Jan Beulich [Tue, 18 May 2021 16:14:07 +0000 (18:14 +0200)]
xen-pciback: reconfigure also from backend watch handler
When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.
Jan Beulich [Tue, 18 May 2021 16:13:42 +0000 (18:13 +0200)]
xen-pciback: redo VF placement in the virtual topology
The commit referenced below was incomplete: It merely affected what
would get written to the vdev-<N> xenstore node. The guest would still
find the function at the original function number as long as
__xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt
__xen_pcibk_get_pcifront_dev().
Undo overriding the function to zero and instead make sure that VFs at
function zero remain alone in their slot. This has the added benefit of
improving overall capacity, considering that there's only a total of 32
slots available right now (PCI segment and bus can both only ever be
zero at present).
Jan Beulich [Thu, 20 May 2021 11:42:42 +0000 (13:42 +0200)]
x86/Xen: swap NX determination and GDT setup on BSP
xen_setup_gdt(), via xen_load_gdt_boot(), wants to adjust page tables.
For this to work when NX is not available, x86_configure_nx() needs to
be called first.
[jgross] Note that this is a revert of 36104cb9012a82e73 ("x86/xen:
Delay get_cpu_cap until stack canary is established"), which is possible
now that we no longer support running as PV guest in 32-bit mode.
Linus Torvalds [Fri, 21 May 2021 06:15:43 +0000 (20:15 -1000)]
Merge tag 'drm-fixes-2021-05-21-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Usual collection, mostly amdgpu and some i915 regression fixes. I
nearly managed to hose my build/sign machine this week, but I
recovered it just in time, and I even got clang12 built.
dma-buf:
- WARN fix
amdgpu:
- Fix downscaling ratio on DCN3.x
- Fix for non-4K pages
- PCO/RV compute hang fix
- Dongle fix
- Aldebaran codec query support
- Refcount leak fix
- Use after free fix
- Navi12 golden settings updates
- GPU reset fixes
radeon:
- Fix for imported BO handling
i915:
- Pin the L-shape quirked object as unshrinkable to fix crashes
- Disable HiZ Raw Stall Optimization on broken gen7 to fix glitches,
gfx corruption
- GVT: Move mdev attribute groups into kvmgt module to fix kconfig
deps issue
exynos:
- Correct kerneldoc of fimd_shadow_protect_win function
- Drop redundant error messages"
* tag 'drm-fixes-2021-05-21-1' of git://anongit.freedesktop.org/drm/drm:
dma-buf: fix unintended pin/unpin warnings
drm/amdgpu: stop touching sched.ready in the backend
drm/amd/amdgpu: fix a potential deadlock in gpu reset
drm/amdgpu: update sdma golden setting for Navi12
drm/amdgpu: update gc golden setting for Navi12
drm/amdgpu: Fix a use-after-free
drm/amdgpu: add video_codecs query support for aldebaran
drm/amd/amdgpu: fix refcount leak
drm/amd/display: Disconnect non-DP with no EDID
drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang
drm/amdgpu: Fix GPU TLB update error when PAGE_SIZE > AMDGPU_PAGE_SIZE
drm/radeon: use the dummy page for GART if needed
drm/amd/display: Use the correct max downscaling value for DCN3.x family
drm/i915/gt: Disable HiZ Raw Stall Optimization on broken gen7
drm/i915/gem: Pin the L-shape quirked object as unshrinkable
drm/exynos/decon5433: Remove redundant error printing in exynos5433_decon_probe()
drm/exynos: Remove redundant error printing in exynos_dsi_probe()
drm/exynos: correct exynos_drm_fimd kerneldoc
drm/i915/gvt: Move mdev attribute groups into kvmgt module
Dave Airlie [Fri, 21 May 2021 03:41:41 +0000 (13:41 +1000)]
Merge tag 'drm-intel-fixes-2021-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.13-rc3:
- Pin the L-shape quirked object as unshrinkable to fix crashes
- Disable HiZ Raw Stall Optimization on broken gen7 to fix glitches, gfx corruption
- GVT: Move mdev attribute groups into kvmgt module to fix kconfig deps issue
Linus Torvalds [Fri, 21 May 2021 00:46:26 +0000 (14:46 -1000)]
Merge tag 'arm-soc-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Only a small number of fixes so far, including some that I had applied
during the merge window, so this is based on the original merge of the
other branches.
- The largest change is a fix for a reference counting bug in the AMD
TEE driver.
- Neil Armstrong now co-maintains Amlogic SoC support
- Two build warning fixes for renesas device tree files
- A sign expansion bug for optee
- A DT binding fix for a mismerge"
* tag 'arm-soc-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: npcm: wpcm450: select interrupt controller driver
MAINTAINERS: ARM/Amlogic SoCs: add Neil as primary maintainer
tee: amdtee: unload TA only when its refcount becomes 0
dt-bindings: nvmem: mediatek: remove duplicate mt8192 line
firmware: arm_scmi: Remove duplicate declaration of struct scmi_protocol_handle
firmware: arm_scpi: Prevent the ternary sign expansion bug
arm64: dts: renesas: Add port@0 node for all CSI-2 nodes to dtsi
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Fix CSI40 ports
Linus Torvalds [Fri, 21 May 2021 00:43:33 +0000 (14:43 -1000)]
Merge branch 'urgent.2021.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull kcsan fix from Paul McKenney:
"Fix for a regression introduced in this merge window by commit e36299efe7d7 ("kcsan, debugfs: Move debugfs file creation out of early
init").
The regression is not easy to trigger, requiring a KCSAN build using
clang with CONFIG_LTO_CLANG=y. The fix is to simply make the
kcsan_debugfs_init() function's type initcall-compatible. This has
been posted to the relevant mailing lists:"
* 'urgent.2021.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: Fix debugfs initcall return type
Linus Torvalds [Fri, 21 May 2021 00:36:21 +0000 (14:36 -1000)]
Merge tag 'for-5.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix a couple DM snapshot target crashes exposed by user-error.
- Fix DM integrity target to not use discard optimization, introduced
during 5.13 merge, when recalulating.
- Fix some sparse warnings in DM integrity target.
* tag 'for-5.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix sparse warnings
dm integrity: revert to not using discard filler when recalulating
dm snapshot: fix crash with transient storage and zero chunk size
dm snapshot: fix a crash when an origin has no snapshots
When mod_delayed_work is called to modify the delay of pending work,
it might return false and queue a new work when pending work is
already scheduled or when try to grab pending work failed.
So, Increase the reference count when new work is scheduled to
avoid use-after-free.
Linus Torvalds [Thu, 20 May 2021 16:44:04 +0000 (06:44 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A mixture of small bug fixes, most for longer standing problems:
- NULL pointer crash in siw
- Various error unwind bugs in siw, rxe, cm
- User triggerable errors in uverbs
- Minor bugs in mlx5 and rxe drivers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Fix a NULL vs IS_ERR() bug
RDMA/mlx5: Fix query DCT via DEVX
RDMA/core: Don't access cm_id after its destruction
RDMA/rxe: Return CQE error if invalid lkey was supplied
RDMA/mlx5: Recover from fatal event in dual port mode
RDMA/mlx5: Verify that DM operation is reasonable
RDMA/rxe: Clear all QP fields if creation failed
RDMA/core: Prevent divide-by-zero error triggered by the user
RDMA/siw: Release xarray entry
RDMA/siw: Properly check send and receive CQ pointers
Linus Torvalds [Thu, 20 May 2021 16:42:21 +0000 (06:42 -1000)]
Merge tag 'sound-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All small device-specific fixes here: a series of FireWire audio
fixes, UAF and other fixes in USB-audio and co spotted by fuzzer,
and a few HD-audio quirks as usual"
* tag 'sound-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: line6: Fix racy initialization of LINE6 MIDI
ALSA: dice: fix stream format for TC Electronic Konnekt Live at high sampling transfer frequency
ALSA: dice: disable double_pcm_frames mode for M-Audio Profire 610, 2626 and Avid M-Box 3 Pro
ALSA: intel8x0: Don't update period unless prepared
ALSA: hda/realtek: Add some CLOVE SSIDs of ALC293
ALSA: firewire-lib: fix amdtp_packet tracepoints event for packet_index field
ALSA: firewire-lib: fix calculation for size of IR context payload
ALSA: firewire-lib: fix check for the size of isochronous packet payload
ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro
ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26
ALSA: hda/realtek: Add fixup for HP Spectre x360 15-df0xxx
ALSA: usb-audio: Fix potential out-of-bounce access in MIDI EP parser
ALSA: usb-audio: Validate MS endpoint descriptors
ALSA: hda: fixup headset for ASUS GU502 laptop
ALSA: hda/realtek: reset eapd coeff to default value for alc287
Linus Torvalds [Thu, 20 May 2021 16:40:20 +0000 (06:40 -1000)]
Merge tag 'platform-drivers-x86-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Assorted pdx86 bug-fixes and model-specific quirks for 5.13"
* tag 'platform-drivers-x86-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Chuwi Hi10 Pro (CWI529) tablet
platform/x86: touchscreen_dmi: Add info for the Mediacom Winpad 7.0 W700 tablet
platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI
platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios
platform/x86: hp-wireless: add AMD's hardware id to the supported list
platform/x86: intel_int0002_vgpio: Only call enable_irq_wake() when using s2idle
platform/x86: gigabyte-wmi: add support for B550 Aorus Elite
platform/x86: gigabyte-wmi: add support for X570 UD
platform/x86: gigabyte-wmi: streamline dmi matching
platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue
platform/surface: dtx: Fix poll function
platform/surface: aggregator: Add platform-drivers-x86 list to MAINTAINERS entry
platform/surface: aggregator: avoid clang -Wconstant-conversion warning
platform/surface: aggregator: Do not mark interrupt as shared
platform/x86: hp_accel: Avoid invoking _INI to speed up resume
platform/x86: ideapad-laptop: fix method name typo
platform/x86: ideapad-laptop: fix a NULL pointer dereference
Linus Torvalds [Thu, 20 May 2021 16:31:52 +0000 (06:31 -1000)]
Merge tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a big set of char/misc/other driver fixes for 5.13-rc3.
The majority here is the fallout of the umn.edu re-review of all prior
submissions. That resulted in a bunch of reverts along with the
"correct" changes made, such that there is no regression of any of the
potential fixes that were made by those individuals. I would like to
thank the over 80 different developers who helped with the review and
fixes for this mess.
Other than that, there's a few habanna driver fixes for reported
issues, and some dyndbg fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (82 commits)
misc: eeprom: at24: check suspend status before disable regulator
uio_hv_generic: Fix another memory leak in error handling paths
uio_hv_generic: Fix a memory leak in error handling paths
uio/uio_pci_generic: fix return value changed in refactoring
Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""
dyndbg: drop uninformative vpr_info
dyndbg: avoid calling dyndbg_emit_prefix when it has no work
binder: Return EFAULT if we fail BINDER_ENABLE_ONEWAY_SPAM_DETECTION
cdrom: gdrom: initialize global variable at init time
brcmfmac: properly check for bus register errors
Revert "brcmfmac: add a check for the status of usb_register"
video: imsttfb: check for ioremap() failures
Revert "video: imsttfb: fix potential NULL pointer dereferences"
net: liquidio: Add missing null pointer checks
Revert "net: liquidio: fix a NULL pointer dereference"
media: gspca: properly check for errors in po1030_probe()
Revert "media: gspca: Check the return value of write_bridge for timeout"
media: gspca: mt9m111: Check write_bridge for timeout
Revert "media: gspca: mt9m111: Check write_bridge for timeout"
media: dvb: Add check on sp8870_readreg return
...
Linus Torvalds [Thu, 20 May 2021 16:20:15 +0000 (06:20 -1000)]
Merge tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota fixes from Jan Kara:
"The most important part in the pull is disablement of the new syscall
quotactl_path() which was added in rc1.
The reason is some people at LWN discussion pointed out dirfd would be
useful for this path based syscall and Christian Brauner agreed.
Without dirfd it may be indeed problematic for containers. So let's
just disable the syscall for now when it doesn't have users yet so
that we have more time to mull over how to best specify the filesystem
we want to work on"
* tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Disable quotactl_path syscall
quota: Use 'hlist_for_each_entry' to simplify code
Darrick J. Wong [Wed, 12 May 2021 23:41:13 +0000 (16:41 -0700)]
xfs: fix deadlock retry tracepoint arguments
sc->ip is the inode that's being scrubbed, which means that it's not set
for scrub types that don't involve inodes. If one of those scrubbers
(e.g. inode btrees) returns EDEADLOCK, we'll trip over the null pointer.
Fix that by reporting either the file being examined or the file that
was used to call scrub.
Darrick J. Wong [Sun, 9 May 2021 23:22:55 +0000 (16:22 -0700)]
xfs: retry allocations when locality-based search fails
If a realtime allocation fails because we can't find a sufficiently
large free extent satisfying locality rules, relax the locality rules
and try again. This reduces the occurrence of short writes to realtime
files when the write size is large and the free space is fragmented.
This was originally discovered by running generic/186 with the realtime
reflink patchset and a 128k cow extent size hint, but the short write
symptoms can manifest with a 128k extent size hint and no reflink, so
apply the fix now.
Nicholas Piggin [Thu, 20 May 2021 11:19:31 +0000 (21:19 +1000)]
powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
The scv implementation missed updating syscall return value and error
value get/set functions to deal with the changed register ABI. This
broke ptrace PTRACE_GET_SYSCALL_INFO as well as some kernel auditing
and tracing functions.
Fix. tools/testing/selftests/ptrace/get_syscall_info now passes when
scv is used.
Nicholas Piggin [Thu, 20 May 2021 11:19:30 +0000 (21:19 +1000)]
powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
The sc and scv 0 system calls have different ABI conventions, and
ptracers need to know which system call type is being used if they want
to look at the syscall registers.
Document that pt_regs.trap can be used for this, and fix one in-tree user
to work with scv 0 syscalls.
block: prevent block device lookups at the beginning of del_gendisk
As an artifact of how gendisk lookup used to work in earlier kernels,
GENHD_FL_UP is only cleared very late in del_gendisk, and a global lock
is used to prevent opens from succeeding while del_gendisk is tearing
down the gendisk. Switch to clearing the flag early and under bd_mutex
so that callers can use bd_mutex to stabilize the flag, which removes
the need for the global mutex.
* tag 'nvme-5.13-2021-05-20' of git://git.infradead.org/nvme:
nvme-fc: clear q_live at beginning of association teardown
nvme-tcp: rerun io_work if req_list is not empty
nvme-tcp: fix possible use-after-completion
nvme-loop: fix memory leak in nvme_loop_create_ctrl()
nvmet: fix memory leak in nvmet_alloc_ctrl()
When multiple processes write data to the same block group on a
compressed zoned filesystem, the underlying device could report I/O
errors and data corruption is possible.
This happens because on a zoned file system, compressed data writes
where sent to the device via a REQ_OP_WRITE instead of a
REQ_OP_ZONE_APPEND operation. But with REQ_OP_WRITE and parallel
submission it cannot be guaranteed that the data is always submitted
aligned to the underlying zone's write pointer.
The change to using REQ_OP_ZONE_APPEND instead of REQ_OP_WRITE on a
zoned filesystem is non intrusive on a regular file system or when
submitting to a conventional zone on a zoned filesystem, as it is
guarded by btrfs_use_zone_append.
Reported-by: David Sterba <[email protected]> Fixes: 9d294a685fbc ("btrfs: zoned: enable to mount ZONED incompat flag") CC: [email protected] # 5.12.x: e380adfc213a13: btrfs: zoned: pass start block to btrfs_use_zone_append CC: [email protected] # 5.12.x Signed-off-by: Johannes Thumshirn <[email protected]> Signed-off-by: David Sterba <[email protected]>
Pavel Begunkov [Thu, 20 May 2021 12:21:20 +0000 (13:21 +0100)]
io_uring: fortify tctx/io_wq cleanup
We don't want anyone poking into tctx->io_wq awhile it's being destroyed
by io_wq_put_and_exit(), and even though it shouldn't even happen, if
buggy would be preferable to get a NULL-deref instead of subtle delayed
failure or UAF.
Hans de Goede [Thu, 20 May 2021 09:32:28 +0000 (11:32 +0200)]
platform/x86: touchscreen_dmi: Add info for the Chuwi Hi10 Pro (CWI529) tablet
Add touchscreen info for the Chuwi Hi10 Pro (CWI529) tablet. This includes
info for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.
powerpc: Fix early setup to make early_ioremap() work
The immediate problem is that after commit 0bd3f9e953bd ("powerpc/legacy_serial: Use early_ioremap()") the kernel
silently reboots on some systems.
The reason is that early_ioremap() returns broken addresses as it uses
slot_virt[] array which initialized with offsets from FIXADDR_TOP ==
IOREMAP_END+FIXADDR_SIZE == KERN_IO_END - FIXADDR_SIZ + FIXADDR_SIZE ==
__kernel_io_end which is 0 when early_ioremap_setup() is called.
__kernel_io_end is initialized little bit later in early_init_mmu().
This fixes the initialization by swapping early_ioremap_setup() and
early_init_mmu().
When smb2 lease parameter is disabled on server. Server grants
batch oplock instead of RHW lease by default on open, inode page cache
needs to be zapped immediatley upon close as cache is not valid.
Fix kernel oops when CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
Removed oplock_break_received flag which was added to achieve
synchronization between oplock handler and open handler by earlier commit.
It is not needed because there is an existing lock open_file_lock to achieve
the same. find_readable_file takes open_file_lock and then traverses the
openFileList. Similarly, cifs_oplock_break while closing the deferred
handle (i.e cifsFileInfo_put) takes open_file_lock and then sends close
to the server.
Ronnie Sahlberg [Tue, 18 May 2021 22:40:11 +0000 (08:40 +1000)]
cifs: fix memory leak in smb2_copychunk_range
When using smb2_copychunk_range() for large ranges we will
run through several iterations of a loop calling SMB2_ioctl()
but never actually free the returned buffer except for the final
iteration.
This leads to memory leaks everytime a large copychunk is requested.
Chris Park [Tue, 4 May 2021 20:20:55 +0000 (16:20 -0400)]
drm/amd/display: Disconnect non-DP with no EDID
[Why]
Active DP dongles return no EDID when dongle
is connected, but VGA display is taken out.
Current driver behavior does not remove the
active display when this happens, and this is
a gap between dongle DTP and dongle behavior.
[How]
For active DP dongles and non-DP scenario,
disconnect sink on detection when no EDID
is read due to timeout.
Changfeng [Fri, 14 May 2021 07:28:25 +0000 (15:28 +0800)]
drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang
There is problem with 3DCGCG firmware and it will cause compute test
hang on picasso/raven1. It needs to disable 3DCGCG in driver to avoid
compute hang.
Yi Li [Fri, 14 May 2021 06:40:39 +0000 (14:40 +0800)]
drm/amdgpu: Fix GPU TLB update error when PAGE_SIZE > AMDGPU_PAGE_SIZE
When PAGE_SIZE is larger than AMDGPU_PAGE_SIZE, the number of GPU TLB
entries which need to update in amdgpu_map_buffer() should be multiplied
by AMDGPU_GPU_PAGES_IN_CPU_PAGE (PAGE_SIZE / AMDGPU_PAGE_SIZE).
Nikola Cornij [Fri, 7 May 2021 02:46:52 +0000 (22:46 -0400)]
drm/amd/display: Use the correct max downscaling value for DCN3.x family
[why]
As per spec, DCN3.x can do 6:1 downscaling and DCN2.x can do 4:1. The
max downscaling limit value for DCN2.x is 250, which means it's
calculated as 1000 / 4 = 250. For DCN3.x this then gives 1000 / 6 = 167.
[how]
Set maximum downscaling limit to 167 for DCN3.x
Joerg Roedel [Wed, 19 May 2021 13:52:46 +0000 (15:52 +0200)]
x86/sev-es: Use __put_user()/__get_user() for data accesses
The put_user() and get_user() functions do checks on the address which is
passed to them. They check whether the address is actually a user-space
address and whether its fine to access it. They also call might_fault()
to indicate that they could fault and possibly sleep.
All of these checks are neither wanted nor needed in the #VC exception
handler, which can be invoked from almost any context and also for MMIO
instructions from kernel space on kernel memory. All the #VC handler
wants to know is whether a fault happened when the access was tried.
This is provided by __put_user()/__get_user(), which just do the access
no matter what. Also add comments explaining why __get_user() and
__put_user() are the best choice here and why it is safe to use them
in this context. Also explain why copy_to/from_user can't be used.
In addition, also revert commit
7024f60d6552 ("x86/sev-es: Handle string port IO to kernel memory properly")
because using __get_user()/__put_user() fixes the same problem while
the above commit introduced several problems:
1) It uses access_ok() which is only allowed in task context.
2) It uses memcpy() which has no fault handling at all and is
thus unsafe to use here.
[ bp: Fix up commit ID of the reverted commit above. ]
Maor Gottlieb [Wed, 19 May 2021 08:41:32 +0000 (11:41 +0300)]
RDMA/mlx5: Fix query DCT via DEVX
When executing DEVX command to query QP object, we need to take the QP
type from the mlx5_ib_qp struct which hold the driver specific QP types as
well, such as DC.
Linus Torvalds [Wed, 19 May 2021 16:12:31 +0000 (06:12 -1000)]
Merge tag 'fs.idmapped.mount_setattr.v5.13-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr fix from Christian Brauner:
"This makes an underlying idmapping assumption more explicit.
We currently don't have any filesystems that support idmapped mounts
which are mountable inside a user namespace, i.e. where s_user_ns !=
init_user_ns. That was a deliberate decision for now as userns root
can just mount the filesystem themselves.
Express this restriction explicitly and enforce it until there's a
real use-case for this. This way we can notice it and will have a
chance to adapt and audit our translation helpers and fstests
appropriately if we need to support such filesystems"
* tag 'fs.idmapped.mount_setattr.v5.13-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
fs/mount_setattr: tighten permission checks
It turns out this is not ready for primetime yet. The intentions are
good, but using remap_pfn_range() requires that there is nothing already
mapped in the area, and the i915 code seems to very much intentionally
remap the same area multiple times.
That will then just trigger the
BUG_ON(!pte_none(*pte));
in mm/memory.c: remap_pte_range().
There are also reports of mapping type inconsistencies, resulting in
warnings and in screen corruption.
Joerg Roedel [Wed, 19 May 2021 13:52:45 +0000 (15:52 +0200)]
x86/sev-es: Forward page-faults which happen during emulation
When emulating guest instructions for MMIO or IOIO accesses, the #VC
handler might get a page-fault and will not be able to complete. Forward
the page-fault in this case to the correct handler instead of killing
the machine.
Steve French [Sat, 15 May 2021 14:52:22 +0000 (09:52 -0500)]
SMB3: incorrect file id in requests compounded with open
See MS-SMB2 3.2.4.1.4, file ids in compounded requests should be set to
0xFFFFFFFFFFFFFFFF (we were treating it as u32 not u64 and setting
it incorrectly).
Joerg Roedel [Wed, 19 May 2021 13:52:44 +0000 (15:52 +0200)]
x86/sev-es: Don't return NULL from sev_es_get_ghcb()
sev_es_get_ghcb() is called from several places but only one of them
checks the return value. The reaction to returning NULL is always the
same: calling panic() and kill the machine.
Instead of adding checks to all call sites, move the panic() into the
function itself so that it will no longer return NULL.
Takashi Iwai [Tue, 18 May 2021 08:39:39 +0000 (10:39 +0200)]
ALSA: line6: Fix racy initialization of LINE6 MIDI
The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point. This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.
This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race. Also this reduces slightly more lines, so it's a win-win
change.
Hans de Goede [Tue, 18 May 2021 12:50:27 +0000 (14:50 +0200)]
platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios
init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems
where the Dell WMI interface is supported. While exit_dell_smbios_wmi()
unregisters it unconditionally, this leads to the following oops:
Hans de Goede [Wed, 12 May 2021 12:55:23 +0000 (14:55 +0200)]
platform/x86: intel_int0002_vgpio: Only call enable_irq_wake() when using s2idle
Commit 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement
irq_set_wake on Bay Trail") stopped passing irq_set_wake requests on to
the parents IRQ because this was breaking suspend (causing immediate
wakeups) on an Asus E202SA.
This workaround for the Asus E202SA is causing wakeup by USB keyboard to
not work on other devices with Airmont CPU cores such as the Medion Akoya
E1239T. In hindsight the problem with the Asus E202SA has nothing to do
with Silvermont vs Airmont CPU cores, so the differentiation between the
2 types of CPU cores introduced by the previous fix is wrong.
The real issue at hand is s2idle vs S3 suspend where the suspend is
mostly handled by firmware. The parent IRQ for the INT0002 device is shared
with the ACPI SCI and the real problem is that the INT0002 code should not
be messing with the wakeup settings of that IRQ when suspend/resume is
being handled by the firmware.
Note that on systems which support both s2idle and S3 suspend, which
suspend method to use can be changed at runtime.
This patch fixes both the Asus E202SA spurious wakeups issue as well as
the wakeup by USB keyboard not working on the Medion Akoya E1239T issue.
These are both fixed by replacing the old workaround with delaying the
enable_irq_wake(parent_irq) call till system-suspend time and protecting
it with a !pm_suspend_via_firmware() check so that we still do not call
it on devices using firmware-based (S3) suspend such as the Asus E202SA.
Note rather then adding #ifdef CONFIG_PM_SLEEP, this commit simply adds
a "depends on PM_SLEEP" to the Kconfig since this drivers whole purpose
is to deal with wakeup events, so using it without CONFIG_PM_SLEEP makes
no sense.
Liming Sun [Sat, 8 May 2021 00:30:12 +0000 (20:30 -0400)]
platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue
The virtio framework uses wmb() when updating avail->idx. It
guarantees the write order, but not necessarily loading order
for the code accessing the memory. This commit adds a load barrier
after reading the avail->idx to make sure all the data in the
descriptor is visible. It also adds a barrier when returning the
packet to virtio framework to make sure read/writes are visible to
the virtio code.
Maximilian Luz [Thu, 13 May 2021 13:44:37 +0000 (15:44 +0200)]
platform/surface: dtx: Fix poll function
The poll function should not return -ERESTARTSYS.
Furthermore, locking in this function is completely unnecessary. The
ddev->lock protects access to the main device and controller (ddev->dev
and ddev->ctrl), ensuring that both are and remain valid while being
accessed by clients. Both are, however, never accessed in the poll
function. The shutdown test (via atomic bit flags) be safely done
without locking, so drop locking here entirely.
Maximilian Luz [Fri, 14 May 2021 22:19:54 +0000 (00:19 +0200)]
platform/surface: aggregator: Add platform-drivers-x86 list to MAINTAINERS entry
The Surface System Aggregator Module driver entry is currently missing a
mailing list. Surface platform drivers are discussed on the
platform-driver-x86 list and all other Surface platform drivers have a
reference to that list in their entries. So let's add one here as well.
Clang complains about the assignment of SSAM_ANY_IID to
ssam_device_uid->instance:
drivers/platform/surface/surface_aggregator_registry.c:478:25: error: implicit conversion from 'int' to '__u8' (aka 'unsigned char') changes value from 65535 to 255 [-Werror,-Wconstant-conversion]
{ SSAM_VDEV(HUB, 0x02, SSAM_ANY_IID, 0x00) },
~ ^~~~~~~~~~~~
include/linux/surface_aggregator/device.h:71:23: note: expanded from macro 'SSAM_ANY_IID'
#define SSAM_ANY_IID 0xffff
^~~~~~
include/linux/surface_aggregator/device.h:126:63: note: expanded from macro 'SSAM_VDEV'
SSAM_DEVICE(SSAM_DOMAIN_VIRTUAL, SSAM_VIRTUAL_TC_##cat, tid, iid, fun)
^~~
include/linux/surface_aggregator/device.h:102:41: note: expanded from macro 'SSAM_DEVICE'
.instance = ((iid) != SSAM_ANY_IID) ? (iid) : 0, \
^~~
The assignment doesn't actually happen, but clang checks the type limits
before checking whether this assignment is reached. Replace the ?:
operator with a __builtin_choose_expr() invocation that avoids the
warning for the untaken part.
Maximilian Luz [Wed, 5 May 2021 13:36:35 +0000 (15:36 +0200)]
platform/surface: aggregator: Do not mark interrupt as shared
Having both IRQF_NO_AUTOEN and IRQF_SHARED set causes
request_threaded_irq() to return with -EINVAL (see comment in flag
validation in that function). As the interrupt is currently not shared
between multiple devices, drop the IRQF_SHARED flag.
Commit b33fff07e3e3 ("x86, build: allow LTO to be selected") added a
couple of '-plugin-opt=' flags to KBUILD_LDFLAGS because the code model
and stack alignment are not stored in LLVM bitcode.
However, these flags were added to KBUILD_LDFLAGS prior to the
emulation flag assignment, which uses ':=', so they were overwritten
and never added to $(LD) invocations.
The absence of these flags caused misalignment issues in the
AMDGPU driver when compiling with CONFIG_LTO_CLANG, resulting in
general protection faults.
Shuffle the assignment below the initial one so that the flags are
properly passed along and all of the linker flags stay together.
At the same time, avoid any future issues with clobbering flags by
changing the emulation flag assignment to '+=' since KBUILD_LDFLAGS is
already defined with ':=' in the main Makefile before being exported for
modification here as a result of commit:
ce99d0bf312d ("kbuild: clear LDFLAGS in the top Makefile")
Simon Rettberg [Mon, 26 Apr 2021 14:11:24 +0000 (16:11 +0200)]
drm/i915/gt: Disable HiZ Raw Stall Optimization on broken gen7
When resetting CACHE_MODE registers, don't enable HiZ Raw Stall
Optimization on Ivybridge GT1 and Baytrail, as it causes severe glitches
when rendering any kind of 3D accelerated content.
This optimization is disabled on these platforms by default according to
official documentation from 01.org.
Chris Wilson [Mon, 17 May 2021 08:46:40 +0000 (09:46 +0100)]
drm/i915/gem: Pin the L-shape quirked object as unshrinkable
When instantiating a tiled object on an L-shaped memory machine, we mark
the object as unshrinkable to prevent the shrinker from trying to swap
out the pages. We have to do this as we do not know the swizzling on the
individual pages, and so the data will be scrambled across swap out/in.
Not only do we need to move the object off the shrinker list, we need to
mark the object with shrink_pin so that the counter is consistent across
calls to madvise.
v2: in the madvise ioctl we need to check if the object is currently
shrinkable/purgeable, not if the object type supports shrinking
James Smart [Tue, 11 May 2021 04:56:35 +0000 (21:56 -0700)]
nvme-fc: clear q_live at beginning of association teardown
The __nvmf_check_ready() routine used to bounce all filesystem io if the
controller state isn't LIVE. However, a later patch changed the logic so
that it rejection ends up being based on the Q live check. The FC
transport has a slightly different sequence from rdma and tcp for
shutting down queues/marking them non-live. FC marks its queue non-live
after aborting all ios and waiting for their termination, leaving a
rather large window for filesystem io to continue to hit the transport.
Unfortunately this resulted in filesystem I/O or applications seeing I/O
errors.
Change the FC transport to mark the queues non-live at the first sign of
teardown for the association (when I/O is initially terminated).
Keith Busch [Mon, 17 May 2021 22:36:43 +0000 (15:36 -0700)]
nvme-tcp: rerun io_work if req_list is not empty
A possible race condition exists where the request to send data is
enqueued from nvme_tcp_handle_r2t()'s will not be observed by
nvme_tcp_send_all() if it happens to be running. The driver relies on
io_work to send the enqueued request when it is runs again, but the
concurrently running nvme_tcp_send_all() may not have released the
send_mutex at that time. If no future commands are enqueued to re-kick
the io_work, the request will timeout in the SEND_H2C state, resulting
in a timeout error like:
nvme nvme0: queue 1: timeout request 0x3 type 6
Ensure the io_work continues to run as long as the req_list is not empty.
Fixes: db5ad6b7f8cdd ("nvme-tcp: try to send request in queue_rq context") Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
Sagi Grimberg [Mon, 17 May 2021 21:07:45 +0000 (14:07 -0700)]
nvme-tcp: fix possible use-after-completion
Commit db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq
context") added a second context that may perform a network send.
This means that now RX and TX are not serialized in nvme_tcp_io_work
and can run concurrently.
While there is correct mutual exclusion in the TX path (where
the send_mutex protect the queue socket send activity) RX activity,
and more specifically request completion may run concurrently.
This means we must guarantee that any mutation of the request state
related to its lifetime, bytes sent must not be accessed when a completion
may have possibly arrived back (and processed).
The race may trigger when a request completion arrives, processed
_and_ reused as a fresh new request, exactly in the (relatively short)
window between the last data payload sent and before the request iov_iter
is advanced.
Consider the following race:
1. 16K write request is queued
2. The nvme command and the data is sent to the controller (in-capsule
or solicited by r2t)
3. After the last payload is sent but before the req.iter is advanced,
the controller sends back a completion.
4. The completion is processed, the request is completed, and reused
to transfer a new request (write or read)
5. The new request is queued, and the driver reset the request parameters
(nvme_tcp_setup_cmd_pdu).
6. Now context in (2) resumes execution and advances the req.iter
==> use-after-completion as this is already a new request.
Fix this by making sure the request is not advanced after the last
data payload send, knowing that a completion may have arrived already.
An alternative solution would have been to delay the request completion
or state change waiting for reference counting on the TX path, but besides
adding atomic operations to the hot-path, it may present challenges in
multi-stage R2T scenarios where a r2t handler needs to be deferred to
an async execution.
Wu Bo [Wed, 19 May 2021 05:01:09 +0000 (13:01 +0800)]
nvmet: fix memory leak in nvmet_alloc_ctrl()
When creating ctrl in nvmet_alloc_ctrl(), if the cntlid_min is larger
than cntlid_max of the subsystem, and jumps to the
"out_free_changed_ns_list" label, but the ctrl->sqs lack of be freed.
Fix this by jumping to the "out_free_sqs" label.
signalfd: Remove SIL_PERF_EVENT fields from signalfd_siginfo
With the addition of ssi_perf_data and ssi_perf_type struct signalfd_siginfo
is dangerously close to running out of space. All that remains is just
enough space for two additional 64bit fields. A practice of adding all
possible siginfo_t fields into struct singalfd_siginfo can not be supported
as adding the missing fields ssi_lower, ssi_upper, and ssi_pkey would
require two 64bit fields and one 32bit fields. In practice the fields
ssi_perf_data and ssi_perf_type can never be used by signalfd as the signal
that generates them always delivers them synchronously to the thread that
triggers them.
Therefore until someone actually needs the fields ssi_perf_data and
ssi_perf_type in signalfd_siginfo remove them. This leaves a bit more room
for future expansion.
signal: Deliver all of the siginfo perf data in _perf
Don't abuse si_errno and deliver all of the perf data in _perf member
of siginfo_t.
Note: The data field in the perf data structures in a u64 to allow a
pointer to be encoded without needed to implement a 32bit and 64bit
version of the same structure. There already exists a 32bit and 64bit
versions siginfo_t, and the 32bit version can not include a 64bit
member as it only has 32bit alignment. So unsigned long is used in
siginfo_t instead of a u64 as unsigned long can encode a pointer on
all architectures linux supports.
Separate filling in siginfo for TRAP_PERF from deciding that
siginal needs to be sent.
There are enough little details that need to be correct when
properly filling in siginfo_t that it is easy to make mistakes
if filling in the siginfo_t is in the same function with other
logic. So factor out force_sig_perf to reduce the cognative
load of on reviewers, maintainers and implementors.
Now that si_trapno is part of the union in _si_fault and available on
all architectures, add SIL_FAULT_TRAPNO and update siginfo_layout to
return SIL_FAULT_TRAPNO when the code assumes si_trapno is valid.
There is room for future changes to reduce when si_trapno is valid but
this is all that is needed to make si_trapno and the other members of
the the union in _sigfault mutually exclusive.
Update the code that uses siginfo_layout to deal with SIL_FAULT_TRAPNO
and have the same code ignore si_trapno in in all other cases.
siginfo: Move si_trapno inside the union inside _si_fault
It turns out that linux uses si_trapno very sparingly, and as such it
can be considered extra information for a very narrow selection of
signals, rather than information that is present with every fault
reported in siginfo.
As such move si_trapno inside the union inside of _si_fault. This
results in no change in placement, and makes it eaiser
to extend _si_fault in the future as this reduces the number of
special cases. In particular with si_trapno included in the union it
is no longer a concern that the union must be pointer aligned on most
architectures because the union follows immediately after si_addr
which is a pointer.
This change results in a difference in siginfo field placement on
sparc and alpha for the fields si_addr_lsb, si_lower, si_upper,
si_pkey, and si_perf. These architectures do not implement the
signals that would use si_addr_lsb, si_lower, si_upper, si_pkey, and
si_perf. Further these architecture have not yet implemented the
userspace that would use si_perf.
The point of this change is in fact to correct these placement issues
before sparc or alpha grow userspace that cares. This change was
discussed[1] and the agreement is that this change is currently safe.
Arnd Bergmann [Fri, 14 May 2021 14:00:08 +0000 (16:00 +0200)]
kcsan: Fix debugfs initcall return type
clang with CONFIG_LTO_CLANG points out that an initcall function should
return an 'int' due to the changes made to the initcall macros in commit 3578ad11f3fb ("init: lto: fix PREL32 relocations"):
kernel/kcsan/debugfs.c:274:15: error: returning 'void' from a function with incompatible result type 'int'
late_initcall(kcsan_debugfs_init);
~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
include/linux/init.h:292:46: note: expanded from macro 'late_initcall'
#define late_initcall(fn) __define_initcall(fn, 7)
Shay Drory [Tue, 11 May 2021 05:48:28 +0000 (08:48 +0300)]
RDMA/core: Don't access cm_id after its destruction
restrack should only be attached to a cm_id while the ID has a valid
device pointer. It is set up when the device is first loaded, but not
cleared when the device is removed. There is also two copies of the device
pointer, one private and one in the public API, and these were left out of
sync.
Make everything go to NULL together and manipulate restrack right around
the device assignments.
Found by syzcaller:
BUG: KASAN: wild-memory-access in __list_del include/linux/list.h:112 [inline]
BUG: KASAN: wild-memory-access in __list_del_entry include/linux/list.h:135 [inline]
BUG: KASAN: wild-memory-access in list_del include/linux/list.h:146 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783
Write of size 8 at addr dead000000000108 by task syz-executor716/334
Zqiang [Mon, 17 May 2021 03:40:05 +0000 (11:40 +0800)]
locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
When a interruptible mutex locker is interrupted by a signal
without acquiring this lock and removed from the wait queue.
if the mutex isn't contended enough to have a waiter
put into the wait queue again, the setting of the WAITER
bit will force mutex locker to go into the slowpath to
acquire the lock every time, so if the wait queue is empty,
the WAITER bit need to be clear.
Leo Yan [Wed, 12 May 2021 12:09:37 +0000 (20:09 +0800)]
locking/lockdep: Correct calling tracepoints
The commit eb1f00237aca ("lockdep,trace: Expose tracepoints") reverses
tracepoints for lock_contended() and lock_acquired(), thus the ftrace
log shows the wrong locking sequence that "acquired" event is prior to
"contended" event:
Like Xu [Fri, 30 Apr 2021 05:22:47 +0000 (13:22 +0800)]
perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
If the kernel is compiled with the CONFIG_LOCKDEP option, the conditional
might_sleep_if() deep in kmem_cache_alloc() will generate the following
trace, and potentially cause a deadlock when another LBR event is added:
[] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:196
[] Call Trace:
[] kmem_cache_alloc+0x36/0x250
[] intel_pmu_lbr_add+0x152/0x170
[] x86_pmu_add+0x83/0xd0
Make it symmetric with the release_lbr_buffers() call and mirror the
existing DS buffers.
Like Xu [Fri, 30 Apr 2021 05:22:46 +0000 (13:22 +0800)]
perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
The Architecture LBR does not have MSR_LBR_TOS (0x000001c9).
In a guest that should support Architecture LBR, check_msr()
will be a non-related check for the architecture MSR 0x0
(IA32_P5_MC_ADDR) that is also not supported by KVM.
The failure will cause x86_pmu.lbr_nr = 0, thereby preventing
the initialization of the guest Arch LBR. Fix it by avoiding
this extraneous check in intel_pmu_init() for Arch LBR.
Takashi Sakamoto [Tue, 18 May 2021 01:26:12 +0000 (10:26 +0900)]
ALSA: dice: fix stream format for TC Electronic Konnekt Live at high sampling transfer frequency
At high sampling transfer frequency, TC Electronic Konnekt Live
transfers/receives 6 audio data frames in multi bit linear audio data
channel of data block in CIP payload. Current hard-coded stream format
is wrong.
Although many DICE-based devices have a quirk at high sampling transfer
frequency to multiplex double number of PCM frames into data block than
the number in IEC 61883-1/6, the above devices are just compliant to
IEC 61883-1/6.
This commit disables the mode of double_pcm_frames for the models.
Tom Lendacky [Mon, 17 May 2021 17:42:33 +0000 (12:42 -0500)]
x86/sev-es: Invalidate the GHCB after completing VMGEXIT
Since the VMGEXIT instruction can be issued from userspace, invalidate
the GHCB after performing VMGEXIT processing in the kernel.
Invalidation is only required after userspace is available, so call
vc_ghcb_invalidate() from sev_es_put_ghcb(). Update vc_ghcb_invalidate()
to additionally clear the GHCB exit code so that it is always presented
as 0 when VMGEXIT has been issued by anything else besides the kernel.
Tom Lendacky [Mon, 17 May 2021 17:42:32 +0000 (12:42 -0500)]
x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
Move the location of sev_es_put_ghcb() in preparation for an update to it
in a follow-on patch. This will better highlight the changes being made
to the function.
Rob Herring [Mon, 10 May 2021 20:45:24 +0000 (15:45 -0500)]
dt-bindings: More removals of type references on common properties
Users of common properties shouldn't have a type definition as the
common schemas already have one. A few new ones slipped in and
*-names was missed in the last clean-up pass. Drop all the unnecessary
type references in the tree.
Rob Herring [Mon, 10 May 2021 20:35:14 +0000 (15:35 -0500)]
dt-bindings: media: renesas,drif: Use graph schema
Convert the renesas,drif binding schema to use the graph schema. The
binding referred to video-interfaces.txt, but it doesn't actually use any
properties from it as 'sync-active' is a custom property. As 'sync-active'
is custom, it needs a type definition.
Thomas Gleixner [Mon, 17 May 2021 17:57:47 +0000 (19:57 +0200)]
Merge tag 'irqchip-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix PXA Mainstone CPLD irq allocation in legacy mode
- Restrict the Apple AIC controller to the Apple platform
- Remove a few supperfluous messages on devm_ioremap_resource() failure
Linus Torvalds [Mon, 17 May 2021 16:55:10 +0000 (09:55 -0700)]
Merge tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes:
- fix fiemap to print extents that could get misreported due to
internal extent splitting and logical merging for fiemap output
- fix RCU stalls during delayed iputs
- fix removed dentries still existing after log is synced"
* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix removed dentries still existing after log is synced
btrfs: return whole extents in fiemap
btrfs: avoid RCU stalls while running delayed iputs
btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error
projects / linux.git / log