include/configs/dart_6ul.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Board configuration file for Variscite DART-6UL Evaluation Kit
   4  * Copyright (C) 2019 Parthiban Nallathambi <[email protected]>
   5  */
   6 #ifndef __DART_6UL_H
   7 #define __DART_6UL_H
   8
   9 #include <linux/sizes.h>
  10 #include "mx6_common.h"
  11
  12 /* SPL options */
  13 #include "imx6_spl.h"
  14
  15 /* NAND pin conflicts with usdhc2 */
  16 #ifdef CONFIG_CMD_NAND
  17 #define CONFIG_SYS_FSL_USDHC_NUM        1
  18 #else
  19 #define CONFIG_SYS_FSL_USDHC_NUM        2
  20 #endif
  21
  22 #ifdef CONFIG_CMD_NET
  23 #define CONFIG_FEC_ENET_DEV             0
  24
  25 #if (CONFIG_FEC_ENET_DEV == 0)
  26 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  27 #define CONFIG_FEC_MXC_PHYADDR          0x1
  28 #define CONFIG_FEC_XCV_TYPE             RMII
  29 #define CONFIG_ETHPRIME                 "eth0"
  30 #elif (CONFIG_FEC_ENET_DEV == 1)
  31 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
  32 #define CONFIG_FEC_MXC_PHYADDR          0x3
  33 #define CONFIG_FEC_XCV_TYPE             RMII
  34 #define CONFIG_ETHPRIME                 "eth1"
  35 #endif
  36 #endif
  37
  38 /* Size of malloc() pool */
  39 #define CONFIG_SYS_MALLOC_LEN           (16 * SZ_1M)
  40
  41 /* Environment settings */
  42 #define CONFIG_ENV_SIZE                 SZ_8K
  43 #define CONFIG_ENV_OFFSET               (14 * SZ_64K)
  44 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  45 #define CONFIG_ENV_OFFSET_REDUND        \
  46         (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  47
  48 /* Environment in SD */
  49 #define CONFIG_SYS_MMC_ENV_DEV          0
  50 #define CONFIG_SYS_MMC_ENV_PART         0
  51 #define MMC_ROOTFS_DEV                  0
  52 #define MMC_ROOTFS_PART                 2
  53
  54 /* Console configs */
  55 #define CONFIG_MXC_UART_BASE            UART1_BASE
  56
  57 /* MMC Configs */
  58
  59 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  60 #define CONFIG_SUPPORT_EMMC_BOOT
  61
  62 /* I2C configs */
  63 #ifdef CONFIG_CMD_I2C
  64 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  65 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  66 #define CONFIG_SYS_I2C_SPEED            100000
  67 #endif
  68
  69 /* Miscellaneous configurable options */
  70 #define CONFIG_SYS_MEMTEST_START        0x80000000
  71 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x8000000)
  72
  73 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  74 #define CONFIG_SYS_HZ                   1000
  75
  76 /* Physical Memory Map */
  77 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  78 #define PHYS_SDRAM_SIZE                 SZ_512M
  79
  80 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  81 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  82 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  83
  84 #define CONFIG_SYS_INIT_SP_OFFSET \
  85         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  86 #define CONFIG_SYS_INIT_SP_ADDR \
  87         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  88
  89 /* USB Configs */
  90 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  91 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  92 #define CONFIG_MXC_USB_FLAGS            0
  93 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  94
  95 #define CONFIG_IMX_THERMAL
  96
  97 #define ENV_MMC \
  98         "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
  99         "mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \
 100         "fitpart=1\0" \
 101         "bootdelay=3\0" \
 102         "silent=1\0" \
 103         "optargs=rw rootwait\0" \
 104         "mmcautodetect=yes\0" \
 105         "mmcrootfstype=ext4\0" \
 106         "mmcfit_name=fitImage\0" \
 107         "mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \
 108                     "${mmcfit_name}\0" \
 109         "mmcargs=setenv bootargs " \
 110                 "root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \
 111                 "console=${console} rootfstype=${mmcrootfstype}\0" \
 112         "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \
 113
 114 /* Default environment */
 115 #define CONFIG_EXTRA_ENV_SETTINGS \
 116         "fdt_high=0xffffffff\0" \
 117         "console=ttymxc0,115200n8\0" \
 118         "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
 119         "fit_addr=0x82000000\0" \
 120         ENV_MMC
 121
 122 #define CONFIG_BOOTCOMMAND              "run mmc_mmc_fit"
 123
 124 #define BOOT_TARGET_DEVICES(func) \
 125         func(MMC, mmc, 0) \
 126         func(MMC, mmc, 1) \
 127         func(DHCP, dhcp, na)
 128
 129 #include <config_distro_bootcmd.h>
 130 #endif /* __DART_6UL_H */