drm/i915 feature pull for v6.8:
Features and functionality:
- Major DP MST improvements on bandwidth management, DSC (Imre, Stan, Ville)
- DP panel replay enabling (Animesh, Jouni)
- MTL C20 phy state verification (Mika)
- MTL DP DSC fractional bpp support (Ankit, Vandita, Swati, Imre)
- Audio fastset support (Ville)
Refactoring and cleanups:
- Use dma fence interfaces instead of i915_sw_fence (Jouni)
- Separate gem and display code (Jouni, Juha-Pekka)
- AUX register macro refactoring (Jani)
- Separate display module/device parameters from the rest (Jouni)
- Move display capabilities debugfs under display (Vinod)
- Makefile cleanup (Jani)
- Register cleanups (Ville)
- Enginer iterator cleanups (Tvrtko)
- Move display lock inits under display/ (Jani)
- VLV/CHV DPIO PHY register and interface refactoring (Jani)
- DSI VBT sequence refactoring (Jani, Andy Shevchenko)
- C10/C20 PHY PLL hardware readout and calculation abstractions (Lucas)
- DPLL code cleanups (Ville)
- Cleanup PXP plane protection checks (Jani)
Fixes:
- Replace VLV/CHV DSI GPIO direct access with proper GPIO API usage (Andy Shevchenko)
- Fix VLV/CHV DSI GPIO wrong initial value (Hans de Goede)
- Fix UHBR data, link M/N/TU and PBN values (Imre)
- Fix HDCP state on an enable/disable cycle (Suraj)
- Fix DP MST modeset sequence to be according to spec (Ville)
- Improved atomicity for multi-pipe commits (Ville)
- Update URLs in i915 MAINTAINERS entry and code (Jani)
- Check for VGA converter presence in eDP probe (Ville)
- Fix surface size checks (Ville)
- Fix LNL port/phy assignment (Lucas)
- Reset C10/C20 message bus harder to avoid sporadic failures (Mika)
- Fix bogus VBT HDMI level shift on BDW (Ville)
- Add workaround for LNL underruns when enabling FBC (Vinod)
- DSB refactoring (Animesh)
- DPT refactoring (Juha-Pekka)
- Disable DSC on DP MST on ICL (Imre)
- Fix PSR VSC packet setup timing (Mika)
- Fix LUT rounding and conversions (Ville)
DRM core display changes:
- DP MST fixes, helpers, refactoring to support bandwidth management (Imre)
- DP MST PBN divider value refactoring and fixes (Imre)
- DPCD register definitions (Ankit, Imre)
- Add helper to get DSC bpp precision (Ankit)
- Fix color LUT rounding (Ville)
From: Jani Nikula <
[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
[sima: Some conflicts in the amdgpu dp mst code]
Signed-off-by: Daniel Vetter <[email protected]>
#include <drm/drm_atomic_uapi.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_blend.h>
+ #include <drm/drm_fixed.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_edid.h>
+#include <drm/drm_eld.h>
#include <drm/drm_vblank.h>
#include <drm/drm_audio_component.h>
#include <drm/drm_gem_atomic_helper.h>
struct drm_dp_mst_atomic_payload *new_payload,
struct drm_dp_mst_atomic_payload *old_payload)
{
- struct link_mst_stream_allocation_table current_link_table =
- link->mst_stream_alloc_table;
- struct link_mst_stream_allocation *dc_alloc;
- int pbn_per_slot = dfixed_trunc(pbn_per_slot_fp);
- int i;
+ struct drm_dp_mst_atomic_payload *pos;
- int pbn_per_slot = mst_state->pbn_div;
++ int pbn_per_slot = dfixed_trunc(mst_state->pbn_div);
+ u8 next_payload_vc_start = mgr->next_start_slot;
+ u8 payload_vc_start = new_payload->vc_start_slot;
+ u8 allocated_time_slots;
*old_payload = *new_payload;
} else {
/* check if mode could be supported within full_pbn */
bpp = convert_dc_color_depth_into_bpc(stream->timing.display_color_depth) * 3;
- pbn = drm_dp_calc_pbn_mode(stream->timing.pix_clk_100hz / 10, bpp, false);
+ pbn = drm_dp_calc_pbn_mode(stream->timing.pix_clk_100hz / 10, bpp << 4);
-
- if (pbn > aconnector->mst_output_port->full_pbn)
+ if (pbn > full_pbn)
return DC_FAIL_BANDWIDTH_VALIDATE;
}
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_edid.h>
+#include <drm/drm_eld.h>
#include <drm/drm_fb_helper.h>
+ #include <drm/drm_fixed.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_vblank.h>