1 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
3 Date: Sun Aug 12 21:34:34 2007 +0200
5 Minor alignment of output, 2nd try.
10 commit 6b309f22a724fad8418e811751a0741b893419cf
12 Date: Sun Aug 12 20:35:49 2007 +0200
14 Minor alignment of output
18 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
20 Date: Sun Aug 12 18:28:18 2007 +0200
22 Cleanup output on ADS5121 board
24 Signed-off-by: Wolfgang Denk
26 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
28 Date: Sun Aug 12 15:11:38 2007 +0200
30 Adapt board configuration and fix kernel crash on MCC200 board.
32 The update procedure was modified to turn off the USB subsystem
33 before exit for MCC200 and TRAB. This is necessary as otherwise the
34 USB controller continues to write periodically to system memory!
36 MCC200-specific notes:
37 - the patch disables the magic key check for MCC200
38 - the patch contains the configuration changes made
39 for the new revision of the board.
44 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
46 Date: Sun Aug 12 14:47:54 2007 +0200
48 Adjust default configuration of ADS5121 board.
52 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
54 Date: Sun Aug 12 14:27:39 2007 +0200
56 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
60 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
62 Date: Tue Aug 7 21:14:22 2007 -0400
64 Improve error print messages.
68 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
70 Date: Tue Jul 17 13:57:04 2007 -0500
72 fdt: allow for builds that don't want env and bd_t nodes
74 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
79 commit 91148bf7aeba142d6f348805db7625db7da64d6f
81 Date: Tue Jul 17 13:56:53 2007 -0500
83 fdt: do board setup based on fdt address specified on bootm line
85 The last fdt patch to bootm did board setup based on the address
86 specified by a prior fdt address command invocation. The bootm
87 code, as its call to fdt_chosen does, should use the fdt specified
88 by the user on the bootm command. Note this restores full
89 functionality for the 8360's existing default boot environment
90 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
91 before booting a kernel).
95 commit e125a2ffc209dd34794e326c7175658253beadf3
97 Date: Tue Jul 10 20:40:39 2007 -0400
99 Call ft_board_setup() from the bootm command.
101 In the patch titled "Create new fdt boardsetup command..." I removed the
102 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
103 to add a direct call back into cmd_bootm.c
105 This fixes the oversight by adding the direct call to the bootm command.
109 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
111 Date: Mon Jun 25 23:25:28 2007 -0400
113 Create new fdt boardsetup command, fix bug parsing [] form of set values.
115 Previously ft_board_setup() was called by fdt_chosen() which was not
116 really correctly structured. This splits ft_board_setup() out by creating
117 a new fdt boardsetup command.
119 Fix a bug when parsing fdt set command values which have the square
120 bracket form [00 11 22 33] - the length was updated incorrectly in when
125 commit 6f35ded9e85493595e0eb66a82b502a95326d049
127 Date: Mon Jun 25 20:55:58 2007 -0400
129 Tighten up the error messages.
133 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
135 Date: Mon Jun 25 19:52:23 2007 -0400
137 Asthetic improvements: error messages and line lengths.
139 Tighten up the error messages, split overlength lines.
143 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
145 Date: Fri May 25 22:08:57 2007 -0400
147 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
149 The fdt_chosen() function was adding/seting some properties ad-hoc
150 improperly and duplicated (poorly) what was done in ft_board_setup()
152 Clean up long lines (setting properties, printing errors).
156 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
158 Date: Mon May 21 23:27:16 2007 -0400
160 For fdt_find_node_by_path(), handle the root path properly.
162 Also removes the special case root path detection in cmd_fdt.c since it
163 is no longer necessary.
167 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
169 Date: Thu May 17 23:54:36 2007 -0400
171 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
176 commit 1a861169bc3758f9de3aead62b058736c6891246
178 Date: Wed Jun 6 22:47:58 2007 -0400
180 Replace fdt_node_offset() with fdt_find_node_by_path().
182 The new name matches more closely the kernel's name, which is also
183 a much better description.
188 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
190 Date: Wed May 16 22:39:59 2007 -0400
192 Fix cmd_fdt line lengths, refactor code.
194 Break lines that were greater than 80 characters in length.
195 Move the fdt print and property parsing code to separate static functions
196 to reduce coding clutter in the fdt_cmd handling body.
200 commit 25114033ab21788810c48ba4df103b649da1223b
202 Date: Sat May 12 09:47:25 2007 -0400
204 FDT command improvements.
206 Fix "fdt set" so that it will create a non-existing property.
207 Add "fdt mknode" to create nodes.
211 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
213 Date: Sat May 12 09:45:46 2007 -0400
215 Reorganize and fix problems (returns) in the bootm command.
217 Do *NOT* return after the "point of no return" has been passed.
218 If something goes wrong, the board must be reset after that point.
219 Move the "Transferring control to Linux" debug message back to where it
220 belongs: just before transferring control to linux.
224 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
226 Date: Tue May 8 21:27:35 2007 -0400
228 Fix bugs in the CONFIG_OF_LIBFDT
230 Stupid coding mistakes (identified by Timur Tabi, thanks).
234 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
236 Date: Wed Apr 25 22:47:15 2007 -0400
238 Improve fdt move length handling.
240 Make the length parameter optional: if not specified, do the move using
241 the current size unchanged.
245 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
247 Date: Wed Apr 25 22:23:36 2007 -0400
251 Declare the variable fdt properly as extern.
252 Call the "set_fn" function pointer the "short way" without the full
253 dereferencing syntax.
257 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
259 Date: Wed Apr 25 21:24:27 2007 -0400
261 Improve error messages, more informative.
263 Print more than the raw libfdt error message strings. This is especially
264 useful for cluing in the user when the bootm command aborts due to
269 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
271 Date: Fri Apr 20 22:46:53 2007 -0400
273 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
275 This is the way u-boot reduces configured-out code. At Wolfgang
276 Grandegger and Wolfgang Denk's request, make libfdt conform.
280 commit 923efd286411ed052d9e074f59f8986d6081061c
282 Date: Fri Aug 10 14:54:47 2007 -0700
284 add image size and descriptors for Spartan 3E FPGA chips
286 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
290 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
292 Date: Fri Aug 10 15:34:48 2007 -0500
294 make MAKEALL more immune to merge conflicts
296 ..by placing board entries one per line, as suggested by jdl.
300 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
302 Date: Fri Aug 10 13:28:25 2007 -0500
304 README: Remove outdated cpu type, board type, and NAME_config lists
308 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
310 Date: Fri Aug 10 15:48:59 2007 +0800
312 mpc83xx: Suppress the warning 'burstlen'
314 suppress the warning 'burstlen' of spd_sdram.
318 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
320 Date: Fri Aug 10 20:34:58 2007 +0200
322 Conding style cleanup
326 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
328 Date: Fri Aug 10 20:26:18 2007 +0200
330 [ARM] TI DaVinci support, hopefully final
332 Add support for the following DaVinci boards:
339 - Split into separate board directories
340 - Removed changes to MTD_DEBUG (or whatever it's called)
341 - New CONFIG_CMD party line followed
342 - Some cosmetic fixes, cleanup etc.
343 - Patches against the latest U-Boot tree as of now.
344 - Fixed CONFIG_CMD_NET in net files.
345 - Fixed CONFIG_CMD_EEPROM for schmoogie.
346 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
347 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
348 but it at least compiles.
350 Here is an excerpt from session log on SCHMOOGIE...
352 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
361 ETH PHY : DP83848 @ 0x01
363 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
364 U-Boot > ping 192.168.253.10
365 host 192.168.253.10 is alive
373 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
375 Date: Thu Aug 2 17:42:08 2007 +0200
377 Make use of generic 64bit division in nand_util.c
379 Use generic 64bit division in nand_util.c. This makes nand_util.c
380 independent of any toolchain 64bit division.
384 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
386 Date: Thu Aug 2 17:41:14 2007 +0200
388 Move 64bit division from avr32 to generic lib
390 Move the 64bit division from lib_avr32 to lib_generic. With this, all
391 boards can do_div/__div64_32 if needed, not only avr one. Code is put
392 to lib_generic, so no larger memory footprint if not used. No code
393 modifications. Thanks for proposal by Håvard Skinnemoen.
397 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
399 Date: Mon Aug 6 18:18:34 2007 -0500
401 mpc83xx: fix ITX[GP] O=builddir builds
403 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
405 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
406 "BUILD_DIR=<some dir> ./MAKEALL ..."
410 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
412 Date: Wed Aug 1 15:00:59 2007 +0800
414 mpc83xx: Correct the README for DDR ECC
416 Update the README for DDR ECC, change the name
417 to README.mpc83xx.ddrecc.
422 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
424 Date: Wed Aug 1 15:00:15 2007 +0800
426 mpc83xx: Consolidate the ECC support of 83xx
428 Remove the duplicated source code of ecc command on the <board>.c,
429 for reused, move these code to cpu/mpc83xx directory.
434 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
436 Date: Sat Aug 4 13:37:39 2007 +0800
438 mpc83xx: Correct the burst length for DDR2 with 32 bits
440 The burst length should be 4 for DDR2 with 32 bits bus
444 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
446 Date: Wed Jul 25 19:25:33 2007 -0500
448 mpc83xx: add support for the MPC8323E RDB
450 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
451 five 10/100 ethernet ports connected via an ICPlus IP175C
452 switch, one PCI slot, and serial. Features not supported
453 in this patch are SD card interface, 2 USB ports, and the
459 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
461 Date: Wed Jul 25 19:25:28 2007 -0500
463 mpc83xx: fixup generic pci for libfdt
465 add libfdt support to the generic 83xx pci code
469 commit f57ac7a7b37109245b69db80839ebee26179966a
471 Date: Wed Jul 25 19:25:22 2007 -0500
473 mpc83xx: fix 8360 and cpu functions to update fdt being passed
475 ..and not the global fdt. Rename local fdt vars to blob so as not to
476 be confused with the global var with the same three-letter name.
480 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
482 Date: Wed Jul 4 21:34:24 2007 -0400
484 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
486 Several node strings were not correct (trailing slashes and properties
488 Added setting of the timebase-frequency.
489 Improved error messages and use debug() instead of printf().
494 commit 26d02c9bbac1751c5e19294f000100b48d43a920
496 Date: Wed Jul 4 21:27:30 2007 -0400
498 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
500 The new name matches more closely the kernel's name, which is also
501 a much better description.
503 These are the mpc83xx changes made necessary by the function name change.
509 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
511 Date: Mon Jun 25 10:41:56 2007 +0800
513 mpc83xx: Add support for the display of reset status
515 83xx processor family has many reset sources, such as
516 power on reset, software hard reset, software soft reset,
517 JTAG, bus monitor, software watchdog, check stop reset,
518 external hard reset, external software reset.
519 sometimes, to figure out the fault of system, we need to
520 know the cause of reset early before the prompt of
526 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
528 Date: Mon Jun 25 10:41:04 2007 +0800
530 mpc83xx: Fix the align bug of SDMA buffer
532 According to the latest user manual, the SDMA temporary
533 buffer base address must be 4KB aligned.
538 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
540 Date: Mon Jun 25 13:21:12 2007 +0800
542 mpc83xx: Revise the MPC8360EMDS readme doc
544 When the rev2.x silicon mount on the MPC8360EMDS baord,
545 and if you are using the u-boot version after the commit
546 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
547 to make the ethernet interface usable, we have to setup
548 the jumpers correctly.
553 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
555 Date: Tue Jul 3 13:46:32 2007 -0500
557 FSL I2C driver programs the two I2C busses differently
559 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
560 The second I2C bus has its slave address programmed incorrectly and is
561 missing a 5-us delay.
566 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
568 Date: Tue Jul 3 13:04:34 2007 -0500
570 Update SCCR programming in cpu_init_f() to support all 83xx processors
572 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
573 bitfields for all 83xx processors. The code to update some bitfields was
574 compiled only on some processors. Now, the bitfields are programmed as long
575 as the corresponding CFG_SCCR option is defined in the board header file.
576 This means that the board header file should not define any CFG_SCCR macros
577 for bitfields that don't exist on that processor, otherwise the SCCR will be
578 programmed incorrectly.
583 commit 9546266999f0b9b51372636614211b88d90f0f25
585 Date: Fri Jun 22 13:04:22 2007 +0200
587 TQM834x: cleanup configuraton
589 Remove irritating #undef DEBUG
594 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
596 Date: Mon Jun 18 09:09:53 2007 -0700
598 MPC83xx: Fix makefile to generate config.h file in the build directory
600 MPC83xx: Fix the Makefile config sections to generate the include/config.h
601 file in the build directory instead of the source directory.
606 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
608 Date: Thu Jun 14 20:07:33 2007 -0500
610 mpc83xx: Add support for 8360 silicon revision 2.1
612 This change adds 8360 silicon revision 2.1 support to u-boot.
617 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
619 Date: Wed Aug 8 04:14:28 2007 -0500
621 Treat ppc64 host as ppc
625 commit 0dc4279b08ff82472bec2e2c90858602459febe8
627 Date: Wed Aug 8 09:01:46 2007 +0800
629 Minor fix for bios emulator makefile
631 Add $(obj) to LIB avoiding objects be built in the source dir
635 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
637 Date: Wed Aug 8 08:33:11 2007 +0800
639 Add CONFIG_BIOSEMU define to guard all the bios emulator code
643 This patch fix the compile issue on the board that did not enable the bios emulator
645 commit ed8106433522f2ea8933e9808346860d061d7731
647 Date: Tue Jul 31 12:27:25 2007 -0500
649 tsec: fix multiple PHY support
651 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
652 broke multiple PHY support in tsec.c. This fixes it.
657 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
659 Date: Thu Aug 9 09:08:18 2007 -0500
661 tsec: Allow Ten Bit Interface address to be configurable
663 Allow the address of the Ten Bit Interface (TBI) to be changed in the
664 event of a conflict with another device.
668 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
670 Date: Tue Aug 7 16:17:06 2007 +0800
672 Add CONFIG_BIOSEMU define to guard all the bios emulator code
674 This patch fix the compile issue on the board that did not enable the bios emulator
676 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
678 Date: Tue Aug 7 16:02:13 2007 +0200
680 Fix missing brace error in fs/fat/fat.c
681 [pointed out by Roderik Wildenburg]
685 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
687 Date: Mon Aug 6 23:21:05 2007 +0200
689 Fixed typo in README (pointed out by Martin Jost).
693 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
695 Date: Mon Aug 6 02:17:36 2007 +0200
697 Coding style cleanup. Update CHANGELOG.
701 commit 221838cc7eb178370ff62aa05920a582e12ac322
703 Date: Tue Jul 10 09:03:22 2007 +0800
705 Remove the bios emulator from MAI board.
707 The bios emulator in the MAI board can not pass compile
708 and have a lot of crap in it. remove it and will have a
709 clean and small bios emulator in the drivers directory
710 which can be uesed for every board.
714 commit 5618332409bb96f4448d1712899369fc80c0b489
716 Date: Fri Jul 13 12:14:59 2007 +0800
718 Fix some compile issues for MAI board.
722 commit 0f460a1ee148b648ee242c3157650287d4296260
724 Date: Fri Jul 13 12:14:58 2007 +0800
726 Configurations for ATI video card BIOS emulator
728 This patch add definition of the BIOS emulator and the ATI framebuffer
729 driver for MPC8641HPCN board.
734 commit ece92f85053b8df613edcf05b26a416cbc3d629c
736 Date: Fri Jul 6 08:34:56 2007 +0800
738 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
739 ATI video card BIOS. and can be used for x86 code emulation by some
744 commit 5072188acabde3178fac7f5a597150e6e74fd40c
746 Date: Fri Jul 6 08:33:33 2007 +0800
748 This is a framebuffer driver for ATI video card, can work for PCI9200,
749 X300, X700, X800 ATI video cards.
754 commit 5728be389e65fd47f34b33c2596271eb4db751ae
756 Date: Mon Aug 6 01:01:49 2007 +0200
758 Coding style cleanup. Update CHANGELOG.
762 commit 8092fef4c29b395958bb649647da7e3775731517
764 Date: Tue Dec 12 14:26:01 2006 +0100
766 Add functions to list of exported functions
768 Additionally export the following fuctions (to make trab_config build again):
772 Also bump the ABI version to reflect this change
776 commit 63cec5814fab5d2b1c86982327433807a5ac0249
778 Date: Thu Aug 2 14:09:49 2007 -0500
780 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
782 All of the PCI/PCI-Express driver and initialization code that
783 was in the MPC8641HPCN port has now been moved into the common
784 drivers/fsl_pci_init.c. In a subsequent patch, this will be
785 utilized by the 85xx ports as well.
787 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
789 Also enable the second PCI-Express controller on 8641
790 by getting its BATS and CFG_ setup right.
792 Fixed a u16 vendor compiler warning in AHCI driver too.
798 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
800 Date: Fri Aug 3 12:08:16 2007 +0200
802 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
804 Add the ability for modules from the Schindler cm5200 family to use a
806 - rename cm1_qp1 to cm5200
807 - add run-time module detection
808 - parametrize SDRAM configuration according to the module we are running on
810 Few minor, board-specific fixes included in this patch:
811 - better MAC address handling
812 - updated default environment ('update' command uses +{filesize} now)
813 - improved error messages in the auto-update code
814 - allow booting U-Boot from RAM (CFG_RAMBOOT)
820 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
822 Date: Fri Aug 3 04:05:25 2007 -0500
824 Add Marvell 1149 PHY support to the TSEC
826 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
828 Date: Thu Aug 2 21:27:46 2007 +0200
830 Coding style cleanup, update CHANGELOG
834 commit 63e22764d2f8653f68888c667eb65b3996b52680
836 Date: Thu Aug 2 10:11:18 2007 +0200
838 Minor cleanup of <board>_nand build rules.
840 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
842 Date: Thu Aug 2 00:48:45 2007 +0200
844 Fix build errors and warnings / code cleanup.
848 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
850 Date: Fri Jul 27 14:43:59 2007 +0200
852 [ADS5121] Support for the ADS5121 board
854 The following MPC5121e subsystems are supported:
857 - NOR Boot Flash (common CFI driver)
867 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
869 Date: Fri Jul 27 14:22:04 2007 +0200
871 [PPC] Remove unused MSR_USER definition
875 commit cc3023b9f95d7ac959a764471a65001062aecf41
877 Date: Thu Jul 19 17:12:28 2007 +0200
879 Fix breakage of 8xx boards from recent commit.
881 This patch fixes the negative consequences for 8xx of the recent
882 "ppc4xx: Clean up 440 exceptions handling" commit.
886 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
888 Date: Sat Jul 14 22:51:02 2007 +0200
894 commit 011595307731a7a67a7445d107c279d031e8ab97
896 Date: Sat Jul 14 01:06:58 2007 +0200
898 [PCS440EP] - fix compile error, if BUILD_DIR is used
900 commit fad63407154f46246ce80d53a9c669a44362ac67
902 Date: Fri Jul 13 09:54:17 2007 +0200
904 make show_boot_progress () weak.
908 commit 907902472391b6ca1876ec300687562ecaf459b1
910 Date: Fri Jul 13 08:26:05 2007 +0200
912 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
913 - fix compile error, if BUILD_DIR is used
917 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
919 Date: Thu Jul 12 01:45:34 2007 +0200
921 Update CHANGELOG, minor coding style cleanup.
925 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
927 Date: Fri Jun 8 16:41:18 2007 -0500
929 Remove erroneous errata code from Marvel 88E1111S driver
931 The Marvel 88E1111S driver for the TSEC was copied from the
932 88E1101 driver, and included a fix for an erratum which does not
933 exist on that part. Now it is removed
937 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
939 Date: Tue Jun 5 16:38:44 2007 -0500
943 adds the reset register to 85xx immap
948 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
950 Date: Thu May 10 17:50:01 2007 -0500
952 Polished the 85xx ADS config files
954 Made the boot commands use device trees by default.
955 Also moved the ramdisk to 1000000 (I think the previous address
956 was getting overridden during boot).
960 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
962 Date: Wed May 9 11:03:32 2007 -0500
964 8544ds: Fix Makefile after moving pixis to board/freescale.
966 The OBJTREE != SRCTREE build scenario was broken.
972 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
974 Date: Wed May 9 00:54:20 2007 -0500
976 tsec: Fix PHY code to match first driver
978 Jarrold Wen noticed that the generic PHY code always matches
979 under the current implementation. Change it so the first match
980 wins, and *only* unknown PHYs trigger the generic driver
984 commit ccc091aac61a38cd998d575d92f7232e256d6312
986 Date: Tue May 8 17:27:43 2007 -0500
988 Add support for CPM device tree configuration to 8560 ADS
990 * Adds code to modify CPM frequencies
991 * Cleans up the config file to #define TSEC and (for now) #undef FCC
992 * Adds the MII command for all 8560 ADS configurations
993 * Updates config file to provide convenience commands for booting
999 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
1001 Date: Tue May 8 17:23:02 2007 -0500
1003 Fix Marvell 88e1145 PHY init code
1005 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
1006 where the reset was being done after the errata code instead of
1012 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
1014 Date: Wed Jul 11 14:52:16 2007 -0500
1016 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
1020 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
1022 Date: Wed Jul 11 14:52:08 2007 -0500
1024 pciauto setup bridge
1026 The P2P bridge bus numbers programmed into the device are relative to
1031 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
1033 Date: Wed Jul 11 14:52:01 2007 -0500
1035 Support PCIe extended config registers
1037 FSL PCIe block has extended cfg registers in the 100 and 400 range.
1038 For example, to read the LTSSM register: pci display <busn>.0 404 1
1042 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
1044 Date: Wed Jul 11 14:51:48 2007 -0500
1046 Minor improvements to drivers/pci_auto.c
1048 - Make pciauto_{pre,post}scan_setup_bridge non-static
1049 - Added physical address display in debug messages.
1053 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
1055 Date: Wed Jul 11 14:51:35 2007 -0500
1057 Start pci hose scan from hose->current_busno.
1059 Ensure hose->current_busno is not less than first_busno. This fixes
1060 broken board code which leaves current_busno=0 when first_busno is
1061 greater than 0 for the cases with multiple controllers.
1065 commit 3865b1fb7843a08ad49a6319a36415752276ff48
1067 Date: Wed Jul 11 12:13:53 2007 +0200
1069 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
1073 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
1075 Date: Wed Jul 11 20:11:07 2007 +0200
1077 CM1.QP1: Support for the Schindler CM1.QP1 board.
1082 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
1084 Date: Wed Jul 11 18:39:11 2007 +0200
1086 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
1087 - now the Flash ST M29W040B is supported (not tested)
1088 - fix the "led" command
1089 - fix compile error, if BUILD_DIR is used
1093 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
1095 Date: Sun Jul 8 13:44:27 2007 +0200
1097 Fix malloc problem introduced with the relocation fixup for the PPC platform
1099 The relocation fixup didn't handle the malloc pointer initialization
1100 correctly. This patch fixes this problem. Tested successfully on 4xx.
1101 The relocation fixup patches for 4xx will follow soon.
1105 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
1107 Date: Tue Jul 10 11:19:50 2007 -0500
1109 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
1111 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1112 Those always evaluated TRUE, and thus were always compiled
1113 even when IDE really wasn't defined/wanted.
1117 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
1119 Date: Tue Jul 10 11:13:21 2007 -0500
1121 drivers/: Remove lingering references to CFG_CMD_* symbols.
1123 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1124 Those always evaluated TRUE, and thus were always compiled
1125 even when IDE really wasn't defined/wanted.
1129 commit f40a7f3e3888b42a43674b099e5470022c8c544c
1131 Date: Tue Jul 10 11:07:56 2007 -0500
1133 fs/: Remove lingering references to CFG_CMD_* symbols.
1135 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1136 Those always evaluated TRUE, and thus were always compiled
1137 even when IDE really wasn't defined/wanted.
1141 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
1143 Date: Tue Jul 10 11:05:02 2007 -0500
1145 net/: Remove lingering references to CFG_CMD_* symbols.
1147 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1148 Those always evaluated TRUE, and thus were always compiled
1149 even when IDE really wasn't defined/wanted.
1153 commit 902531788376046da212afd1661cffb62f3daa1c
1155 Date: Tue Jul 10 11:02:44 2007 -0500
1157 common/: Remove lingering references to CFG_CMD_* symbols.
1159 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1160 Those always evaluated TRUE, and thus were always compiled
1161 even when IDE really wasn't defined/wanted.
1165 commit d39b57415838c73fb0a37eca84de3c68ba990586
1167 Date: Tue Jul 10 10:48:22 2007 -0500
1169 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
1171 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1172 Those always evaluated TRUE, and thus were always compiled
1173 even when IDE really wasn't defined/wanted.
1177 commit 77a318545d57aefa844752465b94c7e09a3f26d0
1179 Date: Tue Jul 10 10:39:10 2007 -0500
1181 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
1183 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1184 Those always evaluated TRUE, and thus were always compiled
1185 even when IDE really wasn't defined/wanted.
1189 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
1191 Date: Tue Jul 10 10:27:39 2007 -0500
1193 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
1197 commit 079a136c3588814784561d6e4856970ee82d6e2a
1199 Date: Tue Jul 10 10:12:10 2007 -0500
1201 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
1203 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1204 used to be included but CONFIG_BOOTP_MASK was not defined.
1206 Remove lingering references to CFG_CMD_* symbols.
1210 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
1212 Date: Tue Jul 10 09:38:02 2007 -0500
1214 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
1216 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1217 used to be included but CONFIG_BOOTP_MASK was not defined.
1219 Remove lingering references to CFG_CMD_* symbols.
1223 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
1225 Date: Tue Jul 10 09:29:01 2007 -0500
1227 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
1229 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1230 used to be included but CONFIG_BOOTP_MASK was not defined.
1232 Remove lingering references to CFG_CMD_* symbols.
1236 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
1238 Date: Tue Jul 10 09:22:23 2007 -0500
1240 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
1242 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1243 used to be included but CONFIG_BOOTP_MASK was not defined.
1245 Remove lingering references to CFG_CMD_* symbols.
1249 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
1251 Date: Tue Jul 10 09:10:49 2007 -0500
1253 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
1255 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1256 used to be included but CONFIG_BOOTP_MASK was not defined.
1258 Remove lingering references to CFG_CMD_* symbols.
1262 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
1264 Date: Tue Jul 10 09:02:57 2007 -0500
1266 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
1268 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1269 used to be included but CONFIG_BOOTP_MASK was not defined.
1271 Remove lingering references to CFG_CMD_* symbols.
1275 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
1277 Date: Mon Jul 9 22:08:34 2007 -0500
1279 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
1281 All of the choices for CONFIG_BOOTP_ are now documented in
1282 the README file. You must now individually select exactly
1283 the set that you want using a series of
1284 #define CONFIG_BOOTP_<x>
1285 statements in the board port config files now.
1289 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
1291 Date: Mon Jul 9 21:57:31 2007 -0500
1293 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1297 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
1299 Date: Mon Jul 9 21:48:26 2007 -0500
1301 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1305 commit 37d4bb70586659dedef1658ce1bed071be098aec
1307 Date: Mon Jul 9 21:38:02 2007 -0500
1309 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1313 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
1315 Date: Mon Jul 9 21:31:24 2007 -0500
1317 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1321 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
1323 Date: Mon Jul 9 21:24:19 2007 -0500
1325 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1329 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
1331 Date: Mon Jul 9 21:16:53 2007 -0500
1333 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1337 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
1339 Date: Mon Jul 9 19:12:30 2007 -0500
1341 Retire CONFIG_COMMANDS finally.
1342 Strip old CFG_CMD_* symbols out.
1346 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
1348 Date: Mon Jul 9 19:10:03 2007 -0500
1350 Update README.* to reference new CONFIG_CMD_* names now.
1354 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
1356 Date: Mon Jul 9 19:06:00 2007 -0500
1358 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
1362 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
1364 Date: Mon Jul 9 18:57:22 2007 -0500
1366 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
1370 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
1372 Date: Mon Jul 9 18:45:16 2007 -0500
1374 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
1378 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
1380 Date: Mon Jul 9 18:38:39 2007 -0500
1382 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
1386 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
1388 Date: Mon Jul 9 18:31:28 2007 -0500
1390 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
1394 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
1396 Date: Mon Jul 9 18:24:55 2007 -0500
1398 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
1402 commit fcec2eb93e126400009729328e797f12bc94f1fd
1404 Date: Mon Jul 9 18:19:09 2007 -0500
1406 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
1410 commit a593814f2be0c9cdc3133cd550b167b8a988328f
1412 Date: Mon Jul 9 18:10:50 2007 -0500
1414 rtc/: Remove obsolete references to CONFIG_COMMANDS
1418 commit 67350568f9d46e66c21829f3513b3db0caeb948b
1420 Date: Mon Jul 9 18:05:38 2007 -0500
1422 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
1426 commit 7def6b34f910f08d7ef0a14646da067719237ca2
1428 Date: Mon Jul 9 18:02:11 2007 -0500
1430 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
1434 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
1436 Date: Mon Jul 9 17:56:50 2007 -0500
1438 fs/: Remove obsolete references to CONFIG_COMMANDS
1442 commit c91898bbc505aff3e12a807af88e76da18efb7ee
1444 Date: Mon Jul 9 17:46:09 2007 -0500
1446 tools/: Remove obsolete references to CONFIG_COMMANDS
1450 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
1452 Date: Mon Jul 9 17:45:14 2007 -0500
1454 net/: Remove obsolete references to CONFIG_COMMANDS
1458 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
1460 Date: Mon Jul 9 17:39:42 2007 -0500
1462 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
1466 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
1468 Date: Mon Jul 9 17:30:01 2007 -0500
1470 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
1474 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
1476 Date: Mon Jul 9 17:22:37 2007 -0500
1478 disk/: Remove obsolete references to CONFIG_COMMANDS
1482 commit 639221c76c88215bd55af83ad174fc30d1940f8f
1484 Date: Mon Jul 9 17:15:49 2007 -0500
1486 include/: Remove obsolete references to CONFIG_COMMANDS
1487 Mostly removed from comments here.
1491 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
1493 Date: Tue Jul 10 00:01:28 2007 +0200
1495 Coding style cleanup; update CHANGELOG.
1499 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
1501 Date: Sun Jul 8 18:10:08 2007 -0500
1503 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
1507 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
1509 Date: Sun Jul 8 18:05:39 2007 -0500
1511 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
1515 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
1517 Date: Sun Jul 8 18:02:23 2007 -0500
1519 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
1523 commit baa26db4113679b80970ff447d91cc10217742a6
1525 Date: Sun Jul 8 17:51:39 2007 -0500
1527 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
1531 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
1533 Date: Sun Jul 8 17:02:01 2007 -0500
1535 Clear up confusion over the CMD_POST and POST_DIAG mess.
1537 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
1538 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
1539 Clear this mess up some.
1543 commit b3631487105a57ab7cbadfc26efbaf9676275018
1545 Date: Sun Jul 8 15:45:08 2007 -0500
1547 Remove references to the old cmd_confdefs.h include file.
1551 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
1553 Date: Sun Jul 8 15:42:59 2007 -0500
1555 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
1557 Use new CONFIG_CMD_* in lwmon5.h board config file.
1558 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
1562 commit a5562901661bd428f7e5feb333f796372cb81019
1564 Date: Sun Jul 8 15:31:57 2007 -0500
1566 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
1570 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
1572 Date: Sun Jul 8 15:02:44 2007 -0500
1574 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
1578 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
1580 Date: Sun Jul 8 15:12:40 2007 -0500
1582 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
1586 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
1588 Date: Sun Jul 8 14:55:07 2007 -0500
1590 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
1594 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
1596 Date: Sun Jul 8 14:49:44 2007 -0500
1598 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
1602 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
1604 Date: Sun Jul 8 14:21:43 2007 -0500
1606 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
1610 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
1612 Date: Sun Jul 8 14:14:17 2007 -0500
1614 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
1618 commit 348f258f24253433e4a2302a0bbceb6740a67246
1620 Date: Sun Jul 8 13:46:18 2007 -0500
1622 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
1626 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
1628 Date: Sun Jul 8 10:09:35 2007 -0500
1630 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
1634 commit 60a0876b5106b34220e459c208bbf648073306c0
1636 Date: Sat Jul 7 21:04:26 2007 -0500
1638 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
1642 commit dcaa71562826a2466e894c868d132509dcda8444
1644 Date: Sat Jul 7 20:56:05 2007 -0500
1646 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
1650 commit 3c3227f3c737502311b25b72084573901cbbf17d
1652 Date: Sat Jul 7 20:40:43 2007 -0500
1654 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
1658 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
1660 Date: Thu Jul 5 19:52:35 2007 -0500
1662 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
1666 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
1668 Date: Thu Jul 5 19:32:07 2007 -0500
1670 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
1674 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
1676 Date: Thu Jul 5 19:13:52 2007 -0500
1678 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
1680 Since ADS860.h includes "board/fads/fads.h" with ramifications
1681 on the CONFIG_COMMAND treatment, it too has to be adjusted to
1682 exclude already configured commands in this same commit.
1686 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
1688 Date: Fri Jul 6 09:45:47 2007 +0200
1690 Fix problem with get/setdcr commands introduced by cfg patches
1694 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
1696 Date: Fri Jul 6 02:50:19 2007 +0200
1698 Code cleanup and default config update for STC GP3 SSA board.
1702 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
1704 Date: Thu Jul 5 17:56:27 2007 +0200
1706 Fixing some typos etc. introduced mainly by cfg patches.
1710 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
1712 Date: Thu Jul 5 11:12:16 2007 +0200
1714 Minor coding style cleanup. Update CHANGELOG.
1716 commit dca3b3d6d6396b67e5e84af53452164923c73443
1718 Date: Wed Jul 4 22:33:46 2007 -0500
1720 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
1724 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
1726 Date: Wed Jul 4 22:33:38 2007 -0500
1728 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
1732 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
1734 Date: Wed Jul 4 22:33:30 2007 -0500
1736 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
1740 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
1742 Date: Wed Jul 4 22:33:23 2007 -0500
1744 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
1748 commit 26a34560d56a9df5bc2ae23525d9229736134757
1750 Date: Wed Jul 4 22:33:17 2007 -0500
1752 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
1756 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
1758 Date: Wed Jul 4 22:33:13 2007 -0500
1760 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
1764 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
1766 Date: Wed Jul 4 22:33:07 2007 -0500
1768 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
1772 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
1774 Date: Wed Jul 4 22:33:01 2007 -0500
1776 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
1780 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
1782 Date: Wed Jul 4 22:32:57 2007 -0500
1784 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
1788 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
1790 Date: Wed Jul 4 22:32:51 2007 -0500
1792 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
1796 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
1798 Date: Wed Jul 4 22:32:32 2007 -0500
1800 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
1804 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
1806 Date: Wed Jul 4 22:32:25 2007 -0500
1808 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
1812 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
1814 Date: Wed Jul 4 22:32:19 2007 -0500
1816 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
1820 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
1822 Date: Wed Jul 4 22:32:10 2007 -0500
1824 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
1828 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
1830 Date: Wed Jul 4 22:32:03 2007 -0500
1832 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
1836 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
1838 Date: Wed Jul 4 22:31:56 2007 -0500
1840 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
1844 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
1846 Date: Wed Jul 4 22:31:49 2007 -0500
1848 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
1852 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
1854 Date: Wed Jul 4 22:31:42 2007 -0500
1856 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
1860 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
1862 Date: Wed Jul 4 22:31:35 2007 -0500
1864 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
1868 commit d794cfefead5fc177cf4f41164e80382e9c9484a
1870 Date: Wed Jul 4 22:31:15 2007 -0500
1872 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
1876 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
1878 Date: Wed Jul 4 22:31:07 2007 -0500
1880 include/configs: Use new CONFIG_CMD_* in STx board config files.
1884 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
1886 Date: Wed Jul 4 22:30:58 2007 -0500
1888 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
1892 commit 2694690e285acaa34922f55f4b5ae030da60c55a
1894 Date: Wed Jul 4 22:30:50 2007 -0500
1896 include/configs: Use new CONFIG_CMD_* in TQM board config files.
1900 commit 1cc4c458329765b58e584a19821e796b3c10e976
1902 Date: Wed Jul 4 22:30:28 2007 -0500
1904 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
1908 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
1910 Date: Wed Jul 4 22:30:06 2007 -0500
1912 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
1916 commit b44896215a09c60fa40cae906f7ed207bbc2c492
1918 Date: Thu Jul 5 08:17:37 2007 +0200
1920 Merged POST framework with the current TOT.
1924 commit b24629fa377214d63bb40d1360e354b6d3e4af56
1926 Date: Wed Jun 13 13:23:15 2007 -0500
1928 mpc86xx: Remove old CFG_CMD_* references.
1932 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
1934 Date: Wed Jun 13 13:22:54 2007 -0500
1936 Add MPC8568MDS to MAKEALL 85xx target.
1938 It was missing from the original port submission.
1942 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
1944 Date: Wed Jun 13 13:22:08 2007 -0500
1946 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
1950 commit 56b304ac2091689506088a9ae67f63fd6300cf16
1952 Date: Wed Jun 13 13:21:37 2007 -0500
1954 Fix #if typo in CONFIG_CMD_* changes.
1958 commit f780b83316d9af1f61d71cc88b1917b387b9b995
1960 Date: Wed Jun 27 18:11:38 2007 +0200
1962 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
1966 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
1968 Date: Wed Jul 4 10:06:30 2007 +0200
1970 ppc4xx: Update lwmon5 board
1972 - Add optional ECC generation routine to preserve existing
1973 RAM values. This is needed for the Linux log-buffer support
1974 - Add optional DDR2 setup with CL=4
1975 - GPIO50 not used anymore
1976 - Lime register setup added
1980 commit 6810a34677dbc446334f5e451f1682426dd33b49
1982 Date: Tue Jul 3 00:17:28 2007 -0600
1984 Fix Makefile to use $(MKCONFIG) macro for all board ports
1988 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
1990 Date: Tue Jul 3 00:17:28 2007 -0600
1992 Fix Makefile to use $(MKCONFIG) macro for all board ports
1996 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
1998 Date: Tue Jul 3 00:34:49 2007 -0600
2000 Correct fixup relocation for mpc83xx
2004 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
2006 Date: Tue Jul 3 00:34:44 2007 -0600
2008 Correct fixup relocation for mpc8260
2012 commit f3a52fe05923935db86985daf9438e2f70ac39aa
2014 Date: Tue Jul 3 00:34:39 2007 -0600
2016 Correct fixup relocation for mpc824x
2020 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
2022 Date: Tue Jul 3 00:34:34 2007 -0600
2024 Correct fixup relocation for mpc8220
2028 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
2030 Date: Tue Jul 3 00:34:29 2007 -0600
2032 Correct fixup relocation for MPC5xxx
2036 commit 3649cd99ba815b6601868735765602f00ef3692b
2038 Date: Tue Jul 3 00:34:24 2007 -0600
2040 Correct relocation fixup for mpc5xx
2044 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
2046 Date: Tue Jul 3 00:34:19 2007 -0600
2048 Don't set gd->reloc_off if relocation of .fixup works correctly
2052 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
2054 Date: Tue Jul 3 00:34:14 2007 -0600
2056 Remove obsolete mpc83xx linker scripts
2060 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
2062 Date: Tue Jul 3 00:34:09 2007 -0600
2064 Consolidate mpc8260 linker scripts
2068 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
2070 Date: Tue Jul 3 00:34:04 2007 -0600
2072 Remove obsolete mpc824x linker scripts
2076 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
2078 Date: Tue Jul 3 00:33:59 2007 -0600
2080 Remove obsolete mpc824x linker scripts (3 of 4)
2084 commit a71c084f3ac7fedf144537db2b2da47323068833
2086 Date: Tue Jul 3 00:33:53 2007 -0600
2088 Remove obsolete mpc824x linker scripts (2 of 4)
2092 commit f670a15468d1365241d40022b9408e1004181f5e
2094 Date: Tue Jul 3 00:33:48 2007 -0600
2096 Remove obsolete mpc824x linker scripts (1 of 4)
2100 commit 09555bd45a04c0e54f172528d21bc18896550d28
2102 Date: Tue Jul 3 00:33:43 2007 -0600
2104 Remove obsolete mpc8220 linker scripts
2108 commit 5efb992f046e51225c93d52f80fecbe433abd789
2110 Date: Tue Jul 3 00:33:38 2007 -0600
2112 Remove obsolete mpc5xxx linker scripts (3 of 3)
2116 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
2118 Date: Tue Jul 3 00:33:33 2007 -0600
2120 Remove obsolete mpc5xxx linker scripts (2 of 3)
2124 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
2126 Date: Tue Jul 3 00:33:28 2007 -0600
2128 Remove obsolete mpc5xxx linker scripts (1 of 3)
2132 commit b7d8e05f8675249b5f208aa73babeed384a4519d
2134 Date: Tue Jul 3 00:33:23 2007 -0600
2136 Remove obsolete mpc5xx linker scripts
2140 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
2142 Date: Tue Jul 3 00:33:18 2007 -0600
2144 Consolidate mpc83xx linker scripts
2148 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
2150 Date: Tue Jul 3 00:33:13 2007 -0600
2152 Consolidate mpc8260 linker scripts
2156 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
2158 Date: Tue Jul 3 00:33:08 2007 -0600
2160 Consolidate mpc824x linker scripts
2164 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
2166 Date: Tue Jul 3 00:33:03 2007 -0600
2168 Consolidate mpc8220 linker scripts
2172 commit d181c9a15cd41863fe24840d17848429f27d3c8c
2174 Date: Tue Jul 3 00:32:58 2007 -0600
2176 Consolidate mpc5xxx linker scripts
2180 commit 287ac924adb7291bebe5086652a362a30ab28b13
2182 Date: Tue Jul 3 00:32:53 2007 -0600
2184 Consolidate mpc5xx linker scripts
2188 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
2190 Date: Wed Jul 4 00:43:53 2007 +0200
2192 Fix a few file permission problems.
2196 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
2198 Date: Wed Jul 4 00:38:38 2007 +0200
2200 Minor coding style cleanup. Rebuild CHANGELOG file.
2202 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
2204 Date: Mon Jun 11 19:03:44 2007 -0500
2206 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
2210 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
2212 Date: Mon Jun 11 19:03:39 2007 -0500
2214 README: Rewrite command line config to use CONFIG_CMD_* names.
2218 commit 72a074cec68e5bad60d63206c050974e08afd804
2220 Date: Mon Jun 11 19:03:34 2007 -0500
2222 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2224 This is a compatibility step that allows both the older form
2225 and the new form to co-exist for a while until the older can
2226 be removed entirely.
2228 All transformations are of the form:
2230 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2232 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2236 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
2238 Date: Mon Jun 11 19:03:28 2007 -0500
2240 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2242 This is a compatibility step that allows both the older form
2243 and the new form to co-exist for a while until the older can
2244 be removed entirely.
2246 All transformations are of the form:
2248 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2250 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2254 commit 9107ebe0d352420895ab69b715697bdebc8caf50
2256 Date: Mon Jun 11 19:03:23 2007 -0500
2258 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2260 This is a compatibility step that allows both the older form
2261 and the new form to co-exist for a while until the older can
2262 be removed entirely.
2264 All transformations are of the form:
2266 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2268 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2272 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
2274 Date: Mon Jun 11 19:03:19 2007 -0500
2276 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2278 This is a compatibility step that allows both the older form
2279 and the new form to co-exist for a while until the older can
2280 be removed entirely.
2282 All transformations are of the form:
2284 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2286 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2290 commit 737184114ec9c9e0ab94d6713536126073bd2472
2292 Date: Mon Jun 11 19:03:15 2007 -0500
2294 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2296 This is a compatibility step that allows both the older form
2297 and the new form to co-exist for a while until the older can
2298 be removed entirely.
2300 All transformations are of the form:
2302 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2304 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2308 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
2310 Date: Mon Jun 11 19:03:08 2007 -0500
2312 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2314 This is a compatibility step that allows both the older form
2315 and the new form to co-exist for a while until the older can
2316 be removed entirely.
2318 All transformations are of the form:
2320 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2322 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2326 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
2328 Date: Mon Jun 11 19:03:03 2007 -0500
2330 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2332 This is a compatibility step that allows both the older form
2333 and the new form to co-exist for a while until the older can
2334 be removed entirely.
2336 All transformations are of the form:
2338 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2340 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2344 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
2346 Date: Mon Jun 11 19:02:58 2007 -0500
2348 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2350 This is a compatibility step that allows both the older form
2351 and the new form to co-exist for a while until the older can
2352 be removed entirely.
2354 All transformations are of the form:
2356 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2358 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2362 commit 98b79003c21c2578206003256de4e781d6b36ca8
2364 Date: Mon Jun 11 19:02:53 2007 -0500
2366 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2368 This is a compatibility step that allows both the older form
2369 and the new form to co-exist for a while until the older can
2370 be removed entirely.
2372 All transformations are of the form:
2374 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2376 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2380 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
2382 Date: Mon Jun 11 19:02:49 2007 -0500
2384 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2386 This is a compatibility step that allows both the older form
2387 and the new form to co-exist for a while until the older can
2388 be removed entirely.
2390 All transformations are of the form:
2392 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2394 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2398 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
2400 Date: Mon Jun 11 19:02:34 2007 -0500
2402 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2404 This is a compatibility step that allows both the older form
2405 and the new form to co-exist for a while until the older can
2406 be removed entirely.
2408 All transformations are of the form:
2410 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2412 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2416 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
2418 Date: Mon Jun 11 19:02:20 2007 -0500
2420 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2422 This is a compatibility step that allows both the older form
2423 and the new form to co-exist for a while until the older can
2424 be removed entirely.
2426 All transformations are of the form:
2428 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2430 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2434 commit d5be43de93ff905c465e509d45a3164ef48d26e7
2436 Date: Mon Jun 11 19:02:10 2007 -0500
2438 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2440 This is a compatibility step that allows both the older form
2441 and the new form to co-exist for a while until the older can
2442 be removed entirely.
2444 All transformations are of the form:
2446 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2448 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2452 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
2454 Date: Mon Jun 11 19:02:05 2007 -0500
2456 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2458 This is a compatibility step that allows both the older form
2459 and the new form to co-exist for a while until the older can
2460 be removed entirely.
2462 All transformations are of the form:
2464 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2466 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2470 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
2472 Date: Mon Jun 11 19:01:54 2007 -0500
2474 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2476 This is a compatibility step that allows both the older form
2477 and the new form to co-exist for a while until the older can
2478 be removed entirely.
2480 All transformations are of the form:
2482 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2484 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2488 commit a76adc8142c1d956385a109e0b70f9319ede4d66
2490 Date: Mon Jun 11 19:01:43 2007 -0500
2492 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2494 This is a compatibility step that allows both the older form
2495 and the new form to co-exist for a while until the older can
2496 be removed entirely.
2498 All transformations are of the form:
2500 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2502 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2506 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
2508 Date: Mon Jun 11 19:01:34 2007 -0500
2510 Introduce initial versions of new Command Config files.
2512 Derive three new files from cmd_confdefs.h:
2513 config_bootp.h - Has BOOTP related config options, not commands
2514 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
2515 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
2517 For now, include "config_bootp.h" for compatability until all
2518 users of it directly include it properly.
2522 commit 1f2a05898658900dc5717761e27abf2052e67e13
2524 Date: Sat Jun 30 18:50:48 2007 +0200
2530 commit a5d71e290f3673269be8eefb4ec44f53412f9461
2532 Date: Mon Jun 25 19:11:37 2007 +0200
2534 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
2538 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
2540 Date: Mon Jun 25 17:03:13 2007 +0200
2542 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
2544 This patch prints the DDR status registers upon machine check
2545 interrupt on the 440EPx/GRx. This can be useful especially when
2546 ECC support is enabled.
2548 I added some small changes to the original patch from Niklaus to
2549 make it compile clean.
2554 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
2556 Date: Mon Jun 25 16:50:55 2007 +0200
2558 ppc4xx: Fix O=buildir builds
2560 This patch fixes the problem to assemble cpu/ppc4xx/start.S
2561 experienced last week where building failed having specified
2566 commit 466fff1a7bb5fe764a06450626f6098219f446b8
2568 Date: Mon Jun 25 15:57:39 2007 +0200
2570 ppc4xx: Add pci_pre_init() for 405 boards
2572 This patch removes the CFG_PCI_PRE_INIT option completely, since
2573 it's not needed anymore with the patch from Matthias Fuchs with
2574 the "weak" pci_pre_init() implementation.
2578 commit 6f35c53166213c24a5a0e2390ed861136ff73870
2580 Date: Sun Jun 24 17:41:21 2007 +0200
2582 ppc4xx: Maintenance patch for esd's CPCI405 derivats
2584 -add pci_pre_init() for pci interrupt fixup code
2585 -disable phy sleep mode via reset_phy() function
2586 -use correct io accessors
2591 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
2593 Date: Sun Jun 24 17:23:41 2007 +0200
2595 ppc4xx: Add pci_pre_init() for 405 boards
2597 This patch adds support for calling a plattform dependant
2598 pci_pre_init() function for 405 boards. This can be used to
2599 move the current pci_405gp_fixup_irq() function into the
2602 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
2603 A default function with 'weak' attribute is used when
2604 a board specific pci_pre_init() is not implemented.
2608 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
2610 Date: Fri Jun 22 23:59:00 2007 +0200
2612 Coding stylke cleanup; rebuild CHANGELOG
2614 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
2616 Date: Wed Apr 18 14:55:19 2007 +0400
2618 Adapt log buffer code to support Linux 2.6
2620 A new environment variable, "logversion", selects the log buffer
2621 behaviour. If it is not set or set to a value other than 2, then the
2622 old, Linux 2.4.4, behaviour is selected.
2627 commit a11e06965ec91270c51853407ff1261d3c740386
2629 Date: Wed Mar 28 19:06:19 2007 +0400
2631 Extend POST support for PPC440
2633 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
2638 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
2640 Date: Fri Jun 22 19:11:54 2007 +0200
2642 [PCS440EP] upgrade the PCS440EP board:
2643 - Show on the Status LEDs, some States of the board.
2644 - Get the MAC addresses from the EEProm
2646 - use the CF on the board.
2647 - check the U-Boot image in the Flash with a SHA1
2649 - use dynamic TLB entries generation for the SDRAM
2653 commit 3a1f5c81b0b9557817a789bece839905581c2205
2655 Date: Fri Jun 22 16:58:40 2007 +0200
2657 ppc4xx: Fix problem with extended program_tlb() funtion
2659 The recently extended program_tlb() function had a problem when
2660 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
2661 virtual address was not incremented. This patch fixes this issue
2662 and is tested on Katmai with 512MB SDRAM.
2666 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
2668 Date: Fri Jun 22 14:58:04 2007 +0200
2670 [ppc] Fix build breakage for all non-4xx PowerPC variants.
2672 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
2675 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
2677 Date: Wed Jun 20 18:14:24 2007 +0200
2679 Coding style cleanup. Refresh CHANGELOG.
2681 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
2683 Date: Tue Jun 19 17:22:44 2007 +0200
2685 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
2687 This patch adds a board command to configure the I2C bootstrap EEPROM
2688 values. Right now 533 and 667MHz are supported for booting either via NOR
2689 or NAND FLASH. Here the usage:
2691 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
2692 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
2696 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
2698 Date: Tue Jun 19 16:42:31 2007 +0200
2700 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
2702 The latest changes showed a problem with the location of the NAND-SPL
2703 image in the OCM and the init-data area (incl. cache). This patch
2708 commit 86ba99e34194394052d24c04dc40d1263d29a26f
2710 Date: Tue Jun 19 16:40:58 2007 +0200
2712 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
2716 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
2718 Date: Fri Jun 15 11:33:41 2007 +0200
2720 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
2722 Now CONFIG_440 has to be defined in all PPC440 board config files.
2726 commit efa35cf12d914d4caba942acd5a6c45f217de302
2728 Date: Fri Jun 15 11:19:28 2007 +0200
2730 ppc4xx: Clean up 440 exceptions handling
2732 - Introduced dedicated switches for building 440 and 405 images required
2733 for 440-specific machine instructions like 'rfmci' etc.
2735 - Exception vectors moved to the proper location (_start moved away from
2736 the critical exception handler space, which it occupied)
2738 - CriticalInput now serviced (with default handler)
2740 - MachineCheck properly serviced (added a dedicated handler and return
2743 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
2744 unhandled and those not relevant for 4xx were eliminated)
2746 - Eliminated Linux leftovers, removed dead code
2752 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
2754 Date: Fri Jun 15 08:18:01 2007 +0200
2756 [ppc4xx] Add initial lwmon5 board support
2758 This patch adds initial support for the Liebherr lwmon5 board euqipped
2759 with an AMCC 440EPx PowerPC.
2763 commit 85f737376d5ff3d5f0d45a8b657686326d175307
2765 Date: Fri Jun 15 07:39:43 2007 +0200
2767 [ppc4xx] Extend 44x GPIO setup with default output state
2769 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
2770 is extended with the default GPIO output state (level).
2774 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
2776 Date: Thu Jun 14 11:14:32 2007 +0200
2778 [ppc4xx] Extend program_tlb() with virtual & physical addresses
2780 Now program_tlb() allows to program a TLB (or multiple) with
2781 different virtual and physical addresses. With this change, now one
2782 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
2783 diabled and once with caches enabled.
2787 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
2789 Date: Wed May 23 19:02:41 2007 +0200
2791 Change 'repeatable' attribute of some commands to sensible values.
2793 Most prominently this changes 'erase' to be non-repeatable.
2797 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
2799 Date: Wed May 23 18:47:48 2007 +0200
2801 Fix 'run' not to continue after interrupted command
2805 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
2807 Date: Mon Jun 11 15:14:24 2007 +0200
2809 USB: This patch fix readl in ohci swap reg access.
2813 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
2815 Date: Fri Jun 8 14:52:22 2007 +0200
2817 TQM5200: Add Flat Device Tree support, update default env. accordingly.
2822 commit 9045f33c023f698660a2e45d1b2194c0711abebc
2824 Date: Fri Jun 8 10:24:58 2007 +0200
2826 Fix config problems on SC3 board; make ide_reset_timeout work.
2828 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
2830 Date: Fri Jun 8 09:55:24 2007 +0200
2832 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
2834 Set the correct value in GPIOx_TCR when configuring the gpio
2835 with CFG_440_GPIO_TABLE.
2840 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
2842 Date: Wed Jun 6 16:26:56 2007 +0200
2844 Coding Style cleanup; generate new CHANGELOG file.
2848 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
2850 Date: Wed Jun 6 11:49:44 2007 +0200
2852 TRAB, USB: update trab board configuration for use of generic ohci driver
2854 commit dace45acd1c1357daa9322099d07c9a9e08b0024
2856 Date: Wed Jun 6 11:49:43 2007 +0200
2858 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
2860 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
2862 Date: Wed Jun 6 11:49:43 2007 +0200
2864 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
2866 commit fc43be478f2aa37ce38acd85355038866e4162af
2868 Date: Wed Jun 6 11:49:35 2007 +0200
2870 USB/OHCI: endianness cleanup in the generic ohci driver
2872 commit c440bfe6d6d92d66478a7e84402b31f48413617b
2874 Date: Wed Jun 6 11:42:13 2007 +0200
2876 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
2878 This patch adds NAND booting support for the AMCC Acadia eval board.
2880 Please make sure to configure jumper J7 to position 2-3 when booting
2881 from NOR, and to position 1-2 when booting for NAND.
2883 I also added a board command to configure the I2C bootstrap EEPROM
2884 values. Right now only 267MHz is support for booting either via NOR
2885 or NAND FLASH. Here the usage:
2887 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
2888 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
2892 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
2894 Date: Wed Jun 6 10:08:14 2007 +0200
2896 Files include/linux/byteorder/{big,little}_endian.h define
2897 __BIG_ENDIAN and __LITTLE_ENDIAN.
2901 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
2903 Date: Wed Jun 6 10:08:14 2007 +0200
2905 Add USB PCI-OHCI, USB keyboard and event poll support to the
2906 MPC8641HPCN board config file.
2910 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
2912 Date: Wed Jun 6 10:08:14 2007 +0200
2914 USB PCI-OHCI, interrupt pipe and usb event poll support
2916 This patch added USB PCI-OHCI chips support, interrupt pipe support
2917 and usb event poll support. For supporting the USB interrupt pipe, the
2918 globe urb_priv is moved to purb in ed struct. Now, we can process
2919 several urbs at one time. The interrupt pipe support codes are ported
2920 from Linux kernel 2.4.
2924 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
2926 Date: Wed Jun 6 10:08:13 2007 +0200
2928 USB event poll support
2930 This patch adds USB event poll support, which could be used in usbkbd
2931 and other usb devices driver when the asynchronous interrupt
2932 processing is supported.
2936 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
2938 Date: Wed Jun 6 10:08:12 2007 +0200
2940 ISP116x: delay for crappy USB keys
2942 Using some (very) slow USB keys cause the USB host controller buffers
2943 are not ready to be read by the CPU so we need an extra delay before
2944 reading the USB storage data.
2948 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
2950 Date: Wed Jun 6 10:08:12 2007 +0200
2952 Change duplicate usb_cpu_init_fail to usb_board_init_fail
2959 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
2961 Date: Tue Jun 5 12:30:52 2007 -0500
2963 mpc8641 image size cleanup
2965 e600 does not have a bootpg restriction.
2966 Move the version string to beginning of image at fff00000.
2967 Resetvec.S is not needed.
2968 Update flash copy instructions.
2969 Add tftpflash env variable
2974 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
2976 Date: Mon Jun 4 08:36:05 2007 +0200
2978 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
2980 The attached patch is mainly cosmetic, allowing u-boot to
2981 display the correct bootstrap option letter according to the
2984 The original patch was extended with 405EZ support by Stefan
2990 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
2992 Date: Wed May 23 12:45:19 2007 +0400
2994 fix compilation problem for mpc8349itx CFG_RAMBOOT
2996 Current include/configs/MPC8349ITX.h does contain some support for building
2997 image that will be started from memory (without putting in into flash).
2998 It could be triggered by building with TEXT_BASE set to a low value.
3000 However, this support is incomplete: using of low TEXT_BASE causes
3001 defining configuration macros in inconsistent way, which later leads
3002 to compilation errors. In particular. flash support is being disabled,
3003 but then flash structures get referenced.
3005 This patch fixes this, making it possible to build with low TEXT_BASE.
3011 commit 8a364f0970de49949d635e60accf463c6443ef8c
3013 Date: Wed May 23 12:45:25 2007 +0400
3015 add missing 'console' var to default mpc8349itx config
3019 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
3021 Date: Fri Jun 1 16:18:17 2007 +0200
3023 ppc4xx: Add missing file for Bamboo NAND booting support
3027 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
3029 Date: Fri Jun 1 15:58:19 2007 +0200
3031 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
3033 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
3034 suggested by AMCC it is not recommended to dynamically change the EBC
3035 speed after bootup. So we undo this change to be on the safe side.
3039 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
3041 Date: Fri Jun 1 15:29:04 2007 +0200
3043 ppc4xx: Update Sequoia NAND booting support with ECC
3047 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
3049 Date: Fri Jun 1 15:27:11 2007 +0200
3051 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
3053 This patch adds NAND booting support for the AMCC Bamboo eval board.
3054 Since the NAND-SPL boot image is limited to 4kbytes, this version
3055 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
3056 supported, since the setup code for I2C DIMM autodetection and
3057 configuration is too big for this NAND bootloader.
3061 commit 42be56f53c8b107868e6125c8524ae84293e95a7
3063 Date: Fri Jun 1 15:23:04 2007 +0200
3065 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
3067 The U-Boot NAND booting support is now extended to support ECC
3068 upon loading of the NAND U-Boot image.
3070 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
3074 commit a471db07fbb65a841ffc9f4f112562b945230f98
3076 Date: Fri Jun 1 15:19:29 2007 +0200
3078 ppc4xx: Prepare Bamboo port for NAND booting support
3080 This patch updates the "normal" Bamboo NOR booting port, so
3081 that it is compatible with the coming soon NAND booting
3084 It also enables the 2nd NAND flash on the Bamboo.
3088 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
3090 Date: Fri Jun 1 15:16:58 2007 +0200
3092 ppc4xx: Update in_be32() functions and friends to latest Linux version
3096 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
3098 Date: Fri Jun 1 15:15:12 2007 +0200
3100 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
3102 This patch adds hardware ECC support to the NDFC driver. It also
3103 changes the register access from using the "simple" in32/out32
3104 functions to the in_be32/out_be32 functions, which make sure
3105 that the access is correctly synced. This is the only recommended
3106 access to SoC registers in the current Linux kernel.
3110 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
3112 Date: Fri Jun 1 15:12:15 2007 +0200
3114 NAND: Update nand_ecc.c to latest Linux version
3116 This patch updates the nand_ecc code to the latest Linux version.
3117 The main reason for this is the more compact code. This makes
3118 it possible to include the ECC code into the NAND bootloader
3119 image (NAND_SPL) for PPC4xx.
3123 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
3125 Date: Fri Jun 1 15:09:50 2007 +0200
3127 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
3131 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
3133 Date: Fri Jun 1 13:45:24 2007 +0200
3135 ppc4xx: Change Luan config file to support ECC
3137 With the updated 44x DDR2 driver the Luan board now supports
3138 ECC generation and checking.
3142 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
3144 Date: Fri Jun 1 13:45:00 2007 +0200
3146 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
3148 Add config option for 180 degree advance clock control as needed
3149 for the AMCC Luan eval board.
3153 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
3155 Date: Thu May 31 17:20:09 2007 +0200
3157 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
3161 commit 7049288fb1f16f1b317140226cdebd07bd416395
3163 Date: Sun May 27 17:26:46 2007 +0200
3165 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
3169 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
3171 Date: Sun May 27 17:06:36 2007 +0200
3173 Motion-PRO: Add support for redundant environment.
3175 Enable redundant environment, add a MTD partition for it; also add env.
3176 variable command for passing MTD partitions to the kernel command line.
3181 commit a26eabeec31746f06d309103690892805696e344
3183 Date: Sun May 27 17:05:11 2007 +0200
3185 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
3187 Allow passing longer command line to the kernel - useful especially
3188 for passing MTD partition layout.
3193 commit 9160b96f71483a116de81c68985e8ee306d36764
3195 Date: Sun May 27 17:04:18 2007 +0200
3197 Fix: Add missing NULL termination in strings expanded by macros parser.
3202 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
3204 Date: Sun May 27 17:03:37 2007 +0200
3206 Motion-PRO: Update EEPROM's page write bits and write delay.
3208 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
3209 have a page write capability of two bytes", and "This device offers fast (1ms)
3210 byte write". Add 3ms of extra delay.
3215 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
3217 Date: Sun May 27 16:58:45 2007 +0200
3219 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
3221 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
3222 networking does not function. This commit switches PHY to TX mode by clearing
3223 the FX_SEL bit of Mode Control Register. It also reverses commit
3224 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
3229 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
3231 Date: Sun May 27 16:57:15 2007 +0200
3233 Motion-PRO: Add support for the temperature sensor.
3238 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
3240 Date: Sun May 27 16:55:23 2007 +0200
3242 Motion-PRO: Add displaying of CPLD revision information during boot.
3247 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
3249 Date: Sun May 27 16:53:43 2007 +0200
3251 MPC5xxx: Change names of defines related to IPB and PCI clocks.
3253 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
3254 them does not cause PCI or IPB clocks to run at the specified speed.
3255 Instead, they configure divisors used to calculate said clocks. This
3256 patch renames the defines according to their real function.
3261 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
3263 Date: Sun May 27 16:51:48 2007 +0200
3265 Motion-PRO: Add LED support.
3271 commit d756894722c888d09a9fa1df8323753772d3dcce
3273 Date: Thu May 24 09:49:00 2007 +0200
3275 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
3278 fixes a small bug in the 405EZ OCM initialization. Thanks for
3283 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
3285 Date: Thu May 24 08:22:09 2007 +0200
3287 ppc4xx: Update AMCC Acadia support for board revision 1.1
3289 This patch updates the Acadia (405EZ) support for the new 1.1 board
3290 revision. It also adds support for NAND FLASH via the 4xx NDFC.
3292 Please note that the jumper J7 must be in position 2-3 for this
3293 NAND support. Position 1-2 is for NAND booting only. NAND booting
3294 support will follow later.
3298 commit 822d55365bb557e084d0e33625a6dedcc866110b
3300 Date: Wed May 23 14:09:46 2007 -0500
3302 Add LIST_86xx MAKEALL target for PowerPC builds.
3306 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
3308 Date: Tue May 22 12:48:09 2007 +0200
3310 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
3314 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
3316 Date: Tue May 22 12:46:10 2007 +0200
3318 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
3320 This patch adds support for 405 PPC's to the 4xx NAND driver
3321 ndfc.c. This is in preparation for the new AMCC 405EZ.
3325 commit 10603d76767426be803dadd4fb688b97eb69481c
3327 Date: Mon May 21 07:41:22 2007 +0200
3329 ppc4xx: Fix problem in 405EZ OCM initialization
3331 As spotted by Bruce Adler this patch fixes an initialization problem
3336 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
3338 Date: Fri May 18 16:47:03 2007 +0100
3340 Reduce line lengths to 80 characters max.
3342 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
3344 Date: Fri May 18 14:34:07 2007 +0100
3346 Makefile permissions
3348 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
3350 Date: Fri May 18 14:33:11 2007 +0100
3352 Makefile permissions
3354 commit 255a3577c848706441daee0174543efe205a77f8
3356 Date: Wed May 16 16:52:19 2007 -0500
3358 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
3360 For all practical u-boot purposes, TSECs don't differ throughout the
3361 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
3365 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
3367 Date: Wed May 16 14:49:12 2007 +0200
3369 Fix compile problem cause my Microblaze merge
3373 commit ada4697d0230d6da552867777f98a67ec3ba2579
3375 Date: Wed May 16 13:23:10 2007 +0200
3377 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
3379 Because the Sequoia board does not boot with an EBC faster than 66MHz,
3380 the clock divider are changed after the initial boot process.
3382 This allows for maximum clocking speeds to be achieved on newer boards.
3383 Sequoia boards with 666.66 MHz processors require that the EBC divider
3384 be set to 3 in order to start the initial boot process at a slower EBC
3385 speed. After the initial boot process, the divider can be set back to 2,
3386 which will cause the boards to run at 83.333MHz. This is backward
3387 compatible with boards with 533.33 MHz processors, as these boards will
3388 already be set with an EBC divider of 2.
3392 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
3394 Date: Wed May 16 01:16:53 2007 +0200
3396 Minor Coding Style cleanup, update CHANGELOG.
3400 commit d62f64cc23a940eafe712c776b3249e4160753d1
3402 Date: Wed May 16 00:13:33 2007 +0200
3404 Coding Style Cleanup, new CHANGELOG
3406 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
3408 Date: Tue May 15 23:38:05 2007 +0200
3410 Minor coding style cleanup.
3412 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
3414 Date: Fri Apr 20 14:23:02 2007 +0530
3416 Add driver for S-ATA-controller on Intel processors with South
3417 Bridge, ICH-5, ICH-6 and ICH-7.
3421 1. Code is divided in to two files. All functions, which are
3422 controller specific are kept in "drivers/ata_piix.c" file and
3423 functions, which are not controller specific, are kept in
3424 "common/cmd_sata.c" file.
3426 2. Reading and Writing from the S-ATA drive is done using PIO method.
3428 3. Driver can be configured for 48-bit addressing by defining macro
3429 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
3432 4. S-ATA read function is hooked to the File system, commands like
3433 ext2ls and ext2load file can be used. This has been tested.
3435 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
3436 controller and identifies the S-ATA drives connected to it.
3438 6. U-Boot command "sata" is added, which is used to read/write, print
3439 partition table and get info about the drives present. This I have
3440 implemented in same way as "ide" command is implemented in U-Boot.
3442 7. This driver is for S-ATA in native mode.
3444 8. This driver does not support the Native command queuing and
3449 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
3451 Date: Mon Apr 30 15:57:22 2007 +0530
3453 Fixes bug clearing the bss section for i386
3456 There is a bug in the code of clearing the bss section for processor
3457 i386.(File: cpu/i386/start.S)
3458 In the code, bss_start addr (starting addr of bss section) is put into
3459 the register %eax, but the code which clears the bss section refers to
3460 the addr pointed by %edi.
3462 This patch fixes this bug by putting bss_start into %edi register.
3466 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
3468 Date: Mon Apr 30 16:47:28 2007 -0500
3470 Add support for BCM5464 Quad Phy
3472 Added support for Broadcom's BCM5464 Quad Phy
3476 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
3478 Date: Wed May 9 08:10:57 2007 +0800
3480 Search the exception table with linear algorithm
3482 Search the exception table with linear algorithm instead of
3483 bisecting algorithm.
3484 Because the exception table might be unsorted.
3488 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
3490 Date: Mon May 14 11:47:35 2007 +0800
3492 Fix compilation issues on MACOSX
3497 commit 56fd7162985c412317bbf763a225fba23c64fd31
3499 Date: Tue May 15 07:55:42 2007 -0700
3501 Fix for compile of JSE target
3503 The attached patch fixes the compile of the JSE board in the
3504 denx git as of 14 may 2007. It is an extremely simple patch,
3505 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
3507 Fix to compile JSE against 20070514 git of u-boot
3509 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
3511 Date: Fri May 11 12:01:49 2007 +0200
3513 ppc4xx: Add mtcpr/mfcpr access macros
3517 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
3519 Date: Fri May 11 12:01:06 2007 +0200
3521 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
3525 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
3527 Date: Thu May 10 16:55:52 2007 +0200
3529 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
3532 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
3534 Date: Wed May 9 11:42:44 2007 +0100
3536 Add the board directory for SMN42
3538 commit 160131bf965785419626df6c388729fe0b597992
3540 Date: Wed May 9 11:41:58 2007 +0100
3542 Add the files for the SMN42 board
3544 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
3546 Date: Wed May 9 11:40:34 2007 +0100
3548 Remove the deleted files for the SMN42 patch
3550 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
3552 Date: Wed May 9 11:37:56 2007 +0100
3554 New board SMN42 branch
3556 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
3558 Date: Wed May 9 10:24:38 2007 +0100
3560 Makefile permissions
3562 commit b84289b595731e8851df46e893845cc1322c9b9b
3564 Date: Tue May 8 14:17:07 2007 -0500
3566 8641hpcn: Fix Makefile after moving pixis to board/freescale.
3568 The OBJTREE != SRCTREE build scenario was broken.
3574 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
3576 Date: Tue May 8 15:57:43 2007 +0200
3578 add: reading special purpose registers
3580 commit 1a50f164beb065f360fbddb76029607d6b099698
3582 Date: Tue May 8 14:52:52 2007 +0200
3584 add: Microblaze V5 exception handling
3586 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
3588 Date: Tue May 8 14:39:11 2007 +0200
3590 add: FSL control read and write
3592 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
3594 Date: Tue May 8 13:05:44 2007 +0200
3596 [Motion-PRO] Add support for I2C, EEPROM and RTC.
3598 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
3600 Date: Tue May 8 10:23:56 2007 +0200
3602 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
3605 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
3607 Date: Tue May 8 09:39:12 2007 +0200
3609 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
3610 eliminates networking problems in Linux (timeouts).
3612 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
3614 Date: Tue May 8 09:21:57 2007 +0200
3616 [Motion-PRO] Enable Flat Device Tree support and modify default environment
3617 to allow booting of FDT-expecting kernels.
3619 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
3621 Date: Mon May 7 23:58:31 2007 +0200
3623 new: USE_MSR_INTR support
3625 commit 008861a2f3ef2c062744d733787c7e530a1b8761
3627 Date: Mon May 7 22:36:15 2007 +0200
3629 [MPC5xxx] There are networking problems on the Motion-PRO board with
3630 current PHY initalization code (tftp timeouts all the time). This commit
3631 temporarily disables PHY initalization sequence to make the networking
3632 operational, until a fix is found.
3634 commit abca901869c3760b6c5fecb825db6c1d91a78a93
3636 Date: Mon May 7 22:10:36 2007 +0200
3638 Get rid of duplicated file (see include/configs/sbc8560.h instead)
3642 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
3644 Date: Mon May 7 22:07:08 2007 +0200
3646 Get rid of duplicated file (see doc/README.SBC8560 instead)
3650 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
3652 Date: Mon May 7 19:43:10 2007 +0200
3654 fix: read and write MSR - repair number of parameters
3656 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
3658 Date: Mon May 7 19:42:49 2007 +0200
3660 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
3662 A '3' got cut off in the formatting of the last patch to automatically
3663 change the clock speed of the system clock on sequoia board.
3668 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
3670 Date: Mon May 7 19:33:51 2007 +0200
3672 new: fsl interrupt support
3673 FSL_Has_data is connected to INTC.
3675 commit 792032baa7d625e34c981ab6df521911bd8dc861
3677 Date: Mon May 7 19:30:12 2007 +0200
3679 fix: interrupt handler
3682 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
3684 Date: Mon May 7 19:25:08 2007 +0200
3686 fix: remove asm code
3688 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
3690 Date: Mon May 7 19:12:43 2007 +0200
3692 fix: clean interrupt
3694 commit 42efed6130c8fcf7da881385b5427065d2801757
3696 Date: Mon May 7 17:22:25 2007 +0200
3698 fix: interrupt handler for multiple sources
3700 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
3702 Date: Mon May 7 17:11:09 2007 +0200
3704 new: add writing to msr register
3706 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
3708 Date: Mon May 7 16:43:56 2007 +0200
3710 Fix an ancient CHANGELOG conflict
3712 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
3714 Date: Sat May 5 08:12:30 2007 +0200
3716 5xxx: write MAC address to mac-address and local-mac-address
3718 Some device trees have a mac-address property, some have local-mac-address,
3719 and some have both. To support all of these device trees, ftp_cpu_setup()
3720 should write the MAC address to mac-address and local-mac-address, if they
3726 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
3728 Date: Sun Apr 29 14:01:54 2007 +0200
3730 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
3732 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
3733 message. Use PVR to distinguish between the two variants, and print proper CPU
3740 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
3742 Date: Wed Apr 25 16:01:26 2007 +0200
3744 [PATCH] simplify silent console
3749 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
3751 Date: Mon Apr 23 15:30:39 2007 +0200
3753 [PATCH] Avoid assigning PCI resources from zero address
3755 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
3756 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
3757 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
3758 sentence about "0" being considered an invalid address) -- so, use a reasonable
3759 starting value of 0x1000 (that's what the most Linux archs are using).
3761 Alternatively, one might have fixed the calls to pci_set_region() individually
3762 (some code even seems to have taken care of this issue) but that would have
3763 been a lot more work. :-)
3768 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
3770 Date: Mon Apr 23 14:00:11 2007 +0200
3772 [patch] setenv(...) can delete environmentalvariables
3774 update setenv() function so that entering a NULL value for the
3775 variable's value will delete the environmental variable
3780 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
3782 Date: Mon Apr 23 13:54:24 2007 +0200
3784 [patch] use unsigned char in smc91111 driver for mac
3786 the v_mac variable in the smc91111 driver is declared as a signed char ...
3787 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
3788 because when it gets printed out, you get a display like:
3789 0xFFFFFFE0 and that's no good
3793 commit ffc50f9bb194343c6303517a517708457a5eb6b8
3795 Date: Sat May 5 18:54:42 2007 +0200
3797 new: FSL and MSR support #2
3799 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
3801 Date: Sat May 5 18:27:16 2007 +0200
3803 new: FSL and MSR support
3805 commit 2f15278c2eb911c668b4fe562130b78cf554d139
3807 Date: Sat May 5 18:23:11 2007 +0200
3809 Coding stylke cleanup; update CHANGELOG.
3813 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
3815 Date: Sat May 5 18:05:02 2007 +0200
3817 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
3821 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
3823 Date: Sat May 5 17:15:50 2007 +0200
3825 Make "file" command happy with some config.mk files; update CHANGELOG
3827 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
3829 Date: Sat May 5 08:32:14 2007 +0200
3831 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
3833 The AMCC Secquoia board has been changed in a new revision from using a
3834 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
3835 indicates the difference. This patch reads that bit and uses the correct
3836 clock speed for the board. This code is backward compatable will all
3837 prior boards. All prior boards will be read as 33.000.
3842 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
3844 Date: Sat May 5 08:29:01 2007 +0200
3846 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
3848 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
3849 for the 4k NAND boot image so define bus_frequency to 133MHz here
3850 which is save for the refresh counter setup.
3854 commit 2f550ab976405300f5b07bf2890800840d0aa05f
3856 Date: Sat May 5 08:12:30 2007 +0200
3858 5xxx: write MAC address to mac-address and local-mac-address
3860 Some device trees have a mac-address property, some have local-mac-address,
3861 and some have both. To support all of these device trees, ftp_cpu_setup()
3862 should write the MAC address to mac-address and local-mac-address, if they
3868 commit a79886590593ba1d667c840caa4940c61639f18f
3870 Date: Sat May 5 07:04:42 2007 +0200
3872 NAND: Wrong calculation of page number in nand_block_bad()
3874 In case that there is no memory based bad block table available the
3875 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
3876 nand_block_bad() directly. When parameter 'getchip' is set to zero,
3877 nand_block_bad() will not right shift the offset to calculate the
3878 correct page number.
3883 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
3885 Date: Fri May 4 10:02:33 2007 +0200
3887 Fix initrd length corruption in bootm command.
3889 When using FDT Images, the length of an inital ramdisk was
3890 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
3892 Patches by Timur Tabi & Johns Daniel.
3896 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
3898 Date: Thu May 3 19:43:52 2007 -0500
3900 mpc83xx: fix trivial error in MAKEALL
3904 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
3906 Date: Thu May 3 16:34:41 2007 +0200
3908 Update board configuration for STX GP3SSA board:
3910 Enable hush shell, environment in flash rather in EEPROM,
3911 more user-friendly default environment, etc.
3912 The simple EEPROM environment can be selected easily in the board
3917 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
3919 Date: Tue Apr 24 14:37:49 2007 +0200
3921 Cleanup STX GP3SSA code; fix build and compile problems.
3923 commit 35171dc04e028ecacc23ad916a66295472555dbf
3925 Date: Fri Jan 5 09:15:34 2007 +0100
3927 Add support for STX GP3SSA (stxssa) Board
3931 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
3933 Date: Sat Feb 24 01:08:13 2007 -0600
3935 Cleaned up some 85xx PCI bugs
3937 * Cleaned up the CDS PCI Config Tables and added NULL entries to
3939 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
3940 * Fixed 85xx PCI code to assign powar region sizes based on the
3941 config values (rather than hard-coding them)
3942 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
3946 commit 6743105988fc44d5b0d30388c790607835aae7a6
3948 Date: Mon Apr 23 02:54:25 2007 -0500
3950 Add support for the 8568 MDS board
3952 This included some changes to common files:
3953 * Add 8568 processor SVR to various places
3954 * Add support for setting the qe bus-frequency value in the dts
3955 * Add the 8568MDS target to the Makefile
3959 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
3961 Date: Fri Apr 20 14:34:48 2007 -0500
3963 Add support for treating unknown PHYs as generic PHYs.
3965 When bringing up u-boot on new boards, PHY support sometimes gets
3966 neglected. Most PHYs don't really need any special support,
3967 though. By adding a generic entry that always matches if nothing
3968 else does, we can provide support for "unsupported" PHYs for the
3971 The generic PHY driver supports most PHYs, including gigabit.
3976 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
3978 Date: Wed Feb 7 15:28:04 2007 -0600
3980 Conditionalize 8641 Rev1.0 MCM workarounds
3985 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
3987 Date: Mon Apr 30 13:59:50 2007 -0500
3989 Fix memory initialization on MPC8349E-mITX
3991 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
3992 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
3993 on some ITX boards, notably those with a revision 3.1 CPU.
3995 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
3996 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
4002 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
4004 Date: Mon Apr 30 15:26:21 2007 -0500
4006 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
4008 and fix CPU: to align with Board: display text.
4012 commit c1ab82669d9525998c34e802a12cad662723f22a
4014 Date: Fri Mar 16 13:02:53 2007 -0500
4016 Rewrote picos_to_clk() to avoid rounding errors.
4017 Clarified that conversion is to DRAM clocks rather than platform clocks.
4018 Made function static to spd_sdram.c.
4023 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
4025 Date: Sun Apr 29 14:13:01 2007 +0200
4027 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
4031 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
4033 Date: Sun Apr 29 14:01:54 2007 +0200
4035 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
4037 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
4038 message. Use PVR to distinguish between the two variants, and print proper CPU
4045 commit 5c5d3242935cf3543af01142627494434834cf98
4047 Date: Wed Apr 25 12:34:38 2007 -0500
4049 mpc83xx: minor fixups for 8313rdb introduction
4051 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
4053 Date: Wed Apr 25 16:01:26 2007 +0200
4055 [PATCH] simplify silent console
4060 commit 144876a380f5756f57412caf74c1d6dc201dd796
4062 Date: Tue Apr 24 23:01:02 2007 +0200
4064 [PATCH] MTD partition support, JFFS2 support
4066 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
4068 Date: Tue Apr 24 14:03:45 2007 +0200
4070 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
4074 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
4076 Date: Mon Apr 23 02:37:47 2007 -0500
4078 Reworked 85xx speed detection code
4080 Changed the code to read the registers and calculate the clock
4081 rates, rather than using a "switch" statement.
4087 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
4089 Date: Mon Apr 23 02:24:28 2007 -0500
4093 * Add support to the Makefile
4094 * Add 8544 configuration support to the tsec driver
4095 * Add 8544 SVR numbers to processor.h
4100 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
4102 Date: Fri Feb 23 17:12:25 2007 -0600
4104 Support 1G size on 8548
4106 e500v2 and newer cores support 1G page sizes.
4111 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
4113 Date: Fri Feb 23 17:11:16 2007 -0600
4115 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
4117 The other pagesz constants use one letter to specify order of
4118 magnitude. Also change the one reference to it in mpc8548cds/init.S
4122 commit 1f9a318cea14272edd10d63739e2d326c90f430e
4124 Date: Fri Feb 23 16:28:46 2007 -0600
4126 Only set ddrioovcr for 8548 rev1.
4131 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
4133 Date: Sat Feb 24 01:16:45 2007 -0600
4135 Tweak DDR ECC error counter
4137 Enable single-bit error counter when memory was cleared by ddr controller.
4142 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
4144 Date: Mon Feb 12 13:34:55 2007 -0600
4146 85xx: write MAC address to mac-address and local-mac-address
4148 Some device trees have a mac-address property, some have local-mac-address,
4149 and some have both. To support all of these device trees, ftp_cpu_setup()
4150 should write the MAC address to mac-address and local-mac-address, if they
4155 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
4157 Date: Mon Apr 23 01:44:44 2007 -0500
4159 Some 85xx cpu cleanups
4161 * Cleaned up the TSR[WIS] clearing
4162 * Cleaned up DMA initialization
4168 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
4170 Date: Mon Apr 23 01:32:22 2007 -0500
4172 Add cpu support for the 8544
4174 Recognize new SVR values, and add a few register definitions
4180 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
4182 Date: Wed Apr 11 16:51:02 2007 -0500
4184 Add MPC8544DS basic port board files.
4186 Add board port under new board/freescale directory
4187 structure and reuse existing PIXIS FPGA support there.
4192 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
4194 Date: Wed Apr 11 16:50:57 2007 -0500
4196 Add MPC8544DS main configuration file.
4201 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
4203 Date: Wed Dec 27 22:07:15 2006 +0300
4205 Fix PCI I/O space mapping on Freescale MPC85x0ADS
4207 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
4208 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
4209 describing the local address window used for the PCI I/O space accesses -- fix
4210 this and carry over the necessary changes into the MPC8560ADS code since the
4211 PCI I/O space mapping was also broken for this board (by the earlier commit
4212 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
4213 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
4217 board/mpc8540ads/init.S | 4 ++--
4218 board/mpc8560ads/init.S | 4 ++--
4219 include/configs/MPC8540ADS.h | 5 ++---
4220 include/configs/MPC8541CDS.h | 2 +-
4221 include/configs/MPC8548CDS.h | 2 +-
4222 include/configs/MPC8560ADS.h | 8 ++++----
4223 6 files changed, 12 insertions(+), 13 deletions(-)
4225 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
4227 Date: Tue Dec 5 16:42:30 2006 +0800
4229 u-boot: Fix e500 v2 core reset bug
4231 The following patch fixes the e500 v2 core reset bug.
4232 For e500 v2 core, a new reset control register is added to reset the
4237 commit 63247a5acd58032e6cf33f525bc3923b467bac88
4239 Date: Wed Dec 20 11:01:00 2006 +0800
4241 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
4243 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
4244 entry number to control the loop. This can reduce the potential risk
4245 for the 85xx processor increasing its TLB adn LAW entry number.
4250 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
4252 Date: Mon Dec 18 17:01:04 2006 +0800
4254 u-boot: Fix the 85xxcds tsec bug
4256 Fix the 85xxcds tsec bug.
4257 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
4261 commit 7337b237ffc4aaf1b9467024fe472a880d852598
4263 Date: Fri Dec 15 14:43:31 2006 +0800
4265 u-boot: Fix CPU2 errata on MPC8548CDS board
4267 This patch apply workaround of CPU2 errata on MPC8548CDS board.
4271 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
4273 Date: Mon Dec 18 16:25:15 2006 +0800
4275 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
4277 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
4281 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
4283 Date: Thu Dec 14 14:14:55 2006 +0800
4285 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
4287 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
4291 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
4293 Date: Mon Apr 16 14:54:15 2007 -0500
4295 mpc83xx: Add MPC8313ERDB support.
4299 commit 49ea3b6eafe606285ae4d5c378026153dde53200
4301 Date: Mon Apr 16 14:34:21 2007 -0500
4303 mpc83xx: Add generic PCI setup code.
4305 Board code can now request the generic setup code rather than having to
4306 copy-and-paste it for themselves. Boards should be converted to use this
4307 once they're tested with it.
4311 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
4313 Date: Mon Apr 16 14:34:19 2007 -0500
4315 mpc83xx: Add 831x support to speed.c.
4319 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
4321 Date: Mon Apr 16 14:34:18 2007 -0500
4323 mpc83xx: Add 831x support to global_data.h
4327 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
4329 Date: Mon Apr 16 14:34:16 2007 -0500
4331 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
4333 Rather than misleadingly define PVR_83xx as the specific type of 83xx
4334 being built for, the PVR of each core revision is defined. checkcpu() now
4335 prints the core that it detects, rather than aborting if it doesn't find
4336 what it thinks it wants.
4340 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
4342 Date: Mon Apr 16 14:34:15 2007 -0500
4344 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
4348 commit d87c57b201b4572d16f1b642998faa00c9912b16
4350 Date: Mon Apr 16 14:31:55 2007 -0500
4352 mpc83xx: Add register definitions for MPC831x.
4356 commit 7fc4c71a143be8666d70803fb25ae60379c95622
4358 Date: Mon Apr 23 15:39:59 2007 +0200
4364 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
4366 Date: Mon Apr 23 15:30:39 2007 +0200
4368 [PATCH] Avoid assigning PCI resources from zero address
4370 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
4371 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
4372 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
4373 sentence about "0" being considered an invalid address) -- so, use a reasonable
4374 starting value of 0x1000 (that's what the most Linux archs are using).
4376 Alternatively, one might have fixed the calls to pci_set_region() individually
4377 (some code even seems to have taken care of this issue) but that would have
4378 been a lot more work. :-)
4383 commit afb903a2eb9436baa9270ccc0c27082d86497d89
4385 Date: Mon Apr 23 14:00:11 2007 +0200
4387 [patch] setenv(...) can delete environmentalvariables
4389 update setenv() function so that entering a NULL value for the
4390 variable's value will delete the environmental variable
4395 commit 36f104e5caa747d568eff26b369565af57c2ffa6
4397 Date: Mon Apr 23 13:54:24 2007 +0200
4399 [patch] use unsigned char in smc91111 driver for mac
4401 the v_mac variable in the smc91111 driver is declared as a signed char ...
4402 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
4403 because when it gets printed out, you get a display like:
4404 0xFFFFFFE0 and that's no good
4408 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
4410 Date: Mon Apr 23 13:10:52 2007 +0200
4412 USB: (Another) delay for crappy USB keys.
4414 Some USB keys are slow in giving back an answer when the Root HUB
4415 enables power lines.
4419 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
4421 Date: Mon Apr 23 12:00:22 2007 +0200
4423 Remove BOARDLIBS usage completely
4427 commit 32556443840f127170e4baa8bdd5b567039f6c36
4429 Date: Sat Apr 21 21:07:22 2007 +0200
4431 [PATCH] SystemACE support for Microblaze
4433 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
4435 Date: Sat Apr 21 21:02:40 2007 +0200
4437 16bit read/write little endian
4439 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
4441 Date: Sat Apr 21 20:53:31 2007 +0200
4443 Change ML401 parameters - Xilinx BSP
4445 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
4447 Date: Wed Feb 28 05:37:29 2007 -0600
4449 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
4453 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
4455 Date: Fri Jan 19 10:42:37 2007 +0800
4457 Enable LAWs for MPC8641 PCI-Ex2.
4462 commit bd7851ce1e1f140665b520026abf1042968b1102
4464 Date: Fri Apr 20 14:12:26 2007 -0500
4466 mpc86xx; Write MAC address to mac-address and local-mac-address
4468 Some device trees have a mac-address property, some have local-mac-address,
4469 and some have both. To support all of these device trees, ftp_cpu_setup()
4470 should write the MAC address to mac-address and local-mac-address, if they
4476 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
4478 Date: Fri Apr 20 14:11:38 2007 -0500
4480 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
4485 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
4487 Date: Fri Apr 20 17:43:28 2007 +0200
4489 Cleanup compiler warnings, update CHANGELOG
4493 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
4495 Date: Fri Apr 20 12:01:47 2007 +0200
4497 Fix breakage of NC650 board with respect to nand support.
4501 commit 39f23cd90947639ac278a18ff277ec786b5ac167
4503 Date: Fri Apr 20 11:13:16 2007 +0200
4505 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
4507 G2 core reference manual says decrementer and time base
4508 are decreasing/increasing once every 4 bus clock cycles.
4509 Lets fix it, so time in Linux won't run twice as fast
4514 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
4516 Date: Thu Apr 19 23:14:39 2007 -0400
4518 Fix serious pointer bug with bootm and reserve map.
4520 What was suppose to be a stack variable was declared as a pointer,
4521 overwriting random memory.
4522 Also moved the libfdt.a requirement into the main Makefile. That is
4525 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
4527 Date: Thu Apr 19 09:53:52 2007 +0200
4529 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
4531 Previous versions used full wait states for the chip select #1 which
4532 is connected to the Xilinix SystemACE controller on the AMCC Katmai
4533 evaluation board. This leads to really slow access and therefore low
4534 performance. This patch now sets up the chip select a lot faster
4535 resulting in much better read/write performance of the Linux driver.
4539 commit 37837828d89084879bee2f2b8c7c68d4695940df
4541 Date: Wed Apr 18 17:49:29 2007 +0200
4543 Clenaup, update CHANGELOG
4547 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
4549 Date: Wed Apr 18 17:20:58 2007 +0200
4555 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
4557 Date: Wed Apr 18 17:07:26 2007 +0200
4559 Cleanup, update CHANGELOG
4563 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
4565 Date: Wed Apr 18 16:17:46 2007 +0200
4569 commit ad4eb555671d97f96dc56eab55103b1f86874b01
4571 Date: Wed Apr 18 14:30:39 2007 +0200
4573 MCC200 board: remove warning which is obsolete after PSoC firmware changes
4577 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
4579 Date: Wed Apr 18 12:11:05 2007 +0200
4581 [PATCH] icecube/lite5200b: document wakeup from low-power support
4585 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
4587 Date: Wed Apr 18 12:07:47 2007 +0200
4589 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
4593 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
4595 Date: Wed Apr 18 12:05:59 2007 +0200
4597 ppc4xx: Add output for bootrom location to 405EZ ports
4599 Now 405EZ ports also show upon bootup from which boot device
4600 they are configured to boot:
4602 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
4604 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
4605 Bootstrap Option E - Boot ROM Location EBC (32 bits)
4606 16 kB I-Cache 16 kB D-Cache
4607 Board: Acadia - AMCC PPC405EZ Evaluation Board
4611 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
4613 Date: Tue Apr 17 13:30:33 2007 +0100
4615 Move ppearse to ARM board list
4616 Add Konstantin Kletschke for scb9328.
4619 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
4621 Date: Mon Apr 16 14:00:13 2007 +0200
4623 [PATCH] icecube/lite5200b: wakeup from low-power support
4625 U-Boot part of Lite5200b low power mode support.
4626 Puts SDRAM out of self-refresh and transfers control to
4627 address saved at physical 0x0.
4632 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
4634 Date: Sun Apr 15 13:54:26 2007 -0400
4636 Fix the ft_cpu_setup() property settings.
4638 Use "setter" functions instead of flags, cleaner and more flexible.
4639 It also fixes the problem noted by Timur Tabi that the ethernet MAC
4640 addresses were all being set incorrectly to the same MAC address.
4642 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
4644 Date: Sat Apr 14 22:51:24 2007 -0400
4646 Improve the bootm command for CONFIG_OF_LIBFDT
4648 In bootm, create the "/chosen" node only if it doesn't already exist
4649 (better matches the previous behavior).
4650 Update for proper reserved memory map handling for initrd.
4652 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
4654 Date: Sat Apr 14 22:46:41 2007 -0400
4656 Add some utilities to manipulate the reserved memory map.
4658 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
4660 Date: Sat Apr 14 21:16:54 2007 +0200
4664 commit 8e6875183cdca91c134408d119d4abcd48ef6856
4666 Date: Sun Dec 17 18:56:46 2006 +0100
4668 AVR32: Enable MMC support
4670 Set up the portmux for the MMC interface and enable the MMC driver
4671 along with support for DOS partitions, ext2 and FAT filesystems.
4675 commit fc26c97bb6df41b4a95662c34054fe912387bf38
4677 Date: Fri Jan 20 10:03:53 2006 +0100
4681 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
4683 The AT91 ARM-based CPUs use basically the same hardware, so it should
4684 be possible to share this driver, but no effort has been made so far.
4686 Hardware documentation can be found in the AT32AP7000 data sheet,
4687 which can be downloaded from
4689 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
4693 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
4695 Date: Sun Dec 17 18:55:37 2006 +0100
4697 AVR32: Add clk and gpio infrastructure for mmci
4699 Implement functions for configuring the mmci pins, as well as
4700 functions for getting the clock rate of the mmci controller.
4704 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
4706 Date: Sun Dec 17 18:53:56 2006 +0100
4708 Enable partition support with MMC
4710 Include implementations of init_part() and get_partition_info() when
4715 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
4717 Date: Sun Dec 17 17:14:30 2006 +0100
4719 AVR32: Enable networking
4721 Implement MACB initialization for AVR32 and ATSTK1000, and turn
4722 everything on, including the MACB driver.
4726 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
4728 Date: Fri Jan 20 10:03:34 2006 +0100
4730 Atmel MACB ethernet driver
4732 Driver for the Atmel MACB on-chip ethernet controller.
4734 This driver has been tested on the ATSTK1000 board with a AT32AP7000
4735 CPU. It should probably work on AT91SAM926x as well with some minor
4738 Hardware documentation can be found in the AT32AP7000 data sheet,
4739 which can be downloaded from
4741 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
4745 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
4747 Date: Sun Dec 17 16:56:14 2006 +0100
4749 AVR32: Add clk and gpio infrastructure for macb0 and macb1
4751 Implement functions for configuring the macb0 and macb1 pins, as
4752 well as functions for getting the clock rate of the various
4753 busses the macb ethernet controllers are connected to.
4757 commit d5acb95b16a0a74c643524342c3437e765426d05
4759 Date: Sun Dec 17 15:39:15 2006 +0100
4761 AVR32: Implement simple DMA memory allocator
4763 Implement dma_alloc_coherent() which returns cache-aligned
4768 commit 91975b0fea773c9e681fea8cf3349669f27685ee
4770 Date: Sun Dec 17 15:46:02 2006 +0100
4772 Import <linux/mii.h> from the Linux kernel
4774 Instead of creating yet another set of MII register definitions
4775 in the macb driver, here's a complete set of definitions for everyone
4780 commit 1b804b229556a4d862da93c0ec94e79419364b2c
4782 Date: Wed Mar 21 19:47:36 2007 +0100
4784 AVR32: Include more commands for ATSTK1000
4786 Include the imi, imls and jffs commands sets by default on ATSTK1000.
4787 Also define CONFIG_BOOTARGS to something more useful, define
4788 CONFIG_BOOTCOMMAND and enable autoboot by default.
4792 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
4794 Date: Wed Mar 21 19:44:48 2007 +0100
4796 AVR32: Provide a definition of struct stat
4798 Copy the definition of struct stat from the Linux kernel.
4802 commit 12f099c08167a7a51aeee623bc16dafd0841271c
4804 Date: Sun Dec 17 14:46:06 2006 +0100
4806 AVR32: Use initdram() instead of board_init_memories()
4808 Conform to the "standard" interface and use initdram() instead of
4809 board_init_memories() on AVR32. This enables us to get rid of the
4810 sdram_size member of the global_data struct as well.
4814 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
4816 Date: Mon Nov 20 15:53:10 2006 +0100
4818 AVR32: Relocate u-boot to SDRAM
4820 Relocate the u-boot image into SDRAM like everyone else does. This
4821 means that we can handle much larger .data and .bss than we used to.
4825 commit df548d3c3e2bbc40258713167859ffc2ce99a900
4827 Date: Sun Nov 19 18:06:53 2006 +0100
4829 AVR32: Resource management rewrite
4831 Rewrite the resource management code (i.e. I/O memory, clock gating,
4832 gpio) so it doesn't depend on any global state. This is necessary
4833 because this code is heavily used before relocation to RAM, so we
4834 can't write to any global variables.
4836 As an added bonus, this makes u-boot's memory footprint a bit smaller,
4837 although some functionality has been left out; all clocks are enabled
4838 all the time, and there's no checking for gpio line conflicts.
4842 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
4844 Date: Sat Nov 18 18:01:13 2006 +0100
4846 AVR32: Clean up memory-map.h for at32ap7000
4848 Convert spaces to tabs (must have missed this one last time around),
4849 sort the entries by address and group them together by bus
4854 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
4856 Date: Sat Nov 18 17:32:31 2006 +0100
4858 AVR32: Build position-independent u-boot
4860 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
4861 position independent. This will make relocation a lot easier.
4863 -mno-init-got means that gcc shouldn't emit code to load the GOT
4864 address into r6 in every function prologue. We do it once and for
4865 all in the early startup assembly code, so enabling this option
4866 makes u-boot a bit faster and smaller.
4868 The assembly parts have always been position-independent, so no code
4869 changes should be necessary.
4873 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
4875 Date: Sat Nov 18 17:24:31 2006 +0100
4877 AVR32: Use avr32-linux- cross-compilation prefix by default
4879 It doesn't really matter which toolchain you use to compile u-boot,
4880 but the avr32-linux one is probably what most people have installed.
4884 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
4886 Date: Sat Nov 18 17:15:30 2006 +0100
4888 AVR32: Split start_u_boot into board_init_f and board_init_r
4890 Split the avr32 initialization code into a function to run before
4891 relocation, board_init_f and a function to run after relocation,
4892 board_init_r. For now, board_init_f simply calls board_init_r
4897 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
4899 Date: Sat Apr 14 05:26:48 2007 +0200
4901 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
4902 clear the Display after reset.
4906 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
4908 Date: Fri Apr 13 09:13:33 2007 +0200
4910 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
4912 Fix bug introduced by "Fix get_partition_info() parameter error in all
4913 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
4914 to use diskboot or scsiboot form another device than 0.
4918 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
4920 Date: Fri Apr 13 08:02:24 2007 +0200
4922 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
4927 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
4929 Date: Fri Mar 9 19:08:25 2007 +0800
4931 Fix two bugs for MPC83xx DDR2 controller SPD Init
4933 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
4934 the first bug is that the picos_to_clk routine introduces a huge
4935 rounding error in 83xx.
4936 the second bug is that the mode register write recovery field is
4937 tWR-1, not tWR >> 1.
4939 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
4941 Date: Thu Apr 12 14:15:59 2007 +0200
4943 ppc4xx: Fix i2c divisor calcularion for PPC4xx
4945 This patch fixes changes the i2c_init(...) function to use the function
4946 get_OPB_freq() rather than calculating the OPB speed by
4947 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
4948 specific per processor. The prior method was not and so was calculating
4949 the wrong speed for some PPC4xx processors.
4954 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
4956 Date: Wed Apr 11 17:25:01 2007 +0200
4962 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
4964 Date: Wed Apr 11 17:22:55 2007 +0200
4966 Update for SC3 board
4968 * Make IDE timeout configurable through ide_reset_timeout variable.
4969 * Use Newline as "password" string
4970 * Use just a single partition in NAND flash
4972 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
4974 Date: Mon Jan 22 12:37:30 2007 -0600
4976 Add PIXIS FPGA support for MPC8641HPCN board.
4978 Move the 8641HPCN's PIXIS code to the new directory
4979 board/freescale/common/ as it will be shared by
4980 future boards not in the same processor family.
4982 Write a "pixis_reset" command that utilizes the FPGA
4983 reset sequencer to support alternate soft-reset options
4984 such as using the "alternate" flash bank, enabling
4985 the watch dog, or choosing different CPU frequencies.
4987 Add documentation for the pixis_reset to README.mpc8641hpcn.
4992 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
4994 Date: Fri Apr 6 14:19:43 2007 -0400
4996 Moved fdt command support code to fdt_support.c
4998 ...in preparation for improving the bootm command's handling of fdt blobs.
4999 Also cleaned up some coding sloppiness.
5001 commit 6679f9299534e488a171a9bb8f9bb891de247aab
5003 Date: Fri Apr 6 14:17:14 2007 -0400
5005 libfdt: Make fdt_check_header() public
5007 Changed _fdt_check_header() to fdt_check_header() and made it part of
5008 the interface - it is a useful routine.
5010 Also did some asthetics cleanup to the include files (headers).
5012 commit c0707ce65677650b5ceab0500ee50ae5168afef2
5014 Date: Thu Apr 5 18:34:06 2007 +0800
5016 [Blackfin][PATCH] Kill off a bunch of common local prototypes
5018 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
5020 Date: Thu Apr 5 18:33:04 2007 +0800
5022 [Blackfin][PATCH] Fix dynamic CPLB generation issue
5024 commit 0445e3a264251d75b1be45ef713c70726a2952f0
5026 Date: Thu Apr 5 18:31:47 2007 +0800
5028 [Blackfin][PATCH] minior cleanup
5030 commit 155fd766573981090e638b493d5857562151862e
5032 Date: Thu Apr 5 18:31:18 2007 +0800
5034 [Blackfin][PATCH] Fix copyright and update license
5036 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
5038 Date: Thu Apr 5 18:30:25 2007 +0800
5040 [Blackfin][PATCH] Add BF537 EMAC driver initialization
5042 commit 889256e8604e0c68db1d866d720894dffede9df6
5044 Date: Thu Apr 5 18:29:55 2007 +0800
5046 [Blackfin][PATCH] call real the system synchronize instruction
5048 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
5050 Date: Thu Apr 5 18:29:17 2007 +0800
5052 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
5054 commit dfeeab2cd680df047e68e723b246adf6f33bb556
5056 Date: Thu Apr 5 18:28:34 2007 +0800
5058 [Blackfin][PATCH]: fix flash unaligned copy issue
5060 commit 443feb740584e406efa203af909fe2926608e8d5
5062 Date: Wed Mar 21 09:55:01 2007 +0300
5064 Update usage of 'nc' in README.NetConsole
5066 Added information about usage of NetConsole on systems where the -l and -p
5067 switches are mutually exclusive.
5072 commit 31c98a88228021b314c89ebb8104fb6473da4471
5074 Date: Wed Apr 4 02:09:30 2007 +0200
5076 Minor coding style cleanup.
5078 commit 94abd7c0583ebe01e799b25f451201deeaab550d
5080 Date: Wed Apr 4 01:49:15 2007 +0200
5084 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
5086 Date: Tue Apr 3 14:27:18 2007 +0200
5088 Support for the Philips ISP116x HCD (Host Controller Driver)
5092 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
5094 Date: Tue Apr 3 14:27:08 2007 +0200
5096 USB: cleanup monahans usb support. Remove dead code.
5100 commit a65c5768e5537530bd1780af3d3fddc3113a163c
5102 Date: Mon Apr 2 10:09:30 2007 +0200
5104 ppc4xx: Change SysACE address on Katmai
5106 With this new base address of the Xilinx SystemACE controller
5107 the Linux driver will be easier to adapt, since it can now be
5108 mapped via the "normal" ioremap() call.
5112 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
5114 Date: Sat Mar 31 14:30:53 2007 -0400
5116 Fix some minor whitespace violations.
5118 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
5120 Date: Sat Mar 31 12:23:51 2007 -0400
5122 Add a flattened device tree (fdt) command (2 of 2)
5124 Modifications to the existing code to support the new fdt command.
5126 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
5128 Date: Sat Mar 31 12:22:10 2007 -0400
5130 Add a flattened device tree (fdt) command (1 of 2)
5132 The fdt command uses David Gibson's libfdt library to manipulate as well
5133 as print the flattened device tree. This patch is the new command,
5134 the second part is the modifications to the existing code.
5136 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
5138 Date: Sat Mar 31 12:13:43 2007 -0400
5140 libfdt: Enhanced and published fdt_next_tag()
5142 Enhanced the formerly private function _fdt_next_tag() to allow stepping
5143 through the tree, used to produce a human-readable dump, and made
5144 it part of the published interface.
5145 Also added some comments.
5147 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
5149 Date: Sat Mar 31 12:05:39 2007 -0400
5151 libfdt: Customizations for use by u-boot.
5153 Changes to David Gibson's original source to fit into u-boot's
5154 environment. No functionality changes.
5156 commit 35748177c64a4a83a00057e93bb33e40278a2a96
5158 Date: Sat Mar 31 12:00:56 2007 -0400
5160 libfdt: Import libfdt source (2 of 2)
5162 This adds the applicable libfdt source files (unmodified) and a README
5163 to explain where the source came from.
5165 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
5167 Date: Sat Mar 31 11:59:59 2007 -0400
5169 libfdt: Import libfdt source (1 of 2)
5171 This adds the applicable libfdt source files (unmodified) and a README
5172 to explain where the source came from.
5174 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
5176 Date: Sat Mar 31 13:16:23 2007 +0200
5178 ppc4xx: Update Katmai bootstrap command
5180 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
5185 commit cabee756a6532986729477c3cc1ea16ef8517ad2
5187 Date: Sat Mar 31 13:15:06 2007 +0200
5189 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
5191 Additional RAM information is now printed upon powerup, like
5192 DDR2 frequency and CAS latency.
5196 commit 60723803431ac75cad085690789e433d5ab9174e
5198 Date: Sat Mar 31 08:48:36 2007 +0200
5200 ppc4xx: Change Yucca config file to support ECC
5202 With the updated 44x DDR2 driver the Yucca board now supports
5203 ECC generation and checking.
5207 commit 490e5730c674b20d708b783a2c5ffd7208f83873
5209 Date: Sat Mar 31 08:47:34 2007 +0200
5211 ppc4xx: Fix "bootstrap" command for Katmai board
5213 The board specific "bootstrap" command is now fixed and can
5214 be used for the AMCC Katmai board to configure different
5215 CPU/PLB/OPB frequencies.
5219 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
5221 Date: Sat Mar 31 08:46:08 2007 +0200
5223 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
5225 Fix a bug in the auto calibration routine. This driver now runs
5226 more reliable with the tested modules. It's also tested with
5227 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
5231 commit 342cd097be1e7affe82f42ab3da220959a699e64
5233 Date: Fri Mar 30 22:52:09 2007 +0200
5235 [PATCH] Clean include dependence
5237 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
5239 Date: Fri Mar 30 22:42:45 2007 +0200
5241 [CLEAN] Remove inefficient Suzaku code
5243 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
5245 Date: Wed Mar 28 15:03:16 2007 +0200
5247 Merge some AMCC make targets to keep the top-level Makefile smaller
5251 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
5253 Date: Wed Mar 28 14:52:12 2007 +0200
5255 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
5257 The "old" i2c commands (iprobe, imd...) are now compiled in again,
5258 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
5263 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
5265 Date: Tue Mar 27 00:32:16 2007 +0200
5267 PATCH: Resolve GPL license problem
5269 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
5271 Date: Mon Mar 26 12:03:36 2007 +0200
5273 PXA: pxa27x USB OHCI support
5277 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
5279 Date: Mon Mar 26 11:21:05 2007 +0200
5281 USB: remove the S3C24X0_merge #define, which was introduced while
5282 merging OHCI drivers.
5286 commit 1798049522f594013aea29457d46794298c6ae15
5288 Date: Mon Mar 26 01:39:07 2007 +0200
5290 Support for XUPV2P board
5292 BSP autoconfig support
5294 commit 0d974d5297349504a2ddfa09314be573b5df320a
5296 Date: Sat Mar 24 15:57:09 2007 +0100
5298 [PATCH] Add 4xx GPIO functions
5300 This patch adds some 4xx GPIO functions. It also moves some of the
5301 common code and defines into a common 4xx GPIO header file.
5305 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
5307 Date: Sat Mar 24 15:55:58 2007 +0100
5309 [PATCH] Small Sequoia cleanup
5313 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
5315 Date: Sat Mar 24 15:45:34 2007 +0100
5317 [PATCH] Clean up 40EZ/Acadia support
5319 This patch cleans up all the open issue of the preliminary
5324 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
5326 Date: Tue Dec 12 11:02:20 2006 -0600
5328 Fix 8641HPCN problem with ld version 2.16
5330 (Dot outside sections problem).
5332 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
5336 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
5338 Date: Thu Dec 7 10:35:55 2006 -0600
5340 Set Rev 2.x 86xx PIC in mixed mode.
5342 Prevent false interrupt from hanging Linux as MSR[EE] is set
5343 to enable interrupts by changing the PIC out of the default
5344 pass through mode into mixed mode.
5349 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
5351 Date: Thu Dec 7 10:32:35 2006 -0600
5353 Add flash cmd function to 8641HPCN ramboot
5355 Also fixes some commmand for 8641 HPCN ramboot case.
5360 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
5362 Date: Thu Dec 7 10:34:14 2006 -0600
5364 Add support for 8641 Rev 2 silicon.
5366 Without this patch, I am unable to get to the prompt on rev 2 silicon.
5367 Only set ddrioovcr for rev1.
5372 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
5374 Date: Thu Mar 22 00:13:12 2007 +0100
5376 Code cleanup / re-insert previous Copyright entries.
5380 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
5382 Date: Wed Mar 21 23:26:15 2007 +0100
5384 Code cleanup. Update CHANGELOG
5386 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
5388 Date: Wed Mar 21 14:54:29 2007 +0100
5390 ppc4xx: Fix file mode of include/configs/acadia.h
5394 commit d5f4614c9350d9333e575100fb250aab774d0258
5396 Date: Wed Mar 21 14:41:46 2007 +0100
5398 SPC1920: fix small clock routing bug
5402 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
5404 Date: Wed Mar 21 13:39:57 2007 +0100
5406 [PATCH] Add AMCC Acadia (405EZ) eval board support
5408 This patch adds support for the new AMCC Acadia eval board.
5410 Please note that this Acadia/405EZ support is still in a beta stage.
5411 Still lot's of cleanup needed but we need a preliminary release now.
5415 commit e01bd218b00af73499331a1a701625a852cd286f
5417 Date: Wed Mar 21 13:38:59 2007 +0100
5419 [PATCH] Add AMCC PPC405EZ support
5421 This patch adds support for the new AMCC 405EZ PPC. It is in
5422 preparation for the AMCC Acadia board support.
5424 Please note that this Acadia/405EZ support is still in a beta stage.
5425 Still lot's of cleanup needed but we need a preliminary release now.
5429 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
5431 Date: Wed Mar 21 08:45:17 2007 +0100
5433 [PATCH] TQM8272: dont change the bits given from the HRCW
5434 for the SIUMCR and BCR Register.
5435 Fix the calculation for the EEprom Size
5439 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
5441 Date: Tue Mar 20 18:16:24 2007 +0800
5443 [Blackfin][PATCH] Add BF561 EZKIT board support
5445 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
5447 Date: Mon Mar 19 22:55:58 2007 +0800
5449 [Blackfin][PATCH] minor cleanup
5451 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
5453 Date: Mon Mar 19 13:10:08 2007 +0100
5455 Remove obsoleted POST files.
5459 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
5461 Date: Mon Mar 19 01:26:11 2007 +0800
5463 [PATCH] Add flash chip M29W320ET/B support
5465 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
5467 Date: Mon Mar 19 01:24:52 2007 +0800
5469 [Blackfin][PATCH] Add BF537 stamp board support
5471 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
5473 Date: Fri Mar 16 21:11:42 2007 +0100
5475 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
5477 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
5478 DDR memory are dynamically programmed matching the total size
5479 of the equipped memory (DIMM modules).
5483 commit 76d1466f918b881cda2d259254761e73885093c2
5485 Date: Tue Mar 13 13:38:05 2007 +0100
5487 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
5488 boards in terms of unification.
5492 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
5494 Date: Tue Mar 13 16:05:55 2007 +0100
5496 Make SC3 board build with 'make O='; use 'addcons' consistently
5497 (SC3 and Jupiter used to use 'addcon' instead).
5501 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
5503 Date: Tue Mar 13 09:40:59 2007 +0100
5505 [PATCH] update board config for jupiter Board:
5507 CONFIG_CMDLINE_EDITING,
5508 CFG_ENV_ADDR_REDUND activated
5512 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
5514 Date: Mon Mar 12 12:11:55 2007 +0800
5516 [Blackfin][PATCH] minor cleanup
5518 commit bfa5754a58477ac917d21527cd0f079d87cf188e
5520 Date: Mon Mar 12 01:42:06 2007 +0800
5522 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
5524 commit 8440bb14581a294375c34b91b42512f9753d1130
5526 Date: Mon Mar 12 00:25:14 2007 +0800
5528 [Blackfin][PATCH] code cleanup
5530 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
5532 Date: Sun Mar 11 13:48:24 2007 +0100
5534 [Microblaze][PATCH] part 2
5536 interrupt controller support
5540 board information support
5542 booting image support
5544 adding support for Xilinx ML401
5546 commit 76316a318de91f6184e7c22a10e02d275ade2441
5548 Date: Sun Mar 11 13:42:58 2007 +0100
5552 interrupt controller support
5556 board information support
5558 booting image support
5560 adding support for Xilinx ML401
5562 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
5564 Date: Sat Mar 10 23:49:29 2007 +0800
5566 [Blackfin][PATCH] code cleanup
5568 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
5570 Date: Fri Mar 9 13:40:56 2007 +0800
5572 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
5574 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
5576 Date: Fri Mar 9 13:38:44 2007 +0800
5578 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
5580 commit 992423ab43c2bcf6b704853bd00af77450915e20
5582 Date: Thu Mar 8 23:00:08 2007 +0100
5584 ppc4xx: Fix file mode of sequoia.c
5588 commit eb92f613556800f7483666db09d9a237ad911d4a
5590 Date: Thu Mar 8 22:52:51 2007 +0100
5594 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
5596 Date: Thu Mar 8 09:39:48 2007 -0600
5598 ppc4xx: Clear Sequoia/Rainier security engine reset bits
5602 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
5604 Date: Thu Mar 8 16:26:52 2007 +0100
5606 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
5610 commit d9fc703246840c4b268debf48c334ba55c597dc0
5612 Date: Thu Mar 8 16:25:47 2007 +0100
5614 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
5618 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
5620 Date: Thu Mar 8 16:23:11 2007 +0100
5622 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
5626 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
5628 Date: Thu Mar 8 16:20:32 2007 +0100
5630 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
5634 commit f9fc6a5852a6335840882fa2111925010eea1abe
5636 Date: Wed Mar 7 15:32:01 2007 +0100
5638 fixed ethernet phy configuration for plu405 board
5642 commit 769104c9356594deb2092e204a39c05b33202d6c
5644 Date: Thu Mar 8 21:49:27 2007 +0100
5648 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
5650 Date: Thu Mar 8 10:13:16 2007 +0100
5652 [PATCH] Update AMCC Luan 440SP eval board support
5654 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
5655 inititializition. This includes DDR auto calibration and support
5656 for different DIMM modules, instead of the fixed setup used in
5657 the earlier version.
5659 This patch also enables the cache in FLASH for the startup
5660 phase of U-Boot (while running from FLASH). After relocating to
5661 SDRAM the cache is disabled again. This will speed up the boot
5662 process, especially the SDRAM setup, since there are some loops
5663 for memory testing (auto calibration).
5667 commit 2f5df47351910a2936c7741cf111855829200943
5669 Date: Thu Mar 8 10:10:18 2007 +0100
5671 [PATCH] Update AMCC Yucca 440SPe eval board support
5673 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
5674 inititializition. This includes DDR auto calibration and support
5675 for different DIMM modules, instead of the fixed setup used in
5676 the earlier version.
5680 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
5682 Date: Thu Mar 8 10:07:18 2007 +0100
5684 ppc4xx: Small AMCC Katmai 440SPe update
5688 commit df294497479b1dca6dd86318b2a912f72fede0df
5690 Date: Thu Mar 8 10:06:09 2007 +0100
5692 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
5696 commit 83853178bd36bca6f0f8f1331476620c84a587fc
5698 Date: Wed Mar 7 12:14:50 2007 -0600
5700 net - Support ping reply when processing net-loop
5702 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
5704 This permits the ping command to test the phy interface when the phy
5705 is put in loopback mode (typically by setting register 0 bit 14).
5707 It also allows the port to respond to an external ping when u-boot is
5708 processing some other net command (such as tftp). This is useful when
5709 tftp appears to hang.
5714 commit fa1aef15bcd47736687be1af544506e90fba545d
5716 Date: Wed Mar 7 16:43:00 2007 +0100
5718 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
5720 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
5721 DDR memory are dynamically programmed matching the total size
5722 of the equipped memory (DIMM modules).
5726 commit e2ebe696818939e2b974628be9c921ea3fe9de13
5728 Date: Wed Mar 7 16:39:36 2007 +0100
5730 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
5732 This patch fixes a problem that occurs when 2 DIMM's are
5733 used. This problem was first spotted and fixed by Gerald Jackson
5735 problem in a little more clever way.
5737 This patch also adds the nice functionality to dynamically
5738 create the TLB entries for the SDRAM (tlb.c). So we should
5739 never run into such problems with wrong (too short) TLB
5740 initialization again on these platforms.
5742 As this feature is new to the "old" 44x SPD DDR driver, it
5743 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
5747 commit 39218433983417b9df087976a79e3f80dd5e83d6
5749 Date: Wed Mar 7 16:33:44 2007 +0100
5751 UC101: fix compiler warnings
5753 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
5755 Date: Wed Mar 7 16:19:46 2007 +0100
5757 HMI1001: fix build error, cleanup compiler warnings.
5759 commit ad5bb451ade552c44bef9119d907929ebc2c126f
5761 Date: Tue Mar 6 18:08:43 2007 +0100
5763 Restructure POST directory to support of other CPUs, boards, etc.
5765 commit a5284efd125967675b2e9c6ef7b95832268ad360
5767 Date: Tue Mar 6 18:01:47 2007 +0100
5769 Fix HOSTARCH handling.
5770 Patch by Mike Frysinger, Mar 05 2007
5772 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
5774 Date: Tue Mar 6 07:47:04 2007 +0100
5776 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
5778 As provided by the AMCC applications team, this patch optimizes the
5779 DDR2 setup for 166MHz bus speed. The values provided are also save
5780 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
5781 setup has to be adjusted as done in this patch.
5783 For this the NAND booting version had to include the "speed.c" file
5784 from the cpu/ppc4xx directory. With this addition the NAND SPL image
5785 will just fit into the 4kbytes of program space. gcc version 4.x as
5786 provided with ELDK 4.x is needed to generate this optimized code.
5790 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
5792 Date: Sun Mar 4 01:36:05 2007 +0100
5796 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
5798 Date: Wed Feb 28 00:02:04 2007 -0600
5800 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
5802 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
5804 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
5806 Date: Tue Feb 27 23:51:42 2007 -0600
5808 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
5810 The config value for:
5818 Were not being used when setting the appropriate register
5826 To allow full config of the SCCR.
5828 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
5829 that were just bogus.
5833 commit d51b3cf371cd441030460ef19d36b2924c361b1a
5835 Date: Thu Feb 22 20:06:57 2007 -0600
5837 mpc83xx: update [local-]mac-address properties on UEC based devices
5839 8360 and 832x weren't updating their [local-]mac-address
5840 properties. This patch fixes that.
5844 commit 61f4f912acbe60776c5e00df1ec94094ce672957
5846 Date: Tue Feb 13 10:41:42 2007 -0600
5848 mpc83xx: write MAC address to mac-address and local-mac-address
5850 Some device trees have a mac-address property, some have local-mac-address,
5851 and some have both. To support all of these device trees, this patch
5852 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
5853 This function already updates local-mac-address.
5857 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
5859 Date: Tue Feb 27 18:41:08 2007 -0600
5861 mpc83xx: add command line editing by default
5863 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
5865 Date: Wed Feb 14 19:50:53 2007 -0600
5867 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
5869 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
5870 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
5872 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
5877 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
5879 Date: Wed Feb 14 18:27:17 2007 +0800
5881 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
5883 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
5884 it pass DDR/DDR2 compliance tests.
5888 commit b110f40bd180c6b560276589beedf753e97c46ce
5890 Date: Wed Feb 14 18:27:06 2007 +0800
5892 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
5894 MPC8360E rev2.0 have new spridr,and PVR value,
5895 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
5899 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
5901 Date: Wed Feb 14 18:26:44 2007 +0800
5903 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
5905 MPC8349E rev3.1 have new spridr,and PVR value,
5906 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
5910 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
5912 Date: Wed Jan 31 11:04:19 2007 +0100
5914 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
5916 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
5917 which is used to se if an slave will ACK after receiving its address.
5919 Correct i2c probing to use this method as the old method could upset
5920 a slave as it wrote a data byte to it.
5922 Add a small delay in i2c_init() to let the controller
5923 shutdown any ongoing I2C activity.
5927 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
5929 Date: Wed Jan 31 15:54:29 2007 -0600
5931 mpc83xx: Add support for the MPC8349E-mITX-GP
5933 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
5934 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
5935 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
5939 commit fab16807adad350f618024350c6950165c247c72
5941 Date: Wed Jan 31 15:54:20 2007 -0600
5943 mpc83xx: Delete sdram_init() for MPC8349E-mITX
5945 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
5946 never does anything. This patch deletes it.
5950 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
5952 Date: Fri Jan 19 10:43:26 2007 +0800
5954 mpc83xx: Fix the LAW1/3 bug
5956 The patch solves the alignment problem of the local bus access windows to
5957 render accessible the memory bank and PHY registers of UPC 1 (starting at
5958 0xf801 0000). What we actually did was to adjust the sizes of the bus
5959 access windows so that the base address alignment requirement would be met.
5965 commit 97c4b397dce236a7318b304667bf89e59d08b17c
5967 Date: Tue Jan 30 16:15:31 2007 -0600
5969 mpc83xx: don't hang if watchdog configured on 8360, 832x
5971 don't hang if watchdog configured on 8360, 832x
5973 The watchdog programming model is the same across all 83xx devices;
5974 make the code reflect that.
5976 commit b70047478570e371ce7223be342ce98afea0f7d6
5978 Date: Tue Jan 30 16:15:21 2007 -0600
5980 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
5982 protect memcpy to bad address if a local-mac-address is missing from dt
5984 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
5986 Date: Tue Jan 30 16:15:04 2007 -0600
5988 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
5990 make 8360 default environment fdt be 8360 (not 8349)
5992 commit a28899c910024a0226331df07207b1038c300c93
5994 Date: Tue Jan 30 16:14:50 2007 -0600
5996 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
5998 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
5999 be used for busy-waiting since it strips the 'volatile' property from
6000 the bd variable. gcc3 was working by pure luck.
6002 This is a follow on patch to "Fix the UEC driver bug of QE"
6004 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
6006 Date: Tue Jan 30 14:08:30 2007 -0600
6008 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
6010 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
6011 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
6012 CONFIG_MPC834X so they are more generic.
6016 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
6018 Date: Thu Jan 25 13:40:55 2007 -0600
6020 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
6022 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
6024 Date: Wed Jan 24 17:18:37 2007 -0600
6026 mpc83xx: sort Makefile targets
6028 reordered targets alphabetically
6030 commit 91e25769771c1164ed63ffca0add49f934ae3343
6032 Date: Tue Jan 16 11:38:14 2007 -0500
6034 mpc83xx: U-Boot support for Wind River SBC8349
6036 I've redone the SBC8349 support to match git-current, which
6037 incorporates all the MPC834x updates from Freescale since the 1.1.6
6038 release, including the DDR changes.
6040 I've kept all the SBC8349 files as parallel as possible to the
6041 MPC8349EMDS ones for ease of maintenance and to allow for easy
6042 inspection of what was changed to support this board. Hence the SBC8349
6043 U-Boot has FDT support and everything else that the MPC8349EMDS has.
6045 Fortunately the Freescale updates added support for boards using CS0,
6046 but I had to change spd_sdram.c to allow for board specific settings for
6047 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
6048 default if the board doesn't specify a value.)
6050 Hopefully this should be mergeable as-is and require no whitespace
6051 cleanups or similar, but if something doesn't measure up then let me
6052 know and I'll fix it.
6057 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
6059 Date: Thu Dec 14 19:03:21 2006 +0800
6061 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
6063 A redundant semicolon existed in mpc8349itx.c
6068 commit f35f358241c549be3f75cfe2eaa642914275b7ba
6070 Date: Wed Dec 6 21:23:55 2006 -0500
6072 mpc83xx: Put the version (and magic) after the HRCW.
6074 Put the version (and magic) after the HRCW. This puts it in a fixed
6075 location in flash, not at the start of flash but as close as we can get.
6079 commit 48aecd969171a6e99a55fae04933857787f9a5bd
6081 Date: Thu Dec 7 21:14:51 2006 +0800
6083 mpc83xx: Add the MPC832XEMDS board readme
6085 Add the MPC832XEMDS board readme
6089 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
6091 Date: Thu Dec 7 21:13:15 2006 +0800
6093 mpc83xx: Add support for the MPC832XEMDS board
6095 This patch supports DUART, ETH3/4 and PCI etc.
6099 commit e080313c32322e15ab5a18eb896a252858c57284
6101 Date: Thu Dec 7 21:11:58 2006 +0800
6103 mpc83xx: streamline the 83xx immr head file
6105 For better format and style, I streamlined the 83xx head files,
6106 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
6107 duplicated macro definition appear in the both files; 2) the structure
6108 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
6109 macro definition put inside the each structure. So, I cleaned up the
6110 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
6111 moved the macro definition to mpc83xx.h, Just like MPC8260.
6115 *streamline the 83xx immr head file
6119 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
6121 Date: Wed Dec 6 11:38:17 2006 +0800
6123 mpc83xx: Fix the UEC driver bug of QE
6125 The patch prevents the GCC tool chain from striping useful code for
6126 optimization. It will make UEC ethernet driver workable, Otherwise the
6127 UEC will fail in tx when you are using gcc4.x. but the driver can work
6128 when using gcc3.4.3.
6132 *Prevent the GCC from striping code for optimization, Otherwise the UEC
6133 will tx failed when you are using gcc4.x.
6137 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
6139 Date: Thu Mar 1 21:11:36 2007 +0100
6141 [PATCH] Update AMCC Katmai 440SPe eval board support
6143 This patch updates the recently added Katmai board support. The biggest
6144 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
6147 Please note, that still some problems are left with some memory
6148 configurations. See the driver for more details.
6152 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
6154 Date: Thu Mar 1 07:03:25 2007 +0100
6156 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
6160 commit ccbc7036648e465697ca298ba51e0e76dda352a0
6162 Date: Wed Feb 28 01:28:53 2007 +0100
6164 SC3: fix typo in default environment
6166 commit e344568b1b46af85ec32d815586f91bc115d6223
6168 Date: Tue Feb 27 20:15:30 2007 +0300
6170 MCC200: Fixes for update procedure
6172 - fix logic error in image type handling
6173 - make sure file system images (cramfs etc.) get stored in flash
6174 with image header stripped so they can be mounted through MTD
6176 commit 743571145b37182757d4e688a77860b36ee77573
6178 Date: Tue Feb 27 14:26:04 2007 +0100
6182 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
6184 Date: Tue Feb 27 12:40:16 2007 +0300
6186 MCC200 update - add LCD Progress Indicator
6188 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
6190 Date: Thu Feb 22 07:43:34 2007 +0100
6192 [PATCH] get_dev() now unconditionally uses manual relocation
6194 Since the relocation fix is not included yet and we're not sure how
6195 it will be added, this patch removes code that required relocation
6196 to be fixed for now.
6200 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
6202 Date: Thu Feb 22 07:40:23 2007 +0100
6204 [PATCH] Change systemace driver to select 8 & 16bit mode
6206 As suggested by Grant Likely this patch enables the Xilinx SystemACE
6207 driver to select 8 or 16bit mode upon startup.
6211 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
6213 Date: Wed Feb 21 16:52:31 2007 +0100
6215 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
6217 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
6218 is fully finished. The sync() is defined in each CPU's io.h file. For
6219 those CPUs which do not need sync for now, a dummy sync() is defined in
6224 commit da04995c7dc6772013a9a0dc5c767f190c402478
6226 Date: Wed Feb 21 13:44:34 2007 +0100
6228 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
6232 commit 751bb57107d78978ae08e697c3deba816f5be091
6234 Date: Tue Feb 20 13:21:57 2007 +0100
6236 [PATCH] Fix relocation problem with "new" get_dev() function
6238 This patch enables the "new" get_dev() function for block devices
6239 introduced by Grant Likely to be used on systems that still suffer
6240 from the relocation problems (manual relocation neede because of
6241 problems with linker script).
6243 Hopefully we can resolve this relocation issue soon for all platform
6244 so we don't need this additional code anymore.
6248 commit d93e2212f962668b3dce091ff5edc33f2347fe37
6250 Date: Tue Feb 20 13:17:42 2007 +0100
6252 [PATCH] Update SystemACE driver for 16bit access
6254 This patch removes some problems when the Xilinx SystemACE driver
6255 is used with 16bit access on an big endian platform (like the
6260 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
6262 Date: Tue Feb 20 13:15:40 2007 +0100
6264 [PATCH] Clean up Katmai (440SPe) linker script
6268 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
6270 Date: Tue Feb 20 10:57:08 2007 +0100
6272 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
6276 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
6278 Date: Tue Feb 20 10:51:26 2007 +0100
6280 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
6282 This patch switches to the desired I2C bus when the date/dtt
6283 commands are called. This can be configured using the
6284 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
6288 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
6290 Date: Tue Feb 20 10:43:34 2007 +0100
6292 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
6294 This patch adds support for the DDR2 controller used on the
6295 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
6296 board and works fine with the following DIMM modules:
6298 - Corsair CM2X512-5400C4 (512MByte per DIMM)
6299 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
6300 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
6302 This patch also adds the nice functionality to dynamically
6303 create the TLB entries for the SDRAM (tlb.c). So we should
6304 never run into such problems with wrong (too short) TLB
6305 initialization again on these platforms.
6309 commit 36d830c9830379045f5daa9f542ac1c990c70068
6311 Date: Tue Feb 20 10:35:42 2007 +0100
6313 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
6315 Since the existing 4xx SPD SDRAM initialization routines for the
6316 405 SDRAM controller and the 440 DDR controller don't have much in
6317 common this patch splits both drivers into different files.
6319 This is in preparation for the 440 DDR2 controller support (440SP/e).
6323 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
6325 Date: Tue Feb 20 10:27:08 2007 +0100
6327 [PATCH] PPC4xx: Add support for multiple I2C busses
6329 This patch adds support for multiple I2C busses on the PPC4xx
6330 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
6331 to make use of this feature.
6333 It also merges the 405 and 440 i2c header files into one common
6336 Also the 4xx i2c reset procedure is reworked since I experienced
6337 some problems with the first access on the 440SPe Katmai board.
6341 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
6343 Date: Tue Feb 20 09:05:45 2007 +0100
6345 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
6347 Block device read/write is anonymous data; there is no need to use a
6348 typed pointer. void * is fine. Also add a hook for block_read functions
6352 commit 53758fa20e935cc87eeb0519ed365df753a6f289
6354 Date: Tue Feb 20 09:05:38 2007 +0100
6356 [PATCH 8_9] Add block_write hook to block_dev_desc_t
6358 Preparation for future patches which support block device writing
6362 commit f4852ebe6ca946a509667eb68be42026f837be76
6364 Date: Tue Feb 20 09:05:31 2007 +0100
6366 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
6368 Register read/write does not need to be wrapped in a full function. The
6369 patch replaces them with macros.
6373 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
6375 Date: Tue Feb 20 09:05:23 2007 +0100
6377 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
6379 The code in this file is not a command; it is a device driver. Put it in
6380 the correct place. There are zero functional changes in this patch, it
6381 only moves the file.
6385 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
6387 Date: Tue Feb 20 09:05:16 2007 +0100
6389 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
6391 This patch is in preparation of additional changes to the sysace driver.
6392 May as well take this opportunity to fixup the inconsistent whitespace since
6393 this file is about to undergo major changes anyway.
6395 There are zero functional changes in this patch. It only cleans up the
6400 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
6402 Date: Tue Feb 20 09:05:07 2007 +0100
6404 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
6406 isprint is already defined in ctype.c
6410 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
6412 Date: Tue Feb 20 09:05:00 2007 +0100
6414 [PATCH 3_9] Move buffer print code from md command to common function
6416 Printing a buffer is a darn useful thing. Move the buffer print code
6417 into print_buffer() in lib_generic/
6421 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
6423 Date: Tue Feb 20 09:04:52 2007 +0100
6425 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
6427 Change the xilinx device drivers and board code to include config.h
6428 instead of xparameters.h directly. config.h always includes the
6429 correct xparameters file. This change reduces the posibility of
6430 including the wrong file when adding a new xilinx board port
6434 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
6436 Date: Tue Feb 20 09:04:34 2007 +0100
6438 [PATCH 1_4] Merge common get_dev() routines for block devices
6440 Each of the filesystem drivers duplicate the get_dev routine. This change
6441 merges them into a single function in part.c
6445 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
6447 Date: Mon Feb 19 23:09:51 2007 +0100
6449 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
6450 as root file system images.
6452 commit 489c696ae7211218961d159e43e722d74c36fcbc
6454 Date: Wed Feb 14 14:30:28 2007 +0300
6456 MCC200: Extensions to Software Update Mechanism
6458 Update / extend Software Update Mechanism for MCC200 board:
6460 - Add support for rootfs image added. The environment variables
6461 "rootfs_st" and "rootfs_nd" can be used to override the default
6462 values of the image start and end.
6463 - Remove excessive key check code.
6466 commit 4be23a12f23f1372634edc3215137b09768b7949
6468 Date: Mon Feb 19 08:23:15 2007 +0100
6470 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
6472 As spotted by Matthias Fuchs, the READY input should not be
6473 enabled for the NOR FLASH on the Sequoia board.
6477 commit 2605e90bf676d48123afe5719a846d2b52b24aac
6479 Date: Fri Feb 16 07:57:42 2007 +0100
6481 [PATCH] Added support for the jupiter board.
6485 commit 497d012e5be0194e1084073d0081eb1a844796b2
6487 Date: Mon Feb 12 13:11:50 2007 +0100
6489 LPC2292: patch from Siemens.
6491 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
6493 Date: Sat Feb 10 08:49:31 2007 +0100
6495 [PATCH] Add missing p3mx.h file to repository (ups)
6499 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
6501 Date: Fri Feb 9 10:45:42 2007 +0100
6503 [Motion-PRO] Preliminary support for the Motion-PRO board.
6505 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
6507 Date: Wed Feb 7 16:51:08 2007 +0100
6509 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
6511 Some boards that can have more than 768MBytes of SDRAM need to
6512 set "initrd_high", so that the initrd can be accessed by the
6517 commit 7372ca68227930d03cffa548310524cad5b96733
6519 Date: Fri Feb 2 12:44:22 2007 +0100
6521 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
6523 Previously the strapping DCR/SDR was read to determine if the internal PCI
6524 arbiter is enabled or not. This strapping bit can be overridden, so now
6525 the current status is read from the correct DCR/SDR register.
6529 commit 2aa54f651a42d198673318f07a20c89a43e4d197
6531 Date: Fri Feb 2 12:42:08 2007 +0100
6533 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
6537 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
6539 Date: Thu Feb 1 13:22:41 2007 +0100
6541 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
6543 When PCI PNP is enabled the pci pnp configuration routine is called
6544 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
6545 problems with some PCI cards. For now disable the PCI PNP configuration.
6549 commit 2902fadade3be7659467e8d074048c6b7068f5c0
6551 Date: Wed Jan 31 16:56:10 2007 +0100
6553 [PATCH] Update 440EPx/440GRx cpu detection
6557 commit d5ea287b02a6945c3977410e364a879dd1a555c8
6559 Date: Wed Jan 31 16:38:04 2007 +0100
6561 [PATCH] Update esd cpci5200 files
6565 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
6567 Date: Wed Jan 31 16:37:34 2007 +0100
6569 [PATCH] Add support for esd mecp5200 board
6573 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
6575 Date: Wed Jan 31 12:38:50 2007 +0100
6577 [PATCH] Remove unneccessary yellowstone board config file
6581 commit e802594b6fa1b166308820c276b96dc0d7cc731c
6583 Date: Tue Jan 30 17:06:10 2007 +0100
6585 [PATCH] Update Sequoia (440EPx) config file
6587 The config file now handles the 2nd target, the Rainier (440GRx)
6588 evaluation board better. Additionally the PPC input clock was
6589 adjusted to match the correct value of 33.0 MHz.
6593 commit 700200c67e73b83751418abe7815840dca8fd6cb
6595 Date: Tue Jan 30 17:04:19 2007 +0100
6597 [PATCH] Merge Yosemite & Yellowstone board ports
6599 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
6600 share one config file and all board specific files. This way we
6601 don't have to maintain two different sets of files for nearly
6606 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
6608 Date: Tue Jan 30 15:01:49 2007 +0100
6610 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
6612 SCPU doesn't use redundant environment in flash.
6616 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
6618 Date: Tue Jan 30 12:51:07 2007 +0100
6620 [PATCH] alpr: Update alpr board config file
6624 commit f8db84f132b1e335f20f96138a1f09ed97b08664
6626 Date: Tue Jan 30 00:50:40 2007 +0100
6628 LPC2292 SODIMM port coding style cleanup.
6630 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
6632 Date: Wed Jan 24 12:16:56 2007 +0100
6634 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
6636 commit 2daf046ba627f85f44195815778140039636244e
6638 Date: Tue Jan 23 17:22:06 2007 +0100
6640 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
6642 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
6644 Date: Tue Jan 23 14:21:14 2007 +0100
6646 [iDMR] Flash driver on initialisation write-protects some sectors,
6647 currently sectors 0-3. Sector 3 does not need to be protected, though
6648 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
6649 fixes this, i.e., only sectors 0-2 are protected.
6651 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
6653 Date: Tue Jan 23 14:11:22 2007 +0100
6655 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
6656 "mii device" results in "Unexpected exception"). Fixing this properly
6657 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
6658 this commit disables MII commads for now.
6660 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
6662 Date: Tue Jan 23 13:25:22 2007 +0100
6664 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
6665 Identification Register (CIR).
6667 commit fdef388758506765d4d6a7155c8f1584c63ff581
6669 Date: Mon Jan 22 13:19:21 2007 +0800
6671 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
6673 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
6676 commit a4012396645533aef218354eeba754dff0deace8
6678 Date: Fri Jan 19 23:08:39 2007 +0100
6682 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
6684 Date: Fri Jan 19 19:57:10 2007 +0100
6686 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
6690 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
6692 Date: Fri Jan 19 18:05:26 2007 +0100
6694 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
6695 if you must swap the bytes between reading/writing.
6696 (Needed for the SC3 board)
6700 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
6702 Date: Thu Jan 18 16:05:47 2007 +0100
6704 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
6708 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
6710 Date: Thu Jan 18 11:54:52 2007 +0100
6712 [PATCH] Update Prodrive P3Mx support
6716 commit 34167a36c29ee946b727465db5c014746a08e978
6718 Date: Thu Jan 18 11:48:10 2007 +0100
6720 [PATCH] Add missing Taishan config file
6724 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
6726 Date: Thu Jan 18 11:28:51 2007 +0100
6728 [PATCH] Fix: Compilerwarnings for SC3 board.
6729 The EBC Configuration Register is now by CFG_EBC_CFG definable
6730 Added JFFS2 support for the SC3 board.
6734 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
6736 Date: Thu Jan 18 10:25:34 2007 +0100
6738 [PATCH] Add support for AMCC Taishan PPC440GX eval board
6742 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
6744 Date: Tue Jan 16 18:30:50 2007 +0100
6746 Raname solidcard3 into sc3; add redundant env for sc3
6748 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
6750 Date: Tue Jan 16 12:46:35 2007 +0100
6752 Update default environment for Solidcard3
6754 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
6756 Date: Mon Jan 15 09:46:29 2007 +0100
6758 [PATCH] Fix 440SPe rev B detection from previous patch
6762 commit a443d31410c571ee8f970da819a44d698fdd6b1f
6764 Date: Sun Jan 14 13:35:31 2007 +0100
6766 [FIX] correct I2C Writes for the LM81 Sensor.
6770 commit 0bba5452835f19a61204edcda3a58112fd8e2208
6772 Date: Sat Jan 13 11:17:10 2007 +0100
6774 Undo commit 3033ebb2: reset command does not take any arguments
6776 Haiying Wang's modification to the reset command was broken, undo it.
6780 commit 95981778cff0038fd9941044d6a3eda810e33258
6782 Date: Sat Jan 13 08:01:03 2007 +0100
6784 [PATCH] Update 440SP(e) cpu revisions
6786 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
6790 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
6792 Date: Sat Jan 13 07:59:56 2007 +0100
6794 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
6796 Now the board revision and the current PCI bus speed are printed after
6799 Also the EBC initialising is now done via defines in the board config
6804 commit 36adff362c2c0141ff8a810d42a7e478f779130f
6806 Date: Sat Jan 13 07:59:19 2007 +0100
6808 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
6810 Now the board revision and the current PCI bus speed are printed after
6813 Also the EBC initialising is now done via defines in the board config
6818 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
6820 Date: Sat Jan 13 07:57:51 2007 +0100
6822 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
6824 Now the board revision and the current PCI bus speed are printed after
6829 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
6831 Date: Thu Jan 11 15:44:44 2007 +0100
6833 Added support for the SOLIDCARD III board from Eurodesign
6837 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
6839 Date: Wed Jan 10 14:41:14 2007 +0100
6841 Adjusted default environment for cam5200 board.
6843 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
6845 Date: Wed Jan 10 15:35:52 2007 +0100
6849 commit 787fa15860a57833e50bd30555079a9cd4e519b8
6851 Date: Wed Jan 10 01:28:39 2007 +0100
6853 Fix auto_update for MCC200 board.
6855 The invocation of do_auto_update() is moved to the end of the
6856 misc_init_r() function, after the flash mappings have been
6857 initialized. Please find attached a patch that implements that
6860 Also correct the decoding of the keypad status. With this update, the
6861 key that will trigger the update is Column 2, Row 2.
6863 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
6865 Date: Wed Jan 10 00:26:15 2007 +0100
6867 CAM5200 flash driver modifications:
6868 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
6869 - add second build target 'cam5200_niosflash' which still uses custom driver
6871 commit 67fea022fa957f59653b5238c7496f80a6b70432
6873 Date: Tue Jan 9 16:02:48 2007 +0100
6875 SPC1920: cleanup memory contoller setup
6877 commit 8fc2102faa23593c80381437c09f7745a14deb40
6879 Date: Tue Jan 9 14:57:14 2007 +0100
6881 Fix the cpu speed setup to work with all boards.
6883 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
6885 Date: Tue Jan 9 14:57:13 2007 +0100
6887 SPC1920: add support for the FM18L08 Ramtron FRAM
6889 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
6891 Date: Tue Jan 9 14:57:13 2007 +0100
6893 SPC1920: update the HPI register addresses to work with the second
6894 generation of hardware
6896 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
6898 Date: Tue Jan 9 14:57:13 2007 +0100
6900 Miscellanious spc1920 related cleanups
6902 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
6904 Date: Tue Jan 9 14:57:12 2007 +0100
6906 SPC1920 GO/NOGO led should be set to color red in U-Boot
6908 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
6910 Date: Tue Jan 9 14:57:12 2007 +0100
6912 Add support for the DS3231 RTC
6914 commit 8139567b60d678584b05f0718a681f2047c5e14f
6916 Date: Tue Jan 9 14:57:11 2007 +0100
6918 SMC1 uses external CLK4 instead of BRG on spc1920
6920 commit d8d9de1a02fbd880b613d607143d1f57342affc7
6922 Date: Tue Jan 9 14:57:10 2007 +0100
6924 Update the SPC1920 CMB PLD driver
6926 commit 3f34f869162750e5e999fd140f884f5de952bcfe
6928 Date: Tue Jan 9 14:57:10 2007 +0100
6930 Add / enable I2C support on the spc1920 board
6932 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
6934 Date: Tue Jan 9 14:57:10 2007 +0100
6936 Add support for the tms320671x host port interface (HPI)
6938 commit f4eb54529bb3664c3a562e488b460fe075f79d67
6940 Date: Sun Jan 7 00:13:11 2007 +0100
6942 Prepare for release 1.2.0
6944 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
6946 Date: Sat Jan 6 15:58:09 2007 +0100
6948 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
6950 This patch fixes a problem with an incorrect setup for the refresh
6951 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
6955 commit f16c1da9577f06c5fc08651a4065537407de4635
6957 Date: Sat Jan 6 15:56:13 2007 +0100
6959 [PATCH] Update ALPR board files
6961 This update brings the ALPR board support to the newest version.
6962 It also fixes a problem with the NAND driver.
6966 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
6968 Date: Fri Jan 5 11:46:05 2007 +0100
6970 [PATCH] nand: Fix problem with oobsize calculation
6974 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
6975 returns a 0x15. In the code fragment below bits [1:0] determine the
6976 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
6977 next field is also ANDed with 0x3. However this is a one bit field
6978 as defined in the Hynix and Samsung parts in the 4th ID byte that
6979 determins the oobsize, not a two bit field. It works on Samsung as
6980 bits[3:2] are 01. However for the Hynix there is a 11 in these two
6981 bits, so the oob size gets messed up.
6983 I checked the correct linux code and the suggested fix from Brian is
6984 also available in the linux nand mtd driver.
6988 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
6990 Date: Fri Jan 5 10:40:36 2007 +0100
6992 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
6994 This fix will make the MAL burst disabling patch for the Linux
6995 EMAC driver obsolete.
6999 commit 023889838282b6237b401664f22dd22dfba2c066
7001 Date: Fri Jan 5 10:38:05 2007 +0100
7003 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
7005 This code will optimize the DDR2 controller setup on a board specific
7008 Note: This code doesn't work right now on the NAND booting image for the
7009 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
7013 commit cce4acbb68398634b8d011ed7bb0d12269c84230
7015 Date: Thu Dec 28 19:08:21 2006 +0100
7018 - fix a typo in V38B config file
7019 - move watchdog initialisation earlier in the boot process
7020 - add "wdt=off" to default kernel command line (disables kernel watchdog)
7022 commit 92eb729bad876725aeea908d2addba0800620840
7024 Date: Wed Dec 27 01:26:13 2006 +0100
7026 Fix bug in adaption of Stefano Babic's CFI driver patch.
7028 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
7030 Date: Sun Dec 24 01:42:57 2006 +0100
7034 commit d784fdb05900ada3686d5778783e1fb328e9fb66
7036 Date: Tue Dec 12 00:22:42 2006 +0100
7038 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
7040 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
7042 Date: Fri Dec 22 14:29:40 2006 +0100
7044 [PATCH] Fix sequoia flash autodetection (finally correct)
7046 Now 32MByte and 64MByte FLASH is know to work and other
7047 configurations should work too.
7051 commit 82e5236a8b719543643fd26d5827938ab2b94818
7053 Date: Fri Dec 22 10:30:26 2006 +0100
7055 Minor code cleanup; update CHANGELOG.
7057 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
7059 Date: Thu Dec 21 17:17:02 2006 +0100
7061 Added support for the TQM8272 board from TQ
7065 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
7067 Date: Thu Dec 21 16:14:48 2006 +0100
7069 [PATCH] Add support for the UC101 board from MAN.
7073 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
7075 Date: Wed Dec 20 00:29:43 2006 +0100
7077 Fix to make the baudrate changes immediate for the MCF52x2 family.
7079 commit daa6e418bcc0c717752e8de939c213c790286096
7081 Date: Wed Dec 20 00:27:32 2006 +0100
7083 Preliminary support for the iDMR board (ColdFire).
7085 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
7087 Date: Fri Dec 8 16:23:08 2006 +0100
7089 automatic update mechanism
7091 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
7093 Date: Mon Dec 4 17:56:59 2006 +0800
7095 Slight code clean up.
7096 Add comments, delete duplicate define and remove spaces.
7099 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
7101 Date: Mon Dec 4 17:54:21 2006 +0800
7103 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
7104 multiplier table can not refect the real PLL clock behavior of these
7105 processors. Please refer to the hardware specification for detailed
7106 information of the corresponding processors.
7109 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
7111 Date: Mon Dec 4 14:46:23 2006 +0800
7113 Remove the static MAC address, ip address, server ip, netmask and
7114 gateway ip for network setting.
7117 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
7119 Date: Mon Dec 4 14:33:08 2006 +0800
7121 Remove the duplicate memory test code for mpc744ihpc2 board.
7122 If a memory test is needed, please use the functions in
7123 post/memory.c or memtest command.
7126 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
7128 Date: Fri Dec 1 19:01:25 2006 +0800
7130 Fix the exception occuring in RAM table search issue.
7131 The original search_one_table() function code can only processes the search
7132 for the exception occurring in FLASH/ROM, because the exception and fixup
7133 table usually locate in FLASH. If the exception address is also in
7134 FLASH, it will be OK.
7135 If the exception occurs in RAM, after the u-boot relocation, a
7136 relocation offset should be added.
7138 clean up the code in cpu/74xx_7xx/cpu.c
7142 commit ee311214e0d216f904feea269599d0934bf71f23
7144 Date: Fri Dec 1 11:47:36 2006 +0800
7146 Clean up the code according to codestyle:
7147 (1) remove some C++ comments.
7148 (2) remove trailing white space.
7149 (3) remove trailing empty line.
7150 (4) Indentation by table.
7151 (5) remove {} in one line condition.
7152 (6) add space before '(' in function call.
7153 Remove some weird printf () output.
7154 Add necessary comments.
7155 Modified Makefile to support building in a separate directory.
7157 commit dd520bf314c7add4183c5191692180f576f96b60
7159 Date: Thu Nov 30 18:02:20 2006 +0100
7163 commit 8d9a8610b8256331132227e9e6585c6bd5742787
7165 Date: Thu Nov 30 01:54:07 2006 +0100
7167 Code cleanup. Update CHANGELOG.
7169 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
7171 Date: Wed Nov 29 16:23:42 2006 +0100
7173 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
7175 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
7176 not the XLB frequency.
7178 This patch depends on the previous patches for MPC52xx device tree support
7183 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
7185 Date: Wed Nov 29 15:42:37 2006 +0100
7187 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
7189 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
7190 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
7191 quite similar and share the same board directory "prodrive/p3mx"
7192 and the same config file "p3mx.h".
7196 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
7198 Date: Wed Nov 29 12:53:15 2006 +0100
7200 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
7202 In the bootvx command the load address was only read from the env
7203 variable "loadaddr" and not optionally passed as paramter as described
7204 in the help. This is fixed with this patch. The behaviour is now the
7205 same as in the bootelf command.
7209 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
7211 Date: Wed Nov 29 12:03:57 2006 +0100
7213 [PATCH] include/ppc440.h minor error affecting interrupts
7215 Fixed include/ppc440.c for UIC address Bug
7217 Corrects bug affecting the addresses for the universal interrupt
7218 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
7223 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
7225 Date: Tue Nov 28 16:17:27 2006 -0600
7227 Make fsl-i2c not conflict with SOFT I2C
7231 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
7233 Date: Tue Nov 28 16:17:18 2006 -0600
7235 Fix I2C master address initialization.
7239 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
7241 Date: Tue Nov 28 23:31:19 2006 -0600
7243 Assign maintainers for mpc8349emds and mpc8360emds
7245 Dave for mpc8360emds, and me for mpc8349emds.
7247 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
7249 Date: Tue Nov 28 23:28:33 2006 -0600
7251 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
7253 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
7254 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
7256 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
7258 Date: Tue Nov 28 12:09:35 2006 -0600
7260 mpc83xx: Miscellaneous code style fixes
7262 Implement various code style fixes and similar changes.
7266 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
7268 Date: Tue Nov 28 17:55:49 2006 +0100
7270 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
7272 This patch adds the code and configuration necessary to boot with an
7273 arch/powerpc Linux kernel.
7278 commit e732faec95a83cb468b4850ae807c8301dde8f6a
7280 Date: Tue Nov 28 16:09:24 2006 +0100
7282 [PATCH] PPC4xx: 440SP Rev. C detection added
7286 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
7288 Date: Tue Nov 28 11:04:45 2006 +0100
7290 [PATCH] nand: Fix patch merge problem
7294 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
7296 Date: Tue Nov 28 11:04:45 2006 +0100
7298 [PATCH] nand: Fix patch merge problem
7302 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
7304 Date: Mon Nov 27 22:53:53 2006 +0100
7308 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
7310 Date: Mon Nov 27 17:43:25 2006 +0100
7312 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
7314 Patch below corrects the setting of the zmiifer register, it was
7315 overwritting the register rather than ORing the settings.
7320 commit d1a72545296800b7e219f93104ad5836f0003d66
7322 Date: Mon Nov 27 17:34:10 2006 +0100
7324 [PATCH] Select NAND embedded environment from board configuration
7326 The current NAND Bootloader setup forces the environment
7327 variables to be in line with the bootloader. This change
7328 enables the configuration to be made in the board include
7329 file instead so that it can be individually enabled.
7334 commit 15784862857c3c2214498defcfed84ff137fb81e
7336 Date: Mon Nov 27 17:22:19 2006 +0100
7338 [PATCH] nand_wait() timeout fixes
7340 Two fixes for the nand_wait() function in
7341 drivers/nand/nand_base.c:
7343 1. Use correct timeouts. The original timeouts in Linux
7344 source are 400ms and 20ms not 40s and 20s
7346 2. Return correct error value in case of timeout. 0 is
7352 commit da5553b095bf04f4f109ad7e565dae3aba47b230
7354 Date: Mon Nov 27 17:04:06 2006 +0100
7356 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
7358 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
7359 arguments to bootm. It removes the getenv("disable_of") test that used
7360 to be used for this purpose.
7365 commit a9398e018593782c5fa7d0741955fc1256b34c1e
7367 Date: Mon Nov 27 15:32:42 2006 +0100
7369 Minor code cleanup. Update CHANGELOG.
7371 commit 1729b92cde575476684bffe819d0b7791b57bff2
7373 Date: Mon Nov 27 14:52:04 2006 +0100
7375 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
7379 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
7381 Date: Mon Nov 27 14:49:51 2006 +0100
7383 [PATCH] alpr: remove unused board specific flash driver
7387 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
7389 Date: Mon Nov 27 14:48:41 2006 +0100
7391 [PATCH] 4xx: Fix problem with board specific reset code
7395 commit ec0c2ec725aec9524a177a77ce75559e644a931a
7397 Date: Mon Nov 27 14:46:06 2006 +0100
7399 [PATCH] Remove testing 4xx enet PHY setup
7403 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
7405 Date: Mon Nov 27 14:12:17 2006 +0100
7407 [PATCH] Update Prodrive ALPR board support (440GX)
7411 commit 58b485776698c3d71ec5a215e392123b4c15afa3
7413 Date: Mon Nov 27 11:51:21 2006 +0100
7415 Add a small README with information on the generic ohci driver.
7417 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
7419 Date: Mon Nov 27 11:46:46 2006 +0100
7421 Fix some endianness issues related to the generic ohci driver
7423 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
7425 Date: Mon Nov 27 11:44:58 2006 +0100
7427 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
7428 to choose between the old and the generic OHCI drivers.
7430 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
7432 Date: Mon Nov 27 11:43:09 2006 +0100
7434 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
7435 and adapted board configs TQM5200 and yosemite accordingly. This commit
7436 also makes the maximum number of root hub ports configurable
7437 (CFG_USB_OHCI_MAX_ROOT_PORTS).
7439 commit 78d620ebb5871d252270dedfad60c6568993b780
7441 Date: Thu Nov 23 22:58:58 2006 +0100
7443 Updates for TQM5200 modules:
7444 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
7445 - simplify "udate" definitions
7447 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
7449 Date: Wed Nov 22 13:20:50 2006 +0100
7451 [PATCH] PPC4xx start.S: Fix for processor errata
7453 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
7454 errata 1.12: 440_33 by moving patch up in code.
7459 commit 4ef6251403f637841000e0fef9e832aa01339822
7461 Date: Mon Nov 20 20:39:52 2006 +0100
7463 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
7467 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
7469 Date: Mon Nov 20 10:28:30 2006 +0100
7473 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
7475 Date: Mon Nov 13 13:55:24 2006 +0100
7477 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
7479 * Adds support for AMD command set Top Boot flash geometry reversal
7480 * Adds support for reading JEDEC Manufacturer ID and Device ID
7481 * Adds support for displaying command set, manufacturer id and
7483 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
7484 * Removes outdated change history (refer to git log instead)
7489 commit b21b511d4c50408f4853f46f06b601272196223f
7491 Date: Sun Nov 12 21:13:23 2006 +0100
7495 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
7497 Date: Sat Nov 11 22:48:22 2006 +0100
7499 Disable the watchdog in the default config for the V38B board.
7501 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
7503 Date: Sat Nov 11 22:43:00 2006 +0100
7505 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
7506 group is enabled for USB earlier (in cpu_init_f() instead of
7507 usb_lowlevel_init()).
7509 commit 91650b3e4de688038d4f71279c44858e3e2c6870
7511 Date: Mon Nov 6 17:06:36 2006 +0100
7513 Sequential accesses to non-existent memory must be synchronized,
7514 at least on G2 cores.
7516 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
7518 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
7520 Date: Fri Nov 3 19:15:00 2006 -0600
7522 mpc83xx: Update 83xx to use fsl_i2c.c
7524 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
7525 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
7526 Added multiple I2C bus support to fsl_i2c.c.
7530 commit d239d74b1c937984bc519083a8e7de373a390f06
7532 Date: Fri Nov 3 12:00:28 2006 -0600
7534 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
7536 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
7537 tree matches the other 8xxx trees.
7541 commit f7fb2e703ec9688541416962724adff70a7322cb
7543 Date: Thu Nov 2 19:47:11 2006 -0600
7545 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
7547 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
7549 Date: Thu Nov 2 18:05:50 2006 -0600
7551 mpc83xx: Fix the incorrect dcbz operation
7553 The 834x rev1.x silicon has one CPU5 errata.
7555 The issue is when the data cache locked with
7556 HID0[DLOCK], the dcbz instruction looks like no-op inst.
7558 The right behavior of the data cache is when the data cache
7559 Locked with HID0[DLOCK], the dcbz instruction allocates
7562 The 834x rev3.0 and later and 8360 have not this bug inside.
7564 So, when 834x rev3.0/8360 are working with ECC, the dcbz
7565 instruction will corrupt the stack in cache, the processor will
7568 However, the 834x rev1.x can work with ECC with these code,
7569 because the sillicon has this cache bug. The dcbz will not
7570 corrupt the stack in cache.
7571 Really, it is the fault code running on fault sillicon.
7573 This patch fix the incorrect dcbz operation. Instead of
7574 CPU FP writing to initialise the ECC.
7577 * Fix the incorrect dcbz operation instead of CPU FP
7578 writing to initialise the ECC memory. Otherwise, it
7579 will corrupt the stack in cache, The processor will checkstop
7584 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
7586 Date: Wed Nov 1 00:10:40 2006 -0600
7588 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
7590 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
7591 STDOUT_PATH configuration bits to mpc8349emds,
7592 mpc8349itx, and mpc8360emds board code.
7594 redo environment to use bootm with the fdtaddr
7595 for booting ARCH=powerpc kernels by default,
7596 and provide default fdtaddr values.
7598 commit 48041365b3420589ad464ebc7752e0053538b729
7600 Date: Wed Nov 1 00:07:25 2006 -0600
7602 mpc83xx: change ft code to modify local-mac-address property
7604 Update 83xx OF code to update local-mac-address properties
7605 for ethernet instead of the obsolete 'address' property.
7607 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
7609 Date: Tue Oct 31 21:23:16 2006 -0600
7611 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
7613 This patch also adds an improved I2C set_speed(), which handles all clock
7618 commit ac4b5622ce050b5ee1e154b98df630d778661632
7620 Date: Tue Oct 31 19:54:59 2006 -0600
7622 mpc83xx: add the README.mpc8360emds
7624 add doc/README.mpc8360emds to accompany the new board support
7626 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
7628 Date: Fri Nov 3 12:11:15 2006 -0600
7630 mpc83xx: add QE ethernet support
7632 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
7634 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
7636 Date: Fri Nov 3 19:33:44 2006 -0600
7638 mpc83xx: Add MPC8360EMDS basic board support
7640 Add support for the Freescale MPC8360EMDS board.
7641 Includes DDR, DUART, Local Bus, PCI.
7643 commit 23892e49352de74f7fac36ff90bb1be143d195e3
7645 Date: Tue Oct 31 19:30:40 2006 -0600
7647 mpc83xx: add the QUICC Engine (QE) immap file
7649 common QE immap file. Also required for 8360.
7651 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
7653 Date: Tue Oct 31 19:25:38 2006 -0600
7655 mpc83xx: Add 8360 specifics to 83xx immap
7657 Mainly add QE device dependencies, with appropriate 8360 protection.
7660 commit 988833324a7fda482c8ac3ca23eb539f8232e404
7662 Date: Tue Oct 31 19:14:41 2006 -0600
7664 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
7666 PREREQUISITE PATCHES:
7668 * This patch can only be applied after the following patches have been applied:
7670 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
7671 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
7675 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
7676 the clock for the 2nd USB board (Linux kernel will hang otherwise),
7677 and fix the CONFIG_BOOTARGS macro.
7681 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
7683 Date: Tue Oct 31 18:44:42 2006 -0600
7685 mpc83xx: Add support for the MPC8349E-mITX
7687 PREREQUISITE PATCHES:
7689 * This patch can only be applied after the following patches have been applied:
7691 1) DNX#2006090742000024 "Add support for multiple I2C buses"
7692 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
7693 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
7694 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
7695 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
7699 * Add support for the Freescale MPC8349E-mITX reference design platform.
7700 The second TSEC (Vitesse 7385 switch) is not supported at this time.
7704 commit 183da6d9b446cc12123455844ad1187e2375626f
7706 Date: Tue Sep 12 10:15:53 2006 -0400
7708 Additional MPC8349 support for multibus i2c
7712 Here is a patch for a file that was accidentally left out of a previous
7715 It accompanies the patch with ticket DNX#2006090742000024
7718 Change PCI initialization to use new multi-bus I2C API.
7723 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
7725 Date: Thu Sep 7 16:51:04 2006 -0400
7727 Multi-bus I2C implementation of MPC834x
7731 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
7732 family and the MPC8349EMDS board in particular.
7733 This patch requires Patch 1 (Add support for multiple I2C buses).
7734 Testing was performed on a 533MHz board.
7736 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
7741 Implemented driver-level code to support two I2C buses on the
7742 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
7743 are 50kHz, 100kHz and 400kHz on each bus.
7748 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
7750 Date: Thu Sep 7 16:50:54 2006 -0400
7752 Add support for multiple I2C buses
7756 Attached is a patch providing support for multiple I2C buses at the
7757 command level. The second part of the patch includes an implementation
7758 for the MPC834x CPU and MPC8349EMDS board.
7760 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
7766 1. Include new 'i2c' command (based on USB implementation) using
7767 CONFIG_I2C_CMD_TREE.
7769 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
7770 the commands to change bus number and speed are only available under the
7771 new 'i2c' command mentioned in the first bullet.
7773 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
7774 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
7775 of an array of bus-device pairs. Otherwise, it is an array of uchar.
7778 Added new 'i2c' master command for all I2C interaction. This is
7779 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
7780 setting I2C bus speed as well as changing the active bus if the board
7781 has more than one (conditionally compiled with
7782 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
7788 commit bed85caf872714ebf53013967a695c9d63acfc68
7790 Date: Tue Oct 31 18:13:36 2006 -0600
7792 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
7796 * Errata DDR6, which affects all current MPC 834x processors, lists changes
7797 required to maintain compatibility with various types of DDR memory. This
7798 patch implements those changes.
7802 commit afd6e470f639883002c7c59d562690a5cb0f4865
7804 Date: Wed Oct 25 18:45:23 2006 -0500
7806 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
7808 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
7810 Date: Tue Aug 22 17:07:00 2006 -0500
7812 mpc83xx: Add support for variable flash memory sizes on 83xx systems
7816 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
7817 window registers, instead of using a hard-coded value of 8MB.
7821 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
7823 Date: Thu Aug 3 18:38:13 2006 +0800
7825 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
7827 Unified TQM834x variable names with 83xx and consolidated macro
7828 in preparation for the 8360 and other upcoming 83xx devices.
7832 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
7834 Date: Wed Oct 25 14:41:21 2006 -0500
7836 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
7838 Incorporated the common unified variable names and the changes in preparation
7839 for releasing mpc8360 patches.
7843 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
7845 Date: Thu Aug 3 18:36:02 2006 +0800
7847 mpc83xx: Fix missing build for mpc8349emds pci.c
7849 Make pci build for mpc8349emds
7853 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
7855 Date: Thu Aug 3 18:39:49 2006 +0800
7857 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
7859 Removed unused file resetvec.S for mpc83xx cpu
7863 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
7865 Date: Sat Sep 30 00:32:59 2006 -0700
7867 NAND Flash verify across block boundaries
7869 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
7871 and the write crosses a block boundary. The pointer to the verification
7872 buffer (bufstart) is not being updated to reflect the starting of the
7874 block so the verification of the second block fails.
7878 * Fix NAND FLASH page verification across block boundaries
7880 commit f484dc791a3932537213c43c654cc1295c64b84c
7882 Date: Thu Sep 7 07:39:46 2006 -0700
7884 Added RGMII support to the TSECs and Marvell 881111 Phy
7886 Added a phy initialization to adjust the RGMII RX and TX timing
7887 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
7891 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
7893 Date: Fri Nov 3 13:10:00 2006 +0800
7895 Remove some unused CFG define.
7898 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
7900 Date: Fri Nov 3 13:07:36 2006 +0800
7902 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
7903 Both work. 0xFF000000 seems more reasonable.
7905 commit c59200443072353044aa4bf737a5a60f9a9af231
7907 Date: Thu Nov 2 15:15:01 2006 +0100
7909 Release U-Boot 1.1.6
7911 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
7913 Date: Thu Nov 2 19:14:48 2006 +0800
7915 This patch comes from Yuli's posted patch on 8/8/2006
7916 titled "CFI Driver Little-Endian write Issue".
7918 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
7920 If that patch applied, please discard this one.
7921 Until now , I do not see his patch is applied. So please apply this one.
7926 commit b825f158e449e1e9cf74c08e572955e122394c96
7928 Date: Thu Nov 2 19:12:31 2006 +0800
7930 Tsi108 on chip i2c support.
7932 The i2c Interface provides a master-only, serial interface that can be
7933 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
7939 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
7941 Date: Thu Nov 2 19:11:06 2006 +0800
7943 Tsi108 on chip pci controller support.
7945 If there is no pci card, the tsi108/109 pci configure read will
7946 cause a machine check exception to the processor. PCI error should
7947 also be cleared after the read.
7952 commit d1927cee977126e547ceeba23e4f978f377cfb8f
7954 Date: Thu Nov 2 19:08:55 2006 +0800
7956 Tundra tsi108 on chip Ethernet controller support.
7958 The following is a brief description of the Ethernet controller:
7959 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
7960 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
7961 to manage the two physical connection devices (PHYs). Each Ethernet port
7962 has its own statistics monitor that tracks and reports key interface
7963 statistics. Each port supports a 256-entry hash table for address
7964 filtering. In addition, each port is bridged to the Switch Fabric
7965 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
7967 Each Ethernet port also has a pair of internal Ethernet DMA channels to
7968 support the transmit and receive data flows. The Ethernet DMA channels
7969 use descriptors set up in memory, the memory map of the device, and
7970 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
7971 handles arbitration for the Switch Fabric. The Controller also
7972 has a register businterface for register accesses and status monitor
7975 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
7976 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
7977 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
7978 data flows to and from the Ethernet Controller through the Switch Fabric.
7980 Each Ethernet port uses its transmit and receive DMA channels to manage
7981 data flows through buffer descriptors that are predefined by the
7982 system (the descriptors can exist anywhere in the system memory map).
7983 These descriptors are data structures that point to buffers filled
7984 with data ready to transmit over Ethernet, or they point to empty
7985 buffers ready to receive data from Ethernet.
7990 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
7992 Date: Thu Nov 2 19:01:33 2006 +0800
7994 Tundra tsi108 header file.
7996 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
7997 PowerPC processors that offers numerous system interconnect options for
7998 embedded application designers. The Tsi108 can interconnect 60x or
7999 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
8000 and Flash. Provided the macro define for tsi108 chip.
8005 commit 87c4db09699c6b89176b31004afcb83eb1585d47
8007 Date: Thu Nov 2 18:59:15 2006 +0800
8009 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8010 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
8015 commit 27801b8ab11c61b577e45742a515bb3b23b80241
8017 Date: Thu Nov 2 18:57:21 2006 +0800
8019 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8020 Make ,config.mk and link file for the mpc7448hpc2 board.
8025 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
8027 Date: Thu Nov 2 18:55:04 2006 +0800
8029 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8030 The mpc7448hpc2 board support header file.
8035 commit 625bb5ddb50b243f931262ca8c46956409471917
8037 Date: Thu Nov 2 18:52:21 2006 +0800
8039 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8040 The mpc7448hpc2 board support low level assemble language init code.
8045 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
8047 Date: Thu Nov 2 18:49:51 2006 +0800
8049 General code modification for mpc7448hpc2 board support.
8050 1. Add 7447A and 7448 processor support.
8051 2. Add the following flags.
8053 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
8054 (such as by switch on board), this flag should be set.
8056 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
8057 relocates to RAM, this flag should be set.
8059 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
8060 system hang in exception, this flag should be set.
8062 There is a design issue for tsi108/109 pci configure read. When pci scan
8063 the slots, if there is no pci card, the tsi108/9 will cause a machine
8064 check exception for mpc7448 processor.
8069 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
8071 Date: Thu Nov 2 18:34:47 2006 +0800
8073 Add README file for mpc7448hpc2 board.
8076 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
8078 Date: Wed Nov 1 02:04:38 2006 +0100
8080 Finish up support for MarelV38B board
8081 - add watchdog support
8082 - enable GPIO_WKUP_7 pin for input
8085 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
8087 Date: Wed Nov 1 01:45:46 2006 +0100
8089 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
8090 * remove warnings when compiling ethaddr.c
8091 * adjust linker script (fixes a crash resulting from incorrect
8092 definition of __u_boot_cmd_start)
8093 - Some MarelV38B code cleanup.
8095 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
8097 Date: Wed Nov 1 01:38:16 2006 +0100
8099 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
8100 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
8101 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
8102 MPC5XXX_WU_GPIO_DATA_O for affected boards.
8104 - Add defintions for some MPC5XXX GPIO pins.
8106 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
8108 Date: Wed Nov 1 01:34:29 2006 +0100
8110 Changed MarelV38B board make target to lowercase. Config file cleanup.
8112 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
8114 Date: Sun Oct 29 01:03:51 2006 +0200
8116 Automatically adjust ARFLAGS so "make -s" is really silent.
8118 commit fae684e89844856383bdf101440889557df3e6b1
8120 Date: Sat Oct 28 16:45:00 2006 +0200
8122 [PATCH] omap925.c: Remove unused functions
8127 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
8129 Date: Sat Oct 28 17:12:58 2006 +0200
8131 [PATCH] Add some missing machtypes for netstar & voiceblue boards
8133 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
8139 commit 856f054410cef52d868feb330168b2a4c4091328
8141 Date: Sat Oct 28 15:55:52 2006 +0200
8143 [PATCH] NAND: Partition name support added to NAND subsystem
8145 chpart, nboot and NAND subsystem related commands now accept also partition
8146 name to specify offset.
8151 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
8153 Date: Sat Oct 28 02:29:44 2006 +0200
8157 commit 2751a95abd1b96911081c357e96a12fa97b40dee
8159 Date: Sat Oct 28 02:29:14 2006 +0200
8161 Enable commandline editing and hush shell on all TQM boards.
8163 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
8165 Date: Sat Oct 28 02:28:02 2006 +0200
8167 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
8169 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
8171 Date: Sat Oct 28 01:14:32 2006 +0200
8173 Check for illegal character '=' in environment variable names.
8175 Make sure the string passed as variable name does not contain a '='
8176 character. This not only prevents the common error or typing
8177 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
8178 also closes a backdoor which allowed to delete write-protected
8179 environment variables, for example by using "setenv ethaddr=".
8181 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
8183 Date: Sat Oct 28 00:38:39 2006 +0200
8187 commit e11887a77d81077416a2d1c5e0354916fee8c034
8189 Date: Thu Oct 26 17:55:31 2006 +0200
8191 Don't pass any debug options directly to the assembler
8193 When passing the -g option to gcc, gcc automatically selects a
8194 suitable --g<format> option to pass on to the assembler.
8195 Thus, there's no point in forcing a specific debug option on the
8196 assembler using the -Wa mechanism.
8200 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
8202 Date: Fri Oct 27 07:47:22 2006 -0500
8204 MPC86xx: Cleaned up unused and conditionally used local variables.
8208 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
8210 Date: Fri Oct 27 11:55:21 2006 +0200
8212 Fix "ar" flags in some Makefiles to allow for silent "make -s"
8214 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
8216 Date: Thu Oct 26 14:38:25 2006 -0400
8218 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
8219 to a TSEC (e.g. a switch is connected via RMII) or
8220 if the PHY is defective/incorrectly configured.
8224 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
8226 Date: Thu Oct 26 14:38:25 2006 -0400
8228 Fix TSEC driver: avoid crashes if PHY is not attached
8229 to a TSEC (e.g. a switch is connected via RMII) or
8230 if the PHY is defective/incorrectly configured.
8234 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
8236 Date: Thu Oct 26 16:24:31 2006 +0200
8240 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
8242 Date: Wed Oct 25 15:48:59 2006 +0200
8244 Finish up support for the ATSTK1000/ATSTK1002 boards
8246 Add atstk1002_config target to Makefile and move the AVR32 section
8247 down below Blackfin so that it doesn't end up in the middle of
8250 Drop the autogenerated linker script thing for now. Will have to
8251 revisit how to handle chips with different flash and RAM layout
8256 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
8258 Date: Tue Oct 24 23:47:37 2006 -0500
8260 Added support for Multi-Image files that contain a device tree
8262 If a Multi-Image file contains a third image we try to use it as a
8263 device tree. The device tree image is assumed to be uncompressed in the
8264 image file. We automatically allocate space for the device tree in memory
8265 and provide an 8k pad to allow more than a reasonable amount of growth.
8267 Additionally, a device tree that was contained in flash will now automatically
8268 get copied to system memory as part of boot. Previously an error was
8269 reported if one tried to boot a device tree that was in flash.
8273 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
8275 Date: Tue Oct 24 21:35:55 2006 +0200
8277 Switch to automatically generated CHANGELOG file.
8278 (use "make CHANGELOG" to update it from time to time)
8280 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
8282 Date: Tue Oct 24 18:06:48 2006 +0200
8284 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
8285 Patch by Stefan Roese, 24 Oct 2006
8287 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
8289 Date: Tue Oct 24 17:24:55 2006 +0200
8291 Merge with /home/wd/git/u-boot/master
8293 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
8295 Date: Tue Oct 24 15:32:57 2006 +0200
8299 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
8301 Date: Tue Oct 24 14:51:36 2006 +0200
8303 Move atstk1000 files into vendor specific directory.
8304 Patch by Haavard Skinnemoen, 12 Sep 2006
8306 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
8308 Date: Tue Oct 24 14:42:37 2006 +0200
8310 Add ATSTK1000 and ATSTK1002 board support
8311 Patch by Haavard Skinnemoen, 06 Sep 2006
8313 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
8316 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
8317 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
8318 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
8319 CompactFlash cards. For more information, please see this page:
8321 http://www.atmel.com/dyn/products/tools.asp?family_id=682
8323 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
8328 commit f93ae788c3640fcde5db383471d45548ff4060d0
8330 Date: Tue Oct 24 14:31:24 2006 +0200
8332 Add common serial driver for Atmel AT32 and AT91 chips
8333 Patch by Haavard Skinnemoen, 06 Sep 2006
8335 This is a first attempt at creating a common serial driver for Atmel
8336 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
8337 be possible to support AT91RM9200 and other ARM-based chips with some
8338 minor modifications.
8340 There's nothing fundamentally AVR32-specific in this driver, but it
8341 does use some features which are currently only defined for the
8343 * pm_get_clock_freq: Obtain the clock frequency of a given domain
8344 * gd->console_uart: A "struct device" containing information about
8345 register mappings, gpio resources and clocks associated with the
8348 For more information about these features, please see the "AT32AP
8351 commit 72a087e04705c26cad982879ebd06b5281bf825a
8353 Date: Tue Oct 24 14:27:35 2006 +0200
8355 Add AT32AP CPU and AT32AP7000 SoC support
8356 Patch by Haavard Skinnemoen, 06 Sep 2006
8358 This patch adds support for the AT32AP CPU family and the AT32AP7000
8359 chip, which is the first chip implementing the AVR32 architecture.
8361 The AT32AP CPU core is a high-performance implementation featuring a
8362 7-stage pipeline, separate instruction- and data caches, and a MMU.
8363 For more information, please see the "AVR32 AP Technical Reference":
8365 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
8367 In addition to this, the AT32AP7000 chip comes with a large set of
8368 integrated peripherals, many of which are shared with the AT91 series
8369 of ARM-based microcontrollers from Atmel. Full data sheet is
8372 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
8376 commit 7b64fef33c66be648826c0ff9758298ef13d0604
8378 Date: Tue Oct 24 14:21:16 2006 +0200
8380 Add AVR32 architecture support
8381 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
8383 This patch adds common infrastructure code for the Atmel AVR32
8384 architecture. See doc/README.AVR32 for details.
8388 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
8390 Date: Tue Oct 24 13:57:33 2006 +0200
8392 Use -g instead of -gstabs in AFLAGS_DEBUG
8393 Patch by Haavard Skinnemoen, 30 Aug 2006
8395 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
8396 matter what the target's preferred debugging format is. This patch
8397 simply replaces -gstabs with -g, so that the default debugging format
8398 for the architecture is used.
8400 commit 965829872169c2996023840d98e1d85ad148d629
8402 Date: Tue Oct 24 13:55:18 2006 +0200
8404 Fix/workaround broken dependency handling with make 3.81
8405 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
8407 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
8409 Date: Mon Oct 23 22:17:05 2006 +0200
8411 Fix sequoia separate object direcory building problems.
8413 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
8415 Date: Fri Oct 20 17:16:35 2006 -0500
8417 Use generic I2C register block on 85xx and 86xx.
8419 Replace private IMMAP I2C structures with generic reg block
8420 and allow 86xx to have multiple I2C device busses.
8424 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
8426 Date: Fri Oct 20 15:54:34 2006 -0500
8428 Fix compilation warnings on a few 85xx boards.
8432 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
8434 Date: Fri Oct 20 15:50:15 2006 -0500
8436 Converted all 85xx boards to use a common FSL I2C driver.
8437 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
8438 And removed hard i2c path from a few u-boot.lds scipts too.
8439 Minor whitespace cleanups along the way.
8443 commit 4d45f69e362b05892c9e92a7907e5820995612aa
8445 Date: Thu Oct 19 12:02:24 2006 -0500
8447 Rewrite a series of goto statements as a sequences of
8448 conditional expressions instead.
8450 Use consistent return code 0/-1 for good/bad indicators.
8452 Include one fewer file if the driver isn't used at all.
8456 commit 7237c033b02fe295880435f1eb80819a0c987532
8458 Date: Thu Oct 19 11:02:16 2006 -0500
8460 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
8462 in an effort to begin to unify the umpteen FSL I2C drivers that
8463 are all otherwise very similar.
8467 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
8469 Date: Thu Oct 19 11:33:52 2006 -0500
8471 * Fix a bunch of compiler warnings for gcc 4.0
8475 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
8477 Date: Tue Oct 17 06:14:31 2006 +0200
8479 Add monitor functions for indirect access to PPC440 DCR's
8480 Patch by Leonid Baryudin, 12 Oct 2006
8482 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
8484 Date: Fri Oct 13 16:47:53 2006 -0500
8486 Fixed leading whitespace issues.
8487 Removed spurious LAWAR thing.
8491 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
8493 Date: Thu Oct 12 10:42:36 2006 -0500
8495 Remove unneeded include files and local variable.
8499 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
8501 Date: Tue Oct 10 00:23:32 2006 -0600
8503 Fix possible uninitialized variable compiler warning.
8505 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
8506 do_bootm_linux() may be uninitialized. There is no possibility in the
8507 current code that len will get used uninitialized, but this fix follows
8508 the existing convention of setting both len and data to zero at the same
8513 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
8515 Date: Wed Oct 11 15:13:01 2006 -0500
8517 * Fix a bunch of compiler warnings for gcc 4.0
8521 commit bf651baa365e5447246aad6a633ccd667cf24a39
8523 Date: Wed Oct 11 10:10:43 2006 -0500
8525 Move "ar" flags to config.mk to allow for silent "make -s"
8527 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
8529 Date: Tue Oct 10 17:19:03 2006 -0500
8531 Coding style changes to remove local varible blocks
8532 and reformat a bit nicer.
8534 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
8536 Date: Tue Oct 10 17:16:04 2006 -0500
8538 Fix whitespace issues.
8540 commit 7b382b7125f2397cce63253df62f183e3dfa2770
8542 Date: Tue Oct 10 17:14:45 2006 -0500
8544 Fix whitespace issues.
8546 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
8548 Date: Tue Oct 10 17:06:53 2006 -0500
8550 Fix whitespace issues.
8552 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
8554 Date: Tue Oct 10 17:03:43 2006 -0500
8556 Ran lindent and cleaned up whitespace issues.
8557 Format for 80-columns too.
8559 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
8561 Date: Tue Oct 10 17:02:22 2006 -0500
8563 Fix whitespace and 80-col issues.
8565 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
8567 Date: Sat Oct 7 11:36:51 2006 +0200
8569 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
8570 Patch by Stefan Roese, 07 Oct 2006
8572 commit 5bc528fa4da751d472397b308137238a6465afd2
8574 Date: Sat Oct 7 11:35:25 2006 +0200
8576 Update ALPR code (NAND support working now)
8577 Patch by Stefan Roese, 07 Oct 2006
8579 commit 77d5034847d328753b80c46b83f960a14a26f40e
8581 Date: Sat Oct 7 11:33:03 2006 +0200
8583 Remove compile warnings in fpga code
8584 Patch by Stefan Roese, 07 Oct 2006
8586 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
8588 Date: Sat Oct 7 11:30:52 2006 +0200
8590 Add CONFIG_BOARD_RESET to configure board specific reset function
8591 Patch by Stefan Roese, 07 Oct 2006
8593 commit f55df18187e7a45cb73fec4370d12135e6691ae1
8595 Date: Fri Sep 29 08:23:12 2006 +0100
8597 Fix missing tCycle/modfreq calculation.
8601 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
8603 Date: Wed Sep 13 10:33:35 2006 -0500
8605 Updated config headers to add default FDT-based booting
8607 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
8609 Date: Wed Sep 13 10:34:18 2006 -0500
8611 Add support for eTSEC 3 & 4 on 8548 CDS
8613 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
8614 This will only work on rev 1.3 boards (but doesn't break older boards)
8615 * Cleaned up some comments to reflect the expanded role of tsec
8618 commit 084d648b109c8984f83674043c1a7fa3885ef801
8620 Date: Wed Sep 13 10:33:56 2006 -0500
8622 Added code to support 2.6.18 PCI changes in u-boot
8624 * Added code to swizzle the IRQ map for the PCI
8626 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
8628 Date: Tue Sep 19 09:34:10 2006 -0500
8630 Modified makefile for new build mechanism.
8634 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
8636 Date: Thu Sep 14 08:40:36 2006 -0500
8638 Handle 86xx SVR values according to the new Reference Manual.
8639 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
8640 by the byte in bits 16-23 instead.
8641 Thanks to Jason Jin for noticing.
8645 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
8647 Date: Mon Aug 28 14:25:31 2006 +0800
8649 Fixed an OF-tree off-by-one bug when adding a new property name.
8650 This bug will cause the kernel booting to pause a long time.
8653 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
8655 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
8657 Date: Tue Aug 29 11:05:09 2006 -0500
8659 Remove trailing empty lines.
8661 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
8663 Date: Tue Aug 29 09:48:49 2006 -0500
8665 Remove bogus msync and use volatile asm.
8667 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
8669 Date: Tue Aug 29 08:17:14 2006 -0500
8671 Add myself as maintainer for MPC8641HPCN.
8673 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
8675 Date: Mon Aug 28 14:25:31 2006 +0800
8677 Fixed an OF-tree off-by-one bug when adding a new property name.
8678 This bug will cause the kernel booting to pause a long time.
8682 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
8684 Date: Fri Aug 25 14:38:34 2006 -0400
8686 Change ramdiskaddr and dtbaddr
8687 Remove PEX fluff commands.
8692 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
8694 Date: Wed Aug 23 13:32:45 2006 -0500
8696 * Another small fix for booting with disable_of
8700 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
8702 Date: Wed Aug 23 11:04:43 2006 -0500
8704 Cleanup and lindent new AHCI driver.
8706 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
8708 Date: Wed Aug 23 19:15:12 2006 +0800
8710 Add AHCI define and sata support for MPC8641HPCN board.
8714 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
8716 Date: Wed Aug 23 19:10:44 2006 +0800
8718 Add AHCI support to u-boot
8720 Add AHCI support in u-boot, enable the sata disk controllers which
8721 following the AHCI protocol.
8725 commit d8ea2acf5f137cae99417df4f573d036ee384668
8727 Date: Wed Aug 23 17:54:32 2006 +0800
8729 Add dtb boot-up parameter to default boot commands.
8733 commit b93775c2036b99baa390ea425c4771895bbc63c4
8735 Date: Tue Aug 22 18:26:08 2006 -0500
8737 Cleanup even more poorly introduced whitespace.
8739 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
8741 Date: Tue Aug 22 18:07:00 2006 -0500
8743 Cleanup more poorly introduced whitespace.
8745 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
8747 Date: Tue Aug 22 17:54:05 2006 -0500
8749 Cleanup poorly introduced whitespace.
8751 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
8753 Date: Tue Aug 22 12:25:27 2006 -0500
8755 General indent and whitespace cleanups.
8757 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
8759 Date: Tue Aug 22 12:06:18 2006 -0500
8761 General indent and whitespace cleanups.
8763 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
8765 Date: Tue Aug 22 10:42:21 2006 -0500
8767 Cleanup compiler warnings.
8769 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
8771 Date: Tue Aug 22 09:31:59 2006 -0500
8773 Fix disable_of booting
8777 commit 87a449c8ac396420cb24260f717ea9e6faa82047
8779 Date: Tue Aug 22 09:23:55 2006 -0500
8781 Support for FDT in uImage format, error when using FDT from flash
8785 commit 75c299c38369d01addd5e054b8a16217b70f4a86
8787 Date: Tue Aug 15 15:12:55 2006 -0400
8789 Unlock cache before kernel starts up for MPC86xx
8791 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
8793 Date: Tue Aug 15 15:13:15 2006 -0400
8795 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
8797 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
8799 Date: Tue Aug 15 15:12:55 2006 -0400
8801 Unlock cache before kernel starts up for MPC86xx
8803 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
8805 Date: Tue Aug 15 15:13:15 2006 -0400
8807 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
8809 commit 86c8e17f25e972a7e272950a0735fad84e082b88
8811 Date: Wed Aug 16 13:59:47 2006 -0500
8813 * Fix disable_of booting
8817 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
8819 Date: Wed Aug 16 10:54:09 2006 -0500
8821 * Support for FDT in uImage format, error when using FDT from flash
8825 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
8827 Date: Tue Aug 15 14:22:35 2006 +0200
8829 Add initial support for the ALPR board from Prodrive
8830 NAND needs some additional testing
8831 Patch by Heiko Schocher, 15 Aug 2006
8833 commit f0ff4692ff3372dec55074a8eb444943ab095abb
8835 Date: Tue Aug 15 14:15:51 2006 +0200
8837 Add FPGA Altera Cyclone 2 support
8838 Patch by Heiko Schocher, 15 Aug 2006
8840 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
8842 Date: Mon Aug 14 15:33:38 2006 -0500
8844 Fix BAT0 to actually be cacheable, non-guarded as documented.
8848 commit 40bc83559db5745681909fd7382ae509567e116d
8850 Date: Wed Aug 9 15:32:16 2006 -0500
8852 Removed MPC8641HPCN DTS source file from build.
8853 It is no longer linked into U-Boot; its sources are
8854 now located in the kernel tree.
8858 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
8860 Date: Wed Jun 28 10:47:03 2006 -0500
8862 * Switched default PCI speed for 8540 ADS back to 33MHz
8864 * Added comments and a printf to warn that PCI-X won't
8866 Patch by Andy Fleming 17-Mar-2006
8870 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
8872 Date: Wed Jun 28 10:46:35 2006 -0500
8874 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
8878 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
8880 Date: Wed Jun 28 10:46:13 2006 -0500
8882 * Added VIA configuration table
8884 * Added support for PCI2 on CDS
8885 Patch by Andy Fleming 17-Mar-2006
8889 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
8891 Date: Wed Jun 28 10:45:41 2006 -0500
8893 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
8897 commit 97074ed9655309b64231bc2cee69fe85399f8055
8899 Date: Wed Jun 28 10:45:17 2006 -0500
8901 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
8905 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
8907 Date: Wed Jun 28 10:44:49 2006 -0500
8909 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
8913 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
8915 Date: Wed Jun 28 10:44:23 2006 -0500
8917 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
8921 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
8923 Date: Wed Jun 28 10:43:36 2006 -0500
8925 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
8929 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
8931 Date: Wed Jun 28 10:43:00 2006 -0500
8933 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
8935 commit 5498d90312aad9f6bdbf047986027c35b03cd163
8937 Date: Wed Jun 28 10:42:24 2006 -0500
8939 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
8941 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
8943 Date: Wed Jun 28 10:41:37 2006 -0500
8945 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
8947 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
8949 Date: Wed Aug 9 14:33:50 2006 +0100
8951 Add Rapidio support for the MPC8641HPCN
8955 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
8957 Date: Tue Aug 8 11:32:43 2006 +0100
8959 Fix caslat calculation
8963 commit 709d3073e74153278e7904a70819bbef7df50e1a
8965 Date: Thu Aug 3 16:17:56 2006 -0500
8967 Convert to mac-address in ethernet nodes.
8969 commit 71748af833ca1017edf1415be376366ff2937d17
8971 Date: Fri Jul 28 12:41:35 2006 -0400
8973 Correct the irq value of DUART2
8975 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
8977 Date: Fri Jul 28 12:41:41 2006 -0400
8979 Change the space size of PEX IO in README
8981 commit 239db37c94f7a92941c4465feceb867c609241c5
8983 Date: Fri Jul 28 12:41:18 2006 -0400
8985 Move get_board_sys_clk to board directory
8987 commit 492900b985439fbce1a118afde1e35def870db03
8989 Date: Fri Jul 28 09:03:54 2006 +0100
8991 Fix 8641HPCN pollution
8993 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
8995 Date: Fri Jul 28 08:16:06 2006 +0100
8997 Fix 8641HPCN timebase
8999 commit c86360b830f1eecd7a72208575dde4f57879faea
9001 Date: Fri Jul 28 00:01:34 2006 +0800
9003 Fixed OF device tree of mpc86xxhpcn board.
9005 The changes works in with kernel irq mapping rework.
9009 commit bea3f28d285942bf3f7ab339ce85178ded544225
9011 Date: Wed Jul 12 10:48:05 2006 -0400
9013 Add support for reading and writing mac addresses to or from ID EEPROM.
9015 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
9016 With attached patch, we can use command "mac/mac read/mac save/"
9017 to read and write EEPROM under u-boot prompt.
9019 U-boot will calculate the checksum of EEPROM while bootup,
9020 if it is right, then u-boot will check whether the mac address
9021 of eTSEC0/1/2/3 is availalbe (non-zero).
9023 If there is mac address availabe in EEPROM, u-boot will use it,
9024 otherewise, u-boot will use the mac address defined in
9025 MPC8641HPCN.h. This matches the requirement to set unique mac address
9031 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
9033 Date: Thu Jul 13 10:35:10 2006 -0500
9035 Fixed initrd issue by define big RAM
9039 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
9041 Date: Fri Jul 7 10:01:45 2006 -0500
9043 We made a u-boot patch to fix the hang up issue
9044 when booting filesystem from ramdisk.
9048 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
9050 Date: Wed Jun 28 10:47:03 2006 -0500
9052 * Switched default PCI speed for 8540 ADS back to 33MHz
9053 * Added comments and a printf to warn that PCI-X won't
9055 Patch by Andy Fleming 17-Mar-2006
9059 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
9061 Date: Wed Jun 28 10:46:35 2006 -0500
9063 * Fixed a bug where 8555 PCI code used the old variable and
9065 Patch by Andy Fleming 17-Mar-2006
9069 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
9071 Date: Wed Jun 28 10:46:13 2006 -0500
9073 * Added VIA configuration table
9074 * Added support for PCI2 on CDS
9075 Patch by Andy Fleming 17-Mar-2006
9079 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
9081 Date: Wed Jun 28 10:45:41 2006 -0500
9083 * Fixed PCI memory definitions
9084 Patch by Andy Fleming 17-Mar-2006
9088 commit 087454609e47295443af793a282cddcd91a5f49c
9090 Date: Wed Jun 28 10:45:17 2006 -0500
9092 * Added support for initializing second PCI bus on 85xx
9093 Patch by Andy Fleming 17-Mar-2006
9097 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
9099 Date: Wed Jun 28 10:44:49 2006 -0500
9101 * Added PCI-X #defines for PCI-X initialization
9102 Patch by Andy Fleming on 17-Mar-2006
9106 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
9108 Date: Wed Jun 28 10:44:23 2006 -0500
9110 * Made sure the code which disables prefetch for PCI devices
9111 sets the size of the prefetch region to 0
9112 Patch by Andy Fleming on 17-Mar-2006
9116 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
9118 Date: Wed Jun 28 10:43:36 2006 -0500
9120 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
9121 Patch by Jon Loeliger 17-Jan-2006
9125 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
9127 Date: Wed Jun 28 10:43:00 2006 -0500
9129 * Removed the oftree.dts for stxxtx in light of the changes
9130 to the flat device tree handling code
9131 Patch by Matthew McClintock 26-June-2006
9133 commit 1b380ec225665e73959677f3893dc658c5925e05
9135 Date: Wed Jun 28 10:42:24 2006 -0500
9137 * Patch to modify ft_build.c to update flat device trees in place
9138 Patch by Matthew McClintock 26-June-2006
9140 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
9142 Date: Wed Jun 28 10:41:37 2006 -0500
9144 * Modify bootm command to support booting with flat device trees
9145 Patch by Matthew McClintock 26-June-2006
9147 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
9149 Date: Wed Jun 28 08:43:56 2006 -0500
9151 Change Id to symbolic name for RTL8139
9155 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
9157 Date: Tue Jun 27 18:12:10 2006 +0800
9159 Fix RTL8139 in big endian
9164 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
9166 Date: Tue Jun 27 18:12:23 2006 +0800
9168 Fix Tsec bug when no link
9170 When tftp a non-exist file from the tftp server, u-boot will check
9171 the link of all eth port. The original file will return wrong link
9172 state on the no link ports.
9176 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
9178 Date: Tue Jun 27 18:12:02 2006 +0800
9180 Fix bug for io_bar size during pci scan
9182 During the pci scan process, Some devices return bar_reponse with the
9183 highest bytes 0, such as the pci bridge in uli1575 return bar_response
9184 with 0xffffff, So the bar_size should be manually set under 64K.
9188 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
9190 Date: Tue Jun 27 18:11:54 2006 +0800
9192 Enable PCIE1 for MPC8641HPCN board
9196 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
9198 Date: Mon Jun 26 11:06:00 2006 +0200
9202 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
9204 Date: Thu Jun 22 08:51:46 2006 -0500
9206 Fix bug in 8641hpcn reset command with no args.
9211 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
9213 Date: Tue Jun 20 17:47:15 2006 +0800
9215 Reworked IRQ mapping in OF-tree.
9217 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
9219 Date: Thu Jun 15 21:33:37 2006 -0500
9221 Do not enable address translation on secondary CPUs.
9222 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
9226 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
9228 Date: Wed Jun 14 18:14:56 2006 +0200
9232 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
9234 Date: Wed Jun 14 17:45:53 2006 +0200
9236 Various USB related patches
9237 - Add support for mpc8xx USB device.
9238 - Add support for Common Device Class - Abstract Control Model USB console.
9239 - Add support for flow control in USB slave devices.
9240 - Add support for switching between gserial and cdc_acm using environment.
9241 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
9242 - Update usbcore slightly to ease host enumeration.
9243 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
9244 - Add AdderUSB_config as a defconfig to enable usage of the USB console
9245 by default with the Adder87x U-Boot port.
9248 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
9250 Date: Wed Jun 7 10:53:55 2006 -0500
9252 Fix a get_board_sys_clk() use-before-def warning.
9256 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
9258 Date: Wed Jun 7 10:52:49 2006 -0500
9260 Allow DTC path to be passed in.
9264 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
9266 Date: Tue Jun 6 16:54:29 2006 -0400
9268 Modify the IRQ of DUART2
9270 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
9272 Date: Wed May 31 13:55:35 2006 -0500
9278 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
9280 Date: Wed May 31 12:44:44 2006 -0500
9282 White space cleanup.
9283 Some 80-column cleanups.
9284 Convert printf() to puts() where possible.
9285 Use #include "spd_sdram.h" as needed.
9286 Enhanced reset command usage message a bit.
9290 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
9292 Date: Wed May 31 11:39:34 2006 -0500
9294 Removed unneeded local_bus_init() from 8641HPCN board.
9298 commit 4d3d729c16c392d2982d3266b659d333c927697d
9300 Date: Wed May 31 11:24:28 2006 -0500
9302 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
9306 commit b2a941de060350ad15878d8219825f4950e9bb8e
9308 Date: Wed May 31 10:07:28 2006 -0500
9310 Remove dead debug code.
9314 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
9316 Date: Tue May 30 17:47:00 2006 -0500
9318 Move mpc86xx PIXIS code to board directory
9320 First cut at moving the PIXIS platform code out of
9321 the 86xx cpu directory and into board/mpc8641hpcn
9326 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
9328 Date: Tue May 30 16:56:14 2006 +0200
9330 Support generic OHCI support for the s3c24x0 cpu.
9332 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
9334 Date: Tue May 30 09:10:32 2006 -0500
9336 Improve "reset" command's interaction with watchdog.
9338 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
9339 "reset altbank wd" will reset another bank WITH watch dog enabled
9340 "diswd" will disable watch dog after u-boot boots up successfully
9344 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
9346 Date: Tue May 30 08:51:19 2006 -0500
9348 Fix two SDRAM setup bugs.
9351 Enable 1T/2T based on number of DIMMs present.
9355 commit d11fec5015334deb2010e36ce00bb118cc5429a5
9357 Date: Fri May 26 10:24:48 2006 -0500
9359 Add first draft of the MPC8641HPCN doc/README.
9363 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
9365 Date: Fri May 26 10:13:04 2006 -0500
9367 Added pci@8000 block.
9368 Updated ethernet interrupt mappings (moved up 48).
9369 Cleaned up a few comments.
9373 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
9375 Date: Fri May 26 10:01:16 2006 -0500
9377 Allow args on reset command.
9381 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
9383 Date: Tue May 23 13:38:35 2006 +0200
9385 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
9386 fixes to the latter.
9388 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
9390 Date: Tue May 23 10:33:11 2006 +0200
9392 More cleanup for the delta board and the generic usb_ohci driver. Added
9393 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
9394 initialization and cleanup hooks respectively.
9396 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
9398 Date: Mon May 22 16:33:54 2006 +0200
9400 This patch adds USB storage support for the delta board. This is the first
9401 board to make use of a generic OHCI driver, that calls hooks for board
9402 dependant initialization.
9404 commit 14e37081ff3cac7ebe6e93836523429853b6b292
9406 Date: Fri May 19 13:28:39 2006 -0500
9408 Change arbitration to round-robin for SMP linux.
9410 commit 9a655876e5995be80f49054e2509500e871e4d3a
9412 Date: Fri May 19 13:26:34 2006 -0500
9414 Enable dual DDR controllers and interleaving.
9416 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
9418 Date: Fri May 19 13:22:44 2006 -0500
9420 Update 86xx address map and LAWBARs.
9422 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
9424 Date: Fri May 19 13:14:15 2006 -0500
9426 Remove L2 Cache invalidate polling.
9428 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
9430 Date: Fri May 19 12:33:09 2006 -0500
9432 Enable 2nd CPU and I2C.
9434 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
9436 Date: Mon May 15 07:26:56 2006 -0500
9438 Update interrupt mapping.
9440 commit 6cfea33477b04b63ed47386ed1629529484c33ba
9442 Date: Wed May 10 09:38:06 2006 -0500
9444 Remove unneeded INIT_RAM_LOCK cache twiddling.
9445 Correctly tracks r29 as global data pointer now.
9449 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
9451 Date: Wed May 10 09:33:07 2006 -0500
9453 Remove unnecessary flash.c file.
9455 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
9457 Date: Tue May 9 08:23:49 2006 -0500
9459 Get MPC8641HPCN flash images working.
9461 Enable the CFI driver.
9462 Remove bogus LAWBAR7 cruft.
9463 Use correct TEXT_BASE, Fixup load script.
9464 Enable SPD EEPROM during DDR setup.
9465 Use generic RFC 1918 IP addresses by default.
9467 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
9469 Date: Thu Apr 27 10:15:16 2006 -0500
9471 Cleanup whitespaces and style issues.
9472 Removed //-style comments.
9473 Use 80-column lines.
9474 Remove trailing whitespace.
9475 Remove dead code and debug cruft.
9477 commit a2320a6bf8113a09544c42d160d10ac69d049a03
9479 Date: Thu Apr 27 08:22:39 2006 -0500
9481 Revert bad PCI prefetch limit change.
9483 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
9485 Date: Wed Apr 26 17:58:56 2006 -0500
9487 Initial support for MPC8641 HPCN board.
projects / J-u-boot.git / blob