]> Git Repo - linux.git/blob - drivers/leds/trigger/ledtrig-gpio.c
mptcp: ensure snd_nxt is properly initialized on connect
[linux.git] / drivers / leds / trigger / ledtrig-gpio.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * ledtrig-gio.c - LED Trigger Based on GPIO events
4  *
5  * Copyright 2009 Felipe Balbi <[email protected]>
6  * Copyright 2023 Linus Walleij <[email protected]>
7  */
8
9 #include <linux/module.h>
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/gpio/consumer.h>
13 #include <linux/interrupt.h>
14 #include <linux/leds.h>
15 #include <linux/slab.h>
16 #include "../leds.h"
17
18 struct gpio_trig_data {
19         struct led_classdev *led;
20         unsigned desired_brightness;    /* desired brightness when led is on */
21         struct gpio_desc *gpiod;        /* gpio that triggers the led */
22 };
23
24 static irqreturn_t gpio_trig_irq(int irq, void *_led)
25 {
26         struct led_classdev *led = _led;
27         struct gpio_trig_data *gpio_data = led_get_trigger_data(led);
28         int tmp;
29
30         tmp = gpiod_get_value_cansleep(gpio_data->gpiod);
31         if (tmp) {
32                 if (gpio_data->desired_brightness)
33                         led_set_brightness_nosleep(gpio_data->led,
34                                            gpio_data->desired_brightness);
35                 else
36                         led_set_brightness_nosleep(gpio_data->led, LED_FULL);
37         } else {
38                 led_set_brightness_nosleep(gpio_data->led, LED_OFF);
39         }
40
41         return IRQ_HANDLED;
42 }
43
44 static ssize_t desired_brightness_show(struct device *dev,
45                 struct device_attribute *attr, char *buf)
46 {
47         struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
48
49         return sysfs_emit(buf, "%u\n", gpio_data->desired_brightness);
50 }
51
52 static ssize_t desired_brightness_store(struct device *dev,
53                 struct device_attribute *attr, const char *buf, size_t n)
54 {
55         struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
56         u8 desired_brightness;
57         int ret;
58
59         ret = kstrtou8(buf, 10, &desired_brightness);
60         if (ret)
61                 return ret;
62
63         gpio_data->desired_brightness = desired_brightness;
64
65         return n;
66 }
67 static DEVICE_ATTR_RW(desired_brightness);
68
69 static struct attribute *gpio_trig_attrs[] = {
70         &dev_attr_desired_brightness.attr,
71         NULL
72 };
73 ATTRIBUTE_GROUPS(gpio_trig);
74
75 static int gpio_trig_activate(struct led_classdev *led)
76 {
77         struct gpio_trig_data *gpio_data;
78         struct device *dev = led->dev;
79         int ret;
80
81         gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL);
82         if (!gpio_data)
83                 return -ENOMEM;
84
85         /*
86          * The generic property "trigger-sources" is followed,
87          * and we hope that this is a GPIO.
88          */
89         gpio_data->gpiod = gpiod_get_optional(dev, "trigger-sources", GPIOD_IN);
90         if (IS_ERR(gpio_data->gpiod)) {
91                 ret = PTR_ERR(gpio_data->gpiod);
92                 kfree(gpio_data);
93                 return ret;
94         }
95         if (!gpio_data->gpiod) {
96                 dev_err(dev, "no valid GPIO for the trigger\n");
97                 kfree(gpio_data);
98                 return -EINVAL;
99         }
100
101         gpiod_set_consumer_name(gpio_data->gpiod, "led-trigger");
102
103         gpio_data->led = led;
104         led_set_trigger_data(led, gpio_data);
105
106         ret = request_threaded_irq(gpiod_to_irq(gpio_data->gpiod), NULL, gpio_trig_irq,
107                         IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_RISING
108                         | IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
109         if (ret) {
110                 dev_err(dev, "request_irq failed with error %d\n", ret);
111                 gpiod_put(gpio_data->gpiod);
112                 kfree(gpio_data);
113                 return ret;
114         }
115
116         /* Finally update the LED to initial status */
117         gpio_trig_irq(0, led);
118
119         return 0;
120 }
121
122 static void gpio_trig_deactivate(struct led_classdev *led)
123 {
124         struct gpio_trig_data *gpio_data = led_get_trigger_data(led);
125
126         free_irq(gpiod_to_irq(gpio_data->gpiod), led);
127         gpiod_put(gpio_data->gpiod);
128         kfree(gpio_data);
129 }
130
131 static struct led_trigger gpio_led_trigger = {
132         .name           = "gpio",
133         .activate       = gpio_trig_activate,
134         .deactivate     = gpio_trig_deactivate,
135         .groups         = gpio_trig_groups,
136 };
137 module_led_trigger(gpio_led_trigger);
138
139 MODULE_AUTHOR("Felipe Balbi <[email protected]>");
140 MODULE_DESCRIPTION("GPIO LED trigger");
141 MODULE_LICENSE("GPL v2");
This page took 0.050778 seconds and 4 git commands to generate.