arch/arm/dts/am335x-boneblue.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5 /dts-v1/;
   6
   7 #include "am33xx.dtsi"
   8 #include "am335x-osd335x-common.dtsi"
   9 #include <dt-bindings/interrupt-controller/irq.h>
  10
  11 / {
  12         model = "TI AM335x BeagleBone Blue";
  13         compatible = "ti,am335x-bone-blue", "ti,am33xx";
  14
  15         chosen {
  16                 stdout-path = &uart0;
  17                 tick-timer = &timer2;
  18         };
  19
  20         leds {
  21                 pinctrl-names = "default";
  22                 pinctrl-0 = <&user_leds_s0>;
  23
  24                 compatible = "gpio-leds";
  25
  26                 usr_0_led {
  27                         label = "beaglebone:green:usr0";
  28                         gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
  29                         linux,default-trigger = "heartbeat";
  30                         default-state = "off";
  31                 };
  32
  33                 usr_1_led {
  34                         label = "beaglebone:green:usr1";
  35                         gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
  36                         linux,default-trigger = "mmc0";
  37                         default-state = "off";
  38                 };
  39
  40                 usr_2_led {
  41                         label = "beaglebone:green:usr2";
  42                         gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
  43                         linux,default-trigger = "cpu0";
  44                         default-state = "off";
  45                 };
  46
  47                 usr_3_led {
  48                         label = "beaglebone:green:usr3";
  49                         gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
  50                         linux,default-trigger = "mmc1";
  51                         default-state = "off";
  52                 };
  53
  54                 wifi_led {
  55                         label = "wifi";
  56                         gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
  57                         default-state = "off";
  58                         linux,default-trigger = "phy0assoc";
  59                 };
  60
  61                 red_led {
  62                         label = "red";
  63                         gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
  64                         default-state = "off";
  65                 };
  66
  67                 green_led {
  68                         label = "green";
  69                         gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
  70                         default-state = "off";
  71                 };
  72
  73                 batt_1_led {
  74                         label = "bat25";
  75                         gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
  76                         default-state = "off";
  77                 };
  78
  79                 batt_2_led {
  80                         label = "bat50";
  81                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  82                         default-state = "off";
  83                 };
  84
  85                 batt_3_led {
  86                         label = "bat75";
  87                         gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
  88                         default-state = "off";
  89                 };
  90
  91                 batt_4_led {
  92                         label = "bat100";
  93                         gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
  94                         default-state = "off";
  95                 };
  96         };
  97
  98         vmmcsd_fixed: fixedregulator0 {
  99                 compatible = "regulator-fixed";
 100                 regulator-name = "vmmcsd_fixed";
 101                 regulator-min-microvolt = <3300000>;
 102                 regulator-max-microvolt = <3300000>;
 103         };
 104
 105         wlan_en_reg: fixedregulator@2 {
 106                 compatible = "regulator-fixed";
 107                 regulator-name = "wlan-en-regulator";
 108                 regulator-min-microvolt = <1800000>;
 109                 regulator-max-microvolt = <1800000>;
 110                 startup-delay-us = <70000>;
 111
 112                 /* WL_EN */
 113                 gpio = <&gpio3 9 0>;
 114                 enable-active-high;
 115         };
 116 };
 117
 118 &am33xx_pinmux {
 119         user_leds_s0: user_leds_s0 {
 120                 pinctrl-single,pins = <
 121                         AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
 122                         AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
 123                         AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
 124                         AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
 125                         AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */
 126                         AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */
 127                         AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */
 128                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */
 129                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */
 130                         AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */
 131                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */
 132
 133                 >;
 134         };
 135
 136         i2c2_pins: pinmux_i2c2_pins {
 137                 pinctrl-single,pins = <
 138                         AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)      /* (D18) uart1_ctsn.I2C2_SDA */
 139                         AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)      /* (D17) uart1_rtsn.I2C2_SCL */
 140                 >;
 141         };
 142
 143         /* UT0 */
 144         uart0_pins: pinmux_uart0_pins {
 145                 pinctrl-single,pins = <
 146                         AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 147                         AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 148                 >;
 149         };
 150
 151         /* UT1 */
 152         uart1_pins: pinmux_uart1_pins {
 153                 pinctrl-single,pins = <
 154                         AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 155                         AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 156                 >;
 157         };
 158
 159         /* GPS */
 160         uart2_pins: pinmux_uart2_pins {
 161                 pinctrl-single,pins = <
 162                         AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1)       /* (A17) spi0_sclk.uart2_rxd */
 163                         AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)      /* (B17) spi0_d0.uart2_txd */
 164                 >;
 165         };
 166
 167         /* DSM2 */
 168         uart4_pins: pinmux_uart4_pins {
 169                 pinctrl-single,pins = <
 170                         AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)      /* (T17) gpmc_wait0.uart4_rxd */
 171                 >;
 172         };
 173
 174         /* UT5 */
 175         uart5_pins: pinmux_uart5_pins {
 176                 pinctrl-single,pins = <
 177                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4)       /* (U2) lcd_data9.uart5_rxd */
 178                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4)    /* (U1) lcd_data8.uart5_txd */
 179                 >;
 180         };
 181
 182         mmc1_pins: pinmux_mmc1_pins {
 183                 pinctrl-single,pins = <
 184                         AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)               /* (C15) spi0_cs1.gpio0[6] */
 185                 >;
 186         };
 187
 188         mmc2_pins: pinmux_mmc2_pins {
 189                 pinctrl-single,pins = <
 190                         AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)       /* (U9) gpmc_csn1.mmc1_clk */
 191                         AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)       /* (V9) gpmc_csn2.mmc1_cmd */
 192                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)        /* (U7) gpmc_ad0.mmc1_dat0 */
 193                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)        /* (V7) gpmc_ad1.mmc1_dat1 */
 194                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)        /* (R8) gpmc_ad2.mmc1_dat2 */
 195                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)        /* (T8) gpmc_ad3.mmc1_dat3 */
 196                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)        /* (U8) gpmc_ad4.mmc1_dat4 */
 197                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)        /* (V8) gpmc_ad5.mmc1_dat5 */
 198                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)        /* (R9) gpmc_ad6.mmc1_dat6 */
 199                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)        /* (T9) gpmc_ad7.mmc1_dat7 */
 200                 >;
 201         };
 202
 203         mmc3_pins: pinmux_mmc3_pins {
 204                 pinctrl-single,pins = <
 205                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6)       /* (L15) gmii1_rxd1.mmc2_clk */
 206                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6)      /* (J16) gmii1_txen.mmc2_cmd */
 207                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5)      /* (J17) gmii1_rxdv.mmc2_dat0 */
 208                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5)       /* (J18) gmii1_txd3.mmc2_dat1 */
 209                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5)       /* (K15) gmii1_txd2.mmc2_dat2 */
 210                         AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5)        /* (H16) gmii1_col.mmc2_dat3 */
 211                 >;
 212         };
 213
 214         bt_pins: pinmux_bt_pins {
 215                 pinctrl-single,pins = <
 216                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)      /* (K17) gmii1_txd0.gpio0[28] - BT_EN */
 217                 >;
 218         };
 219
 220         uart3_pins: pinmux_uart3_pins {
 221                 pinctrl-single,pins = <
 222                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)       /* (L17) gmii1_rxd3.uart3_rxd */
 223                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)    /* (L16) gmii1_rxd2.uart3_txd */
 224                         AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)           /* (M17) mdio_data.uart3_ctsn */
 225                         AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* (M18) mdio_clk.uart3_rtsn */
 226                 >;
 227         };
 228
 229         wl18xx_pins: pinmux_wl18xx_pins {
 230                 pinctrl-single,pins = <
 231                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)  /* (K18) gmii1_txclk.gpio3[9] - WL_EN */
 232                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
 233                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)    /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
 234                 >;
 235         };
 236
 237         /* DCAN */
 238         dcan1_pins: pinmux_dcan1_pins {
 239                 pinctrl-single,pins = <
 240                         AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)             /* (E17) uart0_rtsn.dcan1_rx */
 241                         AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)            /* (E18) uart0_ctsn.dcan1_tx */
 242                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7)             /* (M16) gmii1_rxd0.gpio2[21] */
 243                 >;
 244         };
 245
 246         /* E1 */
 247         eqep0_pins: pinmux_eqep0_pins {
 248                 pinctrl-single,pins = <
 249                         AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1)            /* (B12) mcasp0_aclkr.eQEP0A_in */
 250                         AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1)             /* (C13) mcasp0_fsr.eQEP0B_in */
 251                 >;
 252         };
 253
 254         /* E2 */
 255         eqep1_pins: pinmux_eqep1_pins {
 256                 pinctrl-single,pins = <
 257                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2)             /* (V2) lcd_data12.eQEP1A_in */
 258                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2)             /* (V3) lcd_data13.eQEP1B_in */
 259                 >;
 260         };
 261
 262         /* E3 */
 263         eqep2_pins: pinmux_eqep2_pins {
 264                 pinctrl-single,pins = <
 265                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4)              /* (T12) gpmc_ad12.eQEP2A_in */
 266                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4)              /* (R12) gpmc_ad13.eQEP2B_in */
 267                 >;
 268         };
 269 };
 270
 271 &uart0 {
 272         pinctrl-names = "default";
 273         pinctrl-0 = <&uart0_pins>;
 274
 275         status = "okay";
 276 };
 277
 278 &uart1 {
 279         pinctrl-names = "default";
 280         pinctrl-0 = <&uart1_pins>;
 281
 282         status = "okay";
 283 };
 284
 285 &uart2 {
 286         pinctrl-names = "default";
 287         pinctrl-0 = <&uart2_pins>;
 288
 289         status = "okay";
 290 };
 291
 292 &uart4 {
 293         pinctrl-names = "default";
 294         pinctrl-0 = <&uart4_pins>;
 295
 296         status = "okay";
 297 };
 298
 299 &uart5 {
 300         pinctrl-names = "default";
 301         pinctrl-0 = <&uart5_pins>;
 302
 303         status = "okay";
 304 };
 305
 306 &usb0 {
 307         dr_mode = "peripheral";
 308         interrupts-extended = <&intc 18 &tps 0>;
 309         interrupt-names = "mc", "vbus";
 310 };
 311
 312 &usb1 {
 313         dr_mode = "host";
 314 };
 315
 316 &i2c0 {
 317         baseboard_eeprom: baseboard_eeprom@50 {
 318                 compatible = "atmel,24c256";
 319                 reg = <0x50>;
 320
 321                 #address-cells = <1>;
 322                 #size-cells = <1>;
 323                 baseboard_data: baseboard_data@0 {
 324                         reg = <0 0x100>;
 325                 };
 326         };
 327 };
 328
 329 &i2c2 {
 330         pinctrl-names = "default";
 331         pinctrl-0 = <&i2c2_pins>;
 332
 333         status = "okay";
 334         clock-frequency = <400000>;
 335
 336         mpu9250@68 {
 337                 compatible = "invensense,mpu9250";
 338                 reg = <0x68>;
 339                 interrupt-parent = <&gpio3>;
 340                 interrupts = <21 IRQ_TYPE_EDGE_RISING>;
 341                 i2c-gate {
 342                         #address-cells = <1>;
 343                         #size-cells = <0>;
 344                         ax8975@c {
 345                                 compatible = "asahi-kasei,ak8975";
 346                                 reg = <0x0c>;
 347                         };
 348                 };
 349         };
 350
 351         pressure@76 {
 352                 compatible = "bosch,bmp280";
 353                 reg = <0x76>;
 354         };
 355 };
 356
 357 /include/ "tps65217.dtsi"
 358
 359 &tps {
 360         /delete-property/ ti,pmic-shutdown-controller;
 361
 362         charger {
 363                 interrupts = <0>, <1>;
 364                 interrupt-names = "USB", "AC";
 365                 status = "okay";
 366         };
 367 };
 368
 369 &mmc1 {
 370         status = "okay";
 371         vmmc-supply = <&vmmcsd_fixed>;
 372         bus-width = <4>;
 373         pinctrl-names = "default";
 374         pinctrl-0 = <&mmc1_pins>;
 375         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 376 };
 377
 378 &mmc2 {
 379         status = "okay";
 380         vmmc-supply = <&vmmcsd_fixed>;
 381         bus-width = <8>;
 382         pinctrl-names = "default";
 383         pinctrl-0 = <&mmc2_pins>;
 384 };
 385
 386 &mmc3 {
 387         dmas = <&edma_xbar 12 0 1
 388                 &edma_xbar 13 0 2>;
 389         dma-names = "tx", "rx";
 390         status = "okay";
 391         vmmc-supply = <&wlan_en_reg>;
 392         bus-width = <4>;
 393         non-removable;
 394         cap-power-off-card;
 395         keep-power-in-suspend;
 396         pinctrl-names = "default";
 397         pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
 398
 399         #address-cells = <1>;
 400         #size-cells = <0>;
 401         wlcore: wlcore@2 {
 402                 compatible = "ti,wl1835";
 403                 reg = <2>;
 404                 interrupt-parent = <&gpio0>;
 405                 interrupts = <21 IRQ_TYPE_EDGE_RISING>;
 406         };
 407 };
 408
 409 &tscadc {
 410         status = "okay";
 411         adc {
 412                 ti,adc-channels = <0 1 2 3 4 5 6 7>;
 413         };
 414 };
 415
 416 &uart3 {
 417         pinctrl-names = "default";
 418         pinctrl-0 = <&uart3_pins &bt_pins>;
 419         status = "okay";
 420
 421         bluetooth {
 422                 compatible = "ti,wl1835-st";
 423                 enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 424         };
 425 };
 426
 427 &rtc {
 428         system-power-controller;
 429         clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 430         clock-names = "ext-clk", "int-clk";
 431 };
 432
 433 &dcan1 {
 434         pinctrl-names = "default";
 435         pinctrl-0 = <&dcan1_pins>;
 436         status = "okay";
 437 };
 438
 439 &gpio0 {
 440         gpio-line-names =
 441                 "UART3_CTS", /* M17 */
 442                 "UART3_RTS", /* M18 */
 443                 "UART2_RX", /* A17 */
 444                 "UART2_TX", /* B17 */
 445                 "I2C1_SDA", /* B16 */
 446                 "I2C1_SCL", /* A16 */
 447                 "MMC0_CD", /* C15 */
 448                 "SPI1_SS2", /* C18 */
 449                 "EQEP_1A", /* V2 */
 450                 "EQEP_1B", /* V3 */
 451                 "MDIR_2B", /* V4 */
 452                 "BATT_LED_2", /* T5 */
 453                 "I2C2_SDA", /* D18 */
 454                 "I2C2_SCL", /* D17 */
 455                 "UART1_RX", /* D16 */
 456                 "UART1_TX", /* D15 */
 457                 "MMC2_DAT1", /* J18 */
 458                 "MMC2_DAT2", /* K15 */
 459                 "NC", /* F16 */
 460                 "WIFI_LED", /* A15 */
 461                 "MOT_STBY", /* D14 */
 462                 "WLAN_IRQ", /* K16 */
 463                 "PWM_2A", /* U10 */
 464                 "PWM_2B", /* T10 */
 465                 "",
 466                 "",
 467                 "BATT_LED_4", /* T11 */
 468                 "BATT_LED_1", /* U12 */
 469                 "BT_EN", /* K17 */
 470                 "SPI1_SS1", /* H18 */
 471                 "UART4_RX", /* T17 */
 472                 "MDIR_1B"; /* U17 */
 473 };
 474
 475 &gpio1 {
 476         gpio-line-names =
 477                 "MMC1_DAT0", /* U7 */
 478                 "MMC1_DAT1", /* V7 */
 479                 "MMC1_DAT2", /* R8 */
 480                 "MMC1_DAT3", /* T8 */
 481                 "MMC1_DAT4", /* U8 */
 482                 "MMC1_DAT5", /* V8 */
 483                 "MMC1_DAT6", /* R9 */
 484                 "MMC1_DAT7", /* T9 */
 485                 "DCAN1_TX", /* E18 */
 486                 "DCAN1_RX", /* E17 */
 487                 "UART0_RX", /* E15 */
 488                 "UART0_TX", /* E16 */
 489                 "EQEP_2A", /* T12 */
 490                 "EQEP_2B", /* R12 */
 491                 "PRU_E_A", /* V13 */
 492                 "PRU_E_B", /* U13 */
 493                 "MDIR_2A", /* R13 */
 494                 "GPIO1_17", /* V14 */
 495                 "PWM_1A", /* U14 */
 496                 "PWM_1B", /* T14 */
 497                 "EMMC_RST", /* R14 */
 498                 "USR_LED_0", /* V15 */
 499                 "USR_LED_1", /* U15 */
 500                 "USR_LED_2", /* T15 */
 501                 "USR_LED_3", /* V16 */
 502                 "GPIO1_25", /* U16 */
 503                 "MCASP0_AXR0", /* T16 */
 504                 "MCASP0_AXR1", /* V17 */
 505                 "MCASP0_ACLKR", /* U18 */
 506                 "BATT_LED_3", /* V6 */
 507                 "MMC1_CLK", /* U9 */
 508                 "MMC1_CMD"; /* V9 */
 509 };
 510
 511 &gpio2 {
 512         gpio-line-names =
 513                 "MDIR_1A", /* T13 */
 514                 "MCASP0_FSR", /* V12 */
 515                 "LED_RED", /* R7 */
 516                 "LED_GREEN", /* T7 */
 517                 "MODE_BTN", /* U6 */
 518                 "PAUSE_BTN", /* T6 */
 519                 "MDIR_4A", /* R1 */
 520                 "MDIR_4B", /* R2 */
 521                 "MDIR_3B", /* R3 */
 522                 "MDIR_3A", /* R4 */
 523                 "SVO7", /* T1 */
 524                 "SVO8", /* T2 */
 525                 "SVO5", /* T3 */
 526                 "SVO6", /* T4 */
 527                 "UART5_TX", /* U1 */
 528                 "UART5_RX", /* U2 */
 529                 "SERVO_EN", /* U3 */
 530                 "NC", /* U4 */
 531                 "UART3_RX", /* L17 */
 532                 "UART3_TX", /* L16 */
 533                 "MMC2_CLK", /* L15 */
 534                 "DCAN1_SILENT", /* M16 */
 535                 "SVO1", /* U5 */
 536                 "SVO3", /* R5 */
 537                 "SVO2", /* V5 */
 538                 "SVO4", /* R6 */
 539                 "MMC0_DAT3", /* F17 */
 540                 "MMC0_DAT2", /* F18 */
 541                 "MMC0_DAT1", /* G15 */
 542                 "MMC0_DAT0", /* G16 */
 543                 "MMC0_CLK", /* G17 */
 544                 "MMC0_CMD"; /* G18 */
 545 };
 546
 547 &gpio3 {
 548         gpio-line-names =
 549                 "MMC2_DAT3", /* H16 */
 550                 "GPIO3_1", /* H17 */
 551                 "GPIO3_2", /* J15 */
 552                 "MMC2_CMD", /* J16 */
 553                 "MMC2_DAT0", /* J17 */
 554                 "I2C0_SDA", /* C17 */
 555                 "I2C0_SCL", /* C16 */
 556                 "EMU1", /* C14 */
 557                 "EMU0", /* B14 */
 558                 "WL_EN", /* K18 */
 559                 "WL_BT_OE", /* L18 */
 560                 "",
 561                 "",
 562                 "NC", /* F15 */
 563                 "SPI1_SCK", /* A13 */
 564                 "SPI1_MISO", /* B13 */
 565                 "SPI1_MOSI", /* D12 */
 566                 "GPIO3_17", /* C12 */
 567                 "EQEP_0A", /* B12 */
 568                 "EQEP_0B", /* C13 */
 569                 "GPIO3_20", /* D13 */
 570                 "IMU_INT", /* A14 */
 571                 "",
 572                 "",
 573                 "",
 574                 "",
 575                 "",
 576                 "",
 577                 "",
 578                 "",
 579                 "",
 580                 "";
 581
 582         ls-buf-en-hog {
 583                 gpio-hog;
 584                 gpios = <10 GPIO_ACTIVE_HIGH>;
 585                 output-high;
 586         };
 587 };
 588
 589 &epwmss0 {
 590         status = "okay";
 591 };
 592
 593 &eqep0 {
 594         pinctrl-names = "default";
 595         pinctrl-0 = <&eqep0_pins>;
 596         status = "okay";
 597 };
 598
 599 &epwmss1 {
 600         status = "okay";
 601 };
 602
 603 &eqep1 {
 604         pinctrl-names = "default";
 605         pinctrl-0 = <&eqep1_pins>;
 606         status = "okay";
 607 };
 608
 609 &epwmss2 {
 610         status = "okay";
 611 };
 612
 613 &eqep2 {
 614         pinctrl-names = "default";
 615         pinctrl-0 = <&eqep2_pins>;
 616         status = "okay";
 617 };