drivers/clk/rockchip/clk_rk3399.c

   1 /*
   2  * (C) Copyright 2015 Google, Inc
   3  * (C) 2017 Theobroma Systems Design und Consulting GmbH
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0
   6  */
   7
   8 #include <common.h>
   9 #include <clk-uclass.h>
  10 #include <dm.h>
  11 #include <dt-structs.h>
  12 #include <errno.h>
  13 #include <mapmem.h>
  14 #include <syscon.h>
  15 #include <asm/io.h>
  16 #include <asm/arch/clock.h>
  17 #include <asm/arch/cru_rk3399.h>
  18 #include <asm/arch/hardware.h>
  19 #include <dm/lists.h>
  20 #include <dt-bindings/clock/rk3399-cru.h>
  21
  22 DECLARE_GLOBAL_DATA_PTR;
  23
  24 #if CONFIG_IS_ENABLED(OF_PLATDATA)
  25 struct rk3399_clk_plat {
  26         struct dtd_rockchip_rk3399_cru dtd;
  27 };
  28
  29 struct rk3399_pmuclk_plat {
  30         struct dtd_rockchip_rk3399_pmucru dtd;
  31 };
  32 #endif
  33
  34 struct pll_div {
  35         u32 refdiv;
  36         u32 fbdiv;
  37         u32 postdiv1;
  38         u32 postdiv2;
  39         u32 frac;
  40 };
  41
  42 #define RATE_TO_DIV(input_rate, output_rate) \
  43         ((input_rate) / (output_rate) - 1);
  44 #define DIV_TO_RATE(input_rate, div)    ((input_rate) / ((div) + 1))
  45
  46 #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
  47         .refdiv = _refdiv,\
  48         .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\
  49         .postdiv1 = _postdiv1, .postdiv2 = _postdiv2};
  50
  51 #if defined(CONFIG_SPL_BUILD)
  52 static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1);
  53 static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2);
  54 #else
  55 static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1);
  56 #endif
  57
  58 static const struct pll_div apll_l_1600_cfg = PLL_DIVISORS(1600*MHz, 3, 1, 1);
  59 static const struct pll_div apll_l_600_cfg = PLL_DIVISORS(600*MHz, 1, 2, 1);
  60
  61 static const struct pll_div *apll_l_cfgs[] = {
  62         [APLL_L_1600_MHZ] = &apll_l_1600_cfg,
  63         [APLL_L_600_MHZ] = &apll_l_600_cfg,
  64 };
  65
  66 enum {
  67         /* PLL_CON0 */
  68         PLL_FBDIV_MASK                  = 0xfff,
  69         PLL_FBDIV_SHIFT                 = 0,
  70
  71         /* PLL_CON1 */
  72         PLL_POSTDIV2_SHIFT              = 12,
  73         PLL_POSTDIV2_MASK               = 0x7 << PLL_POSTDIV2_SHIFT,
  74         PLL_POSTDIV1_SHIFT              = 8,
  75         PLL_POSTDIV1_MASK               = 0x7 << PLL_POSTDIV1_SHIFT,
  76         PLL_REFDIV_MASK                 = 0x3f,
  77         PLL_REFDIV_SHIFT                = 0,
  78
  79         /* PLL_CON2 */
  80         PLL_LOCK_STATUS_SHIFT           = 31,
  81         PLL_LOCK_STATUS_MASK            = 1 << PLL_LOCK_STATUS_SHIFT,
  82         PLL_FRACDIV_MASK                = 0xffffff,
  83         PLL_FRACDIV_SHIFT               = 0,
  84
  85         /* PLL_CON3 */
  86         PLL_MODE_SHIFT                  = 8,
  87         PLL_MODE_MASK                   = 3 << PLL_MODE_SHIFT,
  88         PLL_MODE_SLOW                   = 0,
  89         PLL_MODE_NORM,
  90         PLL_MODE_DEEP,
  91         PLL_DSMPD_SHIFT                 = 3,
  92         PLL_DSMPD_MASK                  = 1 << PLL_DSMPD_SHIFT,
  93         PLL_INTEGER_MODE                = 1,
  94
  95         /* PMUCRU_CLKSEL_CON0 */
  96         PMU_PCLK_DIV_CON_MASK           = 0x1f,
  97         PMU_PCLK_DIV_CON_SHIFT          = 0,
  98
  99         /* PMUCRU_CLKSEL_CON1 */
 100         SPI3_PLL_SEL_SHIFT              = 7,
 101         SPI3_PLL_SEL_MASK               = 1 << SPI3_PLL_SEL_SHIFT,
 102         SPI3_PLL_SEL_24M                = 0,
 103         SPI3_PLL_SEL_PPLL               = 1,
 104         SPI3_DIV_CON_SHIFT              = 0x0,
 105         SPI3_DIV_CON_MASK               = 0x7f,
 106
 107         /* PMUCRU_CLKSEL_CON2 */
 108         I2C_DIV_CON_MASK                = 0x7f,
 109         CLK_I2C8_DIV_CON_SHIFT          = 8,
 110         CLK_I2C0_DIV_CON_SHIFT          = 0,
 111
 112         /* PMUCRU_CLKSEL_CON3 */
 113         CLK_I2C4_DIV_CON_SHIFT          = 0,
 114
 115         /* CLKSEL_CON0 */
 116         ACLKM_CORE_L_DIV_CON_SHIFT      = 8,
 117         ACLKM_CORE_L_DIV_CON_MASK       = 0x1f << ACLKM_CORE_L_DIV_CON_SHIFT,
 118         CLK_CORE_L_PLL_SEL_SHIFT        = 6,
 119         CLK_CORE_L_PLL_SEL_MASK         = 3 << CLK_CORE_L_PLL_SEL_SHIFT,
 120         CLK_CORE_L_PLL_SEL_ALPLL        = 0x0,
 121         CLK_CORE_L_PLL_SEL_ABPLL        = 0x1,
 122         CLK_CORE_L_PLL_SEL_DPLL         = 0x10,
 123         CLK_CORE_L_PLL_SEL_GPLL         = 0x11,
 124         CLK_CORE_L_DIV_MASK             = 0x1f,
 125         CLK_CORE_L_DIV_SHIFT            = 0,
 126
 127         /* CLKSEL_CON1 */
 128         PCLK_DBG_L_DIV_SHIFT            = 0x8,
 129         PCLK_DBG_L_DIV_MASK             = 0x1f << PCLK_DBG_L_DIV_SHIFT,
 130         ATCLK_CORE_L_DIV_SHIFT          = 0,
 131         ATCLK_CORE_L_DIV_MASK           = 0x1f << ATCLK_CORE_L_DIV_SHIFT,
 132
 133         /* CLKSEL_CON14 */
 134         PCLK_PERIHP_DIV_CON_SHIFT       = 12,
 135         PCLK_PERIHP_DIV_CON_MASK        = 0x7 << PCLK_PERIHP_DIV_CON_SHIFT,
 136         HCLK_PERIHP_DIV_CON_SHIFT       = 8,
 137         HCLK_PERIHP_DIV_CON_MASK        = 3 << HCLK_PERIHP_DIV_CON_SHIFT,
 138         ACLK_PERIHP_PLL_SEL_SHIFT       = 7,
 139         ACLK_PERIHP_PLL_SEL_MASK        = 1 << ACLK_PERIHP_PLL_SEL_SHIFT,
 140         ACLK_PERIHP_PLL_SEL_CPLL        = 0,
 141         ACLK_PERIHP_PLL_SEL_GPLL        = 1,
 142         ACLK_PERIHP_DIV_CON_SHIFT       = 0,
 143         ACLK_PERIHP_DIV_CON_MASK        = 0x1f,
 144
 145         /* CLKSEL_CON21 */
 146         ACLK_EMMC_PLL_SEL_SHIFT         = 7,
 147         ACLK_EMMC_PLL_SEL_MASK          = 0x1 << ACLK_EMMC_PLL_SEL_SHIFT,
 148         ACLK_EMMC_PLL_SEL_GPLL          = 0x1,
 149         ACLK_EMMC_DIV_CON_SHIFT         = 0,
 150         ACLK_EMMC_DIV_CON_MASK          = 0x1f,
 151
 152         /* CLKSEL_CON22 */
 153         CLK_EMMC_PLL_SHIFT              = 8,
 154         CLK_EMMC_PLL_MASK               = 0x7 << CLK_EMMC_PLL_SHIFT,
 155         CLK_EMMC_PLL_SEL_GPLL           = 0x1,
 156         CLK_EMMC_PLL_SEL_24M            = 0x5,
 157         CLK_EMMC_DIV_CON_SHIFT          = 0,
 158         CLK_EMMC_DIV_CON_MASK           = 0x7f << CLK_EMMC_DIV_CON_SHIFT,
 159
 160         /* CLKSEL_CON23 */
 161         PCLK_PERILP0_DIV_CON_SHIFT      = 12,
 162         PCLK_PERILP0_DIV_CON_MASK       = 0x7 << PCLK_PERILP0_DIV_CON_SHIFT,
 163         HCLK_PERILP0_DIV_CON_SHIFT      = 8,
 164         HCLK_PERILP0_DIV_CON_MASK       = 3 << HCLK_PERILP0_DIV_CON_SHIFT,
 165         ACLK_PERILP0_PLL_SEL_SHIFT      = 7,
 166         ACLK_PERILP0_PLL_SEL_MASK       = 1 << ACLK_PERILP0_PLL_SEL_SHIFT,
 167         ACLK_PERILP0_PLL_SEL_CPLL       = 0,
 168         ACLK_PERILP0_PLL_SEL_GPLL       = 1,
 169         ACLK_PERILP0_DIV_CON_SHIFT      = 0,
 170         ACLK_PERILP0_DIV_CON_MASK       = 0x1f,
 171
 172         /* CLKSEL_CON25 */
 173         PCLK_PERILP1_DIV_CON_SHIFT      = 8,
 174         PCLK_PERILP1_DIV_CON_MASK       = 0x7 << PCLK_PERILP1_DIV_CON_SHIFT,
 175         HCLK_PERILP1_PLL_SEL_SHIFT      = 7,
 176         HCLK_PERILP1_PLL_SEL_MASK       = 1 << HCLK_PERILP1_PLL_SEL_SHIFT,
 177         HCLK_PERILP1_PLL_SEL_CPLL       = 0,
 178         HCLK_PERILP1_PLL_SEL_GPLL       = 1,
 179         HCLK_PERILP1_DIV_CON_SHIFT      = 0,
 180         HCLK_PERILP1_DIV_CON_MASK       = 0x1f,
 181
 182         /* CLKSEL_CON26 */
 183         CLK_SARADC_DIV_CON_SHIFT        = 8,
 184         CLK_SARADC_DIV_CON_MASK         = 0xff << CLK_SARADC_DIV_CON_SHIFT,
 185
 186         /* CLKSEL_CON27 */
 187         CLK_TSADC_SEL_X24M              = 0x0,
 188         CLK_TSADC_SEL_SHIFT             = 15,
 189         CLK_TSADC_SEL_MASK              = 1 << CLK_TSADC_SEL_SHIFT,
 190         CLK_TSADC_DIV_CON_SHIFT         = 0,
 191         CLK_TSADC_DIV_CON_MASK          = 0x3ff,
 192
 193         /* CLKSEL_CON47 & CLKSEL_CON48 */
 194         ACLK_VOP_PLL_SEL_SHIFT          = 6,
 195         ACLK_VOP_PLL_SEL_MASK           = 0x3 << ACLK_VOP_PLL_SEL_SHIFT,
 196         ACLK_VOP_PLL_SEL_CPLL           = 0x1,
 197         ACLK_VOP_DIV_CON_SHIFT          = 0,
 198         ACLK_VOP_DIV_CON_MASK           = 0x1f << ACLK_VOP_DIV_CON_SHIFT,
 199
 200         /* CLKSEL_CON49 & CLKSEL_CON50 */
 201         DCLK_VOP_DCLK_SEL_SHIFT         = 11,
 202         DCLK_VOP_DCLK_SEL_MASK          = 1 << DCLK_VOP_DCLK_SEL_SHIFT,
 203         DCLK_VOP_DCLK_SEL_DIVOUT        = 0,
 204         DCLK_VOP_PLL_SEL_SHIFT          = 8,
 205         DCLK_VOP_PLL_SEL_MASK           = 3 << DCLK_VOP_PLL_SEL_SHIFT,
 206         DCLK_VOP_PLL_SEL_VPLL           = 0,
 207         DCLK_VOP_DIV_CON_MASK           = 0xff,
 208         DCLK_VOP_DIV_CON_SHIFT          = 0,
 209
 210         /* CLKSEL_CON58 */
 211         CLK_SPI_PLL_SEL_WIDTH = 1,
 212         CLK_SPI_PLL_SEL_MASK = ((1 < CLK_SPI_PLL_SEL_WIDTH) - 1),
 213         CLK_SPI_PLL_SEL_CPLL = 0,
 214         CLK_SPI_PLL_SEL_GPLL = 1,
 215         CLK_SPI_PLL_DIV_CON_WIDTH = 7,
 216         CLK_SPI_PLL_DIV_CON_MASK = ((1 << CLK_SPI_PLL_DIV_CON_WIDTH) - 1),
 217
 218         CLK_SPI5_PLL_DIV_CON_SHIFT      = 8,
 219         CLK_SPI5_PLL_SEL_SHIFT          = 15,
 220
 221         /* CLKSEL_CON59 */
 222         CLK_SPI1_PLL_SEL_SHIFT          = 15,
 223         CLK_SPI1_PLL_DIV_CON_SHIFT      = 8,
 224         CLK_SPI0_PLL_SEL_SHIFT          = 7,
 225         CLK_SPI0_PLL_DIV_CON_SHIFT      = 0,
 226
 227         /* CLKSEL_CON60 */
 228         CLK_SPI4_PLL_SEL_SHIFT          = 15,
 229         CLK_SPI4_PLL_DIV_CON_SHIFT      = 8,
 230         CLK_SPI2_PLL_SEL_SHIFT          = 7,
 231         CLK_SPI2_PLL_DIV_CON_SHIFT      = 0,
 232
 233         /* CLKSEL_CON61 */
 234         CLK_I2C_PLL_SEL_MASK            = 1,
 235         CLK_I2C_PLL_SEL_CPLL            = 0,
 236         CLK_I2C_PLL_SEL_GPLL            = 1,
 237         CLK_I2C5_PLL_SEL_SHIFT          = 15,
 238         CLK_I2C5_DIV_CON_SHIFT          = 8,
 239         CLK_I2C1_PLL_SEL_SHIFT          = 7,
 240         CLK_I2C1_DIV_CON_SHIFT          = 0,
 241
 242         /* CLKSEL_CON62 */
 243         CLK_I2C6_PLL_SEL_SHIFT          = 15,
 244         CLK_I2C6_DIV_CON_SHIFT          = 8,
 245         CLK_I2C2_PLL_SEL_SHIFT          = 7,
 246         CLK_I2C2_DIV_CON_SHIFT          = 0,
 247
 248         /* CLKSEL_CON63 */
 249         CLK_I2C7_PLL_SEL_SHIFT          = 15,
 250         CLK_I2C7_DIV_CON_SHIFT          = 8,
 251         CLK_I2C3_PLL_SEL_SHIFT          = 7,
 252         CLK_I2C3_DIV_CON_SHIFT          = 0,
 253
 254         /* CRU_SOFTRST_CON4 */
 255         RESETN_DDR0_REQ_SHIFT           = 8,
 256         RESETN_DDR0_REQ_MASK            = 1 << RESETN_DDR0_REQ_SHIFT,
 257         RESETN_DDRPHY0_REQ_SHIFT        = 9,
 258         RESETN_DDRPHY0_REQ_MASK         = 1 << RESETN_DDRPHY0_REQ_SHIFT,
 259         RESETN_DDR1_REQ_SHIFT           = 12,
 260         RESETN_DDR1_REQ_MASK            = 1 << RESETN_DDR1_REQ_SHIFT,
 261         RESETN_DDRPHY1_REQ_SHIFT        = 13,
 262         RESETN_DDRPHY1_REQ_MASK         = 1 << RESETN_DDRPHY1_REQ_SHIFT,
 263 };
 264
 265 #define VCO_MAX_KHZ     (3200 * (MHz / KHz))
 266 #define VCO_MIN_KHZ     (800 * (MHz / KHz))
 267 #define OUTPUT_MAX_KHZ  (3200 * (MHz / KHz))
 268 #define OUTPUT_MIN_KHZ  (16 * (MHz / KHz))
 269
 270 /*
 271  *  the div restructions of pll in integer mode, these are defined in
 272  *  * CRU_*PLL_CON0 or PMUCRU_*PLL_CON0
 273  */
 274 #define PLL_DIV_MIN     16
 275 #define PLL_DIV_MAX     3200
 276
 277 /*
 278  * How to calculate the PLL(from TRM V0.3 Part 1 Page 63):
 279  * Formulas also embedded within the Fractional PLL Verilog model:
 280  * If DSMPD = 1 (DSM is disabled, "integer mode")
 281  * FOUTVCO = FREF / REFDIV * FBDIV
 282  * FOUTPOSTDIV = FOUTVCO / POSTDIV1 / POSTDIV2
 283  * Where:
 284  * FOUTVCO = Fractional PLL non-divided output frequency
 285  * FOUTPOSTDIV = Fractional PLL divided output frequency
 286  *               (output of second post divider)
 287  * FREF = Fractional PLL input reference frequency, (the OSC_HZ 24MHz input)
 288  * REFDIV = Fractional PLL input reference clock divider
 289  * FBDIV = Integer value programmed into feedback divide
 290  *
 291  */
 292 static void rkclk_set_pll(u32 *pll_con, const struct pll_div *div)
 293 {
 294         /* All 8 PLLs have same VCO and output frequency range restrictions. */
 295         u32 vco_khz = OSC_HZ / 1000 * div->fbdiv / div->refdiv;
 296         u32 output_khz = vco_khz / div->postdiv1 / div->postdiv2;
 297
 298         debug("PLL at %p: fbdiv=%d, refdiv=%d, postdiv1=%d, "
 299                            "postdiv2=%d, vco=%u khz, output=%u khz\n",
 300                            pll_con, div->fbdiv, div->refdiv, div->postdiv1,
 301                            div->postdiv2, vco_khz, output_khz);
 302         assert(vco_khz >= VCO_MIN_KHZ && vco_khz <= VCO_MAX_KHZ &&
 303                output_khz >= OUTPUT_MIN_KHZ && output_khz <= OUTPUT_MAX_KHZ &&
 304                div->fbdiv >= PLL_DIV_MIN && div->fbdiv <= PLL_DIV_MAX);
 305
 306         /*
 307          * When power on or changing PLL setting,
 308          * we must force PLL into slow mode to ensure output stable clock.
 309          */
 310         rk_clrsetreg(&pll_con[3], PLL_MODE_MASK,
 311                      PLL_MODE_SLOW << PLL_MODE_SHIFT);
 312
 313         /* use integer mode */
 314         rk_clrsetreg(&pll_con[3], PLL_DSMPD_MASK,
 315                      PLL_INTEGER_MODE << PLL_DSMPD_SHIFT);
 316
 317         rk_clrsetreg(&pll_con[0], PLL_FBDIV_MASK,
 318                      div->fbdiv << PLL_FBDIV_SHIFT);
 319         rk_clrsetreg(&pll_con[1],
 320                      PLL_POSTDIV2_MASK | PLL_POSTDIV1_MASK |
 321                      PLL_REFDIV_MASK | PLL_REFDIV_SHIFT,
 322                      (div->postdiv2 << PLL_POSTDIV2_SHIFT) |
 323                      (div->postdiv1 << PLL_POSTDIV1_SHIFT) |
 324                      (div->refdiv << PLL_REFDIV_SHIFT));
 325
 326         /* waiting for pll lock */
 327         while (!(readl(&pll_con[2]) & (1 << PLL_LOCK_STATUS_SHIFT)))
 328                 udelay(1);
 329
 330         /* pll enter normal mode */
 331         rk_clrsetreg(&pll_con[3], PLL_MODE_MASK,
 332                      PLL_MODE_NORM << PLL_MODE_SHIFT);
 333 }
 334
 335 static int pll_para_config(u32 freq_hz, struct pll_div *div)
 336 {
 337         u32 ref_khz = OSC_HZ / KHz, refdiv, fbdiv = 0;
 338         u32 postdiv1, postdiv2 = 1;
 339         u32 fref_khz;
 340         u32 diff_khz, best_diff_khz;
 341         const u32 max_refdiv = 63, max_fbdiv = 3200, min_fbdiv = 16;
 342         const u32 max_postdiv1 = 7, max_postdiv2 = 7;
 343         u32 vco_khz;
 344         u32 freq_khz = freq_hz / KHz;
 345
 346         if (!freq_hz) {
 347                 printf("%s: the frequency can't be 0 Hz\n", __func__);
 348                 return -1;
 349         }
 350
 351         postdiv1 = DIV_ROUND_UP(VCO_MIN_KHZ, freq_khz);
 352         if (postdiv1 > max_postdiv1) {
 353                 postdiv2 = DIV_ROUND_UP(postdiv1, max_postdiv1);
 354                 postdiv1 = DIV_ROUND_UP(postdiv1, postdiv2);
 355         }
 356
 357         vco_khz = freq_khz * postdiv1 * postdiv2;
 358
 359         if (vco_khz < VCO_MIN_KHZ || vco_khz > VCO_MAX_KHZ ||
 360             postdiv2 > max_postdiv2) {
 361                 printf("%s: Cannot find out a supported VCO"
 362                        " for Frequency (%uHz).\n", __func__, freq_hz);
 363                 return -1;
 364         }
 365
 366         div->postdiv1 = postdiv1;
 367         div->postdiv2 = postdiv2;
 368
 369         best_diff_khz = vco_khz;
 370         for (refdiv = 1; refdiv < max_refdiv && best_diff_khz; refdiv++) {
 371                 fref_khz = ref_khz / refdiv;
 372
 373                 fbdiv = vco_khz / fref_khz;
 374                 if ((fbdiv >= max_fbdiv) || (fbdiv <= min_fbdiv))
 375                         continue;
 376                 diff_khz = vco_khz - fbdiv * fref_khz;
 377                 if (fbdiv + 1 < max_fbdiv && diff_khz > fref_khz / 2) {
 378                         fbdiv++;
 379                         diff_khz = fref_khz - diff_khz;
 380                 }
 381
 382                 if (diff_khz >= best_diff_khz)
 383                         continue;
 384
 385                 best_diff_khz = diff_khz;
 386                 div->refdiv = refdiv;
 387                 div->fbdiv = fbdiv;
 388         }
 389
 390         if (best_diff_khz > 4 * (MHz/KHz)) {
 391                 printf("%s: Failed to match output frequency %u, "
 392                        "difference is %u Hz,exceed 4MHZ\n", __func__, freq_hz,
 393                        best_diff_khz * KHz);
 394                 return -1;
 395         }
 396         return 0;
 397 }
 398
 399 #ifdef CONFIG_SPL_BUILD
 400 static void rkclk_init(struct rk3399_cru *cru)
 401 {
 402         u32 aclk_div;
 403         u32 hclk_div;
 404         u32 pclk_div;
 405
 406         /*
 407          * some cru registers changed by bootrom, we'd better reset them to
 408          * reset/default values described in TRM to avoid confusion in kernel.
 409          * Please consider these three lines as a fix of bootrom bug.
 410          */
 411         rk_clrsetreg(&cru->clksel_con[12], 0xffff, 0x4101);
 412         rk_clrsetreg(&cru->clksel_con[19], 0xffff, 0x033f);
 413         rk_clrsetreg(&cru->clksel_con[56], 0x0003, 0x0003);
 414
 415         /* configure gpll cpll */
 416         rkclk_set_pll(&cru->gpll_con[0], &gpll_init_cfg);
 417         rkclk_set_pll(&cru->cpll_con[0], &cpll_init_cfg);
 418
 419         /* configure perihp aclk, hclk, pclk */
 420         aclk_div = GPLL_HZ / PERIHP_ACLK_HZ - 1;
 421         assert((aclk_div + 1) * PERIHP_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
 422
 423         hclk_div = PERIHP_ACLK_HZ / PERIHP_HCLK_HZ - 1;
 424         assert((hclk_div + 1) * PERIHP_HCLK_HZ ==
 425                PERIHP_ACLK_HZ && (hclk_div < 0x4));
 426
 427         pclk_div = PERIHP_ACLK_HZ / PERIHP_PCLK_HZ - 1;
 428         assert((pclk_div + 1) * PERIHP_PCLK_HZ ==
 429                PERIHP_ACLK_HZ && (pclk_div < 0x7));
 430
 431         rk_clrsetreg(&cru->clksel_con[14],
 432                      PCLK_PERIHP_DIV_CON_MASK | HCLK_PERIHP_DIV_CON_MASK |
 433                      ACLK_PERIHP_PLL_SEL_MASK | ACLK_PERIHP_DIV_CON_MASK,
 434                      pclk_div << PCLK_PERIHP_DIV_CON_SHIFT |
 435                      hclk_div << HCLK_PERIHP_DIV_CON_SHIFT |
 436                      ACLK_PERIHP_PLL_SEL_GPLL << ACLK_PERIHP_PLL_SEL_SHIFT |
 437                      aclk_div << ACLK_PERIHP_DIV_CON_SHIFT);
 438
 439         /* configure perilp0 aclk, hclk, pclk */
 440         aclk_div = GPLL_HZ / PERILP0_ACLK_HZ - 1;
 441         assert((aclk_div + 1) * PERILP0_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
 442
 443         hclk_div = PERILP0_ACLK_HZ / PERILP0_HCLK_HZ - 1;
 444         assert((hclk_div + 1) * PERILP0_HCLK_HZ ==
 445                PERILP0_ACLK_HZ && (hclk_div < 0x4));
 446
 447         pclk_div = PERILP0_ACLK_HZ / PERILP0_PCLK_HZ - 1;
 448         assert((pclk_div + 1) * PERILP0_PCLK_HZ ==
 449                PERILP0_ACLK_HZ && (pclk_div < 0x7));
 450
 451         rk_clrsetreg(&cru->clksel_con[23],
 452                      PCLK_PERILP0_DIV_CON_MASK | HCLK_PERILP0_DIV_CON_MASK |
 453                      ACLK_PERILP0_PLL_SEL_MASK | ACLK_PERILP0_DIV_CON_MASK,
 454                      pclk_div << PCLK_PERILP0_DIV_CON_SHIFT |
 455                      hclk_div << HCLK_PERILP0_DIV_CON_SHIFT |
 456                      ACLK_PERILP0_PLL_SEL_GPLL << ACLK_PERILP0_PLL_SEL_SHIFT |
 457                      aclk_div << ACLK_PERILP0_DIV_CON_SHIFT);
 458
 459         /* perilp1 hclk select gpll as source */
 460         hclk_div = GPLL_HZ / PERILP1_HCLK_HZ - 1;
 461         assert((hclk_div + 1) * PERILP1_HCLK_HZ ==
 462                GPLL_HZ && (hclk_div < 0x1f));
 463
 464         pclk_div = PERILP1_HCLK_HZ / PERILP1_HCLK_HZ - 1;
 465         assert((pclk_div + 1) * PERILP1_HCLK_HZ ==
 466                PERILP1_HCLK_HZ && (hclk_div < 0x7));
 467
 468         rk_clrsetreg(&cru->clksel_con[25],
 469                      PCLK_PERILP1_DIV_CON_MASK | HCLK_PERILP1_DIV_CON_MASK |
 470                      HCLK_PERILP1_PLL_SEL_MASK,
 471                      pclk_div << PCLK_PERILP1_DIV_CON_SHIFT |
 472                      hclk_div << HCLK_PERILP1_DIV_CON_SHIFT |
 473                      HCLK_PERILP1_PLL_SEL_GPLL << HCLK_PERILP1_PLL_SEL_SHIFT);
 474 }
 475 #endif
 476
 477 void rk3399_configure_cpu(struct rk3399_cru *cru,
 478                           enum apll_l_frequencies apll_l_freq)
 479 {
 480         u32 aclkm_div;
 481         u32 pclk_dbg_div;
 482         u32 atclk_div;
 483
 484         rkclk_set_pll(&cru->apll_l_con[0], apll_l_cfgs[apll_l_freq]);
 485
 486         aclkm_div = APLL_HZ / ACLKM_CORE_HZ - 1;
 487         assert((aclkm_div + 1) * ACLKM_CORE_HZ == APLL_HZ &&
 488                aclkm_div < 0x1f);
 489
 490         pclk_dbg_div = APLL_HZ / PCLK_DBG_HZ - 1;
 491         assert((pclk_dbg_div + 1) * PCLK_DBG_HZ == APLL_HZ &&
 492                pclk_dbg_div < 0x1f);
 493
 494         atclk_div = APLL_HZ / ATCLK_CORE_HZ - 1;
 495         assert((atclk_div + 1) * ATCLK_CORE_HZ == APLL_HZ &&
 496                atclk_div < 0x1f);
 497
 498         rk_clrsetreg(&cru->clksel_con[0],
 499                      ACLKM_CORE_L_DIV_CON_MASK | CLK_CORE_L_PLL_SEL_MASK |
 500                      CLK_CORE_L_DIV_MASK,
 501                      aclkm_div << ACLKM_CORE_L_DIV_CON_SHIFT |
 502                      CLK_CORE_L_PLL_SEL_ALPLL << CLK_CORE_L_PLL_SEL_SHIFT |
 503                      0 << CLK_CORE_L_DIV_SHIFT);
 504
 505         rk_clrsetreg(&cru->clksel_con[1],
 506                      PCLK_DBG_L_DIV_MASK | ATCLK_CORE_L_DIV_MASK,
 507                      pclk_dbg_div << PCLK_DBG_L_DIV_SHIFT |
 508                      atclk_div << ATCLK_CORE_L_DIV_SHIFT);
 509 }
 510 #define I2C_CLK_REG_MASK(bus) \
 511                         (I2C_DIV_CON_MASK << \
 512                         CLK_I2C ##bus## _DIV_CON_SHIFT | \
 513                         CLK_I2C_PLL_SEL_MASK << \
 514                         CLK_I2C ##bus## _PLL_SEL_SHIFT)
 515
 516 #define I2C_CLK_REG_VALUE(bus, clk_div) \
 517                               ((clk_div - 1) << \
 518                                         CLK_I2C ##bus## _DIV_CON_SHIFT | \
 519                               CLK_I2C_PLL_SEL_GPLL << \
 520                                         CLK_I2C ##bus## _PLL_SEL_SHIFT)
 521
 522 #define I2C_CLK_DIV_VALUE(con, bus) \
 523                         (con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & \
 524                                 I2C_DIV_CON_MASK;
 525
 526 #define I2C_PMUCLK_REG_MASK(bus) \
 527                         (I2C_DIV_CON_MASK << \
 528                          CLK_I2C ##bus## _DIV_CON_SHIFT)
 529
 530 #define I2C_PMUCLK_REG_VALUE(bus, clk_div) \
 531                                 ((clk_div - 1) << \
 532                                 CLK_I2C ##bus## _DIV_CON_SHIFT)
 533
 534 static ulong rk3399_i2c_get_clk(struct rk3399_cru *cru, ulong clk_id)
 535 {
 536         u32 div, con;
 537
 538         switch (clk_id) {
 539         case SCLK_I2C1:
 540                 con = readl(&cru->clksel_con[61]);
 541                 div = I2C_CLK_DIV_VALUE(con, 1);
 542                 break;
 543         case SCLK_I2C2:
 544                 con = readl(&cru->clksel_con[62]);
 545                 div = I2C_CLK_DIV_VALUE(con, 2);
 546                 break;
 547         case SCLK_I2C3:
 548                 con = readl(&cru->clksel_con[63]);
 549                 div = I2C_CLK_DIV_VALUE(con, 3);
 550                 break;
 551         case SCLK_I2C5:
 552                 con = readl(&cru->clksel_con[61]);
 553                 div = I2C_CLK_DIV_VALUE(con, 5);
 554                 break;
 555         case SCLK_I2C6:
 556                 con = readl(&cru->clksel_con[62]);
 557                 div = I2C_CLK_DIV_VALUE(con, 6);
 558                 break;
 559         case SCLK_I2C7:
 560                 con = readl(&cru->clksel_con[63]);
 561                 div = I2C_CLK_DIV_VALUE(con, 7);
 562                 break;
 563         default:
 564                 printf("do not support this i2c bus\n");
 565                 return -EINVAL;
 566         }
 567
 568         return DIV_TO_RATE(GPLL_HZ, div);
 569 }
 570
 571 static ulong rk3399_i2c_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz)
 572 {
 573         int src_clk_div;
 574
 575         /* i2c0,4,8 src clock from ppll, i2c1,2,3,5,6,7 src clock from gpll*/
 576         src_clk_div = GPLL_HZ / hz;
 577         assert(src_clk_div - 1 < 127);
 578
 579         switch (clk_id) {
 580         case SCLK_I2C1:
 581                 rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(1),
 582                              I2C_CLK_REG_VALUE(1, src_clk_div));
 583                 break;
 584         case SCLK_I2C2:
 585                 rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(2),
 586                              I2C_CLK_REG_VALUE(2, src_clk_div));
 587                 break;
 588         case SCLK_I2C3:
 589                 rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(3),
 590                              I2C_CLK_REG_VALUE(3, src_clk_div));
 591                 break;
 592         case SCLK_I2C5:
 593                 rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(5),
 594                              I2C_CLK_REG_VALUE(5, src_clk_div));
 595                 break;
 596         case SCLK_I2C6:
 597                 rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(6),
 598                              I2C_CLK_REG_VALUE(6, src_clk_div));
 599                 break;
 600         case SCLK_I2C7:
 601                 rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(7),
 602                              I2C_CLK_REG_VALUE(7, src_clk_div));
 603                 break;
 604         default:
 605                 printf("do not support this i2c bus\n");
 606                 return -EINVAL;
 607         }
 608
 609         return rk3399_i2c_get_clk(cru, clk_id);
 610 }
 611
 612 /*
 613  * RK3399 SPI clocks have a common divider-width (7 bits) and a single bit
 614  * to select either CPLL or GPLL as the clock-parent. The location within
 615  * the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable.
 616  */
 617
 618 struct spi_clkreg {
 619         uint8_t reg;  /* CLKSEL_CON[reg] register in CRU */
 620         uint8_t div_shift;
 621         uint8_t sel_shift;
 622 };
 623
 624 /*
 625  * The entries are numbered relative to their offset from SCLK_SPI0.
 626  *
 627  * Note that SCLK_SPI3 (which is configured via PMUCRU and requires different
 628  * logic is not supported).
 629  */
 630 static const struct spi_clkreg spi_clkregs[] = {
 631         [0] = { .reg = 59,
 632                 .div_shift = CLK_SPI0_PLL_DIV_CON_SHIFT,
 633                 .sel_shift = CLK_SPI0_PLL_SEL_SHIFT, },
 634         [1] = { .reg = 59,
 635                 .div_shift = CLK_SPI1_PLL_DIV_CON_SHIFT,
 636                 .sel_shift = CLK_SPI1_PLL_SEL_SHIFT, },
 637         [2] = { .reg = 60,
 638                 .div_shift = CLK_SPI2_PLL_DIV_CON_SHIFT,
 639                 .sel_shift = CLK_SPI2_PLL_SEL_SHIFT, },
 640         [3] = { .reg = 60,
 641                 .div_shift = CLK_SPI4_PLL_DIV_CON_SHIFT,
 642                 .sel_shift = CLK_SPI4_PLL_SEL_SHIFT, },
 643         [4] = { .reg = 58,
 644                 .div_shift = CLK_SPI5_PLL_DIV_CON_SHIFT,
 645                 .sel_shift = CLK_SPI5_PLL_SEL_SHIFT, },
 646 };
 647
 648 static inline u32 extract_bits(u32 val, unsigned width, unsigned shift)
 649 {
 650         return (val >> shift) & ((1 << width) - 1);
 651 }
 652
 653 static ulong rk3399_spi_get_clk(struct rk3399_cru *cru, ulong clk_id)
 654 {
 655         const struct spi_clkreg *spiclk = NULL;
 656         u32 div, val;
 657
 658         switch (clk_id) {
 659         case SCLK_SPI0 ... SCLK_SPI5:
 660                 spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
 661                 break;
 662
 663         default:
 664                 error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
 665                 return -EINVAL;
 666         }
 667
 668         val = readl(&cru->clksel_con[spiclk->reg]);
 669         div = extract_bits(val, CLK_SPI_PLL_DIV_CON_WIDTH, spiclk->div_shift);
 670
 671         return DIV_TO_RATE(GPLL_HZ, div);
 672 }
 673
 674 static ulong rk3399_spi_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz)
 675 {
 676         const struct spi_clkreg *spiclk = NULL;
 677         int src_clk_div;
 678
 679         src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1;
 680         assert(src_clk_div < 128);
 681
 682         switch (clk_id) {
 683         case SCLK_SPI1 ... SCLK_SPI5:
 684                 spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
 685                 break;
 686
 687         default:
 688                 error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
 689                 return -EINVAL;
 690         }
 691
 692         rk_clrsetreg(&cru->clksel_con[spiclk->reg],
 693                      ((CLK_SPI_PLL_DIV_CON_MASK << spiclk->div_shift) |
 694                        (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)),
 695                      ((src_clk_div << spiclk->div_shift) |
 696                       (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)));
 697
 698         return rk3399_spi_get_clk(cru, clk_id);
 699 }
 700
 701 static ulong rk3399_vop_set_clk(struct rk3399_cru *cru, ulong clk_id, u32 hz)
 702 {
 703         struct pll_div vpll_config = {0};
 704         int aclk_vop = 198*MHz;
 705         void *aclkreg_addr, *dclkreg_addr;
 706         u32 div;
 707
 708         switch (clk_id) {
 709         case DCLK_VOP0:
 710                 aclkreg_addr = &cru->clksel_con[47];
 711                 dclkreg_addr = &cru->clksel_con[49];
 712                 break;
 713         case DCLK_VOP1:
 714                 aclkreg_addr = &cru->clksel_con[48];
 715                 dclkreg_addr = &cru->clksel_con[50];
 716                 break;
 717         default:
 718                 return -EINVAL;
 719         }
 720         /* vop aclk source clk: cpll */
 721         div = CPLL_HZ / aclk_vop;
 722         assert(div - 1 < 32);
 723
 724         rk_clrsetreg(aclkreg_addr,
 725                      ACLK_VOP_PLL_SEL_MASK | ACLK_VOP_DIV_CON_MASK,
 726                      ACLK_VOP_PLL_SEL_CPLL << ACLK_VOP_PLL_SEL_SHIFT |
 727                      (div - 1) << ACLK_VOP_DIV_CON_SHIFT);
 728
 729         /* vop dclk source from vpll, and equals to vpll(means div == 1) */
 730         if (pll_para_config(hz, &vpll_config))
 731                 return -1;
 732
 733         rkclk_set_pll(&cru->vpll_con[0], &vpll_config);
 734
 735         rk_clrsetreg(dclkreg_addr,
 736                      DCLK_VOP_DCLK_SEL_MASK | DCLK_VOP_PLL_SEL_MASK|
 737                      DCLK_VOP_DIV_CON_MASK,
 738                      DCLK_VOP_DCLK_SEL_DIVOUT << DCLK_VOP_DCLK_SEL_SHIFT |
 739                      DCLK_VOP_PLL_SEL_VPLL << DCLK_VOP_PLL_SEL_SHIFT |
 740                      (1 - 1) << DCLK_VOP_DIV_CON_SHIFT);
 741
 742         return hz;
 743 }
 744
 745 static ulong rk3399_mmc_get_clk(struct rk3399_cru *cru, uint clk_id)
 746 {
 747         u32 div, con;
 748
 749         switch (clk_id) {
 750         case HCLK_SDMMC:
 751         case SCLK_SDMMC:
 752                 con = readl(&cru->clksel_con[16]);
 753                 /* dwmmc controller have internal div 2 */
 754                 div = 2;
 755                 break;
 756         case SCLK_EMMC:
 757                 con = readl(&cru->clksel_con[21]);
 758                 div = 1;
 759                 break;
 760         default:
 761                 return -EINVAL;
 762         }
 763
 764         div *= (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT;
 765         if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT
 766                         == CLK_EMMC_PLL_SEL_24M)
 767                 return DIV_TO_RATE(OSC_HZ, div);
 768         else
 769                 return DIV_TO_RATE(GPLL_HZ, div);
 770 }
 771
 772 static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru,
 773                                 ulong clk_id, ulong set_rate)
 774 {
 775         int src_clk_div;
 776         int aclk_emmc = 198*MHz;
 777
 778         switch (clk_id) {
 779         case HCLK_SDMMC:
 780         case SCLK_SDMMC:
 781                 /* Select clk_sdmmc source from GPLL by default */
 782                 /* mmc clock defaulg div 2 internal, provide double in cru */
 783                 src_clk_div = DIV_ROUND_UP(GPLL_HZ / 2, set_rate);
 784
 785                 if (src_clk_div > 128) {
 786                         /* use 24MHz source for 400KHz clock */
 787                         src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate);
 788                         assert(src_clk_div - 1 < 128);
 789                         rk_clrsetreg(&cru->clksel_con[16],
 790                                      CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
 791                                      CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT |
 792                                      (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
 793                 } else {
 794                         rk_clrsetreg(&cru->clksel_con[16],
 795                                      CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
 796                                      CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT |
 797                                      (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
 798                 }
 799                 break;
 800         case SCLK_EMMC:
 801                 /* Select aclk_emmc source from GPLL */
 802                 src_clk_div = DIV_ROUND_UP(GPLL_HZ , aclk_emmc);
 803                 assert(src_clk_div - 1 < 32);
 804
 805                 rk_clrsetreg(&cru->clksel_con[21],
 806                              ACLK_EMMC_PLL_SEL_MASK | ACLK_EMMC_DIV_CON_MASK,
 807                              ACLK_EMMC_PLL_SEL_GPLL << ACLK_EMMC_PLL_SEL_SHIFT |
 808                              (src_clk_div - 1) << ACLK_EMMC_DIV_CON_SHIFT);
 809
 810                 /* Select clk_emmc source from GPLL too */
 811                 src_clk_div = DIV_ROUND_UP(GPLL_HZ, set_rate);
 812                 assert(src_clk_div - 1 < 128);
 813
 814                 rk_clrsetreg(&cru->clksel_con[22],
 815                              CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
 816                              CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT |
 817                              (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
 818                 break;
 819         default:
 820                 return -EINVAL;
 821         }
 822         return rk3399_mmc_get_clk(cru, clk_id);
 823 }
 824
 825 #define PMUSGRF_DDR_RGN_CON16 0xff330040
 826 static ulong rk3399_ddr_set_clk(struct rk3399_cru *cru,
 827                                 ulong set_rate)
 828 {
 829         struct pll_div dpll_cfg;
 830
 831         /*  IC ECO bug, need to set this register */
 832         writel(0xc000c000, PMUSGRF_DDR_RGN_CON16);
 833
 834         /*  clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */
 835         switch (set_rate) {
 836         case 200*MHz:
 837                 dpll_cfg = (struct pll_div)
 838                 {.refdiv = 1, .fbdiv = 50, .postdiv1 = 6, .postdiv2 = 1};
 839                 break;
 840         case 300*MHz:
 841                 dpll_cfg = (struct pll_div)
 842                 {.refdiv = 2, .fbdiv = 100, .postdiv1 = 4, .postdiv2 = 1};
 843                 break;
 844         case 666*MHz:
 845                 dpll_cfg = (struct pll_div)
 846                 {.refdiv = 2, .fbdiv = 111, .postdiv1 = 2, .postdiv2 = 1};
 847                 break;
 848         case 800*MHz:
 849                 dpll_cfg = (struct pll_div)
 850                 {.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1};
 851                 break;
 852         case 933*MHz:
 853                 dpll_cfg = (struct pll_div)
 854                 {.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1};
 855                 break;
 856         default:
 857                 error("Unsupported SDRAM frequency!,%ld\n", set_rate);
 858         }
 859         rkclk_set_pll(&cru->dpll_con[0], &dpll_cfg);
 860
 861         return set_rate;
 862 }
 863 static ulong rk3399_clk_get_rate(struct clk *clk)
 864 {
 865         struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
 866         ulong rate = 0;
 867
 868         switch (clk->id) {
 869         case 0 ... 63:
 870                 return 0;
 871         case HCLK_SDMMC:
 872         case SCLK_SDMMC:
 873         case SCLK_EMMC:
 874                 rate = rk3399_mmc_get_clk(priv->cru, clk->id);
 875                 break;
 876         case SCLK_I2C1:
 877         case SCLK_I2C2:
 878         case SCLK_I2C3:
 879         case SCLK_I2C5:
 880         case SCLK_I2C6:
 881         case SCLK_I2C7:
 882                 rate = rk3399_i2c_get_clk(priv->cru, clk->id);
 883                 break;
 884         case SCLK_SPI0...SCLK_SPI5:
 885                 rate = rk3399_spi_get_clk(priv->cru, clk->id);
 886                 break;
 887         case SCLK_UART0:
 888         case SCLK_UART2:
 889                 return 24000000;
 890                 break;
 891         case PCLK_HDMI_CTRL:
 892                 break;
 893         case DCLK_VOP0:
 894         case DCLK_VOP1:
 895                 break;
 896         case PCLK_EFUSE1024NS:
 897                 break;
 898         default:
 899                 return -ENOENT;
 900         }
 901
 902         return rate;
 903 }
 904
 905 static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)
 906 {
 907         struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
 908         ulong ret = 0;
 909
 910         switch (clk->id) {
 911         case 0 ... 63:
 912                 return 0;
 913         case HCLK_SDMMC:
 914         case SCLK_SDMMC:
 915         case SCLK_EMMC:
 916                 ret = rk3399_mmc_set_clk(priv->cru, clk->id, rate);
 917                 break;
 918         case SCLK_MAC:
 919                 /* nothing to do, as this is an external clock */
 920                 ret = rate;
 921                 break;
 922         case SCLK_I2C1:
 923         case SCLK_I2C2:
 924         case SCLK_I2C3:
 925         case SCLK_I2C5:
 926         case SCLK_I2C6:
 927         case SCLK_I2C7:
 928                 ret = rk3399_i2c_set_clk(priv->cru, clk->id, rate);
 929                 break;
 930         case SCLK_SPI0...SCLK_SPI5:
 931                 ret = rk3399_spi_set_clk(priv->cru, clk->id, rate);
 932                 break;
 933         case PCLK_HDMI_CTRL:
 934         case PCLK_VIO_GRF:
 935                 /* the PCLK gates for video are enabled by default */
 936                 break;
 937         case DCLK_VOP0:
 938         case DCLK_VOP1:
 939                 ret = rk3399_vop_set_clk(priv->cru, clk->id, rate);
 940                 break;
 941         case SCLK_DDRCLK:
 942                 ret = rk3399_ddr_set_clk(priv->cru, rate);
 943                 break;
 944         case PCLK_EFUSE1024NS:
 945                 break;
 946         default:
 947                 return -ENOENT;
 948         }
 949
 950         return ret;
 951 }
 952
 953 static int rk3399_clk_enable(struct clk *clk)
 954 {
 955         switch (clk->id) {
 956         case HCLK_HOST0:
 957         case HCLK_HOST0_ARB:
 958         case HCLK_HOST1:
 959         case HCLK_HOST1_ARB:
 960                 return 0;
 961         }
 962
 963         debug("%s: unsupported clk %ld\n", __func__, clk->id);
 964         return -ENOENT;
 965 }
 966
 967 static struct clk_ops rk3399_clk_ops = {
 968         .get_rate = rk3399_clk_get_rate,
 969         .set_rate = rk3399_clk_set_rate,
 970         .enable = rk3399_clk_enable,
 971 };
 972
 973 static int rk3399_clk_probe(struct udevice *dev)
 974 {
 975 #ifdef CONFIG_SPL_BUILD
 976         struct rk3399_clk_priv *priv = dev_get_priv(dev);
 977
 978 #if CONFIG_IS_ENABLED(OF_PLATDATA)
 979         struct rk3399_clk_plat *plat = dev_get_platdata(dev);
 980
 981         priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
 982 #endif
 983         rkclk_init(priv->cru);
 984 #endif
 985         return 0;
 986 }
 987
 988 static int rk3399_clk_ofdata_to_platdata(struct udevice *dev)
 989 {
 990 #if !CONFIG_IS_ENABLED(OF_PLATDATA)
 991         struct rk3399_clk_priv *priv = dev_get_priv(dev);
 992
 993         priv->cru = dev_read_addr_ptr(dev);
 994 #endif
 995         return 0;
 996 }
 997
 998 static int rk3399_clk_bind(struct udevice *dev)
 999 {
1000         int ret;
1001
1002         /* The reset driver does not have a device node, so bind it here */
1003         ret = device_bind_driver(gd->dm_root, "rk3399_sysreset", "reset", &dev);
1004         if (ret)
1005                 printf("Warning: No RK3399 reset driver: ret=%d\n", ret);
1006
1007         return 0;
1008 }
1009
1010 static const struct udevice_id rk3399_clk_ids[] = {
1011         { .compatible = "rockchip,rk3399-cru" },
1012         { }
1013 };
1014
1015 U_BOOT_DRIVER(clk_rk3399) = {
1016         .name           = "rockchip_rk3399_cru",
1017         .id             = UCLASS_CLK,
1018         .of_match       = rk3399_clk_ids,
1019         .priv_auto_alloc_size = sizeof(struct rk3399_clk_priv),
1020         .ofdata_to_platdata = rk3399_clk_ofdata_to_platdata,
1021         .ops            = &rk3399_clk_ops,
1022         .bind           = rk3399_clk_bind,
1023         .probe          = rk3399_clk_probe,
1024 #if CONFIG_IS_ENABLED(OF_PLATDATA)
1025         .platdata_auto_alloc_size = sizeof(struct rk3399_clk_plat),
1026 #endif
1027 };
1028
1029 static ulong rk3399_i2c_get_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id)
1030 {
1031         u32 div, con;
1032
1033         switch (clk_id) {
1034         case SCLK_I2C0_PMU:
1035                 con = readl(&pmucru->pmucru_clksel[2]);
1036                 div = I2C_CLK_DIV_VALUE(con, 0);
1037                 break;
1038         case SCLK_I2C4_PMU:
1039                 con = readl(&pmucru->pmucru_clksel[3]);
1040                 div = I2C_CLK_DIV_VALUE(con, 4);
1041                 break;
1042         case SCLK_I2C8_PMU:
1043                 con = readl(&pmucru->pmucru_clksel[2]);
1044                 div = I2C_CLK_DIV_VALUE(con, 8);
1045                 break;
1046         default:
1047                 printf("do not support this i2c bus\n");
1048                 return -EINVAL;
1049         }
1050
1051         return DIV_TO_RATE(PPLL_HZ, div);
1052 }
1053
1054 static ulong rk3399_i2c_set_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id,
1055                                    uint hz)
1056 {
1057         int src_clk_div;
1058
1059         src_clk_div = PPLL_HZ / hz;
1060         assert(src_clk_div - 1 < 127);
1061
1062         switch (clk_id) {
1063         case SCLK_I2C0_PMU:
1064                 rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(0),
1065                              I2C_PMUCLK_REG_VALUE(0, src_clk_div));
1066                 break;
1067         case SCLK_I2C4_PMU:
1068                 rk_clrsetreg(&pmucru->pmucru_clksel[3], I2C_PMUCLK_REG_MASK(4),
1069                              I2C_PMUCLK_REG_VALUE(4, src_clk_div));
1070                 break;
1071         case SCLK_I2C8_PMU:
1072                 rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(8),
1073                              I2C_PMUCLK_REG_VALUE(8, src_clk_div));
1074                 break;
1075         default:
1076                 printf("do not support this i2c bus\n");
1077                 return -EINVAL;
1078         }
1079
1080         return DIV_TO_RATE(PPLL_HZ, src_clk_div);
1081 }
1082
1083 static ulong rk3399_pwm_get_clk(struct rk3399_pmucru *pmucru)
1084 {
1085         u32 div, con;
1086
1087         /* PWM closk rate is same as pclk_pmu */
1088         con = readl(&pmucru->pmucru_clksel[0]);
1089         div = con & PMU_PCLK_DIV_CON_MASK;
1090
1091         return DIV_TO_RATE(PPLL_HZ, div);
1092 }
1093
1094 static ulong rk3399_pmuclk_get_rate(struct clk *clk)
1095 {
1096         struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev);
1097         ulong rate = 0;
1098
1099         switch (clk->id) {
1100         case PCLK_RKPWM_PMU:
1101                 rate = rk3399_pwm_get_clk(priv->pmucru);
1102                 break;
1103         case SCLK_I2C0_PMU:
1104         case SCLK_I2C4_PMU:
1105         case SCLK_I2C8_PMU:
1106                 rate = rk3399_i2c_get_pmuclk(priv->pmucru, clk->id);
1107                 break;
1108         default:
1109                 return -ENOENT;
1110         }
1111
1112         return rate;
1113 }
1114
1115 static ulong rk3399_pmuclk_set_rate(struct clk *clk, ulong rate)
1116 {
1117         struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev);
1118         ulong ret = 0;
1119
1120         switch (clk->id) {
1121         case SCLK_I2C0_PMU:
1122         case SCLK_I2C4_PMU:
1123         case SCLK_I2C8_PMU:
1124                 ret = rk3399_i2c_set_pmuclk(priv->pmucru, clk->id, rate);
1125                 break;
1126         default:
1127                 return -ENOENT;
1128         }
1129
1130         return ret;
1131 }
1132
1133 static struct clk_ops rk3399_pmuclk_ops = {
1134         .get_rate = rk3399_pmuclk_get_rate,
1135         .set_rate = rk3399_pmuclk_set_rate,
1136 };
1137
1138 #ifndef CONFIG_SPL_BUILD
1139 static void pmuclk_init(struct rk3399_pmucru *pmucru)
1140 {
1141         u32 pclk_div;
1142
1143         /*  configure pmu pll(ppll) */
1144         rkclk_set_pll(&pmucru->ppll_con[0], &ppll_init_cfg);
1145
1146         /*  configure pmu pclk */
1147         pclk_div = PPLL_HZ / PMU_PCLK_HZ - 1;
1148         rk_clrsetreg(&pmucru->pmucru_clksel[0],
1149                      PMU_PCLK_DIV_CON_MASK,
1150                      pclk_div << PMU_PCLK_DIV_CON_SHIFT);
1151 }
1152 #endif
1153
1154 static int rk3399_pmuclk_probe(struct udevice *dev)
1155 {
1156 #if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_SPL_BUILD)
1157         struct rk3399_pmuclk_priv *priv = dev_get_priv(dev);
1158 #endif
1159
1160 #if CONFIG_IS_ENABLED(OF_PLATDATA)
1161         struct rk3399_pmuclk_plat *plat = dev_get_platdata(dev);
1162
1163         priv->pmucru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
1164 #endif
1165
1166 #ifndef CONFIG_SPL_BUILD
1167         pmuclk_init(priv->pmucru);
1168 #endif
1169         return 0;
1170 }
1171
1172 static int rk3399_pmuclk_ofdata_to_platdata(struct udevice *dev)
1173 {
1174 #if !CONFIG_IS_ENABLED(OF_PLATDATA)
1175         struct rk3399_pmuclk_priv *priv = dev_get_priv(dev);
1176
1177         priv->pmucru = dev_read_addr_ptr(dev);
1178 #endif
1179         return 0;
1180 }
1181
1182 static const struct udevice_id rk3399_pmuclk_ids[] = {
1183         { .compatible = "rockchip,rk3399-pmucru" },
1184         { }
1185 };
1186
1187 U_BOOT_DRIVER(rockchip_rk3399_pmuclk) = {
1188         .name           = "rockchip_rk3399_pmucru",
1189         .id             = UCLASS_CLK,
1190         .of_match       = rk3399_pmuclk_ids,
1191         .priv_auto_alloc_size = sizeof(struct rk3399_pmuclk_priv),
1192         .ofdata_to_platdata = rk3399_pmuclk_ofdata_to_platdata,
1193         .ops            = &rk3399_pmuclk_ops,
1194         .probe          = rk3399_pmuclk_probe,
1195 #if CONFIG_IS_ENABLED(OF_PLATDATA)
1196         .platdata_auto_alloc_size = sizeof(struct rk3399_pmuclk_plat),
1197 #endif
1198 };