drivers/input/touchscreen/chipone_icn8505.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Driver for ChipOne icn8505 i2c touchscreen controller
   4  *
   5  * Copyright (c) 2015-2018 Red Hat Inc.
   6  *
   7  * Red Hat authors:
   8  * Hans de Goede <[email protected]>
   9  */
  10
  11 #include <asm/unaligned.h>
  12 #include <linux/acpi.h>
  13 #include <linux/crc32.h>
  14 #include <linux/delay.h>
  15 #include <linux/firmware.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/i2c.h>
  18 #include <linux/input.h>
  19 #include <linux/input/mt.h>
  20 #include <linux/input/touchscreen.h>
  21 #include <linux/module.h>
  22
  23 /* Normal operation mode defines */
  24 #define ICN8505_REG_ADDR_WIDTH          16
  25
  26 #define ICN8505_REG_POWER               0x0004
  27 #define ICN8505_REG_TOUCHDATA           0x1000
  28 #define ICN8505_REG_CONFIGDATA          0x8000
  29
  30 /* ICN8505_REG_POWER commands */
  31 #define ICN8505_POWER_ACTIVE            0x00
  32 #define ICN8505_POWER_MONITOR           0x01
  33 #define ICN8505_POWER_HIBERNATE         0x02
  34 /*
  35  * The Android driver uses these to turn on/off the charger filter, but the
  36  * filter is way too aggressive making e.g. onscreen keyboards unusable.
  37  */
  38 #define ICN8505_POWER_ENA_CHARGER_MODE  0x55
  39 #define ICN8505_POWER_DIS_CHARGER_MODE  0x66
  40
  41 #define ICN8505_MAX_TOUCHES             10
  42
  43 /* Programming mode defines */
  44 #define ICN8505_PROG_I2C_ADDR           0x30
  45 #define ICN8505_PROG_REG_ADDR_WIDTH     24
  46
  47 #define MAX_FW_UPLOAD_TRIES             3
  48
  49 struct icn8505_touch {
  50         u8 slot;
  51         u8 x[2];
  52         u8 y[2];
  53         u8 pressure;    /* Seems more like finger width then pressure really */
  54         u8 event;
  55 /* The difference between 2 and 3 is unclear */
  56 #define ICN8505_EVENT_NO_DATA   1 /* No finger seen yet since wakeup */
  57 #define ICN8505_EVENT_UPDATE1   2 /* New or updated coordinates */
  58 #define ICN8505_EVENT_UPDATE2   3 /* New or updated coordinates */
  59 #define ICN8505_EVENT_END       4 /* Finger lifted */
  60 } __packed;
  61
  62 struct icn8505_touch_data {
  63         u8 softbutton;
  64         u8 touch_count;
  65         struct icn8505_touch touches[ICN8505_MAX_TOUCHES];
  66 } __packed;
  67
  68 struct icn8505_data {
  69         struct i2c_client *client;
  70         struct input_dev *input;
  71         struct gpio_desc *wake_gpio;
  72         struct touchscreen_properties prop;
  73         char firmware_name[32];
  74 };
  75
  76 static int icn8505_read_xfer(struct i2c_client *client, u16 i2c_addr,
  77                              int reg_addr, int reg_addr_width,
  78                              void *data, int len, bool silent)
  79 {
  80         u8 buf[3];
  81         int i, ret;
  82         struct i2c_msg msg[2] = {
  83                 {
  84                         .addr = i2c_addr,
  85                         .buf = buf,
  86                         .len = reg_addr_width / 8,
  87                 },
  88                 {
  89                         .addr = i2c_addr,
  90                         .flags = I2C_M_RD,
  91                         .buf = data,
  92                         .len = len,
  93                 }
  94         };
  95
  96         for (i = 0; i < (reg_addr_width / 8); i++)
  97                 buf[i] = (reg_addr >> (reg_addr_width - (i + 1) * 8)) & 0xff;
  98
  99         ret = i2c_transfer(client->adapter, msg, 2);
 100         if (ret != ARRAY_SIZE(msg)) {
 101                 if (ret >= 0)
 102                         ret = -EIO;
 103                 if (!silent)
 104                         dev_err(&client->dev,
 105                                 "Error reading addr %#x reg %#x: %d\n",
 106                                 i2c_addr, reg_addr, ret);
 107                 return ret;
 108         }
 109
 110         return 0;
 111 }
 112
 113 static int icn8505_write_xfer(struct i2c_client *client, u16 i2c_addr,
 114                               int reg_addr, int reg_addr_width,
 115                               const void *data, int len, bool silent)
 116 {
 117         u8 buf[3 + 32]; /* 3 bytes for 24 bit reg-addr + 32 bytes max len */
 118         int i, ret;
 119         struct i2c_msg msg = {
 120                 .addr = i2c_addr,
 121                 .buf = buf,
 122                 .len = reg_addr_width / 8 + len,
 123         };
 124
 125         if (WARN_ON(len > 32))
 126                 return -EINVAL;
 127
 128         for (i = 0; i < (reg_addr_width / 8); i++)
 129                 buf[i] = (reg_addr >> (reg_addr_width - (i + 1) * 8)) & 0xff;
 130
 131         memcpy(buf + reg_addr_width / 8, data, len);
 132
 133         ret = i2c_transfer(client->adapter, &msg, 1);
 134         if (ret != 1) {
 135                 if (ret >= 0)
 136                         ret = -EIO;
 137                 if (!silent)
 138                         dev_err(&client->dev,
 139                                 "Error writing addr %#x reg %#x: %d\n",
 140                                 i2c_addr, reg_addr, ret);
 141                 return ret;
 142         }
 143
 144         return 0;
 145 }
 146
 147 static int icn8505_read_data(struct icn8505_data *icn8505, int reg,
 148                              void *buf, int len)
 149 {
 150         return icn8505_read_xfer(icn8505->client, icn8505->client->addr, reg,
 151                                  ICN8505_REG_ADDR_WIDTH, buf, len, false);
 152 }
 153
 154 static int icn8505_read_reg_silent(struct icn8505_data *icn8505, int reg)
 155 {
 156         u8 buf;
 157         int error;
 158
 159         error = icn8505_read_xfer(icn8505->client, icn8505->client->addr, reg,
 160                                   ICN8505_REG_ADDR_WIDTH, &buf, 1, true);
 161         if (error)
 162                 return error;
 163
 164         return buf;
 165 }
 166
 167 static int icn8505_write_reg(struct icn8505_data *icn8505, int reg, u8 val)
 168 {
 169         return icn8505_write_xfer(icn8505->client, icn8505->client->addr, reg,
 170                                   ICN8505_REG_ADDR_WIDTH, &val, 1, false);
 171 }
 172
 173 static int icn8505_read_prog_data(struct icn8505_data *icn8505, int reg,
 174                                   void *buf, int len)
 175 {
 176         return icn8505_read_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
 177                                  ICN8505_PROG_REG_ADDR_WIDTH, buf, len, false);
 178 }
 179
 180 static int icn8505_write_prog_data(struct icn8505_data *icn8505, int reg,
 181                                    const void *buf, int len)
 182 {
 183         return icn8505_write_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
 184                                   ICN8505_PROG_REG_ADDR_WIDTH, buf, len, false);
 185 }
 186
 187 static int icn8505_write_prog_reg(struct icn8505_data *icn8505, int reg, u8 val)
 188 {
 189         return icn8505_write_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
 190                                   ICN8505_PROG_REG_ADDR_WIDTH, &val, 1, false);
 191 }
 192
 193 /*
 194  * Note this function uses a number of magic register addresses and values,
 195  * there are deliberately no defines for these because the algorithm is taken
 196  * from the icn85xx Android driver and I do not want to make up possibly wrong
 197  * names for the addresses and/or values.
 198  */
 199 static int icn8505_try_fw_upload(struct icn8505_data *icn8505,
 200                                  const struct firmware *fw)
 201 {
 202         struct device *dev = &icn8505->client->dev;
 203         size_t offset, count;
 204         int error;
 205         u8 buf[4];
 206         u32 crc;
 207
 208         /* Put the controller in programming mode */
 209         error = icn8505_write_prog_reg(icn8505, 0xcc3355, 0x5a);
 210         if (error)
 211                 return error;
 212
 213         usleep_range(2000, 5000);
 214
 215         error = icn8505_write_prog_reg(icn8505, 0x040400, 0x01);
 216         if (error)
 217                 return error;
 218
 219         usleep_range(2000, 5000);
 220
 221         error = icn8505_read_prog_data(icn8505, 0x040002, buf, 1);
 222         if (error)
 223                 return error;
 224
 225         if (buf[0] != 0x85) {
 226                 dev_err(dev, "Failed to enter programming mode\n");
 227                 return -ENODEV;
 228         }
 229
 230         usleep_range(1000, 5000);
 231
 232         /* Enable CRC mode */
 233         error = icn8505_write_prog_reg(icn8505, 0x40028, 1);
 234         if (error)
 235                 return error;
 236
 237         /* Send the firmware to SRAM */
 238         for (offset = 0; offset < fw->size; offset += count) {
 239                 count = min_t(size_t, fw->size - offset, 32);
 240                 error = icn8505_write_prog_data(icn8505, offset,
 241                                               fw->data + offset, count);
 242                 if (error)
 243                         return error;
 244         }
 245
 246         /* Disable CRC mode */
 247         error = icn8505_write_prog_reg(icn8505, 0x40028, 0);
 248         if (error)
 249                 return error;
 250
 251         /* Get and check length and CRC */
 252         error = icn8505_read_prog_data(icn8505, 0x40034, buf, 2);
 253         if (error)
 254                 return error;
 255
 256         if (get_unaligned_le16(buf) != fw->size) {
 257                 dev_warn(dev, "Length mismatch after uploading fw\n");
 258                 return -EIO;
 259         }
 260
 261         error = icn8505_read_prog_data(icn8505, 0x4002c, buf, 4);
 262         if (error)
 263                 return error;
 264
 265         crc = crc32_be(0, fw->data, fw->size);
 266         if (get_unaligned_le32(buf) != crc) {
 267                 dev_warn(dev, "CRC mismatch after uploading fw\n");
 268                 return -EIO;
 269         }
 270
 271         /* Boot controller from SRAM */
 272         error = icn8505_write_prog_reg(icn8505, 0x40400, 0x03);
 273         if (error)
 274                 return error;
 275
 276         usleep_range(2000, 5000);
 277         return 0;
 278 }
 279
 280 static int icn8505_upload_fw(struct icn8505_data *icn8505)
 281 {
 282         struct device *dev = &icn8505->client->dev;
 283         const struct firmware *fw;
 284         int i, error;
 285
 286         /*
 287          * Always load the firmware, even if we don't need it at boot, we
 288          * we may need it at resume. Having loaded it once will make the
 289          * firmware class code cache it at suspend/resume.
 290          */
 291         error = firmware_request_platform(&fw, icn8505->firmware_name, dev);
 292         if (error) {
 293                 dev_err(dev, "Firmware request error %d\n", error);
 294                 return error;
 295         }
 296
 297         /* Check if the controller is not already up and running */
 298         if (icn8505_read_reg_silent(icn8505, 0x000a) == 0x85)
 299                 goto success;
 300
 301         for (i = 1; i <= MAX_FW_UPLOAD_TRIES; i++) {
 302                 error = icn8505_try_fw_upload(icn8505, fw);
 303                 if (!error)
 304                         goto success;
 305
 306                 dev_err(dev, "Failed to upload firmware: %d (attempt %d/%d)\n",
 307                         error, i, MAX_FW_UPLOAD_TRIES);
 308                 usleep_range(2000, 5000);
 309         }
 310
 311 success:
 312         release_firmware(fw);
 313         return error;
 314 }
 315
 316 static bool icn8505_touch_active(u8 event)
 317 {
 318         return event == ICN8505_EVENT_UPDATE1 ||
 319                event == ICN8505_EVENT_UPDATE2;
 320 }
 321
 322 static irqreturn_t icn8505_irq(int irq, void *dev_id)
 323 {
 324         struct icn8505_data *icn8505 = dev_id;
 325         struct device *dev = &icn8505->client->dev;
 326         struct icn8505_touch_data touch_data;
 327         int i, error;
 328
 329         error = icn8505_read_data(icn8505, ICN8505_REG_TOUCHDATA,
 330                                   &touch_data, sizeof(touch_data));
 331         if (error) {
 332                 dev_err(dev, "Error reading touch data: %d\n", error);
 333                 return IRQ_HANDLED;
 334         }
 335
 336         if (touch_data.touch_count > ICN8505_MAX_TOUCHES) {
 337                 dev_warn(dev, "Too many touches %d > %d\n",
 338                          touch_data.touch_count, ICN8505_MAX_TOUCHES);
 339                 touch_data.touch_count = ICN8505_MAX_TOUCHES;
 340         }
 341
 342         for (i = 0; i < touch_data.touch_count; i++) {
 343                 struct icn8505_touch *touch = &touch_data.touches[i];
 344                 bool act = icn8505_touch_active(touch->event);
 345
 346                 input_mt_slot(icn8505->input, touch->slot);
 347                 input_mt_report_slot_state(icn8505->input, MT_TOOL_FINGER, act);
 348                 if (!act)
 349                         continue;
 350
 351                 touchscreen_report_pos(icn8505->input, &icn8505->prop,
 352                                        get_unaligned_le16(touch->x),
 353                                        get_unaligned_le16(touch->y),
 354                                        true);
 355         }
 356
 357         input_mt_sync_frame(icn8505->input);
 358         input_report_key(icn8505->input, KEY_LEFTMETA,
 359                          touch_data.softbutton == 1);
 360         input_sync(icn8505->input);
 361
 362         return IRQ_HANDLED;
 363 }
 364
 365 static int icn8505_probe_acpi(struct icn8505_data *icn8505, struct device *dev)
 366 {
 367         const char *subsys;
 368         int error;
 369
 370         subsys = acpi_get_subsystem_id(ACPI_HANDLE(dev));
 371         error = PTR_ERR_OR_ZERO(subsys);
 372         if (error == -ENODATA)
 373                 subsys = "unknown";
 374         else if (error)
 375                 return error;
 376
 377         snprintf(icn8505->firmware_name, sizeof(icn8505->firmware_name),
 378                  "chipone/icn8505-%s.fw", subsys);
 379
 380         kfree_const(subsys);
 381         return 0;
 382 }
 383
 384 static int icn8505_probe(struct i2c_client *client)
 385 {
 386         struct device *dev = &client->dev;
 387         struct icn8505_data *icn8505;
 388         struct input_dev *input;
 389         __le16 resolution[2];
 390         int error;
 391
 392         if (!client->irq) {
 393                 dev_err(dev, "No irq specified\n");
 394                 return -EINVAL;
 395         }
 396
 397         icn8505 = devm_kzalloc(dev, sizeof(*icn8505), GFP_KERNEL);
 398         if (!icn8505)
 399                 return -ENOMEM;
 400
 401         input = devm_input_allocate_device(dev);
 402         if (!input)
 403                 return -ENOMEM;
 404
 405         input->name = client->name;
 406         input->id.bustype = BUS_I2C;
 407
 408         input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
 409         input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
 410         input_set_capability(input, EV_KEY, KEY_LEFTMETA);
 411
 412         icn8505->client = client;
 413         icn8505->input = input;
 414         input_set_drvdata(input, icn8505);
 415
 416         error = icn8505_probe_acpi(icn8505, dev);
 417         if (error)
 418                 return error;
 419
 420         error = icn8505_upload_fw(icn8505);
 421         if (error)
 422                 return error;
 423
 424         error = icn8505_read_data(icn8505, ICN8505_REG_CONFIGDATA,
 425                                 resolution, sizeof(resolution));
 426         if (error) {
 427                 dev_err(dev, "Error reading resolution: %d\n", error);
 428                 return error;
 429         }
 430
 431         input_set_abs_params(input, ABS_MT_POSITION_X, 0,
 432                              le16_to_cpu(resolution[0]) - 1, 0, 0);
 433         input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
 434                              le16_to_cpu(resolution[1]) - 1, 0, 0);
 435
 436         touchscreen_parse_properties(input, true, &icn8505->prop);
 437         if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
 438             !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
 439                 dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
 440                 return -EINVAL;
 441         }
 442
 443         error = input_mt_init_slots(input, ICN8505_MAX_TOUCHES,
 444                                   INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
 445         if (error)
 446                 return error;
 447
 448         error = devm_request_threaded_irq(dev, client->irq, NULL, icn8505_irq,
 449                                         IRQF_ONESHOT, client->name, icn8505);
 450         if (error) {
 451                 dev_err(dev, "Error requesting irq: %d\n", error);
 452                 return error;
 453         }
 454
 455         error = input_register_device(input);
 456         if (error)
 457                 return error;
 458
 459         i2c_set_clientdata(client, icn8505);
 460         return 0;
 461 }
 462
 463 static int icn8505_suspend(struct device *dev)
 464 {
 465         struct icn8505_data *icn8505 = i2c_get_clientdata(to_i2c_client(dev));
 466
 467         disable_irq(icn8505->client->irq);
 468
 469         icn8505_write_reg(icn8505, ICN8505_REG_POWER, ICN8505_POWER_HIBERNATE);
 470
 471         return 0;
 472 }
 473
 474 static int icn8505_resume(struct device *dev)
 475 {
 476         struct icn8505_data *icn8505 = i2c_get_clientdata(to_i2c_client(dev));
 477         int error;
 478
 479         error = icn8505_upload_fw(icn8505);
 480         if (error)
 481                 return error;
 482
 483         enable_irq(icn8505->client->irq);
 484         return 0;
 485 }
 486
 487 static DEFINE_SIMPLE_DEV_PM_OPS(icn8505_pm_ops, icn8505_suspend, icn8505_resume);
 488
 489 static const struct acpi_device_id icn8505_acpi_match[] = {
 490         { "CHPN0001" },
 491         { }
 492 };
 493 MODULE_DEVICE_TABLE(acpi, icn8505_acpi_match);
 494
 495 static struct i2c_driver icn8505_driver = {
 496         .driver = {
 497                 .name   = "chipone_icn8505",
 498                 .pm     = pm_sleep_ptr(&icn8505_pm_ops),
 499                 .acpi_match_table = icn8505_acpi_match,
 500         },
 501         .probe = icn8505_probe,
 502 };
 503
 504 module_i2c_driver(icn8505_driver);
 505
 506 MODULE_DESCRIPTION("ChipOne icn8505 I2C Touchscreen Driver");
 507 MODULE_AUTHOR("Hans de Goede <[email protected]>");
 508 MODULE_LICENSE("GPL");