458 (directory "dira") with 2 hard links, being a child of
# inode 257 ("testdir") and inode 256 (the filesystem's root). This
# resulted in the tree checker detecting the issue and causing the
# mount operation to fail (with -EIO).
#
# This happened because in the log we have the new name/parent for
# inode 1458, which results in adding the new dentry with inode 256
# as the parent, but the previous dentry, under inode 257 was never
# removed - this is because the ranges for dir items and dir indexes
# of inode 257 for which the log is authoritative do not include the
# old dir item and dir index for the dentry of inode 257 referring to
# inode 1458:
#
# - for dir items, the log is authoritative for the ranges
# [0, 2285968570] and [4293818216, (u64)-1]. The dir item at inode 257
# pointing to inode 1458 has a key of (257 DIR_ITEM 3724298081), as
# previously mentioned, so the dir item is not deleted when the log
# replay procedure processes the authoritative ranges, as 3724298081
# is outside both ranges;
#
# - for dir indexes, the log is authoritative for the range
# [1203, (u64)-1], and the dir index item of inode 257 pointing to
# inode 1458 has a key of (257 DIR_INDEX 1202), as previously
# mentioned, so the dir index item is not deleted when the log
# replay procedure processes the authoritative range.
<power failure>
$ mount /dev/sdc /mnt
mount: /mnt: can't read superblock on /dev/sdc.
In this example the inode we moved was a directory, so it was easy to
detect the problem because directories can only have one hard link and
the tree checker immediately detects that. If the moved inode was a file,
then the log replay would succeed and we would end up having both the
new hard link (/mnt/foo) and the old hard link (/mnt/testdir/foo) present,
but only the new one should be present.
Fix this by forcing re-logging of the old parent directory when logging
the new name during a rename operation. This ensures we end up with a log
that is authoritative for a range covering the keys for the old dentry,
therefore causing the old dentry do be deleted when replaying the log.
Boris Burkov [Tue, 6 Apr 2021 22:31:18 +0000 (15:31 -0700)]
btrfs: return whole extents in fiemap
`xfs_io -c 'fiemap <off> <len>' <file>`
can give surprising results on btrfs that differ from xfs.
btrfs prints out extents trimmed to fit the user input. If the user's
fiemap request has an offset, then rather than returning each whole
extent which intersects that range, we also trim the start extent to not
have start < off.
Documentation in filesystems/fiemap.txt and the xfs_io man page suggests
that returning the whole extent is expected.
Some cases which all yield the same fiemap in xfs, but not btrfs:
dd if=/dev/zero of=$f bs=4k count=1
sudo xfs_io -c 'fiemap 0 1024' $f
0: [0..7]: 26624..26631
sudo xfs_io -c 'fiemap 2048 1024' $f
0: [4..7]: 26628..26631
sudo xfs_io -c 'fiemap 2048 4096' $f
0: [4..7]: 26628..26631
sudo xfs_io -c 'fiemap 3584 512' $f
0: [7..7]: 26631..26631
sudo xfs_io -c 'fiemap 4091 5' $f
0: [7..6]: 26631..26630
I believe this is a consequence of the logic for merging contiguous
extents represented by separate extent items. That logic needs to track
the last offset as it loops through the extent items, which happens to
pick up the start offset on the first iteration, and trim off the
beginning of the full extent. To fix it, start `off` at 0 rather than
`start` so that we keep the iteration/merging intact without cutting off
the start of the extent.
after the fix, all the above commands give:
0: [0..7]: 26624..26631
The merging logic is exercised by fstest generic/483, and I have written
a new fstest for checking we don't have backwards or zero-length fiemaps
for cases like those above.
Josef Bacik [Thu, 29 Apr 2021 14:51:34 +0000 (10:51 -0400)]
btrfs: avoid RCU stalls while running delayed iputs
Generally a delayed iput is added when we might do the final iput, so
usually we'll end up sleeping while processing the delayed iputs
naturally. However there's no guarantee of this, especially for small
files. In production we noticed 5 instances of RCU stalls while testing
a kernel release overnight across 1000 machines, so this is relatively
common:
btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error
Commit 7000babddac6 ("btrfs: assign proper values to a bool variable in
dev_extent_hole_check_zoned") assigned false to the hole_start parameter
of dev_extent_hole_check_zoned().
The hole_start parameter is not boolean and returns the start location of
the found hole.
Fixes: 7000babddac6 ("btrfs: assign proper values to a bool variable in dev_extent_hole_check_zoned") Signed-off-by: Johannes Thumshirn <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>