board/tqc/tqma6/tqma6.c

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  * Author: Fabio Estevam <[email protected]>
   4  *
   5  * Copyright (C) 2013, 2014 TQ Systems (ported SabreSD to TQMa6x)
   6  * Author: Markus Niebel <[email protected]>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <asm/arch/clock.h>
  12 #include <asm/arch/mx6-pins.h>
  13 #include <asm/arch/imx-regs.h>
  14 #include <asm/arch/iomux.h>
  15 #include <asm/arch/sys_proto.h>
  16 #include <asm/errno.h>
  17 #include <asm/gpio.h>
  18 #include <asm/io.h>
  19 #include <asm/imx-common/mxc_i2c.h>
  20 #include <asm/imx-common/spi.h>
  21 #include <common.h>
  22 #include <fsl_esdhc.h>
  23 #include <libfdt.h>
  24 #include <i2c.h>
  25 #include <mmc.h>
  26 #include <power/pfuze100_pmic.h>
  27 #include <power/pmic.h>
  28 #include <spi_flash.h>
  29
  30 #include "tqma6_bb.h"
  31
  32 DECLARE_GLOBAL_DATA_PTR;
  33
  34 #define USDHC_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW | \
  35         PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  36
  37 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW | \
  38         PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  39
  40 #define GPIO_OUT_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
  41         PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
  42
  43 #define GPIO_IN_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
  44         PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
  45
  46 #define SPI_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
  47         PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
  48
  49 #define I2C_PAD_CTRL    (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
  50         PAD_CTL_DSE_40ohm | PAD_CTL_HYS |                       \
  51         PAD_CTL_ODE | PAD_CTL_SRE_FAST)
  52
  53 int dram_init(void)
  54 {
  55         gd->ram_size = imx_ddr_size();
  56
  57         return 0;
  58 }
  59
  60 static const uint16_t tqma6_emmc_dsr = 0x0100;
  61
  62 /* eMMC on USDHCI3 always present */
  63 static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = {
  64         NEW_PAD_CTRL(MX6_PAD_SD3_CLK__SD3_CLK,          USDHC_PAD_CTRL),
  65         NEW_PAD_CTRL(MX6_PAD_SD3_CMD__SD3_CMD,          USDHC_PAD_CTRL),
  66         NEW_PAD_CTRL(MX6_PAD_SD3_DAT0__SD3_DATA0,       USDHC_PAD_CTRL),
  67         NEW_PAD_CTRL(MX6_PAD_SD3_DAT1__SD3_DATA1,       USDHC_PAD_CTRL),
  68         NEW_PAD_CTRL(MX6_PAD_SD3_DAT2__SD3_DATA2,       USDHC_PAD_CTRL),
  69         NEW_PAD_CTRL(MX6_PAD_SD3_DAT3__SD3_DATA3,       USDHC_PAD_CTRL),
  70         NEW_PAD_CTRL(MX6_PAD_SD3_DAT4__SD3_DATA4,       USDHC_PAD_CTRL),
  71         NEW_PAD_CTRL(MX6_PAD_SD3_DAT5__SD3_DATA5,       USDHC_PAD_CTRL),
  72         NEW_PAD_CTRL(MX6_PAD_SD3_DAT6__SD3_DATA6,       USDHC_PAD_CTRL),
  73         NEW_PAD_CTRL(MX6_PAD_SD3_DAT7__SD3_DATA7,       USDHC_PAD_CTRL),
  74         /* eMMC reset */
  75         NEW_PAD_CTRL(MX6_PAD_SD3_RST__SD3_RESET,        GPIO_OUT_PAD_CTRL),
  76 };
  77
  78 /*
  79  * According to board_mmc_init() the following map is done:
  80  * (U-Boot device node)    (Physical Port)
  81  * mmc0                    eMMC (SD3) on TQMa6
  82  * mmc1 .. n               optional slots used on baseboard
  83  */
  84 struct fsl_esdhc_cfg tqma6_usdhc_cfg = {
  85         .esdhc_base = USDHC3_BASE_ADDR,
  86         .max_bus_width = 8,
  87 };
  88
  89 int board_mmc_getcd(struct mmc *mmc)
  90 {
  91         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
  92         int ret = 0;
  93
  94         if (cfg->esdhc_base == USDHC3_BASE_ADDR)
  95                 /* eMMC/uSDHC3 is always present */
  96                 ret = 1;
  97         else
  98                 ret = tqma6_bb_board_mmc_getcd(mmc);
  99
 100         return ret;
 101 }
 102
 103 int board_mmc_getwp(struct mmc *mmc)
 104 {
 105         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 106         int ret = 0;
 107
 108         if (cfg->esdhc_base == USDHC3_BASE_ADDR)
 109                 /* eMMC/uSDHC3 is always present */
 110                 ret = 0;
 111         else
 112                 ret = tqma6_bb_board_mmc_getwp(mmc);
 113
 114         return ret;
 115 }
 116
 117 int board_mmc_init(bd_t *bis)
 118 {
 119         imx_iomux_v3_setup_multiple_pads(tqma6_usdhc3_pads,
 120                                          ARRAY_SIZE(tqma6_usdhc3_pads));
 121         tqma6_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 122         if (fsl_esdhc_initialize(bis, &tqma6_usdhc_cfg)) {
 123                 puts("Warning: failed to initialize eMMC dev\n");
 124         } else {
 125                 struct mmc *mmc = find_mmc_device(0);
 126                 if (mmc)
 127                         mmc_set_dsr(mmc, tqma6_emmc_dsr);
 128         }
 129
 130         tqma6_bb_board_mmc_init(bis);
 131
 132         return 0;
 133 }
 134
 135 static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = {
 136         /* SS1 */
 137         NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL),
 138         NEW_PAD_CTRL(MX6_PAD_EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL),
 139         NEW_PAD_CTRL(MX6_PAD_EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL),
 140         NEW_PAD_CTRL(MX6_PAD_EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
 141 };
 142
 143 #define TQMA6_SF_CS_GPIO IMX_GPIO_NR(3, 19)
 144
 145 static unsigned const tqma6_ecspi1_cs[] = {
 146         TQMA6_SF_CS_GPIO,
 147 };
 148
 149 __weak void tqma6_iomuxc_spi(void)
 150 {
 151         unsigned i;
 152
 153         for (i = 0; i < ARRAY_SIZE(tqma6_ecspi1_cs); ++i)
 154                 gpio_direction_output(tqma6_ecspi1_cs[i], 1);
 155         imx_iomux_v3_setup_multiple_pads(tqma6_ecspi1_pads,
 156                                          ARRAY_SIZE(tqma6_ecspi1_pads));
 157 }
 158
 159 int board_spi_cs_gpio(unsigned bus, unsigned cs)
 160 {
 161         return ((bus == CONFIG_SF_DEFAULT_BUS) &&
 162                 (cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1;
 163 }
 164
 165 static struct i2c_pads_info tqma6_i2c3_pads = {
 166         /* I2C3: on board LM75, M24C64,  */
 167         .scl = {
 168                 .i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__I2C3_SCL,
 169                                          I2C_PAD_CTRL),
 170                 .gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__GPIO1_IO05,
 171                                           I2C_PAD_CTRL),
 172                 .gp = IMX_GPIO_NR(1, 5)
 173         },
 174         .sda = {
 175                 .i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__I2C3_SDA,
 176                                          I2C_PAD_CTRL),
 177                 .gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06,
 178                                           I2C_PAD_CTRL),
 179                 .gp = IMX_GPIO_NR(1, 6)
 180         }
 181 };
 182
 183 static void tqma6_setup_i2c(void)
 184 {
 185         int ret;
 186         /*
 187          * use logical index for bus, e.g. I2C1 -> 0
 188          * warn on error
 189          */
 190         ret = setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads);
 191         if (ret)
 192                 printf("setup I2C3 failed: %d\n", ret);
 193 }
 194
 195 int board_early_init_f(void)
 196 {
 197         return tqma6_bb_board_early_init_f();
 198 }
 199
 200 int board_init(void)
 201 {
 202         /* address of boot parameters */
 203         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 204
 205         tqma6_iomuxc_spi();
 206         tqma6_setup_i2c();
 207
 208         tqma6_bb_board_init();
 209
 210         return 0;
 211 }
 212
 213 static const char *tqma6_get_boardname(void)
 214 {
 215         u32 cpurev = get_cpu_rev();
 216
 217         switch ((cpurev & 0xFF000) >> 12) {
 218         case MXC_CPU_MX6SOLO:
 219                 return "TQMa6S";
 220                 break;
 221         case MXC_CPU_MX6DL:
 222                 return "TQMa6DL";
 223                 break;
 224         case MXC_CPU_MX6D:
 225                 return "TQMa6D";
 226                 break;
 227         case MXC_CPU_MX6Q:
 228                 return "TQMa6Q";
 229                 break;
 230         default:
 231                 return "??";
 232         };
 233 }
 234
 235 int board_late_init(void)
 236 {
 237         struct pmic *p;
 238         u32 reg;
 239
 240         setenv("board_name", tqma6_get_boardname());
 241
 242         /*
 243          * configure PFUZE100 PMIC:
 244          * TODO: should go to power_init_board if bus switching is
 245          * fixed in generic power code
 246          */
 247         power_pfuze100_init(TQMA6_PFUZE100_I2C_BUS);
 248         p = pmic_get("PFUZE100");
 249         if (p && !pmic_probe(p)) {
 250                 pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
 251                 printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
 252         }
 253
 254         tqma6_bb_board_late_init();
 255
 256         return 0;
 257 }
 258
 259 int checkboard(void)
 260 {
 261         printf("Board: %s on a %s\n", tqma6_get_boardname(),
 262                tqma6_bb_get_boardname());
 263         return 0;
 264 }
 265
 266 /*
 267  * Device Tree Support
 268  */
 269 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
 270 int ft_board_setup(void *blob, bd_t *bd)
 271 {
 272         /* bring in eMMC dsr settings */
 273         do_fixup_by_path_u32(blob,
 274                              "/soc/aips-bus@02100000/usdhc@02198000",
 275                              "dsr", tqma6_emmc_dsr, 2);
 276         tqma6_bb_ft_board_setup(blob, bd);
 277
 278         return 0;
 279 }
 280 #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */