board/embest/mx6boards/mx6boards.c

   1 /*
   2  * Copyright (C) 2014 Eukréa Electromatique
   3  * Author: Eric Bénard <[email protected]>
   4  *         Fabio Estevam <[email protected]>
   5  *         Jon Nettleton <[email protected]>
   6  *
   7  * based on sabresd.c which is :
   8  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   9  * and on hummingboard.c which is :
  10  * Copyright (C) 2013 SolidRun ltd.
  11  * Copyright (C) 2013 Jon Nettleton <[email protected]>.
  12  *
  13  * SPDX-License-Identifier:     GPL-2.0+
  14  */
  15
  16 #include <asm/arch/clock.h>
  17 #include <asm/arch/sys_proto.h>
  18 #include <asm/arch/imx-regs.h>
  19 #include <asm/arch/iomux.h>
  20 #include <asm/arch/mx6-pins.h>
  21 #include <asm/errno.h>
  22 #include <asm/gpio.h>
  23 #include <asm/imx-common/iomux-v3.h>
  24 #include <asm/imx-common/boot_mode.h>
  25 #include <asm/imx-common/mxc_i2c.h>
  26 #include <asm/imx-common/video.h>
  27 #include <i2c.h>
  28 #include <mmc.h>
  29 #include <fsl_esdhc.h>
  30 #include <miiphy.h>
  31 #include <netdev.h>
  32 #include <asm/arch/mxc_hdmi.h>
  33 #include <asm/arch/crm_regs.h>
  34 #include <linux/fb.h>
  35 #include <ipu_pixfmt.h>
  36 #include <asm/io.h>
  37 #include <asm/arch/sys_proto.h>
  38 DECLARE_GLOBAL_DATA_PTR;
  39
  40 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                   \
  41         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |                 \
  42         PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  43
  44 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |                    \
  45         PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |                 \
  46         PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  47
  48 #define USDHC_PAD_CLK_CTRL (PAD_CTL_SPEED_LOW |         \
  49         PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST |                  \
  50         PAD_CTL_HYS)
  51
  52 #define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                   \
  53         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
  54
  55 #define ENET_PAD_CTRL_PD  (PAD_CTL_PUS_100K_DOWN |              \
  56         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
  57
  58 #define ENET_PAD_CTRL_CLK  ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \
  59         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
  60
  61 #define I2C_PAD_CTRL    (PAD_CTL_PUS_100K_UP |                  \
  62         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
  63         PAD_CTL_ODE | PAD_CTL_SRE_FAST)
  64
  65 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
  66                       PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
  67
  68 static int board_type = -1;
  69 #define BOARD_IS_MARSBOARD      0
  70 #define BOARD_IS_RIOTBOARD      1
  71
  72 int dram_init(void)
  73 {
  74         gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
  75
  76         return 0;
  77 }
  78
  79 static iomux_v3_cfg_t const uart2_pads[] = {
  80         MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  81         MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
  82 };
  83
  84 static void setup_iomux_uart(void)
  85 {
  86         imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
  87 }
  88
  89 iomux_v3_cfg_t const enet_pads[] = {
  90         MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
  91         MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
  92         /* GPIO16 -> AR8035 25MHz */
  93         MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL),
  94         MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(NO_PAD_CTRL),
  95         MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
  96         MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
  97         MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
  98         MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
  99         MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
 100         /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
 101         MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK),
 102         MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
 103         MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
 104         MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
 105         MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
 106         MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
 107         MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
 108         /* AR8035 PHY Reset */
 109         MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
 110         /* AR8035 PHY Interrupt */
 111         MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(ENET_PAD_CTRL),
 112 };
 113
 114 static void setup_iomux_enet(void)
 115 {
 116         imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
 117
 118         /* Reset AR8035 PHY */
 119         gpio_direction_output(IMX_GPIO_NR(3, 31) , 0);
 120         mdelay(2);
 121         gpio_set_value(IMX_GPIO_NR(3, 31), 1);
 122 }
 123
 124 int mx6_rgmii_rework(struct phy_device *phydev)
 125 {
 126         /* from linux/arch/arm/mach-imx/mach-imx6q.c :
 127          * Ar803x phy SmartEEE feature cause link status generates glitch,
 128          * which cause ethernet link down/up issue, so disable SmartEEE
 129          */
 130         phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
 131         phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d);
 132         phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003);
 133
 134         return 0;
 135 }
 136
 137 int board_phy_config(struct phy_device *phydev)
 138 {
 139         mx6_rgmii_rework(phydev);
 140
 141         if (phydev->drv->config)
 142                 phydev->drv->config(phydev);
 143
 144         return 0;
 145 }
 146
 147 iomux_v3_cfg_t const usdhc2_pads[] = {
 148         MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
 149         MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 150         MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 151         MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 152         MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 153         MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 154         MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
 155         MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 156 };
 157
 158 iomux_v3_cfg_t const usdhc3_pads[] = {
 159         MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
 160         MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 161         MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 162         MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 163         MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 164         MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 165 };
 166
 167 iomux_v3_cfg_t const riotboard_usdhc3_pads[] = {
 168         MX6_PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
 169         MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 170 };
 171
 172 iomux_v3_cfg_t const usdhc4_pads[] = {
 173         MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
 174         MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 175         MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 176         MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 177         MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 178         MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 179         /* eMMC RST */
 180         MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
 181 };
 182
 183 #ifdef CONFIG_FSL_ESDHC
 184 struct fsl_esdhc_cfg usdhc_cfg[3] = {
 185         {USDHC2_BASE_ADDR},
 186         {USDHC3_BASE_ADDR},
 187         {USDHC4_BASE_ADDR},
 188 };
 189
 190 #define USDHC2_CD_GPIO  IMX_GPIO_NR(1, 4)
 191 #define USDHC3_CD_GPIO  IMX_GPIO_NR(7, 0)
 192
 193 int board_mmc_getcd(struct mmc *mmc)
 194 {
 195         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 196         int ret = 0;
 197
 198         switch (cfg->esdhc_base) {
 199         case USDHC2_BASE_ADDR:
 200                 ret = !gpio_get_value(USDHC2_CD_GPIO);
 201                 break;
 202         case USDHC3_BASE_ADDR:
 203                 if (board_type == BOARD_IS_RIOTBOARD)
 204                         ret = !gpio_get_value(USDHC3_CD_GPIO);
 205                 else if (board_type == BOARD_IS_MARSBOARD)
 206                         ret = 1; /* eMMC/uSDHC3 is always present */
 207                 break;
 208         case USDHC4_BASE_ADDR:
 209                 ret = 1; /* eMMC/uSDHC4 is always present */
 210                 break;
 211         }
 212
 213         return ret;
 214 }
 215
 216 int board_mmc_init(bd_t *bis)
 217 {
 218         s32 status = 0;
 219         int i;
 220
 221         /*
 222          * According to the board_mmc_init() the following map is done:
 223          * (U-boot device node)    (Physical Port)
 224          * ** RiOTboard :
 225          * mmc0                    SDCard slot (bottom)
 226          * mmc1                    uSDCard slot (top)
 227          * mmc2                    eMMC
 228          * ** MarSBoard :
 229          * mmc0                    uSDCard slot (bottom)
 230          * mmc1                    eMMC
 231          */
 232         for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
 233                 switch (i) {
 234                 case 0:
 235                         imx_iomux_v3_setup_multiple_pads(
 236                                 usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
 237                         gpio_direction_input(USDHC2_CD_GPIO);
 238                         usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 239                         usdhc_cfg[0].max_bus_width = 4;
 240                         break;
 241                 case 1:
 242                         imx_iomux_v3_setup_multiple_pads(
 243                                 usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
 244                         if (board_type == BOARD_IS_RIOTBOARD) {
 245                                 imx_iomux_v3_setup_multiple_pads(
 246                                         riotboard_usdhc3_pads,
 247                                         ARRAY_SIZE(riotboard_usdhc3_pads));
 248                                 gpio_direction_input(USDHC3_CD_GPIO);
 249                                 gpio_direction_output(IMX_GPIO_NR(7, 8) , 0);
 250                                 udelay(250);
 251                                 gpio_set_value(IMX_GPIO_NR(7, 8), 1);
 252                         }
 253                         usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 254                         usdhc_cfg[1].max_bus_width = 4;
 255                         break;
 256                 case 2:
 257                         imx_iomux_v3_setup_multiple_pads(
 258                                 usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
 259                         usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 260                         usdhc_cfg[2].max_bus_width = 4;
 261                         gpio_direction_output(IMX_GPIO_NR(6, 8) , 0);
 262                         udelay(250);
 263                         gpio_set_value(IMX_GPIO_NR(6, 8), 1);
 264                         break;
 265                 default:
 266                         printf("Warning: you configured more USDHC controllers"
 267                                "(%d) then supported by the board (%d)\n",
 268                                i + 1, CONFIG_SYS_FSL_USDHC_NUM);
 269                         return status;
 270                 }
 271
 272                 status |= fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
 273         }
 274
 275         return status;
 276 }
 277 #endif
 278
 279 #ifdef CONFIG_MXC_SPI
 280 iomux_v3_cfg_t const ecspi1_pads[] = {
 281         MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
 282         MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
 283         MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
 284         MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
 285 };
 286
 287 static void setup_spi(void)
 288 {
 289         imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
 290 }
 291 #endif
 292
 293 struct i2c_pads_info i2c_pad_info1 = {
 294         .scl = {
 295                 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL
 296                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 297                 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27
 298                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 299                 .gp = IMX_GPIO_NR(5, 27)
 300         },
 301         .sda = {
 302                 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA
 303                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 304                 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26
 305                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 306                 .gp = IMX_GPIO_NR(5, 26)
 307         }
 308 };
 309
 310 struct i2c_pads_info i2c_pad_info2 = {
 311         .scl = {
 312                 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL
 313                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 314                 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12
 315                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 316                 .gp = IMX_GPIO_NR(4, 12)
 317         },
 318         .sda = {
 319                 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA
 320                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 321                 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13
 322                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 323                 .gp = IMX_GPIO_NR(4, 13)
 324         }
 325 };
 326
 327 struct i2c_pads_info i2c_pad_info3 = {
 328         .scl = {
 329                 .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL
 330                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 331                 .gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05
 332                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 333                 .gp = IMX_GPIO_NR(1, 5)
 334         },
 335         .sda = {
 336                 .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA
 337                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 338                 .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06
 339                                 | MUX_PAD_CTRL(I2C_PAD_CTRL),
 340                 .gp = IMX_GPIO_NR(1, 6)
 341         }
 342 };
 343
 344 iomux_v3_cfg_t const tft_pads_riot[] = {
 345         /* LCD_PWR_EN */
 346         MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
 347         /* TOUCH_INT */
 348         MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
 349         /* LED_PWR_EN */
 350         MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
 351         /* BL LEVEL */
 352         MX6_PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
 353 };
 354
 355 iomux_v3_cfg_t const tft_pads_mars[] = {
 356         /* LCD_PWR_EN */
 357         MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
 358         /* TOUCH_INT */
 359         MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
 360         /* LED_PWR_EN */
 361         MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
 362         /* BL LEVEL (PWM4) */
 363         MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
 364 };
 365
 366 #if defined(CONFIG_VIDEO_IPUV3)
 367
 368 static void enable_lvds(struct display_info_t const *dev)
 369 {
 370         struct iomuxc *iomux = (struct iomuxc *)
 371                                 IOMUXC_BASE_ADDR;
 372         setbits_le32(&iomux->gpr[2],
 373                      IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT);
 374         /* set backlight level to ON */
 375         if (board_type == BOARD_IS_RIOTBOARD)
 376                 gpio_direction_output(IMX_GPIO_NR(1, 18) , 1);
 377         else if (board_type == BOARD_IS_MARSBOARD)
 378                 gpio_direction_output(IMX_GPIO_NR(2, 10) , 1);
 379 }
 380
 381 static void disable_lvds(struct display_info_t const *dev)
 382 {
 383         struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 384
 385         /* set backlight level to OFF */
 386         if (board_type == BOARD_IS_RIOTBOARD)
 387                 gpio_direction_output(IMX_GPIO_NR(1, 18) , 0);
 388         else if (board_type == BOARD_IS_MARSBOARD)
 389                 gpio_direction_output(IMX_GPIO_NR(2, 10) , 0);
 390
 391         clrbits_le32(&iomux->gpr[2],
 392                      IOMUXC_GPR2_LVDS_CH0_MODE_MASK);
 393 }
 394
 395 static void do_enable_hdmi(struct display_info_t const *dev)
 396 {
 397         disable_lvds(dev);
 398         imx_enable_hdmi_phy();
 399 }
 400
 401 static int detect_i2c(struct display_info_t const *dev)
 402 {
 403         return (0 == i2c_set_bus_num(dev->bus)) &&
 404                 (0 == i2c_probe(dev->addr));
 405 }
 406
 407 struct display_info_t const displays[] = {{
 408         .bus    = -1,
 409         .addr   = 0,
 410         .pixfmt = IPU_PIX_FMT_RGB24,
 411         .detect = detect_hdmi,
 412         .enable = do_enable_hdmi,
 413         .mode   = {
 414                 .name           = "HDMI",
 415                 .refresh        = 60,
 416                 .xres           = 1024,
 417                 .yres           = 768,
 418                 .pixclock       = 15385,
 419                 .left_margin    = 220,
 420                 .right_margin   = 40,
 421                 .upper_margin   = 21,
 422                 .lower_margin   = 7,
 423                 .hsync_len      = 60,
 424                 .vsync_len      = 10,
 425                 .sync           = FB_SYNC_EXT,
 426                 .vmode          = FB_VMODE_NONINTERLACED
 427 } }, {
 428         .bus    = 2,
 429         .addr   = 0x1,
 430         .pixfmt = IPU_PIX_FMT_LVDS666,
 431         .detect = detect_i2c,
 432         .enable = enable_lvds,
 433         .mode   = {
 434                 .name           = "LCD8000-97C",
 435                 .refresh        = 60,
 436                 .xres           = 1024,
 437                 .yres           = 768,
 438                 .pixclock       = 15385,
 439                 .left_margin    = 100,
 440                 .right_margin   = 200,
 441                 .upper_margin   = 10,
 442                 .lower_margin   = 20,
 443                 .hsync_len      = 20,
 444                 .vsync_len      = 8,
 445                 .sync           = FB_SYNC_EXT,
 446                 .vmode          = FB_VMODE_NONINTERLACED
 447 } } };
 448 size_t display_count = ARRAY_SIZE(displays);
 449
 450 static void setup_display(void)
 451 {
 452         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 453         struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 454         int reg;
 455
 456         enable_ipu_clock();
 457         imx_setup_hdmi();
 458
 459         /* Turn on LDB0, IPU,IPU DI0 clocks */
 460         setbits_le32(&mxc_ccm->CCGR3,
 461                      MXC_CCM_CCGR3_LDB_DI0_MASK);
 462
 463         /* set LDB0 clk select to 011/011 */
 464         clrsetbits_le32(&mxc_ccm->cs2cdr,
 465                         MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK,
 466                         (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
 467
 468         setbits_le32(&mxc_ccm->cscmr2,
 469                      MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
 470
 471         setbits_le32(&mxc_ccm->chsccdr,
 472                      (CHSCCDR_CLK_SEL_LDB_DI0
 473                      << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));
 474
 475         reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
 476              | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
 477              | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
 478              | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
 479              | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
 480              | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
 481              | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
 482              | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
 483         writel(reg, &iomux->gpr[2]);
 484
 485         clrsetbits_le32(&iomux->gpr[3],
 486                         IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
 487                         IOMUXC_GPR3_HDMI_MUX_CTL_MASK,
 488                         IOMUXC_GPR3_MUX_SRC_IPU1_DI0
 489                         << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
 490 }
 491 #endif /* CONFIG_VIDEO_IPUV3 */
 492
 493 /*
 494  * Do not overwrite the console
 495  * Use always serial for U-Boot console
 496  */
 497 int overwrite_console(void)
 498 {
 499         return 1;
 500 }
 501
 502 int board_eth_init(bd_t *bis)
 503 {
 504         setup_iomux_enet();
 505
 506         return cpu_eth_init(bis);
 507 }
 508
 509 int board_early_init_f(void)
 510 {
 511         u32 cputype = cpu_type(get_cpu_rev());
 512
 513         switch (cputype) {
 514         case MXC_CPU_MX6SOLO:
 515                 board_type = BOARD_IS_RIOTBOARD;
 516                 break;
 517         case MXC_CPU_MX6D:
 518                 board_type = BOARD_IS_MARSBOARD;
 519                 break;
 520         }
 521
 522         setup_iomux_uart();
 523
 524         if (board_type == BOARD_IS_RIOTBOARD)
 525                 imx_iomux_v3_setup_multiple_pads(
 526                         tft_pads_riot, ARRAY_SIZE(tft_pads_riot));
 527         else if (board_type == BOARD_IS_MARSBOARD)
 528                 imx_iomux_v3_setup_multiple_pads(
 529                         tft_pads_mars, ARRAY_SIZE(tft_pads_mars));
 530 #if defined(CONFIG_VIDEO_IPUV3)
 531         /* power ON LCD */
 532         gpio_direction_output(IMX_GPIO_NR(1, 29) , 1);
 533         /* touch interrupt is an input */
 534         gpio_direction_input(IMX_GPIO_NR(6, 14));
 535         /* power ON backlight */
 536         gpio_direction_output(IMX_GPIO_NR(6, 15) , 1);
 537         /* set backlight level to off */
 538         if (board_type == BOARD_IS_RIOTBOARD)
 539                 gpio_direction_output(IMX_GPIO_NR(1, 18) , 0);
 540         else if (board_type == BOARD_IS_MARSBOARD)
 541                 gpio_direction_output(IMX_GPIO_NR(2, 10) , 0);
 542         setup_display();
 543 #endif
 544
 545         return 0;
 546 }
 547
 548 int board_init(void)
 549 {
 550         /* address of boot parameters */
 551         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 552         /* i2c1 : PMIC, Audio codec on RiOT, Expansion connector on MarS */
 553         setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
 554         /* i2c2 : HDMI EDID */
 555         setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
 556         /* i2c3 : LVDS, Expansion connector */
 557         setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
 558 #ifdef CONFIG_MXC_SPI
 559         setup_spi();
 560 #endif
 561         return 0;
 562 }
 563
 564 #ifdef CONFIG_CMD_BMODE
 565 static const struct boot_mode riotboard_boot_modes[] = {
 566         {"sd2",  MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
 567         {"sd3",  MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
 568         {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
 569         {NULL,   0},
 570 };
 571 static const struct boot_mode marsboard_boot_modes[] = {
 572         {"sd2",  MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
 573         {"emmc", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
 574         {NULL,   0},
 575 };
 576 #endif
 577
 578 int board_late_init(void)
 579 {
 580 #ifdef CONFIG_CMD_BMODE
 581         if (board_type == BOARD_IS_RIOTBOARD)
 582                 add_board_boot_modes(riotboard_boot_modes);
 583         else if (board_type == BOARD_IS_RIOTBOARD)
 584                 add_board_boot_modes(marsboard_boot_modes);
 585 #endif
 586
 587         return 0;
 588 }
 589
 590 int checkboard(void)
 591 {
 592         puts("Board: ");
 593         if (board_type == BOARD_IS_MARSBOARD)
 594                 puts("MarSBoard\n");
 595         else if (board_type == BOARD_IS_RIOTBOARD)
 596                 puts("RIoTboard\n");
 597         else
 598                 printf("unknown - cputype : %02x\n", cpu_type(get_cpu_rev()));
 599
 600         return 0;
 601 }