]> Git Repo - J-u-boot.git/blob - configs/at91sam9x5ek_mmc_defconfig
board: asus: tf600t: enable TEGRA20_SLINK only for TF600T
[J-u-boot.git] / configs / at91sam9x5ek_mmc_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT=y
3 CONFIG_ARCH_AT91=y
4 CONFIG_TEXT_BASE=0x26f00000
5 CONFIG_SYS_MALLOC_LEN=0x81000
6 CONFIG_TARGET_AT91SAM9X5EK=y
7 CONFIG_ATMEL_LEGACY=y
8 CONFIG_NR_DRAM_BANKS=1
9 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
10 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0
11 CONFIG_SF_DEFAULT_SPEED=30000000
12 CONFIG_ENV_SIZE=0x4000
13 CONFIG_DM_GPIO=y
14 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
15 CONFIG_SYS_MONITOR_LEN=524288
16 CONFIG_DEBUG_UART_BASE=0xfffff200
17 CONFIG_DEBUG_UART_CLOCK=132000000
18 CONFIG_DEBUG_UART_BOARD_INIT=y
19 CONFIG_SYS_LOAD_ADDR=0x22000000
20 CONFIG_DEBUG_UART=y
21 CONFIG_FIT=y
22 CONFIG_SD_BOOT=y
23 CONFIG_BOOTDELAY=3
24 CONFIG_USE_BOOTARGS=y
25 CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
26 CONFIG_SYS_CBSIZE=256
27 CONFIG_SYS_PBSIZE=281
28 # CONFIG_CONSOLE_MUX is not set
29 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
30 # CONFIG_DISPLAY_BOARDINFO is not set
31 CONFIG_HUSH_PARSER=y
32 CONFIG_SYS_PROMPT="U-Boot> "
33 CONFIG_CMD_BOOTZ=y
34 CONFIG_CMD_MMC=y
35 CONFIG_CMD_NAND=y
36 CONFIG_CMD_NAND_TRIMFFS=y
37 CONFIG_CMD_USB=y
38 # CONFIG_CMD_SETEXPR is not set
39 CONFIG_CMD_DHCP=y
40 CONFIG_BOOTP_BOOTFILESIZE=y
41 CONFIG_CMD_PING=y
42 CONFIG_CMD_FAT=y
43 CONFIG_CMD_MTDPARTS=y
44 CONFIG_CMD_UBI=y
45 CONFIG_OF_CONTROL=y
46 CONFIG_ENV_IS_IN_FAT=y
47 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
48 CONFIG_CLK=y
49 CONFIG_CLK_AT91=y
50 CONFIG_AT91_GPIO=y
51 CONFIG_GENERIC_ATMEL_MCI=y
52 CONFIG_MTD=y
53 CONFIG_MTD_RAW_NAND=y
54 CONFIG_NAND_ATMEL=y
55 CONFIG_ATMEL_NAND_HW_PMECC=y
56 CONFIG_DM_SPI_FLASH=y
57 CONFIG_SPI_FLASH_ATMEL=y
58 CONFIG_MACB=y
59 CONFIG_PINCTRL=y
60 CONFIG_PINCTRL_AT91=y
61 CONFIG_DM_SERIAL=y
62 CONFIG_DEBUG_UART_ANNOUNCE=y
63 CONFIG_ATMEL_USART=y
64 CONFIG_SPI=y
65 CONFIG_DM_SPI=y
66 CONFIG_TIMER=y
67 CONFIG_ATMEL_PIT_TIMER=y
68 CONFIG_USB=y
69 CONFIG_USB_EHCI_HCD=y
70 CONFIG_USB_STORAGE=y
71 CONFIG_VIDEO=y
72 # CONFIG_VIDEO_BPP8 is not set
73 # CONFIG_VIDEO_BPP32 is not set
74 CONFIG_ATMEL_HLCD=y
This page took 0.030699 seconds and 4 git commands to generate.