include/configs/nitrogen6x.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Boundary Devices Nitrogen6X
   5  * and Freescale i.MX6Q Sabre Lite boards.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "mx6_common.h"
  14
  15 #define CONFIG_MACH_TYPE        3769
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  19
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21 #define CONFIG_MISC_INIT_R
  22 #define CONFIG_USBD_HS
  23 #define CONFIG_USB_ETHER
  24 #define CONFIG_USB_ETH_CDC
  25 #define CONFIG_NETCONSOLE
  26
  27 #define CONFIG_MXC_UART
  28 #define CONFIG_MXC_UART_BASE           UART2_BASE
  29
  30 #define CONFIG_CMD_SF
  31 #ifdef CONFIG_CMD_SF
  32 #define CONFIG_MXC_SPI
  33 #define CONFIG_SF_DEFAULT_BUS  0
  34 #define CONFIG_SF_DEFAULT_CS   0
  35 #define CONFIG_SF_DEFAULT_SPEED 25000000
  36 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  37 #endif
  38
  39 /* I2C Configs */
  40 #define CONFIG_CMD_I2C
  41 #define CONFIG_SYS_I2C
  42 #define CONFIG_SYS_I2C_MXC
  43 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  44 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  45 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  46 #define CONFIG_SYS_I2C_SPEED            100000
  47 #define CONFIG_I2C_EDID
  48
  49 /* MMC Configs */
  50 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  51 #define CONFIG_SYS_FSL_USDHC_NUM       2
  52
  53 #ifdef CONFIG_MX6Q
  54 #define CONFIG_CMD_SATA
  55 #endif
  56
  57 /*
  58  * SATA Configs
  59  */
  60 #ifdef CONFIG_CMD_SATA
  61 #define CONFIG_DWC_AHSATA
  62 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  63 #define CONFIG_DWC_AHSATA_PORT_ID       0
  64 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  65 #define CONFIG_LBA48
  66 #define CONFIG_LIBATA
  67 #endif
  68
  69 #define CONFIG_CMD_PING
  70 #define CONFIG_CMD_DHCP
  71 #define CONFIG_CMD_MII
  72 #define CONFIG_FEC_MXC
  73 #define CONFIG_MII
  74 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  75 #define CONFIG_FEC_XCV_TYPE             RGMII
  76 #define CONFIG_ETHPRIME                 "FEC"
  77 #define CONFIG_FEC_MXC_PHYADDR          6
  78 #define CONFIG_PHYLIB
  79 #define CONFIG_PHY_MICREL
  80 #define CONFIG_PHY_MICREL_KSZ9021
  81
  82 /* USB Configs */
  83 #define CONFIG_CMD_USB
  84 #define CONFIG_USB_EHCI
  85 #define CONFIG_USB_EHCI_MX6
  86 #define CONFIG_USB_STORAGE
  87 #define CONFIG_USB_HOST_ETHER
  88 #define CONFIG_USB_ETHER_ASIX
  89 #define CONFIG_USB_ETHER_MCS7830
  90 #define CONFIG_USB_ETHER_SMSC95XX
  91 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  92 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  93 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  94 #define CONFIG_MXC_USB_FLAGS    0
  95 #define CONFIG_USB_KEYBOARD
  96 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  97
  98 /* Miscellaneous commands */
  99 #define CONFIG_CMD_BMODE
 100
 101 /* Framebuffer and LCD */
 102 #define CONFIG_VIDEO
 103 #define CONFIG_VIDEO_IPUV3
 104 #define CONFIG_CFB_CONSOLE
 105 #define CONFIG_VGA_AS_SINGLE_DEVICE
 106 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 107 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 108 #define CONFIG_VIDEO_BMP_RLE8
 109 #define CONFIG_SPLASH_SCREEN
 110 #define CONFIG_SPLASH_SCREEN_ALIGN
 111 #define CONFIG_VIDEO_BMP_GZIP
 112 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
 113 #define CONFIG_BMP_16BPP
 114 #define CONFIG_IPUV3_CLK 260000000
 115 #define CONFIG_CMD_HDMIDETECT
 116 #define CONFIG_CONSOLE_MUX
 117 #define CONFIG_IMX_HDMI
 118 #define CONFIG_IMX_VIDEO_SKIP
 119
 120 #define CONFIG_PREBOOT                 ""
 121
 122 #ifdef CONFIG_CMD_SATA
 123 #define CONFIG_DRIVE_SATA "sata "
 124 #else
 125 #define CONFIG_DRIVE_SATA
 126 #endif
 127
 128 #ifdef CONFIG_CMD_MMC
 129 #define CONFIG_DRIVE_MMC "mmc "
 130 #else
 131 #define CONFIG_DRIVE_MMC
 132 #endif
 133
 134 #ifdef CONFIG_USB_STORAGE
 135 #define CONFIG_DRIVE_USB "usb "
 136 #else
 137 #define CONFIG_DRIVE_USB
 138 #endif
 139
 140 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
 141 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 142
 143 #if defined(CONFIG_SABRELITE)
 144 #define CONFIG_EXTRA_ENV_SETTINGS \
 145         "script=boot.scr\0" \
 146         "uimage=uImage\0" \
 147         "console=ttymxc1\0" \
 148         "fdt_high=0xffffffff\0" \
 149         "initrd_high=0xffffffff\0" \
 150         "fdt_file=imx6q-sabrelite.dtb\0" \
 151         "fdt_addr=0x18000000\0" \
 152         "boot_fdt=try\0" \
 153         "ip_dyn=yes\0" \
 154         "mmcdevs=0 1\0" \
 155         "mmcpart=1\0" \
 156         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 157         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 158                 "root=${mmcroot}\0" \
 159         "loadbootscript=" \
 160                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 161         "bootscript=echo Running bootscript from mmc ...; " \
 162                 "source\0" \
 163         "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 164         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 165         "mmcboot=echo Booting from mmc ...; " \
 166                 "run mmcargs; " \
 167                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 168                         "if run loadfdt; then " \
 169                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 170                         "else " \
 171                                 "if test ${boot_fdt} = try; then " \
 172                                         "bootm; " \
 173                                 "else " \
 174                                         "echo WARN: Cannot load the DT; " \
 175                                 "fi; " \
 176                         "fi; " \
 177                 "else " \
 178                         "bootm; " \
 179                 "fi;\0" \
 180         "netargs=setenv bootargs console=${console},${baudrate} " \
 181                 "root=/dev/nfs " \
 182         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 183                 "netboot=echo Booting from net ...; " \
 184                 "run netargs; " \
 185                 "if test ${ip_dyn} = yes; then " \
 186                         "setenv get_cmd dhcp; " \
 187                 "else " \
 188                         "setenv get_cmd tftp; " \
 189                 "fi; " \
 190                 "${get_cmd} ${uimage}; " \
 191                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 192                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 193                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 194                         "else " \
 195                                 "if test ${boot_fdt} = try; then " \
 196                                         "bootm; " \
 197                                 "else " \
 198                                         "echo WARN: Cannot load the DT; " \
 199                                 "fi; " \
 200                         "fi; " \
 201                 "else " \
 202                         "bootm; " \
 203                 "fi;\0"
 204
 205 #define CONFIG_BOOTCOMMAND \
 206         "for mmcdev in ${mmcdevs}; do " \
 207                 "mmc dev ${mmcdev}; " \
 208                 "if mmc rescan; then " \
 209                         "if run loadbootscript; then " \
 210                                 "run bootscript; " \
 211                         "else " \
 212                                 "if run loaduimage; then " \
 213                                         "run mmcboot; " \
 214                                 "fi; " \
 215                         "fi; " \
 216                 "fi; " \
 217         "done; " \
 218         "run netboot; "
 219 #else
 220 #define CONFIG_EXTRA_ENV_SETTINGS \
 221         "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
 222         "umsdevs=" CONFIG_UMSDEVS "\0" \
 223         "console=ttymxc1\0" \
 224         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
 225                 "sf erase 0xc0000 0x2000 && " \
 226                 "echo restored environment to factory default ; fi\0" \
 227         "bootcmd=for dtype in ${bootdevs}" \
 228                 "; do " \
 229                         "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
 230                                 "usb start ;" \
 231                         "fi; " \
 232                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 233                                 "load " \
 234                                         "${dtype} ${disk}:1 " \
 235                                         "10008000 " \
 236                                         "/6x_bootscript" \
 237                                         "&& source 10008000 ; " \
 238                         "done ; " \
 239                 "done; " \
 240                 "setenv stdout serial,vga ; " \
 241                 "echo ; echo 6x_bootscript not found ; " \
 242                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
 243                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
 244                 "setenv stdout serial;" \
 245                 "setenv stdin serial,usbkbd;" \
 246                 "for dtype in ${umsdevs} ; do " \
 247                         "if itest.s sata == ${dtype}; then " \
 248                                 "initcmd='sata init' ;" \
 249                         "else " \
 250                                 "initcmd='mmc rescan' ;" \
 251                         "fi; " \
 252                         "for disk in 0 1 ; do " \
 253                                 "if $initcmd && $dtype dev $disk ; then " \
 254                                         "setenv stdout serial,vga; " \
 255                                         "echo expose ${dtype} ${disk} " \
 256                                                 "over USB; " \
 257                                         "ums 0 $dtype $disk ;" \
 258                                 "fi; " \
 259                 "       done; " \
 260                 "done ;" \
 261                 "setenv stdout serial,vga; " \
 262                 "echo no block devices found;" \
 263                 "\0" \
 264         "initrd_high=0xffffffff\0" \
 265         "upgradeu=for dtype in ${bootdevs}" \
 266                 "; do " \
 267                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 268                         "load ${dtype} ${disk}:1 10008000 " \
 269                                 "/6x_upgrade " \
 270                                 "&& source 10008000 ; " \
 271                 "done ; " \
 272         "done\0" \
 273
 274 #endif
 275 /* Miscellaneous configurable options */
 276 #define CONFIG_SYS_MEMTEST_START       0x10000000
 277 #define CONFIG_SYS_MEMTEST_END         0x10010000
 278 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 279
 280 /* Physical Memory Map */
 281 #define CONFIG_NR_DRAM_BANKS           1
 282 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 283
 284 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 285 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 286 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 287
 288 #define CONFIG_SYS_INIT_SP_OFFSET \
 289         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 290 #define CONFIG_SYS_INIT_SP_ADDR \
 291         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 292
 293 /* Environment organization */
 294 #define CONFIG_ENV_SIZE                 (8 * 1024)
 295
 296 #if defined(CONFIG_SABRELITE)
 297 #define CONFIG_ENV_IS_IN_MMC
 298 #else
 299 #define CONFIG_ENV_IS_IN_SPI_FLASH
 300 #endif
 301
 302 #if defined(CONFIG_ENV_IS_IN_MMC)
 303 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 304 #define CONFIG_SYS_MMC_ENV_DEV          0
 305 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 306 #define CONFIG_ENV_OFFSET               (768 * 1024)
 307 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
 308 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 309 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 310 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 311 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 312 #endif
 313
 314 #define CONFIG_CMD_BMP
 315
 316 #define CONFIG_CMD_TIME
 317 #define CONFIG_CMD_MEMTEST
 318 #define CONFIG_SYS_ALT_MEMTEST
 319
 320 /*
 321  * PCI express
 322  */
 323 #ifdef CONFIG_CMD_PCI
 324 #define CONFIG_PCI
 325 #define CONFIG_PCI_PNP
 326 #define CONFIG_PCI_SCAN_SHOW
 327 #define CONFIG_PCIE_IMX
 328 #endif
 329
 330
 331 #define CONFIG_CMD_USB_MASS_STORAGE
 332 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 333
 334 /* Netchip IDs */
 335 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 336 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 337 #define CONFIG_G_DNL_MANUFACTURER "Boundary"
 338
 339 #define CONFIG_USB_FUNCTION_FASTBOOT
 340 #define CONFIG_CMD_FASTBOOT
 341 #define CONFIG_ANDROID_BOOT_IMAGE
 342 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
 343 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
 344
 345 #endif         /* __CONFIG_H */