Pull "ARM: global cleanups" from Arnd Bergmann:
"Quite a bit of code gets removed, and some stuff moved around, mostly
the old samsung s3c24xx stuff. There should be no functional changes
in this series otherwise. Some cleanups have dependencies on other
arm-soc branches and will be sent in the second round.
Signed-off-by: Arnd Bergmann <[email protected]>"
Fixed up trivial conflicts mainly due to #include's being changes on
both sides.
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
ep93xx: Remove unnecessary includes of ep93xx-regs.h
ep93xx: Move EP93XX_SYSCON defines to SoC private header
ep93xx: Move crunch code to mach-ep93xx directory
ep93xx: Make syscon access functions private to SoC
ep93xx: Configure GPIO ports in core code
ep93xx: Move peripheral defines to local SoC header
ep93xx: Convert the watchdog driver into a platform device.
ep93xx: Use ioremap for backlight driver
ep93xx: Move GPIO defines to gpio-ep93xx.h
ep93xx: Don't use system controller defines in audio drivers
ep93xx: Move PHYS_BASE defines to local SoC header file
ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
PM / devfreq: update the name of EXYNOS clock registers that were omitted
PM / devfreq: update the name of EXYNOS clock register
ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
ARM: EXYNOS: use static declaration on regarding clock
ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
ARM: OMAP2+: Fix build error after merge
ARM: S3C24XX: remove call to s3c24xx_setup_clocks
...
convert to using pci_scan_root_bus() so they can supply a list of
bus resources when the bus is created.
- What: The CAP9 SoC family will be removed
- When: 3.4
- Files: arch/arm/mach-at91/at91cap9.c
- arch/arm/mach-at91/at91cap9_devices.c
- arch/arm/mach-at91/include/mach/at91cap9.h
- arch/arm/mach-at91/include/mach/at91cap9_matrix.h
- arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
- arch/arm/mach-at91/board-cap9adk.c
- Why: The code is not actively maintained and platforms are now hard to find.
-
- ----------------------------
-
+
+----------------------------
+
+What: Low Performance USB Block driver ("CONFIG_BLK_DEV_UB")
+When: 3.6
+Why: This driver provides support for USB storage devices like "USB
+ sticks". As of now, it is deactivated in Debian, Fedora and
+ Ubuntu. All current users can switch over to usb-storage
+ (CONFIG_USB_STORAGE) which only drawback is the additional SCSI
+ stack.
+
+----------------------------
+
+What: kmap_atomic(page, km_type)
+When: 3.5
+Why: The old kmap_atomic() with two arguments is deprecated, we only
+ keep it for backward compatibility for few cycles and then drop it.
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
+#include <linux/omapfb.h>
+ #include <linux/io.h>
#include <media/soc_camera.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
+#include <linux/omapfb.h>
- #include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
+#include <linux/omapfb.h>
- #include <mach/hardware.h>
-
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
+#include <linux/omapfb.h>
- #include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
- #include "common.h"
-#include <plat/hwa742.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
#include <plat/clock.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/smc91x.h>
-
+#include <linux/omapfb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
+#include <linux/omapfb.h>
- #include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
+#include <linux/omapfb.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
- #include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/omapfb.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
- #include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
+#include <linux/omapfb.h>
- #include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/i2c.h>
#include <linux/errno.h>
#include <linux/export.h>
+#include <linux/omapfb.h>
- #include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/mmc.h>
#include <plat/omap7xx.h>
-#include <plat/mcbsp.h>
+ #include <mach/camera.h>
+ #include <mach/hardware.h>
+
+ #include "common.h"
#include "clock.h"
/*-------------------------------------------------------------------------*/
#include <asm/mach/map.h>
#include <asm/pmu.h>
- #include <plat/tc.h>
+ #include "iomap.h"
#include <plat/board.h>
-#include <plat/mcbsp.h>
#include <plat/mmc.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/clk.h>
-#include <linux/omapfb.h>
#include <asm/tlb.h>
-
#include <asm/mach/map.h>
#include <plat/sram.h>
--- /dev/null
- printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
+ /* linux/arch/arm/plat-s3c24xx/pm-simtec.c
+ *
+ * Copyright 2004 Simtec Electronics
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * Power Management helpers for Simtec S3C24XX implementations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ #include <linux/kernel.h>
+ #include <linux/types.h>
+ #include <linux/interrupt.h>
+ #include <linux/list.h>
+ #include <linux/timer.h>
+ #include <linux/init.h>
+ #include <linux/device.h>
+ #include <linux/io.h>
+
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+
+ #include <mach/hardware.h>
+
+ #include <mach/map.h>
+ #include <mach/regs-gpio.h>
+ #include <mach/regs-mem.h>
+
+ #include <asm/mach-types.h>
+
+ #include <plat/pm.h>
+
+ #define COPYRIGHT ", Copyright 2005 Simtec Electronics"
+
+ /* pm_simtec_init
+ *
+ * enable the power management functions
+ */
+
+ static __init int pm_simtec_init(void)
+ {
+ unsigned long gstatus4;
+
+ /* check which machine we are running on */
+
+ if (!machine_is_bast() && !machine_is_vr1000() &&
+ !machine_is_anubis() && !machine_is_osiris() &&
+ !machine_is_aml_m5900())
+ return 0;
+
++ printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n");
+
+ gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
+ gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
+ gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
+
+ __raw_writel(gstatus4, S3C2410_GSTATUS4);
+
+ return s3c_pm_init();
+ }
+
+ arch_initcall(pm_simtec_init);
To compile this driver as a module, choose M here: the
module will be called fujitsu-ts.
+config TOUCHSCREEN_ILI210X
+ tristate "Ilitek ILI210X based touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have a ILI210X based touchscreen
+ controller. This driver supports models ILI2102,
+ ILI2102s, ILI2103, ILI2103s and ILI2105.
+ Such kind of chipsets can be found in Amazon Kindle Fire
+ touchscreens.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ili210x.
+
config TOUCHSCREEN_S3C2410
tristate "Samsung S3C2410/generic touchscreen input driver"
- depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
+ depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
select S3C_ADC
help
Say Y here if you have the s3c2410 touchscreen.
config SPI_PXA2XX_PCI
def_bool SPI_PXA2XX && X86_32 && PCI
+config SPI_RSPI
+ tristate "Renesas RSPI controller"
+ depends on SUPERH
+ help
+ SPI driver for Renesas RSPI blocks.
+
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C2410 && EXPERIMENTAL
+ depends on ARCH_S3C24XX && EXPERIMENTAL
select SPI_BITBANG
help
SPI driver for Samsung S3C24XX series ARM SoCs
projects / linux.git / commitdiff