1 commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
3 Date: Fri Jul 4 20:07:35 2008 +0200
5 CCM/SCM boards: fix out of tree building
9 commit ab4c3a490df9a964711556d2a05b0c787db45fde
11 Date: Thu Jul 3 23:22:27 2008 +0200
13 SCM board: fix build errors.
17 commit a566466f17ba0e2d2b6c250e77da678fb932470d
19 Date: Thu Jul 3 23:06:36 2008 +0200
21 IAD210 board: fix ``"ALIGN" redefined'' warning.
25 commit ad756314797c16fa5dca23e115aab881011f164f
27 Date: Thu Jul 3 23:00:24 2008 +0200
29 CCM board: fix build errors.
33 commit ced209c50e80c25f13c083099b05044048d21f4f
35 Date: Thu Jul 3 22:39:21 2008 +0200
37 sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"
41 commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
43 Date: Thu Jul 3 22:34:08 2008 +0200
45 Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors
49 commit 730f298485984b011b6ee8f4acb511cb45a843dd
51 Date: Thu Jul 3 22:04:17 2008 +0200
53 lmb: fix "implicit declaration of function 'lmb_free'" warning
57 commit 322ef5e28d2dc62571afc699b00add22a8e006e4
59 Date: Wed Jul 2 23:53:23 2008 +0200
61 Cleanup: remove redundant deleting on *~ files
65 commit c8a3b109f07f02342d097b30908965f7261d9f15
67 Date: Wed Jul 2 23:49:18 2008 +0200
69 Cleanup out-or-tree building for some boards (.depend)
73 commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
75 Date: Wed Jul 2 23:38:50 2008 +0200
77 Cleanup: fix out-of-tree building for some boards
81 commit 461fa68d20861811487944d22291db5a13410e20
83 Date: Wed Jul 2 23:00:14 2008 +0200
85 Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)
89 commit 5981ebd32017e062b08aa6747cf591276f2db779
91 Date: Fri Jun 20 22:26:24 2008 +0200
93 fdt: Fix typo in variable name.
97 commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
99 Date: Thu Jun 19 11:11:19 2008 +0200
101 Add logos for RRvision board
105 commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
107 Date: Wed Jun 18 11:03:57 2008 +0200
109 mpc8260: add fdt_fixup_ethernet support
111 Add support for updating mac-address and local-mac-address in fdt for
116 commit f6a69559d64498a04e1e0b087a9b920e5775f866
118 Date: Thu Jun 12 13:24:42 2008 -0400
120 cmd_nvedit.c: clean up syntax highlighting
122 My text-editor (vim) has a bit of trouble syntax-highlighting the
123 cmd_nvedit.c file, because it apparently does not parse C
124 ifdef/else/endif. The following patch does not change the behavior of
125 the code at all, but does allow the editor to properly
126 syntax-highlight the file.
130 commit 75678c807a6272ecc5541eb32898c93887f08400
132 Date: Thu Jun 12 13:22:12 2008 -0400
134 Make setenv() return status
136 Currently, the setenv function does not return an error code.
137 This patch allows to test for errors.
141 commit 4928e97c8531283ca9b368b7c29a8a12e726562a
143 Date: Wed Jun 11 10:14:06 2008 -0500
145 PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
147 fls64, __ilog2_u64, ffs64 are variants that work on an u64,
148 and fls is used to implement them.
152 commit 83002a77cbdf383015ca384eff5fa31722d8e571
154 Date: Mon Jun 9 22:58:48 2008 +0200
156 i.MX31: Cleanup comments in lowlevel_init.S.
160 commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
162 Date: Sun Jun 8 23:28:33 2008 -0700
164 Move conditional compilation of MPC8XXX SPI driver to Makefile
168 commit d92ea21bafb674ee2bf27447970b047845e7b0a2
170 Date: Sun Jun 8 17:59:53 2008 +0200
172 i.MX31: fixed CTRL-C detection
174 The Register URXD contains status information in bits [15..8].
175 With status bit 15 set, CTRL-C was reported as 0x8003 instead
176 of 0x03. Therefore CTRL-C was not detected.
177 To solve this, bits [15..8] were masked out now.
182 commit b571afde0295b007a45055ee49f8822c753a5651
184 Date: Sat Jun 7 12:29:52 2008 +0200
191 commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
193 Date: Fri Jun 6 23:07:40 2008 +0200
195 Delay FIT format check on sector based devices
197 Global FIT image operations like format check cannot be performed on
198 a first sector data, defer them to the point when whole FIT image was
199 uploaded to a system RAM.
205 commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
207 Date: Tue Jun 3 17:38:19 2008 +0800
209 sata: wait for device updating signature to host
211 The driver need wait for the device updating signature to host.
212 If we don't wait for it, the driver can not detect the device(disk)
213 when the system powers up.
217 commit 8b616edb118e37d05f6401389eaee1c636b22828
219 Date: Mon Jun 2 16:42:19 2008 -0400
221 serial_pl010.c: add watchdog support
225 commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
227 Date: Mon Jun 2 16:40:08 2008 -0400
229 jffs2_1pass.c: add watchdog support
233 commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
235 Date: Fri May 30 09:48:14 2008 +0200
237 Configure DSP POST; add watchdog reset to diag command
241 commit f13526517859bf6b573e23ff47199e107d1009b5
243 Date: Thu May 29 10:40:17 2008 +0200
245 Add sata sil3114 support
249 commit e093a247628228100f405b6d7f6b1bfc16141938
251 Date: Sat Jun 28 23:34:37 2008 +0200
257 commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
259 Date: Sat Jun 28 23:16:01 2008 +0200
265 commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
267 Date: Wed May 21 13:58:41 2008 -0400
269 ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
271 This patch adds support for the Lyrtech SFF-SDR board,
272 based on the TI DaVinci architecture (ARM926EJS).
278 commit 341188b9ccaa8d4462d772cc067aca8d7618633a
280 Date: Thu May 22 11:09:59 2008 +0200
282 MMC: Consolidate MMC/SD command definitions
284 This moves the MMC and SD Card command definitions from
285 include/asm/arch/mmc.h into include/mmc.h. These definitions are
286 given by the MMC and SD Card standards, not by any particular
289 There's a lot more room for consolidation in the MMC drivers which
290 I'm hoping to get done eventually, but this patch is a start.
292 Compile-tested for all avr32 boards as well as lpc2292sodimm and
293 lubbock. This should cover all three mmc drivers in the tree.
297 commit fa60edfc4c952626e048c0e065f654b3c1822fa5
299 Date: Wed May 21 14:38:08 2008 +0900
301 Use better Ethernet timings for apollon board
305 commit 41c5eaa7253ed82bbae1eda5667755872c615164
307 Date: Mon Jun 16 13:58:56 2008 -0500
309 Resize device tree to allow space for board changes and the chosen node
311 Current code requires that a compiled device tree have space added to the end to
312 leave room for extra nodes added by board code (and the chosen node). This
313 requires that device tree creators anticipate how much space U-Boot will add to
314 the tree, which is absurd. Ideally, the code would resize and/or relocate the
315 tree when it needed more space, but this would require a systemic change to the
316 fdt code, which is non-trivial. Instead, we resize the tree inside
317 boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
318 where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
322 commit 7570a9941fc565922078679a72d246fe208d696d
324 Date: Mon Jun 16 13:58:55 2008 -0500
326 Fix an underflow bug in __lmb_alloc_base
328 __lmb_alloc_base can underflow if it fails to find free space. This was fixed
329 in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch
330 merely updates __lmb_alloc_base to resemble the current version in Linux.
334 commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
336 Date: Mon Jun 16 13:58:54 2008 -0500
340 lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
341 lmb_reserve to temporarily reserve some memory.
345 commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
347 Date: Mon Jun 16 13:58:53 2008 -0500
351 ALIGN() returns the smallest aligned value greater than the passed
352 in address or size. Taken from Linux.
356 commit 28eab0d77352b84885f938759bf2612b7bf0bc44
358 Date: Mon May 19 12:26:38 2008 +0200
360 Conditionally add -fno-stack-protector to CFLAGS
362 When compile-testing on powerpc, I get errors like this:
364 net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
366 This seems to be because -fstack-protector is on by default, so
367 let's explicitly disable it on all architectures that support the
370 The Ubuntu toolchain is affected by this problem, and according to
371 Mike Frysinger, Gentoo has been running with SSP enabled for years.
372 More and more distros are turning SSP on by default, so this problem
373 is likely to get worse in the future.
375 Also, powerpc just happens to be one of the arches I do
376 compile-testing on. There may be other arches affected by this too.
380 commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
382 Date: Sun May 18 19:09:52 2008 +0200
384 pcmcia/ti_pci1410a: Move compile condition to the Makefile
388 commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
390 Date: Sun May 18 19:09:51 2008 +0200
392 pxa_pcmcia: Move compile condition to the Makefile
396 commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
398 Date: Sun May 18 19:09:50 2008 +0200
400 marabun_pcmcia: Move compile condition to the Makefile
404 commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
406 Date: Thu Jun 5 13:02:30 2008 +0200
408 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
410 This patch is based on the following patch sent a few minutes ago:
411 "NAND FSL UPM: driver re-write using the hwcontrol callback"
412 It is untested, of course. Anton, could you please give it a try.
417 commit 96026d42fa4e646d28318c0a1438aac4b2017909
419 Date: Thu Jun 12 12:40:11 2008 +0200
423 Building for 4xx doesn't work since commit 4dbdb768:
425 In file included from 4xx_pcie.c:28:
426 include/asm/processor.h:971: error: expected ')' before 'ver'
427 make[1]: *** [4xx_pcie.o] Error 1
429 This patch fixes the problem.
435 commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
437 Date: Mon Jun 16 10:40:02 2008 +0200
439 cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
441 This patch simplifies flash_toggle() (AMD commandset), which is used to
442 detect if a FLASH device is still busy with erase/program operations. On
443 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
444 did not detect the busy state reliably, resulting in non erased sectors
445 etc. This patch now simplifies this function by "just" comparing the
446 complete data-word instead of ANDing it with the command-word (0x40)
447 before the compatison. It is done the same way in the Linux implementation
448 chip_ready() in cfi_cmdset_0002.c.
452 commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
454 Date: Mon Jun 16 08:58:07 2008 -0400
456 NAND: Add missing declaration to non-redundant saveenv().
460 commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
462 Date: Mon Jun 2 15:09:55 2008 +0200
464 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
470 commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
472 Date: Tue Jun 10 15:34:11 2008 +0200
474 ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
476 This patch disables the square wave output of the M41T62 RTC used on
477 Canyonlands & Glacier. Here the explanation:
479 The serial real-time clock part used in the design is an
480 STMicro M41T62. This part has a full-time 32KHz square wave
481 output that is connected to the TmrClk input to the
482 processor. The default state for this square wave output is
483 enabled so the output runs continuously when the board is
484 powered normally and also from the battery. The TmrClk input
485 to the processor goes to ground when the power is removed
486 from the board/processor, and therefore the running square
487 wave output is driving ground which drains the battery quickly.
491 commit a94f22f08f280905926219e568568964cb9eeb9d
493 Date: Wed Jun 11 18:10:20 2008 -0500
495 Fix build issue with string.h and linux/string.h
498 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
500 Date: Fri Jun 6 14:28:14 2008 +0200
502 tools/mkimage: fix compiler warnings on some systems.
504 Broke building on some systems, because the host's string.h was interfering
505 with u-boot's linux/string.h. It doesn't look like we need the u-boot one if
506 we're building for the host, so now we only include when building inside
511 commit 9973e3c614721bbf169882ffc3be266a6611cd60
513 Date: Mon Jun 9 16:03:40 2008 -0500
515 Change initdram() return type to phys_size_t
517 This patch changes the return type of initdram() from long int to phys_size_t.
518 This is required for a couple of reasons: long int limits the amount of dram
519 to 2GB, and u-boot in general is moving over to phys_size_t to represent the
520 size of physical memory. phys_size_t is defined as an unsigned long on almost
521 all current platforms.
523 This patch *only* changes the return type of the initdram function (in
524 include/common.h, as well as in each board's implementation of initdram). It
525 does not actually modify the code inside the function on any of the platforms;
526 platforms which wish to support more than 2GB of DRAM will need to modify
527 their initdram() function code.
529 Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
534 commit 391fd93ab23e15ab3dd58a54f5b609024009c378
536 Date: Mon Jun 9 20:37:18 2008 -0500
538 Change lmb to use phys_size_t/phys_addr_t
540 This updates the lmb code to use phys_size_t
541 and phys_addr_t instead of unsigned long. Other code
542 which interacts with this code, like getenv_bootm_size()
545 Booted on MPC8641HPCN, build-tested ppc, arm, mips.
549 commit 61b09fc2952dc636017df4e7970e3de132276ba1
551 Date: Mon Jun 9 20:37:17 2008 -0500
553 Change print_size to take phys_size_t
557 commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
559 Date: Mon Jun 9 20:37:16 2008 -0500
561 Change bd/gd memsize/ram_size to be phys_size_t.
563 Currently, both are defined as an unsigned long, but
564 should be phys_size_t. This should result in no real change,
565 since phys_size_t is currently an unsigned long for all the
566 default configs. Also add print_lnum to cmd_bdinfo to deal
567 with the potentially wider memsize.
571 commit ba04f7010958e88a8910f2a123fee53fdc72e013
573 Date: Tue Jun 10 16:16:02 2008 -0500
575 FSL LAW: Add new interface to use the last free LAW
577 LAWs have the concept of priority so its useful to be able to allocate
578 the lowest (highest number) priority. We will end up using this with the
583 commit 859a86a25c569d3665ff413d1d923394b8a961f3
585 Date: Wed Jun 11 00:51:45 2008 -0500
587 85xx/86xx: Move to dynamic mgmt of LAWs
589 With the new LAW interface (set_next_law) we can move to letting the
590 system allocate which LAWs are used for what purpose. This makes life
591 a bit easier going forward with the new DDR code.
598 commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
600 Date: Wed Jun 11 00:44:10 2008 -0500
602 FSL LAW: Keep track of LAW allocations
604 Make it so we keep track of which LAWs have allocated and provide
605 a function (set_next_law) which can allocate a LAW for us if one is
608 In the future we will move to doing more "dynamic" LAW allocation
609 since the majority of users dont really care about what LAW number
612 Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
617 commit ddde74a159caa6e18b481fec01d40b885aebb566
619 Date: Mon Jun 9 22:31:57 2008 -0500
621 85xx: remove dummy board_early_init_f
623 A number of board ports have empty version of board_early_init_f
624 for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
628 commit 81e56e9af0d43712db8efb843606a8d62eab454f
630 Date: Mon Jun 9 18:55:38 2008 -0500
632 MPC8544DS: Update config.h
634 * Enable flash progress
635 * remove CLEAR_LAW0 since we dont really use it
639 commit 978e81604c1b28526ed580df0fbe64eb8384e94f
641 Date: Mon Jun 9 13:37:24 2008 -0500
643 85xx: Remove unused and unconfigured memory test code.
645 Remove unused and unconfigured DDR test code from FSL 85xx boards.
646 Besides, other common code exists.
650 commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
652 Date: Fri Jun 6 15:42:45 2008 +0200
654 Socrates: Added FPGA base address update in FDT.
658 commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
660 Date: Fri Jun 6 15:42:44 2008 +0200
662 Socrates: NAND support added. Changed the U-Boot base address and
666 commit 248ae5cfc8bf69074d1da099dc495d8e06070547
668 Date: Fri Jun 6 15:42:43 2008 +0200
670 NAND: Added support for 128-bit OOB, adapted
674 commit 31ca0208612f2eb57690110d7c2815953650e47b
676 Date: Fri Jun 6 15:42:42 2008 +0200
678 Socrates: added missed file with UPMA configuration data.
682 commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
684 Date: Fri Jun 6 15:42:41 2008 +0200
686 Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
690 commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
692 Date: Fri Jun 6 15:42:40 2008 +0200
694 Added the upmconfig() function for 85xx.
699 commit d39e68514ff943930ee692cff3fde03532eb7fec
701 Date: Fri Jun 6 15:42:39 2008 +0200
703 Socrates: config file cleanup.
707 commit e8cc3f04b124f757af4528206e60d8eb715ae083
709 Date: Thu Jun 5 13:12:10 2008 +0200
711 TQM85xx: Change memory map to support Flash memory > 128 MiB
713 Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
714 memory. The current memory map only supports up to 128 MiB Flash.
715 This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
716 set, up to 1 GiB flash is supported. To achieve this, the memory
717 map has to be adjusted in great parts (for example the CCSRBAR is
718 moved from 0xE0000000 to 0xA0000000).
720 If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
721 memory map also has to be considered in the kernel (changed
722 CCSRBAR address, changed PCI IO base address, ...). Please use
723 an appropriate Flat Device Tree blob (tqm8548.dtb).
728 commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
730 Date: Thu Jun 5 13:12:09 2008 +0200
732 TQM85xx: NAND support via local bus UPMB
734 This patch adds support for NAND FLASH on the TQM8548. It is disabled by
735 default and can be enabled for the TQM8548 modules. It is now based on
736 the re-written FSL NAND UPM driver. A patch has been posted earlier today
739 "NAND FSL UPM: driver re-write using the hwcontrol callback"
741 Note that the R/B pin is not supported by that module requiring to use
742 the specified maximum delay time.
744 Note: With NAND support enabled the size of the U-Boot image exceeds
745 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
746 doubling the image size :-(.
751 commit b9e8078bb3f3c48111a7081e27279938c3a445e1
753 Date: Thu Jun 5 13:12:08 2008 +0200
755 TQM8548: PCI express support
757 This patch adds support for PCI express cards. The board support
758 now uses common FSL PCI init code, for both, PCI and PCIe on all
764 commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
766 Date: Thu Jun 5 13:12:07 2008 +0200
768 TQM8548: Basic support for the TQM8548 modules
770 This patch adds basic support for the TQM8548 module from TQ-Components
771 (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
774 Furthermore Flash buffer write has been enabled to speed up output to
775 the Flash by approx. a factor of 10.
780 commit 25991353204c78b094c3c1fec90182dcd607ab8f
782 Date: Thu Jun 5 13:12:06 2008 +0200
784 TQM85xx: Support for Flat Device Tree
786 This patch adds support for Linux kernels using the Flat Device Tree.
787 It also re-defines the default environment settings for booting Linux
792 commit d9ee843d54c54776e1fdb86336ce554906a87331
794 Date: Thu Jun 5 13:12:05 2008 +0200
796 TQM85xx: Support for Intel 82527 compatible CAN controller
798 This patch adds initialization of the UPMC RAM to support up to two
799 Intel 82527 compatible CAN controller on the TQM85xx modules.
804 commit 518d5cfe72916323c746af1647764459914f555f
806 Date: Thu Jun 5 13:12:04 2008 +0200
808 TQM85xx: Bugfix in the SDRAM initialisation
810 The CS0_BNDS register is now set according to the detected
815 commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
817 Date: Thu Jun 5 13:12:03 2008 +0200
819 TQM85xx: Fix chip select configuration for second FLASH bank
821 This patch fixes the re-calculation of the automatic chip select
822 configuration for boards with two populated FLASH banks.
826 commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
828 Date: Thu Jun 5 13:12:02 2008 +0200
830 TQM85xx: Support for Spansion 'N' type flashes added
832 The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
833 than the formerly used 'M' types (S29GLxxxM series), so the flash layout
834 needs to be changed -> new start address of the environment. The macro
835 definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
836 defined for boards with 'N' type flashes.
841 commit 5d5bd838f76eade22c0ea40a500389f924d0da36
843 Date: Thu Jun 5 13:12:01 2008 +0200
845 TQM85xx: Fix CPM port pin configuration
847 Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
848 board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
849 as serial interface anyway. Worse, on some board variants configuring the
850 pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
854 commit b99ba1679e8cd51b023e67098c89e606e47137d2
856 Date: Thu Jun 5 13:12:00 2008 +0200
858 TQM85xx: Various coding style fixes
862 commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
864 Date: Tue Jun 10 22:15:58 2008 -0400
866 libfdt: Move the working_fdt pointer to cmd_fdt.c
868 The working_fdt pointer was declared in common/fdt_support.c but was
869 not used there. Move it to common/cmd_fdt.c where it is used (it is
870 also used in lib_ppc/bootm.c).
874 commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
876 Date: Tue Jun 10 11:06:17 2008 -0500
878 fdt: unshadow global working fdt variable
880 differentiate with local variables of the same name by renaming the
881 global 'fdt' variable 'working_fdt'.
885 commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
887 Date: Tue Jun 10 18:49:34 2008 -0500
889 socrates: Fix PCI clk fix patch
891 The submitted patch seems to have been more up-to-date, but an older patch was
892 already in the repository. This patch encompasses the differences
898 commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
900 Date: Thu Jun 5 13:02:29 2008 +0200
902 NAND FSL UPM: driver re-write using the hwcontrol callback
904 This is a re-write of the NAND FSL UPM driver using the more universal
905 hwcontrol callback (instead of the cmdfunc callback). Here is a brief
906 list of furher modifications:
908 - For the time being, the UPM setup writing the UPM array has been
909 removed from the driver and must now be done by the board specific
912 - The bus width definition in "struct fsl_upm_nand" is now in bits to
913 comply with the corresponding Linux driver and 8, 16 and 32 bit
914 accesses are supported.
916 - chip->dev_read is only set if fun->dev_ready != NULL, which is
917 required for boards not connecting the R/B pin.
919 - A few issue have been fixed with MxMR bit manipulation like in the
920 corresponding Linux driver.
922 Note: I think the "io_addr" field of "struct fsl_upm" could be removed
923 as well, because the address is already determined by
924 "nand->IO_ADDR_[RW]", but I'm not 100% sure.
926 This patch has been tested on a TQM8548 modules with the NAND chip
927 Micron MT29F8G08FABWP.
929 This patch is based on the following patches posted to this list a few
932 PPC: add accessor macros to clear and set bits in one shot
933 83xx/85xx/86xx: add more MxMR local bus definitions
938 commit 6beecfbb542992eede5831240cd58678274683a9
940 Date: Thu Jun 5 13:11:59 2008 +0200
942 MPC85xx: Beautify boot output of L2 cache configuration
944 The boot output is now aligned poperly with other boot output
952 commit 398415114f0a705163a14543e9fef03f734b1ffa
954 Date: Wed Jun 4 12:45:22 2008 +0200
956 PPC: add accessor macros to clear and set bits in one shot
958 PPC: add accessor macros to clear and set bits in one shot
960 This patch adds macros from linux/include/asm-powerpc/io.h to clear and
961 set bits in one shot using the in_be32, out_be32, etc. accessor functions.
962 They are very handy to manipulate bits it I/O registers.
964 This patch is required for my forthcoming FSL NAND UPM driver re-write and
965 the support for the TQM8548 module.
969 commit 4677988c7edc070c3786d3db7994abeca3ab82a0
971 Date: Wed Jun 4 13:52:17 2008 +0200
973 TQM: move TQM boards to board/tqc
975 Move all TQM board directories to the vendor specific directory "tqc"
976 for modules from TQ-Components GmbH (http://www.tqc.de).
980 commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
982 Date: Mon Jun 2 12:09:30 2008 +0200
984 83xx/85xx/86xx: add more MxMR local bus definitions
986 83xx/85xx/86xx: add more MxMR local bus definitions
988 This patch adds more macro definitions for the UPM Machine Mode Registers
989 They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
990 common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
991 required for my forthcoming FSL NAND UPM driver re-write and the support
992 for the TQM8548 module.
994 This patch is based on the following two patches from Anton Vorontsov:
999 I leave coding style violation fixes, code beautification and name
1000 corrections to somebody else ;-(.
1004 commit c8c5fc266e4499e283c293ccb972863156aa4134
1006 Date: Thu May 29 18:14:56 2008 +0400
1008 83xx/85xx: further localbus cleanups
1010 Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
1011 from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
1015 commit 42dbd667c88d496882d53e22656e89b654205492
1017 Date: Wed May 28 18:20:15 2008 +0400
1019 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
1021 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
1022 use it on MPC85xx and MPC86xx processors.
1026 commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
1028 Date: Thu May 29 11:22:06 2008 -0500
1030 85xx: Add setting of cache props in the device tree.
1034 commit 4dbdb7681e243431530df0725627192a0c4aefda
1036 Date: Tue Jun 10 16:53:46 2008 -0500
1038 85xx: expose cpu identification
1040 The current cpu identification code is used just to return the name
1041 of the processor at boot. There are some other locations that the name
1042 is useful (device tree setup). Expose the functionality to other bits
1045 Also, drop the 'E' suffix and add it on by looking at the SVR version
1046 when we print this out. This is mainly to allow the most flexible use
1047 of the name. The device tree code tends to not care about the 'E' suffix.
1051 commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
1053 Date: Tue Jun 10 13:25:24 2008 -0500
1055 mpc83xx: MVBLM7: minor build fixups
1059 commit a1293e549b56da135ef32ffca5b9d35a16aa6802
1061 Date: Tue Jun 10 09:14:05 2008 +0200
1063 add MPC8343 based board mvBlueLYNX-M7 (board+make files)
1065 Add MPC8343 based board mvBlueLYNX-M7.
1066 It's a single board stereo camera system.
1067 Please read doc/README.mvblm7 for details.
1072 commit c005b93925ba49f07da2aa748527996d927e172f
1074 Date: Tue Jun 10 09:13:16 2008 +0200
1076 add MPC8343 based board mvBlueLYNX-M7 (doc+config)
1078 Add MPC8343 based board mvBlueLYNX-M7.
1079 It's a single board stereo camera system.
1080 Please read doc/README.mvblm7 for details.
1085 commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
1087 Date: Thu May 29 18:14:56 2008 +0400
1089 83xx/85xx: further localbus cleanups
1091 move the BRx_* and ORx_* left behind in mpc85xx.h
1093 The same is needed for mpc8xx.h and mpc8260.h (defines are almost
1094 the same, just few differences which needs some attention though).
1096 But the bad news for mpc8xx and mpc8260 is that there are a lot of users
1097 of these defines. So this cleanup I'll leave for the "better times".
1102 commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
1104 Date: Wed May 28 18:20:15 2008 +0400
1106 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
1108 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
1109 use it on MPC85xx and MPC86xx processors.
1115 commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
1117 Date: Mon Jun 2 15:09:30 2008 +0200
1119 Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
1124 commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
1126 Date: Mon Jun 9 23:37:44 2008 +0900
1128 net: Conditional COBJS inclusion of network drivers
1130 Replace COBJS-y with appropriate driver config names.
1135 commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
1137 Date: Mon Jun 9 21:02:17 2008 -0400
1139 Use strncmp() for the fdt command
1141 Cleaner than doing multiple conditionals on characters.
1145 commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
1147 Date: Sat Jun 7 12:25:05 2008 -0400
1149 The fdt boardsetup command criteria was not unique
1151 It was checking just for "b", which is not unique with respect to the
1152 "boot" command. Change to check for "boa"[rdsetup].
1156 commit 2f08bfa9526bae4f461e043530cfb903fec0d273
1158 Date: Tue May 20 17:19:11 2008 +1000
1160 libfdt: Several cleanups to parameter checking
1162 This patch makes a couple of small cleanups to parameter checking of
1165 - In several functions which take a node offset, we use an
1166 idiom involving fdt_next_tag() first to check that we have indeed been
1167 given a node offset. This patch adds a helper function
1168 _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
1170 - In fdt_rw.c in several places we have the expanded version
1171 of the RW_CHECK_HEADER() macro for no particular reason. This patch
1172 replaces those instances with an invocation of the macro; that's what
1175 - In fdt_sw.c we rename the check_header_sw() function to
1176 sw_check_header() to match the analgous function in fdt_rw.c, and we
1177 provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
1178 functions in fdt_rw.c
1182 commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
1184 Date: Tue Jun 3 20:34:45 2008 -0400
1186 Remove the deprecated CONFIG_OF_FLAT_TREE
1188 Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is
1189 cleaner, has better functionality, and is better supported.
1193 commit 62bcdda293efa752f8281fbd9da03822b27ce82f
1195 Date: Tue Jun 3 20:26:29 2008 -0400
1197 Change the stxxst to CONFIG_OF_LIBFDT
1199 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
1200 to CONFIG_OF_LIBFDT.
1202 WARNING: It appears that this board lost its ability to boot via a
1203 flattened device tree prior to this changeset.
1205 WARNING: This conversion was untested because I do not have a board to
1210 commit 589c04271d129729a8b01391453851ab9cc4069c
1212 Date: Tue Jun 3 20:24:58 2008 -0400
1214 Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
1216 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
1217 to CONFIG_OF_LIBFDT.
1219 WARNING: This conversion is untested because I do not have a board to
1222 NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
1223 /aliases/ethernet1 property for the ethernet to work.
1227 commit ee1e35bede91debc8bff9b02f75574486033b652
1229 Date: Thu May 29 01:21:24 2008 -0500
1231 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
1235 commit 3b9519fc50802436e417c839e69df7b2016cade5
1237 Date: Wed May 14 13:10:04 2008 -0500
1239 MPC85xx: Change traps.c to not reference non-addressable memory
1241 Currently, END_OF_RAM is used by the trap code to determine if
1242 we should attempt to access the stack pointer or not. However,
1243 on systems with a lot of RAM, only a subset of the RAM is
1244 guaranteed to be mapped in and accessible. Change END_OF_RAM
1245 to use get_effective_memsize() instead of using the raw ram
1250 commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
1252 Date: Mon Jun 9 13:39:57 2008 +0900
1254 sh: Renesas Solutions SH7763RDP board support
1256 SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
1257 In this patch, support SCIF, NOR Flash, and Ethernet.
1262 commit 60179098a95eaa972007d7ec58e4c1588029720f
1264 Date: Fri Jun 6 16:24:13 2008 +0900
1266 sh: Add support Renesas SH7763
1268 Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
1269 This patch supprts CPU register's header file.
1274 commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
1276 Date: Fri Jun 6 16:16:08 2008 +0900
1278 sh: SH7763 SCIF support
1280 SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
1281 but only SCIF2 is different. This patch work all SCIF channel.
1286 commit 79b51ff8205f0354d5300570614c1d2db499679c
1288 Date: Sat Jun 7 20:51:59 2008 +0900
1290 [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
1292 Also get rid of some #ifdefs in *.c files.
1296 commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
1298 Date: Sat Jun 7 20:51:56 2008 +0900
1300 [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
1304 Common Alchemy Au1x00 stuff. All Alchemy processor based machines
1305 need to have this config as a system type specifier.
1307 CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
1308 CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
1310 Machine type specifiers. Each port should have one of aboves.
1314 commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
1316 Date: Fri May 30 16:05:28 2008 -0400
1318 env_nand.c: Added bad block management for environment variables
1320 Modified to check for bad blocks and to skipping over them when
1321 CFG_ENV_RANGE has been defined.
1322 CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
1328 commit 279726bd00558e80263d44581c44167625b7fb9a
1330 Date: Wed May 14 13:09:58 2008 -0500
1332 MPC86xx: Change traps.c to not reference non-addressable memory
1334 Currently, END_OF_RAM is used by the trap code to determine if
1335 we should attempt to access the stack pointer or not. However,
1336 on systems with a lot of RAM, only a subset of the RAM is
1337 guaranteed to be mapped in and accessible. Change END_OF_RAM
1338 to use get_effective_memsize() instead of using the raw ram
1339 size out of the bd to prevent us from trying to access
1344 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
1346 Date: Fri Jun 6 14:28:14 2008 +0200
1348 tools/mkimage: fix compiler warnings on some systems.
1352 commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
1354 Date: Fri Jun 6 16:10:41 2008 +0200
1356 ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
1358 We use upper case letters for the AMCC processor defines (like
1359 CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
1360 not CONFIG_440SPe. This patch fixes the last misspelled config options.
1364 commit 72675dc6c06a48846d180106161d49dd714383cc
1366 Date: Fri Jun 6 15:55:21 2008 +0200
1368 ppc4xx: Unify AMCC's board config files (part 3/3)
1370 This patch series unifies the AMCC eval board ports by introducing
1371 a common include header for all AMCC eval boards:
1373 include/configs/amcc-common.h
1375 This header now includes all common configuration options/defines which
1376 are removed from the board specific headers.
1378 The reason for this is ease of maintenance and unified look and feel
1383 commit 490f204096d6e2c9940f67816f154a8125bab116
1385 Date: Fri Jun 6 15:55:03 2008 +0200
1387 ppc4xx: Unify AMCC's board config files (part 2/3)
1389 This patch series unifies the AMCC eval board ports by introducing
1390 a common include header for all AMCC eval boards:
1392 include/configs/amcc-common.h
1394 This header now includes all common configuration options/defines which
1395 are removed from the board specific headers.
1397 The reason for this is ease of maintenance and unified look and feel
1402 commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
1404 Date: Fri Jun 6 15:54:31 2008 +0200
1406 ppc4xx: Unify AMCC's board config files (part 1/3)
1408 This patch series unifies the AMCC eval board ports by introducing
1409 a common include header for all AMCC eval boards:
1411 include/configs/amcc-common.h
1413 This header now includes all common configuration options/defines which
1414 are removed from the board specific headers.
1416 The reason for this is ease of maintenance and unified look and feel
1421 commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
1423 Date: Thu Jun 5 13:03:36 2008 +0200
1425 DM9000 fix status check fail 0x6d error for trizeps board
1427 According to the Application Notes of the DM9000, only the 2 bits 0:1 of
1428 the status byte need to be checked to identify a valid packet in the fifo
1430 But, The several different Application Notes do not all speak the same
1431 language on these bits. They do not disagree, but only 1 Application Note
1432 noted explicitly that only these 2 bits need to be checked.
1433 Even the datasheets do not mention anything about these 2 bits.
1435 Because the old code, and the kernel check the whole byte, I left this piece
1438 However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
1441 Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
1442 in the fifo) is much shorter now, compared to the older U-boot driver code,
1443 so that we can maybe run into a hardware condition now that was never seen
1444 before, or maybe was seen very unfrequently.
1446 Additionaly added a cleanup of a stack variable.
1451 commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
1453 Date: Thu Jun 5 22:29:00 2008 +0900
1455 [MIPS] Update <asm/addrspace.h> header
1457 - Fix traditional KSEG names
1458 - Replace PHYSADDR with CPHYSADDR
1462 commit f0d5a6f060d00358b85c62a921a423ea8df71184
1464 Date: Thu Jun 5 22:29:00 2008 +0900
1466 [MIPS] mips_config.mk: Misc fixes
1468 - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
1473 commit 5f64d21c9a2998794f255b469165b91f092dfc2d
1475 Date: Thu Jun 5 22:29:00 2008 +0900
1477 [MIPS] Kill unused <version.h> inclusions
1481 commit a55d48174cfd1a5bc184159513f48dcbbe409c83
1483 Date: Thu Jun 5 22:29:00 2008 +0900
1485 [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
1487 MIPS port has two problems in timer routines. One is now we assume CFG_HZ
1488 equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
1489 in the U-Boot system.
1491 The other is we don't have a proper time management counter like timestamp
1492 other ARCHs have. We need the 32-bit millisecond clock counter.
1494 This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
1495 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
1496 of calculated CP0 counter cycles in a CFG_HZ.
1500 * Fix improper CFG_HZ value to have 1000
1502 * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
1504 * timer_init: initialize timestamp and set up the first timer expiration.
1505 Note that we don't need to initialize CP0 count/compare registers here
1506 as they have been already zeroed out on the system reset. Leave them as
1509 * get_timer: calculate how many timestamps have been passed, then return
1510 base-relative timestamp. Make sure we can easily count missed timestamps
1511 regardless of CP0 count/compare value.
1513 * get_ticks: return the current timestamp, that is get_timer(0).
1515 Most parts are from good old Linux v2.6.16 kernel.
1518 - Remove FIXME comments as they turned out to be trivial.
1519 - Use CP0 compare register as a global variable for expirelo.
1520 - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
1525 commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
1527 Date: Thu Jun 5 22:29:00 2008 +0900
1529 [MIPS] lib_mips/time.c: Fix udelay
1531 What we have to do is just to wait for given micro-seconds. No need to
1532 take into account current time, get_timer and CFG_HZ.
1536 commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
1538 Date: Thu Jun 5 22:28:59 2008 +0900
1540 [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
1542 We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
1543 This patch replaces mips_{compare,count}_set and mips_count_get with
1548 commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
1550 Date: Tue Jun 3 15:48:17 2008 +0200
1552 Get rid of annoying/superfluous bad-checksum warning message
1554 U-boot can complain a lot about 'checksum bad' when it is attached to the network.
1555 It is annoying for ordinary users who start to doubt the network connection
1556 in general when they see messages like this.
1558 This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
1559 than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
1560 now before checking the checksum.
1565 commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
1567 Date: Wed Jun 4 10:47:25 2008 +0200
1569 Fix order for reading rx-status registers in 32bit mode of DM9000
1571 A last minute cleanup before submitting the DM9000A patch series yesterday introduced
1572 a bug in reading the rx-status registers in 32bit mode only.
1573 This patch repairs this.
1578 commit 98291e2e689096420465074cce926b226d2e71b4
1580 Date: Tue Jun 3 15:26:26 2008 +0200
1582 DM9000: Some minor code cleanups
1584 Some lines of the U-boot DM9000x driver are longer than 80 characters, or
1585 need some other minor cleanup.
1590 commit 850ba7555dbd4ca8d14fc475b864d534797adab3
1592 Date: Tue Jun 3 15:26:25 2008 +0200
1594 DM9000: Make driver work properly for DM9000A
1596 The DM9000A network controller does not work with the U-boot DM9000x driver.
1597 Analysis showed that many incoming packets are lost.
1599 The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
1600 check for a valid rx packet be done on the interrupt status register, not
1601 directly by performing the dummy read and the rx status check as is currently
1602 the case in the u-boot driver.
1604 When the recommended poll is done as suggested the driver starts working
1605 correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
1606 can be more than 1 package in the fifo at the same time.
1608 The driver must perform the rx-status check in a loop and read and handle all
1609 packages until there is no more left _after_ the interrupt RX flag is set.
1611 This change has been tested with DM9000A, DM9000E, DM9000EP.
1616 commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
1618 Date: Tue Jun 3 15:26:24 2008 +0200
1620 DM9000: Improve eth_reset() routine
1622 According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
1623 reset procedure must be done twice to properly reset the DM9000 by means of software.
1624 This errata is not needed anymore for the DM9000A, but it does not bother it.
1626 This change has been tested with DM9000A, DM9000E, DM9000EP.
1631 commit acba31847fad9ae40708cc2c9f3a634ec35f3416
1633 Date: Tue Jun 3 15:26:23 2008 +0200
1635 DM9000: improve eth_send() routine
1637 The eth_send routine of the U-boot DM9000x driver does not match the
1638 DM9000 or DM9000A application notes/programming guides.
1640 This change improves the stability of the DM9000A network controller.
1642 This change has been tested with DM9000A, DM9000E, DM9000EP.
1647 commit 134e266253c02a7832560da59d394989c4f64453
1649 Date: Tue Jun 3 15:26:22 2008 +0200
1651 DM9000: repair debug logging
1653 It seems that the debugging code of the DM9000x driver in U-boot has not been
1654 compiled for a long time, because it cannot compile...
1656 Also rearranged some loglines to get more useful info while debugging.
1661 commit a101361bfe23c120321e45d114c0603b8e0763e9
1663 Date: Tue Jun 3 15:26:21 2008 +0200
1665 DM9000: Add data bus-width auto detection.
1667 The U-boot DM9000x driver contains a compile time bus-width definition for
1668 the databus connected to the network controller.
1670 This compile check makes the code unclear, inflexible and is unneccessary.
1671 It can be asked to the network controller what its bus-width is by reading bits
1672 6 and 7 of the interrupt status register.
1674 The linux kernel already uses a runtime mechanism to determine this bus-width,
1675 so the implementation below looks somewhat like that implementation.
1677 This change has been tested with DM9000A, DM9000E, DM9000EP.
1682 commit 63a0afa0c32e5f4ea98a9439542870072437404d
1684 Date: Wed Jun 4 19:19:20 2008 +0200
1686 ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
1688 This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
1689 introduced by the commit:
1691 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
1693 With this patch SDRAM will get initialized again and booting from NAND
1699 commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
1701 Date: Tue May 27 14:19:30 2008 +0200
1703 Socrates: Fix PCI bus frequency report
1707 commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
1709 Date: Thu May 29 11:10:30 2008 +0200
1711 Fix incorrect switch for IF_TYPE in part.c
1713 Use correct field in block_dev_desc_t when writing interface type in
1714 dev_print. Error introduced in 574b3195.
1716 Also added fix from Martin Krause
1720 commit b64b8a0bd310935b70af69ac970952f2b364ae56
1722 Date: Tue May 27 10:25:39 2008 +0200
1724 Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
1728 commit 35ef877f0a8f6232cdef748f442fed5accb2b641
1730 Date: Thu May 22 18:56:52 2008 -0500
1732 Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
1734 Removed unneeded command line history initialization. Also, the original
1735 code would access the 'initted' variable before relocation to SDRAM
1736 which resulted in erratic behavior since the bss is not initialized when
1737 executing from flash.
1741 commit 22f371b63038a4ecab04068877c1089e51a01ba1
1743 Date: Wed May 21 13:28:30 2008 -0700
1745 PPC4xx: Simplified post_word_{load, store}
1747 This patch simplifies post_word_{load,store} by using the preprocessor
1748 to eliminate redundant, copy-and-pasted code.
1752 commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
1754 Date: Wed May 7 21:25:33 2008 +0400
1756 cfi_flash: enable M18 flash chips family support.
1758 Added new command set ID. Buffered write command processing is changed
1759 in order to support M18 flash chips family.
1764 commit 93c56f212ccdadc182018f0769cb284426b88f1d
1766 Date: Wed May 7 21:24:44 2008 +0400
1768 cfi_flash: support of long cmd in U-boot.
1770 Some NOR flash chips needs support of commands with length grether than max
1771 value size of uchar. For example all M18 family chips use 0x1ff command in
1772 buffered write mode as value of program loops count.
1777 commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
1779 Date: Fri May 16 11:06:06 2008 +0200
1781 DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
1783 On AD7414 the first value upon bootup is not read correctly.
1784 This is most likely because of the 800ms update time of the
1785 temp register in normal update mode. To get current values
1786 each time we issue the "dtt" command including upon powerup
1787 we switch into one-short mode.
1789 This patch fixes the problem on AD7414 equipped boards (Sequoia,
1790 Canyonlands etc), that temp value printed in the bootup log was
1795 commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
1797 Date: Fri May 30 16:55:06 2008 +0200
1799 ppc4xx: Cleanup CPCI405 variant's config file
1801 This patch removes some dead code from CPCI405 board's
1802 config files. JFFS2 support is also removed. It's not used and
1803 CPCI4052 does not build anymore without some size reduction.
1807 commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
1809 Date: Thu May 29 16:32:33 2008 +0200
1811 Remove shell variable UNDEF_SYM.
1813 UNDEF_SYM is a shell variable in the main Makefile used to force the
1814 linker to add all u-boot commands to the final image. It has no use here.
1818 commit 8c66497e06bf803489c589df58ee591d71033274
1820 Date: Fri May 16 11:10:35 2008 +0200
1822 Add support for environment in SPI flash
1824 This is pretty incomplete...it doesn't handle reading the environment
1825 before relocation, it doesn't support redundant environment, and it
1826 doesn't support embedded environment. But apart from that, it does
1831 commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
1833 Date: Fri May 16 11:10:34 2008 +0200
1835 SPI Flash: Add "sf" command
1837 This adds a new command, "sf" which can be used to manipulate SPI
1838 flash. Currently, initialization, reading, writing and erasing is
1843 commit d25ce7d24cc0f93881559f4009175ea305af65e8
1845 Date: Fri May 16 11:10:33 2008 +0200
1849 This adds a new SPI flash subsystem.
1851 Currently, only AT45 DataFlash in non-power-of-two mode is supported,
1852 but some preliminary support for other flash types is in place as
1857 commit 60445cb5c3eb77ed1a07f2d908eef09174483698
1859 Date: Fri May 16 11:10:32 2008 +0200
1861 atmel_spi: Driver for the Atmel SPI controller
1863 This adds a driver for the SPI controller found on most AT91 and AVR32
1864 chips, implementing the new SPI API.
1868 - Handle zero-length transfers appropriately. The user may send a
1869 zero-length SPI transfer with SPI_XFER_END set in order to
1870 deactivate the chip select after a series of transfers with chip
1871 select active. This is useful e.g. when polling the status
1872 register of DataFlash.
1876 commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
1878 Date: Fri May 16 11:10:31 2008 +0200
1880 SPI API improvements
1882 This patch gets rid of the spi_chipsel table and adds a handful of new
1883 functions that makes the SPI layer cleaner and more flexible.
1885 Instead of the spi_chipsel table, each board that wants to use SPI
1886 gets to implement three hooks:
1887 * spi_cs_activate(): Activates the chipselect for a given slave
1888 * spi_cs_deactivate(): Deactivates the chipselect for a given slave
1889 * spi_cs_is_valid(): Determines if the given bus/chipselect
1890 combination can be activated.
1892 Not all drivers may need those extra functions however. If that's the
1893 case, the board code may just leave them out (assuming they know what
1894 the driver needs) or rely on the linker to strip them out (assuming
1895 --gc-sections is being used.)
1897 To set up communication parameters for a given slave, the driver needs
1898 to call spi_setup_slave(). This returns a pointer to an opaque
1899 spi_slave struct which must be passed as a parameter to subsequent SPI
1900 calls. This struct can be freed by calling spi_free_slave(), but most
1901 driver probably don't want to do this.
1903 Before starting one or more SPI transfers, the driver must call
1904 spi_claim_bus() to gain exclusive access to the SPI bus and initialize
1905 the hardware. When all transfers are done, the driver must call
1906 spi_release_bus() to make the bus available to others, and possibly
1907 shut down the SPI controller hardware.
1909 spi_xfer() behaves mostly the same as before, but it now takes a
1910 spi_slave parameter instead of a spi_chipsel function pointer. It also
1911 got a new parameter, flags, which is used to specify chip select
1912 behaviour. This may be extended with other flags in the future.
1914 This patch has been build-tested on all powerpc and arm boards
1915 involved. I have not tested NIOS since I don't have a toolchain for it
1916 installed, so I expect some breakage there even though I've tried
1917 fixing up everything I could find by visual inspection.
1919 I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
1920 DataFlash drivers posted as a follow-up. I'd like some help testing
1921 other boards that use the existing SPI API.
1923 But most of all, I'd like some comments on the new API. Is this stuff
1924 usable for everyone? If not, why?
1927 - Build fixes for various boards, drivers and commands
1928 - Provide common struct spi_slave definition that can be extended by
1930 - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
1931 - Make default bus and mode build-time configurable
1932 - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
1935 - Add opaque struct spi_slave for controller-specific data associated
1937 - Add spi_claim_bus() and spi_release_bus()
1938 - Add spi_free_slave()
1939 - spi_setup() is now called spi_setup_slave() and returns a
1941 - soft_spi now supports four SPI modes (CPOL|CPHA)
1942 - Add bus parameter to spi_setup_slave()
1943 - Convert the new i.MX32 SPI driver
1944 - Convert the new MC13783 RTC driver
1947 - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
1953 commit 289011207d999b2e4085150d2aa30d547ad9b800
1955 Date: Fri May 16 11:10:30 2008 +0200
1957 Move definition of container_of() to common.h
1959 AVR32 and AT91SAM9 both have their own identical definitions of
1960 container_of() taken from the Linux kernel. Move it to common.h so
1961 that all architectures can use it.
1963 container_of() is already used by some drivers, and will be used
1964 extensively by the new and improved SPI API.
1968 commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
1970 Date: Fri May 16 11:08:11 2008 +0200
1972 soft_i2c: Pull SDA high before reading
1974 Spotted by Dean Capindale.
1976 Systems that support open-drain GPIO properly are allowed provide an
1977 empty I2C_TRISTATE define. However, this means that we need to be
1978 careful not to drive SDA low when the slave is expected to respond.
1980 This patch adds a missing I2C_SDA(1) to read_byte() required to
1981 tristate the SDA line on systems that support open-drain GPIO.
1985 commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
1987 Date: Mon May 19 11:34:53 2008 +0200
1989 ppc4xx: Remove implementations of testdram()
1991 This patch removes the used testdram() implementations of the board
1992 that are maintained by myself.
1996 commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
1998 Date: Mon Jun 2 17:37:28 2008 +0200
2000 ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
2002 Historically the 405 U-Boot port had a dram_init() call in early init
2003 stage. This function was still called from start.S and most of the time
2004 coded in assembler. This is not needed anymore (since a long time) and
2005 boards should implement the common initdram() function in C instead.
2007 This patch now removed the dram_init() call from start.S and removes the
2008 empty implementations that are scattered through most of the 405 board
2009 ports. Some older board ports really implement this dram_init() though.
2019 I changed those boards to call this assembler dram_init() function now
2020 from their board specific initdram() instead. This *should* work, but please
2021 test again on those platforms. And it is perhaps a good idea that those
2022 boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
2023 some time. So further patches welcome here.
2027 commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
2029 Date: Mon Jun 2 17:22:11 2008 +0200
2031 ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
2035 commit 39b32be18cd33b53a84065edcd4e465165cc5564
2037 Date: Mon Jun 2 17:20:03 2008 +0200
2039 ppc4xx: Fix common ECC generation code for 440GP style platforms
2041 This patch makes the common 4xx ECC code really usable on 440GP style
2044 Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
2045 compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
2046 we need to make some processor dependant defines used later on by the
2051 commit ec724f883ee3f3925e6c55027e8ffa70ada83303
2053 Date: Mon Jun 2 17:13:55 2008 +0200
2055 ppc4xx: Change Kilauea to use the common DDR2 init function
2057 This patch changes the kilauea and kilauea_nand (for NAND booting)
2058 board port to not use a board specific DDR2 init routine anymore. Now
2059 the common code from cpu/ppc4xx is used.
2061 Thanks to Grant Erickson for all his basic work on this 405EX early
2066 commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
2068 Date: Mon Jun 2 14:59:21 2008 +0200
2070 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
2072 This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
2073 ppc4xx related SDRAM/DDR/DDR2 controller defines.
2077 commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
2079 Date: Mon Jun 2 14:57:41 2008 +0200
2081 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
2083 This patch removes all SDRAM related defines from the PPC4xx headers
2084 ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
2085 the same SDRAM controller as 440 systems do (like 405EX and 440SP).
2087 It also introduces new defines for the equipped SDRAM controller based on
2088 which PPC variant is used. There new defines are:
2090 used on 405GR/CR/EP and some Xilinx Virtex boards.
2092 used on 440GP/GX/EP/GR.
2096 used on 405EX/r/440SP/SPe/460EX/GT.
2100 commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
2102 Date: Mon Jun 2 14:35:44 2008 +0200
2104 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
2106 This patch consolidates the 405 and 440 parts of the NAND booting code
2107 selected via CONFIG_NAND_SPL. Now common code is used to initialize the
2108 SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
2109 Only *after* running from this location, nand_boot() is called.
2111 Please note that the initsdram() call is now moved from nand_boot.c
2112 to start.S. I experienced problems with some boards like Kilauea
2113 (405EX), which don't have internal SRAM (OCM) and relocation needs to
2114 be done to SDRAM before the NAND controller can get accessed. When
2115 initdram() is called later on in nand_boot(), this can lead to problems
2116 with variables in the bss sections like nand_ecc_pos[].
2121 commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
2123 Date: Thu May 22 14:44:24 2008 -0700
2125 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
2127 This patch (Part 2 of 2):
2129 * Rolls up a suite of changes to enable correct primordial stack and
2130 global data handling when the data cache is used for such a purpose
2131 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
2133 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
2134 eliminating redundant ECC initialization implementations and moving
2135 redundant SDRAM initialization out of board code into shared 4xx
2138 * Enables MCSR visibility on the 405EX(r).
2140 * Enables the use of the data cache for initial RAM on
2141 both AMCC's Kilauea and Makalu and removes a redundant
2142 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
2144 - Removed, per Stefan Roese's request, defunct memory.c file for
2145 Makalu and rolled sdram_init from it into makalu.c.
2147 With respect to the 4xx DDR initialization and ECC unification, there
2148 is certainly more work that can and should be done (file renaming,
2149 etc.). However, that can be handled at a later date on a second or
2150 third pass. As it stands, this patch moves things forward in an
2151 incremental yet positive way for those platforms that utilize this
2152 code and the features associated with it.
2157 commit c821b5f120bedf73867513466412587c6912a8f8
2159 Date: Thu May 22 14:44:14 2008 -0700
2161 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
2163 This patch (Part 1 of 2):
2165 * Rolls up a suite of changes to enable correct primordial stack and
2166 global data handling when the data cache is used for such a purpose
2167 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
2169 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
2170 eliminating redundant ECC initialization implementations and moving
2171 redundant SDRAM initialization out of board code into shared 4xx
2174 * Enables MCSR visibility on the 405EX(r).
2176 * Enables the use of the data cache for initial RAM on
2177 both AMCC's Kilauea and Makalu and removes a redundant
2178 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
2180 - Removed, per Stefan Roese's request, defunct memory.c file for
2181 Makalu and rolled sdram_init from it into makalu.c.
2183 With respect to the 4xx DDR initialization and ECC unification, there
2184 is certainly more work that can and should be done (file renaming,
2185 etc.). However, that can be handled at a later date on a second or
2186 third pass. As it stands, this patch moves things forward in an
2187 incremental yet positive way for those platforms that utilize this
2188 code and the features associated with it.
2193 commit a439680019e06171d4a5694b7992accce87f590e
2195 Date: Wed May 21 13:28:30 2008 -0700
2197 PPC4xx: Simplified post_word_{load, store}
2199 This patch simplifies post_word_{load,store} by using the preprocessor
2200 to eliminate redundant, copy-and-pasted code.
2204 commit f979690ee337450b2030aba128f95b7a8d9881c0
2206 Date: Thu May 15 15:13:08 2008 -0500
2208 Fix warnings from gcc-4.3.0 build on a ppc host
2210 * The cfi_flash.c memset fix actual allows the board to boot so there is
2211 a bit more going on here than just resolving warnings associated with
2212 uninitialized variables.
2214 * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
2215 inline function 'ext2_find_next_zero_bit' which is not static
2219 commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
2221 Date: Wed May 14 13:09:51 2008 -0500
2223 MPC512x: Change traps.c to not reference non-addressable memory
2225 Currently, END_OF_RAM is used by the trap code to determine if
2226 we should attempt to access the stack pointer or not. However,
2227 on systems with a lot of RAM, only a subset of the RAM is
2228 guaranteed to be mapped in and accessible. Change END_OF_RAM
2229 to use get_effective_memsize() instead of using the raw ram
2234 commit 81673e9ae14b771cd13faf19947192599cae3959
2236 Date: Tue May 13 19:01:54 2008 -0500
2238 Make sure common.h is the first include.
2240 If common.h isn't first we can get CONFIG_ options defined in the
2241 board config file ignored. This can cause an issue if any of those
2242 config options impact the size of types of data structures
2243 (eg CONFIG_PHYS_64BIT).
2247 commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
2249 Date: Tue May 13 15:53:29 2008 +0200
2251 Avoid initrd and logbuffer area overlaps
2253 Add logbuffer to reserved LMB areas to prevent initrd allocation
2254 from overlaping with it.
2256 Make sure to use correct logbuffer base address.
2260 commit 6956d53d9934862507f83f0e3255dfd4662e7482
2262 Date: Tue May 13 13:29:54 2008 +0200
2264 lwmon5: add memory-pattern-test to FPGA POST.
2266 commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
2268 Date: Thu May 8 19:02:51 2008 -0500
2270 PPC: 86xx Add bat registers to reginfo command
2274 commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
2276 Date: Fri May 9 15:41:35 2008 -0500
2278 PPC: Add print_bats() to lib_ppc/bat_rw.c
2280 This function prints the values of all the BAT register
2281 pairs - I needed this for debug earlier this week; adding it to
2282 lib_ppc so others can use it (and add it to reginfo commands
2287 commit c148f24c15743a02e855636e6bed013bd121f7f2
2289 Date: Thu May 15 21:29:04 2008 -0500
2291 PPC: Change lib_ppc/bat_rw.c to use high bats
2293 Currently, this code only deals with BATs 0-3, which makes
2294 it useless on systems that support BATs 4-7. Add the
2295 support for these registers.
2299 commit 31d826722434931e1152a09d140187dcf72f8aac
2301 Date: Thu May 8 19:02:12 2008 -0500
2303 PPC: Create and use CONFIG_HIGH_BATS
2305 Change all code that conditionally operates on high bat
2306 registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
2307 instead of the myriad ways this is done now. Define the option
2308 for every config for which high bats are supported (and
2309 enabled by early boot, on parts where they're not always
2314 commit aa3b8bf9c30065bb2ea852799d32db5020598495
2316 Date: Wed May 28 19:55:19 2008 +0200
2318 E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
2323 commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
2325 Date: Wed May 28 13:06:25 2008 -0500
2327 ColdFire: Add 10 base ethernet support for mcf5445x
2332 commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
2334 Date: Fri May 30 00:53:38 2008 +0900
2336 mips: Add an 'include/asm/errno.h', like all other architectures
2338 All other u-boot architectures have an include/asm/errno.h, so
2339 this change adds it to the mips include/asm-mips headers also.
2341 Stolen from Linux 2.6.25.
2345 commit e2ad8426624bac457acc6925b6ff408e9bf20466
2347 Date: Fri May 30 00:53:38 2008 +0900
2349 [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
2353 commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
2355 Date: Fri May 30 00:53:38 2008 +0900
2357 [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
2361 commit bf462ae450a7f2eeeddc699ed345b391e3263540
2363 Date: Fri May 30 00:53:37 2008 +0900
2365 [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
2367 No functional changes.
2371 commit 89a1550ec6b74452274a7a23127936e2c7eec711
2373 Date: Fri May 30 00:53:37 2008 +0900
2375 mips: If CONFIG_CMD_SPI is defined, call spi_init()
2377 The mips architecture currently does not call 'spi_init()' in the generic
2378 board initialization routine is CONFIG_CMD_SPI is defined.
2380 This patch rectifies that problem.
2385 commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
2387 Date: Fri May 30 00:53:37 2008 +0900
2389 [MIPS] lib_mips/board.c: Add nand_init
2391 This patch adds the standard 'nand_init()' call to the mips generic
2392 'board_init_r()' call, bringing MIPS in line with the other architectures.
2397 commit d6ac2ed893c2168738aee01579d6283af8d37045
2399 Date: Thu May 22 10:49:46 2008 -0500
2401 Remove prototypes of nand_init() in favor of including nand.h.
2403 Likewise with onenand_init().
2407 commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
2409 Date: Thu May 22 10:49:00 2008 -0500
2411 Make onenand_uboot.h self-sufficient.
2413 Don't assume types are provided by previously included headers.
2417 commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
2419 Date: Wed Jan 16 14:26:59 2008 +0100
2421 nand: Correct NAND erase percentage output
2423 For NAND erase sizes smaller than one NAND erase block, erase
2424 percentage output becomes grater than 100% e.g.
2428 Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
2429 > nand erase 0x100000 0x2000
2430 NAND erase: device 0 offset 0x100000, size 0x2000
2431 Erasing at 0x100000 -- 200% complete.
2436 Correct this and give user a warning that more is erased than specified:
2439 > nand erase 0x100000 0x2000
2440 NAND erase: device 0 offset 0x100000, size 0x2000
2441 Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
2442 Erasing 0x00004000 instead
2443 Erasing at 0x100000 -- 100% complete.
2450 commit 5922db6c0948506be91e0de44e7a6863a18a417f
2452 Date: Tue May 13 17:31:24 2008 +0200
2454 Cleanup nand_info[] declaration.
2456 The nand_info array is declared as extern in several .c files.
2457 Those days, nand.h contains a reference to the array, so there is
2458 no need to declare it elsewhere.
2463 commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
2465 Date: Mon May 19 09:30:43 2008 -0500
2467 NAND: Provide a sane default for NAND_MAX_CHIPS.
2469 This allows the header to be included regardless of whether a board's
2470 config file provides NAND-related defininitions.
2474 commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
2476 Date: Mon May 26 12:19:10 2008 +0200
2478 avr32: Fix theoretical race in udelay()
2480 If the specified delay is very short, the cycle counter may go past the
2481 "end" time we are waiting for before we get around to reading it.
2483 Fix it by checking the different between the cycle count "now" and the
2484 cycle count at the beginning. This will work as long as the delay
2485 measured in number of cycles is below 2^31.
2489 commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
2491 Date: Wed May 21 13:01:09 2008 +0200
2493 avr32: Compile atmel_mci.o conditionally
2495 Remove #ifdef CONFIG_MMC from the source file and use conditional
2496 compilation in the Makefile instead.
2500 commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
2502 Date: Thu May 22 12:28:25 2008 +0200
2504 avr32: Fix wrong error flags in atmel_mci driver
2506 Make sure we check for CRC errors when sending commands that use CRC
2512 commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
2514 Date: Wed May 21 11:10:59 2008 +0200
2516 avr32: Fix two warnings in atmel_mci.c
2518 The warnings are harmless but annoying. Let's fix them.
2522 commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
2524 Date: Mon May 19 11:36:28 2008 +0200
2526 avr32: Rework SDRAM initialization code
2528 This cleans up the SDRAM initialization and related code a bit, and
2529 allows faster booting.
2531 * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
2532 * Remove memory test from sdram_init() and make caller responsible
2533 for verifying the SDRAM and determining its size.
2534 * Remove base_address member from struct sdram_config (was sdram_info)
2535 * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
2536 * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
2540 commit 95107b7c028806919630bf02c653aa8f4f867c94
2542 Date: Mon May 19 11:27:37 2008 +0200
2544 avr32: Do stricter stack checking in the exception handler
2546 Don't do a stack dump if the stack pointer is outside the memory area
2551 commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
2553 Date: Fri May 2 15:32:57 2008 +0200
2555 avr32: Use the same entry point for reset and exception handling
2557 Since the reset vector is always aligned to a very large boundary, we
2558 can save a couple of KB worth of alignment padding by placing the
2559 exception vectors at the same address.
2561 Deciding which one it is is easy: If we're handling an exception, the
2562 CPU is in Exception mode. If we're starting up after reset, the CPU is
2563 in Supervisor mode. So this adds a very minimal overhead to the reset
2564 path (only executed once) and the exception handling path (normally
2565 never executed at all.)
2569 commit 0c16eed2189a190bd5655b33c029f809a9b31128
2571 Date: Fri May 2 15:24:22 2008 +0200
2573 avr32: Put memset in its own section
2575 All C code is compiled with -ffunction-sections -fdata-sections.
2576 Assembly functions should get their own sections as well so that
2577 everything looks consistent.
2581 commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
2583 Date: Fri May 2 15:21:40 2008 +0200
2585 avr32: Rename pm_init() as clk_init() and make SoC-specific
2587 pm_init() was always more about clock initialization than anything
2588 else. Dealing with PLLs, clock gating and such is also inherently
2589 SoC-specific, so move it into a SoC-specific directory.
2593 commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
2595 Date: Wed Apr 30 16:15:57 2008 +0200
2597 avr32: Use new-style Makefile for the at32ap platform
2599 This makes it easier to avoid compiling certain files later.
2603 commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
2605 Date: Wed Apr 30 14:36:47 2008 +0200
2607 avr32: Remove unused file cpu/at32ap/pm.c
2611 commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
2613 Date: Wed Apr 30 14:19:28 2008 +0200
2615 avr32: Clean up the HMATRIX code
2617 Rework the HMATRIX configuration interface so that it becomes easier
2618 to configure the HMATRIX for boards with special needs, and add new
2621 The HMATRIX header file has been split into a general,
2622 chip-independent part with register definitions, etc. and a
2623 chip-specific part with SFR bitfield definitions and master/slave
2628 commit 0a2e48792dd372c90b80059f3235e67a567e16fc
2630 Date: Thu Nov 22 12:14:11 2007 +0100
2632 avr32: Add support for the ATSTK1006 board
2634 This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
2635 board. It's currently in production and will be available soon.
2639 commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
2641 Date: Tue Apr 29 12:53:05 2008 +0200
2643 avr32: Get rid of the .flashprog section
2645 The .flashprog section was only needed back when we were running
2646 directly from flash, and it's even more useless on NGW100 since it
2647 uses the CFI flash driver which never used this workaround in the
2650 Remove it on STK1000 as well, and get rid of all the associated code and
2655 commit cdd42c0c7a5205fc380912d83229069a71ea3abf
2657 Date: Wed Apr 30 13:09:56 2008 +0200
2659 avr32: Use correct condition around macb clock accessors
2661 get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
2662 the chip has a MACB controller, not when it has a USART.
2666 commit f793a3581901ff39c2abb94012d9bbc8573ccf02
2668 Date: Wed Apr 16 22:57:58 2008 -0700
2670 avr32: Disable the AP7000 internal watchdog on startup
2672 This patch forces the watchdog off in all cases. That will at least
2673 get rid of the constant reboot cycle, though it won't let the watchdog
2674 actually run in the new kernels: its probe() comes up with a polite
2679 commit 55ac7a7490b55da56659f95d82a0c83b9756df27
2681 Date: Fri Feb 22 12:54:39 2008 -0800
2683 avr32: stk1002 and ngw100 convergence
2685 Make STK1002 and NGW100 boards act more alike:
2686 - STK boards can use as many arguments as NGW
2687 - STK boards don't need to manage FPGAs either
2688 - NGW commands should match STK ones
2690 Also spell U-Boot right in prompts for STK1002 and NGW100.
2696 commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
2698 Date: Tue May 27 13:47:00 2008 +0200
2700 Socrates: Fix PCI bus frequency report
2704 commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
2706 Date: Tue May 27 11:49:13 2008 +0200
2708 Socrates: Added USB support.
2712 commit 5a904e5637cff1d708dc67098004f83ba9e84c54
2714 Date: Tue May 27 11:35:02 2008 +0200
2716 USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
2718 In case of several PCI USB controllers on a board this variable
2719 specifys which controller to use.
2720 See doc/README.generic_usb_ohci for details.
2724 commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
2726 Date: Tue May 27 10:36:07 2008 +0200
2728 Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
2732 commit 83e9d7a2614d4006b92690afa3390c291734267e
2734 Date: Mon May 26 18:16:04 2008 +0200
2736 Socrates: Config file cleanup.
2740 commit 602cac1389b755b223272f2328a47e6f8c240848
2742 Date: Sat May 24 12:47:46 2008 +0200
2744 MAKEALL: add at91 list
2748 commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
2750 Date: Fri May 23 15:37:05 2008 -0700
2752 Add Marvell 88E1118 support for TSEC
2757 commit 557b377d8bfc8b833b6e749457bcdfa298331a24
2759 Date: Mon May 5 14:06:11 2008 +0200
2761 smc911x: add 16 bit support
2766 commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
2768 Date: Wed May 21 22:12:00 2008 +0200
2770 USB: replace old swap_ with proper endianess conversion macros
2775 commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
2777 Date: Wed May 21 21:29:10 2008 +0200
2779 Fix endianess conversion in usb_ohci.c
2784 commit 477434c63c2ea5baa5c6c4e43500786f436511ff
2786 Date: Thu May 22 01:15:53 2008 +0200
2788 USB: add support for multiple PCI OHCI controllers
2790 Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
2791 In case of several PCI USB controllers on a board this variable
2792 specifys which controller to use.
2794 Also add USB support for sokrates board.
2796 See doc/README.generic_usb_ohci for details.
2801 commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
2803 Date: Wed May 21 16:56:08 2008 +0200
2805 Fix some whitespace issues
2807 introduced by 53677ef18 "Big white-space cleanup."
2811 commit 4416603aeb06861b468b06a981e52c3ff805db7b
2813 Date: Mon May 12 14:36:39 2008 -0500
2815 Make ads5121 out-of-tree compiling safe
2817 Reuse the existing DIU driver in board/freescale/common.
2821 commit 0e1bad47cd345c76c91a64caf41011e431b62599
2823 Date: Mon May 5 10:20:01 2008 -0500
2825 Adding DIU support for Freescale 5121ADS
2827 Add DIU and cfb console support to FSL 5121ADS board.
2829 Use #define CONFIG_VIDEO in config file to enable fb console.
2833 commit a48ff68d235e671176f6b496c44246dbe5e0a93f
2835 Date: Mon May 5 10:20:00 2008 -0500
2837 Replace DPRINTF with debug
2839 Remove DPRINTF macro and replace it with generic debug macro.
2843 commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
2845 Date: Mon May 5 10:19:59 2008 -0500
2847 Move pixel clock setting to board file
2849 The clock divider has different format in 5121 and 8610. This patch moves it to
2850 board specific code.
2854 commit 53677ef18e25c97ac613349087c5cb33ae5a2741
2856 Date: Tue May 20 16:00:29 2008 +0200
2858 Big white-space cleanup.
2860 This commit gets rid of a huge amount of silly white-space issues.
2861 Especially, all sequences of SPACEs followed by TAB characters get
2862 removed (unless they appear in print statements).
2864 Also remove all embedded "vim:" and "vi:" statements which hide
2865 indentation problems.
2869 commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
2871 Date: Thu May 8 17:46:23 2008 +0200
2873 socrates: fix second TSEC configuration (it is actually TSEC3)
2877 commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
2879 Date: Thu May 8 14:17:08 2008 +0200
2881 Fixed reset for socrates
2885 commit e18575d5f589a62e19c70d471d4b4e27cad3af56
2887 Date: Wed May 7 15:10:49 2008 +0200
2889 socrates: changes to support FDT
2894 commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
2896 Date: Wed Apr 30 11:42:50 2008 +0200
2898 Initial support for "Socrates" board
2902 commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
2904 Date: Thu May 8 15:46:42 2008 +0200
2906 POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
2908 This way we become able to utilize the full post_log_word for POST
2909 activities (overwise, POST ECC, which has 0x8000 ID, could be
2910 erroneously treated as started in post_output_backlog() even if there
2911 was actually no POST ECC run (because of OCM POST failure, for
2916 commit 7845d49094c81321021b50a4dbb8864d2f3777e4
2918 Date: Thu May 8 15:46:02 2008 +0200
2920 POST: mark OCM test as POST_STOP
2924 commit 28a385065882d6cb6ac5f443311ff87887ed7c13
2926 Date: Thu May 8 15:45:26 2008 +0200
2928 POST: add POST_STOP flag
2930 Don't run futher tests in case of a test fails that is marked as
2936 commit a525145d8110d15b4389d23c3ea8a78f22509d3f
2938 Date: Thu May 8 15:44:16 2008 +0200
2940 POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
2942 Switch the OCM testid with the codec one. The reason is that current
2943 implementation requires the POST_ROM testid to fit into lower 16
2944 bits, and the codec test will never run with POST_ROM hopefully.
2948 commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
2950 Date: Thu May 8 15:43:28 2008 +0200
2952 lwmon5: enable OCM post test on lwmon5 board
2956 commit 6e8ec682268493b8d098f99e17b1ce71b4448977
2958 Date: Thu May 8 15:42:47 2008 +0200
2960 POST: OCM test added.
2962 Added OCM test to POST layer. This version runs before all other tests
2963 but doesn't yet interrupt post sequence on failure.
2968 commit 6891260bdd935a382c95d9fa333922b0dfded68a
2970 Date: Thu May 8 15:40:39 2008 +0200
2976 commit 727f63334676e760877d43bfb8f0e9331ac8b101
2978 Date: Tue May 20 02:16:36 2008 -0700
2980 common/usb.c: fix incorrect escape sequence
2984 commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
2986 Date: Thu May 15 15:26:27 2008 -0500
2988 Fix 8313ERDB board configuration
2990 Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
2991 Correct TSEC1 vs TSEC2 assignment.
2992 Define ETHADDR and ETH1ADDR always.
2997 commit 2c289e320dcfb3760e99cf1d765cb067194a1202
2999 Date: Mon May 19 09:47:25 2008 -0500
3001 mpc86xx: Removed unused and unconfigured memory test code.
3003 Besides, other common code exists.
3007 commit 180a90abdae72587c0f679edf8991455e559440d
3009 Date: Mon May 19 12:47:11 2008 +0200
3013 Update CHANGELOG for release.
3017 commit 16bedc661de0dae767b1377d8413373a3fbcfa79
3019 Date: Mon May 19 07:14:38 2008 +0200
3021 ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
3023 When SATA is selected (via jumper J6) we need to disable the first PCIe
3024 node in the device tree, so that Linux doesn't initialize it. Otherwise
3025 the Linux SATA driver will fail to detect the devices.
3027 The same goes the other way around too. So if PCIe is selected we need
3028 to disable the SATA node in the device tree.
3030 This is because PCIe port 0 and SATA on 460EX share the same pins
3031 (multiplexed) and we have to configure in U-Boot which peripheral is
3036 commit 3cc27b426aeefe2930f911692e9df3143fb2565f
3038 Date: Sun May 18 19:09:58 2008 +0200
3040 i386: Fix multiple definitions of __show_boot_progress
3044 commit 311f3446930c1e64c12026c1cfd00500b05be52d
3046 Date: Sun May 18 19:09:57 2008 +0200
3048 sc530_spunk: add missing SOBJS entry
3052 commit a559317143b4f95927b08cd388707e6f077e95fa
3054 Date: Sun May 18 19:09:56 2008 +0200
3056 sc520_spunk: Fix flash
3058 flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
3059 flash.c:398: error: label at end of compound statement
3063 commit 91f221317af64191ee8caf303ea9305943158691
3065 Date: Sun May 18 19:09:49 2008 +0200
3067 drivers/pcmcia: add missing i82365
3071 commit dd223944132f97ffa52977ea95e5a52428f5cc2f
3073 Date: Sun May 18 19:09:47 2008 +0200
3075 i386/bootm: remove unused var
3079 commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
3081 Date: Sun May 18 19:09:45 2008 +0200
3083 example/gitignore: update with all generated examples
3087 commit a38dc3ea8614f8b0c41e432b445a9959b9711295
3089 Date: Thu May 15 00:42:45 2008 +0200
3091 TQM8272: fix out-of-tree building
3093 ...and add to MAKEALL script
3097 commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
3099 Date: Wed May 14 23:34:53 2008 +0200
3101 environment: fix bug introduced by commit a8409f4f1ac8
3103 env_get_char is not a function, but a pointer to one.
3107 commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
3109 Date: Wed May 14 13:39:22 2008 +0200
3111 ppc4xx: QUAD100HD: Allow the environment to be put into flash.
3113 After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also
3114 use a redundant environment.
3118 commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
3120 Date: Wed May 14 13:55:30 2008 +0200
3122 Fix config files for out-of-tree building
3124 Several board/<...>/config.mk files include dynamically built (by
3125 the Makefile) config files but used the wrong file name of
3126 $(TOPDIR)/board/$(BOARDDIR)/config.tmp
3127 instead if the correct
3128 $(OBJTREE)/board/$(BOARDDIR)/config.tmp
3130 The bug is nasty because the build result is correct for the (normal)
3131 in-tree builds, and because 'sinclude' is used no errors get raised
3132 even for out-of-tree build tests. But out-of-tree builds use an
3133 incomplete and thus usually incorrect configuration...
3137 commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
3139 Date: Wed May 14 13:40:03 2008 +0200
3141 ppc4xx: Fix bogus Canyonlands config.mk
3143 This patch fixes the canyonlands config.mk file to enable correct
3144 out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
3148 commit fdd1247a66d788a3446244f6fde9955a93c26322
3150 Date: Wed May 14 10:32:32 2008 +0200
3152 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
3154 Canyonlands has a file ddr2_fixed.c which needs special treatment when
3155 building in separate directory. It has to be linked to build directory
3156 otherwise it is not seen.
3160 commit a8409f4f1ac84c36273c1a1e341189662521bcfb
3162 Date: Wed May 14 12:22:49 2008 +0200
3164 environment: cleanup prototype declarations of env functions.
3168 commit cf39b07948015c480b72a6e732cf7d839aa93a9e
3170 Date: Wed May 14 12:21:48 2008 +0200
3172 linkstation_HGLAN: Fix out of tree building.
3176 commit 085551c05ca09e6c491ea11a1c6727a36776a545
3178 Date: Wed May 14 10:32:32 2008 +0200
3180 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
3182 Canyonlands has a file ddr2_fixed.c which needs special treatment when
3183 building in separate directory. It has to be linked to build directory
3184 otherwise it is not seen.
3188 commit 1510b82d50615f344e89d42533e8224cce067dc0
3190 Date: Tue May 13 23:15:52 2008 +0200
3192 Makefile: fix "error: version_autogenerated.h: No such file or directory"
3196 commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
3198 Date: Tue May 13 17:31:24 2008 +0200
3200 Cleanup nand_info[] declaration.
3202 The nand_info array is declared as extern in several .c files.
3203 Those days, nand.h contains a reference to the array, so there is
3204 no need to declare it elsewhere.
3209 commit 70fab1908fc1734a403711eaabbef546bc4b77dc
3211 Date: Tue May 13 20:22:01 2008 +0200
3213 ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
3217 commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
3219 Date: Mon May 12 01:11:21 2008 +0200
3221 Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
3223 This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
3224 which broke many PowerPC boards.
3226 commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
3228 Date: Mon May 12 00:56:28 2008 +0200
3230 Revert "Avoid initrd and logbuffer area overlaps"
3232 This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
3233 which breaks building on all PPC boards that don't use a log buffer.
3235 commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
3237 Date: Sat May 10 14:02:04 2008 -0700
3239 Fix offset calculation for multi-type legacy images.
3241 Calculation of tail was incorrect when size % 4 == 0.
3243 New code removes the conditional and does the same thing but with arithmetic
3247 commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
3249 Date: Mon May 12 00:40:58 2008 +0200
3251 Revert "Change env_get_char from a global function ptr to a function."
3253 This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
3254 which is known to break booting from dataflash and NAND.
3256 commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
3258 Date: Sun May 11 23:13:57 2008 +0200
3260 API: remove duplicate syscall check
3264 commit 67e3beb52c320b0a31cf030716c99392cde2d532
3266 Date: Fri May 9 21:46:51 2008 +0200
3268 AT91: Cleanup unused config header file definitions.
3270 CONFIG_ENV_OVERWRITE is commented out in the config header files,
3271 so let's cleanup the files by removing the whole definition.
3276 commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
3278 Date: Thu May 8 14:52:34 2008 +0200
3280 Support AT91CAP9 revC CPUs
3282 The AT91CAP9 revC CPU has a few differences over the previous,
3283 revB CPU which was distributed in small quantities only (revA was
3284 an internal Atmel product only).
3286 The revC silicon needs a special initialisation sequence to
3287 switch from the internal (imprecise) RC oscillator to the
3293 commit 098b7b4b441b12c2a64dd517930f43c793542759
3295 Date: Thu May 8 14:52:33 2008 +0200
3297 Use custom logo for Atmel boards
3299 This patch adds a custom vendor logo for the Atmel AT91 boards.
3304 commit 761c70b80cdd3bead40146b96a8e713d6ae01632
3306 Date: Thu May 8 14:52:32 2008 +0200
3308 AT91SAM9RLEK: hook up the ATMEL LCD driver
3310 This patch makes the necessary adaptations (PIO configurations and
3311 defines in config header file) to hook up the Atmel LCD driver to the
3317 commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
3319 Date: Thu May 8 14:52:31 2008 +0200
3321 AT91SAM9263EK: hook up the ATMEL LCD driver
3323 This patch makes the necessary adaptations (PIO configurations and
3324 defines in config header file) to hook up the Atmel LCD driver to the
3325 AT91SAM9263EK board.
3330 commit 820f2a958325061a446115f3035e48e4726b3390
3332 Date: Thu May 8 14:52:30 2008 +0200
3334 AT91SAM9261EK: hook up the ATMEL LCD driver
3336 This patch makes the necessary adaptations (PIO configurations and
3337 defines in config header file) to hook up the Atmel LCD driver to the
3338 AT91SAM9261EK board.
3343 commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
3345 Date: Thu May 8 14:52:29 2008 +0200
3347 AT91CAP9ADK: hook up the ATMEL LCD driver
3349 This patch makes the necessary adaptations (PIO configurations and
3350 defines in config header file) to hook up the Atmel LCD driver to the
3356 commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
3358 Date: Fri May 9 21:57:18 2008 +0200
3360 Add ATMEL LCD driver
3362 This patch adds support for the ATMEL LCDC driver which is used on some
3363 AT91 and AVR platforms.
3365 Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
3366 AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
3371 commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
3373 Date: Thu May 8 18:52:25 2008 +0200
3375 AT91SAM9RLEK support
3377 This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
3383 commit 8e429b3eee23927c1222679f6b6f53667b21595c
3385 Date: Thu May 8 18:52:23 2008 +0200
3387 AT91SAM9263EK support
3389 This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
3395 commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
3397 Date: Thu May 8 20:52:22 2008 +0200
3399 AT91SAM9261EK support
3401 This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
3407 commit 86c8c8a414988c50104a3b02c29f50af2be738c0
3409 Date: Thu May 8 20:52:21 2008 +0200
3411 AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
3413 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
3414 in order to cope with the changes in DataFlash partitionning scheme
3420 commit 96996ac25d5222611a8888968db6e53a6d3726da
3422 Date: Thu May 8 20:52:20 2008 +0200
3424 AT91SAM9260EK: Normalize BOOTARGS
3426 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
3427 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
3433 commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
3435 Date: Thu May 8 20:52:19 2008 +0200
3437 AT91SAM9260EK: Normalize SPI timings
3439 This patch changes the SPI timings to closely match the ones
3440 used by the Linux kernel and the Atmel's own bootstrap project.
3445 commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
3447 Date: Thu May 8 20:52:18 2008 +0200
3449 AT91SAM9260EK: Handle 8 or 16 bit NAND
3451 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
3452 makes the support configurable in the board config header file
3453 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
3458 commit ab52640fc01624e208424e527af0b7b3a5a65a12
3460 Date: Thu May 8 20:52:17 2008 +0200
3462 AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
3464 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
3465 in order to cope with the changes in DataFlash partitionning scheme
3471 commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
3473 Date: Thu May 8 20:52:16 2008 +0200
3475 AT91CAP9ADK: Normalize BOOTARGS
3477 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
3478 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
3484 commit 93da48b910511911ce110656e17ed733c8ac4c45
3486 Date: Thu May 8 20:52:15 2008 +0200
3488 AT91CAP9ADK: Normalize SPI timings
3490 This patch changes the SPI timings to closely match the ones
3491 used by the Linux kernel and the Atmel's own bootstrap project.
3496 commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
3498 Date: Thu May 8 20:52:14 2008 +0200
3500 AT91CAP9ADK: Handle 8 or 16 bit NAND
3502 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
3503 makes the support configurable in the board config header file
3504 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
3509 commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
3511 Date: Thu May 8 20:52:13 2008 +0200
3513 Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
3515 All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
3516 below avoids the duplication of u-boot.lds by putting the file in the
3517 cpu directory instead of the board one.
3522 commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
3524 Date: Thu May 8 20:52:12 2008 +0200
3526 Add proper copyright notices in Atmel boards Makefiles
3528 The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
3529 copyright notice. This patch adds the missing pieces.
3534 commit e817a042cef6164bf26fee86f90326f2ec9e6745
3536 Date: Thu May 8 20:52:11 2008 +0200
3538 Add copyright information in Atmel boards partition.c
3540 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
3541 the new created files. This patch fixes the problem.
3546 commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
3548 Date: Thu May 8 20:52:10 2008 +0200
3550 Update origin and copyright information in arch-at91sam9 header files
3552 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
3553 copied from the Linux kernel sources. This patch explicitly specifies
3554 this origin for all the copied headers, and for those missing copyright
3555 information, adds it.
3557 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
3558 in the latest kernel sources by 'at91sam9_smc.h'.
3560 The copyright information has been confirmed by the AT91 Linux kernel
3566 commit 79dd1712689d6a5031d7cbff54957049680751c7
3568 Date: Thu May 8 16:00:55 2008 +0200
3570 ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
3572 When using dhcp/bootp the "netmask" environment variable is not set
3573 because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
3574 desireable, so the following patch adds this this option to the board
3580 commit 869d14b4cc2e47de2ddcb117bad0407a44436684
3582 Date: Sat May 10 10:30:36 2008 +0200
3584 ppc4xx: Update Makalu defconfig to use device-tree booting as default
3586 This patch reworks the default environment on Makalu. Now "net_nfs" for
3587 example uses the device-tree style booting formerly know as "net_nfs_fdt".
3588 Also the addresses in RAM were changed because of the new image booting
3589 support, which check for image overwriting. So the addresses needed to
3594 commit f3612a7b199cab3942f60d9c1392eb39d58cc699
3596 Date: Wed May 7 13:28:16 2008 -0500
3598 PPC: fix map_physmem build warning
3600 map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
3601 enabled. This quiets the warning.
3605 commit 36f32675f40292002ee1fed252c180a43022d2d4
3607 Date: Wed May 7 13:24:57 2008 -0500
3609 Update pci code to use phys_addr_t
3611 Physical addrs need to be represented by phys_addr_t, not
3612 unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT
3613 are going to fail mightily.
3617 commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
3619 Date: Thu May 8 22:32:22 2008 -0700
3621 Support legacy multi-type images without FDT section.
3623 This patch enables legacy multi-type images containing only a Linux kernel
3624 and root file system to be loaded, maintaining compatibility with previous
3627 This is required when using old image files such as a Linux 2.4 kernel /
3633 commit 881031d9732783b7aeae2198fc7eb480ae8974a6
3635 Date: Sat May 10 00:38:02 2008 +0200
3641 commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
3643 Date: Sat May 10 00:36:09 2008 +0200
3645 post/cpu/ppc4xx/Makefile: line length cleanup
3649 commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
3651 Date: Thu May 8 22:52:09 2008 +0200
3653 Fix @ -> <at> substitution
3655 When applying the AT91CAP9 patches upstream, something transformed
3656 the '@' character into the ' <at> ' sequence.
3658 The patch below restores the original form in all the places where
3659 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
3660 were copied from AT91CAP9, and a couple of other files where the
3661 ' <at> ' sequence was present).
3665 commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
3667 Date: Thu May 8 22:52:10 2008 +0200
3669 Update origin and copyright information in arch-at91sam9 header files
3671 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
3672 copied from the Linux kernel sources. This patch explicitly specifies
3673 this origin for all the copied headers, and for those missing copyright
3674 information, adds it.
3676 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
3677 in the latest kernel sources by 'at91sam9_smc.h'.
3679 The copyright information has been confirmed by the AT91 Linux kernel
3684 commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
3686 Date: Thu May 8 22:52:11 2008 +0200
3688 Add copyright information in Atmel boards partition.c
3690 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
3691 the new created files. This patch fixes the problem.
3695 commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
3697 Date: Thu May 8 10:09:27 2008 +0200
3699 mx31ads: fix 32kHz clock handling
3701 According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
3702 oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
3703 Also fix a typo when verifying a jumper configuration. While at it, make
3704 two needlessly global functions static.
3708 commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
3710 Date: Wed May 7 13:10:04 2008 +0200
3712 Avoid initrd and logbuffer area overlaps
3714 Add logbuffer to reserved LMB areas to prevent initrd allocation
3715 from overlaping with it.
3717 Make sure to use correct logbuffer base address.
3721 commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
3723 Date: Wed May 7 13:08:54 2008 +0200
3725 ppc: Cleanup get_effective_memsize() use
3727 Removed duplicated effective memory size calculation code.
3731 commit 273c37d843d5b581090378016cd12dd9c586907b
3733 Date: Wed May 7 09:03:53 2008 +0200
3735 Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
3737 Recent modifcations to LOGBUFFER handling code were incorrecly
3738 introduced to fit_check_kernel() routine during
3739 "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
3740 commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
3742 This patch cleans up this merge issue.
3746 commit bc11756daff89a3de09ca80adac962b88cf06e6e
3748 Date: Tue May 6 20:16:15 2008 -0700
3750 Propagate Error Status to the Shell on fw_printenv Errors
3752 Changed implementation such that fw_printenv returns failure status
3753 when one or more specified variables do not exist or when incorrect
3754 command syntax is used.
3756 This aids scripting fw_printenv such that the script can key of the
3757 return status rather than relying on standard error "scraping".
3762 commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
3764 Date: Tue May 6 16:18:00 2008 -0700
3766 Fix Compilation Errors with 'tools/env/fw_printenv'
3768 In the current top-of-tree, 1.3.3.-rc2, the optional tool
3769 'tools/env/fw_printenv' fails to compile for two reasons:
3771 1) The header watchdog.h cannot be found.
3772 2) The header zlib.h is picked up from the tool chain rather than the
3773 project causing a prototype conflict for crc32.
3775 This patch addresses both of these issues.
3777 Platforms Tested On:
3782 commit 597f6c26a18b389903a64692bacbf9a1ca69355b
3784 Date: Mon May 5 10:22:53 2008 -0500
3786 Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
3788 When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
3789 work before relocating to RAM because command history is written into
3790 a global array that is not writable before relocation. This patch
3791 defers to the no-editing and no-history code in readline_into_buffer()
3792 if it is called before relocation.
3797 commit 726c0f1e5f108dccea052965123b95837d2bd402
3799 Date: Mon May 5 16:11:22 2008 +0200
3801 cosmetic: Adjust coding style for switch statements to be consistent
3805 commit 574b319512b13e10800f0045e39b993f4ca25e42
3807 Date: Mon May 5 16:11:21 2008 +0200
3809 Fix disk type output in disk/part.c
3813 commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
3815 Date: Mon May 5 14:20:03 2008 +0300
3817 Mail address change, documentation modified
3821 commit 4d49b28038e2819088e8356a77212fc95a89ce5a
3823 Date: Sun May 4 15:42:41 2008 +0200
3825 microblaze: Repare intc handling
3829 commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
3831 Date: Sun May 4 15:17:52 2008 +0200
3833 include/gitignore: update to all architectures
3837 commit 1df368aed3b8bc240fe1595d290b0e91b22961da
3839 Date: Mon May 5 02:12:06 2008 +0200
3841 ide: Remove spurious second include of io.h
3843 Removed the second include, with all the #ifdef around as suggested by Wolfgang.
3847 commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
3849 Date: Tue May 6 16:46:37 2008 -0400
3853 This patch fixes three typos.
3854 The first is a repetition of CONFIG_CMD_BSP.
3855 The second makes the #endif comment match its #if.
3856 The third is a spelling error.
3860 commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
3862 Date: Sun May 4 16:45:01 2008 -0700
3864 Recognize 'powerpc' As an Alias for IH_ARCH_PPC
3866 Add support for the recognition of 'powerpc' as an alias for the PowerPC
3867 architecture type since Linux is already trending in that direction,
3868 preferring 'powerpc' to 'ppc'.
3872 commit f5a24259190c388c2527bdc49fee34577d862cc7
3874 Date: Fri May 2 13:35:15 2008 -0700
3876 7450 and 86xx L2 cache invalidate bug corrections
3878 The 7610 and related parts have an L2IP bit in the L2CR that is
3879 monitored to signal when the L2 cache invalidate is complete whereas the
3880 7450 and related parts utilize L2I for this purpose. However, the
3881 current code does not account for this difference. Additionally the 86xx
3882 L2 cache invalidate code used an "andi" instruction where an "andis"
3883 instruction should have been used.
3885 This patch addresses both of these bugs.
3890 commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
3892 Date: Fri May 9 10:16:13 2008 +0200
3894 Avoid infinite loop "Generating include/autoconf.mk"
3896 Fix a bogus circular dependency that caused an infinite loop of
3897 "Generating include/autoconf.mk" again and again.
3901 commit 567fb852178dbf59529d7301620a3f3732a4b02d
3903 Date: Thu May 8 22:52:09 2008 +0200
3905 Fix @ -> <at> substitution
3907 When applying the AT91CAP9 patches upstream, something transformed
3908 the '@' character into the ' <at> ' sequence.
3910 The patch below restores the original form in all the places where
3911 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
3912 were copied from AT91CAP9, and a couple of other files where the
3913 ' <at> ' sequence was present).
3918 commit 73ccb3410a0785593cda7aee455dfc51f790e281
3920 Date: Mon Apr 28 14:04:32 2008 +0200
3922 ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
3927 commit ef2642625cbfb1c3695e3478d08ae515052a4950
3929 Date: Thu May 8 11:10:46 2008 +0200
3931 ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
3935 commit a00eccfebc954ad9485161efeca7d9aaf626d530
3937 Date: Thu May 8 11:05:15 2008 +0200
3939 ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
3941 This patch adds fdt (flattened device tree) support to all remaining AMCC
3942 eval boards. Most newer boards already support device tree. With this patch,
3943 all AMCC boards now enable device tree passing from U-Boot to Linux
3944 arch/powerpc kernels.
3948 commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
3950 Date: Thu May 8 11:01:09 2008 +0200
3952 ppc4xx: Add weak default ft_board_setup() routine
3954 This patch adds a default ft_board_setup() routine to the 4xx fdt code.
3955 This routine is defined as weak and can be overwritten by a board specific
3960 commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
3962 Date: Thu May 8 10:48:58 2008 +0200
3964 ppc4xx: acadia: Add fdt support and fix section overlap problem
3966 This patch adds fdt (flattened device tree) support to the AMCC
3967 Acadia eval board. This increases the image size and it doesn't
3968 fit anymore into 256kByte. Since we didn't want to remove features
3969 from the configuration, we decided to increase the U-Boot image size
3970 (add one flash sector).
3972 Also changed the default environment definition to make it
3973 independent of such changes.
3977 commit 4adb3023de75bc150f088c8935db340930ad38c8
3979 Date: Tue Apr 29 11:18:54 2008 -0700
3981 ppc4xx: Add device tree support to AMCC Yosemite
3983 Add support for booting with a device tree blob. This is needed to boot
3984 ARCH=powerpc kernels. Also add support for setting the eth0 mac address
3985 via the ethaddr variable.
3990 commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
3992 Date: Wed May 7 09:00:23 2008 -0700
3994 ppc4xx: Fix typos in 460GT/EX FBDV array
3996 Corrected two typos in the 460GT/EX FBDV array.
4001 commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
4003 Date: Wed May 7 16:54:31 2008 -0500
4005 85xx: Limit CPU2 workaround to parts that have the errata
4010 commit a5fe514e8ace564300d2c1d73846ddff49654243
4012 Date: Fri Apr 25 15:44:45 2008 -0500
4014 mpc83xx: system performance settings for MPC8349EMDS.
4016 These same settings are used on MPC8349ITX, and
4017 improve performance on MPC8349EMDS.
4022 commit 49387dba910e485640b575e920ee463b7e611dc3
4024 Date: Tue May 6 13:22:52 2008 +0900
4026 [MIPS] cpu/mips/cache.S: Fix build warning
4028 Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
4029 warns illegal global symbol references by bal (and jal also) instruction.
4030 This does not happen with the latest binutils v2.18.
4032 Here's an example on gth2_config:
4034 mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
4035 stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
4036 c -EB -c -o cache.o cache.S
4037 cache.S: Assembler messages:
4038 cache.S:243: Warning: Pretending global symbol used as branch target is local.
4039 cache.S:250: Warning: Pretending global symbol used as branch target is local.
4041 In principle, gas might be sensitive to global symbol references in PIC
4042 code because they should be processed through GOT (global offset table).
4043 But if `bal' instruction is used, it results in PC-based offset jump.
4044 This is the cause of this warning.
4046 In practice, we know it doesn't matter whether PC-based reference or GOT-
4047 based. As for this case, both will work before/after relocation. But let's
4050 This patch explicitly sets up a target address, then jump there.
4051 Here's an example of disassembled code with/without this patch.
4053 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20>
4054 9000066c: ac80fffc sw zero,-4(a0)
4055 90000670: 01402821 move a1,t2
4056 -90000674: 0411ffba bal 90000560 <mips_init_icache>
4057 -90000678: 01803021 move a2,t4
4058 -9000067c: 01602821 move a1,t3
4059 -90000680: 0411ffcc bal 900005b4 <mips_init_dcache>
4060 -90000684: 01a03021 move a2,t5
4061 -90000688: 03000008 jr t8
4062 -9000068c: 00000000 nop
4063 +90000674: 01803021 move a2,t4
4064 +90000678: 8f8f83ec lw t7,-31764(gp)
4065 +9000067c: 01e0f809 jalr t7
4066 +90000680: 00000000 nop
4067 +90000684: 01602821 move a1,t3
4068 +90000688: 01a03021 move a2,t5
4069 +9000068c: 8f8f81e0 lw t7,-32288(gp)
4070 +90000690: 01e0f809 jalr t7
4071 +90000694: 00000000 nop
4072 +90000698: 03000008 jr t8
4073 +9000069c: 00000000 nop
4077 commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
4079 Date: Mon May 5 14:04:00 2008 +0300
4081 Allow building mips versions with ELDK 3.1.1
4083 .gpword works only with local symbols on certain binutils versions
4087 commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
4089 Date: Mon May 5 12:52:36 2008 +0200
4091 MAKEALL: add inka4x0 board
4095 commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
4097 Date: Sun May 4 21:34:23 2008 +0200
4099 kb9202 board: fix build problem.
4103 commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
4105 Date: Sun May 4 12:10:33 2008 +0200
4107 Prepare for v1.3.3-rc3
4109 Update ChNAGELOG, minor white space cleanup.
4113 commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
4115 Date: Sun May 4 00:35:15 2008 +0200
4117 drivers/net/tsec.c: Fix typo.
4121 commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
4123 Date: Fri May 2 21:45:12 2008 -0400
4125 version_autogenerated.h: use printf rather than echo -n
4127 Some systems are dumb and do not implement the -n flag to echo (like OS X).
4128 Convert the Makefile to use printf as this should work everywhere.
4133 commit 4acc2a108ad0a669165924704a6cb083f9138242
4135 Date: Fri May 2 18:17:50 2008 -0400
4137 fix building when saveenv is disabled in some setups
4139 If you enable environment in the flash, but disable the embedded
4140 option, and you disable the saveenv command, then the #if nested
4141 logic will trigger a compile failure:
4142 env_flash.c: In function 'env_relocate_spec':
4143 env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
4144 The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
4148 commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
4150 Date: Fri May 2 16:10:04 2008 -0400
4152 SBC8548: fix address mask to allow 64M flash
4154 Fix incorrect mask to enable all 64MB of onboard flash.
4155 Previously U-Boot incorrectly mapped only 8MB of flash, this
4156 patch correctly maps all the available flash.
4160 commit 3648085c464c8c22ef76fab006ca4344d3796124
4162 Date: Fri May 2 19:48:56 2008 +0200
4164 qemu_mips: add README
4168 commit 6fdd002689190a0022c7b3dbab37fcba724580ce
4170 Date: Fri May 2 02:35:59 2008 +0200
4172 Fix misspelled comment
4176 commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
4178 Date: Thu May 1 04:13:05 2008 -0400
4180 mkimage: make mmap() checks consistent
4182 The mmap() related code is full of inconsistent casts/constants when
4183 it comes to error checking, and may break when building on some
4184 systems (like ones that do not implicitly define the caddr_t type).
4185 Let's just avoid the whole mess by writing the code nice and clean in
4190 commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
4192 Date: Thu May 1 09:05:34 2008 +0200
4194 Fix defined but not used build warning
4196 - warning: 'srom' defined but not used
4200 commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
4202 Date: Thu May 1 09:05:26 2008 +0200
4204 Fix implicit declaration build warnings
4206 - warning: implicit declaration of function ‘serial_initialize’
4210 commit 9acde129cc3f9c1b3bc11a821480dd446774d618
4212 Date: Tue Apr 29 19:18:32 2008 +0200
4214 TSEC: add config options for VSC8601 RGMII PHY
4216 The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
4217 and Tx clock lines. They are configured using 2 bits in extended
4219 Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
4220 been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
4227 drivers/net/tsec.c | 6 ++++++
4228 drivers/net/tsec.h | 3 +++
4229 2 files changed, 9 insertions(+), 0 deletions(-)
4231 commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
4233 Date: Sat May 3 23:07:15 2008 +0200
4235 Revert "ColdFire: Get information from the correct GCC"
4237 This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
4238 (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
4240 commit c4e5f52a58d278eebb87f476e353972c5dacea40
4242 Date: Sat May 3 22:25:00 2008 +0200
4244 config.mk: use correct (cross) compiler
4246 Some config.mk files reference $(CC) to test for specific tool chain
4247 features, so make sure $(CC) gets set before including any such
4250 This patch replaces commit b7166e05a5 ("ColdFire: Get information from
4255 commit 27c38689d0cfde0e444239345f97b5eecc9f4067
4257 Date: Thu May 1 02:13:44 2008 +0200
4259 pxa: fix previous definition on cpu init
4261 start.S:183:1: warning: "ICMR" redefined
4262 In file included from start.S:33:
4263 include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
4264 start.S:187:1: warning: "RCSR" redefined
4269 commit 6d12e697de794d700767f22f950e3026ccf4daf6
4271 Date: Thu May 1 02:13:43 2008 +0200
4273 pxa: fix pcmcia operation on 'i' may be undefined
4278 commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
4280 Date: Wed Apr 30 16:24:35 2008 -0500
4282 MPC8610HPCD: Drop -O2 from the build flags
4284 Make the flags use -Os like all other boards
4288 commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
4290 Date: Wed Apr 30 15:50:39 2008 +0200
4292 RTC: Fix month offset by one problem in M41T62 RTC driver
4294 This patch fixes a problem with the month being read and written
4295 incorrectly (offset by one). This only gets visible by also using
4296 the Linux driver (rtc-m41t80).
4298 Tested on AMCC Canyonlands.
4302 commit 141ba1cad8e6598a2466e7e2976c6a12285df619
4304 Date: Sat May 3 13:51:44 2008 +0900
4306 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
4308 Current trick to pick up GNU assembler minor version uses a dot(.) as a
4309 delimiter, and take the second field to obtain minor version number. But
4310 as can be expected, this doesn't work with a version string which has
4311 dots more than needs.
4315 $ mips-linux-gnu-as --version | grep 'GNU assembler'
4316 GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
4317 $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
4321 This patch restricts the version format to 2.XX.XX... This will work
4324 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
4326 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
4332 commit ea638951acead7f1086c908c0b9f086beab82a22
4334 Date: Sat May 3 13:51:28 2008 +0900
4336 [MIPS] cpu/mips/cache.S: Add dcache_enable
4338 Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
4339 "allow ports to override bootelf behavior") requires ports to have this
4345 commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
4347 Date: Thu May 1 21:30:16 2008 +0200
4349 onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
4351 Onenand needs a version of memcpy() which performs 16 bit accesses
4352 only; make sure the name does not conflict with the standard
4357 commit 12bc4e94251c369c529ffa505cf58b148c372f7f
4359 Date: Wed Apr 30 22:38:17 2008 +0200
4361 cmd_nand: fix warning: str2long ncompatible pointer type
4365 commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
4367 Date: Fri Apr 4 11:16:11 2008 -0500
4369 Fix calculation of I2C clock for some 86xx chips
4371 Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
4372 There is no pattern that can be used to determine which chips use which
4373 frequency, so the only way to determine is to look up the actual SOC
4374 designation and use the right value for that SOC.
4378 commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
4380 Date: Wed Apr 30 12:11:19 2008 -0500
4382 ColdFire: Fix ethernet hang issue for mcf547x_8x
4384 The ethernet hang is caused by receiving buffer in DRAM is not
4385 yet ready due to access cycles require longer time in DRAM.
4386 Relocate DMA buffer descriptors from DRAM to internal SRAM.
4390 commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
4392 Date: Wed Apr 30 12:10:47 2008 -0500
4394 ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
4399 commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
4401 Date: Wed Apr 30 12:10:23 2008 -0500
4403 ColdFire: Get information from the correct GCC
4408 commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
4410 Date: Wed Apr 30 18:02:59 2008 +0200
4412 Fix warning in env_nand.c if compiled for DaVinci Schmoogie
4416 nv_nand.c: In function 'saveenv':
4417 env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
4418 env_nand.c: In function 'env_relocate_spec':
4419 env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
4421 if compiled for davinci_schmoogie_config.
4426 commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
4428 Date: Wed Apr 30 13:34:40 2008 +0200
4430 Fix warnings while compiling net/net.c for MPC8610HPCD board
4432 MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
4433 causing overriding default -Os option. New gcc (ver. 4.2.2)
4434 produces warnings while compiling net/net.c file with -O2
4435 option. The patch is an attempt to fix this.
4439 commit 58b575e575c25fdf8c88141e145db201f3092149
4441 Date: Wed Apr 30 15:23:38 2008 +0200
4443 lwmon5: fix offset error in sysmon0 POST
4448 commit e7419b243a373de4ee042f7d4f45f66de787240d
4450 Date: Wed Apr 30 15:16:35 2008 +0200
4452 lwmon5: fix manual merge error in POST
4456 commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
4458 Date: Wed Apr 30 17:46:26 2008 +0200
4460 cmd_nand.c: fix another 'incompatible pointer type' warning.
4464 commit de109d909707e2dfe806be5efc3cdb103b47c8ad
4466 Date: Wed Apr 30 17:25:07 2008 +0200
4468 Makefile: fix parallel builds
4470 This problem shows up with parallel builds only; it results in
4471 somewhat cryptic error messages like
4473 $ JOBS=-j6 MAKEALL netstar
4474 Configuring for netstar board...
4475 arm-linux-ld: cannot find -lgeneric
4476 make[1]: *** [eeprom.srec] Error 1
4478 A few boards (like netstar and voiceblue) need some libraries for
4479 building; however, the board Makefile does not contain any such
4480 dependencies which may cause problems with parallel builds. Adding
4481 such dependencies is difficult as we would also have to provide build
4482 rules, which already exist in the respective library Makefiles.
4484 To solve this, we make sure that all libraries get built before the
4489 commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
4491 Date: Wed Apr 30 14:51:36 2008 +0200
4493 ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
4495 This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
4496 used for NAND booting to match the values needed for the new 512MB
4497 DIMM modules shipped with the productions boards:
4499 Crucial: CT6464AC667.8FB
4503 commit ea9202a659dc75996facf1475f1866a19a9d3129
4505 Date: Wed Apr 30 10:49:43 2008 +0200
4507 ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
4509 This patch fixes a problem with DIMMs that have 8 banks. Now the
4510 MCIF0_MBxCF register will be setup correctly for this setup too.
4512 This was noticed with the 512MB DIMM on Canyonlands/Glacier.
4516 commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
4518 Date: Tue Apr 29 23:41:06 2008 +0200
4520 Prepare v1.3.3-rc2, again.
4524 commit b7fcc4c13993782342cf5cd20d237a6281648a0b
4526 Date: Tue Apr 29 23:35:24 2008 +0200
4532 commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
4534 Date: Tue Apr 29 23:32:20 2008 +0200
4536 common/env_nand.c: fix one more incompatible pointer type issue
4540 commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
4542 Date: Tue Apr 29 21:33:08 2008 +0200
4544 post/board/lwmon5/sysmon.c: fix manual merge error.
4548 commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
4550 Date: Tue Apr 29 12:54:59 2008 -0500
4552 85xx: Add -mno-spe to e500/85xx builds
4554 Newer gcc's might be configured to enable autovectorization by default.
4555 If we happen to build with one of those compilers we will get SPE
4556 instructions in random code.
4558 -mno-spe disables the compiler for automatically generating SPE
4559 instructions without our knowledge.
4563 commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
4565 Date: Tue Apr 29 10:18:34 2008 -0500
4567 Update .gitignore for zlib.h
4571 commit 45239cf4152109caa925145ccd433529902df887
4573 Date: Tue Apr 29 10:27:08 2008 -0500
4575 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
4577 All the 85xx and 86xx UM describe the register as timing_cfg_3
4582 commit ef7d30b14394e4c4a153118f5845760cadada02a
4584 Date: Tue Apr 29 10:28:34 2008 -0500
4586 85xx/86xx: Rename DDR init address and init extended address register
4588 Rename init_addr and init_ext_addr to match the docs between
4589 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
4593 commit cf6cc014270549684873a5972d2595052c468cb6
4595 Date: Mon Apr 28 02:24:04 2008 -0500
4597 85xx: Additional fixes and cleanup of MP code
4599 * adjust __spin_table alignment to match ePAPR v0.94 spec
4600 * loop over all cpus when determing who is up. This fixes an issue if
4601 the "boot cpu" isn't core0. The "boot cpu" will already be in the
4602 cpu_up_mask so there is no harm
4603 * Added some protection in the code to ensure proper behavior. These
4604 changes are explicitly needed but don't hurt:
4605 - Added eieio to ensure the "hot word" of the table is written after
4606 all other table updates have occurred.
4607 - Added isync to ensure we don't prefetch loading of table entries
4610 These issues we raised by Dave Liu.
4614 commit b2d527a8b9fb50afccbaf79b5540952585cdc760
4616 Date: Tue Apr 29 15:06:41 2008 +0200
4618 lwmon5: minor clean-up to include/configs/lwmon5.h
4620 LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
4621 the CFG_DSPIC_TEST_ADDR definition more readable.
4625 commit f4c4d21a885ccc222fd0acdf653b683249e85117
4627 Date: Tue Apr 29 16:08:05 2008 +0200
4629 ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
4633 commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
4635 Date: Tue Apr 29 13:32:45 2008 +0200
4637 ppc flush_cache: add watch-dog triggering into the loops.
4639 Some boards (e.g. lwmon5) need rather a frequent watch-dog
4640 kicking. Since the time it takes for the flush_cache() function
4641 to complete its job depends on the size of data being flushed, one
4642 may encounter watch-dog resets on such boards when, for example,
4643 download big files over ethernet.
4647 commit cab99d6f3281ab6784feccf98b9b425daa58418a
4649 Date: Tue Apr 29 14:44:54 2008 +0200
4651 ppc4xx: Fix compilation warning in denali_spd_ddr2.c
4655 commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
4657 Date: Tue Apr 29 14:12:07 2008 +0200
4659 ppc4xx: Fix Katmai CFG_MONITOR_LEN
4663 commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
4665 Date: Tue Apr 29 13:57:07 2008 +0200
4667 ppc4xx: Complete remove bogus dflush()
4669 Since the current dflush() implementation is know to have some problems
4670 (as seem on lwmon5 ECC init) this patch removes it completely and replaces
4671 it by using clean_dcache_range().
4673 Tested on Katmai with ECC DIMM.
4677 commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
4679 Date: Tue Apr 29 13:36:51 2008 +0200
4681 ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
4683 As it seems the "old" ECC initialization routine by using dflush() didn't
4684 write all lines in the dcache back to memory on lwmon5. This could lead
4685 to ECC error upon Linux booting. This patch changes the program_ecc()
4686 routine to now use clean_dcache_range() instead of dflush().
4687 clean_dcache_range() uses dcbst which is exactly what we want in this
4690 Since dflush() is known is cause problems, this routine will be
4691 removed completely and replaced by clean_dcache_range() with an
4696 commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
4698 Date: Mon Apr 28 18:19:34 2008 +0200
4700 POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
4704 commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
4706 Date: Mon Apr 28 08:47:47 2008 +0200
4708 ppc4xx: Fixup ebc clock in FDT for 405GP/EP
4710 On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
4711 and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
4716 commit 2ef7503a593c77a80c2a054011970227c4b62774
4718 Date: Thu Apr 24 07:57:17 2008 +0200
4720 NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
4722 Move non-inlied functions into specific drivers file
4723 Set get_prom as weak
4729 commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
4731 Date: Thu Apr 3 17:04:19 2008 +0200
4733 net: make ARP timeout configurable
4735 Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
4736 On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
4737 to the boards get lost, which typically are ARP replies. By configuring
4738 the timeout to a lower value we significantly improve the first network
4739 transfer time on this board. The timeout is specified in milliseconds,
4740 later internally it is converted to deciseconds, because it has to be
4741 converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
4747 commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
4749 Date: Thu Apr 3 13:36:18 2008 +0200
4751 minor cs8900 driver clean up
4753 Remove a redundant register definition, clean up some coding style
4759 commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
4761 Date: Mon Apr 28 22:01:04 2008 +0200
4763 jffs2_1pass.c: fix incompatible pointer type warning
4767 commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
4769 Date: Tue Apr 1 10:10:18 2008 +0200
4771 lwmon5: update dsPIC POST spezification
4773 The specification for the lwmon5 board dsPIC POST got changed.
4774 Also add defines for the temperatures and voltages.
4778 commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
4780 Date: Tue Apr 1 15:13:03 2008 +0200
4782 Fix watchdog POST for lwmon5
4784 If the hardware watchdog detects a voltage error, the watchdog sets
4785 GPIO62 to low. The watchdog POST has to detect this low level.
4790 commit dd5748bcd669f46aeb6686c1b341323843738ccc
4792 Date: Mon Apr 28 14:37:14 2008 +0200
4794 rtl8169: fix compiler warnings
4796 Fix multiple compiler warnings related to argument type mismatch.
4800 commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
4802 Date: Mon Apr 28 14:36:06 2008 +0200
4804 IDE: fix compiler warnings
4806 The IDE driver can use 32-bit addresses in LBA mode, in which case it
4807 spits multiple warnings during compilation. Fix them.
4811 commit db9084de28c46ac81c8f681722cb0d7411be4d7f
4813 Date: Mon Apr 28 14:35:57 2008 +0200
4815 LinkStation: fix compiler warning, add a maintainer
4817 out_8 wants a pointer to an unsigned as the first argument. Add a
4818 maintainer for Linkstation boards.
4822 commit c71abba3cb67b063f789f17abf6c7447727c0cd5
4824 Date: Mon Apr 28 14:55:12 2008 +0200
4826 cmd_nand.c: fix "differ in signedness" problem
4830 commit f2c288a35341ad02ac03b1563d786763c9c8f159
4832 Date: Mon Apr 28 12:48:47 2008 +0200
4834 pcnet.c: fix a merge issue
4838 commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
4840 Date: Mon Apr 28 12:08:18 2008 +0200
4842 NAND: fix some strict-aliasing compiler warnings
4846 commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
4848 Date: Mon Apr 28 11:37:14 2008 +0200
4850 ppc4xx: Fix compile warning of hcu4 board
4854 commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
4856 Date: Mon Apr 28 11:31:23 2008 +0200
4858 MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
4862 commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
4864 Date: Mon Apr 28 00:25:32 2008 +0200
4866 mx31ads: fix loadaddr environment variable define
4868 Arithmetic expressions do not get evaluated under stringification. Remove
4869 default network configuration, add DHCP command support. Thanks to Felix
4870 Radensky for reporting.
4874 commit 144eec777ac07bcb12bd38245a5a289f694a7f98
4876 Date: Mon Apr 28 10:55:24 2008 +0200
4878 katmai: fix section overlap problem
4880 Since we didn't want to remove features from the configuration, we
4881 decided to increase the U-Boot image size (add one flash sector).
4883 Also changed the default environment definition to make it
4884 independent of such changes.
4889 commit 941d696d25624e3cc65ebf924199541acf52d74e
4891 Date: Mon Apr 28 10:55:24 2008 +0200
4893 katmai: fix section overlap problem
4895 Since we didn't want to remove features from the configuration, we
4896 decided to increase the U-Boot image size (add one flash sector).
4898 Also changed the default environment definition to make it
4899 independent of such changes.
4904 commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
4906 Date: Sat Apr 26 11:44:44 2008 -0500
4908 post: Fix building with O=
4912 commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
4914 Date: Sat Apr 26 01:55:00 2008 +0200
4920 commit 19cf2ec90d8ce52da60c1693693c4048cb810967
4922 Date: Sat Apr 26 01:25:39 2008 +0200
4924 post/Makefile: make sure to use the correct flags
4926 ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
4927 messages to be printed.
4931 commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
4933 Date: Sat Apr 26 00:34:42 2008 +0200
4935 Coding Style cleanup, update CHANGELOG
4939 commit f9204e15173834ff8d123e36279ce49c3c6c74fc
4941 Date: Sun Apr 20 10:38:12 2008 +0200
4943 i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
4945 This patch enables SPI and MC13783/RTC support for the Litekit board.
4949 commit f97abbfb47d9e407354e157cae3f6369e460cd37
4951 Date: Fri Apr 25 01:08:32 2008 -0500
4953 MPC8544DS: decode pcie3 end-point configuration correctly.
4958 commit 292188e15523c165c4269403fdcd33c26d89176e
4960 Date: Fri Apr 25 00:55:09 2008 -0500
4962 MPC8544DS: Removes the unknown flash message information
4964 This patch removes the unknown flash message information:
4965 '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
4966 This unknown flash message is caused by PromJet.
4967 Some of the board user is unhappy with this information.
4972 commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
4974 Date: Thu Apr 24 14:07:38 2008 -0500
4976 mpc83xx: bump loadaddr over fdtaddr to 0x500000
4978 this seems as a good compromise between human memory, typing,
4979 and last but not least, to accommodate for current and future kernel bloat.
4984 commit be5a7190265a34d968578ff266549c60f6f57654
4986 Date: Tue Apr 15 13:12:23 2008 +0800
4988 mpc83xx: clean up the readme for 83xx boards
4991 2. correct the memory map for 837xerdb board
4995 commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
4997 Date: Tue Apr 15 13:11:11 2008 +0800
4999 mpc83xx: remove the unused CPM's stuff
5001 The MPC83xx family never have CPM block, so remove it from 83xx.
5005 commit c63ad6325a8ac0097a54b418a3288926b0484b18
5007 Date: Fri Apr 18 16:29:40 2008 +0200
5009 cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
5011 This patch adds a configurable flash auto protection list that can be used
5012 to make U-Boot protect flash regions in flash_init().
5014 The idea has been discussed on the u-boot mailing list starting
5017 Even this patch brings a new feature it is used as a bugfix for 4xx
5018 platforms where flash_init() does not completely protect the
5019 monitor's flash range in all situations.
5021 U-Boot protects the flash range from CFG_MONITOR_BASE to
5022 (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
5023 include the reset vector at 0xfffffffc.
5026 #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
5028 This config option will auto protect the last 512k of flash that
5029 contains the bootloader on board like APC405 and PMC405.
5033 commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
5035 Date: Fri Apr 25 13:59:03 2008 +0200
5037 ppc4xx: Remove double defines in lwmon5.h
5039 introduced with latest lwmon5/POST merge
5043 commit 7590378fb9c686709492ceb142825cd058255956
5045 Date: Fri Apr 25 13:54:02 2008 +0200
5047 Use watchdog-aware functions when calculating hashes of images - take two
5049 Some files didn't get updated properly with the "Use watchdog-aware
5050 functions when calculating hashes of images" commit, this commit
5056 commit 8e048c438e20ec89b49da5f085f8f756eba6e587
5058 Date: Fri Apr 25 12:01:39 2008 +0200
5060 ppc4xx: Add bootcount limit handling for APC405 boards
5064 commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
5066 Date: Fri Apr 25 12:10:09 2008 +0200
5068 Use watchdog-aware functions when calculating hashes of images
5072 commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
5074 Date: Fri Apr 25 12:44:08 2008 +0200
5076 USB: fix more GCC 4.2.x aliasing warnings
5081 commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
5083 Date: Fri Apr 25 12:41:53 2008 +0200
5085 lib_generic/crc32.c: add missing #include <watchdog.h>
5089 commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
5091 Date: Fri Apr 25 11:52:21 2008 +0200
5093 lib_generic/crc32.c: fix compile problem
5097 commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
5099 Date: Tue Apr 22 12:20:32 2008 +0200
5101 ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
5103 The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
5104 environment variable will now get passed to the Linux kernel by setting
5105 the device_type property of the PCIe device tree node. For normal root-
5106 complex configuration it will keep its defaults value of "pci" and for
5107 endpoint configuration it will get changed to "pci-endpoint".
5111 commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
5113 Date: Thu Apr 24 10:30:53 2008 +0200
5115 lwmon5: watchdog POST fix
5117 Use the GPT0_MASKx registers as the temporary storage for watch-dog
5118 timer POST test instead of GPT0_COMPx. The latter
5119 (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
5124 commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
5126 Date: Mon Apr 21 18:10:14 2008 -0500
5128 lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
5130 This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
5131 proven problematic getting right from the start at least on 83xx and
5136 commit a99715b8ebfc500f3f40e01b36b64d473938443d
5138 Date: Fri Apr 18 14:50:01 2008 +0200
5140 Realining some header definitions.
5144 commit 4acbc6c7f993cae409c424615415a3e76820f13d
5146 Date: Thu Apr 24 07:57:16 2008 +0200
5148 NE2000: coding style cleanup
5152 commit b4aff1ffaf7120032c653357c007faa14f74d29d
5154 Date: Wed Apr 23 00:11:47 2008 +0900
5156 qemu-mips.h: Add CFI support
5158 CONFIG_ENV_OVERWRITE is also added.
5160 This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
5165 commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
5167 Date: Tue Apr 22 22:47:27 2008 +0900
5169 doc/README.mips: Add MIPS notes
5173 commit 215b01bba8bc662d35f72b084700b192d367dfb4
5175 Date: Tue Apr 22 12:27:56 2008 +0200
5177 Add support for calculating hashes with watchdog triggering
5179 Implement watchodg-aware variants of hash calculation functions:
5183 The above functions calculate the hash of the input buffer in chunks,
5184 triggering the watchdog after processing each chunk. The chunk size
5185 is given as a function call parameter.
5189 commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
5191 Date: Wed Apr 23 11:02:12 2008 +0900
5193 qemu-mips: Cleanup whitespace, indentation, etc.
5195 No functional change.
5197 This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
5198 Then I re-created from scratch, and changed more lines than the original.
5203 commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
5205 Date: Wed Oct 10 23:02:09 2007 +0300
5209 Bus and phys address are not always the same
5213 commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
5215 Date: Thu Apr 24 23:44:26 2008 +0200
5217 drivers/net/pcnet.c: Coding Style cleanup.
5221 commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
5223 Date: Wed Oct 10 23:04:23 2007 +0300
5225 Added Am79C970A chip id to pcnet
5229 commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
5231 Date: Sun Apr 20 10:35:03 2008 +0200
5233 i.MX31: Fix architecture numbers for ADS and Litekit boards
5235 Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
5239 commit e7ae84d6c7288790e88639f57cb60daf89c11369
5241 Date: Sun Apr 20 10:36:36 2008 +0200
5243 i.MX31: Use symbolic names for Litekit membases.
5245 Use symbolic names instead of hard coded addresses for Litekit membases.
5249 commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
5251 Date: Sat Apr 19 17:59:20 2008 +0200
5253 Fix show_boot_progress prototype
5255 in commit fad634071 "make show_boot_progress () weak."
5256 show_boot_progress is supposed to be declared as weak but declared as
5261 commit edbed247a14d70b94958010f736621212285de91
5263 Date: Fri Apr 18 12:39:23 2008 +0200
5265 Memory footprint optimizations
5267 As suggested by Wolfgang Denk:
5268 - image printing functions:
5270 - remove indentation prefix from functions' signatures
5271 - merge getenv_verify and getenv_autostart into one parametrized function
5275 commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
5277 Date: Tue Apr 15 13:33:11 2008 +0200
5279 MX31ADS environment variable update, spi and rtc support
5281 Update MX31ADS default environment to better match the flash layout and
5282 the memory map, support SPI and RTC.
5286 commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
5288 Date: Mon Apr 21 09:28:36 2008 -0500
5290 85xx: Round up frequency calculations to get reasonable output
5292 eg. because of rounding error we can get 799Mhz instead of 800Mhz.
5294 Introduced DIV_ROUND_UP and roundup taken from linux kernel.
5301 commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
5303 Date: Wed Apr 23 16:58:04 2008 -0500
5305 fsl_pci: Only modify registers if we have them
5307 pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
5311 commit 83fe32334337def160b302aa9d152d808bfcc68e
5313 Date: Wed Apr 23 10:57:33 2008 +0200
5315 USB: remove a cpu bug workaround for an unsupported architecture.
5319 commit f957576cb53e6cfab412709cfc8db1afd39d21c3
5321 Date: Wed Apr 23 10:53:23 2008 +0200
5323 USB: fix those pesky aliasing warnings issued by gcc-4.2
5328 commit 89cdab788f3716b335fefb60b836ebcf975aceab
5330 Date: Mon Mar 31 11:02:01 2008 -0400
5332 crc32: use uint32_t rather than unsigned long
5334 The envcrc.c does sizeof(unsigned long) when calculating the crc, but
5335 this is done with the build toolchain instead of the target tool
5336 chain, so if the build is a 64bit system but the target is 32bits,
5337 the size will obviously be wrong. This converts all unsigned long
5338 stuff related to crc32 to uint32_t types. Compile tested only: output
5339 of ./tools/envcrc when run on a 32bit build system matches that of a
5345 commit 80c40b765b3642ddb9f3392b7898715aab44a29c
5347 Date: Wed Mar 26 09:53:29 2008 +0100
5349 ARM: Davinci: Fix DM644x timer overflow handling and cleanup
5351 Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
5355 - Remove *_masked() functions as noted by Wolfgang
5357 - Adapt register naming to recent TI spec (sprue26, March 2007)
5359 - Fix reset_timer() handling
5361 - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
5363 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
5365 - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
5369 Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
5374 commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
5376 Date: Wed Apr 9 16:09:41 2008 +0200
5378 Added watchdog triggering calls in the "mtest" test function.
5382 commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
5384 Date: Sun Apr 6 19:19:14 2008 +0200
5386 lwmon5 watchdog: limit trigger rate
5388 Limit the rate of h/w watch-dog triggering on the LWMON5 board by
5389 the CONFIG_WD_MAX_RATE value.
5391 Note that an earlier version of this patch which used microseconds
5392 instead of ticks dis not work. The problem was that we used
5393 usec2ticks() to convert microseconds into ticks. usec2ticks() uses
5394 get_tbclk(), which in turn calls get_sys_info(). It turns out that
5395 this function does a lot of prolonged operations (like divisions)
5396 which take too much time so we do not trigger the watchdog in time,
5397 and it resets the system.
5401 commit 2d2b994a30bb100774dc747ae9865b7f95285a88
5403 Date: Mon Mar 31 10:51:37 2008 +0200
5405 POST: move CONFIG_POST to Makefiles
5407 Introduce the new logical option CONFIG_HAS_POST which is set when the
5408 platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
5409 to determine should the POST libs be compiled for the selected target
5412 To avoid breaking u-boot linking process, the empty post/libpost.a file is
5413 created for platforms which do not have POSTs.
5418 commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
5420 Date: Mon Mar 31 10:49:34 2008 +0200
5422 POST: preparations for moving CONFIG_POST to Makefiles
5424 Remove CONFIG_POST ifdefs from the post/ source files.
5429 commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
5431 Date: Tue Apr 22 14:14:20 2008 +0200
5433 ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
5435 This patch fixes the Canyonlands and Glacier default environment to better
5436 fit to the arch/powerpc device-tree kernels. The variables dealing with
5437 arch/ppc booting are removed, since these boards are supported only in
5438 arch/powerpc. Glacier uses the same config file as Canyonlands.
5440 Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
5444 commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
5446 Date: Tue Apr 22 14:06:42 2008 +0200
5448 ppc4xx: Small coding style cleanup for the latest esd patches
5452 commit 79941d63bc03aed8c48d7602f18217cc200ee931
5454 Date: Mon Apr 21 18:01:07 2008 +0200
5456 ppc4xx: Update CPU strapping for PMC440 boards
5458 This patch removes the temporary 'test' strapping option
5459 of the sbe command. The '667' strapping option now uses
5460 a PLB/PCI divider of 3.
5464 commit f00cf3193a6635355b121e90debb2f54e777e7da
5466 Date: Mon Apr 21 14:42:21 2008 +0200
5468 ppc4xx: Remove unused APC405 strataflash driver
5470 The APC405 board support has been migrated to use the common
5475 commit 1c686676a86473bbd92151f0544e109413f6ed06
5477 Date: Mon Apr 21 14:42:17 2008 +0200
5479 ppc4xx: Update APC405 configuration
5481 - enable esd's auto_update mechanism
5482 - support alternative flash layout on rev. 1.8 boards
5483 - update default environment
5484 - use common CFI flash driver
5485 - coding style cleanup
5489 commit 0b9872515a521bf7866dc24b85ddce708e60d702
5491 Date: Mon Apr 21 14:42:11 2008 +0200
5493 ppc4xx: Update APC405 board support
5495 - enable esd's auto_update mechanism
5496 - fix LCD support on latest hardware revision (uses other LCD controller)
5497 - support alternative flash layout on rev. 1.8 boards
5498 - coding style cleanup
5502 commit 83975d02e225e231960784972e7820a8b303756b
5504 Date: Mon Apr 21 14:42:06 2008 +0200
5506 ppc4xx: update esd's common auto_update code for 405 boards
5508 - Coding style cleanup (long lines)
5509 - improve handling of protected flash regions
5514 commit b9233fe5d59cb25d975071616bd1035d6f4c2285
5516 Date: Mon Apr 21 14:41:59 2008 +0200
5518 ppc4xx: Update esd's common LCD code for 405 boards
5520 - Coding style cleanup (long lines)
5521 - Add s1d13505 support
5522 - Make some functions return a result code instead of void
5526 commit dea68189424c3f1242427a8146a3861bf093173c
5528 Date: Mon Apr 21 11:36:55 2008 +0200
5530 ppc4xx: Update FPGA image for APC405 boards
5534 commit 2a05b152924acfcec3b037693329e517e6d3578f
5536 Date: Mon Apr 21 11:36:08 2008 +0200
5538 ppc4xx: Update bootlogo for APC405 boards
5542 commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
5544 Date: Fri Apr 18 16:41:31 2008 +0200
5546 ppc4xx: Add dcache_enable() for 440
5548 dcache_enable() was missing for 440 and the patch
5549 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
5550 "] behavior uses this function.
5552 Note: Currently the cache handling functions like
5553 d/icache_disable/enable() are NOP's on 440. This may be changed in the
5558 commit a49e0d177a0749614b316ec847fb623f09c82c07
5560 Date: Mon Apr 21 11:19:04 2008 +0200
5562 video: Add missing free for logo memory
5564 This patch adds two missing free()s.
5568 commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
5570 Date: Mon Sep 24 16:41:43 2007 -0700
5572 PATCH - Fix oob data copied into supplied buffer
5574 This patch correctly sets the oobavail variable
5575 and fixes a bug where the oob data was not valid when
5576 there where multiple groups in oobfree.
5578 First segment fixes a typo
5579 Second segment fixes a bug where oob data may be copied incorrectly.
5580 Third segment adds an error message when exiting due to write protect.
5581 Forth segment fixes a bug where oobavail may be set incorrectly.
5585 commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
5587 Date: Fri Apr 18 17:24:32 2008 +0200
5589 ppc4xx: Fix sys_get_info() for 405GP(r)
5591 This patch assigns the correct EBC clock for 405GP(r) CPUs
5592 to PPC4xx_SYS_INFO structure. Without this patch U-Boot
5593 uses an uninitialized EBC clock in its startup message.
5597 commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
5599 Date: Sun Apr 20 15:39:38 2008 -0700
5601 Makefile: remove nand_spl/System.map when cleaning up.
5603 commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
5605 Date: Sun Apr 20 15:35:52 2008 -0700
5607 MAKEALL: sort entries / lists.
5611 commit 0878af169b181868a105b5c33f3a6423e2c9fd60
5613 Date: Fri Apr 18 11:29:01 2008 -0500
5615 85xx: Fix size of cpu-release-addr property
5617 The cpu-release-addr is defined as always being a 64-bit quanity regardless
5618 if we are running on a 32-bit or 64-bit machine.
5620 commit 88353a985109562a639b2f8a0c90d77011bfe374
5622 Date: Fri Apr 4 11:15:58 2008 -0500
5624 Fix calculation of I2C clock for some 85xx chips
5626 Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
5627 some use CCB/3. There is no pattern that can be used to determine which
5628 chips use which frequency, so the only way to determine is to look up the
5629 actual SOC designation and use the right value for that SOC.
5631 Update immap_85xx.h to include the GUTS PORDEVSR2 register.
5635 commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
5637 Date: Fri Apr 18 11:44:27 2008 -0700
5639 Fix build breakage casued by commit c0559be371b2
5641 Change env_get_char from a global function ptr to a function.
5645 commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
5647 Date: Fri Apr 18 10:53:41 2008 -0700
5649 Coding Style cleanup, update CHANGELOG.
5653 commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
5655 Date: Tue Apr 8 14:00:57 2008 -0400
5657 Add support for u-boot in svn and localversion-* files
5661 commit d23ff6827decf121461fbc5622612fd7effe207e
5663 Date: Thu Apr 3 17:04:22 2008 +0200
5665 MX31ADS network and flash updates
5667 This patch allows U-Boot to use buffered writes to the Spansion NOR
5668 flash installed on this board, and eliminates long delays in network
5669 transfers after the board startup.
5671 Also modify flash layout to embed main and redundant environment
5672 blocks in the U-Boot image.
5676 commit b5dc9b304d289831f291843ff88a45cbdf1a6290
5678 Date: Mon Apr 14 10:53:12 2008 +0200
5680 Support for the MX31ADS evaluation board from Freescale
5682 This patch adds support for the MX31ADS evaluation board from Freescale,
5683 initialization code is copied from RedBoot sources, also provided by
5688 commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
5690 Date: Tue Apr 8 10:33:29 2008 +0200
5692 ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
5696 commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
5698 Date: Tue Apr 8 10:33:28 2008 +0200
5700 ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
5704 commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
5706 Date: Tue Apr 8 10:33:27 2008 +0200
5708 ppc4xx: Add Glacier NAND booting target
5712 commit 46f373838e384a4c23d13581b1dfa5acb66b5810
5714 Date: Tue Apr 8 10:31:00 2008 +0200
5716 nand_spl: Update nand_spl to support 2k page size NAND devices
5718 This patch adds support for booting from 2k page sized NAND device
5719 (e.g. Micron 29F2G08AAC).
5721 Tested on AMCC Canyonlands.
5725 commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
5727 Date: Thu Apr 17 18:18:00 2008 +0200
5729 Fix crash on sequoia in ppc_4xx_eth_init
5731 Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
5732 with cache enabled (TLB Parity exeption). This patch
5737 commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
5739 Date: Thu Apr 17 18:15:27 2008 +0200
5741 ppc4xx: Fix crash on sequoia with cache enabled
5743 Currently U-Boot crashes on sequoia board in CPU POST if
5744 cache is enabled (CONFIG_4xx_DCACHE defined). The cache
5745 won't be disabled by change_tlb before CPU POST because
5746 there is an insufficient adress range check since
5747 CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
5752 commit 43c509254fab375c49936498da944658117ed07c
5754 Date: Thu Apr 17 23:35:13 2008 +0900
5756 Use jr as register jump instruction
5758 Current assembler codes are inconsistent in the way of register jump
5759 instruction usage; some use jr, some use j. Of course GNU as allows both
5760 usages, but as can be expected from `Jump Register' the mnemonic `jr' is
5761 more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
5766 commit 7ce63709828d37b08866e537339a169bd0db2bd3
5768 Date: Tue Apr 15 14:15:30 2008 +0200
5770 RTC driver for MC13783
5772 MC13783 is a multifunction IS with an SPI interface to the host. This
5773 driver handles the RTC controller in this chip.
5777 commit 38254f45b0b412332726c90d3184ad47479fcffb
5779 Date: Tue Apr 15 14:14:25 2008 +0200
5781 New i.MX31 SPI driver
5783 This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
5784 only implemented and tested on i.MX31, can with a modified register layout
5785 and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
5790 commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
5792 Date: Tue Apr 15 19:09:10 2008 +0200
5794 Fix name of i.MX31 boards in config file header
5796 Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
5800 commit a49864593e083a5d0779fb9ca98e5a0f2053183d
5802 Date: Sun Apr 13 19:42:19 2008 -0400
5804 allow ports to override go behavior
5806 Split the arch-specific logic out of the common go code and into a dedicated
5807 weak function called do_go_exec() that lives in cpu directories. This will
5808 need review from i386/nios people to make sure I didn't break them.
5810 commit 017e9b7925f74878d0e9475388cca9bda5ef9482
5812 Date: Sun Apr 13 19:42:18 2008 -0400
5814 allow ports to override bootelf behavior
5816 Change the bootelf setup function into a dedicated weak function called
5817 do_bootelf_exec. This way ports can control the behavior however they
5818 like before/after calling the ELF entry point.
5820 commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
5822 Date: Sat Apr 12 20:56:03 2008 +0200
5824 Reorder ARM boards in Makefile
5826 Rearrange ARM boards in Makefile so that ARM926EJ-S boards
5827 are no longer under ARM92xT header.
5832 commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
5834 Date: Sat Apr 12 20:29:44 2008 +0200
5836 Clean up dataflash partitioning
5838 This patch removes the board dependent parts from
5839 "drivers/mtd/dataflash.c".
5840 Each board relying on this, will have the appropriate
5841 code in a new file, "partition.c" in the board directory.
5842 board Makefiles updated to use the file.
5844 The dataflash partitions are aligned on sector/page boundaries.
5846 The CONFIG_NEW_DF_PARTITION was used to create named partitions
5847 This is now the default operation, and the CONFIG variable is removed.
5851 commit 51ecde946fec511a16346e498204ca10ad71080d
5853 Date: Sat Apr 12 14:08:45 2008 +0200
5855 gitignore: udpate stgit generated and .patch file
5859 commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
5861 Date: Fri Apr 18 00:15:36 2008 -0700
5863 Get rid of redundant copy of renamed header file.
5867 commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
5869 Date: Fri Apr 11 21:20:14 2008 +0300
5871 Fix dependency generation for older gcc versions
5873 With gcc 3.3.3 at least, compilation fails with
5875 Generating include/autoconf.mk
5876 gcc: compilation of header file requested
5877 make: *** [include/autoconf.mk] Error 1
5879 since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
5883 commit cb1c4896905ab22fcd982e6a8a539f0031942e71
5885 Date: Fri Apr 11 11:07:49 2008 +0200
5887 Restore the ability to continue booting after legacy image overwrite
5889 Before new uImage code was merged, bootm code allowed for the kernel image to
5890 get overwritten during decompresion. new uImage introduced a check for image
5891 overwrites and refused to boot the image that got overwritten. This patch
5892 restores the old behavior. It also adds a warning when the image overwriten is
5893 a multi-image file, because in such case accessing componentes other than the
5894 first one will fail.
5898 commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
5900 Date: Fri Apr 11 11:07:43 2008 +0200
5902 ppc: Fix ftd_blob variable init when processing raw blob
5904 Set fdt_blob variable before its value is printed out.
5908 commit 3d36be030043cd841a2551d00a395135e363a64b
5910 Date: Thu Apr 10 14:30:16 2008 -0500
5912 Remove all the search paths from the .lds files.
5914 The cross compiler is responsible for providing the correct libraries
5915 and the logic to find the linking libraries.
5919 commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
5921 Date: Mon Apr 14 15:44:16 2008 +0200
5923 Boot-related documentation update
5925 - document 'bootm_low' and 'bootm_size' environment variables
5926 - update inaccurate CFG_BOOTMAPSZ entry
5930 commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
5932 Date: Wed Apr 9 17:34:08 2008 +0200
5934 Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
5936 Restore logic reverted by commit
5938 commit 80767a6cead9990d9e77e62be947843c2c72f469
5940 Date: Wed Sep 5 16:04:41 2007 +0100
5942 Changed API name to coloured_led.h
5943 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
5944 Tidied other cpu/arm920t/start.S code
5948 commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
5950 Date: Tue Apr 8 10:24:24 2008 -0400
5952 Remove conflicting NAND ID
5954 There are two NAND entries with ID 0xDC and this obviously causes problems.
5955 In the kernel, they punted the first entry, so we should do the same.
5957 See this upstream e-mail for more info:
5958 http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
5963 commit 188e94c370621708d13547d58dbc6ed3c5602aa8
5965 Date: Tue Apr 8 16:20:35 2008 +0900
5967 cpu/mips/cpu.c: Fix flush_cache bug
5969 Cache operations have to take line address (addr), not start_addr.
5970 I noticed this bug when debugging ping failure.
5974 commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
5976 Date: Thu Apr 3 14:29:01 2008 +0200
5978 TQM5200: fix default IDE reset level
5980 Before the first call of ide_reset(), the level of the IDE reset
5981 signal on the TQM5200 is low (reset asserted). This patch sets the
5982 default value to high (reset not asserted).
5984 Currently this patch fixes no real problem, but it is cleaner to
5985 assert the reset signal only on demand, and not permanently.
5989 commit c61e033d6e8abb7b4060ee36060961e1399f6079
5991 Date: Thu Apr 3 14:18:48 2008 +0200
5993 mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
5997 commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
5999 Date: Thu Apr 3 14:18:47 2008 +0200
6001 mgcoge, mgsuv: rename 'addcon' to 'addcons'
6003 The latter name with 13 users is already established, so we will use
6008 commit e175eacc87c3a9e4dad0799fee0e95732520afc7
6010 Date: Thu Apr 3 13:37:56 2008 +0200
6012 IDE: fix bug in reset sequence
6014 According to the ata (ata5) specification the RESET- signal
6015 shall be asserted for at least 25 us. Without this patch,
6016 the RESET- signal is asserted on some boards for only < 1 us
6017 (e. g. on the TQM5200). This patch adds a general delay of
6018 25 us to the RESET- signal.
6020 Without this patch a Platinum 4 GiB CF card is not recognised
6021 properly on boards with a TQM5200 (STK52xx, TB5200).
6025 commit 813bea96a960916c72b4a3a7df840151529c26ce
6027 Date: Thu Apr 3 14:43:11 2008 +0200
6029 lwmon5: disable CONFIG_ZERO_BOOTDELAY
6033 commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
6035 Date: Wed Apr 2 08:03:58 2008 +0200
6037 ds174x: Fix warning on return in rtc_get and rtc_set functions
6041 commit a253b38bf50c85227c33ca0febc870ee49d1588e
6043 Date: Wed Apr 2 08:03:57 2008 +0200
6045 cmd_log.c: Fix assignment differ in signedness
6047 In function 'logbuff_init_ptrs':
6048 cmd_log.c:79: warning: pointer targets in assignment differ in signedness
6052 commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
6054 Date: Wed Apr 2 11:04:43 2008 +0530
6056 Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
6060 commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
6062 Date: Tue Apr 1 14:07:10 2008 +0200
6064 s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
6068 commit c08fb3ea36d19b1640b7906264581e9105534399
6070 Date: Tue Apr 15 10:24:14 2008 +0200
6072 Additional PCI IDs for IDE and network controllers
6074 These PCI IDs are required by the Linkstation platforms.
6078 commit c0559be371b2a64b1a817088c3308688e2182f93
6080 Date: Mon Apr 14 23:01:50 2008 +0200
6082 Change env_get_char from a global function ptr to a function.
6084 This avoids an early global data reference.
6088 commit 3e0f331c05d72f140715c1e9fca991927e44d422
6090 Date: Tue Apr 29 12:35:08 2008 +0000
6092 Clean up smsc911x driver
6094 Replace direct register address derefencing with accessor functions.
6095 Restrict explicitly 32-bit bus-width, extend affected configurations
6101 commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
6103 Date: Tue Apr 15 00:08:20 2008 -0400
6105 This patch adds a driver for the following smsc network controllers:
6117 commit 3dfd4aab929cccddb63d9ea509967861e1333b52
6119 Date: Tue Apr 1 15:13:03 2008 +0200
6121 Fix watchdog POST for lwmon5
6123 If the hardware watchdog detects a voltage error, the watchdog sets
6124 GPIO62 to low. The watchdog POST has to detect this low level.
6128 commit 24b448448a917e52806f82660a5c9d47608894fb
6130 Date: Tue Apr 1 15:22:11 2008 +0800
6132 ata: update the libata.h from ata.h of linux kernel
6134 Current libata.h of u-boot is out of sync from linux kernel,
6135 this patch make it be consistent with linux kernel.
6140 commit f8f9dc98883f66f59eb0601da65808e6b139c87c
6142 Date: Mon Mar 31 11:59:27 2008 -0500
6144 Allow use of ARCH=powerpc when building
6146 The linux kernel is now mostly ARCH=powerpc, so to make life easier
6147 allow use to use ARCH=powerpc and convert it to ARCH=ppc.
6151 commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
6153 Date: Mon Mar 31 10:40:54 2008 +0900
6155 Add apollon board MAINTAINERS entry
6159 commit 77e475cc0ed1832160017d364be32a0be9ff02a9
6161 Date: Mon Mar 31 10:40:36 2008 +0900
6165 It should access with 16-bit instead of 8-bit
6167 Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
6171 commit a9da2b41079d230db3a5641625311983f85ce1fb
6173 Date: Mon Mar 31 10:40:19 2008 +0900
6175 Fix OneNAND erase command
6177 It mis-calculates the block address.
6178 Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
6182 commit 61525f2ffa156665a66908fda47dbf29d65ea579
6184 Date: Mon Mar 31 01:32:15 2008 +0200
6186 Support for LinkStation / KuroBox HD and HG PPC models
6188 This patch is based on the port by Mihai Georgian (see linkstation.c for
6189 Copyright information) and implements support for LinkStation / KuroBox HD
6190 and HG PPC models from Buffalo Technology, whereby HD is deactivated at
6191 the moment, pending network driver fixing.
6193 Notice to users: this is pretty much a barebone port. Support for network
6194 on HG models is already in the U-Boot mainline, but you might also want
6195 patches to switch fan / phy modes depending on the negotiated ethernet
6196 parameters. This patch also doesn't support console switching, booting EM
6197 mode, Buffalo specific ext2 magic number. So, if you want to use any of
6198 those, you need additional patches. Otherwise this patche provides a fully
6199 functional u-boot with a network console on your system.
6203 commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
6205 Date: Sun Mar 30 01:22:13 2008 -0500
6207 Add CONFIG_MII_INIT support to related boards
6209 Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
6210 cmd_init.c. Add CONFIG_MII_INIT to board configuration files
6211 that use mii_init() in cmd_init.c.
6216 commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
6218 Date: Sun Mar 30 01:19:06 2008 -0500
6220 Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
6222 Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
6223 CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
6227 commit e99ccb488181d012248c6be30b2093e950319fc5
6229 Date: Thu Mar 27 11:46:38 2008 -0500
6231 Introduce phys_size_t and move phys_addr_t into asm/types.h
6233 Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
6234 that have larger physical addresses like 44x, 85xx, and 86xx.
6238 commit 20a14a42a25f72e379f38460b8a8484667536795
6240 Date: Wed Apr 2 16:19:07 2008 -0500
6242 Rename include/md5.h to include/u-boot/md5.h
6244 Some systems have md5.h installed in /usr/include/. This isn't the
6245 desired file (we want the one in include/md5.h). This will avoid the
6246 conflict. This fixes the host tools building problem by creating a new
6247 directory for U-Boot specific header files.
6249 [Patch by Andy Fleming, modified to use separate directory by Wolfgang
6256 commit f297b7a1ec87433f66320d89d993e1bc738c66b8
6258 Date: Thu Mar 27 18:51:17 2008 +0800
6260 drivers: code clean up
6264 commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
6266 Date: Thu Mar 27 18:50:41 2008 +0800
6268 drivers: clean up the ata_piix.h
6272 commit e8f7ba404f1409606962815ecc955a06984b08b3
6274 Date: Thu Mar 27 18:49:56 2008 +0800
6276 doc: english polishing for README.sata
6278 according to gvb's suggestion, polishing for the doc.
6283 commit 3e3f766a5274d204780460e1879723b565296d34
6285 Date: Wed Mar 26 18:53:28 2008 -0500
6287 Fix warnings introduced by I2C bus speed setting patch
6291 commit 3c735e7437150e8615f26930c7819db85634276d
6293 Date: Thu Mar 27 00:50:49 2008 +0100
6295 Altera Stratix II support
6297 Adds Support for Altera's Stratix II.
6299 Within your board specific init file you will have to call
6301 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
6302 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
6304 Altera_desc* contines (for example):
6306 Altera_StratixII, /* part type */
6307 passive_serial, /* interface type */
6308 1, /* bytes of data part can accept */
6309 (void *)(&funcs), /* interface function table */
6310 0L, /* base interface address */
6311 0 /* implementation specific cookie */
6314 funcs is the interface. It is of type altera_board_specific_func.
6316 altera_board_specific_func func = {
6327 you will have to implement these functions, which is usually bit
6332 commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
6334 Date: Sun Apr 13 14:32:54 2008 -0700
6340 commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
6342 Date: Wed Mar 26 20:41:17 2008 +0100
6344 Phytec Phycore-i.MX31 support
6346 This patch adds support for the Phytec Phycore-i.MX31 board
6351 commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
6353 Date: Wed Mar 26 20:41:09 2008 +0100
6355 mx31 litekit support
6357 This patch adds support for the mx31 litekit board
6362 commit cdace0661208754a53019ea0dc7b803a040e0939
6364 Date: Wed Mar 26 20:40:49 2008 +0100
6366 add an i2c driver for mx31
6368 This patch adds an i2c driver for Freescale i.MX processors
6373 commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
6375 Date: Wed Mar 26 20:40:42 2008 +0100
6377 core support for Freescale mx31
6379 This patch adds the core support for Freescale mx31
6384 commit 7ec68862a27c8f6f6d566228de8f6724d964a939
6386 Date: Sun Apr 13 14:19:23 2008 -0700
6390 ...as suggested by Peter Pearse
6394 commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
6396 Date: Wed Mar 26 20:40:36 2008 +0100
6398 Separate omap24xx specific code from arm1136
6400 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
6401 to cpu/arm1136/omap24xx.
6406 commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
6408 Date: Tue Jan 29 18:21:05 2008 -0500
6410 disable caches before booting an app for Blackfin apps
6412 It isn't generally save to execute applications outside of U-Boot with caches
6413 enabled due to the way the Blackfin processor handles caches (requires
6414 software assistance). This patch disables caches before booting an ELF or
6415 just booting raw code. The previous discussion on the patch was that we
6416 wanted to use weaks instead, but that proved to not be feasible when multiple
6417 symbols are involved, which puts us back at the ifdef solution. I've
6418 minimized the ugliness by moving the setup step outside of the main function.
6422 commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
6424 Date: Sun Apr 13 10:03:54 2008 -0700
6426 ppc: Get rid of unused machine type definitions
6430 commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
6432 Date: Sun Apr 13 09:59:26 2008 -0700
6434 Coding Style cleanup; update CHANGELOG
6438 commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
6440 Date: Thu Feb 21 13:58:11 2008 -0500
6442 LM73 bug fix for negative temperatures and cleanup
6444 When the LM73 temperature sensor measures a temperature below 0 C, the
6445 current driver does not perform sign extension, so the result returned is
6446 512 C too high. This patch fixes the problem, and does general cleanup
6451 commit 96ef831f713289afba19da0c8f905e99da2b23e0
6453 Date: Thu Apr 3 13:36:02 2008 +0200
6455 cfi_flash: Support buffered writes on non-standard Spansion NOR flash
6457 Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
6458 series require different addresses for buffered write commands. Define a
6459 configuration option to support buffered writes on those chips. A more
6460 elegant solution would be to automatically detect those chips by parsing
6461 their CFI records, but that would require introduction of a fixup table
6462 into the cfi_flash driver.
6466 commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
6468 Date: Thu Apr 10 09:35:06 2008 -0500
6470 mpc83xx: Update DIMM data bus width test to support 40-bit width
6472 32-bit wide ECC memory modules report 40-bit width.
6473 Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
6478 commit 5fb5a689d822ca61e814bd523fc930af335242fa
6480 Date: Mon Mar 31 17:05:12 2008 +0800
6482 mpc83xx: Fix the bug of serdes initialization
6484 Currently the serdes will not be initializated due to the
6490 commit 2000784818f043db7ca60e2846a72d097766b894
6492 Date: Thu Apr 3 16:28:29 2008 +0800
6494 mpc83xx: Fix the SATA clock setting of 837x targets
6496 Currently the SATA controller clock is configured as CSB clock,
6497 usually the CSB clock is 400/333/266MHz.
6499 However, The SATA IP block is only guaranteed to operate up to
6500 200 MHz as stated in the HW spec.
6504 This patch makes the SATA clock as half of CSB clock.
6509 commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
6511 Date: Wed Apr 2 13:41:21 2008 +0200
6513 mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
6518 commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
6520 Date: Wed Apr 9 04:20:57 2008 -0500
6522 85xx: Fix detection of MP cpu spin up
6524 We were looking at the wrong memory offset to determine of a secondary
6525 cpu had been spun up or not. Also added a warning message if the
6526 all the secondary cpus we expect don't spin up.
6530 commit f3e04bdc3f360c66801a9048956e61e41a16edba
6532 Date: Tue Apr 8 10:45:50 2008 -0500
6534 85xx: Use SVR_SOC_VER instead of SVR_VER
6536 The recent change introduced by 'Update SVR numbers to expand support'
6537 now requires that we use SVR_SOC_VER instead of SVR_VER if we want
6538 to compare against a particular processor id.
6542 commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
6544 Date: Fri Apr 11 10:00:35 2008 -0400
6546 ppc4xx: Fix power mgt definitions for PPC440
6548 Corrected DCR addresses of PPC440EP power management registers.
6552 commit 950a392464e616b4590bc4501be46e2d7d162dea
6554 Date: Fri Apr 11 15:11:26 2008 +0200
6556 Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
6558 Reverting became necessary after it turned out that the patches in
6559 the u-boot-arm repo were modified, and in some cases corrupted.
6561 This reverts the following commits:
6563 066bebd6353e33af3adefc3404560871699e9961
6564 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
6565 c88ae20580b2b01487b4cdcc8b2a113f551aee36
6566 a147e56f03871bba4f05058d5e04ce7deb010b04
6567 d6674e0e2a6a1f033945f78838566210d3f28c95
6568 8c8463cce44d849e37744749b32d38e1dfb12e50
6569 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
6570 8bf69d81782619187933a605f1a95ee1d069478d
6571 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
6572 a574a73852a527779234e73e17e7597fd8128882
6573 1377b5583a48021d983e1fd565f7d40c89e84d63
6574 1704dc20917b4f71e373e2c888497ee666d40380
6578 commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
6580 Date: Fri Apr 11 07:02:29 2008 +0200
6582 ppc4xx: Update Kilauea defconfig to use device-tree booting as default
6584 This patch reworks the default environment on Kilauea/Haleakala. Now
6585 "net_nfs" for exmaple uses the device-tree style booting formerly know
6586 as "net_nfs_fdt". Also the addresses in RAM were changed because of the
6587 new image booting support, which check for image overwriting. So the
6588 addresses needed togeet adjusted.
6592 commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
6594 Date: Wed Apr 9 11:58:02 2008 +0200
6596 ppc4xx: Fix Canyonlands default environment to work with new image support
6598 Since the new image support checks for image overwriting, the default
6599 environment needs to get adjusted to use correct addresses.
6603 commit dfc6c7b647dba7ab86749616f0e9e5740deed422
6605 Date: Wed Apr 9 11:54:11 2008 +0200
6607 ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
6609 The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
6610 closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
6611 on 4xx systems _start currently cannot be used for this calculation.
6612 So revert back to the original version for now.
6616 commit f91374f65eae8b42cac329e06ba1c54728278efb
6618 Date: Fri Mar 28 12:49:52 2008 +0100
6620 microblaze: Sort microblaze boards in MAKEALL script
6622 commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
6624 Date: Fri Mar 28 11:58:45 2008 +0100
6626 microblaze: clean microblaze_config.mk
6628 FLAGS are generated by U-BOOT generator.
6629 Board specific FLAGS are in board directory
6633 commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
6635 Date: Fri Mar 28 12:47:19 2008 +0100
6637 microblaze: xupv2p fix config file for supporting FDT
6639 commit 188dc16b189143573b1ed90e584bf866d75cdd12
6641 Date: Fri Mar 28 11:53:02 2008 +0100
6643 microblaze: ml401 fix config file for supporting FDT
6647 commit 4c6a6f02e239236261333759997eeaf86b30b54c
6649 Date: Fri Mar 28 11:22:48 2008 +0100
6651 microblaze: ml401 - add ifdef for GPIO
6655 commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
6657 Date: Fri Mar 28 12:13:03 2008 +0100
6659 microblaze: clean uart16550 and uartlite handling
6663 commit 0b20f250877441460fb79d72192954abe8498834
6665 Date: Fri Mar 28 11:08:31 2008 +0100
6667 microblaze: Add Emaclite driver to Makefile
6671 commit 868cde5310f88234b774878e4f06e79df10a88b3
6673 Date: Fri Mar 28 11:08:01 2008 +0100
6675 microblaze: Add Emac driver to Makefile
6679 commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
6681 Date: Fri Mar 28 12:42:29 2008 +0100
6683 microblaze: add Emac ethernet driver
6685 commit 89c53891b18cbafd29ab8931b40e27ad231b6085
6687 Date: Fri Mar 28 12:41:56 2008 +0100
6689 microblaze: add Emaclite ethernet driver
6691 commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
6693 Date: Fri Mar 28 11:04:01 2008 +0100
6695 microblaze: ML401 and XUPV2P remove emac and emaclite reference
6699 commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
6701 Date: Fri Mar 28 10:59:32 2008 +0100
6703 microblaze: remove old setting for emac driver
6707 commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
6709 Date: Fri Mar 28 10:58:15 2008 +0100
6711 microblaze: Clean Makefile from ancient emac driver
6715 commit ab68f921d9c741830f721c3d879c13a0c5597183
6717 Date: Fri Mar 28 10:20:43 2008 +0100
6719 SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
6723 commit 6ed8a43a19bb0275501bc286007daafa923552cf
6725 Date: Wed Mar 26 23:38:48 2008 +0100
6727 SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
6731 commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
6733 Date: Wed Mar 26 23:34:47 2008 +0100
6735 SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
6739 commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
6741 Date: Fri Mar 28 10:06:52 2008 +0100
6743 SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
6747 commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
6749 Date: Wed Mar 26 23:26:48 2008 +0100
6751 SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
6755 commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
6757 Date: Fri Mar 28 10:00:33 2008 +0100
6759 SPARC: Added support for SPARC LEON2 SOC Processor.
6763 commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
6765 Date: Wed Mar 26 23:00:38 2008 +0100
6767 SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
6771 commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
6773 Date: Wed Mar 26 22:51:29 2008 +0100
6775 SPARC: Added support for SPARC LEON3 SOC processor.
6779 commit bf3d8b31169546fcddb4737391e1893fb12d033a
6781 Date: Fri Mar 28 08:29:26 2008 +0100
6783 SPARC: added SPARC support for new uimage in common code.
6787 commit 00ab32c85405a4fe65fd4128243086210fc90a21
6789 Date: Wed Mar 26 22:36:03 2008 +0100
6791 SPARC: added SPARC board information to the command bdinfo.
6795 commit c2f02da21a3f37f0878554eebc785e04fdc4e128
6797 Date: Fri Mar 28 09:47:00 2008 +0100
6799 SPARC: Added generic support for SPARC architecture.
6803 commit e54ec0f016803e4d9524ff71f7971bda0c51b287
6805 Date: Thu Apr 3 14:50:34 2008 +0200
6807 ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
6809 This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
6810 has 2 RGMII instances and we need to configure the 2nd RGMII instance
6811 for the EMAC2+3 channels.
6815 commit c2a545ce33b26d80337f80b533828839249fb1c9
6817 Date: Wed Apr 2 08:03:56 2008 +0200
6819 MPC8xx: Fix libfdt support introduced in commit 77ff7b74
6821 fdt.c: In function 'ft_cpu_setup':
6822 fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
6823 fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
6824 fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
6825 fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
6829 commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
6831 Date: Mon Mar 31 20:45:56 2008 -0500
6833 Fix fdt set command to conform to dts spec
6835 The fdt set command was treating properties specified as <00> and <0011>
6836 as byte streams, rather than as an array of cells. As we already have
6837 syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
6838 we should use the <> syntax to describe arrays of cells, which are always
6839 32-bits per element. If we imagine this likely (IMHO) scenario:
6841 > fdt set /ethernet-phy@1 reg <1>
6843 With the old code, this would create a bad fdt, since the reg cell would be
6844 made to be one byte in length. But the cell must be 4 bytes, so this would
6847 Also, the dts spec calls for constants inside the angle brackets (<>)
6848 to conform to C constant standards as they pertain to base.
6851 > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
6853 The old fdt command would complain that it couldn't parse that. Or, if you
6854 wanted to specify that a certain clock ran at 33 MHz, you'd be required to
6857 > fdt set /mydev clock <1f78a40>
6859 Whereas the new code will accept decimal numbers.
6861 While I was in there, I extended the fdt command parser to handle property
6862 strings which are split across multiple arguments:
6864 > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
6865 > fdt p /ethernet@f00
6867 interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
6870 Lastly, the fdt print code was rearranged slightly to print arrays of cells
6871 if the length of the property is a multiple of 4 bytes, and to not print
6876 commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
6878 Date: Wed Apr 2 08:39:33 2008 +0200
6880 ppc4xx: Canyonlands: Init SATA/PCIe port correctly
6882 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
6883 interface. This usage can be configured with the jumper J6. This patch
6884 correctly configures the SATA/PCIe PHY for SATA usage when this jumper
6889 commit 6fe2946f198481254a6ee9600d7456b8316a4083
6891 Date: Fri Mar 28 17:37:49 2008 -0500
6893 remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
6895 finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
6896 "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
6901 commit b5873f1732b92a25690e1513b90dfb0d644f6697
6903 Date: Tue Apr 1 07:30:51 2008 +0200
6905 dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
6909 commit 2d934ea51f276522b532f870a820e844ff480b5b
6911 Date: Fri Mar 28 15:29:45 2008 +0100
6913 Add Vitesse 8601 support to TSEC driver
6915 Add phy_info for Vitesse VSC8601.
6916 Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
6922 commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
6924 Date: Mon Mar 31 14:25:00 2008 +0000
6926 SPARC: added SMC91111 driver in and out macros for LEON processors.
6928 This patch makes SPARC/LEON processors able to read and write
6929 to the SMC91111 chip using the chip external I/O bus of the memory
6930 controller. This patchs defines the standard in and out macros
6931 expected by the SMC9111 driver.
6933 To access that I/O bus one must set up the memory controller
6934 (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
6935 up this correctly when the other MCTRL parameters are set up. It
6936 can be set up from the board configuration header file.
6941 commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
6943 Date: Wed Mar 26 18:52:34 2008 +0100
6945 Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
6949 commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
6951 Date: Mon Mar 31 21:31:04 2008 +0200
6953 AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
6957 commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
6959 Date: Wed Mar 26 18:52:33 2008 +0100
6961 Add support for AT91SAM9260EK
6963 Support for booting from internal DataFlash, external DataFlash card
6964 or NAND flash is available.
6968 commit 1762f13b4aab88b685b1722f17dada247945624b
6970 Date: Mon Mar 31 21:20:49 2008 +0200
6972 AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
6976 commit 761712188b353494defb2b644491ff73d0daaa6f
6978 Date: Mon Mar 31 21:12:17 2008 +0200
6980 AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
6984 commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
6986 Date: Wed Mar 26 20:52:32 2008 +0100
6988 Port AT91CAP9 to the new headers
6990 Adapt the existing AT91CAP9 code to the new headers and APIs.
6994 commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
6996 Date: Wed Mar 26 19:52:31 2008 +0100
6998 Finish header files reworking
7000 Replace AT91CAP9.h file with several splitted header files coming
7001 from the Linux kernel.
7003 This is part 2 of the replacement: more header imports and edits.
7007 commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
7009 Date: Wed Mar 26 19:52:30 2008 +0100
7011 Import several header files from Linux
7013 Replace AT91CAP9.h file with several splitted header files coming
7014 from the Linux kernel.
7016 This is part 1 of the replacement: pristine header files import.
7020 commit a8a78f2d99dc1bd30dc3595da118539b506c6118
7022 Date: Wed Mar 26 20:52:28 2008 +0100
7024 Move at91cap9 specific files to at91sam9 directory
7026 AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
7027 common infrastructure can be used. Let this infrastructure be
7028 named after the AT91SAM9 family, and move the existing AT91CAP9
7029 files to the new place.
7033 commit 61106a565870ff503f92b251b94bd7afef889a04
7035 Date: Wed Mar 26 21:52:27 2008 +0100
7037 Use timer_init() instead of board supplied interrupt_init()
7039 The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
7040 the board, so use timer_init() instead of interrupt_init().
7044 commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
7046 Date: Wed Mar 26 21:52:36 2008 +0100
7048 Cleanup DataFlash partition handling
7050 DataFlash partition information has become a mess. This patch
7051 defines a single partition scheme for Atmel DataFlashes. This partition
7052 scheme will be used by all AT91CAP9 and AT91SAM9 boards.
7056 commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
7058 Date: Fri Mar 28 08:47:45 2008 -0500
7060 ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
7062 When the version_string function in start.S is not 4-byte align,
7063 it will cause the compiler generates "unaligned opcodes detected
7064 in executable segment". This issue affects all ColdFire CPUs.
7065 By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
7071 commit bae61eefe15b4d454060a7140e49ae58322be803
7073 Date: Tue Mar 25 15:41:15 2008 -0500
7075 ColdFire: Add dspi and serial flash support for MCF5445x
7080 commit 48ead7a7a922fceaf494e352abfab8216a41b417
7082 Date: Tue Mar 18 17:37:01 2008 -0500
7084 ColdFire: Remove R5200 board
7086 This board never went into production
7092 commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
7094 Date: Thu Jan 24 14:02:32 2008 -0600
7096 ColdFire: Added M5275EVB support.
7102 commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
7104 Date: Mon Feb 4 15:38:20 2008 -0600
7106 ColdFire: Added MCF5275 cpu support.
7112 commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
7114 Date: Mon Mar 17 12:14:11 2008 -0500
7116 ColdFire: Define bootdelay in configuration file for M52277EVB
7122 commit 77878f16cedee17161ff2336990970fffc6cea35
7124 Date: Mon Mar 17 12:09:07 2008 -0500
7126 ColdFire: Fix second memory Chipselect for M5475EVB
7131 commit 43d60642395a550956cb21d287c8cfa563913d28
7133 Date: Thu Mar 13 14:26:32 2008 -0500
7135 ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
7140 commit eb14ebe813a0cb5d47905228da446a5ad692473b
7142 Date: Sun Mar 30 20:33:04 2008 -0500
7144 ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
7148 commit 02e3892021112f21067d9ed1d04ae4182725ba52
7150 Date: Mon Mar 31 12:20:48 2008 +0200
7152 ppc4xx: Small whitespace fix of esd patches
7156 commit 034394abb524785047c815f00dde8cdbdc1593c5
7158 Date: Sun Mar 30 18:52:44 2008 +0200
7160 ppc4xx: Cleanup PMC440 board support
7164 commit a6cc6c37188d85c25d167a4515da86f48d9a583e
7166 Date: Sun Mar 30 18:52:06 2008 +0200
7168 ppc4xx: Add ptm configuration variables for PMC440
7170 Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
7171 environment variables.
7173 Cleanup pci_target_init.
7177 commit 7c91f51a2fe296909147f1646a1412729dd10b1d
7179 Date: Sun Mar 30 18:01:15 2008 +0200
7181 ppc4xx: Minor updates for DU440 boards
7185 commit d5bffeb868d6b4d462f558dac43011027b6644b7
7187 Date: Tue Feb 19 00:54:20 2008 -0500
7189 Blackfin: cleanup and overhaul common board init functions
7193 commit b86b3416f874358acaf07519e7620cdb2145f75b
7195 Date: Tue Feb 19 00:50:58 2008 -0500
7197 Blackfin: cleanup lib_blackfin/cache.c
7201 commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
7203 Date: Sun Mar 30 15:46:13 2008 -0400
7205 Blackfin: unify cpu and boot modes
7207 All of the duplicated code for Blackfin processors and boot modes have been
7208 unified. After all, the core is the same for all processors, just the
7209 peripheral set differs (which gets handled in the drivers).
7213 commit 880cc4381ea8360248cddcdf87a64566745a5724
7215 Date: Wed Mar 26 22:52:35 2008 +0100
7217 Fix CFG_NO_FLASH compilation.
7219 Many Atmel boards have no "real" (NOR) flash on board, and rely only
7220 on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
7221 be present in a board configuration file, while still enabling flash
7222 commands like 'flinfo', 'protect', etc.
7226 commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
7228 Date: Tue Feb 19 00:58:13 2008 -0500
7230 Blackfin: BF537-stamp: cleanup spi flash driver
7232 This punts the old spi flash driver for a new/generalized one until the
7233 common one can be integrated.
7237 commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
7239 Date: Sun Mar 30 11:34:34 2008 -0400
7241 Fix macro typo in common/cmd_mii.c
7243 This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
7244 actually applied the wrong patch.
7248 commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
7250 Date: Sun Mar 30 16:39:53 2008 +0200
7252 use correct at91rm9200 register name in m501sk board
7254 This fixes a naming bug for at91rm9200 lowlevel init code:
7255 NOR boot flash is on chipselect 0, not chipselect 2. This
7256 makes code use the register name from chip datasheets.
7260 commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
7262 Date: Fri Jan 18 12:55:00 2008 -0800
7264 use correct at91rm9200 register name
7266 This fixes a naming bug for at91rm9200 lowlevel init code:
7267 NOR boot flash is on chipselect 0, not chipselect 2. This
7268 makes code use the register name from chip datasheets.
7272 commit a3543d6dc52b0ba9c64016687cf32d600b31a476
7274 Date: Fri Jan 18 12:45:45 2008 -0800
7276 add missing ARM boards to MAKEALL
7278 Add some missing ARM boards to MAKEALL. These build correctly,
7279 unlike several of the boards already listed.
7283 commit 066bebd6353e33af3adefc3404560871699e9961
7285 Date: Sun Mar 30 11:34:09 2008 +0100
7287 Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
7288 to prevent compilation error.
7292 commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
7294 Date: Sun Mar 30 11:32:30 2008 +0100
7296 Support for the MX31ADS evaluation board from Freescale
7298 This patch adds support for the MX31ADS evaluation board from Freescale,
7299 initialization code is copied from RedBoot sources, also provided by Freescale.
7303 commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
7305 Date: Sun Mar 30 11:32:27 2008 +0100
7307 Phytec Phycore-i.MX31 support
7309 This patch adds support for the Phytec Phycore-i.MX31 board
7314 commit a147e56f03871bba4f05058d5e04ce7deb010b04
7316 Date: Sun Mar 30 11:32:24 2008 +0100
7318 mx31 litekit support
7320 This patch adds support for the mx31 litekit board
7325 commit d6674e0e2a6a1f033945f78838566210d3f28c95
7327 Date: Sun Mar 30 11:32:21 2008 +0100
7329 add SMSC LAN9x1x Network driver
7331 This patch adds a driver for the following smsc network controllers:
7342 commit 8c8463cce44d849e37744749b32d38e1dfb12e50
7344 Date: Sun Mar 30 11:32:16 2008 +0100
7346 add an i2c driver for mx31
7348 This patch adds an i2c driver for Freescale i.MX processors
7353 commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
7355 Date: Sun Mar 30 11:30:43 2008 +0100
7357 core support for Freescale mx31
7359 This patch adds the core support for Freescale mx31
7364 commit 8bf69d81782619187933a605f1a95ee1d069478d
7366 Date: Sun Mar 30 11:28:46 2008 +0100
7368 Separate omap24xx specific code from arm1136
7370 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
7375 commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
7377 Date: Sun Mar 30 11:23:05 2008 +0100
7379 Add pmdra into MAKEALL
7383 commit a574a73852a527779234e73e17e7597fd8128882
7385 Date: Sun Mar 30 11:21:58 2008 +0100
7387 Adds support for the Prodrive PMDRA board, based on a DM6441
7391 commit 1377b5583a48021d983e1fd565f7d40c89e84d63
7393 Date: Sun Mar 30 11:11:34 2008 +0100
7395 Removes all board specific code from the arch. part for DM644x (DaVinci) boards
7399 commit 1704dc20917b4f71e373e2c888497ee666d40380
7401 Date: Sun Mar 30 11:09:01 2008 +0100
7403 - Remove *_masked() functions as noted by Wolfgang
7404 - Adapt register naming to recent TI spec (sprue26, March 2007)
7405 - Fix reset_timer() handling
7406 - As reported by Pieter [1] the overflow fix introduced a
7407 delay of factor 16 (e.g 2 seconds became 32). While the
7408 overflow fix is basically okay, it missed to divide udelay by
7410 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
7411 - Remove software division of timer count value (DIV(x)
7412 macro) and do it in hardware (TIM_CLK_DIV).
7415 the hints & testing!
7421 commit ac3315c26e143c31680750c9c13f027efbcc887e
7423 Date: Thu Mar 6 16:45:44 2008 +0100
7425 new PHY @ e1000 - 2nd try
7427 Add 82541ER device with latest integrated IGP2 PHY.
7428 Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
7433 commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
7435 Date: Fri Mar 28 20:22:53 2008 +0100
7437 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
7439 GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
7440 a debug link (EDCL). The GRETH core is documented in GRIP.pdf
7441 available at www.gaisler.com.
7443 If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
7444 offloading etc.) can be determined by a bit in the control register.
7445 The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
7450 commit 233a8bcd94997f3f345833a3b82e836222f2a206
7452 Date: Mon Mar 17 17:08:22 2008 -0500
7454 Add CONFIG_MII_INIT in cmd_mii.c
7456 Provide common configuration in do_mii() to execute mii_init()
7457 for all cpu architectures
7462 commit f605479de2deb11e834f31dfdb0af107c86aced6
7464 Date: Mon Mar 17 17:08:16 2008 -0500
7466 ColdFire: Fix FEC transmit issue for MCF5275
7471 commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
7473 Date: Wed Mar 26 09:43:57 2008 +1100
7475 DHCP request fix for Windows Server 2003
7477 Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
7478 delay before sending "DHCP Request" in net/bootp.c. Required to overcome
7479 interoperability problems with Windows Server 200x DHCP server when U-Boot
7480 client responds too fast for server to handle.
7485 commit 97bf85d784fbed485e652eb907589ad0d5cb7262
7487 Date: Fri Mar 28 20:40:19 2008 +0100
7489 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
7491 SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
7492 SPARC CPUs implement flash_read64 which calls __raw_readq.
7494 For current SPARC architectures (LEON2 and LEON3) each read from the
7495 FLASH must lead to a cache miss. This is because FLASH can not be set
7496 non-cacheable since program code resides there, and alternatively disabling
7497 cache is poor from performance view, or doing a cache flush between each
7498 read is even poorer.
7500 Forcing a cache miss on a SPARC is done by a special instruction "lda" -
7501 load alternative space, the alternative space number (ASI) is processor
7502 implementation spcific and can be found by including <asm/processor.h>.
7506 commit 70431e8a7393b6b793f77957f95b999fc9a269b8
7508 Date: Fri Mar 28 15:41:25 2008 +0100
7510 Make MPC83xx one step closer to full relocation.
7512 Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
7513 and use GOT relative reference.
7518 commit 5b2793a3f3de34d439232b05acc8af67a028fd35
7520 Date: Thu Mar 27 14:34:43 2008 -0400
7522 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
7524 This patch fixes eeprom page size so that you can now write more than
7527 It also makes the board take MAC addresses, if found, from EEPROM.
7529 User should place up to 4 addresses at offset 0x7f00, for
7530 eth{,1,2,3}addr. Any unused addresses should be zero. This group of
7531 four six-byte values should have it's CRC at the end. crc32 and
7532 eeprom commands can be used to accomplish this.
7534 If CRC fails, MAC addresses come from the environment. If CRC
7535 succeeds, the environment is overwritten at startup.
7540 commit 8f325cff31f6e745e6540014b131b9a97f61944c
7542 Date: Fri Mar 28 15:15:38 2008 -0400
7544 mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
7546 Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
7547 controller on the PCI bus in Linux on the MPC8323ERDB.
7549 This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
7555 commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
7557 Date: Fri Mar 28 10:19:07 2008 -0500
7559 mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
7561 in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
7562 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
7563 and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
7564 REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
7569 commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
7571 Date: Fri Mar 28 10:18:53 2008 -0500
7573 mpc83xx: display ddr frequency in board_add_ram_info banner
7577 commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
7579 Date: Fri Mar 28 10:18:40 2008 -0500
7581 mpc83xx: unreinvent mem_clk
7583 delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
7584 mem_*_clk for consistency's sake.
7588 commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
7590 Date: Fri Mar 28 14:31:23 2008 -0500
7592 mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
7596 commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
7598 Date: Wed Mar 26 22:57:19 2008 +0800
7600 mpc83xx: enable the SATA interface on mpc837xemds board
7602 Enable the first two SATA interfaces on MPC837xEMDS board,
7603 The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
7608 commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
7610 Date: Wed Mar 26 22:56:36 2008 +0800
7612 mpc83xx: initialize serdes for MPC837xEMDS boards
7614 This patch is stolen from Anton Vorontsov's patch
7615 for mpc837xerdb boards.
7617 The reference clk and xcorevdd voltage of serdes1/2
7618 is same between mpc837xemds and mpc837xerdb.
7620 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
7621 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
7622 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
7627 commit cc8e839abc80887ae832767b5930d40edd6d7eb7
7629 Date: Fri Mar 28 14:09:04 2008 +0100
7631 ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
7633 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
7634 interface. This usage can be configured with the jumper J6. This patch
7635 displays the current configuration upon bootup and changes the PCIe
7636 init loop, to only initialize the availabel PCIe slots.
7640 commit 90447ecbbac8572457b6d8903073ac3f120995ba
7642 Date: Fri Mar 28 11:29:10 2008 +0100
7644 MTD/CFI: Add support for 16bit legacy AMD flash
7646 Add entry for 512Kx16 AMD flash to jedec_table.
7647 Read out 16bit device id if chipwidth is 16bit.
7648 Fixed coding style after Stefans feedback
7652 commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
7654 Date: Fri Mar 28 11:02:53 2008 +0100
7656 ppc: Small change to CFG_MEM_TOP_HIDE description
7660 commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
7662 Date: Thu Mar 27 15:44:12 2008 +0900
7664 sh: Add support stat structure and stat.h
7668 commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
7670 Date: Sat Mar 22 19:27:52 2008 +0100
7672 sh: Removed warning when compiling drivers/serial/serial_sh.c.
7677 commit f309fa38929ffba71230c02330ffa42f4bba6333
7679 Date: Wed Mar 12 18:02:57 2008 +0900
7681 sh: Remove disable_ctrlc function from R7780MP
7685 commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
7687 Date: Wed Mar 12 17:55:15 2008 +0900
7689 sh: Add maintainer of R7780MP to MAINTAINER file
7691 Update MAINTAINER entry for R7780MP. And fix maintainer's name.
7695 commit f5e2466f7baa887a7df0c536333eea8231333497
7697 Date: Tue Mar 25 17:11:24 2008 +0900
7699 sh: Add support Renesas Solutions R2D plus board
7701 R2D plus is SH reference board used with SH7751R.
7702 This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
7703 one PCI bus, VGA, and two Ethernet controller.
7707 commit e92c95180bb5bc5fd4051598a9d60beaba48988d
7709 Date: Wed Mar 12 12:15:29 2008 +0900
7711 sh: Add support SH4 cache control
7713 Add support SH4 cache control and flash_cache function
7717 commit 28e5efde4d925fcb34901d0030d0648de2da7e89
7719 Date: Mon Mar 24 01:53:01 2008 +0900
7721 sh: Add support PCI host driver for SH7751/SH7751R
7725 commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
7727 Date: Mon Mar 24 02:11:26 2008 +0900
7729 sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
7733 commit 566933278101c144d75361ea682678a326c1290d
7735 Date: Wed Mar 12 12:10:28 2008 +0900
7737 sh: Add support SuperH SH7751/SH7751R
7741 commit 3313e0e26224fc9a0c445124f3455058c696df84
7743 Date: Mon Mar 10 11:37:10 2008 +0100
7745 sh: Added support for SH7720 based board MPR2.
7750 commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
7752 Date: Thu Mar 6 14:05:53 2008 +0900
7754 sh: Fix receive FIFO level register of SH4A
7756 Receive FIFO level register is different in SH4A.
7757 Because register is different, cannot occasionally receive data.
7761 commit c133c1fb0b590662206b0eba70f4478ee0300a9a
7763 Date: Tue Mar 11 12:55:12 2008 +0900
7765 sh: Add support Renesas Solutions R7780MP
7767 Renesas Solutions R7780MP is a reference board on SH7780.
7768 This board has serial, 10/100 base Ethernet deivice, CF slot
7769 and VGA devices. This board can set extension board.
7770 Extension board has 10/100/1000 base Ethernet device, PCI slot,
7776 commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
7778 Date: Wed Mar 5 14:30:02 2008 +0900
7780 sh: Add support PCI of SuperH and SH7780
7782 This patch add support PCI of SuperH base code and SH7780 specific code.
7787 commit b55523efff2ae11f0b9ae3cc405893c32eb78156
7789 Date: Wed Mar 5 14:23:26 2008 +0900
7791 sh: Add support SH7780
7793 SH7780 is CPU of Renesas Technology.
7797 - DDR-SDRAM controller
7803 commit c2042f5952a686c414031309b8f244513bf578f0
7805 Date: Fri Jan 25 20:46:36 2008 +0900
7807 sh: Add support Renesas Solutions Migo-R board
7809 Migo-R is a board based on SH7722 and has may devices.
7810 In this patch, supported SCIF, NOR flash and Ethernet.
7815 commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
7817 Date: Thu Mar 27 15:06:40 2008 +0100
7819 Fix host tool build breakage, take two
7821 Revert commit 87c8431f and fix build breakage so that the build continues
7822 to work on FC systems.
7826 commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
7828 Date: Wed Mar 19 09:36:47 2008 +0100
7830 ppc4xx: Enable ECC on LWMON5
7832 Since all ECC related problems seem to be resolved on LWMON5, this patch
7833 now enables ECC support.
7835 We have to write the ECC bytes by zeroing and flushing in smaller
7836 steps, since the whole 256MByte takes too long for the external
7841 commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
7843 Date: Mon Mar 17 11:10:35 2008 -0500
7845 ppc4xx: Updates to Korat-specific code
7847 This patch contains updates for changes for the Korat PPC440EPx board.
7848 These changes include:
7850 (1) Support for "permanent" and "upgradable" copies of U-Boot, as
7851 described in the new "doc/README.korat" file;
7853 (2) a new memory map for the registers in the board's CPLD;
7855 (3) a revised format for manufacturer's data in serial EEPROM; and
7857 (4) changes to track updates to U-Boot for the Sequoia board.
7861 commit f766cdf89b3a2a7634b8c5869f606150e332036c
7863 Date: Thu Mar 27 10:46:25 2008 +0100
7865 ppc4xx: PPC405EP Set EMAC noise filter bits
7867 This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
7868 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
7869 disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
7874 commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
7876 Date: Wed Feb 20 11:54:20 2008 -0500
7878 ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
7880 On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
7881 after startup to change the speed of the clocks. This patch adds the
7882 option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
7883 initialization code will reconfigure the PLL to run the system with a CPU
7884 frequency of 667MHz and PLB frequency of 166MHz, without the need for an
7890 commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
7892 Date: Thu Mar 27 09:12:40 2008 +0100
7894 new-image: Fix host tool build breakage
7898 commit 6fb4b640562a10daff0dbe537638d511b5b48650
7900 Date: Thu Mar 27 10:24:03 2008 +0100
7902 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
7906 commit 9462732a3ec551c11862450902cd8ee1bedea6d9
7908 Date: Wed Mar 19 10:23:43 2008 +0100
7910 ppc4xx: Add fdt support to Prodrive alpr
7912 Since this board will probably be ported to arch/powerpc in the
7913 near future, we add device tree support now. This way we are
7914 "ready" for arch/powerpc from now on.
7918 commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
7920 Date: Mon Mar 17 09:27:56 2008 +0100
7922 ppc4xx: Enable cache support on the ALPR board
7926 commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
7928 Date: Wed Mar 26 10:14:11 2008 +0100
7930 ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
7932 If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
7933 memory area will get subtracted from the top (end) of ram and won't get
7934 "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
7935 should gets passed the now "corrected" memory size and won't touch it
7936 either. This should work for arch/ppc and arch/powerpc. Only Linux board
7937 ports in arch/powerpc with bootwrapper support, which recalculate the
7938 memory size from the SDRAM controller setup, will have to get fixed
7939 in Linux additionally.
7941 This patch enables this config option on some PPC440EPx boards as a workaround
7942 for the CHIP 11 errata. Here the description from the AMCC documentation:
7944 CHIP_11: End of memory range area restricted access.
7948 The 440EPx DDR controller does not acknowledge any
7949 transaction which is determined to be crossing over the
7950 end-of-memory-range boundary, even if the starting address is
7951 within valid memory space. Any such transaction from any PLB4
7952 master will result in a PLB time-out on PLB4 bus.
7955 In case of such misaligned bursts, PLB4 masters will not
7956 retrieve any data at all, just the available data up to the
7957 end of memory, especially the 440 CPU. For example, if a CPU
7958 instruction required an operand located in memory within the
7959 last 7 words of memory, the DCU master would burst read 8
7960 words to update the data cache and cross over the
7961 end-of-memory-range boundary. Such a DCU read would not be
7962 answered by the DDR controller, resulting in a PLB4 time-out
7963 and ultimately in a Machine Check interrupt. The data would
7964 be inaccessible to the CPU.
7967 Forbid any application to access the last 256 bytes of DDR
7968 memory. For example, make your operating system believe that
7969 the last 256 bytes of DDR memory are absent. AMCC has a patch
7970 that does this, available for Linux.
7972 This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
7973 lwmon5, korat, sequoia
7975 The other remaining 440EPx board were intentionally not included
7976 since it is not clear to me, if they use the end of ram for some
7977 other purpose. This is unclear, since these boards have CONFIG_PRAM
7978 defined and even comments like this:
7981 /* esd expects pram at end of physical memory.
7982 * So no logbuffer at the moment.
7985 It is strongly recommended to not use the last 256 bytes on those
7986 boards too. Patches from the board maintainers are welcome.
7990 commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
7992 Date: Thu Mar 27 10:09:05 2008 +0100
7994 ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
7998 commit d56a3ce179688cde61073a3690e21703d68fafd7
8000 Date: Tue Mar 25 17:51:13 2008 +0100
8002 ppc4xx: Correctly pass phyiscal FLASH base address into dtb
8004 The routine ft_board_setup() configures the EBC NOR mappings for the
8005 Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
8006 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
8007 problem, we need to pass the corrected address here too.
8011 commit 9ad31989de12ce5c67b07c4867ead47465655c4b
8013 Date: Wed Mar 19 16:35:12 2008 +0100
8015 ppc4xx: Fix compilation warning in 4xx_enet.c
8019 commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
8021 Date: Wed Mar 19 16:20:49 2008 +0100
8023 ppc4xx: Add AMCC Glacier 406GT eval board support
8025 This patch adds support for the AMCC Glacier 460GT eval board.
8026 The main difference to the Canyonlands board are listed here:
8028 - 4 ethernet ports instead of 2
8032 Currently EMAC2+3 are not working. This will be fixed in a later
8037 commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
8039 Date: Thu Mar 27 08:47:26 2008 +0100
8041 ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
8045 commit b9670dd85be6e0496ef2e231043c23cad9b1d903
8047 Date: Wed Mar 26 21:05:43 2008 +0100
8049 Fix out of tree building issue
8051 Currently U-Boot building in some external directory
8052 doesn't work. This patch tries to fix the problem.
8056 commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
8058 Date: Wed Mar 26 18:13:33 2008 +0100
8060 README: update documentation (availability, links, etc.)
8066 commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
8068 Date: Wed Mar 26 17:47:44 2008 +0100
8070 Fix compilation error in cmd_usb.c
8072 This patch fixes compilation error
8073 cmd_usb.c: In function 'do_usb':
8074 cmd_usb.c:552: error: void value not ignored as it ought to be
8078 commit d8c82db482d6b535d12b419d6440b88bf7091c9b
8080 Date: Fri Mar 14 17:45:29 2008 -0500
8082 Add support for setting the I2C bus speed in fsl_i2c.c
8084 Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
8085 the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
8086 but fsl_i2c.c ignores it and uses conservative value when programming the
8092 commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
8094 Date: Thu Mar 27 00:03:57 2008 +0100
8096 Coding style cleanup, update CHANGELOG
8100 commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
8102 Date: Wed Mar 26 22:55:32 2008 +0800
8104 drivers: add the support for Freescale SATA controller
8106 Add the Freescale on-chip SATA controller driver to u-boot,
8107 The SATA controller is used on the 837x and 8315 targets,
8108 The driver can be used to load kernel, fs and dtb.
8111 - 1.5/3 Gbps link speed
8112 - LBA48, LBA28 support
8113 - DMA and FPDMA support
8118 commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
8120 Date: Wed Mar 26 22:54:44 2008 +0800
8122 ata: add the readme for SATA command line
8126 commit cd54081cd479e542fc399b8a40651ff11a1ad849
8128 Date: Wed Mar 26 22:53:24 2008 +0800
8130 ata: enable the sata initialize on boot up
8134 commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
8136 Date: Wed Mar 26 22:52:36 2008 +0800
8138 ata: add the fis struct for SATA
8142 commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
8144 Date: Wed Mar 26 22:51:44 2008 +0800
8146 ata: add the libata support
8148 add simple libata support in u-boot
8152 commit 8e9bb43429e50df55fa41932cbe65841ff579220
8154 Date: Wed Mar 26 22:50:45 2008 +0800
8156 ata: make the ata_piix driver using new SATA framework
8158 original ata_piix driver is using IDE framework, not real
8159 SATA framework. For now, the ata_piix driver is only used
8160 by x86 sc520_cdp board. This patch makes the ata_piix driver
8161 use the new SATA framework, so
8163 - remove the duplicated command stuff
8164 - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
8165 - add the CONFIG_CMD_SATA define to sc520_cdp.h
8169 commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
8171 Date: Wed Mar 26 22:49:44 2008 +0800
8173 ata: add the support for SATA framework
8175 - add the SATA framework
8176 - add the SATA command line
8180 commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
8182 Date: Wed Mar 26 22:48:18 2008 +0800
8184 ata: merge the header of ata_piix driver
8186 move the sata.h from include/ to drivers/block/ata_piix.h
8190 commit 9eef62804d9695425b24c87b46a61a7fa74afee0
8192 Date: Wed Mar 26 22:47:06 2008 +0800
8194 ata: merge the ata_piix driver
8196 move the cmd_sata.c from common/ to drivers/ata_piix.c,
8197 the cmd_sata.c have some part of ata_piix controller drivers.
8198 consolidate the driver to have better framework.
8202 commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
8204 Date: Wed Mar 26 18:26:43 2008 +0100
8206 USB, Storage: fix a bug introduced in commit
8207 f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
8208 to only print only information on one storage device, but not for
8213 commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
8215 Date: Wed Mar 26 17:47:44 2008 +0100
8217 Fix compilation error in cmd_usb.c
8219 This patch fixes compilation error
8220 cmd_usb.c: In function 'do_usb':
8221 cmd_usb.c:552: error: void value not ignored as it ought to be
8226 commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
8228 Date: Wed Mar 26 08:53:53 2008 -0500
8230 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
8232 Provide a board_lmb_reserve helper function to ensure we reserve
8233 the page of memory we are using for the boot page translation code.
8237 commit 79679d80021ab095e639e250ca472fe526da02e2
8239 Date: Wed Mar 26 08:34:25 2008 -0500
8241 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
8243 The following changes are needed to be inline with ePAPR v0.81:
8245 * r4, r5 and now always set to 0 on boot release
8246 * r7 is used to pass the size of the initial map area (IMA)
8247 * EPAPR_MAGIC value changed for book-e processors
8248 * changes in the spin table layout
8249 * spin table supports a 64-bit physical release address
8253 commit 25eedb2c1958a13110c7de1fc809b624053cc69c
8255 Date: Wed Mar 19 15:02:07 2008 -0500
8257 FSL: Clean up board/freescale/common/Makefile
8259 Each file that can be built here now follows some
8260 CONFIG_ option so that they are appropriately built
8261 or not, as needed. And CONFIG_ defines were added
8262 to various board config files to make sure that happens.
8264 The other board/freescale/*/Makefiles no longer need
8265 to reach up and over into ../common to build their
8266 individually needed files any more.
8268 Boards that are CDS specific were renamed with cds_ prefix.
8272 commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
8274 Date: Wed Feb 27 22:00:27 2008 -0600
8276 85xx: Fix merge duplication
8278 ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
8282 commit 5893b3d0a4084f87a06a5d3dc03db91206818941
8284 Date: Tue Feb 12 16:35:07 2008 -0600
8286 85xx: Expand CCSR space with more DDR controller registers.
8292 commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
8294 Date: Fri Feb 8 18:05:08 2008 -0600
8296 85xx: Speed up get_ddr_freq() and get_bus_freq()
8298 get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
8299 called. However, get_sys_info() recalculates extraneous information when
8300 called each time. Have get_ddr_freq() and get_bus_freq() return memoized
8301 values from global_data instead.
8306 commit e9ea679918fbc9a53fa2f2a904aac874ea736036
8308 Date: Fri Feb 8 16:46:27 2008 -0600
8310 85xx: Show DDR memory data rate in addition to the memory clock frequency.
8312 Show the DDR memory data rate in addition to the memory clock
8313 frequency. For DDR/DDR2 memories the memory data rate is 2x the
8319 commit 591933ca6eabc440e6ed6967233aaf56fce464a3
8321 Date: Fri Feb 8 16:44:53 2008 -0600
8323 85xx: get_tbclk() speed up and rounding fix
8325 Speed up get_tbclk() by referencing pre-computed bus clock
8326 frequency value from global data instead of sys_info_t. Fix
8327 rounding of result to nearest; previously it was rounding
8333 commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
8335 Date: Wed Feb 6 01:19:40 2008 -0600
8337 Update SVR numbers to expand support
8339 FSL has taken to using SVR[16:23] as an SOC sub-version field. This
8340 is used to distinguish certain variants within an SOC family. To
8341 account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
8342 constants to reflect the larger value. We also add SVR numbers for all
8343 of the current variants. Finally, to make things neater, rather than
8344 use an enormous switch statement to print out the CPU type, we create
8345 and array of SVR/name pairs (using a macro), and print out the CPU name
8346 that matches the SVR SOC version.
8350 commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
8352 Date: Wed Feb 6 01:12:57 2008 -0600
8354 Add the Freescale PCI device IDs
8358 commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
8360 Date: Thu Feb 14 11:04:23 2008 -0600
8362 85xx: Added support for multicore boot mechanism
8364 Added the cpu command that provides a generic mechanism to get status,
8365 reset, and release secondary cores in multicore processors.
8367 Added support for using the ePAPR defined spin-table mechanism on 85xx.
8372 commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
8374 Date: Thu Jan 17 16:48:33 2008 -0600
8376 85xx: Added support for multicore boot mechanism
8378 Added the cpu command that provides a generic mechanism to get status,
8379 reset, and release secondary cores in multicore processors.
8381 Added support for using the ePAPR defined spin-table mechanism on 85xx.
8385 commit f69766e4b5d47ecd3aa58677a8da875694f364f2
8387 Date: Wed Jan 30 14:55:14 2008 -0600
8389 85xx: Add the concept of CFG_CCSRBAR_PHYS
8391 When we go to 36-bit physical addresses we need to keep the concept of
8392 the physical CCSRBAR address seperate from the virtual one.
8394 For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
8398 commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
8400 Date: Wed Mar 26 15:38:47 2008 +0100
8402 Coding style cleanup.
8406 commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
8408 Date: Wed Mar 26 13:02:13 2008 +0100
8410 Add CFG_RTC_DS1337_NOOSC to turn off OSC output
8412 The default settings for RTC DS1337 keeps the OSC
8413 output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
8418 commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
8420 Date: Wed Mar 26 11:48:46 2008 +0100
8422 Cleanup coding style, update CHANGELOG
8426 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
8428 Date: Wed Mar 26 10:40:12 2008 +0100
8430 README: update documentation (availability, links, etc.)
8434 commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
8436 Date: Tue Mar 25 12:09:07 2008 +1100
8438 USB Storage, add meaningful return value
8440 This patch changes the "usb storage" command to return success if it
8441 finds a USB storage device, otherwise it returns error.
8445 commit 18e69a35efbb078403db0c0063986470dad7d082
8447 Date: Fri Mar 14 23:20:18 2008 +0300
8449 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
8451 Linux understands "host" (default), "peripheral" and "otg" (broken).
8452 Though, U-Boot doesn't restrict dr_mode variable to these values (think
8453 of renames in future).
8458 commit c7604783b236e368f225efb7b3efb418fe20b404
8460 Date: Fri Mar 14 23:20:30 2008 +0300
8462 tsec: fix link detection for the RTL8211B PHY
8464 RTL8211B sets link state register after autonegotiation complete,
8465 so with bootdelay=0 RTL8211B will report lack of the link.
8467 To fix this, we should wait for aneg to complete, even if the
8468 link is currently down.
8473 commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
8475 Date: Mon Mar 24 20:47:09 2008 +0300
8477 mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
8479 device_type = "soc" is being deprecated, newer device trees will use
8480 "fsl,soc" and/or "fsl,immr" for the soc nodes.
8482 This patch also adds clock-frequency property for soc nodes (the same
8483 value as bus-frequency).
8487 commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
8489 Date: Mon Mar 24 13:00:59 2008 -0400
8491 Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
8493 With the original value of 1/2 clock cycle delay, the system ran relatively
8494 stable except when we run benchmarks that are intensive users of memory.
8495 When I run samba connected disk with a HDBENCH test, the system locks-up
8496 or reboots sporadically.
8500 commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
8502 Date: Mon Mar 24 12:44:13 2008 -0500
8504 mpc83xx: Set PCI I/O bus-address base to zero.
8506 The device trees for these boards describe PCI I/O as starting from
8507 address zero from the device's perspective.
8509 Placing I/O elsewhere may cause problems with certain PCI boards, and may
8510 cause problems with Linux.
8514 commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
8516 Date: Mon Mar 24 20:47:05 2008 +0300
8518 mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
8520 At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
8521 This patch fixes "system time drifting" problem.
8525 commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
8527 Date: Mon Mar 24 20:47:02 2008 +0300
8529 mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
8531 This is needed to update /choosen/linux,stdout-path properly.
8535 commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
8537 Date: Mon Mar 24 20:47:00 2008 +0300
8539 mpc83xx: MPC8360E-RDK: add dhcp command
8541 Plus modify environment to use it and remove bootfile env variable,
8542 it is internal and CONFIG_BOOTFILE is used for these purposes.
8546 commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
8548 Date: Mon Mar 24 20:46:57 2008 +0300
8550 mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
8552 Current DDR setup easily causes memory corruption, this patch fixes it.
8554 Also fix TIMING_CFG0_MRS_CYC definition.
8558 commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
8560 Date: Mon Mar 24 20:46:53 2008 +0300
8562 mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
8564 This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
8565 controller and FHCI (QE USB).
8569 commit 7ad959490962e6842648d87d4bd795ea6cdcce67
8571 Date: Mon Mar 24 20:46:51 2008 +0300
8573 mpc83xx: MPC8360E-RDK: add support for NAND
8577 commit 9a3e832aeb491861d029991241572ebdf4b5b61b
8579 Date: Mon Mar 24 20:46:46 2008 +0300
8581 mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
8583 This is needed for BCM PHYs to work on this board.
8587 commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
8589 Date: Mon Mar 24 20:46:34 2008 +0300
8591 uec: add support for Broadcom BCM5481 Gigabit PHY
8593 This patch adds basic support for Broadcom BCM5481 PHY.
8595 RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
8600 commit 6a600c3a1876bc203445df4f0fd6b12648259666
8602 Date: Mon Mar 24 20:46:28 2008 +0300
8604 uec: add support for RGMII_RXID interface mode
8606 PHY drivers will use it to setup software delay between RXD and RXC
8611 commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
8613 Date: Mon Mar 24 20:46:24 2008 +0300
8615 uec: add support for gbit mii status readings
8619 commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
8621 Date: Mon Mar 24 17:40:47 2008 +0300
8623 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
8625 This is primarily for the early console support.
8629 commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
8631 Date: Mon Mar 24 17:40:43 2008 +0300
8633 83xx: initialize serdes for MPC837XRDB boards
8635 On the MPC8377ERDB: 2 SATA and 2 PCI-E.
8636 On the MPC8378ERDB: 2 PCI-E
8637 On the MPC8379ERDB: 4 SATA
8641 commit 453316a2a19642d8afcbca7452e40a6b44a197b1
8643 Date: Mon Mar 24 17:40:32 2008 +0300
8645 83xx: serdes setup routines
8647 This patch adds few routines to configure serdes on 837x targets.
8651 commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
8653 Date: Mon Mar 24 17:40:27 2008 +0300
8655 83xx: split COBJS onto separate lines
8657 ..plus get rid of some #ifdefs in the .c files.
8661 commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
8663 Date: Mon Mar 24 17:40:23 2008 +0300
8665 83xx: nand support for MPC837XRDB boards
8669 commit 82e45a204190593e8613145a928f998fb8c909c4
8671 Date: Tue Mar 18 21:44:41 2008 -0400
8673 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
8678 commit 0fa7a1b4719e325fce332689fb8754ec166191ff
8680 Date: Thu Mar 20 13:15:39 2008 -0400
8682 mpc8323erdb: remove RTC and add EEPROM
8684 There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
8689 commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
8691 Date: Thu Mar 20 13:15:34 2008 -0400
8693 mpc8323erdb: Improve the system performance
8695 The following changes are based on kernel UCC ethernet performance:
8697 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
8698 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
8699 switch to enable this setting.
8701 The following changes are based on the App Note AN3369 and
8702 verified to improve memory latency using LMbench:
8704 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
8705 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
8707 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
8708 Twr=15ns, and this was already the setting in DDR_MODE)
8709 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
8711 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
8713 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
8715 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
8717 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
8719 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
8725 commit fc549c871f43933396a5b3e21d897023d4b31b8d
8727 Date: Thu Mar 20 13:15:28 2008 -0400
8729 mpc8323erdb: use readable DDR config macros
8731 Use available shift/mask macros to define DDR configuration.
8736 commit 89c7784ed90ba50301eec521144f95111e472906
8738 Date: Fri Feb 8 13:15:55 2008 -0600
8740 83xx: Add Vitesse VSC7385 firmware uploading
8742 Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
8743 the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
8744 Cleaned up the board header files to make selecting the VSC7385 easier to
8750 commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
8752 Date: Fri Feb 8 13:15:54 2008 -0600
8754 NET: Add Vitesse VSC7385 firmware uploading
8756 The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
8757 and other boards. A small firwmare must be uploaded to its on-board memory
8758 before it can be enabled. This patch adds the code which uploads firmware
8759 (but not the firmware itself).
8761 Previously, this feature was provided by a U-Boot application that was
8762 made available only on Freescale BSPs. The VSC7385 firmware must still
8763 be obtained separately, but at least there is no longer a need for a separate
8769 commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
8771 Date: Wed Mar 26 00:52:10 2008 +0100
8773 Coding Style cleanyp; update CHANGELOG
8777 commit 43ddd9c820fec44816188f53346b464e20b3142d
8779 Date: Sat Mar 22 14:23:49 2008 -0400
8781 Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
8783 These defines embedded the u-boot env variables and/or the bd_t structure
8784 in the fdt blob. The conclusion of discussion on the u-boot email list
8785 was that embedding these in the fdt blob is not useful: there are better
8786 ways of passing the data (in fact, the fdt blob itself replaces the
8789 The only board that enables these is the stxxtc and they don't appear
8790 to be used by linux.
8795 commit 22ed2285743359fd1fe73e411dff914b2256e68f
8797 Date: Mon Mar 17 10:49:25 2008 +0100
8799 rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
8803 commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
8805 Date: Mon Mar 17 08:54:06 2008 +0900
8807 Add Flex-OneNAND booting support
8809 Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
8810 using a NOR Flash interface. This on-chip integration enables system designers
8811 to reduce external system logic and use high-density NAND Flash
8812 in applications that would otherwise have to use more NOR components.
8814 Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
8815 in more flexible way. While MLC area of Flex-OneNAND can be used to store data
8816 that require low reliability and high density, SLC area of Flex-OneNAND
8817 to store data that need high reliability and high performance. Flex-OneNAND
8818 can let users take advantage of storing these two different types of data
8819 into one chip, which is making Flex-OneNAND more cost- and space-effective.
8823 commit c512389cc4a10253249271ff6c887c6dab1f0db2
8825 Date: Thu Mar 13 13:50:52 2008 +0100
8827 MPC5200: support setup without FEC
8829 Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
8830 defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
8835 commit aa3511e422946041ef626f80a05ae5e8bfc700e6
8837 Date: Wed Mar 5 18:05:46 2008 -0600
8839 FSL: Move board/mpc8266ads under board/freescale
8843 commit 7f1d846e5c5754449c286587d099d85246062772
8845 Date: Wed Mar 5 18:05:47 2008 -0600
8847 FSL: Move board/mpc7448hpc2 under board/freescale
8851 commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
8853 Date: Wed Mar 5 18:05:45 2008 -0600
8855 FSL: Move board/mpc8260ads under board/freescale
8859 commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
8861 Date: Wed Mar 5 17:08:33 2008 +0900
8863 net: Add support AX88796L ethernet device
8865 AX88796L is device of NE2000 compatible.
8866 This patch support AX88796L ethernet device.
8871 commit e0a6140dd381e1eed1ada2291166ef2616d8822b
8873 Date: Tue Mar 25 22:50:41 2008 +0100
8875 ne2000 driver: change #ifdef to Makefile conditional compilation
8879 commit e710185aae90c64d39c2d453e40e58ceefe4f250
8881 Date: Wed Mar 5 17:08:20 2008 +0900
8883 net: Divided code of NE2000 ethernet driver
8885 There are more devices of the NE2000 base.
8886 A present code is difficult for us to support more devices.
8887 To support more NE2000 clone devices, separated the function.
8892 commit 395bce4f59a507a60a475f7ee46bed47de9482df
8894 Date: Sun Feb 24 23:58:13 2008 -0500
8896 net/Blackfin: move on-chip MAC driver into drivers/net/
8898 The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
8899 directory, but it is not board specific, so relocate it to the drivers dir
8900 so that other Blackfin ports can utilize it.
8904 commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
8906 Date: Sun Feb 24 23:52:35 2008 -0500
8908 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
8910 Since the "ssync" instruction may have hardware anomalies associated with
8911 it, have the smc91111 driver use the SSYNC macro rather than invoking it
8912 directly. We workaround all the anomalies via this macro.
8916 commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
8918 Date: Sun Feb 17 22:57:47 2008 +0000
8920 8xx: Update OF support on 8xx
8922 This patch does some shifting around of OF support on 8xx.
8926 commit 9c666a7db0b2285a270c68810889ce7d5dba304b
8928 Date: Fri Feb 15 15:16:18 2008 -0600
8930 ppc: Allow boards to specify how much memory they can map
8932 For historical reasons we limited the stack to 256M because some boards
8933 could only map that much via BATS. However newer boards are capable of
8934 mapping more memory (for example 85xx is capble of doing up to 2G).
8938 commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
8940 Date: Fri Feb 15 01:05:58 2008 +0000
8942 8xx : Add OF support to Adder875 board port - resubmit
8946 commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
8948 Date: Thu Feb 14 20:44:42 2008 -0600
8952 Add a simple expr style command that will set an env variable as the result
8953 of the command. This allows us to do simple math in shell. The following
8954 operations are supported: &, |, ^, +, -, *, /.
8958 commit 3f105faa64b9826e088711fdfcaa70cb1230397a
8960 Date: Wed Mar 5 17:27:48 2008 -0600
8962 FSL: Move board/mpc7448hpc2 under board/freescale
8966 commit 449c703374a8868453425e15da7e2f76221b72e4
8968 Date: Wed Mar 5 17:21:43 2008 -0600
8970 FSL: Move board/mpc8266ads under board/freescale
8974 commit 5863577989ad689427bb750107e9a75f1c1645d2
8976 Date: Wed Mar 5 16:41:41 2008 -0600
8978 FSL: Move board/mpc8260ads under board/freescale
8982 commit 8a773983957ee6c4aa344469b742f29c7d26afbd
8984 Date: Tue Mar 25 21:30:08 2008 +0900
8986 [MIPS] Move gth2_config from ARM section to MIPS
8990 commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
8992 Date: Tue Mar 25 21:30:07 2008 +0900
8994 [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
8998 commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
9000 Date: Tue Mar 25 21:30:07 2008 +0900
9002 [MIPS] Fix dcache_status()
9004 You can't judge UNCACHED by Config.K0 LSB.
9008 commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
9010 Date: Tue Mar 25 21:30:07 2008 +0900
9012 [MIPS] Introduce _machine_restart
9014 Handles machine specific functions by using weak functions.
9018 commit decaba6f5cf386d569ac3997bebb871b966c6b18
9020 Date: Tue Mar 25 21:30:07 2008 +0900
9022 [MIPS] Cleanup CP0 Status initialization
9024 Add setup_c0_status from Linux. For the moment we disable interrupts, set
9025 CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
9026 reset-time configuration and will work well across most processors.
9030 commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
9032 Date: Tue Mar 25 21:30:07 2008 +0900
9034 [MIPS] Initialize CP0 Cause before setting up CP0 Status register
9036 Without this change, we'll be suffering from deffered WATCH exception
9037 once Status.EXL is cleared. Make sure Cause.WP is cleared.
9041 commit 26138623230ca2bad3c78e05a65527ea70c8b688
9043 Date: Tue Mar 25 21:30:07 2008 +0900
9045 [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
9047 Move things to appropriate place.
9051 commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
9053 Date: Tue Mar 25 21:30:06 2008 +0900
9055 [MIPS] Implement flush_cache()
9057 We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
9058 don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
9059 function is used not only in U-Boot specfic programs but also at loading
9064 commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
9066 Date: Tue Mar 25 21:30:06 2008 +0900
9068 [MIPS] Fix I-/D-cache initialization loops
9070 Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
9071 again per a loop for I-cache initialization. But according to 'See MIPS
9072 Run', we're encouraged to use three separate loops rather than combining
9073 them *for both I- and D-cache*. This patch tries to fix this.
9075 In accordance with fixing above, mips_init_[id]cache are separated from
9076 mips_cache_reset(), and rewrite cache loops are completely rewritten with
9081 commit 1898840797c7f50799377bd5b285a8a93a82c419
9083 Date: Tue Mar 25 21:30:06 2008 +0900
9085 [MIPS] Replace memory clearance code with f_fill64
9087 This routine fills memory with zero by 64 bytes, and is 64-bit capable.
9091 commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
9093 Date: Tue Mar 25 21:30:06 2008 +0900
9095 [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
9097 This patch replaces the current function definitions with NESTED, LEAF
9098 and END macro. They specify some more additional information about the
9099 function; an alignment of symbol, type of symbol, stack frame usage, etc.
9100 These information explicitly tells the assembler and the debugger about
9101 the types of code we want to generate.
9105 commit 282223a607c611425fa33f5428f8eae6636972bb
9107 Date: Tue Mar 25 11:43:17 2008 +0900
9109 [MIPS] asm headers' updates
9111 Make some asm headers adjusted to the latest Linux kernel.
9115 commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
9117 Date: Tue Mar 25 11:39:29 2008 +0900
9119 [MIPS] Request for the 'mips_cache_lock()' removal
9121 The initial intension of having mips_cache_lock() was to use the cache
9122 as memory for temporary stack use so that a C environment can be set up
9123 as early as possible.
9125 But now mips_cache_lock() follow lowlevel_init(). We've already have the
9126 real memory initilaized at this point, therefore we could/should use it.
9127 No reason to lock at all.
9131 Cache locking is not consistent across MIPS implementaions. Some imple-
9132 mentations don't support locking at all. The style of locking varies -
9133 some support per line locking, others per way, etc. Some parts use bits
9134 in status registers instead of cache ops. Current mips_cache_lock() is
9135 not necessarily general-purpose.
9137 And this is worthy of special mention; once U-Boot/MIPS locks the lines,
9138 they are never get unlocked, so the code relies on whatever gets loaded
9139 after U-Boot to re-initialize the cache and clear the locks. We're sup-
9140 posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
9141 but leave the situation as it is for a long time.
9143 For these reasons, I proposed the removal of mips_cache_lock() from the
9144 global start-up code.
9146 This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
9147 *things have changed*. If he wants the same behavior as before, he needs
9148 to have CFG_INIT_RAM_LOCK_MIPS in his config file.
9150 If we don't have any regression report through several releases, then
9151 we'll remove codes entirely.
9156 commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
9158 Date: Mon Mar 24 11:30:54 2008 +0100
9160 lwmon5 SYSMON POST: fix backlight control
9162 If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
9163 run on the board, then the SYSMON POST controls the display backlight
9164 (doesn't switch backlight ON if POST FAILED, and does switch the
9165 backlight ON if PASSED).
9167 If not, then the video driver controls the display backlight (just
9168 switch ON the backlight upon initialization).
9172 commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
9174 Date: Mon Mar 24 11:29:14 2008 +0100
9176 lwmon5 SYSMON POST: fix handling of negative temperatures
9178 Fix errors in the LWMON5 Sysmon POST for negative temperatures.
9182 commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
9184 Date: Fri Mar 7 16:04:25 2008 +0900
9186 pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
9188 In current source code, when the device number of PCI is 0, process PCI
9189 bridge without fail. However, when the device number is 0, it is not PCI
9190 always bridge. There are times when device of PCI allocates.
9192 When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
9198 commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
9200 Date: Fri Mar 21 09:18:40 2008 +0100
9202 LWMON5: fix dsPIC POST
9204 Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
9208 commit 388b82fddc7c05596f3f615f190da0448227dc82
9210 Date: Thu Mar 20 23:23:13 2008 +0100
9212 [new uImage] Enable new uImage support for the pcs440ep board.
9216 commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
9218 Date: Thu Mar 20 23:23:13 2008 +0100
9220 [new uImage] Do not compile new uImage format support by default
9222 Disable default building of new uImage format support in preparation
9223 for merge with the master. Support for new format can be enabled on
9224 a per-board basis, by defining the following in the board's config file:
9226 #define CONFIG_FIT 1
9227 #define CONFIG_OF_LIBFDT 1
9229 This can be optionally defined to give more verbose output:
9231 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
9235 commit dafaede8a46c7159310239e036c93e31c6374487
9237 Date: Thu Mar 20 23:20:31 2008 +0100
9239 [new uImage] Disable debuging output in preparation for merge with master
9243 commit fbe7a155027beacebaee9b32e1ada781fe924bca
9245 Date: Thu Mar 20 19:38:45 2008 +0100
9247 [new uImage] Compilation and new uImage handling fixes for imxtract
9249 Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
9250 include/config_cmd_default.h. Fix few warnings and handling of new format
9255 commit 36cc8cbb3379d5166f882641123521735c469f92
9257 Date: Thu Mar 20 23:10:19 2008 +0100
9259 [new uImage] Fix autoscr command used with new uImage format
9263 commit 43142e817f0597be412e7cbe19413f5532eafa5d
9265 Date: Thu Mar 20 23:10:19 2008 +0100
9267 [new uImage] Fix *.its files location in documentation
9271 commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
9273 Date: Thu Mar 20 22:01:38 2008 +0100
9275 lwmon5 POST: remove unreachable code
9277 plus some coding style cleanup
9281 commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
9283 Date: Thu Mar 20 17:56:04 2008 +0300
9285 LWMON5: POST RTC fix
9287 Modify the RTC API to provide one a status for the time reported by
9288 the rtc_get() function:
9289 0 - a reliable time is guaranteed,
9290 < 0 - a reliable time isn't guaranteed (power fault, clock issues,
9293 The RTC chip drivers are responsible for providing this info if the
9294 corresponding chip supports such functionality. If not - always
9295 report that the time is reliable.
9297 The POST RTC test was modified to detect the RTC faults utilizing
9298 this new rtc_get() feature.
9302 commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
9304 Date: Wed Mar 19 14:25:14 2008 +0100
9306 TQM5200B: update MTD partition layout
9308 - insert partition for dtb blob to TQM5200B MTD layout
9309 - set env variables dependent on the configured board
9310 (TQM5200 or TQM5200B)
9314 commit f0105727d132f56a21fa3ed8b162309cca6cac44
9316 Date: Wed Mar 19 07:09:26 2008 +0100
9318 CFI: Small cleanup for FLASH_SHOW_PROGRESS
9320 With this patch we don't need that many #ifdef's in the code. It moves
9321 the subtraction into the macro and defines a NOP-macro when
9322 CONFIG_FLASH_SHOW_PROGRESS is not defined.
9327 commit 9a042e9ca512beaaa2cb450274313fc477141241
9329 Date: Sat Mar 8 13:48:01 2008 -0500
9331 Flash programming progress countdown.
9335 commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
9337 Date: Wed Mar 19 10:00:06 2008 +0100
9343 commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
9345 Date: Mon Feb 18 18:09:04 2008 +1100
9347 libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
9349 Since fdt_node_offset_by_compatible() was converted to the new
9350 fdt_next_node() iterator, a chunk of initialization code became
9351 redundant, but was not removed by oversight. This patch cleans it up.
9355 commit d0ccb9b140b472039732de102fc14597eedb14df
9357 Date: Mon Feb 18 18:06:31 2008 +1100
9359 libfdt: Trivial cleanup for CHECK_HEADER)
9361 Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
9362 However, there are a handful of functions (fdt_move, rw_check_header,
9363 fdt_open_into) from other files which could also use it (currently
9364 they open-code something more-or-less identical). Therefore, this
9365 patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
9370 commit fe30a354cdbb808b5f15366a935b151a4ccee74f
9372 Date: Wed Feb 20 14:32:36 2008 -0600
9374 Fix fdt boardsetup command parsing
9376 The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
9380 commit 804887e6001e2f00bea11431bf34d6d472512cda
9382 Date: Fri Feb 15 03:34:36 2008 -0600
9384 Add sub-commands to fdt
9386 fdt header - Display header info
9387 fdt bootcpu <id> - Set boot cpuid
9388 fdt memory <addr> <size> - Add/Update memory node
9389 fdt rsvmem print - Show current mem reserves
9390 fdt rsvmem add <addr> <size> - Add a mem reserve
9391 fdt rsvmem delete <index> - Delete a mem reserves
9395 commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
9397 Date: Thu Feb 14 16:50:34 2008 +1100
9399 libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
9401 fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
9402 node which has NOP tags interspersed with its properties. In this
9403 case fdt_add_subnode_namelen() will put the new subnode before the
9404 first NOP tag, even if there are properties after it, which will
9405 result in an invalid blob.
9407 This patch fixes the bug, and adds a testcase for it.
9411 commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
9413 Date: Tue Feb 12 11:58:31 2008 +1100
9415 libfdt: Add and use a node iteration helper function.
9417 This patch adds an fdt_next_node() function which can be used to
9418 iterate through nodes of the tree while keeping track of depth. This
9419 function is used to simplify the iteration code in a lot of other
9420 functions, and is also exported for use by library users.
9424 commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
9426 Date: Fri Jan 11 14:55:05 2008 +1100
9428 libfdt: Add fdt_set_name() function
9430 This patch adds an fdt_set_name() function to libfdt, mirroring
9431 fdt_get_name(). This is a r/w function which alters the name of a
9432 given device tree node.
9436 commit 23e20aa6488e6c0622496549861bfdc74108debe
9438 Date: Tue Mar 18 13:33:30 2008 +0100
9440 lwmon5: Fix register test logic to match the specific GDC h/w.
9445 commit 46bc0a938779aa1d664b847d36b08aa00f22e539
9447 Date: Tue Mar 18 13:27:57 2008 +0100
9449 Fix backlight in the lwmon5 POST.
9451 Backlight was switched on even when temperature was too low.
9456 commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
9458 Date: Wed Feb 6 18:48:36 2008 +0100
9460 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
9462 To enable this, alternative, configuration the U-Boot board configuration
9463 file for lwmon5 includes the definitions of alternative addresses for header
9464 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
9466 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
9467 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
9468 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
9472 commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
9474 Date: Mon Feb 4 17:11:53 2008 +0100
9476 Add support for the lwmon5 board reset via GPIO58.
9481 commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
9483 Date: Mon Feb 4 17:09:55 2008 +0100
9485 Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
9490 commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
9492 Date: Mon Feb 4 14:11:03 2008 +0100
9494 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
9499 commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
9501 Date: Mon Feb 4 14:10:42 2008 +0100
9503 The patch adds new POST tests for the Lwmon5 board. These are:
9505 * External Watchdog test;
9514 commit c2ed33efbfff5767bca236828e021c55fd547b6c
9516 Date: Mon Feb 4 14:10:01 2008 +0100
9518 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
9522 commit 3a5d1e7f1309998791702b2a559e3126781746b9
9524 Date: Tue Mar 18 13:33:30 2008 +0100
9526 lwmon5: Fix register test logic to match the specific GDC h/w.
9531 commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
9533 Date: Tue Mar 18 13:27:57 2008 +0100
9535 Fix backlight in the lwmon5 POST.
9537 Backlight was switcehd on even when temperature was too low.
9542 commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
9544 Date: Wed Feb 6 18:48:36 2008 +0100
9546 The patch introduces the alternative configuration of the log buffer for
9547 the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
9548 the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
9549 PPC440EPX_GPT0_COMP5).
9551 To enable this, alternative, configuration the U-Boot board configuration
9552 file for lwmon5 includes the definitions of alternative addresses for header
9553 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
9555 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
9556 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
9557 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
9561 commit ff818b21b069f4bc9cb73373cc5a16014be101b7
9563 Date: Mon Feb 4 17:11:53 2008 +0100
9565 Add support for the lwmon5 board reset via GPIO58.
9570 commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
9572 Date: Mon Feb 4 17:09:55 2008 +0100
9574 Some fixes to dspic, fpga, and gdc post tests for lwmon5.
9575 Disable external watch-dog for now.
9580 commit e262efe35742c1ad4b0966ff501efc26f34a0aec
9582 Date: Mon Feb 4 14:11:03 2008 +0100
9584 The patch introduces the CRITICAL feature of POST tests. If the test
9585 marked as POST_CRITICAL fails then the alternative, post_critical,
9586 boot-command is used. If this command is not defined then U-Boot
9587 enters into interactive mode.
9592 commit 65b20dcefc89618193fa51947968dada91e4c778
9594 Date: Mon Feb 4 14:10:42 2008 +0100
9596 The patch adds new POST tests for the Lwmon5 board.
9599 * External Watchdog test;
9608 commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
9610 Date: Mon Feb 4 14:10:01 2008 +0100
9612 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
9616 commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
9618 Date: Tue Mar 18 17:35:51 2008 +0100
9620 HMI1001: fix compile problem.
9624 commit 1f2a9970109cebf7446e0503b10b71f8673045ee
9626 Date: Mon Feb 18 05:32:30 2008 -0500
9628 Blackfin: BF537-stamp: drop board-specific flash driver for CFI
9630 The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
9631 for the board specific driver at all. Just use the common CFI driver.
9635 commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
9637 Date: Tue Feb 19 00:36:14 2008 -0500
9639 Blackfin: add proper ELF markings to some assembly functions
9643 commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
9645 Date: Tue Feb 19 00:35:17 2008 -0500
9647 Blackfin: new cplbinfo command for viewing cplb tables
9651 commit aadb72503cd1602349a5fe53356d5f55ecc1b900
9653 Date: Mon Feb 18 05:37:51 2008 -0500
9655 Blackfin: update MAINTAINERS list
9657 Add maintainer information for the Blackfin boards.
9661 commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
9663 Date: Mon Feb 18 05:26:48 2008 -0500
9665 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
9667 Stop tying things to the processor that should be tied to other defines and
9668 change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
9669 system to select the -mcpu option.
9673 commit 86a20fb920bd198105acf7b1191117f566d637ed
9675 Date: Sat Feb 16 07:40:36 2008 -0500
9677 Blackfin: move bootldr command to common code
9679 This moves the Blackfin-common bootldr command out of the BF537-STAMP
9680 specific board directory and into the common directory so that all Blackfin
9681 boards may utilize it.
9685 commit decbe029b2a9d3333d02c433389b1c821eea96d7
9687 Date: Fri Mar 14 11:05:20 2008 +0100
9689 mgcoge: update configuration
9691 Fix configuration for mgcoge board
9695 commit c136724cda0219c49f1d4b346f00da29b14fdf14
9697 Date: Sun Mar 16 01:22:59 2008 +0100
9699 drivers/rtc/Makefile: keep list sorted
9703 commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
9705 Date: Sat Mar 15 15:40:26 2008 +0100
9707 Add support for Intersil isl1208 RTC
9711 commit 0210cff3d079d97b2156b13685ee8de368e68a1a
9713 Date: Sat Mar 15 17:36:41 2008 +0100
9719 commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
9721 Date: Sun Mar 16 01:12:58 2008 +0100
9723 Conding style cleanup
9727 commit 41712b4e8c95dff23354bcd620e1f9477160c190
9729 Date: Wed Mar 5 12:31:53 2008 +0100
9731 ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
9733 This patch adds USB OHCI support to the Canyonlands board port. It also
9734 enables EXT2 support.
9738 commit 2596f5b9d353ff3e4387a3325d05740f16958038
9740 Date: Wed Mar 5 12:29:32 2008 +0100
9742 usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
9744 This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
9745 way a board just needs to define this new option to enable the "force
9746 NoPowerSwitching mode" instead of adding new CPU/architecture defines
9747 to the USB source itself.
9749 This new option will be used first with the new AMCC 460EX Canyonlands
9750 board port, which will be posted in a few days.
9752 This patch also fixes a small compilation problem when DEBUG is enabled.
9756 commit 71665ebf88408ff2acb762af47989fd4365b321a
9758 Date: Mon Mar 3 17:27:02 2008 +0100
9760 ppc4xx: Add Canyonlands NAND booting support
9762 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
9763 NAND devices. The only bootstrap option for NAND booting is option F for
9764 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
9765 EEPROM needs to be programmed accordingly.
9767 This patch adds basic NAND booting support for the AMCC Canyonlands aval
9768 board and also adds support to the "bootstrap" command, to enable NAND
9769 booting I2C setting.
9771 Tested with 512 byte page NAND device (32MByte) on Canyonlands.
9775 commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
9777 Date: Tue Mar 11 16:53:00 2008 +0100
9779 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
9781 This patch adds support for the AMCC Canyonlands 460EX evaluation
9786 commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
9788 Date: Tue Mar 11 16:52:24 2008 +0100
9790 ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
9792 This patch adds support for the AMCC Canyonlands 460EX evaluation
9797 commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
9799 Date: Tue Mar 11 16:51:17 2008 +0100
9801 ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
9803 This patch adds support for the AMCC Canyonlands 460EX evaluation
9808 commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
9810 Date: Tue Mar 11 15:11:43 2008 +0100
9812 ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
9814 This patch adds basic support for the AMCC 460EX/460GT PPC's.
9818 commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
9820 Date: Tue Mar 11 15:11:18 2008 +0100
9822 ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
9824 This patch adds basic support for the AMCC 460EX/460GT PPC's.
9828 commit 999ecd5aca381984d8ebbeb207ece82a1c275577
9830 Date: Tue Mar 11 15:07:10 2008 +0100
9832 ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
9834 This patch adds basic support for the AMCC 460EX/460GT PPC's.
9838 commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
9840 Date: Tue Mar 11 15:05:50 2008 +0100
9842 ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
9844 This patch adds basic support for the AMCC 460EX/460GT PPC's.
9848 commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
9850 Date: Tue Mar 11 15:05:26 2008 +0100
9852 ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
9854 This patch adds basic support for the AMCC 460EX/460GT PPC's.
9858 commit 56e410178375d9f20be25fb24e180974f0ae120b
9860 Date: Tue Feb 19 22:07:57 2008 +0100
9862 ppc4xx: interrupt.c reworked
9864 This patch is a rework of the 4xx interrupt handling done while
9865 adding the 460EX/GT support. Interrupts are needed on 4xx for the
9870 commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
9872 Date: Tue Feb 19 22:01:57 2008 +0100
9874 ppc4xx: program_tlb now uses 64bit physical addess
9876 This patch changes the physical addess parameter from 32bit to 64bit.
9877 This is needed for 36bit 4xx platforms to access areas located
9878 beyond the 4GB border, like SoC peripherals (EBC etc.).
9882 commit c3307fa186af85771924c434997089b8104c0a46
9884 Date: Tue Feb 19 21:58:25 2008 +0100
9886 ppc4xx: miiphy.c reworked
9888 While adding the 460EX/GT support I reworked the 4xx miiphy code. It
9889 badly neede some cleanup.
9893 commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
9895 Date: Tue Feb 19 16:21:49 2008 +0100
9897 rtc: Add M41T62 support
9899 This patch add support for the STM M41T62 RTC. It is used and tested
9900 on the AMCC Canyonlands 406EX platform.
9904 commit 217d383e201adc7f2271145ae345ea5eae2b7170
9906 Date: Mon Feb 25 18:46:43 2008 +0100
9908 ppc4xx: Add 405GPr based MCU25 board specific files
9912 commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
9914 Date: Mon Feb 25 18:46:42 2008 +0100
9916 ppc4xx: Add 405GPr based MCU25 board config file
9920 commit b05f35436b733a240559e77e46bed8439665ecc5
9922 Date: Mon Feb 25 18:46:41 2008 +0100
9924 ppc4xx: Add 405GPr based MCU25 board. Global files
9928 commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
9930 Date: Mon Feb 25 18:37:02 2008 +0100
9932 ppc4xx: HCU4/5. remove obsolete hcu_flash.c
9936 commit a079494853cc2bfeddb26673219db0b4b2b31566
9938 Date: Mon Feb 25 18:37:01 2008 +0100
9940 ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
9942 Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
9943 the FLASH_CFI_LEGACY et al. config options.
9947 commit e4170e5a50c8110f792bc37472833ae669d69951
9949 Date: Tue Mar 11 13:52:25 2008 +0100
9951 ppc4xx: Fix comment in 405EX DDR2 init code
9955 commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
9957 Date: Fri Mar 14 16:22:34 2008 +0100
9959 Add MD5 support to the new uImage format
9963 commit 0ede0c383530a418cf98be9122371a86573cd0db
9965 Date: Fri Mar 14 16:22:34 2008 +0100
9967 Add the MD5 algorithm
9969 MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
9970 calculated using the md5() function -- see include/md5.h for details.
9974 commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
9976 Date: Fri Mar 14 16:04:54 2008 +0100
9978 tools/setlocalversion: use a git-describe-ish format
9980 Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
9981 where 'nnnnn' is the number of commits since the last tag (i.e.,
9982 1.3.2-rc3). This makes it much easier to recognize "newer" versions
9983 and to see how much has been changed since the referenced tag.
9985 Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
9989 commit c6dc21c84de0f159a1752c5ebd33cff843f63609
9991 Date: Thu Mar 13 14:32:03 2008 +0100
9993 HMI1001: add support for MPC5200 Rev. B processors.
9997 commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
9999 Date: Thu Mar 13 14:29:49 2008 +0100
10001 TQM5200: remove dead code
10003 This board never used a MGT5100 processor.
10007 commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
10009 Date: Wed Mar 12 12:14:15 2008 +0100
10011 [new uImage] Fix build issue on ARM
10013 ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
10017 commit 3310c549a73a949430bfda90876df7552a1dab0c
10019 Date: Wed Mar 12 12:13:13 2008 +0100
10021 [new uImage] Add new uImage format documentation and examples
10023 Create doc/uImage.FIT documentation directory with the following files:
10024 - command_syntax_extensions.txt : extended command syntax description
10025 - howto.txt : short usage howto
10026 - source_file_format.txt : internal new uImage format description
10028 Add example image source files:
10033 Update README appropriately.
10038 commit 1ec73761d2e247078f4520a265d463e8b73391a2
10040 Date: Wed Mar 12 10:35:52 2008 +0100
10042 [new uImage] Fix definition of common bootm_headers_t fields
10044 verify, autostart and lmb fields are used regardless of CONFIG_FIT
10045 setting, move their definitions to common section.
10049 commit 1d1cb4270edc6a99276834064069717f9782c491
10051 Date: Wed Mar 12 10:35:51 2008 +0100
10053 [new uImage] Fix build problems on trab board
10057 commit f773bea8e11f4a11c388dcee956b2444203e6b65
10059 Date: Wed Mar 12 10:35:46 2008 +0100
10061 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
10063 Save FIT configuration provied in the first bootm argument and use it
10064 when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
10065 arguments are not specified.
10069 commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
10071 Date: Wed Mar 12 10:33:01 2008 +0100
10073 [new uImage] More verbose kernel image uncompress error message
10077 commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
10079 Date: Wed Mar 12 10:33:01 2008 +0100
10081 [new uImage] Use show_boot_progress() for new uImage format
10083 This patch allocates a set of show_boot_progress() IDs for new uImage format
10084 and adds show_boot_progress() calls in new uImage format handling code.
10088 commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
10090 Date: Wed Mar 12 10:33:01 2008 +0100
10092 [new uImage] Add new uImage fromat support to fpga command
10096 commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
10098 Date: Wed Mar 12 10:33:01 2008 +0100
10100 [new uImage] Add new uImage format handling to other bootm related commands
10104 docboot - cmd_doc.c
10105 fdcboot - cmd_fdc.c
10106 diskboot - cmd_ide.c
10108 scsiboot - cmd_scsi.c
10109 usbboot - cmd_usb.c
10113 commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
10115 Date: Wed Mar 12 10:33:00 2008 +0100
10117 [new uImage] Add new uImage format support to imgextract command
10121 commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
10123 Date: Wed Mar 12 10:33:00 2008 +0100
10125 [new uImage] Add new uImage format support to autoscript routine
10127 autoscript() routine is updated to accept second argument, which
10128 is only used for FIT images and provides a FIT subimage unit name.
10130 autoscript() routine callers must now pass two arguments. For
10131 non-interactive use (like in cmd_load.c, cmd_net.c), new environment
10132 variable 'autoscript_uname' is introduced and used as a FIT
10133 subimage unit name source.
10135 autoscript command accepts extended syntax of the addr argument:
10136 addr:<subimg_uname>
10140 commit cd7c596e9f561dbbc17b717277438aee78cde14f
10142 Date: Wed Mar 12 10:33:00 2008 +0100
10144 [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
10146 This patch updates architecture specific implementations of
10147 do_bootm_linux() adding new uImage format handling for
10148 operations like get kernel entry point address, get kernel
10149 image data start address.
10153 commit 3dfe110149311425919e6d6a14b561b4207498f1
10155 Date: Wed Mar 12 10:32:59 2008 +0100
10157 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
10159 This patch adds new node offset fields to struct bootm_headers
10160 and updates bootm_headers processing code to make use of them.
10161 Saved node offsets allow to avoid repeating fit_image_get_node() calls.
10165 commit bc8ed486b125452ba3bd8344f052f437329150c5
10167 Date: Wed Mar 12 10:32:53 2008 +0100
10169 [new uImage] ppc: Add new uImage format support to FDT handling routines
10171 Support for new (FIT) format uImages is added to powerpc specific
10172 boot_get_fdt() routine which now recognizes, sanity checks FIT image
10173 and is able to access data sections of the requested component image.
10177 commit a44a269a905f924b420020506a4d7d7eedcc0eaf
10179 Date: Wed Mar 12 10:14:57 2008 +0100
10181 [new uImage] Re-enable interrupts for non automatic booting
10183 Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
10184 environment variable is not set to 'yes'.
10188 commit d985c8498c4e47095820da97aa722381d39172c5
10190 Date: Wed Mar 12 10:14:38 2008 +0100
10192 [new uImage] Remove unnecessary arguments passed to ramdisk routines
10194 boot_get_ramdisk() and image_get_ramdisk() do not need all
10195 cmdtp, flag, argc and argv arguments. Simplify routines definition.
10199 commit c87796483bc7c2900470dc747c367f602577608d
10201 Date: Wed Mar 12 10:12:37 2008 +0100
10203 [new uImage] Add new uImage format support for ramdisk handling
10205 This patch updates boot_get_ramdisk() routine adding format
10206 verification and handling for new (FIT) uImages.
10210 commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
10212 Date: Wed Mar 12 10:01:05 2008 +0100
10214 [new uImage] Add new uImage format support for kernel booting
10216 New format uImages are recognized by the bootm command,
10217 validity of specified kernel component image is checked and
10218 its data section located and used for further processing
10219 (uncompress, load, etc.)
10223 commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
10225 Date: Tue Mar 11 12:35:20 2008 +0100
10227 [new uImage] Add new uImage format support for imls and iminfo commands
10229 imls and iminfo can now recognize nad print out contents of the new (FIT)
10234 commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
10236 Date: Tue Mar 11 12:34:47 2008 +0100
10238 [new uImage] Add support for new uImage format to mkimage tool
10240 Support for the new uImage format (FIT) is added to mkimage tool.
10241 Commandline syntax is appropriately extended:
10243 mkimage [-D dtc_options] -f fit-image.its fit-image
10245 mkimage (together with dtc) takes fit-image.its and referenced therein
10246 binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
10247 final image that can be transferred to the target (e.g., via tftp) and then
10248 booted using the bootm command in U-Boot.
10252 commit eb6175edd6c120d8b89678243e5a2be362ee8e40
10254 Date: Mon Mar 10 17:53:49 2008 +0100
10256 [new uImage] Make node unit names const in struct bootm_headers
10260 commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
10262 Date: Fri Feb 29 21:24:06 2008 +0100
10264 [new uImage] New uImage low-level API
10266 Add FDT-based functions for handling new format component images,
10267 configurations, node operations, property get/set, etc.
10269 fit_ - routines handling global new format uImage operations
10270 like get/set top level property, process all nodes, etc.
10271 fit_image_ - routines handling component images subnodes
10272 fit_conf_ - routines handling configurations node
10277 commit 30f1806f60978d707b0cff2d7bf89d141fc24290
10279 Date: Sun Mar 9 16:20:02 2008 +0100
10283 Update CHANGELOG for release.
10287 commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
10289 Date: Sun Mar 9 14:52:11 2008 +0100
10291 SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
10296 commit db695b78515ddb88a2d4f3357c120345efbf59ec
10298 Date: Sun Mar 9 10:44:01 2008 +0100
10300 scb9328: Fix flash warning: type qualifiers ignored on function return type
10304 commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
10306 Date: Sun Mar 9 10:50:41 2008 +0100
10308 esd/common/fpga.c: fix indentation.
10312 commit cc3843e36453e2b8db65d7e56de938ba045016a0
10314 Date: Sun Mar 9 10:33:31 2008 +0100
10316 common/kgdb.c: fix 'dereferencing type-punned pointer' warning
10318 and get rid of a couple of unneeded casts.
10322 commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
10324 Date: Sun Mar 9 10:09:53 2008 +0100
10326 esd/common/fpga.c: fix 'assignment of read-only location' error
10330 commit c6fe4dabac066e8758345d249032768496983a3e
10332 Date: Sun Mar 9 02:13:19 2008 +0100
10334 Makefile: make build silently again.
10338 commit 76babc86576f092573599334c85ec543fdbc6015
10340 Date: Sun Mar 9 02:07:49 2008 +0100
10342 m501sk: Fix out of tree building
10346 commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
10348 Date: Sun Mar 9 00:06:09 2008 +0100
10350 ADS5121: fix out of tree build
10352 and simplify Makefile a bit.
10356 commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
10358 Date: Sat Mar 8 22:35:31 2008 +0100
10364 commit 78a90f827df74520e939c794fc7413dace21c4db
10366 Date: Sat Mar 8 22:35:04 2008 +0100
10372 commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
10374 Date: Sat Mar 8 21:30:04 2008 +0100
10376 esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
10380 commit d75469d48c05795144f4b8ba76addbb4920a7bba
10382 Date: Sat Mar 8 09:25:49 2008 +0900
10384 net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
10386 When rtl_recv() of rtl8169 is called, OWNbit of status register
10387 is not enable occasionally.
10388 rtl_recv() doesn't work normally when the driver doesn't do
10389 appropriate processing.
10390 This patch fix this problem.
10394 commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
10396 Date: Fri Mar 7 08:15:28 2008 +0100
10398 mgsuvd: update board configuration
10400 initialize the UPIOx controller.
10404 commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
10406 Date: Fri Mar 7 08:13:41 2008 +0100
10408 mgcoge: update board configuration
10410 add support for the config Flash.
10411 initialize the UPIOx controller.
10415 commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
10417 Date: Fri Mar 7 12:27:31 2008 -0600
10419 mpc83xx: make dtb basename file references equal those of linux
10421 the dts file basenames were updated in linux - this helps avoid
10422 inadvertently loading any old dtbs laying around.
10426 commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
10428 Date: Wed Feb 27 16:08:22 2008 -0600
10430 net: uec_phy: actually increment the timeout counter
10432 allow u-boot to recover (and, e.g., switch to another interface) in the
10433 case where a PHY does not report autonegotiation is complete within its
10434 two second timeout value.
10438 commit 772003e43957ee0c895abed7cd82cbe72820cbb8
10440 Date: Wed Mar 5 21:38:12 2008 +0100
10442 fix taihu soft spi_read
10444 The taihu board used gpio_read_out_bit which reads the output register and not
10449 commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
10451 Date: Fri Mar 7 08:01:43 2008 +0100
10453 ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
10457 commit bd4458cb47abecabd406b1210457be96c69fc49d
10459 Date: Tue Mar 4 16:59:22 2008 +0800
10461 837xEMDS: Improve the system performance
10463 1. Make the CSB bus pipeline depth as 4, and enable
10465 2. Raise the eTSEC emergency priority;
10466 3. Use the highest IP blocks clock.
10470 commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
10472 Date: Thu Mar 6 16:45:53 2008 +0100
10474 Replace "run load; run update" with conditionalized "run load update".
10476 The latter version stops when "run load" fails for whatever reasons
10477 rendering the combination *a lot* more secure.
10481 commit 6bc113886d7d316df1a4e459bec8baf027518551
10483 Date: Tue Mar 4 17:40:41 2008 +0100
10485 net: Print error message upon net usage when no ethernet-interface is found
10487 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
10488 defined. Then no ethernet interface is available but a simple "tftp"
10489 command will return without any error message which is quite confusing.
10493 commit a30a549a3553032d809e0356306b62de0b125901
10495 Date: Tue Mar 4 10:03:03 2008 -0600
10497 Remove erroneous or extra spd.h #includers.
10499 Many of the spd.h #includers don't need it,
10500 and wanted to have spd_sdram() declared instead.
10501 Since they didn't get that, some also had open
10502 coded extern declarations of it instead or as well.
10503 Fix it all up by using spd_sdram.h where needed.
10507 commit a4475386cef14af3fd88f0518b688e755669486d
10509 Date: Tue Mar 4 17:41:28 2008 +0100
10511 PCS440EP: fix build problems (redundant #define)
10515 commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
10517 Date: Tue Mar 4 17:39:25 2008 +0100
10519 net: Print error message upon net usage when no ethernet-interface is found
10521 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
10522 defined. Then no ethernet interface is available but a simple "tftp"
10523 command will return without any error message which is quite confusing.
10527 commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
10529 Date: Tue Mar 4 17:38:50 2008 +0100
10531 W7OLMC/W7OLMG: fix build problems (redundant #define)
10535 commit f9301e1cda296245ba052d7b08321199c3d0af9d
10537 Date: Tue Mar 4 14:58:31 2008 +0100
10539 Makefile: fix problem with out-of-tree builds introduced by 5013c09f
10541 Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
10542 problem for out-of-tree builds which caused "make clean" to fail.
10546 commit dfece9500556bed5d8244b1c15d973cec7c25bfe
10548 Date: Tue Mar 4 11:58:26 2008 +0100
10550 examples/Makefile: build "hello_world" on 8xx, too.
10554 commit 74eb0222594fd23aafdf168e60e872814eea8b62
10556 Date: Mon Mar 3 15:27:05 2008 -0500
10558 PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
10560 Every now and then a Sequoia board (or equivalent hardware) had
10561 problems connecting to a Gigabit capable network interface.
10563 There were differences in the PHY setup between Linux and U-Boot.
10565 This patch fixes the problem. Apparently "remote fault" is being set,
10566 which signals to some devices (on the other end of the cable) that a
10567 fault has occurred, while other devices ignore it. I believe the RF bit
10568 was causing the issue, but I removed T4 also, to match up with Linux.
10572 commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
10574 Date: Mon Mar 3 09:58:52 2008 -0600
10576 fix QE firmware uploading limit
10578 Fix a typo in qe_upload_firmware() that prevented uploading firmware on
10579 systems with more than one RISC core.
10583 commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
10585 Date: Mon Mar 3 11:57:23 2008 +0000
10587 Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
10590 see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
10592 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
10594 commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
10596 Date: Mon Mar 3 10:39:13 2008 +0200
10598 fix copy from ram to dataflash
10600 If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
10601 routines instead of dataflash. This is because it checks "if source
10602 address is not dataflash" instead of target address.
10606 commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
10608 Date: Mon Mar 3 12:16:44 2008 +0100
10610 Fix quoting problem (preboot setting) in many board config files.
10614 commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
10616 Date: Mon Mar 3 12:36:49 2008 +0100
10618 ADS5121: Fix default environment.
10622 commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
10624 Date: Sun Mar 2 16:12:31 2008 +0100
10626 Makefile: Fix missing unconfig and mkconfig use
10630 commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
10632 Date: Sun Mar 2 23:33:46 2008 +0100
10634 Fix checking fat32 cluster size.
10636 This fixes the cluster size tests in the FAT32 file system.
10637 The current implementation of VFAT support doesn't work if the
10638 referred cluster has an offset > 16bit representation, causing
10639 "fatload" and "fatls" commands etc. to fail.
10643 commit 661bad63a076a96c39c64f136915f146725af92b
10645 Date: Sun Mar 2 22:57:23 2008 +0100
10647 Prepare v1.3.2-rc2 release candidate
10651 commit 76957cb3d621bf664311908e5962e151c633c285
10653 Date: Sat Mar 1 12:11:40 2008 +0100
10655 ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
10657 The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
10658 currently 4k/2k is configured. This patch fixes this issue.
10664 commit 118978c8eb43803e2794233922df4249fa278b83
10666 Date: Fri Feb 29 17:34:35 2008 -0600
10668 Fix alignment error on ARM for modules
10670 Fix alignment fault on ARM when running modules. With out an explicit
10671 linker file gcc4.2.1 will half word align __bss_start's value. The word
10672 dereference will crash hello_world.
10676 commit ce1120dd703e6f12c59e4eba9962356a0300b832
10678 Date: Fri Feb 29 17:45:31 2008 +0800
10680 fs: Fix ext2 read issue
10682 The ext2 aligned process will corrupt the key
10683 data struct, the patch fix this.
10687 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
10689 Date: Sun Mar 2 22:45:33 2008 +0100
10691 Makefile: cleanup "clean" target
10693 Make sure CDPATH settings cannot interfere.
10698 commit ffda586fc1373243c9794babde69500f6293a8d8
10700 Date: Fri Feb 29 11:46:05 2008 +0800
10702 add cscope build target
10704 Add cscope build target to generate cscope database for code browsing.
10708 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
10710 Date: Wed Feb 27 15:06:39 2008 -0600
10712 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
10714 erratum 5.6 states the autoneg completion bit is functional only if the
10715 autoneg bit is asserted.
10717 This fixes any secondarily-issued networking commands on non-gigabit
10718 links on the mpc8360 mds board.
10722 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
10724 Date: Tue Feb 26 09:38:14 2008 -0700
10726 MPC5121e ADS PCI support take 3
10728 Adds PCI support for MPC5121
10730 Tested with drivers/net/rtl8139.c
10732 Support is conditional since PCI on old silicon does not work.
10734 ads5121_PCI_config turns on PCI
10736 In this version, condition compilation of PCI code has been moved
10737 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
10738 suggested by Jean-Christophe PLAGNIOL-VILLARD
10742 commit 44b4dbed4133f657705b7c5193209da9978243a7
10744 Date: Mon Feb 25 23:53:07 2008 +0100
10746 Fix warnings while compilation of post/drivers/memory.c
10748 Fix warnings while compilation with new gcc in eldk-4.2
10752 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
10754 Date: Mon Feb 25 20:54:04 2008 +0100
10756 ppc4xx: Fix problem in 4xx_enet.c driver
10758 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
10759 enabled. To reproduce the problem ensure that 'ethrotate'
10760 environment variable isn't set to "no" and then run
10761 "tftp 200000 not_existent_file".
10762 This patch tries to fix the issue.
10766 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
10768 Date: Mon Feb 25 20:04:20 2008 +0100
10770 POST: Disable cache while SPR POST
10772 Currently (since commit b2e2142c) u-boot crashes on
10773 sequoia board while SPR test if CONFIG_4xx_DCACHE is
10774 enabled. This patch disables the cache while SPR test.
10778 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
10780 Date: Mon Feb 25 17:52:40 2008 +0100
10782 TQM5200: use automatic fdt memory fixup (part 2)
10784 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
10785 TB5200 and TB5200_B to fixup the /memory node with the memory values
10786 detected by U-Boot.
10790 commit 44ceec253ea941b301abf4b079d52324def69d92
10792 Date: Mon Feb 25 15:17:05 2008 +0100
10794 TQM5200: use automatic fdt memory fixup
10796 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
10797 TB5200 and TB5200_B to fixup the /memory node with the memory values
10798 detected by U-Boot.
10802 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
10804 Date: Mon Feb 25 13:27:52 2008 +0100
10806 TQM5200: fix bug in SDRAM initialization code
10808 This patch fixes a bug in the SDRAM initialization code for the
10809 TQM5200. The hi_addr bit is now set correctly. Without this patch
10810 the hi_addr bit is always set to 1, if the second SDRAM bank is
10813 For other MPC5200 boards a correspondig patch has already been applied
10814 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
10818 Forget the first patch please. I confused flash with SDRAM in
10821 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
10823 Date: Mon Feb 25 00:03:12 2008 +0100
10825 mx1fs2/flash: Fix multiple compiler warnings
10827 "pointer targets in assignment differ in signedness"
10831 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
10833 Date: Mon Feb 25 00:03:11 2008 +0100
10835 arm-imx: Fix register definitions
10837 Sync register definitions with linux
10841 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
10843 Date: Mon Feb 25 00:03:10 2008 +0100
10845 actua1/actua2/actua3: Fix multiple unused variable warnings
10848 actux1.c: In function 'checkboard':
10849 actux1.c:92: warning: unused variable 'revision'
10852 actux2.c: In function 'checkboard':
10853 actux2.c:100: warning: unused variable 's'
10854 actux2.c:99: warning: unused variable 'revision'
10855 actux2.c: In function 'reset_phy':
10856 actux2.c:130: warning: unused variable 'i'
10859 actux3.c: In function 'checkboard':
10860 actux3.c:114: warning: unused variable 'revision'
10864 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
10866 Date: Sun Feb 24 11:44:29 2008 +0900
10868 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
10870 The previous patch was lacking of i386, microblaze, nios and nios2. This
10871 patch tries to fix them.
10875 commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
10877 Date: Fri Feb 29 22:22:46 2008 +0100
10879 [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
10881 Do not use global fdt blob pointer, calculate blob size from routine
10882 argument blob pointer.
10886 commit d1cc52879c8966507dad9fb575481e6d3985e64e
10888 Date: Tue Feb 12 00:58:31 2008 +1100
10890 libfdt: Add and use a node iteration helper function.
10892 This patch adds an fdt_next_node() function which can be used to
10893 iterate through nodes of the tree while keeping track of depth. This
10894 function is used to simplify the iteration code in a lot of other
10895 functions, and is also exported for use by library users.
10899 commit 8cf30809a82902a471866d2f07725ce3b8a22291
10901 Date: Fri Feb 29 16:00:24 2008 +0100
10903 [new uImage] Add libfdt support to mkimage
10907 commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
10909 Date: Fri Feb 29 16:00:23 2008 +0100
10911 [new uImage] Add sha1.o object to mkimage binary build
10915 commit df6f1b895c997978f03afe04502ee76b7ba34ab9
10917 Date: Fri Feb 29 16:00:06 2008 +0100
10919 [new uImage] Fix component handling for legacy multi component images
10921 Use uint32_t when accessing size table in image_multi_count() and
10922 image_multi_getimg() for multi component images.
10924 Add missing uimage_to_cpu() endianness conversion.
10928 commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
10930 Date: Fri Feb 29 15:59:59 2008 +0100
10932 [new uImage] Share common uImage code between mkimage and U-boot
10934 This patch adds the following common routines:
10936 1) Dedicated mkimage print_header() is replaced with common
10937 image_print_contents()
10938 image_print_contents_noindent()
10940 2) Common os/arch/type/comp fields name <--> id translation routines
10941 genimg_get_os_name()
10942 genimg_get_arch_name()
10943 genimg_get_type_name()
10944 genimg_get_comp_name()
10946 genimg_get_arch_id()
10947 genimg_get_type_id()
10948 genimg_get_comp_id()
10952 commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
10954 Date: Fri Feb 29 14:58:34 2008 +0100
10956 [new uImage] Update naming convention for bootm/uImage related code
10958 This patch introduces the following prefix convention for the
10959 image format handling and bootm related code:
10961 genimg_ - dual format shared code
10962 image_ - legacy uImage format specific code
10963 fit_ - new uImage format specific code
10964 boot_ - booting process related code
10966 Related routines are renamed and a few pieces of code are moved around and
10971 commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
10973 Date: Wed Feb 27 21:51:51 2008 -0600
10975 [new uImage] Respect autostart setting in linux bootm
10980 commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
10982 Date: Wed Feb 27 21:51:50 2008 -0600
10984 [new uImage] Provide ability to restrict region used for boot images
10986 Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
10987 to restrict what memory range is used for bootm.
10992 commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
10994 Date: Wed Feb 27 21:51:49 2008 -0600
10996 [new uImage] Use lmb for bootm allocations
10998 Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
10999 functions over to using lmb for allocation of the ramdisk, command line
11000 and kernel bd info.
11002 Convert PPC specific fdt_relocate() to use lmb for allocation of the device
11005 Provided a weak function that board code can call to do additional
11006 lmb reserves if needed.
11008 Also introduce the concept of bootmap_base to specify the offset in
11009 physical memory that the bootmap is located at. This is used for
11010 allocations of the cmdline, kernel bd, and device tree as they should
11011 be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
11015 commit f5614e7926863bf0225ec860d9b319741a9c4004
11017 Date: Wed Feb 27 21:51:48 2008 -0600
11019 [new uImage] Add autostart flag to bootm_headers structure
11021 The autostart env variable was dropped as part of the initial new uImage
11022 cleanup. Add it back here so the arch specific code can decide if it
11023 wants to really boot or not.
11028 commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
11030 Date: Wed Feb 27 21:51:47 2008 -0600
11032 [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
11034 Introduce the LMB lib used on PPC in the kernel as a clean way to manage
11035 the memory spaces used by various boot images and structures. This code
11036 will allow us to simplify the code in bootm and its support functions.
11040 commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
11042 Date: Tue Feb 19 22:03:47 2008 -0600
11044 [new uImage] ppc: Allow boards to specify effective amount of memory
11046 For historical reasons we limited the stack to 256M because some boards
11047 could only map that much via BATS. However newer boards are capable of
11048 mapping more memory (for example 85xx is capable of doing up to 2G).
11053 commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
11055 Date: Wed Feb 27 21:51:46 2008 -0600
11057 [new uImage] rework error handling so common functions don't reset
11059 Changed image_get_ramdisk() to just return NULL on error and have
11060 get_ramdisk() propogate that error to the caller. It's left to the
11061 caller to call do_reset() if it wants to.
11063 Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
11064 to a common location. In the future we will change get_fdt() and
11065 fdt_relocate() to return success/failure and not call do_reset() at all.
11070 commit d2bc095a639672def11d5d043b5688d0dbd692ec
11072 Date: Wed Feb 27 21:51:45 2008 -0600
11074 [new uImage] ppc: Re-order ramdisk/fdt handling sequence
11076 Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
11077 however it does mean we have to go in and fixup the initrd info since
11078 we don't know where it will be.
11082 commit 27953493ef025fb698d68c5dee39b36f01f4d530
11084 Date: Wed Feb 27 21:51:44 2008 -0600
11086 [new uImage] ppc: Determine if we are booting an OF style
11088 If we are bootin OF style than we can skip setting up some things
11089 that are used for the old boot method.
11094 commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
11096 Date: Wed Feb 27 21:51:43 2008 -0600
11098 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
11100 We don't actually need the kdb param as we are just using it to get
11101 bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
11102 boot via OF we might not actually fill out a kdb.
11107 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
11109 Date: Wed Feb 27 16:30:47 2008 -0600
11111 85xx: Don't icbi when unlocking the cache
11113 There is no reason to icbi when invalidating the temporary stack in
11114 the d-cache. Its impossible on e500 to have the i-cache contain
11115 any addresses in the temp stack and it can be problematic in generating
11116 transactions on the bus to non-valid addresses.
11120 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
11122 Date: Wed Feb 27 15:50:50 2008 -0600
11124 Fix source for ECM error IVPR
11126 The source vector for the ECM was being set to 2,
11127 but that's what the source vector for DDR was being
11128 set to. Change it to 1.
11132 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
11134 Date: Wed Feb 27 14:29:58 2008 -0600
11136 Invalidate INIT_RAM TLB mappings
11138 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
11139 mappings to be unguarded. This collided with an existing "bug"
11140 where the mappings for the INIT_RAM were being kept around.
11141 This meant that speculative loads to those addresses were
11142 succeeding in the TLB, and going out to the bus, where they
11143 were causing an exception (there's nothing at that address). The
11144 Flash code was coincidentally causing such a speculative load.
11145 Rather than go back to mapping the INIT RAM as guarded, we fix
11146 it so that the entries for the INIT_RAM are invalidated. Thus
11147 the speculative loads will fail in the TLB, and have no effect.
11151 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
11153 Date: Sun Feb 17 22:56:17 2008 +0100
11155 sbc8548: Fix Revision reading and unused variable 'path'
11159 commit 495d162374c472f46454453553382ad0735dc725
11161 Date: Sun Feb 17 22:56:16 2008 +0100
11163 sbc8548: Fix cfi flash bank declaration
11167 commit 4efbe9dbb129f857f27856936112c8c02f016be6
11169 Date: Wed Feb 27 11:02:26 2008 +0100
11171 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
11173 Dual format image code must properly handle all three FDT passing methods:
11174 - raw FDT blob passed
11175 - FDT blob embedded in the legacy uImage
11176 - FDT blob embedded in the new uImage
11178 This patch enables proper raw FDT handling when no FIT imaeg support
11179 is compiled in. This is a bit tricky as we must dected FIT format even
11180 when FIT uImage handling is not enabled as both FIT uImages and raw FDT
11181 blobs use tha same low level format (libfdt).
11185 commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
11187 Date: Wed Feb 27 11:02:26 2008 +0100
11189 [new uImage] POWERPC: Add image_get_fdt() routine
11191 FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
11192 (3) or embedded in the new uImage. For the (2) case embedding image must be
11193 verified before we get FDT from it. This patch factors out legacy image
11194 specific verification routine to the separate helper routine.
11199 commit 1efd43601f90de21ec6c0ebb9880823e822927b1
11201 Date: Wed Feb 27 11:02:07 2008 +0100
11203 [new uImage] Add image_get_kernel() routine
11205 Legacy image specific verification is factored out to a separate helper
11206 routine to keep get_kernel() generic and simple.
11211 commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
11213 Date: Wed Feb 27 11:01:04 2008 +0100
11215 [new uImage] Move image verify flag to bootm_headers structure
11217 Do not pass image verification flag directly to related routines.
11218 Simplify argument passing and move it to the bootm_header structure which
11219 contains curently processed image specific data and is already being passed
11220 on the argument list.
11225 commit 823afe7cefe00dafefc6696c1cc7aa828c394234
11227 Date: Wed Feb 27 11:00:47 2008 +0100
11229 [Makefile] Sort COBJS in lib_<arch> Makefiles
11233 commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
11235 Date: Wed Feb 27 11:00:47 2008 +0100
11237 [new uImage] Optimize gen_get_image() flow control
11239 When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
11240 to do, update its control flow to better reflect that simple case.
11245 commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
11247 Date: Mon Feb 4 08:28:17 2008 +0100
11249 [new uImage] POWERPC: Split get_fdt() into get and relocate routines
11251 PPC specific FDT blob handling code is divided into two separate routines:
11253 get_fdt() - find and verify a FDT blob (either raw or image embedded)
11254 fdt_relocate() - move FDT blob to within BOOTMAP if needed
11259 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
11261 Date: Mon Feb 25 13:13:37 2008 -0600
11263 86xx: Fix renamed GUR symbols in sbc8641d board.
11265 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
11266 (86xx: Fix GUR PCI config registers properly), we should have
11267 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
11268 symbols in the sbc8641d board as well. Fix this oversight.
11272 commit 64cd594e623c39f73964d18787763e4533f791f7
11274 Date: Mon Feb 25 16:50:48 2008 +0100
11276 ppc4xx: Fix acadia_nand build problem
11278 Don't include testdram() on NAND-booting target acadia_nand. This saves
11279 a few bytes and makes the target build clean again.
11283 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
11285 Date: Sun Feb 24 23:03:12 2008 +0000
11287 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
11291 commit 724902c8464e610642b3a170278b99710325888e
11293 Date: Sun Feb 24 23:03:11 2008 +0000
11295 arm-imx: Fix registers definition
11297 Sync registers definition with linux
11301 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
11303 Date: Sun Feb 24 23:03:10 2008 +0000
11305 actua1/actua2/actua3: Fix multipleunused variable
11308 actux1.c: In function 'checkboard':
11309 actux1.c:92: warning: unused variable 'revision'
11312 actux2.c: In function 'checkboard':
11313 actux2.c:100: warning: unused variable 's'
11314 actux2.c:99: warning: unused variable 'revision'
11315 actux2.c: In function 'reset_phy':
11316 actux2.c:130: warning: unused variable 'i'
11319 actux3.c: In function 'checkboard':
11320 actux3.c:114: warning: unused variable 'revision'
11324 commit d5934ad7756f038a393a9cfab76a4fe306d9d930
11326 Date: Mon Feb 4 08:28:09 2008 +0100
11328 [new uImage] Add dual format uImage support framework
11330 This patch adds framework for dual format images. Format detection is added
11331 and the bootm controll flow is updated to include cases for new FIT format
11334 When the legacy (image_header based) format is detected appropriate
11335 legacy specific handling is invoked. For the new (FIT based) format uImages
11336 dual boot framework has a minial support, that will only print out a
11337 corresponding debug messages. Implementation of the FIT specific handling will
11338 be added in following patches.
11342 commit b29661fc1151077776454288051bc9a488351ce8
11344 Date: Sun Feb 24 15:21:36 2008 +0100
11346 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
11350 commit 00b48a48424894daa589d166d73277830b1c6ac4
11352 Date: Sat Feb 23 12:15:56 2008 +0100
11354 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
11358 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
11360 Date: Sat Feb 23 17:24:16 2008 +0900
11362 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
11364 ----------------------------------------------------------------
11365 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
11367 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
11370 GCC can be made to warn about usage of long long types with ISO C90
11371 (-ansi), but only with -pedantic. You can write this in a way that even
11372 then it doesn't cause warnings, namely by:
11375 __extension__ typedef __signed__ long long __s64;
11376 __extension__ typedef unsigned long long __u64;
11379 The __extension__ keyword in front of this switches off any pedantic
11380 warnings for this expression.
11386 ----------------------------------------------------------------
11390 commit 208acd112e6517b21fc30c420396902b103563ac
11392 Date: Sat Feb 23 17:07:57 2008 +0900
11394 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
11396 This will reduce the build time.
11400 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
11402 Date: Sat Feb 23 17:05:00 2008 +0900
11404 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
11406 This will reduce the build time.
11410 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
11412 Date: Sat Feb 23 16:58:41 2008 +0900
11414 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
11416 This reduces the build time by ~10%. Here's the gth2_config example.
11419 real 0m31.441s 0m27.833s
11420 user 0m24.766s 0m23.045s
11421 sys 0m10.425s 0m7.468s
11425 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
11427 Date: Fri Feb 22 10:48:07 2008 -0800
11429 make define2mk.sed work on FreeBSD
11431 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
11432 the define2mk.sed script was identified as the source of the link
11433 failure on FreeBSD. The problem is that sed(1) does not always support
11434 the '+' operator. It isn't on FreeBSD. The attach patch implements the
11435 equivalent, using the '*' operator instead and should work everywhere.
11439 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
11441 Date: Fri Feb 22 17:21:32 2008 +0100
11443 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
11445 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
11446 final traces of long-deprecated "ramdisk" kernel parm") makes these
11447 changes neccessary.
11451 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
11453 Date: Thu Feb 21 13:58:16 2008 -0500
11455 LM75 bug fix for negative temperatures
11457 When the LM75 temperature sensor measures a temperature below 0 C, the
11458 current driver does not perform sign extension, so the result returned is
11459 256 C too high. This patch fixes the problem.
11463 commit 5a910c224b13e413bda41922379add6d75c32da3
11465 Date: Thu Feb 21 18:33:45 2008 +0100
11467 IDS8247: update MAINTAINER entry.
11471 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
11473 Date: Thu Feb 21 18:31:15 2008 +0100
11475 Fix device tree for mgsuvd board.
11477 Rename the "scc" node in "ethernet" for the mgsuvd board.
11481 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
11483 Date: Thu Feb 21 14:23:42 2008 +0100
11485 lwmon5: enable hardware watchdog
11487 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
11488 causing it to reboot the board if U-Boot does a long busy-wait with
11489 udelay(). Thus, for these boards we have to restart WD more
11492 This patch splits the busy-wait udelay() into smaller, predefined,
11493 intervals, so that the watchdog timer may be resetted with the
11494 configurable (CONFIG_WD_PERIOD) interval.
11498 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
11500 Date: Thu Feb 21 12:52:29 2008 +0100
11502 ppc4xx: Support for ATI Radeon 9200 card on sequoia
11504 Adds configuration option for ATI Radeon 9200 card
11505 support to sequoia config file. If CONFIG_VIDEO
11506 is enabled, TEXT_BASE should be changed to 0xFFF80000.
11510 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
11512 Date: Mon Feb 18 08:18:07 2008 -0600
11514 Remove duplicate defines for ARRAY_SIZE
11516 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
11517 the define in common.h.
11521 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
11523 Date: Mon Feb 18 08:09:37 2008 -0600
11525 ppc: Allow boards to specify effective amount of memory
11527 For historical reasons we limited the stack to 256M because some boards
11528 could only map that much via BATS. However newer boards are capable of
11529 mapping more memory (for example 85xx is capable of doing up to 2G).
11533 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
11535 Date: Mon Feb 18 05:24:13 2008 -0500
11537 include autoconf.mk before any other .mk files
11539 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
11540 those .mk files can have make if statements based on the current config.
11544 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
11546 Date: Mon Feb 18 05:10:07 2008 -0500
11548 error check autoconf.mk generation
11550 If any of the steps for generating autoconf.mk fail currently, they go
11551 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
11552 This is simpler and more robust than placing '|| exit $$?' after every line.
11556 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
11558 Date: Mon Feb 18 08:03:51 2008 +0100
11560 Fix bug in dependency checking
11562 By adding VERSION_FILE to the PHONY targets the script
11563 /tools/setlocalversion is always called and version_autogenerated.h
11564 is replaced only if the script find a modified source file.
11568 commit 98ba144ccc912eee90dd42699f023c497ce774c6
11570 Date: Mon Feb 18 14:35:43 2008 +0900
11572 Fix GPMC CS2 memory setup at apollon
11574 It disables the current map first
11578 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
11580 Date: Sun Feb 17 23:52:46 2008 +0100
11582 uli526x: Fix multiple differ in signedness and parentheses around comparison
11586 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
11588 Date: Sun Feb 17 16:58:04 2008 +0100
11590 MIPS: Fix CFG_NO_FLASH support
11592 - Fix flash_init call when CFG_NO_FLASH is used
11593 - Remove no more needed flash.c for qemu-mips
11597 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
11599 Date: Sat Feb 16 02:40:18 2008 -0500
11601 easylogo: clean up some more and add -r (rgb) support
11603 Michael Hennerich added support for outputting an image in RGB format rather
11604 than forcing YUYV all the time. This makes obvious sense if the display you
11605 have takes RGB input rather than YUYV.
11607 Rather than hack in support for options, I've converted it to use getopt and
11608 cleaned up the argument parsing in the process.
11613 commit f65c98129ccada3f7caf97d80395a95b84e911de
11615 Date: Sat Feb 16 02:12:37 2008 -0500
11617 Makefile: add target for $(LDSCRIPT)
11619 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
11620 then change into the board directory and try and create it. This allows you
11621 to generate the linker script on the fly based upon board defines (like the
11622 Blackfin boards do).
11624 There should be no regressions due to this change as the normal case is to
11625 already have a u-boot.lds file. If that's the case, then there's nothing to
11626 generate, and so make will always exit. The fix here is that if the linker
11627 script does not exist, the implicit rules take over and attempt to guess how
11628 to generate the file.
11632 commit 5583cbf736474ef754e128a54fb78632f57b48fd
11634 Date: Thu Feb 21 17:27:49 2008 +0100
11636 [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
11640 commit 2242f5369822bc7780db95c47985bb408ea9157b
11642 Date: Thu Feb 21 17:27:41 2008 +0100
11644 [new uImage] Rename and move print_image_hdr() routine
11648 commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
11650 Date: Thu Feb 21 17:20:20 2008 +0100
11652 [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
11654 Introducing routines for parsing new uImage format bootm arguments:
11655 [<addr>]#<conf> - configuration specification
11656 [<addr>]:<subimg> - subimage specification
11658 New format images can contain multiple subimages of the same type. For example
11659 a single new format image file can contain three kernels, two ramdisks and a
11660 couple of FDT blobs. Subimage and configuration specifications are extensions
11661 to bootm (and other image-related commands) arguments' syntax that allow to
11662 specify which particular subimage should be operated on.
11664 Subimage specification is used to denote a particular subimage. Configurations
11665 are a bit more complex -- they are used to define a particualr booting setup,
11666 for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
11671 commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
11673 Date: Thu Feb 21 17:20:19 2008 +0100
11675 [new uImage] Add gen_get_image() routine
11677 This routine assures that image (whether legacy or FIT) is not
11678 in a special dataflash storage.
11680 If image address is a dataflash address image is moved to system RAM.
11684 commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
11686 Date: Thu Feb 21 17:20:18 2008 +0100
11688 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
11690 New uImage format (Flattened Image Tree) requires libfdt
11691 functionality, print out error message if CONFIG_OF_LIBFDT
11694 New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
11695 This commit turns it on by default.
11699 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
11701 Date: Mon Feb 18 23:16:35 2008 +0100
11703 CFI: Do not use uninitialized cmd_reset
11705 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
11708 From a short test, it looks like AMD-style flash roms treat *any* unknown
11709 command write as a reset, at least when in CFI Query mode, so issuing the
11710 Intel reset command to AMD-style flashs seems safe (from the small sample I
11711 have), plus the 3-cycle magic sequence should kick the state machine into
11712 the right state even without a reset command. Since the AMD-style flashs
11713 require the unlock sequence for real operation, I chose to try the AMD reset
11714 command first, so that Intel flashs do no see an invalid command prior to
11717 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
11718 plus Intel StrataFlash.
11723 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
11725 Date: Thu Feb 21 11:56:44 2008 +0100
11727 API: Add (c) and licensing notice to the public API header.
11731 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
11733 Date: Thu Feb 21 11:06:07 2008 +0100
11735 Fix CPU POST test failure
11737 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
11738 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
11739 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
11740 This patch just saves the CR value before running the test code, so allowing
11741 it to do anything it wants with CR.
11747 commit d5908b093955415f3d340706378b991f911af671
11749 Date: Wed Feb 20 15:26:51 2008 -0600
11751 8610HPCD: Document the flashbank selection switches.
11755 commit a551cee99ad1d1da20fd23ad265de47448852f56
11757 Date: Wed Feb 20 14:22:26 2008 -0600
11759 86xx: Fix GUR PCI config registers properly.
11761 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
11762 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
11763 botched it due to not realizing that 8610 and 8641 had different
11764 Global Utility Register defintions, one of which was like 85xx,
11765 and the other wasn't. Correct this problem by introducing two
11766 symbols, one for each 86xx SoC, but neither of which is named
11767 anything like 85xx.
11769 My bad. Lovely Wednesday with git bisect. You know.
11773 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
11775 Date: Wed Feb 20 12:24:11 2008 -0600
11777 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
11779 Without an actual supported video card hooked up, enabling
11780 the CONFIG_VIDEO by default just makes it look broken by
11781 routing all console output to the video card. Don't.
11785 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
11787 Date: Wed Jan 30 15:08:15 2008 -0600
11789 ColdFire: Fix missing code flash size for M5485EVB
11794 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
11796 Date: Wed Jan 30 15:04:42 2008 -0600
11798 ColdFire: Fix 5282 and 5271 interrupt mask bit
11802 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
11804 Date: Tue Feb 19 12:31:08 2008 -0600
11806 8610HPCD: Fix typos in two PCI setup registers.
11808 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
11809 were erroneously present as 85xx names and values, leftover from
11810 the clone wars. Fix this by removing the 85xx cruft from the
11815 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
11817 Date: Mon Feb 18 14:01:56 2008 -0600
11819 86xx: Convert sbc8641d to use libfdt.
11821 This is the proper fix for a missing closing brace in the function
11822 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
11823 The ft_cpu_setup() function in mpc8641hpcn.c should have been
11824 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
11825 but was missed. Only, the sbc8641d was nominally still using it.
11826 It all got ripped out, and the funcality that was in ft_board_setup()
11827 was refactored to remove the CPU portions into the new file
11828 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
11834 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
11836 Date: Sun Feb 17 23:35:31 2008 +0100
11838 mpc86xx: Fix unused variable 'config' and 'immap'
11840 and remove useless CONFIG_DDR_INTERLEAVE
11844 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
11846 Date: Sun Feb 17 23:03:36 2008 +0100
11848 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
11852 commit b6f29c84c208a091f95a10cbc9852d729659ba20
11854 Date: Sun Feb 17 14:15:31 2008 +0100
11856 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
11860 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
11862 Date: Sun Feb 17 14:15:32 2008 +0100
11864 pxa: fix assignment from incompatible pointer type
11866 fix mmc_bread function prototype
11870 commit 64d792063fff90b8118179b092feee09fe5cae13
11872 Date: Sun Feb 17 14:15:30 2008 +0100
11874 at91cap9adk: fix implicit declaration of function 'eth_init'
11878 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
11880 Date: Sun Feb 17 15:43:44 2008 +0100
11882 Remove files added by mistake, update CHANGELOG.
11886 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
11888 Date: Wed Feb 6 11:10:11 2008 -0500
11890 PPC440EPx: Optionally enable second I2C bus
11892 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
11893 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
11894 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
11899 commit ef5b4f221c22d05770878513951745f236b5b43f
11901 Date: Tue Feb 5 10:26:44 2008 +0100
11903 ppc4xx: HCU4/5. Cleanup configs
11905 - hcu4.h: Removed define of CONFIG_PPC405GPr
11906 - Corrected phy addresses
11907 - Fix boot variables
11908 - Respect line length of 80 chars
11912 commit 74973126d1be63ac75bdc192f46234dca3a7c421
11914 Date: Tue Feb 5 11:31:28 2008 +0100
11916 ppc4xx: HCU4/5. Cleanups
11918 - Fix some coding style violations.
11919 - Use in/out_u16/32 where appropriate.
11920 - Use register names from ppc405.h.
11921 - Fix trace useage for Lauterbach.
11922 - Remove obsolete generation HCU2.
11923 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
11927 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
11929 Date: Tue Feb 5 10:26:41 2008 +0100
11931 ppc4xx: PPC405GPr fix missing register definitions
11935 commit 214398d9cb22268d9d4f7563359edca0f78297a2
11937 Date: Fri Jan 18 21:49:05 2008 -0500
11939 ppc4xx: Beautify configuration files for Sequoia and Korat boards
11943 commit 30c6a241e88499f536e86d325759e29ba00ff67f
11945 Date: Fri Feb 15 20:09:01 2008 +0100
11947 Wipe out assembler warnings while compiling x86 biosemu
11949 This patch tries to get rid of some assembler warnings about
11950 changed .got2 section type while compiling x86 bios emulator
11955 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
11957 Date: Fri Feb 15 00:57:09 2008 +0100
11959 Prepare v1.3.2-rc1 release candidate
11961 commit f33e9653c9c09868995d788511d573771c209fe5
11963 Date: Fri Feb 15 00:13:20 2008 +0100
11965 Fix compile warning on lib_ppc/board.c
11969 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
11971 Date: Thu Feb 14 18:22:04 2008 +0100
11973 Add Radeon Mobility 9200 pci device id to the radeon driver
11975 This patch extends PCI device id table of the
11976 radeon driver so that the driver will also support
11977 Radeon Mobility 9200 (M9+) based boards.
11981 commit 1b8607e1f7143548c6062c28371449ec69588c00
11983 Date: Thu Feb 14 18:19:50 2008 +0100
11985 Extend ATI Radeon driver to support more video modes
11987 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
11988 800x600, 640x480 at 24, 16 and 8 bpp.
11992 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
11994 Date: Sun Feb 10 17:05:20 2008 +0100
11996 xsengine: fix typo and few coding style
12000 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
12002 Date: Fri Feb 8 21:25:58 2008 +0100
12004 Fix wrong memory limit calculation in memory-test
12006 If the length of the memory address range passed to the "mtest" command is
12007 not of the form 2^x - 1, not all address lines are tested. This bug is
12008 inherited from the original software at
12009 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
12014 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
12016 Date: Fri Feb 15 00:11:39 2008 +0100
12018 Coding STyle cleanup.
12022 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
12024 Date: Tue Feb 5 13:30:43 2008 +0900
12026 sh: Fix register address of SH7722
12028 The address of SH7722 is wrong by old document.
12029 This patch fixes this problem.
12033 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
12035 Date: Mon Feb 4 17:44:23 2008 -0500
12037 only update version header as needed
12039 Constantly rebuilding the version header will force useless relinking, so we
12040 simply need to compare the new header with the existing one before updating
12045 commit 208447f8e953f347425eb92c8e28d59e6d911363
12047 Date: Mon Jan 28 05:56:19 2008 -0500
12049 Do not specify a CROSS_COMPILE default when executing size
12053 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
12055 Date: Wed Feb 13 11:19:19 2008 +0100
12057 Fix return value of mtest when CFG_ALT_MEMTEST set
12059 Fix a missing return statement from a non-void function.
12063 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
12065 Date: Wed Jan 9 14:35:26 2008 -0600
12067 85xx, 86xx: Determine I2C clock frequencies and store in global_data
12069 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
12071 Update the get_clocks() function in 85xx and 86xx to determine the I2C
12072 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
12076 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
12078 Date: Thu Feb 14 23:18:01 2008 +0100
12080 TQM834x: clean up configuration
12082 Get board name consistent with Linux and elsewhere;
12083 get rid of local network definitions etc.
12087 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
12089 Date: Thu Feb 14 08:02:12 2008 +0100
12091 TFTP: fix search of ':' in BootFile
12095 commit 0bc9efada170096c6b273f19165e32936d330d80
12097 Date: Thu Feb 14 22:46:55 2008 +0100
12099 Coding style cleanup; update CHANGELOG.
12103 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
12105 Date: Thu Feb 14 22:43:22 2008 +0100
12107 PPC: Use r2 instead of r29 as global data pointer
12109 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
12110 will refuse to use load/store multiple insns; instead, it issues a
12111 list of simple load/store instructions upon function entry and exit,
12112 resulting in bigger code size, which in turn makes the build for a
12119 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
12121 Date: Wed Jan 30 09:08:49 2008 +0100
12123 ARM: make the machid configurable via the environment
12125 If the variable "machid" exists, let do_bootm_linux use that instead
12126 of bd->bi_arch_number.
12130 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
12132 Date: Wed Jan 23 16:34:46 2008 +0200
12134 Use #ifdef CONFIG_FSLDMAFEC
12136 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
12141 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
12143 Date: Sat Jan 19 10:25:59 2008 +0900
12145 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
12147 Current MII_DEBUG is confusing in two ways. One is useless define-then-
12148 undef at the top of the file. The other is there is only one debug() in
12149 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
12150 While there are many useful printf()/puts() debug codes, but they are for
12151 DEBUG, not for MII_DEBUG.
12153 This patch tries to put them all together into MII_DEBUG and debug().
12157 commit 751b9b5189f3274b03c809172631316d6b002c82
12159 Date: Thu Jan 17 16:43:25 2008 +0900
12161 OneNAND Initial Program Loader (IPL) support
12163 This patch enables the OneNAND boot within U-Boot.
12164 Before this work, we used another OneNAND IPL called X-Loader based
12165 on open source. With this work, we can build the oneboot.bin image
12166 without other program.
12168 The build sequence is simple.
12169 First, it compiles the u-boot.bin
12170 Second, it compiles OneNAND IPL
12171 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
12172 The mechanism is similar with NAND boot except it boots from itself.
12174 Another thing is that you can only use the OneNAND IPL only to work
12175 other bootloader such as RedBoot and so on.
12179 commit 21f6f9636f0e978397548751347425fbf8d42bb3
12181 Date: Wed Jan 16 13:06:59 2008 -0600
12183 Fix CONFIG_MMC usage in fat code
12185 A #if statement in fat.c depended on CONFIG_MMC, instead of
12186 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
12187 as "1" rather than just defined. Now it's better.
12191 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
12193 Date: Tue Jan 15 12:52:31 2008 +0100
12195 ppc: Refactor cache routines, so there is only one common set.
12199 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
12201 Date: Wed Jan 23 15:55:02 2008 -0600
12203 86xx: Fix compilation warning in sys_eprom.c
12205 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
12209 commit 65230107025733e89e28fd5e5cfd916d4953c28a
12210 Author: Haavard Skinnemoen <hskinnemoen at>
12211 Date: Fri Feb 22 11:40:50 2008 +0000
12213 Move AT91RM9200DK board support under board/atmel
12215 We already have a vendor subdir for Atmel, so we should use it.
12217 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
12219 commit 6d0943a6be99977d6d853d51749e9963d68eb192
12221 Date: Mon Jan 14 09:06:52 2008 +0000
12223 ARM: cleanup duplicated exception handlingcode
12225 Move duplicated exception handling code into lib_arm.
12229 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
12231 Date: Fri Feb 1 10:09:03 2008 +0000
12233 Support for Artila M-501 starter kit
12235 Kimmo Leppala / Sysart and
12236 Timo Tuunainen / Sysart
12238 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
12240 Date: Mon Feb 11 10:50:19 2008 +0000
12244 ---------------------------------
12246 read_dataflash() takes a signed char pointer as a parameter. Silence a
12247 few warnings dues to incorrect parameter types in env_dataflash.c.
12251 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
12253 Date: Thu Feb 7 09:42:57 2008 +0000
12255 AT91CAP9 support : move board files to Atmel vendor directory.
12257 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
12261 commit 7263ef191b87da94768f762c7093bedeb70db98f
12262 Author: Stelian Pop <stelian at>
12263 Date: Thu Jan 3 21:15:56 2008 +0000
12265 AT91CAP9 support : MACB changes
12267 Signed-off-by: Stelian Pop <stelian <at> popies.net>
12268 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
12270 commit 6afcabf11d7321850f4feaadfee841488ace54c5
12272 Date: Thu Feb 7 16:37:54 2008 +0000
12274 AT91CAP9 support : board/ files
12278 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
12279 Author: Stelian Pop <stelian at>
12280 Date: Wed Jan 30 21:15:54 2008 +0000
12282 AT91CAP9 support : cpu/ files
12284 Signed-off-by: Stelian Pop <stelian <at> popies.net>
12286 commit fa506a926cec348805143576c941f8e61b333cc0
12288 Date: Thu Jan 31 21:15:53 2008 +0000
12290 AT91CAP9 support : include/ files
12294 commit 20b197c6f2799af399a68f96a1aff543a75621b8
12296 Date: Sun Jan 20 19:49:21 2008 +0000
12298 AT91CAP9 support : build integration
12302 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
12304 Date: Sun Jan 20 21:07:00 2008 +0000
12306 Improve DataFlash CS definition.
12308 Use a structure instead of the error prone unnamed array to
12309 define the possible dataflash banks.
12313 commit a6cdd21b56014208706238712a853a9e9a0a2290
12315 Date: Sat Jan 19 21:09:35 2008 +0000
12317 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
12319 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
12321 cpu/arm926ejs/start.o: In function `cpu_init_crit':
12322 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
12326 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
12328 Date: Fri Feb 1 16:50:24 2008 +0000
12330 Fix timer overflow in DaVinci
12333 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
12335 Date: Fri Feb 1 16:49:08 2008 +0000
12337 Update board NetStar
12340 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
12342 Date: Tue Feb 5 10:26:42 2008 +0100
12344 ppc4xx: HCU4/5. Fix make O=../xx
12348 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
12350 Date: Tue Jan 22 08:51:59 2008 -0500
12352 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
12356 commit fe891ecf4d187e9d11dde869ed4623af52b54451
12358 Date: Thu Jan 31 18:35:04 2008 +0900
12360 NFS Timeout with large files.
12362 Retry to send NFS packet before reaching timeout.
12366 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
12368 Date: Tue Jan 29 00:11:25 2008 +0100
12370 Add dependencies to avoid race conditions with parallel make.
12374 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
12376 Date: Mon Jan 28 05:46:01 2008 -0500
12378 Mark board_init_[fr] as noreturn
12382 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
12384 Date: Mon Jan 28 05:28:50 2008 -0500
12386 Only use TEXT_BASE if defined by the board
12390 commit 1b769881750030f10743808b9d6013e11f559350
12392 Date: Fri Jan 25 07:54:47 2008 +0100
12394 Fix remaining CONFIG_COMMANDS
12401 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
12403 Date: Mon Jan 21 16:46:00 2008 +0100
12405 Add *~ to .gitignore
12407 One should never add a backup file ending in with ~ to the git repository.
12411 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
12413 Date: Thu Jan 17 00:02:10 2008 -0600
12415 Remove duplicate defines for ARRAY_SIZE
12419 commit c77ce474b1c57b13e9d36d9830f147966c143694
12421 Date: Mon Jan 14 22:08:14 2008 +0100
12423 Fix incorrect address test in AT91F_DataflashSelect().
12427 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
12429 Date: Wed Feb 13 15:09:58 2008 -0600
12431 Fix building of fdt_support.c if DEBUG set
12435 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
12437 Date: Tue Feb 12 14:53:28 2008 -0600
12439 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
12441 These replace direct structure references for IMMR sections.
12445 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
12447 Date: Tue Feb 12 00:45:06 2008 +0100
12449 Get rid of "#undef DEBUG" from board config files.
12453 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
12455 Date: Tue Jan 15 17:09:41 2008 -0600
12457 Remove #undef DEBUG from MPC83xx board header files
12459 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
12460 The inclusion of this line makes it impossible to enable debug code in
12461 other source files, because "#define DEBUG" typically needs to be defined
12462 before any header files are included.
12466 commit 69018ce2e086e9caf35b914d675b82bc4888f077
12468 Date: Thu Jan 17 08:25:45 2008 -0600
12470 QE: Move FDT support into a common file
12472 Move the flat device tree setup for QE related devices into
12473 a common file shared between 83xx & 85xx platforms that have QE's.
12477 commit 5cf746c303710329f8040d9c62ee354313e3e91f
12479 Date: Thu Jan 31 13:59:09 2008 +0100
12481 [new uImage] Move kernel data find code to get_kernel() routine
12483 Verification of the kernel image (in old format) and finding kernel
12484 data is moved to a dedicated routine. The routine will also hold
12485 support for, to be added, new image format.
12489 commit 7b325454fd231d4273de3fe373850f777fb086bf
12491 Date: Thu Jan 31 13:58:20 2008 +0100
12493 [new uImage] Cleanup FDT handling in PPC do_boot_linux()
12495 Move FDT blob finding and relocation to a dedicated
12496 get_fdt() routine. It increases code readability and
12497 will make adding support for new uImage format easier.
12501 commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
12503 Date: Thu Jan 31 13:58:13 2008 +0100
12505 [new uImage] Cleanup do_botm_linux() boot allocations
12507 This patch moves common pre-boot allocation steps shared between PPC
12508 and M68K to a helper routines:
12511 - get_boot_sp_limit()
12512 - get_boot_cmline()
12516 - set_clocks_in_mhz()
12520 commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
12522 Date: Thu Jan 31 13:57:17 2008 +0100
12524 [new uImage] Move ramdisk loading to a common routine
12526 Ramdisk loading code, including initrd_high variable handling,
12527 was duplicated for PPC and M68K platforms. This patch creates
12528 common helper routine that is being called from both platform
12529 do_bootm_linux() routines.
12533 commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
12535 Date: Thu Jan 31 13:55:53 2008 +0100
12537 [new uImage] Removed dead ramdisk code on microblaze architectures
12539 Microblaze do_bootm_linux() includes ramdisk processing code but
12540 the ramdisk does not get used anywhere later on.
12544 commit 5ad03eb3854c162684222a718b44c0716ea0db03
12546 Date: Thu Jan 31 13:55:39 2008 +0100
12548 [new uImage] Factor out common image_get_ramdisk() routine
12550 Architecture specific do_bootm_linux() routines share common
12551 ramdisk image processing code. Move this code to a common
12556 commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
12558 Date: Thu Jan 31 13:20:08 2008 +0100
12560 [new uImage] Move FDT error printing to common fdt_error() routine
12562 FDT error handling in PPC do_bootm_linux() shares the same message format.
12563 This patch moves error message printing to a helper fdt_error() routine.
12568 commit 42b73e8ee00d48004791dea64b8093fb974c57e1
12570 Date: Thu Jan 31 13:20:07 2008 +0100
12572 [new uImage] Factor out common routines for getting os/arch/type/comp names
12574 Move numeric-id to name translation for image os/arch/type/comp header
12575 fields to a helper routines: image_get_os_name(), image_get_arch_name(),
12576 image_get_type_name(), image_get_comp_name().
12580 commit e99c26694a384221d336f6448c06a57479c0baa4
12582 Date: Thu Jan 31 13:20:07 2008 +0100
12584 [new uImage] Remove standalone applications handling from boootm
12586 Standalone applications are supposed to be run using the "go" command.
12587 This patch removes standalone images handling from the do_bootm().
12591 commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
12593 Date: Thu Jan 31 13:20:07 2008 +0100
12595 [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
12597 Support for OF_FLAT_TREE is to be obsoleted in the near future,
12598 remove related code from the bootm routines.
12602 commit 82850f3d32a2661868ec6876bed7a22c55cef718
12604 Date: Thu Jan 31 13:20:06 2008 +0100
12606 [new uImage] Use image API in SH do_bootm_linux() routine
12608 Introduce image handling API for lately added Hitachi SH architecture.
12612 commit 4a995edec1ac163d9326d143ffe2b47e7543407f
12614 Date: Thu Jan 31 13:20:06 2008 +0100
12616 [new uImage] Rename architecture specific bootm code files
12618 Implementation of the do_bootm_linux() and other bootm helper routines is
12619 architecture specific code. As such it resides in lib_<arch> directories
12620 in files named <arch>_linux.c
12622 This patch renames those files to a more clear and accurate
12623 lib_<arch>/bootm.c form.
12625 List of the renamed files:
12626 lib_arm/armlinux.c -> lib_arm/bootm.c
12627 lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
12628 lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
12629 lib_i386/i386_linux.c -> lib_i386/bootm.c
12630 lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
12631 lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
12632 lib_mips/mips_linux.c -> lib_mips/bootm.c
12633 lib_nios/nios_linux.c -> lib_nios/bootm.c
12634 lib_nios2/nios_linux.c -> lib_nios2/bootm.c
12635 lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
12636 lib_sh/sh_linux.c -> lib_sh/bootm.c
12640 commit 7582438c285bf0cef82909d0f232de64ec567a8a
12642 Date: Thu Jan 31 13:20:06 2008 +0100
12644 [new uImage] Return error on image move/uncompress overwrites
12646 Check for overwrites during image move/uncompress, return with error
12647 when the original image gets corrupted. Report clear message to the user
12648 and prevent further troubles when pointer to the corrupted images is passed
12649 to do_bootm_linux routine.
12653 commit f13e7b2e993c61fed1f607962501e051940d6e80
12655 Date: Tue Jan 8 18:12:17 2008 +0100
12657 [new uImage] Cleanup image header pointer use in bootm code
12659 - use single image header pointer instead of a set of auxilliary variables.
12660 - add multi component image helper routines: get component size/data address
12664 commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
12666 Date: Tue Jan 8 18:17:10 2008 +0100
12668 [new uImage] Cleanup cmd_bootm.c
12670 - sort and cleanup headers, declarations, etc.
12671 - group related routines
12672 - cleanup indentation, white spaces
12676 commit af13cdbc01eaf88880978bfb4f603e012818ba24
12678 Date: Tue Jan 8 18:11:45 2008 +0100
12680 [new uImage] Add memmove_wd() common routine
12682 Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
12686 commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
12688 Date: Tue Jan 8 18:11:44 2008 +0100
12690 [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
12694 commit 15158971f49255ccef54f0979a942cfd3de2ae52
12696 Date: Tue Jan 8 18:11:44 2008 +0100
12698 [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
12700 Use image header copy instead of a (possibly corrupted) pointer to
12701 a initial image location.
12705 commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
12707 Date: Tue Jan 8 18:11:44 2008 +0100
12709 [new uImage] Remove I386 uImage fake_header() routine
12711 I386 targets are not using a uImage format, instead fake header
12712 is added to ram image before it is further processed by bootm.
12714 Remove this fixup and force proper uImage use for I386.
12718 commit 559316faf7eae0614c91d77f509b57d6c4c091ba
12720 Date: Tue Jan 8 18:11:44 2008 +0100
12722 [new uImage] Move CHUNKSZ definition to image.h
12724 CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
12725 move this definition to a common header.
12729 commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
12731 Date: Tue Jan 8 18:11:43 2008 +0100
12733 [new uImage] Move gunzip() common code to common/gunzip.c
12735 Move gunzip(), zalloc() and zfree() to a separate file.
12736 Share zalloc() and zfree() with cramfs uncompress routine.
12740 commit d45d5a18b6b36688f2365623f9d550566c664b5b
12742 Date: Tue Jan 8 18:11:43 2008 +0100
12744 [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
12746 Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
12747 readable in PPC variant of do_bootm_linux() routine.
12751 commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
12753 Date: Tue Jan 8 18:11:43 2008 +0100
12755 [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
12757 PPC implementation of do_bootm_linux() routine is moved to
12758 a dedicated file lib_ppc/ppc_linux.c
12762 commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
12764 Date: Tue Jan 8 18:14:09 2008 +0100
12766 [new uImage] Define a API for image handling operations
12768 - Add inline helper macros for basic header processing
12769 - Move common non inline code common/image.c
12770 - Replace direct header access with the API routines
12771 - Rename IH_CPU_* to IH_ARCH_*
12775 commit ed29bc4e8142b46b626f67524207b36e43d9aad6
12777 Date: Thu Jan 31 13:19:58 2008 +0100
12779 Add missing cmd_ximg.o to common/Makefile
12783 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
12785 Date: Mon Jan 28 10:15:02 2008 +0100
12787 ADS5121e: DDR2 init/timing update.
12792 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
12794 Date: Wed Jan 30 13:36:57 2008 -0700
12796 Device tree updates
12798 Changes to match 5121 device tree going mainline in 2.6.25.
12800 Change OF_SOC from "soc5121" to plain "soc".
12801 Remove unneeded "ref-frequency" fixups.
12802 Remove "address" enetaddr fixup.
12804 Add bus-frequency fixup for old OF_SOC so old
12805 kernels with old device trees will work with new
12806 u-boot with 66MHz IPS clock
12810 commit de55d18df3ff2ea614624e74793de7c43520e0e7
12812 Date: Wed Jan 30 13:36:56 2008 -0700
12814 Change IPS freq to 66MHz
12816 Recommended frequency is 66MHz
12817 Change divider from 4 to 3.
12821 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
12823 Date: Mon Jan 14 22:38:55 2008 +0100
12825 xsengine: rename board_post_init to board_late_init
12827 missing migration from "Cleanup of some init functions"
12828 in c837dcb1a316745092567bfe4fb266d0941884ff
12832 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
12834 Date: Sat Jan 12 23:35:33 2008 -0500
12836 Add attribute POST_PREREL to ECC memory POST
12840 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
12842 Date: Thu Jan 17 08:25:45 2008 -0600
12844 QE: Move FDT support into a common file
12846 Move the flat device tree setup for QE related devices into
12847 a common file shared between 83xx & 85xx platforms that have QE's.
12851 commit d38da537943cd36356b9d3d9d9b60533554b81d8
12853 Date: Wed Jan 23 17:20:14 2008 +0100
12855 AVR32: Make SDRAM refresh rate configurable
12857 The existing code assumes the SDRAM row refresh period should always
12858 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
12859 refresh rate should really be 7.81 us.
12861 Add a refresh_period member to struct sdram_info and initialize it
12862 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
12863 panic() until the refresh_period member is updated properly.
12865 Big thanks to Gerhard Berghofer for pointing out this issue.
12869 commit 61151cccb660cdb06a07fb283de6089913d7bde0
12871 Date: Thu Apr 19 10:10:11 2007 +0200
12873 ATSTK1000: Fix potential flash programming bug
12875 The (now obsolete) atngw100 flash programming code was having problems
12876 programming the onboard at49bv642 chip. The atstk1000 flash
12877 programming code may have the same bug, so import fix for this problem
12878 from the AVR32 Linux BSP.
12882 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
12884 Date: Thu Nov 22 17:04:13 2007 +0100
12886 ATSTK1004: Fix comment about default load address
12888 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
12889 wouldn't have worked anyway since the board can only access 4MB of
12894 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
12896 Date: Thu Nov 22 17:01:24 2007 +0100
12898 ATSTK1002: Use SDRAM + 4MB as default load address
12900 Many people run into problems when they compile a big kernel and load
12901 the uImage at the default SDRAM + 2MB address as the kernel will
12902 overwrite the uImage as it is being unpacked. Increase the default
12903 load address so that we can load a 4MB kernel image without any
12908 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
12910 Date: Thu Nov 22 16:51:39 2007 +0100
12912 ATNGW100: Fix default mtest range
12914 Let mtest cover the whole SDRAM except the last megabyte, which is
12915 where u-boot lives.
12919 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
12921 Date: Tue Jan 22 15:31:56 2008 +0900
12923 sh: Fix register address of SH7722.
12925 The address of SH7722 is wrong by old document.
12926 This patch fixes this problem.
12930 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
12932 Date: Mon Feb 4 19:26:57 2008 -0500
12934 new command for displaying strings at specified memory locations
12938 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
12940 Date: Mon Feb 4 19:26:57 2008 -0500
12942 rewrite/cleanup Blackfin RTC driver
12946 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
12948 Date: Mon Feb 4 19:26:57 2008 -0500
12950 generate u-boot.ldr for Blackfin targets
12954 commit b779f7a59530436040f157f7841db7ab796542df
12956 Date: Mon Feb 4 19:26:57 2008 -0500
12958 scrub unused symbols
12962 commit cc2977acc3bbbb7850f16645dd1081f95335868d
12964 Date: Mon Feb 4 19:26:57 2008 -0500
12966 move Blackfin cpu object list to respective cpu directories
12970 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
12972 Date: Mon Feb 4 19:26:57 2008 -0500
12974 interface to Blackfin on-chip One-Time-Programmable memory
12978 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
12980 Date: Mon Feb 4 19:26:56 2008 -0500
12982 add support for memory commands with Blackfin L1 instruction memory
12986 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
12988 Date: Mon Feb 4 19:26:56 2008 -0500
12990 use C code rather than inline assembly
12994 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
12996 Date: Mon Feb 4 19:26:56 2008 -0500
12998 add Blackfin-specific reginfo command
13002 commit 0858b835e7ea501ea084d34cef75932f098342bb
13004 Date: Mon Feb 4 19:26:55 2008 -0500
13006 add support for Blackfin symbol prefixes to examples
13010 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
13012 Date: Mon Feb 4 19:26:55 2008 -0500
13014 add Blackfin-specific bdinfo command
13018 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
13020 Date: Mon Feb 4 19:26:55 2008 -0500
13022 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
13026 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
13028 Date: Mon Feb 4 19:26:55 2008 -0500
13030 unify the Blackfin board targets
13034 commit d4d7730853e5d675f76ec666807da3028c91d592
13036 Date: Mon Feb 4 19:26:55 2008 -0500
13038 punt Blackfin VDSP headers and import sanitized/auto-generated ones
13042 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
13044 Date: Mon Feb 4 19:26:54 2008 -0500
13046 always pull in asm/blackfin.h for Blackfin ports
13050 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
13052 Date: Mon Feb 4 19:26:54 2008 -0500
13054 add missing __raw versions of Blackfin read/write io functions
13058 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
13060 Date: Mon Feb 4 19:26:54 2008 -0500
13062 add the default Blackfin logo used by Blackfin boards with splash screens
13066 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
13068 Date: Mon Feb 4 19:26:54 2008 -0500
13070 add some more Blackfin docs
13074 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
13076 Date: Mon Feb 4 19:26:54 2008 -0500
13078 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
13082 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
13084 Date: Mon Feb 4 19:26:54 2008 -0500
13086 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
13090 commit b45264ee85cbd92020640a32e02fb434fd557108
13092 Date: Mon Feb 4 19:26:53 2008 -0500
13094 add gitignores for Blackfin pieces
13098 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
13100 Date: Fri Jan 18 01:14:03 2008 +0100
13102 TFTP: add host ip addr support
13104 allow to use a different server as set in serverip
13105 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
13106 if not defined the max length will be at 128
13110 commit e56b4b494cd92def577969f9678395aa22d34c9f
13112 Date: Wed Jan 9 14:35:26 2008 -0600
13114 85xx,86xx: Determine I2C clock frequencies and store in global_data
13116 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
13118 Update the get_clocks() function in 85xx and 86xx to determine the I2C
13119 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
13123 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
13125 Date: Thu Dec 27 10:56:54 2007 +0100
13127 OMAP5912: fix FIFO handling in UART driver
13129 According to the OMAP5912 Serial Interfaces Reference Guide (see
13130 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
13131 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
13132 changed when the baud clock is not running, i. e. when both DLL and
13135 Thus make sure that DLL and DLH are 0 when writing the FCR.
13139 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
13141 Date: Wed Dec 19 15:10:52 2007 +0100
13143 ARM: S3C24x0 SoC NAND controller support
13145 This patch adds NAND support to the S3C24x0 SoC code in u-boot
13149 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
13151 Date: Wed Dec 19 14:24:40 2007 +0100
13153 ARM: s3c24xx: Multiple serial port support
13155 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
13159 commit a25f72f1f73a11de68251fb88c89991e202e68fa
13161 Date: Wed Dec 19 14:16:57 2007 +0100
13163 ARM: arm920t: Allow use of 'gd' pointer from IRQ
13165 This patch allows us to use the 'gd' pointer (and thus environment
13166 and everything else associated with it) from interrupt context on
13171 commit be19bd5cd0f454b63298844a0b5377e029b2caad
13173 Date: Wed Dec 19 14:19:38 2007 +0100
13175 ARM: arm920/s3c24xx: IRQ demulitplexer callback
13177 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
13178 plus a stub implementation of it for the S3C2410.
13180 The purpose is to allow arm920t implementations such as the s3c24x0 to
13181 implement interrupt handlers in u-boot without having to touch core
13186 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
13188 Date: Tue Dec 18 16:03:07 2007 -0800
13190 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
13192 Add ifdef to bdinfo command to display ethernet information
13193 only if CONFIG_CMD_NET is defined for arm modules.
13197 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
13199 Date: Tue Dec 18 16:00:54 2007 -0800
13201 ARM: add I2C init function call in lib_arm/board.c
13203 Adds I2C init func call to init sequence for ARM boards. This is
13204 present in ppc,blackfin and other processor init sequence.
13208 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
13210 Date: Fri Feb 1 09:38:29 2008 +0100
13212 ppc4xx: Fix ndfc HW ECC byte order
13214 The current ndfc HW ECC implementation swaps the first two ECC bytes.
13215 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
13216 so this swapping in the HW ECC driver is bogus. This patch fixes this
13217 problem and now really uses the SMC ECC byte order.
13219 Thanks to Sean MacLennan for pointing this out.
13223 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
13225 Date: Wed Jan 30 15:35:50 2008 +0100
13227 ppc4xx: Fix GPIO configuration for pcs440ep
13229 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
13230 49-63 for GPIO. They have been configured as trace signals. This patch
13231 fixes this by clearing the corresponding bit.
13235 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
13237 Date: Wed Jan 30 14:48:28 2008 +0100
13239 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
13243 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
13245 Date: Fri Dec 7 00:42:32 2007 +0100
13247 ARM: Board voiceblue update
13251 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
13253 Date: Thu Dec 6 23:24:57 2007 +0100
13255 ARM: AT91RM9200 based boards config cleanup
13259 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
13262 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
13264 Date: Thu Dec 6 22:59:16 2007 +0100
13266 ARM: Fix at91rm9200dk base address
13268 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
13269 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
13270 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
13271 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
13272 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
13273 I'm sending this patch 4th (!) time in hope it produces at least some
13278 Fix at91rm9200dk base and environment address.
13280 commit c95219fae2a7add7daa2f91aedca65b1698465c7
13282 Date: Tue Nov 20 10:40:24 2007 +0100
13284 MMC for PXA 27X (resubmit)
13286 MMC support for X_Scale PXA is broken and does not work.
13287 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
13288 There were already some patches around the world but none of them was
13289 merged into the official u-boot tree.
13291 This patch makes order fixing this issue. Resubmit after code cleanup.
13293 Applied and tested on PXA 270 (TrizepsIV module).
13297 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
13299 Date: Tue Nov 20 10:37:04 2007 +0100
13301 Fix gcc issues in pxa-regs.h
13303 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
13304 issues generates wrong code.
13305 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
13306 This patch fixes the problem and solves the gcc-4 issues as the linux
13312 commit 7047b388876e7b905b2ec4edb8010543e3641b85
13314 Date: Tue Jan 29 08:45:03 2008 +0100
13316 TQM834x: enable DHCP
13321 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
13323 Date: Tue Jan 29 08:45:02 2008 +0100
13325 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
13330 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
13332 Date: Sat Jan 26 23:41:19 2008 -0500
13334 Fix conditional compilation of mpx8xxx_spi driver
13336 This driver should only compile if CONFIG_MPC8XXX_SPI is set
13341 commit 63f732d3d3880feb531f48af247c025bf01462b0
13343 Date: Tue Jan 29 17:00:34 2008 +0100
13345 API: Provide dummy halt() in the glue layer.
13347 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
13351 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
13353 Date: Tue Jan 29 16:57:38 2008 +0100
13355 API: Convert conditional building to the new scheme.
13357 This fixes a build breakage with CONFIG_API enabled, which appeared after
13358 the recent changes in the U-Boot build system.
13362 commit 98b742489c09780be6a832eeaa4e5eff824792bb
13364 Date: Fri Jan 25 09:56:17 2008 +0100
13366 inka4x0: remove dead code
13370 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
13372 Date: Wed Jan 23 16:31:06 2008 -0600
13374 86xx: Add reginfo command
13378 commit ddcebcb638715a6278da93b553d5016f99823816
13380 Date: Wed Jan 23 16:31:05 2008 -0600
13382 86xx: Add print_laws function to fsl_law.c
13384 This can be used for debug, and will be used by board code
13385 to help implement reginfo.
13389 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
13391 Date: Wed Jan 23 16:31:04 2008 -0600
13393 86xx: Remove old-style law setup code
13395 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
13399 commit 713d8186649dae874613d495b0cecaa039a98b30
13401 Date: Wed Jan 23 16:31:03 2008 -0600
13403 86xx: Convert sbc8641d to use new law setup code.
13407 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
13409 Date: Wed Jan 23 16:31:02 2008 -0600
13411 86xx: Convert mpc8610hpcd to new law setup method.
13415 commit 4933b91f8a49e436681f163df3173beb91cac44a
13417 Date: Wed Jan 23 16:31:01 2008 -0600
13419 86xx: Support new law setup method and convert mpc8641
13421 Adds the support code in cpu/mpc86xx for the new law setup code
13422 recently created fsl_law.c, and changes the MPC8641HPCN config
13427 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
13429 Date: Wed Jan 23 16:31:00 2008 -0600
13431 86xx: Rearrange the sequence in start.S
13433 * split the BAT initialization so that only 2 BATs (for the boot page
13434 and stack) are programmed very early on. The rest are initialized later.
13435 * Move other BAT setup, ccsrbar setup, and law setup later in the code
13436 after translation has been enabled.
13438 These changes will facilitate the moving of law and BAT initialization
13439 to C code, and will aid with 36-bit physical addressing support.
13443 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
13445 Date: Wed Jan 23 14:41:37 2008 +0100
13447 Coding Style Cleanup; update CHANGELOG
13451 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
13453 Date: Wed Jan 23 14:31:17 2008 +0100
13455 Coding Style Cleanup; update CHANGELOG
13459 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
13461 Date: Fri Jan 18 10:07:04 2008 +0800
13463 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
13465 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
13466 cause the 83xx immap broken, so the DMA and PCI will
13469 The patch fix the struct spi8xxx and rm struct spi83xx.
13474 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
13476 Date: Sat Apr 14 17:11:49 2007 +0200
13478 AVR32: ATNGW100 board support
13480 Add support for the ATNGW100 Network Gateway reference design,
13481 including flash, ethernet and MMC support.
13485 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
13487 Date: Sat Nov 24 18:15:31 2007 +0100
13489 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
13491 I don't know why the relevant layers can't do this by itself, but this
13496 commit 799891ef7b1b3432032ec23466df6b665a797fa4
13498 Date: Fri Jan 18 00:04:28 2008 +0100
13500 Add AcTux board support
13504 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
13506 contain changes for multiple boards, the board-specific files follow as
13511 commit 66a4344a4d910a11125df7768899ad529719855e
13513 Date: Wed Jan 16 19:53:23 2008 +0100
13515 add AcTux-4 board support
13519 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
13521 Date: Wed Jan 16 19:51:55 2008 +0100
13523 add AcTux-3 board support
13527 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
13529 Date: Wed Jan 16 19:51:14 2008 +0100
13531 add AcTux-2 board support
13535 commit ea99e8f05b7240fd657739e286664664ae160abe
13537 Date: Wed Jan 16 19:50:37 2008 +0100
13539 add AcTux-1 board support
13543 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
13545 Date: Mon Jan 14 19:20:08 2008 +0100
13547 ARM: remove useless function board_post_init
13551 commit 96bd462942022e4569b582c072a0ed26de1cd19b
13553 Date: Thu Jan 10 14:59:46 2008 +0100
13557 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
13558 No handshaking is done, but the active RTS signal allows to
13559 connect to the target using a PC which is using RTS/CTS
13560 handshake, and does no harm if the PC is set to ignore RTS.
13564 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
13566 Date: Mon Jan 7 08:41:34 2008 +0100
13568 IXP: add dynamic microcode addr
13570 allow to load the microde from flash or ram by download it through
13571 the serial or other.
13576 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
13578 Date: Sat Nov 10 15:44:12 2007 +0100
13580 load ixp42x NPE firmware from separate flash block, remove dead code
13584 the following patch adds support to move the IXP42X NPE firmware to a
13585 separate flash block, whose start address is defined in
13586 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
13587 NPE-enabled u-boot without copyright problems due to the NPE firmware.
13589 I hope the patch applies, I get whitespace-related differences in the NPE
13590 files due to trailing whitespace in the original versions.
13595 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
13597 Date: Tue Jan 15 14:15:46 2008 -0600
13599 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
13604 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
13606 Date: Tue Jan 15 14:02:49 2008 -0600
13608 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
13613 commit 777d1abd9796f1c2e148417cc10657e847d318ce
13615 Date: Tue Jan 15 14:00:25 2008 -0600
13617 ColdFire: Add MCF547x_8x FEC driver
13623 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
13625 Date: Tue Jan 15 13:54:09 2008 -0600
13627 ColdFire: Add MCF547x_8x dma code and header files
13632 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
13634 Date: Tue Jan 15 13:52:03 2008 -0600
13636 ColdFire: Add MCF547x_8x dma code - 2
13641 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
13643 Date: Tue Jan 15 13:48:52 2008 -0600
13645 ColdFire: Add MCF547x_8x dma code - 1
13650 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
13652 Date: Tue Jan 15 13:39:44 2008 -0600
13654 ColdFire: Add MCF547x_8x related header files
13660 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
13662 Date: Tue Jan 15 13:37:34 2008 -0600
13664 ColdFire: Add MCF547x_8x cpu arch
13669 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
13671 Date: Mon Jan 14 17:47:23 2008 -0600
13673 ColdFire: Add MCF5227x cpu and M52277EVB support-3
13678 commit c87581027994c148131b2f11aa75501f782ec19a
13680 Date: Mon Jan 14 17:46:19 2008 -0600
13682 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
13687 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
13689 Date: Mon Jan 14 17:43:33 2008 -0600
13691 ColdFire: Add MCF5227x cpu and M52277EVB support-1
13696 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
13698 Date: Mon Jan 14 17:35:44 2008 -0600
13700 ColdFire: Fix CFI Flash low level Read/Write macro
13705 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
13707 Date: Mon Jan 14 17:23:08 2008 -0600
13709 ColdFire: Add M5373EVB platform support - 2
13714 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
13716 Date: Mon Jan 14 17:19:54 2008 -0600
13718 ColdFire: Add M5373EVB platform support - 1
13723 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
13725 Date: Mon Jan 14 17:17:03 2008 -0600
13727 ColdFire: Update FlexBus CS for MCF532x
13729 Definition update and change from 16bit to 32bit
13734 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
13736 Date: Mon Jan 14 17:11:47 2008 -0600
13738 ColdFire: PCI and misc updates for MCF5445x
13743 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
13745 Date: Mon Jan 14 17:06:55 2008 -0600
13747 ColdFire: MCF5445x header files cleanup
13752 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
13754 Date: Mon Jan 14 16:59:42 2008 -0600
13756 ColdFire: MCF532x header files cleanup
13761 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
13763 Date: Mon Jan 14 15:30:15 2008 -0600
13765 ColdFire: Add modules header files
13767 Add CF specific modules header files
13772 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
13774 Date: Thu Jan 17 12:48:00 2008 -0600
13776 codingstyle cleanup for spi driver
13778 ..and rm unused CONFIG_FSL_SPI define
13782 commit d59feffb42c9f174116db7a82a311df98983dfce
13784 Date: Wed Jan 16 17:12:12 2008 -0500
13786 FSL: Fix common EEPROM_data structure definition
13788 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
13789 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
13794 commit 6bee764bd6da510a4aad614880300c968bc7318d
13796 Date: Wed Jan 16 15:48:12 2008 -0600
13798 86xx: enable command-line editing
13800 Enable command-line editing for all MPC86xx boards.
13804 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
13806 Date: Wed Jan 16 22:37:42 2008 -0500
13808 Implement hard SPI driver on MPC8349EMDS
13810 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
13811 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
13816 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
13818 Date: Wed Jan 16 22:37:35 2008 -0500
13820 Add support for a Freescale non-CPM SPI controller
13822 This patch adds support for the SPI controller found on Freescale PowerPC
13823 processors such as the MCP834x family. Additionally, a new config option,
13824 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
13829 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
13831 Date: Thu Jan 17 18:23:19 2008 +0800
13833 mpc83xx: Fix the fatal conflict of merge
13835 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
13836 will cause the mpc8315erdb board can't boot up.
13838 The patch fix that bug, and remove the duplicated #ifdef
13839 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
13840 MPC8313E processor.
13845 commit 3259eeaa4148125a81417477f62c05bd67f60587
13847 Date: Thu Jan 17 08:50:09 2008 -0500
13849 Merge Sequoia beautification into Korat code
13853 commit e16925773211291b562e77187061e9dd1d757217
13855 Date: Thu Jan 17 07:45:05 2008 +0100
13857 net: add 'ethrotate' environment variable
13859 [PATCH] net: add 'ethrotate' environment variable
13861 This patch replaces the buildtime configuration option
13862 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
13863 configuration veriable. See README.
13868 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
13870 Date: Thu Jan 17 14:29:04 2008 +0100
13872 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
13876 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
13878 Date: Thu Jan 17 18:07:32 2008 +0900
13880 sh: Remove CONFIG_COMMANDS from MS7720SE config file
13884 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
13886 Date: Wed Jan 16 18:39:20 2008 +0100
13888 ppc4xx: Netstal HCU4 board: added various fixes and POST
13890 - Moved some common code to netstal/common/nm_bsp.c.
13891 - sdram initialisation goes go netstal/common/fixed_sdram.c.
13892 - Added support for POST.
13893 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
13897 commit 69b0634a4ee98c9791815600d43b99f626a952f3
13899 Date: Thu Jan 17 12:53:56 2008 +0100
13901 ppc4xx: netstal/common define routines used by all boards
13903 Added some routines used by all Netstal boards:
13904 - nm_bsp.c: - nm_show_print and
13905 - common_misc_init_r
13906 - set_params_for_sw_install. Very specific code to handle our SW
13907 installation procedure
13908 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
13909 to handle sdram initialization.
13910 - nm.h: Common header
13914 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
13916 Date: Wed Jan 16 18:39:18 2008 +0100
13918 ppc4xx: Netstal HCU5 board: added various fixes and POST
13920 - Moved some common code to nestal/common/nm_bsp.c.
13921 - Added support for the vxWorks EDR.
13922 - Enable trace for Lauterbach, if present.
13923 - Added support for POST.
13924 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
13928 commit 4371090e5da77edc7bf9f296364db4801639d9c4
13930 Date: Wed Jan 16 18:39:08 2008 +0100
13932 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
13935 - Reduced rom_size from 384 to 320 kB
13936 - Environment is now in flash
13942 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
13944 Date: Wed Jan 16 18:37:50 2008 +0100
13946 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
13949 - Reduced rom_size from 384 to 320 kB
13950 - Environment is now in flash
13956 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
13958 Date: Thu Jan 17 10:53:08 2008 +0100
13960 ppc4xx: Complete DU440 board support
13964 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
13966 Date: Thu Jan 17 10:52:30 2008 +0100
13968 ppc4xx: Add DU440 board support
13972 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
13974 Date: Thu Jan 17 15:53:52 2008 +0900
13976 sh: Update SuperH SCIF driver
13978 This patch fixed wrong SH7720 CPU macro and changed macro that
13979 calculated value of SCBRR register.
13983 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
13985 Date: Wed Jan 16 15:12:47 2008 +0100
13987 Set ips dividor to 1/4 of csb clock.
13989 Previous setting cause ips clock to be out of spec. This bug was found by John
13990 Rigby from Freescale.
13994 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
13996 Date: Thu Jan 17 02:19:18 2008 -0600
13998 85xx: Get ride of old TLB setup code
14000 Now that all boards have been converted, remove old config code and the
14001 config option for the new style.
14005 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
14007 Date: Thu Jan 17 02:02:10 2008 -0600
14009 85xx: Convert TQM85xx to new TLB setup
14013 commit 74121b470c14f7eaf284ee838bffca6f9521069e
14015 Date: Thu Jan 17 01:56:32 2008 -0600
14017 85xx: Convert STXGP3 & STXSSA to new TLB setup
14021 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
14023 Date: Thu Jan 17 01:44:34 2008 -0600
14025 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
14029 commit 818218bac6a11591e2542c344d2330e0f4e1968b
14031 Date: Thu Jan 17 01:31:34 2008 -0600
14033 85xx: Convert PM854/PM856 to new TLB setup
14037 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
14039 Date: Thu Jan 17 01:25:33 2008 -0600
14041 85xx: Convert MPC8540EVAL to new TLB setup
14045 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
14047 Date: Thu Jan 17 01:12:22 2008 -0600
14049 85xx: Convert MPC8568 MDS to new TLB setup
14053 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
14055 Date: Thu Jan 17 01:01:09 2008 -0600
14057 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
14061 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
14063 Date: Thu Jan 17 00:52:29 2008 -0600
14065 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
14069 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
14071 Date: Thu Jan 17 00:32:17 2008 -0600
14073 85xx: Convert ATUM8548 to new TLB setup
14077 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
14079 Date: Wed Jan 16 23:11:57 2008 -0600
14081 85xx: Convert MPC8544 DS to new TLB setup
14085 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
14087 Date: Wed Jan 16 22:38:34 2008 -0600
14089 85xx: Reworked initial processor init
14091 Reworked the initial processor initialzation sequence:
14092 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
14093 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
14094 * Reworked initial asm code to do most of the core init before TLBs
14096 The main reasons for these changes are to allow handling of 36-bit phys
14097 addresses in the future and some of the issues that will exist when we
14100 There are a few caveats on what can be initialized via the LAW and TLB
14102 * TLB entry 14/15 can't be initialized via the TLB table
14103 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
14104 the code that is currently executing.
14108 commit 44a23cfd6360a68eaa41f945190618a55519eac3
14110 Date: Wed Jan 16 22:33:22 2008 -0600
14112 85xx: Introduce new tlb API
14114 Add a set of functions to manipulate TLB entries:
14115 * set_tlb() - write a tlb entry
14116 * invalidate_tlb() - invalidate a tlb array
14117 * disable_tlb() - disable a variable size tlb entry
14118 * init_tlbs() - setup initial tlbs based on static table
14122 commit be88b1699863c262818f3af7f60173b4d48df8fc
14124 Date: Thu Jan 17 07:50:17 2008 +0100
14126 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
14130 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
14132 Date: Wed Jan 16 10:04:42 2008 -0600
14134 85xx: Use proper defines for PCI addresses
14136 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
14137 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
14138 be used for configuring the PCI ATMU.
14142 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
14144 Date: Wed Jan 16 09:22:29 2008 -0600
14146 85xx: Remove old style of LAW init
14148 All boards are now using the new fsl_law code so we can drop the old version.
14152 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
14154 Date: Wed Jan 16 09:15:29 2008 -0600
14156 85xx: convert remaining 85xx boards over to use new LAW init code
14158 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
14159 to use new LAW init code.
14163 commit 572b13afc42710f2957c382a710360429c0e099b
14165 Date: Wed Jan 16 09:11:53 2008 -0600
14167 85xx: convert STXGP3/STXSSA over to use new LAW init code
14171 commit 45f2166ac0233a9263058378f39612bd11f61196
14173 Date: Wed Jan 16 09:06:48 2008 -0600
14175 85xx: convert PM854/PM856 over to use new LAW init code
14179 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
14181 Date: Wed Jan 16 09:05:27 2008 -0600
14183 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
14187 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
14189 Date: Wed Jan 16 01:45:10 2008 -0600
14191 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
14195 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
14197 Date: Wed Jan 16 01:32:06 2008 -0600
14199 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
14203 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
14205 Date: Wed Jan 16 01:16:16 2008 -0600
14207 85xx: convert MPC8544 DS over to use new LAW init code
14211 commit 83d40dfd79fe868796275802f60116d84b9e4395
14213 Date: Wed Jan 16 01:13:58 2008 -0600
14215 85xx: Move LAW init code into C
14217 Move the initialization of the LAWs into C code and provide an API
14218 to allow modification of LAWs after init.
14220 Board code is responsible to provide a law_table and num_law_entries.
14222 We should be able to use the same code on 86xx as well.
14226 commit bed8ce838a609aaab136d43b25e6df2a520bc854
14228 Date: Sat Dec 22 15:03:12 2007 +0100
14230 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
14234 commit 0764c164fed6277d359cf132d55187ea34290114
14236 Date: Wed Jan 16 19:27:51 2008 +0200
14238 MIPS:Target support for qemu -M mips
14240 With serial, NE2000, IDE support. Tested in big-endian mode.
14241 Memory size hard-coded to 128M for now, so don't play with
14246 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
14248 Date: Fri Jan 11 00:01:37 2008 +0100
14250 Fix nfs command help to reflect that the serverip is optional
14255 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
14257 Date: Mon Dec 10 22:32:14 2007 +0100
14259 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
14261 and move is_valid_ether_addr board file
14266 commit c2f896b8fc4722e36915903e1942e138e68ce804
14268 Date: Wed Jan 16 16:13:31 2008 +0900
14270 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
14272 rx_status on the memory is basically in LE, but needs to be handled in CPU
14273 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
14281 commit 96a236746fe6a7b84802afb4ed31536696d34812
14283 Date: Wed Jan 16 16:12:26 2008 +0900
14285 drivers/net/rtl8139.c: Fix cache coherency issues
14287 Current driver is meant for cache coherent systems. This patch adds
14288 flush_cache() routines to support cache non-coherent systems.
14295 commit d1276c76c1e2b5035296689280ba1acb2c425104
14297 Date: Wed Jan 16 16:11:14 2008 +0900
14299 drivers/net/rtl8139.c: Fix tx timeout
14301 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
14302 does, the condition "(currticks() < to)" becomes invalid and immediately
14303 leads to tx timeout error. This patch introduces the fine-graded udely(10)
14304 loops to ease the impact of wrapping around.
14311 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
14313 Date: Fri Jan 11 18:45:28 2008 +0800
14315 TSEC: Add the support for RealTek RTL8211B PHY
14317 Add the support of RealTek RTL8211B PHY, the RTL8211B
14318 PHY only supports RGMII and MII mode.
14323 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
14325 Date: Wed Jan 16 09:40:41 2008 +0100
14327 Remove annoying debug printout for PHY less boards.
14329 PHY less board prints out lots of "read wrong ...":
14330 read wrong value : mii_id 3,mii_reg 2, base e0102320
14331 read wrong value : mii_id 3,mii_reg 3, base e0102320
14332 UEC: PHY is Generic MII (ffffffff)
14333 read wrong value : mii_id 3,mii_reg 4, base e0102320
14334 read wrong value : mii_id 3,mii_reg 0, base e0102320
14335 read wrong value : mii_id 3,mii_reg 1, base e0102320
14336 read wrong value : mii_id 3,mii_reg 1, base e0102320
14337 read wrong value : mii_id 3,mii_reg 5, base e0102320
14338 read wrong value : mii_id 3,mii_reg 1, base e0102320
14339 read wrong value : mii_id 3,mii_reg 1, base e0102320
14340 read wrong value : mii_id 3,mii_reg 5, base e0102320
14341 FSL UEC0: Full Duplex
14342 FSL UEC0: Speed 100BT
14343 FSL UEC0: Link is up
14344 Using FSL UEC0 device
14346 Make this printout depend on UEC_VERBOSE_DEBUG and
14347 remove its definition in uec_phy.c
14352 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
14354 Date: Tue Jan 15 14:11:00 2008 -0600
14356 net: reduce boot latency on QE UEC based boards
14358 actually polling for PHY autonegotiation to finish enables us to remove the
14359 5 second boot prompt latency present on QE based boards.
14361 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
14362 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
14363 code shamelessly stolen from tsec driver.
14365 also rm unused CONFIG_RMII_MODE code.
14371 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
14373 Date: Wed Jan 16 11:40:51 2008 +0000
14375 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
14377 The current TSEC driver limits MDIO access to the devices that have been configured as attached
14378 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
14384 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
14386 Date: Wed Jan 16 00:38:05 2008 -0600
14388 Add support for the MPC837xERDB
14390 MPC837xERDB board support includes:
14391 * DDR2 330MHz hardcoded (soldered on the board)
14392 * Local Bus NOR Flash
14393 * I2C, UART and RTC
14394 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
14395 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
14402 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
14404 Date: Wed Jan 16 12:06:16 2008 -0600
14406 mpc83xx: add support for more system clock performance controls
14408 System registers that are modified are the Arbiter Configuration
14409 Register (ACR), the System Priority Control Register (SPCR), and the
14410 System Clock Configuration Register (SCCR).
14416 commit 16c3cde050e2d243e62b37486f1558570787beb8
14418 Date: Wed Jan 16 11:58:08 2008 -0600
14420 FSL: Generalize PIXIS reset command parsing.
14422 Before, the order of arguments to the pixis_reset
14423 command needed to be supplied in a hard-coded order.
14424 Generalize the command parsing to allow any order.
14429 commit ad8f8687b78c3e917b173f038926695383c55555
14431 Date: Tue Jan 15 13:42:41 2008 -0600
14433 FSL: Convert board/freescale/common/Makefile to use CONFIG_
14435 Convert the board/freescale/common/Makefile to use
14436 CONFIG_* options to select which files to conditionally
14437 compile into the board/freescale/common library rather
14438 than conditionally compiling entire files.
14445 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
14449 commit 7c2221eb230372a9e537c4f6636b147b0909325f
14451 Date: Tue Jan 15 16:38:38 2008 +0800
14453 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
14455 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
14456 Remove unused ethernet CONFIG_ options.
14461 commit 711a7946277d2e29af481011e8635e9975c54e45
14463 Date: Tue Jan 15 14:05:14 2008 -0600
14465 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
14467 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
14471 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
14473 Date: Tue Jan 15 09:51:12 2008 -0600
14475 mpc83xx: clean up mpc8360emds.c warnings
14477 mpc8360emds.c: In function 'ft_board_setup':
14478 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
14479 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
14480 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
14481 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
14482 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
14483 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
14487 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
14489 Date: Mon Jan 14 16:14:46 2008 -0600
14491 mpc83xx: fix phy-connection-type fixup code
14493 use tree passed to us in local blob, not global fdt.
14495 Also use fdt_path_offset to convert to relative offset, since absolute
14496 reference is needed to check for rgmii-id mode string value.
14500 commit 2b4c952be7c4357a13e839d48df80853820c33eb
14502 Date: Mon Jan 14 09:01:40 2008 -0600
14504 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
14509 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
14511 Date: Mon Jan 14 09:41:14 2008 +0530
14513 Changes in uboot DDR configuration for MPC8313eRDB
14515 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
14516 DDR configuration in u-boot code. Some are related to performance, some
14517 affect stability and some correct few basic errors in the current
14520 The changes have been tested and found to give better memory latency
14521 figures on MPC8313eRDB.LMBench figures prove it.
14525 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
14526 (this may improve performance for application with many read
14527 or write to open pages).
14528 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
14529 001 (activating all the CS when only one is used may cause
14530 unwanted noise on the system)
14532 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
14534 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
14536 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
14537 comply with the 3 ODT clk requirements)
14538 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
14539 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
14541 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
14542 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
14544 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
14545 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
14547 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
14548 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
14556 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
14558 Date: Sat Jan 12 13:24:14 2008 -0500
14560 Enable the isdram command on the MPC8360EMDS board
14562 The isdram command prints out decoded information the "serial presence
14563 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
14564 debugging memory configuration problems.
14569 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
14571 Date: Fri Jan 11 18:48:24 2008 +0800
14573 mpc83xx: Add the support for MPC8315ERDB board
14576 - Boot from NOR Flash
14577 - DDR2 266MHz hardcoded configuration
14578 - Local bus NOR Flash R/W operation
14579 - I2C, UART, MII and RTC
14586 commit b05884efa614e4d8a9413158fc228e0dc02ab704
14588 Date: Fri Jan 11 18:46:50 2008 +0800
14590 mpc83xx: Add config of eTSEC emergency priority in SPCR
14592 The TSEC emergency priority definition of 831x/837x
14593 is different than the definition of 834x in SPCR register.
14595 Add the other config of TSEC emergency priority into
14601 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
14603 Date: Fri Jan 11 18:42:19 2008 +0800
14605 mpc83xx: Remove cache config from MPC8360ERDK.h
14607 The MPC8360ERDK board support patch is added before
14608 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
14609 so, miss clean up it.
14611 The patch clean up the miss cache config.
14616 commit cd9d23053d435c08fc8695017b5cb9003fcda786
14618 Date: Mon Jan 14 23:09:32 2008 +0300
14620 nand: FSL UPM NAND driver
14624 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
14626 Date: Tue Jan 15 08:59:44 2008 +0900
14628 OneNAND: Separate U-Boot dependent code from OneNAND
14630 OneNAND: Separate U-Boot dependent code from OneNAND
14634 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
14636 Date: Wed Jan 16 10:33:46 2008 +0100
14638 ppc4xx: Sequoia coding style cleanup and beautification
14642 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
14644 Date: Tue Jan 15 14:35:58 2008 -0500
14646 ppc4xx: Refactor ECC POST for AMCC Denali core
14648 The ECC POST reported intermittent failures running after power-up on
14649 the Korat PPC440EPx board. Even when the test passed, the debugging
14650 output occasionally reported additional unexpected ECC errors.
14652 This refactoring has three main objectives: (1) minimize the code
14653 executed with ECC enabled during the tests, (2) add more checking of the
14654 results so any unexpected ECC errors would cause the test to fail, and
14655 (3) use synchronization (only) where required by the processor.
14659 commit 2465665b73ac2f688af945b1ed510752afa816a4
14661 Date: Tue Jan 15 10:40:24 2008 +0200
14663 QE UEC: Extend number of supported UECs to 4
14665 This patch extends the number of supported UECs to 4. Note that the
14666 problem of QE thread resources exhaustion is resolved by setting the
14667 correct number of QE threads according to Ethernet type (GBE or FE).
14672 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
14674 Date: Wed Jan 16 00:01:01 2008 +0100
14676 LWMON5: enable hush shell as command line parser
14680 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
14682 Date: Tue Jan 15 17:22:28 2008 +0100
14684 ADS5121: disable watchdog; enable image timestamps
14688 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
14690 Date: Tue Jan 15 17:21:28 2008 +0100
14692 TK885D: fixes for bigger flash sector sizes on new modules;
14693 adjust default environment;
14694 disable SCC ethernet (not used on this board).
14698 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
14700 Date: Tue Jan 15 17:48:13 2008 +0900
14702 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
14706 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
14708 Date: Tue Jan 15 23:25:25 2008 +0900
14710 sh: Add support SH7710/SH7712
14712 SH7710/SH7712 of SH3 CPU are supported.
14713 SH771X is called SH-Ether, and has the Ether controller in CPU.
14714 The driver of Ether is not included in this patch.
14718 commit 63a11be68306870e04d3851ed9fa41955cdf4894
14720 Date: Tue Jan 15 23:06:17 2008 +0900
14722 sh: Add support of map_physmem() and unmap_physmem() to SuperH
14724 This patch add the support of map_physmem() and unmap_physmem()
14725 used with Common Flash Interface(CFI) driver.
14729 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
14731 Date: Wed Jan 9 14:42:27 2008 +0900
14733 sh: Add maintainer of MS7720SE to the MAINTAINER file
14737 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
14739 Date: Wed Jan 9 14:39:58 2008 +0900
14741 sh: Fix board name in MS7720SE's config.mk
14745 commit c0a04d93734d768b39dbb72fb501b65614c8615d
14747 Date: Wed Jan 9 14:37:36 2008 +0900
14749 sh: Add MS7720SE to MAKEALL
14753 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
14755 Date: Mon Dec 3 22:58:50 2007 +0900
14757 sh: Add support for MS7720RP02 board
14763 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
14765 Date: Wed Jan 9 14:30:02 2008 +0900
14767 sh: Add support for SH7720 in serial_sh driver.
14773 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
14775 Date: Mon Dec 3 22:58:45 2007 +0900
14777 sh: Add support SH3 and SH7720
14783 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
14785 Date: Tue Jan 15 10:11:02 2008 +0100
14787 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
14791 commit 17bef68097ab3692500a36fb31115bff7910aa99
14793 Date: Mon Jan 14 14:04:42 2008 +0100
14795 ppc_4xx: Fix post spr.c for PPC405
14797 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
14798 for PPC440 and derivates processor.
14802 commit 06c428bcd4413014b43236e77765022071424fa6
14804 Date: Mon Jan 14 11:12:01 2008 +0800
14806 QE: fix compile warning
14808 qe.c: In function 'qe_upload_firmware':
14809 qe.c:390: warning: pointer targets in passing argument 2
14810 uec.c: In function 'uec_initialize':
14811 uec.c:1236: warning: 'uec_info' may be used uninitialized
14815 commit a0dd99d51efa55fe023e19c97ead92683725eb11
14817 Date: Mon Jan 14 10:05:05 2008 +0100
14819 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
14821 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
14822 to remove the USB PHY reset after powerup. The CPLD will keep the
14823 USB PHY in reset (active low) until the bit is set to 1 in
14824 board_early_init_f().
14828 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
14830 Date: Sun Jan 13 23:26:45 2008 +0100
14832 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
14836 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
14838 Date: Sun Jan 13 23:37:50 2008 +0100
14840 ADS5121: Fix typo in ads5121.c, adjust default environment
14844 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
14846 Date: Fri Aug 24 18:18:43 2007 -0600
14848 ADS5121: MAX slew rate for PATA pins
14852 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
14854 Date: Sun Jan 13 21:05:52 2008 +0100
14856 Fix Makefile dependency problem with parallel builds.
14860 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
14862 Date: Sun Jan 13 19:51:39 2008 +0100
14864 MPC8544DS: fix board Makefile for silent build (with -s)
14868 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
14870 Date: Sun Jan 13 16:44:08 2008 +0100
14872 PMC440 board: fix board Makefile for out-of-tree building
14876 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
14878 Date: Sun Jan 13 16:07:44 2008 +0100
14880 Makalu: fix compile warning
14884 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
14886 Date: Sun Jan 13 12:36:12 2008 +0100
14888 cmd_nand : fix compiler warning.
14892 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
14894 Date: Sat Jan 12 20:29:47 2008 +0100
14896 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
14901 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
14903 Date: Sun Jan 13 02:19:44 2008 +0100
14905 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
14909 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
14911 Date: Sun Jan 13 02:19:13 2008 +0100
14913 MPC8xx FEC driver: fix compiler warning.
14917 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
14919 Date: Sun Jan 13 00:59:21 2008 +0100
14921 Fix Makefile dependencies issues; allow silent build
14923 - get rid of "version" target whichdidn't really work
14924 - make autoconf.mk depend on version_autogenerated.h to make sure
14925 to rebuild files as needed
14926 - add XECHO macro to allow for silent build using "make -s"
14930 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
14932 Date: Sun Jan 13 00:55:47 2008 +0100
14934 ADS5121e: fix compile warning
14938 commit f2b6f4610627fe3d607620e25082916a01538875
14940 Date: Sun Jan 13 00:55:18 2008 +0100
14942 MUNICes: fix board Makefile for remote build directory
14946 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
14948 Date: Wed Jan 9 17:04:38 2008 +0100
14950 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
14954 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
14956 Date: Wed Jan 9 17:10:56 2008 +0100
14958 Make bootretry work when command line editing is enabled
14960 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
14961 This patch fixes the problem.
14965 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
14967 Date: Fri Jan 11 23:26:18 2008 -0500
14969 Refactor code for "i2c sdram" command
14973 commit 0df6b8446c4721b91ce311548114891130371083
14975 Date: Thu Jan 10 22:23:39 2008 -0500
14977 Fix "i2c sdram" command for DDR2 DIMMs
14979 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
14980 "i2c sdram" command. This patch provides correct alternative
14981 interpretations when DDR2 memory is detected.
14985 commit 64134f011254123618798ff77c42ba196b2ec485
14987 Date: Sat Jan 12 20:31:39 2008 +0100
14989 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
14991 With recent toolchain versions, some boards would not build because
14992 or errors like this one (here for ocotea board when building with
14994 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
14996 For many boards, the .bss section is big enough that it wraps around
14997 at the end of the address space (0xFFFFFFFF), so the problem will not
14998 be visible unless you use a 64 bit tool chain for development. On
14999 some boards however, changes to the code size (due to different
15000 optimizations) we bail out with section overlaps like above.
15002 The fix is to add the NOLOAD attribute to the .bss and .sbss
15003 sections, telling the linker that .bss does not consume any space in
15008 commit 3afac79ec27b91df185f090b31dad9620779f440
15010 Date: Fri Jan 11 20:42:58 2008 -0600
15012 USB: Add Philips 1561 PCI-OHCI ids
15013 (needed for M5475EVB)
15017 commit 5e8def6731cd7bec74bff42a16b139de04010353
15019 Date: Sat Jan 12 15:51:34 2008 +0100
15021 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
15027 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
15029 Date: Fri Jan 11 12:03:43 2008 +0100
15031 MPC512X: Cleanup bus clock names.
15035 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
15037 Date: Tue Jan 8 17:16:59 2008 +0100
15039 MPC512X: Fixed typo in macro name.
15043 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
15045 Date: Tue Jan 8 17:16:15 2008 +0100
15047 ads5121: Added support for FDT.
15051 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
15053 Date: Sat Jan 12 01:05:50 2008 +0100
15055 Coding Style cleanup; update CHANGELOG.
15059 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
15061 Date: Fri Jan 11 15:15:17 2008 +0100
15063 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
15068 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
15070 Date: Fri Jan 11 15:15:16 2008 +0100
15072 MUNICes: Set the right CFG_DEFAULT_MBAR value.
15076 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
15078 Date: Fri Jan 11 15:15:15 2008 +0100
15080 added the config File for the MUNICes board.
15084 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
15086 Date: Fri Jan 11 15:15:14 2008 +0100
15088 added basic support for the MUNICes board.
15092 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
15094 Date: Sat Jan 12 00:39:37 2008 +0100
15096 Update CHANGELOG and MAINTAINERS files.
15100 commit 5ba7390c3cb579172be66888a371707b47b5be4e
15102 Date: Fri Jan 11 02:15:02 2008 +0100
15104 Fix compilation problem in common/cmd_bmp.c
15106 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
15107 isn't defined. This patch fix this.
15111 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
15113 Date: Fri Jan 11 01:12:09 2008 +0100
15115 Fix defaultconfig for the mgcoge board.
15119 commit ac9db066b26935f31bff15c98168b19faeb603f3
15121 Date: Fri Jan 11 01:12:08 2008 +0100
15123 Added support for the mgcoge board from keymile.
15127 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
15129 Date: Fri Jan 11 01:12:07 2008 +0100
15131 Enable SMC microcode relocation patch for SMC1.
15135 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
15137 Date: Fri Jan 11 01:12:06 2008 +0100
15139 Added support for the mgsuvd board from keymile.
15143 commit bf05293973b348f6946c9df92cd3c65ece42d0be
15145 Date: Thu Jan 10 16:02:07 2008 -0600
15147 Fix 64-bit vsprintf.
15149 There were some size and unsigned problems.
15150 Also add support for "ll" size modifier in format string like glibc
15155 commit 92fa37eac530860643afa26ae347af3d23d67309
15157 Date: Wed Jan 9 12:42:35 2008 -0500
15159 Remove superfluous preprocessor conditionals from LM73 driver
15161 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
15163 (2) Use conditional Makefile.o.
15167 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
15169 Date: Thu Jan 10 17:59:07 2008 +0100
15171 Add support for the TK885D baseboard from TELE-DATA
15173 The TK885D board uses a TQM885D module from TQ, this port adds an
15174 own configuration file and adds a last_stage_init() method to
15175 configure the two PHYs, depending on the phy_auto_nego environment
15180 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
15182 Date: Thu Jan 10 02:22:05 2008 -0600
15184 Fix compiler warning
15186 main.c: In function 'readline_into_buffer':
15187 main.c:927: warning: unused variable 'p_buf'
15191 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
15193 Date: Fri Jan 11 14:30:01 2008 +0100
15195 Add Fujitsu CoralP/Lime video driver
15200 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
15202 Date: Fri Jan 11 02:39:47 2008 +0100
15204 Fix video console newline and carriage return handling
15206 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
15207 are not displayed correctly. This is an attempt to fix
15208 this issue. Also add carriage return handling.
15213 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
15215 Date: Fri Jan 11 15:53:58 2008 +0100
15217 ppc4xx: Fix sdram init on Sequoia boards
15219 Clear possible errors in MCSR resulting from data-eye-search.
15220 If not done, then we could get an interrupt later on when
15221 exceptions are enabled.
15225 commit d610a60730b7464f6f659db49d264d89a7c71061
15227 Date: Fri Jan 11 15:31:09 2008 +0100
15229 ppc4xx: Rework Lime support for lwmon5
15231 Rework Lime support for lwmon5 using new video driver
15235 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
15237 Date: Fri Jan 11 14:55:16 2008 +0100
15239 ppc4xx: Update PMC440 config file
15243 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
15245 Date: Fri Jan 11 14:55:08 2008 +0100
15247 ppx4xx: Fix sdram init on PMC440 boards
15251 commit 061aad4d320dddce26247699dcf2875ee2ea1366
15253 Date: Thu Jan 10 23:09:33 2008 +0800
15255 mpc83xx: Fix the bug of 266MHz data rate DDR
15257 The DDR doesn't work on the 266MHz data rate,
15258 the patch fix the bug.
15263 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
15265 Date: Thu Jan 10 23:08:26 2008 +0800
15267 mpc83xx: Make the code more readable
15269 Format the code, make it more readable
15274 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
15276 Date: Thu Jan 10 23:07:23 2008 +0800
15278 mpc83xx: Reduce the latency of DDR
15280 Reduce the AL from 2 to 1 clock to improve the performance.
15285 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
15287 Date: Thu Jan 10 23:06:05 2008 +0800
15289 mpc83xx: Fix the wrong definition of MPC8315E
15291 According to the latest user manual of MPC8315E,
15292 1) The SVCOD of HRCWL is different than 837x
15293 2) The SCCR has changes
15298 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
15300 Date: Thu Jan 10 23:05:00 2008 +0800
15302 mpc83xx: Fix the typo in mpc83xx.h
15304 The SPCR about TSEC priority is wrong.
15311 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
15313 Date: Thu Jan 10 23:04:13 2008 +0800
15315 mpc83xx: Fix the typo in global data struct
15317 Fix the typo in global_data.h
15322 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
15324 Date: Thu Jan 10 23:03:03 2008 +0800
15326 mpc83xx: Remove cache config from config.h
15328 clean up the cache config from configs.h of board
15333 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
15335 Date: Wed Jan 9 20:57:47 2008 +0300
15337 mpc83xx: add support for the MPC8360E-RDK
15339 This is MPC8360E based board with:
15340 - 256MB fixed SDRAM;
15341 - 8MB Intel Strata NOR flash;
15342 - StMICRO 64MiB NAND flash;
15343 - two 10/100/1000 ethernet ports connected via Broadcom
15345 - two 10/100 ethernet ports connected via National
15347 - one PCI and one miniPCI slots;
15348 - four serial ports (two NS16550-compatible, two UCCs);
15349 - four USB ports working through MPC8360E "FHCI" USB controller;
15350 - Fujitsu MB86277 graphics controller;
15351 - Analog to Digital Converter/Touchscreen controller, AD7843
15354 Features not supported in this patch are:
15355 - StMICRO 64MiB NAND flash (patch sent);
15356 - MINT framebuffer initialization (patch is pending);
15357 - Fetching production information from the EEPROM via I2C;
15359 - Two slow UCCs used as RS-485 UARTs.
15364 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
15366 Date: Wed Jan 9 20:57:40 2008 +0300
15368 mpc83xx: add "fsl, qe" compatible fixups
15370 New device trees will use "fsl,qe" compatible properties.
15375 commit 977b57583a7c34010e566a09a679ec3c1836f996
15377 Date: Wed Jan 9 15:24:06 2008 -0600
15379 mpc83xx: add missing CONFIG_HAS_ETH0 defines
15381 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
15382 is defined; add the define to the missing board configs.
15384 Thanks to Emilian Medve for finding this.
15388 commit b830b7f1635984ba607219fcbd78597c28eeb529
15390 Date: Thu Jan 10 14:00:28 2008 -0600
15392 86xx: Support 2GB DIMMs
15394 Configure the number of bits used to address the banks inside the SDRAM
15395 device. The default register value of 0 means 2 bits to address 4 banks.
15396 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
15400 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
15402 Date: Thu Jan 10 18:50:33 2008 +0100
15404 ppc4xx: Make Sequoia boot vxWorks
15407 TLB 0 a entry for the Machine Check interrupt
15408 TLB 1 a entry for the RAM
15409 TLB 2 a entry for the EBC
15410 TLB 3 a entry for the boot flash
15412 After changing the baudrate to 9600 I had no problems to boot the
15413 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
15418 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
15420 Date: Wed Jan 9 23:10:27 2008 -0500
15422 ppc4xx: Fix dflush() to restore DVLIM register
15426 commit 252f60b068d1f94190b5bcfda169db582387e15e
15428 Date: Thu Jan 10 03:52:44 2008 -0500
15430 Nios2: remove common/cmd_bdinfo.c unused variable.
15435 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
15437 Date: Wed Jan 9 18:15:53 2008 -0500
15439 Fix Ethernet init() return codes
15441 Change return values of init() functions in all Ethernet drivers to conform
15447 All drivers going forward should return 0 on success. Current drivers that
15448 return 1 on success were left as-is to minimize changes.
15457 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
15459 Date: Thu Jan 10 00:55:14 2008 +0100
15461 Coding Style cleanup; update CHANGELOG
15465 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
15467 Date: Wed Jan 9 16:56:54 2008 -0600
15469 Add QE brg freq and correct qe bus freq fdt update code
15474 commit 890dfef06c2d169a3356359596890754dfb8ee1c
15476 Date: Wed Jan 9 16:34:51 2008 -0600
15478 Remove cache config from ATUM8548 and sbc8548 configs
15480 These boards weren't updated by Kumar's config patch because they
15481 weren't in the tree, yet.
15485 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
15487 Date: Mon Jan 7 13:31:19 2008 -0600
15489 85xx: add ability to upload QE firmware
15491 Define the layout of a binary blob that contains a QE firmware and instructions
15492 on how to upload it. Add function qe_upload_firmware() to parse the blob and
15493 perform the actual upload. Add command-line command "qe fw" to take a firmware
15494 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
15495 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
15496 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
15500 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
15502 Date: Tue Jan 8 01:22:21 2008 -0600
15504 85xx: Remove cache config from configs.h
15506 Either use the standard defines in asm/cache.h or grab the information
15507 at runtime from the L1CFG SPR.
15509 Also, minor cleanup in cache.h to make the code a bit more readable.
15513 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
15515 Date: Fri Dec 21 10:39:27 2007 -0500
15517 mpc85xx: Add support for ATUM8548 (updated)
15519 Add support for Instituto Atlantico's ATUM8548 board
15524 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
15526 Date: Fri Dec 21 10:36:37 2007 -0500
15528 mpc85xx: Add support for ATUM8548 (updated)
15530 Add support for Instituto Atlantico's ATUM8548 board
15534 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
15536 Date: Thu Dec 13 06:45:14 2007 -0600
15538 mpc85xx: Add support for SBC8548 (updated)
15540 Add support for Wind River's SBC8548 reference board.
15544 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
15546 Date: Thu Dec 13 06:45:08 2007 -0600
15548 mpc85xx: Add support for SBC8548 (updated)
15550 Add support for Wind River's SBC8548 reference board.
15555 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
15557 Date: Mon Oct 22 19:58:19 2007 +0400
15559 MPC8568E-MDS: set up QE pario for UART1
15561 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
15562 be set up appropriately.
15566 commit ad162249cb371e9e38971676f09be791e5f3cf4a
15568 Date: Mon Oct 22 18:12:46 2007 +0400
15570 MPC8568E-MDS: reset UCCs to use them reliably
15572 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
15575 p.s Similar code exists in the Linux kernel board file (for capability
15576 reasons with older U-Boots), but should be removed some day.
15580 commit 2146cf56821c3364786ca94a7306008c5824b238
15582 Date: Wed Dec 19 01:18:15 2007 -0600
15584 Reworked FSL Book-E TLB macros to be more readable
15586 The old macros made it difficult to know what WIMGE and perm bits
15587 were set for a TLB entry. Actually use the bit masks for these items
15588 since they are only a single bit.
15590 Also moved the macros into mmu.h out of e500.h since they aren't specific
15595 commit 1d47273d46925929f8f2c1913cd96d7257aade88
15597 Date: Tue Dec 18 23:21:51 2007 -0600
15599 Use FSL Book-E MMU macros from Linux Kernel
15601 Grab the FSL Book-E MAS register macros from Linux. Also added
15602 defines for page sizes up to 4TB and removed SHAREN since it doesnt
15607 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
15609 Date: Wed Jan 9 13:51:32 2008 -0600
15611 Fix my own merge stupidity
15613 Way back in August I merged Heiko's patch:
15614 566a494f592: [PCS440EP] upgrade the PCS440EP board
15616 with Jon's CONFIG_COMMANDS patches.
15618 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
15620 However, in the process, I left out some of Heiko's good changes.
15622 Now Heiko's and Jon's patches are properly merged in fat_register_device()
15626 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
15628 Date: Wed Jan 9 11:17:49 2008 -0600
15630 Expose parse_line() globally.
15632 Add new function readline_into_buffer() that allows the
15633 output of readline to be put into a pointer to char buffer.
15635 This refactoring allows other functions besides the
15636 main command loop to also use the same input mechanism.
15641 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
15643 Date: Wed Jan 9 01:15:25 2008 +0100
15645 trivial: fix consequences of a bad merge
15647 Fix what looks like a merge artifact.
15651 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
15653 Date: Thu Jan 3 10:51:15 2008 +0800
15655 Add Ctrl combo key support to usb keyboard driver.
15657 Ctrl combo key support is added, which is very useful to input Ctrl-C
15658 for interrupt current job.
15659 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
15660 key input when tstc() is called.
15664 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
15666 Date: Sun Dec 30 03:30:56 2007 +0100
15668 fix various comments
15672 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
15674 Date: Sun Dec 30 03:30:46 2007 +0100
15676 fix comments with new drivers organization
15680 commit a9b410dc7d2a4721c408b13abfc037988150f145
15682 Date: Fri Dec 28 12:50:59 2007 +0900
15684 Remove the obsolete terse version of do_mii()
15686 We now have more useful version of do_mii() and everybody use it.
15687 Gerald Van Baren says:
15689 > When I originally wrote the mii command 6(!) years ago, I wrote a
15690 > verbose version that printed human readable decomposition of the flags,
15691 > etc., and a terse one that didn't print as much stuff and thus had a
15692 > smaller memory footprint.
15694 > It sounds like the terse version has withered and died, apparently
15695 > people are only using the verbose version (which is very understandable,
15701 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
15703 Date: Thu Dec 27 13:42:56 2007 -0500
15705 Do not reference sha1.c when building mkimage.
15707 remove sha1.o from mkimage linking since it isn't actually used.
15711 commit b9173af73e524d37c812f210173cf83385c5171a
15713 Date: Thu Dec 27 15:39:54 2007 +0900
15715 common/cmd_mii.c: Add sanity argc check
15717 If type mii command without arguments, we suffer from uninitialized argv[]
15718 entries; for example we MIPS get stuck by TLB error.
15722 commit 500856eb1707ed17d9204baa61dd59948d3b2899
15724 Date: Wed Jan 9 19:39:36 2008 +0100
15726 API for external applications.
15728 This is an API for external (standalone) applications running on top of
15729 U-Boot, and is meant to be more extensible and robust than the existing
15730 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
15733 Included is the demo application using this new framework (api_examples).
15735 Please note this is still an experimental feature, and is turned off by
15740 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
15742 Date: Wed Jan 9 12:14:55 2008 -0600
15744 86xx: Remove cache config from configs.h
15746 Just use the standard defines in asm/cache.h.
15750 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
15752 Date: Wed Jan 9 18:05:27 2008 +0100
15754 Globalize envmatch()
15756 The newly introduced API (routines related to env vars) will need to call
15761 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
15763 Date: Fri Jan 4 12:07:27 2008 -0600
15765 Convert MPC8610HPCD to use libfdt.
15767 Assumes the presence of the aliases node in the DTS to
15768 locate the pci and serial nodes for fixups.
15770 Use consistent fdtaddr and fdtfile in environment variables.
15774 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
15776 Date: Fri Jan 4 11:58:23 2008 -0600
15778 8610: Fix lingering compile warnings.
15784 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
15786 Date: Wed Jan 9 15:14:46 2008 +0100
15788 Coding Style cleanup, update CHANGELOG
15792 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
15794 Date: Tue Dec 18 04:29:55 2007 -0500
15796 fix easylogo on big endian dev systems
15798 didnt realize how out of shape easylogo actually was until i tried using it.
15799 this patch does byte swapping as need be on the input tga header since the tga
15800 is in little endian but the host could just as well be big endian. i didnt
15801 bother using bswap macros or such stuff from system headers as nothing in
15802 POSIX dictates byte swapping functionality.
15806 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
15808 Date: Tue Dec 18 03:23:25 2007 -0500
15812 - make the Makefile not suck
15813 - include proper headers for prototypes
15814 - fix obvious broken handling of strchr() when handling '.' in filenames
15818 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
15820 Date: Thu Dec 13 21:23:28 2007 -0500
15822 Fix build problems under Cygwin
15824 This patch allows u-boot to build without error in a cygwin
15825 environment. Cygwin does not define __u64 in it's
15826 include/asm/types.h file. The -idirafter flag in the u-boot
15827 build causes the inclusion of the cygwin types.h file as opposed
15828 to u-bot/include/asm/types.h file which does define __u64.
15829 Subsequently, sha1.c compile fails due to unknown symbol.
15833 commit 43ef1c381f9195504a2488f5cb909227eb97d475
15835 Date: Fri Nov 30 17:29:59 2007 +0100
15837 cmd_bmp: Add support for displaying gzip compressed bmps
15839 The existing code can show information about a gzip compressed BMP
15840 image, but can't actually display it.
15842 Therefore, move the decompression code out of bmp_info() and use it in
15843 bmp_display() as well in order to display a compressed BMP image.
15845 Also, clean things up a bit and fix a memory leak while we're at it.
15850 commit d197ffd8172c6fdef38733424640a9a47295d6e9
15852 Date: Thu Nov 29 21:15:56 2007 +0100
15854 Fix and optimize MII operations on FEC (MPC8xx) controllers
15856 This patch fixes several issues at least on a MPC885 based system with two
15857 FEC interfaces used in MII mode.
15859 1. PHY discovery should first read PHY_PHYIDR2 register and only then
15860 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
15861 otherwise the values read are wrong. Also notice, that PHY discovery
15862 cannot work on MPC88x / MPC87x in setups with both FECs active at all
15863 in its present form, because for both interfaces the registers from FEC
15864 1 are used to communicate over MII.
15866 2. Remove code duplication for resetting the FEC by isolating it into a
15869 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
15871 4. Optimize mii_init() to only reset the FEC 1 controller once.
15873 5. Fix a typo in mii_init() using index i instead of j thus potentially
15874 leading to unpredictable results.
15878 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
15880 Date: Tue Nov 20 13:14:20 2007 +0100
15882 Fix endianness conversions in rtl8169 driver
15884 It is unclear on what platforms this driver has been tested, since
15885 noone up to now defines CONFIG_RTL8169 in the board configuration
15886 header. Now it has been fixed for a big-endian mpc8241 based
15887 linkstation platform. This patch presents the necessary endianness
15892 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
15894 Date: Thu Jan 3 10:51:15 2008 +0800
15896 Add Ctrl combo key support to usb keyboard driver.
15898 Ctrl combo key support is added, which is very useful to input Ctrl-C
15899 for interrupt current job.
15900 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
15901 key input when tstc() is called.
15906 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
15908 Date: Wed Jan 9 13:43:38 2008 +0100
15910 Coding Style clenaup; update CHANGELOG
15914 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
15916 Date: Thu Dec 27 17:13:11 2007 +0100
15918 Remove bit swapping in Xilinx Spartan bitfile loading
15920 This patch removes the unnecessary bit swapping when
15921 booting .bit files with the 'fpga loadb' command.
15925 commit 437fc7327f0611f82937858f2d80e4cd61b40984
15927 Date: Thu Dec 27 17:13:05 2007 +0100
15929 Fix MSB check in Xilinx Spartan slave serial mode
15933 commit 3bff4ffa33729a42645e328a21e8d16488872958
15935 Date: Thu Dec 27 17:12:56 2007 +0100
15937 Add new Xilinx Spartan FPGA types
15941 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
15943 Date: Thu Dec 27 17:12:43 2007 +0100
15945 Add pre and post configuration callbacks for Spartan FPGAs
15947 This patch adds a post configuration callback for Spartan2/3 FPGAs.
15948 pre and post configuration callback are now optional and
15949 not called when the function pointer is set to NULL.
15953 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
15955 Date: Thu Dec 27 17:12:34 2007 +0100
15957 Improve configuration of FPGA subsystem
15959 This patch removes the FPGA subsystem configuration through
15960 the CONFIG_FPGA bitmask configuration option.
15962 See README for the new options:
15965 CONFIG_FPGA_<vendor>,
15966 CONFIG_FPGA_<family>
15970 commit 95c6bc7d4a3588b452baca610f8c795a83630477
15972 Date: Thu Dec 27 16:55:17 2007 +0100
15974 Add Epson RX8025 RTC support
15978 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
15980 Date: Thu Dec 27 16:57:23 2007 +0100
15982 serial: Make default_serial_console() a weak function
15984 With this patch it is possible to reimplement default_serial_console()
15985 in board specific code. This will be done in the upcomming PMC440
15986 U-Boot port. This also allows the lwmon board maintainer to
15987 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
15991 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
15993 Date: Wed Dec 19 14:14:47 2007 +0100
15995 add 'terminal program' functionality
15997 This patch adds a 'cu' like serial terminal command to u-boot
15998 using which you can access other serial ports from the system console.
16000 OpenMoko uses this in their Neo1973 phones to get access to the GSM
16001 Modem and GPS chip from the bootloader.
16005 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
16007 Date: Wed Dec 19 14:12:53 2007 +0100
16009 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
16010 that used to exist with the legacy NAND code
16014 commit f540c42d9564854b19ce9bbb70affe172529fe70
16016 Date: Wed Dec 19 14:09:58 2007 +0100
16018 Fix building with CRAMFS but not JFFS2 support
16022 commit 23d0baf967fecdaf1804f045f6339337c5607eec
16024 Date: Sat Dec 22 15:52:58 2007 +0100
16026 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
16031 commit 23776ff292966a85d811126933830bed48211826
16033 Date: Tue Dec 11 10:53:12 2007 +0100
16035 ARM: support board-specific ethernet PHY init
16037 Add until the new phylib will be arrived
16041 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
16043 Date: Sat Dec 8 16:34:08 2007 +0100
16045 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
16049 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
16051 Date: Sun Dec 9 11:01:10 2007 +0100
16053 Add missing file in gitignore and comments
16055 based on Linux source tree's .gitignore files
16059 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
16061 Date: Wed Jan 9 11:36:21 2008 +0100
16063 Coding Style cleanup, update CHANGELOG
16067 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
16069 Date: Wed Jan 9 10:38:58 2008 +0100
16071 POST: Execute SPR test after relocation
16073 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
16074 self modifying code and this doesn't work with stack in d-cache, since
16075 I can't move the code from d-cache to i-cache. We move the SPR test to
16076 be executed a little later, after relocation. Then stack is located in
16077 SDRAM and this self-modifying code is no problem anymore.
16081 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
16083 Date: Wed Jan 9 10:28:20 2008 +0100
16085 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
16087 This patch configures the LWMON5 port to use d-cache as init-ram and
16088 the unused GPT0_COMP6 as POST WORD storage.
16092 commit 1754f50b710194f886b6f2831803d8960171a14d
16094 Date: Wed Jan 9 10:25:46 2008 +0100
16096 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
16098 The privious 4xx POST implementation only supported storing the POST
16099 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
16100 we need to store the POST WORD in some other non volatile location.
16101 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
16106 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
16108 Date: Wed Jan 9 10:23:16 2008 +0100
16110 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
16112 This patch adds support for locking the init-ram/stack in d-cache,
16113 so that other regions may use d-cache as well
16115 Note, that this current implementation locks exactly 4k of d-cache,
16116 so please make sure that you don't define a bigger init-ram area. Take
16117 a look at the lwmon5 440EPx implementation as a reference.
16121 commit 0ddb89601a8d29e808db450366752ffdc6267c53
16123 Date: Wed Jan 9 10:16:33 2008 +0100
16125 Fix memset bug in ext2fs_read_file()
16127 ext2fs_read_file() had the function arguments swapped.
16129 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
16133 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
16135 Date: Tue Jan 5 08:17:15 1988 +0100
16137 Fix problems with usb storage devices on MPC5200 /TQM5200
16139 The MPC5200 OHCI controller operates in big endian, so
16140 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
16144 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
16146 Date: Tue Jan 8 22:58:27 2008 +0100
16148 Fix compile problem with new env code.
16152 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
16154 Date: Tue Nov 27 10:23:20 2007 +0100
16156 tools: fix fw_printenv tool to compile again
16158 This patch updates the fw_printenv/fw_setenv userspace tool to include
16159 the correct MTD header in order to compile against current kernel
16160 headers. Backward compatibility is preserved by introducing an option
16161 MTD_VERSION which can be set to "old" for compilation using the old MTD
16162 headers. Along with this a number of warnings are fixed.
16166 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
16168 Date: Tue Jan 8 15:40:09 2008 +0100
16170 ppc4xx: assign PCI interrupts on seuqoia boards
16172 Some operating systems rely on assigned PCI interrupts.
16176 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
16178 Date: Tue Jan 8 15:50:49 2008 +0100
16180 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
16182 This patch allows the use of 4xx interrupt vector number defines
16183 in board specific code outside cpu/ppc4xx.
16187 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
16189 Date: Tue Jan 8 15:39:01 2008 +0100
16191 ppc4xx: Fix UIC2 vector number base
16195 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
16197 Date: Tue Jan 8 12:49:58 2008 +0100
16199 ppc4xx: Update PLB/PCI divider for PMC440 board
16201 This patch updates the PLB/PCI divider when running at
16202 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
16206 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
16208 Date: Tue Jan 8 11:13:09 2008 +0100
16210 ppc4xx: Disable error message when no NAND chip is installed on PMC440
16212 Add CFG_NAND_QUIET_TEST option to disable error message when
16213 no NAND chip is installed on PMC440 boards.
16215 Disable a couple of config defines that are only used for NAND_U_BOOT.
16219 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
16221 Date: Tue Jan 8 22:58:27 2008 +0100
16223 Fix compile problem with new env code.
16227 commit 6de66b35426312a21174a9bf0576a094e2904bea
16229 Date: Tue Nov 27 10:23:20 2007 +0100
16231 tools: fix fw_printenv tool to compile again
16233 This patch updates the fw_printenv/fw_setenv userspace tool to include
16234 the correct MTD header in order to compile against current kernel
16235 headers. Backward compatibility is preserved by introducing an option
16236 MTD_VERSION which can be set to "old" for compilation using the old MTD
16237 headers. Along with this a number of warnings are fixed.
16241 commit ad3006fe7e84667021753b74247b0bafd97ba35f
16243 Date: Mon Jan 7 23:47:32 2008 -0500
16245 LIBFDT: use memmove() instead of memcpy()
16247 This is partial patch from the DTC/libfdt
16248 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
16250 Date: Wed Nov 21 11:56:14 2007 +1100
16252 The patch also fixes one genuine bug caught by valgrind -
16253 _packblocks() in fdt_rw.c was using memcpy() where it should have been
16258 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
16260 Date: Mon Dec 17 14:42:07 2007 +1100
16262 libfdt: Add more documentation (patch the seventh)
16264 This patch adds more documenting comments to libfdt.h. Specifically,
16265 these document the read/write functions (not including fdt_open_into()
16266 and fdt_pack(), for now).
16270 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
16272 Date: Mon Dec 17 14:41:52 2007 +1100
16274 libfdt: Add more documentation (patch the sixth)
16276 This patch adds some more documenting comments to libfdt.h.
16277 Specifically this documents all the write-in-place functions.
16281 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
16283 Date: Sat Dec 29 22:45:27 2007 -0500
16285 Fine grained per property /chosen updating.
16287 Implement a suggestion by Scott Wood to make the /chosen handling fine
16288 grained. Don't overwrite pre-existing properties on a per-property basis,
16289 so if /chosen exists but a necessary /chosen/property doesn't, it gets
16290 created. If a /chosen property exists, it is NOT overwritten unless the
16291 "force" flag is true.
16295 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
16297 Date: Sat Jan 5 15:33:29 2008 -0500
16299 Improve the FDT help message.
16301 Add a note that "fdt copy" makes the new address active.
16302 Remove most of the extra hints at the end of the fdt help.
16306 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
16308 Date: Sat Jan 5 14:52:04 2008 -0500
16310 Support setting FDT properties with optional values.
16312 Fix a bug found and documented by Bartlomiej Sieka where the optional
16313 value on "fdt set <path> <prop> [<val>]" wasn't optional.
16315 => fdt mknode / testnode
16316 => fdt print /testnode
16319 => fdt set /testnode testprop
16320 => fdt print /testnode
16327 commit 22fb2246df91bfc840d87f0c5910818bad55577a
16329 Date: Fri Dec 28 11:56:30 2007 +0100
16331 Add fdt_find_and_setprop() to fdt_support.h
16333 fdt_find_and_setprop() is used by several 4xx boards and it's
16334 missing in the appropriate header. This patch eliminates a
16335 warning when building U-Boot for such boards.
16340 commit 802b769bac17b0560d3535a42c502469ee190cd1
16342 Date: Tue Jan 8 18:39:30 2008 +0100
16344 ppc4xx: Return 0 on success in 4xx ethernet driver
16348 commit 6775c68683a53c7abc778774641aac6f833a2cbf
16350 Date: Tue Jan 8 09:59:49 2008 -0600
16352 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
16356 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
16358 Date: Thu Dec 20 16:28:34 2007 -0600
16360 mpc83xx: rm remaining FLAT_TREE code
16362 ..in board pci.c files
16366 commit b3458d2cd55d01732e30a76d898afd99e871cd67
16368 Date: Thu Dec 20 15:57:28 2007 -0600
16370 mpc83xx: remove FLAT_TREE code
16372 need to rm it from pci code, too!
16376 commit 5b8bc606c61456566af6912f818a153b6b06f242
16378 Date: Thu Dec 20 14:09:22 2007 -0600
16380 mpc83xx: convert to using do_fixup_*()
16382 convert to using simpler mpc85xx style fdt update code; streamline by
16383 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
16384 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
16385 converted over to using libfdt).
16389 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
16391 Date: Thu Dec 20 12:58:51 2007 -0500
16393 sbc8349: enable libfdt by default on WRS SBC8349 board.
16395 Make libfdt the default for the WRS SBC8349 board.
16396 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
16397 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
16401 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
16403 Date: Thu Dec 20 12:58:16 2007 -0500
16405 sbc8349: migrate board to libfdt
16407 This adds libfdt support code for the Wind River sbc8349 board.
16409 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
16410 the other Freescale 83xx boards.
16414 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
16416 Date: Thu Dec 20 12:56:19 2007 -0500
16418 sbc8349: Remove board specific ECC code
16420 ECC code is now shared for all 83xx boards, so remove board specific one.
16421 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
16425 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
16427 Date: Thu Dec 20 01:30:48 2007 -0600
16429 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
16431 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
16435 commit ccf21c311e68d48399eff1e72936052885f6e3f7
16437 Date: Thu Dec 6 16:43:40 2007 +0100
16439 Add support CONFIG_UEC_ETH3 in MPC83xx
16443 commit e6af9932d31171e35db880e7b2f29f903b1b7660
16445 Date: Mon Nov 26 11:00:54 2007 -0600
16447 Remove CONFIG options related to OF that we dont use
16449 The MPC8360E MDS config defined:
16451 CONFIG_OF_HAS_UBOOT_ENV
16453 Which we don't use or ever needed. This seems like copy-paste feature creep.
16457 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
16459 Date: Mon Dec 10 14:16:22 2007 -0600
16461 mpc83xx: supress compiler warning
16463 mpc8360emds.c: In function ‘ft_board_setup’:
16464 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
16465 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
16469 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
16471 Date: Tue Nov 27 14:17:29 2007 -0600
16473 mpc83xx: fix remaining fdt_find_node_by_path references
16475 rename to fdt_path_offset
16479 commit 921d4b19ad1be704df58725485d9292dc0414adf
16481 Date: Mon Nov 19 12:30:09 2007 -0600
16483 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
16485 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
16486 This change guarantees that the environment will be located on the
16487 first flash sector after the U-Boot image.
16491 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
16493 Date: Fri Nov 9 14:28:08 2007 -0600
16495 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
16497 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
16498 properties in the device tree so the PHY gets configured for internal delay on
16499 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
16503 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
16505 Date: Tue Sep 18 12:41:15 2007 +0800
16507 mpc83xx: update the CREDITS and MAINTAINERS
16509 update the CREDITS and MAINTAINERS.
16513 commit b21add4b42af7b767448251b599b91066a160e0d
16515 Date: Tue Sep 18 12:40:21 2007 +0800
16517 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
16519 Add the MAINTAINER and MAKEALL entries for mpc837xemds
16523 commit f8900ce9094c462355eb792eea264ff16ac8fd16
16525 Date: Tue Sep 18 12:38:53 2007 +0800
16527 mpc83xx: Add the MPC837xEMDS board readme
16529 Add the README.mpc837xemds to /doc
16533 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
16535 Date: Tue Sep 18 12:37:57 2007 +0800
16537 mpc83xx: Add the support of MPC837xEMDS board
16539 The MPC837xEMDS board support:
16540 * DDR2 400MHz hardcoded and SPD init
16541 * Local bus NOR Flash
16542 * I2C, UART, MII and RTC
16548 commit 555da61702771fe0f76f3de23b4e7590f3704161
16550 Date: Tue Sep 18 12:36:58 2007 +0800
16552 mpc83xx: Add the support of MPC8315E SoC
16554 The MPC8315E SoC including e300c3 core and new IP blocks,
16555 such as TDM, PCI Express and SATA controller.
16559 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
16561 Date: Tue Sep 18 12:36:11 2007 +0800
16563 mpc83xx: Add the support of MPC837x SoC
16565 The MPC837x SoC including e300c4 core and new IP blocks,
16566 such as SDHC, PCI Express and SATA controller.
16570 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
16572 Date: Wed Nov 14 18:54:53 2007 +0300
16574 MPC8360E-MDS: configure and enable second UART
16576 Despite user manual, BCSR9.7 is negated (high) on HRST, so
16577 UART2 is disabled. Fix that and configure QE pins properly.
16581 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
16583 Date: Mon Nov 5 09:34:06 2007 -0600
16585 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
16587 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
16588 currently-defined 83xx boards. This change guarantees that the environment
16589 will be located on the first flash sector after the U-Boot image.
16594 commit e05329516a13616b53240cd85b739217c2bf87f1
16596 Date: Fri Jan 4 13:27:02 2008 -0500
16598 ppc4xx: Remove weak binding from common Denali data-eye search code
16600 Now that there are no board-specific versions of
16601 "denali_core_search_data_eye()", the weak binding on the common version
16606 commit 5ba576c01602fd328800a427964c36a0a05c5dce
16608 Date: Sat Jan 5 09:13:46 2008 +0100
16610 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
16614 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
16616 Date: Sat Jan 5 09:12:41 2008 +0100
16618 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
16620 On Katmai the complete auto-calibration somehow doesn't seem to
16621 produce the best results, meaning optimal values for RQFD/RFFD.
16622 This was discovered by GDA using a high bandwidth scope,
16623 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
16624 so now on Katmai "only" RFFD is auto-calibrated.
16626 This patch also adds RDCC calibration as mentioned on page 7 of
16627 the AMCC PowerPC440SP/SPe DDR2 application note:
16628 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
16632 commit 49db47b8ae6afff2b898be312948ff501357dc80
16634 Date: Wed Jan 2 16:48:42 2008 +0100
16636 ppc4xx: Remove sdram.h from PMC440 board
16640 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
16642 Date: Wed Jan 2 16:48:34 2008 +0100
16644 ppc4xx: use common denali core defines and data eye search code for PMC440
16648 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
16650 Date: Wed Jan 2 12:05:14 2008 +0100
16652 ppc4xx: More cleanup for esd's LCD code
16656 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
16658 Date: Fri Jan 4 12:00:01 2008 +0100
16660 ppc4xx: Fix Sequoia NAND booting target
16662 The Sequoia NAND booting target now uses the recently extracted
16663 cpu/ppc4xx/denali_data_eye.c file too.
16667 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
16669 Date: Thu Jan 3 15:02:02 2008 -0500
16671 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
16675 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
16677 Date: Fri Jan 4 02:11:56 2008 -0500
16679 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
16681 Note: this patch changes the configuration of some GPIO registers:
16683 Register Old Value New Value
16684 --------------- ---------- ----------
16685 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
16686 DCR GPIO0_TSRH 0x55005000 0x00000000
16687 DCR GPIO1_TCR 0xC2000000 0xE2000000
16688 DCR GPIO1_TSRL 0x0C000000 0x00200000
16689 DCR GPIO1_ISR2L 0x00050000 0x00110000
16693 commit 5ab884b254ca2e707ab50545cd705f30108cf491
16695 Date: Thu Jan 3 18:54:00 2008 -0500
16697 ppc4xx: Add functionality to GPIO support
16699 This patch makes two additions to GPIO support:
16701 First, it adds function gpio_read_in_bit() to read the a bit from the
16702 GPIO Input Register (GPIOx_IR) in the same way that function
16703 gpio_read_out_bit() reads a bit from the GPIO Output Register
16706 Second, it modifies function gpio_set_chip_configuration() to provide
16707 an additional option for configuring the GPIO from the
16708 "CFG_4xx_GPIO_TABLE".
16710 According to the 440EPx User's Manual, when an alternate output is used,
16711 the three-state control is configured in one of two ways, depending on
16712 the particular output. The first option is to select the corresponding
16713 alternate three-state control in the GPIOx_TRSH/L registers. The second
16714 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
16715 the GPIOx_TRSH/L registers, and set the corresponding bit in the
16716 GPIOx_TCR register to enable the output. For example, the Manual
16717 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
16718 the alternate three-state control (first option), and specifies
16719 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
16720 enabled in the GPIOx_TCR register (second option).
16722 Currently, gpio_set_chip_configuration() configures all alternate signal
16723 outputs to use the first option. This patch allow the second option to
16724 be selected by setting the "out_val" element in the table entry to
16725 "GPIO_OUT_1". The first option is used when the "out_val" element is
16726 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
16727 alternate signal is selected, and because all current GPIO tables set
16728 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
16729 not change any existing configurations.
16733 commit 196404cdc1de495d6182e84731c200fc5748df15
16735 Date: Sun Dec 30 01:01:54 2007 -0500
16737 PPC4xx: Remove sdram.h from board/lwmon5
16739 These definitions are now in "include/ppc440.h".
16743 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
16745 Date: Sun Dec 30 01:01:32 2007 -0500
16747 PPC4xx: Use common code for LWMON5 board SDRAM support
16749 This patch also modifies the functionality of the code so that the data-eye
16750 search is now done with with the cache disabled.
16754 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
16756 Date: Sun Dec 30 01:01:14 2007 -0500
16758 PPC4xx: Remove sdram.h from board/amcc/sequoia
16760 These definitions are now in "include/ppc440.h".
16764 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
16766 Date: Sun Dec 30 01:00:50 2007 -0500
16768 PPC4xx: Use common code for Sequoia board SDRAM support
16772 commit 8b0c5c127690335758100c25eaec2b84db97c101
16774 Date: Thu Dec 27 16:58:41 2007 +0100
16776 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
16778 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
16779 networking stack does not automatically switch to
16780 another interface. This patch does not touch the default
16786 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
16788 Date: Thu Nov 29 12:16:13 2007 +0530
16790 NET: Proper return code handling in eth_init() function in file eth.c
16792 This patch modifies the return code handling in the eth_init()
16793 function, to be compatible with the handling of the return codes in
16794 the other network stack files. It now returns a 0 on Success and -1 on
16800 commit 5ca2d0953e4579a80810966cca2077e20d912c97
16802 Date: Mon Nov 19 20:27:04 2007 +0900
16804 net/eth.c: Fix env_enetaddr signed overflow
16806 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
16809 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
16817 Warning: NEC-Candy MAC addresses don't match:
16818 Address in SROM is 00:00:4C:80:92:A2
16819 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
16821 This patch changes env_enetaddr type from `char' to `unsigned char'.
16827 commit f85b60710571b37293d2233933b76e2aa3db5635
16829 Date: Thu Dec 27 18:19:02 2007 +0100
16831 Introduce new eth_receive routine
16833 The purpose of this routine is receiving a single network frame, outside of
16834 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
16835 U-Boot will let them utilise networking facilities. For sending a raw frame
16836 the already existing eth_send() can be used.
16838 The direct consumer of this routine is the newly introduced API layer for
16839 external applications (enabled with CONFIG_API).
16845 commit 5c740711f0ea5b51414b341b71597c4a0751be74
16847 Date: Thu Jan 3 10:41:04 2008 -0600
16849 8610: Move include of config.h earlier.
16851 Include config.h earlier in the set of #includes
16852 so as to avoid a incidental and duplicate definition
16853 of CFG_CACHELINE_SIZE.
16855 Signed-off-by: Jon Loeliger
16857 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
16859 Date: Tue Dec 4 10:53:34 2007 -0600
16861 Don't slam #undef DEBUG in the 8641HPCN config file.
16863 Doing so prevents it from being individually set
16864 and useful in other files.
16868 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
16870 Date: Wed Nov 28 14:47:18 2007 -0600
16872 Convert MPC8641HPCN to use libfdt.
16874 Assumes the presence of the aliases node in the DTS to
16875 locate the ethernet, pci and serial nodes for fixups.
16877 Use consistent fdtaddr and fdtfile in environment variables.
16881 commit ce37422d0002e10490e268392e0c4e3028e52cec
16883 Date: Wed Jan 2 14:06:26 2008 +0100
16885 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
16887 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
16888 flash chips connected to a 32bit wide port.
16892 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
16894 Date: Wed Jan 2 15:58:44 2008 +0100
16896 Fix compile problem introduced by "cleanup" commit 3dfd708c
16900 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
16902 Date: Wed Jan 2 15:54:45 2008 +0100
16904 Make scripts and Makefiles POSIX compliant
16906 The bash builtin versions of the "test" (resp. "[") command allow
16907 using "==" for string comparisons, but POSIX compatible implemen-
16908 tations (like /usr/bin/test) insist on using "=" only. On such systems
16911 $ /usr/bin/test a == a && echo OK
16912 /usr/bin/test: ==: binary operator expected
16914 This patch fixes Makefiles and scripts to use POSIX style.
16918 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
16920 Date: Wed Jan 2 14:05:37 2008 +0100
16922 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
16924 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
16925 flash chips connected to a 32bit wide port.
16929 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
16931 Date: Wed Jan 2 12:38:43 2008 +0100
16933 Minor coding style cleanup.
16937 commit e174ac34adf5d5653df12bc3cf19c52063a71269
16939 Date: Fri Dec 28 17:29:56 2007 +0100
16941 ppc4xx: Coding style cleanup
16945 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
16947 Date: Fri Dec 28 17:07:24 2007 +0100
16949 ppc4xx: Complete PMC440 board support
16951 This patch brings the PMC440 board configuration file.
16952 Finally it enables the PMC440 board support.
16956 commit 407843a582560fc5231299561ab3c2b6b6cd3397
16958 Date: Fri Dec 28 17:07:18 2007 +0100
16960 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
16962 This patch adds some BSP commands and FPGA booting support
16963 for esd's PMC440 boards.
16967 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
16969 Date: Fri Dec 28 17:07:14 2007 +0100
16971 ppc4xx: Add initial esd PMC440 board files
16973 This patch adds the first files for the new esd PMC440 boards.
16974 The next two patches will complete the PMC440 board support.
16978 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
16980 Date: Fri Dec 28 17:10:36 2007 +0100
16982 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
16984 - add EEPROM write protection for esd PLU405 boards.
16985 - initialize NAND GPIOs
16986 - use correct io accessors
16991 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
16993 Date: Fri Dec 28 17:10:44 2007 +0100
16995 ppc4xx: use correct io accessors for esd's LCD code
16997 This patch fixes esd's LCD dectection code to work correctly with
16998 newer gcc versions.
17002 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
17004 Date: Fri Dec 28 17:10:42 2007 +0100
17006 ppc4xx: Maintenance patch for VOH405 boards
17008 - add EEPROM write protection
17009 - initialize NAND GPIOs
17010 - use correct io accessors
17011 - slow down I2C clock to 100kHz
17012 - enable ext. I2C bus
17017 commit c05569066dbcba3fdf36d4d1943df265dc316a86
17019 Date: Fri Dec 28 16:08:08 2007 +0100
17021 ppc4xx: Enable 405EP PCI arbiter per default on all boards
17023 In an attmemt to clean up the 4xx start.S file, I removed the enabling
17024 of the internal 405EP PCI arbiter. This is needed for multiple other
17025 405EP platforms, like most of the esd 405EP. Now the internal PCI
17026 arbiter is enabled again per default as it has been before.
17031 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
17033 Date: Fri Dec 28 15:53:46 2007 +0100
17035 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
17040 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
17042 Date: Fri Dec 28 06:06:04 2007 +0100
17044 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
17046 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
17047 platforms mentioned above.
17051 commit b568fd25574181a3b12ae3d66b2913903442cb83
17053 Date: Thu Dec 27 17:03:46 2007 +0100
17055 Remove CPCI440 board
17057 This board never left prototyping state and it
17058 became a millstone round my neck. So remove it.
17062 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
17064 Date: Thu Dec 27 11:28:51 2007 -0500
17066 Add support for Korat PPC440EPx board
17068 These patches add support for the PPC440EPx-based "Korat" board to
17069 U-Boot. They are based primarily on support for the Sequoia board.
17073 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
17075 Date: Sat Dec 22 15:16:25 2007 -0500
17077 Add configuration file for Korat board
17079 This patch supplies the configuration file for the Korat PPC440EPx-
17084 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
17086 Date: Sat Dec 22 15:16:11 2007 -0500
17088 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
17092 commit aba19604d848b2838cfb9ebe818909e6a216058e
17094 Date: Thu Dec 27 10:54:48 2007 -0500
17096 Add 440EPx DDR2 SPD DIMM support
17098 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
17099 controller. It should also work on the 440GRx. It is based on the DDR2
17100 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
17102 This code has been tested on prototype Korat boards with three Kingston
17103 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
17104 (two ranks). The Korat board has a single DIMM socket, but support has
17105 been provided (though not tested) for boards with two DIMM sockets.
17109 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
17111 Date: Sat Dec 22 15:15:30 2007 -0500
17113 Copy 440EPx/GRx SDRAM data-eye search to common directory
17115 This patch creates a non-board-specific file for performing the SDRAM
17116 data-eye search. It also adds ECC error checking to the test of valid
17117 data on readback when ECC is enabled.
17121 commit c46f53333b22b1f9098676bea8884fc7db820cf3
17123 Date: Sat Dec 22 15:15:13 2007 -0500
17125 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
17127 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
17128 It also fixes two typos in the definitions, so the board-specific
17129 "sdram.h" files containing these definitions are also fixed to avoid
17134 commit c348578bf612d0c56d8d376d23cae16defbd86af
17136 Date: Thu Dec 27 10:50:55 2007 -0500
17138 Add Ethernet 1000BASE-X support for PPC4xx
17140 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
17141 is defined, the PHY will advertise it's capabilities for autonegotiation
17142 based on the capabilities shown in the PHY's status registers, including
17143 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
17144 advertise hard-coded capabilities, as before.
17148 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
17150 Date: Thu Dec 27 09:52:17 2007 -0500
17152 Add driver for National Semiconductor LM73 temperature sensor
17154 This driver is based on the driver for the LM75.
17158 commit 12618278688ea9b3d76536960a5ad2e3790fac40
17160 Date: Sat Dec 22 15:14:00 2007 -0500
17162 Add driver for STMicroelectronics M41T60 RTC
17164 This driver is based on the driver for the M41T11. In the intended
17165 application, the RTC will be powered by a large capacitor, rather than a
17166 battery. The driver therefore checks to see whether the RTC has lost
17167 power. The chip's OUT bit is normally reset from its power-up state. If
17168 the OUT bit is read as set, or if the date and time are not valid, then the
17169 RTC is assumed to have lost power, and its date and time are reset to
17170 1900-01-01 00:00:00.
17172 Support for adjusting the speed of the clock to improve accuracy is
17173 provided through an environment variable.
17177 commit d3471173e14b7544bb60339eda8d3d3906694b0a
17179 Date: Sat Dec 22 15:34:39 2007 -0500
17181 Use out_be32() and friends to access memory-mapped registers in sequoia.c
17185 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
17187 Date: Sat Dec 22 15:34:20 2007 -0500
17189 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
17193 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
17195 Date: Sat Dec 22 15:23:50 2007 -0500
17197 Cosmetic changes to ECC POST for AMCC Denali core
17201 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
17203 Date: Wed Dec 26 20:20:19 2007 +0100
17205 ppc4xx: Fix compilation problem in 405 cache POST test
17209 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
17211 Date: Sat Dec 22 12:20:09 2007 +0100
17213 ppc4xx: Move virtual address of POST cache test to bigger address
17215 On Sequoia & LWMON5 the virtual address of the POST cache test is now
17216 moved to a bigger address. This enables usage of more memory on those
17221 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
17223 Date: Sat Dec 22 12:18:26 2007 +0100
17225 ppc4xx: Fix problem in 44x cache POST routine
17227 As repoted by Larry Johnson, running "diag run cache" caused a crash
17228 in U-Boot. This problem was introduced by a patch that removed the
17229 TLB entry for the cache test after the test has completed. Since this
17230 TLB was only setup once, a 2nd attempt to run this cache test
17231 failed with a crash. Now this TLB entry is created every time the
17236 commit b0265b576bb8fa9465f99e99c323768b562fadc2
17238 Date: Fri Dec 21 07:51:29 2007 +0100
17240 ppc4xx: Update Makalu fdt support
17244 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
17246 Date: Wed Dec 19 09:05:40 2007 +0100
17248 ppc4xx: Add fdt support to AMCC Katmai eval board
17252 commit 328a340392a5df9aaf00792be989df73e750859e
17254 Date: Tue Dec 18 08:44:51 2007 +0100
17256 ppc4xx: fdt: Cleanup setup of cpu node setup
17258 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
17259 without using the absolute path to the cpu node. This makes it possible
17260 to use this U-Boot version with both versions of cpu-node naming
17261 "cpu@0" and the former "PowerPC,440EPx@0".
17265 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
17267 Date: Mon Dec 17 17:26:21 2007 +0100
17269 ppc4xx: Fix lwmon5 compilation problem
17271 Now that the 440EPx ECC test is not board specific anymore
17272 remove this Makefile.
17276 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
17278 Date: Wed Dec 5 17:43:20 2007 +0100
17280 Fix ppc4xx clear_bss() code
17282 ppc4xx clear_bss() fails if BSS segment size is not
17283 divisible by 4 without remainder. This patch provides
17284 fix for this problem.
17288 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
17290 Date: Fri Nov 30 18:35:11 2007 +0100
17292 PPC4xx: Minimal changes to add vxWorks support
17296 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
17298 Date: Fri Nov 23 13:09:18 2007 +0100
17300 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
17302 When using dhcp/bootp the "netmask" environment variable is not
17303 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
17304 desireable, so the following patch adds this this option to the board
17310 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
17312 Date: Sat Oct 27 12:48:15 2007 -0400
17314 Fix/enhance ECC POST for 440EPx/GRx
17316 This patch allows the ECC POST to be used for different boards with the
17317 PPC440 Denali SDRAM controller. Modifications include skipping the test
17318 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
17319 to prevent timing errors.
17323 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
17325 Date: Sat Oct 27 12:48:05 2007 -0400
17327 PPC4xx: Move/rename ECC POST for 440EPx/GRx
17331 commit c29d2d3680046d430022c55e50fcb27f5866517e
17333 Date: Fri Dec 14 11:20:33 2007 +0100
17335 ppc4xx: use correct io accessors for 4xx ethernet POST
17339 commit ba79fde58a48c0a6ff8e2a96caba951594142203
17341 Date: Fri Dec 14 11:19:56 2007 +0100
17343 ppc4xx: fix flush + invalidate_dcache_range arguments
17345 flush + invalidate_dcache_range() expect the start and stop+1 address.
17346 So the stop address is the first address behind (!) the range.
17350 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
17352 Date: Fri Dec 14 08:41:29 2007 +0100
17354 ppc4xx: fdt: use fdt_fixup_ethernet()
17356 By using aliases in the dts file, the ethernet node fixup is
17357 much easier with the recently added functions.
17359 Please note that the dts file needs the aliases for this to work.
17363 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
17365 Date: Thu Dec 13 14:52:53 2007 +0100
17367 ppc4xx: Bring 4xx fdt support up-to-date
17369 This patch update the 4xx fdt support. It enabled fdt booting
17370 on the AMCC Kilauea and Sequoia for now. More can follow later
17375 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
17377 Date: Thu Dec 27 07:50:54 2007 +0100
17379 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
17381 The check for an sufficiently erased destination was missing in the
17382 buffered write function of the cfi flash driver (when
17383 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
17384 writing to such a region will fail with the currect error message.
17388 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
17390 Date: Mon Nov 12 10:56:17 2007 +0100
17392 Some configuration updates for the TQM5200 based TB5200 board:
17394 - enable command line history
17395 - increase malloc space (because of bigger flash sectors)
17399 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
17401 Date: Thu Sep 27 11:10:08 2007 +0200
17403 TQM8xx: use the CFI flash driver on all TQM8xx boards
17407 commit 11d9eec479b470eab9242ab937fca70a876d9376
17409 Date: Wed Sep 26 17:55:56 2007 +0200
17411 TQM885D: adjust for doubled flash sector size + some minor fixes
17415 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
17417 Date: Wed Sep 26 17:55:54 2007 +0200
17419 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
17421 CAS-Latency=2, Write Recovery Time tWR=2
17422 The max. supported bus frequency is 66 MHz. Therefore, changed
17423 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
17427 commit b988b8cd443989be65161888eea0127ad03f846f
17429 Date: Wed Sep 26 17:55:56 2007 +0200
17431 TQM885D: use calculated cpuclk instead of measuring it
17433 On the TQM885D the measurement of cpuclk with the PIT reference
17434 timer ist not necessary. Since all module variants use the same
17435 external 10 MHz oscillator, the cpuclk only depends on the PLL
17436 configuration - which is readable by software.
17440 commit 492c7049869348d31168de8dad89651315e468e0
17442 Date: Thu Sep 27 14:54:46 2007 +0200
17444 TQM885D: fix SDRAM refresh
17446 At 133 MHz the current SDRAM refresh rate is too fast
17447 (measured 4 * 1.17 us).
17448 CFG_MAMR_PTA changes from 39 to 128. This result
17449 in a refresh rate of 4 * 7.8 us at the default clock
17450 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
17451 This is a compromise until a new method is found to
17452 adjust the refresh rate.
17456 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
17458 Date: Thu Sep 27 14:54:46 2007 +0200
17460 TQM860M: Support for 10col SDRAMs, max. 128 MiB
17464 commit 61fb15c516fef5631e305f1976d7b3a679725856
17466 Date: Thu Dec 27 01:52:50 2007 +0100
17468 Fix coding style issues; update CHANGELOG.
17472 commit 467bcee11fe26ad422f2de971aa70866079870f2
17474 Date: Fri Dec 14 15:36:18 2007 +0100
17476 cfi_flash: Add manufacturer-specific fixups
17478 Run fixups based on the JEDEC manufacturer ID independent of the
17481 This changes current behaviour: Previously, geometry reversal for AMD
17482 chips were done based on the command set ID, while they are now done
17483 based on the JEDEC manufacturer and device ID.
17485 Also add fixup for top-boot Atmel chips. A fixup is needed for
17486 AT49BV6416(T) too, but since u-boot currently only reads the low byte
17487 of the device ID, there's no way to tell it apart from AT49BV642D,
17488 which should not have this fixup. Since AT49BV642D support is
17489 necessary to get ATNGW100 board support into mainline, I've commented
17490 out the fixup for now.
17494 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
17496 Date: Fri Dec 14 15:36:17 2007 +0100
17498 cfi_flash: Add cmdset-specific init functions
17500 Move things like reading JEDEC IDs and fixing up geometry reversal
17501 into separate functions. The geometry reversal fixup is now performed
17502 by altering the qry structure directly, which makes the sector init
17503 code slightly cleaner.
17507 commit e23741f4a6d8047520ef0d4971762749b3587d32
17509 Date: Fri Dec 14 15:36:16 2007 +0100
17511 cfi_flash: Read whole QRY structure in one go
17513 Read out the whole CFI Standard Query structure after successful cfi
17514 identification. This allows subsequent code to access this information
17515 directly without having to go through flash_read_uchar() and friends.
17519 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
17521 Date: Mon Dec 17 11:02:44 2007 +0100
17523 AVR32: Fix logic inversion in disable_interrupts()
17525 disable_interrupts() should return nonzero if interrupts were
17526 _enabled_ before, not disabled.
17530 commit acac475212cbedb17b321a363a1c878e2b47b37f
17532 Date: Fri Dec 14 16:51:22 2007 +0100
17534 AVR32: Enable interrupts at bootup
17536 The timer code depends on the timer interrupt to keep track of the
17537 upper 32 bits of the cycle counter. This obviously doesn't work when
17538 interrupts are disabled the whole time.
17542 commit 9570bcd87f4db255514f43b6701746c412f8fef0
17544 Date: Thu Nov 15 10:03:45 2007 +0100
17546 AVR32: Fix wrong pin setup for USART3
17548 As reported by Gerhard Berghofer:
17550 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
17551 instead of PB18 and PB19.
17553 which is obviously correct. There's currently no code that uses
17554 USART3, but custom boards may run into problems.
17558 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
17560 Date: Thu Nov 1 12:44:20 2007 +0100
17562 README: Remove ATSTK1000 daughterboard list
17564 As noted by Kim Phillips, these lists tend to become out of date.
17568 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
17570 Date: Tue Oct 30 14:56:36 2007 +0100
17572 Add ATSTK100[234] to MAINTAINERS
17574 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
17575 "mother". Also update the entry for ATSTK1000 to be not only about the
17576 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
17580 commit 64ff2357b1727213803591813dbc779c924bf772
17582 Date: Mon Oct 29 13:02:54 2007 +0100
17584 AVR32: Add support for the ATSTK1004 board
17586 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
17587 which is a derivative of AT32AP7000.
17591 commit 667568db157f374b85abd7e03596ddd1f0b25681
17593 Date: Mon Oct 29 13:02:54 2007 +0100
17595 AVR32: Add support for the ATSTK1003 board
17597 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
17598 which is a derivative of AT32AP7000.
17602 commit 5fee84a794a51ec830548cda485a770efb018b92
17604 Date: Mon Oct 29 13:23:33 2007 +0100
17606 AVR32: Make some AT32AP700x peripherals optional
17608 Add a chip-features file providing definitions of the form
17610 AT32AP700x_CHIP_HAS_<peripheral>
17612 to indicate the availability of the given peripheral on the currently
17617 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
17619 Date: Mon Oct 29 13:09:56 2007 +0100
17621 AVR32: Rename at32ap7000 -> at32ap700x
17623 The SoC-specific code for all the AT32AP700x CPUs is practically
17624 identical; the only difference is that some chips have less features
17625 than others. By doing this rename, we can add support for the AP7000
17626 derivatives simply by making some features conditional.
17630 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
17632 Date: Fri Jun 29 18:22:34 2007 +0200
17634 atmel_mci: Show SR when block read fails
17636 Show controller status as well as card status when an error occurs
17641 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
17643 Date: Thu Dec 13 14:52:53 2007 +0100
17645 ppc4xx: Bring 4xx fdt support up-to-date
17647 This patch update the 4xx fdt support. It enabled fdt booting
17648 on the AMCC Kilauea and Sequoia for now. More can follow later
17653 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
17655 Date: Thu Dec 13 12:56:34 2007 +0100
17657 cfi_flash: Use map_physmem() and unmap_physmem()
17659 Use map_physmem() and unmap_physmem() to convert from physical to
17660 virtual addresses. This gives the arch a chance to provide an uncached
17661 mapping for flash accesses.
17665 commit 4d7d6936eb29af7cca330937808312aa5f61454d
17667 Date: Thu Dec 13 12:56:33 2007 +0100
17669 Introduce map_physmem() and unmap_physmem()
17671 map_physmem() returns a virtual address which can be used to access a
17672 given physical address without involving the cache. unmap_physmem()
17673 should be called when the virtual address returned by map_physmem() is
17676 This patch adds a stub implementation which simply returns the
17677 physical address cast to a uchar * for all architectures except AVR32,
17678 which converts the physical address to an uncached virtual mapping.
17679 unmap_physmem() is a no-op on all architectures, but if any
17680 architecture needs to do such mappings through the TLB, this is the
17681 hook where those TLB entries can be invalidated.
17685 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
17687 Date: Thu Dec 13 12:56:32 2007 +0100
17689 cfi_flash: Introduce read and write accessors
17691 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
17692 them to access the flash memory. This makes it clearer when the flash
17693 is actually being accessed; merely dereferencing a volatile pointer
17694 looks just like any other kind of access.
17698 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
17700 Date: Thu Dec 13 12:56:31 2007 +0100
17702 Implement __raw_{read,write}[bwl] on all architectures
17704 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
17705 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
17710 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
17712 Date: Sat Oct 6 18:55:36 2007 +0200
17714 cfi_flash: Reorder functions and eliminate extra prototypes
17716 Reorder the functions in cfi_flash.c so that each function only uses
17717 functions that have been defined before it. This allows the static
17718 prototype declarations near the top to be eliminated and might allow
17719 gcc to do a better job inlining functions.
17723 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
17725 Date: Thu Dec 13 12:56:29 2007 +0100
17727 cfi_flash: Make some needlessly global functions static
17729 Make functions not declared in any header file static.
17733 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
17735 Date: Thu Dec 13 12:56:28 2007 +0100
17737 cfi_flash: Break long lines
17739 This patch tries to keep all lines in the cfi_flash driver below 80
17740 columns. There are a few lines left which don't fit this requirement
17741 because I couldn't find any trivial way to break them (i.e. it would
17742 take some restructuring, which I intend to do in a later patch.)
17746 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
17748 Date: Tue Dec 11 13:59:57 2007 +0100
17750 CFI: synchronize command offsets with Linux CFI driver
17752 Fixes non-working CFI Flash on the Inka4x0 board.
17756 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
17758 Date: Fri Dec 7 12:17:34 2007 -0600
17760 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
17762 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
17763 (MPC8544DS, MPC8548CDS, MPC8568MDS).
17767 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
17769 Date: Fri Dec 7 12:04:30 2007 -0600
17771 Update Freescale MPC85xx ADS/CDS/MDS board config
17773 * Enabled CONFIG_CMD_ELF
17777 commit d435793229ce29a42797c1edc39f5b34f987f91a
17779 Date: Fri Dec 7 04:59:26 2007 -0600
17781 Handle Asynchronous DDR clock on 85xx
17783 The MPC8572 introduces the concept of an asynchronous DDR clock with
17784 regards to the platform clock.
17786 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
17791 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
17793 Date: Thu Nov 29 10:34:28 2007 -0600
17795 Update Freescale MPC85xx ADS/CDS/MDS board config
17797 * Removed some misc environment setup
17798 * Enabled CONFIG_CMDLINE_EDITING
17802 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
17804 Date: Thu Nov 29 10:47:44 2007 -0600
17806 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
17808 Minor path corrections needed to ensure buildability.
17812 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
17814 Date: Thu Nov 29 10:16:18 2007 -0600
17816 Move the MPC8540 ADS board under board/freescale.
17818 Minor path corrections needed to ensure buildability.
17822 commit 870ceac5b3a3486c109396e005af81ae762b5710
17824 Date: Thu Nov 29 10:14:50 2007 -0600
17826 Move the MPC8560 ADS board under board/freescale.
17828 Minor path corrections needed to ensure buildability.
17832 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
17834 Date: Thu Nov 29 10:13:47 2007 -0600
17836 Move the MPC8568 MDS board under board/freescale.
17838 Minor path corrections needed to ensure buildability.
17842 commit a853d56c59b33415304531443633808736acfc6e
17844 Date: Thu Nov 29 02:18:59 2007 -0600
17846 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
17848 We already had defines for LAWAR_TRGT_IF_* that we should use
17849 rather than creating new ones. Also, added some missing defines for
17854 commit 04db400892da37b76a585e332a0c137954ad2015
17856 Date: Thu Nov 29 02:10:09 2007 -0600
17858 Stop using immap_t on 85xx
17860 In the future the offsets to various blocks may not be in same location.
17861 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
17862 instead of getting it via &immap.
17866 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
17868 Date: Thu Nov 29 01:23:09 2007 -0600
17870 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
17874 commit c480861bf000156e6a3e932c258db59ff2212dd3
17876 Date: Thu Nov 29 01:06:19 2007 -0600
17878 Update MPC8568 MDS to use libfdt
17880 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
17881 ethernet, pci, and serial for the various fixups that are done.
17885 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
17887 Date: Wed Nov 14 15:52:06 2007 -0500
17889 Add PCI Express support on MPC8568MDS
17894 commit b90d25497625b90ffa3f2911a0895ca237556ff5
17896 Date: Thu Nov 29 00:11:44 2007 -0600
17898 Update MPC85xx CDS to use libfdt
17900 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
17901 ethernet, pci, and serial for the various fixups that are done.
17905 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
17907 Date: Wed Nov 28 22:54:27 2007 -0600
17909 Update MPC8540 ADS to use libfdt
17911 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
17912 ethernet, pci, and serial for the various fixups that are done.
17916 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
17918 Date: Wed Nov 28 22:40:31 2007 -0600
17920 Update MPC8560 ADS to use libfdt
17922 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
17923 ethernet, pci, and serial for the various fixups that are done.
17927 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
17929 Date: Wed Nov 28 00:36:33 2007 -0600
17931 Stop using immap_t for cpm offset on 85xx
17933 In the future the offsets to various blocks may not be in same location.
17934 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
17935 instead of getting it via &immap->im_cpm.
17939 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
17941 Date: Tue Nov 27 23:25:02 2007 -0600
17943 Stop using immap_t for guts offset on 85xx
17945 In the future the offsets to various blocks may not be in same location.
17946 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
17947 instead of getting it via &immap->im_gur.
17951 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
17953 Date: Tue Nov 27 22:42:34 2007 -0600
17955 Update MPC8544 DS config
17957 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
17958 * Removed some misc environment setup
17959 * Moved to using fdtfile & fdtaddr as fdt env var names
17960 * Enabled CONFIG_CMDLINE_EDITING
17964 commit addce57e2e4c49e77ffb2020a84690713bb18b47
17966 Date: Mon Nov 26 17:12:24 2007 -0600
17968 Update MPC8544DS to use libfdt
17970 Updated the MPC8544DS config to use libfdt and assume use of aliases for
17971 ethernet, pci, and serial for the various fixups that are done.
17975 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
17977 Date: Thu Nov 29 00:15:30 2007 -0600
17979 Add libfdt based ft_cpu_setup for mpc85xx
17983 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
17985 Date: Tue Dec 11 13:38:19 2007 +0100
17987 ppc4xx: Correct GPIO offset in gpio_config()
17989 Thanks to Gary Jennejohn for pointing this out.
17993 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
17995 Date: Tue Dec 11 11:46:01 2007 +0100
17997 rtc: Fix merging problem
18001 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
18003 Date: Sat Dec 8 14:47:34 2007 +0100
18005 ppc4xx: 405EX: Correctly enable USB pins
18007 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
18008 function control) registers. This is done for the AMCC Kilauea and
18009 Makalu eval boards.
18013 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
18015 Date: Sat Dec 8 08:25:09 2007 +0100
18017 CFI: Coding style cleanup
18021 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
18023 Date: Fri Dec 7 23:35:02 2007 +0100
18025 CFI: support JEDEC flash roms in CFI-flash framework
18027 The following patch adds support for non-CFI flash ROMS, by hooking into the
18028 CFI flash code and using most of its code, as recently discussed here in the
18029 thread "Mixing CFI and non-CFI flashs".
18034 commit c01b17dd856fa120b2970f50d9598546a4927ec3
18036 Date: Wed Nov 28 21:24:50 2007 -0500
18038 Conditionally compile fdt_fixup_ethernet()
18040 Fix compiler warnings: On boards that don't have ethernets defined,
18041 don't compile fdt_fixup_ethernet().
18043 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
18045 Date: Tue Nov 27 21:59:46 2007 -0600
18047 Convert boards that set memory node to use fdt_fixup_memory()
18051 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
18053 Date: Mon Nov 26 17:06:15 2007 -0600
18055 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
18057 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
18058 determine which serial alias we should set linux,stdout-path to.
18062 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
18064 Date: Mon Nov 26 14:57:45 2007 -0600
18066 Add common memory fixup function
18068 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
18072 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
18074 Date: Mon Nov 26 11:19:12 2007 -0600
18076 Conditionally compile fdt_support.c
18078 Modify common/Makefile to conditionally compile fdt_support.c based
18079 on CONFIG_OF_LIBFDT.
18083 commit d88e7ba0980773479e1a64badb293116071b7ef0
18085 Date: Mon Nov 26 10:41:40 2007 -0600
18087 Fix build breakage due to libfdt import
18089 The IDS8247 got lost in the update and need an API update
18090 do to rename of functions in libfdt.
18094 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
18096 Date: Fri Nov 23 19:43:20 2007 -0500
18098 Add spaces around the = in the fdt print format.
18102 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
18104 Date: Fri Dec 7 01:25:38 2007 +0900
18106 sh: Moved driver of the SuperH dependence
18108 The composition of the directory in the drivers/ changed.
18109 I moved SuperH serial driver and marubun PCMCIA driver.
18113 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
18115 Date: Thu Dec 6 10:21:19 2007 +0100
18121 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
18123 Date: Thu Dec 6 10:21:03 2007 +0100
18125 ADS5121 Board: fix compile problem.
18129 commit a27044b14a9e93678a82d7b35f202b93e7687abc
18131 Date: Thu Dec 6 05:58:43 2007 +0100
18133 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
18135 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
18136 setting the FIXD bit in the SDR0_MFR register. Here a description of the
18139 Problem Description
18140 ------------------------------
18141 If a DMA is performed between memory and PCI with the DMA 1 Controller
18142 using prefetch, and as a result uses a special purpose buffer selected by
18143 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
18144 the first part of the transfer sequence is performed twice. The
18145 PPC440SPe PCI Controller requests more data than was needed such that in
18146 the case of enforce memory protection, a host CPU exception can occur.
18147 No data is corrupted, because data transfer is stopped in the PCI
18148 Controller. Prefetch enable is specified by setting DMA Configuration
18149 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
18151 Behavior that may be observed in a running system
18152 ---------------------------------------------------------------------------
18154 1. DMA performance is decreased because of the double access on the PCI bus
18156 2. If an illegal access to some address on the PCI bus is detected at the
18157 system level, a machine check or similar system error may occur.
18159 Workarounds Available
18160 ----------------------------------
18162 1. Do not program prefetch. Note that a prefetch command cannot be programmed
18163 without selecting a special purpose buffer.
18164 2. To avoid crossing a physical boundary of the PCI slave device, add 512
18165 bytes of address to the PCI address range.
18168 from AMCC and slighly changed.
18173 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
18175 Date: Tue Dec 4 16:29:48 2007 +0100
18177 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
18181 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
18183 Date: Mon Dec 3 00:15:28 2007 +0100
18185 Prepare for 1.3.1-rc1
18189 commit e15e33433e7c05111968dc9b434a52fd42cbd221
18191 Date: Fri Nov 30 07:15:41 2007 +0100
18193 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
18195 This manual PCIe reset triggering solves the problem seen with the
18196 Intel EPRO/1000 card, which was not detected (link not established)
18197 upon power-up reset.
18201 commit 260eea5676ca46903a335686cc020b29c4ca46fe
18203 Date: Thu Nov 29 01:21:54 2007 +0900
18205 sh: Add SuperH boards maintainer to MAINTAINERS file
18207 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
18211 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
18213 Date: Thu Nov 29 00:13:04 2007 +0900
18215 sh: Add ms7750se support in MAKEALL
18219 commit c7144373427a178332bf9754131c8c34c52c200a
18221 Date: Tue Nov 27 09:44:53 2007 +0100
18223 sh: Add sh3 and sh4 support in MAKEALL
18228 commit 130080874a3d28450098481a262c5f7c855e908d
18230 Date: Sun Nov 25 02:51:17 2007 +0900
18232 sh: Add document for SuperH.
18234 This document is a summary of information concerning SuperH of U-Boot.
18238 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
18240 Date: Sun Nov 25 02:39:31 2007 +0900
18242 sh: Add marubun's pcmcia driver
18244 Marubun pcmcia is a chip for PCMCIA used with SuperH.
18245 Of course, this can be used even by other architectures.
18246 When use this driver, came to be able to use CompactFlash
18251 commit febd86b969b975289ed948f1ac0eb9722da41ced
18253 Date: Sun Nov 25 02:32:13 2007 +0900
18255 sh: Update SuperH SCIF driver
18257 - Changed volatile unsigned to vu_.
18258 - Changed Makefile for kconfig.
18262 commit 8be760903645af09871be50ad0a6f9ebb62b311d
18264 Date: Tue Nov 27 11:57:35 2007 +0100
18266 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
18268 After an error in the AMCC 405EX users manual now correctly configure
18269 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
18274 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
18276 Date: Mon Nov 26 19:18:21 2007 +0100
18278 Cleanup coding style; update CHANGELOG
18282 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
18284 Date: Sun Nov 25 22:39:25 2007 +0100
18286 MAKEALL: add missing 512x boards in ppc
18290 commit a340c325e668ca7386c2276387681720be9c3757
18292 Date: Sun Nov 25 18:45:47 2007 +0100
18294 Makefile : fix tags ctags etags with new drivers organization
18298 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
18300 Date: Mon Nov 26 15:06:14 2007 +0100
18302 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
18304 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
18309 commit ca1ce226287270bb01e25b8e3674c701f12edf19
18311 Date: Mon Nov 26 15:01:45 2007 +0100
18313 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
18317 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
18319 Date: Sun Nov 25 18:45:47 2007 +0100
18321 Makefile : fix tags ctags etags with new drivers organization
18325 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
18327 Date: Sat Nov 24 21:26:56 2007 +0100
18329 drivers/mtd : move mtd drivers to drivers/mtd
18333 commit 318c0b90431f2648552e5ade78833f42652ce859
18335 Date: Sat Nov 24 21:17:55 2007 +0100
18337 drivers/misc : move misc drivers to drivers/misc
18341 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
18343 Date: Sat Nov 24 21:13:59 2007 +0100
18345 drivers/block : move block drivers to drivers/block
18349 commit 0c698dcaa70275eb8814f665b545547cee013892
18351 Date: Sat Nov 24 20:59:50 2007 +0100
18353 drivers/rtc : move rtc drivers to drivers/rtc
18357 commit f868cc5a50757d94f36c312395481cb0f187d9e6
18359 Date: Sat Nov 24 20:14:44 2007 +0100
18361 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
18365 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
18367 Date: Sat Nov 24 19:46:45 2007 +0100
18369 drivers/input : move input drivers to drivers/input
18373 commit e4558666293364fc3af1c1d9381ca933fa0f1275
18375 Date: Sat Nov 24 19:40:11 2007 +0100
18377 drivers/usb : move usb drivers to drivers/usb
18381 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
18383 Date: Sat Nov 24 19:33:38 2007 +0100
18385 drivers/serial : move serial drivers to drivers/serial
18389 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
18391 Date: Wed Nov 21 21:19:24 2007 +0100
18393 drivers/net : move net drivers to drivers/net
18397 commit 352d259130b349fe9593b8dada641bd78a9659e5
18399 Date: Tue Nov 20 20:41:48 2007 +0100
18401 drivers/video : move video drivers to drivers/video
18405 commit 73646217186aa17afc8e305c5f06f06dd335eaad
18407 Date: Tue Nov 20 20:33:09 2007 +0100
18409 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
18413 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
18415 Date: Tue Nov 20 20:28:09 2007 +0100
18417 drivers/pci : move pci drivers to drivers/pci
18421 commit 9162352817579840d7802da6d85872b3ca003c97
18423 Date: Thu Nov 22 17:23:23 2007 -0500
18425 Fix fdt printing for updated libfdt
18427 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
18431 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
18433 Date: Wed Nov 21 13:30:15 2007 -0600
18435 Add additional fdt fixup helper functions
18437 Added the following fdt fixup helpers:
18438 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
18439 * do_fixup_by_compat{_u32} - Find matching nodes by compat
18441 The _u32 variants work the same only the property they are setting
18442 is know to be a 32-bit integer instead of a byte buffer.
18446 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
18448 Date: Wed Nov 21 11:11:03 2007 -0600
18450 Add fdt_fixup_ethernet helper to set mac addresses
18452 Added a fixup helper that uses aliases to set mac addresses
18453 in the device tree based on the bd_t
18457 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
18459 Date: Wed Nov 21 14:07:46 2007 -0600
18461 Fix warnings from import of libfdt
18463 cmd_fdt.c: In function fdt_print:
18464 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
18465 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
18466 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
18467 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
18471 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
18473 Date: Wed Oct 24 11:04:22 2007 -0500
18475 Update libfdt from device tree compiler (dtc)
18477 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
18478 the device tree compiler (dtc) project.
18482 commit e93becf80d732b64aef81b23e8b6ece02c40533d
18484 Date: Sat Nov 3 19:46:28 2007 -0500
18486 Move do_fixup* for libfdt into common code
18488 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
18489 into common/fdt_support.c and renamed:
18491 do_fixup() -> do_fixup_by_path()
18492 do_fixup_u32() -> do_fixup_by_path_u32()
18496 commit f738b4a75998f42a7408defadc9baac7a31c92db
18498 Date: Thu Oct 25 16:15:07 2007 -0500
18500 Make no options to fdt print default to '/'
18504 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
18506 Date: Wed Oct 24 10:21:57 2007 -0500
18508 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
18511 fdt_node_is_compatible
18512 fdt_find_node_by_type
18513 fdt_find_compatible_node
18515 To ease merge of newer libfdt as we aren't using them anywhere at this time.
18517 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
18522 commit 98e2867cc85409b919f862e6c16026461ec955df
18524 Date: Wed Nov 21 09:19:37 2007 -0700
18526 [BUILD] Remove libraries when updating autoconf.mk
18528 Fix library problems caused by conditional compilation. Using
18529 autoconf.mk to decide which files to compile has caused a problem when
18530 changing configuration from one board to another without clearing out
18531 the library (*.a) files.
18533 It used to be that the linker was always passed the same list of .o
18534 files when building the .a files. However, that is not longer true
18535 with conditional compilation. Now, a different board config will have
18536 a different file list passed to the linker. The problem occurs when
18537 a library has already been built and the board config is changed.
18539 Since the linker will update instead of replace a preexisting library,
18540 then if the file list changes to remove some object files the old
18541 objects will still exist in the library.
18543 The solution is to remove all old library files when autoconf.mk is
18548 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
18550 Date: Wed Nov 21 08:49:50 2007 -0600
18552 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
18554 Modify libfdt/Makefile to conditionally compile the *.c files based
18555 on the board config.
18559 commit 4a43719a7738712811d822ca8125427b27a55cdc
18561 Date: Mon Sep 24 09:05:31 2007 -0600
18563 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
18565 Modify common/Makefile to conditionally compile the cmd_*.c files based
18566 on the board config.
18570 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
18572 Date: Mon Sep 24 09:05:31 2007 -0600
18574 [BUILD] Generate include/autoconf.mk from board config files
18576 Use cpp and sed to postprocess config.h and import the defined values
18577 into include/autoconf.mk. autoconf.mk is then included by config.mk to
18578 give 'make' access to the board configuration.
18580 Doing this enables conditional compilation at the Makefile level instead
18581 of by wrapping every .c file with #ifdef/#endif wrappers.
18585 commit 68b88999da87ab88e71e1306192905be3450198e
18587 Date: Tue Nov 20 15:02:26 2007 -0600
18589 8610HPCD: Enable the 8610 Display Interface Unit
18593 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
18595 Date: Tue Nov 20 15:00:53 2007 -0600
18597 Move 8610 DIU interface structure definitions to header file.
18599 These two structures are still needed during the
18600 initialization and setup of the DIU hardware.
18601 So move them to the fsl_diu_fb.h file for now.
18607 commit 080c646dbf474a109c3f85718fb01ce042a38c45
18609 Date: Tue Nov 20 20:14:18 2007 +0100
18611 drivers/i2c : move i2c drivers to drivers/i2c
18615 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
18617 Date: Mon Nov 19 22:20:24 2007 +0100
18619 Prepare for 1.3.0 release.
18623 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
18625 Date: Mon Nov 19 10:02:13 2007 -0500
18627 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
18629 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
18633 commit f8c320609366176b31104d9bf5e295232e1c7f1d
18635 Date: Mon Nov 19 11:14:16 2007 +0900
18637 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
18639 lowlevel_init.S: Assembler messages:
18640 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
18642 Looking at codes, the `memtest' and `clearmem' are intentional mixed
18643 use of `global symbols' and `label' for debugging purpose. To make it
18644 build, just disable global-symbols-use for now. As a result `memtest'
18645 still remains as unused, but leave it be...
18649 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
18651 Date: Mon Nov 19 12:59:14 2007 +0100
18653 Fix build problems with mp2usb board
18657 commit 6bf4c686afca1e86e1c384d59218f914605713bf
18659 Date: Sun Nov 18 18:36:11 2007 +0100
18661 s3c24x0: Fix usb_ohci.c missing in Makefile
18662 and usb_ohci.c warning differ in signedness
18666 commit 6073f61e078da5ddb521b56256bcc36508589883
18668 Date: Sun Nov 18 12:55:02 2007 +0100
18670 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
18674 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
18676 Date: Sun Nov 18 17:11:09 2007 +0100
18678 Fix compiler warnings for ARM systems.
18682 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
18684 Date: Sun Nov 18 16:36:27 2007 +0100
18686 Fix compiler warnings for PPC systems. Update CHANGELOG.
18690 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
18692 Date: Sun Nov 18 14:44:44 2007 +0100
18694 ppc4xx: Correct 405EX PCIe UTL register mapping
18696 Map 4k mem space for UTL registers for each port.
18700 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
18702 Date: Sat Nov 17 11:31:10 2007 +0100
18704 Fix warning differ in signedness in net/net.c and net/nfs.c
18706 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
18708 Date: Sat Nov 17 20:42:45 2007 +0900
18710 gth2.c: Fix a warning on gth2 build.
18712 gth2.c: In function 'misc_init_r':
18713 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
18717 commit 2309c130aa4c84b91bd874a41269c923eb61b555
18719 Date: Sat Nov 17 07:58:25 2007 +0100
18721 Fix warning differ in signedness in common/cmd_scsi.c
18725 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
18727 Date: Sat Nov 17 14:52:29 2007 +0100
18729 ppc4xx: Update AMCC Kilauea config file
18731 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
18735 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
18737 Date: Sat Nov 17 20:05:26 2007 +0900
18739 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
18741 Current trick to pick up GNU assembler minor version does not work with the
18742 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
18745 $ sde-as --version |grep "GNU assembler"
18746 GNU assembler 2.15.94 mipssde-6.02.02-20050602
18747 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
18749 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
18753 $ mips-linux-as --version |grep "GNU assembler"
18754 GNU assembler (GNU Binutils) 2.18
18755 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
18757 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
18761 As a result of above, you'll see many noises with such binutils:
18764 /bin/sh: line 0: [: : integer expression expected
18765 /bin/sh: line 0: [: : integer expression expected
18766 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
18767 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
18768 /bin/sh: line 0: [: : integer expression expected
18769 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
18770 /bin/sh: line 0: [: : integer expression expected
18771 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
18772 /bin/sh: line 0: [: : integer expression expected
18774 This patch simplifies the trick and makes it work with both versions of gas.
18775 I also replace an expensive `awk (or gawk)' with `cut'.
18779 commit 16664f72850846e645616da1c0fa5afcd6d15f15
18781 Date: Sat Nov 17 20:05:26 2007 +0900
18783 [MIPS] Remove useless instructions for initializing $gp.
18787 commit 03c031d5660ea946c39af6e2e16267da857c609f
18789 Date: Sat Oct 27 15:27:06 2007 +0900
18791 [MIPS] MIPS 4K core: Coding style cleanups
18793 No logical changes.
18797 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
18799 Date: Sat Nov 17 20:05:20 2007 +0900
18801 [MIPS] gth2.c: Fix a warning on gth2 build.
18803 gth2.c: In function 'misc_init_r':
18804 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
18808 commit 4fbd0741b2b6441da10be93e10267122581b7079
18810 Date: Sat Oct 27 15:22:33 2007 +0900
18812 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
18814 au1x00_eth.c: In function 'au1x00_miiphy_write':
18815 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
18819 commit f01320459736f156707425cf8112f98606301aa4
18821 Date: Sat Oct 27 15:00:25 2007 +0900
18823 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
18825 au1x00_eth.c: In function 'au1x00_enet_initialize':
18826 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
18827 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
18828 au1x00_eth.c:246: error: for each function it appears in.)
18829 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
18830 au1x00_eth.c: In function 'au1x00_miiphy_write':
18831 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
18832 make[1]: *** [au1x00_eth.o] Error 1
18834 Fixed by moving these two functions forward.
18838 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
18840 Date: Sat Oct 27 15:00:25 2007 +0900
18842 MAKEALL: Added missing pb1000 board
18846 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
18848 Date: Sat Oct 27 15:00:24 2007 +0900
18850 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
18854 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
18856 Date: Sat Oct 27 15:00:24 2007 +0900
18858 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
18862 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
18864 Date: Sat Nov 17 02:34:38 2007 +0100
18866 Update CHANGELOIG, prepare for -rc4
18870 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
18872 Date: Wed Nov 14 18:58:33 2007 +0100
18874 Fix the i2c frequency and default address in rsdproto board
18876 rsdproto board support has wrong I2C frequency and wrong return value
18881 commit 429c180edad038f91c989cb14b478228092e7054
18883 Date: Sat Nov 17 01:45:38 2007 +0100
18885 powerpc: Backout relocation changes for MPC5121, too.
18887 Apply Grant Likely's backout to MPC5121 code, too.
18893 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
18895 Date: Tue Nov 13 22:18:33 2007 -0700
18897 powerpc: Backout relocation changes.
18899 Ugh. I *hate* to back this change out, but these compiler flags don't
18900 work for relocation on all versions of GCC. I've not been able to
18901 reproduce the environment in my setup (and hence, not been able to
18902 find a combination that *does* work), so I've got no choice but to go
18903 back to the old gcc flags and linker script.
18907 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
18909 Date: Tue Nov 13 09:11:05 2007 +0100
18911 Fixed mips_io_port_base build errors.
18913 This patch has been sent on:
18916 Although mips_io_port_base is currently a part of IDE command, it is quite
18917 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
18918 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
18920 This patch is triggered by multiple definition of `mips_io_port_base' build
18921 error on gth2 (and tb0229 also needs this fix.)
18923 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
18924 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
18925 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
18926 make: *** [u-boot] Error 1
18931 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
18933 Date: Sat Nov 17 01:30:40 2007 +0100
18935 Fix a bug in the slave serial programming mode for the Xilinx
18936 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
18937 the most significant bit was set, which did not work on any
18938 architecture where "char" defaulted to be an unsigned type.
18944 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
18946 Date: Thu Nov 1 12:23:29 2007 -0500
18948 86xx: Fix broken variable reference when #def DEBUGing.
18950 Sometimes you can't reference the DDR2 controller variables.
18954 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
18956 Date: Fri Oct 26 18:32:00 2007 +0800
18958 make 8610 board use pixis reset
18962 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
18964 Date: Mon Oct 29 19:26:21 2007 +0800
18966 Unify pixis_reset altbank across board families
18968 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
18969 into the separate board config files.
18974 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
18976 Date: Wed Nov 7 08:19:21 2007 +0100
18978 Fix warning: pointer targets in assignment differ in signedness
18982 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
18984 Date: Wed Nov 7 08:19:19 2007 +0100
18986 Fix warning differ in signedness in common/cmd_ide.c
18990 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
18992 Date: Fri Nov 16 14:16:54 2007 +0100
18994 ppc4xx: Enable 405EX PCIe UTL register configuration
18996 Till now the UTL registers on 405EX were not initialized but left with
18997 their default values. This patch new initializes some of the UTL
18998 registers on 405EX.
19002 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
19004 Date: Fri Nov 16 14:00:59 2007 +0100
19006 ppc4xx: Update AMCC Makalu for board rev 1.1
19008 This patch adds changes needed for Makalu rev 1.1:
19010 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
19011 - Enable 2nd ethernet port EMAC1
19012 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
19013 - Reset PCIe ports via GPIO upon bootup
19017 commit 4d4faae65e115e327425cd514c1a35146a85166b
19019 Date: Mon Sep 24 09:05:31 2007 -0600
19021 Group PCI and PCMCIA drivers in drivers/Makefile
19025 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
19027 Date: Mon Sep 24 09:05:31 2007 -0600
19029 Group block/flash drivers in drivers/Makefile
19033 commit df58c81551700f058b44cacf55a7997fa63bfe0a
19035 Date: Mon Sep 24 09:05:31 2007 -0600
19037 Group USB drivers in drivers/Makefile
19041 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
19043 Date: Mon Sep 24 09:05:30 2007 -0600
19045 Group i2c drivers in drivers/Makefile
19049 commit ec00c76de0e5971273905998d62d6bb119324218
19051 Date: Mon Sep 24 09:05:30 2007 -0600
19053 Group console drivers in drivers/Makefile
19057 commit 754f230aa01b8c789fc31f8013c2487954073300
19059 Date: Mon Sep 24 09:05:30 2007 -0600
19061 Group network drivers in drivers/Makefile
19065 commit f0037c56b0d12cd46215124667b9f83d60ef9391
19067 Date: Mon Sep 24 09:05:30 2007 -0600
19069 Build: split COBJS value into multiple lines
19071 This change is in preparation for condtitionial compile support in the
19072 build system. By spliting them all into seperate lines now, subsequent
19073 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
19074 be less invasive and easier to review
19078 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
19080 Date: Mon Sep 24 09:05:30 2007 -0600
19082 Add .gitignore files
19087 commit 955413f35f054a82e40042f1dbcf501c6a05719b
19089 Date: Thu Nov 15 08:27:52 2007 -0700
19091 Revert "Correct relocation fixup for mpc5xx"
19093 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
19096 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
19098 Date: Thu Nov 15 08:24:32 2007 -0700
19100 Revert "Correct fixup relocation for MPC5xxx"
19102 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
19105 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
19107 Date: Thu Nov 15 08:21:04 2007 -0700
19109 Revert "Correct fixup relocation for mpc8220"
19111 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
19114 commit 70922342369e5e39b286fe21e768a239ca07a514
19116 Date: Thu Nov 15 08:20:57 2007 -0700
19118 Revert "Correct fixup relocation for mpc824x"
19120 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
19123 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
19125 Date: Thu Nov 15 08:20:50 2007 -0700
19127 Revert "Correct fixup relocation for mpc8260"
19129 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
19132 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
19134 Date: Thu Nov 15 08:20:43 2007 -0700
19136 Revert "Correct fixup relocation for mpc83xx"
19138 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
19141 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
19143 Date: Thu Nov 15 08:20:25 2007 -0700
19145 Revert "[MPC512x] Correct fixup relocation"
19147 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
19150 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
19152 Date: Thu Nov 15 14:25:09 2007 +0100
19154 ppc4xx: Small AMCC Kilauea cleanup
19156 Remove not needed pci_target_init() function.
19160 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
19162 Date: Thu Nov 15 14:23:55 2007 +0100
19164 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
19166 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
19167 - Cleanup of the 4xx GPIO functions
19168 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
19172 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
19174 Date: Thu Nov 15 14:20:08 2007 +0100
19176 ppc4xx: AMCC Taihu board config file cleanup
19178 This patch makes the AMCC Taihu a little more compatible to the other
19183 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
19185 Date: Thu Nov 15 13:37:28 2007 +0100
19187 [INKA4x0] NG hardware: flash support
19189 Disabled and remove inka4x0 custom flash driver, use CFI flash
19194 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
19196 Date: Thu Nov 15 13:29:55 2007 +0100
19198 [INKA4x0] NG hardware: SDRAM support
19200 Add support for three new DDR chips that may be present on a NG
19201 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
19203 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
19207 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
19209 Date: Thu Nov 15 13:24:43 2007 +0100
19211 [INKA4x0] NG hardware: platform code update
19213 - Cleanup compile warnings.
19214 - Add missing '\0' in default environment.
19215 - Increase CFG_MONITOR_LEN to 256 KiB.
19216 - Add required CFG_USE_PPCENV.
19220 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
19222 Date: Thu Nov 15 08:58:00 2007 +0000
19224 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
19225 Remove warnings re onenand_read() & write()
19227 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
19229 Date: Thu Nov 15 08:45:13 2007 +0000
19233 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
19235 Date: Thu Sep 13 18:52:28 2007 +0800
19237 Enable ULi1575 Ethernet support in 8610HPCD config
19242 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
19244 Date: Tue Nov 13 08:18:20 2007 +0100
19246 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
19250 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
19252 Date: Tue Nov 13 08:06:11 2007 +0100
19254 ppc4xx: Fix 405EX PCIe UTLSET register setup
19258 commit 1ce55151c85d068f70317a8d65c61058b891afb4
19260 Date: Tue Nov 13 07:50:29 2007 +0100
19262 [UC101] SRAM now with 2 MB working.
19266 commit 2d14684341109a69616e4d6016cd61402d55086f
19268 Date: Fri Nov 9 15:37:53 2007 +0100
19270 ppc4xx: Use generic usb-ohci driver for sequoia board
19272 This patch makes the sequoia board use the generic usb-ohci driver
19273 instead of cpu/ppc4xx/usb_ohci.c.
19278 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
19280 Date: Fri Nov 9 15:37:23 2007 +0100
19282 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
19284 This patch disables the 44x d-cache on 'usb start' and
19285 reenables it on 'usb stop'. This should be seen as a
19286 temporary fix until the generic usb-ohci driver can
19287 life with d-cache enabled.
19292 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
19294 Date: Fri Nov 9 15:36:44 2007 +0100
19296 ppc4xx: Remove redundant code from 4xx network driver
19298 This patch removes some redundant code and decrements the end
19299 address of cache flush and invalidate by 1.
19304 commit 5ca9881aad8c413ac2a82868a5e3719178254502
19306 Date: Fri Nov 9 15:24:26 2007 +0000
19308 Add apollon board support
19311 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
19313 Date: Fri Nov 9 12:19:58 2007 +0100
19315 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
19319 commit c7f69c340277935a6c19a956421852da944a365f
19321 Date: Fri Nov 9 12:18:54 2007 +0100
19323 ppc4xx: Make output a little shorter on I2C bootrom detection
19325 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
19326 already print a line with the information which I2C bootrom is
19327 used for bootstrap configuration. So we don't need this extra line
19328 with "I2C boot EEPROM en-/dis-abled".
19330 This patch also has a little code cleanup integrated.
19334 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
19336 Date: Thu Nov 8 12:50:18 2007 -0600
19338 ColdFire: MCF5329 - Remove reset registers from CCM
19342 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
19344 Date: Thu Nov 8 12:31:11 2007 -0600
19346 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
19350 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
19352 Date: Thu Nov 8 12:19:01 2007 -0600
19354 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
19358 commit 225a24b5e062ad94627424508ae814f51dbe1a34
19360 Date: Wed Nov 7 18:00:54 2007 -0600
19362 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
19366 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
19368 Date: Wed Nov 7 17:56:15 2007 -0600
19370 ColdFire: MCF532x - Update do_reset() using core reset
19374 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
19376 Date: Wed Nov 7 17:51:00 2007 -0600
19378 ColdFire: Update cpu flag for 4.2-xx compiler
19382 commit 070ba56115b4da63b46e974287fa4550d4023386
19384 Date: Wed Oct 31 14:59:04 2007 -0500
19386 8610: Add console frame buffer support to FSL 8610 DIU driver.
19388 Add cfb console support to FSL 8610 DIU driver.
19389 Inspect board version from PIXIS to obtain correct pixel format.
19391 Use #define CONFIG_VIDEO in config file to enable fb console.
19393 To switch monitor, set monitor variable to
19394 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
19395 followed by "diufb init".
19397 Preserve logo bitmap at the top of the fb console.
19402 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
19404 Date: Mon Oct 29 13:58:39 2007 -0500
19406 8610: Add 8610 DIU display driver
19408 1280x1024 and 1024x768 @ 32 bpp are supported now.
19409 DVI, Single-link LVDS, Double-link LVDS are all supported.
19411 Environmental variable "monitor" is used to specify monitor port.
19413 A new command "diufb" is introduced to reinitialize monitor
19414 and display a BMP file in the memory. So far, 1-bit, 4-bit,
19415 8-bit and 24-bit BMP formats are supported.
19418 - initialize the diu driver
19419 Enable the port specified in the environmental variable "monitor"
19422 - display bmp file in memory.
19423 The bmp image should be no bigger than the resolution, 1280x1024
19424 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
19426 Note, this driver allocate memory but doesn't free it after use
19427 It is written on purpose -- to avoid a failure of reallocation
19428 due to memory fragement.
19430 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
19435 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
19437 Date: Wed Oct 31 10:43:59 2007 -0500
19439 FSL: Add a freescale bitmap logo.
19441 This Freescale logo is a 340 x 128 x 4bpp BMP file
19442 that can be displayed by the DIU Framebuffer driver.
19447 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
19449 Date: Mon Oct 29 13:57:53 2007 -0500
19451 8610: Make some extra debug environment variables conditional.
19453 One may #define ENV_DEBUG to get them back again.
19457 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
19459 Date: Mon Oct 29 19:26:21 2007 +0800
19461 8610: Actually enable pixis_reset CONFIGs
19465 commit f3bceaab230b4748d0afc4109b6837308f018b40
19467 Date: Fri Oct 26 18:31:59 2007 +0800
19469 Fix the BAT definition of PCI IO on 8610 board
19471 The address in the BAT register is aligned with the BAT size.
19472 The original definition actually did not define BAT for PCIE2 IO.
19473 This patch fix this.
19477 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
19479 Date: Mon Oct 29 19:26:21 2007 +0800
19481 Unify pixis_reset altbank across board families
19483 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
19484 into the separate board config files.
19489 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
19491 Date: Fri Oct 26 18:32:00 2007 +0800
19493 make 8610 board use pixis reset
19497 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
19499 Date: Thu Nov 1 12:23:29 2007 -0500
19501 86xx: Fix broken variable reference when #def DEBUGing.
19503 Sometimes you can't reference the DDR2 controller variables.
19507 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
19509 Date: Mon Nov 5 17:39:24 2007 +0800
19511 Implement general ULi 526x Ethernet driver support in U-boot
19513 This patch implements general ULi 526x Ethernet driver.
19514 Until now, it is the only native Ethernet port on
19515 MPC8610HPCD board, but it could be used on other boards
19516 with ULi 526x Ethernet port as well.
19523 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
19525 Date: Thu Nov 1 08:46:50 2007 -0500
19527 NET: Add Ethernet 1000BASE-X support for PPC4xx
19529 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
19530 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
19531 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
19532 "mii info" command is modified to distinguish between 1000BASE-T and -X.
19537 commit 298035df4948b113d29ac0e694717d34b95bc5dc
19539 Date: Wed Oct 31 11:21:29 2007 -0500
19541 NET: Cosmetic changes
19546 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
19548 Date: Mon Nov 5 07:43:05 2007 +0100
19550 ppc4xx: Make output a little shorter on PCIe detection
19552 Now not max 3 lines but 2 lines are printed per PCIe port.
19556 commit 992742a5b09d9040adbd156fb90756af66ade310
19558 Date: Sat Nov 3 23:09:27 2007 +0100
19560 Cleanup coding style; update CHANGELOG
19564 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
19566 Date: Fri Nov 2 13:15:42 2007 -0700
19568 fix wording in README
19570 Changed the wording to properly describe the shadowing
19571 of the environment from ROM to RAM
19575 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
19577 Date: Wed Oct 31 02:18:15 2007 +0900
19579 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
19583 commit ec22755799466c8a103664bb3a5e647bf9c238f4
19585 Date: Thu Oct 25 16:08:14 2007 +0300
19587 Trimmed some variables in ne2000.c
19591 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
19593 Date: Thu Oct 25 17:51:27 2007 +0800
19595 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
19597 The scan code of the key 'z' is 0x1d, which should be handled.
19599 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
19604 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
19606 Date: Thu Oct 25 17:30:04 2007 +0800
19608 Fix USB support issue for MPC8641HPCN board.
19610 The configuration file has already enabled USB, but it
19611 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
19612 on MPC8641HPCN can not work because of the wrong USB
19615 And add the USB command to U-Boot commands list.
19619 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
19621 Date: Wed Oct 24 18:16:01 2007 +0200
19623 Use config_cmd_default.h instead of config_cmd_all.h
19627 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
19629 Date: Wed Oct 24 01:37:36 2007 +0200
19631 TQM5200: Call usb_cpu_init() during board init
19633 usb_cpu_init() configures GPS USB pins, clocks, etc. and
19634 is required for proper operation of kernel USB subsystem.
19635 This setup was previously done in the kernel by the fixup
19636 code which is being removed, thus low level init must be
19637 done by U-boot now.
19641 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
19643 Date: Tue Oct 23 16:25:50 2007 +0200
19647 An obvious typo. Originally fixed in linkstation u-boot port.
19651 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
19653 Date: Tue Oct 23 14:35:05 2007 +0200
19655 Fix a typo in cpu/mpc824x/interrupts.c
19657 Since December 2003 the timer_interrupt_cpu() function in
19658 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
19659 parameter. Remove it.
19663 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
19665 Date: Wed Oct 17 11:13:51 2007 +0200
19667 add ft_cpu_setup(..) on mpc8260
19669 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
19670 based on code from mpc5xxx
19675 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
19677 Date: Wed Oct 17 11:18:42 2007 +0200
19679 changes for IDS8247 board support
19681 To get the IDS8247 board working following are done:
19682 - FCC2 is deactivated
19683 - FCC1 is activated
19685 - CFI driver is activated
19686 - Adapted for use with LIBFDT
19691 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
19693 Date: Sat Nov 3 12:08:28 2007 +0100
19695 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
19697 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
19698 Again, only one image supports both targets.
19702 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
19704 Date: Wed Oct 24 15:48:37 2007 +0200
19706 ATSTK1002: Remove default ethernet addresses
19708 Wolfgang is right: It's not a good idea to set up default initial
19709 ethernet addresses for a board, even though they belong to the local
19712 This will change the failure mode from "IT manager screams at you for
19713 using duplicate ethernet addresses" to a nice error message explaining
19714 that the ethernet address hasn't been set properly.
19718 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
19720 Date: Mon Oct 29 17:40:35 2007 -0400
19724 This is a multi-part message in MIME format.
19726 commit e6e505eae94ed721e123e177489291fc4544b7b8
19728 Date: Mon Oct 29 17:19:03 2007 -0400
19730 Found a bug in the way the DHCP Request packet is built, where the IP address
19731 that is offered by the server is bound to prematurely. This patch is a fix of
19732 that bug where the IP address offered by the DHCP server is not used until
19733 after the DHCP ACK from the server is received.
19738 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
19740 Date: Wed Oct 31 20:58:34 2007 +0100
19742 ppc4xx: Fix acadia_nand build problem
19744 Since the cache handling functions were moved from start.S into cache.S
19745 the acadia NAND booting Makfile needs to be adapted accordingly.
19749 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
19751 Date: Wed Oct 31 20:57:11 2007 +0100
19753 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
19755 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
19756 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
19757 boards by defining CONFIG_4xx_DCACHE in the board config file. This
19758 option will disappear, when more boards use is successfully and no
19759 more known problems exist.
19761 This is tested successfully on Sequoia and Katmai. The only problem that
19762 needs to be fixed is, that USB is not working on Sequoia right now, since
19763 it will need some cache handling code too, similar to the 4xx EMAC driver.
19767 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
19769 Date: Wed Oct 31 20:51:10 2007 +0100
19771 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
19773 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
19774 disable the cache for the CPU POST tests, since these tests consist
19775 of self modifying code. This is done via the new change_tlb() function.
19779 commit f71b2888b4b3c870909a0341427b2a914246f81f
19781 Date: Wed Oct 31 20:47:26 2007 +0100
19783 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
19785 This patch enables the 4xx EMAC POST driver to work too, when dcache is
19790 commit a2685904061b35a17583d65fe47cdc2686a69eaa
19792 Date: Wed Oct 31 20:45:53 2007 +0100
19794 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
19798 commit ff768cb168d8157c24a25016dbfbeb465e47f420
19800 Date: Wed Oct 31 18:01:24 2007 +0100
19802 ppc4xx: Change 4xx ethernet driver to handle cached memory too
19804 This patch enables the 4xx EMAC driver to work too, when dcache is
19809 commit 483e09a223c666269ef81d3573a6591b1046b0ef
19811 Date: Wed Oct 31 17:59:22 2007 +0100
19813 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
19815 This function is used to either turn cache on or off in a specific
19820 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
19822 Date: Wed Oct 31 17:57:52 2007 +0100
19824 ppc4xx: Remove cache definition from 4xx board config files
19826 All 4xx board config files don't need the cache definitions anymore.
19827 These are now defined in common headers.
19831 commit 9b94ac61d2176185c30adf0793e079ec30e68687
19833 Date: Wed Oct 31 17:55:58 2007 +0100
19835 ppc4xx: Rework 4xx cache support
19837 New cache handling functions added and all existing functions
19838 moved from start.S into seperate cache.S.
19842 commit 06713773da4ac3d390c63d82641eb553224b27c2
19844 Date: Tue Oct 23 18:03:12 2007 +0200
19846 ppc4xx: Remove compiler warning from previous commit
19850 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
19852 Date: Tue Oct 23 14:40:30 2007 +0200
19854 ppc4xx: Remove temporary TLB entry in POST cache test
19858 commit 1338e6a81834099ba19733b69aafd8ef5f098094
19860 Date: Tue Oct 23 14:05:08 2007 +0200
19862 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
19864 I lately noticed, that newer 4xx board with GBit support sometimes don't
19865 finish link autonegotiation in 4 seconds. Changing this timeout to 5
19866 seconds seems fine here.
19870 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
19872 Date: Tue Oct 23 14:03:17 2007 +0200
19874 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
19876 This patch changes all in32/out32 calls to use the recommended in_be32/
19877 out_be32 macros instead.
19881 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
19883 Date: Thu Oct 25 12:24:59 2007 +0200
19885 ppc4xx: Fix POST ethernet test for Haleakala
19887 The POST ethernet test needed to be changed to dynamically determine
19888 the count of ethernet devices. This code is cloned from the 4xx
19893 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
19895 Date: Tue Oct 23 11:31:05 2007 +0200
19897 ppc4xx: Correct UART input clock calculation and passing to fdt
19899 We now use a value in the gd (global data) structure for the UART input
19900 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
19905 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
19907 Date: Tue Oct 23 10:10:08 2007 +0200
19909 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
19911 The Haleakala is nearly identical with the Kilauea eval board. The only
19912 difference is that the 405EXr only supports one EMAC and one PCIe
19913 interface. This patch adds support for the Haleakala board by using
19914 the identical image for Kilauea and Haleakala. The distinction is done
19915 by comparing the PVR.
19919 commit 9f798766aa85e62eb8fa8c721e148df609b78137
19921 Date: Tue Oct 23 08:29:10 2007 +0200
19923 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
19925 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
19929 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
19930 modules are still plugged in. So it is recommended to remove the DIMM
19931 modules while using the NAND booting code with the fixed SDRAM setup!
19936 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
19938 Date: Mon Oct 22 16:24:44 2007 +0200
19940 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
19944 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
19946 Date: Mon Oct 22 16:22:40 2007 +0200
19948 ppc4xx: Rework of 4xx serial driver (4)
19952 - Use in_8/out_8 macros instead of in8/out8
19953 - No need for UART_BASE marco anymore, now really handled via function
19955 - serial_init_common() introduced
19956 - Further coding style cleanup
19960 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
19962 Date: Mon Oct 22 15:45:49 2007 +0200
19964 ppc4xx: Rework of 4xx serial driver (3)
19966 Change all linker scripts to reference the changed driver name iop480_uart.o.
19970 commit 882ae41274921f9016131806bdeb27e19606f47a
19972 Date: Mon Oct 22 15:44:39 2007 +0200
19974 ppc4xx: Rework of 4xx serial driver (2)
19976 Change all linker scripts to reference the changed driver name 4xx_uart.o.
19978 Note: In most cased all these explicit referencing of these object files
19979 in the linker scripts is not neccessary. Only for manually embedded
19980 environment into the U-Boot image, which is not done is most cases.
19984 commit ad31e40bed042cb670d0036fea96435007afb838
19986 Date: Mon Oct 22 15:09:59 2007 +0200
19988 ppc4xx: Rework of 4xx serial driver (1)
19990 This patch starts the rework of the PPC4xx serial driver. First we split
19991 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
19992 handling code and the other one iop480_uart.c with the UART code for the
19993 PLX-Tech IOP480 PPC (PPC403 based).
19997 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
19999 Date: Mon Oct 22 10:30:38 2007 +0200
20001 ppc4xx: Correct UART input clock calculation and passing to fdt
20005 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
20007 Date: Mon Oct 22 07:34:34 2007 +0200
20009 ppc4xx: Add initial AMCC Makalu 405EX support
20013 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
20015 Date: Mon Oct 22 07:33:52 2007 +0200
20017 ppc4xx: Add freqUART to CPU speed detection
20019 This value is needed later for the device tree configuration of
20024 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
20026 Date: Sun Oct 21 14:26:29 2007 +0200
20028 ppc: Small Kilauea cleanup of config file
20032 commit 758c037aeead34b49631b8da3a90b1bba14c0410
20034 Date: Sun Oct 21 08:16:12 2007 +0200
20036 rtc: Add Xicor/Intersil X1205 RTC support
20038 This patch adds support for the Xicor/Intersil X1205 RTC used on the
20039 AMCC Makalu eval board. This driver is basically cloned from the Linux
20040 driver version (2.6.23).
20042 This patch also introduces the Linux bcd.h header for the BCD2BIN/
20043 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
20044 should be converted to also use this header instead of implementing
20045 their own local copy of these functions/macros.
20049 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
20051 Date: Sun Oct 21 08:12:41 2007 +0200
20053 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
20055 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
20056 PPC440_SYS_INFO structure into the common ppc4xx.h header.
20058 Lot's of other macros are good candidates to be consolidated this way
20063 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
20065 Date: Sun Oct 21 08:05:18 2007 +0200
20067 ppc4xx: Fix size setup in Kilauea DDR2 init routine
20069 The size was initilized wrong. Instead of 256MB, the DDR2 controller
20070 was setup to 512MB. Now the correct values is used.
20072 This patch also does a little cleanup and adds a comment here.
20076 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
20078 Date: Thu Oct 18 17:29:04 2007 +0200
20080 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
20082 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
20083 number is used to access system registers.
20088 commit c36c68160333ac5fe41ec3db12a728b7075b3912
20090 Date: Thu Oct 18 07:42:27 2007 +0200
20092 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
20094 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
20095 is the internal SRAM. Since I now ported and tested this endpoint mode
20096 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
20099 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
20104 commit 5cb4af4791f61843432155142b6cfac901f66c10
20106 Date: Thu Oct 18 07:39:38 2007 +0200
20108 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
20110 This patch adds endpoint support for the AMCC Kilauea eval board. It can
20111 be tested by connecting a reworked PCIe cable (only 1x lane singles
20112 connected) to another root-complex.
20114 In this test setup, a 64MB inbound window is configured at BAR0 which maps
20115 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
20116 access the first 64MB of the SDRAM on the PPC side.
20120 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
20122 Date: Sat Oct 13 16:43:23 2007 +0200
20124 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
20126 This patch adds support for dynamic configuration of PCIe ports for the
20127 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
20128 boards Yucca & Katmai and the 405EX board Kilauea.
20130 This dynamic configuration is done via the "pcie_mode" environement
20131 variable. This variable can be set to "EP" or "RP" for endpoint or
20132 rootpoint mode. Multiple values can be joined via the ":" delimiter.
20137 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
20140 Per default Yucca will be configured as:
20143 Per default Katmai will be configured as:
20144 pcie_mode=RP:RP:REP
20146 Per default Kilauea will be configured as:
20152 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
20154 Date: Thu Oct 11 11:15:59 2007 +0200
20156 ppc4xx: Enable device tree support (fdt) on Kilauea per default
20158 This patch enables the fdt support on the AMCC Kilauea eval board.
20159 Additionally now EBC ranges fdt fixup is included to support NOR
20160 FLASH mapping via the Linux physmap_of driver.
20162 This Kilauea port now support booting arch/ppc and arch/powerpc
20163 Linux kernels. The default environment "net_nfs" is for arch/ppc
20164 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
20165 support will be removed.
20169 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
20171 Date: Thu Oct 11 11:11:45 2007 +0200
20173 ppc4xx: Add additional debug info to 4xx fdt support
20177 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
20179 Date: Fri Oct 5 21:28:58 2007 +0200
20181 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
20185 commit 1941cce71b1ae975602854045061e82f94ecd012
20187 Date: Fri Oct 5 17:35:10 2007 +0200
20189 ppc4xx: Fix small merge problem in 4xx_enet.c
20193 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
20195 Date: Fri Oct 5 17:11:30 2007 +0200
20197 ppc4xx: Add initial AMCC Kilauea 405EX support
20201 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
20203 Date: Fri Oct 5 17:10:59 2007 +0200
20205 ppc4xx: Add PPC405EX support
20209 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
20211 Date: Fri Oct 5 17:09:36 2007 +0200
20213 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
20217 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
20219 Date: Fri Oct 5 17:07:50 2007 +0200
20221 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
20225 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
20227 Date: Fri Oct 5 17:04:57 2007 +0200
20229 POST: Add 405EX support to 4xx UART POST test
20233 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
20235 Date: Fri Oct 5 15:10:02 2007 +0200
20237 DTT: Prepare DS1775 driver for use of different I2C addresses
20241 commit 19e93b1e16d267220440d827b920fbad8abfa70f
20243 Date: Fri Oct 5 14:23:43 2007 +0200
20245 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
20249 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
20251 Date: Fri Oct 5 09:22:33 2007 +0200
20253 ppc4xx: 4xx_pcie: Disable debug output as default
20257 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
20259 Date: Fri Oct 5 09:18:23 2007 +0200
20261 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
20265 commit 4dbee8a90df613eb517aadbecebd70f168913d30
20267 Date: Fri Oct 5 07:57:20 2007 +0200
20269 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
20271 128MB seems to be the smallest possible value for the memory size
20272 for on PCIe port. With this change now the BAR's of the PCIe cards
20273 are accessible under U-Boot.
20275 One big note: This only works for PCIe port 0 & 1. For port 2 this
20276 currently doesn't work, since the base address is now 0xc0000000
20277 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
20278 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
20279 to change the base addresses completely and this change would have
20280 too much impact right now.
20282 This patch adds debug output to the 4xx pcie driver too.
20286 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
20288 Date: Wed Oct 3 21:16:32 2007 +0200
20290 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
20294 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
20296 Date: Wed Oct 3 15:01:02 2007 +0200
20298 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
20300 These files were introduced with the IBM 405GP but are currently used on all
20301 4xx PPC platforms. So the name doesn't match the content anymore. This patch
20302 renames the files to 4xx_pci.c/h.
20306 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
20308 Date: Wed Oct 3 14:14:58 2007 +0200
20310 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
20314 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
20316 Date: Wed Oct 3 10:38:09 2007 +0200
20318 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
20320 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
20321 the SDR registers of the PCIe ports. This makes the overall design
20322 clearer, since it removed a lot of switch statements which are not
20325 Also, the functions ppc4xx_init_pcie_rootport() and
20326 ppc4xx_init_pcie_entport() are merged into a single function
20327 ppc4xx_init_pcie_port(), since most of the code was duplicated.
20328 This makes maintainance and porting to other 4xx platforms
20333 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
20335 Date: Wed Oct 3 07:48:09 2007 +0200
20337 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
20339 This patch is the first patch of a series to make the 440SPe PCIe code
20340 usable on different 4xx PPC platforms. In preperation for the new 405EX
20341 which is also equipped with PCIe interfaces.
20343 (2) This patch renames the functions from 440spe_ to 4xx_ with a
20344 little additional cleanup
20348 commit c7c6da23028f146d912514b95aefa3da7cf37699
20350 Date: Wed Oct 3 07:34:10 2007 +0200
20352 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
20354 This patch is the first patch of a series to make the 440SPe PCIe code
20355 usable on different 4xx PPC platforms. In preperation for the new 405EX
20356 which is also equipped with PCIe interfaces.
20358 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
20362 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
20364 Date: Wed Oct 24 01:37:36 2007 +0200
20366 TQM5200: Call usb_cpu_init() during board init
20368 usb_cpu_init() configures GPS USB pins, clocks, etc. and
20369 is required for proper operation of kernel USB subsystem.
20370 This setup was previously done in the kernel by the fixup
20371 code which is being removed, thus low level init must be
20372 done by U-boot now.
20377 commit b5af773f8d92677e06f3295b45557c9d0a487c24
20379 Date: Thu Oct 25 17:51:27 2007 +0800
20381 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
20383 The scan code of the key 'z' is 0x1d, which should be handled.
20385 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
20391 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
20393 Date: Mon Oct 15 11:59:17 2007 +0200
20395 PXA USB OHCI: "usb stop" implementation.
20397 Some USB keys need to be switched off before loading the kernel
20398 otherwise they can remain in an undefined status which prevents them
20399 to be correctly recognized by the kernel.
20404 commit 31548249decf18a6b877a18436b6139dd483fe4a
20406 Date: Mon Oct 29 17:40:35 2007 -0400
20410 This is a multi-part message in MIME format.
20412 commit e6e505eae94ed721e123e177489291fc4544b7b8
20414 Date: Mon Oct 29 17:19:03 2007 -0400
20416 Found a bug in the way the DHCP Request packet is built, where the IP address
20417 that is offered by the server is bound to prematurely. This patch is a fix of
20418 that bug where the IP address offered by the DHCP server is not used until
20419 after the DHCP ACK from the server is received.
20424 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
20426 Date: Thu Oct 25 17:16:22 2007 -0500
20428 ColdFire 54455: Fix correct boot location for atmel and intel
20432 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
20434 Date: Thu Oct 25 17:14:00 2007 -0500
20436 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
20440 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
20442 Date: Thu Oct 25 17:12:36 2007 -0500
20444 ColdFire 5329: Assign correct SDRAM size and fix cache
20448 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
20450 Date: Thu Oct 25 17:10:23 2007 -0500
20452 ColdFire 5253: Assign correct SDRAM size
20456 commit 2acefa72ee0026f862ab65597ca687428f63a973
20458 Date: Thu Oct 25 17:09:17 2007 -0500
20460 ColdFire 5282: Fix external flash boot and return dramsize
20464 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
20466 Date: Thu Oct 25 17:20:01 2007 +0200
20468 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
20472 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
20474 Date: Wed Oct 24 08:42:25 2007 +0200
20476 TQM5200: fix spurious characters on second serial interface
20478 With this patch PSC3 is configured as UART. This is done, because if
20479 the pins of PSC3 are not configured at all (-> all pins are GPI),
20480 due to crosstalk, spurious characters may be send over the RX232_2_TXD
20486 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
20488 Date: Wed Oct 24 08:41:27 2007 +0200
20490 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
20492 Some commands for the STK52xx base board try to access the SM501 grafic
20493 controller. But the TQM5200S has no grafic controller (only the TQM5200
20494 and the TQM5200B have). This patch deactivates the commands accessing
20495 the SM501 for the TQM5200S.
20500 commit b31f64343ead9482cd439b1adbe4c34026a641b1
20502 Date: Mon Oct 22 16:45:53 2007 +0200
20504 TQM5200: fix spurious characters on second serial interface
20506 With this patch PSC3 is configured as UART. This is done, because if
20507 the pins of PSC3 are not configured at all (-> all pins are GPI),
20508 due to crosstalk, spurious characters may be send over the RX232_2_TXD
20513 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
20515 Date: Mon Oct 22 16:40:06 2007 +0200
20517 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
20519 Some commands for the STK52xx base board try to access the SM501 grafic
20520 controller. But the TQM5200S has no grafic controller (only the TQM5200
20521 and the TQM5200B have). This patch deactivates the commands accessing
20522 the SM501 for the TQM5200S.
20526 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
20528 Date: Sun Oct 21 09:14:28 2007 +0200
20530 Mips: Fix string functions differ prototype declaration
20534 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
20536 Date: Fri Oct 19 17:51:40 2007 -0500
20538 fsl_pci_init enable COMMAND_MEMORY if inbound window
20540 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
20541 to pciauto_setup_device has the side effect of not getting
20542 COMMAND_MEMORY set.
20546 commit e9d0d527992566ebef9826962ff1745b2f082b92
20548 Date: Fri Oct 19 10:55:24 2007 +0200
20550 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
20554 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
20556 Date: Fri Oct 19 08:10:15 2007 +0200
20558 fix warning: no return statement in function returning non-void
20562 commit e78220f6e514206757acfe247297fc9a328a881f
20564 Date: Fri Oct 19 06:33:45 2007 +0200
20566 xsengine: Fix no partition type specified, use DOS as default
20570 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
20572 Date: Fri Oct 19 00:24:59 2007 +0200
20574 lubbock: Fix no partition type specified, use DOS as default
20578 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
20580 Date: Tue Oct 23 16:50:03 2007 +0200
20582 Coding style: keep lists sorted; update CHANGELOG
20586 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
20588 Date: Fri Oct 19 00:09:05 2007 +0200
20590 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
20594 commit 96455bfebc9887837095c9051d216f53c61b5f10
20596 Date: Fri Oct 19 00:07:39 2007 +0200
20598 Fix warning differ in signedness in board/innokom/innokom.c
20602 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
20604 Date: Fri Oct 19 00:25:33 2007 +0200
20606 fix pxa255_idp board
20608 The pxa255_idp being an old unmaintained board showed several issues:
20609 1. CONFIG_INIT_CRITICAL was still defined.
20610 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
20611 3. Symbol flash_addr was undeclared.
20612 4. The boards lowlevel_init function was still called memsetup.
20613 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
20614 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
20615 'target CPU does not support interworking' warnings on recent compilers.
20616 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
20617 indexes rather than the register definitions from the pxa-regs header
20618 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
20619 avoid any ambiguities.
20620 8. There were several redefinition warnings concerning ICMR, OSMR3,
20621 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
20622 9. The board configuration file was rather outdated.
20623 10. The part header file defined the vendor, product and revision arrays
20624 as unsigned chars instead of just chars in the block_dev_desc_t
20629 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
20631 Date: Wed Oct 17 11:56:31 2007 -0500
20633 Make MPC8266ADS command selection more robust
20635 Fix MPC8266 command line definition so it won't break when new commands
20636 are added to u-boot.
20639 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
20641 Date: Tue Oct 23 13:14:10 2007 +0200
20643 Motion-PRO: Update configuration to accomodate next generation board.
20645 New board has faster oscillator and a different Flash chip. This affects:
20646 - CFG_MPC5XXX_CLKIN
20648 - Flash CS configuration (timings)
20649 - Flash sector size, and thus MTD partition layout
20650 - malloc() arena size (due to bigger Flash sectors)
20651 - smaller memory test range (due to bigger malloc() arena)
20653 This patch also enables more extensive memory testing via "mtest".
20657 commit eff501904df2bf1724a750062628ba2c51dbb1f8
20659 Date: Tue Oct 23 11:36:07 2007 +0200
20661 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
20663 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
20664 register must be written a value of 0x00000004 as the first step of the
20665 SDRAM contorller configuration.
20669 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
20671 Date: Tue Oct 23 10:22:16 2007 +0100
20673 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
20675 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
20677 Date: Tue Oct 23 10:17:42 2007 +0200
20679 ppc4xx: lwmon5: Some further GPIO config changes
20683 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
20685 Date: Sun Oct 21 22:10:10 2007 +0900
20687 [MIPS] Fix UNCACHED_SDRAM
20689 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
20694 commit 00101dd7a32d12f698150123e47e4b3420279f86
20696 Date: Sun Oct 21 21:30:42 2007 +0900
20698 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
20702 commit eb700636db017d310edaeb559b13d82588560674
20704 Date: Sun Oct 21 10:55:37 2007 +0900
20706 [MIPS] u-boot.lds: Define _gp in a standard manner
20710 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
20712 Date: Sun Oct 21 10:55:36 2007 +0900
20714 [MIPS] Fix $gp usage
20716 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
20717 As a general principle, we should use _gp for $gp.
20719 Thanks to linker script's help we fortunately have _gp which equals to
20720 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
20721 be able to access to GOT entires, global variables and procedure entry
20722 points. The right thing to do is to use _gp.
20724 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
20725 which holds the offset from _gp. When updating GOT entries, we use this
20726 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
20729 I made some change to leave over num_got_entries.
20734 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
20736 Date: Sun Oct 21 10:55:36 2007 +0900
20738 [MIPS] u-boot.lds: Fix __got_start and __got_end
20740 Ensure that __got_start points to top of the `.got', and __got_end points
20741 to bottom as well, so that we never fail to count num_got_entries.
20745 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
20747 Date: Sun Oct 21 10:55:36 2007 +0900
20749 [MIPS] u-boot.lds: Remove duplicated .sdata section
20753 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
20755 Date: Sun Oct 21 01:01:17 2007 +0200
20757 Minor coding style cleanup; update CHANGELOG
20761 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
20763 Date: Thu Oct 4 20:47:10 2007 +0300
20767 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
20768 to do anything in eth_stop() if eth_init() was not called.
20769 Simplified RX path in order to avoid timeouts on really really
20770 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
20771 clever enough to cope with 1 packet per eth_rx().
20775 commit df90968b48fb34fa9072fab150db2ac89678f537
20777 Date: Mon Sep 24 13:32:13 2007 -0400
20779 Setting MSR[DE] in do_reset
20782 This patch ensures the soft reset of the board for the 85xx boards
20783 by setting the MSR[DE] in the do_reset function.
20787 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
20789 Date: Mon Sep 24 13:36:01 2007 -0400
20794 This patch fixes the MSR overwrite in the start.S when moving out of
20799 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
20801 Date: Fri Oct 19 11:33:48 2007 -0500
20803 tsec driver should clear RHALT on startup
20805 This was causing problems for some people.
20811 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
20813 Date: Thu Oct 11 00:29:18 2007 -0500
20815 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
20817 On the MPC85xx CDS we have two issues:
20819 1. The device tree fixup code did not check to see if the property we are
20820 trying to update is actually found. Its possible that it would update
20821 random memory starting at 0.
20823 2. Newer Linux kernel's have moved the location of the PCI nodes to be
20824 sibilings of the soc node and not children. The explicit PATH to the PCI
20825 node would not be found for these device trees. Add the ability to handle
20826 both paths. In the future we shouldn't handle such fixups by explicit path.
20830 commit a3063eec775719b7e91023bbec3f64b3118791df
20832 Date: Thu Oct 11 00:18:48 2007 -0500
20834 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
20836 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
20837 console. Make it so we match that config what we tell Linux as the early
20842 commit e1ce3cb617bb06f91f82f98915391175addf3e82
20844 Date: Tue Oct 2 11:12:27 2007 -0500
20846 Remove magic numbers from cache related operations for mpc85xx
20848 The mpc85xx start code uses some magic numbers that we actually
20849 have #defines for in <config.h> so use those instead.
20853 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
20855 Date: Fri Oct 19 16:47:26 2007 +0200
20861 commit 281df457c1aa50d2752165d0c5c3282d4027b974
20863 Date: Thu Oct 18 17:47:19 2007 +0800
20865 mpc83xx: Add configure entry for MPC83xx ATM support
20867 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
20868 Makfile and MAKEALL
20873 commit d2646554f529a9577515eceb0ec5eceee18244ba
20875 Date: Thu Oct 18 17:44:38 2007 +0800
20877 mpc83xx: pq-mds-pib.c typo error
20879 Correct to val8 from val.
20884 commit 3e11ae80fec1ee12194940955431186abf6009c2
20886 Date: Wed Oct 17 15:40:19 2007 +0200
20888 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
20892 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
20894 Date: Tue Oct 16 15:27:43 2007 -0500
20896 Initial mpc8610hpcd Makefile files.
20903 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
20905 Date: Tue Oct 16 15:26:51 2007 -0500
20907 Initial mpc8610hpcd cpu/, README and include/ files.
20914 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
20916 Date: Tue Oct 16 13:54:01 2007 -0500
20918 Initial mpc8610hpcd board files.
20925 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
20927 Date: Tue Oct 16 14:50:40 2007 -0500
20929 Make MPC8266ADS board compile again.
20933 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
20935 Date: Mon Aug 27 12:41:03 2007 -0500
20937 86xx: Allow for fewer DDR slots per memory controller.
20939 As a direct correlation exists between DDR DIMM slots
20940 and SPD EEPROM addresses used to configure them, use
20941 the individually defined SPD_EEPROM_ADDRESS* values to
20942 determine if a DDR DIMM slot should have its SPD
20943 configuration read or not.
20945 Effectively, this now allows for 1 or 2 DIMM slots
20946 per memory controller.
20950 commit 4d4a945e189a2f384c66432316da2788a0ac1607
20952 Date: Mon Oct 15 11:59:17 2007 +0200
20954 PXA USB OHCI: "usb stop" implementation.
20956 Some USB keys need to be switched off before loading the kernel
20957 otherwise they can remain in an undefined status which prevents them
20958 to be correctly recognized by the kernel.
20962 commit e2e93442e558cf1500e92861f99713b2f045ea22
20964 Date: Mon Oct 15 11:39:00 2007 +0200
20966 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
20968 The I2C bootstrap values that can be setup via the "bootstrap" command,
20969 were setup incorrect regarding the generation of the internal sync PCI
20970 clock. The values for PLB clock == 133MHz were slighly incorrect and the
20971 values for PLB clock == 166MHz were totally incorrect. This could
20972 lead to a hangup upon booting while PCI configuration scan.
20974 This patch fixes this issue and configures valid PCI divisor values
20975 for the sync PCI clock, with respect to the provided external async
20978 Here the values of the formula in the chapter 14.2 "PCI clocking"
20979 from the 440EPx users manual:
20981 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
20983 33MHz async PCI frequency:
20985 => 32 <= 44.3 <= 65 (div = 3)
20988 => 32 <= 55.3 <= 65 (div = 3)
20990 66MHz async PCI frequency:
20992 => 65 <= 66.5 <= 132 (div = 2)
20995 => 65 <= 83 <= 132 (div = 2)
20999 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
21001 Date: Mon Oct 15 11:29:33 2007 +0200
21003 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
21005 The BCSR status bit for the 66MHz PCI operation was correctly
21006 addressed (MSB/LSB problem). Now the correct currently setup
21007 PCI frequency is displayed upon bootup.
21009 This patch also fixes this problem on Rainier & Yellowstone, since these
21010 boards use the same souce code as Sequoia & Yosemite do.
21014 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
21016 Date: Wed Sep 26 17:55:56 2007 +0200
21018 TQM860M: adjust for doubled flash sector size.
21020 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
21021 doubled sector size.
21025 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
21027 Date: Wed Sep 26 17:55:54 2007 +0200
21029 TQM8xx: Fix CAN timing.
21033 commit d43e489baf02afae49077791fb22332d240d8656
21035 Date: Thu Sep 27 14:54:36 2007 +0200
21037 TQM866M: fix SDRAM refresh
21039 At 133 MHz the current SDRAM refresh rate is too fast
21040 (measured 4 * 1.17 us).
21041 CFG_MAMR_PTA changes from 39 to 97. This result
21042 in a refresh rate of 4 * 7.8 us at the default clock
21043 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
21044 This is a compromise until a new method is found to
21045 adjust the refresh rate.
21049 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
21051 Date: Wed Sep 26 17:55:55 2007 +0200
21053 TQM866M: adjust for doubled flash sector size.
21055 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
21056 doubled sector size.
21060 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
21062 Date: Sun Oct 14 16:12:29 2007 +0200
21064 [FIX] XUPV2P change command handling
21065 and remove code violation
21067 commit 636400198228d96983c06657b17f760f5989958e
21069 Date: Sun Oct 14 00:13:19 2007 +0200
21071 Prepare for 1.3.0-rc3 release
21075 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
21077 Date: Sat Sep 29 13:41:37 2007 +0200
21079 Fix warning differ in signedness in cpu/pxa/mmc.c
21083 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
21085 Date: Sat Oct 13 23:51:14 2007 +0200
21087 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
21092 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
21094 Date: Sat Oct 13 21:15:39 2007 +0200
21096 Coding Style cleanup.
21100 commit e1893815b0999410d7a327589611c7b38e95299e
21102 Date: Fri Oct 12 15:49:39 2007 +0200
21104 GP3 SSA: enable RTC
21108 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
21110 Date: Tue Oct 9 13:58:24 2007 +0200
21112 [ads5121] EEPROM support added.
21116 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
21118 Date: Sat Oct 6 18:55:35 2007 +0200
21120 AVR32: Initialize bi_flash* in board_init_r
21122 The ATSTK1000-specific flash driver intializes bi_flashstart,
21123 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
21126 Initialize these in board_init_r instead so that things will still be
21127 set up correctly when we switch to the CFI driver.
21131 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
21133 Date: Fri Oct 5 10:40:54 2007 +0200
21135 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
21139 commit 92869195ef8210758d2176230c0a36897afd50ed
21141 Date: Fri Oct 5 09:46:06 2007 +0200
21143 CM5200: Fix missing null-termination in hostname manipulation code
21147 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
21149 Date: Tue Oct 2 19:09:01 2007 +0200
21151 Fix memtest breakage
21153 CFG_MEMTEST_START uses weird magic involving gd, which fails to
21154 compile. Use hardcoded values instead (we actually know how much RAM
21159 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
21161 Date: Tue Oct 2 11:44:46 2007 +0200
21163 ppc4xx: Coding style cleanup
21167 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
21169 Date: Tue Oct 2 11:44:19 2007 +0200
21171 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
21175 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
21177 Date: Mon Oct 1 09:51:50 2007 +0200
21179 Program EPLD to force full duplex mode for PHY.
21181 EPLD forces modes of PHY operation. By default full duplex is turned off.
21182 This fix turns it on.
21186 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
21188 Date: Mon Sep 24 14:50:32 2007 +0300
21190 Bugfix: Use only one PTD for one endpoint
21192 Original isp116x-hcd code prepared multiple PTDs for longer than 16
21193 byte transfers for one endpoint. That is unnecessary because the
21194 ISP116x is able to split long data from one PTD into multiple
21195 transactions based on the buffer size of the endpoint. It also caused
21196 serious problems if the endpoint NAKed some of the transactions. In
21197 that case ISP116x wouldn't notice that the other PTDs were for the same
21198 endpoint and would try the other PTDs possibly out of order. That would
21199 break the whole transfer.
21201 This patch makes isp116x_submit_job to use one PTD for one transfer.
21206 commit 86ec86c04326c3913178a7679aa910de071da75d
21208 Date: Thu Sep 27 23:27:47 2007 +0200
21210 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
21214 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
21216 Date: Tue Sep 11 14:12:55 2007 +0200
21218 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
21222 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
21224 Date: Wed Sep 26 16:35:54 2007 -0500
21226 85xx io out functions need sync after write.
21228 This fixes the mc146818 rtc_read/write functions for 85xx.
21232 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
21234 Date: Tue Sep 25 15:48:05 2007 -0600
21236 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
21238 CFG_FPGA_XILINX is a bit value used to test against the value in
21239 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
21240 think that is the intention in this code.
21244 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
21246 Date: Mon Sep 24 00:41:30 2007 +0200
21248 [FIX] change command handling and removing code violation
21250 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
21252 Date: Mon Sep 24 00:36:06 2007 +0200
21254 [FIX] change sets of commands
21255 because changing of command handling brings
21256 compilation problems
21258 commit cb1bc63b75a232571eb69aa2c8aa919321655845
21260 Date: Mon Sep 24 00:30:42 2007 +0200
21262 [FIX] Email reparation & Copyright
21263 Both codes are written by myself without any
21266 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
21268 Date: Mon Sep 24 00:25:11 2007 +0200
21270 [PATCH] Change macro name for UartLite
21271 because PowerPC 405 can use UartLite as console
21273 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
21275 Date: Mon Sep 24 00:21:19 2007 +0200
21277 [PATCH] Add support for design without interrupt controller
21280 commit 0731933ec8ec45d02ba89b52df673d526873cdde
21282 Date: Mon Sep 24 00:19:48 2007 +0200
21284 [FIX] resolve problem with cpu without barrel shifter
21286 commit db14d77995ce515b728b178b63f82babe60e3d56
21288 Date: Mon Sep 24 00:18:46 2007 +0200
21290 [FIX] repair email address
21292 commit 481d4328618804add1f818a6c96296121cd0528e
21294 Date: Mon Sep 24 00:17:42 2007 +0200
21296 [FIX] repair MFSL commands
21298 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
21300 Date: Mon Sep 24 00:08:37 2007 +0200
21302 synchronizition with mainline
21304 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
21306 Date: Sun Sep 23 02:42:38 2007 +0900
21308 sh: Add support command of ide with sh
21312 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
21314 Date: Sun Sep 23 02:38:42 2007 +0900
21316 sh: Update Makefile
21318 Add support MS7722SE01 to Makefile.
21322 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
21324 Date: Sun Sep 23 02:31:13 2007 +0900
21326 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
21330 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
21332 Date: Sun Sep 23 02:19:24 2007 +0900
21334 sh: Update MS7750SE01 platform
21338 commit 516ad760db3553766267ada01b7d5d727faa4bbd
21340 Date: Sun Sep 23 02:17:08 2007 +0900
21342 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
21346 commit b02bad128669e567fce87d8df823b06a0144b8db
21348 Date: Sun Sep 23 02:12:30 2007 +0900
21350 sh: Update core code of SuperH.
21354 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
21356 Date: Thu Sep 20 00:04:14 2007 +0200
21362 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
21364 Date: Tue Sep 18 21:36:35 2007 +0200
21366 Avoid compiler warning.
21370 commit 8a783a65851bc7421ab69f442261215e21b8891a
21372 Date: Tue Sep 18 12:24:57 2007 -0600
21374 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
21376 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
21377 nulls in a string differently. For example, the following statement:
21378 echo "this is a string\0" > afile
21379 Will produce the following with /bin/bash:
21380 "this is a string\0"
21381 But with /bin/dash, will produce:
21384 Bug fixed by moving the embedded null out of the makefile and into the
21385 config header. Also renamed the macro to avoid usage colision with the same
21386 macro used by other board ports.
21390 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
21392 Date: Tue Sep 18 17:40:27 2007 +0200
21394 MCC200: fix build warning
21396 The MCC200 board config file includes version.h for some customer-
21397 specific setting, which causes warnings with "make depend"; build
21398 version.h before depend.
21402 commit bd86220f58b99d6896198c385fda132f0c980915
21404 Date: Tue Sep 18 13:07:54 2007 +0100
21406 Move coloured led API to status_led.h
21407 Improve indentation in drivers/at45.c
21409 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
21411 Date: Tue Sep 18 08:47:20 2007 +0200
21413 Update atstk1002 bootargs.
21415 Updates to atstk1002 U-Boot header file:
21416 - Changed bootargs:
21417 * Set the bootargs for at1002 to point to the SD-card partition instead
21418 * ... of the boot flash.
21419 * Removing the rootfstype since that argument are not needed.
21424 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
21426 Date: Wed Sep 12 13:32:37 2007 +0200
21428 Add some comments to clocks in atstk1002.h
21430 This patch applies some clarifying comments to how the different
21431 clocks are setup according to atstk1002.h Some of the previous
21432 comments where stating wrongful information.
21436 commit 97213f32416ead885deafea86774e912ffd60ad0
21438 Date: Mon Sep 17 17:04:47 2007 +0200
21440 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
21444 commit 30363e98fa470fbecea5e8bc0f1443352754f303
21446 Date: Mon Sep 17 08:20:47 2007 +0200
21448 Small whitespace cleanup of OneNAND patch
21452 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
21454 Date: Mon Sep 10 17:15:14 2007 +0900
21456 OneNAND support (take #2)
21458 [PATCH 3/3] OneNAND support (take #2)
21460 OneNAND support at U-Boot
21464 commit 17aa2800457df0c06b41516f46f126712c196219
21466 Date: Mon Sep 10 17:14:34 2007 +0900
21468 OneNAND support (take #2)
21470 [PATCH 2/3] OneNAND support (take #2)
21472 OneNAND support at U-Boot
21476 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
21478 Date: Mon Sep 10 17:13:49 2007 +0900
21480 OneNAND support (take #2)
21482 [PATCH 1/3] OneNAND support (take #2)
21484 OneNAND support at U-Boot
21488 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
21490 Date: Sun Sep 16 20:51:57 2007 +0200
21492 [FIX] remove files form repository
21494 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
21496 Date: Sun Sep 16 17:10:04 2007 +0200
21498 TQM8xx[LM]: Fix broken environment alignment.
21500 With recent toolchains, the environment sectors were no longer aligned to
21501 sector boundaries. The reason was a combination of two bugs:
21503 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
21504 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
21505 this gets defined, is not included here (and cannot be included
21506 without causing lots of problems).
21508 Added a new #define CFG_USE_PPCENV for all boards which really
21509 want to put the environment is a ".ppcenv" section.
21511 2) The linker scripts just include environment.o, silently assuming
21512 that the objects in that file are really in the order in which
21513 they are coded in the C file, i. e. "environment" first, then
21514 "redundand_environment", and "env_size" last. However, current
21515 toolchains (GCC-4.x) reorder the objects, causing the environment
21516 data not to start on a flash sector boundary:
21518 Instead of: we got:
21520 40008000 T environment 40008000 T env_size
21521 4000c000 T redundand_environment 40008004 T redundand_environment
21522 40010000 T env_size 4000c004 T environment
21524 Note: this patch fixes just the first part, and cures the alignment
21525 problem by making sure that "env_size" gets placed correctly. However,
21526 we still have a potential issue because primary and redundant
21527 environment sectors are actually swapped, i. e. we have now:
21529 40008000 T redundand_environment
21530 4000c000 T environment
21531 40010000 T env_size
21533 This shall be fixed in the next version.
21537 commit eb6da8050797c204c9d010548424186c7ce32fc1
21539 Date: Sun Sep 16 02:39:35 2007 +0200
21541 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
21545 commit cd2d1602c54cc6957bdef3872272a4b264893960
21547 Date: Mon Sep 10 14:54:56 2007 -0400
21551 Fixup for the break statement in wrong place.
21557 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
21559 Date: Tue Sep 11 17:04:00 2007 +0200
21561 Fix do_div() usage in nand process output
21563 Fix usage of do_div() in nand erase|read|write process output.
21565 The last patch to nand_util.c introduced do_div() instead of libgcc's
21566 implementation. But do_div() returns the quotient in its first
21567 macro parameter and not as result.
21571 commit c750d2e6692a000a82f29de7bf24e3dc21239161
21573 Date: Wed Sep 12 12:36:53 2007 +0200
21575 NAND: Add CFG_NAND_QUIET option
21577 This config option sets the default for the progress information
21578 output behavior that can also be configured through the 'quiet'
21579 environment variable.
21581 The legacy NAND code does not print the current progress info
21582 on the console. So this option is for backward compatibility for
21583 units that are in the field and where setting the quiet variable
21584 is not an option. With CFG_NAND_QUIET set to '1' the console
21585 progress info is turned off. This can still be overwritten
21586 through the environment variable.
21590 commit dcb88630290d2bcd803386dd4c2be73142994c4f
21592 Date: Thu Sep 13 16:06:05 2007 -0700
21594 ColdFire: fix build error becasue of bad type of mii_init()
21598 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
21600 Date: Thu Sep 13 16:04:05 2007 -0700
21602 ColdFire: Fix build error caused by pixis.c
21604 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
21608 commit e21659e30660a1377c42af135a6114efe39801d9
21610 Date: Fri Sep 14 11:14:42 2007 -0600
21612 Update MPC8349ITX*_config to place config.tmp in right place.
21614 MPC834ITX*_config does not store config.tmp at the correct locatation,
21615 causing MPC8349ITXGP to have the wrong TEXT_BASE.
21620 commit 1218abf1b5817a39a82399b4b928b00750575bda
21622 Date: Sat Sep 15 20:48:41 2007 +0200
21624 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
21628 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
21630 Date: Sat Sep 15 11:55:42 2007 +0200
21632 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
21634 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
21639 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
21641 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
21643 Date: Sat Sep 15 00:03:35 2007 +0200
21645 Synchronize with U-BOOT mainline
21647 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
21649 Date: Fri Sep 14 11:14:42 2007 -0600
21651 Update MPC8349ITX*_config to place config.tmp in right place.
21653 MPC834ITX*_config does not store config.tmp at the correct locatation,
21654 causing MPC8349ITXGP to have the wrong TEXT_BASE.
21660 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
21662 Date: Thu Sep 13 18:21:48 2007 +0200
21664 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
21668 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
21670 Date: Thu Sep 13 16:33:59 2007 +0200
21672 tqm5200: Restore customary env. variable boot commands for powerpc kernels
21674 - update default definitions of kernel_addr and fdt_addr env. variables
21675 - make arch/powerpc booting the default scenario
21676 - update MTD partition layout to match the above
21680 commit f34024d4a328e6edd906456da98d2c537155c4f7
21682 Date: Wed Sep 12 00:48:57 2007 +0200
21684 Fix memory corruption problem on STX GP3 SSA Board.
21688 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
21690 Date: Tue Sep 11 15:35:01 2007 +0100
21694 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
21696 Date: Tue Sep 11 15:42:11 2007 +0200
21698 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
21699 scan on second pci bus.
21703 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
21705 Date: Tue Sep 11 12:57:52 2007 +0200
21707 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
21709 Bamboo has a file sdram.c which needs special treatment when building in
21710 separate directory. It has to be linked to build directory otherwise it is
21715 commit d45963854eff39d575124d859419bb4953ce2c87
21717 Date: Tue Sep 11 00:37:04 2007 +0200
21719 [FIX] Microblaze ML401 - repare FLASH handling
21721 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
21723 Date: Mon Sep 10 16:55:59 2007 +0100
21725 Allocate CPU Architecture Code for STMicroelectronics' ST200.
21728 ---------------------------------------------------
21730 commit 754bac48156f8958d8f6a53a51eda88ab5758929
21732 Date: Mon Sep 10 20:42:31 2007 +0200
21734 Update version to match current state.
21738 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
21740 Date: Mon Sep 10 17:39:08 2007 +0200
21742 [MPC512x] Streamline frame handling in the FEC driver
21744 - convert frame size settings to be derived from a single base
21745 - set frame size to the recommended default value
21749 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
21751 Date: Mon Sep 10 11:34:00 2007 +0900
21753 Remove compiler warning: target CPU does not support interworking
21757 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
21759 Date: Sun Sep 9 21:21:33 2007 +0200
21761 Fix compile error in spc1920 config.
21766 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
21768 Date: Fri Sep 7 09:25:07 2007 -0600
21770 Bugfix: make bootm+libfdt compile on boards with no flash
21774 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
21776 Date: Fri Sep 7 18:35:37 2007 +0200
21778 [PPC440SPe] PCIe environment settings for Katmai and Yucca
21780 - 'pciconfighost' is set by default in order to be able to scan bridges
21781 behind the primary host/PCIe
21783 - 'pciscandelay' env variable is recognized to allow for user-controlled
21784 delay before the PCIe bus enumeration; some peripheral devices require a
21785 significant delay before they can be scanned (e.g. LSI8408E); without the
21786 delay they are not detected
21790 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
21792 Date: Fri Sep 7 18:20:23 2007 +0200
21794 [PPC440SPe] Improve PCIe configuration space access
21796 - correct configuration space mapping
21797 - correct bus numbering
21798 - better access to config space
21800 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
21801 first device on the first bus. We now allow to configure up to 16 buses;
21802 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
21803 peripheral devices farther in hierarchy can be identified.
21807 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
21809 Date: Fri Sep 7 17:46:18 2007 +0200
21811 [PPC440SPe] Convert machine check exceptions handling
21813 Convert using fixup mechanism to suppressing MCK for the duration of config
21814 read/write transaction: while fixups work fine with the case of a precise
21815 exception, we identified a major drawback with this approach when there's
21816 an imprecise case. In this scenario there is the following race condition:
21817 the fixup is (by design) set to catch the instruction following the one
21818 actually causing the exception; if an interrupt (e.g. decrementer) happens
21819 between those two instructions, the ISR code is executed before the fixup
21820 handler the machine check is no longer protected by the fixup handler as it
21821 appears as within the ISR code. In consequence the fixup approach is being
21822 phased out and replaced with explicit suppressing of MCK during a PCIe
21823 config read/write cycle.
21827 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
21829 Date: Fri Sep 7 17:43:36 2007 +0200
21831 Fix typo in MAKEALL script.
21835 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
21837 Date: Fri Sep 7 17:09:21 2007 +0200
21839 [MPC512x] Proper handling of larger frames in the FEC driver
21841 When frame larger than local RX buffer is received, it is split and handled
21842 by two buffer descriptors. Prior to this patch the FEC driver discarded
21843 contents of a buffer descriptor without the 'LAST' bit set, so the first
21844 part of the frame was lost in case of larger frames. This fix allows to
21845 safely combine the two pieces into the whole frame.
21849 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
21851 Date: Fri Sep 7 17:05:36 2007 +0200
21853 [MPC512x] Correct fixup relocation
21857 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
21859 Date: Fri Sep 7 01:21:25 2007 +0200
21861 Update CHANGELOG, minor coding style cleanup.
21863 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
21865 Date: Thu Aug 30 23:01:49 2007 +0200
21867 PXA270: Added support for TrizepsIV board.
21869 This patch add support for the Trizeps IV module (520Mhz).
21873 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
21875 Date: Thu Aug 30 22:57:04 2007 +0200
21877 PXA270: Add support for multiple serial ports.
21879 This patch adds support for multiple serial ports to the PXA target.
21880 FFUART, BTUART and STUART are supported.
21884 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
21886 Date: Thu Aug 30 22:48:47 2007 +0200
21888 PXA270: fix compile issue (invalid lvalue)
21890 Code is broken for PXA270 due to "invalid lvalue in assignment".
21892 This patch fix it in pxa-regs.h
21896 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
21898 Date: Thu Aug 30 18:19:05 2007 +0800
21900 Add BUILD_DIR support for bios emulator.
21904 commit b4d8a55145442f136982634862341a3e02002bda
21906 Date: Fri Aug 31 14:41:51 2007 +0900
21908 [MIPS] Remove inline asm string functions
21910 Stop using inline string functions on MIPS as other ARCHs do so,
21911 since the optimized inline asm versions are not small.
21913 This change is triggered by a following MIPS build error:
21914 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
21915 common/exports.c:32: undefined reference to `strcmp'
21916 make: *** [u-boot] Error 1
21920 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
21922 Date: Fri Aug 31 14:41:45 2007 +0900
21924 [MIPS] Update asm string header
21926 This patches contains several bugfixes and cleanups in the latest upstream:
21928 - Don't include linux/config.h
21929 - Remove buggy inline version of memscan.
21930 - Merge with Linux 2.6.11-rc3.
21931 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
21932 - Goodbye mips64. 31704 lines of code bite the dust.
21933 - Replace extern inline with static inline.
21934 - Fix return value of strncpy.
21935 - Remove a bunch more "$1" clobbers.
21939 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
21941 Date: Tue Sep 4 17:31:22 2007 +0200
21943 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
21945 Fix incorrect blob address calculation in do_bootm_linux() that prevents
21946 booting the kernel from a multi-file image (kernel + initrd + blob).
21948 Also, make minor updates to the U-Boot's output and to the coding style.
21952 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
21954 Date: Fri Aug 31 14:29:04 2007 +0200
21956 Add support for Sil680 IDE controller.
21958 o add drivers/sil680.c to support the Sil680 IDE-controller.
21959 o drivers/Makefile: add sil680.o.
21963 commit e79021223bc339df655e360645a52c457a74b067
21965 Date: Thu Sep 6 09:47:40 2007 -0600
21967 bootm/fdt: Only process the fdt if an fdt address was provided
21969 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
21970 kernels using the board info structure (instead of passing a device tree)
21971 This change allows the old style booting to be used if the fdt argument
21972 was not passed to 'bootm'.
21977 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
21979 Date: Thu Sep 6 09:46:23 2007 -0600
21981 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
21983 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
21985 Tested on: lite5200b
21987 Note: the fixup functions have not been moved to a common place. This
21988 patch is targeted for immediate merging as in solves a build issue, but
21989 the final name/location of the fixups is still subject to debate. I
21990 propose to merge this now, and move the fixups in the next merge window
21991 to be usable by all targets.
21995 commit 41bb76e941929f54a73206fb132f7a4c275543a3
21997 Date: Thu Sep 6 09:46:17 2007 -0600
21999 libfdt: add convenience function fdt_find_and_setprop()
22001 Given the path to a node, fdt_find_and_setprop() allows a property value
22002 to be set directly.
22006 commit 80767a6cead9990d9e77e62be947843c2c72f469
22008 Date: Wed Sep 5 16:04:41 2007 +0100
22010 Changed API name to coloured_led.h
22011 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
22012 Tidied other cpu/arm920t/start.S code
22014 commit 56a9270521baaa00e12639a978302a67f61ef060
22016 Date: Thu Aug 30 16:18:18 2007 -0500
22018 Fix ULI RTC support on MPC8544 DS
22020 The RTC on the M1575 ULI chipset requires a dummy read before
22021 we are able to talk to the RTC. We accomplish this by adding a
22022 second memory region to the PHB the ULI is on and read from it.
22024 The second region is added to maintain compatiabilty with Linux's
22025 view of the PCI memory map.
22029 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
22031 Date: Thu Aug 30 01:58:48 2007 -0500
22033 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
22035 pcie is now differentiated from pci. Add 8641 bus-range updates.
22039 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
22041 Date: Tue Sep 4 16:18:38 2007 +0100
22043 Add coloured led interface for ARM boards.
22044 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
22046 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
22048 Date: Tue Sep 4 14:49:28 2007 +0100
22050 Move include/led.h to board/at91rm9200dk
22052 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
22054 Date: Tue Sep 4 14:25:51 2007 +0100
22056 Ran Lindent on drivers/at45.c
22058 commit 557ab89d294f08dd532f21d19861b40093200a33
22060 Date: Tue Sep 4 14:23:50 2007 +0100
22062 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
22064 commit 81b73dec16fd1227369a191e725e10044a9d56b8
22066 Date: Fri Aug 31 15:21:46 2007 +0200
22068 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
22070 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
22071 set to non-zero, because it doesn't support MRM (memory-read-
22072 multiple) correctly. We now added the possibility to configure
22073 this register in the board config file, so that the default value
22074 of 8 can be overridden.
22076 Here the details of this patch:
22078 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
22079 board-specific settings. As an example the sequoia board requires 0.
22081 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
22083 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
22084 CFG_PCI_CACHE_LINE_SIZE to 0.
22089 commit 60174746c668b309378a91488dded898e9553eae
22091 Date: Fri Aug 31 10:01:51 2007 +0200
22093 Fix TFTP OACK code for short packets.
22095 The old code had a loop limit overflow bug which caused a semi-
22096 infinite loop for small packets, because in "i<len-8", "i" was signed,
22097 but "len" was unsigned, and "len-8" became a huge number for small
22100 This is a workaround which replaces broken commit 8f1bc284.
22104 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
22106 Date: Thu Aug 30 15:03:05 2007 +0200
22108 Reduce BOOTDELAY variable to 1 second by default for STK1002
22113 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
22115 Date: Thu Aug 30 15:03:04 2007 +0200
22117 Remove double quotation marks around MAC address for STK1002
22122 commit ff13ac8c7bbebb238e339592de765c546dba1073
22124 Date: Thu Aug 30 14:42:15 2007 +0200
22126 Backout commit 8f1bc284 as it causes TFTP to fail.
22130 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
22132 Date: Thu Aug 30 02:26:17 2007 -0500
22134 Revert "Fix MPC8544DS PCIe3 scsi."
22136 This reverts commit 9468e680.
22137 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
22141 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
22143 Date: Wed Aug 29 18:26:24 2007 -0600
22145 tftp: don't implicity trust the format of recevied packets
22147 The TFTP OACK code trusts that the incoming packet is formated as
22148 ASCII text and can be processed by string functions. It also has a
22149 loop limit overflow bug where if the packet length is less than 8, it
22150 ends up looping over *all* of memory to find the 'blksize' string.
22152 This patch solves the problem by forcing the packet to be null
22153 terminated and using strstr() to search for the sub string.
22157 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
22159 Date: Wed Aug 29 16:31:18 2007 +0200
22161 ppc4xx: Change lwmon5 default environment to support Linux RTC
22163 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
22164 to supply the RTC I2C address as bootline parameter. This patch
22165 adds support for this rtc probing parameter to the bootargs:
22167 "rtc-pcf8563.probe=0,0x51"
22171 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
22173 Date: Wed Aug 29 09:06:05 2007 -0500
22175 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
22177 this had slipped through the cracks, since the sbc board was added
22178 after I wrote the original patch to remove all these symbols, and
22179 before it was merged.
22183 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
22185 Date: Wed Aug 29 14:05:30 2007 +0200
22187 Add mii_init() prototype
22189 to get rid of a *lot* of compiler warnings.
22193 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
22195 Date: Wed Aug 29 13:35:03 2007 +0200
22197 Disable network support on cmi_mpc5xx board
22199 ..because it caused compiler errors and there seems to be no
22200 board maintainer to take care of this.
22204 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
22206 Date: Mon Aug 20 09:44:00 2007 -0500
22208 Fix MPC8544DS PCIe3 scsi.
22212 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
22213 is allocating memory space it doesn't need.
22218 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
22220 Date: Tue Aug 21 09:38:59 2007 -0500
22224 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
22225 correct consoledev needed for linux boot.
22226 Standardize on fdt{file,addr} var to hold dtb file name.
22228 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
22232 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
22234 Date: Thu Aug 23 15:20:54 2007 -0400
22236 Enable L2 cache for MPC8568MDS board
22238 The L2 cache size is 512KB for 8568, print out the correct informaiton.
22242 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
22244 Date: Wed Aug 22 17:54:49 2007 +0800
22246 Remove the bios emulator binary files from MAI board
22250 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
22252 Date: Tue Aug 21 17:00:17 2007 -0500
22254 support board vendor-common makefiles
22256 if a board/$(VENDOR)/common/Makefile exists, build it.
22258 also add the first such case, board/freescale/common/Makefile, to
22259 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
22260 dictated by board configuration.
22262 thusly get rid of alternate build dir errors such as:
22264 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
22266 by putting the common/ mkdir command in its proper place (the common
22267 Makefile). Common bits from existing individual board Makefiles have
22272 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
22274 Date: Tue Aug 21 15:52:33 2007 +0200
22276 Fix: TFTP is not working on little endian systems
22278 TFTP does not work anymore after multicast tftp
22279 patch was applied on little endian systems.
22284 commit 5f470948570526e9186f053a3003da7719604e90
22286 Date: Tue Aug 21 15:50:33 2007 +0200
22288 Fix MAC address setting in DM9000 driver.
22290 The logic to check if there is a correct MAC address in the DM9000
22291 EEPROM, added in the last patch, is wrong. Now the MAC address is
22292 always taken from the environment, even if a suitable MAC is present
22297 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
22299 Date: Tue Aug 21 12:40:34 2007 +0200
22301 MPC5xxx: fix some compiler warnings in USB code
22303 Fix the following warnings:
22304 - usb.c:xx: warning: function declaration isn't a prototype
22305 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
22306 from pointer wihtout a cast
22310 commit 16e23c3f5dab6937f5109365416808c7f15c122b
22312 Date: Mon Aug 20 23:55:33 2007 -0500
22314 fsl_pci_init - Remove self PCSRBAR allocation
22316 CPU physical address space was being wasted by allocating a
22317 PCSRBAR PCI inbound region to it's memory space.
22319 As a rule, PCSRBAR should be left alone since it does not affect
22320 transactions from self and other masters may have changed it.
22324 commit 0e700ce03a23bb1921149bc77008ace7103d5289
22326 Date: Mon Aug 20 13:56:47 2007 +0200
22328 Fix compiler warning in include/s3c2410.h
22330 This patch fixes the "type qualifiers ignored on fuction return tpye"
22331 warning for include/s3c2410.h
22335 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
22337 Date: Mon Aug 20 07:09:05 2007 +0200
22339 Fix compilation error for omap2420h4_config.
22341 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
22342 and flash_probe() calls in env_flash.c.
22346 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
22348 Date: Fri Aug 10 14:34:14 2007 -0500
22350 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
22352 and make some minor corrections to the FDT part of the README.
22356 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
22358 Date: Wed Aug 29 01:32:05 2007 +0200
22360 Minor coding style cleanup.
22364 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
22366 Date: Tue Aug 28 17:40:33 2007 +0200
22368 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
22372 commit f98984cb194bb34dbe1db9429d3b51133af30d07
22374 Date: Tue Aug 28 17:39:14 2007 +0200
22376 IDE: - make ide_inb () and ide_outb () "weak", so boards can
22377 define there own I/O functions.
22378 (Needed for the pcs440ep board).
22379 - The default I/O Functions are again 8 Bit accesses.
22380 - Added CONFIG_CMD_IDE for the pcs440ep Board.
22384 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
22386 Date: Mon Aug 20 19:00:01 2007 +0300
22388 AVR32: Change prototype of memset
22393 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
22395 Date: Sat Aug 25 05:07:16 2007 +0200
22397 POST: limit memory test area to not touch global data anymore
22399 As experienced on lwmon5, on some boards the POST memory test can
22400 corrupt the global data buffer (bd). This patch fixes this issue
22401 by checking and limiting this area.
22406 commit 75e1a84d483e36be10e206e539b028c4889e1158
22408 Date: Fri Aug 24 15:41:42 2007 +0200
22410 ppc4xx: Add RTC POST test to lwmon5 board configuration
22412 Since this RTC POST test is taking quite a while to complete
22413 it's only initiated upon special keypress same as the complete
22418 commit d7bfa620037a6d2210159387571bdf93aa32c162
22420 Date: Fri Aug 24 15:19:10 2007 +0200
22422 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
22426 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
22428 Date: Thu Aug 23 11:02:37 2007 +0200
22430 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
22432 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
22433 board. Now the "eeprom" command can be used to read/write from/to this
22434 device. Additionally a new command was added "eepromwp" to en-/disable
22435 the write-protect of this 2nd EEPROM.
22437 The 1st EEPROM is not affected by this write-protect command.
22441 commit c64fb30e4c5976007d56fc1789c7a0666082b536
22443 Date: Wed Aug 22 08:56:09 2007 +0200
22445 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
22449 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
22451 Date: Tue Aug 21 16:27:57 2007 +0200
22453 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
22455 This patch adds support for the matrix keyboard on the lwmon5 board.
22456 Since the implementation in the dsPCI is kind of compatible with the
22457 "old" lwmon board, most of the code is copied from the lwmon
22462 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
22464 Date: Sun Aug 19 10:27:34 2007 +0200
22466 Fix some build errors.
22470 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
22472 Date: Sat Aug 18 22:00:38 2007 +0200
22476 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
22478 Date: Thu Aug 16 22:52:39 2007 -0500
22480 lib_ppc: make board_add_ram_info weak
22482 platforms wishing to display RAM diagnostics in addition to size,
22483 can do so, on one line, in their own board_add_ram_info()
22486 this consequently eliminates CONFIG_ADD_RAM_INFO.
22488 Thanks to Stefan for the hint.
22492 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
22494 Date: Fri Aug 17 12:43:44 2007 +0900
22496 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
22498 This patch has been sent on:
22501 Many users of PCI config read routines tend to ignore the function
22502 ret value, and are only concerned about the contents of *val. Based
22503 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
22504 the *val on dword read error.
22506 Without this fix, for example, we'll go on scanning bus with vendor or
22507 header_type uninitialized. This brings many unnecessary config trials.
22511 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
22513 Date: Sat Aug 18 14:37:52 2007 +0200
22515 ColdFire: Fix some remaining problems with CFG_CMD_
22519 commit 8280f6a1c43247616b68224675188e5ccd124650
22521 Date: Sat Aug 18 14:33:02 2007 +0200
22523 Coding style cleanup
22527 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
22529 Date: Thu Aug 16 19:23:50 2007 -0500
22531 ColdFire: Add M5235EVB Platform for MCF523x
22535 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
22537 Date: Fri Aug 17 09:30:00 2007 -0500
22539 mpc83xx: fix typo in DDR2 programming
22541 introduced in the implement board_add_ram_info patch as I was cleaning out the
22542 magic numbers. sorry.
22546 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
22548 Date: Thu Aug 16 22:53:09 2007 -0500
22550 mpc83xx: move freescale boards to boards/freescale
22552 includes build fixes.
22556 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
22558 Date: Thu Aug 16 22:52:59 2007 -0500
22560 mpc83xx: suppress unused variable 'val8' warning
22564 commit bbea46f76f767b919070b4829bf34c86bd223248
22566 Date: Thu Aug 16 22:52:48 2007 -0500
22568 mpc83xx: implement board_add_ram_info
22570 add board_add_ram_info, to make memory diagnostic output more
22571 consistent. u-boot banner output now looks like:
22573 DRAM: 256 MB (DDR1, 64-bit, ECC on)
22575 and for boards with SDRAM on the local bus, a line such as this is
22578 SDRAM: 64 MB (local bus)
22580 also replaced some magic numbers with their equivalent define names.
22584 commit 14778585d1389d86d5846efec29e5fce892680ce
22586 Date: Fri Aug 17 10:35:59 2007 +0800
22588 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
22590 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
22591 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
22595 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
22597 Date: Thu Aug 16 15:05:11 2007 -0500
22599 ColdFire: Add M54455EVB for MCF5445x
22603 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
22605 Date: Thu Aug 16 13:20:50 2007 -0500
22607 ColdFire: Add M5253EVBE platform for MCF52x2
22611 commit a605aacd8324094199402816cc6d9124aba57b8d
22613 Date: Thu Aug 16 05:04:31 2007 -0500
22615 ColdFire: Add M5249EVB platform for MCF52x2
22619 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
22621 Date: Wed Aug 15 20:32:06 2007 -0500
22623 ColdFire: Update Freescale MCF52x2 platforms
22627 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
22629 Date: Wed Aug 15 19:55:10 2007 -0500
22631 ColdFire: Update EB+MCF-EV123 platform
22635 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
22637 Date: Wed Aug 15 19:46:38 2007 -0500
22639 ColdFire: update TASREG platform for MCF52x2
22643 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
22645 Date: Wed Aug 15 19:45:51 2007 -0500
22647 ColdFire: update r5200 platform for MCF52x2
22651 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
22653 Date: Wed Aug 15 19:43:20 2007 -0500
22655 ColdFire: idmr platform MCF52x2 update
22659 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
22661 Date: Wed Aug 15 19:41:06 2007 -0500
22663 ColdFire: cobra5272 platform for MCF52x2 update
22667 commit 56115665b4a64c10c01440c57749b265e0908fa4
22669 Date: Wed Aug 15 19:38:15 2007 -0500
22671 ColdFire: MCF52x2 Header files update
22675 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
22677 Date: Wed Aug 15 19:21:21 2007 -0500
22679 ColdFire: MCF52x2 update
22683 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
22685 Date: Wed Aug 15 18:46:11 2007 -0500
22687 ColdFire: MCF5329 update cache
22691 commit 7171977fb8fd77cfb6676953fa9a05789c450513
22693 Date: Wed Aug 15 15:40:20 2007 -0500
22695 ColdFire: MCF5329 header file clean up
22699 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
22701 Date: Wed Aug 15 15:39:17 2007 -0500
22703 ColdFire: MCF5329 Update and cleanup
22707 commit 10327dc5541f947c0cf7e31fef86c4706169607a
22709 Date: Thu Aug 16 16:35:02 2007 -0500
22711 Add CONFIG_HAS_ETH0 to all boards with TSEC
22713 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
22714 to update TSEC1's device-tree node, so we need to add it
22715 to all the boards with TSECs. Do this for 83xx and 86xx, too,
22716 since they will eventually do something similar.
22720 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
22722 Date: Thu Aug 16 15:05:04 2007 -0500
22724 Update MPC8544 DS PCI memory map
22726 The PCIe bus that the ULI M1575 is connected to has no possible way of
22727 needing more than the fixed amount of IO & Memory space needed by the ULI.
22729 So make it use far less IO & memory space and have it use the shared LAW. This
22730 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
22735 commit ea5877e31ed63ade948fd1293895ec23fe01472e
22737 Date: Thu Aug 16 11:01:21 2007 -0500
22739 Fix up some fdt issues on 8544DS
22741 It looks like we had a merge issue that duplicated a bit of code
22742 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
22743 the MAC address properly set in the device tree on boot for TSEC1
22747 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
22749 Date: Thu Aug 16 15:16:03 2007 +0200
22751 PPC4xx:HCU4/5 cleanup
22753 Minor cleanups to confirm to the u-boot coding style.
22754 Some german expressions -> english.
22755 HCU5 enforces a unique IP adress for a given slot in the rack.
22759 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
22761 Date: Thu Aug 16 15:16:02 2007 +0200
22763 PPC4xx:HCU4/5 cleanup ecc/sdram init
22765 Make ecc initialisation robust, as DDR2-ECC errors may be generated
22766 while zeroing the RAM.
22768 Return 16 bytes (a cacheline) less than the available memory, as the
22769 board and/or PPC440EPx might have problems accessing the last bytes.
22773 commit d35b508a55508535b6e8445b718585d27df733d3
22775 Date: Wed Aug 15 22:29:56 2007 -0500
22777 fdt: suppress unused variable 'bd' warning
22781 commit 82bd9ee77490588d4da785d75829ca63d0176baf
22783 Date: Wed Aug 15 20:06:50 2007 -0500
22785 Fix warnings from of_data copy fix
22787 Forgot to cast of_flat_tree to ulong.
22791 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
22793 Date: Wed Aug 15 20:03:44 2007 -0500
22795 Don't wait for disconnected TSECs
22797 The TSEC driver's PHY code waits a long time for autonegotiation to
22798 complete, even if the link is down. The PHY knows the link is
22799 down or up before autonegotiation completes, so we can short-circuit
22800 the process if the link is down.
22804 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
22806 Date: Wed Aug 15 20:03:34 2007 -0500
22808 Fix numerous bugs in the 8568 UEC support
22810 Actually, fixed a large bug in the UEC for *all* platforms.
22811 How did this ever work?
22813 uec_init() did not follow the spec for eth_init(), and returned
22814 0 on success. Switch it to return the link like tsec_init()
22817 The immap for the 8568 was defined based on MPC8568, rather than
22822 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
22824 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
22829 commit 3a79013e2adda53332dfd0b511066a805e929a9d
22831 Date: Wed Aug 15 20:03:25 2007 -0500
22833 Define tsec flag values in config files
22835 The tsec_info structure and array has a "flags" field for each
22836 ethernet controller. This field is the only reason there are
22837 settings. Switch to defining TSECn_FLAGS for each controller
22838 in the config header, and we can greatly simplify the array, and
22839 also simplify the addition of future boards.
22843 commit ec7238229507e7f47533a611ea8c53319d234cf3
22845 Date: Wed Aug 15 20:03:13 2007 -0500
22847 Add support for building all boards with a TSEC
22849 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
22850 Now we can do a MAKEALL test on all of them!
22854 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
22856 Date: Wed Aug 15 17:30:56 2007 -0500
22858 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
22860 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
22861 neglected to *also* put the code inside the similar #ifdef
22862 for CONFIG_OF_FLAT_TREE.
22866 commit 78f9fef7f406078c8bf7191e665a73f795157746
22868 Date: Wed Aug 15 15:46:46 2007 -0500
22870 mpc885ads: Don't define CONFIG_BZIP2.
22872 bzip2 requires a significant chunk of malloc space, and there isn't
22873 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
22874 and a downloaded image at 0x400000.
22878 commit 002275a3ed8b114885f6702d6d544d0780dfe689
22880 Date: Thu Aug 16 08:54:10 2007 +0200
22882 Bios emulator - fix microblaze toolchain problem
22884 microblaze CPU have problem with bios_emulator code.
22885 Microblaze toolchain doesn't support PRAGMA PACK.
22889 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
22891 Date: Thu Aug 16 11:51:04 2007 +0200
22893 Minor Coding Style fix; Update CHANGELOG file.
22897 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
22899 Date: Thu Aug 16 11:21:49 2007 +0200
22901 ppc4xx: Remove #warning in esd auto_update.c
22905 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
22907 Date: Fri Jun 22 17:32:28 2007 +0200
22909 ppc7xx: Update CPCI750 board
22911 This small CPCI750 update extends the board specific command
22912 "show_config" to display the Marvell strapping registers and
22913 extends the PCI IDE controller.
22918 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
22920 Date: Thu Aug 16 10:46:28 2007 +0200
22922 [FIX] Changes for bios_emulator code for others architecture
22924 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
22926 Date: Thu Aug 16 10:45:09 2007 +0200
22928 [FIX] Remove unused include file
22930 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
22932 Date: Thu Aug 16 10:18:33 2007 +0200
22934 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
22938 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
22940 Date: Thu Aug 16 09:54:51 2007 +0200
22942 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
22946 commit 02ba7022f62bb75908296c58c63866e1d294b69a
22948 Date: Thu Aug 16 09:52:29 2007 +0200
22950 ppc4xx: Update Sequoia/Rainier bootstrap command
22952 As suggested by David Mitchell, here an update for the Sequoia/Rainier
22957 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
22959 Date: Wed Aug 15 22:30:39 2007 -0500
22961 mpc83xx: enable libfdt by default on freescale boards
22963 this enables libfdt code by default for the
22964 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
22965 mpc8349itx and gp boards.
22969 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
22971 Date: Wed Aug 15 22:30:33 2007 -0500
22973 mpc83xx: migrate remaining freescale boards to libfdt
22975 this adds libfdt support code for the freescale
22976 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
22979 Boards remain compatible with OF_FLAT_TREE.
22983 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
22985 Date: Wed Aug 15 22:30:26 2007 -0500
22987 mpc83xx: move common /memory node update mechanism to cpu.c
22989 also adds common prototypes to include/common.h.
22993 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
22995 Date: Wed Aug 15 22:30:19 2007 -0500
22997 mpc83xx: remaining 8360 libfdt fixes
22999 PCI clocks and QE frequencies weren't being updated, and the core clock
23000 was being updated incorrectly. This patch also adds a /memory node if
23001 it doesn't already exist prior to update.
23003 plus some cosmetic trimming to single line comments.
23007 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
23009 Date: Wed Aug 15 22:30:12 2007 -0500
23011 mpc83xx: fix UEC2->1 typo in libfdt setup code
23015 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
23017 Date: Wed Aug 15 22:30:05 2007 -0500
23019 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
23021 and reorder the existing 83xx maintainers alpha.
23025 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
23027 Date: Wed Aug 15 21:15:05 2007 +0200
23029 [FIX] Resolve problem with warnings
23030 microblaze toolchain don't support PRAGMA PACK.
23032 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
23034 Date: Wed Aug 15 21:05:07 2007 +0200
23036 [FIX] Correction command setting for Microblaze boards
23038 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
23040 Date: Wed Aug 15 21:03:41 2007 +0200
23042 [FIX] Correction command definition
23044 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
23046 Date: Wed Aug 15 11:55:35 2007 -0500
23048 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
23050 Remove a leftover in net/tftp.c while we're at it.
23054 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
23056 Date: Wed Aug 15 12:20:40 2007 -0500
23058 Move the MPC8641HPCN board under board/freescale.
23060 Minor path corrections needed to ensure buildability.
23064 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
23066 Date: Wed Aug 15 11:46:22 2007 -0500
23068 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
23070 Remove a leftover in net/tftp.c while we're at it.
23074 commit 210f463c71917b7a4495c2103c228b9c179ae64d
23076 Date: Wed Aug 15 11:13:15 2007 -0400
23078 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
23080 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
23081 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
23082 when it should have gone inside of the conditional. As a result, it
23083 broke non-LIBFDT board builds.
23085 Also added a missing "not." to the comment.
23089 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
23091 Date: Wed Aug 15 12:14:23 2007 +0200
23093 PPC4xx:HCU4/5-Board fix compile warning
23097 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
23099 Date: Tue Aug 14 14:06:45 2007 -0500
23101 Fix malloc size error in ahci_init_one.
23103 Typically this causes scsi init to corrupt the
23104 devlist and break the coninfo command.
23105 Fix a compiler size warning.
23111 commit b361acd64fd2525c081b9b288b0804efe209c0e9
23113 Date: Tue Aug 14 10:02:16 2007 -0700
23115 TI DaVinci - fix unsupported %hhx format
23119 commit f01dbb5424a81453c81190dd30e945891466f621
23121 Date: Tue Aug 14 18:42:36 2007 +0200
23123 Coding style cleanup. Update CHANGELOG.
23127 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
23129 Date: Tue Aug 14 10:32:59 2007 -0500
23131 Fix initrd/dtb interaction
23133 The original code would wrongly relocate the blob to be right before
23134 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
23135 if it is defined. So we make two changes:
23137 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
23139 2) If the blob is being relocated, relocate it before kbd, not initrd
23143 commit e54b970173769307a116bd34028b6d0c2eea2a4e
23145 Date: Tue Aug 14 15:40:00 2007 +0100
23147 Supply spi interface in at45.c
23149 commit 4ce846ec59f36b85d6644a769690ad3feb667575
23151 Date: Tue Aug 14 15:12:01 2007 +0200
23153 POST: Fix merge problem
23157 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
23159 Date: Tue Aug 14 15:03:17 2007 +0200
23161 Coding style cleanup
23165 commit 779e975117a75e91fcebe226a63104dbfb924ab1
23167 Date: Tue Aug 14 14:44:41 2007 +0200
23169 ppc4xx: Add initial Zeus (PPC405EP) board support
23173 commit c5a172a5fd636c12467429e3f7910e53773979c6
23175 Date: Tue Aug 14 14:41:55 2007 +0200
23177 POST: Add option for external ethernet loopback test
23179 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
23180 is not done using an internal loopback connection, but by assuming
23181 that an external loopback connector is plugged into the board.
23185 commit eb2b4010ae426245172988804ee8d9193fb41038
23187 Date: Tue Aug 14 14:39:44 2007 +0200
23189 POST: Add ppc405 support to cache and UART POST
23193 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
23195 Date: Tue Aug 14 10:46:32 2007 +0100
23197 Replace lost end of at45.c.
23199 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
23201 Date: Tue Aug 14 10:30:06 2007 +0100
23203 Update Makefiles for merged and split at45.c.
23205 commit 3454cece2db57cb9eb7087995f7e73066a163f71
23207 Date: Tue Aug 14 10:21:06 2007 +0100
23209 Delete the merged files.
23211 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
23213 Date: Tue Aug 14 10:14:05 2007 +0100
23217 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
23219 Date: Tue Aug 14 10:10:52 2007 +0100
23221 Add MACH_TYPE records for several AT91 boards.
23222 Merge to two at45.c files into a common file, split to at45.c and spi.c
23223 Fix spelling error in DM9161 PHY Support.
23224 Initialize at91rm9200 board (and set LED).
23225 Add PIO control for at91rm9200dk LEDs and Mux.
23226 Change dataflash partition boundaries to be compatible with Linux 2.6.
23231 commit 4ef35e53c693556c54b0c22d6f873de87bade253
23233 Date: Tue Aug 14 09:54:46 2007 +0200
23235 Coding style cleanup, update CHANGELOG
23239 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
23241 Date: Tue Aug 14 09:47:27 2007 +0200
23243 Coding style cleanup; rebuild CHANGELOG
23245 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
23246 Author: Randy Vinson <rvinson@linuxbox.(none)>
23247 Date: Tue Feb 27 19:42:22 2007 -0700
23249 85xxCDS: Add make targets for legacy systems.
23251 The PCI ID select values on the Arcadia main board differ depending
23252 on the version of the hardware. The standard configuration supports
23253 Rev 3.1. The legacy target supports Rev 2.x.
23257 commit e41094c7e38177c755fbd9b182018069614f080d
23259 Date: Tue Aug 14 01:50:09 2007 -0500
23261 85xxCDS: Enable the VIA PCI-to-ISA bridge.
23263 Author: Randy Vinson <rvinson@linuxbox.(none)>
23265 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
23266 Arcadia main board.
23271 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
23273 Date: Tue Aug 14 00:14:25 2007 -0500
23275 Add support for UEC to 8568
23280 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
23282 Date: Tue Jun 19 14:18:34 2007 -0400
23284 Add PCI support for MPC8568MDS board
23286 This patch is against u-boot-mpc85xx.git of www.denx.com
23291 commit d111d6382c99fdea08c2312eeeae8786945e189a
23293 Date: Tue Jun 19 14:18:32 2007 -0400
23295 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
23297 This patch is against u-boot-mpc85xx.git of www.denx.com
23299 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
23300 both MPC8548CDS board and MPC8568MDS board, especially for supporting
23303 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
23304 DDR2 on all current board versions especially ver 1.92 or later to bring
23309 commit 3db0bef59eab1155801618cef5c481e97553b597
23311 Date: Tue Aug 7 18:07:27 2007 -0500
23313 Use an absolute address when jumping out of 4k boot page
23315 On e500 when we leave the 4k boot page we should use an absolute address since
23316 we don't know where the board code may want us to be really running at.
23320 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
23322 Date: Mon Aug 13 14:49:59 2007 -0500
23324 MPC85xx BA bits not set for 3-bit bank address DIMM
23326 The current implementation does not set the number of bank address bits
23327 (BA) in the processor. The default assumes 2 logical bank bits. This
23328 works fine for a DIMM that uses devices with 4 internal banks (SPD
23329 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
23330 devices with 8 internal banks (SPD byte17 = 0x8).
23334 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
23336 Date: Mon Aug 13 14:38:06 2007 -0500
23338 Fix minor 85xx warnings
23340 Some patches had inserted warnings into the build:
23341 * mpc8560ads declared data without using it
23342 * cpu_init declared ecm and immap without using it in all CONFIGs
23343 * MPC8548CDS.h had its default filenames changed so that they contained
23344 "\m" in the paths. Made the defaults not Windows-specific (or
23349 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
23351 Date: Fri Jul 27 01:50:52 2007 -0500
23353 8548cds PCIE support.
23355 Make the early L1 cache stack region guarded to prevent speculative
23356 fetches outside the locked range.
23358 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
23359 init.S whitespace cleanup.
23361 Allow TEXT_BASE value to be specified on command line. This allows it
23362 to be set to 0xfffc0000 which cuts the uboot binary in half.
23364 Clear and enable lbc and ecm errors.
23366 Update last_busno in device-tree for pci and pcie.
23368 Remove load of obsolete cpu/mpc85xx/pci.0
23373 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
23375 Date: Fri Jul 27 01:50:51 2007 -0500
23377 8544ds PCIE support
23379 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
23381 Enable LBC and ECM errors and clear error registers.
23383 Add tftpflash env var to get uboot from tftp server and flash it.
23385 Add pci/pcie convenience env vars to display register space:
23386 "run pcie3regs" to see all pcie3 ccsr registers
23387 "run pcie3cfg" to see all cfg registers
23388 Whitespace cleanup and MPC8544DS.h
23390 Enable CONFIG_INTERRUPTS.
23395 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
23397 Date: Tue Aug 14 01:34:21 2007 -0500
23399 85xx start.S cleanup and exception support
23403 Support external interrupts from platform to eliminate system hangs.
23404 Define CONFIG_INTERRUPTS board configure option to enable.
23405 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
23407 Remove extra cpu initialization redundant with hardware initialization.
23408 Whitespace cleanup.
23410 Define and use _START_OFFSET consistent with other processors using
23413 Move additional code from .text to boot page to make room for
23414 exception vectors at start of image.
23416 Handle Machine Check, External and Critical exceptions.
23418 Fix e500 machine check error determination in traps.c
23420 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
23425 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
23427 Date: Tue Aug 14 01:33:18 2007 -0500
23429 Add MPC8544DS README
23433 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
23435 Date: Fri Jul 27 01:50:48 2007 -0500
23437 85xx allow debugger to configure ddr.
23439 Only check for mpc8548 rev 1 when compiled for 8548.
23444 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
23446 Date: Fri Jul 27 01:50:47 2007 -0500
23448 mpc85xx L2 cache reporting and SRAM relocation option.
23450 Allow debugger to override flash cs0/cs1 settings to enable alternate
23456 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
23458 Date: Fri Jul 27 01:50:46 2007 -0500
23460 e500 needs ppc_asm.tmp MCK_EXCEPTION
23462 Always define MCK_EXCEPTION macro - so e500 can use it too.
23467 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
23469 Date: Mon Jun 11 10:41:07 2007 -0500
23471 multicast tftp: RFC2090
23473 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
23474 on Realtek RTL8139 and Freescale TSEC.
23479 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
23481 Date: Sat Jul 28 10:56:13 2007 -0400
23483 New CONFIG_BOOTP_SERVERIP option
23485 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
23486 from the bootp server
23491 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
23493 Date: Sun Aug 12 08:48:27 2007 +0300
23495 Add ability to take MAC address from the environment to DM9000 driver
23500 commit be5d72d10d47609326226225181e301fb9a33b58
23502 Date: Mon Aug 13 21:57:53 2007 +0200
23504 Minor coding style cleanup. Update CHANGELOG.
23508 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
23510 Date: Sat Aug 11 06:54:58 2007 -0500
23512 Modify SBC8641D to use new Freescale PCI routines
23514 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
23520 commit a08458303e7f9db67f296980036d3292c35cb45c
23522 Date: Fri Jun 29 18:38:51 2007 +0200
23524 atmel_mci: Fix data timeout value
23526 Calculate the data timeout based on values from the CSD instead of
23527 just using a hardcoded DTOR value. This is a backport of a similar fix
23528 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
23533 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
23535 Date: Mon Aug 13 17:22:31 2007 +0200
23537 AVR32: Include <div64.h> instead of <asm/div64.h>
23539 include/asm-avr32/div64.h was recently moved to include/div64.h, but
23540 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
23541 the patch was merged perhaps?)
23543 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
23548 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
23550 Date: Wed Jun 27 13:34:26 2007 +0200
23552 atmel_mci: Use 512 byte blocksize if possible
23554 Instead of always using the largest blocksize the card supports, check
23555 if it can support smaller block sizes and use 512 bytes if possible.
23556 Most cards do support this, and other parts of u-boot seem to have
23557 trouble with block sizes different from 512 bytes.
23559 Also enable underrun/overrun protection.
23564 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
23566 Date: Mon Aug 13 09:05:33 2007 +0200
23568 ppc4xx: Fix problem in PLL clock calculation
23571 and fixes a bug in the PLL clock calculation.
23575 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
23577 Date: Sun Aug 12 21:34:50 2007 +0200
23581 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
23583 Date: Sun Aug 12 21:34:34 2007 +0200
23585 Minor alignment of output, 2nd try.
23586 Also update CHANGELOG
23590 commit 6b309f22a724fad8418e811751a0741b893419cf
23592 Date: Sun Aug 12 20:35:49 2007 +0200
23594 Minor alignment of output
23598 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
23600 Date: Sun Aug 12 18:28:18 2007 +0200
23602 Cleanup output on ADS5121 board
23604 Signed-off-by: Wolfgang Denk
23606 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
23608 Date: Sun Aug 12 15:11:38 2007 +0200
23610 Adapt board configuration and fix kernel crash on MCC200 board.
23612 The update procedure was modified to turn off the USB subsystem
23613 before exit for MCC200 and TRAB. This is necessary as otherwise the
23614 USB controller continues to write periodically to system memory!
23616 MCC200-specific notes:
23617 - the patch disables the magic key check for MCC200
23618 - the patch contains the configuration changes made
23619 for the new revision of the board.
23624 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
23626 Date: Sun Aug 12 14:47:54 2007 +0200
23628 Adjust default configuration of ADS5121 board.
23632 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
23634 Date: Sun Aug 12 14:27:39 2007 +0200
23636 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
23640 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
23642 Date: Tue Aug 7 21:14:22 2007 -0400
23644 Improve error print messages.
23648 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
23650 Date: Tue Jul 17 13:57:04 2007 -0500
23652 fdt: allow for builds that don't want env and bd_t nodes
23654 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
23659 commit 91148bf7aeba142d6f348805db7625db7da64d6f
23661 Date: Tue Jul 17 13:56:53 2007 -0500
23663 fdt: do board setup based on fdt address specified on bootm line
23665 The last fdt patch to bootm did board setup based on the address
23666 specified by a prior fdt address command invocation. The bootm
23667 code, as its call to fdt_chosen does, should use the fdt specified
23668 by the user on the bootm command. Note this restores full
23669 functionality for the 8360's existing default boot environment
23670 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
23671 before booting a kernel).
23675 commit e125a2ffc209dd34794e326c7175658253beadf3
23677 Date: Tue Jul 10 20:40:39 2007 -0400
23679 Call ft_board_setup() from the bootm command.
23681 In the patch titled "Create new fdt boardsetup command..." I removed the
23682 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
23683 to add a direct call back into cmd_bootm.c
23685 This fixes the oversight by adding the direct call to the bootm command.
23689 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
23691 Date: Mon Jun 25 23:25:28 2007 -0400
23693 Create new fdt boardsetup command, fix bug parsing [] form of set values.
23695 Previously ft_board_setup() was called by fdt_chosen() which was not
23696 really correctly structured. This splits ft_board_setup() out by creating
23697 a new fdt boardsetup command.
23699 Fix a bug when parsing fdt set command values which have the square
23700 bracket form [00 11 22 33] - the length was updated incorrectly in when
23705 commit 6f35ded9e85493595e0eb66a82b502a95326d049
23707 Date: Mon Jun 25 20:55:58 2007 -0400
23709 Tighten up the error messages.
23713 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
23715 Date: Mon Jun 25 19:52:23 2007 -0400
23717 Asthetic improvements: error messages and line lengths.
23719 Tighten up the error messages, split overlength lines.
23723 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
23725 Date: Fri May 25 22:08:57 2007 -0400
23727 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
23729 The fdt_chosen() function was adding/seting some properties ad-hoc
23730 improperly and duplicated (poorly) what was done in ft_board_setup()
23732 Clean up long lines (setting properties, printing errors).
23736 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
23738 Date: Mon May 21 23:27:16 2007 -0400
23740 For fdt_find_node_by_path(), handle the root path properly.
23742 Also removes the special case root path detection in cmd_fdt.c since it
23743 is no longer necessary.
23747 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
23749 Date: Thu May 17 23:54:36 2007 -0400
23751 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
23756 commit 1a861169bc3758f9de3aead62b058736c6891246
23758 Date: Wed Jun 6 22:47:58 2007 -0400
23760 Replace fdt_node_offset() with fdt_find_node_by_path().
23762 The new name matches more closely the kernel's name, which is also
23763 a much better description.
23768 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
23770 Date: Wed May 16 22:39:59 2007 -0400
23772 Fix cmd_fdt line lengths, refactor code.
23774 Break lines that were greater than 80 characters in length.
23775 Move the fdt print and property parsing code to separate static functions
23776 to reduce coding clutter in the fdt_cmd handling body.
23780 commit 25114033ab21788810c48ba4df103b649da1223b
23782 Date: Sat May 12 09:47:25 2007 -0400
23784 FDT command improvements.
23786 Fix "fdt set" so that it will create a non-existing property.
23787 Add "fdt mknode" to create nodes.
23791 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
23793 Date: Sat May 12 09:45:46 2007 -0400
23795 Reorganize and fix problems (returns) in the bootm command.
23797 Do *NOT* return after the "point of no return" has been passed.
23798 If something goes wrong, the board must be reset after that point.
23799 Move the "Transferring control to Linux" debug message back to where it
23800 belongs: just before transferring control to linux.
23804 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
23806 Date: Tue May 8 21:27:35 2007 -0400
23808 Fix bugs in the CONFIG_OF_LIBFDT
23810 Stupid coding mistakes (identified by Timur Tabi, thanks).
23814 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
23816 Date: Wed Apr 25 22:47:15 2007 -0400
23818 Improve fdt move length handling.
23820 Make the length parameter optional: if not specified, do the move using
23821 the current size unchanged.
23825 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
23827 Date: Wed Apr 25 22:23:36 2007 -0400
23829 Minor code clean up.
23831 Declare the variable fdt properly as extern.
23832 Call the "set_fn" function pointer the "short way" without the full
23833 dereferencing syntax.
23837 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
23839 Date: Wed Apr 25 21:24:27 2007 -0400
23841 Improve error messages, more informative.
23843 Print more than the raw libfdt error message strings. This is especially
23844 useful for cluing in the user when the bootm command aborts due to
23849 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
23851 Date: Fri Apr 20 22:46:53 2007 -0400
23853 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
23855 This is the way u-boot reduces configured-out code. At Wolfgang
23856 Grandegger and Wolfgang Denk's request, make libfdt conform.
23860 commit 923efd286411ed052d9e074f59f8986d6081061c
23862 Date: Fri Aug 10 14:54:47 2007 -0700
23864 add image size and descriptors for Spartan 3E FPGA chips
23866 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
23870 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
23872 Date: Fri Aug 10 15:34:48 2007 -0500
23874 make MAKEALL more immune to merge conflicts
23876 ..by placing board entries one per line, as suggested by jdl.
23880 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
23882 Date: Fri Aug 10 13:28:25 2007 -0500
23884 README: Remove outdated cpu type, board type, and NAME_config lists
23888 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
23890 Date: Fri Aug 10 15:48:59 2007 +0800
23892 mpc83xx: Suppress the warning 'burstlen'
23894 suppress the warning 'burstlen' of spd_sdram.
23898 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
23900 Date: Thu Aug 9 15:11:03 2007 -0500
23902 Add support for SBC8641D. Config files.
23904 Add support for Wind River's SBC8641D reference board.
23910 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
23912 Date: Thu Aug 9 15:10:53 2007 -0500
23914 Add support for SBC8641D. Board files.
23916 Add support for Wind River's SBC8641D reference board.
23922 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
23924 Date: Fri Aug 10 20:34:58 2007 +0200
23926 Conding style cleanup
23930 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
23932 Date: Fri Aug 10 20:26:18 2007 +0200
23934 [ARM] TI DaVinci support, hopefully final
23936 Add support for the following DaVinci boards:
23943 - Split into separate board directories
23944 - Removed changes to MTD_DEBUG (or whatever it's called)
23945 - New CONFIG_CMD party line followed
23946 - Some cosmetic fixes, cleanup etc.
23947 - Patches against the latest U-Boot tree as of now.
23948 - Fixed CONFIG_CMD_NET in net files.
23949 - Fixed CONFIG_CMD_EEPROM for schmoogie.
23950 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
23951 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
23952 but it at least compiles.
23954 Here is an excerpt from session log on SCHMOOGIE...
23956 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
23965 ETH PHY : DP83848 @ 0x01
23967 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
23968 U-Boot > ping 192.168.253.10
23969 host 192.168.253.10 is alive
23977 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
23979 Date: Fri Jul 27 01:50:45 2007 -0500
23981 fsl_pci_init cleanup.
23983 Do not enable normal errors created during probe (master abort, perr,
23984 and pcie Invalid Configuration access).
23986 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
23991 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
23993 Date: Fri Jul 27 01:50:44 2007 -0500
23995 pciauto_setup_device bars_num fix
23997 Passing bars_num=0 to pciauto_setup_device should assign no bars.
24003 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
24005 Date: Mon Aug 6 17:39:44 2007 -0500
24007 8641hpcn: Do correct sized pointer math.
24009 When I rebased Ed's patch and cleaned up a few compilation
24010 problems, I apparently rebased my brain on crack first.
24011 Fix that by doing (char *) sized pointer math as needed.
24015 commit cfc7a7f5bb3273c9951173c788001d45118f141f
24017 Date: Thu Aug 2 14:42:20 2007 -0500
24021 Remove rev 1 fixes.
24022 Always set PICGCR_MODE.
24023 Enable machine check and provide board config option
24024 to set and handle SoC error interrupts.
24026 Include MSSSR0 in error message.
24028 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
24033 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
24035 Date: Fri Aug 10 10:42:25 2007 +0200
24037 Coding style cleanup
24041 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
24043 Date: Thu Aug 2 17:42:08 2007 +0200
24045 Make use of generic 64bit division in nand_util.c
24047 Use generic 64bit division in nand_util.c. This makes nand_util.c
24048 independent of any toolchain 64bit division.
24052 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
24054 Date: Thu Aug 2 17:41:14 2007 +0200
24056 Move 64bit division from avr32 to generic lib
24058 Move the 64bit division from lib_avr32 to lib_generic. With this, all
24059 boards can do_div/__div64_32 if needed, not only avr one. Code is put
24060 to lib_generic, so no larger memory footprint if not used. No code
24061 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
24065 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
24067 Date: Fri Jul 27 11:31:22 2007 +0200
24069 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
24073 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
24075 Date: Fri Jul 27 11:30:33 2007 +0200
24077 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
24081 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
24083 Date: Fri Jul 27 11:38:26 2007 +0200
24085 Add PPC4xx-HCU4 and HCU5 boards: common files
24089 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
24091 Date: Fri Jul 27 11:28:44 2007 +0200
24093 Add PPC4xx-HCU4 and HCU5 boards: make related
24097 commit 137fdd9f474ecb853efdace5200576308c67f18d
24099 Date: Fri Jul 27 11:28:03 2007 +0200
24101 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
24105 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
24107 Date: Fri Jul 27 11:27:15 2007 +0200
24109 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
24113 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
24115 Date: Fri Jul 27 11:25:31 2007 +0200
24117 Add PPC4xx-HCU4 and HCU5 boards: READMEs
24121 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
24123 Date: Fri Jul 27 11:37:40 2007 +0200
24125 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
24127 This series of patches adds support for 2 boards from Netstal Maschinen.
24129 The HCU4 has a PPC405Gpr and
24130 the HCU5 has a PPC440EPX.
24132 The HCU4 has a somehow complicated flash setup, as the booteprom is
24133 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
24136 The HCU5 has only a booteprom as the whole code will be downloaded from a
24137 different board which has HD, CD-ROM, etc and where all code is stored.
24139 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
24144 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
24146 Date: Fri Aug 10 08:42:55 2007 +0200
24148 ppc4xx: Update lwmon5 POST configuration
24152 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
24154 Date: Fri Aug 10 08:25:22 2007 +0200
24156 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
24158 The patch adds support for UART POST on ppc44x-based boards with no
24159 external serial clocks installed.
24164 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
24166 Date: Mon Aug 6 18:18:34 2007 -0500
24168 mpc83xx: fix ITX[GP] O=builddir builds
24170 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
24172 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
24173 "BUILD_DIR=<some dir> ./MAKEALL ..."
24177 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
24179 Date: Wed Aug 1 15:00:59 2007 +0800
24181 mpc83xx: Correct the README for DDR ECC
24183 Update the README for DDR ECC, change the name
24184 to README.mpc83xx.ddrecc.
24189 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
24191 Date: Wed Aug 1 15:00:15 2007 +0800
24193 mpc83xx: Consolidate the ECC support of 83xx
24195 Remove the duplicated source code of ecc command on the <board>.c,
24196 for reused, move these code to cpu/mpc83xx directory.
24201 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
24203 Date: Sat Aug 4 13:37:39 2007 +0800
24205 mpc83xx: Correct the burst length for DDR2 with 32 bits
24207 The burst length should be 4 for DDR2 with 32 bits bus
24211 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
24213 Date: Wed Jul 25 19:25:33 2007 -0500
24215 mpc83xx: add support for the MPC8323E RDB
24217 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
24218 five 10/100 ethernet ports connected via an ICPlus IP175C
24219 switch, one PCI slot, and serial. Features not supported
24220 in this patch are SD card interface, 2 USB ports, and the
24226 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
24228 Date: Wed Jul 25 19:25:28 2007 -0500
24230 mpc83xx: fixup generic pci for libfdt
24232 add libfdt support to the generic 83xx pci code
24236 commit f57ac7a7b37109245b69db80839ebee26179966a
24238 Date: Wed Jul 25 19:25:22 2007 -0500
24240 mpc83xx: fix 8360 and cpu functions to update fdt being passed
24242 ..and not the global fdt. Rename local fdt vars to blob so as not to
24243 be confused with the global var with the same three-letter name.
24247 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
24249 Date: Wed Jul 4 21:34:24 2007 -0400
24251 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
24253 Several node strings were not correct (trailing slashes and properties
24255 Added setting of the timebase-frequency.
24256 Improved error messages and use debug() instead of printf().
24261 commit 26d02c9bbac1751c5e19294f000100b48d43a920
24263 Date: Wed Jul 4 21:27:30 2007 -0400
24265 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
24267 The new name matches more closely the kernel's name, which is also
24268 a much better description.
24270 These are the mpc83xx changes made necessary by the function name change.
24276 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
24278 Date: Mon Jun 25 10:41:56 2007 +0800
24280 mpc83xx: Add support for the display of reset status
24282 83xx processor family has many reset sources, such as
24283 power on reset, software hard reset, software soft reset,
24284 JTAG, bus monitor, software watchdog, check stop reset,
24285 external hard reset, external software reset.
24286 sometimes, to figure out the fault of system, we need to
24287 know the cause of reset early before the prompt of
24293 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
24295 Date: Mon Jun 25 10:41:04 2007 +0800
24297 mpc83xx: Fix the align bug of SDMA buffer
24299 According to the latest user manual, the SDMA temporary
24300 buffer base address must be 4KB aligned.
24305 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
24307 Date: Mon Jun 25 13:21:12 2007 +0800
24309 mpc83xx: Revise the MPC8360EMDS readme doc
24311 When the rev2.x silicon mount on the MPC8360EMDS baord,
24312 and if you are using the u-boot version after the commit
24313 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
24314 to make the ethernet interface usable, we have to setup
24315 the jumpers correctly.
24320 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
24322 Date: Tue Jul 3 13:46:32 2007 -0500
24324 FSL I2C driver programs the two I2C busses differently
24326 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
24327 The second I2C bus has its slave address programmed incorrectly and is
24328 missing a 5-us delay.
24333 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
24335 Date: Tue Jul 3 13:04:34 2007 -0500
24337 Update SCCR programming in cpu_init_f() to support all 83xx processors
24339 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
24340 bitfields for all 83xx processors. The code to update some bitfields was
24341 compiled only on some processors. Now, the bitfields are programmed as long
24342 as the corresponding CFG_SCCR option is defined in the board header file.
24343 This means that the board header file should not define any CFG_SCCR macros
24344 for bitfields that don't exist on that processor, otherwise the SCCR will be
24345 programmed incorrectly.
24350 commit 9546266999f0b9b51372636614211b88d90f0f25
24352 Date: Fri Jun 22 13:04:22 2007 +0200
24354 TQM834x: cleanup configuraton
24356 Remove irritating #undef DEBUG
24361 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
24363 Date: Mon Jun 18 09:09:53 2007 -0700
24365 MPC83xx: Fix makefile to generate config.h file in the build directory
24367 MPC83xx: Fix the Makefile config sections to generate the include/config.h
24368 file in the build directory instead of the source directory.
24373 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
24375 Date: Thu Jun 14 20:07:33 2007 -0500
24377 mpc83xx: Add support for 8360 silicon revision 2.1
24379 This change adds 8360 silicon revision 2.1 support to u-boot.
24384 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
24386 Date: Wed Aug 8 04:14:28 2007 -0500
24388 Treat ppc64 host as ppc
24392 commit 0dc4279b08ff82472bec2e2c90858602459febe8
24394 Date: Wed Aug 8 09:01:46 2007 +0800
24396 Minor fix for bios emulator makefile
24398 Add $(obj) to LIB avoiding objects be built in the source dir
24402 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
24404 Date: Wed Aug 8 08:33:11 2007 +0800
24406 Add CONFIG_BIOSEMU define to guard all the bios emulator code
24410 This patch fix the compile issue on the board that did not enable the bios emulator
24412 commit ed8106433522f2ea8933e9808346860d061d7731
24414 Date: Tue Jul 31 12:27:25 2007 -0500
24416 tsec: fix multiple PHY support
24418 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
24419 broke multiple PHY support in tsec.c. This fixes it.
24424 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
24426 Date: Thu Aug 9 09:08:18 2007 -0500
24428 tsec: Allow Ten Bit Interface address to be configurable
24430 Allow the address of the Ten Bit Interface (TBI) to be changed in the
24431 event of a conflict with another device.
24435 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
24437 Date: Wed Aug 8 09:54:26 2007 +0200
24439 Coding style cleanup
24443 commit a41de1f0d373e09c782dea558385a06247111ba5
24445 Date: Sun Aug 5 05:15:18 2007 -0500
24447 Port enabled for I2C signals and chipselects port configuration.
24451 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
24453 Date: Sun Aug 5 04:31:18 2007 -0500
24459 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
24461 Date: Sun Aug 5 04:11:20 2007 -0500
24467 commit 99c03c175d2689093176facf17c58ce2cb320001
24469 Date: Sun Aug 5 03:58:52 2007 -0500
24471 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
24475 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
24477 Date: Sun Aug 5 03:55:21 2007 -0500
24479 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
24483 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
24485 Date: Sun Aug 5 03:43:30 2007 -0500
24487 Moved sync() from board file to include/asm-m68k/io.h
24491 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
24493 Date: Sun Aug 5 03:30:44 2007 -0500
24495 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
24499 commit 9998bd37ead85e93953559720710d3b0685c81e6
24501 Date: Sun Aug 5 03:19:10 2007 -0500
24503 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
24507 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
24509 Date: Tue Aug 7 16:17:06 2007 +0800
24511 Add CONFIG_BIOSEMU define to guard all the bios emulator code
24513 This patch fix the compile issue on the board that did not enable the bios emulator
24515 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
24517 Date: Tue Aug 7 16:02:13 2007 +0200
24519 Fix missing brace error in fs/fat/fat.c
24520 [pointed out by Roderik Wildenburg]
24524 commit 706714d97a0d08d59eda4de2268c39f504688329
24526 Date: Mon Aug 6 23:41:53 2007 +0200
24528 [FIX] remove cute code
24530 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
24532 Date: Mon Aug 6 23:35:26 2007 +0200
24534 [FIX] Fix romfs code
24536 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
24538 Date: Mon Aug 6 23:31:49 2007 +0200
24540 [FIX] Coding style cleanup - Wolfgang's suggestions
24542 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
24544 Date: Mon Aug 6 23:21:05 2007 +0200
24546 Fixed typo in README (pointed out by Martin Jost).
24550 commit 537223afa61f64480df31ce440a9cb386df4a814
24552 Date: Mon Aug 6 21:10:17 2007 +0200
24554 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
24557 here an updated Bamboo README.
24561 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
24563 Date: Mon Aug 6 02:17:36 2007 +0200
24565 Coding style cleanup. Update CHANGELOG.
24569 commit 221838cc7eb178370ff62aa05920a582e12ac322
24571 Date: Tue Jul 10 09:03:22 2007 +0800
24573 Remove the bios emulator from MAI board.
24575 The bios emulator in the MAI board can not pass compile
24576 and have a lot of crap in it. remove it and will have a
24577 clean and small bios emulator in the drivers directory
24578 which can be uesed for every board.
24582 commit 5618332409bb96f4448d1712899369fc80c0b489
24584 Date: Fri Jul 13 12:14:59 2007 +0800
24586 Fix some compile issues for MAI board.
24590 commit 0f460a1ee148b648ee242c3157650287d4296260
24592 Date: Fri Jul 13 12:14:58 2007 +0800
24594 Configurations for ATI video card BIOS emulator
24596 This patch add definition of the BIOS emulator and the ATI framebuffer
24597 driver for MPC8641HPCN board.
24602 commit ece92f85053b8df613edcf05b26a416cbc3d629c
24604 Date: Fri Jul 6 08:34:56 2007 +0800
24606 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
24607 ATI video card BIOS. and can be used for x86 code emulation by some
24612 commit 5072188acabde3178fac7f5a597150e6e74fd40c
24614 Date: Fri Jul 6 08:33:33 2007 +0800
24616 This is a framebuffer driver for ATI video card, can work for PCI9200,
24617 X300, X700, X800 ATI video cards.
24622 commit 5728be389e65fd47f34b33c2596271eb4db751ae
24624 Date: Mon Aug 6 01:01:49 2007 +0200
24626 Coding style cleanup. Update CHANGELOG.
24630 commit 8092fef4c29b395958bb649647da7e3775731517
24632 Date: Tue Dec 12 14:26:01 2006 +0100
24634 Add functions to list of exported functions
24636 Additionally export the following fuctions (to make trab_config build again):
24640 Also bump the ABI version to reflect this change
24644 commit 63cec5814fab5d2b1c86982327433807a5ac0249
24646 Date: Thu Aug 2 14:09:49 2007 -0500
24648 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
24650 All of the PCI/PCI-Express driver and initialization code that
24651 was in the MPC8641HPCN port has now been moved into the common
24652 drivers/fsl_pci_init.c. In a subsequent patch, this will be
24653 utilized by the 85xx ports as well.
24655 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
24657 Also enable the second PCI-Express controller on 8641
24658 by getting its BATS and CFG_ setup right.
24660 Fixed a u16 vendor compiler warning in AHCI driver too.
24666 commit a274ca4f6d68830e7c916f897561cff8c4101c38
24668 Date: Sun Aug 5 22:33:05 2007 +0200
24670 [FIX] Coding style cleanup
24672 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
24674 Date: Sun Aug 5 16:13:31 2007 +0200
24676 [FIX] Xilinx Uartlite driver
24677 Because PPC405 can use UARTLITE serial interface and
24678 Microblaze can use Uart16550 serial interface not only Uartlite.
24680 commit 98889edd50aadf862071eb5664747ad0d568a20e
24682 Date: Sun Aug 5 15:54:53 2007 +0200
24684 [FIX] Change configuration for XUPV2P Microblaze board
24686 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
24688 Date: Sun Aug 5 15:53:50 2007 +0200
24690 [PATCH] Added support for Xilinx Emac community driver
24692 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
24694 Date: Fri Aug 3 12:08:16 2007 +0200
24696 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
24698 Add the ability for modules from the Schindler cm5200 family to use a
24699 single U-Boot image:
24700 - rename cm1_qp1 to cm5200
24701 - add run-time module detection
24702 - parametrize SDRAM configuration according to the module we are running on
24704 Few minor, board-specific fixes included in this patch:
24705 - better MAC address handling
24706 - updated default environment ('update' command uses +{filesize} now)
24707 - improved error messages in the auto-update code
24708 - allow booting U-Boot from RAM (CFG_RAMBOOT)
24714 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
24716 Date: Fri Aug 3 04:05:25 2007 -0500
24718 Add Marvell 1149 PHY support to the TSEC
24720 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
24722 Date: Thu Aug 2 21:27:46 2007 +0200
24724 Coding style cleanup, update CHANGELOG
24728 commit 63e22764d2f8653f68888c667eb65b3996b52680
24730 Date: Thu Aug 2 10:11:18 2007 +0200
24732 Minor cleanup of <board>_nand build rules.
24734 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
24736 Date: Thu Aug 2 08:33:56 2007 +0200
24738 ppc4xx: Code cleanup
24742 commit c92409812206ac67a7fa7aae298539a9c3804a46
24744 Date: Tue Jul 31 18:51:48 2007 +0200
24746 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
24748 During config transactions on the PCIe bus an attempt to scan for a
24749 non-existent device can lead to a machine check exception with certain
24750 peripheral devices. In order to avoid crashing in such scenarios the
24751 instrumented versions of the config cycle read routines are introduced, so
24752 the exceptions fixups framework can gracefully recover.
24757 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
24759 Date: Tue Jul 31 18:19:54 2007 +0200
24761 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
24763 This brings back separate settings for PCIe bus numbers depending on chip
24764 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
24765 commit. 440SPe rev. A does NOT work properly with the same settings as for
24766 the rev. B (no devices are seen on the bus during enumeration).
24770 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
24772 Date: Thu Aug 2 00:48:45 2007 +0200
24774 Fix build errors and warnings / code cleanup.
24778 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
24780 Date: Tue Jul 31 10:24:56 2007 +0200
24782 ppc4xx: Update AMCC Bamboo 440EP support
24784 Changed storage type of cfg_simulate_spd_eeprom to const
24785 Changed storage type of gpio_tab to stack storage
24786 (Cannot access global data declarations in .bss until afer code relocation)
24788 Improved SDRAM tests to catch problems where data is not uniquely addressable
24789 (e.g. incorrectly programmed SDRAM row or columns)
24791 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
24792 Fixed AM29LV320DT (OpCode Flash) sector map
24797 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
24799 Date: Tue Jul 31 08:37:01 2007 +0200
24801 ppc4xx: Update 440EPx lwmon5 board support
24803 - Clear ECC status regs after ECC POST test
24804 - Set dcbz for ECC generation with caches enabled as default
24809 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
24811 Date: Mon Jul 30 11:04:57 2007 +0200
24813 ppc4xx: Only print ECC related info when the error bis are set
24817 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
24819 Date: Fri Jul 27 16:44:31 2007 +0200
24821 new FPGA image for PLU405 board
24823 new FPGA image for PLU405 board with improved CompactFlash timing
24827 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
24829 Date: Fri Jul 27 14:43:59 2007 +0200
24831 [ADS5121] Support for the ADS5121 board
24833 The following MPC5121e subsystems are supported:
24835 - low-level CPU init
24836 - NOR Boot Flash (common CFI driver)
24846 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
24848 Date: Fri Jul 27 14:22:04 2007 +0200
24850 [PPC] Remove unused MSR_USER definition
24854 commit d4024bb72dd81695ec099b2199eda0d27c623e62
24856 Date: Thu Jul 26 17:49:11 2007 +0200
24858 ppc4xx: Add support for AMCC 405EP Taihu board
24862 commit b66091de6c7390620312c2501db23d8391e7cabb
24864 Date: Thu Jul 26 15:08:01 2007 +0200
24866 ppc4xx: lwmon5: Update Lime initialization
24868 Change Lime SDRAM initialization to now support 100MHz and
24869 133MHz (if enabled). Also the framebuffer is initialized to
24870 display a blue rectangle with a white border.
24875 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
24877 Date: Tue Jul 24 09:52:52 2007 +0200
24879 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
24881 The used Intel NOR FLASH chips have internally two dies, and are now
24882 treated as two seperate chips.
24886 commit aedf5bde179ecfbd0a96130d18996a96518b785f
24888 Date: Tue Jul 24 07:20:09 2007 +0200
24890 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
24892 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
24893 interrupt controller.
24897 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
24899 Date: Fri Jul 20 15:03:44 2007 +0200
24901 ppc4xx: Fix bug with default GPIO output value
24903 As spotted by Matthias Fuchs, the default output values for all GPIO1
24904 outputs were not setup correctly. This patch fixes this issue.
24908 commit 531e3e8b831f357056448fa573137d5fb37000fd
24910 Date: Fri Jul 20 15:03:03 2007 +0200
24912 POST: Add ECC POST for the lwmon5 board
24914 This patch adds ECC Post test for the Lwmon5 board based
24915 on PPC440EPx to U-Boot.
24921 commit cc3023b9f95d7ac959a764471a65001062aecf41
24923 Date: Thu Jul 19 17:12:28 2007 +0200
24925 Fix breakage of 8xx boards from recent commit.
24927 This patch fixes the negative consequences for 8xx of the recent
24928 "ppc4xx: Clean up 440 exceptions handling" commit.
24932 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
24934 Date: Mon Jul 16 13:11:12 2007 +0200
24936 Coding style cleanup
24940 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
24942 Date: Mon Jul 16 10:02:12 2007 +0200
24944 ppc4xx: Code cleanup
24948 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
24950 Date: Mon Jul 16 10:01:38 2007 +0200
24952 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
24956 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
24958 Date: Mon Jul 16 10:00:43 2007 +0200
24960 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
24962 The new boardspecific DDR2 controller configuration is used for the Yucca
24963 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
24967 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
24969 Date: Mon Jul 16 09:57:00 2007 +0200
24971 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
24973 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
24974 support non default, boardspecific DDR(2) controller configuration.
24978 commit 5743a9207a370b90f09b20ebd61167c806b937f3
24980 Date: Mon Jul 16 08:53:51 2007 +0200
24982 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
24984 The new function remove_tlb() can be used to remove the TLB's used to
24985 map a specific memory region. This is especially useful for the DDR(2)
24986 setup routines which configure the SDRAM area temporarily as a cached
24987 area (for speedup on auto-calibration and ECC generation) and later
24988 need this area uncached for normal usage.
24992 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
24994 Date: Mon Jul 16 00:31:07 2007 +0200
24996 [PATCH] Support for Xilinx EmacLite controller
24998 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
25000 Date: Sat Jul 14 22:51:02 2007 +0200
25006 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
25008 Date: Sat Jul 14 13:11:28 2007 +0200
25010 [FIX] support for simply measuring time
25012 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
25014 Date: Sat Jul 14 12:41:23 2007 +0200
25016 [FS] Added support for ROMFS
25018 commit 011595307731a7a67a7445d107c279d031e8ab97
25020 Date: Sat Jul 14 01:06:58 2007 +0200
25022 [PCS440EP] - fix compile error, if BUILD_DIR is used
25024 commit 5a2f1098d81ad58b309e5e558d0492643166a799
25026 Date: Sat Jul 14 00:18:48 2007 +0200
25028 [PATCH] Support time without timer
25030 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
25032 Date: Fri Jul 13 21:43:55 2007 +0200
25034 [PATCH] Remove problem with disabled BARREL SHIFTER
25036 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
25038 Date: Fri Jul 13 21:41:44 2007 +0200
25040 [FIX] correct help for rspr
25042 commit fad63407154f46246ce80d53a9c669a44362ac67
25044 Date: Fri Jul 13 09:54:17 2007 +0200
25046 make show_boot_progress () weak.
25050 commit 907902472391b6ca1876ec300687562ecaf459b1
25052 Date: Fri Jul 13 08:26:05 2007 +0200
25054 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
25055 - fix compile error, if BUILD_DIR is used
25059 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
25061 Date: Thu Jul 12 16:32:08 2007 +0200
25063 ppc4xx: Change receive buffer handling in the 4xx emac driver
25065 This change fixes a bug in the receive buffer handling, that
25066 could lead to problems upon high network traffic (broadcasts...).
25070 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
25072 Date: Thu Jul 12 01:45:34 2007 +0200
25074 Update CHANGELOG, minor coding style cleanup.
25078 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
25080 Date: Fri Jun 8 16:41:18 2007 -0500
25082 Remove erroneous errata code from Marvel 88E1111S driver
25084 The Marvel 88E1111S driver for the TSEC was copied from the
25085 88E1101 driver, and included a fix for an erratum which does not
25086 exist on that part. Now it is removed
25090 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
25092 Date: Tue Jun 5 16:38:44 2007 -0500
25096 adds the reset register to 85xx immap
25101 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
25103 Date: Thu May 10 17:50:01 2007 -0500
25105 Polished the 85xx ADS config files
25107 Made the boot commands use device trees by default.
25108 Also moved the ramdisk to 1000000 (I think the previous address
25109 was getting overridden during boot).
25113 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
25115 Date: Wed May 9 11:03:32 2007 -0500
25117 8544ds: Fix Makefile after moving pixis to board/freescale.
25119 The OBJTREE != SRCTREE build scenario was broken.
25125 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
25127 Date: Wed May 9 00:54:20 2007 -0500
25129 tsec: Fix PHY code to match first driver
25131 Jarrold Wen noticed that the generic PHY code always matches
25132 under the current implementation. Change it so the first match
25133 wins, and *only* unknown PHYs trigger the generic driver
25137 commit ccc091aac61a38cd998d575d92f7232e256d6312
25139 Date: Tue May 8 17:27:43 2007 -0500
25141 Add support for CPM device tree configuration to 8560 ADS
25143 * Adds code to modify CPM frequencies
25144 * Cleans up the config file to #define TSEC and (for now) #undef FCC
25145 * Adds the MII command for all 8560 ADS configurations
25146 * Updates config file to provide convenience commands for booting
25152 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
25154 Date: Tue May 8 17:23:02 2007 -0500
25156 Fix Marvell 88e1145 PHY init code
25158 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
25159 where the reset was being done after the errata code instead of
25165 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
25167 Date: Wed Jul 11 14:52:16 2007 -0500
25169 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
25173 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
25175 Date: Wed Jul 11 14:52:08 2007 -0500
25177 pciauto setup bridge
25179 The P2P bridge bus numbers programmed into the device are relative to
25184 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
25186 Date: Wed Jul 11 14:52:01 2007 -0500
25188 Support PCIe extended config registers
25190 FSL PCIe block has extended cfg registers in the 100 and 400 range.
25191 For example, to read the LTSSM register: pci display <busn>.0 404 1
25195 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
25197 Date: Wed Jul 11 14:51:48 2007 -0500
25199 Minor improvements to drivers/pci_auto.c
25201 - Make pciauto_{pre,post}scan_setup_bridge non-static
25202 - Added physical address display in debug messages.
25206 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
25208 Date: Wed Jul 11 14:51:35 2007 -0500
25210 Start pci hose scan from hose->current_busno.
25212 Ensure hose->current_busno is not less than first_busno. This fixes
25213 broken board code which leaves current_busno=0 when first_busno is
25214 greater than 0 for the cases with multiple controllers.
25218 commit 3865b1fb7843a08ad49a6319a36415752276ff48
25220 Date: Wed Jul 11 12:13:53 2007 +0200
25222 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
25226 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
25228 Date: Wed Jul 11 20:11:07 2007 +0200
25230 CM1.QP1: Support for the Schindler CM1.QP1 board.
25235 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
25237 Date: Wed Jul 11 18:39:11 2007 +0200
25239 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
25240 - now the Flash ST M29W040B is supported (not tested)
25241 - fix the "led" command
25242 - fix compile error, if BUILD_DIR is used
25246 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
25248 Date: Sun Jul 8 13:44:27 2007 +0200
25250 Fix malloc problem introduced with the relocation fixup for the PPC platform
25252 The relocation fixup didn't handle the malloc pointer initialization
25253 correctly. This patch fixes this problem. Tested successfully on 4xx.
25254 The relocation fixup patches for 4xx will follow soon.
25258 commit 0dca874db62718e41253659e60f3a1de7eb418ce
25259 Author: TsiChung <tcliew@Goku.(none)>
25260 Date: Tue Jul 10 15:45:43 2007 -0500
25262 Cache update and added CFG_UNIFY_CACHE
25264 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
25266 Signed-off-by: TsiChung <tcliew@Goku.(none)>
25268 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
25270 Date: Thu Jul 5 23:36:16 2007 -0500
25272 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
25274 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
25278 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
25280 Date: Thu Jul 5 23:31:25 2007 -0500
25282 Update header files
25284 Include immap.h and renamed mcfrtc.h to rtc.h
25288 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
25290 Date: Thu Jul 5 23:29:21 2007 -0500
25292 Add mcffec_initialize()
25294 Added mcffec_initialize() in eth_initialize()
25298 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
25300 Date: Thu Jul 5 23:27:40 2007 -0500
25302 Update header file and clean up
25308 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
25310 Date: Thu Jul 5 23:23:15 2007 -0500
25312 New uart structure and defines
25314 Seperated from mcfuart.h
25318 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
25320 Date: Thu Jul 5 23:22:31 2007 -0500
25322 New timer structure and defines
25324 Seperated from mcftimer.h
25328 commit e04acb2eba4782489417240eff76e20e176aec10
25330 Date: Thu Jul 5 23:21:09 2007 -0500
25332 Rename mcfrtc to rtc
25334 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
25338 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
25340 Date: Thu Jul 5 23:17:36 2007 -0500
25342 Rename mcfserial.c. Update include header
25344 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
25348 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
25350 Date: Thu Jul 5 23:13:58 2007 -0500
25352 Header file update, clean up and cache handling
25354 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
25358 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
25360 Date: Thu Jul 5 23:10:40 2007 -0500
25362 Create interrupts.c and modify Makefile
25364 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
25368 commit ddd104f1ed655eda50c06ba636237a83ed943f34
25370 Date: Thu Jul 5 23:06:55 2007 -0500
25376 commit b9bf3de377b2bae70c983c9b97feae914999e735
25378 Date: Thu Jul 5 23:05:31 2007 -0500
25380 Update header file and some clean up
25382 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
25386 commit 84a015b52ec820a5ae173717d78516de731c89c2
25388 Date: Thu Jul 5 23:03:28 2007 -0500
25390 Update header file and enable icache
25392 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
25396 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
25398 Date: Thu Jul 5 23:01:22 2007 -0500
25400 Update header file and removed interrupt_init()
25402 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
25406 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
25408 Date: Thu Jul 5 22:57:46 2007 -0500
25410 Update for flash.o and mii.o
25412 Removed flash.o and added mii.o
25416 commit c5ded275d839e4ff79f41718d50a835d989f57bc
25418 Date: Thu Jul 5 22:56:19 2007 -0500
25420 MII functions calls.
25424 commit 427c814104560e29bda14955c67703245aaaa5b4
25426 Date: Thu Jul 5 22:54:42 2007 -0500
25428 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
25430 The removed MII routines will be placed in mii.c.
25434 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
25436 Date: Thu Jul 5 22:51:05 2007 -0500
25440 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
25444 commit 2744354a8437b8f78db178e30660215688bff570
25446 Date: Thu Jul 5 22:46:38 2007 -0500
25448 Seperate old structure defines and new structure defines
25450 Removed new uart structure and defines to uart.h
25454 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
25456 Date: Thu Jul 5 22:45:01 2007 -0500
25458 Seperate old structure defines and new structure defines
25460 New timer structure and defines will move to new timer.h
25464 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
25466 Date: Thu Jul 5 22:42:23 2007 -0500
25474 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
25476 Date: Thu Jul 5 22:41:24 2007 -0500
25480 Replaced whitespace with tabs
25484 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
25486 Date: Thu Jul 5 22:39:07 2007 -0500
25488 Create new header file and move peripherals base address from configs file to new header file.
25490 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
25494 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
25496 Date: Thu Jul 5 22:24:58 2007 -0500
25500 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
25504 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
25506 Date: Tue Jul 10 11:19:50 2007 -0500
25508 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
25510 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25511 Those always evaluated TRUE, and thus were always compiled
25512 even when IDE really wasn't defined/wanted.
25516 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
25518 Date: Tue Jul 10 11:13:21 2007 -0500
25520 drivers/: Remove lingering references to CFG_CMD_* symbols.
25522 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25523 Those always evaluated TRUE, and thus were always compiled
25524 even when IDE really wasn't defined/wanted.
25528 commit f40a7f3e3888b42a43674b099e5470022c8c544c
25530 Date: Tue Jul 10 11:07:56 2007 -0500
25532 fs/: Remove lingering references to CFG_CMD_* symbols.
25534 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25535 Those always evaluated TRUE, and thus were always compiled
25536 even when IDE really wasn't defined/wanted.
25540 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
25542 Date: Tue Jul 10 11:05:02 2007 -0500
25544 net/: Remove lingering references to CFG_CMD_* symbols.
25546 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25547 Those always evaluated TRUE, and thus were always compiled
25548 even when IDE really wasn't defined/wanted.
25552 commit 902531788376046da212afd1661cffb62f3daa1c
25554 Date: Tue Jul 10 11:02:44 2007 -0500
25556 common/: Remove lingering references to CFG_CMD_* symbols.
25558 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25559 Those always evaluated TRUE, and thus were always compiled
25560 even when IDE really wasn't defined/wanted.
25564 commit d39b57415838c73fb0a37eca84de3c68ba990586
25566 Date: Tue Jul 10 10:48:22 2007 -0500
25568 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
25570 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25571 Those always evaluated TRUE, and thus were always compiled
25572 even when IDE really wasn't defined/wanted.
25576 commit 77a318545d57aefa844752465b94c7e09a3f26d0
25578 Date: Tue Jul 10 10:39:10 2007 -0500
25580 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
25582 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25583 Those always evaluated TRUE, and thus were always compiled
25584 even when IDE really wasn't defined/wanted.
25588 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
25590 Date: Tue Jul 10 10:27:39 2007 -0500
25592 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
25596 commit 079a136c3588814784561d6e4856970ee82d6e2a
25598 Date: Tue Jul 10 10:12:10 2007 -0500
25600 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
25602 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25603 used to be included but CONFIG_BOOTP_MASK was not defined.
25605 Remove lingering references to CFG_CMD_* symbols.
25609 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
25611 Date: Tue Jul 10 09:38:02 2007 -0500
25613 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
25615 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25616 used to be included but CONFIG_BOOTP_MASK was not defined.
25618 Remove lingering references to CFG_CMD_* symbols.
25622 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
25624 Date: Tue Jul 10 09:29:01 2007 -0500
25626 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
25628 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25629 used to be included but CONFIG_BOOTP_MASK was not defined.
25631 Remove lingering references to CFG_CMD_* symbols.
25635 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
25637 Date: Tue Jul 10 09:22:23 2007 -0500
25639 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
25641 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25642 used to be included but CONFIG_BOOTP_MASK was not defined.
25644 Remove lingering references to CFG_CMD_* symbols.
25648 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
25650 Date: Tue Jul 10 09:10:49 2007 -0500
25652 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
25654 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25655 used to be included but CONFIG_BOOTP_MASK was not defined.
25657 Remove lingering references to CFG_CMD_* symbols.
25661 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
25663 Date: Tue Jul 10 09:02:57 2007 -0500
25665 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
25667 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25668 used to be included but CONFIG_BOOTP_MASK was not defined.
25670 Remove lingering references to CFG_CMD_* symbols.
25674 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
25676 Date: Mon Jul 9 22:08:34 2007 -0500
25678 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
25680 All of the choices for CONFIG_BOOTP_ are now documented in
25681 the README file. You must now individually select exactly
25682 the set that you want using a series of
25683 #define CONFIG_BOOTP_<x>
25684 statements in the board port config files now.
25688 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
25690 Date: Mon Jul 9 21:57:31 2007 -0500
25692 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25696 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
25698 Date: Mon Jul 9 21:48:26 2007 -0500
25700 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25704 commit 37d4bb70586659dedef1658ce1bed071be098aec
25706 Date: Mon Jul 9 21:38:02 2007 -0500
25708 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25712 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
25714 Date: Mon Jul 9 21:31:24 2007 -0500
25716 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25720 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
25722 Date: Mon Jul 9 21:24:19 2007 -0500
25724 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25728 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
25730 Date: Mon Jul 9 21:16:53 2007 -0500
25732 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25736 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
25738 Date: Mon Jul 9 19:12:30 2007 -0500
25740 Retire CONFIG_COMMANDS finally.
25741 Strip old CFG_CMD_* symbols out.
25745 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
25747 Date: Mon Jul 9 19:10:03 2007 -0500
25749 Update README.* to reference new CONFIG_CMD_* names now.
25753 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
25755 Date: Mon Jul 9 19:06:00 2007 -0500
25757 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
25761 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
25763 Date: Mon Jul 9 18:57:22 2007 -0500
25765 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
25769 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
25771 Date: Mon Jul 9 18:45:16 2007 -0500
25773 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
25777 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
25779 Date: Mon Jul 9 18:38:39 2007 -0500
25781 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
25785 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
25787 Date: Mon Jul 9 18:31:28 2007 -0500
25789 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
25793 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
25795 Date: Mon Jul 9 18:24:55 2007 -0500
25797 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
25801 commit fcec2eb93e126400009729328e797f12bc94f1fd
25803 Date: Mon Jul 9 18:19:09 2007 -0500
25805 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
25809 commit a593814f2be0c9cdc3133cd550b167b8a988328f
25811 Date: Mon Jul 9 18:10:50 2007 -0500
25813 rtc/: Remove obsolete references to CONFIG_COMMANDS
25817 commit 67350568f9d46e66c21829f3513b3db0caeb948b
25819 Date: Mon Jul 9 18:05:38 2007 -0500
25821 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
25825 commit 7def6b34f910f08d7ef0a14646da067719237ca2
25827 Date: Mon Jul 9 18:02:11 2007 -0500
25829 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
25833 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
25835 Date: Mon Jul 9 17:56:50 2007 -0500
25837 fs/: Remove obsolete references to CONFIG_COMMANDS
25841 commit c91898bbc505aff3e12a807af88e76da18efb7ee
25843 Date: Mon Jul 9 17:46:09 2007 -0500
25845 tools/: Remove obsolete references to CONFIG_COMMANDS
25849 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
25851 Date: Mon Jul 9 17:45:14 2007 -0500
25853 net/: Remove obsolete references to CONFIG_COMMANDS
25857 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
25859 Date: Mon Jul 9 17:39:42 2007 -0500
25861 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
25865 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
25867 Date: Mon Jul 9 17:30:01 2007 -0500
25869 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
25873 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
25875 Date: Mon Jul 9 17:22:37 2007 -0500
25877 disk/: Remove obsolete references to CONFIG_COMMANDS
25881 commit 639221c76c88215bd55af83ad174fc30d1940f8f
25883 Date: Mon Jul 9 17:15:49 2007 -0500
25885 include/: Remove obsolete references to CONFIG_COMMANDS
25886 Mostly removed from comments here.
25890 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
25892 Date: Tue Jul 10 00:01:28 2007 +0200
25894 Coding style cleanup; update CHANGELOG.
25898 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
25900 Date: Mon Jul 9 11:00:24 2007 +0200
25902 Small coding style cleanup
25906 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
25908 Date: Mon Jul 9 10:10:08 2007 +0200
25910 Migrate esd 405EP boards to new NAND subsystem
25912 Remove unused CFG_NAND_LEGACY define
25914 These boards to not have NAND.
25918 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
25920 Date: Mon Jul 9 10:10:06 2007 +0200
25922 Migrate esd 405EP boards to new NAND subsystem
25924 Migrate esd 405EP boards to new NAND subsystem
25927 -use correct io accessors (in/out_be32())
25931 commit e09f7ab5749c345f924da272bea0521a73af5b11
25933 Date: Mon Jul 9 10:10:04 2007 +0200
25935 Migrate esd 405EP boards to new NAND subsystem
25937 This patch prepares the migration from the legacy NAND driver
25938 to U-Boot's new NAND subsystem for esd boards.
25942 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
25944 Date: Sun Jul 8 18:10:08 2007 -0500
25946 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
25950 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
25952 Date: Sun Jul 8 18:05:39 2007 -0500
25954 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
25958 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
25960 Date: Sun Jul 8 18:02:23 2007 -0500
25962 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
25966 commit baa26db4113679b80970ff447d91cc10217742a6
25968 Date: Sun Jul 8 17:51:39 2007 -0500
25970 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
25974 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
25976 Date: Sun Jul 8 17:02:01 2007 -0500
25978 Clear up confusion over the CMD_POST and POST_DIAG mess.
25980 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
25981 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
25982 Clear this mess up some.
25986 commit b3631487105a57ab7cbadfc26efbaf9676275018
25988 Date: Sun Jul 8 15:45:08 2007 -0500
25990 Remove references to the old cmd_confdefs.h include file.
25994 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
25996 Date: Sun Jul 8 15:42:59 2007 -0500
25998 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
26000 Use new CONFIG_CMD_* in lwmon5.h board config file.
26001 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
26005 commit a5562901661bd428f7e5feb333f796372cb81019
26007 Date: Sun Jul 8 15:31:57 2007 -0500
26009 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
26013 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
26015 Date: Sun Jul 8 15:02:44 2007 -0500
26017 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
26021 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
26023 Date: Sun Jul 8 15:12:40 2007 -0500
26025 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
26029 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
26031 Date: Sun Jul 8 14:55:07 2007 -0500
26033 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
26037 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
26039 Date: Sun Jul 8 14:49:44 2007 -0500
26041 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
26045 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
26047 Date: Sun Jul 8 14:21:43 2007 -0500
26049 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
26053 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
26055 Date: Sun Jul 8 14:14:17 2007 -0500
26057 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
26061 commit 348f258f24253433e4a2302a0bbceb6740a67246
26063 Date: Sun Jul 8 13:46:18 2007 -0500
26065 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
26069 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
26071 Date: Sun Jul 8 10:09:35 2007 -0500
26073 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
26077 commit 60a0876b5106b34220e459c208bbf648073306c0
26079 Date: Sat Jul 7 21:04:26 2007 -0500
26081 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
26085 commit dcaa71562826a2466e894c868d132509dcda8444
26087 Date: Sat Jul 7 20:56:05 2007 -0500
26089 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
26093 commit 3c3227f3c737502311b25b72084573901cbbf17d
26095 Date: Sat Jul 7 20:40:43 2007 -0500
26097 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
26101 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
26103 Date: Thu Jul 5 19:52:35 2007 -0500
26105 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
26109 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
26111 Date: Thu Jul 5 19:32:07 2007 -0500
26113 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
26117 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
26119 Date: Thu Jul 5 19:13:52 2007 -0500
26121 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
26123 Since ADS860.h includes "board/fads/fads.h" with ramifications
26124 on the CONFIG_COMMAND treatment, it too has to be adjusted to
26125 exclude already configured commands in this same commit.
26129 commit 10e038932f22ee80ebd53de312531e70e6590a2f
26131 Date: Fri Jul 6 14:58:39 2007 +0200
26133 [NAND] Bad block skipping for command nboot
26135 The old implementation of command nboot does not support reading the image from
26136 NAND flash with skipping of bad blocks. The patch implements a new version of
26137 the nboot command: by calling nboot.jffs2 from the u-boot command line the
26138 command will load the image from NAND flash with respect to bad blocks (by using
26139 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
26145 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
26147 Date: Fri Jul 6 12:26:51 2007 +0200
26149 ppc4xx: Update lwmon5 default environment
26153 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
26155 Date: Fri Jul 6 11:48:24 2007 +0200
26157 ppc4xx: Update lwmon5 board
26159 Add unlock=yes environment variable to default variables to unlock
26160 the CFI flash by default.
26164 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
26166 Date: Fri Jul 6 09:45:47 2007 +0200
26168 Fix problem with get/setdcr commands introduced by cfg patches
26172 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
26174 Date: Fri Jul 6 02:50:19 2007 +0200
26176 Code cleanup and default config update for STC GP3 SSA board.
26180 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
26182 Date: Thu Jul 5 17:56:27 2007 +0200
26184 Fixing some typos etc. introduced mainly by cfg patches.
26188 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
26190 Date: Thu Jul 5 11:12:16 2007 +0200
26192 Minor coding style cleanup. Update CHANGELOG.
26194 commit dca3b3d6d6396b67e5e84af53452164923c73443
26196 Date: Wed Jul 4 22:33:46 2007 -0500
26198 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
26202 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
26204 Date: Wed Jul 4 22:33:38 2007 -0500
26206 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
26210 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
26212 Date: Wed Jul 4 22:33:30 2007 -0500
26214 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
26218 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
26220 Date: Wed Jul 4 22:33:23 2007 -0500
26222 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
26226 commit 26a34560d56a9df5bc2ae23525d9229736134757
26228 Date: Wed Jul 4 22:33:17 2007 -0500
26230 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
26234 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
26236 Date: Wed Jul 4 22:33:13 2007 -0500
26238 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
26242 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
26244 Date: Wed Jul 4 22:33:07 2007 -0500
26246 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
26250 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
26252 Date: Wed Jul 4 22:33:01 2007 -0500
26254 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
26258 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
26260 Date: Wed Jul 4 22:32:57 2007 -0500
26262 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
26266 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
26268 Date: Wed Jul 4 22:32:51 2007 -0500
26270 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
26274 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
26276 Date: Wed Jul 4 22:32:32 2007 -0500
26278 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
26282 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
26284 Date: Wed Jul 4 22:32:25 2007 -0500
26286 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
26290 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
26292 Date: Wed Jul 4 22:32:19 2007 -0500
26294 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
26298 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
26300 Date: Wed Jul 4 22:32:10 2007 -0500
26302 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
26306 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
26308 Date: Wed Jul 4 22:32:03 2007 -0500
26310 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
26314 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
26316 Date: Wed Jul 4 22:31:56 2007 -0500
26318 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
26322 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
26324 Date: Wed Jul 4 22:31:49 2007 -0500
26326 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
26330 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
26332 Date: Wed Jul 4 22:31:42 2007 -0500
26334 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
26338 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
26340 Date: Wed Jul 4 22:31:35 2007 -0500
26342 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
26346 commit d794cfefead5fc177cf4f41164e80382e9c9484a
26348 Date: Wed Jul 4 22:31:15 2007 -0500
26350 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
26354 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
26356 Date: Wed Jul 4 22:31:07 2007 -0500
26358 include/configs: Use new CONFIG_CMD_* in STx board config files.
26362 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
26364 Date: Wed Jul 4 22:30:58 2007 -0500
26366 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
26370 commit 2694690e285acaa34922f55f4b5ae030da60c55a
26372 Date: Wed Jul 4 22:30:50 2007 -0500
26374 include/configs: Use new CONFIG_CMD_* in TQM board config files.
26378 commit 1cc4c458329765b58e584a19821e796b3c10e976
26380 Date: Wed Jul 4 22:30:28 2007 -0500
26382 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
26386 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
26388 Date: Wed Jul 4 22:30:06 2007 -0500
26390 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
26394 commit b44896215a09c60fa40cae906f7ed207bbc2c492
26396 Date: Thu Jul 5 08:17:37 2007 +0200
26398 Merged POST framework with the current TOT.
26402 commit b24629fa377214d63bb40d1360e354b6d3e4af56
26404 Date: Wed Jun 13 13:23:15 2007 -0500
26406 mpc86xx: Remove old CFG_CMD_* references.
26410 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
26412 Date: Wed Jun 13 13:22:54 2007 -0500
26414 Add MPC8568MDS to MAKEALL 85xx target.
26416 It was missing from the original port submission.
26420 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
26422 Date: Wed Jun 13 13:22:08 2007 -0500
26424 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
26428 commit 56b304ac2091689506088a9ae67f63fd6300cf16
26430 Date: Wed Jun 13 13:21:37 2007 -0500
26432 Fix #if typo in CONFIG_CMD_* changes.
26436 commit f780b83316d9af1f61d71cc88b1917b387b9b995
26438 Date: Wed Jun 27 18:11:38 2007 +0200
26440 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
26444 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
26446 Date: Wed Jul 4 10:06:30 2007 +0200
26448 ppc4xx: Update lwmon5 board
26450 - Add optional ECC generation routine to preserve existing
26451 RAM values. This is needed for the Linux log-buffer support
26452 - Add optional DDR2 setup with CL=4
26453 - GPIO50 not used anymore
26454 - Lime register setup added
26458 commit 6810a34677dbc446334f5e451f1682426dd33b49
26460 Date: Tue Jul 3 00:17:28 2007 -0600
26462 Fix Makefile to use $(MKCONFIG) macro for all board ports
26466 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
26468 Date: Tue Jul 3 00:17:28 2007 -0600
26470 Fix Makefile to use $(MKCONFIG) macro for all board ports
26474 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
26476 Date: Tue Jul 3 00:34:49 2007 -0600
26478 Correct fixup relocation for mpc83xx
26482 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
26484 Date: Tue Jul 3 00:34:44 2007 -0600
26486 Correct fixup relocation for mpc8260
26490 commit f3a52fe05923935db86985daf9438e2f70ac39aa
26492 Date: Tue Jul 3 00:34:39 2007 -0600
26494 Correct fixup relocation for mpc824x
26498 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
26500 Date: Tue Jul 3 00:34:34 2007 -0600
26502 Correct fixup relocation for mpc8220
26506 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
26508 Date: Tue Jul 3 00:34:29 2007 -0600
26510 Correct fixup relocation for MPC5xxx
26514 commit 3649cd99ba815b6601868735765602f00ef3692b
26516 Date: Tue Jul 3 00:34:24 2007 -0600
26518 Correct relocation fixup for mpc5xx
26522 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
26524 Date: Tue Jul 3 00:34:19 2007 -0600
26526 Don't set gd->reloc_off if relocation of .fixup works correctly
26530 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
26532 Date: Tue Jul 3 00:34:14 2007 -0600
26534 Remove obsolete mpc83xx linker scripts
26538 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
26540 Date: Tue Jul 3 00:34:09 2007 -0600
26542 Consolidate mpc8260 linker scripts
26546 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
26548 Date: Tue Jul 3 00:34:04 2007 -0600
26550 Remove obsolete mpc824x linker scripts
26554 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
26556 Date: Tue Jul 3 00:33:59 2007 -0600
26558 Remove obsolete mpc824x linker scripts (3 of 4)
26562 commit a71c084f3ac7fedf144537db2b2da47323068833
26564 Date: Tue Jul 3 00:33:53 2007 -0600
26566 Remove obsolete mpc824x linker scripts (2 of 4)
26570 commit f670a15468d1365241d40022b9408e1004181f5e
26572 Date: Tue Jul 3 00:33:48 2007 -0600
26574 Remove obsolete mpc824x linker scripts (1 of 4)
26578 commit 09555bd45a04c0e54f172528d21bc18896550d28
26580 Date: Tue Jul 3 00:33:43 2007 -0600
26582 Remove obsolete mpc8220 linker scripts
26586 commit 5efb992f046e51225c93d52f80fecbe433abd789
26588 Date: Tue Jul 3 00:33:38 2007 -0600
26590 Remove obsolete mpc5xxx linker scripts (3 of 3)
26594 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
26596 Date: Tue Jul 3 00:33:33 2007 -0600
26598 Remove obsolete mpc5xxx linker scripts (2 of 3)
26602 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
26604 Date: Tue Jul 3 00:33:28 2007 -0600
26606 Remove obsolete mpc5xxx linker scripts (1 of 3)
26610 commit b7d8e05f8675249b5f208aa73babeed384a4519d
26612 Date: Tue Jul 3 00:33:23 2007 -0600
26614 Remove obsolete mpc5xx linker scripts
26618 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
26620 Date: Tue Jul 3 00:33:18 2007 -0600
26622 Consolidate mpc83xx linker scripts
26626 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
26628 Date: Tue Jul 3 00:33:13 2007 -0600
26630 Consolidate mpc8260 linker scripts
26634 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
26636 Date: Tue Jul 3 00:33:08 2007 -0600
26638 Consolidate mpc824x linker scripts
26642 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
26644 Date: Tue Jul 3 00:33:03 2007 -0600
26646 Consolidate mpc8220 linker scripts
26650 commit d181c9a15cd41863fe24840d17848429f27d3c8c
26652 Date: Tue Jul 3 00:32:58 2007 -0600
26654 Consolidate mpc5xxx linker scripts
26658 commit 287ac924adb7291bebe5086652a362a30ab28b13
26660 Date: Tue Jul 3 00:32:53 2007 -0600
26662 Consolidate mpc5xx linker scripts
26666 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
26668 Date: Wed Jul 4 00:43:53 2007 +0200
26670 Fix a few file permission problems.
26674 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
26676 Date: Wed Jul 4 00:38:38 2007 +0200
26678 Minor coding style cleanup. Rebuild CHANGELOG file.
26680 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
26682 Date: Mon Jun 11 19:03:44 2007 -0500
26684 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
26688 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
26690 Date: Mon Jun 11 19:03:39 2007 -0500
26692 README: Rewrite command line config to use CONFIG_CMD_* names.
26696 commit 72a074cec68e5bad60d63206c050974e08afd804
26698 Date: Mon Jun 11 19:03:34 2007 -0500
26700 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26702 This is a compatibility step that allows both the older form
26703 and the new form to co-exist for a while until the older can
26704 be removed entirely.
26706 All transformations are of the form:
26708 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26710 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26714 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
26716 Date: Mon Jun 11 19:03:28 2007 -0500
26718 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26720 This is a compatibility step that allows both the older form
26721 and the new form to co-exist for a while until the older can
26722 be removed entirely.
26724 All transformations are of the form:
26726 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26728 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26732 commit 9107ebe0d352420895ab69b715697bdebc8caf50
26734 Date: Mon Jun 11 19:03:23 2007 -0500
26736 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26738 This is a compatibility step that allows both the older form
26739 and the new form to co-exist for a while until the older can
26740 be removed entirely.
26742 All transformations are of the form:
26744 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26746 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26750 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
26752 Date: Mon Jun 11 19:03:19 2007 -0500
26754 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26756 This is a compatibility step that allows both the older form
26757 and the new form to co-exist for a while until the older can
26758 be removed entirely.
26760 All transformations are of the form:
26762 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26764 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26768 commit 737184114ec9c9e0ab94d6713536126073bd2472
26770 Date: Mon Jun 11 19:03:15 2007 -0500
26772 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26774 This is a compatibility step that allows both the older form
26775 and the new form to co-exist for a while until the older can
26776 be removed entirely.
26778 All transformations are of the form:
26780 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26782 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26786 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
26788 Date: Mon Jun 11 19:03:08 2007 -0500
26790 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26792 This is a compatibility step that allows both the older form
26793 and the new form to co-exist for a while until the older can
26794 be removed entirely.
26796 All transformations are of the form:
26798 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26800 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26804 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
26806 Date: Mon Jun 11 19:03:03 2007 -0500
26808 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26810 This is a compatibility step that allows both the older form
26811 and the new form to co-exist for a while until the older can
26812 be removed entirely.
26814 All transformations are of the form:
26816 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26818 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26822 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
26824 Date: Mon Jun 11 19:02:58 2007 -0500
26826 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26828 This is a compatibility step that allows both the older form
26829 and the new form to co-exist for a while until the older can
26830 be removed entirely.
26832 All transformations are of the form:
26834 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26836 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26840 commit 98b79003c21c2578206003256de4e781d6b36ca8
26842 Date: Mon Jun 11 19:02:53 2007 -0500
26844 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26846 This is a compatibility step that allows both the older form
26847 and the new form to co-exist for a while until the older can
26848 be removed entirely.
26850 All transformations are of the form:
26852 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26854 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26858 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
26860 Date: Mon Jun 11 19:02:49 2007 -0500
26862 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26864 This is a compatibility step that allows both the older form
26865 and the new form to co-exist for a while until the older can
26866 be removed entirely.
26868 All transformations are of the form:
26870 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26872 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26876 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
26878 Date: Mon Jun 11 19:02:34 2007 -0500
26880 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26882 This is a compatibility step that allows both the older form
26883 and the new form to co-exist for a while until the older can
26884 be removed entirely.
26886 All transformations are of the form:
26888 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26890 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26894 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
26896 Date: Mon Jun 11 19:02:20 2007 -0500
26898 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26900 This is a compatibility step that allows both the older form
26901 and the new form to co-exist for a while until the older can
26902 be removed entirely.
26904 All transformations are of the form:
26906 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26908 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26912 commit d5be43de93ff905c465e509d45a3164ef48d26e7
26914 Date: Mon Jun 11 19:02:10 2007 -0500
26916 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26918 This is a compatibility step that allows both the older form
26919 and the new form to co-exist for a while until the older can
26920 be removed entirely.
26922 All transformations are of the form:
26924 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26926 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26930 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
26932 Date: Mon Jun 11 19:02:05 2007 -0500
26934 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26936 This is a compatibility step that allows both the older form
26937 and the new form to co-exist for a while until the older can
26938 be removed entirely.
26940 All transformations are of the form:
26942 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26944 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26948 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
26950 Date: Mon Jun 11 19:01:54 2007 -0500
26952 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26954 This is a compatibility step that allows both the older form
26955 and the new form to co-exist for a while until the older can
26956 be removed entirely.
26958 All transformations are of the form:
26960 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26962 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26966 commit a76adc8142c1d956385a109e0b70f9319ede4d66
26968 Date: Mon Jun 11 19:01:43 2007 -0500
26970 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26972 This is a compatibility step that allows both the older form
26973 and the new form to co-exist for a while until the older can
26974 be removed entirely.
26976 All transformations are of the form:
26978 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26980 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26984 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
26986 Date: Mon Jun 11 19:01:34 2007 -0500
26988 Introduce initial versions of new Command Config files.
26990 Derive three new files from cmd_confdefs.h:
26991 config_bootp.h - Has BOOTP related config options, not commands
26992 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
26993 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
26995 For now, include "config_bootp.h" for compatability until all
26996 users of it directly include it properly.
27000 commit 1f2a05898658900dc5717761e27abf2052e67e13
27002 Date: Sat Jun 30 18:50:48 2007 +0200
27008 commit a5d71e290f3673269be8eefb4ec44f53412f9461
27010 Date: Mon Jun 25 19:11:37 2007 +0200
27012 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
27016 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
27018 Date: Mon Jun 25 17:03:13 2007 +0200
27020 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
27022 This patch prints the DDR status registers upon machine check
27023 interrupt on the 440EPx/GRx. This can be useful especially when
27024 ECC support is enabled.
27026 I added some small changes to the original patch from Niklaus to
27027 make it compile clean.
27032 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
27034 Date: Mon Jun 25 16:50:55 2007 +0200
27036 ppc4xx: Fix O=buildir builds
27038 This patch fixes the problem to assemble cpu/ppc4xx/start.S
27039 experienced last week where building failed having specified
27040 O=../build.sequoia.
27044 commit 466fff1a7bb5fe764a06450626f6098219f446b8
27046 Date: Mon Jun 25 15:57:39 2007 +0200
27048 ppc4xx: Add pci_pre_init() for 405 boards
27050 This patch removes the CFG_PCI_PRE_INIT option completely, since
27051 it's not needed anymore with the patch from Matthias Fuchs with
27052 the "weak" pci_pre_init() implementation.
27056 commit 6f35c53166213c24a5a0e2390ed861136ff73870
27058 Date: Sun Jun 24 17:41:21 2007 +0200
27060 ppc4xx: Maintenance patch for esd's CPCI405 derivats
27062 -add pci_pre_init() for pci interrupt fixup code
27063 -disable phy sleep mode via reset_phy() function
27064 -use correct io accessors
27069 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
27071 Date: Sun Jun 24 17:23:41 2007 +0200
27073 ppc4xx: Add pci_pre_init() for 405 boards
27075 This patch adds support for calling a plattform dependant
27076 pci_pre_init() function for 405 boards. This can be used to
27077 move the current pci_405gp_fixup_irq() function into the
27080 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
27081 A default function with 'weak' attribute is used when
27082 a board specific pci_pre_init() is not implemented.
27086 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
27088 Date: Fri Jun 22 23:59:00 2007 +0200
27090 Coding stylke cleanup; rebuild CHANGELOG
27092 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
27094 Date: Wed Apr 18 14:55:19 2007 +0400
27096 Adapt log buffer code to support Linux 2.6
27098 A new environment variable, "logversion", selects the log buffer
27099 behaviour. If it is not set or set to a value other than 2, then the
27100 old, Linux 2.4.4, behaviour is selected.
27105 commit a11e06965ec91270c51853407ff1261d3c740386
27107 Date: Wed Mar 28 19:06:19 2007 +0400
27109 Extend POST support for PPC440
27111 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
27116 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
27118 Date: Fri Jun 22 19:11:54 2007 +0200
27120 [PCS440EP] upgrade the PCS440EP board:
27121 - Show on the Status LEDs, some States of the board.
27122 - Get the MAC addresses from the EEProm
27124 - use the CF on the board.
27125 - check the U-Boot image in the Flash with a SHA1
27127 - use dynamic TLB entries generation for the SDRAM
27131 commit 3a1f5c81b0b9557817a789bece839905581c2205
27133 Date: Fri Jun 22 16:58:40 2007 +0200
27135 ppc4xx: Fix problem with extended program_tlb() funtion
27137 The recently extended program_tlb() function had a problem when
27138 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
27139 virtual address was not incremented. This patch fixes this issue
27140 and is tested on Katmai with 512MB SDRAM.
27144 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
27146 Date: Fri Jun 22 14:58:04 2007 +0200
27148 [ppc] Fix build breakage for all non-4xx PowerPC variants.
27150 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
27151 - minor 4xx cleanup
27153 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
27155 Date: Fri Jun 22 10:34:12 2007 +0200
27157 [patch] add nand_init() prototype to nand.h
27159 since nand_init() is expected to be called by other parts of u-boot, there
27160 should be a prototype for it in nand.h
27165 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
27167 Date: Wed Jun 20 18:14:24 2007 +0200
27169 Coding style cleanup. Refresh CHANGELOG.
27171 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
27173 Date: Tue Jun 19 17:22:44 2007 +0200
27175 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
27177 This patch adds a board command to configure the I2C bootstrap EEPROM
27178 values. Right now 533 and 667MHz are supported for booting either via NOR
27179 or NAND FLASH. Here the usage:
27181 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
27182 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
27186 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
27188 Date: Tue Jun 19 16:42:31 2007 +0200
27190 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
27192 The latest changes showed a problem with the location of the NAND-SPL
27193 image in the OCM and the init-data area (incl. cache). This patch
27194 fixes this problem.
27198 commit 86ba99e34194394052d24c04dc40d1263d29a26f
27200 Date: Tue Jun 19 16:40:58 2007 +0200
27202 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
27206 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
27208 Date: Mon Jun 18 13:50:13 2007 -0500
27210 Added M5329AFEE and M5329BFEE Platforms
27212 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
27213 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
27214 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
27217 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
27218 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
27219 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
27220 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
27221 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
27222 lib_m68k/time.c, net/eth.c and rtc/Makefile
27226 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
27228 Date: Sun Jun 17 19:04:11 2007 +0200
27230 [fix] email reparation
27232 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
27234 Date: Sun Jun 17 19:03:21 2007 +0200
27236 [FIX] fix microblaze file permitission
27238 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
27240 Date: Fri Jun 15 11:33:41 2007 +0200
27242 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
27244 Now CONFIG_440 has to be defined in all PPC440 board config files.
27248 commit efa35cf12d914d4caba942acd5a6c45f217de302
27250 Date: Fri Jun 15 11:19:28 2007 +0200
27252 ppc4xx: Clean up 440 exceptions handling
27254 - Introduced dedicated switches for building 440 and 405 images required
27255 for 440-specific machine instructions like 'rfmci' etc.
27257 - Exception vectors moved to the proper location (_start moved away from
27258 the critical exception handler space, which it occupied)
27260 - CriticalInput now serviced (with default handler)
27262 - MachineCheck properly serviced (added a dedicated handler and return
27265 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
27266 unhandled and those not relevant for 4xx were eliminated)
27268 - Eliminated Linux leftovers, removed dead code
27274 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
27276 Date: Fri Jun 15 08:18:01 2007 +0200
27278 [ppc4xx] Add initial lwmon5 board support
27280 This patch adds initial support for the Liebherr lwmon5 board euqipped
27281 with an AMCC 440EPx PowerPC.
27285 commit 85f737376d5ff3d5f0d45a8b657686326d175307
27287 Date: Fri Jun 15 07:39:43 2007 +0200
27289 [ppc4xx] Extend 44x GPIO setup with default output state
27291 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
27292 is extended with the default GPIO output state (level).
27296 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
27298 Date: Thu Jun 14 11:14:32 2007 +0200
27300 [ppc4xx] Extend program_tlb() with virtual & physical addresses
27302 Now program_tlb() allows to program a TLB (or multiple) with
27303 different virtual and physical addresses. With this change, now one
27304 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
27305 diabled and once with caches enabled.
27309 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
27311 Date: Wed May 23 19:02:41 2007 +0200
27313 Change 'repeatable' attribute of some commands to sensible values.
27315 Most prominently this changes 'erase' to be non-repeatable.
27319 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
27321 Date: Wed May 23 18:47:48 2007 +0200
27323 Fix 'run' not to continue after interrupted command
27327 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
27329 Date: Mon Jun 11 15:14:24 2007 +0200
27331 USB: This patch fix readl in ohci swap reg access.
27335 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
27337 Date: Fri Jun 8 14:52:22 2007 +0200
27339 TQM5200: Add Flat Device Tree support, update default env. accordingly.
27344 commit 9045f33c023f698660a2e45d1b2194c0711abebc
27346 Date: Fri Jun 8 10:24:58 2007 +0200
27348 Fix config problems on SC3 board; make ide_reset_timeout work.
27350 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
27352 Date: Fri Jun 8 09:55:24 2007 +0200
27354 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
27356 Set the correct value in GPIOx_TCR when configuring the gpio
27357 with CFG_440_GPIO_TABLE.
27362 commit f539edc076cfe52bff919dd512ba8d7af0e22092
27364 Date: Thu May 24 15:52:25 2007 -0700
27366 cosmetic changes to bcm570x driver
27368 This is a cosmetic only changes submission.
27369 It affects files relevant to bcm570x driver.
27370 the commands used to generate this change was
27373 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
27375 The BMW target (the only one using this chip so far) builds cleanly, the
27376 `before and after' generated object files for drivers/bcm570x.c and
27377 drivers/tigon3.o are identical as reported by objdump -d
27382 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
27384 Date: Wed Jun 6 16:26:56 2007 +0200
27386 Coding Style cleanup; generate new CHANGELOG file.
27390 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
27392 Date: Wed Jun 6 11:49:44 2007 +0200
27394 TRAB, USB: update trab board configuration for use of generic ohci driver
27396 commit dace45acd1c1357daa9322099d07c9a9e08b0024
27398 Date: Wed Jun 6 11:49:43 2007 +0200
27400 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
27402 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
27404 Date: Wed Jun 6 11:49:43 2007 +0200
27406 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
27408 commit fc43be478f2aa37ce38acd85355038866e4162af
27410 Date: Wed Jun 6 11:49:35 2007 +0200
27412 USB/OHCI: endianness cleanup in the generic ohci driver
27414 commit c440bfe6d6d92d66478a7e84402b31f48413617b
27416 Date: Wed Jun 6 11:42:13 2007 +0200
27418 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
27420 This patch adds NAND booting support for the AMCC Acadia eval board.
27422 Please make sure to configure jumper J7 to position 2-3 when booting
27423 from NOR, and to position 1-2 when booting for NAND.
27425 I also added a board command to configure the I2C bootstrap EEPROM
27426 values. Right now only 267MHz is support for booting either via NOR
27427 or NAND FLASH. Here the usage:
27429 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
27430 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
27434 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
27436 Date: Wed Jun 6 10:08:14 2007 +0200
27438 Files include/linux/byteorder/{big,little}_endian.h define
27439 __BIG_ENDIAN and __LITTLE_ENDIAN.
27443 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
27445 Date: Wed Jun 6 10:08:14 2007 +0200
27447 Add USB PCI-OHCI, USB keyboard and event poll support to the
27448 MPC8641HPCN board config file.
27452 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
27454 Date: Wed Jun 6 10:08:14 2007 +0200
27456 USB PCI-OHCI, interrupt pipe and usb event poll support
27458 This patch added USB PCI-OHCI chips support, interrupt pipe support
27459 and usb event poll support. For supporting the USB interrupt pipe, the
27460 globe urb_priv is moved to purb in ed struct. Now, we can process
27461 several urbs at one time. The interrupt pipe support codes are ported
27462 from Linux kernel 2.4.
27466 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
27468 Date: Wed Jun 6 10:08:13 2007 +0200
27470 USB event poll support
27472 This patch adds USB event poll support, which could be used in usbkbd
27473 and other usb devices driver when the asynchronous interrupt
27474 processing is supported.
27478 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
27480 Date: Wed Jun 6 10:08:12 2007 +0200
27482 ISP116x: delay for crappy USB keys
27484 Using some (very) slow USB keys cause the USB host controller buffers
27485 are not ready to be read by the CPU so we need an extra delay before
27486 reading the USB storage data.
27490 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
27492 Date: Wed Jun 6 10:08:12 2007 +0200
27494 Change duplicate usb_cpu_init_fail to usb_board_init_fail
27501 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
27503 Date: Tue Jun 5 12:30:52 2007 -0500
27505 mpc8641 image size cleanup
27507 e600 does not have a bootpg restriction.
27508 Move the version string to beginning of image at fff00000.
27509 Resetvec.S is not needed.
27510 Update flash copy instructions.
27511 Add tftpflash env variable
27516 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
27518 Date: Mon Jun 4 08:36:05 2007 +0200
27520 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
27522 The attached patch is mainly cosmetic, allowing u-boot to
27523 display the correct bootstrap option letter according to the
27526 The original patch was extended with 405EZ support by Stefan
27532 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
27534 Date: Wed May 23 12:45:19 2007 +0400
27536 fix compilation problem for mpc8349itx CFG_RAMBOOT
27538 Current include/configs/MPC8349ITX.h does contain some support for building
27539 image that will be started from memory (without putting in into flash).
27540 It could be triggered by building with TEXT_BASE set to a low value.
27542 However, this support is incomplete: using of low TEXT_BASE causes
27543 defining configuration macros in inconsistent way, which later leads
27544 to compilation errors. In particular. flash support is being disabled,
27545 but then flash structures get referenced.
27547 This patch fixes this, making it possible to build with low TEXT_BASE.
27553 commit 8a364f0970de49949d635e60accf463c6443ef8c
27555 Date: Wed May 23 12:45:25 2007 +0400
27557 add missing 'console' var to default mpc8349itx config
27561 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
27563 Date: Fri Jun 1 16:18:17 2007 +0200
27565 ppc4xx: Add missing file for Bamboo NAND booting support
27569 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
27571 Date: Fri Jun 1 15:58:19 2007 +0200
27573 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
27575 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
27576 suggested by AMCC it is not recommended to dynamically change the EBC
27577 speed after bootup. So we undo this change to be on the safe side.
27581 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
27583 Date: Fri Jun 1 15:29:04 2007 +0200
27585 ppc4xx: Update Sequoia NAND booting support with ECC
27589 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
27591 Date: Fri Jun 1 15:27:11 2007 +0200
27593 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
27595 This patch adds NAND booting support for the AMCC Bamboo eval board.
27596 Since the NAND-SPL boot image is limited to 4kbytes, this version
27597 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
27598 supported, since the setup code for I2C DIMM autodetection and
27599 configuration is too big for this NAND bootloader.
27603 commit 42be56f53c8b107868e6125c8524ae84293e95a7
27605 Date: Fri Jun 1 15:23:04 2007 +0200
27607 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
27609 The U-Boot NAND booting support is now extended to support ECC
27610 upon loading of the NAND U-Boot image.
27612 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
27616 commit a471db07fbb65a841ffc9f4f112562b945230f98
27618 Date: Fri Jun 1 15:19:29 2007 +0200
27620 ppc4xx: Prepare Bamboo port for NAND booting support
27622 This patch updates the "normal" Bamboo NOR booting port, so
27623 that it is compatible with the coming soon NAND booting
27626 It also enables the 2nd NAND flash on the Bamboo.
27630 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
27632 Date: Fri Jun 1 15:16:58 2007 +0200
27634 ppc4xx: Update in_be32() functions and friends to latest Linux version
27638 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
27640 Date: Fri Jun 1 15:15:12 2007 +0200
27642 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
27644 This patch adds hardware ECC support to the NDFC driver. It also
27645 changes the register access from using the "simple" in32/out32
27646 functions to the in_be32/out_be32 functions, which make sure
27647 that the access is correctly synced. This is the only recommended
27648 access to SoC registers in the current Linux kernel.
27652 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
27654 Date: Fri Jun 1 15:12:15 2007 +0200
27656 NAND: Update nand_ecc.c to latest Linux version
27658 This patch updates the nand_ecc code to the latest Linux version.
27659 The main reason for this is the more compact code. This makes
27660 it possible to include the ECC code into the NAND bootloader
27661 image (NAND_SPL) for PPC4xx.
27665 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
27667 Date: Fri Jun 1 15:09:50 2007 +0200
27669 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
27673 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
27675 Date: Fri Jun 1 13:45:24 2007 +0200
27677 ppc4xx: Change Luan config file to support ECC
27679 With the updated 44x DDR2 driver the Luan board now supports
27680 ECC generation and checking.
27684 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
27686 Date: Fri Jun 1 13:45:00 2007 +0200
27688 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
27690 Add config option for 180 degree advance clock control as needed
27691 for the AMCC Luan eval board.
27695 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
27697 Date: Thu May 31 17:20:09 2007 +0200
27699 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
27703 commit 7049288fb1f16f1b317140226cdebd07bd416395
27705 Date: Sun May 27 17:26:46 2007 +0200
27707 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
27711 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
27713 Date: Sun May 27 17:06:36 2007 +0200
27715 Motion-PRO: Add support for redundant environment.
27717 Enable redundant environment, add a MTD partition for it; also add env.
27718 variable command for passing MTD partitions to the kernel command line.
27723 commit a26eabeec31746f06d309103690892805696e344
27725 Date: Sun May 27 17:05:11 2007 +0200
27727 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
27729 Allow passing longer command line to the kernel - useful especially
27730 for passing MTD partition layout.
27735 commit 9160b96f71483a116de81c68985e8ee306d36764
27737 Date: Sun May 27 17:04:18 2007 +0200
27739 Fix: Add missing NULL termination in strings expanded by macros parser.
27744 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
27746 Date: Sun May 27 17:03:37 2007 +0200
27748 Motion-PRO: Update EEPROM's page write bits and write delay.
27750 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
27751 have a page write capability of two bytes", and "This device offers fast (1ms)
27752 byte write". Add 3ms of extra delay.
27757 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
27759 Date: Sun May 27 16:58:45 2007 +0200
27761 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
27763 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
27764 networking does not function. This commit switches PHY to TX mode by clearing
27765 the FX_SEL bit of Mode Control Register. It also reverses commit
27766 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
27771 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
27773 Date: Sun May 27 16:57:15 2007 +0200
27775 Motion-PRO: Add support for the temperature sensor.
27780 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
27782 Date: Sun May 27 16:55:23 2007 +0200
27784 Motion-PRO: Add displaying of CPLD revision information during boot.
27789 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
27791 Date: Sun May 27 16:53:43 2007 +0200
27793 MPC5xxx: Change names of defines related to IPB and PCI clocks.
27795 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
27796 them does not cause PCI or IPB clocks to run at the specified speed.
27797 Instead, they configure divisors used to calculate said clocks. This
27798 patch renames the defines according to their real function.
27803 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
27805 Date: Sun May 27 16:51:48 2007 +0200
27807 Motion-PRO: Add LED support.
27813 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
27815 Date: Thu May 24 12:12:47 2007 +0200
27817 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
27823 commit d756894722c888d09a9fa1df8323753772d3dcce
27825 Date: Thu May 24 09:49:00 2007 +0200
27827 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
27830 fixes a small bug in the 405EZ OCM initialization. Thanks for
27835 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
27837 Date: Thu May 24 08:22:09 2007 +0200
27839 ppc4xx: Update AMCC Acadia support for board revision 1.1
27841 This patch updates the Acadia (405EZ) support for the new 1.1 board
27842 revision. It also adds support for NAND FLASH via the 4xx NDFC.
27844 Please note that the jumper J7 must be in position 2-3 for this
27845 NAND support. Position 1-2 is for NAND booting only. NAND booting
27846 support will follow later.
27850 commit 822d55365bb557e084d0e33625a6dedcc866110b
27852 Date: Wed May 23 14:09:46 2007 -0500
27854 Add LIST_86xx MAKEALL target for PowerPC builds.
27858 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
27860 Date: Tue May 22 12:48:09 2007 +0200
27862 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
27866 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
27868 Date: Tue May 22 12:46:10 2007 +0200
27870 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
27872 This patch adds support for 405 PPC's to the 4xx NAND driver
27873 ndfc.c. This is in preparation for the new AMCC 405EZ.
27877 commit 10603d76767426be803dadd4fb688b97eb69481c
27879 Date: Mon May 21 07:41:22 2007 +0200
27881 ppc4xx: Fix problem in 405EZ OCM initialization
27883 As spotted by Bruce Adler this patch fixes an initialization problem
27888 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
27890 Date: Fri May 18 16:47:03 2007 +0100
27892 Reduce line lengths to 80 characters max.
27894 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
27896 Date: Fri May 18 14:34:07 2007 +0100
27898 Makefile permissions
27900 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
27902 Date: Fri May 18 14:33:11 2007 +0100
27904 Makefile permissions
27906 commit 255a3577c848706441daee0174543efe205a77f8
27908 Date: Wed May 16 16:52:19 2007 -0500
27910 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
27912 For all practical u-boot purposes, TSECs don't differ throughout the
27913 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
27917 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
27919 Date: Wed May 16 14:49:12 2007 +0200
27921 Fix compile problem cause my Microblaze merge
27925 commit ada4697d0230d6da552867777f98a67ec3ba2579
27927 Date: Wed May 16 13:23:10 2007 +0200
27929 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
27931 Because the Sequoia board does not boot with an EBC faster than 66MHz,
27932 the clock divider are changed after the initial boot process.
27934 This allows for maximum clocking speeds to be achieved on newer boards.
27935 Sequoia boards with 666.66 MHz processors require that the EBC divider
27936 be set to 3 in order to start the initial boot process at a slower EBC
27937 speed. After the initial boot process, the divider can be set back to 2,
27938 which will cause the boards to run at 83.333MHz. This is backward
27939 compatible with boards with 533.33 MHz processors, as these boards will
27940 already be set with an EBC divider of 2.
27944 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
27946 Date: Wed May 16 01:16:53 2007 +0200
27948 Minor Coding Style cleanup, update CHANGELOG.
27952 commit d62f64cc23a940eafe712c776b3249e4160753d1
27954 Date: Wed May 16 00:13:33 2007 +0200
27956 Coding Style Cleanup, new CHANGELOG
27958 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
27960 Date: Tue May 15 23:38:05 2007 +0200
27962 Minor coding style cleanup.
27964 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
27966 Date: Fri Apr 20 14:23:02 2007 +0530
27968 Add driver for S-ATA-controller on Intel processors with South
27969 Bridge, ICH-5, ICH-6 and ICH-7.
27973 1. Code is divided in to two files. All functions, which are
27974 controller specific are kept in "drivers/ata_piix.c" file and
27975 functions, which are not controller specific, are kept in
27976 "common/cmd_sata.c" file.
27978 2. Reading and Writing from the S-ATA drive is done using PIO method.
27980 3. Driver can be configured for 48-bit addressing by defining macro
27981 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
27984 4. S-ATA read function is hooked to the File system, commands like
27985 ext2ls and ext2load file can be used. This has been tested.
27987 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
27988 controller and identifies the S-ATA drives connected to it.
27990 6. U-Boot command "sata" is added, which is used to read/write, print
27991 partition table and get info about the drives present. This I have
27992 implemented in same way as "ide" command is implemented in U-Boot.
27994 7. This driver is for S-ATA in native mode.
27996 8. This driver does not support the Native command queuing and
28001 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
28003 Date: Mon Apr 30 15:57:22 2007 +0530
28005 Fixes bug clearing the bss section for i386
28008 There is a bug in the code of clearing the bss section for processor
28009 i386.(File: cpu/i386/start.S)
28010 In the code, bss_start addr (starting addr of bss section) is put into
28011 the register %eax, but the code which clears the bss section refers to
28012 the addr pointed by %edi.
28014 This patch fixes this bug by putting bss_start into %edi register.
28018 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
28020 Date: Mon Apr 30 16:47:28 2007 -0500
28022 Add support for BCM5464 Quad Phy
28024 Added support for Broadcom's BCM5464 Quad Phy
28028 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
28030 Date: Wed May 9 08:10:57 2007 +0800
28032 Search the exception table with linear algorithm
28034 Search the exception table with linear algorithm instead of
28035 bisecting algorithm.
28036 Because the exception table might be unsorted.
28040 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
28042 Date: Mon May 14 11:47:35 2007 +0800
28044 Fix compilation issues on MACOSX
28049 commit 56fd7162985c412317bbf763a225fba23c64fd31
28051 Date: Tue May 15 07:55:42 2007 -0700
28053 Fix for compile of JSE target
28055 The attached patch fixes the compile of the JSE board in the
28056 denx git as of 14 may 2007. It is an extremely simple patch,
28057 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
28059 Fix to compile JSE against 20070514 git of u-boot
28061 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
28062 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
28063 Date: Sun May 13 21:01:03 2007 +0900
28065 sh: MS7750SE support.
28067 This adds support for the Hitachi MS7750SE.
28071 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
28072 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
28073 Date: Sun May 13 20:58:00 2007 +0900
28075 sh: First support code of SuperH.
28079 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
28081 Date: Fri May 11 12:01:49 2007 +0200
28083 ppc4xx: Add mtcpr/mfcpr access macros
28087 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
28089 Date: Fri May 11 12:01:06 2007 +0200
28091 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
28095 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
28097 Date: Thu May 10 16:55:52 2007 +0200
28099 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
28102 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
28104 Date: Wed May 9 11:42:44 2007 +0100
28106 Add the board directory for SMN42
28108 commit 160131bf965785419626df6c388729fe0b597992
28110 Date: Wed May 9 11:41:58 2007 +0100
28112 Add the files for the SMN42 board
28114 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
28116 Date: Wed May 9 11:40:34 2007 +0100
28118 Remove the deleted files for the SMN42 patch
28120 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
28122 Date: Wed May 9 11:37:56 2007 +0100
28124 New board SMN42 branch
28126 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
28128 Date: Wed May 9 10:24:38 2007 +0100
28130 Makefile permissions
28132 commit b84289b595731e8851df46e893845cc1322c9b9b
28134 Date: Tue May 8 14:17:07 2007 -0500
28136 8641hpcn: Fix Makefile after moving pixis to board/freescale.
28138 The OBJTREE != SRCTREE build scenario was broken.
28144 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
28146 Date: Tue May 8 15:57:43 2007 +0200
28148 add: reading special purpose registers
28150 commit 1a50f164beb065f360fbddb76029607d6b099698
28152 Date: Tue May 8 14:52:52 2007 +0200
28154 add: Microblaze V5 exception handling
28156 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
28158 Date: Tue May 8 14:39:11 2007 +0200
28160 add: FSL control read and write
28162 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
28164 Date: Tue May 8 13:05:44 2007 +0200
28166 [Motion-PRO] Add support for I2C, EEPROM and RTC.
28168 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
28170 Date: Tue May 8 10:23:56 2007 +0200
28172 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
28175 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
28177 Date: Tue May 8 09:39:12 2007 +0200
28179 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
28180 eliminates networking problems in Linux (timeouts).
28182 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
28184 Date: Tue May 8 09:21:57 2007 +0200
28186 [Motion-PRO] Enable Flat Device Tree support and modify default environment
28187 to allow booting of FDT-expecting kernels.
28189 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
28191 Date: Mon May 7 23:58:31 2007 +0200
28193 new: USE_MSR_INTR support
28195 commit 008861a2f3ef2c062744d733787c7e530a1b8761
28197 Date: Mon May 7 22:36:15 2007 +0200
28199 [MPC5xxx] There are networking problems on the Motion-PRO board with
28200 current PHY initalization code (tftp timeouts all the time). This commit
28201 temporarily disables PHY initalization sequence to make the networking
28202 operational, until a fix is found.
28204 commit abca901869c3760b6c5fecb825db6c1d91a78a93
28206 Date: Mon May 7 22:10:36 2007 +0200
28208 Get rid of duplicated file (see include/configs/sbc8560.h instead)
28212 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
28214 Date: Mon May 7 22:07:08 2007 +0200
28216 Get rid of duplicated file (see doc/README.SBC8560 instead)
28220 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
28222 Date: Mon May 7 19:43:10 2007 +0200
28224 fix: read and write MSR - repair number of parameters
28226 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
28228 Date: Mon May 7 19:42:49 2007 +0200
28230 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
28232 A '3' got cut off in the formatting of the last patch to automatically
28233 change the clock speed of the system clock on sequoia board.
28238 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
28240 Date: Mon May 7 19:33:51 2007 +0200
28242 new: fsl interrupt support
28243 FSL_Has_data is connected to INTC.
28245 commit 792032baa7d625e34c981ab6df521911bd8dc861
28247 Date: Mon May 7 19:30:12 2007 +0200
28249 fix: interrupt handler
28252 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
28254 Date: Mon May 7 19:25:08 2007 +0200
28256 fix: remove asm code
28258 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
28260 Date: Mon May 7 19:12:43 2007 +0200
28262 fix: clean interrupt
28264 commit 42efed6130c8fcf7da881385b5427065d2801757
28266 Date: Mon May 7 17:22:25 2007 +0200
28268 fix: interrupt handler for multiple sources
28270 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
28272 Date: Mon May 7 17:11:09 2007 +0200
28274 new: add writing to msr register
28276 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
28278 Date: Mon May 7 16:43:56 2007 +0200
28280 Fix an ancient CHANGELOG conflict
28282 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
28284 Date: Sat May 5 08:12:30 2007 +0200
28286 5xxx: write MAC address to mac-address and local-mac-address
28288 Some device trees have a mac-address property, some have local-mac-address,
28289 and some have both. To support all of these device trees, ftp_cpu_setup()
28290 should write the MAC address to mac-address and local-mac-address, if they
28296 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
28298 Date: Sun Apr 29 14:01:54 2007 +0200
28300 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
28302 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
28303 message. Use PVR to distinguish between the two variants, and print proper CPU
28310 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
28312 Date: Wed Apr 25 16:01:26 2007 +0200
28314 [PATCH] simplify silent console
28319 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
28321 Date: Mon Apr 23 15:30:39 2007 +0200
28323 [PATCH] Avoid assigning PCI resources from zero address
28325 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
28326 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
28327 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
28328 sentence about "0" being considered an invalid address) -- so, use a reasonable
28329 starting value of 0x1000 (that's what the most Linux archs are using).
28331 Alternatively, one might have fixed the calls to pci_set_region() individually
28332 (some code even seems to have taken care of this issue) but that would have
28333 been a lot more work. :-)
28338 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
28340 Date: Mon Apr 23 14:00:11 2007 +0200
28342 [patch] setenv(...) can delete environmentalvariables
28344 update setenv() function so that entering a NULL value for the
28345 variable's value will delete the environmental variable
28350 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
28352 Date: Mon Apr 23 13:54:24 2007 +0200
28354 [patch] use unsigned char in smc91111 driver for mac
28356 the v_mac variable in the smc91111 driver is declared as a signed char ...
28357 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
28358 because when it gets printed out, you get a display like:
28359 0xFFFFFFE0 and that's no good
28363 commit ffc50f9bb194343c6303517a517708457a5eb6b8
28365 Date: Sat May 5 18:54:42 2007 +0200
28367 new: FSL and MSR support #2
28369 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
28371 Date: Sat May 5 18:27:16 2007 +0200
28373 new: FSL and MSR support
28375 commit 2f15278c2eb911c668b4fe562130b78cf554d139
28377 Date: Sat May 5 18:23:11 2007 +0200
28379 Coding stylke cleanup; update CHANGELOG.
28383 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
28385 Date: Sat May 5 18:05:02 2007 +0200
28387 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
28391 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
28393 Date: Sat May 5 17:15:50 2007 +0200
28395 Make "file" command happy with some config.mk files; update CHANGELOG
28397 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
28399 Date: Sat May 5 08:32:14 2007 +0200
28401 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
28403 The AMCC Secquoia board has been changed in a new revision from using a
28404 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
28405 indicates the difference. This patch reads that bit and uses the correct
28406 clock speed for the board. This code is backward compatable will all
28407 prior boards. All prior boards will be read as 33.000.
28412 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
28414 Date: Sat May 5 08:29:01 2007 +0200
28416 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
28418 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
28419 for the 4k NAND boot image so define bus_frequency to 133MHz here
28420 which is save for the refresh counter setup.
28424 commit 2f550ab976405300f5b07bf2890800840d0aa05f
28426 Date: Sat May 5 08:12:30 2007 +0200
28428 5xxx: write MAC address to mac-address and local-mac-address
28430 Some device trees have a mac-address property, some have local-mac-address,
28431 and some have both. To support all of these device trees, ftp_cpu_setup()
28432 should write the MAC address to mac-address and local-mac-address, if they
28438 commit a79886590593ba1d667c840caa4940c61639f18f
28440 Date: Sat May 5 07:04:42 2007 +0200
28442 NAND: Wrong calculation of page number in nand_block_bad()
28444 In case that there is no memory based bad block table available the
28445 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
28446 nand_block_bad() directly. When parameter 'getchip' is set to zero,
28447 nand_block_bad() will not right shift the offset to calculate the
28448 correct page number.
28453 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
28455 Date: Fri May 4 10:02:33 2007 +0200
28457 Fix initrd length corruption in bootm command.
28459 When using FDT Images, the length of an inital ramdisk was
28460 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
28462 Patches by Timur Tabi & Johns Daniel.
28466 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
28468 Date: Thu May 3 19:43:52 2007 -0500
28470 mpc83xx: fix trivial error in MAKEALL
28474 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
28476 Date: Thu May 3 16:34:41 2007 +0200
28478 Update board configuration for STX GP3SSA board:
28480 Enable hush shell, environment in flash rather in EEPROM,
28481 more user-friendly default environment, etc.
28482 The simple EEPROM environment can be selected easily in the board
28487 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
28489 Date: Tue Apr 24 14:37:49 2007 +0200
28491 Cleanup STX GP3SSA code; fix build and compile problems.
28493 commit 35171dc04e028ecacc23ad916a66295472555dbf
28495 Date: Fri Jan 5 09:15:34 2007 +0100
28497 Add support for STX GP3SSA (stxssa) Board
28501 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
28503 Date: Wed May 2 13:31:53 2007 +0200
28505 macb: Don't restart autonegotiation if we already have link
28507 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
28508 link is already up.
28512 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
28514 Date: Wed May 2 13:22:38 2007 +0200
28516 macb: Introduce a few barriers when dealing with DMA descriptors
28518 There were a few theoretical possibilities that the compiler might
28519 optimize away DMA descriptor reads and/or writes and thus cause
28520 synchronization problems with the hardware. Insert barriers where
28521 we depend on reads/writes actually hitting memory.
28525 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
28527 Date: Sat Feb 24 01:08:13 2007 -0600
28529 Cleaned up some 85xx PCI bugs
28531 * Cleaned up the CDS PCI Config Tables and added NULL entries to
28533 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
28534 * Fixed 85xx PCI code to assign powar region sizes based on the
28535 config values (rather than hard-coding them)
28536 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
28540 commit 6743105988fc44d5b0d30388c790607835aae7a6
28542 Date: Mon Apr 23 02:54:25 2007 -0500
28544 Add support for the 8568 MDS board
28546 This included some changes to common files:
28547 * Add 8568 processor SVR to various places
28548 * Add support for setting the qe bus-frequency value in the dts
28549 * Add the 8568MDS target to the Makefile
28553 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
28555 Date: Fri Apr 20 14:34:48 2007 -0500
28557 Add support for treating unknown PHYs as generic PHYs.
28559 When bringing up u-boot on new boards, PHY support sometimes gets
28560 neglected. Most PHYs don't really need any special support,
28561 though. By adding a generic entry that always matches if nothing
28562 else does, we can provide support for "unsupported" PHYs for the
28565 The generic PHY driver supports most PHYs, including gigabit.
28570 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
28572 Date: Wed Feb 7 15:28:04 2007 -0600
28574 Conditionalize 8641 Rev1.0 MCM workarounds
28579 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
28581 Date: Mon Apr 30 13:59:50 2007 -0500
28583 Fix memory initialization on MPC8349E-mITX
28585 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
28586 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
28587 on some ITX boards, notably those with a revision 3.1 CPU.
28589 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
28590 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
28596 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
28598 Date: Mon Apr 30 15:26:21 2007 -0500
28600 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
28602 and fix CPU: to align with Board: display text.
28606 commit c1ab82669d9525998c34e802a12cad662723f22a
28608 Date: Fri Mar 16 13:02:53 2007 -0500
28610 Rewrote picos_to_clk() to avoid rounding errors.
28611 Clarified that conversion is to DRAM clocks rather than platform clocks.
28612 Made function static to spd_sdram.c.
28617 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
28619 Date: Sun Apr 29 14:13:01 2007 +0200
28621 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
28625 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
28627 Date: Sun Apr 29 14:01:54 2007 +0200
28629 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
28631 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
28632 message. Use PVR to distinguish between the two variants, and print proper CPU
28639 commit 5c5d3242935cf3543af01142627494434834cf98
28641 Date: Wed Apr 25 12:34:38 2007 -0500
28643 mpc83xx: minor fixups for 8313rdb introduction
28645 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
28647 Date: Wed Apr 25 16:01:26 2007 +0200
28649 [PATCH] simplify silent console
28654 commit 144876a380f5756f57412caf74c1d6dc201dd796
28656 Date: Tue Apr 24 23:01:02 2007 +0200
28658 [PATCH] MTD partition support, JFFS2 support
28660 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
28662 Date: Tue Apr 24 14:03:45 2007 +0200
28664 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
28668 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
28670 Date: Mon Apr 23 02:37:47 2007 -0500
28672 Reworked 85xx speed detection code
28674 Changed the code to read the registers and calculate the clock
28675 rates, rather than using a "switch" statement.
28681 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
28683 Date: Mon Apr 23 02:24:28 2007 -0500
28685 Enable 8544 support
28687 * Add support to the Makefile
28688 * Add 8544 configuration support to the tsec driver
28689 * Add 8544 SVR numbers to processor.h
28694 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
28696 Date: Fri Feb 23 17:12:25 2007 -0600
28698 Support 1G size on 8548
28700 e500v2 and newer cores support 1G page sizes.
28705 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
28707 Date: Fri Feb 23 17:11:16 2007 -0600
28709 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
28711 The other pagesz constants use one letter to specify order of
28712 magnitude. Also change the one reference to it in mpc8548cds/init.S
28716 commit 1f9a318cea14272edd10d63739e2d326c90f430e
28718 Date: Fri Feb 23 16:28:46 2007 -0600
28720 Only set ddrioovcr for 8548 rev1.
28725 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
28727 Date: Sat Feb 24 01:16:45 2007 -0600
28729 Tweak DDR ECC error counter
28731 Enable single-bit error counter when memory was cleared by ddr controller.
28736 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
28738 Date: Mon Feb 12 13:34:55 2007 -0600
28740 85xx: write MAC address to mac-address and local-mac-address
28742 Some device trees have a mac-address property, some have local-mac-address,
28743 and some have both. To support all of these device trees, ftp_cpu_setup()
28744 should write the MAC address to mac-address and local-mac-address, if they
28749 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
28751 Date: Mon Apr 23 01:44:44 2007 -0500
28753 Some 85xx cpu cleanups
28755 * Cleaned up the TSR[WIS] clearing
28756 * Cleaned up DMA initialization
28762 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
28764 Date: Mon Apr 23 01:32:22 2007 -0500
28766 Add cpu support for the 8544
28768 Recognize new SVR values, and add a few register definitions
28774 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
28776 Date: Wed Apr 11 16:51:02 2007 -0500
28778 Add MPC8544DS basic port board files.
28780 Add board port under new board/freescale directory
28781 structure and reuse existing PIXIS FPGA support there.
28786 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
28788 Date: Wed Apr 11 16:50:57 2007 -0500
28790 Add MPC8544DS main configuration file.
28795 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
28797 Date: Wed Dec 27 22:07:15 2006 +0300
28799 Fix PCI I/O space mapping on Freescale MPC85x0ADS
28801 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
28802 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
28803 describing the local address window used for the PCI I/O space accesses -- fix
28804 this and carry over the necessary changes into the MPC8560ADS code since the
28805 PCI I/O space mapping was also broken for this board (by the earlier commit
28806 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
28807 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
28811 board/mpc8540ads/init.S | 4 ++--
28812 board/mpc8560ads/init.S | 4 ++--
28813 include/configs/MPC8540ADS.h | 5 ++---
28814 include/configs/MPC8541CDS.h | 2 +-
28815 include/configs/MPC8548CDS.h | 2 +-
28816 include/configs/MPC8560ADS.h | 8 ++++----
28817 6 files changed, 12 insertions(+), 13 deletions(-)
28819 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
28821 Date: Tue Dec 5 16:42:30 2006 +0800
28823 u-boot: Fix e500 v2 core reset bug
28825 The following patch fixes the e500 v2 core reset bug.
28826 For e500 v2 core, a new reset control register is added to reset the
28831 commit 63247a5acd58032e6cf33f525bc3923b467bac88
28833 Date: Wed Dec 20 11:01:00 2006 +0800
28835 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
28837 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
28838 entry number to control the loop. This can reduce the potential risk
28839 for the 85xx processor increasing its TLB adn LAW entry number.
28844 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
28846 Date: Mon Dec 18 17:01:04 2006 +0800
28848 u-boot: Fix the 85xxcds tsec bug
28850 Fix the 85xxcds tsec bug.
28851 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
28855 commit 7337b237ffc4aaf1b9467024fe472a880d852598
28857 Date: Fri Dec 15 14:43:31 2006 +0800
28859 u-boot: Fix CPU2 errata on MPC8548CDS board
28861 This patch apply workaround of CPU2 errata on MPC8548CDS board.
28865 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
28867 Date: Mon Dec 18 16:25:15 2006 +0800
28869 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
28871 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
28875 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
28877 Date: Thu Dec 14 14:14:55 2006 +0800
28879 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
28881 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
28885 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
28887 Date: Mon Apr 16 14:54:15 2007 -0500
28889 mpc83xx: Add MPC8313ERDB support.
28893 commit 49ea3b6eafe606285ae4d5c378026153dde53200
28895 Date: Mon Apr 16 14:34:21 2007 -0500
28897 mpc83xx: Add generic PCI setup code.
28899 Board code can now request the generic setup code rather than having to
28900 copy-and-paste it for themselves. Boards should be converted to use this
28901 once they're tested with it.
28905 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
28907 Date: Mon Apr 16 14:34:19 2007 -0500
28909 mpc83xx: Add 831x support to speed.c.
28913 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
28915 Date: Mon Apr 16 14:34:18 2007 -0500
28917 mpc83xx: Add 831x support to global_data.h
28921 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
28923 Date: Mon Apr 16 14:34:16 2007 -0500
28925 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
28927 Rather than misleadingly define PVR_83xx as the specific type of 83xx
28928 being built for, the PVR of each core revision is defined. checkcpu() now
28929 prints the core that it detects, rather than aborting if it doesn't find
28930 what it thinks it wants.
28934 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
28936 Date: Mon Apr 16 14:34:15 2007 -0500
28938 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
28942 commit d87c57b201b4572d16f1b642998faa00c9912b16
28944 Date: Mon Apr 16 14:31:55 2007 -0500
28946 mpc83xx: Add register definitions for MPC831x.
28950 commit 7fc4c71a143be8666d70803fb25ae60379c95622
28952 Date: Mon Apr 23 15:39:59 2007 +0200
28958 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
28960 Date: Mon Apr 23 15:30:39 2007 +0200
28962 [PATCH] Avoid assigning PCI resources from zero address
28964 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
28965 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
28966 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
28967 sentence about "0" being considered an invalid address) -- so, use a reasonable
28968 starting value of 0x1000 (that's what the most Linux archs are using).
28970 Alternatively, one might have fixed the calls to pci_set_region() individually
28971 (some code even seems to have taken care of this issue) but that would have
28972 been a lot more work. :-)
28977 commit afb903a2eb9436baa9270ccc0c27082d86497d89
28979 Date: Mon Apr 23 14:00:11 2007 +0200
28981 [patch] setenv(...) can delete environmentalvariables
28983 update setenv() function so that entering a NULL value for the
28984 variable's value will delete the environmental variable
28989 commit 36f104e5caa747d568eff26b369565af57c2ffa6
28991 Date: Mon Apr 23 13:54:24 2007 +0200
28993 [patch] use unsigned char in smc91111 driver for mac
28995 the v_mac variable in the smc91111 driver is declared as a signed char ...
28996 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
28997 because when it gets printed out, you get a display like:
28998 0xFFFFFFE0 and that's no good
29002 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
29004 Date: Mon Apr 23 13:10:52 2007 +0200
29006 USB: (Another) delay for crappy USB keys.
29008 Some USB keys are slow in giving back an answer when the Root HUB
29009 enables power lines.
29013 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
29015 Date: Mon Apr 23 12:00:22 2007 +0200
29017 Remove BOARDLIBS usage completely
29021 commit 32556443840f127170e4baa8bdd5b567039f6c36
29023 Date: Sat Apr 21 21:07:22 2007 +0200
29025 [PATCH] SystemACE support for Microblaze
29027 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
29029 Date: Sat Apr 21 21:02:40 2007 +0200
29031 16bit read/write little endian
29033 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
29035 Date: Sat Apr 21 20:53:31 2007 +0200
29037 Change ML401 parameters - Xilinx BSP
29039 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
29041 Date: Wed Feb 28 05:37:29 2007 -0600
29043 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
29047 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
29049 Date: Fri Jan 19 10:42:37 2007 +0800
29051 Enable LAWs for MPC8641 PCI-Ex2.
29056 commit bd7851ce1e1f140665b520026abf1042968b1102
29058 Date: Fri Apr 20 14:12:26 2007 -0500
29060 mpc86xx; Write MAC address to mac-address and local-mac-address
29062 Some device trees have a mac-address property, some have local-mac-address,
29063 and some have both. To support all of these device trees, ftp_cpu_setup()
29064 should write the MAC address to mac-address and local-mac-address, if they
29070 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
29072 Date: Fri Apr 20 14:11:38 2007 -0500
29074 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
29079 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
29081 Date: Fri Apr 20 17:43:28 2007 +0200
29083 Cleanup compiler warnings, update CHANGELOG
29087 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
29089 Date: Fri Apr 20 12:01:47 2007 +0200
29091 Fix breakage of NC650 board with respect to nand support.
29095 commit 39f23cd90947639ac278a18ff277ec786b5ac167
29097 Date: Fri Apr 20 11:13:16 2007 +0200
29099 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
29101 G2 core reference manual says decrementer and time base
29102 are decreasing/increasing once every 4 bus clock cycles.
29103 Lets fix it, so time in Linux won't run twice as fast
29108 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
29110 Date: Thu Apr 19 23:14:39 2007 -0400
29112 Fix serious pointer bug with bootm and reserve map.
29114 What was suppose to be a stack variable was declared as a pointer,
29115 overwriting random memory.
29116 Also moved the libfdt.a requirement into the main Makefile. That is
29119 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
29121 Date: Thu Apr 19 09:53:52 2007 +0200
29123 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
29125 Previous versions used full wait states for the chip select #1 which
29126 is connected to the Xilinix SystemACE controller on the AMCC Katmai
29127 evaluation board. This leads to really slow access and therefore low
29128 performance. This patch now sets up the chip select a lot faster
29129 resulting in much better read/write performance of the Linux driver.
29133 commit 37837828d89084879bee2f2b8c7c68d4695940df
29135 Date: Wed Apr 18 17:49:29 2007 +0200
29137 Clenaup, update CHANGELOG
29141 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
29143 Date: Wed Apr 18 17:20:58 2007 +0200
29149 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
29151 Date: Wed Apr 18 17:07:26 2007 +0200
29153 Cleanup, update CHANGELOG
29157 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
29159 Date: Wed Apr 18 16:17:46 2007 +0200
29163 commit ad4eb555671d97f96dc56eab55103b1f86874b01
29165 Date: Wed Apr 18 14:30:39 2007 +0200
29167 MCC200 board: remove warning which is obsolete after PSoC firmware changes
29171 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
29173 Date: Wed Apr 18 12:11:05 2007 +0200
29175 [PATCH] icecube/lite5200b: document wakeup from low-power support
29179 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
29181 Date: Wed Apr 18 12:07:47 2007 +0200
29183 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
29187 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
29189 Date: Wed Apr 18 12:05:59 2007 +0200
29191 ppc4xx: Add output for bootrom location to 405EZ ports
29193 Now 405EZ ports also show upon bootup from which boot device
29194 they are configured to boot:
29196 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
29198 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
29199 Bootstrap Option E - Boot ROM Location EBC (32 bits)
29200 16 kB I-Cache 16 kB D-Cache
29201 Board: Acadia - AMCC PPC405EZ Evaluation Board
29205 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
29207 Date: Tue Apr 17 13:30:33 2007 +0100
29209 Move ppearse to ARM board list
29210 Add Konstantin Kletschke for scb9328.
29213 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
29215 Date: Mon Apr 16 14:00:13 2007 +0200
29217 [PATCH] icecube/lite5200b: wakeup from low-power support
29219 U-Boot part of Lite5200b low power mode support.
29220 Puts SDRAM out of self-refresh and transfers control to
29221 address saved at physical 0x0.
29226 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
29228 Date: Sun Apr 15 13:54:26 2007 -0400
29230 Fix the ft_cpu_setup() property settings.
29232 Use "setter" functions instead of flags, cleaner and more flexible.
29233 It also fixes the problem noted by Timur Tabi that the ethernet MAC
29234 addresses were all being set incorrectly to the same MAC address.
29236 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
29238 Date: Sat Apr 14 22:51:24 2007 -0400
29240 Improve the bootm command for CONFIG_OF_LIBFDT
29242 In bootm, create the "/chosen" node only if it doesn't already exist
29243 (better matches the previous behavior).
29244 Update for proper reserved memory map handling for initrd.
29246 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
29248 Date: Sat Apr 14 22:46:41 2007 -0400
29250 Add some utilities to manipulate the reserved memory map.
29252 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
29254 Date: Sat Apr 14 21:16:54 2007 +0200
29258 commit 8e6875183cdca91c134408d119d4abcd48ef6856
29260 Date: Sun Dec 17 18:56:46 2006 +0100
29262 AVR32: Enable MMC support
29264 Set up the portmux for the MMC interface and enable the MMC driver
29265 along with support for DOS partitions, ext2 and FAT filesystems.
29269 commit fc26c97bb6df41b4a95662c34054fe912387bf38
29271 Date: Fri Jan 20 10:03:53 2006 +0100
29275 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
29277 The AT91 ARM-based CPUs use basically the same hardware, so it should
29278 be possible to share this driver, but no effort has been made so far.
29280 Hardware documentation can be found in the AT32AP7000 data sheet,
29281 which can be downloaded from
29283 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
29287 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
29289 Date: Sun Dec 17 18:55:37 2006 +0100
29291 AVR32: Add clk and gpio infrastructure for mmci
29293 Implement functions for configuring the mmci pins, as well as
29294 functions for getting the clock rate of the mmci controller.
29298 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
29300 Date: Sun Dec 17 18:53:56 2006 +0100
29302 Enable partition support with MMC
29304 Include implementations of init_part() and get_partition_info() when
29309 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
29311 Date: Sun Dec 17 17:14:30 2006 +0100
29313 AVR32: Enable networking
29315 Implement MACB initialization for AVR32 and ATSTK1000, and turn
29316 everything on, including the MACB driver.
29320 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
29322 Date: Fri Jan 20 10:03:34 2006 +0100
29324 Atmel MACB ethernet driver
29326 Driver for the Atmel MACB on-chip ethernet controller.
29328 This driver has been tested on the ATSTK1000 board with a AT32AP7000
29329 CPU. It should probably work on AT91SAM926x as well with some minor
29332 Hardware documentation can be found in the AT32AP7000 data sheet,
29333 which can be downloaded from
29335 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
29339 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
29341 Date: Sun Dec 17 16:56:14 2006 +0100
29343 AVR32: Add clk and gpio infrastructure for macb0 and macb1
29345 Implement functions for configuring the macb0 and macb1 pins, as
29346 well as functions for getting the clock rate of the various
29347 busses the macb ethernet controllers are connected to.
29351 commit d5acb95b16a0a74c643524342c3437e765426d05
29353 Date: Sun Dec 17 15:39:15 2006 +0100
29355 AVR32: Implement simple DMA memory allocator
29357 Implement dma_alloc_coherent() which returns cache-aligned
29358 uncacheable memory.
29362 commit 91975b0fea773c9e681fea8cf3349669f27685ee
29364 Date: Sun Dec 17 15:46:02 2006 +0100
29366 Import <linux/mii.h> from the Linux kernel
29368 Instead of creating yet another set of MII register definitions
29369 in the macb driver, here's a complete set of definitions for everyone
29374 commit 1b804b229556a4d862da93c0ec94e79419364b2c
29376 Date: Wed Mar 21 19:47:36 2007 +0100
29378 AVR32: Include more commands for ATSTK1000
29380 Include the imi, imls and jffs commands sets by default on ATSTK1000.
29381 Also define CONFIG_BOOTARGS to something more useful, define
29382 CONFIG_BOOTCOMMAND and enable autoboot by default.
29386 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
29388 Date: Wed Mar 21 19:44:48 2007 +0100
29390 AVR32: Provide a definition of struct stat
29392 Copy the definition of struct stat from the Linux kernel.
29396 commit 12f099c08167a7a51aeee623bc16dafd0841271c
29398 Date: Sun Dec 17 14:46:06 2006 +0100
29400 AVR32: Use initdram() instead of board_init_memories()
29402 Conform to the "standard" interface and use initdram() instead of
29403 board_init_memories() on AVR32. This enables us to get rid of the
29404 sdram_size member of the global_data struct as well.
29408 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
29410 Date: Mon Nov 20 15:53:10 2006 +0100
29412 AVR32: Relocate u-boot to SDRAM
29414 Relocate the u-boot image into SDRAM like everyone else does. This
29415 means that we can handle much larger .data and .bss than we used to.
29419 commit df548d3c3e2bbc40258713167859ffc2ce99a900
29421 Date: Sun Nov 19 18:06:53 2006 +0100
29423 AVR32: Resource management rewrite
29425 Rewrite the resource management code (i.e. I/O memory, clock gating,
29426 gpio) so it doesn't depend on any global state. This is necessary
29427 because this code is heavily used before relocation to RAM, so we
29428 can't write to any global variables.
29430 As an added bonus, this makes u-boot's memory footprint a bit smaller,
29431 although some functionality has been left out; all clocks are enabled
29432 all the time, and there's no checking for gpio line conflicts.
29436 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
29438 Date: Sat Nov 18 18:01:13 2006 +0100
29440 AVR32: Clean up memory-map.h for at32ap7000
29442 Convert spaces to tabs (must have missed this one last time around),
29443 sort the entries by address and group them together by bus
29448 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
29450 Date: Sat Nov 18 17:32:31 2006 +0100
29452 AVR32: Build position-independent u-boot
29454 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
29455 position independent. This will make relocation a lot easier.
29457 -mno-init-got means that gcc shouldn't emit code to load the GOT
29458 address into r6 in every function prologue. We do it once and for
29459 all in the early startup assembly code, so enabling this option
29460 makes u-boot a bit faster and smaller.
29462 The assembly parts have always been position-independent, so no code
29463 changes should be necessary.
29467 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
29469 Date: Sat Nov 18 17:24:31 2006 +0100
29471 AVR32: Use avr32-linux- cross-compilation prefix by default
29473 It doesn't really matter which toolchain you use to compile u-boot,
29474 but the avr32-linux one is probably what most people have installed.
29478 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
29480 Date: Sat Nov 18 17:15:30 2006 +0100
29482 AVR32: Split start_u_boot into board_init_f and board_init_r
29484 Split the avr32 initialization code into a function to run before
29485 relocation, board_init_f and a function to run after relocation,
29486 board_init_r. For now, board_init_f simply calls board_init_r
29491 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
29493 Date: Sat Apr 14 05:26:48 2007 +0200
29495 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
29496 clear the Display after reset.
29500 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
29502 Date: Fri Apr 13 09:13:33 2007 +0200
29504 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
29506 Fix bug introduced by "Fix get_partition_info() parameter error in all
29507 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
29508 to use diskboot or scsiboot form another device than 0.
29512 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
29514 Date: Fri Apr 13 08:02:24 2007 +0200
29516 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
29521 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
29523 Date: Fri Mar 9 19:08:25 2007 +0800
29525 Fix two bugs for MPC83xx DDR2 controller SPD Init
29527 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
29528 the first bug is that the picos_to_clk routine introduces a huge
29529 rounding error in 83xx.
29530 the second bug is that the mode register write recovery field is
29531 tWR-1, not tWR >> 1.
29533 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
29535 Date: Thu Apr 12 14:15:59 2007 +0200
29537 ppc4xx: Fix i2c divisor calcularion for PPC4xx
29539 This patch fixes changes the i2c_init(...) function to use the function
29540 get_OPB_freq() rather than calculating the OPB speed by
29541 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
29542 specific per processor. The prior method was not and so was calculating
29543 the wrong speed for some PPC4xx processors.
29548 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
29550 Date: Wed Apr 11 17:25:01 2007 +0200
29556 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
29558 Date: Wed Apr 11 17:22:55 2007 +0200
29560 Update for SC3 board
29562 * Make IDE timeout configurable through ide_reset_timeout variable.
29563 * Use Newline as "password" string
29564 * Use just a single partition in NAND flash
29566 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
29568 Date: Mon Jan 22 12:37:30 2007 -0600
29570 Add PIXIS FPGA support for MPC8641HPCN board.
29572 Move the 8641HPCN's PIXIS code to the new directory
29573 board/freescale/common/ as it will be shared by
29574 future boards not in the same processor family.
29576 Write a "pixis_reset" command that utilizes the FPGA
29577 reset sequencer to support alternate soft-reset options
29578 such as using the "alternate" flash bank, enabling
29579 the watch dog, or choosing different CPU frequencies.
29581 Add documentation for the pixis_reset to README.mpc8641hpcn.
29586 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
29588 Date: Fri Apr 6 14:19:43 2007 -0400
29590 Moved fdt command support code to fdt_support.c
29592 ...in preparation for improving the bootm command's handling of fdt blobs.
29593 Also cleaned up some coding sloppiness.
29595 commit 6679f9299534e488a171a9bb8f9bb891de247aab
29597 Date: Fri Apr 6 14:17:14 2007 -0400
29599 libfdt: Make fdt_check_header() public
29601 Changed _fdt_check_header() to fdt_check_header() and made it part of
29602 the interface - it is a useful routine.
29604 Also did some asthetics cleanup to the include files (headers).
29606 commit c0707ce65677650b5ceab0500ee50ae5168afef2
29608 Date: Thu Apr 5 18:34:06 2007 +0800
29610 [Blackfin][PATCH] Kill off a bunch of common local prototypes
29612 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
29614 Date: Thu Apr 5 18:33:04 2007 +0800
29616 [Blackfin][PATCH] Fix dynamic CPLB generation issue
29618 commit 0445e3a264251d75b1be45ef713c70726a2952f0
29620 Date: Thu Apr 5 18:31:47 2007 +0800
29622 [Blackfin][PATCH] minior cleanup
29624 commit 155fd766573981090e638b493d5857562151862e
29626 Date: Thu Apr 5 18:31:18 2007 +0800
29628 [Blackfin][PATCH] Fix copyright and update license
29630 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
29632 Date: Thu Apr 5 18:30:25 2007 +0800
29634 [Blackfin][PATCH] Add BF537 EMAC driver initialization
29636 commit 889256e8604e0c68db1d866d720894dffede9df6
29638 Date: Thu Apr 5 18:29:55 2007 +0800
29640 [Blackfin][PATCH] call real the system synchronize instruction
29642 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
29644 Date: Thu Apr 5 18:29:17 2007 +0800
29646 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
29648 commit dfeeab2cd680df047e68e723b246adf6f33bb556
29650 Date: Thu Apr 5 18:28:34 2007 +0800
29652 [Blackfin][PATCH]: fix flash unaligned copy issue
29654 commit 443feb740584e406efa203af909fe2926608e8d5
29656 Date: Wed Mar 21 09:55:01 2007 +0300
29658 Update usage of 'nc' in README.NetConsole
29660 Added information about usage of NetConsole on systems where the -l and -p
29661 switches are mutually exclusive.
29666 commit 31c98a88228021b314c89ebb8104fb6473da4471
29668 Date: Wed Apr 4 02:09:30 2007 +0200
29670 Minor coding style cleanup.
29672 commit 94abd7c0583ebe01e799b25f451201deeaab550d
29674 Date: Wed Apr 4 01:49:15 2007 +0200
29678 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
29680 Date: Tue Apr 3 14:27:18 2007 +0200
29682 Support for the Philips ISP116x HCD (Host Controller Driver)
29686 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
29688 Date: Tue Apr 3 14:27:08 2007 +0200
29690 USB: cleanup monahans usb support. Remove dead code.
29694 commit a65c5768e5537530bd1780af3d3fddc3113a163c
29696 Date: Mon Apr 2 10:09:30 2007 +0200
29698 ppc4xx: Change SysACE address on Katmai
29700 With this new base address of the Xilinx SystemACE controller
29701 the Linux driver will be easier to adapt, since it can now be
29702 mapped via the "normal" ioremap() call.
29706 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
29708 Date: Sat Mar 31 14:30:53 2007 -0400
29710 Fix some minor whitespace violations.
29712 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
29714 Date: Sat Mar 31 12:23:51 2007 -0400
29716 Add a flattened device tree (fdt) command (2 of 2)
29718 Modifications to the existing code to support the new fdt command.
29720 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
29722 Date: Sat Mar 31 12:22:10 2007 -0400
29724 Add a flattened device tree (fdt) command (1 of 2)
29726 The fdt command uses David Gibson's libfdt library to manipulate as well
29727 as print the flattened device tree. This patch is the new command,
29728 the second part is the modifications to the existing code.
29730 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
29732 Date: Sat Mar 31 12:13:43 2007 -0400
29734 libfdt: Enhanced and published fdt_next_tag()
29736 Enhanced the formerly private function _fdt_next_tag() to allow stepping
29737 through the tree, used to produce a human-readable dump, and made
29738 it part of the published interface.
29739 Also added some comments.
29741 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
29743 Date: Sat Mar 31 12:05:39 2007 -0400
29745 libfdt: Customizations for use by u-boot.
29747 Changes to David Gibson's original source to fit into u-boot's
29748 environment. No functionality changes.
29750 commit 35748177c64a4a83a00057e93bb33e40278a2a96
29752 Date: Sat Mar 31 12:00:56 2007 -0400
29754 libfdt: Import libfdt source (2 of 2)
29756 This adds the applicable libfdt source files (unmodified) and a README
29757 to explain where the source came from.
29759 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
29761 Date: Sat Mar 31 11:59:59 2007 -0400
29763 libfdt: Import libfdt source (1 of 2)
29765 This adds the applicable libfdt source files (unmodified) and a README
29766 to explain where the source came from.
29768 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
29770 Date: Sat Mar 31 13:16:23 2007 +0200
29772 ppc4xx: Update Katmai bootstrap command
29774 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
29779 commit cabee756a6532986729477c3cc1ea16ef8517ad2
29781 Date: Sat Mar 31 13:15:06 2007 +0200
29783 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
29785 Additional RAM information is now printed upon powerup, like
29786 DDR2 frequency and CAS latency.
29790 commit 60723803431ac75cad085690789e433d5ab9174e
29792 Date: Sat Mar 31 08:48:36 2007 +0200
29794 ppc4xx: Change Yucca config file to support ECC
29796 With the updated 44x DDR2 driver the Yucca board now supports
29797 ECC generation and checking.
29801 commit 490e5730c674b20d708b783a2c5ffd7208f83873
29803 Date: Sat Mar 31 08:47:34 2007 +0200
29805 ppc4xx: Fix "bootstrap" command for Katmai board
29807 The board specific "bootstrap" command is now fixed and can
29808 be used for the AMCC Katmai board to configure different
29809 CPU/PLB/OPB frequencies.
29813 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
29815 Date: Sat Mar 31 08:46:08 2007 +0200
29817 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
29819 Fix a bug in the auto calibration routine. This driver now runs
29820 more reliable with the tested modules. It's also tested with
29821 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
29825 commit 342cd097be1e7affe82f42ab3da220959a699e64
29827 Date: Fri Mar 30 22:52:09 2007 +0200
29829 [PATCH] Clean include dependence
29831 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
29833 Date: Fri Mar 30 22:42:45 2007 +0200
29835 [CLEAN] Remove inefficient Suzaku code
29837 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
29839 Date: Wed Mar 28 15:03:16 2007 +0200
29841 Merge some AMCC make targets to keep the top-level Makefile smaller
29845 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
29847 Date: Wed Mar 28 14:52:12 2007 +0200
29849 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
29851 The "old" i2c commands (iprobe, imd...) are now compiled in again,
29852 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
29857 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
29859 Date: Tue Mar 27 00:32:16 2007 +0200
29861 PATCH: Resolve GPL license problem
29863 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
29865 Date: Mon Mar 26 12:03:36 2007 +0200
29867 PXA: pxa27x USB OHCI support
29871 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
29873 Date: Mon Mar 26 11:21:05 2007 +0200
29875 USB: remove the S3C24X0_merge #define, which was introduced while
29876 merging OHCI drivers.
29880 commit 1798049522f594013aea29457d46794298c6ae15
29882 Date: Mon Mar 26 01:39:07 2007 +0200
29884 Support for XUPV2P board
29886 BSP autoconfig support
29888 commit 0d974d5297349504a2ddfa09314be573b5df320a
29890 Date: Sat Mar 24 15:57:09 2007 +0100
29892 [PATCH] Add 4xx GPIO functions
29894 This patch adds some 4xx GPIO functions. It also moves some of the
29895 common code and defines into a common 4xx GPIO header file.
29899 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
29901 Date: Sat Mar 24 15:55:58 2007 +0100
29903 [PATCH] Small Sequoia cleanup
29907 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
29909 Date: Sat Mar 24 15:45:34 2007 +0100
29911 [PATCH] Clean up 40EZ/Acadia support
29913 This patch cleans up all the open issue of the preliminary
29918 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
29920 Date: Tue Dec 12 11:02:20 2006 -0600
29922 Fix 8641HPCN problem with ld version 2.16
29924 (Dot outside sections problem).
29926 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
29930 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
29932 Date: Thu Dec 7 10:35:55 2006 -0600
29934 Set Rev 2.x 86xx PIC in mixed mode.
29936 Prevent false interrupt from hanging Linux as MSR[EE] is set
29937 to enable interrupts by changing the PIC out of the default
29938 pass through mode into mixed mode.
29943 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
29945 Date: Thu Dec 7 10:32:35 2006 -0600
29947 Add flash cmd function to 8641HPCN ramboot
29949 Also fixes some commmand for 8641 HPCN ramboot case.
29954 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
29956 Date: Thu Dec 7 10:34:14 2006 -0600
29958 Add support for 8641 Rev 2 silicon.
29960 Without this patch, I am unable to get to the prompt on rev 2 silicon.
29961 Only set ddrioovcr for rev1.
29966 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
29968 Date: Thu Mar 22 00:13:12 2007 +0100
29970 Code cleanup / re-insert previous Copyright entries.
29974 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
29976 Date: Wed Mar 21 23:26:15 2007 +0100
29978 Code cleanup. Update CHANGELOG
29980 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
29982 Date: Wed Mar 21 14:54:29 2007 +0100
29984 ppc4xx: Fix file mode of include/configs/acadia.h
29988 commit d5f4614c9350d9333e575100fb250aab774d0258
29990 Date: Wed Mar 21 14:41:46 2007 +0100
29992 SPC1920: fix small clock routing bug
29996 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
29998 Date: Wed Mar 21 13:39:57 2007 +0100
30000 [PATCH] Add AMCC Acadia (405EZ) eval board support
30002 This patch adds support for the new AMCC Acadia eval board.
30004 Please note that this Acadia/405EZ support is still in a beta stage.
30005 Still lot's of cleanup needed but we need a preliminary release now.
30009 commit e01bd218b00af73499331a1a701625a852cd286f
30011 Date: Wed Mar 21 13:38:59 2007 +0100
30013 [PATCH] Add AMCC PPC405EZ support
30015 This patch adds support for the new AMCC 405EZ PPC. It is in
30016 preparation for the AMCC Acadia board support.
30018 Please note that this Acadia/405EZ support is still in a beta stage.
30019 Still lot's of cleanup needed but we need a preliminary release now.
30023 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
30025 Date: Wed Mar 21 08:45:17 2007 +0100
30027 [PATCH] TQM8272: dont change the bits given from the HRCW
30028 for the SIUMCR and BCR Register.
30029 Fix the calculation for the EEprom Size
30033 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
30035 Date: Tue Mar 20 18:16:24 2007 +0800
30037 [Blackfin][PATCH] Add BF561 EZKIT board support
30039 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
30041 Date: Mon Mar 19 22:55:58 2007 +0800
30043 [Blackfin][PATCH] minor cleanup
30045 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
30047 Date: Mon Mar 19 13:10:08 2007 +0100
30049 Remove obsoleted POST files.
30053 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
30055 Date: Mon Mar 19 01:26:11 2007 +0800
30057 [PATCH] Add flash chip M29W320ET/B support
30059 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
30061 Date: Mon Mar 19 01:24:52 2007 +0800
30063 [Blackfin][PATCH] Add BF537 stamp board support
30065 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
30067 Date: Fri Mar 16 21:11:42 2007 +0100
30069 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
30071 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
30072 DDR memory are dynamically programmed matching the total size
30073 of the equipped memory (DIMM modules).
30077 commit 76d1466f918b881cda2d259254761e73885093c2
30079 Date: Tue Mar 13 13:38:05 2007 +0100
30081 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
30082 boards in terms of unification.
30086 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
30088 Date: Tue Mar 13 16:05:55 2007 +0100
30090 Make SC3 board build with 'make O='; use 'addcons' consistently
30091 (SC3 and Jupiter used to use 'addcon' instead).
30095 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
30097 Date: Tue Mar 13 09:40:59 2007 +0100
30099 [PATCH] update board config for jupiter Board:
30101 CONFIG_CMDLINE_EDITING,
30102 CFG_ENV_ADDR_REDUND activated
30106 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
30108 Date: Mon Mar 12 12:11:55 2007 +0800
30110 [Blackfin][PATCH] minor cleanup
30112 commit bfa5754a58477ac917d21527cd0f079d87cf188e
30114 Date: Mon Mar 12 01:42:06 2007 +0800
30116 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
30118 commit 8440bb14581a294375c34b91b42512f9753d1130
30120 Date: Mon Mar 12 00:25:14 2007 +0800
30122 [Blackfin][PATCH] code cleanup
30124 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
30126 Date: Sun Mar 11 13:48:24 2007 +0100
30128 [Microblaze][PATCH] part 2
30130 interrupt controller support
30134 board information support
30136 booting image support
30138 adding support for Xilinx ML401
30140 commit 76316a318de91f6184e7c22a10e02d275ade2441
30142 Date: Sun Mar 11 13:42:58 2007 +0100
30144 [Microblaze][PATCH]
30146 interrupt controller support
30150 board information support
30152 booting image support
30154 adding support for Xilinx ML401
30156 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
30158 Date: Sat Mar 10 23:49:29 2007 +0800
30160 [Blackfin][PATCH] code cleanup
30162 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
30164 Date: Fri Mar 9 13:40:56 2007 +0800
30166 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
30168 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
30170 Date: Fri Mar 9 13:38:44 2007 +0800
30172 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
30174 commit 992423ab43c2bcf6b704853bd00af77450915e20
30176 Date: Thu Mar 8 23:00:08 2007 +0100
30178 ppc4xx: Fix file mode of sequoia.c
30182 commit eb92f613556800f7483666db09d9a237ad911d4a
30184 Date: Thu Mar 8 22:52:51 2007 +0100
30188 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
30190 Date: Thu Mar 8 09:39:48 2007 -0600
30192 ppc4xx: Clear Sequoia/Rainier security engine reset bits
30196 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
30198 Date: Thu Mar 8 16:26:52 2007 +0100
30200 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
30204 commit d9fc703246840c4b268debf48c334ba55c597dc0
30206 Date: Thu Mar 8 16:25:47 2007 +0100
30208 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
30212 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
30214 Date: Thu Mar 8 16:23:11 2007 +0100
30216 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
30220 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
30222 Date: Thu Mar 8 16:20:32 2007 +0100
30224 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
30228 commit f9fc6a5852a6335840882fa2111925010eea1abe
30230 Date: Wed Mar 7 15:32:01 2007 +0100
30232 fixed ethernet phy configuration for plu405 board
30236 commit 769104c9356594deb2092e204a39c05b33202d6c
30238 Date: Thu Mar 8 21:49:27 2007 +0100
30242 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
30244 Date: Thu Mar 8 10:13:16 2007 +0100
30246 [PATCH] Update AMCC Luan 440SP eval board support
30248 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
30249 inititializition. This includes DDR auto calibration and support
30250 for different DIMM modules, instead of the fixed setup used in
30251 the earlier version.
30253 This patch also enables the cache in FLASH for the startup
30254 phase of U-Boot (while running from FLASH). After relocating to
30255 SDRAM the cache is disabled again. This will speed up the boot
30256 process, especially the SDRAM setup, since there are some loops
30257 for memory testing (auto calibration).
30261 commit 2f5df47351910a2936c7741cf111855829200943
30263 Date: Thu Mar 8 10:10:18 2007 +0100
30265 [PATCH] Update AMCC Yucca 440SPe eval board support
30267 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
30268 inititializition. This includes DDR auto calibration and support
30269 for different DIMM modules, instead of the fixed setup used in
30270 the earlier version.
30274 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
30276 Date: Thu Mar 8 10:07:18 2007 +0100
30278 ppc4xx: Small AMCC Katmai 440SPe update
30282 commit df294497479b1dca6dd86318b2a912f72fede0df
30284 Date: Thu Mar 8 10:06:09 2007 +0100
30286 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
30290 commit 83853178bd36bca6f0f8f1331476620c84a587fc
30292 Date: Wed Mar 7 12:14:50 2007 -0600
30294 net - Support ping reply when processing net-loop
30296 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
30298 This permits the ping command to test the phy interface when the phy
30299 is put in loopback mode (typically by setting register 0 bit 14).
30301 It also allows the port to respond to an external ping when u-boot is
30302 processing some other net command (such as tftp). This is useful when
30303 tftp appears to hang.
30308 commit fa1aef15bcd47736687be1af544506e90fba545d
30310 Date: Wed Mar 7 16:43:00 2007 +0100
30312 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
30314 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
30315 DDR memory are dynamically programmed matching the total size
30316 of the equipped memory (DIMM modules).
30320 commit e2ebe696818939e2b974628be9c921ea3fe9de13
30322 Date: Wed Mar 7 16:39:36 2007 +0100
30324 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
30326 This patch fixes a problem that occurs when 2 DIMM's are
30327 used. This problem was first spotted and fixed by Gerald Jackson
30329 problem in a little more clever way.
30331 This patch also adds the nice functionality to dynamically
30332 create the TLB entries for the SDRAM (tlb.c). So we should
30333 never run into such problems with wrong (too short) TLB
30334 initialization again on these platforms.
30336 As this feature is new to the "old" 44x SPD DDR driver, it
30337 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
30341 commit 39218433983417b9df087976a79e3f80dd5e83d6
30343 Date: Wed Mar 7 16:33:44 2007 +0100
30345 UC101: fix compiler warnings
30347 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
30349 Date: Wed Mar 7 16:19:46 2007 +0100
30351 HMI1001: fix build error, cleanup compiler warnings.
30353 commit ad5bb451ade552c44bef9119d907929ebc2c126f
30355 Date: Tue Mar 6 18:08:43 2007 +0100
30357 Restructure POST directory to support of other CPUs, boards, etc.
30359 commit a5284efd125967675b2e9c6ef7b95832268ad360
30361 Date: Tue Mar 6 18:01:47 2007 +0100
30363 Fix HOSTARCH handling.
30364 Patch by Mike Frysinger, Mar 05 2007
30366 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
30368 Date: Tue Mar 6 07:47:04 2007 +0100
30370 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
30372 As provided by the AMCC applications team, this patch optimizes the
30373 DDR2 setup for 166MHz bus speed. The values provided are also save
30374 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
30375 setup has to be adjusted as done in this patch.
30377 For this the NAND booting version had to include the "speed.c" file
30378 from the cpu/ppc4xx directory. With this addition the NAND SPL image
30379 will just fit into the 4kbytes of program space. gcc version 4.x as
30380 provided with ELDK 4.x is needed to generate this optimized code.
30384 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
30386 Date: Sun Mar 4 01:36:05 2007 +0100
30390 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
30392 Date: Wed Feb 28 00:02:04 2007 -0600
30394 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
30396 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
30398 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
30400 Date: Tue Feb 27 23:51:42 2007 -0600
30402 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
30404 The config value for:
30412 Were not being used when setting the appropriate register
30415 * CFG_SCCR_USBMPHCM
30420 To allow full config of the SCCR.
30422 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
30423 that were just bogus.
30427 commit d51b3cf371cd441030460ef19d36b2924c361b1a
30429 Date: Thu Feb 22 20:06:57 2007 -0600
30431 mpc83xx: update [local-]mac-address properties on UEC based devices
30433 8360 and 832x weren't updating their [local-]mac-address
30434 properties. This patch fixes that.
30438 commit 61f4f912acbe60776c5e00df1ec94094ce672957
30440 Date: Tue Feb 13 10:41:42 2007 -0600
30442 mpc83xx: write MAC address to mac-address and local-mac-address
30444 Some device trees have a mac-address property, some have local-mac-address,
30445 and some have both. To support all of these device trees, this patch
30446 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
30447 This function already updates local-mac-address.
30451 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
30453 Date: Tue Feb 27 18:41:08 2007 -0600
30455 mpc83xx: add command line editing by default
30457 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
30459 Date: Wed Feb 14 19:50:53 2007 -0600
30461 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
30463 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
30464 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
30466 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
30471 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
30473 Date: Wed Feb 14 18:27:17 2007 +0800
30475 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
30477 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
30478 it pass DDR/DDR2 compliance tests.
30482 commit b110f40bd180c6b560276589beedf753e97c46ce
30484 Date: Wed Feb 14 18:27:06 2007 +0800
30486 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
30488 MPC8360E rev2.0 have new spridr,and PVR value,
30489 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
30493 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
30495 Date: Wed Feb 14 18:26:44 2007 +0800
30497 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
30499 MPC8349E rev3.1 have new spridr,and PVR value,
30500 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
30504 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
30506 Date: Wed Jan 31 11:04:19 2007 +0100
30508 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
30510 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
30511 which is used to se if an slave will ACK after receiving its address.
30513 Correct i2c probing to use this method as the old method could upset
30514 a slave as it wrote a data byte to it.
30516 Add a small delay in i2c_init() to let the controller
30517 shutdown any ongoing I2C activity.
30521 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
30523 Date: Wed Jan 31 15:54:29 2007 -0600
30525 mpc83xx: Add support for the MPC8349E-mITX-GP
30527 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
30528 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
30529 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
30533 commit fab16807adad350f618024350c6950165c247c72
30535 Date: Wed Jan 31 15:54:20 2007 -0600
30537 mpc83xx: Delete sdram_init() for MPC8349E-mITX
30539 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
30540 never does anything. This patch deletes it.
30544 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
30546 Date: Fri Jan 19 10:43:26 2007 +0800
30548 mpc83xx: Fix the LAW1/3 bug
30550 The patch solves the alignment problem of the local bus access windows to
30551 render accessible the memory bank and PHY registers of UPC 1 (starting at
30552 0xf801 0000). What we actually did was to adjust the sizes of the bus
30553 access windows so that the base address alignment requirement would be met.
30559 commit 97c4b397dce236a7318b304667bf89e59d08b17c
30561 Date: Tue Jan 30 16:15:31 2007 -0600
30563 mpc83xx: don't hang if watchdog configured on 8360, 832x
30565 don't hang if watchdog configured on 8360, 832x
30567 The watchdog programming model is the same across all 83xx devices;
30568 make the code reflect that.
30570 commit b70047478570e371ce7223be342ce98afea0f7d6
30572 Date: Tue Jan 30 16:15:21 2007 -0600
30574 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
30576 protect memcpy to bad address if a local-mac-address is missing from dt
30578 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
30580 Date: Tue Jan 30 16:15:04 2007 -0600
30582 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
30584 make 8360 default environment fdt be 8360 (not 8349)
30586 commit a28899c910024a0226331df07207b1038c300c93
30588 Date: Tue Jan 30 16:14:50 2007 -0600
30590 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
30592 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
30593 be used for busy-waiting since it strips the 'volatile' property from
30594 the bd variable. gcc3 was working by pure luck.
30596 This is a follow on patch to "Fix the UEC driver bug of QE"
30598 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
30600 Date: Tue Jan 30 14:08:30 2007 -0600
30602 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
30604 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
30605 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
30606 CONFIG_MPC834X so they are more generic.
30610 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
30612 Date: Thu Jan 25 13:40:55 2007 -0600
30614 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
30616 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
30618 Date: Wed Jan 24 17:18:37 2007 -0600
30620 mpc83xx: sort Makefile targets
30622 reordered targets alphabetically
30624 commit 91e25769771c1164ed63ffca0add49f934ae3343
30626 Date: Tue Jan 16 11:38:14 2007 -0500
30628 mpc83xx: U-Boot support for Wind River SBC8349
30630 I've redone the SBC8349 support to match git-current, which
30631 incorporates all the MPC834x updates from Freescale since the 1.1.6
30632 release, including the DDR changes.
30634 I've kept all the SBC8349 files as parallel as possible to the
30635 MPC8349EMDS ones for ease of maintenance and to allow for easy
30636 inspection of what was changed to support this board. Hence the SBC8349
30637 U-Boot has FDT support and everything else that the MPC8349EMDS has.
30639 Fortunately the Freescale updates added support for boards using CS0,
30640 but I had to change spd_sdram.c to allow for board specific settings for
30641 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
30642 default if the board doesn't specify a value.)
30644 Hopefully this should be mergeable as-is and require no whitespace
30645 cleanups or similar, but if something doesn't measure up then let me
30646 know and I'll fix it.
30651 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
30653 Date: Thu Dec 14 19:03:21 2006 +0800
30655 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
30657 A redundant semicolon existed in mpc8349itx.c
30662 commit f35f358241c549be3f75cfe2eaa642914275b7ba
30664 Date: Wed Dec 6 21:23:55 2006 -0500
30666 mpc83xx: Put the version (and magic) after the HRCW.
30668 Put the version (and magic) after the HRCW. This puts it in a fixed
30669 location in flash, not at the start of flash but as close as we can get.
30673 commit 48aecd969171a6e99a55fae04933857787f9a5bd
30675 Date: Thu Dec 7 21:14:51 2006 +0800
30677 mpc83xx: Add the MPC832XEMDS board readme
30679 Add the MPC832XEMDS board readme
30683 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
30685 Date: Thu Dec 7 21:13:15 2006 +0800
30687 mpc83xx: Add support for the MPC832XEMDS board
30689 This patch supports DUART, ETH3/4 and PCI etc.
30693 commit e080313c32322e15ab5a18eb896a252858c57284
30695 Date: Thu Dec 7 21:11:58 2006 +0800
30697 mpc83xx: streamline the 83xx immr head file
30699 For better format and style, I streamlined the 83xx head files,
30700 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
30701 duplicated macro definition appear in the both files; 2) the structure
30702 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
30703 macro definition put inside the each structure. So, I cleaned up the
30704 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
30705 moved the macro definition to mpc83xx.h, Just like MPC8260.
30709 *streamline the 83xx immr head file
30713 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
30715 Date: Wed Dec 6 11:38:17 2006 +0800
30717 mpc83xx: Fix the UEC driver bug of QE
30719 The patch prevents the GCC tool chain from striping useful code for
30720 optimization. It will make UEC ethernet driver workable, Otherwise the
30721 UEC will fail in tx when you are using gcc4.x. but the driver can work
30722 when using gcc3.4.3.
30726 *Prevent the GCC from striping code for optimization, Otherwise the UEC
30727 will tx failed when you are using gcc4.x.
30731 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
30733 Date: Thu Mar 1 21:11:36 2007 +0100
30735 [PATCH] Update AMCC Katmai 440SPe eval board support
30737 This patch updates the recently added Katmai board support. The biggest
30738 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
30741 Please note, that still some problems are left with some memory
30742 configurations. See the driver for more details.
30746 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
30748 Date: Thu Mar 1 07:03:25 2007 +0100
30750 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
30754 commit ccbc7036648e465697ca298ba51e0e76dda352a0
30756 Date: Wed Feb 28 01:28:53 2007 +0100
30758 SC3: fix typo in default environment
30760 commit e344568b1b46af85ec32d815586f91bc115d6223
30762 Date: Tue Feb 27 20:15:30 2007 +0300
30764 MCC200: Fixes for update procedure
30766 - fix logic error in image type handling
30767 - make sure file system images (cramfs etc.) get stored in flash
30768 with image header stripped so they can be mounted through MTD
30770 commit 743571145b37182757d4e688a77860b36ee77573
30772 Date: Tue Feb 27 14:26:04 2007 +0100
30774 Minor code cleanup.
30776 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
30778 Date: Tue Feb 27 12:40:16 2007 +0300
30780 MCC200 update - add LCD Progress Indicator
30782 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
30784 Date: Thu Feb 22 07:43:34 2007 +0100
30786 [PATCH] get_dev() now unconditionally uses manual relocation
30788 Since the relocation fix is not included yet and we're not sure how
30789 it will be added, this patch removes code that required relocation
30790 to be fixed for now.
30794 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
30796 Date: Thu Feb 22 07:40:23 2007 +0100
30798 [PATCH] Change systemace driver to select 8 & 16bit mode
30800 As suggested by Grant Likely this patch enables the Xilinx SystemACE
30801 driver to select 8 or 16bit mode upon startup.
30805 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
30807 Date: Wed Feb 21 16:52:31 2007 +0100
30809 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
30811 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
30812 is fully finished. The sync() is defined in each CPU's io.h file. For
30813 those CPUs which do not need sync for now, a dummy sync() is defined in
30814 their io.h as well.
30818 commit da04995c7dc6772013a9a0dc5c767f190c402478
30820 Date: Wed Feb 21 13:44:34 2007 +0100
30822 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
30826 commit 751bb57107d78978ae08e697c3deba816f5be091
30828 Date: Tue Feb 20 13:21:57 2007 +0100
30830 [PATCH] Fix relocation problem with "new" get_dev() function
30832 This patch enables the "new" get_dev() function for block devices
30833 introduced by Grant Likely to be used on systems that still suffer
30834 from the relocation problems (manual relocation neede because of
30835 problems with linker script).
30837 Hopefully we can resolve this relocation issue soon for all platform
30838 so we don't need this additional code anymore.
30842 commit d93e2212f962668b3dce091ff5edc33f2347fe37
30844 Date: Tue Feb 20 13:17:42 2007 +0100
30846 [PATCH] Update SystemACE driver for 16bit access
30848 This patch removes some problems when the Xilinx SystemACE driver
30849 is used with 16bit access on an big endian platform (like the
30854 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
30856 Date: Tue Feb 20 13:15:40 2007 +0100
30858 [PATCH] Clean up Katmai (440SPe) linker script
30862 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
30864 Date: Tue Feb 20 10:57:08 2007 +0100
30866 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
30870 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
30872 Date: Tue Feb 20 10:51:26 2007 +0100
30874 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
30876 This patch switches to the desired I2C bus when the date/dtt
30877 commands are called. This can be configured using the
30878 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
30882 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
30884 Date: Tue Feb 20 10:43:34 2007 +0100
30886 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
30888 This patch adds support for the DDR2 controller used on the
30889 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
30890 board and works fine with the following DIMM modules:
30892 - Corsair CM2X512-5400C4 (512MByte per DIMM)
30893 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
30894 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
30896 This patch also adds the nice functionality to dynamically
30897 create the TLB entries for the SDRAM (tlb.c). So we should
30898 never run into such problems with wrong (too short) TLB
30899 initialization again on these platforms.
30903 commit 36d830c9830379045f5daa9f542ac1c990c70068
30905 Date: Tue Feb 20 10:35:42 2007 +0100
30907 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
30909 Since the existing 4xx SPD SDRAM initialization routines for the
30910 405 SDRAM controller and the 440 DDR controller don't have much in
30911 common this patch splits both drivers into different files.
30913 This is in preparation for the 440 DDR2 controller support (440SP/e).
30917 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
30919 Date: Tue Feb 20 10:27:08 2007 +0100
30921 [PATCH] PPC4xx: Add support for multiple I2C busses
30923 This patch adds support for multiple I2C busses on the PPC4xx
30924 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
30925 to make use of this feature.
30927 It also merges the 405 and 440 i2c header files into one common
30930 Also the 4xx i2c reset procedure is reworked since I experienced
30931 some problems with the first access on the 440SPe Katmai board.
30935 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
30937 Date: Tue Feb 20 09:05:45 2007 +0100
30939 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
30941 Block device read/write is anonymous data; there is no need to use a
30942 typed pointer. void * is fine. Also add a hook for block_read functions
30946 commit 53758fa20e935cc87eeb0519ed365df753a6f289
30948 Date: Tue Feb 20 09:05:38 2007 +0100
30950 [PATCH 8_9] Add block_write hook to block_dev_desc_t
30952 Preparation for future patches which support block device writing
30956 commit f4852ebe6ca946a509667eb68be42026f837be76
30958 Date: Tue Feb 20 09:05:31 2007 +0100
30960 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
30962 Register read/write does not need to be wrapped in a full function. The
30963 patch replaces them with macros.
30967 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
30969 Date: Tue Feb 20 09:05:23 2007 +0100
30971 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
30973 The code in this file is not a command; it is a device driver. Put it in
30974 the correct place. There are zero functional changes in this patch, it
30975 only moves the file.
30979 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
30981 Date: Tue Feb 20 09:05:16 2007 +0100
30983 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
30985 This patch is in preparation of additional changes to the sysace driver.
30986 May as well take this opportunity to fixup the inconsistent whitespace since
30987 this file is about to undergo major changes anyway.
30989 There are zero functional changes in this patch. It only cleans up the
30994 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
30996 Date: Tue Feb 20 09:05:07 2007 +0100
30998 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
31000 isprint is already defined in ctype.c
31004 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
31006 Date: Tue Feb 20 09:05:00 2007 +0100
31008 [PATCH 3_9] Move buffer print code from md command to common function
31010 Printing a buffer is a darn useful thing. Move the buffer print code
31011 into print_buffer() in lib_generic/
31015 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
31017 Date: Tue Feb 20 09:04:52 2007 +0100
31019 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
31021 Change the xilinx device drivers and board code to include config.h
31022 instead of xparameters.h directly. config.h always includes the
31023 correct xparameters file. This change reduces the posibility of
31024 including the wrong file when adding a new xilinx board port
31028 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
31030 Date: Tue Feb 20 09:04:34 2007 +0100
31032 [PATCH 1_4] Merge common get_dev() routines for block devices
31034 Each of the filesystem drivers duplicate the get_dev routine. This change
31035 merges them into a single function in part.c
31039 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
31041 Date: Mon Feb 19 23:09:51 2007 +0100
31043 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
31044 as root file system images.
31046 commit 489c696ae7211218961d159e43e722d74c36fcbc
31048 Date: Wed Feb 14 14:30:28 2007 +0300
31050 MCC200: Extensions to Software Update Mechanism
31052 Update / extend Software Update Mechanism for MCC200 board:
31054 - Add support for rootfs image added. The environment variables
31055 "rootfs_st" and "rootfs_nd" can be used to override the default
31056 values of the image start and end.
31057 - Remove excessive key check code.
31060 commit 4be23a12f23f1372634edc3215137b09768b7949
31062 Date: Mon Feb 19 08:23:15 2007 +0100
31064 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
31066 As spotted by Matthias Fuchs, the READY input should not be
31067 enabled for the NOR FLASH on the Sequoia board.
31071 commit 2605e90bf676d48123afe5719a846d2b52b24aac
31073 Date: Fri Feb 16 07:57:42 2007 +0100
31075 [PATCH] Added support for the jupiter board.
31079 commit 497d012e5be0194e1084073d0081eb1a844796b2
31081 Date: Mon Feb 12 13:11:50 2007 +0100
31083 LPC2292: patch from Siemens.
31085 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
31087 Date: Sat Feb 10 08:49:31 2007 +0100
31089 [PATCH] Add missing p3mx.h file to repository (ups)
31093 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
31095 Date: Fri Feb 9 10:45:42 2007 +0100
31097 [Motion-PRO] Preliminary support for the Motion-PRO board.
31099 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
31101 Date: Wed Feb 7 16:51:08 2007 +0100
31103 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
31105 Some boards that can have more than 768MBytes of SDRAM need to
31106 set "initrd_high", so that the initrd can be accessed by the
31111 commit 7372ca68227930d03cffa548310524cad5b96733
31113 Date: Fri Feb 2 12:44:22 2007 +0100
31115 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
31117 Previously the strapping DCR/SDR was read to determine if the internal PCI
31118 arbiter is enabled or not. This strapping bit can be overridden, so now
31119 the current status is read from the correct DCR/SDR register.
31123 commit 2aa54f651a42d198673318f07a20c89a43e4d197
31125 Date: Fri Feb 2 12:42:08 2007 +0100
31127 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
31131 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
31133 Date: Thu Feb 1 13:22:41 2007 +0100
31135 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
31137 When PCI PNP is enabled the pci pnp configuration routine is called
31138 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
31139 problems with some PCI cards. For now disable the PCI PNP configuration.
31143 commit 2902fadade3be7659467e8d074048c6b7068f5c0
31145 Date: Wed Jan 31 16:56:10 2007 +0100
31147 [PATCH] Update 440EPx/440GRx cpu detection
31151 commit d5ea287b02a6945c3977410e364a879dd1a555c8
31153 Date: Wed Jan 31 16:38:04 2007 +0100
31155 [PATCH] Update esd cpci5200 files
31159 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
31161 Date: Wed Jan 31 16:37:34 2007 +0100
31163 [PATCH] Add support for esd mecp5200 board
31167 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
31169 Date: Wed Jan 31 12:38:50 2007 +0100
31171 [PATCH] Remove unneccessary yellowstone board config file
31175 commit e802594b6fa1b166308820c276b96dc0d7cc731c
31177 Date: Tue Jan 30 17:06:10 2007 +0100
31179 [PATCH] Update Sequoia (440EPx) config file
31181 The config file now handles the 2nd target, the Rainier (440GRx)
31182 evaluation board better. Additionally the PPC input clock was
31183 adjusted to match the correct value of 33.0 MHz.
31187 commit 700200c67e73b83751418abe7815840dca8fd6cb
31189 Date: Tue Jan 30 17:04:19 2007 +0100
31191 [PATCH] Merge Yosemite & Yellowstone board ports
31193 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
31194 share one config file and all board specific files. This way we
31195 don't have to maintain two different sets of files for nearly
31200 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
31202 Date: Tue Jan 30 15:01:49 2007 +0100
31204 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
31206 SCPU doesn't use redundant environment in flash.
31210 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
31212 Date: Tue Jan 30 12:51:07 2007 +0100
31214 [PATCH] alpr: Update alpr board config file
31218 commit f8db84f132b1e335f20f96138a1f09ed97b08664
31220 Date: Tue Jan 30 00:50:40 2007 +0100
31222 LPC2292 SODIMM port coding style cleanup.
31224 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
31226 Date: Wed Jan 24 12:16:56 2007 +0100
31228 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
31230 commit 2daf046ba627f85f44195815778140039636244e
31232 Date: Tue Jan 23 17:22:06 2007 +0100
31234 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
31236 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
31238 Date: Tue Jan 23 14:21:14 2007 +0100
31240 [iDMR] Flash driver on initialisation write-protects some sectors,
31241 currently sectors 0-3. Sector 3 does not need to be protected, though
31242 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
31243 fixes this, i.e., only sectors 0-2 are protected.
31245 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
31247 Date: Tue Jan 23 14:11:22 2007 +0100
31249 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
31250 "mii device" results in "Unexpected exception"). Fixing this properly
31251 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
31252 this commit disables MII commads for now.
31254 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
31256 Date: Tue Jan 23 13:25:22 2007 +0100
31258 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
31259 Identification Register (CIR).
31261 commit fdef388758506765d4d6a7155c8f1584c63ff581
31263 Date: Mon Jan 22 13:19:21 2007 +0800
31265 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
31267 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
31270 commit a4012396645533aef218354eeba754dff0deace8
31272 Date: Fri Jan 19 23:08:39 2007 +0100
31274 Minor code cleanup.
31276 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
31278 Date: Fri Jan 19 19:57:10 2007 +0100
31280 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
31284 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
31286 Date: Fri Jan 19 18:05:26 2007 +0100
31288 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
31289 if you must swap the bytes between reading/writing.
31290 (Needed for the SC3 board)
31294 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
31296 Date: Thu Jan 18 16:05:47 2007 +0100
31298 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
31302 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
31304 Date: Thu Jan 18 11:54:52 2007 +0100
31306 [PATCH] Update Prodrive P3Mx support
31310 commit 34167a36c29ee946b727465db5c014746a08e978
31312 Date: Thu Jan 18 11:48:10 2007 +0100
31314 [PATCH] Add missing Taishan config file
31318 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
31320 Date: Thu Jan 18 11:28:51 2007 +0100
31322 [PATCH] Fix: Compilerwarnings for SC3 board.
31323 The EBC Configuration Register is now by CFG_EBC_CFG definable
31324 Added JFFS2 support for the SC3 board.
31328 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
31330 Date: Thu Jan 18 10:25:34 2007 +0100
31332 [PATCH] Add support for AMCC Taishan PPC440GX eval board
31336 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
31338 Date: Tue Jan 16 18:30:50 2007 +0100
31340 Raname solidcard3 into sc3; add redundant env for sc3
31342 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
31344 Date: Tue Jan 16 12:46:35 2007 +0100
31346 Update default environment for Solidcard3
31348 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
31350 Date: Mon Jan 15 09:46:29 2007 +0100
31352 [PATCH] Fix 440SPe rev B detection from previous patch
31356 commit a443d31410c571ee8f970da819a44d698fdd6b1f
31358 Date: Sun Jan 14 13:35:31 2007 +0100
31360 [FIX] correct I2C Writes for the LM81 Sensor.
31364 commit 0bba5452835f19a61204edcda3a58112fd8e2208
31366 Date: Sat Jan 13 11:17:10 2007 +0100
31368 Undo commit 3033ebb2: reset command does not take any arguments
31370 Haiying Wang's modification to the reset command was broken, undo it.
31374 commit 95981778cff0038fd9941044d6a3eda810e33258
31376 Date: Sat Jan 13 08:01:03 2007 +0100
31378 [PATCH] Update 440SP(e) cpu revisions
31380 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
31384 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
31386 Date: Sat Jan 13 07:59:56 2007 +0100
31388 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
31390 Now the board revision and the current PCI bus speed are printed after
31393 Also the EBC initialising is now done via defines in the board config
31398 commit 36adff362c2c0141ff8a810d42a7e478f779130f
31400 Date: Sat Jan 13 07:59:19 2007 +0100
31402 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
31404 Now the board revision and the current PCI bus speed are printed after
31407 Also the EBC initialising is now done via defines in the board config
31412 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
31414 Date: Sat Jan 13 07:57:51 2007 +0100
31416 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
31418 Now the board revision and the current PCI bus speed are printed after
31423 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
31425 Date: Thu Jan 11 15:44:44 2007 +0100
31427 Added support for the SOLIDCARD III board from Eurodesign
31431 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
31433 Date: Wed Jan 10 14:41:14 2007 +0100
31435 Adjusted default environment for cam5200 board.
31437 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
31439 Date: Wed Jan 10 15:35:52 2007 +0100
31443 commit 787fa15860a57833e50bd30555079a9cd4e519b8
31445 Date: Wed Jan 10 01:28:39 2007 +0100
31447 Fix auto_update for MCC200 board.
31449 The invocation of do_auto_update() is moved to the end of the
31450 misc_init_r() function, after the flash mappings have been
31451 initialized. Please find attached a patch that implements that
31454 Also correct the decoding of the keypad status. With this update, the
31455 key that will trigger the update is Column 2, Row 2.
31457 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
31459 Date: Wed Jan 10 00:26:15 2007 +0100
31461 CAM5200 flash driver modifications:
31462 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
31463 - add second build target 'cam5200_niosflash' which still uses custom driver
31465 commit 67fea022fa957f59653b5238c7496f80a6b70432
31467 Date: Tue Jan 9 16:02:48 2007 +0100
31469 SPC1920: cleanup memory contoller setup
31471 commit 8fc2102faa23593c80381437c09f7745a14deb40
31473 Date: Tue Jan 9 14:57:14 2007 +0100
31475 Fix the cpu speed setup to work with all boards.
31477 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
31479 Date: Tue Jan 9 14:57:13 2007 +0100
31481 SPC1920: add support for the FM18L08 Ramtron FRAM
31483 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
31485 Date: Tue Jan 9 14:57:13 2007 +0100
31487 SPC1920: update the HPI register addresses to work with the second
31488 generation of hardware
31490 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
31492 Date: Tue Jan 9 14:57:13 2007 +0100
31494 Miscellanious spc1920 related cleanups
31496 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
31498 Date: Tue Jan 9 14:57:12 2007 +0100
31500 SPC1920 GO/NOGO led should be set to color red in U-Boot
31502 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
31504 Date: Tue Jan 9 14:57:12 2007 +0100
31506 Add support for the DS3231 RTC
31508 commit 8139567b60d678584b05f0718a681f2047c5e14f
31510 Date: Tue Jan 9 14:57:11 2007 +0100
31512 SMC1 uses external CLK4 instead of BRG on spc1920
31514 commit d8d9de1a02fbd880b613d607143d1f57342affc7
31516 Date: Tue Jan 9 14:57:10 2007 +0100
31518 Update the SPC1920 CMB PLD driver
31520 commit 3f34f869162750e5e999fd140f884f5de952bcfe
31522 Date: Tue Jan 9 14:57:10 2007 +0100
31524 Add / enable I2C support on the spc1920 board
31526 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
31528 Date: Tue Jan 9 14:57:10 2007 +0100
31530 Add support for the tms320671x host port interface (HPI)
31532 commit f4eb54529bb3664c3a562e488b460fe075f79d67
31534 Date: Sun Jan 7 00:13:11 2007 +0100
31536 Prepare for release 1.2.0
31538 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
31540 Date: Sat Jan 6 15:58:09 2007 +0100
31542 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
31544 This patch fixes a problem with an incorrect setup for the refresh
31545 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
31549 commit f16c1da9577f06c5fc08651a4065537407de4635
31551 Date: Sat Jan 6 15:56:13 2007 +0100
31553 [PATCH] Update ALPR board files
31555 This update brings the ALPR board support to the newest version.
31556 It also fixes a problem with the NAND driver.
31560 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
31562 Date: Fri Jan 5 11:46:05 2007 +0100
31564 [PATCH] nand: Fix problem with oobsize calculation
31568 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
31569 returns a 0x15. In the code fragment below bits [1:0] determine the
31570 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
31571 next field is also ANDed with 0x3. However this is a one bit field
31572 as defined in the Hynix and Samsung parts in the 4th ID byte that
31573 determins the oobsize, not a two bit field. It works on Samsung as
31574 bits[3:2] are 01. However for the Hynix there is a 11 in these two
31575 bits, so the oob size gets messed up.
31577 I checked the correct linux code and the suggested fix from Brian is
31578 also available in the linux nand mtd driver.
31582 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
31584 Date: Fri Jan 5 10:40:36 2007 +0100
31586 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
31588 This fix will make the MAL burst disabling patch for the Linux
31589 EMAC driver obsolete.
31593 commit 023889838282b6237b401664f22dd22dfba2c066
31595 Date: Fri Jan 5 10:38:05 2007 +0100
31597 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
31599 This code will optimize the DDR2 controller setup on a board specific
31602 Note: This code doesn't work right now on the NAND booting image for the
31603 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
31607 commit cce4acbb68398634b8d011ed7bb0d12269c84230
31609 Date: Thu Dec 28 19:08:21 2006 +0100
31612 - fix a typo in V38B config file
31613 - move watchdog initialisation earlier in the boot process
31614 - add "wdt=off" to default kernel command line (disables kernel watchdog)
31616 commit 92eb729bad876725aeea908d2addba0800620840
31618 Date: Wed Dec 27 01:26:13 2006 +0100
31620 Fix bug in adaption of Stefano Babic's CFI driver patch.
31622 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
31624 Date: Sun Dec 24 01:42:57 2006 +0100
31626 Minor code cleanup.
31628 commit d784fdb05900ada3686d5778783e1fb328e9fb66
31630 Date: Tue Dec 12 00:22:42 2006 +0100
31632 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
31634 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
31636 Date: Fri Dec 22 14:29:40 2006 +0100
31638 [PATCH] Fix sequoia flash autodetection (finally correct)
31640 Now 32MByte and 64MByte FLASH is know to work and other
31641 configurations should work too.
31645 commit 82e5236a8b719543643fd26d5827938ab2b94818
31647 Date: Fri Dec 22 10:30:26 2006 +0100
31649 Minor code cleanup; update CHANGELOG.
31651 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
31653 Date: Thu Dec 21 17:17:02 2006 +0100
31655 Added support for the TQM8272 board from TQ
31659 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
31661 Date: Thu Dec 21 16:14:48 2006 +0100
31663 [PATCH] Add support for the UC101 board from MAN.
31667 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
31669 Date: Wed Dec 20 00:29:43 2006 +0100
31671 Fix to make the baudrate changes immediate for the MCF52x2 family.
31673 commit daa6e418bcc0c717752e8de939c213c790286096
31675 Date: Wed Dec 20 00:27:32 2006 +0100
31677 Preliminary support for the iDMR board (ColdFire).
31679 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
31681 Date: Fri Dec 8 16:23:08 2006 +0100
31683 automatic update mechanism
31685 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
31687 Date: Mon Dec 4 17:56:59 2006 +0800
31689 Slight code clean up.
31690 Add comments, delete duplicate define and remove spaces.
31693 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
31695 Date: Mon Dec 4 17:54:21 2006 +0800
31697 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
31698 multiplier table can not refect the real PLL clock behavior of these
31699 processors. Please refer to the hardware specification for detailed
31700 information of the corresponding processors.
31703 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
31705 Date: Mon Dec 4 14:46:23 2006 +0800
31707 Remove the static MAC address, ip address, server ip, netmask and
31708 gateway ip for network setting.
31711 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
31713 Date: Mon Dec 4 14:33:08 2006 +0800
31715 Remove the duplicate memory test code for mpc744ihpc2 board.
31716 If a memory test is needed, please use the functions in
31717 post/memory.c or memtest command.
31720 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
31722 Date: Fri Dec 1 19:01:25 2006 +0800
31724 Fix the exception occuring in RAM table search issue.
31725 The original search_one_table() function code can only processes the search
31726 for the exception occurring in FLASH/ROM, because the exception and fixup
31727 table usually locate in FLASH. If the exception address is also in
31728 FLASH, it will be OK.
31729 If the exception occurs in RAM, after the u-boot relocation, a
31730 relocation offset should be added.
31732 clean up the code in cpu/74xx_7xx/cpu.c
31736 commit ee311214e0d216f904feea269599d0934bf71f23
31738 Date: Fri Dec 1 11:47:36 2006 +0800
31740 Clean up the code according to codestyle:
31741 (1) remove some C++ comments.
31742 (2) remove trailing white space.
31743 (3) remove trailing empty line.
31744 (4) Indentation by table.
31745 (5) remove {} in one line condition.
31746 (6) add space before '(' in function call.
31747 Remove some weird printf () output.
31748 Add necessary comments.
31749 Modified Makefile to support building in a separate directory.
31751 commit dd520bf314c7add4183c5191692180f576f96b60
31753 Date: Thu Nov 30 18:02:20 2006 +0100
31757 commit 8d9a8610b8256331132227e9e6585c6bd5742787
31759 Date: Thu Nov 30 01:54:07 2006 +0100
31761 Code cleanup. Update CHANGELOG.
31763 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
31765 Date: Wed Nov 29 16:23:42 2006 +0100
31767 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
31769 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
31770 not the XLB frequency.
31772 This patch depends on the previous patches for MPC52xx device tree support
31777 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
31779 Date: Wed Nov 29 15:42:37 2006 +0100
31781 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
31783 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
31784 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
31785 quite similar and share the same board directory "prodrive/p3mx"
31786 and the same config file "p3mx.h".
31790 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
31792 Date: Wed Nov 29 12:53:15 2006 +0100
31794 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
31796 In the bootvx command the load address was only read from the env
31797 variable "loadaddr" and not optionally passed as paramter as described
31798 in the help. This is fixed with this patch. The behaviour is now the
31799 same as in the bootelf command.
31803 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
31805 Date: Wed Nov 29 12:03:57 2006 +0100
31807 [PATCH] include/ppc440.h minor error affecting interrupts
31809 Fixed include/ppc440.c for UIC address Bug
31811 Corrects bug affecting the addresses for the universal interrupt
31812 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
31817 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
31819 Date: Tue Nov 28 16:17:27 2006 -0600
31821 Make fsl-i2c not conflict with SOFT I2C
31825 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
31827 Date: Tue Nov 28 16:17:18 2006 -0600
31829 Fix I2C master address initialization.
31833 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
31835 Date: Tue Nov 28 23:31:19 2006 -0600
31837 Assign maintainers for mpc8349emds and mpc8360emds
31839 Dave for mpc8360emds, and me for mpc8349emds.
31841 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
31843 Date: Tue Nov 28 23:28:33 2006 -0600
31845 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
31847 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
31848 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
31850 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
31852 Date: Tue Nov 28 12:09:35 2006 -0600
31854 mpc83xx: Miscellaneous code style fixes
31856 Implement various code style fixes and similar changes.
31860 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
31862 Date: Tue Nov 28 17:55:49 2006 +0100
31864 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
31866 This patch adds the code and configuration necessary to boot with an
31867 arch/powerpc Linux kernel.
31872 commit e732faec95a83cb468b4850ae807c8301dde8f6a
31874 Date: Tue Nov 28 16:09:24 2006 +0100
31876 [PATCH] PPC4xx: 440SP Rev. C detection added
31880 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
31882 Date: Tue Nov 28 11:04:45 2006 +0100
31884 [PATCH] nand: Fix patch merge problem
31888 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
31890 Date: Tue Nov 28 11:04:45 2006 +0100
31892 [PATCH] nand: Fix patch merge problem
31896 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
31898 Date: Mon Nov 27 22:53:53 2006 +0100
31902 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
31904 Date: Mon Nov 27 17:43:25 2006 +0100
31906 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
31908 Patch below corrects the setting of the zmiifer register, it was
31909 overwritting the register rather than ORing the settings.
31914 commit d1a72545296800b7e219f93104ad5836f0003d66
31916 Date: Mon Nov 27 17:34:10 2006 +0100
31918 [PATCH] Select NAND embedded environment from board configuration
31920 The current NAND Bootloader setup forces the environment
31921 variables to be in line with the bootloader. This change
31922 enables the configuration to be made in the board include
31923 file instead so that it can be individually enabled.
31928 commit 15784862857c3c2214498defcfed84ff137fb81e
31930 Date: Mon Nov 27 17:22:19 2006 +0100
31932 [PATCH] nand_wait() timeout fixes
31934 Two fixes for the nand_wait() function in
31935 drivers/nand/nand_base.c:
31937 1. Use correct timeouts. The original timeouts in Linux
31938 source are 400ms and 20ms not 40s and 20s
31940 2. Return correct error value in case of timeout. 0 is
31946 commit da5553b095bf04f4f109ad7e565dae3aba47b230
31948 Date: Mon Nov 27 17:04:06 2006 +0100
31950 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
31952 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
31953 arguments to bootm. It removes the getenv("disable_of") test that used
31954 to be used for this purpose.
31959 commit a9398e018593782c5fa7d0741955fc1256b34c1e
31961 Date: Mon Nov 27 15:32:42 2006 +0100
31963 Minor code cleanup. Update CHANGELOG.
31965 commit 1729b92cde575476684bffe819d0b7791b57bff2
31967 Date: Mon Nov 27 14:52:04 2006 +0100
31969 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
31973 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
31975 Date: Mon Nov 27 14:49:51 2006 +0100
31977 [PATCH] alpr: remove unused board specific flash driver
31981 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
31983 Date: Mon Nov 27 14:48:41 2006 +0100
31985 [PATCH] 4xx: Fix problem with board specific reset code
31989 commit ec0c2ec725aec9524a177a77ce75559e644a931a
31991 Date: Mon Nov 27 14:46:06 2006 +0100
31993 [PATCH] Remove testing 4xx enet PHY setup
31997 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
31999 Date: Mon Nov 27 14:12:17 2006 +0100
32001 [PATCH] Update Prodrive ALPR board support (440GX)
32005 commit 58b485776698c3d71ec5a215e392123b4c15afa3
32007 Date: Mon Nov 27 11:51:21 2006 +0100
32009 Add a small README with information on the generic ohci driver.
32011 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
32013 Date: Mon Nov 27 11:46:46 2006 +0100
32015 Fix some endianness issues related to the generic ohci driver
32017 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
32019 Date: Mon Nov 27 11:44:58 2006 +0100
32021 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
32022 to choose between the old and the generic OHCI drivers.
32024 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
32026 Date: Mon Nov 27 11:43:09 2006 +0100
32028 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
32029 and adapted board configs TQM5200 and yosemite accordingly. This commit
32030 also makes the maximum number of root hub ports configurable
32031 (CFG_USB_OHCI_MAX_ROOT_PORTS).
32033 commit 78d620ebb5871d252270dedfad60c6568993b780
32035 Date: Thu Nov 23 22:58:58 2006 +0100
32037 Updates for TQM5200 modules:
32038 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
32039 - simplify "udate" definitions
32041 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
32043 Date: Wed Nov 22 13:20:50 2006 +0100
32045 [PATCH] PPC4xx start.S: Fix for processor errata
32047 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
32048 errata 1.12: 440_33 by moving patch up in code.
32053 commit 4ef6251403f637841000e0fef9e832aa01339822
32055 Date: Mon Nov 20 20:39:52 2006 +0100
32057 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
32061 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
32063 Date: Mon Nov 20 10:28:30 2006 +0100
32067 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
32069 Date: Mon Nov 13 13:55:24 2006 +0100
32071 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
32073 * Adds support for AMD command set Top Boot flash geometry reversal
32074 * Adds support for reading JEDEC Manufacturer ID and Device ID
32075 * Adds support for displaying command set, manufacturer id and
32076 device ids (flinfo)
32077 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
32078 * Removes outdated change history (refer to git log instead)
32083 commit b21b511d4c50408f4853f46f06b601272196223f
32085 Date: Sun Nov 12 21:13:23 2006 +0100
32089 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
32091 Date: Sat Nov 11 22:48:22 2006 +0100
32093 Disable the watchdog in the default config for the V38B board.
32095 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
32097 Date: Sat Nov 11 22:43:00 2006 +0100
32099 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
32100 group is enabled for USB earlier (in cpu_init_f() instead of
32101 usb_lowlevel_init()).
32103 commit 91650b3e4de688038d4f71279c44858e3e2c6870
32105 Date: Mon Nov 6 17:06:36 2006 +0100
32107 Sequential accesses to non-existent memory must be synchronized,
32108 at least on G2 cores.
32110 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
32112 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
32114 Date: Fri Nov 3 19:15:00 2006 -0600
32116 mpc83xx: Update 83xx to use fsl_i2c.c
32118 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
32119 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
32120 Added multiple I2C bus support to fsl_i2c.c.
32124 commit d239d74b1c937984bc519083a8e7de373a390f06
32126 Date: Fri Nov 3 12:00:28 2006 -0600
32128 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
32130 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
32131 tree matches the other 8xxx trees.
32135 commit f7fb2e703ec9688541416962724adff70a7322cb
32137 Date: Thu Nov 2 19:47:11 2006 -0600
32139 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
32141 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
32143 Date: Thu Nov 2 18:05:50 2006 -0600
32145 mpc83xx: Fix the incorrect dcbz operation
32147 The 834x rev1.x silicon has one CPU5 errata.
32149 The issue is when the data cache locked with
32150 HID0[DLOCK], the dcbz instruction looks like no-op inst.
32152 The right behavior of the data cache is when the data cache
32153 Locked with HID0[DLOCK], the dcbz instruction allocates
32156 The 834x rev3.0 and later and 8360 have not this bug inside.
32158 So, when 834x rev3.0/8360 are working with ECC, the dcbz
32159 instruction will corrupt the stack in cache, the processor will
32162 However, the 834x rev1.x can work with ECC with these code,
32163 because the sillicon has this cache bug. The dcbz will not
32164 corrupt the stack in cache.
32165 Really, it is the fault code running on fault sillicon.
32167 This patch fix the incorrect dcbz operation. Instead of
32168 CPU FP writing to initialise the ECC.
32171 * Fix the incorrect dcbz operation instead of CPU FP
32172 writing to initialise the ECC memory. Otherwise, it
32173 will corrupt the stack in cache, The processor will checkstop
32178 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
32180 Date: Wed Nov 1 00:10:40 2006 -0600
32182 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
32184 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
32185 STDOUT_PATH configuration bits to mpc8349emds,
32186 mpc8349itx, and mpc8360emds board code.
32188 redo environment to use bootm with the fdtaddr
32189 for booting ARCH=powerpc kernels by default,
32190 and provide default fdtaddr values.
32192 commit 48041365b3420589ad464ebc7752e0053538b729
32194 Date: Wed Nov 1 00:07:25 2006 -0600
32196 mpc83xx: change ft code to modify local-mac-address property
32198 Update 83xx OF code to update local-mac-address properties
32199 for ethernet instead of the obsolete 'address' property.
32201 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
32203 Date: Tue Oct 31 21:23:16 2006 -0600
32205 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
32207 This patch also adds an improved I2C set_speed(), which handles all clock
32212 commit ac4b5622ce050b5ee1e154b98df630d778661632
32214 Date: Tue Oct 31 19:54:59 2006 -0600
32216 mpc83xx: add the README.mpc8360emds
32218 add doc/README.mpc8360emds to accompany the new board support
32220 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
32222 Date: Fri Nov 3 12:11:15 2006 -0600
32224 mpc83xx: add QE ethernet support
32226 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
32228 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
32230 Date: Fri Nov 3 19:33:44 2006 -0600
32232 mpc83xx: Add MPC8360EMDS basic board support
32234 Add support for the Freescale MPC8360EMDS board.
32235 Includes DDR, DUART, Local Bus, PCI.
32237 commit 23892e49352de74f7fac36ff90bb1be143d195e3
32239 Date: Tue Oct 31 19:30:40 2006 -0600
32241 mpc83xx: add the QUICC Engine (QE) immap file
32243 common QE immap file. Also required for 8360.
32245 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
32247 Date: Tue Oct 31 19:25:38 2006 -0600
32249 mpc83xx: Add 8360 specifics to 83xx immap
32251 Mainly add QE device dependencies, with appropriate 8360 protection.
32254 commit 988833324a7fda482c8ac3ca23eb539f8232e404
32256 Date: Tue Oct 31 19:14:41 2006 -0600
32258 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
32260 PREREQUISITE PATCHES:
32262 * This patch can only be applied after the following patches have been applied:
32264 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
32265 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
32269 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
32270 the clock for the 2nd USB board (Linux kernel will hang otherwise),
32271 and fix the CONFIG_BOOTARGS macro.
32275 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
32277 Date: Tue Oct 31 18:44:42 2006 -0600
32279 mpc83xx: Add support for the MPC8349E-mITX
32281 PREREQUISITE PATCHES:
32283 * This patch can only be applied after the following patches have been applied:
32285 1) DNX#2006090742000024 "Add support for multiple I2C buses"
32286 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
32287 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
32288 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
32289 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
32293 * Add support for the Freescale MPC8349E-mITX reference design platform.
32294 The second TSEC (Vitesse 7385 switch) is not supported at this time.
32298 commit 183da6d9b446cc12123455844ad1187e2375626f
32300 Date: Tue Sep 12 10:15:53 2006 -0400
32302 Additional MPC8349 support for multibus i2c
32306 Here is a patch for a file that was accidentally left out of a previous
32309 It accompanies the patch with ticket DNX#2006090742000024
32312 Change PCI initialization to use new multi-bus I2C API.
32317 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
32319 Date: Thu Sep 7 16:51:04 2006 -0400
32321 Multi-bus I2C implementation of MPC834x
32325 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
32326 family and the MPC8349EMDS board in particular.
32327 This patch requires Patch 1 (Add support for multiple I2C buses).
32328 Testing was performed on a 533MHz board.
32330 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
32335 Implemented driver-level code to support two I2C buses on the
32336 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
32337 are 50kHz, 100kHz and 400kHz on each bus.
32342 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
32344 Date: Thu Sep 7 16:50:54 2006 -0400
32346 Add support for multiple I2C buses
32350 Attached is a patch providing support for multiple I2C buses at the
32351 command level. The second part of the patch includes an implementation
32352 for the MPC834x CPU and MPC8349EMDS board.
32354 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
32360 1. Include new 'i2c' command (based on USB implementation) using
32361 CONFIG_I2C_CMD_TREE.
32363 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
32364 the commands to change bus number and speed are only available under the
32365 new 'i2c' command mentioned in the first bullet.
32367 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
32368 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
32369 of an array of bus-device pairs. Otherwise, it is an array of uchar.
32372 Added new 'i2c' master command for all I2C interaction. This is
32373 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
32374 setting I2C bus speed as well as changing the active bus if the board
32375 has more than one (conditionally compiled with
32376 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
32382 commit bed85caf872714ebf53013967a695c9d63acfc68
32384 Date: Tue Oct 31 18:13:36 2006 -0600
32386 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
32390 * Errata DDR6, which affects all current MPC 834x processors, lists changes
32391 required to maintain compatibility with various types of DDR memory. This
32392 patch implements those changes.
32396 commit afd6e470f639883002c7c59d562690a5cb0f4865
32398 Date: Wed Oct 25 18:45:23 2006 -0500
32400 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
32402 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
32404 Date: Tue Aug 22 17:07:00 2006 -0500
32406 mpc83xx: Add support for variable flash memory sizes on 83xx systems
32410 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
32411 window registers, instead of using a hard-coded value of 8MB.
32415 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
32417 Date: Thu Aug 3 18:38:13 2006 +0800
32419 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
32421 Unified TQM834x variable names with 83xx and consolidated macro
32422 in preparation for the 8360 and other upcoming 83xx devices.
32426 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
32428 Date: Wed Oct 25 14:41:21 2006 -0500
32430 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
32432 Incorporated the common unified variable names and the changes in preparation
32433 for releasing mpc8360 patches.
32437 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
32439 Date: Thu Aug 3 18:36:02 2006 +0800
32441 mpc83xx: Fix missing build for mpc8349emds pci.c
32443 Make pci build for mpc8349emds
32447 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
32449 Date: Thu Aug 3 18:39:49 2006 +0800
32451 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
32453 Removed unused file resetvec.S for mpc83xx cpu
32457 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
32459 Date: Sat Sep 30 00:32:59 2006 -0700
32461 NAND Flash verify across block boundaries
32463 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
32465 and the write crosses a block boundary. The pointer to the verification
32466 buffer (bufstart) is not being updated to reflect the starting of the
32468 block so the verification of the second block fails.
32472 * Fix NAND FLASH page verification across block boundaries
32474 commit f484dc791a3932537213c43c654cc1295c64b84c
32476 Date: Thu Sep 7 07:39:46 2006 -0700
32478 Added RGMII support to the TSECs and Marvell 881111 Phy
32480 Added a phy initialization to adjust the RGMII RX and TX timing
32481 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
32485 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
32487 Date: Fri Nov 3 13:10:00 2006 +0800
32489 Remove some unused CFG define.
32490 undef CFG_DRAM_TEST
32492 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
32494 Date: Fri Nov 3 13:07:36 2006 +0800
32496 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
32497 Both work. 0xFF000000 seems more reasonable.
32499 commit c59200443072353044aa4bf737a5a60f9a9af231
32501 Date: Thu Nov 2 15:15:01 2006 +0100
32503 Release U-Boot 1.1.6
32505 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
32507 Date: Thu Nov 2 19:14:48 2006 +0800
32509 This patch comes from Yuli's posted patch on 8/8/2006
32510 titled "CFI Driver Little-Endian write Issue".
32512 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
32514 If that patch applied, please discard this one.
32515 Until now , I do not see his patch is applied. So please apply this one.
32520 commit b825f158e449e1e9cf74c08e572955e122394c96
32522 Date: Thu Nov 2 19:12:31 2006 +0800
32524 Tsi108 on chip i2c support.
32526 The i2c Interface provides a master-only, serial interface that can be
32527 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
32533 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
32535 Date: Thu Nov 2 19:11:06 2006 +0800
32537 Tsi108 on chip pci controller support.
32539 If there is no pci card, the tsi108/109 pci configure read will
32540 cause a machine check exception to the processor. PCI error should
32541 also be cleared after the read.
32546 commit d1927cee977126e547ceeba23e4f978f377cfb8f
32548 Date: Thu Nov 2 19:08:55 2006 +0800
32550 Tundra tsi108 on chip Ethernet controller support.
32552 The following is a brief description of the Ethernet controller:
32553 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
32554 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
32555 to manage the two physical connection devices (PHYs). Each Ethernet port
32556 has its own statistics monitor that tracks and reports key interface
32557 statistics. Each port supports a 256-entry hash table for address
32558 filtering. In addition, each port is bridged to the Switch Fabric
32559 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
32561 Each Ethernet port also has a pair of internal Ethernet DMA channels to
32562 support the transmit and receive data flows. The Ethernet DMA channels
32563 use descriptors set up in memory, the memory map of the device, and
32564 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
32565 handles arbitration for the Switch Fabric. The Controller also
32566 has a register businterface for register accesses and status monitor
32569 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
32570 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
32571 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
32572 data flows to and from the Ethernet Controller through the Switch Fabric.
32574 Each Ethernet port uses its transmit and receive DMA channels to manage
32575 data flows through buffer descriptors that are predefined by the
32576 system (the descriptors can exist anywhere in the system memory map).
32577 These descriptors are data structures that point to buffers filled
32578 with data ready to transmit over Ethernet, or they point to empty
32579 buffers ready to receive data from Ethernet.
32584 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
32586 Date: Thu Nov 2 19:01:33 2006 +0800
32588 Tundra tsi108 header file.
32590 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
32591 PowerPC processors that offers numerous system interconnect options for
32592 embedded application designers. The Tsi108 can interconnect 60x or
32593 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
32594 and Flash. Provided the macro define for tsi108 chip.
32599 commit 87c4db09699c6b89176b31004afcb83eb1585d47
32601 Date: Thu Nov 2 18:59:15 2006 +0800
32603 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
32604 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
32609 commit 27801b8ab11c61b577e45742a515bb3b23b80241
32611 Date: Thu Nov 2 18:57:21 2006 +0800
32613 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
32614 Make ,config.mk and link file for the mpc7448hpc2 board.
32619 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
32621 Date: Thu Nov 2 18:55:04 2006 +0800
32623 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
32624 The mpc7448hpc2 board support header file.
32629 commit 625bb5ddb50b243f931262ca8c46956409471917
32631 Date: Thu Nov 2 18:52:21 2006 +0800
32633 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
32634 The mpc7448hpc2 board support low level assemble language init code.
32639 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
32641 Date: Thu Nov 2 18:49:51 2006 +0800
32643 General code modification for mpc7448hpc2 board support.
32644 1. Add 7447A and 7448 processor support.
32645 2. Add the following flags.
32647 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
32648 (such as by switch on board), this flag should be set.
32650 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
32651 relocates to RAM, this flag should be set.
32653 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
32654 system hang in exception, this flag should be set.
32656 There is a design issue for tsi108/109 pci configure read. When pci scan
32657 the slots, if there is no pci card, the tsi108/9 will cause a machine
32658 check exception for mpc7448 processor.
32663 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
32665 Date: Thu Nov 2 18:34:47 2006 +0800
32667 Add README file for mpc7448hpc2 board.
32670 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
32672 Date: Wed Nov 1 02:04:38 2006 +0100
32674 Finish up support for MarelV38B board
32675 - add watchdog support
32676 - enable GPIO_WKUP_7 pin for input
32679 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
32681 Date: Wed Nov 1 01:45:46 2006 +0100
32683 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
32684 * remove warnings when compiling ethaddr.c
32685 * adjust linker script (fixes a crash resulting from incorrect
32686 definition of __u_boot_cmd_start)
32687 - Some MarelV38B code cleanup.
32689 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
32691 Date: Wed Nov 1 01:38:16 2006 +0100
32693 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
32694 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
32695 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
32696 MPC5XXX_WU_GPIO_DATA_O for affected boards.
32698 - Add defintions for some MPC5XXX GPIO pins.
32700 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
32702 Date: Wed Nov 1 01:34:29 2006 +0100
32704 Changed MarelV38B board make target to lowercase. Config file cleanup.
32706 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
32708 Date: Sun Oct 29 01:03:51 2006 +0200
32710 Automatically adjust ARFLAGS so "make -s" is really silent.
32712 commit fae684e89844856383bdf101440889557df3e6b1
32714 Date: Sat Oct 28 16:45:00 2006 +0200
32716 [PATCH] omap925.c: Remove unused functions
32721 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
32723 Date: Sat Oct 28 17:12:58 2006 +0200
32725 [PATCH] Add some missing machtypes for netstar & voiceblue boards
32727 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
32733 commit 856f054410cef52d868feb330168b2a4c4091328
32735 Date: Sat Oct 28 15:55:52 2006 +0200
32737 [PATCH] NAND: Partition name support added to NAND subsystem
32739 chpart, nboot and NAND subsystem related commands now accept also partition
32740 name to specify offset.
32745 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
32747 Date: Sat Oct 28 02:29:44 2006 +0200
32751 commit 2751a95abd1b96911081c357e96a12fa97b40dee
32753 Date: Sat Oct 28 02:29:14 2006 +0200
32755 Enable commandline editing and hush shell on all TQM boards.
32757 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
32759 Date: Sat Oct 28 02:28:02 2006 +0200
32761 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
32763 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
32765 Date: Sat Oct 28 01:14:32 2006 +0200
32767 Check for illegal character '=' in environment variable names.
32769 Make sure the string passed as variable name does not contain a '='
32770 character. This not only prevents the common error or typing
32771 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
32772 also closes a backdoor which allowed to delete write-protected
32773 environment variables, for example by using "setenv ethaddr=".
32775 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
32777 Date: Sat Oct 28 00:38:39 2006 +0200
32779 Minor code cleanup.
32781 commit e11887a77d81077416a2d1c5e0354916fee8c034
32783 Date: Thu Oct 26 17:55:31 2006 +0200
32785 Don't pass any debug options directly to the assembler
32787 When passing the -g option to gcc, gcc automatically selects a
32788 suitable --g<format> option to pass on to the assembler.
32789 Thus, there's no point in forcing a specific debug option on the
32790 assembler using the -Wa mechanism.
32794 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
32796 Date: Fri Oct 27 07:47:22 2006 -0500
32798 MPC86xx: Cleaned up unused and conditionally used local variables.
32802 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
32804 Date: Fri Oct 27 11:55:21 2006 +0200
32806 Fix "ar" flags in some Makefiles to allow for silent "make -s"
32808 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
32810 Date: Thu Oct 26 14:38:25 2006 -0400
32812 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
32813 to a TSEC (e.g. a switch is connected via RMII) or
32814 if the PHY is defective/incorrectly configured.
32818 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
32820 Date: Thu Oct 26 14:38:25 2006 -0400
32822 Fix TSEC driver: avoid crashes if PHY is not attached
32823 to a TSEC (e.g. a switch is connected via RMII) or
32824 if the PHY is defective/incorrectly configured.
32828 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
32830 Date: Thu Oct 26 16:24:31 2006 +0200
32834 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
32836 Date: Wed Oct 25 15:48:59 2006 +0200
32838 Finish up support for the ATSTK1000/ATSTK1002 boards
32840 Add atstk1002_config target to Makefile and move the AVR32 section
32841 down below Blackfin so that it doesn't end up in the middle of
32844 Drop the autogenerated linker script thing for now. Will have to
32845 revisit how to handle chips with different flash and RAM layout
32850 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
32852 Date: Tue Oct 24 23:47:37 2006 -0500
32854 Added support for Multi-Image files that contain a device tree
32856 If a Multi-Image file contains a third image we try to use it as a
32857 device tree. The device tree image is assumed to be uncompressed in the
32858 image file. We automatically allocate space for the device tree in memory
32859 and provide an 8k pad to allow more than a reasonable amount of growth.
32861 Additionally, a device tree that was contained in flash will now automatically
32862 get copied to system memory as part of boot. Previously an error was
32863 reported if one tried to boot a device tree that was in flash.
32867 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
32869 Date: Tue Oct 24 21:35:55 2006 +0200
32871 Switch to automatically generated CHANGELOG file.
32872 (use "make CHANGELOG" to update it from time to time)
32874 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
32876 Date: Tue Oct 24 18:06:48 2006 +0200
32878 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
32879 Patch by Stefan Roese, 24 Oct 2006
32881 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
32883 Date: Tue Oct 24 17:24:55 2006 +0200
32885 Merge with /home/wd/git/u-boot/master
32887 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
32889 Date: Tue Oct 24 15:32:57 2006 +0200
32893 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
32895 Date: Tue Oct 24 14:51:36 2006 +0200
32897 Move atstk1000 files into vendor specific directory.
32898 Patch by Haavard Skinnemoen, 12 Sep 2006
32900 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
32902 Date: Tue Oct 24 14:42:37 2006 +0200
32904 Add ATSTK1000 and ATSTK1002 board support
32905 Patch by Haavard Skinnemoen, 06 Sep 2006
32907 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
32910 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
32911 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
32912 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
32913 CompactFlash cards. For more information, please see this page:
32915 http://www.atmel.com/dyn/products/tools.asp?family_id=682
32917 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
32922 commit f93ae788c3640fcde5db383471d45548ff4060d0
32924 Date: Tue Oct 24 14:31:24 2006 +0200
32926 Add common serial driver for Atmel AT32 and AT91 chips
32927 Patch by Haavard Skinnemoen, 06 Sep 2006
32929 This is a first attempt at creating a common serial driver for Atmel
32930 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
32931 be possible to support AT91RM9200 and other ARM-based chips with some
32932 minor modifications.
32934 There's nothing fundamentally AVR32-specific in this driver, but it
32935 does use some features which are currently only defined for the
32937 * pm_get_clock_freq: Obtain the clock frequency of a given domain
32938 * gd->console_uart: A "struct device" containing information about
32939 register mappings, gpio resources and clocks associated with the
32942 For more information about these features, please see the "AT32AP
32945 commit 72a087e04705c26cad982879ebd06b5281bf825a
32947 Date: Tue Oct 24 14:27:35 2006 +0200
32949 Add AT32AP CPU and AT32AP7000 SoC support
32950 Patch by Haavard Skinnemoen, 06 Sep 2006
32952 This patch adds support for the AT32AP CPU family and the AT32AP7000
32953 chip, which is the first chip implementing the AVR32 architecture.
32955 The AT32AP CPU core is a high-performance implementation featuring a
32956 7-stage pipeline, separate instruction- and data caches, and a MMU.
32957 For more information, please see the "AVR32 AP Technical Reference":
32959 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
32961 In addition to this, the AT32AP7000 chip comes with a large set of
32962 integrated peripherals, many of which are shared with the AT91 series
32963 of ARM-based microcontrollers from Atmel. Full data sheet is
32966 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
32970 commit 7b64fef33c66be648826c0ff9758298ef13d0604
32972 Date: Tue Oct 24 14:21:16 2006 +0200
32974 Add AVR32 architecture support
32975 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
32977 This patch adds common infrastructure code for the Atmel AVR32
32978 architecture. See doc/README.AVR32 for details.
32982 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
32984 Date: Tue Oct 24 13:57:33 2006 +0200
32986 Use -g instead of -gstabs in AFLAGS_DEBUG
32987 Patch by Haavard Skinnemoen, 30 Aug 2006
32989 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
32990 matter what the target's preferred debugging format is. This patch
32991 simply replaces -gstabs with -g, so that the default debugging format
32992 for the architecture is used.
32994 commit 965829872169c2996023840d98e1d85ad148d629
32996 Date: Tue Oct 24 13:55:18 2006 +0200
32998 Fix/workaround broken dependency handling with make 3.81
32999 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
33001 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
33003 Date: Mon Oct 23 22:17:05 2006 +0200
33005 Fix sequoia separate object direcory building problems.
33007 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
33009 Date: Fri Oct 20 17:16:35 2006 -0500
33011 Use generic I2C register block on 85xx and 86xx.
33013 Replace private IMMAP I2C structures with generic reg block
33014 and allow 86xx to have multiple I2C device busses.
33018 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
33020 Date: Fri Oct 20 15:54:34 2006 -0500
33022 Fix compilation warnings on a few 85xx boards.
33026 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
33028 Date: Fri Oct 20 15:50:15 2006 -0500
33030 Converted all 85xx boards to use a common FSL I2C driver.
33031 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
33032 And removed hard i2c path from a few u-boot.lds scipts too.
33033 Minor whitespace cleanups along the way.
33037 commit 4d45f69e362b05892c9e92a7907e5820995612aa
33039 Date: Thu Oct 19 12:02:24 2006 -0500
33041 Rewrite a series of goto statements as a sequences of
33042 conditional expressions instead.
33044 Use consistent return code 0/-1 for good/bad indicators.
33046 Include one fewer file if the driver isn't used at all.
33050 commit 7237c033b02fe295880435f1eb80819a0c987532
33052 Date: Thu Oct 19 11:02:16 2006 -0500
33054 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
33056 in an effort to begin to unify the umpteen FSL I2C drivers that
33057 are all otherwise very similar.
33061 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
33063 Date: Thu Oct 19 11:33:52 2006 -0500
33065 * Fix a bunch of compiler warnings for gcc 4.0
33069 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
33071 Date: Tue Oct 17 06:14:31 2006 +0200
33073 Add monitor functions for indirect access to PPC440 DCR's
33074 Patch by Leonid Baryudin, 12 Oct 2006
33076 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
33078 Date: Fri Oct 13 16:47:53 2006 -0500
33080 Fixed leading whitespace issues.
33081 Removed spurious LAWAR thing.
33085 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
33087 Date: Thu Oct 12 10:42:36 2006 -0500
33089 Remove unneeded include files and local variable.
33093 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
33095 Date: Tue Oct 10 00:23:32 2006 -0600
33097 Fix possible uninitialized variable compiler warning.
33099 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
33100 do_bootm_linux() may be uninitialized. There is no possibility in the
33101 current code that len will get used uninitialized, but this fix follows
33102 the existing convention of setting both len and data to zero at the same
33107 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
33109 Date: Wed Oct 11 15:13:01 2006 -0500
33111 * Fix a bunch of compiler warnings for gcc 4.0
33115 commit bf651baa365e5447246aad6a633ccd667cf24a39
33117 Date: Wed Oct 11 10:10:43 2006 -0500
33119 Move "ar" flags to config.mk to allow for silent "make -s"
33121 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
33123 Date: Tue Oct 10 17:19:03 2006 -0500
33125 Coding style changes to remove local varible blocks
33126 and reformat a bit nicer.
33128 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
33130 Date: Tue Oct 10 17:16:04 2006 -0500
33132 Fix whitespace issues.
33134 commit 7b382b7125f2397cce63253df62f183e3dfa2770
33136 Date: Tue Oct 10 17:14:45 2006 -0500
33138 Fix whitespace issues.
33140 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
33142 Date: Tue Oct 10 17:06:53 2006 -0500
33144 Fix whitespace issues.
33146 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
33148 Date: Tue Oct 10 17:03:43 2006 -0500
33150 Ran lindent and cleaned up whitespace issues.
33151 Format for 80-columns too.
33153 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
33155 Date: Tue Oct 10 17:02:22 2006 -0500
33157 Fix whitespace and 80-col issues.
33159 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
33161 Date: Sat Oct 7 11:36:51 2006 +0200
33163 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
33164 Patch by Stefan Roese, 07 Oct 2006
33166 commit 5bc528fa4da751d472397b308137238a6465afd2
33168 Date: Sat Oct 7 11:35:25 2006 +0200
33170 Update ALPR code (NAND support working now)
33171 Patch by Stefan Roese, 07 Oct 2006
33173 commit 77d5034847d328753b80c46b83f960a14a26f40e
33175 Date: Sat Oct 7 11:33:03 2006 +0200
33177 Remove compile warnings in fpga code
33178 Patch by Stefan Roese, 07 Oct 2006
33180 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
33182 Date: Sat Oct 7 11:30:52 2006 +0200
33184 Add CONFIG_BOARD_RESET to configure board specific reset function
33185 Patch by Stefan Roese, 07 Oct 2006
33187 commit f55df18187e7a45cb73fec4370d12135e6691ae1
33189 Date: Fri Sep 29 08:23:12 2006 +0100
33191 Fix missing tCycle/modfreq calculation.
33195 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
33197 Date: Wed Sep 13 10:33:35 2006 -0500
33199 Updated config headers to add default FDT-based booting
33201 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
33203 Date: Wed Sep 13 10:34:18 2006 -0500
33205 Add support for eTSEC 3 & 4 on 8548 CDS
33207 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
33208 This will only work on rev 1.3 boards (but doesn't break older boards)
33209 * Cleaned up some comments to reflect the expanded role of tsec
33212 commit 084d648b109c8984f83674043c1a7fa3885ef801
33214 Date: Wed Sep 13 10:33:56 2006 -0500
33216 Added code to support 2.6.18 PCI changes in u-boot
33218 * Added code to swizzle the IRQ map for the PCI
33220 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
33222 Date: Tue Sep 19 09:34:10 2006 -0500
33224 Modified makefile for new build mechanism.
33228 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
33230 Date: Thu Sep 14 08:40:36 2006 -0500
33232 Handle 86xx SVR values according to the new Reference Manual.
33233 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
33234 by the byte in bits 16-23 instead.
33235 Thanks to Jason Jin for noticing.
33239 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
33241 Date: Mon Aug 28 14:25:31 2006 +0800
33243 Fixed an OF-tree off-by-one bug when adding a new property name.
33244 This bug will cause the kernel booting to pause a long time.
33247 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
33249 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
33251 Date: Tue Aug 29 11:05:09 2006 -0500
33253 Remove trailing empty lines.
33255 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
33257 Date: Tue Aug 29 09:48:49 2006 -0500
33259 Remove bogus msync and use volatile asm.
33261 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
33263 Date: Tue Aug 29 08:17:14 2006 -0500
33265 Add myself as maintainer for MPC8641HPCN.
33267 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
33269 Date: Mon Aug 28 14:25:31 2006 +0800
33271 Fixed an OF-tree off-by-one bug when adding a new property name.
33272 This bug will cause the kernel booting to pause a long time.
33276 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
33278 Date: Fri Aug 25 14:38:34 2006 -0400
33280 Change ramdiskaddr and dtbaddr
33281 Remove PEX fluff commands.
33286 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
33288 Date: Wed Aug 23 13:32:45 2006 -0500
33290 * Another small fix for booting with disable_of
33294 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
33296 Date: Wed Aug 23 11:04:43 2006 -0500
33298 Cleanup and lindent new AHCI driver.
33300 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
33302 Date: Wed Aug 23 19:15:12 2006 +0800
33304 Add AHCI define and sata support for MPC8641HPCN board.
33308 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
33310 Date: Wed Aug 23 19:10:44 2006 +0800
33312 Add AHCI support to u-boot
33314 Add AHCI support in u-boot, enable the sata disk controllers which
33315 following the AHCI protocol.
33319 commit d8ea2acf5f137cae99417df4f573d036ee384668
33321 Date: Wed Aug 23 17:54:32 2006 +0800
33323 Add dtb boot-up parameter to default boot commands.
33327 commit b93775c2036b99baa390ea425c4771895bbc63c4
33329 Date: Tue Aug 22 18:26:08 2006 -0500
33331 Cleanup even more poorly introduced whitespace.
33333 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
33335 Date: Tue Aug 22 18:07:00 2006 -0500
33337 Cleanup more poorly introduced whitespace.
33339 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
33341 Date: Tue Aug 22 17:54:05 2006 -0500
33343 Cleanup poorly introduced whitespace.
33345 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
33347 Date: Tue Aug 22 12:25:27 2006 -0500
33349 General indent and whitespace cleanups.
33351 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
33353 Date: Tue Aug 22 12:06:18 2006 -0500
33355 General indent and whitespace cleanups.
33357 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
33359 Date: Tue Aug 22 10:42:21 2006 -0500
33361 Cleanup compiler warnings.
33363 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
33365 Date: Tue Aug 22 09:31:59 2006 -0500
33367 Fix disable_of booting
33371 commit 87a449c8ac396420cb24260f717ea9e6faa82047
33373 Date: Tue Aug 22 09:23:55 2006 -0500
33375 Support for FDT in uImage format, error when using FDT from flash
33379 commit 75c299c38369d01addd5e054b8a16217b70f4a86
33381 Date: Tue Aug 15 15:12:55 2006 -0400
33383 Unlock cache before kernel starts up for MPC86xx
33385 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
33387 Date: Tue Aug 15 15:13:15 2006 -0400
33389 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
33391 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
33393 Date: Tue Aug 15 15:12:55 2006 -0400
33395 Unlock cache before kernel starts up for MPC86xx
33397 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
33399 Date: Tue Aug 15 15:13:15 2006 -0400
33401 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
33403 commit 86c8e17f25e972a7e272950a0735fad84e082b88
33405 Date: Wed Aug 16 13:59:47 2006 -0500
33407 * Fix disable_of booting
33411 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
33413 Date: Wed Aug 16 10:54:09 2006 -0500
33415 * Support for FDT in uImage format, error when using FDT from flash
33419 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
33421 Date: Tue Aug 15 14:22:35 2006 +0200
33423 Add initial support for the ALPR board from Prodrive
33424 NAND needs some additional testing
33425 Patch by Heiko Schocher, 15 Aug 2006
33427 commit f0ff4692ff3372dec55074a8eb444943ab095abb
33429 Date: Tue Aug 15 14:15:51 2006 +0200
33431 Add FPGA Altera Cyclone 2 support
33432 Patch by Heiko Schocher, 15 Aug 2006
33434 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
33436 Date: Mon Aug 14 15:33:38 2006 -0500
33438 Fix BAT0 to actually be cacheable, non-guarded as documented.
33442 commit 40bc83559db5745681909fd7382ae509567e116d
33444 Date: Wed Aug 9 15:32:16 2006 -0500
33446 Removed MPC8641HPCN DTS source file from build.
33447 It is no longer linked into U-Boot; its sources are
33448 now located in the kernel tree.
33452 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
33454 Date: Wed Jun 28 10:47:03 2006 -0500
33456 * Switched default PCI speed for 8540 ADS back to 33MHz
33458 * Added comments and a printf to warn that PCI-X won't
33460 Patch by Andy Fleming 17-Mar-2006
33464 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
33466 Date: Wed Jun 28 10:46:35 2006 -0500
33468 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
33472 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
33474 Date: Wed Jun 28 10:46:13 2006 -0500
33476 * Added VIA configuration table
33478 * Added support for PCI2 on CDS
33479 Patch by Andy Fleming 17-Mar-2006
33483 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
33485 Date: Wed Jun 28 10:45:41 2006 -0500
33487 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
33491 commit 97074ed9655309b64231bc2cee69fe85399f8055
33493 Date: Wed Jun 28 10:45:17 2006 -0500
33495 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
33499 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
33501 Date: Wed Jun 28 10:44:49 2006 -0500
33503 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
33507 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
33509 Date: Wed Jun 28 10:44:23 2006 -0500
33511 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
33515 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
33517 Date: Wed Jun 28 10:43:36 2006 -0500
33519 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
33523 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
33525 Date: Wed Jun 28 10:43:00 2006 -0500
33527 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
33529 commit 5498d90312aad9f6bdbf047986027c35b03cd163
33531 Date: Wed Jun 28 10:42:24 2006 -0500
33533 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
33535 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
33537 Date: Wed Jun 28 10:41:37 2006 -0500
33539 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
33541 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
33543 Date: Wed Aug 9 14:33:50 2006 +0100
33545 Add Rapidio support for the MPC8641HPCN
33549 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
33551 Date: Tue Aug 8 11:32:43 2006 +0100
33553 Fix caslat calculation
33557 commit 709d3073e74153278e7904a70819bbef7df50e1a
33559 Date: Thu Aug 3 16:17:56 2006 -0500
33561 Convert to mac-address in ethernet nodes.
33563 commit 71748af833ca1017edf1415be376366ff2937d17
33565 Date: Fri Jul 28 12:41:35 2006 -0400
33567 Correct the irq value of DUART2
33569 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
33571 Date: Fri Jul 28 12:41:41 2006 -0400
33573 Change the space size of PEX IO in README
33575 commit 239db37c94f7a92941c4465feceb867c609241c5
33577 Date: Fri Jul 28 12:41:18 2006 -0400
33579 Move get_board_sys_clk to board directory
33581 commit 492900b985439fbce1a118afde1e35def870db03
33583 Date: Fri Jul 28 09:03:54 2006 +0100
33585 Fix 8641HPCN pollution
33587 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
33589 Date: Fri Jul 28 08:16:06 2006 +0100
33591 Fix 8641HPCN timebase
33593 commit c86360b830f1eecd7a72208575dde4f57879faea
33595 Date: Fri Jul 28 00:01:34 2006 +0800
33597 Fixed OF device tree of mpc86xxhpcn board.
33599 The changes works in with kernel irq mapping rework.
33603 commit bea3f28d285942bf3f7ab339ce85178ded544225
33605 Date: Wed Jul 12 10:48:05 2006 -0400
33607 Add support for reading and writing mac addresses to or from ID EEPROM.
33609 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
33610 With attached patch, we can use command "mac/mac read/mac save/"
33611 to read and write EEPROM under u-boot prompt.
33613 U-boot will calculate the checksum of EEPROM while bootup,
33614 if it is right, then u-boot will check whether the mac address
33615 of eTSEC0/1/2/3 is availalbe (non-zero).
33617 If there is mac address availabe in EEPROM, u-boot will use it,
33618 otherewise, u-boot will use the mac address defined in
33619 MPC8641HPCN.h. This matches the requirement to set unique mac address
33620 for each TSEC port.
33625 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
33627 Date: Thu Jul 13 10:35:10 2006 -0500
33629 Fixed initrd issue by define big RAM
33633 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
33635 Date: Fri Jul 7 10:01:45 2006 -0500
33637 We made a u-boot patch to fix the hang up issue
33638 when booting filesystem from ramdisk.
33642 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
33644 Date: Wed Jun 28 10:47:03 2006 -0500
33646 * Switched default PCI speed for 8540 ADS back to 33MHz
33647 * Added comments and a printf to warn that PCI-X won't
33649 Patch by Andy Fleming 17-Mar-2006
33653 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
33655 Date: Wed Jun 28 10:46:35 2006 -0500
33657 * Fixed a bug where 8555 PCI code used the old variable and
33659 Patch by Andy Fleming 17-Mar-2006
33663 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
33665 Date: Wed Jun 28 10:46:13 2006 -0500
33667 * Added VIA configuration table
33668 * Added support for PCI2 on CDS
33669 Patch by Andy Fleming 17-Mar-2006
33673 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
33675 Date: Wed Jun 28 10:45:41 2006 -0500
33677 * Fixed PCI memory definitions
33678 Patch by Andy Fleming 17-Mar-2006
33682 commit 087454609e47295443af793a282cddcd91a5f49c
33684 Date: Wed Jun 28 10:45:17 2006 -0500
33686 * Added support for initializing second PCI bus on 85xx
33687 Patch by Andy Fleming 17-Mar-2006
33691 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
33693 Date: Wed Jun 28 10:44:49 2006 -0500
33695 * Added PCI-X #defines for PCI-X initialization
33696 Patch by Andy Fleming on 17-Mar-2006
33700 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
33702 Date: Wed Jun 28 10:44:23 2006 -0500
33704 * Made sure the code which disables prefetch for PCI devices
33705 sets the size of the prefetch region to 0
33706 Patch by Andy Fleming on 17-Mar-2006
33710 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
33712 Date: Wed Jun 28 10:43:36 2006 -0500
33714 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
33715 Patch by Jon Loeliger 17-Jan-2006
33719 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
33721 Date: Wed Jun 28 10:43:00 2006 -0500
33723 * Removed the oftree.dts for stxxtx in light of the changes
33724 to the flat device tree handling code
33725 Patch by Matthew McClintock 26-June-2006
33727 commit 1b380ec225665e73959677f3893dc658c5925e05
33729 Date: Wed Jun 28 10:42:24 2006 -0500
33731 * Patch to modify ft_build.c to update flat device trees in place
33732 Patch by Matthew McClintock 26-June-2006
33734 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
33736 Date: Wed Jun 28 10:41:37 2006 -0500
33738 * Modify bootm command to support booting with flat device trees
33739 Patch by Matthew McClintock 26-June-2006
33741 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
33743 Date: Wed Jun 28 08:43:56 2006 -0500
33745 Change Id to symbolic name for RTL8139
33749 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
33751 Date: Tue Jun 27 18:12:10 2006 +0800
33753 Fix RTL8139 in big endian
33758 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
33760 Date: Tue Jun 27 18:12:23 2006 +0800
33762 Fix Tsec bug when no link
33764 When tftp a non-exist file from the tftp server, u-boot will check
33765 the link of all eth port. The original file will return wrong link
33766 state on the no link ports.
33770 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
33772 Date: Tue Jun 27 18:12:02 2006 +0800
33774 Fix bug for io_bar size during pci scan
33776 During the pci scan process, Some devices return bar_reponse with the
33777 highest bytes 0, such as the pci bridge in uli1575 return bar_response
33778 with 0xffffff, So the bar_size should be manually set under 64K.
33782 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
33784 Date: Tue Jun 27 18:11:54 2006 +0800
33786 Enable PCIE1 for MPC8641HPCN board
33790 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
33792 Date: Mon Jun 26 11:06:00 2006 +0200
33796 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
33798 Date: Thu Jun 22 08:51:46 2006 -0500
33800 Fix bug in 8641hpcn reset command with no args.
33805 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
33807 Date: Tue Jun 20 17:47:15 2006 +0800
33809 Reworked IRQ mapping in OF-tree.
33811 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
33813 Date: Thu Jun 15 21:33:37 2006 -0500
33815 Do not enable address translation on secondary CPUs.
33816 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
33820 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
33822 Date: Wed Jun 14 18:14:56 2006 +0200
33826 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
33828 Date: Wed Jun 14 17:45:53 2006 +0200
33830 Various USB related patches
33831 - Add support for mpc8xx USB device.
33832 - Add support for Common Device Class - Abstract Control Model USB console.
33833 - Add support for flow control in USB slave devices.
33834 - Add support for switching between gserial and cdc_acm using environment.
33835 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
33836 - Update usbcore slightly to ease host enumeration.
33837 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
33838 - Add AdderUSB_config as a defconfig to enable usage of the USB console
33839 by default with the Adder87x U-Boot port.
33842 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
33844 Date: Wed Jun 7 10:53:55 2006 -0500
33846 Fix a get_board_sys_clk() use-before-def warning.
33850 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
33852 Date: Wed Jun 7 10:52:49 2006 -0500
33854 Allow DTC path to be passed in.
33858 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
33860 Date: Tue Jun 6 16:54:29 2006 -0400
33862 Modify the IRQ of DUART2
33864 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
33866 Date: Wed May 31 13:55:35 2006 -0500
33872 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
33874 Date: Wed May 31 12:44:44 2006 -0500
33876 White space cleanup.
33877 Some 80-column cleanups.
33878 Convert printf() to puts() where possible.
33879 Use #include "spd_sdram.h" as needed.
33880 Enhanced reset command usage message a bit.
33884 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
33886 Date: Wed May 31 11:39:34 2006 -0500
33888 Removed unneeded local_bus_init() from 8641HPCN board.
33892 commit 4d3d729c16c392d2982d3266b659d333c927697d
33894 Date: Wed May 31 11:24:28 2006 -0500
33896 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
33900 commit b2a941de060350ad15878d8219825f4950e9bb8e
33902 Date: Wed May 31 10:07:28 2006 -0500
33904 Remove dead debug code.
33908 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
33910 Date: Tue May 30 17:47:00 2006 -0500
33912 Move mpc86xx PIXIS code to board directory
33914 First cut at moving the PIXIS platform code out of
33915 the 86xx cpu directory and into board/mpc8641hpcn
33920 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
33922 Date: Tue May 30 16:56:14 2006 +0200
33924 Support generic OHCI support for the s3c24x0 cpu.
33926 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
33928 Date: Tue May 30 09:10:32 2006 -0500
33930 Improve "reset" command's interaction with watchdog.
33932 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
33933 "reset altbank wd" will reset another bank WITH watch dog enabled
33934 "diswd" will disable watch dog after u-boot boots up successfully
33938 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
33940 Date: Tue May 30 08:51:19 2006 -0500
33942 Fix two SDRAM setup bugs.
33945 Enable 1T/2T based on number of DIMMs present.
33949 commit d11fec5015334deb2010e36ce00bb118cc5429a5
33951 Date: Fri May 26 10:24:48 2006 -0500
33953 Add first draft of the MPC8641HPCN doc/README.
33957 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
33959 Date: Fri May 26 10:13:04 2006 -0500
33961 Added pci@8000 block.
33962 Updated ethernet interrupt mappings (moved up 48).
33963 Cleaned up a few comments.
33967 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
33969 Date: Fri May 26 10:01:16 2006 -0500
33971 Allow args on reset command.
33975 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
33977 Date: Tue May 23 13:38:35 2006 +0200
33979 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
33980 fixes to the latter.
33982 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
33984 Date: Tue May 23 10:33:11 2006 +0200
33986 More cleanup for the delta board and the generic usb_ohci driver. Added
33987 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
33988 initialization and cleanup hooks respectively.
33990 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
33992 Date: Mon May 22 16:33:54 2006 +0200
33994 This patch adds USB storage support for the delta board. This is the first
33995 board to make use of a generic OHCI driver, that calls hooks for board
33996 dependant initialization.
33998 commit 14e37081ff3cac7ebe6e93836523429853b6b292
34000 Date: Fri May 19 13:28:39 2006 -0500
34002 Change arbitration to round-robin for SMP linux.
34004 commit 9a655876e5995be80f49054e2509500e871e4d3a
34006 Date: Fri May 19 13:26:34 2006 -0500
34008 Enable dual DDR controllers and interleaving.
34010 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
34012 Date: Fri May 19 13:22:44 2006 -0500
34014 Update 86xx address map and LAWBARs.
34016 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
34018 Date: Fri May 19 13:14:15 2006 -0500
34020 Remove L2 Cache invalidate polling.
34022 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
34024 Date: Fri May 19 12:33:09 2006 -0500
34026 Enable 2nd CPU and I2C.
34028 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
34030 Date: Mon May 15 07:26:56 2006 -0500
34032 Update interrupt mapping.
34034 commit 6cfea33477b04b63ed47386ed1629529484c33ba
34036 Date: Wed May 10 09:38:06 2006 -0500
34038 Remove unneeded INIT_RAM_LOCK cache twiddling.
34039 Correctly tracks r29 as global data pointer now.
34043 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
34045 Date: Wed May 10 09:33:07 2006 -0500
34047 Remove unnecessary flash.c file.
34049 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
34051 Date: Tue May 9 08:23:49 2006 -0500
34053 Get MPC8641HPCN flash images working.
34055 Enable the CFI driver.
34056 Remove bogus LAWBAR7 cruft.
34057 Use correct TEXT_BASE, Fixup load script.
34058 Enable SPD EEPROM during DDR setup.
34059 Use generic RFC 1918 IP addresses by default.
34061 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
34063 Date: Thu Apr 27 10:15:16 2006 -0500
34065 Cleanup whitespaces and style issues.
34066 Removed //-style comments.
34067 Use 80-column lines.
34068 Remove trailing whitespace.
34069 Remove dead code and debug cruft.
34071 commit a2320a6bf8113a09544c42d160d10ac69d049a03
34073 Date: Thu Apr 27 08:22:39 2006 -0500
34075 Revert bad PCI prefetch limit change.
34077 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
34079 Date: Wed Apr 26 17:58:56 2006 -0500
34081 Initial support for MPC8641 HPCN board.