arch/arm64/boot/dts/qcom/sc8180x.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
   4  * Copyright (c) 2020-2023, Linaro Limited
   5  */
   6
   7 #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
   8 #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
   9 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
  10 #include <dt-bindings/clock/qcom,rpmh.h>
  11 #include <dt-bindings/interconnect/qcom,icc.h>
  12 #include <dt-bindings/interconnect/qcom,osm-l3.h>
  13 #include <dt-bindings/interconnect/qcom,sc8180x.h>
  14 #include <dt-bindings/interrupt-controller/arm-gic.h>
  15 #include <dt-bindings/power/qcom-rpmpd.h>
  16 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
  17 #include <dt-bindings/thermal/thermal.h>
  18
  19 / {
  20         interrupt-parent = <&intc>;
  21
  22         #address-cells = <2>;
  23         #size-cells = <2>;
  24
  25         clocks {
  26                 xo_board_clk: xo-board {
  27                         compatible = "fixed-clock";
  28                         #clock-cells = <0>;
  29                         clock-frequency = <38400000>;
  30                 };
  31
  32                 sleep_clk: sleep-clk {
  33                         compatible = "fixed-clock";
  34                         #clock-cells = <0>;
  35                         clock-frequency = <32764>;
  36                         clock-output-names = "sleep_clk";
  37                 };
  38         };
  39
  40         cpus {
  41                 #address-cells = <2>;
  42                 #size-cells = <0>;
  43
  44                 CPU0: cpu@0 {
  45                         device_type = "cpu";
  46                         compatible = "qcom,kryo485";
  47                         reg = <0x0 0x0>;
  48                         enable-method = "psci";
  49                         capacity-dmips-mhz = <602>;
  50                         next-level-cache = <&L2_0>;
  51                         qcom,freq-domain = <&cpufreq_hw 0>;
  52                         operating-points-v2 = <&cpu0_opp_table>;
  53                         interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
  54                                         <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
  55                         power-domains = <&CPU_PD0>;
  56                         power-domain-names = "psci";
  57                         #cooling-cells = <2>;
  58                         clocks = <&cpufreq_hw 0>;
  59
  60                         L2_0: l2-cache {
  61                                 compatible = "cache";
  62                                 cache-level = <2>;
  63                                 cache-unified;
  64                                 next-level-cache = <&L3_0>;
  65                                 L3_0: l3-cache {
  66                                         compatible = "cache";
  67                                         cache-level = <3>;
  68                                         cache-unified;
  69                                 };
  70                         };
  71                 };
  72
  73                 CPU1: cpu@100 {
  74                         device_type = "cpu";
  75                         compatible = "qcom,kryo485";
  76                         reg = <0x0 0x100>;
  77                         enable-method = "psci";
  78                         capacity-dmips-mhz = <602>;
  79                         next-level-cache = <&L2_100>;
  80                         qcom,freq-domain = <&cpufreq_hw 0>;
  81                         operating-points-v2 = <&cpu0_opp_table>;
  82                         interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
  83                                         <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
  84                         power-domains = <&CPU_PD1>;
  85                         power-domain-names = "psci";
  86                         #cooling-cells = <2>;
  87                         clocks = <&cpufreq_hw 0>;
  88
  89                         L2_100: l2-cache {
  90                                 compatible = "cache";
  91                                 cache-level = <2>;
  92                                 cache-unified;
  93                                 next-level-cache = <&L3_0>;
  94                         };
  95
  96                 };
  97
  98                 CPU2: cpu@200 {
  99                         device_type = "cpu";
 100                         compatible = "qcom,kryo485";
 101                         reg = <0x0 0x200>;
 102                         enable-method = "psci";
 103                         capacity-dmips-mhz = <602>;
 104                         next-level-cache = <&L2_200>;
 105                         qcom,freq-domain = <&cpufreq_hw 0>;
 106                         operating-points-v2 = <&cpu0_opp_table>;
 107                         interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 108                                         <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 109                         power-domains = <&CPU_PD2>;
 110                         power-domain-names = "psci";
 111                         #cooling-cells = <2>;
 112                         clocks = <&cpufreq_hw 0>;
 113
 114                         L2_200: l2-cache {
 115                                 compatible = "cache";
 116                                 cache-level = <2>;
 117                                 cache-unified;
 118                                 next-level-cache = <&L3_0>;
 119                         };
 120                 };
 121
 122                 CPU3: cpu@300 {
 123                         device_type = "cpu";
 124                         compatible = "qcom,kryo485";
 125                         reg = <0x0 0x300>;
 126                         enable-method = "psci";
 127                         capacity-dmips-mhz = <602>;
 128                         next-level-cache = <&L2_300>;
 129                         qcom,freq-domain = <&cpufreq_hw 0>;
 130                         operating-points-v2 = <&cpu0_opp_table>;
 131                         interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 132                                         <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 133                         power-domains = <&CPU_PD3>;
 134                         power-domain-names = "psci";
 135                         #cooling-cells = <2>;
 136                         clocks = <&cpufreq_hw 0>;
 137
 138                         L2_300: l2-cache {
 139                                 compatible = "cache";
 140                                 cache-unified;
 141                                 cache-level = <2>;
 142                                 next-level-cache = <&L3_0>;
 143                         };
 144                 };
 145
 146                 CPU4: cpu@400 {
 147                         device_type = "cpu";
 148                         compatible = "qcom,kryo485";
 149                         reg = <0x0 0x400>;
 150                         enable-method = "psci";
 151                         capacity-dmips-mhz = <1024>;
 152                         next-level-cache = <&L2_400>;
 153                         qcom,freq-domain = <&cpufreq_hw 1>;
 154                         operating-points-v2 = <&cpu4_opp_table>;
 155                         interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 156                                         <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 157                         power-domains = <&CPU_PD4>;
 158                         power-domain-names = "psci";
 159                         #cooling-cells = <2>;
 160                         clocks = <&cpufreq_hw 1>;
 161
 162                         L2_400: l2-cache {
 163                                 compatible = "cache";
 164                                 cache-unified;
 165                                 cache-level = <2>;
 166                                 next-level-cache = <&L3_0>;
 167                         };
 168                 };
 169
 170                 CPU5: cpu@500 {
 171                         device_type = "cpu";
 172                         compatible = "qcom,kryo485";
 173                         reg = <0x0 0x500>;
 174                         enable-method = "psci";
 175                         capacity-dmips-mhz = <1024>;
 176                         next-level-cache = <&L2_500>;
 177                         qcom,freq-domain = <&cpufreq_hw 1>;
 178                         operating-points-v2 = <&cpu4_opp_table>;
 179                         interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 180                                         <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 181                         power-domains = <&CPU_PD5>;
 182                         power-domain-names = "psci";
 183                         #cooling-cells = <2>;
 184                         clocks = <&cpufreq_hw 1>;
 185
 186                         L2_500: l2-cache {
 187                                 compatible = "cache";
 188                                 cache-unified;
 189                                 cache-level = <2>;
 190                                 next-level-cache = <&L3_0>;
 191                         };
 192                 };
 193
 194                 CPU6: cpu@600 {
 195                         device_type = "cpu";
 196                         compatible = "qcom,kryo485";
 197                         reg = <0x0 0x600>;
 198                         enable-method = "psci";
 199                         capacity-dmips-mhz = <1024>;
 200                         next-level-cache = <&L2_600>;
 201                         qcom,freq-domain = <&cpufreq_hw 1>;
 202                         operating-points-v2 = <&cpu4_opp_table>;
 203                         interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 204                                         <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 205                         power-domains = <&CPU_PD6>;
 206                         power-domain-names = "psci";
 207                         #cooling-cells = <2>;
 208                         clocks = <&cpufreq_hw 1>;
 209
 210                         L2_600: l2-cache {
 211                                 compatible = "cache";
 212                                 cache-unified;
 213                                 cache-level = <2>;
 214                                 next-level-cache = <&L3_0>;
 215                         };
 216                 };
 217
 218                 CPU7: cpu@700 {
 219                         device_type = "cpu";
 220                         compatible = "qcom,kryo485";
 221                         reg = <0x0 0x700>;
 222                         enable-method = "psci";
 223                         capacity-dmips-mhz = <1024>;
 224                         next-level-cache = <&L2_700>;
 225                         qcom,freq-domain = <&cpufreq_hw 1>;
 226                         operating-points-v2 = <&cpu4_opp_table>;
 227                         interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 228                                         <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 229                         power-domains = <&CPU_PD7>;
 230                         power-domain-names = "psci";
 231                         #cooling-cells = <2>;
 232                         clocks = <&cpufreq_hw 1>;
 233
 234                         L2_700: l2-cache {
 235                                 compatible = "cache";
 236                                 cache-unified;
 237                                 cache-level = <2>;
 238                                 next-level-cache = <&L3_0>;
 239                         };
 240                 };
 241
 242                 cpu-map {
 243                         cluster0 {
 244                                 core0 {
 245                                         cpu = <&CPU0>;
 246                                 };
 247
 248                                 core1 {
 249                                         cpu = <&CPU1>;
 250                                 };
 251
 252                                 core2 {
 253                                         cpu = <&CPU2>;
 254                                 };
 255
 256                                 core3 {
 257                                         cpu = <&CPU3>;
 258                                 };
 259
 260                                 core4 {
 261                                         cpu = <&CPU4>;
 262                                 };
 263
 264                                 core5 {
 265                                         cpu = <&CPU5>;
 266                                 };
 267
 268                                 core6 {
 269                                         cpu = <&CPU6>;
 270                                 };
 271
 272                                 core7 {
 273                                         cpu = <&CPU7>;
 274                                 };
 275                         };
 276                 };
 277
 278                 idle-states {
 279                         entry-method = "psci";
 280
 281                         LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
 282                                 compatible = "arm,idle-state";
 283                                 arm,psci-suspend-param = <0x40000004>;
 284                                 entry-latency-us = <355>;
 285                                 exit-latency-us = <909>;
 286                                 min-residency-us = <3934>;
 287                                 local-timer-stop;
 288                         };
 289
 290                         BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 291                                 compatible = "arm,idle-state";
 292                                 arm,psci-suspend-param = <0x40000004>;
 293                                 entry-latency-us = <2411>;
 294                                 exit-latency-us = <1461>;
 295                                 min-residency-us = <4488>;
 296                                 local-timer-stop;
 297                         };
 298                 };
 299
 300                 domain-idle-states {
 301                         CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 {
 302                                 compatible = "domain-idle-state";
 303                                 arm,psci-suspend-param = <0x41000044>;
 304                                 entry-latency-us = <3300>;
 305                                 exit-latency-us = <3300>;
 306                                 min-residency-us = <6000>;
 307                         };
 308
 309                         CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 {
 310                                 compatible = "domain-idle-state";
 311                                 arm,psci-suspend-param = <0x4100a344>;
 312                                 entry-latency-us = <3263>;
 313                                 exit-latency-us = <6562>;
 314                                 min-residency-us = <9987>;
 315                         };
 316                 };
 317         };
 318
 319         cpu0_opp_table: opp-table-cpu0 {
 320                 compatible = "operating-points-v2";
 321                 opp-shared;
 322
 323                 opp-300000000 {
 324                         opp-hz = /bits/ 64 <300000000>;
 325                         opp-peak-kBps = <800000 9600000>;
 326                 };
 327
 328                 opp-422400000 {
 329                         opp-hz = /bits/ 64 <422400000>;
 330                         opp-peak-kBps = <800000 9600000>;
 331                 };
 332
 333                 opp-537600000 {
 334                         opp-hz = /bits/ 64 <537600000>;
 335                         opp-peak-kBps = <800000 12902400>;
 336                 };
 337
 338                 opp-652800000 {
 339                         opp-hz = /bits/ 64 <652800000>;
 340                         opp-peak-kBps = <800000 12902400>;
 341                 };
 342
 343                 opp-768000000 {
 344                         opp-hz = /bits/ 64 <768000000>;
 345                         opp-peak-kBps = <800000 15974400>;
 346                 };
 347
 348                 opp-883200000 {
 349                         opp-hz = /bits/ 64 <883200000>;
 350                         opp-peak-kBps = <1804000 19660800>;
 351                 };
 352
 353                 opp-998400000 {
 354                         opp-hz = /bits/ 64 <998400000>;
 355                         opp-peak-kBps = <1804000 19660800>;
 356                 };
 357
 358                 opp-1113600000 {
 359                         opp-hz = /bits/ 64 <1113600000>;
 360                         opp-peak-kBps = <1804000 22732800>;
 361                 };
 362
 363                 opp-1228800000 {
 364                         opp-hz = /bits/ 64 <1228800000>;
 365                         opp-peak-kBps = <1804000 22732800>;
 366                 };
 367
 368                 opp-1363200000 {
 369                         opp-hz = /bits/ 64 <1363200000>;
 370                         opp-peak-kBps = <2188000 25804800>;
 371                 };
 372
 373                 opp-1478400000 {
 374                         opp-hz = /bits/ 64 <1478400000>;
 375                         opp-peak-kBps = <2188000 31948800>;
 376                 };
 377
 378                 opp-1574400000 {
 379                         opp-hz = /bits/ 64 <1574400000>;
 380                         opp-peak-kBps = <3072000 31948800>;
 381                 };
 382
 383                 opp-1670400000 {
 384                         opp-hz = /bits/ 64 <1670400000>;
 385                         opp-peak-kBps = <3072000 31948800>;
 386                 };
 387
 388                 opp-1766400000 {
 389                         opp-hz = /bits/ 64 <1766400000>;
 390                         opp-peak-kBps = <3072000 31948800>;
 391                 };
 392         };
 393
 394         cpu4_opp_table: opp-table-cpu4 {
 395                 compatible = "operating-points-v2";
 396                 opp-shared;
 397
 398                 opp-825600000 {
 399                         opp-hz = /bits/ 64 <825600000>;
 400                         opp-peak-kBps = <1804000 15974400>;
 401                 };
 402
 403                 opp-940800000 {
 404                         opp-hz = /bits/ 64 <940800000>;
 405                         opp-peak-kBps = <2188000 19660800>;
 406                 };
 407
 408                 opp-1056000000 {
 409                         opp-hz = /bits/ 64 <1056000000>;
 410                         opp-peak-kBps = <2188000 22732800>;
 411                 };
 412
 413                 opp-1171200000 {
 414                         opp-hz = /bits/ 64 <1171200000>;
 415                         opp-peak-kBps = <3072000 25804800>;
 416                 };
 417
 418                 opp-1286400000 {
 419                         opp-hz = /bits/ 64 <1286400000>;
 420                         opp-peak-kBps = <3072000 31948800>;
 421                 };
 422
 423                 opp-1420800000 {
 424                         opp-hz = /bits/ 64 <1420800000>;
 425                         opp-peak-kBps = <4068000 31948800>;
 426                 };
 427
 428                 opp-1536000000 {
 429                         opp-hz = /bits/ 64 <1536000000>;
 430                         opp-peak-kBps = <4068000 31948800>;
 431                 };
 432
 433                 opp-1651200000 {
 434                         opp-hz = /bits/ 64 <1651200000>;
 435                         opp-peak-kBps = <4068000 40550400>;
 436                 };
 437
 438                 opp-1766400000 {
 439                         opp-hz = /bits/ 64 <1766400000>;
 440                         opp-peak-kBps = <4068000 40550400>;
 441                 };
 442
 443                 opp-1881600000 {
 444                         opp-hz = /bits/ 64 <1881600000>;
 445                         opp-peak-kBps = <4068000 43008000>;
 446                 };
 447
 448                 opp-1996800000 {
 449                         opp-hz = /bits/ 64 <1996800000>;
 450                         opp-peak-kBps = <6220000 43008000>;
 451                 };
 452
 453                 opp-2131200000 {
 454                         opp-hz = /bits/ 64 <2131200000>;
 455                         opp-peak-kBps = <6220000 49152000>;
 456                 };
 457
 458                 opp-2246400000 {
 459                         opp-hz = /bits/ 64 <2246400000>;
 460                         opp-peak-kBps = <7216000 49152000>;
 461                 };
 462
 463                 opp-2361600000 {
 464                         opp-hz = /bits/ 64 <2361600000>;
 465                         opp-peak-kBps = <8368000 49152000>;
 466                 };
 467
 468                 opp-2457600000 {
 469                         opp-hz = /bits/ 64 <2457600000>;
 470                         opp-peak-kBps = <8368000 51609600>;
 471                 };
 472
 473                 opp-2553600000 {
 474                         opp-hz = /bits/ 64 <2553600000>;
 475                         opp-peak-kBps = <8368000 51609600>;
 476                 };
 477
 478                 opp-2649600000 {
 479                         opp-hz = /bits/ 64 <2649600000>;
 480                         opp-peak-kBps = <8368000 51609600>;
 481                 };
 482
 483                 opp-2745600000 {
 484                         opp-hz = /bits/ 64 <2745600000>;
 485                         opp-peak-kBps = <8368000 51609600>;
 486                 };
 487
 488                 opp-2841600000 {
 489                         opp-hz = /bits/ 64 <2841600000>;
 490                         opp-peak-kBps = <8368000 51609600>;
 491                 };
 492
 493                 opp-2918400000 {
 494                         opp-hz = /bits/ 64 <2918400000>;
 495                         opp-peak-kBps = <8368000 51609600>;
 496                 };
 497
 498                 opp-2995200000 {
 499                         opp-hz = /bits/ 64 <2995200000>;
 500                         opp-peak-kBps = <8368000 51609600>;
 501                 };
 502         };
 503
 504         firmware {
 505                 scm: scm {
 506                         compatible = "qcom,scm-sc8180x", "qcom,scm";
 507                 };
 508         };
 509
 510         camnoc_virt: interconnect-camnoc-virt {
 511                 compatible = "qcom,sc8180x-camnoc-virt";
 512                 #interconnect-cells = <2>;
 513                 qcom,bcm-voters = <&apps_bcm_voter>;
 514         };
 515
 516         mc_virt: interconnect-mc-virt {
 517                 compatible = "qcom,sc8180x-mc-virt";
 518                 #interconnect-cells = <2>;
 519                 qcom,bcm-voters = <&apps_bcm_voter>;
 520         };
 521
 522         qup_virt: interconnect-qup-virt {
 523                 compatible = "qcom,sc8180x-qup-virt";
 524                 #interconnect-cells = <2>;
 525                 qcom,bcm-voters = <&apps_bcm_voter>;
 526         };
 527
 528         memory@80000000 {
 529                 device_type = "memory";
 530                 /* We expect the bootloader to fill in the size */
 531                 reg = <0x0 0x80000000 0x0 0x0>;
 532         };
 533
 534         pmu {
 535                 compatible = "arm,armv8-pmuv3";
 536                 interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
 537         };
 538
 539         psci {
 540                 compatible = "arm,psci-1.0";
 541                 method = "smc";
 542
 543                 CPU_PD0: power-domain-cpu0 {
 544                         #power-domain-cells = <0>;
 545                         power-domains = <&CLUSTER_PD>;
 546                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
 547                 };
 548
 549                 CPU_PD1: power-domain-cpu1 {
 550                         #power-domain-cells = <0>;
 551                         power-domains = <&CLUSTER_PD>;
 552                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
 553                 };
 554
 555                 CPU_PD2: power-domain-cpu2 {
 556                         #power-domain-cells = <0>;
 557                         power-domains = <&CLUSTER_PD>;
 558                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
 559                 };
 560
 561                 CPU_PD3: power-domain-cpu3 {
 562                         #power-domain-cells = <0>;
 563                         power-domains = <&CLUSTER_PD>;
 564                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
 565                 };
 566
 567                 CPU_PD4: power-domain-cpu4 {
 568                         #power-domain-cells = <0>;
 569                         power-domains = <&CLUSTER_PD>;
 570                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
 571                 };
 572
 573                 CPU_PD5: power-domain-cpu5 {
 574                         #power-domain-cells = <0>;
 575                         power-domains = <&CLUSTER_PD>;
 576                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
 577                 };
 578
 579                 CPU_PD6: power-domain-cpu6 {
 580                         #power-domain-cells = <0>;
 581                         power-domains = <&CLUSTER_PD>;
 582                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
 583                 };
 584
 585                 CPU_PD7: power-domain-cpu7 {
 586                         #power-domain-cells = <0>;
 587                         power-domains = <&CLUSTER_PD>;
 588                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
 589                 };
 590
 591                 CLUSTER_PD: power-domain-cpu-cluster0 {
 592                         #power-domain-cells = <0>;
 593                         domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>;
 594                 };
 595         };
 596
 597         reserved-memory {
 598                 #address-cells = <2>;
 599                 #size-cells = <2>;
 600                 ranges;
 601
 602                 hyp_mem: hyp@85700000 {
 603                         reg = <0x0 0x85700000 0x0 0x600000>;
 604                         no-map;
 605                 };
 606
 607                 xbl_mem: xbl@85d00000 {
 608                         reg = <0x0 0x85d00000 0x0 0x140000>;
 609                         no-map;
 610                 };
 611
 612                 aop_mem: aop@85f00000 {
 613                         reg = <0x0 0x85f00000 0x0 0x20000>;
 614                         no-map;
 615                 };
 616
 617                 aop_cmd_db: cmd-db@85f20000 {
 618                         compatible = "qcom,cmd-db";
 619                         reg = <0x0 0x85f20000 0x0 0x20000>;
 620                         no-map;
 621                 };
 622
 623                 reserved@85f40000 {
 624                         reg = <0x0 0x85f40000 0x0 0x10000>;
 625                         no-map;
 626                 };
 627
 628                 smem_mem: smem@86000000 {
 629                         compatible = "qcom,smem";
 630                         reg = <0x0 0x86000000 0x0 0x200000>;
 631                         no-map;
 632                         hwlocks = <&tcsr_mutex 3>;
 633                 };
 634
 635                 reserved@86200000 {
 636                         reg = <0x0 0x86200000 0x0 0x3900000>;
 637                         no-map;
 638                 };
 639
 640                 reserved@89b00000 {
 641                         reg = <0x0 0x89b00000 0x0 0x1c00000>;
 642                         no-map;
 643                 };
 644
 645                 reserved@9d400000 {
 646                         reg = <0x0 0x9d400000 0x0 0x1000000>;
 647                         no-map;
 648                 };
 649
 650                 reserved@9e400000 {
 651                         reg = <0x0 0x9e400000 0x0 0x1400000>;
 652                         no-map;
 653                 };
 654
 655                 reserved@9f800000 {
 656                         reg = <0x0 0x9f800000 0x0 0x800000>;
 657                         no-map;
 658                 };
 659         };
 660
 661         smp2p-cdsp {
 662                 compatible = "qcom,smp2p";
 663                 qcom,smem = <94>, <432>;
 664
 665                 interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
 666
 667                 mboxes = <&apss_shared 6>;
 668
 669                 qcom,local-pid = <0>;
 670                 qcom,remote-pid = <5>;
 671
 672                 cdsp_smp2p_out: master-kernel {
 673                         qcom,entry-name = "master-kernel";
 674                         #qcom,smem-state-cells = <1>;
 675                 };
 676
 677                 cdsp_smp2p_in: slave-kernel {
 678                         qcom,entry-name = "slave-kernel";
 679
 680                         interrupt-controller;
 681                         #interrupt-cells = <2>;
 682                 };
 683         };
 684
 685         smp2p-lpass {
 686                 compatible = "qcom,smp2p";
 687                 qcom,smem = <443>, <429>;
 688
 689                 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
 690
 691                 mboxes = <&apss_shared 10>;
 692
 693                 qcom,local-pid = <0>;
 694                 qcom,remote-pid = <2>;
 695
 696                 adsp_smp2p_out: master-kernel {
 697                         qcom,entry-name = "master-kernel";
 698                         #qcom,smem-state-cells = <1>;
 699                 };
 700
 701                 adsp_smp2p_in: slave-kernel {
 702                         qcom,entry-name = "slave-kernel";
 703
 704                         interrupt-controller;
 705                         #interrupt-cells = <2>;
 706                 };
 707         };
 708
 709         smp2p-mpss {
 710                 compatible = "qcom,smp2p";
 711                 qcom,smem = <435>, <428>;
 712
 713                 interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
 714
 715                 mboxes = <&apss_shared 14>;
 716
 717                 qcom,local-pid = <0>;
 718                 qcom,remote-pid = <1>;
 719
 720                 modem_smp2p_out: master-kernel {
 721                         qcom,entry-name = "master-kernel";
 722                         #qcom,smem-state-cells = <1>;
 723                 };
 724
 725                 modem_smp2p_in: slave-kernel {
 726                         qcom,entry-name = "slave-kernel";
 727
 728                         interrupt-controller;
 729                         #interrupt-cells = <2>;
 730                 };
 731
 732                 modem_smp2p_ipa_out: ipa-ap-to-modem {
 733                         qcom,entry-name = "ipa";
 734                         #qcom,smem-state-cells = <1>;
 735                 };
 736
 737                 modem_smp2p_ipa_in: ipa-modem-to-ap {
 738                         qcom,entry-name = "ipa";
 739                         interrupt-controller;
 740                         #interrupt-cells = <2>;
 741                 };
 742
 743                 modem_smp2p_wlan_in: wlan-wpss-to-ap {
 744                         qcom,entry-name = "wlan";
 745                         interrupt-controller;
 746                         #interrupt-cells = <2>;
 747                 };
 748         };
 749
 750         smp2p-slpi {
 751                 compatible = "qcom,smp2p";
 752                 qcom,smem = <481>, <430>;
 753
 754                 interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
 755
 756                 mboxes = <&apss_shared 26>;
 757
 758                 qcom,local-pid = <0>;
 759                 qcom,remote-pid = <3>;
 760
 761                 slpi_smp2p_out: master-kernel {
 762                         qcom,entry-name = "master-kernel";
 763                         #qcom,smem-state-cells = <1>;
 764                 };
 765
 766                 slpi_smp2p_in: slave-kernel {
 767                         qcom,entry-name = "slave-kernel";
 768
 769                         interrupt-controller;
 770                         #interrupt-cells = <2>;
 771                 };
 772         };
 773
 774         soc: soc@0 {
 775                 compatible = "simple-bus";
 776                 #address-cells = <2>;
 777                 #size-cells = <2>;
 778                 ranges = <0 0 0 0 0x10 0>;
 779                 dma-ranges = <0 0 0 0 0x10 0>;
 780
 781                 gcc: clock-controller@100000 {
 782                         compatible = "qcom,gcc-sc8180x";
 783                         reg = <0x0 0x00100000 0x0 0x1f0000>;
 784                         #clock-cells = <1>;
 785                         #reset-cells = <1>;
 786                         #power-domain-cells = <1>;
 787                         clocks = <&rpmhcc RPMH_CXO_CLK>,
 788                                  <&rpmhcc RPMH_CXO_CLK_A>,
 789                                  <&sleep_clk>;
 790                         clock-names = "bi_tcxo",
 791                                       "bi_tcxo_ao",
 792                                       "sleep_clk";
 793                         power-domains = <&rpmhpd SC8180X_CX>;
 794                 };
 795
 796                 qupv3_id_0: geniqup@8c0000 {
 797                         compatible = "qcom,geni-se-qup";
 798                         reg = <0 0x008c0000 0 0x6000>;
 799                         clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
 800                                  <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
 801                         clock-names = "m-ahb", "s-ahb";
 802                         #address-cells = <2>;
 803                         #size-cells = <2>;
 804                         ranges;
 805                         iommus = <&apps_smmu 0x4c3 0>;
 806                         status = "disabled";
 807
 808                         i2c0: i2c@880000 {
 809                                 compatible = "qcom,geni-i2c";
 810                                 reg = <0 0x00880000 0 0x4000>;
 811                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 812                                 clock-names = "se";
 813                                 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 814                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 815                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 816                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
 817                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
 818                                 #address-cells = <1>;
 819                                 #size-cells = <0>;
 820                                 status = "disabled";
 821                         };
 822
 823                         spi0: spi@880000 {
 824                                 compatible = "qcom,geni-spi";
 825                                 reg = <0 0x00880000 0 0x4000>;
 826                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 827                                 clock-names = "se";
 828                                 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 829                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 830                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 831                                 interconnect-names = "qup-core", "qup-config";
 832                                 #address-cells = <1>;
 833                                 #size-cells = <0>;
 834                                 status = "disabled";
 835                         };
 836
 837                         uart0: serial@880000 {
 838                                 compatible = "qcom,geni-uart";
 839                                 reg = <0 0x00880000 0 0x4000>;
 840                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 841                                 clock-names = "se";
 842                                 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 843                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 844                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 845                                 interconnect-names = "qup-core", "qup-config";
 846                                 status = "disabled";
 847                         };
 848
 849                         i2c1: i2c@884000 {
 850                                 compatible = "qcom,geni-i2c";
 851                                 reg = <0 0x00884000 0 0x4000>;
 852                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 853                                 clock-names = "se";
 854                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 855                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 856                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 857                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
 858                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
 859                                 #address-cells = <1>;
 860                                 #size-cells = <0>;
 861                                 status = "disabled";
 862                         };
 863
 864                         spi1: spi@884000 {
 865                                 compatible = "qcom,geni-spi";
 866                                 reg = <0 0x00884000 0 0x4000>;
 867                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 868                                 clock-names = "se";
 869                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 870                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 871                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 872                                 interconnect-names = "qup-core", "qup-config";
 873                                 #address-cells = <1>;
 874                                 #size-cells = <0>;
 875                                 status = "disabled";
 876                         };
 877
 878                         uart1: serial@884000 {
 879                                 compatible = "qcom,geni-uart";
 880                                 reg = <0 0x00884000 0 0x4000>;
 881                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 882                                 clock-names = "se";
 883                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 884                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 885                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 886                                 interconnect-names = "qup-core", "qup-config";
 887                                 status = "disabled";
 888                         };
 889
 890                         i2c2: i2c@888000 {
 891                                 compatible = "qcom,geni-i2c";
 892                                 reg = <0 0x00888000 0 0x4000>;
 893                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 894                                 clock-names = "se";
 895                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 896                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 897                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 898                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
 899                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
 900                                 #address-cells = <1>;
 901                                 #size-cells = <0>;
 902                                 status = "disabled";
 903                         };
 904
 905                         spi2: spi@888000 {
 906                                 compatible = "qcom,geni-spi";
 907                                 reg = <0 0x00888000 0 0x4000>;
 908                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 909                                 clock-names = "se";
 910                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 911                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 912                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 913                                 interconnect-names = "qup-core", "qup-config";
 914                                 #address-cells = <1>;
 915                                 #size-cells = <0>;
 916                                 status = "disabled";
 917                         };
 918
 919                         uart2: serial@888000 {
 920                                 compatible = "qcom,geni-uart";
 921                                 reg = <0 0x00888000 0 0x4000>;
 922                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 923                                 clock-names = "se";
 924                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 925                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 926                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 927                                 interconnect-names = "qup-core", "qup-config";
 928                                 status = "disabled";
 929                         };
 930
 931                         i2c3: i2c@88c000 {
 932                                 compatible = "qcom,geni-i2c";
 933                                 reg = <0 0x0088c000 0 0x4000>;
 934                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 935                                 clock-names = "se";
 936                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 937                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 938                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 939                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
 940                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
 941                                 #address-cells = <1>;
 942                                 #size-cells = <0>;
 943                                 status = "disabled";
 944                         };
 945
 946                         spi3: spi@88c000 {
 947                                 compatible = "qcom,geni-spi";
 948                                 reg = <0 0x0088c000 0 0x4000>;
 949                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 950                                 clock-names = "se";
 951                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 952                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 953                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 954                                 interconnect-names = "qup-core", "qup-config";
 955                                 #address-cells = <1>;
 956                                 #size-cells = <0>;
 957                                 status = "disabled";
 958                         };
 959
 960                         uart3: serial@88c000 {
 961                                 compatible = "qcom,geni-uart";
 962                                 reg = <0 0x0088c000 0 0x4000>;
 963                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 964                                 clock-names = "se";
 965                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 966                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 967                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 968                                 interconnect-names = "qup-core", "qup-config";
 969                                 status = "disabled";
 970                         };
 971
 972                         i2c4: i2c@890000 {
 973                                 compatible = "qcom,geni-i2c";
 974                                 reg = <0 0x00890000 0 0x4000>;
 975                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 976                                 clock-names = "se";
 977                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 978                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 979                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 980                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
 981                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
 982                                 #address-cells = <1>;
 983                                 #size-cells = <0>;
 984                                 status = "disabled";
 985                         };
 986
 987                         spi4: spi@890000 {
 988                                 compatible = "qcom,geni-spi";
 989                                 reg = <0 0x00890000 0 0x4000>;
 990                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 991                                 clock-names = "se";
 992                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 993                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 994                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 995                                 interconnect-names = "qup-core", "qup-config";
 996                                 #address-cells = <1>;
 997                                 #size-cells = <0>;
 998                                 status = "disabled";
 999                         };
1000
1001                         uart4: serial@890000 {
1002                                 compatible = "qcom,geni-uart";
1003                                 reg = <0 0x00890000 0 0x4000>;
1004                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1005                                 clock-names = "se";
1006                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1007                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1008                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
1009                                 interconnect-names = "qup-core", "qup-config";
1010                                 status = "disabled";
1011                         };
1012
1013                         i2c5: i2c@894000 {
1014                                 compatible = "qcom,geni-i2c";
1015                                 reg = <0 0x00894000 0 0x4000>;
1016                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1017                                 clock-names = "se";
1018                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1019                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1020                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
1021                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
1022                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1023                                 #address-cells = <1>;
1024                                 #size-cells = <0>;
1025                                 status = "disabled";
1026                         };
1027
1028                         spi5: spi@894000 {
1029                                 compatible = "qcom,geni-spi";
1030                                 reg = <0 0x00894000 0 0x4000>;
1031                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1032                                 clock-names = "se";
1033                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1034                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1035                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
1036                                 interconnect-names = "qup-core", "qup-config";
1037                                 #address-cells = <1>;
1038                                 #size-cells = <0>;
1039                                 status = "disabled";
1040                         };
1041
1042                         uart5: serial@894000 {
1043                                 compatible = "qcom,geni-uart";
1044                                 reg = <0 0x00894000 0 0x4000>;
1045                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1046                                 clock-names = "se";
1047                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1048                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1049                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
1050                                 interconnect-names = "qup-core", "qup-config";
1051                                 status = "disabled";
1052                         };
1053
1054                         i2c6: i2c@898000 {
1055                                 compatible = "qcom,geni-i2c";
1056                                 reg = <0 0x00898000 0 0x4000>;
1057                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1058                                 clock-names = "se";
1059                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1060                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1061                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
1062                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
1063                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1064                                 #address-cells = <1>;
1065                                 #size-cells = <0>;
1066                                 status = "disabled";
1067                         };
1068
1069                         spi6: spi@898000 {
1070                                 compatible = "qcom,geni-spi";
1071                                 reg = <0 0x00898000 0 0x4000>;
1072                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1073                                 clock-names = "se";
1074                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1075                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1076                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
1077                                 interconnect-names = "qup-core", "qup-config";
1078                                 #address-cells = <1>;
1079                                 #size-cells = <0>;
1080                                 status = "disabled";
1081                         };
1082
1083                         uart6: serial@898000 {
1084                                 compatible = "qcom,geni-uart";
1085                                 reg = <0 0x00898000 0 0x4000>;
1086                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1087                                 clock-names = "se";
1088                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1089                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1090                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
1091                                 interconnect-names = "qup-core", "qup-config";
1092                                 status = "disabled";
1093                         };
1094
1095                         i2c7: i2c@89c000 {
1096                                 compatible = "qcom,geni-i2c";
1097                                 reg = <0 0x0089c000 0 0x4000>;
1098                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1099                                 clock-names = "se";
1100                                 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1101                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1102                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
1103                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
1104                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1105                                 #address-cells = <1>;
1106                                 #size-cells = <0>;
1107                                 status = "disabled";
1108                         };
1109
1110                         spi7: spi@89c000 {
1111                                 compatible = "qcom,geni-spi";
1112                                 reg = <0 0x0089c000 0 0x4000>;
1113                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1114                                 clock-names = "se";
1115                                 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1116                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1117                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
1118                                 interconnect-names = "qup-core", "qup-config";
1119                                 #address-cells = <1>;
1120                                 #size-cells = <0>;
1121                                 status = "disabled";
1122                         };
1123
1124                         uart7: serial@89c000 {
1125                                 compatible = "qcom,geni-uart";
1126                                 reg = <0 0x0089c000 0 0x4000>;
1127                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1128                                 clock-names = "se";
1129                                 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1130                                 interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
1131                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
1132                                 interconnect-names = "qup-core", "qup-config";
1133                                 status = "disabled";
1134                         };
1135                 };
1136
1137                 qupv3_id_1: geniqup@ac0000 {
1138                         compatible = "qcom,geni-se-qup";
1139                         reg = <0x0 0x00ac0000 0x0 0x6000>;
1140                         clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1141                                  <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1142                         clock-names = "m-ahb", "s-ahb";
1143                         #address-cells = <2>;
1144                         #size-cells = <2>;
1145                         ranges;
1146                         iommus = <&apps_smmu 0x603 0>;
1147                         status = "disabled";
1148
1149                         i2c8: i2c@a80000 {
1150                                 compatible = "qcom,geni-i2c";
1151                                 reg = <0 0x00a80000 0 0x4000>;
1152                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1153                                 clock-names = "se";
1154                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1155                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1156                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
1157                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
1158                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1159                                 #address-cells = <1>;
1160                                 #size-cells = <0>;
1161                                 status = "disabled";
1162                         };
1163
1164                         spi8: spi@a80000 {
1165                                 compatible = "qcom,geni-spi";
1166                                 reg = <0 0x00a80000 0 0x4000>;
1167                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1168                                 clock-names = "se";
1169                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1170                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1171                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1172                                 interconnect-names = "qup-core", "qup-config";
1173                                 #address-cells = <1>;
1174                                 #size-cells = <0>;
1175                                 status = "disabled";
1176                         };
1177
1178                         uart8: serial@a80000 {
1179                                 compatible = "qcom,geni-uart";
1180                                 reg = <0 0x00a80000 0 0x4000>;
1181                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1182                                 clock-names = "se";
1183                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1184                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1185                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1186                                 interconnect-names = "qup-core", "qup-config";
1187                                 status = "disabled";
1188                         };
1189
1190                         i2c9: i2c@a84000 {
1191                                 compatible = "qcom,geni-i2c";
1192                                 reg = <0 0x00a84000 0 0x4000>;
1193                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1194                                 clock-names = "se";
1195                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1196                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1197                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
1198                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
1199                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1200                                 #address-cells = <1>;
1201                                 #size-cells = <0>;
1202                                 status = "disabled";
1203                         };
1204
1205                         spi9: spi@a84000 {
1206                                 compatible = "qcom,geni-spi";
1207                                 reg = <0 0x00a84000 0 0x4000>;
1208                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1209                                 clock-names = "se";
1210                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1211                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1212                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1213                                 interconnect-names = "qup-core", "qup-config";
1214                                 #address-cells = <1>;
1215                                 #size-cells = <0>;
1216                                 status = "disabled";
1217                         };
1218
1219                         uart9: serial@a84000 {
1220                                 compatible = "qcom,geni-debug-uart";
1221                                 reg = <0 0x00a84000 0 0x4000>;
1222                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1223                                 clock-names = "se";
1224                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1225                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1226                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1227                                 interconnect-names = "qup-core", "qup-config";
1228                                 status = "disabled";
1229                         };
1230
1231                         i2c10: i2c@a88000 {
1232                                 compatible = "qcom,geni-i2c";
1233                                 reg = <0 0x00a88000 0 0x4000>;
1234                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1235                                 clock-names = "se";
1236                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1237                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1238                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
1239                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
1240                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1241                                 #address-cells = <1>;
1242                                 #size-cells = <0>;
1243                                 status = "disabled";
1244                         };
1245
1246                         spi10: spi@a88000 {
1247                                 compatible = "qcom,geni-spi";
1248                                 reg = <0 0x00a88000 0 0x4000>;
1249                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1250                                 clock-names = "se";
1251                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1252                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1253                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1254                                 interconnect-names = "qup-core", "qup-config";
1255                                 #address-cells = <1>;
1256                                 #size-cells = <0>;
1257                                 status = "disabled";
1258                         };
1259
1260                         uart10: serial@a88000 {
1261                                 compatible = "qcom,geni-uart";
1262                                 reg = <0 0x00a88000 0 0x4000>;
1263                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1264                                 clock-names = "se";
1265                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1266                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1267                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1268                                 interconnect-names = "qup-core", "qup-config";
1269                                 status = "disabled";
1270                         };
1271
1272                         i2c11: i2c@a8c000 {
1273                                 compatible = "qcom,geni-i2c";
1274                                 reg = <0 0x00a8c000 0 0x4000>;
1275                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1276                                 clock-names = "se";
1277                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1278                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1279                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
1280                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
1281                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1282                                 #address-cells = <1>;
1283                                 #size-cells = <0>;
1284                                 status = "disabled";
1285                         };
1286
1287                         spi11: spi@a8c000 {
1288                                 compatible = "qcom,geni-spi";
1289                                 reg = <0 0x00a8c000 0 0x4000>;
1290                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1291                                 clock-names = "se";
1292                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1293                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1294                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1295                                 interconnect-names = "qup-core", "qup-config";
1296                                 #address-cells = <1>;
1297                                 #size-cells = <0>;
1298                                 status = "disabled";
1299                         };
1300
1301                         uart11: serial@a8c000 {
1302                                 compatible = "qcom,geni-uart";
1303                                 reg = <0 0x00a8c000 0 0x4000>;
1304                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1305                                 clock-names = "se";
1306                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1307                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1308                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1309                                 interconnect-names = "qup-core", "qup-config";
1310                                 status = "disabled";
1311                         };
1312
1313                         i2c12: i2c@a90000 {
1314                                 compatible = "qcom,geni-i2c";
1315                                 reg = <0 0x00a90000 0 0x4000>;
1316                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1317                                 clock-names = "se";
1318                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1319                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1320                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
1321                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
1322                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1323                                 #address-cells = <1>;
1324                                 #size-cells = <0>;
1325                                 status = "disabled";
1326                         };
1327
1328                         spi12: spi@a90000 {
1329                                 compatible = "qcom,geni-spi";
1330                                 reg = <0 0x00a90000 0 0x4000>;
1331                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1332                                 clock-names = "se";
1333                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1334                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1335                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1336                                 interconnect-names = "qup-core", "qup-config";
1337                                 #address-cells = <1>;
1338                                 #size-cells = <0>;
1339                                 status = "disabled";
1340                         };
1341
1342                         uart12: serial@a90000 {
1343                                 compatible = "qcom,geni-uart";
1344                                 reg = <0 0x00a90000 0 0x4000>;
1345                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1346                                 clock-names = "se";
1347                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1348                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1349                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1350                                 interconnect-names = "qup-core", "qup-config";
1351                                 status = "disabled";
1352                         };
1353
1354                         i2c16: i2c@a94000 {
1355                                 compatible = "qcom,geni-i2c";
1356                                 reg = <0 0x00a94000 0 0x4000>;
1357                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1358                                 clock-names = "se";
1359                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1360                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1361                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
1362                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
1363                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1364                                 #address-cells = <1>;
1365                                 #size-cells = <0>;
1366                                 status = "disabled";
1367                         };
1368
1369                         spi16: spi@a94000 {
1370                                 compatible = "qcom,geni-spi";
1371                                 reg = <0 0x00a94000 0 0x4000>;
1372                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1373                                 clock-names = "se";
1374                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1375                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1376                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1377                                 interconnect-names = "qup-core", "qup-config";
1378                                 #address-cells = <1>;
1379                                 #size-cells = <0>;
1380                                 status = "disabled";
1381                         };
1382
1383                         uart16: serial@a94000 {
1384                                 compatible = "qcom,geni-uart";
1385                                 reg = <0 0x00a94000 0 0x4000>;
1386                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1387                                 clock-names = "se";
1388                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1389                                 interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
1390                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
1391                                 interconnect-names = "qup-core", "qup-config";
1392                                 status = "disabled";
1393                         };
1394                 };
1395
1396                 qupv3_id_2: geniqup@cc0000 {
1397                         compatible = "qcom,geni-se-qup";
1398                         reg = <0x0 0x00cc0000 0x0 0x6000>;
1399                         clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
1400                                  <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
1401                         clock-names = "m-ahb", "s-ahb";
1402                         #address-cells = <2>;
1403                         #size-cells = <2>;
1404                         ranges;
1405                         iommus = <&apps_smmu 0x7a3 0>;
1406                         status = "disabled";
1407
1408                         i2c17: i2c@c80000 {
1409                                 compatible = "qcom,geni-i2c";
1410                                 reg = <0 0x00c80000 0 0x4000>;
1411                                 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
1412                                 clock-names = "se";
1413                                 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
1414                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1415                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
1416                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
1417                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1418                                 #address-cells = <1>;
1419                                 #size-cells = <0>;
1420                                 status = "disabled";
1421                         };
1422
1423                         spi17: spi@c80000 {
1424                                 compatible = "qcom,geni-spi";
1425                                 reg = <0 0x00c80000 0 0x4000>;
1426                                 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
1427                                 clock-names = "se";
1428                                 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
1429                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1430                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1431                                 interconnect-names = "qup-core", "qup-config";
1432                                 #address-cells = <1>;
1433                                 #size-cells = <0>;
1434                                 status = "disabled";
1435                         };
1436
1437                         uart17: serial@c80000 {
1438                                 compatible = "qcom,geni-uart";
1439                                 reg = <0 0x00c80000 0 0x4000>;
1440                                 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
1441                                 clock-names = "se";
1442                                 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
1443                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1444                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1445                                 interconnect-names = "qup-core", "qup-config";
1446                                 status = "disabled";
1447                         };
1448
1449                         i2c18: i2c@c84000 {
1450                                 compatible = "qcom,geni-i2c";
1451                                 reg = <0 0x00c84000 0 0x4000>;
1452                                 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
1453                                 clock-names = "se";
1454                                 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
1455                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1456                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
1457                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
1458                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1459                                 #address-cells = <1>;
1460                                 #size-cells = <0>;
1461                                 status = "disabled";
1462                         };
1463
1464                         spi18: spi@c84000 {
1465                                 compatible = "qcom,geni-spi";
1466                                 reg = <0 0x00c84000 0 0x4000>;
1467                                 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
1468                                 clock-names = "se";
1469                                 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
1470                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1471                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1472                                 interconnect-names = "qup-core", "qup-config";
1473                                 #address-cells = <1>;
1474                                 #size-cells = <0>;
1475                                 status = "disabled";
1476                         };
1477
1478                         uart18: serial@c84000 {
1479                                 compatible = "qcom,geni-uart";
1480                                 reg = <0 0x00c84000 0 0x4000>;
1481                                 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
1482                                 clock-names = "se";
1483                                 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
1484                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1485                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1486                                 interconnect-names = "qup-core", "qup-config";
1487                                 status = "disabled";
1488                         };
1489
1490                         i2c19: i2c@c88000 {
1491                                 compatible = "qcom,geni-i2c";
1492                                 reg = <0 0x00c88000 0 0x4000>;
1493                                 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
1494                                 clock-names = "se";
1495                                 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
1496                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1497                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
1498                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
1499                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1500                                 #address-cells = <1>;
1501                                 #size-cells = <0>;
1502                                 status = "disabled";
1503                         };
1504
1505                         spi19: spi@c88000 {
1506                                 compatible = "qcom,geni-spi";
1507                                 reg = <0 0x00c88000 0 0x4000>;
1508                                 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
1509                                 clock-names = "se";
1510                                 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
1511                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1512                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1513                                 interconnect-names = "qup-core", "qup-config";
1514                                 #address-cells = <1>;
1515                                 #size-cells = <0>;
1516                                 status = "disabled";
1517                         };
1518
1519                         uart19: serial@c88000 {
1520                                 compatible = "qcom,geni-uart";
1521                                 reg = <0 0x00c88000 0 0x4000>;
1522                                 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
1523                                 clock-names = "se";
1524                                 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
1525                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1526                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1527                                 interconnect-names = "qup-core", "qup-config";
1528                                 status = "disabled";
1529                         };
1530
1531                         i2c13: i2c@c8c000 {
1532                                 compatible = "qcom,geni-i2c";
1533                                 reg = <0 0x00c8c000 0 0x4000>;
1534                                 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1535                                 clock-names = "se";
1536                                 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1537                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1538                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
1539                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
1540                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1541                                 #address-cells = <1>;
1542                                 #size-cells = <0>;
1543                                 status = "disabled";
1544                         };
1545
1546                         spi13: spi@c8c000 {
1547                                 compatible = "qcom,geni-spi";
1548                                 reg = <0 0x00c8c000 0 0x4000>;
1549                                 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1550                                 clock-names = "se";
1551                                 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1552                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1553                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1554                                 interconnect-names = "qup-core", "qup-config";
1555                                 #address-cells = <1>;
1556                                 #size-cells = <0>;
1557                                 status = "disabled";
1558                         };
1559
1560                         uart13: serial@c8c000 {
1561                                 compatible = "qcom,geni-uart";
1562                                 reg = <0 0x00c8c000 0 0x4000>;
1563                                 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1564                                 clock-names = "se";
1565                                 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1566                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1567                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1568                                 interconnect-names = "qup-core", "qup-config";
1569                                 status = "disabled";
1570                         };
1571
1572                         i2c14: i2c@c90000 {
1573                                 compatible = "qcom,geni-i2c";
1574                                 reg = <0 0x00c90000 0 0x4000>;
1575                                 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1576                                 clock-names = "se";
1577                                 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1578                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1579                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
1580                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
1581                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1582                                 #address-cells = <1>;
1583                                 #size-cells = <0>;
1584                                 status = "disabled";
1585                         };
1586
1587                         spi14: spi@c90000 {
1588                                 compatible = "qcom,geni-spi";
1589                                 reg = <0 0x00c90000 0 0x4000>;
1590                                 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1591                                 clock-names = "se";
1592                                 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1593                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1594                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1595                                 interconnect-names = "qup-core", "qup-config";
1596                                 #address-cells = <1>;
1597                                 #size-cells = <0>;
1598                                 status = "disabled";
1599                         };
1600
1601                         uart14: serial@c90000 {
1602                                 compatible = "qcom,geni-uart";
1603                                 reg = <0 0x00c90000 0 0x4000>;
1604                                 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1605                                 clock-names = "se";
1606                                 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1607                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1608                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1609                                 interconnect-names = "qup-core", "qup-config";
1610                                 status = "disabled";
1611                         };
1612
1613                         i2c15: i2c@c94000 {
1614                                 compatible = "qcom,geni-i2c";
1615                                 reg = <0 0x00c94000 0 0x4000>;
1616                                 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1617                                 clock-names = "se";
1618                                 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1619                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1620                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
1621                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
1622                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1623                                 #address-cells = <1>;
1624                                 #size-cells = <0>;
1625                                 status = "disabled";
1626                         };
1627
1628                         spi15: spi@c94000 {
1629                                 compatible = "qcom,geni-spi";
1630                                 reg = <0 0x00c94000 0 0x4000>;
1631                                 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1632                                 clock-names = "se";
1633                                 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1634                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1635                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1636                                 interconnect-names = "qup-core", "qup-config";
1637                                 #address-cells = <1>;
1638                                 #size-cells = <0>;
1639                                 status = "disabled";
1640                         };
1641
1642                         uart15: serial@c94000 {
1643                                 compatible = "qcom,geni-uart";
1644                                 reg = <0 0x00c94000 0 0x4000>;
1645                                 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1646                                 clock-names = "se";
1647                                 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1648                                 interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
1649                                                 <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
1650                                 interconnect-names = "qup-core", "qup-config";
1651                                 status = "disabled";
1652                         };
1653                 };
1654
1655                 config_noc: interconnect@1500000 {
1656                         compatible = "qcom,sc8180x-config-noc";
1657                         reg = <0 0x01500000 0 0x7400>;
1658                         #interconnect-cells = <2>;
1659                         qcom,bcm-voters = <&apps_bcm_voter>;
1660                 };
1661
1662                 system_noc: interconnect@1620000 {
1663                         compatible = "qcom,sc8180x-system-noc";
1664                         reg = <0 0x01620000 0 0x19400>;
1665                         #interconnect-cells = <2>;
1666                         qcom,bcm-voters = <&apps_bcm_voter>;
1667                 };
1668
1669                 aggre1_noc: interconnect@16e0000 {
1670                         compatible = "qcom,sc8180x-aggre1-noc";
1671                         reg = <0 0x016e0000 0 0xd080>;
1672                         #interconnect-cells = <2>;
1673                         qcom,bcm-voters = <&apps_bcm_voter>;
1674                 };
1675
1676                 aggre2_noc: interconnect@1700000 {
1677                         compatible = "qcom,sc8180x-aggre2-noc";
1678                         reg = <0 0x01700000 0 0x20000>;
1679                         #interconnect-cells = <2>;
1680                         qcom,bcm-voters = <&apps_bcm_voter>;
1681                 };
1682
1683                 compute_noc: interconnect@1720000 {
1684                         compatible = "qcom,sc8180x-compute-noc";
1685                         reg = <0 0x01720000 0 0x7000>;
1686                         #interconnect-cells = <2>;
1687                         qcom,bcm-voters = <&apps_bcm_voter>;
1688                 };
1689
1690                 mmss_noc: interconnect@1740000 {
1691                         compatible = "qcom,sc8180x-mmss-noc";
1692                         reg = <0 0x01740000 0 0x1c100>;
1693                         #interconnect-cells = <2>;
1694                         qcom,bcm-voters = <&apps_bcm_voter>;
1695                 };
1696
1697                 pcie0: pcie@1c00000 {
1698                         compatible = "qcom,pcie-sc8180x";
1699                         reg = <0 0x01c00000 0 0x3000>,
1700                               <0 0x60000000 0 0xf1d>,
1701                               <0 0x60000f20 0 0xa8>,
1702                               <0 0x60001000 0 0x1000>,
1703                               <0 0x60100000 0 0x100000>;
1704                         reg-names = "parf",
1705                                     "dbi",
1706                                     "elbi",
1707                                     "atu",
1708                                     "config";
1709                         device_type = "pci";
1710                         linux,pci-domain = <0>;
1711                         bus-range = <0x00 0xff>;
1712                         num-lanes = <2>;
1713
1714                         #address-cells = <3>;
1715                         #size-cells = <2>;
1716
1717                         ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
1718                                  <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
1719
1720                         interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
1721                                      <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
1722                                      <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
1723                                      <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
1724                                      <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
1725                                      <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
1726                                      <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
1727                                      <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
1728                         interrupt-names = "msi0",
1729                                           "msi1",
1730                                           "msi2",
1731                                           "msi3",
1732                                           "msi4",
1733                                           "msi5",
1734                                           "msi6",
1735                                           "msi7";
1736                         #interrupt-cells = <1>;
1737                         interrupt-map-mask = <0 0 0 0x7>;
1738                         interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1739                                         <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1740                                         <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1741                                         <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1742
1743                         clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
1744                                  <&gcc GCC_PCIE_0_AUX_CLK>,
1745                                  <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1746                                  <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1747                                  <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
1748                                  <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
1749                                  <&gcc GCC_PCIE_0_CLKREF_CLK>,
1750                                  <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
1751                         clock-names = "pipe",
1752                                       "aux",
1753                                       "cfg",
1754                                       "bus_master",
1755                                       "bus_slave",
1756                                       "slave_q2a",
1757                                       "ref",
1758                                       "tbu";
1759
1760                         assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
1761                         assigned-clock-rates = <19200000>;
1762
1763                         iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
1764                                     <0x100 &apps_smmu 0x1d81 0x1>;
1765
1766                         resets = <&gcc GCC_PCIE_0_BCR>;
1767                         reset-names = "pci";
1768
1769                         power-domains = <&gcc PCIE_0_GDSC>;
1770
1771                         interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>,
1772                                         <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
1773                         interconnect-names = "pcie-mem", "cpu-pcie";
1774
1775                         phys = <&pcie0_phy>;
1776                         phy-names = "pciephy";
1777                         dma-coherent;
1778
1779                         status = "disabled";
1780                 };
1781
1782                 pcie0_phy: phy@1c06000 {
1783                         compatible = "qcom,sc8180x-qmp-pcie-phy";
1784                         reg = <0 0x01c06000 0 0x1000>;
1785                         clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
1786                                  <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1787                                  <&gcc GCC_PCIE_0_CLKREF_CLK>,
1788                                  <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
1789                                  <&gcc GCC_PCIE_0_PIPE_CLK>;
1790                         clock-names = "aux",
1791                                       "cfg_ahb",
1792                                       "ref",
1793                                       "refgen",
1794                                       "pipe";
1795                         #clock-cells = <0>;
1796                         clock-output-names = "pcie_0_pipe_clk";
1797                         #phy-cells = <0>;
1798
1799                         resets = <&gcc GCC_PCIE_0_PHY_BCR>;
1800                         reset-names = "phy";
1801
1802                         assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
1803                         assigned-clock-rates = <100000000>;
1804
1805                         status = "disabled";
1806                 };
1807
1808                 pcie3: pcie@1c08000 {
1809                         compatible = "qcom,pcie-sc8180x";
1810                         reg = <0 0x01c08000 0 0x3000>,
1811                               <0 0x40000000 0 0xf1d>,
1812                               <0 0x40000f20 0 0xa8>,
1813                               <0 0x40001000 0 0x1000>,
1814                               <0 0x40100000 0 0x100000>;
1815                         reg-names = "parf",
1816                                     "dbi",
1817                                     "elbi",
1818                                     "atu",
1819                                     "config";
1820                         device_type = "pci";
1821                         linux,pci-domain = <3>;
1822                         bus-range = <0x00 0xff>;
1823                         num-lanes = <2>;
1824
1825                         #address-cells = <3>;
1826                         #size-cells = <2>;
1827
1828                         ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
1829                                  <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
1830
1831                         interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
1832                                      <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
1833                                      <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
1834                                      <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
1835                                      <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
1836                                      <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
1837                                      <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
1838                                      <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
1839                         interrupt-names = "msi0",
1840                                           "msi1",
1841                                           "msi2",
1842                                           "msi3",
1843                                           "msi4",
1844                                           "msi5",
1845                                           "msi6",
1846                                           "msi7";
1847                         #interrupt-cells = <1>;
1848                         interrupt-map-mask = <0 0 0 0x7>;
1849                         interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1850                                         <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1851                                         <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1852                                         <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1853
1854                         clocks = <&gcc GCC_PCIE_3_PIPE_CLK>,
1855                                  <&gcc GCC_PCIE_3_AUX_CLK>,
1856                                  <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
1857                                  <&gcc GCC_PCIE_3_MSTR_AXI_CLK>,
1858                                  <&gcc GCC_PCIE_3_SLV_AXI_CLK>,
1859                                  <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>,
1860                                  <&gcc GCC_PCIE_3_CLKREF_CLK>,
1861                                  <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
1862                         clock-names = "pipe",
1863                                       "aux",
1864                                       "cfg",
1865                                       "bus_master",
1866                                       "bus_slave",
1867                                       "slave_q2a",
1868                                       "ref",
1869                                       "tbu";
1870
1871                         assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
1872                         assigned-clock-rates = <19200000>;
1873
1874                         iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
1875                                     <0x100 &apps_smmu 0x1e01 0x1>;
1876
1877                         resets = <&gcc GCC_PCIE_3_BCR>;
1878                         reset-names = "pci";
1879
1880                         power-domains = <&gcc PCIE_3_GDSC>;
1881
1882                         interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>,
1883                                         <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
1884                         interconnect-names = "pcie-mem", "cpu-pcie";
1885
1886                         phys = <&pcie3_phy>;
1887                         phy-names = "pciephy";
1888                         dma-coherent;
1889
1890                         status = "disabled";
1891                 };
1892
1893                 pcie3_phy: phy@1c0c000 {
1894                         compatible = "qcom,sc8180x-qmp-pcie-phy";
1895                         reg = <0 0x01c0c000 0 0x1000>;
1896                         clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
1897                                  <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
1898                                  <&gcc GCC_PCIE_3_CLKREF_CLK>,
1899                                  <&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
1900                                  <&gcc GCC_PCIE_3_PIPE_CLK>;
1901                         clock-names = "aux",
1902                                       "cfg_ahb",
1903                                       "ref",
1904                                       "refgen",
1905                                       "pipe";
1906                         #clock-cells = <0>;
1907                         clock-output-names = "pcie_3_pipe_clk";
1908
1909                         #phy-cells = <0>;
1910
1911                         resets = <&gcc GCC_PCIE_3_PHY_BCR>;
1912                         reset-names = "phy";
1913
1914                         assigned-clocks = <&gcc GCC_PCIE3_PHY_REFGEN_CLK>;
1915                         assigned-clock-rates = <100000000>;
1916
1917                         status = "disabled";
1918                 };
1919
1920                 pcie1: pcie@1c10000 {
1921                         compatible = "qcom,pcie-sc8180x";
1922                         reg = <0 0x01c10000 0 0x3000>,
1923                               <0 0x68000000 0 0xf1d>,
1924                               <0 0x68000f20 0 0xa8>,
1925                               <0 0x68001000 0 0x1000>,
1926                               <0 0x68100000 0 0x100000>;
1927                         reg-names = "parf",
1928                                     "dbi",
1929                                     "elbi",
1930                                     "atu",
1931                                     "config";
1932                         device_type = "pci";
1933                         linux,pci-domain = <1>;
1934                         bus-range = <0x00 0xff>;
1935                         num-lanes = <2>;
1936
1937                         #address-cells = <3>;
1938                         #size-cells = <2>;
1939
1940                         ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>,
1941                                  <0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>;
1942
1943                         interrupts = <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
1944                                      <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
1945                                      <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
1946                                      <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
1947                                      <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
1948                                      <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
1949                                      <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
1950                                      <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>;
1951                         interrupt-names = "msi0",
1952                                           "msi1",
1953                                           "msi2",
1954                                           "msi3",
1955                                           "msi4",
1956                                           "msi5",
1957                                           "msi6",
1958                                           "msi7";
1959                         #interrupt-cells = <1>;
1960                         interrupt-map-mask = <0 0 0 0x7>;
1961                         interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1962                                         <0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1963                                         <0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1964                                         <0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1965
1966                         clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
1967                                  <&gcc GCC_PCIE_1_AUX_CLK>,
1968                                  <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1969                                  <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1970                                  <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
1971                                  <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
1972                                  <&gcc GCC_PCIE_1_CLKREF_CLK>,
1973                                  <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
1974                         clock-names = "pipe",
1975                                       "aux",
1976                                       "cfg",
1977                                       "bus_master",
1978                                       "bus_slave",
1979                                       "slave_q2a",
1980                                       "ref",
1981                                       "tbu";
1982
1983                         assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
1984                         assigned-clock-rates = <19200000>;
1985
1986                         iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
1987                                     <0x100 &apps_smmu 0x1c81 0x1>;
1988
1989                         resets = <&gcc GCC_PCIE_1_BCR>;
1990                         reset-names = "pci";
1991
1992                         power-domains = <&gcc PCIE_1_GDSC>;
1993
1994                         interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>,
1995                                         <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
1996                         interconnect-names = "pcie-mem", "cpu-pcie";
1997
1998                         phys = <&pcie1_phy>;
1999                         phy-names = "pciephy";
2000                         dma-coherent;
2001
2002                         status = "disabled";
2003                 };
2004
2005                 pcie1_phy: phy@1c16000 {
2006                         compatible = "qcom,sc8180x-qmp-pcie-phy";
2007                         reg = <0 0x01c16000 0 0x1000>;
2008                         clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
2009                                  <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
2010                                  <&gcc GCC_PCIE_1_CLKREF_CLK>,
2011                                  <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
2012                                  <&gcc GCC_PCIE_1_PIPE_CLK>;
2013                         clock-names = "aux",
2014                                       "cfg_ahb",
2015                                       "ref",
2016                                       "refgen",
2017                                       "pipe";
2018                         #clock-cells = <0>;
2019                         clock-output-names = "pcie_1_pipe_clk";
2020
2021                         #phy-cells = <0>;
2022
2023                         resets = <&gcc GCC_PCIE_1_PHY_BCR>;
2024                         reset-names = "phy";
2025
2026                         assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
2027                         assigned-clock-rates = <100000000>;
2028
2029                         status = "disabled";
2030                 };
2031
2032                 pcie2: pcie@1c18000 {
2033                         compatible = "qcom,pcie-sc8180x";
2034                         reg = <0 0x01c18000 0 0x3000>,
2035                               <0 0x70000000 0 0xf1d>,
2036                               <0 0x70000f20 0 0xa8>,
2037                               <0 0x70001000 0 0x1000>,
2038                               <0 0x70100000 0 0x100000>;
2039                         reg-names = "parf",
2040                                     "dbi",
2041                                     "elbi",
2042                                     "atu",
2043                                     "config";
2044                         device_type = "pci";
2045                         linux,pci-domain = <2>;
2046                         bus-range = <0x00 0xff>;
2047                         num-lanes = <4>;
2048
2049                         #address-cells = <3>;
2050                         #size-cells = <2>;
2051
2052                         ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>,
2053                                  <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>;
2054
2055                         interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
2056                                      <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
2057                                      <GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>,
2058                                      <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
2059                                      <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
2060                                      <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>,
2061                                      <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
2062                                      <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>;
2063                         interrupt-names = "msi0",
2064                                           "msi1",
2065                                           "msi2",
2066                                           "msi3",
2067                                           "msi4",
2068                                           "msi5",
2069                                           "msi6",
2070                                           "msi7";
2071                         #interrupt-cells = <1>;
2072                         interrupt-map-mask = <0 0 0 0x7>;
2073                         interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
2074                                         <0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
2075                                         <0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
2076                                         <0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
2077
2078                         clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
2079                                  <&gcc GCC_PCIE_2_AUX_CLK>,
2080                                  <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
2081                                  <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
2082                                  <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
2083                                  <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
2084                                  <&gcc GCC_PCIE_2_CLKREF_CLK>,
2085                                  <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
2086                         clock-names = "pipe",
2087                                       "aux",
2088                                       "cfg",
2089                                       "bus_master",
2090                                       "bus_slave",
2091                                       "slave_q2a",
2092                                       "ref",
2093                                       "tbu";
2094
2095                         assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
2096                         assigned-clock-rates = <19200000>;
2097
2098                         iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
2099                                     <0x100 &apps_smmu 0x1d01 0x1>;
2100
2101                         resets = <&gcc GCC_PCIE_2_BCR>;
2102                         reset-names = "pci";
2103
2104                         power-domains = <&gcc PCIE_2_GDSC>;
2105
2106                         interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>,
2107                                         <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
2108                         interconnect-names = "pcie-mem", "cpu-pcie";
2109
2110                         phys = <&pcie2_phy>;
2111                         phy-names = "pciephy";
2112                         dma-coherent;
2113
2114                         status = "disabled";
2115                 };
2116
2117                 pcie2_phy: phy@1c1c000 {
2118                         compatible = "qcom,sc8180x-qmp-pcie-phy";
2119                         reg = <0 0x01c1c000 0 0x1000>;
2120                         clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
2121                                  <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
2122                                  <&gcc GCC_PCIE_2_CLKREF_CLK>,
2123                                  <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
2124                                  <&gcc GCC_PCIE_2_PIPE_CLK>;
2125                         clock-names = "aux",
2126                                       "cfg_ahb",
2127                                       "ref",
2128                                       "refgen",
2129                                       "pipe";
2130                         #clock-cells = <0>;
2131                         clock-output-names = "pcie_2_pipe_clk";
2132
2133                         #phy-cells = <0>;
2134
2135                         resets = <&gcc GCC_PCIE_2_PHY_BCR>;
2136                         reset-names = "phy";
2137
2138                         assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
2139                         assigned-clock-rates = <100000000>;
2140
2141                         status = "disabled";
2142                 };
2143
2144                 ufs_mem_hc: ufshc@1d84000 {
2145                         compatible = "qcom,sc8180x-ufshc", "qcom,ufshc",
2146                                      "jedec,ufs-2.0";
2147                         reg = <0 0x01d84000 0 0x2500>;
2148                         interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
2149                         phys = <&ufs_mem_phy>;
2150                         phy-names = "ufsphy";
2151                         lanes-per-direction = <2>;
2152                         #reset-cells = <1>;
2153                         resets = <&gcc GCC_UFS_PHY_BCR>;
2154                         reset-names = "rst";
2155
2156                         iommus = <&apps_smmu 0x300 0>;
2157
2158                         clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
2159                                  <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
2160                                  <&gcc GCC_UFS_PHY_AHB_CLK>,
2161                                  <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
2162                                  <&rpmhcc RPMH_CXO_CLK>,
2163                                  <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
2164                                  <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
2165                                  <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
2166                         clock-names = "core_clk",
2167                                       "bus_aggr_clk",
2168                                       "iface_clk",
2169                                       "core_clk_unipro",
2170                                       "ref_clk",
2171                                       "tx_lane0_sync_clk",
2172                                       "rx_lane0_sync_clk",
2173                                       "rx_lane1_sync_clk";
2174                         freq-table-hz = <37500000 300000000>,
2175                                         <0 0>,
2176                                         <0 0>,
2177                                         <37500000 300000000>,
2178                                         <0 0>,
2179                                         <0 0>,
2180                                         <0 0>,
2181                                         <0 0>;
2182
2183                         power-domains = <&gcc UFS_PHY_GDSC>;
2184
2185                         interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
2186                                          &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
2187                                         <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
2188                                          &config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>;
2189                         interconnect-names = "ufs-ddr", "cpu-ufs";
2190
2191                         status = "disabled";
2192                 };
2193
2194                 ufs_mem_phy: phy-wrapper@1d87000 {
2195                         compatible = "qcom,sc8180x-qmp-ufs-phy";
2196                         reg = <0 0x01d87000 0 0x1000>;
2197
2198                         clocks = <&rpmhcc RPMH_CXO_CLK>,
2199                                  <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
2200                                  <&gcc GCC_UFS_MEM_CLKREF_EN>;
2201                         clock-names = "ref",
2202                                       "ref_aux",
2203                                       "qref";
2204
2205                         resets = <&ufs_mem_hc 0>;
2206                         reset-names = "ufsphy";
2207
2208                         #phy-cells = <0>;
2209
2210                         status = "disabled";
2211                 };
2212
2213                 ipa_virt: interconnect@1e00000 {
2214                         compatible = "qcom,sc8180x-ipa-virt";
2215                         reg = <0 0x01e00000 0 0x1000>;
2216                         #interconnect-cells = <2>;
2217                         qcom,bcm-voters = <&apps_bcm_voter>;
2218                 };
2219
2220                 tcsr_mutex: hwlock@1f40000 {
2221                         compatible = "qcom,tcsr-mutex";
2222                         reg = <0x0 0x01f40000 0x0 0x40000>;
2223                         #hwlock-cells = <1>;
2224                 };
2225
2226                 gpu: gpu@2c00000 {
2227                         compatible = "qcom,adreno-680.1", "qcom,adreno";
2228                         #stream-id-cells = <16>;
2229
2230                         reg = <0 0x02c00000 0 0x40000>;
2231                         reg-names = "kgsl_3d0_reg_memory";
2232
2233                         interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
2234
2235                         iommus = <&adreno_smmu 0 0xc01>;
2236
2237                         operating-points-v2 = <&gpu_opp_table>;
2238
2239                         interconnects = <&gem_noc MASTER_GRAPHICS_3D 0 &mc_virt SLAVE_EBI_CH0 0>;
2240                         interconnect-names = "gfx-mem";
2241
2242                         qcom,gmu = <&gmu>;
2243                         #cooling-cells = <2>;
2244
2245                         status = "disabled";
2246
2247                         gpu_opp_table: opp-table {
2248                                 compatible = "operating-points-v2";
2249
2250                                 opp-514000000 {
2251                                         opp-hz = /bits/ 64 <514000000>;
2252                                         opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
2253                                 };
2254
2255                                 opp-500000000 {
2256                                         opp-hz = /bits/ 64 <500000000>;
2257                                         opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
2258                                 };
2259
2260                                 opp-461000000 {
2261                                         opp-hz = /bits/ 64 <461000000>;
2262                                         opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
2263                                 };
2264
2265                                 opp-405000000 {
2266                                         opp-hz = /bits/ 64 <405000000>;
2267                                         opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
2268                                 };
2269
2270                                 opp-315000000 {
2271                                         opp-hz = /bits/ 64 <315000000>;
2272                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
2273                                 };
2274
2275                                 opp-256000000 {
2276                                         opp-hz = /bits/ 64 <256000000>;
2277                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2278                                 };
2279
2280                                 opp-177000000 {
2281                                         opp-hz = /bits/ 64 <177000000>;
2282                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2283                                 };
2284                         };
2285                 };
2286
2287                 gmu: gmu@2c6a000 {
2288                         compatible = "qcom,adreno-gmu-680.1", "qcom,adreno-gmu";
2289
2290                         reg = <0 0x02c6a000 0 0x30000>,
2291                               <0 0x0b290000 0 0x10000>,
2292                               <0 0x0b490000 0 0x10000>;
2293                         reg-names = "gmu",
2294                                     "gmu_pdc",
2295                                     "gmu_pdc_seq";
2296
2297                         interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
2298                                      <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
2299                         interrupt-names = "hfi", "gmu";
2300
2301                         clocks = <&gpucc GPU_CC_AHB_CLK>,
2302                                  <&gpucc GPU_CC_CX_GMU_CLK>,
2303                                  <&gpucc GPU_CC_CXO_CLK>,
2304                                  <&gcc GCC_DDRSS_GPU_AXI_CLK>,
2305                                  <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
2306                         clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
2307
2308                         power-domains = <&gpucc GPU_CX_GDSC>,
2309                                         <&gpucc GPU_GX_GDSC>;
2310                         power-domain-names = "cx", "gx";
2311
2312                         iommus = <&adreno_smmu 5 0xc00>;
2313
2314                         operating-points-v2 = <&gmu_opp_table>;
2315
2316                         gmu_opp_table: opp-table {
2317                                 compatible = "operating-points-v2";
2318
2319                                 opp-200000000 {
2320                                         opp-hz = /bits/ 64 <200000000>;
2321                                         opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
2322                                 };
2323
2324                                 opp-500000000 {
2325                                         opp-hz = /bits/ 64 <500000000>;
2326                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
2327                                 };
2328                         };
2329                 };
2330
2331                 gpucc: clock-controller@2c90000 {
2332                         compatible = "qcom,sc8180x-gpucc";
2333                         reg = <0 0x02c90000 0 0x9000>;
2334                         clocks = <&rpmhcc RPMH_CXO_CLK>,
2335                                  <&gcc GCC_GPU_GPLL0_CLK_SRC>,
2336                                  <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
2337                         clock-names = "bi_tcxo",
2338                                       "gcc_gpu_gpll0_clk_src",
2339                                       "gcc_gpu_gpll0_div_clk_src";
2340                         #clock-cells = <1>;
2341                         #reset-cells = <1>;
2342                         #power-domain-cells = <1>;
2343                 };
2344
2345                 adreno_smmu: iommu@2ca0000 {
2346                         compatible = "qcom,sc8180x-smmu-500", "qcom,adreno-smmu",
2347                                      "qcom,smmu-500", "arm,mmu-500";
2348                         reg = <0 0x02ca0000 0 0x10000>;
2349                         #iommu-cells = <2>;
2350                         #global-interrupts = <1>;
2351                         interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
2352                                      <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
2353                                      <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
2354                                      <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
2355                                      <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
2356                                      <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
2357                                      <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
2358                                      <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
2359                                      <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
2360                         clocks = <&gpucc GPU_CC_AHB_CLK>,
2361                                  <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
2362                                  <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
2363                         clock-names = "ahb", "bus", "iface";
2364
2365                         power-domains = <&gpucc GPU_CX_GDSC>;
2366                 };
2367
2368                 tlmm: pinctrl@3100000 {
2369                         compatible = "qcom,sc8180x-tlmm";
2370                         reg = <0 0x03100000 0 0x300000>,
2371                               <0 0x03500000 0 0x700000>,
2372                               <0 0x03d00000 0 0x300000>;
2373                         reg-names = "west", "east", "south";
2374                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
2375                         gpio-controller;
2376                         #gpio-cells = <2>;
2377                         interrupt-controller;
2378                         #interrupt-cells = <2>;
2379                         gpio-ranges = <&tlmm 0 0 191>;
2380                         wakeup-parent = <&pdc>;
2381                 };
2382
2383                 remoteproc_mpss: remoteproc@4080000 {
2384                         compatible = "qcom,sc8180x-mpss-pas";
2385                         reg = <0x0 0x04080000 0x0 0x4040>;
2386
2387                         interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
2388                                               <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
2389                                               <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
2390                                               <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
2391                                               <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
2392                                               <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
2393                         interrupt-names = "wdog", "fatal", "ready", "handover",
2394                                           "stop-ack", "shutdown-ack";
2395
2396                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2397                         clock-names = "xo";
2398
2399                         power-domains = <&rpmhpd SC8180X_CX>,
2400                                         <&rpmhpd SC8180X_MSS>;
2401                         power-domain-names = "cx", "mss";
2402
2403                         qcom,qmp = <&aoss_qmp>;
2404
2405                         qcom,smem-states = <&modem_smp2p_out 0>;
2406                         qcom,smem-state-names = "stop";
2407
2408                         glink-edge {
2409                                 interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
2410                                 label = "modem";
2411                                 qcom,remote-pid = <1>;
2412                                 mboxes = <&apss_shared 12>;
2413                         };
2414                 };
2415
2416                 remoteproc_cdsp: remoteproc@8300000 {
2417                         compatible = "qcom,sc8180x-cdsp-pas";
2418                         reg = <0x0 0x08300000 0x0 0x4040>;
2419
2420                         interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
2421                                               <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
2422                                               <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
2423                                               <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
2424                                               <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
2425                         interrupt-names = "wdog", "fatal", "ready",
2426                                           "handover", "stop-ack";
2427
2428                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2429                         clock-names = "xo";
2430
2431                         power-domains = <&rpmhpd SC8180X_CX>;
2432                         power-domain-names = "cx";
2433
2434                         qcom,qmp = <&aoss_qmp>;
2435
2436                         qcom,smem-states = <&cdsp_smp2p_out 0>;
2437                         qcom,smem-state-names = "stop";
2438
2439                         status = "disabled";
2440
2441                         glink-edge {
2442                                 interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
2443                                 label = "cdsp";
2444                                 qcom,remote-pid = <5>;
2445                                 mboxes = <&apss_shared 4>;
2446                         };
2447                 };
2448
2449                 usb_prim_hsphy: phy@88e2000 {
2450                         compatible = "qcom,sc8180x-usb-hs-phy",
2451                                      "qcom,usb-snps-hs-7nm-phy";
2452                         reg = <0 0x088e2000 0 0x400>;
2453                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2454                         clock-names = "ref";
2455                         resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2456
2457                         #phy-cells = <0>;
2458
2459                         status = "disabled";
2460                 };
2461
2462                 usb_sec_hsphy: phy@88e3000 {
2463                         compatible = "qcom,sc8180x-usb-hs-phy",
2464                                      "qcom,usb-snps-hs-7nm-phy";
2465                         reg = <0 0x088e3000 0 0x400>;
2466                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2467                         clock-names = "ref";
2468                         resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
2469
2470                         #phy-cells = <0>;
2471
2472                         status = "disabled";
2473                 };
2474
2475                 usb_prim_qmpphy: phy@88e9000 {
2476                         compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
2477                         reg = <0 0x088e9000 0 0x18c>,
2478                               <0 0x088e8000 0 0x38>,
2479                               <0 0x088ea000 0 0x40>;
2480                         reg-names = "reg-base", "dp_com";
2481                         clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2482                                  <&rpmhcc RPMH_CXO_CLK>,
2483                                  <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
2484                                  <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
2485                         clock-names = "aux",
2486                                       "ref_clk_src",
2487                                       "ref",
2488                                       "com_aux";
2489                         resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>,
2490                                  <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
2491                         reset-names = "phy", "common";
2492
2493                         #clock-cells = <1>;
2494                         #address-cells = <2>;
2495                         #size-cells = <2>;
2496                         ranges;
2497
2498                         status = "disabled";
2499
2500                         ports {
2501                                 #address-cells = <1>;
2502                                 #size-cells = <0>;
2503
2504                                 port@0 {
2505                                         reg = <0>;
2506
2507                                         usb_prim_qmpphy_out: endpoint {};
2508                                 };
2509
2510                                 port@2 {
2511                                         reg = <2>;
2512
2513                                         usb_prim_qmpphy_dp_in: endpoint {};
2514                                 };
2515                         };
2516
2517                         usb_prim_ssphy: usb3-phy@88e9200 {
2518                                 reg = <0 0x088e9200 0 0x200>,
2519                                       <0 0x088e9400 0 0x200>,
2520                                       <0 0x088e9c00 0 0x218>,
2521                                       <0 0x088e9600 0 0x200>,
2522                                       <0 0x088e9800 0 0x200>,
2523                                       <0 0x088e9a00 0 0x100>;
2524                                 #phy-cells = <0>;
2525                                 clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2526                                 clock-names = "pipe0";
2527                                 clock-output-names = "usb3_prim_phy_pipe_clk_src";
2528                         };
2529
2530                         usb_prim_dpphy: dp-phy@88ea200 {
2531                                 reg = <0 0x088ea200 0 0x200>,
2532                                       <0 0x088ea400 0 0x200>,
2533                                       <0 0x088eaa00 0 0x200>,
2534                                       <0 0x088ea600 0 0x200>,
2535                                       <0 0x088ea800 0 0x200>;
2536                                 #clock-cells = <1>;
2537                                 #phy-cells = <0>;
2538                         };
2539                 };
2540
2541                 usb_sec_qmpphy: phy@88ee000 {
2542                         compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
2543                         reg = <0 0x088ee000 0 0x18c>,
2544                               <0 0x088ed000 0 0x10>,
2545                               <0 0x088ef000 0 0x40>;
2546                         reg-names = "reg-base", "dp_com";
2547                         clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
2548                                  <&rpmhcc RPMH_CXO_CLK>,
2549                                  <&gcc GCC_USB3_SEC_CLKREF_CLK>,
2550                                  <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
2551                         clock-names = "aux",
2552                                       "ref_clk_src",
2553                                       "ref",
2554                                       "com_aux";
2555                         resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>,
2556                                  <&gcc GCC_USB3_PHY_SEC_BCR>;
2557                         reset-names = "phy", "common";
2558
2559                         #clock-cells = <1>;
2560                         #address-cells = <2>;
2561                         #size-cells = <2>;
2562                         ranges;
2563
2564                         status = "disabled";
2565
2566                         ports {
2567                                 #address-cells = <1>;
2568                                 #size-cells = <0>;
2569
2570                                 port@0 {
2571                                         reg = <0>;
2572
2573                                         usb_sec_qmpphy_out: endpoint {};
2574                                 };
2575
2576                                 port@2 {
2577                                         reg = <2>;
2578
2579                                         usb_sec_qmpphy_dp_in: endpoint {};
2580                                 };
2581                         };
2582
2583                         usb_sec_ssphy: usb3-phy@88e9200 {
2584                                 reg = <0 0x088ee200 0 0x200>,
2585                                       <0 0x088ee400 0 0x200>,
2586                                       <0 0x088eec00 0 0x218>,
2587                                       <0 0x088ee600 0 0x200>,
2588                                       <0 0x088ee800 0 0x200>,
2589                                       <0 0x088eea00 0 0x100>;
2590                                 #phy-cells = <0>;
2591                                 clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
2592                                 clock-names = "pipe0";
2593                                 clock-output-names = "usb3_sec_phy_pipe_clk_src";
2594                         };
2595
2596                         usb_sec_dpphy: dp-phy@88ef200 {
2597                                 reg = <0 0x088ef200 0 0x200>,
2598                                       <0 0x088ef400 0 0x200>,
2599                                       <0 0x088efa00 0 0x200>,
2600                                       <0 0x088ef600 0 0x200>,
2601                                       <0 0x088ef800 0 0x200>;
2602                                 #clock-cells = <1>;
2603                                 #phy-cells = <0>;
2604                                 clock-output-names = "qmp_dptx1_phy_pll_link_clk",
2605                                                      "qmp_dptx1_phy_pll_vco_div_clk";
2606                         };
2607                 };
2608
2609                 system-cache-controller@9200000 {
2610                         compatible = "qcom,sc8180x-llcc";
2611                         reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
2612                               <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
2613                               <0 0x09600000 0 0x50000>;
2614                         reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
2615                                     "llcc3_base", "llcc_broadcast_base";
2616                         interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
2617                 };
2618
2619                 gem_noc: interconnect@9680000 {
2620                         compatible = "qcom,sc8180x-gem-noc";
2621                         reg = <0 0x09680000 0 0x58200>;
2622                         #interconnect-cells = <2>;
2623                         qcom,bcm-voters = <&apps_bcm_voter>;
2624                 };
2625
2626                 usb_prim: usb@a6f8800 {
2627                         compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
2628                         reg = <0 0x0a6f8800 0 0x400>;
2629                         interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
2630                                               <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
2631                                               <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
2632                                               <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
2633                         interrupt-names = "hs_phy_irq",
2634                                           "ss_phy_irq",
2635                                           "dm_hs_phy_irq",
2636                                           "dp_hs_phy_irq";
2637
2638                         clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
2639                                  <&gcc GCC_USB30_PRIM_MASTER_CLK>,
2640                                  <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
2641                                  <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
2642                                  <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2643                                  <&gcc GCC_USB3_SEC_CLKREF_CLK>;
2644                         clock-names = "cfg_noc",
2645                                       "core",
2646                                       "iface",
2647                                       "sleep",
2648                                       "mock_utmi",
2649                                       "xo";
2650                         resets = <&gcc GCC_USB30_PRIM_BCR>;
2651                         power-domains = <&gcc USB30_PRIM_GDSC>;
2652
2653                         interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
2654                                         <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
2655                         interconnect-names = "usb-ddr", "apps-usb";
2656
2657                         assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2658                                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
2659                         assigned-clock-rates = <19200000>, <200000000>;
2660
2661                         #address-cells = <2>;
2662                         #size-cells = <2>;
2663                         ranges;
2664                         dma-ranges;
2665
2666                         status = "disabled";
2667
2668                         usb_prim_dwc3: usb@a600000 {
2669                                 compatible = "snps,dwc3";
2670                                 reg = <0 0x0a600000 0 0xcd00>;
2671                                 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
2672                                 iommus = <&apps_smmu 0x140 0>;
2673                                 snps,dis_u2_susphy_quirk;
2674                                 snps,dis_enblslpm_quirk;
2675                                 phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>;
2676                                 phy-names = "usb2-phy", "usb3-phy";
2677
2678                                 port {
2679                                         usb_prim_role_switch: endpoint {
2680                                         };
2681                                 };
2682                         };
2683                 };
2684
2685                 usb_sec: usb@a8f8800 {
2686                         compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
2687                         reg = <0 0x0a8f8800 0 0x400>;
2688
2689                         clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
2690                                  <&gcc GCC_USB30_SEC_MASTER_CLK>,
2691                                  <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
2692                                  <&gcc GCC_USB30_SEC_SLEEP_CLK>,
2693                                  <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
2694                                  <&gcc GCC_USB3_SEC_CLKREF_CLK>;
2695                         clock-names = "cfg_noc",
2696                                       "core",
2697                                       "iface",
2698                                       "sleep",
2699                                       "mock_utmi",
2700                                       "xo";
2701                         resets = <&gcc GCC_USB30_SEC_BCR>;
2702                         power-domains = <&gcc USB30_SEC_GDSC>;
2703                         interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
2704                                               <&pdc 40 IRQ_TYPE_LEVEL_HIGH>,
2705                                               <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
2706                                               <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
2707                         interrupt-names = "hs_phy_irq", "ss_phy_irq",
2708                                           "dm_hs_phy_irq", "dp_hs_phy_irq";
2709
2710                         assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
2711                                           <&gcc GCC_USB30_SEC_MASTER_CLK>;
2712                         assigned-clock-rates = <19200000>, <200000000>;
2713
2714                         interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
2715                                         <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
2716                         interconnect-names = "usb-ddr", "apps-usb";
2717
2718                         #address-cells = <2>;
2719                         #size-cells = <2>;
2720                         ranges;
2721                         dma-ranges;
2722
2723                         status = "disabled";
2724
2725                         usb_sec_dwc3: usb@a800000 {
2726                                 compatible = "snps,dwc3";
2727                                 reg = <0 0x0a800000 0 0xcd00>;
2728                                 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
2729                                 iommus = <&apps_smmu 0x160 0>;
2730                                 snps,dis_u2_susphy_quirk;
2731                                 snps,dis_enblslpm_quirk;
2732                                 phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
2733                                 phy-names = "usb2-phy", "usb3-phy";
2734
2735                                 port {
2736                                         usb_sec_role_switch: endpoint {
2737                                         };
2738                                 };
2739                         };
2740                 };
2741
2742                 mdss: mdss@ae00000 {
2743                         compatible = "qcom,sc8180x-mdss";
2744                         reg = <0 0x0ae00000 0 0x1000>;
2745                         reg-names = "mdss";
2746
2747                         power-domains = <&dispcc MDSS_GDSC>;
2748
2749                         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2750                                  <&gcc GCC_DISP_HF_AXI_CLK>,
2751                                  <&gcc GCC_DISP_SF_AXI_CLK>,
2752                                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
2753                         clock-names = "iface",
2754                                       "bus",
2755                                       "nrt_bus",
2756                                       "core";
2757
2758                         resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
2759
2760                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
2761                         interrupt-controller;
2762                         #interrupt-cells = <1>;
2763
2764                         interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS
2765                                          &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
2766                                         <&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS
2767                                          &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
2768                                         <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
2769                                          &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
2770                         interconnect-names = "mdp0-mem",
2771                                              "mdp1-mem",
2772                                              "cpu-cfg";
2773
2774                         iommus = <&apps_smmu 0x800 0x420>;
2775
2776                         #address-cells = <2>;
2777                         #size-cells = <2>;
2778                         ranges;
2779
2780                         status = "disabled";
2781
2782                         mdss_mdp: mdp@ae01000 {
2783                                 compatible = "qcom,sc8180x-dpu";
2784                                 reg = <0 0x0ae01000 0 0x8f000>,
2785                                       <0 0x0aeb0000 0 0x2008>;
2786                                 reg-names = "mdp", "vbif";
2787
2788                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2789                                          <&gcc GCC_DISP_HF_AXI_CLK>,
2790                                          <&dispcc DISP_CC_MDSS_MDP_CLK>,
2791                                          <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
2792                                          <&dispcc DISP_CC_MDSS_ROT_CLK>,
2793                                          <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
2794                                 clock-names = "iface",
2795                                               "bus",
2796                                               "core",
2797                                               "vsync",
2798                                               "rot",
2799                                               "lut";
2800
2801                                 assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2802                                 assigned-clock-rates = <19200000>;
2803
2804                                 operating-points-v2 = <&mdp_opp_table>;
2805                                 power-domains = <&rpmhpd SC8180X_MMCX>;
2806
2807                                 interrupt-parent = <&mdss>;
2808                                 interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
2809
2810                                 ports {
2811                                         #address-cells = <1>;
2812                                         #size-cells = <0>;
2813
2814                                         port@0 {
2815                                                 reg = <0>;
2816                                                 dpu_intf0_out: endpoint {
2817                                                         remote-endpoint = <&dp0_in>;
2818                                                 };
2819                                         };
2820
2821                                         port@1 {
2822                                                 reg = <1>;
2823                                                 dpu_intf1_out: endpoint {
2824                                                         remote-endpoint = <&mdss_dsi0_in>;
2825                                                 };
2826                                         };
2827
2828                                         port@2 {
2829                                                 reg = <2>;
2830                                                 dpu_intf2_out: endpoint {
2831                                                         remote-endpoint = <&mdss_dsi1_in>;
2832                                                 };
2833                                         };
2834
2835                                         port@4 {
2836                                                 reg = <4>;
2837                                                 dpu_intf4_out: endpoint {
2838                                                         remote-endpoint = <&dp1_in>;
2839                                                 };
2840                                         };
2841
2842                                         port@5 {
2843                                                 reg = <5>;
2844                                                 dpu_intf5_out: endpoint {
2845                                                         remote-endpoint = <&edp_in>;
2846                                                 };
2847                                         };
2848                                 };
2849
2850                                 mdp_opp_table: opp-table {
2851                                         compatible = "operating-points-v2";
2852
2853                                         opp-200000000 {
2854                                                 opp-hz = /bits/ 64 <200000000>;
2855                                                 required-opps = <&rpmhpd_opp_low_svs>;
2856                                         };
2857
2858                                         opp-300000000 {
2859                                                 opp-hz = /bits/ 64 <300000000>;
2860                                                 required-opps = <&rpmhpd_opp_svs>;
2861                                         };
2862
2863                                         opp-345000000 {
2864                                                 opp-hz = /bits/ 64 <345000000>;
2865                                                 required-opps = <&rpmhpd_opp_svs_l1>;
2866                                         };
2867
2868                                         opp-460000000 {
2869                                                 opp-hz = /bits/ 64 <460000000>;
2870                                                 required-opps = <&rpmhpd_opp_nom>;
2871                                         };
2872                                 };
2873                         };
2874
2875                         mdss_dsi0: dsi@ae94000 {
2876                                 compatible = "qcom,mdss-dsi-ctrl";
2877                                 reg = <0 0x0ae94000 0 0x400>;
2878                                 reg-names = "dsi_ctrl";
2879
2880                                 interrupt-parent = <&mdss>;
2881                                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
2882
2883                                 clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
2884                                          <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
2885                                          <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
2886                                          <&dispcc DISP_CC_MDSS_ESC0_CLK>,
2887                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
2888                                          <&gcc GCC_DISP_HF_AXI_CLK>;
2889                                 clock-names = "byte",
2890                                               "byte_intf",
2891                                               "pixel",
2892                                               "core",
2893                                               "iface",
2894                                               "bus";
2895
2896                                 operating-points-v2 = <&dsi_opp_table>;
2897                                 power-domains = <&rpmhpd SC8180X_MMCX>;
2898
2899                                 phys = <&mdss_dsi0_phy>;
2900                                 phy-names = "dsi";
2901
2902                                 status = "disabled";
2903
2904                                 ports {
2905                                         #address-cells = <1>;
2906                                         #size-cells = <0>;
2907
2908                                         port@0 {
2909                                                 reg = <0>;
2910                                                 mdss_dsi0_in: endpoint {
2911                                                         remote-endpoint = <&dpu_intf1_out>;
2912                                                 };
2913                                         };
2914
2915                                         port@1 {
2916                                                 reg = <1>;
2917                                                 mdss_dsi0_out: endpoint {
2918                                                 };
2919                                         };
2920                                 };
2921
2922                                 dsi_opp_table: opp-table {
2923                                         compatible = "operating-points-v2";
2924
2925                                         opp-187500000 {
2926                                                 opp-hz = /bits/ 64 <187500000>;
2927                                                 required-opps = <&rpmhpd_opp_low_svs>;
2928                                         };
2929
2930                                         opp-300000000 {
2931                                                 opp-hz = /bits/ 64 <300000000>;
2932                                                 required-opps = <&rpmhpd_opp_svs>;
2933                                         };
2934
2935                                         opp-358000000 {
2936                                                 opp-hz = /bits/ 64 <358000000>;
2937                                                 required-opps = <&rpmhpd_opp_svs_l1>;
2938                                         };
2939                                 };
2940                         };
2941
2942                         mdss_dsi0_phy: dsi-phy@ae94400 {
2943                                 compatible = "qcom,dsi-phy-7nm";
2944                                 reg = <0 0x0ae94400 0 0x200>,
2945                                       <0 0x0ae94600 0 0x280>,
2946                                       <0 0x0ae94900 0 0x260>;
2947                                 reg-names = "dsi_phy",
2948                                             "dsi_phy_lane",
2949                                             "dsi_pll";
2950
2951                                 #clock-cells = <1>;
2952                                 #phy-cells = <0>;
2953
2954                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2955                                          <&rpmhcc RPMH_CXO_CLK>;
2956                                 clock-names = "iface", "ref";
2957
2958                                 status = "disabled";
2959                         };
2960
2961                         mdss_dsi1: dsi@ae96000 {
2962                                 compatible = "qcom,mdss-dsi-ctrl";
2963                                 reg = <0 0x0ae96000 0 0x400>;
2964                                 reg-names = "dsi_ctrl";
2965
2966                                 interrupt-parent = <&mdss>;
2967                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
2968
2969                                 clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
2970                                          <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
2971                                          <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
2972                                          <&dispcc DISP_CC_MDSS_ESC1_CLK>,
2973                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
2974                                          <&gcc GCC_DISP_HF_AXI_CLK>;
2975                                 clock-names = "byte",
2976                                               "byte_intf",
2977                                               "pixel",
2978                                               "core",
2979                                               "iface",
2980                                               "bus";
2981
2982                                 operating-points-v2 = <&dsi_opp_table>;
2983                                 power-domains = <&rpmhpd SC8180X_MMCX>;
2984
2985                                 phys = <&mdss_dsi1_phy>;
2986                                 phy-names = "dsi";
2987
2988                                 status = "disabled";
2989
2990                                 ports {
2991                                         #address-cells = <1>;
2992                                         #size-cells = <0>;
2993
2994                                         port@0 {
2995                                                 reg = <0>;
2996                                                 mdss_dsi1_in: endpoint {
2997                                                         remote-endpoint = <&dpu_intf2_out>;
2998                                                 };
2999                                         };
3000
3001                                         port@1 {
3002                                                 reg = <1>;
3003                                                 mdss_dsi1_out: endpoint {
3004                                                 };
3005                                         };
3006                                 };
3007                         };
3008
3009                         mdss_dsi1_phy: dsi-phy@ae96400 {
3010                                 compatible = "qcom,dsi-phy-7nm";
3011                                 reg = <0 0x0ae96400 0 0x200>,
3012                                       <0 0x0ae96600 0 0x280>,
3013                                       <0 0x0ae96900 0 0x260>;
3014                                 reg-names = "dsi_phy",
3015                                             "dsi_phy_lane",
3016                                             "dsi_pll";
3017
3018                                 #clock-cells = <1>;
3019                                 #phy-cells = <0>;
3020
3021                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3022                                          <&rpmhcc RPMH_CXO_CLK>;
3023                                 clock-names = "iface", "ref";
3024
3025                                 status = "disabled";
3026                         };
3027
3028                         mdss_dp0: displayport-controller@ae90000 {
3029                                 compatible = "qcom,sc8180x-dp";
3030                                 reg = <0 0xae90000 0 0x200>,
3031                                       <0 0xae90200 0 0x200>,
3032                                       <0 0xae90400 0 0x600>,
3033                                       <0 0xae90a00 0 0x400>;
3034                                 interrupt-parent = <&mdss>;
3035                                 interrupts = <12>;
3036                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3037                                          <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
3038                                          <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
3039                                          <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
3040                                          <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
3041                                 clock-names = "core_iface",
3042                                               "core_aux",
3043                                               "ctrl_link",
3044                                               "ctrl_link_iface",
3045                                               "stream_pixel";
3046
3047                                 assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
3048                                                   <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
3049                                 assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>;
3050
3051                                 phys = <&usb_prim_dpphy>;
3052                                 phy-names = "dp";
3053
3054                                 #sound-dai-cells = <0>;
3055
3056                                 operating-points-v2 = <&dp0_opp_table>;
3057                                 power-domains = <&rpmhpd SC8180X_MMCX>;
3058
3059                                 status = "disabled";
3060
3061                                 ports {
3062                                         #address-cells = <1>;
3063                                         #size-cells = <0>;
3064
3065                                         port@0 {
3066                                                 reg = <0>;
3067                                                 dp0_in: endpoint {
3068                                                         remote-endpoint = <&dpu_intf0_out>;
3069                                                 };
3070                                         };
3071
3072                                         port@1 {
3073                                                 reg = <1>;
3074                                                 mdss_dp0_out: endpoint {
3075                                                 };
3076                                         };
3077                                 };
3078
3079                                 dp0_opp_table: opp-table {
3080                                         compatible = "operating-points-v2";
3081
3082                                         opp-160000000 {
3083                                                 opp-hz = /bits/ 64 <160000000>;
3084                                                 required-opps = <&rpmhpd_opp_low_svs>;
3085                                         };
3086
3087                                         opp-270000000 {
3088                                                 opp-hz = /bits/ 64 <270000000>;
3089                                                 required-opps = <&rpmhpd_opp_svs>;
3090                                         };
3091
3092                                         opp-540000000 {
3093                                                 opp-hz = /bits/ 64 <540000000>;
3094                                                 required-opps = <&rpmhpd_opp_svs_l1>;
3095                                         };
3096
3097                                         opp-810000000 {
3098                                                 opp-hz = /bits/ 64 <810000000>;
3099                                                 required-opps = <&rpmhpd_opp_nom>;
3100                                         };
3101                                 };
3102                         };
3103
3104                         mdss_dp1: displayport-controller@ae98000 {
3105                                 compatible = "qcom,sc8180x-dp";
3106                                 reg = <0 0xae98000 0 0x200>,
3107                                       <0 0xae98200 0 0x200>,
3108                                       <0 0xae98400 0 0x600>,
3109                                       <0 0xae98a00 0 0x400>;
3110                                 interrupt-parent = <&mdss>;
3111                                 interrupts = <13>;
3112                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3113                                          <&dispcc DISP_CC_MDSS_DP_AUX1_CLK>,
3114                                          <&dispcc DISP_CC_MDSS_DP_LINK1_CLK>,
3115                                          <&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>,
3116                                          <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>;
3117                                 clock-names = "core_iface",
3118                                               "core_aux",
3119                                               "ctrl_link",
3120                                               "ctrl_link_iface",
3121                                               "stream_pixel";
3122
3123                                 assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
3124                                                   <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
3125                                 assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>;
3126
3127                                 phys = <&usb_sec_dpphy>;
3128                                 phy-names = "dp";
3129
3130                                 #sound-dai-cells = <0>;
3131
3132                                 operating-points-v2 = <&dp0_opp_table>;
3133                                 power-domains = <&rpmhpd SC8180X_MMCX>;
3134
3135                                 status = "disabled";
3136
3137                                 ports {
3138                                         #address-cells = <1>;
3139                                         #size-cells = <0>;
3140
3141                                         port@0 {
3142                                                 reg = <0>;
3143                                                 dp1_in: endpoint {
3144                                                         remote-endpoint = <&dpu_intf4_out>;
3145                                                 };
3146                                         };
3147
3148                                         port@1 {
3149                                                 reg = <1>;
3150                                                 mdss_dp1_out: endpoint {
3151                                                 };
3152                                         };
3153                                 };
3154
3155                                 dp1_opp_table: opp-table {
3156                                         compatible = "operating-points-v2";
3157
3158                                         opp-160000000 {
3159                                                 opp-hz = /bits/ 64 <160000000>;
3160                                                 required-opps = <&rpmhpd_opp_low_svs>;
3161                                         };
3162
3163                                         opp-270000000 {
3164                                                 opp-hz = /bits/ 64 <270000000>;
3165                                                 required-opps = <&rpmhpd_opp_svs>;
3166                                         };
3167
3168                                         opp-540000000 {
3169                                                 opp-hz = /bits/ 64 <540000000>;
3170                                                 required-opps = <&rpmhpd_opp_svs_l1>;
3171                                         };
3172
3173                                         opp-810000000 {
3174                                                 opp-hz = /bits/ 64 <810000000>;
3175                                                 required-opps = <&rpmhpd_opp_nom>;
3176                                         };
3177                                 };
3178                         };
3179
3180                         mdss_edp: displayport-controller@ae9a000 {
3181                                 compatible = "qcom,sc8180x-edp";
3182                                 reg = <0 0xae9a000 0 0x200>,
3183                                       <0 0xae9a200 0 0x200>,
3184                                       <0 0xae9a400 0 0x600>,
3185                                       <0 0xae9aa00 0 0x400>;
3186                                 interrupt-parent = <&mdss>;
3187                                 interrupts = <14>;
3188                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3189                                          <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
3190                                          <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
3191                                          <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
3192                                          <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
3193                                 clock-names = "core_iface",
3194                                               "core_aux",
3195                                               "ctrl_link",
3196                                                "ctrl_link_iface",
3197                                               "stream_pixel";
3198
3199                                 assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
3200                                                   <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
3201                                 assigned-clock-parents = <&edp_phy 0>, <&edp_phy 1>;
3202
3203                                 phys = <&edp_phy>;
3204                                 phy-names = "dp";
3205
3206                                 operating-points-v2 = <&edp_opp_table>;
3207                                 power-domains = <&rpmhpd SC8180X_MMCX>;
3208
3209                                 status = "disabled";
3210
3211                                 ports {
3212                                         #address-cells = <1>;
3213                                         #size-cells = <0>;
3214
3215                                         port@0 {
3216                                                 reg = <0>;
3217                                                 edp_in: endpoint {
3218                                                         remote-endpoint = <&dpu_intf5_out>;
3219                                                 };
3220                                         };
3221                                 };
3222
3223                                 edp_opp_table: opp-table {
3224                                         compatible = "operating-points-v2";
3225
3226                                         opp-160000000 {
3227                                                 opp-hz = /bits/ 64 <160000000>;
3228                                                 required-opps = <&rpmhpd_opp_low_svs>;
3229                                         };
3230
3231                                         opp-270000000 {
3232                                                 opp-hz = /bits/ 64 <270000000>;
3233                                                 required-opps = <&rpmhpd_opp_svs>;
3234                                         };
3235
3236                                         opp-540000000 {
3237                                                 opp-hz = /bits/ 64 <540000000>;
3238                                                 required-opps = <&rpmhpd_opp_svs_l1>;
3239                                         };
3240
3241                                         opp-810000000 {
3242                                                 opp-hz = /bits/ 64 <810000000>;
3243                                                 required-opps = <&rpmhpd_opp_nom>;
3244                                         };
3245                                 };
3246                         };
3247                 };
3248
3249                 edp_phy: phy@aec2a00 {
3250                         compatible = "qcom,sc8180x-edp-phy";
3251                         reg = <0 0x0aec2a00 0 0x1c0>,
3252                               <0 0x0aec2200 0 0xa0>,
3253                               <0 0x0aec2600 0 0xa0>,
3254                               <0 0x0aec2000 0 0x19c>;
3255
3256                         clocks = <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
3257                                  <&dispcc DISP_CC_MDSS_AHB_CLK>;
3258                         clock-names = "aux", "cfg_ahb";
3259
3260                         power-domains = <&rpmhpd SC8180X_MX>;
3261
3262                         #clock-cells = <1>;
3263                         #phy-cells = <0>;
3264                 };
3265
3266                 dispcc: clock-controller@af00000 {
3267                         compatible = "qcom,sc8180x-dispcc";
3268                         reg = <0 0x0af00000 0 0x20000>;
3269                         clocks = <&rpmhcc RPMH_CXO_CLK>,
3270                                  <&sleep_clk>,
3271                                  <&usb_prim_dpphy 0>,
3272                                  <&usb_prim_dpphy 1>,
3273                                  <&usb_sec_dpphy 0>,
3274                                  <&usb_sec_dpphy 1>,
3275                                  <&edp_phy 0>,
3276                                  <&edp_phy 1>;
3277                         clock-names = "bi_tcxo",
3278                                       "sleep_clk",
3279                                       "dp_phy_pll_link_clk",
3280                                       "dp_phy_pll_vco_div_clk",
3281                                       "dptx1_phy_pll_link_clk",
3282                                       "dptx1_phy_pll_vco_div_clk",
3283                                       "edp_phy_pll_link_clk",
3284                                       "edp_phy_pll_vco_div_clk";
3285                         power-domains = <&rpmhpd SC8180X_MMCX>;
3286                         required-opps = <&rpmhpd_opp_low_svs>;
3287                         #clock-cells = <1>;
3288                         #reset-cells = <1>;
3289                         #power-domain-cells = <1>;
3290                 };
3291
3292                 pdc: interrupt-controller@b220000 {
3293                         compatible = "qcom,sc8180x-pdc", "qcom,pdc";
3294                         reg = <0 0x0b220000 0 0x30000>;
3295                         qcom,pdc-ranges = <0 480 94>, <94 609 31>;
3296                         #interrupt-cells = <2>;
3297                         interrupt-parent = <&intc>;
3298                         interrupt-controller;
3299                 };
3300
3301                 tsens0: thermal-sensor@c263000 {
3302                         compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2";
3303                         reg = <0 0x0c263000 0 0x1ff>, /* TM */
3304                               <0 0x0c222000 0 0x1ff>; /* SROT */
3305                         #qcom,sensors = <16>;
3306                         interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
3307                                      <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
3308                         interrupt-names = "uplow", "critical";
3309                         #thermal-sensor-cells = <1>;
3310                 };
3311
3312                 tsens1: thermal-sensor@c265000 {
3313                         compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2";
3314                         reg = <0 0x0c265000 0 0x1ff>, /* TM */
3315                               <0 0x0c223000 0 0x1ff>; /* SROT */
3316                         #qcom,sensors = <9>;
3317                         interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
3318                                      <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
3319                         interrupt-names = "uplow", "critical";
3320                         #thermal-sensor-cells = <1>;
3321                 };
3322
3323                 aoss_qmp: power-controller@c300000 {
3324                         compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp";
3325                         reg = <0x0 0x0c300000 0x0 0x400>;
3326                         interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
3327                         mboxes = <&apss_shared 0>;
3328
3329                         #clock-cells = <0>;
3330                         #power-domain-cells = <1>;
3331                 };
3332
3333                 sram@c3f0000 {
3334                         compatible = "qcom,rpmh-stats";
3335                         reg = <0x0 0x0c3f0000 0x0 0x400>;
3336                 };
3337
3338                 spmi_bus: spmi@c440000 {
3339                         compatible = "qcom,spmi-pmic-arb";
3340                         reg = <0x0 0x0c440000 0x0 0x0001100>,
3341                               <0x0 0x0c600000 0x0 0x2000000>,
3342                               <0x0 0x0e600000 0x0 0x0100000>,
3343                               <0x0 0x0e700000 0x0 0x00a0000>,
3344                               <0x0 0x0c40a000 0x0 0x0026000>;
3345                         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
3346                         interrupt-names = "periph_irq";
3347                         interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
3348                         qcom,ee = <0>;
3349                         qcom,channel = <0>;
3350                         #address-cells = <2>;
3351                         #size-cells = <0>;
3352                         interrupt-controller;
3353                         #interrupt-cells = <4>;
3354                 };
3355
3356                 apps_smmu: iommu@15000000 {
3357                         compatible = "qcom,sc8180x-smmu-500", "arm,mmu-500";
3358                         reg = <0 0x15000000 0 0x100000>;
3359                         #iommu-cells = <2>;
3360                         #global-interrupts = <1>;
3361                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
3362                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
3363                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
3364                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
3365                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
3366                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
3367                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
3368                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
3369                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
3370                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
3371                                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
3372                                      <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
3373                                      <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
3374                                      <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
3375                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
3376                                      <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
3377                                      <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
3378                                      <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
3379                                      <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
3380                                      <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
3381                                      <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
3382                                      <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
3383                                      <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
3384                                      <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
3385                                      <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
3386                                      <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
3387                                      <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
3388                                      <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
3389                                      <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
3390                                      <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
3391                                      <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
3392                                      <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
3393                                      <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
3394                                      <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
3395                                      <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
3396                                      <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
3397                                      <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
3398                                      <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
3399                                      <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
3400                                      <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
3401                                      <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
3402                                      <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
3403                                      <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
3404                                      <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
3405                                      <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
3406                                      <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
3407                                      <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
3408                                      <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
3409                                      <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
3410                                      <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
3411                                      <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
3412                                      <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
3413                                      <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
3414                                      <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
3415                                      <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
3416                                      <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
3417                                      <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
3418                                      <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
3419                                      <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
3420                                      <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
3421                                      <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
3422                                      <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
3423                                      <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
3424                                      <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
3425                                      <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
3426                                      <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
3427                                      <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
3428                                      <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
3429                                      <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
3430                                      <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
3431                                      <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
3432                                      <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
3433                                      <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
3434                                      <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
3435                                      <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
3436                                      <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
3437                                      <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
3438                                      <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
3439                                      <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
3440                                      <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
3441                                      <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
3442                                      <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
3443                                      <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
3444                                      <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
3445                                      <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
3446                                      <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
3447                                      <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
3448                                      <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
3449                                      <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
3450                                      <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
3451                                      <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
3452                                      <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
3453                                      <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
3454                                      <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
3455                                      <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
3456                                      <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>,
3457                                      <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>,
3458                                      <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
3459                                      <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
3460                                      <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
3461                                      <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
3462                                      <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
3463                                      <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
3464                                      <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
3465                                      <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
3466                                      <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
3467                                      <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>;
3468
3469                 };
3470
3471                 remoteproc_adsp: remoteproc@17300000 {
3472                         compatible = "qcom,sc8180x-adsp-pas";
3473                         reg = <0x0 0x17300000 0x0 0x4040>;
3474
3475                         interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
3476                                               <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
3477                                               <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
3478                                               <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
3479                                               <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
3480                         interrupt-names = "wdog", "fatal", "ready",
3481                                           "handover", "stop-ack";
3482
3483                         clocks = <&rpmhcc RPMH_CXO_CLK>;
3484                         clock-names = "xo";
3485
3486                         power-domains = <&rpmhpd SC8180X_CX>;
3487                         power-domain-names = "cx";
3488
3489                         qcom,qmp = <&aoss_qmp>;
3490
3491                         qcom,smem-states = <&adsp_smp2p_out 0>;
3492                         qcom,smem-state-names = "stop";
3493
3494                         status = "disabled";
3495
3496                         remoteproc_adsp_glink: glink-edge {
3497                                 interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
3498                                 label = "lpass";
3499                                 qcom,remote-pid = <2>;
3500                                 mboxes = <&apss_shared 8>;
3501                         };
3502                 };
3503
3504                 intc: interrupt-controller@17a00000 {
3505                         compatible = "arm,gic-v3";
3506                         interrupt-controller;
3507                         #interrupt-cells = <3>;
3508                         reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
3509                               <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
3510                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3511                         #redistributor-regions = <1>;
3512                         redistributor-stride = <0 0x20000>;
3513                 };
3514
3515                 apss_shared: mailbox@17c00000 {
3516                         compatible = "qcom,sc8180x-apss-shared", "qcom,sdm845-apss-shared";
3517                         reg = <0x0 0x17c00000 0x0 0x1000>;
3518                         #mbox-cells = <1>;
3519                 };
3520
3521                 timer@17c20000 {
3522                         compatible = "arm,armv7-timer-mem";
3523                         reg = <0x0 0x17c20000 0x0 0x1000>;
3524
3525                         #address-cells = <1>;
3526                         #size-cells = <1>;
3527                         ranges = <0 0 0 0x20000000>;
3528
3529                         frame@17c21000 {
3530                                 reg = <0x17c21000 0x1000>,
3531                                       <0x17c22000 0x1000>;
3532                                 frame-number = <0>;
3533                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3534                                              <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
3535                         };
3536
3537                         frame@17c23000 {
3538                                 reg = <0x17c23000 0x1000>;
3539                                 frame-number = <1>;
3540                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3541                                 status = "disabled";
3542                         };
3543
3544                         frame@17c25000 {
3545                                 reg = <0x17c25000 0x1000>;
3546                                 frame-number = <2>;
3547                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3548                                 status = "disabled";
3549                         };
3550
3551                         frame@17c27000 {
3552                                 reg = <0x17c26000 0x1000>;
3553                                 frame-number = <3>;
3554                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3555                                 status = "disabled";
3556                         };
3557
3558                         frame@17c29000 {
3559                                 reg = <0x17c29000 0x1000>;
3560                                 frame-number = <4>;
3561                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3562                                 status = "disabled";
3563                         };
3564
3565                         frame@17c2b000 {
3566                                 reg = <0x17c2b000 0x1000>;
3567                                 frame-number = <5>;
3568                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3569                                 status = "disabled";
3570                         };
3571
3572                         frame@17c2d000 {
3573                                 reg = <0x17c2d000 0x1000>;
3574                                 frame-number = <6>;
3575                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3576                                 status = "disabled";
3577                         };
3578                 };
3579
3580                 apps_rsc: rsc@18200000 {
3581                         compatible = "qcom,rpmh-rsc";
3582                         reg = <0x0 0x18200000 0x0 0x10000>,
3583                               <0x0 0x18210000 0x0 0x10000>,
3584                               <0x0 0x18220000 0x0 0x10000>;
3585                         reg-names = "drv-0", "drv-1", "drv-2";
3586                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
3587                                      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
3588                                      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
3589                         qcom,tcs-offset = <0xd00>;
3590                         qcom,drv-id = <2>;
3591                         qcom,tcs-config = <ACTIVE_TCS  2>,
3592                                           <SLEEP_TCS   1>,
3593                                           <WAKE_TCS    1>,
3594                                           <CONTROL_TCS 0>;
3595                         label = "apps_rsc";
3596                         power-domains = <&CLUSTER_PD>;
3597
3598                         apps_bcm_voter: bcm-voter {
3599                                 compatible = "qcom,bcm-voter";
3600                         };
3601
3602                         rpmhcc: clock-controller {
3603                                 compatible = "qcom,sc8180x-rpmh-clk";
3604                                 #clock-cells = <1>;
3605                                 clock-names = "xo";
3606                                 clocks = <&xo_board_clk>;
3607                         };
3608
3609                         rpmhpd: power-controller {
3610                                 compatible = "qcom,sc8180x-rpmhpd";
3611                                 #power-domain-cells = <1>;
3612                                 operating-points-v2 = <&rpmhpd_opp_table>;
3613
3614                                 rpmhpd_opp_table: opp-table {
3615                                         compatible = "operating-points-v2";
3616
3617                                         rpmhpd_opp_ret: opp1 {
3618                                                 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
3619                                         };
3620
3621                                         rpmhpd_opp_min_svs: opp2 {
3622                                                 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
3623                                         };
3624
3625                                         rpmhpd_opp_low_svs: opp3 {
3626                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
3627                                         };
3628
3629                                         rpmhpd_opp_svs: opp4 {
3630                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
3631                                         };
3632
3633                                         rpmhpd_opp_svs_l1: opp5 {
3634                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
3635                                         };
3636
3637                                         rpmhpd_opp_nom: opp6 {
3638                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
3639                                         };
3640
3641                                         rpmhpd_opp_nom_l1: opp7 {
3642                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
3643                                         };
3644
3645                                         rpmhpd_opp_nom_l2: opp8 {
3646                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
3647                                         };
3648
3649                                         rpmhpd_opp_turbo: opp9 {
3650                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
3651                                         };
3652
3653                                         rpmhpd_opp_turbo_l1: opp10 {
3654                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
3655                                         };
3656                                 };
3657                         };
3658                 };
3659
3660                 osm_l3: interconnect@18321000 {
3661                         compatible = "qcom,sc8180x-osm-l3", "qcom,osm-l3";
3662                         reg = <0 0x18321000 0 0x1400>;
3663
3664                         clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
3665                         clock-names = "xo", "alternate";
3666
3667                         #interconnect-cells = <1>;
3668                 };
3669
3670                 lmh@18350800 {
3671                         compatible = "qcom,sc8180x-lmh";
3672                         reg = <0 0x18350800 0 0x400>;
3673                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
3674                         cpus = <&CPU4>;
3675                         qcom,lmh-temp-arm-millicelsius = <65000>;
3676                         qcom,lmh-temp-low-millicelsius = <94500>;
3677                         qcom,lmh-temp-high-millicelsius = <95000>;
3678                         interrupt-controller;
3679                         #interrupt-cells = <1>;
3680                 };
3681
3682                 lmh@18358800 {
3683                         compatible = "qcom,sc8180x-lmh";
3684                         reg = <0 0x18358800 0 0x400>;
3685                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
3686                         cpus = <&CPU0>;
3687                         qcom,lmh-temp-arm-millicelsius = <65000>;
3688                         qcom,lmh-temp-low-millicelsius = <94500>;
3689                         qcom,lmh-temp-high-millicelsius = <95000>;
3690                         interrupt-controller;
3691                         #interrupt-cells = <1>;
3692                 };
3693
3694                 cpufreq_hw: cpufreq@18323000 {
3695                         compatible = "qcom,cpufreq-hw";
3696                         reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
3697                         reg-names = "freq-domain0", "freq-domain1";
3698
3699                         clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
3700                         clock-names = "xo", "alternate";
3701
3702                         #freq-domain-cells = <1>;
3703                         #clock-cells = <1>;
3704                 };
3705
3706                 wifi: wifi@18800000 {
3707                         compatible = "qcom,wcn3990-wifi";
3708                         reg = <0 0x18800000 0 0x800000>;
3709                         reg-names = "membase";
3710                         clock-names = "cxo_ref_clk_pin";
3711                         clocks = <&rpmhcc RPMH_RF_CLK2>;
3712                         interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
3713                                      <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
3714                                      <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
3715                                      <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
3716                                      <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
3717                                      <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
3718                                      <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
3719                                      <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
3720                                      <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
3721                                      <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
3722                                      <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
3723                                      <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
3724                         iommus = <&apps_smmu 0x0640 0x1>;
3725                         qcom,msa-fixed-perm;
3726                         status = "disabled";
3727                 };
3728         };
3729
3730         thermal-zones {
3731                 cpu0-thermal {
3732                         polling-delay-passive = <250>;
3733                         polling-delay = <1000>;
3734
3735                         thermal-sensors = <&tsens0 1>;
3736
3737                         trips {
3738                                 cpu-crit {
3739                                         temperature = <110000>;
3740                                         hysteresis = <1000>;
3741                                         type = "critical";
3742                                 };
3743                         };
3744                 };
3745
3746                 cpu1-thermal {
3747                         polling-delay-passive = <250>;
3748                         polling-delay = <1000>;
3749
3750                         thermal-sensors = <&tsens0 2>;
3751
3752                         trips {
3753                                 cpu-crit {
3754                                         temperature = <110000>;
3755                                         hysteresis = <1000>;
3756                                         type = "critical";
3757                                 };
3758                         };
3759                 };
3760
3761                 cpu2-thermal {
3762                         polling-delay-passive = <250>;
3763                         polling-delay = <1000>;
3764
3765                         thermal-sensors = <&tsens0 3>;
3766
3767                         trips {
3768                                 cpu-crit {
3769                                         temperature = <110000>;
3770                                         hysteresis = <1000>;
3771                                         type = "critical";
3772                                 };
3773                         };
3774                 };
3775
3776                 cpu3-thermal {
3777                         polling-delay-passive = <250>;
3778                         polling-delay = <1000>;
3779
3780                         thermal-sensors = <&tsens0 4>;
3781
3782                         trips {
3783                                 cpu-crit {
3784                                         temperature = <110000>;
3785                                         hysteresis = <1000>;
3786                                         type = "critical";
3787                                 };
3788                         };
3789                 };
3790
3791                 cpu4-top-thermal {
3792                         polling-delay-passive = <250>;
3793                         polling-delay = <1000>;
3794
3795                         thermal-sensors = <&tsens0 7>;
3796
3797                         trips {
3798                                 cpu-crit {
3799                                         temperature = <110000>;
3800                                         hysteresis = <1000>;
3801                                         type = "critical";
3802                                 };
3803                         };
3804                 };
3805
3806                 cpu5-top-thermal {
3807                         polling-delay-passive = <250>;
3808                         polling-delay = <1000>;
3809
3810                         thermal-sensors = <&tsens0 8>;
3811
3812                         trips {
3813                                 cpu-crit {
3814                                         temperature = <110000>;
3815                                         hysteresis = <1000>;
3816                                         type = "critical";
3817                                 };
3818                         };
3819                 };
3820
3821                 cpu6-top-thermal {
3822                         polling-delay-passive = <250>;
3823                         polling-delay = <1000>;
3824
3825                         thermal-sensors = <&tsens0 9>;
3826
3827                         trips {
3828                                 cpu-crit {
3829                                         temperature = <110000>;
3830                                         hysteresis = <1000>;
3831                                         type = "critical";
3832                                 };
3833                         };
3834                 };
3835
3836                 cpu7-top-thermal {
3837                         polling-delay-passive = <250>;
3838                         polling-delay = <1000>;
3839
3840                         thermal-sensors = <&tsens0 10>;
3841
3842                         trips {
3843                                 cpu-crit {
3844                                         temperature = <110000>;
3845                                         hysteresis = <1000>;
3846                                         type = "critical";
3847                                 };
3848                         };
3849                 };
3850
3851                 cpu4-bottom-thermal {
3852                         polling-delay-passive = <250>;
3853                         polling-delay = <1000>;
3854
3855                         thermal-sensors = <&tsens0 11>;
3856
3857                         trips {
3858                                 cpu-crit {
3859                                         temperature = <110000>;
3860                                         hysteresis = <1000>;
3861                                         type = "critical";
3862                                 };
3863                         };
3864                 };
3865
3866                 cpu5-bottom-thermal {
3867                         polling-delay-passive = <250>;
3868                         polling-delay = <1000>;
3869
3870                         thermal-sensors = <&tsens0 12>;
3871
3872                         trips {
3873                                 cpu-crit {
3874                                         temperature = <110000>;
3875                                         hysteresis = <1000>;
3876                                         type = "critical";
3877                                 };
3878                         };
3879                 };
3880
3881                 cpu6-bottom-thermal {
3882                         polling-delay-passive = <250>;
3883                         polling-delay = <1000>;
3884
3885                         thermal-sensors = <&tsens0 13>;
3886
3887                         trips {
3888                                 cpu-crit {
3889                                         temperature = <110000>;
3890                                         hysteresis = <1000>;
3891                                         type = "critical";
3892                                 };
3893                         };
3894                 };
3895
3896                 cpu7-bottom-thermal {
3897                         polling-delay-passive = <250>;
3898                         polling-delay = <1000>;
3899
3900                         thermal-sensors = <&tsens0 14>;
3901
3902                         trips {
3903                                 cpu-crit {
3904                                         temperature = <110000>;
3905                                         hysteresis = <1000>;
3906                                         type = "critical";
3907                                 };
3908                         };
3909                 };
3910
3911                 aoss0-thermal {
3912                         polling-delay-passive = <250>;
3913                         polling-delay = <1000>;
3914
3915                         thermal-sensors = <&tsens0 0>;
3916
3917                         trips {
3918                                 trip-point0 {
3919                                         temperature = <90000>;
3920                                         hysteresis = <2000>;
3921                                         type = "hot";
3922                                 };
3923                         };
3924                 };
3925
3926                 cluster0-thermal {
3927                         polling-delay-passive = <250>;
3928                         polling-delay = <1000>;
3929
3930                         thermal-sensors = <&tsens0 5>;
3931
3932                         trips {
3933                                 cluster-crit {
3934                                         temperature = <110000>;
3935                                         hysteresis = <2000>;
3936                                         type = "critical";
3937                                 };
3938                         };
3939                 };
3940
3941                 cluster1-thermal {
3942                         polling-delay-passive = <250>;
3943                         polling-delay = <1000>;
3944
3945                         thermal-sensors = <&tsens0 6>;
3946
3947                         trips {
3948                                 cluster-crit {
3949                                         temperature = <110000>;
3950                                         hysteresis = <2000>;
3951                                         type = "critical";
3952                                 };
3953                         };
3954                 };
3955
3956                 gpu-top-thermal {
3957                         polling-delay-passive = <250>;
3958                         polling-delay = <1000>;
3959
3960                         thermal-sensors = <&tsens0 15>;
3961
3962                         cooling-maps {
3963                                 map0 {
3964                                         trip = <&gpu_top_alert0>;
3965                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3966                                 };
3967                         };
3968
3969                         trips {
3970                                 gpu_top_alert0: trip-point0 {
3971                                         temperature = <90000>;
3972                                         hysteresis = <2000>;
3973                                         type = "hot";
3974                                 };
3975                         };
3976                 };
3977
3978                 aoss1-thermal {
3979                         polling-delay-passive = <250>;
3980                         polling-delay = <1000>;
3981
3982                         thermal-sensors = <&tsens1 0>;
3983
3984                         trips {
3985                                 trip-point0 {
3986                                         temperature = <90000>;
3987                                         hysteresis = <2000>;
3988                                         type = "hot";
3989                                 };
3990                         };
3991                 };
3992
3993                 wlan-thermal {
3994                         polling-delay-passive = <250>;
3995                         polling-delay = <1000>;
3996
3997                         thermal-sensors = <&tsens1 1>;
3998
3999                         trips {
4000                                 trip-point0 {
4001                                         temperature = <90000>;
4002                                         hysteresis = <2000>;
4003                                         type = "hot";
4004                                 };
4005                         };
4006                 };
4007
4008                 video-thermal {
4009                         polling-delay-passive = <250>;
4010                         polling-delay = <1000>;
4011
4012                         thermal-sensors = <&tsens1 2>;
4013
4014                         trips {
4015                                 trip-point0 {
4016                                         temperature = <90000>;
4017                                         hysteresis = <2000>;
4018                                         type = "hot";
4019                                 };
4020                         };
4021                 };
4022
4023                 mem-thermal {
4024                         polling-delay-passive = <250>;
4025                         polling-delay = <1000>;
4026
4027                         thermal-sensors = <&tsens1 3>;
4028
4029                         trips {
4030                                 trip-point0 {
4031                                         temperature = <90000>;
4032                                         hysteresis = <2000>;
4033                                         type = "hot";
4034                                 };
4035                         };
4036                 };
4037
4038                 q6-hvx-thermal {
4039                         polling-delay-passive = <250>;
4040                         polling-delay = <1000>;
4041
4042                         thermal-sensors = <&tsens1 4>;
4043
4044                         trips {
4045                                 trip-point0 {
4046                                         temperature = <90000>;
4047                                         hysteresis = <2000>;
4048                                         type = "hot";
4049                                 };
4050                         };
4051                 };
4052
4053                 camera-thermal {
4054                         polling-delay-passive = <250>;
4055                         polling-delay = <1000>;
4056
4057                         thermal-sensors = <&tsens1 5>;
4058
4059                         trips {
4060                                 trip-point0 {
4061                                         temperature = <90000>;
4062                                         hysteresis = <2000>;
4063                                         type = "hot";
4064                                 };
4065                         };
4066                 };
4067
4068                 compute-thermal {
4069                         polling-delay-passive = <250>;
4070                         polling-delay = <1000>;
4071
4072                         thermal-sensors = <&tsens1 6>;
4073
4074                         trips {
4075                                 trip-point0 {
4076                                         temperature = <90000>;
4077                                         hysteresis = <2000>;
4078                                         type = "hot";
4079                                 };
4080                         };
4081                 };
4082
4083                 mdm-dsp-thermal {
4084                         polling-delay-passive = <250>;
4085                         polling-delay = <1000>;
4086
4087                         thermal-sensors = <&tsens1 7>;
4088
4089                         trips {
4090                                 trip-point0 {
4091                                         temperature = <90000>;
4092                                         hysteresis = <2000>;
4093                                         type = "hot";
4094                                 };
4095                         };
4096                 };
4097
4098                 npu-thermal {
4099                         polling-delay-passive = <250>;
4100                         polling-delay = <1000>;
4101
4102                         thermal-sensors = <&tsens1 8>;
4103
4104                         trips {
4105                                 trip-point0 {
4106                                         temperature = <90000>;
4107                                         hysteresis = <2000>;
4108                                         type = "hot";
4109                                 };
4110                         };
4111                 };
4112
4113                 gpu-bottom-thermal {
4114                         polling-delay-passive = <250>;
4115                         polling-delay = <1000>;
4116
4117                         thermal-sensors = <&tsens1 11>;
4118
4119                         cooling-maps {
4120                                 map0 {
4121                                         trip = <&gpu_bottom_alert0>;
4122                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4123                                 };
4124                         };
4125
4126                         trips {
4127                                 gpu_bottom_alert0: trip-point0 {
4128                                         temperature = <90000>;
4129                                         hysteresis = <2000>;
4130                                         type = "hot";
4131                                 };
4132                         };
4133                 };
4134         };
4135
4136         timer {
4137                 compatible = "arm,armv8-timer";
4138                 interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
4139                              <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
4140                              <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
4141                              <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
4142         };
4143 };