include/configs/lsxl.h

   1 /*
   2  * Copyright (c) 2012 Michael Walle
   3  * Michael Walle <[email protected]>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _CONFIG_LSXL_H
   9 #define _CONFIG_LSXL_H
  10
  11 /*
  12  * Version number information
  13  */
  14 #if defined(CONFIG_LSCHLV2)
  15 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
  16 #define CONFIG_MACH_TYPE 3006
  17 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
  18 #elif defined(CONFIG_LSXHL)
  19 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
  20 #define CONFIG_MACH_TYPE 2663
  21 /* CONFIG_SYS_TCLK is 200000000 by default */
  22 #else
  23 #error "unknown board"
  24 #endif
  25
  26 /*
  27  * General configuration options
  28  */
  29 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  30 #define CONFIG_KW88F6281                /* SOC Name */
  31
  32 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  33 #define CONFIG_MISC_INIT_R
  34 #define CONFIG_SHOW_BOOT_PROGRESS
  35
  36 #define CONFIG_KIRKWOOD_GPIO
  37
  38 /*
  39  * Commands configuration
  40  */
  41 #define CONFIG_CMD_ENV
  42 #define CONFIG_CMD_IDE
  43
  44 /*
  45  * mv-common.h should be defined after CMD configs since it used them
  46  * to enable certain macros
  47  */
  48 #include "mv-common.h"
  49
  50 /* loading initramfs images without uimage header */
  51 #define CONFIG_SUPPORT_RAW_INITRD
  52
  53 /* ST M25P40 */
  54 #undef CONFIG_ENV_SPI_MAX_HZ
  55 #define CONFIG_ENV_SPI_MAX_HZ           25000000
  56 #undef CONFIG_SF_DEFAULT_SPEED
  57 #define CONFIG_SF_DEFAULT_SPEED         25000000
  58
  59 /*
  60  *  Environment variables configurations
  61  */
  62 #ifdef CONFIG_SPI_FLASH
  63 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  64 #define CONFIG_SYS_MAX_FLASH_SECT       8
  65 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
  66 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64K */
  67 #else
  68 #define CONFIG_ENV_IS_NOWHERE
  69 #endif
  70
  71 #define CONFIG_ENV_SIZE                 0x10000 /* 64k */
  72 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
  73
  74 /*
  75  * Default environment variables
  76  */
  77 #define CONFIG_LOADADDR         0x00800000
  78 #define CONFIG_BOOTCOMMAND      "run bootcmd_${bootsource}"
  79 #define CONFIG_BOOTARGS         "console=ttyS0,115200 root=/dev/sda2"
  80
  81 #if defined(CONFIG_LSXHL)
  82 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
  83 #elif defined(CONFIG_LSCHLV2)
  84 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
  85 #else
  86 #error "Unsupported board"
  87 #endif
  88
  89 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  90         "bootsource=legacy\0"                                           \
  91         "hdpart=0:1\0"                                                  \
  92         "kernel_addr=0x00800000\0"                                      \
  93         "ramdisk_addr=0x01000000\0"                                     \
  94         "fdt_addr=0x00ff0000\0"                                         \
  95         "bootcmd_legacy=ide reset "                                     \
  96                 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
  97                 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
  98                 "&& bootm ${kernel_addr} ${ramdisk_addr}\0"             \
  99         "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
 100                 "&& tftpboot ${ramdisk_addr} initrd.img "               \
 101                 "&& setenv ramdisk_len ${filesize} "                    \
 102                 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
 103                 "&& bootz ${kernel_addr} "                              \
 104                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 105         "bootcmd_hdd=ide reset "                                        \
 106                 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz "        \
 107                 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "    \
 108                 "&& setenv ramdisk_len ${filesize} "                    \
 109                 "&& load ide ${hdpart} ${fdt_addr} /dtb "               \
 110                 "&& bootz ${kernel_addr} "                              \
 111                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 112         "bootcmd_usb=usb start "                                        \
 113                 "&& load usb 0:1 ${kernel_addr} /vmlinuz "              \
 114                 "&& load usb 0:1 ${ramdisk_addr} /initrd.img "          \
 115                 "&& setenv ramdisk_len ${filesize} "                    \
 116                 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "       \
 117                 "&& bootz ${kernel_addr} "                              \
 118                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
 119         "bootcmd_rescue=run config_nc_dhcp; run nc\0"                   \
 120         "eraseenv=sf probe 0 "                                          \
 121                 "&& sf erase " __stringify(CONFIG_ENV_OFFSET)           \
 122                         " +" __stringify(CONFIG_ENV_SIZE) "\0"          \
 123         "config_nc_dhcp=setenv autoload_old ${autoload}; "              \
 124                 "setenv autoload no "                                   \
 125                 "&& bootp "                                             \
 126                 "&& setenv ncip "                                       \
 127                 "&& setenv autoload ${autoload_old}; "                  \
 128                 "setenv autoload_old\0"                                 \
 129         "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
 130                 "setenv ncip; setenv gatewayip; setenv ethact; "        \
 131                 "setenv bootfile; setenv dnsip; "                       \
 132                 "setenv bootsource legacy; run ser\0"                   \
 133         "restore_env=run standard_env; saveenv; reset\0"                \
 134         "ser=setenv stdin serial; setenv stdout serial; "               \
 135                 "setenv stderr serial\0"                                \
 136         "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"      \
 137         "stdin=serial\0"                                                \
 138         "stdout=serial\0"                                               \
 139         "stderr=serial\0"
 140
 141 /*
 142  * Ethernet Driver configuration
 143  */
 144 #ifdef CONFIG_CMD_NET
 145 #define CONFIG_MVGBE_PORTS              {0, 1} /* enable port 1 only */
 146 #define CONFIG_PHY_BASE_ADR             7
 147 #undef CONFIG_RESET_PHY_R
 148 #endif /* CONFIG_CMD_NET */
 149
 150 #ifdef CONFIG_CMD_IDE
 151 #undef CONFIG_IDE_LED
 152 #undef CONFIG_SYS_IDE_MAXBUS
 153 #define CONFIG_SYS_IDE_MAXBUS           1
 154 #undef CONFIG_SYS_IDE_MAXDEVICE
 155 #define CONFIG_SYS_IDE_MAXDEVICE        1
 156 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 157 #define CONFIG_SYS_64BIT_LBA
 158 #endif
 159
 160 #endif /* _CONFIG_LSXL_H */