include/configs/controlcenterdc.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Stefan Roese <[email protected]>
   4  * Copyright (C) 2016 Mario Six <[email protected]>
   5  */
   6
   7 #ifndef _CONFIG_CONTROLCENTERDC_H
   8 #define _CONFIG_CONTROLCENTERDC_H
   9
  10 /*
  11  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  12  * for DDR ECC byte filling in the SPL before loading the main
  13  * U-Boot into it.
  14  */
  15
  16 /* Environment in SPI NOR flash */
  17
  18 /*
  19  * Environment Configuration
  20  */
  21
  22 #define CFG_EXTRA_ENV_SETTINGS                                          \
  23         "netdev=eth1\0"                                         \
  24         "consoledev=ttyS1\0"                                                    \
  25         "u-boot=u-boot.bin\0"                                                   \
  26         "bootfile_addr=1000000\0"                                               \
  27         "keyprogram_addr=3000000\0"                                             \
  28         "keyprogram_file=keyprogram.img\0"                                              \
  29         "fdtfile=controlcenterdc.dtb\0"                                         \
  30         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
  31         "mmcdev=0:2\0"                                                          \
  32         "update=sf probe 1:0;"                                                  \
  33                 " sf erase 0 +${filesize};"                                     \
  34                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
  35         "upd=run load update\0"                                                 \
  36         "fdt_high=0x10000000\0"                                                 \
  37         "initrd_high=0x10000000\0"                                              \
  38         "loadkeyprogram=tpm flush_keys;"                                        \
  39                 " mmc rescan;"                                                  \
  40                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
  41                 " source ${keyprogram_addr}:script@1\0"                         \
  42         "gpio1=gpio@22_25\0"                                                    \
  43         "gpio2=A29\0"                                                           \
  44         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
  45                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
  46         "bootfail=for i in ${blinkseq}; do"                                     \
  47                 " if test $i -eq 0; then"                                       \
  48                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
  49                 " elif test $i -eq 1; then"                                     \
  50                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
  51                 " elif test $i -eq 2; then"                                     \
  52                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
  53                 " else;"                                                        \
  54                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
  55                 " fi; sleep 0.12; done\0"
  56
  57 /*
  58  * mv-common.h should be defined after CMD configs since it used them
  59  * to enable certain macros
  60  */
  61 #include "mv-common.h"
  62
  63 #endif /* _CONFIG_CONTROLCENTERDC_H */