drivers/input/touchscreen/chipone_icn8505.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Driver for ChipOne icn8505 i2c touchscreen controller
   4  *
   5  * Copyright (c) 2015-2018 Red Hat Inc.
   6  *
   7  * Red Hat authors:
   8  * Hans de Goede <[email protected]>
   9  */
  10
  11 #include <linux/unaligned.h>
  12 #include <linux/acpi.h>
  13 #include <linux/crc32.h>
  14 #include <linux/delay.h>
  15 #include <linux/firmware.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/i2c.h>
  18 #include <linux/input.h>
  19 #include <linux/input/mt.h>
  20 #include <linux/input/touchscreen.h>
  21 #include <linux/module.h>
  22
  23 /* Normal operation mode defines */
  24 #define ICN8505_REG_ADDR_WIDTH          16
  25
  26 #define ICN8505_REG_POWER               0x0004
  27 #define ICN8505_REG_TOUCHDATA           0x1000
  28 #define ICN8505_REG_CONFIGDATA          0x8000
  29
  30 /* ICN8505_REG_POWER commands */
  31 #define ICN8505_POWER_ACTIVE            0x00
  32 #define ICN8505_POWER_MONITOR           0x01
  33 #define ICN8505_POWER_HIBERNATE         0x02
  34 /*
  35  * The Android driver uses these to turn on/off the charger filter, but the
  36  * filter is way too aggressive making e.g. onscreen keyboards unusable.
  37  */
  38 #define ICN8505_POWER_ENA_CHARGER_MODE  0x55
  39 #define ICN8505_POWER_DIS_CHARGER_MODE  0x66
  40
  41 #define ICN8505_MAX_TOUCHES             10
  42
  43 /* Programming mode defines */
  44 #define ICN8505_PROG_I2C_ADDR           0x30
  45 #define ICN8505_PROG_REG_ADDR_WIDTH     24
  46
  47 #define MAX_FW_UPLOAD_TRIES             3
  48
  49 struct icn8505_touch {
  50         u8 slot;
  51         u8 x[2];
  52         u8 y[2];
  53         u8 pressure;    /* Seems more like finger width then pressure really */
  54         u8 event;
  55 /* The difference between 2 and 3 is unclear */
  56 #define ICN8505_EVENT_NO_DATA   1 /* No finger seen yet since wakeup */
  57 #define ICN8505_EVENT_UPDATE1   2 /* New or updated coordinates */
  58 #define ICN8505_EVENT_UPDATE2   3 /* New or updated coordinates */
  59 #define ICN8505_EVENT_END       4 /* Finger lifted */
  60 } __packed;
  61
  62 struct icn8505_touch_data {
  63         u8 softbutton;
  64         u8 touch_count;
  65         struct icn8505_touch touches[ICN8505_MAX_TOUCHES];
  66 } __packed;
  67
  68 struct icn8505_data {
  69         struct i2c_client *client;
  70         struct input_dev *input;
  71         struct touchscreen_properties prop;
  72         char firmware_name[32];
  73 };
  74
  75 static int icn8505_read_xfer(struct i2c_client *client, u16 i2c_addr,
  76                              int reg_addr, int reg_addr_width,
  77                              void *data, int len, bool silent)
  78 {
  79         u8 buf[3];
  80         int i, ret;
  81         struct i2c_msg msg[2] = {
  82                 {
  83                         .addr = i2c_addr,
  84                         .buf = buf,
  85                         .len = reg_addr_width / 8,
  86                 },
  87                 {
  88                         .addr = i2c_addr,
  89                         .flags = I2C_M_RD,
  90                         .buf = data,
  91                         .len = len,
  92                 }
  93         };
  94
  95         for (i = 0; i < (reg_addr_width / 8); i++)
  96                 buf[i] = (reg_addr >> (reg_addr_width - (i + 1) * 8)) & 0xff;
  97
  98         ret = i2c_transfer(client->adapter, msg, 2);
  99         if (ret != ARRAY_SIZE(msg)) {
 100                 if (ret >= 0)
 101                         ret = -EIO;
 102                 if (!silent)
 103                         dev_err(&client->dev,
 104                                 "Error reading addr %#x reg %#x: %d\n",
 105                                 i2c_addr, reg_addr, ret);
 106                 return ret;
 107         }
 108
 109         return 0;
 110 }
 111
 112 static int icn8505_write_xfer(struct i2c_client *client, u16 i2c_addr,
 113                               int reg_addr, int reg_addr_width,
 114                               const void *data, int len, bool silent)
 115 {
 116         u8 buf[3 + 32]; /* 3 bytes for 24 bit reg-addr + 32 bytes max len */
 117         int i, ret;
 118         struct i2c_msg msg = {
 119                 .addr = i2c_addr,
 120                 .buf = buf,
 121                 .len = reg_addr_width / 8 + len,
 122         };
 123
 124         if (WARN_ON(len > 32))
 125                 return -EINVAL;
 126
 127         for (i = 0; i < (reg_addr_width / 8); i++)
 128                 buf[i] = (reg_addr >> (reg_addr_width - (i + 1) * 8)) & 0xff;
 129
 130         memcpy(buf + reg_addr_width / 8, data, len);
 131
 132         ret = i2c_transfer(client->adapter, &msg, 1);
 133         if (ret != 1) {
 134                 if (ret >= 0)
 135                         ret = -EIO;
 136                 if (!silent)
 137                         dev_err(&client->dev,
 138                                 "Error writing addr %#x reg %#x: %d\n",
 139                                 i2c_addr, reg_addr, ret);
 140                 return ret;
 141         }
 142
 143         return 0;
 144 }
 145
 146 static int icn8505_read_data(struct icn8505_data *icn8505, int reg,
 147                              void *buf, int len)
 148 {
 149         return icn8505_read_xfer(icn8505->client, icn8505->client->addr, reg,
 150                                  ICN8505_REG_ADDR_WIDTH, buf, len, false);
 151 }
 152
 153 static int icn8505_read_reg_silent(struct icn8505_data *icn8505, int reg)
 154 {
 155         u8 buf;
 156         int error;
 157
 158         error = icn8505_read_xfer(icn8505->client, icn8505->client->addr, reg,
 159                                   ICN8505_REG_ADDR_WIDTH, &buf, 1, true);
 160         if (error)
 161                 return error;
 162
 163         return buf;
 164 }
 165
 166 static int icn8505_write_reg(struct icn8505_data *icn8505, int reg, u8 val)
 167 {
 168         return icn8505_write_xfer(icn8505->client, icn8505->client->addr, reg,
 169                                   ICN8505_REG_ADDR_WIDTH, &val, 1, false);
 170 }
 171
 172 static int icn8505_read_prog_data(struct icn8505_data *icn8505, int reg,
 173                                   void *buf, int len)
 174 {
 175         return icn8505_read_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
 176                                  ICN8505_PROG_REG_ADDR_WIDTH, buf, len, false);
 177 }
 178
 179 static int icn8505_write_prog_data(struct icn8505_data *icn8505, int reg,
 180                                    const void *buf, int len)
 181 {
 182         return icn8505_write_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
 183                                   ICN8505_PROG_REG_ADDR_WIDTH, buf, len, false);
 184 }
 185
 186 static int icn8505_write_prog_reg(struct icn8505_data *icn8505, int reg, u8 val)
 187 {
 188         return icn8505_write_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
 189                                   ICN8505_PROG_REG_ADDR_WIDTH, &val, 1, false);
 190 }
 191
 192 /*
 193  * Note this function uses a number of magic register addresses and values,
 194  * there are deliberately no defines for these because the algorithm is taken
 195  * from the icn85xx Android driver and I do not want to make up possibly wrong
 196  * names for the addresses and/or values.
 197  */
 198 static int icn8505_try_fw_upload(struct icn8505_data *icn8505,
 199                                  const struct firmware *fw)
 200 {
 201         struct device *dev = &icn8505->client->dev;
 202         size_t offset, count;
 203         int error;
 204         u8 buf[4];
 205         u32 crc;
 206
 207         /* Put the controller in programming mode */
 208         error = icn8505_write_prog_reg(icn8505, 0xcc3355, 0x5a);
 209         if (error)
 210                 return error;
 211
 212         usleep_range(2000, 5000);
 213
 214         error = icn8505_write_prog_reg(icn8505, 0x040400, 0x01);
 215         if (error)
 216                 return error;
 217
 218         usleep_range(2000, 5000);
 219
 220         error = icn8505_read_prog_data(icn8505, 0x040002, buf, 1);
 221         if (error)
 222                 return error;
 223
 224         if (buf[0] != 0x85) {
 225                 dev_err(dev, "Failed to enter programming mode\n");
 226                 return -ENODEV;
 227         }
 228
 229         usleep_range(1000, 5000);
 230
 231         /* Enable CRC mode */
 232         error = icn8505_write_prog_reg(icn8505, 0x40028, 1);
 233         if (error)
 234                 return error;
 235
 236         /* Send the firmware to SRAM */
 237         for (offset = 0; offset < fw->size; offset += count) {
 238                 count = min_t(size_t, fw->size - offset, 32);
 239                 error = icn8505_write_prog_data(icn8505, offset,
 240                                               fw->data + offset, count);
 241                 if (error)
 242                         return error;
 243         }
 244
 245         /* Disable CRC mode */
 246         error = icn8505_write_prog_reg(icn8505, 0x40028, 0);
 247         if (error)
 248                 return error;
 249
 250         /* Get and check length and CRC */
 251         error = icn8505_read_prog_data(icn8505, 0x40034, buf, 2);
 252         if (error)
 253                 return error;
 254
 255         if (get_unaligned_le16(buf) != fw->size) {
 256                 dev_warn(dev, "Length mismatch after uploading fw\n");
 257                 return -EIO;
 258         }
 259
 260         error = icn8505_read_prog_data(icn8505, 0x4002c, buf, 4);
 261         if (error)
 262                 return error;
 263
 264         crc = crc32_be(0, fw->data, fw->size);
 265         if (get_unaligned_le32(buf) != crc) {
 266                 dev_warn(dev, "CRC mismatch after uploading fw\n");
 267                 return -EIO;
 268         }
 269
 270         /* Boot controller from SRAM */
 271         error = icn8505_write_prog_reg(icn8505, 0x40400, 0x03);
 272         if (error)
 273                 return error;
 274
 275         usleep_range(2000, 5000);
 276         return 0;
 277 }
 278
 279 static int icn8505_upload_fw(struct icn8505_data *icn8505)
 280 {
 281         struct device *dev = &icn8505->client->dev;
 282         const struct firmware *fw;
 283         int i, error;
 284
 285         /*
 286          * Always load the firmware, even if we don't need it at boot, we
 287          * we may need it at resume. Having loaded it once will make the
 288          * firmware class code cache it at suspend/resume.
 289          */
 290         error = firmware_request_platform(&fw, icn8505->firmware_name, dev);
 291         if (error) {
 292                 dev_err(dev, "Firmware request error %d\n", error);
 293                 return error;
 294         }
 295
 296         /* Check if the controller is not already up and running */
 297         if (icn8505_read_reg_silent(icn8505, 0x000a) == 0x85)
 298                 goto success;
 299
 300         for (i = 1; i <= MAX_FW_UPLOAD_TRIES; i++) {
 301                 error = icn8505_try_fw_upload(icn8505, fw);
 302                 if (!error)
 303                         goto success;
 304
 305                 dev_err(dev, "Failed to upload firmware: %d (attempt %d/%d)\n",
 306                         error, i, MAX_FW_UPLOAD_TRIES);
 307                 usleep_range(2000, 5000);
 308         }
 309
 310 success:
 311         release_firmware(fw);
 312         return error;
 313 }
 314
 315 static bool icn8505_touch_active(u8 event)
 316 {
 317         return event == ICN8505_EVENT_UPDATE1 ||
 318                event == ICN8505_EVENT_UPDATE2;
 319 }
 320
 321 static irqreturn_t icn8505_irq(int irq, void *dev_id)
 322 {
 323         struct icn8505_data *icn8505 = dev_id;
 324         struct device *dev = &icn8505->client->dev;
 325         struct icn8505_touch_data touch_data;
 326         int i, error;
 327
 328         error = icn8505_read_data(icn8505, ICN8505_REG_TOUCHDATA,
 329                                   &touch_data, sizeof(touch_data));
 330         if (error) {
 331                 dev_err(dev, "Error reading touch data: %d\n", error);
 332                 return IRQ_HANDLED;
 333         }
 334
 335         if (touch_data.touch_count > ICN8505_MAX_TOUCHES) {
 336                 dev_warn(dev, "Too many touches %d > %d\n",
 337                          touch_data.touch_count, ICN8505_MAX_TOUCHES);
 338                 touch_data.touch_count = ICN8505_MAX_TOUCHES;
 339         }
 340
 341         for (i = 0; i < touch_data.touch_count; i++) {
 342                 struct icn8505_touch *touch = &touch_data.touches[i];
 343                 bool act = icn8505_touch_active(touch->event);
 344
 345                 input_mt_slot(icn8505->input, touch->slot);
 346                 input_mt_report_slot_state(icn8505->input, MT_TOOL_FINGER, act);
 347                 if (!act)
 348                         continue;
 349
 350                 touchscreen_report_pos(icn8505->input, &icn8505->prop,
 351                                        get_unaligned_le16(touch->x),
 352                                        get_unaligned_le16(touch->y),
 353                                        true);
 354         }
 355
 356         input_mt_sync_frame(icn8505->input);
 357         input_report_key(icn8505->input, KEY_LEFTMETA,
 358                          touch_data.softbutton == 1);
 359         input_sync(icn8505->input);
 360
 361         return IRQ_HANDLED;
 362 }
 363
 364 static int icn8505_probe_acpi(struct icn8505_data *icn8505, struct device *dev)
 365 {
 366         const char *subsys;
 367         int error;
 368
 369         subsys = acpi_get_subsystem_id(ACPI_HANDLE(dev));
 370         error = PTR_ERR_OR_ZERO(subsys);
 371         if (error == -ENODATA)
 372                 subsys = "unknown";
 373         else if (error)
 374                 return error;
 375
 376         snprintf(icn8505->firmware_name, sizeof(icn8505->firmware_name),
 377                  "chipone/icn8505-%s.fw", subsys);
 378
 379         kfree_const(subsys);
 380         return 0;
 381 }
 382
 383 static int icn8505_probe(struct i2c_client *client)
 384 {
 385         struct device *dev = &client->dev;
 386         struct icn8505_data *icn8505;
 387         struct input_dev *input;
 388         __le16 resolution[2];
 389         int error;
 390
 391         if (!client->irq) {
 392                 dev_err(dev, "No irq specified\n");
 393                 return -EINVAL;
 394         }
 395
 396         icn8505 = devm_kzalloc(dev, sizeof(*icn8505), GFP_KERNEL);
 397         if (!icn8505)
 398                 return -ENOMEM;
 399
 400         input = devm_input_allocate_device(dev);
 401         if (!input)
 402                 return -ENOMEM;
 403
 404         input->name = client->name;
 405         input->id.bustype = BUS_I2C;
 406
 407         input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
 408         input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
 409         input_set_capability(input, EV_KEY, KEY_LEFTMETA);
 410
 411         icn8505->client = client;
 412         icn8505->input = input;
 413         input_set_drvdata(input, icn8505);
 414
 415         error = icn8505_probe_acpi(icn8505, dev);
 416         if (error)
 417                 return error;
 418
 419         error = icn8505_upload_fw(icn8505);
 420         if (error)
 421                 return error;
 422
 423         error = icn8505_read_data(icn8505, ICN8505_REG_CONFIGDATA,
 424                                 resolution, sizeof(resolution));
 425         if (error) {
 426                 dev_err(dev, "Error reading resolution: %d\n", error);
 427                 return error;
 428         }
 429
 430         input_set_abs_params(input, ABS_MT_POSITION_X, 0,
 431                              le16_to_cpu(resolution[0]) - 1, 0, 0);
 432         input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
 433                              le16_to_cpu(resolution[1]) - 1, 0, 0);
 434
 435         touchscreen_parse_properties(input, true, &icn8505->prop);
 436         if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
 437             !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
 438                 dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
 439                 return -EINVAL;
 440         }
 441
 442         error = input_mt_init_slots(input, ICN8505_MAX_TOUCHES,
 443                                   INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
 444         if (error)
 445                 return error;
 446
 447         error = devm_request_threaded_irq(dev, client->irq, NULL, icn8505_irq,
 448                                         IRQF_ONESHOT, client->name, icn8505);
 449         if (error) {
 450                 dev_err(dev, "Error requesting irq: %d\n", error);
 451                 return error;
 452         }
 453
 454         error = input_register_device(input);
 455         if (error)
 456                 return error;
 457
 458         i2c_set_clientdata(client, icn8505);
 459         return 0;
 460 }
 461
 462 static int icn8505_suspend(struct device *dev)
 463 {
 464         struct icn8505_data *icn8505 = i2c_get_clientdata(to_i2c_client(dev));
 465
 466         disable_irq(icn8505->client->irq);
 467
 468         icn8505_write_reg(icn8505, ICN8505_REG_POWER, ICN8505_POWER_HIBERNATE);
 469
 470         return 0;
 471 }
 472
 473 static int icn8505_resume(struct device *dev)
 474 {
 475         struct icn8505_data *icn8505 = i2c_get_clientdata(to_i2c_client(dev));
 476         int error;
 477
 478         error = icn8505_upload_fw(icn8505);
 479         if (error)
 480                 return error;
 481
 482         enable_irq(icn8505->client->irq);
 483         return 0;
 484 }
 485
 486 static DEFINE_SIMPLE_DEV_PM_OPS(icn8505_pm_ops, icn8505_suspend, icn8505_resume);
 487
 488 static const struct acpi_device_id icn8505_acpi_match[] = {
 489         { "CHPN0001" },
 490         { }
 491 };
 492 MODULE_DEVICE_TABLE(acpi, icn8505_acpi_match);
 493
 494 static struct i2c_driver icn8505_driver = {
 495         .driver = {
 496                 .name   = "chipone_icn8505",
 497                 .pm     = pm_sleep_ptr(&icn8505_pm_ops),
 498                 .acpi_match_table = icn8505_acpi_match,
 499         },
 500         .probe = icn8505_probe,
 501 };
 502
 503 module_i2c_driver(icn8505_driver);
 504
 505 MODULE_DESCRIPTION("ChipOne icn8505 I2C Touchscreen Driver");
 506 MODULE_AUTHOR("Hans de Goede <[email protected]>");
 507 MODULE_LICENSE("GPL");