drivers/tty/serial/earlycon.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2014 Linaro Ltd.
   4  * Author: Rob Herring <[email protected]>
   5  *
   6  * Based on 8250 earlycon:
   7  * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
   8  *      Bjorn Helgaas <[email protected]>
   9  */
  10
  11 #define pr_fmt(fmt)     KBUILD_MODNAME ": " fmt
  12
  13 #include <linux/console.h>
  14 #include <linux/kernel.h>
  15 #include <linux/init.h>
  16 #include <linux/io.h>
  17 #include <linux/serial_core.h>
  18 #include <linux/sizes.h>
  19 #include <linux/of.h>
  20 #include <linux/of_fdt.h>
  21 #include <linux/acpi.h>
  22
  23 #ifdef CONFIG_FIX_EARLYCON_MEM
  24 #include <asm/fixmap.h>
  25 #endif
  26
  27 #include <asm/serial.h>
  28
  29 static struct console early_con = {
  30         .name =         "uart",         /* fixed up at earlycon registration */
  31         .flags =        CON_PRINTBUFFER | CON_BOOT,
  32         .index =        0,
  33 };
  34
  35 static struct earlycon_device early_console_dev = {
  36         .con = &early_con,
  37 };
  38
  39 static void __iomem * __init earlycon_map(resource_size_t paddr, size_t size)
  40 {
  41         void __iomem *base;
  42 #ifdef CONFIG_FIX_EARLYCON_MEM
  43         set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr & PAGE_MASK);
  44         base = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
  45         base += paddr & ~PAGE_MASK;
  46 #else
  47         base = ioremap(paddr, size);
  48 #endif
  49         if (!base)
  50                 pr_err("%s: Couldn't map %pa\n", __func__, &paddr);
  51
  52         return base;
  53 }
  54
  55 static void __init earlycon_init(struct earlycon_device *device,
  56                                  const char *name)
  57 {
  58         struct console *earlycon = device->con;
  59         const char *s;
  60         size_t len;
  61
  62         /* scan backwards from end of string for first non-numeral */
  63         for (s = name + strlen(name);
  64              s > name && s[-1] >= '0' && s[-1] <= '9';
  65              s--)
  66                 ;
  67         if (*s)
  68                 earlycon->index = simple_strtoul(s, NULL, 10);
  69         len = s - name;
  70         strlcpy(earlycon->name, name, min(len + 1, sizeof(earlycon->name)));
  71         earlycon->data = &early_console_dev;
  72 }
  73
  74 static void __init earlycon_print_info(struct earlycon_device *device)
  75 {
  76         struct console *earlycon = device->con;
  77         struct uart_port *port = &device->port;
  78
  79         if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 ||
  80             port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE)
  81                 pr_info("%s%d at MMIO%s %pa (options '%s')\n",
  82                         earlycon->name, earlycon->index,
  83                         (port->iotype == UPIO_MEM) ? "" :
  84                         (port->iotype == UPIO_MEM16) ? "16" :
  85                         (port->iotype == UPIO_MEM32) ? "32" : "32be",
  86                         &port->mapbase, device->options);
  87         else
  88                 pr_info("%s%d at I/O port 0x%lx (options '%s')\n",
  89                         earlycon->name, earlycon->index,
  90                         port->iobase, device->options);
  91 }
  92
  93 static int __init parse_options(struct earlycon_device *device, char *options)
  94 {
  95         struct uart_port *port = &device->port;
  96         int length;
  97         resource_size_t addr;
  98
  99         if (uart_parse_earlycon(options, &port->iotype, &addr, &options))
 100                 return -EINVAL;
 101
 102         switch (port->iotype) {
 103         case UPIO_MEM:
 104                 port->mapbase = addr;
 105                 break;
 106         case UPIO_MEM16:
 107                 port->regshift = 1;
 108                 port->mapbase = addr;
 109                 break;
 110         case UPIO_MEM32:
 111         case UPIO_MEM32BE:
 112                 port->regshift = 2;
 113                 port->mapbase = addr;
 114                 break;
 115         case UPIO_PORT:
 116                 port->iobase = addr;
 117                 break;
 118         default:
 119                 return -EINVAL;
 120         }
 121
 122         if (options) {
 123                 device->baud = simple_strtoul(options, NULL, 0);
 124                 length = min(strcspn(options, " ") + 1,
 125                              (size_t)(sizeof(device->options)));
 126                 strlcpy(device->options, options, length);
 127         }
 128
 129         return 0;
 130 }
 131
 132 static int __init register_earlycon(char *buf, const struct earlycon_id *match)
 133 {
 134         int err;
 135         struct uart_port *port = &early_console_dev.port;
 136
 137         /* On parsing error, pass the options buf to the setup function */
 138         if (buf && !parse_options(&early_console_dev, buf))
 139                 buf = NULL;
 140
 141         spin_lock_init(&port->lock);
 142         port->uartclk = BASE_BAUD * 16;
 143         if (port->mapbase)
 144                 port->membase = earlycon_map(port->mapbase, 64);
 145
 146         earlycon_init(&early_console_dev, match->name);
 147         err = match->setup(&early_console_dev, buf);
 148         earlycon_print_info(&early_console_dev);
 149         if (err < 0)
 150                 return err;
 151         if (!early_console_dev.con->write)
 152                 return -ENODEV;
 153
 154         register_console(early_console_dev.con);
 155         return 0;
 156 }
 157
 158 /**
 159  *      setup_earlycon - match and register earlycon console
 160  *      @buf:   earlycon param string
 161  *
 162  *      Registers the earlycon console matching the earlycon specified
 163  *      in the param string @buf. Acceptable param strings are of the form
 164  *         <name>,io|mmio|mmio32|mmio32be,<addr>,<options>
 165  *         <name>,0x<addr>,<options>
 166  *         <name>,<options>
 167  *         <name>
 168  *
 169  *      Only for the third form does the earlycon setup() method receive the
 170  *      <options> string in the 'options' parameter; all other forms set
 171  *      the parameter to NULL.
 172  *
 173  *      Returns 0 if an attempt to register the earlycon was made,
 174  *      otherwise negative error code
 175  */
 176 int __init setup_earlycon(char *buf)
 177 {
 178         const struct earlycon_id **p_match;
 179         bool empty_compatible = true;
 180
 181         if (!buf || !buf[0])
 182                 return -EINVAL;
 183
 184         if (early_con.flags & CON_ENABLED)
 185                 return -EALREADY;
 186
 187 again:
 188         for (p_match = __earlycon_table; p_match < __earlycon_table_end;
 189              p_match++) {
 190                 const struct earlycon_id *match = *p_match;
 191                 size_t len = strlen(match->name);
 192
 193                 if (strncmp(buf, match->name, len))
 194                         continue;
 195
 196                 /* prefer entries with empty compatible */
 197                 if (empty_compatible && *match->compatible)
 198                         continue;
 199
 200                 if (buf[len]) {
 201                         if (buf[len] != ',')
 202                                 continue;
 203                         buf += len + 1;
 204                 } else
 205                         buf = NULL;
 206
 207                 return register_earlycon(buf, match);
 208         }
 209
 210         if (empty_compatible) {
 211                 empty_compatible = false;
 212                 goto again;
 213         }
 214
 215         return -ENOENT;
 216 }
 217
 218 /*
 219  * This defers the initialization of the early console until after ACPI has
 220  * been initialized.
 221  */
 222 bool earlycon_acpi_spcr_enable __initdata;
 223
 224 /* early_param wrapper for setup_earlycon() */
 225 static int __init param_setup_earlycon(char *buf)
 226 {
 227         int err;
 228
 229         /* Just 'earlycon' is a valid param for devicetree and ACPI SPCR. */
 230         if (!buf || !buf[0]) {
 231                 if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
 232                         earlycon_acpi_spcr_enable = true;
 233                         return 0;
 234                 } else if (!buf) {
 235                         return early_init_dt_scan_chosen_stdout();
 236                 }
 237         }
 238
 239         err = setup_earlycon(buf);
 240         if (err == -ENOENT || err == -EALREADY)
 241                 return 0;
 242         return err;
 243 }
 244 early_param("earlycon", param_setup_earlycon);
 245
 246 #ifdef CONFIG_OF_EARLY_FLATTREE
 247
 248 int __init of_setup_earlycon(const struct earlycon_id *match,
 249                              unsigned long node,
 250                              const char *options)
 251 {
 252         int err;
 253         struct uart_port *port = &early_console_dev.port;
 254         const __be32 *val;
 255         bool big_endian;
 256         u64 addr;
 257
 258         spin_lock_init(&port->lock);
 259         port->iotype = UPIO_MEM;
 260         addr = of_flat_dt_translate_address(node);
 261         if (addr == OF_BAD_ADDR) {
 262                 pr_warn("[%s] bad address\n", match->name);
 263                 return -ENXIO;
 264         }
 265         port->mapbase = addr;
 266
 267         val = of_get_flat_dt_prop(node, "reg-offset", NULL);
 268         if (val)
 269                 port->mapbase += be32_to_cpu(*val);
 270         port->membase = earlycon_map(port->mapbase, SZ_4K);
 271
 272         val = of_get_flat_dt_prop(node, "reg-shift", NULL);
 273         if (val)
 274                 port->regshift = be32_to_cpu(*val);
 275         big_endian = of_get_flat_dt_prop(node, "big-endian", NULL) != NULL ||
 276                 (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) &&
 277                  of_get_flat_dt_prop(node, "native-endian", NULL) != NULL);
 278         val = of_get_flat_dt_prop(node, "reg-io-width", NULL);
 279         if (val) {
 280                 switch (be32_to_cpu(*val)) {
 281                 case 1:
 282                         port->iotype = UPIO_MEM;
 283                         break;
 284                 case 2:
 285                         port->iotype = UPIO_MEM16;
 286                         break;
 287                 case 4:
 288                         port->iotype = (big_endian) ? UPIO_MEM32BE : UPIO_MEM32;
 289                         break;
 290                 default:
 291                         pr_warn("[%s] unsupported reg-io-width\n", match->name);
 292                         return -EINVAL;
 293                 }
 294         }
 295
 296         val = of_get_flat_dt_prop(node, "current-speed", NULL);
 297         if (val)
 298                 early_console_dev.baud = be32_to_cpu(*val);
 299
 300         val = of_get_flat_dt_prop(node, "clock-frequency", NULL);
 301         if (val)
 302                 port->uartclk = be32_to_cpu(*val);
 303
 304         if (options) {
 305                 early_console_dev.baud = simple_strtoul(options, NULL, 0);
 306                 strlcpy(early_console_dev.options, options,
 307                         sizeof(early_console_dev.options));
 308         }
 309         earlycon_init(&early_console_dev, match->name);
 310         err = match->setup(&early_console_dev, options);
 311         earlycon_print_info(&early_console_dev);
 312         if (err < 0)
 313                 return err;
 314         if (!early_console_dev.con->write)
 315                 return -ENODEV;
 316
 317
 318         register_console(early_console_dev.con);
 319         return 0;
 320 }
 321
 322 #endif /* CONFIG_OF_EARLY_FLATTREE */