5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * netdev.h - definitions an prototypes for network devices
32 * Board and CPU-specific initialization functions
33 * board_eth_init() has highest priority. cpu_eth_init() only
34 * gets called if board_eth_init() isn't instantiated or fails.
40 int board_eth_init(bd_t *bis);
41 int cpu_eth_init(bd_t *bis);
43 /* Driver initialization prototypes */
44 int altera_tse_initialize(u8 dev_num, int mac_base,
45 int sgdma_rx_base, int sgdma_tx_base);
46 int at91emac_register(bd_t *bis, unsigned long iobase);
47 int au1x00_enet_initialize(bd_t*);
48 int ax88180_initialize(bd_t *bis);
49 int bfin_EMAC_initialize(bd_t *bis);
50 int cs8900_initialize(u8 dev_num, int base_addr);
51 int davinci_emac_initialize(void);
52 int dc21x4x_initialize(bd_t *bis);
53 int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
54 int dm9000_initialize(bd_t *bis);
55 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
56 int e1000_initialize(bd_t *bis);
57 int eepro100_initialize(bd_t *bis);
58 int enc28j60_initialize(unsigned int bus, unsigned int cs,
59 unsigned int max_hz, unsigned int mode);
60 int ep93xx_eth_initialize(u8 dev_num, int base_addr);
61 int eth_3com_initialize (bd_t * bis);
62 int ethoc_initialize(u8 dev_num, int base_addr);
63 int fec_initialize (bd_t *bis);
64 int fecmxc_initialize(bd_t *bis);
65 int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
66 int ftgmac100_initialize(bd_t *bits);
67 int ftmac100_initialize(bd_t *bits);
68 int greth_initialize(bd_t *bis);
69 void gt6426x_eth_initialize(bd_t *bis);
70 int inca_switch_initialize(bd_t *bis);
71 int ks8695_eth_initialize(void);
72 int lan91c96_initialize(u8 dev_num, int base_addr);
73 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
74 int mcdmafec_initialize(bd_t *bis);
75 int mcffec_initialize(bd_t *bis);
76 int mpc512x_fec_initialize(bd_t *bis);
77 int mpc5xxx_fec_initialize(bd_t *bis);
78 int mpc8220_fec_initialize(bd_t *bis);
79 int mpc82xx_scc_enet_initialize(bd_t *bis);
80 int mvgbe_initialize(bd_t *bis);
81 int natsemi_initialize(bd_t *bis);
82 int npe_initialize(bd_t *bis);
83 int ns8382x_initialize(bd_t *bis);
84 int pcnet_initialize(bd_t *bis);
85 int plb2800_eth_initialize(bd_t *bis);
86 int ppc_4xx_eth_initialize (bd_t *bis);
87 int rtl8139_initialize(bd_t *bis);
88 int rtl8169_initialize(bd_t *bis);
89 int scc_initialize(bd_t *bis);
90 int sh_eth_initialize(bd_t *bis);
91 int skge_initialize(bd_t *bis);
92 int smc91111_initialize(u8 dev_num, int base_addr);
93 int smc911x_initialize(u8 dev_num, int base_addr);
94 int tsi108_eth_initialize(bd_t *bis);
95 int uec_standard_init(bd_t *bis);
96 int uli526x_initialize(bd_t *bis);
97 int armada100_fec_register(unsigned long base_addr);
98 int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
99 unsigned long dma_addr);
100 int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr);
102 /* Boards with PCI network controllers can call this from their board_eth_init()
103 * function to initialize whatever's on board.
104 * Return value is total # of devices found */
106 static inline int pci_eth_init(bd_t *bis)
112 #ifdef CONFIG_EEPRO100
113 num += eepro100_initialize(bis);
116 num += dc21x4x_initialize(bis);
119 num += e1000_initialize(bis);
122 num += pcnet_initialize(bis);
124 #ifdef CONFIG_NATSEMI
125 num += natsemi_initialize(bis);
127 #ifdef CONFIG_NS8382X
128 num += ns8382x_initialize(bis);
130 #if defined(CONFIG_RTL8139)
131 num += rtl8139_initialize(bis);
133 #if defined(CONFIG_RTL8169)
134 num += rtl8169_initialize(bis);
136 #if defined(CONFIG_ULI526X)
137 num += uli526x_initialize(bis);
140 #endif /* CONFIG_PCI */
145 * Boards with mv88e61xx switch can use this by defining
146 * CONFIG_MV88E61XX_SWITCH in respective board configheader file
147 * the stuct and enums here are used to specify switch configuration params
149 #if defined(CONFIG_MV88E61XX_SWITCH)
150 enum mv88e61xx_cfg_vlan {
151 MV88E61XX_VLANCFG_DEFAULT,
152 MV88E61XX_VLANCFG_ROUTER
155 enum mv88e61xx_cfg_mdip {
156 MV88E61XX_MDIP_NOCHANGE,
157 MV88E61XX_MDIP_REVERSE
160 enum mv88e61xx_cfg_ledinit {
161 MV88E61XX_LED_INIT_DIS,
162 MV88E61XX_LED_INIT_EN
165 enum mv88e61xx_cfg_rgmiid {
166 MV88E61XX_RGMII_DELAY_DIS,
167 MV88E61XX_RGMII_DELAY_EN
170 enum mv88e61xx_cfg_prtstt {
171 MV88E61XX_PORTSTT_DISABLED,
172 MV88E61XX_PORTSTT_BLOCKING,
173 MV88E61XX_PORTSTT_LEARNING,
174 MV88E61XX_PORTSTT_FORWARDING
177 struct mv88e61xx_config {
179 enum mv88e61xx_cfg_vlan vlancfg;
180 enum mv88e61xx_cfg_rgmiid rgmii_delay;
181 enum mv88e61xx_cfg_prtstt portstate;
182 enum mv88e61xx_cfg_ledinit led_init;
183 enum mv88e61xx_cfg_mdip mdip;
188 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
189 #endif /* CONFIG_MV88E61XX_SWITCH */
192 * Allow FEC to fine-tune MII configuration on boards which require this.
194 int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
196 #endif /* _NETDEV_H_ */