include/configs/colibri-imx6ull.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018-2019 Toradex AG
   4  *
   5  * Configuration settings for the Colibri iMX6ULL module.
   6  *
   7  * based on colibri_imx7.h
   8  */
   9
  10 #ifndef __COLIBRI_IMX6ULL_CONFIG_H
  11 #define __COLIBRI_IMX6ULL_CONFIG_H
  12
  13 #include "mx6_common.h"
  14 #define CONFIG_IOMUX_LPSR
  15
  16 #define PHYS_SDRAM_SIZE                 SZ_512M
  17
  18 /* Size of malloc() pool */
  19 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  20
  21 /* Network */
  22 #define CONFIG_TFTP_TSIZE
  23
  24 /* ENET1 */
  25 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
  26
  27 /* MMC Config */
  28 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  29 #define CONFIG_SYS_FSL_USDHC_NUM        1
  30
  31 /* I2C configs */
  32 #define CONFIG_SYS_I2C_SPEED            100000
  33
  34 #define CONFIG_IPADDR                   192.168.10.2
  35 #define CONFIG_NETMASK                  255.255.255.0
  36 #define CONFIG_SERVERIP                 192.168.10.1
  37
  38 #define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb"
  39
  40 #define MEM_LAYOUT_ENV_SETTINGS \
  41         "bootm_size=0x10000000\0" \
  42         "fdt_addr_r=0x82100000\0" \
  43         "kernel_addr_r=0x81000000\0" \
  44         "pxefile_addr_r=0x87100000\0" \
  45         "ramdisk_addr_r=0x82200000\0" \
  46         "scriptaddr=0x87000000\0"
  47
  48 #define UBOOT_UPDATE \
  49         "update_uboot=nand erase.part u-boot1 && " \
  50                 "nand write ${loadaddr} u-boot1 ${filesize} && " \
  51                 "nand erase.part u-boot2 && " \
  52                 "nand write ${loadaddr} u-boot2 ${filesize}\0"
  53
  54 #define NFS_BOOTCMD \
  55         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  56         "nfsboot=run setup; " \
  57                 "setenv bootargs ${defargs} ${nfsargs} " \
  58                 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
  59                 "dhcp ${kernel_addr_r} && " \
  60                 "tftp ${fdt_addr_r} " FDT_FILE " && " \
  61                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  62
  63 #define UBI_BOOTCMD \
  64         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
  65                 "ubi.fm_autoconvert=1\0" \
  66         "ubiboot=run setup; " \
  67                 "setenv bootargs ${defargs} ${ubiargs} " \
  68                 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
  69                 "ubi part ubi &&" \
  70                 "ubi read ${kernel_addr_r} kernel && " \
  71                 "ubi read ${fdt_addr_r} dtb && " \
  72                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  73
  74 #define CONFIG_BOOTCOMMAND "run ubiboot; " \
  75         "setenv fdtfile " FDT_FILE " && run distro_bootcmd;"
  76
  77 #define BOOT_TARGET_DEVICES(func) \
  78         func(MMC, mmc, 0) \
  79         func(USB, usb, 0) \
  80         func(DHCP, dhcp, na)
  81 #include <config_distro_bootcmd.h>
  82
  83 #define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
  84
  85 #define CONFIG_EXTRA_ENV_SETTINGS \
  86         BOOTENV \
  87         MEM_LAYOUT_ENV_SETTINGS \
  88         NFS_BOOTCMD \
  89         UBI_BOOTCMD \
  90         UBOOT_UPDATE \
  91         "console=ttymxc0\0" \
  92         "defargs=user_debug=30\0" \
  93         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
  94         "fdt_board=eval-v3\0" \
  95         "fdt_fixup=;\0" \
  96         "ip_dyn=yes\0" \
  97         "kernel_file=zImage\0" \
  98         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
  99         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 100                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 101                 "${board}/flash_eth.img && source ${loadaddr}\0" \
 102         "setsdupdate=mmc rescan && setenv interface mmc && " \
 103                 "fatload ${interface} 0:1 ${loadaddr} " \
 104                 "${board}/flash_blk.img && source ${loadaddr}\0" \
 105         "setup=setenv setupargs " \
 106                 "console=tty1 console=${console}" \
 107                 ",${baudrate}n8 ${memargs} consoleblank=0\0" \
 108         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 109         "setusbupdate=usb start && setenv interface usb && " \
 110                 "fatload ${interface} 0:1 ${loadaddr} " \
 111                 "${board}/flash_blk.img && source ${loadaddr}\0" \
 112         "splashpos=m,m\0" \
 113         "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
 114         "vidargs=video=mxsfb:640x480M-16@60"
 115
 116 #define CONFIG_SYS_MEMTEST_START        0x80000000
 117 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x08000000)
 118
 119 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 120
 121 /* Physical Memory Map */
 122 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 123
 124 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 125 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 126 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 127
 128 #define CONFIG_SYS_INIT_SP_OFFSET \
 129         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 130 #define CONFIG_SYS_INIT_SP_ADDR \
 131         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 132
 133 /* NAND stuff */
 134 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 135 /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
 136 #define CONFIG_SYS_NAND_BASE            -1
 137 #define CONFIG_SYS_NAND_ONFI_DETECTION
 138
 139 /* USB Configs */
 140 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 141
 142 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 143 #define CONFIG_MXC_USB_FLAGS            0
 144 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 145
 146 #define CONFIG_IMX_THERMAL
 147
 148 #define CONFIG_USBD_HS
 149
 150 /* USB Device Firmware Update support */
 151 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    SZ_16M
 152 #define DFU_DEFAULT_POLL_TIMEOUT        300
 153
 154 #if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
 155 #define CONFIG_VIDEO_MXS
 156 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 157 #define CONFIG_VIDEO_LOGO
 158 #define CONFIG_SPLASH_SCREEN
 159 #define CONFIG_SPLASH_SCREEN_ALIGN
 160 #define CONFIG_BMP_16BPP
 161 #define CONFIG_VIDEO_BMP_RLE8
 162 #define CONFIG_VIDEO_BMP_LOGO
 163 #endif
 164
 165 #endif /* __COLIBRI_IMX6ULL_CONFIG_H */