1 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
3 Date: Wed Jan 9 16:56:54 2008 -0600
5 Add QE brg freq and correct qe bus freq fdt update code
10 commit 890dfef06c2d169a3356359596890754dfb8ee1c
12 Date: Wed Jan 9 16:34:51 2008 -0600
14 Remove cache config from ATUM8548 and sbc8548 configs
16 These boards weren't updated by Kumar's config patch because they
17 weren't in the tree, yet.
21 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
23 Date: Mon Jan 7 13:31:19 2008 -0600
25 85xx: add ability to upload QE firmware
27 Define the layout of a binary blob that contains a QE firmware and instructions
28 on how to upload it. Add function qe_upload_firmware() to parse the blob and
29 perform the actual upload. Add command-line command "qe fw" to take a firmware
30 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
31 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
32 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
36 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
38 Date: Tue Jan 8 01:22:21 2008 -0600
40 85xx: Remove cache config from configs.h
42 Either use the standard defines in asm/cache.h or grab the information
43 at runtime from the L1CFG SPR.
45 Also, minor cleanup in cache.h to make the code a bit more readable.
49 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
51 Date: Fri Dec 21 10:39:27 2007 -0500
53 mpc85xx: Add support for ATUM8548 (updated)
55 Add support for Instituto Atlantico's ATUM8548 board
60 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
62 Date: Fri Dec 21 10:36:37 2007 -0500
64 mpc85xx: Add support for ATUM8548 (updated)
66 Add support for Instituto Atlantico's ATUM8548 board
70 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
72 Date: Thu Dec 13 06:45:14 2007 -0600
74 mpc85xx: Add support for SBC8548 (updated)
76 Add support for Wind River's SBC8548 reference board.
80 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
82 Date: Thu Dec 13 06:45:08 2007 -0600
84 mpc85xx: Add support for SBC8548 (updated)
86 Add support for Wind River's SBC8548 reference board.
91 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
93 Date: Mon Oct 22 19:58:19 2007 +0400
95 MPC8568E-MDS: set up QE pario for UART1
97 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
98 be set up appropriately.
102 commit ad162249cb371e9e38971676f09be791e5f3cf4a
104 Date: Mon Oct 22 18:12:46 2007 +0400
106 MPC8568E-MDS: reset UCCs to use them reliably
108 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
111 p.s Similar code exists in the Linux kernel board file (for capability
112 reasons with older U-Boots), but should be removed some day.
116 commit 2146cf56821c3364786ca94a7306008c5824b238
118 Date: Wed Dec 19 01:18:15 2007 -0600
120 Reworked FSL Book-E TLB macros to be more readable
122 The old macros made it difficult to know what WIMGE and perm bits
123 were set for a TLB entry. Actually use the bit masks for these items
124 since they are only a single bit.
126 Also moved the macros into mmu.h out of e500.h since they aren't specific
131 commit 1d47273d46925929f8f2c1913cd96d7257aade88
133 Date: Tue Dec 18 23:21:51 2007 -0600
135 Use FSL Book-E MMU macros from Linux Kernel
137 Grab the FSL Book-E MAS register macros from Linux. Also added
138 defines for page sizes up to 4TB and removed SHAREN since it doesnt
143 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
145 Date: Wed Jan 9 13:51:32 2008 -0600
147 Fix my own merge stupidity
149 Way back in August I merged Heiko's patch:
150 566a494f592: [PCS440EP] upgrade the PCS440EP board
152 with Jon's CONFIG_COMMANDS patches.
154 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
156 However, in the process, I left out some of Heiko's good changes.
158 Now Heiko's and Jon's patches are properly merged in fat_register_device()
162 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
164 Date: Wed Jan 9 11:17:49 2008 -0600
166 Expose parse_line() globally.
168 Add new function readline_into_buffer() that allows the
169 output of readline to be put into a pointer to char buffer.
171 This refactoring allows other functions besides the
172 main command loop to also use the same input mechanism.
177 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
179 Date: Wed Jan 9 01:15:25 2008 +0100
181 trivial: fix consequences of a bad merge
183 Fix what looks like a merge artifact.
187 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
189 Date: Thu Jan 3 10:51:15 2008 +0800
191 Add Ctrl combo key support to usb keyboard driver.
193 Ctrl combo key support is added, which is very useful to input Ctrl-C
194 for interrupt current job.
195 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
196 key input when tstc() is called.
200 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
202 Date: Sun Dec 30 03:30:56 2007 +0100
208 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
210 Date: Sun Dec 30 03:30:46 2007 +0100
212 fix comments with new drivers organization
216 commit a9b410dc7d2a4721c408b13abfc037988150f145
218 Date: Fri Dec 28 12:50:59 2007 +0900
220 Remove the obsolete terse version of do_mii()
222 We now have more useful version of do_mii() and everybody use it.
223 Gerald Van Baren says:
225 > When I originally wrote the mii command 6(!) years ago, I wrote a
226 > verbose version that printed human readable decomposition of the flags,
227 > etc., and a terse one that didn't print as much stuff and thus had a
228 > smaller memory footprint.
230 > It sounds like the terse version has withered and died, apparently
231 > people are only using the verbose version (which is very understandable,
237 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
239 Date: Thu Dec 27 13:42:56 2007 -0500
241 Do not reference sha1.c when building mkimage.
243 remove sha1.o from mkimage linking since it isn't actually used.
247 commit b9173af73e524d37c812f210173cf83385c5171a
249 Date: Thu Dec 27 15:39:54 2007 +0900
251 common/cmd_mii.c: Add sanity argc check
253 If type mii command without arguments, we suffer from uninitialized argv[]
254 entries; for example we MIPS get stuck by TLB error.
258 commit 500856eb1707ed17d9204baa61dd59948d3b2899
260 Date: Wed Jan 9 19:39:36 2008 +0100
262 API for external applications.
264 This is an API for external (standalone) applications running on top of
265 U-Boot, and is meant to be more extensible and robust than the existing
266 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
269 Included is the demo application using this new framework (api_examples).
271 Please note this is still an experimental feature, and is turned off by
276 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
278 Date: Wed Jan 9 18:05:27 2008 +0100
282 The newly introduced API (routines related to env vars) will need to call
287 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
289 Date: Wed Jan 9 15:14:46 2008 +0100
291 Coding Style cleanup, update CHANGELOG
295 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
297 Date: Tue Dec 18 04:29:55 2007 -0500
299 fix easylogo on big endian dev systems
301 didnt realize how out of shape easylogo actually was until i tried using it.
302 this patch does byte swapping as need be on the input tga header since the tga
303 is in little endian but the host could just as well be big endian. i didnt
304 bother using bswap macros or such stuff from system headers as nothing in
305 POSIX dictates byte swapping functionality.
309 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
311 Date: Tue Dec 18 03:23:25 2007 -0500
315 - make the Makefile not suck
316 - include proper headers for prototypes
317 - fix obvious broken handling of strchr() when handling '.' in filenames
321 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
323 Date: Thu Dec 13 21:23:28 2007 -0500
325 Fix build problems under Cygwin
327 This patch allows u-boot to build without error in a cygwin
328 environment. Cygwin does not define __u64 in it's
329 include/asm/types.h file. The -idirafter flag in the u-boot
330 build causes the inclusion of the cygwin types.h file as opposed
331 to u-bot/include/asm/types.h file which does define __u64.
332 Subsequently, sha1.c compile fails due to unknown symbol.
336 commit 43ef1c381f9195504a2488f5cb909227eb97d475
338 Date: Fri Nov 30 17:29:59 2007 +0100
340 cmd_bmp: Add support for displaying gzip compressed bmps
342 The existing code can show information about a gzip compressed BMP
343 image, but can't actually display it.
345 Therefore, move the decompression code out of bmp_info() and use it in
346 bmp_display() as well in order to display a compressed BMP image.
348 Also, clean things up a bit and fix a memory leak while we're at it.
353 commit d197ffd8172c6fdef38733424640a9a47295d6e9
355 Date: Thu Nov 29 21:15:56 2007 +0100
357 Fix and optimize MII operations on FEC (MPC8xx) controllers
359 This patch fixes several issues at least on a MPC885 based system with two
360 FEC interfaces used in MII mode.
362 1. PHY discovery should first read PHY_PHYIDR2 register and only then
363 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
364 otherwise the values read are wrong. Also notice, that PHY discovery
365 cannot work on MPC88x / MPC87x in setups with both FECs active at all
366 in its present form, because for both interfaces the registers from FEC
367 1 are used to communicate over MII.
369 2. Remove code duplication for resetting the FEC by isolating it into a
372 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
374 4. Optimize mii_init() to only reset the FEC 1 controller once.
376 5. Fix a typo in mii_init() using index i instead of j thus potentially
377 leading to unpredictable results.
381 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
383 Date: Tue Nov 20 13:14:20 2007 +0100
385 Fix endianness conversions in rtl8169 driver
387 It is unclear on what platforms this driver has been tested, since
388 noone up to now defines CONFIG_RTL8169 in the board configuration
389 header. Now it has been fixed for a big-endian mpc8241 based
390 linkstation platform. This patch presents the necessary endianness
395 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
397 Date: Thu Jan 3 10:51:15 2008 +0800
399 Add Ctrl combo key support to usb keyboard driver.
401 Ctrl combo key support is added, which is very useful to input Ctrl-C
402 for interrupt current job.
403 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
404 key input when tstc() is called.
409 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
411 Date: Wed Jan 9 13:43:38 2008 +0100
413 Coding Style clenaup; update CHANGELOG
417 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
419 Date: Thu Dec 27 17:13:11 2007 +0100
421 Remove bit swapping in Xilinx Spartan bitfile loading
423 This patch removes the unnecessary bit swapping when
424 booting .bit files with the 'fpga loadb' command.
428 commit 437fc7327f0611f82937858f2d80e4cd61b40984
430 Date: Thu Dec 27 17:13:05 2007 +0100
432 Fix MSB check in Xilinx Spartan slave serial mode
436 commit 3bff4ffa33729a42645e328a21e8d16488872958
438 Date: Thu Dec 27 17:12:56 2007 +0100
440 Add new Xilinx Spartan FPGA types
444 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
446 Date: Thu Dec 27 17:12:43 2007 +0100
448 Add pre and post configuration callbacks for Spartan FPGAs
450 This patch adds a post configuration callback for Spartan2/3 FPGAs.
451 pre and post configuration callback are now optional and
452 not called when the function pointer is set to NULL.
456 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
458 Date: Thu Dec 27 17:12:34 2007 +0100
460 Improve configuration of FPGA subsystem
462 This patch removes the FPGA subsystem configuration through
463 the CONFIG_FPGA bitmask configuration option.
465 See README for the new options:
468 CONFIG_FPGA_<vendor>,
473 commit 95c6bc7d4a3588b452baca610f8c795a83630477
475 Date: Thu Dec 27 16:55:17 2007 +0100
477 Add Epson RX8025 RTC support
481 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
483 Date: Thu Dec 27 16:57:23 2007 +0100
485 serial: Make default_serial_console() a weak function
487 With this patch it is possible to reimplement default_serial_console()
488 in board specific code. This will be done in the upcomming PMC440
489 U-Boot port. This also allows the lwmon board maintainer to
490 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
494 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
496 Date: Wed Dec 19 14:14:47 2007 +0100
498 add 'terminal program' functionality
500 This patch adds a 'cu' like serial terminal command to u-boot
501 using which you can access other serial ports from the system console.
503 OpenMoko uses this in their Neo1973 phones to get access to the GSM
504 Modem and GPS chip from the bootloader.
508 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
510 Date: Wed Dec 19 14:12:53 2007 +0100
512 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
513 that used to exist with the legacy NAND code
517 commit f540c42d9564854b19ce9bbb70affe172529fe70
519 Date: Wed Dec 19 14:09:58 2007 +0100
521 Fix building with CRAMFS but not JFFS2 support
525 commit 23d0baf967fecdaf1804f045f6339337c5607eec
527 Date: Sat Dec 22 15:52:58 2007 +0100
529 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
534 commit 23776ff292966a85d811126933830bed48211826
536 Date: Tue Dec 11 10:53:12 2007 +0100
538 ARM: support board-specific ethernet PHY init
540 Add until the new phylib will be arrived
544 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
546 Date: Sat Dec 8 16:34:08 2007 +0100
548 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
552 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
554 Date: Sun Dec 9 11:01:10 2007 +0100
556 Add missing file in gitignore and comments
558 based on Linux source tree's .gitignore files
562 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
564 Date: Wed Jan 9 11:36:21 2008 +0100
566 Coding Style cleanup, update CHANGELOG
570 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
572 Date: Wed Jan 9 10:38:58 2008 +0100
574 POST: Execute SPR test after relocation
576 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
577 self modifying code and this doesn't work with stack in d-cache, since
578 I can't move the code from d-cache to i-cache. We move the SPR test to
579 be executed a little later, after relocation. Then stack is located in
580 SDRAM and this self-modifying code is no problem anymore.
584 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
586 Date: Wed Jan 9 10:28:20 2008 +0100
588 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
590 This patch configures the LWMON5 port to use d-cache as init-ram and
591 the unused GPT0_COMP6 as POST WORD storage.
595 commit 1754f50b710194f886b6f2831803d8960171a14d
597 Date: Wed Jan 9 10:25:46 2008 +0100
599 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
601 The privious 4xx POST implementation only supported storing the POST
602 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
603 we need to store the POST WORD in some other non volatile location.
604 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
609 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
611 Date: Wed Jan 9 10:23:16 2008 +0100
613 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
615 This patch adds support for locking the init-ram/stack in d-cache,
616 so that other regions may use d-cache as well
618 Note, that this current implementation locks exactly 4k of d-cache,
619 so please make sure that you don't define a bigger init-ram area. Take
620 a look at the lwmon5 440EPx implementation as a reference.
624 commit 0ddb89601a8d29e808db450366752ffdc6267c53
626 Date: Wed Jan 9 10:16:33 2008 +0100
628 Fix memset bug in ext2fs_read_file()
630 ext2fs_read_file() had the function arguments swapped.
632 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
636 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
638 Date: Tue Jan 5 08:17:15 1988 +0100
640 Fix problems with usb storage devices on MPC5200 /TQM5200
642 The MPC5200 OHCI controller operates in big endian, so
643 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
647 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
649 Date: Tue Jan 8 22:58:27 2008 +0100
651 Fix compile problem with new env code.
655 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
657 Date: Tue Nov 27 10:23:20 2007 +0100
659 tools: fix fw_printenv tool to compile again
661 This patch updates the fw_printenv/fw_setenv userspace tool to include
662 the correct MTD header in order to compile against current kernel
663 headers. Backward compatibility is preserved by introducing an option
664 MTD_VERSION which can be set to "old" for compilation using the old MTD
665 headers. Along with this a number of warnings are fixed.
669 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
671 Date: Tue Jan 8 15:40:09 2008 +0100
673 ppc4xx: assign PCI interrupts on seuqoia boards
675 Some operating systems rely on assigned PCI interrupts.
679 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
681 Date: Tue Jan 8 15:50:49 2008 +0100
683 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
685 This patch allows the use of 4xx interrupt vector number defines
686 in board specific code outside cpu/ppc4xx.
690 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
692 Date: Tue Jan 8 15:39:01 2008 +0100
694 ppc4xx: Fix UIC2 vector number base
698 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
700 Date: Tue Jan 8 12:49:58 2008 +0100
702 ppc4xx: Update PLB/PCI divider for PMC440 board
704 This patch updates the PLB/PCI divider when running at
705 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
709 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
711 Date: Tue Jan 8 11:13:09 2008 +0100
713 ppc4xx: Disable error message when no NAND chip is installed on PMC440
715 Add CFG_NAND_QUIET_TEST option to disable error message when
716 no NAND chip is installed on PMC440 boards.
718 Disable a couple of config defines that are only used for NAND_U_BOOT.
722 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
724 Date: Tue Jan 8 22:58:27 2008 +0100
726 Fix compile problem with new env code.
730 commit 6de66b35426312a21174a9bf0576a094e2904bea
732 Date: Tue Nov 27 10:23:20 2007 +0100
734 tools: fix fw_printenv tool to compile again
736 This patch updates the fw_printenv/fw_setenv userspace tool to include
737 the correct MTD header in order to compile against current kernel
738 headers. Backward compatibility is preserved by introducing an option
739 MTD_VERSION which can be set to "old" for compilation using the old MTD
740 headers. Along with this a number of warnings are fixed.
744 commit ad3006fe7e84667021753b74247b0bafd97ba35f
746 Date: Mon Jan 7 23:47:32 2008 -0500
748 LIBFDT: use memmove() instead of memcpy()
750 This is partial patch from the DTC/libfdt
751 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
753 Date: Wed Nov 21 11:56:14 2007 +1100
755 The patch also fixes one genuine bug caught by valgrind -
756 _packblocks() in fdt_rw.c was using memcpy() where it should have been
761 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
763 Date: Mon Dec 17 14:42:07 2007 +1100
765 libfdt: Add more documentation (patch the seventh)
767 This patch adds more documenting comments to libfdt.h. Specifically,
768 these document the read/write functions (not including fdt_open_into()
769 and fdt_pack(), for now).
773 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
775 Date: Mon Dec 17 14:41:52 2007 +1100
777 libfdt: Add more documentation (patch the sixth)
779 This patch adds some more documenting comments to libfdt.h.
780 Specifically this documents all the write-in-place functions.
784 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
786 Date: Sat Dec 29 22:45:27 2007 -0500
788 Fine grained per property /chosen updating.
790 Implement a suggestion by Scott Wood to make the /chosen handling fine
791 grained. Don't overwrite pre-existing properties on a per-property basis,
792 so if /chosen exists but a necessary /chosen/property doesn't, it gets
793 created. If a /chosen property exists, it is NOT overwritten unless the
794 "force" flag is true.
798 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
800 Date: Sat Jan 5 15:33:29 2008 -0500
802 Improve the FDT help message.
804 Add a note that "fdt copy" makes the new address active.
805 Remove most of the extra hints at the end of the fdt help.
809 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
811 Date: Sat Jan 5 14:52:04 2008 -0500
813 Support setting FDT properties with optional values.
815 Fix a bug found and documented by Bartlomiej Sieka where the optional
816 value on "fdt set <path> <prop> [<val>]" wasn't optional.
818 => fdt mknode / testnode
819 => fdt print /testnode
822 => fdt set /testnode testprop
823 => fdt print /testnode
830 commit 22fb2246df91bfc840d87f0c5910818bad55577a
832 Date: Fri Dec 28 11:56:30 2007 +0100
834 Add fdt_find_and_setprop() to fdt_support.h
836 fdt_find_and_setprop() is used by several 4xx boards and it's
837 missing in the appropriate header. This patch eliminates a
838 warning when building U-Boot for such boards.
843 commit 802b769bac17b0560d3535a42c502469ee190cd1
845 Date: Tue Jan 8 18:39:30 2008 +0100
847 ppc4xx: Return 0 on success in 4xx ethernet driver
851 commit 6775c68683a53c7abc778774641aac6f833a2cbf
853 Date: Tue Jan 8 09:59:49 2008 -0600
855 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
859 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
861 Date: Thu Dec 20 16:28:34 2007 -0600
863 mpc83xx: rm remaining FLAT_TREE code
865 ..in board pci.c files
869 commit b3458d2cd55d01732e30a76d898afd99e871cd67
871 Date: Thu Dec 20 15:57:28 2007 -0600
873 mpc83xx: remove FLAT_TREE code
875 need to rm it from pci code, too!
879 commit 5b8bc606c61456566af6912f818a153b6b06f242
881 Date: Thu Dec 20 14:09:22 2007 -0600
883 mpc83xx: convert to using do_fixup_*()
885 convert to using simpler mpc85xx style fdt update code; streamline by
886 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
887 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
888 converted over to using libfdt).
892 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
894 Date: Thu Dec 20 12:58:51 2007 -0500
896 sbc8349: enable libfdt by default on WRS SBC8349 board.
898 Make libfdt the default for the WRS SBC8349 board.
899 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
900 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
904 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
906 Date: Thu Dec 20 12:58:16 2007 -0500
908 sbc8349: migrate board to libfdt
910 This adds libfdt support code for the Wind River sbc8349 board.
912 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
913 the other Freescale 83xx boards.
917 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
919 Date: Thu Dec 20 12:56:19 2007 -0500
921 sbc8349: Remove board specific ECC code
923 ECC code is now shared for all 83xx boards, so remove board specific one.
924 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
928 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
930 Date: Thu Dec 20 01:30:48 2007 -0600
932 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
934 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
938 commit ccf21c311e68d48399eff1e72936052885f6e3f7
940 Date: Thu Dec 6 16:43:40 2007 +0100
942 Add support CONFIG_UEC_ETH3 in MPC83xx
946 commit e6af9932d31171e35db880e7b2f29f903b1b7660
948 Date: Mon Nov 26 11:00:54 2007 -0600
950 Remove CONFIG options related to OF that we dont use
952 The MPC8360E MDS config defined:
954 CONFIG_OF_HAS_UBOOT_ENV
956 Which we don't use or ever needed. This seems like copy-paste feature creep.
960 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
962 Date: Mon Dec 10 14:16:22 2007 -0600
964 mpc83xx: supress compiler warning
966 mpc8360emds.c: In function ‘ft_board_setup’:
967 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
968 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
972 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
974 Date: Tue Nov 27 14:17:29 2007 -0600
976 mpc83xx: fix remaining fdt_find_node_by_path references
978 rename to fdt_path_offset
982 commit 921d4b19ad1be704df58725485d9292dc0414adf
984 Date: Mon Nov 19 12:30:09 2007 -0600
986 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
988 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
989 This change guarantees that the environment will be located on the
990 first flash sector after the U-Boot image.
994 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
996 Date: Fri Nov 9 14:28:08 2007 -0600
998 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
1000 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
1001 properties in the device tree so the PHY gets configured for internal delay on
1002 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
1006 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
1008 Date: Tue Sep 18 12:41:15 2007 +0800
1010 mpc83xx: update the CREDITS and MAINTAINERS
1012 update the CREDITS and MAINTAINERS.
1016 commit b21add4b42af7b767448251b599b91066a160e0d
1018 Date: Tue Sep 18 12:40:21 2007 +0800
1020 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
1022 Add the MAINTAINER and MAKEALL entries for mpc837xemds
1026 commit f8900ce9094c462355eb792eea264ff16ac8fd16
1028 Date: Tue Sep 18 12:38:53 2007 +0800
1030 mpc83xx: Add the MPC837xEMDS board readme
1032 Add the README.mpc837xemds to /doc
1036 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
1038 Date: Tue Sep 18 12:37:57 2007 +0800
1040 mpc83xx: Add the support of MPC837xEMDS board
1042 The MPC837xEMDS board support:
1043 * DDR2 400MHz hardcoded and SPD init
1044 * Local bus NOR Flash
1045 * I2C, UART, MII and RTC
1051 commit 555da61702771fe0f76f3de23b4e7590f3704161
1053 Date: Tue Sep 18 12:36:58 2007 +0800
1055 mpc83xx: Add the support of MPC8315E SoC
1057 The MPC8315E SoC including e300c3 core and new IP blocks,
1058 such as TDM, PCI Express and SATA controller.
1062 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
1064 Date: Tue Sep 18 12:36:11 2007 +0800
1066 mpc83xx: Add the support of MPC837x SoC
1068 The MPC837x SoC including e300c4 core and new IP blocks,
1069 such as SDHC, PCI Express and SATA controller.
1073 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
1075 Date: Wed Nov 14 18:54:53 2007 +0300
1077 MPC8360E-MDS: configure and enable second UART
1079 Despite user manual, BCSR9.7 is negated (high) on HRST, so
1080 UART2 is disabled. Fix that and configure QE pins properly.
1084 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
1086 Date: Mon Nov 5 09:34:06 2007 -0600
1088 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
1090 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
1091 currently-defined 83xx boards. This change guarantees that the environment
1092 will be located on the first flash sector after the U-Boot image.
1097 commit e05329516a13616b53240cd85b739217c2bf87f1
1099 Date: Fri Jan 4 13:27:02 2008 -0500
1101 ppc4xx: Remove weak binding from common Denali data-eye search code
1103 Now that there are no board-specific versions of
1104 "denali_core_search_data_eye()", the weak binding on the common version
1109 commit 5ba576c01602fd328800a427964c36a0a05c5dce
1111 Date: Sat Jan 5 09:13:46 2008 +0100
1113 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
1117 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
1119 Date: Sat Jan 5 09:12:41 2008 +0100
1121 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
1123 On Katmai the complete auto-calibration somehow doesn't seem to
1124 produce the best results, meaning optimal values for RQFD/RFFD.
1125 This was discovered by GDA using a high bandwidth scope,
1126 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
1127 so now on Katmai "only" RFFD is auto-calibrated.
1129 This patch also adds RDCC calibration as mentioned on page 7 of
1130 the AMCC PowerPC440SP/SPe DDR2 application note:
1131 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
1135 commit 49db47b8ae6afff2b898be312948ff501357dc80
1137 Date: Wed Jan 2 16:48:42 2008 +0100
1139 ppc4xx: Remove sdram.h from PMC440 board
1143 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
1145 Date: Wed Jan 2 16:48:34 2008 +0100
1147 ppc4xx: use common denali core defines and data eye search code for PMC440
1151 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
1153 Date: Wed Jan 2 12:05:14 2008 +0100
1155 ppc4xx: More cleanup for esd's LCD code
1159 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
1161 Date: Fri Jan 4 12:00:01 2008 +0100
1163 ppc4xx: Fix Sequoia NAND booting target
1165 The Sequoia NAND booting target now uses the recently extracted
1166 cpu/ppc4xx/denali_data_eye.c file too.
1170 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
1172 Date: Thu Jan 3 15:02:02 2008 -0500
1174 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
1178 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
1180 Date: Fri Jan 4 02:11:56 2008 -0500
1182 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
1184 Note: this patch changes the configuration of some GPIO registers:
1186 Register Old Value New Value
1187 --------------- ---------- ----------
1188 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
1189 DCR GPIO0_TSRH 0x55005000 0x00000000
1190 DCR GPIO1_TCR 0xC2000000 0xE2000000
1191 DCR GPIO1_TSRL 0x0C000000 0x00200000
1192 DCR GPIO1_ISR2L 0x00050000 0x00110000
1196 commit 5ab884b254ca2e707ab50545cd705f30108cf491
1198 Date: Thu Jan 3 18:54:00 2008 -0500
1200 ppc4xx: Add functionality to GPIO support
1202 This patch makes two additions to GPIO support:
1204 First, it adds function gpio_read_in_bit() to read the a bit from the
1205 GPIO Input Register (GPIOx_IR) in the same way that function
1206 gpio_read_out_bit() reads a bit from the GPIO Output Register
1209 Second, it modifies function gpio_set_chip_configuration() to provide
1210 an additional option for configuring the GPIO from the
1211 "CFG_4xx_GPIO_TABLE".
1213 According to the 440EPx User's Manual, when an alternate output is used,
1214 the three-state control is configured in one of two ways, depending on
1215 the particular output. The first option is to select the corresponding
1216 alternate three-state control in the GPIOx_TRSH/L registers. The second
1217 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
1218 the GPIOx_TRSH/L registers, and set the corresponding bit in the
1219 GPIOx_TCR register to enable the output. For example, the Manual
1220 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
1221 the alternate three-state control (first option), and specifies
1222 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
1223 enabled in the GPIOx_TCR register (second option).
1225 Currently, gpio_set_chip_configuration() configures all alternate signal
1226 outputs to use the first option. This patch allow the second option to
1227 be selected by setting the "out_val" element in the table entry to
1228 "GPIO_OUT_1". The first option is used when the "out_val" element is
1229 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
1230 alternate signal is selected, and because all current GPIO tables set
1231 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
1232 not change any existing configurations.
1236 commit 196404cdc1de495d6182e84731c200fc5748df15
1238 Date: Sun Dec 30 01:01:54 2007 -0500
1240 PPC4xx: Remove sdram.h from board/lwmon5
1242 These definitions are now in "include/ppc440.h".
1246 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
1248 Date: Sun Dec 30 01:01:32 2007 -0500
1250 PPC4xx: Use common code for LWMON5 board SDRAM support
1252 This patch also modifies the functionality of the code so that the data-eye
1253 search is now done with with the cache disabled.
1257 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
1259 Date: Sun Dec 30 01:01:14 2007 -0500
1261 PPC4xx: Remove sdram.h from board/amcc/sequoia
1263 These definitions are now in "include/ppc440.h".
1267 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
1269 Date: Sun Dec 30 01:00:50 2007 -0500
1271 PPC4xx: Use common code for Sequoia board SDRAM support
1275 commit 8b0c5c127690335758100c25eaec2b84db97c101
1277 Date: Thu Dec 27 16:58:41 2007 +0100
1279 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
1281 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
1282 networking stack does not automatically switch to
1283 another interface. This patch does not touch the default
1289 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
1291 Date: Thu Nov 29 12:16:13 2007 +0530
1293 NET: Proper return code handling in eth_init() function in file eth.c
1295 This patch modifies the return code handling in the eth_init()
1296 function, to be compatible with the handling of the return codes in
1297 the other network stack files. It now returns a 0 on Success and -1 on
1303 commit 5ca2d0953e4579a80810966cca2077e20d912c97
1305 Date: Mon Nov 19 20:27:04 2007 +0900
1307 net/eth.c: Fix env_enetaddr signed overflow
1309 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
1312 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
1320 Warning: NEC-Candy MAC addresses don't match:
1321 Address in SROM is 00:00:4C:80:92:A2
1322 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
1324 This patch changes env_enetaddr type from `char' to `unsigned char'.
1330 commit f85b60710571b37293d2233933b76e2aa3db5635
1332 Date: Thu Dec 27 18:19:02 2007 +0100
1334 Introduce new eth_receive routine
1336 The purpose of this routine is receiving a single network frame, outside of
1337 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
1338 U-Boot will let them utilise networking facilities. For sending a raw frame
1339 the already existing eth_send() can be used.
1341 The direct consumer of this routine is the newly introduced API layer for
1342 external applications (enabled with CONFIG_API).
1348 commit 5c740711f0ea5b51414b341b71597c4a0751be74
1350 Date: Thu Jan 3 10:41:04 2008 -0600
1352 8610: Move include of config.h earlier.
1354 Include config.h earlier in the set of #includes
1355 so as to avoid a incidental and duplicate definition
1356 of CFG_CACHELINE_SIZE.
1358 Signed-off-by: Jon Loeliger
1360 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
1362 Date: Tue Dec 4 10:53:34 2007 -0600
1364 Don't slam #undef DEBUG in the 8641HPCN config file.
1366 Doing so prevents it from being individually set
1367 and useful in other files.
1371 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
1373 Date: Wed Nov 28 14:47:18 2007 -0600
1375 Convert MPC8641HPCN to use libfdt.
1377 Assumes the presence of the aliases node in the DTS to
1378 locate the ethernet, pci and serial nodes for fixups.
1380 Use consistent fdtaddr and fdtfile in environment variables.
1384 commit ce37422d0002e10490e268392e0c4e3028e52cec
1386 Date: Wed Jan 2 14:06:26 2008 +0100
1388 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
1390 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
1391 flash chips connected to a 32bit wide port.
1395 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
1397 Date: Wed Jan 2 15:58:44 2008 +0100
1399 Fix compile problem introduced by "cleanup" commit 3dfd708c
1403 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
1405 Date: Wed Jan 2 15:54:45 2008 +0100
1407 Make scripts and Makefiles POSIX compliant
1409 The bash builtin versions of the "test" (resp. "[") command allow
1410 using "==" for string comparisons, but POSIX compatible implemen-
1411 tations (like /usr/bin/test) insist on using "=" only. On such systems
1414 $ /usr/bin/test a == a && echo OK
1415 /usr/bin/test: ==: binary operator expected
1417 This patch fixes Makefiles and scripts to use POSIX style.
1421 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
1423 Date: Wed Jan 2 12:38:43 2008 +0100
1425 Minor coding style cleanup.
1429 commit e174ac34adf5d5653df12bc3cf19c52063a71269
1431 Date: Fri Dec 28 17:29:56 2007 +0100
1433 ppc4xx: Coding style cleanup
1437 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
1439 Date: Fri Dec 28 17:07:24 2007 +0100
1441 ppc4xx: Complete PMC440 board support
1443 This patch brings the PMC440 board configuration file.
1444 Finally it enables the PMC440 board support.
1448 commit 407843a582560fc5231299561ab3c2b6b6cd3397
1450 Date: Fri Dec 28 17:07:18 2007 +0100
1452 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
1454 This patch adds some BSP commands and FPGA booting support
1455 for esd's PMC440 boards.
1459 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
1461 Date: Fri Dec 28 17:07:14 2007 +0100
1463 ppc4xx: Add initial esd PMC440 board files
1465 This patch adds the first files for the new esd PMC440 boards.
1466 The next two patches will complete the PMC440 board support.
1470 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
1472 Date: Fri Dec 28 17:10:36 2007 +0100
1474 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
1476 - add EEPROM write protection for esd PLU405 boards.
1477 - initialize NAND GPIOs
1478 - use correct io accessors
1483 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
1485 Date: Fri Dec 28 17:10:44 2007 +0100
1487 ppc4xx: use correct io accessors for esd's LCD code
1489 This patch fixes esd's LCD dectection code to work correctly with
1494 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
1496 Date: Fri Dec 28 17:10:42 2007 +0100
1498 ppc4xx: Maintenance patch for VOH405 boards
1500 - add EEPROM write protection
1501 - initialize NAND GPIOs
1502 - use correct io accessors
1503 - slow down I2C clock to 100kHz
1504 - enable ext. I2C bus
1509 commit c05569066dbcba3fdf36d4d1943df265dc316a86
1511 Date: Fri Dec 28 16:08:08 2007 +0100
1513 ppc4xx: Enable 405EP PCI arbiter per default on all boards
1515 In an attmemt to clean up the 4xx start.S file, I removed the enabling
1516 of the internal 405EP PCI arbiter. This is needed for multiple other
1517 405EP platforms, like most of the esd 405EP. Now the internal PCI
1518 arbiter is enabled again per default as it has been before.
1523 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
1525 Date: Fri Dec 28 15:53:46 2007 +0100
1527 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
1532 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
1534 Date: Fri Dec 28 06:06:04 2007 +0100
1536 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
1538 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
1539 platforms mentioned above.
1543 commit b568fd25574181a3b12ae3d66b2913903442cb83
1545 Date: Thu Dec 27 17:03:46 2007 +0100
1547 Remove CPCI440 board
1549 This board never left prototyping state and it
1550 became a millstone round my neck. So remove it.
1554 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
1556 Date: Thu Dec 27 11:28:51 2007 -0500
1558 Add support for Korat PPC440EPx board
1560 These patches add support for the PPC440EPx-based "Korat" board to
1561 U-Boot. They are based primarily on support for the Sequoia board.
1565 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
1567 Date: Sat Dec 22 15:16:25 2007 -0500
1569 Add configuration file for Korat board
1571 This patch supplies the configuration file for the Korat PPC440EPx-
1576 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
1578 Date: Sat Dec 22 15:16:11 2007 -0500
1580 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
1584 commit aba19604d848b2838cfb9ebe818909e6a216058e
1586 Date: Thu Dec 27 10:54:48 2007 -0500
1588 Add 440EPx DDR2 SPD DIMM support
1590 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
1591 controller. It should also work on the 440GRx. It is based on the DDR2
1592 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
1594 This code has been tested on prototype Korat boards with three Kingston
1595 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
1596 (two ranks). The Korat board has a single DIMM socket, but support has
1597 been provided (though not tested) for boards with two DIMM sockets.
1601 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
1603 Date: Sat Dec 22 15:15:30 2007 -0500
1605 Copy 440EPx/GRx SDRAM data-eye search to common directory
1607 This patch creates a non-board-specific file for performing the SDRAM
1608 data-eye search. It also adds ECC error checking to the test of valid
1609 data on readback when ECC is enabled.
1613 commit c46f53333b22b1f9098676bea8884fc7db820cf3
1615 Date: Sat Dec 22 15:15:13 2007 -0500
1617 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
1619 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
1620 It also fixes two typos in the definitions, so the board-specific
1621 "sdram.h" files containing these definitions are also fixed to avoid
1626 commit c348578bf612d0c56d8d376d23cae16defbd86af
1628 Date: Thu Dec 27 10:50:55 2007 -0500
1630 Add Ethernet 1000BASE-X support for PPC4xx
1632 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
1633 is defined, the PHY will advertise it's capabilities for autonegotiation
1634 based on the capabilities shown in the PHY's status registers, including
1635 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
1636 advertise hard-coded capabilities, as before.
1640 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
1642 Date: Thu Dec 27 09:52:17 2007 -0500
1644 Add driver for National Semiconductor LM73 temperature sensor
1646 This driver is based on the driver for the LM75.
1650 commit 12618278688ea9b3d76536960a5ad2e3790fac40
1652 Date: Sat Dec 22 15:14:00 2007 -0500
1654 Add driver for STMicroelectronics M41T60 RTC
1656 This driver is based on the driver for the M41T11. In the intended
1657 application, the RTC will be powered by a large capacitor, rather than a
1658 battery. The driver therefore checks to see whether the RTC has lost
1659 power. The chip's OUT bit is normally reset from its power-up state. If
1660 the OUT bit is read as set, or if the date and time are not valid, then the
1661 RTC is assumed to have lost power, and its date and time are reset to
1662 1900-01-01 00:00:00.
1664 Support for adjusting the speed of the clock to improve accuracy is
1665 provided through an environment variable.
1669 commit d3471173e14b7544bb60339eda8d3d3906694b0a
1671 Date: Sat Dec 22 15:34:39 2007 -0500
1673 Use out_be32() and friends to access memory-mapped registers in sequoia.c
1677 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
1679 Date: Sat Dec 22 15:34:20 2007 -0500
1681 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
1685 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
1687 Date: Sat Dec 22 15:23:50 2007 -0500
1689 Cosmetic changes to ECC POST for AMCC Denali core
1693 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
1695 Date: Wed Dec 26 20:20:19 2007 +0100
1697 ppc4xx: Fix compilation problem in 405 cache POST test
1701 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
1703 Date: Sat Dec 22 12:20:09 2007 +0100
1705 ppc4xx: Move virtual address of POST cache test to bigger address
1707 On Sequoia & LWMON5 the virtual address of the POST cache test is now
1708 moved to a bigger address. This enables usage of more memory on those
1713 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
1715 Date: Sat Dec 22 12:18:26 2007 +0100
1717 ppc4xx: Fix problem in 44x cache POST routine
1719 As repoted by Larry Johnson, running "diag run cache" caused a crash
1720 in U-Boot. This problem was introduced by a patch that removed the
1721 TLB entry for the cache test after the test has completed. Since this
1722 TLB was only setup once, a 2nd attempt to run this cache test
1723 failed with a crash. Now this TLB entry is created every time the
1728 commit b0265b576bb8fa9465f99e99c323768b562fadc2
1730 Date: Fri Dec 21 07:51:29 2007 +0100
1732 ppc4xx: Update Makalu fdt support
1736 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
1738 Date: Wed Dec 19 09:05:40 2007 +0100
1740 ppc4xx: Add fdt support to AMCC Katmai eval board
1744 commit 328a340392a5df9aaf00792be989df73e750859e
1746 Date: Tue Dec 18 08:44:51 2007 +0100
1748 ppc4xx: fdt: Cleanup setup of cpu node setup
1750 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
1751 without using the absolute path to the cpu node. This makes it possible
1752 to use this U-Boot version with both versions of cpu-node naming
1753 "cpu@0" and the former "PowerPC,440EPx@0".
1757 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
1759 Date: Mon Dec 17 17:26:21 2007 +0100
1761 ppc4xx: Fix lwmon5 compilation problem
1763 Now that the 440EPx ECC test is not board specific anymore
1764 remove this Makefile.
1768 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
1770 Date: Wed Dec 5 17:43:20 2007 +0100
1772 Fix ppc4xx clear_bss() code
1774 ppc4xx clear_bss() fails if BSS segment size is not
1775 divisible by 4 without remainder. This patch provides
1776 fix for this problem.
1780 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
1782 Date: Fri Nov 30 18:35:11 2007 +0100
1784 PPC4xx: Minimal changes to add vxWorks support
1788 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
1790 Date: Fri Nov 23 13:09:18 2007 +0100
1792 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
1794 When using dhcp/bootp the "netmask" environment variable is not
1795 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
1796 desireable, so the following patch adds this this option to the board
1802 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
1804 Date: Sat Oct 27 12:48:15 2007 -0400
1806 Fix/enhance ECC POST for 440EPx/GRx
1808 This patch allows the ECC POST to be used for different boards with the
1809 PPC440 Denali SDRAM controller. Modifications include skipping the test
1810 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
1811 to prevent timing errors.
1815 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
1817 Date: Sat Oct 27 12:48:05 2007 -0400
1819 PPC4xx: Move/rename ECC POST for 440EPx/GRx
1823 commit c29d2d3680046d430022c55e50fcb27f5866517e
1825 Date: Fri Dec 14 11:20:33 2007 +0100
1827 ppc4xx: use correct io accessors for 4xx ethernet POST
1831 commit ba79fde58a48c0a6ff8e2a96caba951594142203
1833 Date: Fri Dec 14 11:19:56 2007 +0100
1835 ppc4xx: fix flush + invalidate_dcache_range arguments
1837 flush + invalidate_dcache_range() expect the start and stop+1 address.
1838 So the stop address is the first address behind (!) the range.
1842 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
1844 Date: Fri Dec 14 08:41:29 2007 +0100
1846 ppc4xx: fdt: use fdt_fixup_ethernet()
1848 By using aliases in the dts file, the ethernet node fixup is
1849 much easier with the recently added functions.
1851 Please note that the dts file needs the aliases for this to work.
1855 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
1857 Date: Thu Dec 13 14:52:53 2007 +0100
1859 ppc4xx: Bring 4xx fdt support up-to-date
1861 This patch update the 4xx fdt support. It enabled fdt booting
1862 on the AMCC Kilauea and Sequoia for now. More can follow later
1867 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
1869 Date: Thu Dec 27 07:50:54 2007 +0100
1871 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
1873 The check for an sufficiently erased destination was missing in the
1874 buffered write function of the cfi flash driver (when
1875 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
1876 writing to such a region will fail with the currect error message.
1880 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
1882 Date: Mon Nov 12 10:56:17 2007 +0100
1884 Some configuration updates for the TQM5200 based TB5200 board:
1886 - enable command line history
1887 - increase malloc space (because of bigger flash sectors)
1891 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
1893 Date: Thu Sep 27 11:10:08 2007 +0200
1895 TQM8xx: use the CFI flash driver on all TQM8xx boards
1899 commit 11d9eec479b470eab9242ab937fca70a876d9376
1901 Date: Wed Sep 26 17:55:56 2007 +0200
1903 TQM885D: adjust for doubled flash sector size + some minor fixes
1907 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
1909 Date: Wed Sep 26 17:55:54 2007 +0200
1911 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
1913 CAS-Latency=2, Write Recovery Time tWR=2
1914 The max. supported bus frequency is 66 MHz. Therefore, changed
1915 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
1919 commit b988b8cd443989be65161888eea0127ad03f846f
1921 Date: Wed Sep 26 17:55:56 2007 +0200
1923 TQM885D: use calculated cpuclk instead of measuring it
1925 On the TQM885D the measurement of cpuclk with the PIT reference
1926 timer ist not necessary. Since all module variants use the same
1927 external 10 MHz oscillator, the cpuclk only depends on the PLL
1928 configuration - which is readable by software.
1932 commit 492c7049869348d31168de8dad89651315e468e0
1934 Date: Thu Sep 27 14:54:46 2007 +0200
1936 TQM885D: fix SDRAM refresh
1938 At 133 MHz the current SDRAM refresh rate is too fast
1939 (measured 4 * 1.17 us).
1940 CFG_MAMR_PTA changes from 39 to 128. This result
1941 in a refresh rate of 4 * 7.8 us at the default clock
1942 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
1943 This is a compromise until a new method is found to
1944 adjust the refresh rate.
1948 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
1950 Date: Thu Sep 27 14:54:46 2007 +0200
1952 TQM860M: Support for 10col SDRAMs, max. 128 MiB
1956 commit 61fb15c516fef5631e305f1976d7b3a679725856
1958 Date: Thu Dec 27 01:52:50 2007 +0100
1960 Fix coding style issues; update CHANGELOG.
1964 commit 467bcee11fe26ad422f2de971aa70866079870f2
1966 Date: Fri Dec 14 15:36:18 2007 +0100
1968 cfi_flash: Add manufacturer-specific fixups
1970 Run fixups based on the JEDEC manufacturer ID independent of the
1973 This changes current behaviour: Previously, geometry reversal for AMD
1974 chips were done based on the command set ID, while they are now done
1975 based on the JEDEC manufacturer and device ID.
1977 Also add fixup for top-boot Atmel chips. A fixup is needed for
1978 AT49BV6416(T) too, but since u-boot currently only reads the low byte
1979 of the device ID, there's no way to tell it apart from AT49BV642D,
1980 which should not have this fixup. Since AT49BV642D support is
1981 necessary to get ATNGW100 board support into mainline, I've commented
1982 out the fixup for now.
1986 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
1988 Date: Fri Dec 14 15:36:17 2007 +0100
1990 cfi_flash: Add cmdset-specific init functions
1992 Move things like reading JEDEC IDs and fixing up geometry reversal
1993 into separate functions. The geometry reversal fixup is now performed
1994 by altering the qry structure directly, which makes the sector init
1995 code slightly cleaner.
1999 commit e23741f4a6d8047520ef0d4971762749b3587d32
2001 Date: Fri Dec 14 15:36:16 2007 +0100
2003 cfi_flash: Read whole QRY structure in one go
2005 Read out the whole CFI Standard Query structure after successful cfi
2006 identification. This allows subsequent code to access this information
2007 directly without having to go through flash_read_uchar() and friends.
2011 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
2013 Date: Mon Dec 17 11:02:44 2007 +0100
2015 AVR32: Fix logic inversion in disable_interrupts()
2017 disable_interrupts() should return nonzero if interrupts were
2018 _enabled_ before, not disabled.
2022 commit acac475212cbedb17b321a363a1c878e2b47b37f
2024 Date: Fri Dec 14 16:51:22 2007 +0100
2026 AVR32: Enable interrupts at bootup
2028 The timer code depends on the timer interrupt to keep track of the
2029 upper 32 bits of the cycle counter. This obviously doesn't work when
2030 interrupts are disabled the whole time.
2034 commit 9570bcd87f4db255514f43b6701746c412f8fef0
2036 Date: Thu Nov 15 10:03:45 2007 +0100
2038 AVR32: Fix wrong pin setup for USART3
2040 As reported by Gerhard Berghofer:
2042 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
2043 instead of PB18 and PB19.
2045 which is obviously correct. There's currently no code that uses
2046 USART3, but custom boards may run into problems.
2050 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
2052 Date: Thu Nov 1 12:44:20 2007 +0100
2054 README: Remove ATSTK1000 daughterboard list
2056 As noted by Kim Phillips, these lists tend to become out of date.
2060 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
2062 Date: Tue Oct 30 14:56:36 2007 +0100
2064 Add ATSTK100[234] to MAINTAINERS
2066 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
2067 "mother". Also update the entry for ATSTK1000 to be not only about the
2068 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
2072 commit 64ff2357b1727213803591813dbc779c924bf772
2074 Date: Mon Oct 29 13:02:54 2007 +0100
2076 AVR32: Add support for the ATSTK1004 board
2078 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
2079 which is a derivative of AT32AP7000.
2083 commit 667568db157f374b85abd7e03596ddd1f0b25681
2085 Date: Mon Oct 29 13:02:54 2007 +0100
2087 AVR32: Add support for the ATSTK1003 board
2089 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
2090 which is a derivative of AT32AP7000.
2094 commit 5fee84a794a51ec830548cda485a770efb018b92
2096 Date: Mon Oct 29 13:23:33 2007 +0100
2098 AVR32: Make some AT32AP700x peripherals optional
2100 Add a chip-features file providing definitions of the form
2102 AT32AP700x_CHIP_HAS_<peripheral>
2104 to indicate the availability of the given peripheral on the currently
2109 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
2111 Date: Mon Oct 29 13:09:56 2007 +0100
2113 AVR32: Rename at32ap7000 -> at32ap700x
2115 The SoC-specific code for all the AT32AP700x CPUs is practically
2116 identical; the only difference is that some chips have less features
2117 than others. By doing this rename, we can add support for the AP7000
2118 derivatives simply by making some features conditional.
2122 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
2124 Date: Fri Jun 29 18:22:34 2007 +0200
2126 atmel_mci: Show SR when block read fails
2128 Show controller status as well as card status when an error occurs
2133 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
2135 Date: Thu Dec 13 14:52:53 2007 +0100
2137 ppc4xx: Bring 4xx fdt support up-to-date
2139 This patch update the 4xx fdt support. It enabled fdt booting
2140 on the AMCC Kilauea and Sequoia for now. More can follow later
2145 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
2147 Date: Thu Dec 13 12:56:34 2007 +0100
2149 cfi_flash: Use map_physmem() and unmap_physmem()
2151 Use map_physmem() and unmap_physmem() to convert from physical to
2152 virtual addresses. This gives the arch a chance to provide an uncached
2153 mapping for flash accesses.
2157 commit 4d7d6936eb29af7cca330937808312aa5f61454d
2159 Date: Thu Dec 13 12:56:33 2007 +0100
2161 Introduce map_physmem() and unmap_physmem()
2163 map_physmem() returns a virtual address which can be used to access a
2164 given physical address without involving the cache. unmap_physmem()
2165 should be called when the virtual address returned by map_physmem() is
2168 This patch adds a stub implementation which simply returns the
2169 physical address cast to a uchar * for all architectures except AVR32,
2170 which converts the physical address to an uncached virtual mapping.
2171 unmap_physmem() is a no-op on all architectures, but if any
2172 architecture needs to do such mappings through the TLB, this is the
2173 hook where those TLB entries can be invalidated.
2177 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
2179 Date: Thu Dec 13 12:56:32 2007 +0100
2181 cfi_flash: Introduce read and write accessors
2183 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
2184 them to access the flash memory. This makes it clearer when the flash
2185 is actually being accessed; merely dereferencing a volatile pointer
2186 looks just like any other kind of access.
2190 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
2192 Date: Thu Dec 13 12:56:31 2007 +0100
2194 Implement __raw_{read,write}[bwl] on all architectures
2196 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
2197 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
2202 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
2204 Date: Sat Oct 6 18:55:36 2007 +0200
2206 cfi_flash: Reorder functions and eliminate extra prototypes
2208 Reorder the functions in cfi_flash.c so that each function only uses
2209 functions that have been defined before it. This allows the static
2210 prototype declarations near the top to be eliminated and might allow
2211 gcc to do a better job inlining functions.
2215 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
2217 Date: Thu Dec 13 12:56:29 2007 +0100
2219 cfi_flash: Make some needlessly global functions static
2221 Make functions not declared in any header file static.
2225 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
2227 Date: Thu Dec 13 12:56:28 2007 +0100
2229 cfi_flash: Break long lines
2231 This patch tries to keep all lines in the cfi_flash driver below 80
2232 columns. There are a few lines left which don't fit this requirement
2233 because I couldn't find any trivial way to break them (i.e. it would
2234 take some restructuring, which I intend to do in a later patch.)
2238 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
2240 Date: Tue Dec 11 13:59:57 2007 +0100
2242 CFI: synchronize command offsets with Linux CFI driver
2244 Fixes non-working CFI Flash on the Inka4x0 board.
2248 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
2250 Date: Fri Dec 7 12:17:34 2007 -0600
2252 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
2254 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
2255 (MPC8544DS, MPC8548CDS, MPC8568MDS).
2259 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
2261 Date: Fri Dec 7 12:04:30 2007 -0600
2263 Update Freescale MPC85xx ADS/CDS/MDS board config
2265 * Enabled CONFIG_CMD_ELF
2269 commit d435793229ce29a42797c1edc39f5b34f987f91a
2271 Date: Fri Dec 7 04:59:26 2007 -0600
2273 Handle Asynchronous DDR clock on 85xx
2275 The MPC8572 introduces the concept of an asynchronous DDR clock with
2276 regards to the platform clock.
2278 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
2283 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
2285 Date: Thu Nov 29 10:34:28 2007 -0600
2287 Update Freescale MPC85xx ADS/CDS/MDS board config
2289 * Removed some misc environment setup
2290 * Enabled CONFIG_CMDLINE_EDITING
2294 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
2296 Date: Thu Nov 29 10:47:44 2007 -0600
2298 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
2300 Minor path corrections needed to ensure buildability.
2304 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
2306 Date: Thu Nov 29 10:16:18 2007 -0600
2308 Move the MPC8540 ADS board under board/freescale.
2310 Minor path corrections needed to ensure buildability.
2314 commit 870ceac5b3a3486c109396e005af81ae762b5710
2316 Date: Thu Nov 29 10:14:50 2007 -0600
2318 Move the MPC8560 ADS board under board/freescale.
2320 Minor path corrections needed to ensure buildability.
2324 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
2326 Date: Thu Nov 29 10:13:47 2007 -0600
2328 Move the MPC8568 MDS board under board/freescale.
2330 Minor path corrections needed to ensure buildability.
2334 commit a853d56c59b33415304531443633808736acfc6e
2336 Date: Thu Nov 29 02:18:59 2007 -0600
2338 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
2340 We already had defines for LAWAR_TRGT_IF_* that we should use
2341 rather than creating new ones. Also, added some missing defines for
2346 commit 04db400892da37b76a585e332a0c137954ad2015
2348 Date: Thu Nov 29 02:10:09 2007 -0600
2350 Stop using immap_t on 85xx
2352 In the future the offsets to various blocks may not be in same location.
2353 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
2354 instead of getting it via &immap.
2358 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
2360 Date: Thu Nov 29 01:23:09 2007 -0600
2362 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
2366 commit c480861bf000156e6a3e932c258db59ff2212dd3
2368 Date: Thu Nov 29 01:06:19 2007 -0600
2370 Update MPC8568 MDS to use libfdt
2372 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
2373 ethernet, pci, and serial for the various fixups that are done.
2377 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
2379 Date: Wed Nov 14 15:52:06 2007 -0500
2381 Add PCI Express support on MPC8568MDS
2386 commit b90d25497625b90ffa3f2911a0895ca237556ff5
2388 Date: Thu Nov 29 00:11:44 2007 -0600
2390 Update MPC85xx CDS to use libfdt
2392 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
2393 ethernet, pci, and serial for the various fixups that are done.
2397 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
2399 Date: Wed Nov 28 22:54:27 2007 -0600
2401 Update MPC8540 ADS to use libfdt
2403 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
2404 ethernet, pci, and serial for the various fixups that are done.
2408 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
2410 Date: Wed Nov 28 22:40:31 2007 -0600
2412 Update MPC8560 ADS to use libfdt
2414 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
2415 ethernet, pci, and serial for the various fixups that are done.
2419 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
2421 Date: Wed Nov 28 00:36:33 2007 -0600
2423 Stop using immap_t for cpm offset on 85xx
2425 In the future the offsets to various blocks may not be in same location.
2426 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
2427 instead of getting it via &immap->im_cpm.
2431 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
2433 Date: Tue Nov 27 23:25:02 2007 -0600
2435 Stop using immap_t for guts offset on 85xx
2437 In the future the offsets to various blocks may not be in same location.
2438 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
2439 instead of getting it via &immap->im_gur.
2443 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
2445 Date: Tue Nov 27 22:42:34 2007 -0600
2447 Update MPC8544 DS config
2449 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
2450 * Removed some misc environment setup
2451 * Moved to using fdtfile & fdtaddr as fdt env var names
2452 * Enabled CONFIG_CMDLINE_EDITING
2456 commit addce57e2e4c49e77ffb2020a84690713bb18b47
2458 Date: Mon Nov 26 17:12:24 2007 -0600
2460 Update MPC8544DS to use libfdt
2462 Updated the MPC8544DS config to use libfdt and assume use of aliases for
2463 ethernet, pci, and serial for the various fixups that are done.
2467 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
2469 Date: Thu Nov 29 00:15:30 2007 -0600
2471 Add libfdt based ft_cpu_setup for mpc85xx
2475 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
2477 Date: Tue Dec 11 13:38:19 2007 +0100
2479 ppc4xx: Correct GPIO offset in gpio_config()
2481 Thanks to Gary Jennejohn for pointing this out.
2485 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
2487 Date: Tue Dec 11 11:46:01 2007 +0100
2489 rtc: Fix merging problem
2493 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
2495 Date: Sat Dec 8 14:47:34 2007 +0100
2497 ppc4xx: 405EX: Correctly enable USB pins
2499 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
2500 function control) registers. This is done for the AMCC Kilauea and
2505 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
2507 Date: Sat Dec 8 08:25:09 2007 +0100
2509 CFI: Coding style cleanup
2513 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
2515 Date: Fri Dec 7 23:35:02 2007 +0100
2517 CFI: support JEDEC flash roms in CFI-flash framework
2519 The following patch adds support for non-CFI flash ROMS, by hooking into the
2520 CFI flash code and using most of its code, as recently discussed here in the
2521 thread "Mixing CFI and non-CFI flashs".
2526 commit c01b17dd856fa120b2970f50d9598546a4927ec3
2528 Date: Wed Nov 28 21:24:50 2007 -0500
2530 Conditionally compile fdt_fixup_ethernet()
2532 Fix compiler warnings: On boards that don't have ethernets defined,
2533 don't compile fdt_fixup_ethernet().
2535 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
2537 Date: Tue Nov 27 21:59:46 2007 -0600
2539 Convert boards that set memory node to use fdt_fixup_memory()
2543 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
2545 Date: Mon Nov 26 17:06:15 2007 -0600
2547 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
2549 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
2550 determine which serial alias we should set linux,stdout-path to.
2554 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
2556 Date: Mon Nov 26 14:57:45 2007 -0600
2558 Add common memory fixup function
2560 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
2564 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
2566 Date: Mon Nov 26 11:19:12 2007 -0600
2568 Conditionally compile fdt_support.c
2570 Modify common/Makefile to conditionally compile fdt_support.c based
2571 on CONFIG_OF_LIBFDT.
2575 commit d88e7ba0980773479e1a64badb293116071b7ef0
2577 Date: Mon Nov 26 10:41:40 2007 -0600
2579 Fix build breakage due to libfdt import
2581 The IDS8247 got lost in the update and need an API update
2582 do to rename of functions in libfdt.
2586 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
2588 Date: Fri Nov 23 19:43:20 2007 -0500
2590 Add spaces around the = in the fdt print format.
2594 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
2596 Date: Fri Dec 7 01:25:38 2007 +0900
2598 sh: Moved driver of the SuperH dependence
2600 The composition of the directory in the drivers/ changed.
2601 I moved SuperH serial driver and marubun PCMCIA driver.
2605 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
2607 Date: Thu Dec 6 10:21:19 2007 +0100
2613 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
2615 Date: Thu Dec 6 10:21:03 2007 +0100
2617 ADS5121 Board: fix compile problem.
2621 commit a27044b14a9e93678a82d7b35f202b93e7687abc
2623 Date: Thu Dec 6 05:58:43 2007 +0100
2625 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
2627 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
2628 setting the FIXD bit in the SDR0_MFR register. Here a description of the
2632 ------------------------------
2633 If a DMA is performed between memory and PCI with the DMA 1 Controller
2634 using prefetch, and as a result uses a special purpose buffer selected by
2635 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
2636 the first part of the transfer sequence is performed twice. The
2637 PPC440SPe PCI Controller requests more data than was needed such that in
2638 the case of enforce memory protection, a host CPU exception can occur.
2639 No data is corrupted, because data transfer is stopped in the PCI
2640 Controller. Prefetch enable is specified by setting DMA Configuration
2641 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
2643 Behavior that may be observed in a running system
2644 ---------------------------------------------------------------------------
2646 1. DMA performance is decreased because of the double access on the PCI bus
2648 2. If an illegal access to some address on the PCI bus is detected at the
2649 system level, a machine check or similar system error may occur.
2651 Workarounds Available
2652 ----------------------------------
2654 1. Do not program prefetch. Note that a prefetch command cannot be programmed
2655 without selecting a special purpose buffer.
2656 2. To avoid crossing a physical boundary of the PCI slave device, add 512
2657 bytes of address to the PCI address range.
2660 from AMCC and slighly changed.
2665 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
2667 Date: Tue Dec 4 16:29:48 2007 +0100
2669 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
2673 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
2675 Date: Mon Dec 3 00:15:28 2007 +0100
2677 Prepare for 1.3.1-rc1
2681 commit e15e33433e7c05111968dc9b434a52fd42cbd221
2683 Date: Fri Nov 30 07:15:41 2007 +0100
2685 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
2687 This manual PCIe reset triggering solves the problem seen with the
2688 Intel EPRO/1000 card, which was not detected (link not established)
2689 upon power-up reset.
2693 commit 260eea5676ca46903a335686cc020b29c4ca46fe
2695 Date: Thu Nov 29 01:21:54 2007 +0900
2697 sh: Add SuperH boards maintainer to MAINTAINERS file
2699 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
2703 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
2705 Date: Thu Nov 29 00:13:04 2007 +0900
2707 sh: Add ms7750se support in MAKEALL
2711 commit c7144373427a178332bf9754131c8c34c52c200a
2713 Date: Tue Nov 27 09:44:53 2007 +0100
2715 sh: Add sh3 and sh4 support in MAKEALL
2720 commit 130080874a3d28450098481a262c5f7c855e908d
2722 Date: Sun Nov 25 02:51:17 2007 +0900
2724 sh: Add document for SuperH.
2726 This document is a summary of information concerning SuperH of U-Boot.
2730 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
2732 Date: Sun Nov 25 02:39:31 2007 +0900
2734 sh: Add marubun's pcmcia driver
2736 Marubun pcmcia is a chip for PCMCIA used with SuperH.
2737 Of course, this can be used even by other architectures.
2738 When use this driver, came to be able to use CompactFlash
2743 commit febd86b969b975289ed948f1ac0eb9722da41ced
2745 Date: Sun Nov 25 02:32:13 2007 +0900
2747 sh: Update SuperH SCIF driver
2749 - Changed volatile unsigned to vu_.
2750 - Changed Makefile for kconfig.
2754 commit 8be760903645af09871be50ad0a6f9ebb62b311d
2756 Date: Tue Nov 27 11:57:35 2007 +0100
2758 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
2760 After an error in the AMCC 405EX users manual now correctly configure
2761 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
2766 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
2768 Date: Mon Nov 26 19:18:21 2007 +0100
2770 Cleanup coding style; update CHANGELOG
2774 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
2776 Date: Sun Nov 25 22:39:25 2007 +0100
2778 MAKEALL: add missing 512x boards in ppc
2782 commit a340c325e668ca7386c2276387681720be9c3757
2784 Date: Sun Nov 25 18:45:47 2007 +0100
2786 Makefile : fix tags ctags etags with new drivers organization
2790 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
2792 Date: Mon Nov 26 15:06:14 2007 +0100
2794 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
2796 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
2801 commit ca1ce226287270bb01e25b8e3674c701f12edf19
2803 Date: Mon Nov 26 15:01:45 2007 +0100
2805 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
2809 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
2811 Date: Sun Nov 25 18:45:47 2007 +0100
2813 Makefile : fix tags ctags etags with new drivers organization
2817 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
2819 Date: Sat Nov 24 21:26:56 2007 +0100
2821 drivers/mtd : move mtd drivers to drivers/mtd
2825 commit 318c0b90431f2648552e5ade78833f42652ce859
2827 Date: Sat Nov 24 21:17:55 2007 +0100
2829 drivers/misc : move misc drivers to drivers/misc
2833 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
2835 Date: Sat Nov 24 21:13:59 2007 +0100
2837 drivers/block : move block drivers to drivers/block
2841 commit 0c698dcaa70275eb8814f665b545547cee013892
2843 Date: Sat Nov 24 20:59:50 2007 +0100
2845 drivers/rtc : move rtc drivers to drivers/rtc
2849 commit f868cc5a50757d94f36c312395481cb0f187d9e6
2851 Date: Sat Nov 24 20:14:44 2007 +0100
2853 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
2857 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
2859 Date: Sat Nov 24 19:46:45 2007 +0100
2861 drivers/input : move input drivers to drivers/input
2865 commit e4558666293364fc3af1c1d9381ca933fa0f1275
2867 Date: Sat Nov 24 19:40:11 2007 +0100
2869 drivers/usb : move usb drivers to drivers/usb
2873 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
2875 Date: Sat Nov 24 19:33:38 2007 +0100
2877 drivers/serial : move serial drivers to drivers/serial
2881 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
2883 Date: Wed Nov 21 21:19:24 2007 +0100
2885 drivers/net : move net drivers to drivers/net
2889 commit 352d259130b349fe9593b8dada641bd78a9659e5
2891 Date: Tue Nov 20 20:41:48 2007 +0100
2893 drivers/video : move video drivers to drivers/video
2897 commit 73646217186aa17afc8e305c5f06f06dd335eaad
2899 Date: Tue Nov 20 20:33:09 2007 +0100
2901 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
2905 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
2907 Date: Tue Nov 20 20:28:09 2007 +0100
2909 drivers/pci : move pci drivers to drivers/pci
2913 commit 9162352817579840d7802da6d85872b3ca003c97
2915 Date: Thu Nov 22 17:23:23 2007 -0500
2917 Fix fdt printing for updated libfdt
2919 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
2923 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
2925 Date: Wed Nov 21 13:30:15 2007 -0600
2927 Add additional fdt fixup helper functions
2929 Added the following fdt fixup helpers:
2930 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
2931 * do_fixup_by_compat{_u32} - Find matching nodes by compat
2933 The _u32 variants work the same only the property they are setting
2934 is know to be a 32-bit integer instead of a byte buffer.
2938 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
2940 Date: Wed Nov 21 11:11:03 2007 -0600
2942 Add fdt_fixup_ethernet helper to set mac addresses
2944 Added a fixup helper that uses aliases to set mac addresses
2945 in the device tree based on the bd_t
2949 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
2951 Date: Wed Nov 21 14:07:46 2007 -0600
2953 Fix warnings from import of libfdt
2955 cmd_fdt.c: In function fdt_print:
2956 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
2957 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
2958 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
2959 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
2963 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
2965 Date: Wed Oct 24 11:04:22 2007 -0500
2967 Update libfdt from device tree compiler (dtc)
2969 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
2970 the device tree compiler (dtc) project.
2974 commit e93becf80d732b64aef81b23e8b6ece02c40533d
2976 Date: Sat Nov 3 19:46:28 2007 -0500
2978 Move do_fixup* for libfdt into common code
2980 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
2981 into common/fdt_support.c and renamed:
2983 do_fixup() -> do_fixup_by_path()
2984 do_fixup_u32() -> do_fixup_by_path_u32()
2988 commit f738b4a75998f42a7408defadc9baac7a31c92db
2990 Date: Thu Oct 25 16:15:07 2007 -0500
2992 Make no options to fdt print default to '/'
2996 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
2998 Date: Wed Oct 24 10:21:57 2007 -0500
3000 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
3003 fdt_node_is_compatible
3004 fdt_find_node_by_type
3005 fdt_find_compatible_node
3007 To ease merge of newer libfdt as we aren't using them anywhere at this time.
3009 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
3014 commit 98e2867cc85409b919f862e6c16026461ec955df
3016 Date: Wed Nov 21 09:19:37 2007 -0700
3018 [BUILD] Remove libraries when updating autoconf.mk
3020 Fix library problems caused by conditional compilation. Using
3021 autoconf.mk to decide which files to compile has caused a problem when
3022 changing configuration from one board to another without clearing out
3023 the library (*.a) files.
3025 It used to be that the linker was always passed the same list of .o
3026 files when building the .a files. However, that is not longer true
3027 with conditional compilation. Now, a different board config will have
3028 a different file list passed to the linker. The problem occurs when
3029 a library has already been built and the board config is changed.
3031 Since the linker will update instead of replace a preexisting library,
3032 then if the file list changes to remove some object files the old
3033 objects will still exist in the library.
3035 The solution is to remove all old library files when autoconf.mk is
3040 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
3042 Date: Wed Nov 21 08:49:50 2007 -0600
3044 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
3046 Modify libfdt/Makefile to conditionally compile the *.c files based
3047 on the board config.
3051 commit 4a43719a7738712811d822ca8125427b27a55cdc
3053 Date: Mon Sep 24 09:05:31 2007 -0600
3055 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
3057 Modify common/Makefile to conditionally compile the cmd_*.c files based
3058 on the board config.
3062 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
3064 Date: Mon Sep 24 09:05:31 2007 -0600
3066 [BUILD] Generate include/autoconf.mk from board config files
3068 Use cpp and sed to postprocess config.h and import the defined values
3069 into include/autoconf.mk. autoconf.mk is then included by config.mk to
3070 give 'make' access to the board configuration.
3072 Doing this enables conditional compilation at the Makefile level instead
3073 of by wrapping every .c file with #ifdef/#endif wrappers.
3077 commit 68b88999da87ab88e71e1306192905be3450198e
3079 Date: Tue Nov 20 15:02:26 2007 -0600
3081 8610HPCD: Enable the 8610 Display Interface Unit
3085 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
3087 Date: Tue Nov 20 15:00:53 2007 -0600
3089 Move 8610 DIU interface structure definitions to header file.
3091 These two structures are still needed during the
3092 initialization and setup of the DIU hardware.
3093 So move them to the fsl_diu_fb.h file for now.
3099 commit 080c646dbf474a109c3f85718fb01ce042a38c45
3101 Date: Tue Nov 20 20:14:18 2007 +0100
3103 drivers/i2c : move i2c drivers to drivers/i2c
3107 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
3109 Date: Mon Nov 19 22:20:24 2007 +0100
3111 Prepare for 1.3.0 release.
3115 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
3117 Date: Mon Nov 19 10:02:13 2007 -0500
3119 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
3121 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
3125 commit f8c320609366176b31104d9bf5e295232e1c7f1d
3127 Date: Mon Nov 19 11:14:16 2007 +0900
3129 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
3131 lowlevel_init.S: Assembler messages:
3132 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
3134 Looking at codes, the `memtest' and `clearmem' are intentional mixed
3135 use of `global symbols' and `label' for debugging purpose. To make it
3136 build, just disable global-symbols-use for now. As a result `memtest'
3137 still remains as unused, but leave it be...
3141 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
3143 Date: Mon Nov 19 12:59:14 2007 +0100
3145 Fix build problems with mp2usb board
3149 commit 6bf4c686afca1e86e1c384d59218f914605713bf
3151 Date: Sun Nov 18 18:36:11 2007 +0100
3153 s3c24x0: Fix usb_ohci.c missing in Makefile
3154 and usb_ohci.c warning differ in signedness
3158 commit 6073f61e078da5ddb521b56256bcc36508589883
3160 Date: Sun Nov 18 12:55:02 2007 +0100
3162 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
3166 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
3168 Date: Sun Nov 18 17:11:09 2007 +0100
3170 Fix compiler warnings for ARM systems.
3174 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
3176 Date: Sun Nov 18 16:36:27 2007 +0100
3178 Fix compiler warnings for PPC systems. Update CHANGELOG.
3182 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
3184 Date: Sun Nov 18 14:44:44 2007 +0100
3186 ppc4xx: Correct 405EX PCIe UTL register mapping
3188 Map 4k mem space for UTL registers for each port.
3192 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
3194 Date: Sat Nov 17 11:31:10 2007 +0100
3196 Fix warning differ in signedness in net/net.c and net/nfs.c
3198 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
3200 Date: Sat Nov 17 20:42:45 2007 +0900
3202 gth2.c: Fix a warning on gth2 build.
3204 gth2.c: In function 'misc_init_r':
3205 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
3209 commit 2309c130aa4c84b91bd874a41269c923eb61b555
3211 Date: Sat Nov 17 07:58:25 2007 +0100
3213 Fix warning differ in signedness in common/cmd_scsi.c
3217 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
3219 Date: Sat Nov 17 14:52:29 2007 +0100
3221 ppc4xx: Update AMCC Kilauea config file
3223 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
3227 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
3229 Date: Sat Nov 17 20:05:26 2007 +0900
3231 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
3233 Current trick to pick up GNU assembler minor version does not work with the
3234 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
3237 $ sde-as --version |grep "GNU assembler"
3238 GNU assembler 2.15.94 mipssde-6.02.02-20050602
3239 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
3241 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
3245 $ mips-linux-as --version |grep "GNU assembler"
3246 GNU assembler (GNU Binutils) 2.18
3247 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
3249 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
3253 As a result of above, you'll see many noises with such binutils:
3256 /bin/sh: line 0: [: : integer expression expected
3257 /bin/sh: line 0: [: : integer expression expected
3258 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
3259 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
3260 /bin/sh: line 0: [: : integer expression expected
3261 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
3262 /bin/sh: line 0: [: : integer expression expected
3263 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
3264 /bin/sh: line 0: [: : integer expression expected
3266 This patch simplifies the trick and makes it work with both versions of gas.
3267 I also replace an expensive `awk (or gawk)' with `cut'.
3271 commit 16664f72850846e645616da1c0fa5afcd6d15f15
3273 Date: Sat Nov 17 20:05:26 2007 +0900
3275 [MIPS] Remove useless instructions for initializing $gp.
3279 commit 03c031d5660ea946c39af6e2e16267da857c609f
3281 Date: Sat Oct 27 15:27:06 2007 +0900
3283 [MIPS] MIPS 4K core: Coding style cleanups
3289 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
3291 Date: Sat Nov 17 20:05:20 2007 +0900
3293 [MIPS] gth2.c: Fix a warning on gth2 build.
3295 gth2.c: In function 'misc_init_r':
3296 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
3300 commit 4fbd0741b2b6441da10be93e10267122581b7079
3302 Date: Sat Oct 27 15:22:33 2007 +0900
3304 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
3306 au1x00_eth.c: In function 'au1x00_miiphy_write':
3307 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
3311 commit f01320459736f156707425cf8112f98606301aa4
3313 Date: Sat Oct 27 15:00:25 2007 +0900
3315 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
3317 au1x00_eth.c: In function 'au1x00_enet_initialize':
3318 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
3319 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
3320 au1x00_eth.c:246: error: for each function it appears in.)
3321 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
3322 au1x00_eth.c: In function 'au1x00_miiphy_write':
3323 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
3324 make[1]: *** [au1x00_eth.o] Error 1
3326 Fixed by moving these two functions forward.
3330 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
3332 Date: Sat Oct 27 15:00:25 2007 +0900
3334 MAKEALL: Added missing pb1000 board
3338 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
3340 Date: Sat Oct 27 15:00:24 2007 +0900
3342 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
3346 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
3348 Date: Sat Oct 27 15:00:24 2007 +0900
3350 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
3354 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
3356 Date: Sat Nov 17 02:34:38 2007 +0100
3358 Update CHANGELOIG, prepare for -rc4
3362 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
3364 Date: Wed Nov 14 18:58:33 2007 +0100
3366 Fix the i2c frequency and default address in rsdproto board
3368 rsdproto board support has wrong I2C frequency and wrong return value
3373 commit 429c180edad038f91c989cb14b478228092e7054
3375 Date: Sat Nov 17 01:45:38 2007 +0100
3377 powerpc: Backout relocation changes for MPC5121, too.
3379 Apply Grant Likely's backout to MPC5121 code, too.
3385 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
3387 Date: Tue Nov 13 22:18:33 2007 -0700
3389 powerpc: Backout relocation changes.
3391 Ugh. I *hate* to back this change out, but these compiler flags don't
3392 work for relocation on all versions of GCC. I've not been able to
3393 reproduce the environment in my setup (and hence, not been able to
3394 find a combination that *does* work), so I've got no choice but to go
3395 back to the old gcc flags and linker script.
3399 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
3401 Date: Tue Nov 13 09:11:05 2007 +0100
3403 Fixed mips_io_port_base build errors.
3405 This patch has been sent on:
3408 Although mips_io_port_base is currently a part of IDE command, it is quite
3409 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
3410 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
3412 This patch is triggered by multiple definition of `mips_io_port_base' build
3413 error on gth2 (and tb0229 also needs this fix.)
3415 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
3416 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
3417 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
3418 make: *** [u-boot] Error 1
3423 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
3425 Date: Sat Nov 17 01:30:40 2007 +0100
3427 Fix a bug in the slave serial programming mode for the Xilinx
3428 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
3429 the most significant bit was set, which did not work on any
3430 architecture where "char" defaulted to be an unsigned type.
3436 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
3438 Date: Thu Nov 1 12:23:29 2007 -0500
3440 86xx: Fix broken variable reference when #def DEBUGing.
3442 Sometimes you can't reference the DDR2 controller variables.
3446 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
3448 Date: Fri Oct 26 18:32:00 2007 +0800
3450 make 8610 board use pixis reset
3454 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
3456 Date: Mon Oct 29 19:26:21 2007 +0800
3458 Unify pixis_reset altbank across board families
3460 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
3461 into the separate board config files.
3466 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
3468 Date: Wed Nov 7 08:19:21 2007 +0100
3470 Fix warning: pointer targets in assignment differ in signedness
3474 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
3476 Date: Wed Nov 7 08:19:19 2007 +0100
3478 Fix warning differ in signedness in common/cmd_ide.c
3482 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
3484 Date: Fri Nov 16 14:16:54 2007 +0100
3486 ppc4xx: Enable 405EX PCIe UTL register configuration
3488 Till now the UTL registers on 405EX were not initialized but left with
3489 their default values. This patch new initializes some of the UTL
3494 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
3496 Date: Fri Nov 16 14:00:59 2007 +0100
3498 ppc4xx: Update AMCC Makalu for board rev 1.1
3500 This patch adds changes needed for Makalu rev 1.1:
3502 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
3503 - Enable 2nd ethernet port EMAC1
3504 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
3505 - Reset PCIe ports via GPIO upon bootup
3509 commit 4d4faae65e115e327425cd514c1a35146a85166b
3511 Date: Mon Sep 24 09:05:31 2007 -0600
3513 Group PCI and PCMCIA drivers in drivers/Makefile
3517 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
3519 Date: Mon Sep 24 09:05:31 2007 -0600
3521 Group block/flash drivers in drivers/Makefile
3525 commit df58c81551700f058b44cacf55a7997fa63bfe0a
3527 Date: Mon Sep 24 09:05:31 2007 -0600
3529 Group USB drivers in drivers/Makefile
3533 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
3535 Date: Mon Sep 24 09:05:30 2007 -0600
3537 Group i2c drivers in drivers/Makefile
3541 commit ec00c76de0e5971273905998d62d6bb119324218
3543 Date: Mon Sep 24 09:05:30 2007 -0600
3545 Group console drivers in drivers/Makefile
3549 commit 754f230aa01b8c789fc31f8013c2487954073300
3551 Date: Mon Sep 24 09:05:30 2007 -0600
3553 Group network drivers in drivers/Makefile
3557 commit f0037c56b0d12cd46215124667b9f83d60ef9391
3559 Date: Mon Sep 24 09:05:30 2007 -0600
3561 Build: split COBJS value into multiple lines
3563 This change is in preparation for condtitionial compile support in the
3564 build system. By spliting them all into seperate lines now, subsequent
3565 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
3566 be less invasive and easier to review
3570 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
3572 Date: Mon Sep 24 09:05:30 2007 -0600
3574 Add .gitignore files
3579 commit 955413f35f054a82e40042f1dbcf501c6a05719b
3581 Date: Thu Nov 15 08:27:52 2007 -0700
3583 Revert "Correct relocation fixup for mpc5xx"
3585 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
3588 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
3590 Date: Thu Nov 15 08:24:32 2007 -0700
3592 Revert "Correct fixup relocation for MPC5xxx"
3594 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
3597 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
3599 Date: Thu Nov 15 08:21:04 2007 -0700
3601 Revert "Correct fixup relocation for mpc8220"
3603 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
3606 commit 70922342369e5e39b286fe21e768a239ca07a514
3608 Date: Thu Nov 15 08:20:57 2007 -0700
3610 Revert "Correct fixup relocation for mpc824x"
3612 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
3615 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
3617 Date: Thu Nov 15 08:20:50 2007 -0700
3619 Revert "Correct fixup relocation for mpc8260"
3621 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
3624 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
3626 Date: Thu Nov 15 08:20:43 2007 -0700
3628 Revert "Correct fixup relocation for mpc83xx"
3630 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
3633 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
3635 Date: Thu Nov 15 08:20:25 2007 -0700
3637 Revert "[MPC512x] Correct fixup relocation"
3639 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
3642 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
3644 Date: Thu Nov 15 14:25:09 2007 +0100
3646 ppc4xx: Small AMCC Kilauea cleanup
3648 Remove not needed pci_target_init() function.
3652 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
3654 Date: Thu Nov 15 14:23:55 2007 +0100
3656 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
3658 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
3659 - Cleanup of the 4xx GPIO functions
3660 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
3664 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
3666 Date: Thu Nov 15 14:20:08 2007 +0100
3668 ppc4xx: AMCC Taihu board config file cleanup
3670 This patch makes the AMCC Taihu a little more compatible to the other
3675 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
3677 Date: Thu Nov 15 13:37:28 2007 +0100
3679 [INKA4x0] NG hardware: flash support
3681 Disabled and remove inka4x0 custom flash driver, use CFI flash
3686 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
3688 Date: Thu Nov 15 13:29:55 2007 +0100
3690 [INKA4x0] NG hardware: SDRAM support
3692 Add support for three new DDR chips that may be present on a NG
3693 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
3695 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
3699 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
3701 Date: Thu Nov 15 13:24:43 2007 +0100
3703 [INKA4x0] NG hardware: platform code update
3705 - Cleanup compile warnings.
3706 - Add missing '\0' in default environment.
3707 - Increase CFG_MONITOR_LEN to 256 KiB.
3708 - Add required CFG_USE_PPCENV.
3712 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
3714 Date: Thu Nov 15 08:58:00 2007 +0000
3716 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
3717 Remove warnings re onenand_read() & write()
3719 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
3721 Date: Thu Nov 15 08:45:13 2007 +0000
3725 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
3727 Date: Thu Sep 13 18:52:28 2007 +0800
3729 Enable ULi1575 Ethernet support in 8610HPCD config
3734 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
3736 Date: Tue Nov 13 08:18:20 2007 +0100
3738 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
3742 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
3744 Date: Tue Nov 13 08:06:11 2007 +0100
3746 ppc4xx: Fix 405EX PCIe UTLSET register setup
3750 commit 1ce55151c85d068f70317a8d65c61058b891afb4
3752 Date: Tue Nov 13 07:50:29 2007 +0100
3754 [UC101] SRAM now with 2 MB working.
3758 commit 2d14684341109a69616e4d6016cd61402d55086f
3760 Date: Fri Nov 9 15:37:53 2007 +0100
3762 ppc4xx: Use generic usb-ohci driver for sequoia board
3764 This patch makes the sequoia board use the generic usb-ohci driver
3765 instead of cpu/ppc4xx/usb_ohci.c.
3770 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
3772 Date: Fri Nov 9 15:37:23 2007 +0100
3774 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
3776 This patch disables the 44x d-cache on 'usb start' and
3777 reenables it on 'usb stop'. This should be seen as a
3778 temporary fix until the generic usb-ohci driver can
3779 life with d-cache enabled.
3784 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
3786 Date: Fri Nov 9 15:36:44 2007 +0100
3788 ppc4xx: Remove redundant code from 4xx network driver
3790 This patch removes some redundant code and decrements the end
3791 address of cache flush and invalidate by 1.
3796 commit 5ca9881aad8c413ac2a82868a5e3719178254502
3798 Date: Fri Nov 9 15:24:26 2007 +0000
3800 Add apollon board support
3803 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
3805 Date: Fri Nov 9 12:19:58 2007 +0100
3807 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
3811 commit c7f69c340277935a6c19a956421852da944a365f
3813 Date: Fri Nov 9 12:18:54 2007 +0100
3815 ppc4xx: Make output a little shorter on I2C bootrom detection
3817 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
3818 already print a line with the information which I2C bootrom is
3819 used for bootstrap configuration. So we don't need this extra line
3820 with "I2C boot EEPROM en-/dis-abled".
3822 This patch also has a little code cleanup integrated.
3826 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
3828 Date: Thu Nov 8 12:50:18 2007 -0600
3830 ColdFire: MCF5329 - Remove reset registers from CCM
3834 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
3836 Date: Thu Nov 8 12:31:11 2007 -0600
3838 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
3842 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
3844 Date: Thu Nov 8 12:19:01 2007 -0600
3846 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
3850 commit 225a24b5e062ad94627424508ae814f51dbe1a34
3852 Date: Wed Nov 7 18:00:54 2007 -0600
3854 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
3858 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
3860 Date: Wed Nov 7 17:56:15 2007 -0600
3862 ColdFire: MCF532x - Update do_reset() using core reset
3866 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
3868 Date: Wed Nov 7 17:51:00 2007 -0600
3870 ColdFire: Update cpu flag for 4.2-xx compiler
3874 commit 070ba56115b4da63b46e974287fa4550d4023386
3876 Date: Wed Oct 31 14:59:04 2007 -0500
3878 8610: Add console frame buffer support to FSL 8610 DIU driver.
3880 Add cfb console support to FSL 8610 DIU driver.
3881 Inspect board version from PIXIS to obtain correct pixel format.
3883 Use #define CONFIG_VIDEO in config file to enable fb console.
3885 To switch monitor, set monitor variable to
3886 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
3887 followed by "diufb init".
3889 Preserve logo bitmap at the top of the fb console.
3894 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
3896 Date: Mon Oct 29 13:58:39 2007 -0500
3898 8610: Add 8610 DIU display driver
3900 1280x1024 and 1024x768 @ 32 bpp are supported now.
3901 DVI, Single-link LVDS, Double-link LVDS are all supported.
3903 Environmental variable "monitor" is used to specify monitor port.
3905 A new command "diufb" is introduced to reinitialize monitor
3906 and display a BMP file in the memory. So far, 1-bit, 4-bit,
3907 8-bit and 24-bit BMP formats are supported.
3910 - initialize the diu driver
3911 Enable the port specified in the environmental variable "monitor"
3914 - display bmp file in memory.
3915 The bmp image should be no bigger than the resolution, 1280x1024
3916 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
3918 Note, this driver allocate memory but doesn't free it after use
3919 It is written on purpose -- to avoid a failure of reallocation
3920 due to memory fragement.
3922 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
3927 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
3929 Date: Wed Oct 31 10:43:59 2007 -0500
3931 FSL: Add a freescale bitmap logo.
3933 This Freescale logo is a 340 x 128 x 4bpp BMP file
3934 that can be displayed by the DIU Framebuffer driver.
3939 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
3941 Date: Mon Oct 29 13:57:53 2007 -0500
3943 8610: Make some extra debug environment variables conditional.
3945 One may #define ENV_DEBUG to get them back again.
3949 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
3951 Date: Mon Oct 29 19:26:21 2007 +0800
3953 8610: Actually enable pixis_reset CONFIGs
3957 commit f3bceaab230b4748d0afc4109b6837308f018b40
3959 Date: Fri Oct 26 18:31:59 2007 +0800
3961 Fix the BAT definition of PCI IO on 8610 board
3963 The address in the BAT register is aligned with the BAT size.
3964 The original definition actually did not define BAT for PCIE2 IO.
3965 This patch fix this.
3969 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
3971 Date: Mon Oct 29 19:26:21 2007 +0800
3973 Unify pixis_reset altbank across board families
3975 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
3976 into the separate board config files.
3981 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
3983 Date: Fri Oct 26 18:32:00 2007 +0800
3985 make 8610 board use pixis reset
3989 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
3991 Date: Thu Nov 1 12:23:29 2007 -0500
3993 86xx: Fix broken variable reference when #def DEBUGing.
3995 Sometimes you can't reference the DDR2 controller variables.
3999 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
4001 Date: Mon Nov 5 17:39:24 2007 +0800
4003 Implement general ULi 526x Ethernet driver support in U-boot
4005 This patch implements general ULi 526x Ethernet driver.
4006 Until now, it is the only native Ethernet port on
4007 MPC8610HPCD board, but it could be used on other boards
4008 with ULi 526x Ethernet port as well.
4015 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
4017 Date: Thu Nov 1 08:46:50 2007 -0500
4019 NET: Add Ethernet 1000BASE-X support for PPC4xx
4021 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
4022 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
4023 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
4024 "mii info" command is modified to distinguish between 1000BASE-T and -X.
4029 commit 298035df4948b113d29ac0e694717d34b95bc5dc
4031 Date: Wed Oct 31 11:21:29 2007 -0500
4033 NET: Cosmetic changes
4038 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
4040 Date: Mon Nov 5 07:43:05 2007 +0100
4042 ppc4xx: Make output a little shorter on PCIe detection
4044 Now not max 3 lines but 2 lines are printed per PCIe port.
4048 commit 992742a5b09d9040adbd156fb90756af66ade310
4050 Date: Sat Nov 3 23:09:27 2007 +0100
4052 Cleanup coding style; update CHANGELOG
4056 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
4058 Date: Fri Nov 2 13:15:42 2007 -0700
4060 fix wording in README
4062 Changed the wording to properly describe the shadowing
4063 of the environment from ROM to RAM
4067 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
4069 Date: Wed Oct 31 02:18:15 2007 +0900
4071 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
4075 commit ec22755799466c8a103664bb3a5e647bf9c238f4
4077 Date: Thu Oct 25 16:08:14 2007 +0300
4079 Trimmed some variables in ne2000.c
4083 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
4085 Date: Thu Oct 25 17:51:27 2007 +0800
4087 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
4089 The scan code of the key 'z' is 0x1d, which should be handled.
4091 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
4096 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
4098 Date: Thu Oct 25 17:30:04 2007 +0800
4100 Fix USB support issue for MPC8641HPCN board.
4102 The configuration file has already enabled USB, but it
4103 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
4104 on MPC8641HPCN can not work because of the wrong USB
4107 And add the USB command to U-Boot commands list.
4111 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
4113 Date: Wed Oct 24 18:16:01 2007 +0200
4115 Use config_cmd_default.h instead of config_cmd_all.h
4119 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
4121 Date: Wed Oct 24 01:37:36 2007 +0200
4123 TQM5200: Call usb_cpu_init() during board init
4125 usb_cpu_init() configures GPS USB pins, clocks, etc. and
4126 is required for proper operation of kernel USB subsystem.
4127 This setup was previously done in the kernel by the fixup
4128 code which is being removed, thus low level init must be
4133 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
4135 Date: Tue Oct 23 16:25:50 2007 +0200
4139 An obvious typo. Originally fixed in linkstation u-boot port.
4143 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
4145 Date: Tue Oct 23 14:35:05 2007 +0200
4147 Fix a typo in cpu/mpc824x/interrupts.c
4149 Since December 2003 the timer_interrupt_cpu() function in
4150 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
4151 parameter. Remove it.
4155 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
4157 Date: Wed Oct 17 11:13:51 2007 +0200
4159 add ft_cpu_setup(..) on mpc8260
4161 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
4162 based on code from mpc5xxx
4167 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
4169 Date: Wed Oct 17 11:18:42 2007 +0200
4171 changes for IDS8247 board support
4173 To get the IDS8247 board working following are done:
4174 - FCC2 is deactivated
4177 - CFI driver is activated
4178 - Adapted for use with LIBFDT
4183 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
4185 Date: Sat Nov 3 12:08:28 2007 +0100
4187 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
4189 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
4190 Again, only one image supports both targets.
4194 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
4196 Date: Wed Oct 24 15:48:37 2007 +0200
4198 ATSTK1002: Remove default ethernet addresses
4200 Wolfgang is right: It's not a good idea to set up default initial
4201 ethernet addresses for a board, even though they belong to the local
4204 This will change the failure mode from "IT manager screams at you for
4205 using duplicate ethernet addresses" to a nice error message explaining
4206 that the ethernet address hasn't been set properly.
4210 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
4212 Date: Mon Oct 29 17:40:35 2007 -0400
4216 This is a multi-part message in MIME format.
4218 commit e6e505eae94ed721e123e177489291fc4544b7b8
4220 Date: Mon Oct 29 17:19:03 2007 -0400
4222 Found a bug in the way the DHCP Request packet is built, where the IP address
4223 that is offered by the server is bound to prematurely. This patch is a fix of
4224 that bug where the IP address offered by the DHCP server is not used until
4225 after the DHCP ACK from the server is received.
4230 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
4232 Date: Wed Oct 31 20:58:34 2007 +0100
4234 ppc4xx: Fix acadia_nand build problem
4236 Since the cache handling functions were moved from start.S into cache.S
4237 the acadia NAND booting Makfile needs to be adapted accordingly.
4241 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
4243 Date: Wed Oct 31 20:57:11 2007 +0100
4245 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
4247 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
4248 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
4249 boards by defining CONFIG_4xx_DCACHE in the board config file. This
4250 option will disappear, when more boards use is successfully and no
4251 more known problems exist.
4253 This is tested successfully on Sequoia and Katmai. The only problem that
4254 needs to be fixed is, that USB is not working on Sequoia right now, since
4255 it will need some cache handling code too, similar to the 4xx EMAC driver.
4259 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
4261 Date: Wed Oct 31 20:51:10 2007 +0100
4263 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
4265 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
4266 disable the cache for the CPU POST tests, since these tests consist
4267 of self modifying code. This is done via the new change_tlb() function.
4271 commit f71b2888b4b3c870909a0341427b2a914246f81f
4273 Date: Wed Oct 31 20:47:26 2007 +0100
4275 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
4277 This patch enables the 4xx EMAC POST driver to work too, when dcache is
4282 commit a2685904061b35a17583d65fe47cdc2686a69eaa
4284 Date: Wed Oct 31 20:45:53 2007 +0100
4286 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
4290 commit ff768cb168d8157c24a25016dbfbeb465e47f420
4292 Date: Wed Oct 31 18:01:24 2007 +0100
4294 ppc4xx: Change 4xx ethernet driver to handle cached memory too
4296 This patch enables the 4xx EMAC driver to work too, when dcache is
4301 commit 483e09a223c666269ef81d3573a6591b1046b0ef
4303 Date: Wed Oct 31 17:59:22 2007 +0100
4305 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
4307 This function is used to either turn cache on or off in a specific
4312 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
4314 Date: Wed Oct 31 17:57:52 2007 +0100
4316 ppc4xx: Remove cache definition from 4xx board config files
4318 All 4xx board config files don't need the cache definitions anymore.
4319 These are now defined in common headers.
4323 commit 9b94ac61d2176185c30adf0793e079ec30e68687
4325 Date: Wed Oct 31 17:55:58 2007 +0100
4327 ppc4xx: Rework 4xx cache support
4329 New cache handling functions added and all existing functions
4330 moved from start.S into seperate cache.S.
4334 commit 06713773da4ac3d390c63d82641eb553224b27c2
4336 Date: Tue Oct 23 18:03:12 2007 +0200
4338 ppc4xx: Remove compiler warning from previous commit
4342 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
4344 Date: Tue Oct 23 14:40:30 2007 +0200
4346 ppc4xx: Remove temporary TLB entry in POST cache test
4350 commit 1338e6a81834099ba19733b69aafd8ef5f098094
4352 Date: Tue Oct 23 14:05:08 2007 +0200
4354 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
4356 I lately noticed, that newer 4xx board with GBit support sometimes don't
4357 finish link autonegotiation in 4 seconds. Changing this timeout to 5
4358 seconds seems fine here.
4362 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
4364 Date: Tue Oct 23 14:03:17 2007 +0200
4366 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
4368 This patch changes all in32/out32 calls to use the recommended in_be32/
4369 out_be32 macros instead.
4373 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
4375 Date: Thu Oct 25 12:24:59 2007 +0200
4377 ppc4xx: Fix POST ethernet test for Haleakala
4379 The POST ethernet test needed to be changed to dynamically determine
4380 the count of ethernet devices. This code is cloned from the 4xx
4385 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
4387 Date: Tue Oct 23 11:31:05 2007 +0200
4389 ppc4xx: Correct UART input clock calculation and passing to fdt
4391 We now use a value in the gd (global data) structure for the UART input
4392 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
4397 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
4399 Date: Tue Oct 23 10:10:08 2007 +0200
4401 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
4403 The Haleakala is nearly identical with the Kilauea eval board. The only
4404 difference is that the 405EXr only supports one EMAC and one PCIe
4405 interface. This patch adds support for the Haleakala board by using
4406 the identical image for Kilauea and Haleakala. The distinction is done
4407 by comparing the PVR.
4411 commit 9f798766aa85e62eb8fa8c721e148df609b78137
4413 Date: Tue Oct 23 08:29:10 2007 +0200
4415 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
4417 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
4421 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
4422 modules are still plugged in. So it is recommended to remove the DIMM
4423 modules while using the NAND booting code with the fixed SDRAM setup!
4428 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
4430 Date: Mon Oct 22 16:24:44 2007 +0200
4432 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
4436 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
4438 Date: Mon Oct 22 16:22:40 2007 +0200
4440 ppc4xx: Rework of 4xx serial driver (4)
4444 - Use in_8/out_8 macros instead of in8/out8
4445 - No need for UART_BASE marco anymore, now really handled via function
4447 - serial_init_common() introduced
4448 - Further coding style cleanup
4452 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
4454 Date: Mon Oct 22 15:45:49 2007 +0200
4456 ppc4xx: Rework of 4xx serial driver (3)
4458 Change all linker scripts to reference the changed driver name iop480_uart.o.
4462 commit 882ae41274921f9016131806bdeb27e19606f47a
4464 Date: Mon Oct 22 15:44:39 2007 +0200
4466 ppc4xx: Rework of 4xx serial driver (2)
4468 Change all linker scripts to reference the changed driver name 4xx_uart.o.
4470 Note: In most cased all these explicit referencing of these object files
4471 in the linker scripts is not neccessary. Only for manually embedded
4472 environment into the U-Boot image, which is not done is most cases.
4476 commit ad31e40bed042cb670d0036fea96435007afb838
4478 Date: Mon Oct 22 15:09:59 2007 +0200
4480 ppc4xx: Rework of 4xx serial driver (1)
4482 This patch starts the rework of the PPC4xx serial driver. First we split
4483 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
4484 handling code and the other one iop480_uart.c with the UART code for the
4485 PLX-Tech IOP480 PPC (PPC403 based).
4489 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
4491 Date: Mon Oct 22 10:30:38 2007 +0200
4493 ppc4xx: Correct UART input clock calculation and passing to fdt
4497 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
4499 Date: Mon Oct 22 07:34:34 2007 +0200
4501 ppc4xx: Add initial AMCC Makalu 405EX support
4505 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
4507 Date: Mon Oct 22 07:33:52 2007 +0200
4509 ppc4xx: Add freqUART to CPU speed detection
4511 This value is needed later for the device tree configuration of
4516 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
4518 Date: Sun Oct 21 14:26:29 2007 +0200
4520 ppc: Small Kilauea cleanup of config file
4524 commit 758c037aeead34b49631b8da3a90b1bba14c0410
4526 Date: Sun Oct 21 08:16:12 2007 +0200
4528 rtc: Add Xicor/Intersil X1205 RTC support
4530 This patch adds support for the Xicor/Intersil X1205 RTC used on the
4531 AMCC Makalu eval board. This driver is basically cloned from the Linux
4532 driver version (2.6.23).
4534 This patch also introduces the Linux bcd.h header for the BCD2BIN/
4535 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
4536 should be converted to also use this header instead of implementing
4537 their own local copy of these functions/macros.
4541 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
4543 Date: Sun Oct 21 08:12:41 2007 +0200
4545 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
4547 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
4548 PPC440_SYS_INFO structure into the common ppc4xx.h header.
4550 Lot's of other macros are good candidates to be consolidated this way
4555 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
4557 Date: Sun Oct 21 08:05:18 2007 +0200
4559 ppc4xx: Fix size setup in Kilauea DDR2 init routine
4561 The size was initilized wrong. Instead of 256MB, the DDR2 controller
4562 was setup to 512MB. Now the correct values is used.
4564 This patch also does a little cleanup and adds a comment here.
4568 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
4570 Date: Thu Oct 18 17:29:04 2007 +0200
4572 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
4574 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
4575 number is used to access system registers.
4580 commit c36c68160333ac5fe41ec3db12a728b7075b3912
4582 Date: Thu Oct 18 07:42:27 2007 +0200
4584 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
4586 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
4587 is the internal SRAM. Since I now ported and tested this endpoint mode
4588 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
4591 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
4596 commit 5cb4af4791f61843432155142b6cfac901f66c10
4598 Date: Thu Oct 18 07:39:38 2007 +0200
4600 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
4602 This patch adds endpoint support for the AMCC Kilauea eval board. It can
4603 be tested by connecting a reworked PCIe cable (only 1x lane singles
4604 connected) to another root-complex.
4606 In this test setup, a 64MB inbound window is configured at BAR0 which maps
4607 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
4608 access the first 64MB of the SDRAM on the PPC side.
4612 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
4614 Date: Sat Oct 13 16:43:23 2007 +0200
4616 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
4618 This patch adds support for dynamic configuration of PCIe ports for the
4619 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
4620 boards Yucca & Katmai and the 405EX board Kilauea.
4622 This dynamic configuration is done via the "pcie_mode" environement
4623 variable. This variable can be set to "EP" or "RP" for endpoint or
4624 rootpoint mode. Multiple values can be joined via the ":" delimiter.
4629 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
4632 Per default Yucca will be configured as:
4635 Per default Katmai will be configured as:
4638 Per default Kilauea will be configured as:
4644 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
4646 Date: Thu Oct 11 11:15:59 2007 +0200
4648 ppc4xx: Enable device tree support (fdt) on Kilauea per default
4650 This patch enables the fdt support on the AMCC Kilauea eval board.
4651 Additionally now EBC ranges fdt fixup is included to support NOR
4652 FLASH mapping via the Linux physmap_of driver.
4654 This Kilauea port now support booting arch/ppc and arch/powerpc
4655 Linux kernels. The default environment "net_nfs" is for arch/ppc
4656 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
4657 support will be removed.
4661 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
4663 Date: Thu Oct 11 11:11:45 2007 +0200
4665 ppc4xx: Add additional debug info to 4xx fdt support
4669 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
4671 Date: Fri Oct 5 21:28:58 2007 +0200
4673 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
4677 commit 1941cce71b1ae975602854045061e82f94ecd012
4679 Date: Fri Oct 5 17:35:10 2007 +0200
4681 ppc4xx: Fix small merge problem in 4xx_enet.c
4685 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
4687 Date: Fri Oct 5 17:11:30 2007 +0200
4689 ppc4xx: Add initial AMCC Kilauea 405EX support
4693 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
4695 Date: Fri Oct 5 17:10:59 2007 +0200
4697 ppc4xx: Add PPC405EX support
4701 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
4703 Date: Fri Oct 5 17:09:36 2007 +0200
4705 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
4709 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
4711 Date: Fri Oct 5 17:07:50 2007 +0200
4713 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
4717 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
4719 Date: Fri Oct 5 17:04:57 2007 +0200
4721 POST: Add 405EX support to 4xx UART POST test
4725 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
4727 Date: Fri Oct 5 15:10:02 2007 +0200
4729 DTT: Prepare DS1775 driver for use of different I2C addresses
4733 commit 19e93b1e16d267220440d827b920fbad8abfa70f
4735 Date: Fri Oct 5 14:23:43 2007 +0200
4737 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
4741 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
4743 Date: Fri Oct 5 09:22:33 2007 +0200
4745 ppc4xx: 4xx_pcie: Disable debug output as default
4749 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
4751 Date: Fri Oct 5 09:18:23 2007 +0200
4753 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
4757 commit 4dbee8a90df613eb517aadbecebd70f168913d30
4759 Date: Fri Oct 5 07:57:20 2007 +0200
4761 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
4763 128MB seems to be the smallest possible value for the memory size
4764 for on PCIe port. With this change now the BAR's of the PCIe cards
4765 are accessible under U-Boot.
4767 One big note: This only works for PCIe port 0 & 1. For port 2 this
4768 currently doesn't work, since the base address is now 0xc0000000
4769 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
4770 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
4771 to change the base addresses completely and this change would have
4772 too much impact right now.
4774 This patch adds debug output to the 4xx pcie driver too.
4778 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
4780 Date: Wed Oct 3 21:16:32 2007 +0200
4782 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
4786 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
4788 Date: Wed Oct 3 15:01:02 2007 +0200
4790 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
4792 These files were introduced with the IBM 405GP but are currently used on all
4793 4xx PPC platforms. So the name doesn't match the content anymore. This patch
4794 renames the files to 4xx_pci.c/h.
4798 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
4800 Date: Wed Oct 3 14:14:58 2007 +0200
4802 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
4806 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
4808 Date: Wed Oct 3 10:38:09 2007 +0200
4810 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
4812 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
4813 the SDR registers of the PCIe ports. This makes the overall design
4814 clearer, since it removed a lot of switch statements which are not
4817 Also, the functions ppc4xx_init_pcie_rootport() and
4818 ppc4xx_init_pcie_entport() are merged into a single function
4819 ppc4xx_init_pcie_port(), since most of the code was duplicated.
4820 This makes maintainance and porting to other 4xx platforms
4825 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
4827 Date: Wed Oct 3 07:48:09 2007 +0200
4829 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
4831 This patch is the first patch of a series to make the 440SPe PCIe code
4832 usable on different 4xx PPC platforms. In preperation for the new 405EX
4833 which is also equipped with PCIe interfaces.
4835 (2) This patch renames the functions from 440spe_ to 4xx_ with a
4836 little additional cleanup
4840 commit c7c6da23028f146d912514b95aefa3da7cf37699
4842 Date: Wed Oct 3 07:34:10 2007 +0200
4844 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
4846 This patch is the first patch of a series to make the 440SPe PCIe code
4847 usable on different 4xx PPC platforms. In preperation for the new 405EX
4848 which is also equipped with PCIe interfaces.
4850 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
4854 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
4856 Date: Wed Oct 24 01:37:36 2007 +0200
4858 TQM5200: Call usb_cpu_init() during board init
4860 usb_cpu_init() configures GPS USB pins, clocks, etc. and
4861 is required for proper operation of kernel USB subsystem.
4862 This setup was previously done in the kernel by the fixup
4863 code which is being removed, thus low level init must be
4869 commit b5af773f8d92677e06f3295b45557c9d0a487c24
4871 Date: Thu Oct 25 17:51:27 2007 +0800
4873 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
4875 The scan code of the key 'z' is 0x1d, which should be handled.
4877 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
4883 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
4885 Date: Mon Oct 15 11:59:17 2007 +0200
4887 PXA USB OHCI: "usb stop" implementation.
4889 Some USB keys need to be switched off before loading the kernel
4890 otherwise they can remain in an undefined status which prevents them
4891 to be correctly recognized by the kernel.
4896 commit 31548249decf18a6b877a18436b6139dd483fe4a
4898 Date: Mon Oct 29 17:40:35 2007 -0400
4902 This is a multi-part message in MIME format.
4904 commit e6e505eae94ed721e123e177489291fc4544b7b8
4906 Date: Mon Oct 29 17:19:03 2007 -0400
4908 Found a bug in the way the DHCP Request packet is built, where the IP address
4909 that is offered by the server is bound to prematurely. This patch is a fix of
4910 that bug where the IP address offered by the DHCP server is not used until
4911 after the DHCP ACK from the server is received.
4916 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
4918 Date: Thu Oct 25 17:16:22 2007 -0500
4920 ColdFire 54455: Fix correct boot location for atmel and intel
4924 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
4926 Date: Thu Oct 25 17:14:00 2007 -0500
4928 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
4932 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
4934 Date: Thu Oct 25 17:12:36 2007 -0500
4936 ColdFire 5329: Assign correct SDRAM size and fix cache
4940 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
4942 Date: Thu Oct 25 17:10:23 2007 -0500
4944 ColdFire 5253: Assign correct SDRAM size
4948 commit 2acefa72ee0026f862ab65597ca687428f63a973
4950 Date: Thu Oct 25 17:09:17 2007 -0500
4952 ColdFire 5282: Fix external flash boot and return dramsize
4956 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
4958 Date: Thu Oct 25 17:20:01 2007 +0200
4960 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
4964 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
4966 Date: Wed Oct 24 08:42:25 2007 +0200
4968 TQM5200: fix spurious characters on second serial interface
4970 With this patch PSC3 is configured as UART. This is done, because if
4971 the pins of PSC3 are not configured at all (-> all pins are GPI),
4972 due to crosstalk, spurious characters may be send over the RX232_2_TXD
4978 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
4980 Date: Wed Oct 24 08:41:27 2007 +0200
4982 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
4984 Some commands for the STK52xx base board try to access the SM501 grafic
4985 controller. But the TQM5200S has no grafic controller (only the TQM5200
4986 and the TQM5200B have). This patch deactivates the commands accessing
4987 the SM501 for the TQM5200S.
4992 commit b31f64343ead9482cd439b1adbe4c34026a641b1
4994 Date: Mon Oct 22 16:45:53 2007 +0200
4996 TQM5200: fix spurious characters on second serial interface
4998 With this patch PSC3 is configured as UART. This is done, because if
4999 the pins of PSC3 are not configured at all (-> all pins are GPI),
5000 due to crosstalk, spurious characters may be send over the RX232_2_TXD
5005 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
5007 Date: Mon Oct 22 16:40:06 2007 +0200
5009 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
5011 Some commands for the STK52xx base board try to access the SM501 grafic
5012 controller. But the TQM5200S has no grafic controller (only the TQM5200
5013 and the TQM5200B have). This patch deactivates the commands accessing
5014 the SM501 for the TQM5200S.
5018 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
5020 Date: Sun Oct 21 09:14:28 2007 +0200
5022 Mips: Fix string functions differ prototype declaration
5026 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
5028 Date: Fri Oct 19 17:51:40 2007 -0500
5030 fsl_pci_init enable COMMAND_MEMORY if inbound window
5032 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
5033 to pciauto_setup_device has the side effect of not getting
5038 commit e9d0d527992566ebef9826962ff1745b2f082b92
5040 Date: Fri Oct 19 10:55:24 2007 +0200
5042 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
5046 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
5048 Date: Fri Oct 19 08:10:15 2007 +0200
5050 fix warning: no return statement in function returning non-void
5054 commit e78220f6e514206757acfe247297fc9a328a881f
5056 Date: Fri Oct 19 06:33:45 2007 +0200
5058 xsengine: Fix no partition type specified, use DOS as default
5062 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
5064 Date: Fri Oct 19 00:24:59 2007 +0200
5066 lubbock: Fix no partition type specified, use DOS as default
5070 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
5072 Date: Tue Oct 23 16:50:03 2007 +0200
5074 Coding style: keep lists sorted; update CHANGELOG
5078 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
5080 Date: Fri Oct 19 00:09:05 2007 +0200
5082 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
5086 commit 96455bfebc9887837095c9051d216f53c61b5f10
5088 Date: Fri Oct 19 00:07:39 2007 +0200
5090 Fix warning differ in signedness in board/innokom/innokom.c
5094 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
5096 Date: Fri Oct 19 00:25:33 2007 +0200
5098 fix pxa255_idp board
5100 The pxa255_idp being an old unmaintained board showed several issues:
5101 1. CONFIG_INIT_CRITICAL was still defined.
5102 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
5103 3. Symbol flash_addr was undeclared.
5104 4. The boards lowlevel_init function was still called memsetup.
5105 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
5106 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
5107 'target CPU does not support interworking' warnings on recent compilers.
5108 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
5109 indexes rather than the register definitions from the pxa-regs header
5110 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
5111 avoid any ambiguities.
5112 8. There were several redefinition warnings concerning ICMR, OSMR3,
5113 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
5114 9. The board configuration file was rather outdated.
5115 10. The part header file defined the vendor, product and revision arrays
5116 as unsigned chars instead of just chars in the block_dev_desc_t
5121 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
5123 Date: Wed Oct 17 11:56:31 2007 -0500
5125 Make MPC8266ADS command selection more robust
5127 Fix MPC8266 command line definition so it won't break when new commands
5128 are added to u-boot.
5131 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
5133 Date: Tue Oct 23 13:14:10 2007 +0200
5135 Motion-PRO: Update configuration to accomodate next generation board.
5137 New board has faster oscillator and a different Flash chip. This affects:
5140 - Flash CS configuration (timings)
5141 - Flash sector size, and thus MTD partition layout
5142 - malloc() arena size (due to bigger Flash sectors)
5143 - smaller memory test range (due to bigger malloc() arena)
5145 This patch also enables more extensive memory testing via "mtest".
5149 commit eff501904df2bf1724a750062628ba2c51dbb1f8
5151 Date: Tue Oct 23 11:36:07 2007 +0200
5153 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
5155 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
5156 register must be written a value of 0x00000004 as the first step of the
5157 SDRAM contorller configuration.
5161 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
5163 Date: Tue Oct 23 10:22:16 2007 +0100
5165 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
5167 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
5169 Date: Tue Oct 23 10:17:42 2007 +0200
5171 ppc4xx: lwmon5: Some further GPIO config changes
5175 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
5177 Date: Sun Oct 21 22:10:10 2007 +0900
5179 [MIPS] Fix UNCACHED_SDRAM
5181 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
5186 commit 00101dd7a32d12f698150123e47e4b3420279f86
5188 Date: Sun Oct 21 21:30:42 2007 +0900
5190 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
5194 commit eb700636db017d310edaeb559b13d82588560674
5196 Date: Sun Oct 21 10:55:37 2007 +0900
5198 [MIPS] u-boot.lds: Define _gp in a standard manner
5202 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
5204 Date: Sun Oct 21 10:55:36 2007 +0900
5206 [MIPS] Fix $gp usage
5208 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
5209 As a general principle, we should use _gp for $gp.
5211 Thanks to linker script's help we fortunately have _gp which equals to
5212 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
5213 be able to access to GOT entires, global variables and procedure entry
5214 points. The right thing to do is to use _gp.
5216 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
5217 which holds the offset from _gp. When updating GOT entries, we use this
5218 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
5221 I made some change to leave over num_got_entries.
5226 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
5228 Date: Sun Oct 21 10:55:36 2007 +0900
5230 [MIPS] u-boot.lds: Fix __got_start and __got_end
5232 Ensure that __got_start points to top of the `.got', and __got_end points
5233 to bottom as well, so that we never fail to count num_got_entries.
5237 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
5239 Date: Sun Oct 21 10:55:36 2007 +0900
5241 [MIPS] u-boot.lds: Remove duplicated .sdata section
5245 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
5247 Date: Sun Oct 21 01:01:17 2007 +0200
5249 Minor coding style cleanup; update CHANGELOG
5253 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
5255 Date: Thu Oct 4 20:47:10 2007 +0300
5259 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
5260 to do anything in eth_stop() if eth_init() was not called.
5261 Simplified RX path in order to avoid timeouts on really really
5262 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
5263 clever enough to cope with 1 packet per eth_rx().
5267 commit df90968b48fb34fa9072fab150db2ac89678f537
5269 Date: Mon Sep 24 13:32:13 2007 -0400
5271 Setting MSR[DE] in do_reset
5274 This patch ensures the soft reset of the board for the 85xx boards
5275 by setting the MSR[DE] in the do_reset function.
5279 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
5281 Date: Mon Sep 24 13:36:01 2007 -0400
5286 This patch fixes the MSR overwrite in the start.S when moving out of
5291 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
5293 Date: Fri Oct 19 11:33:48 2007 -0500
5295 tsec driver should clear RHALT on startup
5297 This was causing problems for some people.
5303 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
5305 Date: Thu Oct 11 00:29:18 2007 -0500
5307 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
5309 On the MPC85xx CDS we have two issues:
5311 1. The device tree fixup code did not check to see if the property we are
5312 trying to update is actually found. Its possible that it would update
5313 random memory starting at 0.
5315 2. Newer Linux kernel's have moved the location of the PCI nodes to be
5316 sibilings of the soc node and not children. The explicit PATH to the PCI
5317 node would not be found for these device trees. Add the ability to handle
5318 both paths. In the future we shouldn't handle such fixups by explicit path.
5322 commit a3063eec775719b7e91023bbec3f64b3118791df
5324 Date: Thu Oct 11 00:18:48 2007 -0500
5326 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
5328 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
5329 console. Make it so we match that config what we tell Linux as the early
5334 commit e1ce3cb617bb06f91f82f98915391175addf3e82
5336 Date: Tue Oct 2 11:12:27 2007 -0500
5338 Remove magic numbers from cache related operations for mpc85xx
5340 The mpc85xx start code uses some magic numbers that we actually
5341 have #defines for in <config.h> so use those instead.
5345 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
5347 Date: Fri Oct 19 16:47:26 2007 +0200
5353 commit 281df457c1aa50d2752165d0c5c3282d4027b974
5355 Date: Thu Oct 18 17:47:19 2007 +0800
5357 mpc83xx: Add configure entry for MPC83xx ATM support
5359 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
5365 commit d2646554f529a9577515eceb0ec5eceee18244ba
5367 Date: Thu Oct 18 17:44:38 2007 +0800
5369 mpc83xx: pq-mds-pib.c typo error
5371 Correct to val8 from val.
5376 commit 3e11ae80fec1ee12194940955431186abf6009c2
5378 Date: Wed Oct 17 15:40:19 2007 +0200
5380 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
5384 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
5386 Date: Tue Oct 16 15:27:43 2007 -0500
5388 Initial mpc8610hpcd Makefile files.
5395 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
5397 Date: Tue Oct 16 15:26:51 2007 -0500
5399 Initial mpc8610hpcd cpu/, README and include/ files.
5406 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
5408 Date: Tue Oct 16 13:54:01 2007 -0500
5410 Initial mpc8610hpcd board files.
5417 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
5419 Date: Tue Oct 16 14:50:40 2007 -0500
5421 Make MPC8266ADS board compile again.
5425 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
5427 Date: Mon Aug 27 12:41:03 2007 -0500
5429 86xx: Allow for fewer DDR slots per memory controller.
5431 As a direct correlation exists between DDR DIMM slots
5432 and SPD EEPROM addresses used to configure them, use
5433 the individually defined SPD_EEPROM_ADDRESS* values to
5434 determine if a DDR DIMM slot should have its SPD
5435 configuration read or not.
5437 Effectively, this now allows for 1 or 2 DIMM slots
5438 per memory controller.
5442 commit 4d4a945e189a2f384c66432316da2788a0ac1607
5444 Date: Mon Oct 15 11:59:17 2007 +0200
5446 PXA USB OHCI: "usb stop" implementation.
5448 Some USB keys need to be switched off before loading the kernel
5449 otherwise they can remain in an undefined status which prevents them
5450 to be correctly recognized by the kernel.
5454 commit e2e93442e558cf1500e92861f99713b2f045ea22
5456 Date: Mon Oct 15 11:39:00 2007 +0200
5458 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
5460 The I2C bootstrap values that can be setup via the "bootstrap" command,
5461 were setup incorrect regarding the generation of the internal sync PCI
5462 clock. The values for PLB clock == 133MHz were slighly incorrect and the
5463 values for PLB clock == 166MHz were totally incorrect. This could
5464 lead to a hangup upon booting while PCI configuration scan.
5466 This patch fixes this issue and configures valid PCI divisor values
5467 for the sync PCI clock, with respect to the provided external async
5470 Here the values of the formula in the chapter 14.2 "PCI clocking"
5471 from the 440EPx users manual:
5473 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
5475 33MHz async PCI frequency:
5477 => 32 <= 44.3 <= 65 (div = 3)
5480 => 32 <= 55.3 <= 65 (div = 3)
5482 66MHz async PCI frequency:
5484 => 65 <= 66.5 <= 132 (div = 2)
5487 => 65 <= 83 <= 132 (div = 2)
5491 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
5493 Date: Mon Oct 15 11:29:33 2007 +0200
5495 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
5497 The BCSR status bit for the 66MHz PCI operation was correctly
5498 addressed (MSB/LSB problem). Now the correct currently setup
5499 PCI frequency is displayed upon bootup.
5501 This patch also fixes this problem on Rainier & Yellowstone, since these
5502 boards use the same souce code as Sequoia & Yosemite do.
5506 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
5508 Date: Wed Sep 26 17:55:56 2007 +0200
5510 TQM860M: adjust for doubled flash sector size.
5512 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
5513 doubled sector size.
5517 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
5519 Date: Wed Sep 26 17:55:54 2007 +0200
5521 TQM8xx: Fix CAN timing.
5525 commit d43e489baf02afae49077791fb22332d240d8656
5527 Date: Thu Sep 27 14:54:36 2007 +0200
5529 TQM866M: fix SDRAM refresh
5531 At 133 MHz the current SDRAM refresh rate is too fast
5532 (measured 4 * 1.17 us).
5533 CFG_MAMR_PTA changes from 39 to 97. This result
5534 in a refresh rate of 4 * 7.8 us at the default clock
5535 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
5536 This is a compromise until a new method is found to
5537 adjust the refresh rate.
5541 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
5543 Date: Wed Sep 26 17:55:55 2007 +0200
5545 TQM866M: adjust for doubled flash sector size.
5547 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
5548 doubled sector size.
5552 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
5554 Date: Sun Oct 14 16:12:29 2007 +0200
5556 [FIX] XUPV2P change command handling
5557 and remove code violation
5559 commit 636400198228d96983c06657b17f760f5989958e
5561 Date: Sun Oct 14 00:13:19 2007 +0200
5563 Prepare for 1.3.0-rc3 release
5567 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
5569 Date: Sat Sep 29 13:41:37 2007 +0200
5571 Fix warning differ in signedness in cpu/pxa/mmc.c
5575 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
5577 Date: Sat Oct 13 23:51:14 2007 +0200
5579 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
5584 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
5586 Date: Sat Oct 13 21:15:39 2007 +0200
5588 Coding Style cleanup.
5592 commit e1893815b0999410d7a327589611c7b38e95299e
5594 Date: Fri Oct 12 15:49:39 2007 +0200
5600 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
5602 Date: Tue Oct 9 13:58:24 2007 +0200
5604 [ads5121] EEPROM support added.
5608 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
5610 Date: Sat Oct 6 18:55:35 2007 +0200
5612 AVR32: Initialize bi_flash* in board_init_r
5614 The ATSTK1000-specific flash driver intializes bi_flashstart,
5615 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
5618 Initialize these in board_init_r instead so that things will still be
5619 set up correctly when we switch to the CFI driver.
5623 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
5625 Date: Fri Oct 5 10:40:54 2007 +0200
5627 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
5631 commit 92869195ef8210758d2176230c0a36897afd50ed
5633 Date: Fri Oct 5 09:46:06 2007 +0200
5635 CM5200: Fix missing null-termination in hostname manipulation code
5639 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
5641 Date: Tue Oct 2 19:09:01 2007 +0200
5643 Fix memtest breakage
5645 CFG_MEMTEST_START uses weird magic involving gd, which fails to
5646 compile. Use hardcoded values instead (we actually know how much RAM
5651 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
5653 Date: Tue Oct 2 11:44:46 2007 +0200
5655 ppc4xx: Coding style cleanup
5659 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
5661 Date: Tue Oct 2 11:44:19 2007 +0200
5663 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
5667 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
5669 Date: Mon Oct 1 09:51:50 2007 +0200
5671 Program EPLD to force full duplex mode for PHY.
5673 EPLD forces modes of PHY operation. By default full duplex is turned off.
5674 This fix turns it on.
5678 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
5680 Date: Mon Sep 24 14:50:32 2007 +0300
5682 Bugfix: Use only one PTD for one endpoint
5684 Original isp116x-hcd code prepared multiple PTDs for longer than 16
5685 byte transfers for one endpoint. That is unnecessary because the
5686 ISP116x is able to split long data from one PTD into multiple
5687 transactions based on the buffer size of the endpoint. It also caused
5688 serious problems if the endpoint NAKed some of the transactions. In
5689 that case ISP116x wouldn't notice that the other PTDs were for the same
5690 endpoint and would try the other PTDs possibly out of order. That would
5691 break the whole transfer.
5693 This patch makes isp116x_submit_job to use one PTD for one transfer.
5698 commit 86ec86c04326c3913178a7679aa910de071da75d
5700 Date: Thu Sep 27 23:27:47 2007 +0200
5702 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
5706 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
5708 Date: Tue Sep 11 14:12:55 2007 +0200
5710 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
5714 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
5716 Date: Wed Sep 26 16:35:54 2007 -0500
5718 85xx io out functions need sync after write.
5720 This fixes the mc146818 rtc_read/write functions for 85xx.
5724 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
5726 Date: Tue Sep 25 15:48:05 2007 -0600
5728 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
5730 CFG_FPGA_XILINX is a bit value used to test against the value in
5731 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
5732 think that is the intention in this code.
5736 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
5738 Date: Mon Sep 24 00:41:30 2007 +0200
5740 [FIX] change command handling and removing code violation
5742 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
5744 Date: Mon Sep 24 00:36:06 2007 +0200
5746 [FIX] change sets of commands
5747 because changing of command handling brings
5748 compilation problems
5750 commit cb1bc63b75a232571eb69aa2c8aa919321655845
5752 Date: Mon Sep 24 00:30:42 2007 +0200
5754 [FIX] Email reparation & Copyright
5755 Both codes are written by myself without any
5758 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
5760 Date: Mon Sep 24 00:25:11 2007 +0200
5762 [PATCH] Change macro name for UartLite
5763 because PowerPC 405 can use UartLite as console
5765 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
5767 Date: Mon Sep 24 00:21:19 2007 +0200
5769 [PATCH] Add support for design without interrupt controller
5772 commit 0731933ec8ec45d02ba89b52df673d526873cdde
5774 Date: Mon Sep 24 00:19:48 2007 +0200
5776 [FIX] resolve problem with cpu without barrel shifter
5778 commit db14d77995ce515b728b178b63f82babe60e3d56
5780 Date: Mon Sep 24 00:18:46 2007 +0200
5782 [FIX] repair email address
5784 commit 481d4328618804add1f818a6c96296121cd0528e
5786 Date: Mon Sep 24 00:17:42 2007 +0200
5788 [FIX] repair MFSL commands
5790 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
5792 Date: Mon Sep 24 00:08:37 2007 +0200
5794 synchronizition with mainline
5796 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
5798 Date: Sun Sep 23 02:42:38 2007 +0900
5800 sh: Add support command of ide with sh
5804 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
5806 Date: Sun Sep 23 02:38:42 2007 +0900
5810 Add support MS7722SE01 to Makefile.
5814 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
5816 Date: Sun Sep 23 02:31:13 2007 +0900
5818 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
5822 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
5824 Date: Sun Sep 23 02:19:24 2007 +0900
5826 sh: Update MS7750SE01 platform
5830 commit 516ad760db3553766267ada01b7d5d727faa4bbd
5832 Date: Sun Sep 23 02:17:08 2007 +0900
5834 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
5838 commit b02bad128669e567fce87d8df823b06a0144b8db
5840 Date: Sun Sep 23 02:12:30 2007 +0900
5842 sh: Update core code of SuperH.
5846 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
5848 Date: Thu Sep 20 00:04:14 2007 +0200
5854 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
5856 Date: Tue Sep 18 21:36:35 2007 +0200
5858 Avoid compiler warning.
5862 commit 8a783a65851bc7421ab69f442261215e21b8891a
5864 Date: Tue Sep 18 12:24:57 2007 -0600
5866 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
5868 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
5869 nulls in a string differently. For example, the following statement:
5870 echo "this is a string\0" > afile
5871 Will produce the following with /bin/bash:
5872 "this is a string\0"
5873 But with /bin/dash, will produce:
5876 Bug fixed by moving the embedded null out of the makefile and into the
5877 config header. Also renamed the macro to avoid usage colision with the same
5878 macro used by other board ports.
5882 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
5884 Date: Tue Sep 18 17:40:27 2007 +0200
5886 MCC200: fix build warning
5888 The MCC200 board config file includes version.h for some customer-
5889 specific setting, which causes warnings with "make depend"; build
5890 version.h before depend.
5894 commit bd86220f58b99d6896198c385fda132f0c980915
5896 Date: Tue Sep 18 13:07:54 2007 +0100
5898 Move coloured led API to status_led.h
5899 Improve indentation in drivers/at45.c
5901 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
5903 Date: Tue Sep 18 08:47:20 2007 +0200
5905 Update atstk1002 bootargs.
5907 Updates to atstk1002 U-Boot header file:
5909 * Set the bootargs for at1002 to point to the SD-card partition instead
5910 * ... of the boot flash.
5911 * Removing the rootfstype since that argument are not needed.
5916 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
5918 Date: Wed Sep 12 13:32:37 2007 +0200
5920 Add some comments to clocks in atstk1002.h
5922 This patch applies some clarifying comments to how the different
5923 clocks are setup according to atstk1002.h Some of the previous
5924 comments where stating wrongful information.
5928 commit 97213f32416ead885deafea86774e912ffd60ad0
5930 Date: Mon Sep 17 17:04:47 2007 +0200
5932 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
5936 commit 30363e98fa470fbecea5e8bc0f1443352754f303
5938 Date: Mon Sep 17 08:20:47 2007 +0200
5940 Small whitespace cleanup of OneNAND patch
5944 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
5946 Date: Mon Sep 10 17:15:14 2007 +0900
5948 OneNAND support (take #2)
5950 [PATCH 3/3] OneNAND support (take #2)
5952 OneNAND support at U-Boot
5956 commit 17aa2800457df0c06b41516f46f126712c196219
5958 Date: Mon Sep 10 17:14:34 2007 +0900
5960 OneNAND support (take #2)
5962 [PATCH 2/3] OneNAND support (take #2)
5964 OneNAND support at U-Boot
5968 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
5970 Date: Mon Sep 10 17:13:49 2007 +0900
5972 OneNAND support (take #2)
5974 [PATCH 1/3] OneNAND support (take #2)
5976 OneNAND support at U-Boot
5980 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
5982 Date: Sun Sep 16 20:51:57 2007 +0200
5984 [FIX] remove files form repository
5986 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
5988 Date: Sun Sep 16 17:10:04 2007 +0200
5990 TQM8xx[LM]: Fix broken environment alignment.
5992 With recent toolchains, the environment sectors were no longer aligned to
5993 sector boundaries. The reason was a combination of two bugs:
5995 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
5996 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
5997 this gets defined, is not included here (and cannot be included
5998 without causing lots of problems).
6000 Added a new #define CFG_USE_PPCENV for all boards which really
6001 want to put the environment is a ".ppcenv" section.
6003 2) The linker scripts just include environment.o, silently assuming
6004 that the objects in that file are really in the order in which
6005 they are coded in the C file, i. e. "environment" first, then
6006 "redundand_environment", and "env_size" last. However, current
6007 toolchains (GCC-4.x) reorder the objects, causing the environment
6008 data not to start on a flash sector boundary:
6012 40008000 T environment 40008000 T env_size
6013 4000c000 T redundand_environment 40008004 T redundand_environment
6014 40010000 T env_size 4000c004 T environment
6016 Note: this patch fixes just the first part, and cures the alignment
6017 problem by making sure that "env_size" gets placed correctly. However,
6018 we still have a potential issue because primary and redundant
6019 environment sectors are actually swapped, i. e. we have now:
6021 40008000 T redundand_environment
6022 4000c000 T environment
6025 This shall be fixed in the next version.
6029 commit eb6da8050797c204c9d010548424186c7ce32fc1
6031 Date: Sun Sep 16 02:39:35 2007 +0200
6033 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
6037 commit cd2d1602c54cc6957bdef3872272a4b264893960
6039 Date: Mon Sep 10 14:54:56 2007 -0400
6043 Fixup for the break statement in wrong place.
6049 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
6051 Date: Tue Sep 11 17:04:00 2007 +0200
6053 Fix do_div() usage in nand process output
6055 Fix usage of do_div() in nand erase|read|write process output.
6057 The last patch to nand_util.c introduced do_div() instead of libgcc's
6058 implementation. But do_div() returns the quotient in its first
6059 macro parameter and not as result.
6063 commit c750d2e6692a000a82f29de7bf24e3dc21239161
6065 Date: Wed Sep 12 12:36:53 2007 +0200
6067 NAND: Add CFG_NAND_QUIET option
6069 This config option sets the default for the progress information
6070 output behavior that can also be configured through the 'quiet'
6071 environment variable.
6073 The legacy NAND code does not print the current progress info
6074 on the console. So this option is for backward compatibility for
6075 units that are in the field and where setting the quiet variable
6076 is not an option. With CFG_NAND_QUIET set to '1' the console
6077 progress info is turned off. This can still be overwritten
6078 through the environment variable.
6082 commit dcb88630290d2bcd803386dd4c2be73142994c4f
6084 Date: Thu Sep 13 16:06:05 2007 -0700
6086 ColdFire: fix build error becasue of bad type of mii_init()
6090 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
6092 Date: Thu Sep 13 16:04:05 2007 -0700
6094 ColdFire: Fix build error caused by pixis.c
6096 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
6100 commit e21659e30660a1377c42af135a6114efe39801d9
6102 Date: Fri Sep 14 11:14:42 2007 -0600
6104 Update MPC8349ITX*_config to place config.tmp in right place.
6106 MPC834ITX*_config does not store config.tmp at the correct locatation,
6107 causing MPC8349ITXGP to have the wrong TEXT_BASE.
6112 commit 1218abf1b5817a39a82399b4b928b00750575bda
6114 Date: Sat Sep 15 20:48:41 2007 +0200
6116 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
6120 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
6122 Date: Sat Sep 15 11:55:42 2007 +0200
6124 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
6126 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
6131 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
6133 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
6135 Date: Sat Sep 15 00:03:35 2007 +0200
6137 Synchronize with U-BOOT mainline
6139 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
6141 Date: Fri Sep 14 11:14:42 2007 -0600
6143 Update MPC8349ITX*_config to place config.tmp in right place.
6145 MPC834ITX*_config does not store config.tmp at the correct locatation,
6146 causing MPC8349ITXGP to have the wrong TEXT_BASE.
6152 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
6154 Date: Thu Sep 13 18:21:48 2007 +0200
6156 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
6160 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
6162 Date: Thu Sep 13 16:33:59 2007 +0200
6164 tqm5200: Restore customary env. variable boot commands for powerpc kernels
6166 - update default definitions of kernel_addr and fdt_addr env. variables
6167 - make arch/powerpc booting the default scenario
6168 - update MTD partition layout to match the above
6172 commit f34024d4a328e6edd906456da98d2c537155c4f7
6174 Date: Wed Sep 12 00:48:57 2007 +0200
6176 Fix memory corruption problem on STX GP3 SSA Board.
6180 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
6182 Date: Tue Sep 11 15:35:01 2007 +0100
6186 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
6188 Date: Tue Sep 11 15:42:11 2007 +0200
6190 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
6191 scan on second pci bus.
6195 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
6197 Date: Tue Sep 11 12:57:52 2007 +0200
6199 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
6201 Bamboo has a file sdram.c which needs special treatment when building in
6202 separate directory. It has to be linked to build directory otherwise it is
6207 commit d45963854eff39d575124d859419bb4953ce2c87
6209 Date: Tue Sep 11 00:37:04 2007 +0200
6211 [FIX] Microblaze ML401 - repare FLASH handling
6213 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
6215 Date: Mon Sep 10 16:55:59 2007 +0100
6217 Allocate CPU Architecture Code for STMicroelectronics' ST200.
6220 ---------------------------------------------------
6222 commit 754bac48156f8958d8f6a53a51eda88ab5758929
6224 Date: Mon Sep 10 20:42:31 2007 +0200
6226 Update version to match current state.
6230 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
6232 Date: Mon Sep 10 17:39:08 2007 +0200
6234 [MPC512x] Streamline frame handling in the FEC driver
6236 - convert frame size settings to be derived from a single base
6237 - set frame size to the recommended default value
6241 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
6243 Date: Mon Sep 10 11:34:00 2007 +0900
6245 Remove compiler warning: target CPU does not support interworking
6249 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
6251 Date: Sun Sep 9 21:21:33 2007 +0200
6253 Fix compile error in spc1920 config.
6258 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
6260 Date: Fri Sep 7 09:25:07 2007 -0600
6262 Bugfix: make bootm+libfdt compile on boards with no flash
6266 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
6268 Date: Fri Sep 7 18:35:37 2007 +0200
6270 [PPC440SPe] PCIe environment settings for Katmai and Yucca
6272 - 'pciconfighost' is set by default in order to be able to scan bridges
6273 behind the primary host/PCIe
6275 - 'pciscandelay' env variable is recognized to allow for user-controlled
6276 delay before the PCIe bus enumeration; some peripheral devices require a
6277 significant delay before they can be scanned (e.g. LSI8408E); without the
6278 delay they are not detected
6282 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
6284 Date: Fri Sep 7 18:20:23 2007 +0200
6286 [PPC440SPe] Improve PCIe configuration space access
6288 - correct configuration space mapping
6289 - correct bus numbering
6290 - better access to config space
6292 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
6293 first device on the first bus. We now allow to configure up to 16 buses;
6294 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
6295 peripheral devices farther in hierarchy can be identified.
6299 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
6301 Date: Fri Sep 7 17:46:18 2007 +0200
6303 [PPC440SPe] Convert machine check exceptions handling
6305 Convert using fixup mechanism to suppressing MCK for the duration of config
6306 read/write transaction: while fixups work fine with the case of a precise
6307 exception, we identified a major drawback with this approach when there's
6308 an imprecise case. In this scenario there is the following race condition:
6309 the fixup is (by design) set to catch the instruction following the one
6310 actually causing the exception; if an interrupt (e.g. decrementer) happens
6311 between those two instructions, the ISR code is executed before the fixup
6312 handler the machine check is no longer protected by the fixup handler as it
6313 appears as within the ISR code. In consequence the fixup approach is being
6314 phased out and replaced with explicit suppressing of MCK during a PCIe
6315 config read/write cycle.
6319 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
6321 Date: Fri Sep 7 17:43:36 2007 +0200
6323 Fix typo in MAKEALL script.
6327 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
6329 Date: Fri Sep 7 17:09:21 2007 +0200
6331 [MPC512x] Proper handling of larger frames in the FEC driver
6333 When frame larger than local RX buffer is received, it is split and handled
6334 by two buffer descriptors. Prior to this patch the FEC driver discarded
6335 contents of a buffer descriptor without the 'LAST' bit set, so the first
6336 part of the frame was lost in case of larger frames. This fix allows to
6337 safely combine the two pieces into the whole frame.
6341 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
6343 Date: Fri Sep 7 17:05:36 2007 +0200
6345 [MPC512x] Correct fixup relocation
6349 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
6351 Date: Fri Sep 7 01:21:25 2007 +0200
6353 Update CHANGELOG, minor coding style cleanup.
6355 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
6357 Date: Thu Aug 30 23:01:49 2007 +0200
6359 PXA270: Added support for TrizepsIV board.
6361 This patch add support for the Trizeps IV module (520Mhz).
6365 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
6367 Date: Thu Aug 30 22:57:04 2007 +0200
6369 PXA270: Add support for multiple serial ports.
6371 This patch adds support for multiple serial ports to the PXA target.
6372 FFUART, BTUART and STUART are supported.
6376 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
6378 Date: Thu Aug 30 22:48:47 2007 +0200
6380 PXA270: fix compile issue (invalid lvalue)
6382 Code is broken for PXA270 due to "invalid lvalue in assignment".
6384 This patch fix it in pxa-regs.h
6388 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
6390 Date: Thu Aug 30 18:19:05 2007 +0800
6392 Add BUILD_DIR support for bios emulator.
6396 commit b4d8a55145442f136982634862341a3e02002bda
6398 Date: Fri Aug 31 14:41:51 2007 +0900
6400 [MIPS] Remove inline asm string functions
6402 Stop using inline string functions on MIPS as other ARCHs do so,
6403 since the optimized inline asm versions are not small.
6405 This change is triggered by a following MIPS build error:
6406 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
6407 common/exports.c:32: undefined reference to `strcmp'
6408 make: *** [u-boot] Error 1
6412 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
6414 Date: Fri Aug 31 14:41:45 2007 +0900
6416 [MIPS] Update asm string header
6418 This patches contains several bugfixes and cleanups in the latest upstream:
6420 - Don't include linux/config.h
6421 - Remove buggy inline version of memscan.
6422 - Merge with Linux 2.6.11-rc3.
6423 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
6424 - Goodbye mips64. 31704 lines of code bite the dust.
6425 - Replace extern inline with static inline.
6426 - Fix return value of strncpy.
6427 - Remove a bunch more "$1" clobbers.
6431 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
6433 Date: Tue Sep 4 17:31:22 2007 +0200
6435 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
6437 Fix incorrect blob address calculation in do_bootm_linux() that prevents
6438 booting the kernel from a multi-file image (kernel + initrd + blob).
6440 Also, make minor updates to the U-Boot's output and to the coding style.
6444 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
6446 Date: Fri Aug 31 14:29:04 2007 +0200
6448 Add support for Sil680 IDE controller.
6450 o add drivers/sil680.c to support the Sil680 IDE-controller.
6451 o drivers/Makefile: add sil680.o.
6455 commit e79021223bc339df655e360645a52c457a74b067
6457 Date: Thu Sep 6 09:47:40 2007 -0600
6459 bootm/fdt: Only process the fdt if an fdt address was provided
6461 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
6462 kernels using the board info structure (instead of passing a device tree)
6463 This change allows the old style booting to be used if the fdt argument
6464 was not passed to 'bootm'.
6469 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
6471 Date: Thu Sep 6 09:46:23 2007 -0600
6473 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
6475 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
6477 Tested on: lite5200b
6479 Note: the fixup functions have not been moved to a common place. This
6480 patch is targeted for immediate merging as in solves a build issue, but
6481 the final name/location of the fixups is still subject to debate. I
6482 propose to merge this now, and move the fixups in the next merge window
6483 to be usable by all targets.
6487 commit 41bb76e941929f54a73206fb132f7a4c275543a3
6489 Date: Thu Sep 6 09:46:17 2007 -0600
6491 libfdt: add convenience function fdt_find_and_setprop()
6493 Given the path to a node, fdt_find_and_setprop() allows a property value
6498 commit 80767a6cead9990d9e77e62be947843c2c72f469
6500 Date: Wed Sep 5 16:04:41 2007 +0100
6502 Changed API name to coloured_led.h
6503 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
6504 Tidied other cpu/arm920t/start.S code
6506 commit 56a9270521baaa00e12639a978302a67f61ef060
6508 Date: Thu Aug 30 16:18:18 2007 -0500
6510 Fix ULI RTC support on MPC8544 DS
6512 The RTC on the M1575 ULI chipset requires a dummy read before
6513 we are able to talk to the RTC. We accomplish this by adding a
6514 second memory region to the PHB the ULI is on and read from it.
6516 The second region is added to maintain compatiabilty with Linux's
6517 view of the PCI memory map.
6521 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
6523 Date: Thu Aug 30 01:58:48 2007 -0500
6525 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
6527 pcie is now differentiated from pci. Add 8641 bus-range updates.
6531 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
6533 Date: Tue Sep 4 16:18:38 2007 +0100
6535 Add coloured led interface for ARM boards.
6536 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
6538 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
6540 Date: Tue Sep 4 14:49:28 2007 +0100
6542 Move include/led.h to board/at91rm9200dk
6544 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
6546 Date: Tue Sep 4 14:25:51 2007 +0100
6548 Ran Lindent on drivers/at45.c
6550 commit 557ab89d294f08dd532f21d19861b40093200a33
6552 Date: Tue Sep 4 14:23:50 2007 +0100
6554 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
6556 commit 81b73dec16fd1227369a191e725e10044a9d56b8
6558 Date: Fri Aug 31 15:21:46 2007 +0200
6560 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
6562 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
6563 set to non-zero, because it doesn't support MRM (memory-read-
6564 multiple) correctly. We now added the possibility to configure
6565 this register in the board config file, so that the default value
6566 of 8 can be overridden.
6568 Here the details of this patch:
6570 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
6571 board-specific settings. As an example the sequoia board requires 0.
6573 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
6575 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
6576 CFG_PCI_CACHE_LINE_SIZE to 0.
6581 commit 60174746c668b309378a91488dded898e9553eae
6583 Date: Fri Aug 31 10:01:51 2007 +0200
6585 Fix TFTP OACK code for short packets.
6587 The old code had a loop limit overflow bug which caused a semi-
6588 infinite loop for small packets, because in "i<len-8", "i" was signed,
6589 but "len" was unsigned, and "len-8" became a huge number for small
6592 This is a workaround which replaces broken commit 8f1bc284.
6596 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
6598 Date: Thu Aug 30 15:03:05 2007 +0200
6600 Reduce BOOTDELAY variable to 1 second by default for STK1002
6605 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
6607 Date: Thu Aug 30 15:03:04 2007 +0200
6609 Remove double quotation marks around MAC address for STK1002
6614 commit ff13ac8c7bbebb238e339592de765c546dba1073
6616 Date: Thu Aug 30 14:42:15 2007 +0200
6618 Backout commit 8f1bc284 as it causes TFTP to fail.
6622 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
6624 Date: Thu Aug 30 02:26:17 2007 -0500
6626 Revert "Fix MPC8544DS PCIe3 scsi."
6628 This reverts commit 9468e680.
6629 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
6633 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
6635 Date: Wed Aug 29 18:26:24 2007 -0600
6637 tftp: don't implicity trust the format of recevied packets
6639 The TFTP OACK code trusts that the incoming packet is formated as
6640 ASCII text and can be processed by string functions. It also has a
6641 loop limit overflow bug where if the packet length is less than 8, it
6642 ends up looping over *all* of memory to find the 'blksize' string.
6644 This patch solves the problem by forcing the packet to be null
6645 terminated and using strstr() to search for the sub string.
6649 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
6651 Date: Wed Aug 29 16:31:18 2007 +0200
6653 ppc4xx: Change lwmon5 default environment to support Linux RTC
6655 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
6656 to supply the RTC I2C address as bootline parameter. This patch
6657 adds support for this rtc probing parameter to the bootargs:
6659 "rtc-pcf8563.probe=0,0x51"
6663 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
6665 Date: Wed Aug 29 09:06:05 2007 -0500
6667 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
6669 this had slipped through the cracks, since the sbc board was added
6670 after I wrote the original patch to remove all these symbols, and
6671 before it was merged.
6675 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
6677 Date: Wed Aug 29 14:05:30 2007 +0200
6679 Add mii_init() prototype
6681 to get rid of a *lot* of compiler warnings.
6685 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
6687 Date: Wed Aug 29 13:35:03 2007 +0200
6689 Disable network support on cmi_mpc5xx board
6691 ..because it caused compiler errors and there seems to be no
6692 board maintainer to take care of this.
6696 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
6698 Date: Mon Aug 20 09:44:00 2007 -0500
6700 Fix MPC8544DS PCIe3 scsi.
6704 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
6705 is allocating memory space it doesn't need.
6710 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
6712 Date: Tue Aug 21 09:38:59 2007 -0500
6716 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
6717 correct consoledev needed for linux boot.
6718 Standardize on fdt{file,addr} var to hold dtb file name.
6720 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
6724 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
6726 Date: Thu Aug 23 15:20:54 2007 -0400
6728 Enable L2 cache for MPC8568MDS board
6730 The L2 cache size is 512KB for 8568, print out the correct informaiton.
6734 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
6736 Date: Wed Aug 22 17:54:49 2007 +0800
6738 Remove the bios emulator binary files from MAI board
6742 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
6744 Date: Tue Aug 21 17:00:17 2007 -0500
6746 support board vendor-common makefiles
6748 if a board/$(VENDOR)/common/Makefile exists, build it.
6750 also add the first such case, board/freescale/common/Makefile, to
6751 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
6752 dictated by board configuration.
6754 thusly get rid of alternate build dir errors such as:
6756 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
6758 by putting the common/ mkdir command in its proper place (the common
6759 Makefile). Common bits from existing individual board Makefiles have
6764 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
6766 Date: Tue Aug 21 15:52:33 2007 +0200
6768 Fix: TFTP is not working on little endian systems
6770 TFTP does not work anymore after multicast tftp
6771 patch was applied on little endian systems.
6776 commit 5f470948570526e9186f053a3003da7719604e90
6778 Date: Tue Aug 21 15:50:33 2007 +0200
6780 Fix MAC address setting in DM9000 driver.
6782 The logic to check if there is a correct MAC address in the DM9000
6783 EEPROM, added in the last patch, is wrong. Now the MAC address is
6784 always taken from the environment, even if a suitable MAC is present
6789 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
6791 Date: Tue Aug 21 12:40:34 2007 +0200
6793 MPC5xxx: fix some compiler warnings in USB code
6795 Fix the following warnings:
6796 - usb.c:xx: warning: function declaration isn't a prototype
6797 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
6798 from pointer wihtout a cast
6802 commit 16e23c3f5dab6937f5109365416808c7f15c122b
6804 Date: Mon Aug 20 23:55:33 2007 -0500
6806 fsl_pci_init - Remove self PCSRBAR allocation
6808 CPU physical address space was being wasted by allocating a
6809 PCSRBAR PCI inbound region to it's memory space.
6811 As a rule, PCSRBAR should be left alone since it does not affect
6812 transactions from self and other masters may have changed it.
6816 commit 0e700ce03a23bb1921149bc77008ace7103d5289
6818 Date: Mon Aug 20 13:56:47 2007 +0200
6820 Fix compiler warning in include/s3c2410.h
6822 This patch fixes the "type qualifiers ignored on fuction return tpye"
6823 warning for include/s3c2410.h
6827 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
6829 Date: Mon Aug 20 07:09:05 2007 +0200
6831 Fix compilation error for omap2420h4_config.
6833 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
6834 and flash_probe() calls in env_flash.c.
6838 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
6840 Date: Fri Aug 10 14:34:14 2007 -0500
6842 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
6844 and make some minor corrections to the FDT part of the README.
6848 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
6850 Date: Wed Aug 29 01:32:05 2007 +0200
6852 Minor coding style cleanup.
6856 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
6858 Date: Tue Aug 28 17:40:33 2007 +0200
6860 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
6864 commit f98984cb194bb34dbe1db9429d3b51133af30d07
6866 Date: Tue Aug 28 17:39:14 2007 +0200
6868 IDE: - make ide_inb () and ide_outb () "weak", so boards can
6869 define there own I/O functions.
6870 (Needed for the pcs440ep board).
6871 - The default I/O Functions are again 8 Bit accesses.
6872 - Added CONFIG_CMD_IDE for the pcs440ep Board.
6876 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
6878 Date: Mon Aug 20 19:00:01 2007 +0300
6880 AVR32: Change prototype of memset
6885 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
6887 Date: Sat Aug 25 05:07:16 2007 +0200
6889 POST: limit memory test area to not touch global data anymore
6891 As experienced on lwmon5, on some boards the POST memory test can
6892 corrupt the global data buffer (bd). This patch fixes this issue
6893 by checking and limiting this area.
6898 commit 75e1a84d483e36be10e206e539b028c4889e1158
6900 Date: Fri Aug 24 15:41:42 2007 +0200
6902 ppc4xx: Add RTC POST test to lwmon5 board configuration
6904 Since this RTC POST test is taking quite a while to complete
6905 it's only initiated upon special keypress same as the complete
6910 commit d7bfa620037a6d2210159387571bdf93aa32c162
6912 Date: Fri Aug 24 15:19:10 2007 +0200
6914 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
6918 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
6920 Date: Thu Aug 23 11:02:37 2007 +0200
6922 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
6924 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
6925 board. Now the "eeprom" command can be used to read/write from/to this
6926 device. Additionally a new command was added "eepromwp" to en-/disable
6927 the write-protect of this 2nd EEPROM.
6929 The 1st EEPROM is not affected by this write-protect command.
6933 commit c64fb30e4c5976007d56fc1789c7a0666082b536
6935 Date: Wed Aug 22 08:56:09 2007 +0200
6937 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
6941 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
6943 Date: Tue Aug 21 16:27:57 2007 +0200
6945 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
6947 This patch adds support for the matrix keyboard on the lwmon5 board.
6948 Since the implementation in the dsPCI is kind of compatible with the
6949 "old" lwmon board, most of the code is copied from the lwmon
6954 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
6956 Date: Sun Aug 19 10:27:34 2007 +0200
6958 Fix some build errors.
6962 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
6964 Date: Sat Aug 18 22:00:38 2007 +0200
6968 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
6970 Date: Thu Aug 16 22:52:39 2007 -0500
6972 lib_ppc: make board_add_ram_info weak
6974 platforms wishing to display RAM diagnostics in addition to size,
6975 can do so, on one line, in their own board_add_ram_info()
6978 this consequently eliminates CONFIG_ADD_RAM_INFO.
6980 Thanks to Stefan for the hint.
6984 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
6986 Date: Fri Aug 17 12:43:44 2007 +0900
6988 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
6990 This patch has been sent on:
6993 Many users of PCI config read routines tend to ignore the function
6994 ret value, and are only concerned about the contents of *val. Based
6995 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
6996 the *val on dword read error.
6998 Without this fix, for example, we'll go on scanning bus with vendor or
6999 header_type uninitialized. This brings many unnecessary config trials.
7003 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
7005 Date: Sat Aug 18 14:37:52 2007 +0200
7007 ColdFire: Fix some remaining problems with CFG_CMD_
7011 commit 8280f6a1c43247616b68224675188e5ccd124650
7013 Date: Sat Aug 18 14:33:02 2007 +0200
7015 Coding style cleanup
7019 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
7021 Date: Thu Aug 16 19:23:50 2007 -0500
7023 ColdFire: Add M5235EVB Platform for MCF523x
7027 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
7029 Date: Fri Aug 17 09:30:00 2007 -0500
7031 mpc83xx: fix typo in DDR2 programming
7033 introduced in the implement board_add_ram_info patch as I was cleaning out the
7034 magic numbers. sorry.
7038 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
7040 Date: Thu Aug 16 22:53:09 2007 -0500
7042 mpc83xx: move freescale boards to boards/freescale
7044 includes build fixes.
7048 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
7050 Date: Thu Aug 16 22:52:59 2007 -0500
7052 mpc83xx: suppress unused variable 'val8' warning
7056 commit bbea46f76f767b919070b4829bf34c86bd223248
7058 Date: Thu Aug 16 22:52:48 2007 -0500
7060 mpc83xx: implement board_add_ram_info
7062 add board_add_ram_info, to make memory diagnostic output more
7063 consistent. u-boot banner output now looks like:
7065 DRAM: 256 MB (DDR1, 64-bit, ECC on)
7067 and for boards with SDRAM on the local bus, a line such as this is
7070 SDRAM: 64 MB (local bus)
7072 also replaced some magic numbers with their equivalent define names.
7076 commit 14778585d1389d86d5846efec29e5fce892680ce
7078 Date: Fri Aug 17 10:35:59 2007 +0800
7080 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
7082 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
7083 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
7087 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
7089 Date: Thu Aug 16 15:05:11 2007 -0500
7091 ColdFire: Add M54455EVB for MCF5445x
7095 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
7097 Date: Thu Aug 16 13:20:50 2007 -0500
7099 ColdFire: Add M5253EVBE platform for MCF52x2
7103 commit a605aacd8324094199402816cc6d9124aba57b8d
7105 Date: Thu Aug 16 05:04:31 2007 -0500
7107 ColdFire: Add M5249EVB platform for MCF52x2
7111 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
7113 Date: Wed Aug 15 20:32:06 2007 -0500
7115 ColdFire: Update Freescale MCF52x2 platforms
7119 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
7121 Date: Wed Aug 15 19:55:10 2007 -0500
7123 ColdFire: Update EB+MCF-EV123 platform
7127 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
7129 Date: Wed Aug 15 19:46:38 2007 -0500
7131 ColdFire: update TASREG platform for MCF52x2
7135 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
7137 Date: Wed Aug 15 19:45:51 2007 -0500
7139 ColdFire: update r5200 platform for MCF52x2
7143 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
7145 Date: Wed Aug 15 19:43:20 2007 -0500
7147 ColdFire: idmr platform MCF52x2 update
7151 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
7153 Date: Wed Aug 15 19:41:06 2007 -0500
7155 ColdFire: cobra5272 platform for MCF52x2 update
7159 commit 56115665b4a64c10c01440c57749b265e0908fa4
7161 Date: Wed Aug 15 19:38:15 2007 -0500
7163 ColdFire: MCF52x2 Header files update
7167 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
7169 Date: Wed Aug 15 19:21:21 2007 -0500
7171 ColdFire: MCF52x2 update
7175 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
7177 Date: Wed Aug 15 18:46:11 2007 -0500
7179 ColdFire: MCF5329 update cache
7183 commit 7171977fb8fd77cfb6676953fa9a05789c450513
7185 Date: Wed Aug 15 15:40:20 2007 -0500
7187 ColdFire: MCF5329 header file clean up
7191 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
7193 Date: Wed Aug 15 15:39:17 2007 -0500
7195 ColdFire: MCF5329 Update and cleanup
7199 commit 10327dc5541f947c0cf7e31fef86c4706169607a
7201 Date: Thu Aug 16 16:35:02 2007 -0500
7203 Add CONFIG_HAS_ETH0 to all boards with TSEC
7205 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
7206 to update TSEC1's device-tree node, so we need to add it
7207 to all the boards with TSECs. Do this for 83xx and 86xx, too,
7208 since they will eventually do something similar.
7212 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
7214 Date: Thu Aug 16 15:05:04 2007 -0500
7216 Update MPC8544 DS PCI memory map
7218 The PCIe bus that the ULI M1575 is connected to has no possible way of
7219 needing more than the fixed amount of IO & Memory space needed by the ULI.
7221 So make it use far less IO & memory space and have it use the shared LAW. This
7222 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
7227 commit ea5877e31ed63ade948fd1293895ec23fe01472e
7229 Date: Thu Aug 16 11:01:21 2007 -0500
7231 Fix up some fdt issues on 8544DS
7233 It looks like we had a merge issue that duplicated a bit of code
7234 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
7235 the MAC address properly set in the device tree on boot for TSEC1
7239 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
7241 Date: Thu Aug 16 15:16:03 2007 +0200
7243 PPC4xx:HCU4/5 cleanup
7245 Minor cleanups to confirm to the u-boot coding style.
7246 Some german expressions -> english.
7247 HCU5 enforces a unique IP adress for a given slot in the rack.
7251 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
7253 Date: Thu Aug 16 15:16:02 2007 +0200
7255 PPC4xx:HCU4/5 cleanup ecc/sdram init
7257 Make ecc initialisation robust, as DDR2-ECC errors may be generated
7258 while zeroing the RAM.
7260 Return 16 bytes (a cacheline) less than the available memory, as the
7261 board and/or PPC440EPx might have problems accessing the last bytes.
7265 commit d35b508a55508535b6e8445b718585d27df733d3
7267 Date: Wed Aug 15 22:29:56 2007 -0500
7269 fdt: suppress unused variable 'bd' warning
7273 commit 82bd9ee77490588d4da785d75829ca63d0176baf
7275 Date: Wed Aug 15 20:06:50 2007 -0500
7277 Fix warnings from of_data copy fix
7279 Forgot to cast of_flat_tree to ulong.
7283 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
7285 Date: Wed Aug 15 20:03:44 2007 -0500
7287 Don't wait for disconnected TSECs
7289 The TSEC driver's PHY code waits a long time for autonegotiation to
7290 complete, even if the link is down. The PHY knows the link is
7291 down or up before autonegotiation completes, so we can short-circuit
7292 the process if the link is down.
7296 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
7298 Date: Wed Aug 15 20:03:34 2007 -0500
7300 Fix numerous bugs in the 8568 UEC support
7302 Actually, fixed a large bug in the UEC for *all* platforms.
7303 How did this ever work?
7305 uec_init() did not follow the spec for eth_init(), and returned
7306 0 on success. Switch it to return the link like tsec_init()
7309 The immap for the 8568 was defined based on MPC8568, rather than
7314 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
7316 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
7321 commit 3a79013e2adda53332dfd0b511066a805e929a9d
7323 Date: Wed Aug 15 20:03:25 2007 -0500
7325 Define tsec flag values in config files
7327 The tsec_info structure and array has a "flags" field for each
7328 ethernet controller. This field is the only reason there are
7329 settings. Switch to defining TSECn_FLAGS for each controller
7330 in the config header, and we can greatly simplify the array, and
7331 also simplify the addition of future boards.
7335 commit ec7238229507e7f47533a611ea8c53319d234cf3
7337 Date: Wed Aug 15 20:03:13 2007 -0500
7339 Add support for building all boards with a TSEC
7341 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
7342 Now we can do a MAKEALL test on all of them!
7346 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
7348 Date: Wed Aug 15 17:30:56 2007 -0500
7350 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
7352 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
7353 neglected to *also* put the code inside the similar #ifdef
7354 for CONFIG_OF_FLAT_TREE.
7358 commit 78f9fef7f406078c8bf7191e665a73f795157746
7360 Date: Wed Aug 15 15:46:46 2007 -0500
7362 mpc885ads: Don't define CONFIG_BZIP2.
7364 bzip2 requires a significant chunk of malloc space, and there isn't
7365 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
7366 and a downloaded image at 0x400000.
7370 commit 002275a3ed8b114885f6702d6d544d0780dfe689
7372 Date: Thu Aug 16 08:54:10 2007 +0200
7374 Bios emulator - fix microblaze toolchain problem
7376 microblaze CPU have problem with bios_emulator code.
7377 Microblaze toolchain doesn't support PRAGMA PACK.
7381 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
7383 Date: Thu Aug 16 11:51:04 2007 +0200
7385 Minor Coding Style fix; Update CHANGELOG file.
7389 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
7391 Date: Thu Aug 16 11:21:49 2007 +0200
7393 ppc4xx: Remove #warning in esd auto_update.c
7397 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
7399 Date: Fri Jun 22 17:32:28 2007 +0200
7401 ppc7xx: Update CPCI750 board
7403 This small CPCI750 update extends the board specific command
7404 "show_config" to display the Marvell strapping registers and
7405 extends the PCI IDE controller.
7410 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
7412 Date: Thu Aug 16 10:46:28 2007 +0200
7414 [FIX] Changes for bios_emulator code for others architecture
7416 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
7418 Date: Thu Aug 16 10:45:09 2007 +0200
7420 [FIX] Remove unused include file
7422 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
7424 Date: Thu Aug 16 10:18:33 2007 +0200
7426 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
7430 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
7432 Date: Thu Aug 16 09:54:51 2007 +0200
7434 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
7438 commit 02ba7022f62bb75908296c58c63866e1d294b69a
7440 Date: Thu Aug 16 09:52:29 2007 +0200
7442 ppc4xx: Update Sequoia/Rainier bootstrap command
7444 As suggested by David Mitchell, here an update for the Sequoia/Rainier
7449 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
7451 Date: Wed Aug 15 22:30:39 2007 -0500
7453 mpc83xx: enable libfdt by default on freescale boards
7455 this enables libfdt code by default for the
7456 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
7457 mpc8349itx and gp boards.
7461 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
7463 Date: Wed Aug 15 22:30:33 2007 -0500
7465 mpc83xx: migrate remaining freescale boards to libfdt
7467 this adds libfdt support code for the freescale
7468 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
7471 Boards remain compatible with OF_FLAT_TREE.
7475 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
7477 Date: Wed Aug 15 22:30:26 2007 -0500
7479 mpc83xx: move common /memory node update mechanism to cpu.c
7481 also adds common prototypes to include/common.h.
7485 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
7487 Date: Wed Aug 15 22:30:19 2007 -0500
7489 mpc83xx: remaining 8360 libfdt fixes
7491 PCI clocks and QE frequencies weren't being updated, and the core clock
7492 was being updated incorrectly. This patch also adds a /memory node if
7493 it doesn't already exist prior to update.
7495 plus some cosmetic trimming to single line comments.
7499 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
7501 Date: Wed Aug 15 22:30:12 2007 -0500
7503 mpc83xx: fix UEC2->1 typo in libfdt setup code
7507 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
7509 Date: Wed Aug 15 22:30:05 2007 -0500
7511 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
7513 and reorder the existing 83xx maintainers alpha.
7517 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
7519 Date: Wed Aug 15 21:15:05 2007 +0200
7521 [FIX] Resolve problem with warnings
7522 microblaze toolchain don't support PRAGMA PACK.
7524 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
7526 Date: Wed Aug 15 21:05:07 2007 +0200
7528 [FIX] Correction command setting for Microblaze boards
7530 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
7532 Date: Wed Aug 15 21:03:41 2007 +0200
7534 [FIX] Correction command definition
7536 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
7538 Date: Wed Aug 15 11:55:35 2007 -0500
7540 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
7542 Remove a leftover in net/tftp.c while we're at it.
7546 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
7548 Date: Wed Aug 15 12:20:40 2007 -0500
7550 Move the MPC8641HPCN board under board/freescale.
7552 Minor path corrections needed to ensure buildability.
7556 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
7558 Date: Wed Aug 15 11:46:22 2007 -0500
7560 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
7562 Remove a leftover in net/tftp.c while we're at it.
7566 commit 210f463c71917b7a4495c2103c228b9c179ae64d
7568 Date: Wed Aug 15 11:13:15 2007 -0400
7570 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
7572 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
7573 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
7574 when it should have gone inside of the conditional. As a result, it
7575 broke non-LIBFDT board builds.
7577 Also added a missing "not." to the comment.
7581 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
7583 Date: Wed Aug 15 12:14:23 2007 +0200
7585 PPC4xx:HCU4/5-Board fix compile warning
7589 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
7591 Date: Tue Aug 14 14:06:45 2007 -0500
7593 Fix malloc size error in ahci_init_one.
7595 Typically this causes scsi init to corrupt the
7596 devlist and break the coninfo command.
7597 Fix a compiler size warning.
7603 commit b361acd64fd2525c081b9b288b0804efe209c0e9
7605 Date: Tue Aug 14 10:02:16 2007 -0700
7607 TI DaVinci - fix unsupported %hhx format
7611 commit f01dbb5424a81453c81190dd30e945891466f621
7613 Date: Tue Aug 14 18:42:36 2007 +0200
7615 Coding style cleanup. Update CHANGELOG.
7619 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
7621 Date: Tue Aug 14 10:32:59 2007 -0500
7623 Fix initrd/dtb interaction
7625 The original code would wrongly relocate the blob to be right before
7626 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
7627 if it is defined. So we make two changes:
7629 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
7631 2) If the blob is being relocated, relocate it before kbd, not initrd
7635 commit e54b970173769307a116bd34028b6d0c2eea2a4e
7637 Date: Tue Aug 14 15:40:00 2007 +0100
7639 Supply spi interface in at45.c
7641 commit 4ce846ec59f36b85d6644a769690ad3feb667575
7643 Date: Tue Aug 14 15:12:01 2007 +0200
7645 POST: Fix merge problem
7649 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
7651 Date: Tue Aug 14 15:03:17 2007 +0200
7653 Coding style cleanup
7657 commit 779e975117a75e91fcebe226a63104dbfb924ab1
7659 Date: Tue Aug 14 14:44:41 2007 +0200
7661 ppc4xx: Add initial Zeus (PPC405EP) board support
7665 commit c5a172a5fd636c12467429e3f7910e53773979c6
7667 Date: Tue Aug 14 14:41:55 2007 +0200
7669 POST: Add option for external ethernet loopback test
7671 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
7672 is not done using an internal loopback connection, but by assuming
7673 that an external loopback connector is plugged into the board.
7677 commit eb2b4010ae426245172988804ee8d9193fb41038
7679 Date: Tue Aug 14 14:39:44 2007 +0200
7681 POST: Add ppc405 support to cache and UART POST
7685 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
7687 Date: Tue Aug 14 10:46:32 2007 +0100
7689 Replace lost end of at45.c.
7691 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
7693 Date: Tue Aug 14 10:30:06 2007 +0100
7695 Update Makefiles for merged and split at45.c.
7697 commit 3454cece2db57cb9eb7087995f7e73066a163f71
7699 Date: Tue Aug 14 10:21:06 2007 +0100
7701 Delete the merged files.
7703 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
7705 Date: Tue Aug 14 10:14:05 2007 +0100
7709 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
7711 Date: Tue Aug 14 10:10:52 2007 +0100
7713 Add MACH_TYPE records for several AT91 boards.
7714 Merge to two at45.c files into a common file, split to at45.c and spi.c
7715 Fix spelling error in DM9161 PHY Support.
7716 Initialize at91rm9200 board (and set LED).
7717 Add PIO control for at91rm9200dk LEDs and Mux.
7718 Change dataflash partition boundaries to be compatible with Linux 2.6.
7723 commit 4ef35e53c693556c54b0c22d6f873de87bade253
7725 Date: Tue Aug 14 09:54:46 2007 +0200
7727 Coding style cleanup, update CHANGELOG
7731 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
7733 Date: Tue Aug 14 09:47:27 2007 +0200
7735 Coding style cleanup; rebuild CHANGELOG
7737 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
7738 Author: Randy Vinson <rvinson@linuxbox.(none)>
7739 Date: Tue Feb 27 19:42:22 2007 -0700
7741 85xxCDS: Add make targets for legacy systems.
7743 The PCI ID select values on the Arcadia main board differ depending
7744 on the version of the hardware. The standard configuration supports
7745 Rev 3.1. The legacy target supports Rev 2.x.
7749 commit e41094c7e38177c755fbd9b182018069614f080d
7751 Date: Tue Aug 14 01:50:09 2007 -0500
7753 85xxCDS: Enable the VIA PCI-to-ISA bridge.
7755 Author: Randy Vinson <rvinson@linuxbox.(none)>
7757 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
7763 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
7765 Date: Tue Aug 14 00:14:25 2007 -0500
7767 Add support for UEC to 8568
7772 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
7774 Date: Tue Jun 19 14:18:34 2007 -0400
7776 Add PCI support for MPC8568MDS board
7778 This patch is against u-boot-mpc85xx.git of www.denx.com
7783 commit d111d6382c99fdea08c2312eeeae8786945e189a
7785 Date: Tue Jun 19 14:18:32 2007 -0400
7787 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
7789 This patch is against u-boot-mpc85xx.git of www.denx.com
7791 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
7792 both MPC8548CDS board and MPC8568MDS board, especially for supporting
7795 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
7796 DDR2 on all current board versions especially ver 1.92 or later to bring
7801 commit 3db0bef59eab1155801618cef5c481e97553b597
7803 Date: Tue Aug 7 18:07:27 2007 -0500
7805 Use an absolute address when jumping out of 4k boot page
7807 On e500 when we leave the 4k boot page we should use an absolute address since
7808 we don't know where the board code may want us to be really running at.
7812 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
7814 Date: Mon Aug 13 14:49:59 2007 -0500
7816 MPC85xx BA bits not set for 3-bit bank address DIMM
7818 The current implementation does not set the number of bank address bits
7819 (BA) in the processor. The default assumes 2 logical bank bits. This
7820 works fine for a DIMM that uses devices with 4 internal banks (SPD
7821 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
7822 devices with 8 internal banks (SPD byte17 = 0x8).
7826 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
7828 Date: Mon Aug 13 14:38:06 2007 -0500
7830 Fix minor 85xx warnings
7832 Some patches had inserted warnings into the build:
7833 * mpc8560ads declared data without using it
7834 * cpu_init declared ecm and immap without using it in all CONFIGs
7835 * MPC8548CDS.h had its default filenames changed so that they contained
7836 "\m" in the paths. Made the defaults not Windows-specific (or
7841 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
7843 Date: Fri Jul 27 01:50:52 2007 -0500
7845 8548cds PCIE support.
7847 Make the early L1 cache stack region guarded to prevent speculative
7848 fetches outside the locked range.
7850 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
7851 init.S whitespace cleanup.
7853 Allow TEXT_BASE value to be specified on command line. This allows it
7854 to be set to 0xfffc0000 which cuts the uboot binary in half.
7856 Clear and enable lbc and ecm errors.
7858 Update last_busno in device-tree for pci and pcie.
7860 Remove load of obsolete cpu/mpc85xx/pci.0
7865 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
7867 Date: Fri Jul 27 01:50:51 2007 -0500
7871 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
7873 Enable LBC and ECM errors and clear error registers.
7875 Add tftpflash env var to get uboot from tftp server and flash it.
7877 Add pci/pcie convenience env vars to display register space:
7878 "run pcie3regs" to see all pcie3 ccsr registers
7879 "run pcie3cfg" to see all cfg registers
7880 Whitespace cleanup and MPC8544DS.h
7882 Enable CONFIG_INTERRUPTS.
7887 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
7889 Date: Tue Aug 14 01:34:21 2007 -0500
7891 85xx start.S cleanup and exception support
7895 Support external interrupts from platform to eliminate system hangs.
7896 Define CONFIG_INTERRUPTS board configure option to enable.
7897 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
7899 Remove extra cpu initialization redundant with hardware initialization.
7902 Define and use _START_OFFSET consistent with other processors using
7905 Move additional code from .text to boot page to make room for
7906 exception vectors at start of image.
7908 Handle Machine Check, External and Critical exceptions.
7910 Fix e500 machine check error determination in traps.c
7912 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
7917 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
7919 Date: Tue Aug 14 01:33:18 2007 -0500
7921 Add MPC8544DS README
7925 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
7927 Date: Fri Jul 27 01:50:48 2007 -0500
7929 85xx allow debugger to configure ddr.
7931 Only check for mpc8548 rev 1 when compiled for 8548.
7936 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
7938 Date: Fri Jul 27 01:50:47 2007 -0500
7940 mpc85xx L2 cache reporting and SRAM relocation option.
7942 Allow debugger to override flash cs0/cs1 settings to enable alternate
7948 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
7950 Date: Fri Jul 27 01:50:46 2007 -0500
7952 e500 needs ppc_asm.tmp MCK_EXCEPTION
7954 Always define MCK_EXCEPTION macro - so e500 can use it too.
7959 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
7961 Date: Mon Jun 11 10:41:07 2007 -0500
7963 multicast tftp: RFC2090
7965 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
7966 on Realtek RTL8139 and Freescale TSEC.
7971 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
7973 Date: Sat Jul 28 10:56:13 2007 -0400
7975 New CONFIG_BOOTP_SERVERIP option
7977 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
7978 from the bootp server
7983 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
7985 Date: Sun Aug 12 08:48:27 2007 +0300
7987 Add ability to take MAC address from the environment to DM9000 driver
7992 commit be5d72d10d47609326226225181e301fb9a33b58
7994 Date: Mon Aug 13 21:57:53 2007 +0200
7996 Minor coding style cleanup. Update CHANGELOG.
8000 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
8002 Date: Sat Aug 11 06:54:58 2007 -0500
8004 Modify SBC8641D to use new Freescale PCI routines
8006 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
8012 commit a08458303e7f9db67f296980036d3292c35cb45c
8014 Date: Fri Jun 29 18:38:51 2007 +0200
8016 atmel_mci: Fix data timeout value
8018 Calculate the data timeout based on values from the CSD instead of
8019 just using a hardcoded DTOR value. This is a backport of a similar fix
8020 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
8025 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
8027 Date: Mon Aug 13 17:22:31 2007 +0200
8029 AVR32: Include <div64.h> instead of <asm/div64.h>
8031 include/asm-avr32/div64.h was recently moved to include/div64.h, but
8032 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
8033 the patch was merged perhaps?)
8035 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
8040 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
8042 Date: Wed Jun 27 13:34:26 2007 +0200
8044 atmel_mci: Use 512 byte blocksize if possible
8046 Instead of always using the largest blocksize the card supports, check
8047 if it can support smaller block sizes and use 512 bytes if possible.
8048 Most cards do support this, and other parts of u-boot seem to have
8049 trouble with block sizes different from 512 bytes.
8051 Also enable underrun/overrun protection.
8056 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
8058 Date: Mon Aug 13 09:05:33 2007 +0200
8060 ppc4xx: Fix problem in PLL clock calculation
8063 and fixes a bug in the PLL clock calculation.
8067 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
8069 Date: Sun Aug 12 21:34:50 2007 +0200
8073 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
8075 Date: Sun Aug 12 21:34:34 2007 +0200
8077 Minor alignment of output, 2nd try.
8078 Also update CHANGELOG
8082 commit 6b309f22a724fad8418e811751a0741b893419cf
8084 Date: Sun Aug 12 20:35:49 2007 +0200
8086 Minor alignment of output
8090 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
8092 Date: Sun Aug 12 18:28:18 2007 +0200
8094 Cleanup output on ADS5121 board
8096 Signed-off-by: Wolfgang Denk
8098 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
8100 Date: Sun Aug 12 15:11:38 2007 +0200
8102 Adapt board configuration and fix kernel crash on MCC200 board.
8104 The update procedure was modified to turn off the USB subsystem
8105 before exit for MCC200 and TRAB. This is necessary as otherwise the
8106 USB controller continues to write periodically to system memory!
8108 MCC200-specific notes:
8109 - the patch disables the magic key check for MCC200
8110 - the patch contains the configuration changes made
8111 for the new revision of the board.
8116 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
8118 Date: Sun Aug 12 14:47:54 2007 +0200
8120 Adjust default configuration of ADS5121 board.
8124 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
8126 Date: Sun Aug 12 14:27:39 2007 +0200
8128 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
8132 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
8134 Date: Tue Aug 7 21:14:22 2007 -0400
8136 Improve error print messages.
8140 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
8142 Date: Tue Jul 17 13:57:04 2007 -0500
8144 fdt: allow for builds that don't want env and bd_t nodes
8146 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
8151 commit 91148bf7aeba142d6f348805db7625db7da64d6f
8153 Date: Tue Jul 17 13:56:53 2007 -0500
8155 fdt: do board setup based on fdt address specified on bootm line
8157 The last fdt patch to bootm did board setup based on the address
8158 specified by a prior fdt address command invocation. The bootm
8159 code, as its call to fdt_chosen does, should use the fdt specified
8160 by the user on the bootm command. Note this restores full
8161 functionality for the 8360's existing default boot environment
8162 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
8163 before booting a kernel).
8167 commit e125a2ffc209dd34794e326c7175658253beadf3
8169 Date: Tue Jul 10 20:40:39 2007 -0400
8171 Call ft_board_setup() from the bootm command.
8173 In the patch titled "Create new fdt boardsetup command..." I removed the
8174 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
8175 to add a direct call back into cmd_bootm.c
8177 This fixes the oversight by adding the direct call to the bootm command.
8181 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
8183 Date: Mon Jun 25 23:25:28 2007 -0400
8185 Create new fdt boardsetup command, fix bug parsing [] form of set values.
8187 Previously ft_board_setup() was called by fdt_chosen() which was not
8188 really correctly structured. This splits ft_board_setup() out by creating
8189 a new fdt boardsetup command.
8191 Fix a bug when parsing fdt set command values which have the square
8192 bracket form [00 11 22 33] - the length was updated incorrectly in when
8197 commit 6f35ded9e85493595e0eb66a82b502a95326d049
8199 Date: Mon Jun 25 20:55:58 2007 -0400
8201 Tighten up the error messages.
8205 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
8207 Date: Mon Jun 25 19:52:23 2007 -0400
8209 Asthetic improvements: error messages and line lengths.
8211 Tighten up the error messages, split overlength lines.
8215 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
8217 Date: Fri May 25 22:08:57 2007 -0400
8219 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
8221 The fdt_chosen() function was adding/seting some properties ad-hoc
8222 improperly and duplicated (poorly) what was done in ft_board_setup()
8224 Clean up long lines (setting properties, printing errors).
8228 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
8230 Date: Mon May 21 23:27:16 2007 -0400
8232 For fdt_find_node_by_path(), handle the root path properly.
8234 Also removes the special case root path detection in cmd_fdt.c since it
8235 is no longer necessary.
8239 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
8241 Date: Thu May 17 23:54:36 2007 -0400
8243 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
8248 commit 1a861169bc3758f9de3aead62b058736c6891246
8250 Date: Wed Jun 6 22:47:58 2007 -0400
8252 Replace fdt_node_offset() with fdt_find_node_by_path().
8254 The new name matches more closely the kernel's name, which is also
8255 a much better description.
8260 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
8262 Date: Wed May 16 22:39:59 2007 -0400
8264 Fix cmd_fdt line lengths, refactor code.
8266 Break lines that were greater than 80 characters in length.
8267 Move the fdt print and property parsing code to separate static functions
8268 to reduce coding clutter in the fdt_cmd handling body.
8272 commit 25114033ab21788810c48ba4df103b649da1223b
8274 Date: Sat May 12 09:47:25 2007 -0400
8276 FDT command improvements.
8278 Fix "fdt set" so that it will create a non-existing property.
8279 Add "fdt mknode" to create nodes.
8283 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
8285 Date: Sat May 12 09:45:46 2007 -0400
8287 Reorganize and fix problems (returns) in the bootm command.
8289 Do *NOT* return after the "point of no return" has been passed.
8290 If something goes wrong, the board must be reset after that point.
8291 Move the "Transferring control to Linux" debug message back to where it
8292 belongs: just before transferring control to linux.
8296 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
8298 Date: Tue May 8 21:27:35 2007 -0400
8300 Fix bugs in the CONFIG_OF_LIBFDT
8302 Stupid coding mistakes (identified by Timur Tabi, thanks).
8306 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
8308 Date: Wed Apr 25 22:47:15 2007 -0400
8310 Improve fdt move length handling.
8312 Make the length parameter optional: if not specified, do the move using
8313 the current size unchanged.
8317 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
8319 Date: Wed Apr 25 22:23:36 2007 -0400
8321 Minor code clean up.
8323 Declare the variable fdt properly as extern.
8324 Call the "set_fn" function pointer the "short way" without the full
8325 dereferencing syntax.
8329 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
8331 Date: Wed Apr 25 21:24:27 2007 -0400
8333 Improve error messages, more informative.
8335 Print more than the raw libfdt error message strings. This is especially
8336 useful for cluing in the user when the bootm command aborts due to
8341 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
8343 Date: Fri Apr 20 22:46:53 2007 -0400
8345 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
8347 This is the way u-boot reduces configured-out code. At Wolfgang
8348 Grandegger and Wolfgang Denk's request, make libfdt conform.
8352 commit 923efd286411ed052d9e074f59f8986d6081061c
8354 Date: Fri Aug 10 14:54:47 2007 -0700
8356 add image size and descriptors for Spartan 3E FPGA chips
8358 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
8362 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
8364 Date: Fri Aug 10 15:34:48 2007 -0500
8366 make MAKEALL more immune to merge conflicts
8368 ..by placing board entries one per line, as suggested by jdl.
8372 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
8374 Date: Fri Aug 10 13:28:25 2007 -0500
8376 README: Remove outdated cpu type, board type, and NAME_config lists
8380 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
8382 Date: Fri Aug 10 15:48:59 2007 +0800
8384 mpc83xx: Suppress the warning 'burstlen'
8386 suppress the warning 'burstlen' of spd_sdram.
8390 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
8392 Date: Thu Aug 9 15:11:03 2007 -0500
8394 Add support for SBC8641D. Config files.
8396 Add support for Wind River's SBC8641D reference board.
8402 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
8404 Date: Thu Aug 9 15:10:53 2007 -0500
8406 Add support for SBC8641D. Board files.
8408 Add support for Wind River's SBC8641D reference board.
8414 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
8416 Date: Fri Aug 10 20:34:58 2007 +0200
8418 Conding style cleanup
8422 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
8424 Date: Fri Aug 10 20:26:18 2007 +0200
8426 [ARM] TI DaVinci support, hopefully final
8428 Add support for the following DaVinci boards:
8435 - Split into separate board directories
8436 - Removed changes to MTD_DEBUG (or whatever it's called)
8437 - New CONFIG_CMD party line followed
8438 - Some cosmetic fixes, cleanup etc.
8439 - Patches against the latest U-Boot tree as of now.
8440 - Fixed CONFIG_CMD_NET in net files.
8441 - Fixed CONFIG_CMD_EEPROM for schmoogie.
8442 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
8443 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
8444 but it at least compiles.
8446 Here is an excerpt from session log on SCHMOOGIE...
8448 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
8457 ETH PHY : DP83848 @ 0x01
8459 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
8460 U-Boot > ping 192.168.253.10
8461 host 192.168.253.10 is alive
8469 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
8471 Date: Fri Jul 27 01:50:45 2007 -0500
8473 fsl_pci_init cleanup.
8475 Do not enable normal errors created during probe (master abort, perr,
8476 and pcie Invalid Configuration access).
8478 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
8483 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
8485 Date: Fri Jul 27 01:50:44 2007 -0500
8487 pciauto_setup_device bars_num fix
8489 Passing bars_num=0 to pciauto_setup_device should assign no bars.
8495 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
8497 Date: Mon Aug 6 17:39:44 2007 -0500
8499 8641hpcn: Do correct sized pointer math.
8501 When I rebased Ed's patch and cleaned up a few compilation
8502 problems, I apparently rebased my brain on crack first.
8503 Fix that by doing (char *) sized pointer math as needed.
8507 commit cfc7a7f5bb3273c9951173c788001d45118f141f
8509 Date: Thu Aug 2 14:42:20 2007 -0500
8514 Always set PICGCR_MODE.
8515 Enable machine check and provide board config option
8516 to set and handle SoC error interrupts.
8518 Include MSSSR0 in error message.
8520 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
8525 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
8527 Date: Fri Aug 10 10:42:25 2007 +0200
8529 Coding style cleanup
8533 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
8535 Date: Thu Aug 2 17:42:08 2007 +0200
8537 Make use of generic 64bit division in nand_util.c
8539 Use generic 64bit division in nand_util.c. This makes nand_util.c
8540 independent of any toolchain 64bit division.
8544 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
8546 Date: Thu Aug 2 17:41:14 2007 +0200
8548 Move 64bit division from avr32 to generic lib
8550 Move the 64bit division from lib_avr32 to lib_generic. With this, all
8551 boards can do_div/__div64_32 if needed, not only avr one. Code is put
8552 to lib_generic, so no larger memory footprint if not used. No code
8553 modifications. Thanks for proposal by Håvard Skinnemoen.
8557 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
8559 Date: Fri Jul 27 11:31:22 2007 +0200
8561 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
8565 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
8567 Date: Fri Jul 27 11:30:33 2007 +0200
8569 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
8573 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
8575 Date: Fri Jul 27 11:38:26 2007 +0200
8577 Add PPC4xx-HCU4 and HCU5 boards: common files
8581 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
8583 Date: Fri Jul 27 11:28:44 2007 +0200
8585 Add PPC4xx-HCU4 and HCU5 boards: make related
8589 commit 137fdd9f474ecb853efdace5200576308c67f18d
8591 Date: Fri Jul 27 11:28:03 2007 +0200
8593 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
8597 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
8599 Date: Fri Jul 27 11:27:15 2007 +0200
8601 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
8605 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
8607 Date: Fri Jul 27 11:25:31 2007 +0200
8609 Add PPC4xx-HCU4 and HCU5 boards: READMEs
8613 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
8615 Date: Fri Jul 27 11:37:40 2007 +0200
8617 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
8619 This series of patches adds support for 2 boards from Netstal Maschinen.
8621 The HCU4 has a PPC405Gpr and
8622 the HCU5 has a PPC440EPX.
8624 The HCU4 has a somehow complicated flash setup, as the booteprom is
8625 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
8628 The HCU5 has only a booteprom as the whole code will be downloaded from a
8629 different board which has HD, CD-ROM, etc and where all code is stored.
8631 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
8636 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
8638 Date: Fri Aug 10 08:42:55 2007 +0200
8640 ppc4xx: Update lwmon5 POST configuration
8644 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
8646 Date: Fri Aug 10 08:25:22 2007 +0200
8648 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
8650 The patch adds support for UART POST on ppc44x-based boards with no
8651 external serial clocks installed.
8656 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
8658 Date: Mon Aug 6 18:18:34 2007 -0500
8660 mpc83xx: fix ITX[GP] O=builddir builds
8662 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
8664 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
8665 "BUILD_DIR=<some dir> ./MAKEALL ..."
8669 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
8671 Date: Wed Aug 1 15:00:59 2007 +0800
8673 mpc83xx: Correct the README for DDR ECC
8675 Update the README for DDR ECC, change the name
8676 to README.mpc83xx.ddrecc.
8681 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
8683 Date: Wed Aug 1 15:00:15 2007 +0800
8685 mpc83xx: Consolidate the ECC support of 83xx
8687 Remove the duplicated source code of ecc command on the <board>.c,
8688 for reused, move these code to cpu/mpc83xx directory.
8693 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
8695 Date: Sat Aug 4 13:37:39 2007 +0800
8697 mpc83xx: Correct the burst length for DDR2 with 32 bits
8699 The burst length should be 4 for DDR2 with 32 bits bus
8703 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
8705 Date: Wed Jul 25 19:25:33 2007 -0500
8707 mpc83xx: add support for the MPC8323E RDB
8709 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
8710 five 10/100 ethernet ports connected via an ICPlus IP175C
8711 switch, one PCI slot, and serial. Features not supported
8712 in this patch are SD card interface, 2 USB ports, and the
8718 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
8720 Date: Wed Jul 25 19:25:28 2007 -0500
8722 mpc83xx: fixup generic pci for libfdt
8724 add libfdt support to the generic 83xx pci code
8728 commit f57ac7a7b37109245b69db80839ebee26179966a
8730 Date: Wed Jul 25 19:25:22 2007 -0500
8732 mpc83xx: fix 8360 and cpu functions to update fdt being passed
8734 ..and not the global fdt. Rename local fdt vars to blob so as not to
8735 be confused with the global var with the same three-letter name.
8739 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
8741 Date: Wed Jul 4 21:34:24 2007 -0400
8743 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
8745 Several node strings were not correct (trailing slashes and properties
8747 Added setting of the timebase-frequency.
8748 Improved error messages and use debug() instead of printf().
8753 commit 26d02c9bbac1751c5e19294f000100b48d43a920
8755 Date: Wed Jul 4 21:27:30 2007 -0400
8757 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
8759 The new name matches more closely the kernel's name, which is also
8760 a much better description.
8762 These are the mpc83xx changes made necessary by the function name change.
8768 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
8770 Date: Mon Jun 25 10:41:56 2007 +0800
8772 mpc83xx: Add support for the display of reset status
8774 83xx processor family has many reset sources, such as
8775 power on reset, software hard reset, software soft reset,
8776 JTAG, bus monitor, software watchdog, check stop reset,
8777 external hard reset, external software reset.
8778 sometimes, to figure out the fault of system, we need to
8779 know the cause of reset early before the prompt of
8785 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
8787 Date: Mon Jun 25 10:41:04 2007 +0800
8789 mpc83xx: Fix the align bug of SDMA buffer
8791 According to the latest user manual, the SDMA temporary
8792 buffer base address must be 4KB aligned.
8797 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
8799 Date: Mon Jun 25 13:21:12 2007 +0800
8801 mpc83xx: Revise the MPC8360EMDS readme doc
8803 When the rev2.x silicon mount on the MPC8360EMDS baord,
8804 and if you are using the u-boot version after the commit
8805 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
8806 to make the ethernet interface usable, we have to setup
8807 the jumpers correctly.
8812 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
8814 Date: Tue Jul 3 13:46:32 2007 -0500
8816 FSL I2C driver programs the two I2C busses differently
8818 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
8819 The second I2C bus has its slave address programmed incorrectly and is
8820 missing a 5-us delay.
8825 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
8827 Date: Tue Jul 3 13:04:34 2007 -0500
8829 Update SCCR programming in cpu_init_f() to support all 83xx processors
8831 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
8832 bitfields for all 83xx processors. The code to update some bitfields was
8833 compiled only on some processors. Now, the bitfields are programmed as long
8834 as the corresponding CFG_SCCR option is defined in the board header file.
8835 This means that the board header file should not define any CFG_SCCR macros
8836 for bitfields that don't exist on that processor, otherwise the SCCR will be
8837 programmed incorrectly.
8842 commit 9546266999f0b9b51372636614211b88d90f0f25
8844 Date: Fri Jun 22 13:04:22 2007 +0200
8846 TQM834x: cleanup configuraton
8848 Remove irritating #undef DEBUG
8853 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
8855 Date: Mon Jun 18 09:09:53 2007 -0700
8857 MPC83xx: Fix makefile to generate config.h file in the build directory
8859 MPC83xx: Fix the Makefile config sections to generate the include/config.h
8860 file in the build directory instead of the source directory.
8865 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
8867 Date: Thu Jun 14 20:07:33 2007 -0500
8869 mpc83xx: Add support for 8360 silicon revision 2.1
8871 This change adds 8360 silicon revision 2.1 support to u-boot.
8876 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
8878 Date: Wed Aug 8 04:14:28 2007 -0500
8880 Treat ppc64 host as ppc
8884 commit 0dc4279b08ff82472bec2e2c90858602459febe8
8886 Date: Wed Aug 8 09:01:46 2007 +0800
8888 Minor fix for bios emulator makefile
8890 Add $(obj) to LIB avoiding objects be built in the source dir
8894 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
8896 Date: Wed Aug 8 08:33:11 2007 +0800
8898 Add CONFIG_BIOSEMU define to guard all the bios emulator code
8902 This patch fix the compile issue on the board that did not enable the bios emulator
8904 commit ed8106433522f2ea8933e9808346860d061d7731
8906 Date: Tue Jul 31 12:27:25 2007 -0500
8908 tsec: fix multiple PHY support
8910 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
8911 broke multiple PHY support in tsec.c. This fixes it.
8916 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
8918 Date: Thu Aug 9 09:08:18 2007 -0500
8920 tsec: Allow Ten Bit Interface address to be configurable
8922 Allow the address of the Ten Bit Interface (TBI) to be changed in the
8923 event of a conflict with another device.
8927 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
8929 Date: Wed Aug 8 09:54:26 2007 +0200
8931 Coding style cleanup
8935 commit a41de1f0d373e09c782dea558385a06247111ba5
8937 Date: Sun Aug 5 05:15:18 2007 -0500
8939 Port enabled for I2C signals and chipselects port configuration.
8943 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
8945 Date: Sun Aug 5 04:31:18 2007 -0500
8951 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
8953 Date: Sun Aug 5 04:11:20 2007 -0500
8959 commit 99c03c175d2689093176facf17c58ce2cb320001
8961 Date: Sun Aug 5 03:58:52 2007 -0500
8963 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
8967 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
8969 Date: Sun Aug 5 03:55:21 2007 -0500
8971 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
8975 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
8977 Date: Sun Aug 5 03:43:30 2007 -0500
8979 Moved sync() from board file to include/asm-m68k/io.h
8983 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
8985 Date: Sun Aug 5 03:30:44 2007 -0500
8987 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
8991 commit 9998bd37ead85e93953559720710d3b0685c81e6
8993 Date: Sun Aug 5 03:19:10 2007 -0500
8995 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
8999 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
9001 Date: Tue Aug 7 16:17:06 2007 +0800
9003 Add CONFIG_BIOSEMU define to guard all the bios emulator code
9005 This patch fix the compile issue on the board that did not enable the bios emulator
9007 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
9009 Date: Tue Aug 7 16:02:13 2007 +0200
9011 Fix missing brace error in fs/fat/fat.c
9012 [pointed out by Roderik Wildenburg]
9016 commit 706714d97a0d08d59eda4de2268c39f504688329
9018 Date: Mon Aug 6 23:41:53 2007 +0200
9020 [FIX] remove cute code
9022 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
9024 Date: Mon Aug 6 23:35:26 2007 +0200
9026 [FIX] Fix romfs code
9028 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
9030 Date: Mon Aug 6 23:31:49 2007 +0200
9032 [FIX] Coding style cleanup - Wolfgang's suggestions
9034 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
9036 Date: Mon Aug 6 23:21:05 2007 +0200
9038 Fixed typo in README (pointed out by Martin Jost).
9042 commit 537223afa61f64480df31ce440a9cb386df4a814
9044 Date: Mon Aug 6 21:10:17 2007 +0200
9046 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
9049 here an updated Bamboo README.
9053 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
9055 Date: Mon Aug 6 02:17:36 2007 +0200
9057 Coding style cleanup. Update CHANGELOG.
9061 commit 221838cc7eb178370ff62aa05920a582e12ac322
9063 Date: Tue Jul 10 09:03:22 2007 +0800
9065 Remove the bios emulator from MAI board.
9067 The bios emulator in the MAI board can not pass compile
9068 and have a lot of crap in it. remove it and will have a
9069 clean and small bios emulator in the drivers directory
9070 which can be uesed for every board.
9074 commit 5618332409bb96f4448d1712899369fc80c0b489
9076 Date: Fri Jul 13 12:14:59 2007 +0800
9078 Fix some compile issues for MAI board.
9082 commit 0f460a1ee148b648ee242c3157650287d4296260
9084 Date: Fri Jul 13 12:14:58 2007 +0800
9086 Configurations for ATI video card BIOS emulator
9088 This patch add definition of the BIOS emulator and the ATI framebuffer
9089 driver for MPC8641HPCN board.
9094 commit ece92f85053b8df613edcf05b26a416cbc3d629c
9096 Date: Fri Jul 6 08:34:56 2007 +0800
9098 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
9099 ATI video card BIOS. and can be used for x86 code emulation by some
9104 commit 5072188acabde3178fac7f5a597150e6e74fd40c
9106 Date: Fri Jul 6 08:33:33 2007 +0800
9108 This is a framebuffer driver for ATI video card, can work for PCI9200,
9109 X300, X700, X800 ATI video cards.
9114 commit 5728be389e65fd47f34b33c2596271eb4db751ae
9116 Date: Mon Aug 6 01:01:49 2007 +0200
9118 Coding style cleanup. Update CHANGELOG.
9122 commit 8092fef4c29b395958bb649647da7e3775731517
9124 Date: Tue Dec 12 14:26:01 2006 +0100
9126 Add functions to list of exported functions
9128 Additionally export the following fuctions (to make trab_config build again):
9132 Also bump the ABI version to reflect this change
9136 commit 63cec5814fab5d2b1c86982327433807a5ac0249
9138 Date: Thu Aug 2 14:09:49 2007 -0500
9140 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
9142 All of the PCI/PCI-Express driver and initialization code that
9143 was in the MPC8641HPCN port has now been moved into the common
9144 drivers/fsl_pci_init.c. In a subsequent patch, this will be
9145 utilized by the 85xx ports as well.
9147 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
9149 Also enable the second PCI-Express controller on 8641
9150 by getting its BATS and CFG_ setup right.
9152 Fixed a u16 vendor compiler warning in AHCI driver too.
9158 commit a274ca4f6d68830e7c916f897561cff8c4101c38
9160 Date: Sun Aug 5 22:33:05 2007 +0200
9162 [FIX] Coding style cleanup
9164 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
9166 Date: Sun Aug 5 16:13:31 2007 +0200
9168 [FIX] Xilinx Uartlite driver
9169 Because PPC405 can use UARTLITE serial interface and
9170 Microblaze can use Uart16550 serial interface not only Uartlite.
9172 commit 98889edd50aadf862071eb5664747ad0d568a20e
9174 Date: Sun Aug 5 15:54:53 2007 +0200
9176 [FIX] Change configuration for XUPV2P Microblaze board
9178 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
9180 Date: Sun Aug 5 15:53:50 2007 +0200
9182 [PATCH] Added support for Xilinx Emac community driver
9184 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
9186 Date: Fri Aug 3 12:08:16 2007 +0200
9188 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
9190 Add the ability for modules from the Schindler cm5200 family to use a
9191 single U-Boot image:
9192 - rename cm1_qp1 to cm5200
9193 - add run-time module detection
9194 - parametrize SDRAM configuration according to the module we are running on
9196 Few minor, board-specific fixes included in this patch:
9197 - better MAC address handling
9198 - updated default environment ('update' command uses +{filesize} now)
9199 - improved error messages in the auto-update code
9200 - allow booting U-Boot from RAM (CFG_RAMBOOT)
9206 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
9208 Date: Fri Aug 3 04:05:25 2007 -0500
9210 Add Marvell 1149 PHY support to the TSEC
9212 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
9214 Date: Thu Aug 2 21:27:46 2007 +0200
9216 Coding style cleanup, update CHANGELOG
9220 commit 63e22764d2f8653f68888c667eb65b3996b52680
9222 Date: Thu Aug 2 10:11:18 2007 +0200
9224 Minor cleanup of <board>_nand build rules.
9226 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
9228 Date: Thu Aug 2 08:33:56 2007 +0200
9230 ppc4xx: Code cleanup
9234 commit c92409812206ac67a7fa7aae298539a9c3804a46
9236 Date: Tue Jul 31 18:51:48 2007 +0200
9238 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
9240 During config transactions on the PCIe bus an attempt to scan for a
9241 non-existent device can lead to a machine check exception with certain
9242 peripheral devices. In order to avoid crashing in such scenarios the
9243 instrumented versions of the config cycle read routines are introduced, so
9244 the exceptions fixups framework can gracefully recover.
9249 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
9251 Date: Tue Jul 31 18:19:54 2007 +0200
9253 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
9255 This brings back separate settings for PCIe bus numbers depending on chip
9256 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
9257 commit. 440SPe rev. A does NOT work properly with the same settings as for
9258 the rev. B (no devices are seen on the bus during enumeration).
9262 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
9264 Date: Thu Aug 2 00:48:45 2007 +0200
9266 Fix build errors and warnings / code cleanup.
9270 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
9272 Date: Tue Jul 31 10:24:56 2007 +0200
9274 ppc4xx: Update AMCC Bamboo 440EP support
9276 Changed storage type of cfg_simulate_spd_eeprom to const
9277 Changed storage type of gpio_tab to stack storage
9278 (Cannot access global data declarations in .bss until afer code relocation)
9280 Improved SDRAM tests to catch problems where data is not uniquely addressable
9281 (e.g. incorrectly programmed SDRAM row or columns)
9283 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
9284 Fixed AM29LV320DT (OpCode Flash) sector map
9289 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
9291 Date: Tue Jul 31 08:37:01 2007 +0200
9293 ppc4xx: Update 440EPx lwmon5 board support
9295 - Clear ECC status regs after ECC POST test
9296 - Set dcbz for ECC generation with caches enabled as default
9301 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
9303 Date: Mon Jul 30 11:04:57 2007 +0200
9305 ppc4xx: Only print ECC related info when the error bis are set
9309 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
9311 Date: Fri Jul 27 16:44:31 2007 +0200
9313 new FPGA image for PLU405 board
9315 new FPGA image for PLU405 board with improved CompactFlash timing
9319 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
9321 Date: Fri Jul 27 14:43:59 2007 +0200
9323 [ADS5121] Support for the ADS5121 board
9325 The following MPC5121e subsystems are supported:
9327 - low-level CPU init
9328 - NOR Boot Flash (common CFI driver)
9338 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
9340 Date: Fri Jul 27 14:22:04 2007 +0200
9342 [PPC] Remove unused MSR_USER definition
9346 commit d4024bb72dd81695ec099b2199eda0d27c623e62
9348 Date: Thu Jul 26 17:49:11 2007 +0200
9350 ppc4xx: Add support for AMCC 405EP Taihu board
9354 commit b66091de6c7390620312c2501db23d8391e7cabb
9356 Date: Thu Jul 26 15:08:01 2007 +0200
9358 ppc4xx: lwmon5: Update Lime initialization
9360 Change Lime SDRAM initialization to now support 100MHz and
9361 133MHz (if enabled). Also the framebuffer is initialized to
9362 display a blue rectangle with a white border.
9367 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
9369 Date: Tue Jul 24 09:52:52 2007 +0200
9371 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
9373 The used Intel NOR FLASH chips have internally two dies, and are now
9374 treated as two seperate chips.
9378 commit aedf5bde179ecfbd0a96130d18996a96518b785f
9380 Date: Tue Jul 24 07:20:09 2007 +0200
9382 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
9384 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
9385 interrupt controller.
9389 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
9391 Date: Fri Jul 20 15:03:44 2007 +0200
9393 ppc4xx: Fix bug with default GPIO output value
9395 As spotted by Matthias Fuchs, the default output values for all GPIO1
9396 outputs were not setup correctly. This patch fixes this issue.
9400 commit 531e3e8b831f357056448fa573137d5fb37000fd
9402 Date: Fri Jul 20 15:03:03 2007 +0200
9404 POST: Add ECC POST for the lwmon5 board
9406 This patch adds ECC Post test for the Lwmon5 board based
9407 on PPC440EPx to U-Boot.
9413 commit cc3023b9f95d7ac959a764471a65001062aecf41
9415 Date: Thu Jul 19 17:12:28 2007 +0200
9417 Fix breakage of 8xx boards from recent commit.
9419 This patch fixes the negative consequences for 8xx of the recent
9420 "ppc4xx: Clean up 440 exceptions handling" commit.
9424 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
9426 Date: Mon Jul 16 13:11:12 2007 +0200
9428 Coding style cleanup
9432 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
9434 Date: Mon Jul 16 10:02:12 2007 +0200
9436 ppc4xx: Code cleanup
9440 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
9442 Date: Mon Jul 16 10:01:38 2007 +0200
9444 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
9448 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
9450 Date: Mon Jul 16 10:00:43 2007 +0200
9452 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
9454 The new boardspecific DDR2 controller configuration is used for the Yucca
9455 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
9459 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
9461 Date: Mon Jul 16 09:57:00 2007 +0200
9463 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
9465 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
9466 support non default, boardspecific DDR(2) controller configuration.
9470 commit 5743a9207a370b90f09b20ebd61167c806b937f3
9472 Date: Mon Jul 16 08:53:51 2007 +0200
9474 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
9476 The new function remove_tlb() can be used to remove the TLB's used to
9477 map a specific memory region. This is especially useful for the DDR(2)
9478 setup routines which configure the SDRAM area temporarily as a cached
9479 area (for speedup on auto-calibration and ECC generation) and later
9480 need this area uncached for normal usage.
9484 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
9486 Date: Mon Jul 16 00:31:07 2007 +0200
9488 [PATCH] Support for Xilinx EmacLite controller
9490 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
9492 Date: Sat Jul 14 22:51:02 2007 +0200
9498 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
9500 Date: Sat Jul 14 13:11:28 2007 +0200
9502 [FIX] support for simply measuring time
9504 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
9506 Date: Sat Jul 14 12:41:23 2007 +0200
9508 [FS] Added support for ROMFS
9510 commit 011595307731a7a67a7445d107c279d031e8ab97
9512 Date: Sat Jul 14 01:06:58 2007 +0200
9514 [PCS440EP] - fix compile error, if BUILD_DIR is used
9516 commit 5a2f1098d81ad58b309e5e558d0492643166a799
9518 Date: Sat Jul 14 00:18:48 2007 +0200
9520 [PATCH] Support time without timer
9522 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
9524 Date: Fri Jul 13 21:43:55 2007 +0200
9526 [PATCH] Remove problem with disabled BARREL SHIFTER
9528 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
9530 Date: Fri Jul 13 21:41:44 2007 +0200
9532 [FIX] correct help for rspr
9534 commit fad63407154f46246ce80d53a9c669a44362ac67
9536 Date: Fri Jul 13 09:54:17 2007 +0200
9538 make show_boot_progress () weak.
9542 commit 907902472391b6ca1876ec300687562ecaf459b1
9544 Date: Fri Jul 13 08:26:05 2007 +0200
9546 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
9547 - fix compile error, if BUILD_DIR is used
9551 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
9553 Date: Thu Jul 12 16:32:08 2007 +0200
9555 ppc4xx: Change receive buffer handling in the 4xx emac driver
9557 This change fixes a bug in the receive buffer handling, that
9558 could lead to problems upon high network traffic (broadcasts...).
9562 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
9564 Date: Thu Jul 12 01:45:34 2007 +0200
9566 Update CHANGELOG, minor coding style cleanup.
9570 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
9572 Date: Fri Jun 8 16:41:18 2007 -0500
9574 Remove erroneous errata code from Marvel 88E1111S driver
9576 The Marvel 88E1111S driver for the TSEC was copied from the
9577 88E1101 driver, and included a fix for an erratum which does not
9578 exist on that part. Now it is removed
9582 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
9584 Date: Tue Jun 5 16:38:44 2007 -0500
9588 adds the reset register to 85xx immap
9593 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
9595 Date: Thu May 10 17:50:01 2007 -0500
9597 Polished the 85xx ADS config files
9599 Made the boot commands use device trees by default.
9600 Also moved the ramdisk to 1000000 (I think the previous address
9601 was getting overridden during boot).
9605 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
9607 Date: Wed May 9 11:03:32 2007 -0500
9609 8544ds: Fix Makefile after moving pixis to board/freescale.
9611 The OBJTREE != SRCTREE build scenario was broken.
9617 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
9619 Date: Wed May 9 00:54:20 2007 -0500
9621 tsec: Fix PHY code to match first driver
9623 Jarrold Wen noticed that the generic PHY code always matches
9624 under the current implementation. Change it so the first match
9625 wins, and *only* unknown PHYs trigger the generic driver
9629 commit ccc091aac61a38cd998d575d92f7232e256d6312
9631 Date: Tue May 8 17:27:43 2007 -0500
9633 Add support for CPM device tree configuration to 8560 ADS
9635 * Adds code to modify CPM frequencies
9636 * Cleans up the config file to #define TSEC and (for now) #undef FCC
9637 * Adds the MII command for all 8560 ADS configurations
9638 * Updates config file to provide convenience commands for booting
9644 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
9646 Date: Tue May 8 17:23:02 2007 -0500
9648 Fix Marvell 88e1145 PHY init code
9650 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
9651 where the reset was being done after the errata code instead of
9657 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
9659 Date: Wed Jul 11 14:52:16 2007 -0500
9661 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
9665 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
9667 Date: Wed Jul 11 14:52:08 2007 -0500
9669 pciauto setup bridge
9671 The P2P bridge bus numbers programmed into the device are relative to
9676 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
9678 Date: Wed Jul 11 14:52:01 2007 -0500
9680 Support PCIe extended config registers
9682 FSL PCIe block has extended cfg registers in the 100 and 400 range.
9683 For example, to read the LTSSM register: pci display <busn>.0 404 1
9687 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
9689 Date: Wed Jul 11 14:51:48 2007 -0500
9691 Minor improvements to drivers/pci_auto.c
9693 - Make pciauto_{pre,post}scan_setup_bridge non-static
9694 - Added physical address display in debug messages.
9698 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
9700 Date: Wed Jul 11 14:51:35 2007 -0500
9702 Start pci hose scan from hose->current_busno.
9704 Ensure hose->current_busno is not less than first_busno. This fixes
9705 broken board code which leaves current_busno=0 when first_busno is
9706 greater than 0 for the cases with multiple controllers.
9710 commit 3865b1fb7843a08ad49a6319a36415752276ff48
9712 Date: Wed Jul 11 12:13:53 2007 +0200
9714 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
9718 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
9720 Date: Wed Jul 11 20:11:07 2007 +0200
9722 CM1.QP1: Support for the Schindler CM1.QP1 board.
9727 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
9729 Date: Wed Jul 11 18:39:11 2007 +0200
9731 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
9732 - now the Flash ST M29W040B is supported (not tested)
9733 - fix the "led" command
9734 - fix compile error, if BUILD_DIR is used
9738 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
9740 Date: Sun Jul 8 13:44:27 2007 +0200
9742 Fix malloc problem introduced with the relocation fixup for the PPC platform
9744 The relocation fixup didn't handle the malloc pointer initialization
9745 correctly. This patch fixes this problem. Tested successfully on 4xx.
9746 The relocation fixup patches for 4xx will follow soon.
9750 commit 0dca874db62718e41253659e60f3a1de7eb418ce
9751 Author: TsiChung <tcliew@Goku.(none)>
9752 Date: Tue Jul 10 15:45:43 2007 -0500
9754 Cache update and added CFG_UNIFY_CACHE
9756 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
9758 Signed-off-by: TsiChung <tcliew@Goku.(none)>
9760 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
9762 Date: Thu Jul 5 23:36:16 2007 -0500
9764 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
9766 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
9770 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
9772 Date: Thu Jul 5 23:31:25 2007 -0500
9776 Include immap.h and renamed mcfrtc.h to rtc.h
9780 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
9782 Date: Thu Jul 5 23:29:21 2007 -0500
9784 Add mcffec_initialize()
9786 Added mcffec_initialize() in eth_initialize()
9790 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
9792 Date: Thu Jul 5 23:27:40 2007 -0500
9794 Update header file and clean up
9800 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
9802 Date: Thu Jul 5 23:23:15 2007 -0500
9804 New uart structure and defines
9806 Seperated from mcfuart.h
9810 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
9812 Date: Thu Jul 5 23:22:31 2007 -0500
9814 New timer structure and defines
9816 Seperated from mcftimer.h
9820 commit e04acb2eba4782489417240eff76e20e176aec10
9822 Date: Thu Jul 5 23:21:09 2007 -0500
9824 Rename mcfrtc to rtc
9826 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
9830 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
9832 Date: Thu Jul 5 23:17:36 2007 -0500
9834 Rename mcfserial.c. Update include header
9836 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
9840 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
9842 Date: Thu Jul 5 23:13:58 2007 -0500
9844 Header file update, clean up and cache handling
9846 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
9850 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
9852 Date: Thu Jul 5 23:10:40 2007 -0500
9854 Create interrupts.c and modify Makefile
9856 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
9860 commit ddd104f1ed655eda50c06ba636237a83ed943f34
9862 Date: Thu Jul 5 23:06:55 2007 -0500
9868 commit b9bf3de377b2bae70c983c9b97feae914999e735
9870 Date: Thu Jul 5 23:05:31 2007 -0500
9872 Update header file and some clean up
9874 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
9878 commit 84a015b52ec820a5ae173717d78516de731c89c2
9880 Date: Thu Jul 5 23:03:28 2007 -0500
9882 Update header file and enable icache
9884 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
9888 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
9890 Date: Thu Jul 5 23:01:22 2007 -0500
9892 Update header file and removed interrupt_init()
9894 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
9898 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
9900 Date: Thu Jul 5 22:57:46 2007 -0500
9902 Update for flash.o and mii.o
9904 Removed flash.o and added mii.o
9908 commit c5ded275d839e4ff79f41718d50a835d989f57bc
9910 Date: Thu Jul 5 22:56:19 2007 -0500
9912 MII functions calls.
9916 commit 427c814104560e29bda14955c67703245aaaa5b4
9918 Date: Thu Jul 5 22:54:42 2007 -0500
9920 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
9922 The removed MII routines will be placed in mii.c.
9926 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
9928 Date: Thu Jul 5 22:51:05 2007 -0500
9932 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
9936 commit 2744354a8437b8f78db178e30660215688bff570
9938 Date: Thu Jul 5 22:46:38 2007 -0500
9940 Seperate old structure defines and new structure defines
9942 Removed new uart structure and defines to uart.h
9946 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
9948 Date: Thu Jul 5 22:45:01 2007 -0500
9950 Seperate old structure defines and new structure defines
9952 New timer structure and defines will move to new timer.h
9956 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
9958 Date: Thu Jul 5 22:42:23 2007 -0500
9966 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
9968 Date: Thu Jul 5 22:41:24 2007 -0500
9972 Replaced whitespace with tabs
9976 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
9978 Date: Thu Jul 5 22:39:07 2007 -0500
9980 Create new header file and move peripherals base address from configs file to new header file.
9982 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
9986 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
9988 Date: Thu Jul 5 22:24:58 2007 -0500
9992 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
9996 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
9998 Date: Tue Jul 10 11:19:50 2007 -0500
10000 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
10002 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10003 Those always evaluated TRUE, and thus were always compiled
10004 even when IDE really wasn't defined/wanted.
10008 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
10010 Date: Tue Jul 10 11:13:21 2007 -0500
10012 drivers/: Remove lingering references to CFG_CMD_* symbols.
10014 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10015 Those always evaluated TRUE, and thus were always compiled
10016 even when IDE really wasn't defined/wanted.
10020 commit f40a7f3e3888b42a43674b099e5470022c8c544c
10022 Date: Tue Jul 10 11:07:56 2007 -0500
10024 fs/: Remove lingering references to CFG_CMD_* symbols.
10026 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10027 Those always evaluated TRUE, and thus were always compiled
10028 even when IDE really wasn't defined/wanted.
10032 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
10034 Date: Tue Jul 10 11:05:02 2007 -0500
10036 net/: Remove lingering references to CFG_CMD_* symbols.
10038 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10039 Those always evaluated TRUE, and thus were always compiled
10040 even when IDE really wasn't defined/wanted.
10044 commit 902531788376046da212afd1661cffb62f3daa1c
10046 Date: Tue Jul 10 11:02:44 2007 -0500
10048 common/: Remove lingering references to CFG_CMD_* symbols.
10050 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10051 Those always evaluated TRUE, and thus were always compiled
10052 even when IDE really wasn't defined/wanted.
10056 commit d39b57415838c73fb0a37eca84de3c68ba990586
10058 Date: Tue Jul 10 10:48:22 2007 -0500
10060 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
10062 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10063 Those always evaluated TRUE, and thus were always compiled
10064 even when IDE really wasn't defined/wanted.
10068 commit 77a318545d57aefa844752465b94c7e09a3f26d0
10070 Date: Tue Jul 10 10:39:10 2007 -0500
10072 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
10074 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10075 Those always evaluated TRUE, and thus were always compiled
10076 even when IDE really wasn't defined/wanted.
10080 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
10082 Date: Tue Jul 10 10:27:39 2007 -0500
10084 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
10088 commit 079a136c3588814784561d6e4856970ee82d6e2a
10090 Date: Tue Jul 10 10:12:10 2007 -0500
10092 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
10094 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10095 used to be included but CONFIG_BOOTP_MASK was not defined.
10097 Remove lingering references to CFG_CMD_* symbols.
10101 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
10103 Date: Tue Jul 10 09:38:02 2007 -0500
10105 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
10107 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10108 used to be included but CONFIG_BOOTP_MASK was not defined.
10110 Remove lingering references to CFG_CMD_* symbols.
10114 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
10116 Date: Tue Jul 10 09:29:01 2007 -0500
10118 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
10120 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10121 used to be included but CONFIG_BOOTP_MASK was not defined.
10123 Remove lingering references to CFG_CMD_* symbols.
10127 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
10129 Date: Tue Jul 10 09:22:23 2007 -0500
10131 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
10133 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10134 used to be included but CONFIG_BOOTP_MASK was not defined.
10136 Remove lingering references to CFG_CMD_* symbols.
10140 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
10142 Date: Tue Jul 10 09:10:49 2007 -0500
10144 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
10146 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10147 used to be included but CONFIG_BOOTP_MASK was not defined.
10149 Remove lingering references to CFG_CMD_* symbols.
10153 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
10155 Date: Tue Jul 10 09:02:57 2007 -0500
10157 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
10159 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10160 used to be included but CONFIG_BOOTP_MASK was not defined.
10162 Remove lingering references to CFG_CMD_* symbols.
10166 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
10168 Date: Mon Jul 9 22:08:34 2007 -0500
10170 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
10172 All of the choices for CONFIG_BOOTP_ are now documented in
10173 the README file. You must now individually select exactly
10174 the set that you want using a series of
10175 #define CONFIG_BOOTP_<x>
10176 statements in the board port config files now.
10180 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
10182 Date: Mon Jul 9 21:57:31 2007 -0500
10184 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10188 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
10190 Date: Mon Jul 9 21:48:26 2007 -0500
10192 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10196 commit 37d4bb70586659dedef1658ce1bed071be098aec
10198 Date: Mon Jul 9 21:38:02 2007 -0500
10200 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10204 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
10206 Date: Mon Jul 9 21:31:24 2007 -0500
10208 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10212 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
10214 Date: Mon Jul 9 21:24:19 2007 -0500
10216 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10220 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
10222 Date: Mon Jul 9 21:16:53 2007 -0500
10224 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10228 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
10230 Date: Mon Jul 9 19:12:30 2007 -0500
10232 Retire CONFIG_COMMANDS finally.
10233 Strip old CFG_CMD_* symbols out.
10237 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
10239 Date: Mon Jul 9 19:10:03 2007 -0500
10241 Update README.* to reference new CONFIG_CMD_* names now.
10245 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
10247 Date: Mon Jul 9 19:06:00 2007 -0500
10249 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
10253 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
10255 Date: Mon Jul 9 18:57:22 2007 -0500
10257 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
10261 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
10263 Date: Mon Jul 9 18:45:16 2007 -0500
10265 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
10269 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
10271 Date: Mon Jul 9 18:38:39 2007 -0500
10273 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
10277 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
10279 Date: Mon Jul 9 18:31:28 2007 -0500
10281 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
10285 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
10287 Date: Mon Jul 9 18:24:55 2007 -0500
10289 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
10293 commit fcec2eb93e126400009729328e797f12bc94f1fd
10295 Date: Mon Jul 9 18:19:09 2007 -0500
10297 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
10301 commit a593814f2be0c9cdc3133cd550b167b8a988328f
10303 Date: Mon Jul 9 18:10:50 2007 -0500
10305 rtc/: Remove obsolete references to CONFIG_COMMANDS
10309 commit 67350568f9d46e66c21829f3513b3db0caeb948b
10311 Date: Mon Jul 9 18:05:38 2007 -0500
10313 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
10317 commit 7def6b34f910f08d7ef0a14646da067719237ca2
10319 Date: Mon Jul 9 18:02:11 2007 -0500
10321 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
10325 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
10327 Date: Mon Jul 9 17:56:50 2007 -0500
10329 fs/: Remove obsolete references to CONFIG_COMMANDS
10333 commit c91898bbc505aff3e12a807af88e76da18efb7ee
10335 Date: Mon Jul 9 17:46:09 2007 -0500
10337 tools/: Remove obsolete references to CONFIG_COMMANDS
10341 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
10343 Date: Mon Jul 9 17:45:14 2007 -0500
10345 net/: Remove obsolete references to CONFIG_COMMANDS
10349 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
10351 Date: Mon Jul 9 17:39:42 2007 -0500
10353 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
10357 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
10359 Date: Mon Jul 9 17:30:01 2007 -0500
10361 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
10365 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
10367 Date: Mon Jul 9 17:22:37 2007 -0500
10369 disk/: Remove obsolete references to CONFIG_COMMANDS
10373 commit 639221c76c88215bd55af83ad174fc30d1940f8f
10375 Date: Mon Jul 9 17:15:49 2007 -0500
10377 include/: Remove obsolete references to CONFIG_COMMANDS
10378 Mostly removed from comments here.
10382 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
10384 Date: Tue Jul 10 00:01:28 2007 +0200
10386 Coding style cleanup; update CHANGELOG.
10390 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
10392 Date: Mon Jul 9 11:00:24 2007 +0200
10394 Small coding style cleanup
10398 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
10400 Date: Mon Jul 9 10:10:08 2007 +0200
10402 Migrate esd 405EP boards to new NAND subsystem
10404 Remove unused CFG_NAND_LEGACY define
10406 These boards to not have NAND.
10410 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
10412 Date: Mon Jul 9 10:10:06 2007 +0200
10414 Migrate esd 405EP boards to new NAND subsystem
10416 Migrate esd 405EP boards to new NAND subsystem
10419 -use correct io accessors (in/out_be32())
10423 commit e09f7ab5749c345f924da272bea0521a73af5b11
10425 Date: Mon Jul 9 10:10:04 2007 +0200
10427 Migrate esd 405EP boards to new NAND subsystem
10429 This patch prepares the migration from the legacy NAND driver
10430 to U-Boot's new NAND subsystem for esd boards.
10434 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
10436 Date: Sun Jul 8 18:10:08 2007 -0500
10438 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
10442 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
10444 Date: Sun Jul 8 18:05:39 2007 -0500
10446 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
10450 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
10452 Date: Sun Jul 8 18:02:23 2007 -0500
10454 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
10458 commit baa26db4113679b80970ff447d91cc10217742a6
10460 Date: Sun Jul 8 17:51:39 2007 -0500
10462 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
10466 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
10468 Date: Sun Jul 8 17:02:01 2007 -0500
10470 Clear up confusion over the CMD_POST and POST_DIAG mess.
10472 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
10473 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
10474 Clear this mess up some.
10478 commit b3631487105a57ab7cbadfc26efbaf9676275018
10480 Date: Sun Jul 8 15:45:08 2007 -0500
10482 Remove references to the old cmd_confdefs.h include file.
10486 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
10488 Date: Sun Jul 8 15:42:59 2007 -0500
10490 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
10492 Use new CONFIG_CMD_* in lwmon5.h board config file.
10493 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
10497 commit a5562901661bd428f7e5feb333f796372cb81019
10499 Date: Sun Jul 8 15:31:57 2007 -0500
10501 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
10505 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
10507 Date: Sun Jul 8 15:02:44 2007 -0500
10509 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
10513 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
10515 Date: Sun Jul 8 15:12:40 2007 -0500
10517 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
10521 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
10523 Date: Sun Jul 8 14:55:07 2007 -0500
10525 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
10529 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
10531 Date: Sun Jul 8 14:49:44 2007 -0500
10533 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
10537 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
10539 Date: Sun Jul 8 14:21:43 2007 -0500
10541 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
10545 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
10547 Date: Sun Jul 8 14:14:17 2007 -0500
10549 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
10553 commit 348f258f24253433e4a2302a0bbceb6740a67246
10555 Date: Sun Jul 8 13:46:18 2007 -0500
10557 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
10561 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
10563 Date: Sun Jul 8 10:09:35 2007 -0500
10565 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
10569 commit 60a0876b5106b34220e459c208bbf648073306c0
10571 Date: Sat Jul 7 21:04:26 2007 -0500
10573 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
10577 commit dcaa71562826a2466e894c868d132509dcda8444
10579 Date: Sat Jul 7 20:56:05 2007 -0500
10581 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
10585 commit 3c3227f3c737502311b25b72084573901cbbf17d
10587 Date: Sat Jul 7 20:40:43 2007 -0500
10589 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
10593 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
10595 Date: Thu Jul 5 19:52:35 2007 -0500
10597 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
10601 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
10603 Date: Thu Jul 5 19:32:07 2007 -0500
10605 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
10609 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
10611 Date: Thu Jul 5 19:13:52 2007 -0500
10613 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
10615 Since ADS860.h includes "board/fads/fads.h" with ramifications
10616 on the CONFIG_COMMAND treatment, it too has to be adjusted to
10617 exclude already configured commands in this same commit.
10621 commit 10e038932f22ee80ebd53de312531e70e6590a2f
10623 Date: Fri Jul 6 14:58:39 2007 +0200
10625 [NAND] Bad block skipping for command nboot
10627 The old implementation of command nboot does not support reading the image from
10628 NAND flash with skipping of bad blocks. The patch implements a new version of
10629 the nboot command: by calling nboot.jffs2 from the u-boot command line the
10630 command will load the image from NAND flash with respect to bad blocks (by using
10631 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
10637 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
10639 Date: Fri Jul 6 12:26:51 2007 +0200
10641 ppc4xx: Update lwmon5 default environment
10645 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
10647 Date: Fri Jul 6 11:48:24 2007 +0200
10649 ppc4xx: Update lwmon5 board
10651 Add unlock=yes environment variable to default variables to unlock
10652 the CFI flash by default.
10656 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
10658 Date: Fri Jul 6 09:45:47 2007 +0200
10660 Fix problem with get/setdcr commands introduced by cfg patches
10664 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
10666 Date: Fri Jul 6 02:50:19 2007 +0200
10668 Code cleanup and default config update for STC GP3 SSA board.
10672 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
10674 Date: Thu Jul 5 17:56:27 2007 +0200
10676 Fixing some typos etc. introduced mainly by cfg patches.
10680 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
10682 Date: Thu Jul 5 11:12:16 2007 +0200
10684 Minor coding style cleanup. Update CHANGELOG.
10686 commit dca3b3d6d6396b67e5e84af53452164923c73443
10688 Date: Wed Jul 4 22:33:46 2007 -0500
10690 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
10694 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
10696 Date: Wed Jul 4 22:33:38 2007 -0500
10698 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
10702 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
10704 Date: Wed Jul 4 22:33:30 2007 -0500
10706 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
10710 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
10712 Date: Wed Jul 4 22:33:23 2007 -0500
10714 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
10718 commit 26a34560d56a9df5bc2ae23525d9229736134757
10720 Date: Wed Jul 4 22:33:17 2007 -0500
10722 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
10726 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
10728 Date: Wed Jul 4 22:33:13 2007 -0500
10730 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
10734 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
10736 Date: Wed Jul 4 22:33:07 2007 -0500
10738 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
10742 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
10744 Date: Wed Jul 4 22:33:01 2007 -0500
10746 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
10750 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
10752 Date: Wed Jul 4 22:32:57 2007 -0500
10754 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
10758 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
10760 Date: Wed Jul 4 22:32:51 2007 -0500
10762 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
10766 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
10768 Date: Wed Jul 4 22:32:32 2007 -0500
10770 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
10774 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
10776 Date: Wed Jul 4 22:32:25 2007 -0500
10778 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
10782 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
10784 Date: Wed Jul 4 22:32:19 2007 -0500
10786 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
10790 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
10792 Date: Wed Jul 4 22:32:10 2007 -0500
10794 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
10798 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
10800 Date: Wed Jul 4 22:32:03 2007 -0500
10802 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
10806 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
10808 Date: Wed Jul 4 22:31:56 2007 -0500
10810 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
10814 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
10816 Date: Wed Jul 4 22:31:49 2007 -0500
10818 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
10822 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
10824 Date: Wed Jul 4 22:31:42 2007 -0500
10826 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
10830 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
10832 Date: Wed Jul 4 22:31:35 2007 -0500
10834 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
10838 commit d794cfefead5fc177cf4f41164e80382e9c9484a
10840 Date: Wed Jul 4 22:31:15 2007 -0500
10842 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
10846 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
10848 Date: Wed Jul 4 22:31:07 2007 -0500
10850 include/configs: Use new CONFIG_CMD_* in STx board config files.
10854 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
10856 Date: Wed Jul 4 22:30:58 2007 -0500
10858 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
10862 commit 2694690e285acaa34922f55f4b5ae030da60c55a
10864 Date: Wed Jul 4 22:30:50 2007 -0500
10866 include/configs: Use new CONFIG_CMD_* in TQM board config files.
10870 commit 1cc4c458329765b58e584a19821e796b3c10e976
10872 Date: Wed Jul 4 22:30:28 2007 -0500
10874 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
10878 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
10880 Date: Wed Jul 4 22:30:06 2007 -0500
10882 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
10886 commit b44896215a09c60fa40cae906f7ed207bbc2c492
10888 Date: Thu Jul 5 08:17:37 2007 +0200
10890 Merged POST framework with the current TOT.
10894 commit b24629fa377214d63bb40d1360e354b6d3e4af56
10896 Date: Wed Jun 13 13:23:15 2007 -0500
10898 mpc86xx: Remove old CFG_CMD_* references.
10902 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
10904 Date: Wed Jun 13 13:22:54 2007 -0500
10906 Add MPC8568MDS to MAKEALL 85xx target.
10908 It was missing from the original port submission.
10912 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
10914 Date: Wed Jun 13 13:22:08 2007 -0500
10916 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
10920 commit 56b304ac2091689506088a9ae67f63fd6300cf16
10922 Date: Wed Jun 13 13:21:37 2007 -0500
10924 Fix #if typo in CONFIG_CMD_* changes.
10928 commit f780b83316d9af1f61d71cc88b1917b387b9b995
10930 Date: Wed Jun 27 18:11:38 2007 +0200
10932 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
10936 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
10938 Date: Wed Jul 4 10:06:30 2007 +0200
10940 ppc4xx: Update lwmon5 board
10942 - Add optional ECC generation routine to preserve existing
10943 RAM values. This is needed for the Linux log-buffer support
10944 - Add optional DDR2 setup with CL=4
10945 - GPIO50 not used anymore
10946 - Lime register setup added
10950 commit 6810a34677dbc446334f5e451f1682426dd33b49
10952 Date: Tue Jul 3 00:17:28 2007 -0600
10954 Fix Makefile to use $(MKCONFIG) macro for all board ports
10958 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
10960 Date: Tue Jul 3 00:17:28 2007 -0600
10962 Fix Makefile to use $(MKCONFIG) macro for all board ports
10966 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
10968 Date: Tue Jul 3 00:34:49 2007 -0600
10970 Correct fixup relocation for mpc83xx
10974 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
10976 Date: Tue Jul 3 00:34:44 2007 -0600
10978 Correct fixup relocation for mpc8260
10982 commit f3a52fe05923935db86985daf9438e2f70ac39aa
10984 Date: Tue Jul 3 00:34:39 2007 -0600
10986 Correct fixup relocation for mpc824x
10990 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
10992 Date: Tue Jul 3 00:34:34 2007 -0600
10994 Correct fixup relocation for mpc8220
10998 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
11000 Date: Tue Jul 3 00:34:29 2007 -0600
11002 Correct fixup relocation for MPC5xxx
11006 commit 3649cd99ba815b6601868735765602f00ef3692b
11008 Date: Tue Jul 3 00:34:24 2007 -0600
11010 Correct relocation fixup for mpc5xx
11014 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
11016 Date: Tue Jul 3 00:34:19 2007 -0600
11018 Don't set gd->reloc_off if relocation of .fixup works correctly
11022 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
11024 Date: Tue Jul 3 00:34:14 2007 -0600
11026 Remove obsolete mpc83xx linker scripts
11030 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
11032 Date: Tue Jul 3 00:34:09 2007 -0600
11034 Consolidate mpc8260 linker scripts
11038 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
11040 Date: Tue Jul 3 00:34:04 2007 -0600
11042 Remove obsolete mpc824x linker scripts
11046 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
11048 Date: Tue Jul 3 00:33:59 2007 -0600
11050 Remove obsolete mpc824x linker scripts (3 of 4)
11054 commit a71c084f3ac7fedf144537db2b2da47323068833
11056 Date: Tue Jul 3 00:33:53 2007 -0600
11058 Remove obsolete mpc824x linker scripts (2 of 4)
11062 commit f670a15468d1365241d40022b9408e1004181f5e
11064 Date: Tue Jul 3 00:33:48 2007 -0600
11066 Remove obsolete mpc824x linker scripts (1 of 4)
11070 commit 09555bd45a04c0e54f172528d21bc18896550d28
11072 Date: Tue Jul 3 00:33:43 2007 -0600
11074 Remove obsolete mpc8220 linker scripts
11078 commit 5efb992f046e51225c93d52f80fecbe433abd789
11080 Date: Tue Jul 3 00:33:38 2007 -0600
11082 Remove obsolete mpc5xxx linker scripts (3 of 3)
11086 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
11088 Date: Tue Jul 3 00:33:33 2007 -0600
11090 Remove obsolete mpc5xxx linker scripts (2 of 3)
11094 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
11096 Date: Tue Jul 3 00:33:28 2007 -0600
11098 Remove obsolete mpc5xxx linker scripts (1 of 3)
11102 commit b7d8e05f8675249b5f208aa73babeed384a4519d
11104 Date: Tue Jul 3 00:33:23 2007 -0600
11106 Remove obsolete mpc5xx linker scripts
11110 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
11112 Date: Tue Jul 3 00:33:18 2007 -0600
11114 Consolidate mpc83xx linker scripts
11118 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
11120 Date: Tue Jul 3 00:33:13 2007 -0600
11122 Consolidate mpc8260 linker scripts
11126 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
11128 Date: Tue Jul 3 00:33:08 2007 -0600
11130 Consolidate mpc824x linker scripts
11134 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
11136 Date: Tue Jul 3 00:33:03 2007 -0600
11138 Consolidate mpc8220 linker scripts
11142 commit d181c9a15cd41863fe24840d17848429f27d3c8c
11144 Date: Tue Jul 3 00:32:58 2007 -0600
11146 Consolidate mpc5xxx linker scripts
11150 commit 287ac924adb7291bebe5086652a362a30ab28b13
11152 Date: Tue Jul 3 00:32:53 2007 -0600
11154 Consolidate mpc5xx linker scripts
11158 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
11160 Date: Wed Jul 4 00:43:53 2007 +0200
11162 Fix a few file permission problems.
11166 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
11168 Date: Wed Jul 4 00:38:38 2007 +0200
11170 Minor coding style cleanup. Rebuild CHANGELOG file.
11172 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
11174 Date: Mon Jun 11 19:03:44 2007 -0500
11176 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
11180 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
11182 Date: Mon Jun 11 19:03:39 2007 -0500
11184 README: Rewrite command line config to use CONFIG_CMD_* names.
11188 commit 72a074cec68e5bad60d63206c050974e08afd804
11190 Date: Mon Jun 11 19:03:34 2007 -0500
11192 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11194 This is a compatibility step that allows both the older form
11195 and the new form to co-exist for a while until the older can
11196 be removed entirely.
11198 All transformations are of the form:
11200 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11202 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11206 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
11208 Date: Mon Jun 11 19:03:28 2007 -0500
11210 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11212 This is a compatibility step that allows both the older form
11213 and the new form to co-exist for a while until the older can
11214 be removed entirely.
11216 All transformations are of the form:
11218 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11220 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11224 commit 9107ebe0d352420895ab69b715697bdebc8caf50
11226 Date: Mon Jun 11 19:03:23 2007 -0500
11228 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11230 This is a compatibility step that allows both the older form
11231 and the new form to co-exist for a while until the older can
11232 be removed entirely.
11234 All transformations are of the form:
11236 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11238 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11242 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
11244 Date: Mon Jun 11 19:03:19 2007 -0500
11246 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11248 This is a compatibility step that allows both the older form
11249 and the new form to co-exist for a while until the older can
11250 be removed entirely.
11252 All transformations are of the form:
11254 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11256 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11260 commit 737184114ec9c9e0ab94d6713536126073bd2472
11262 Date: Mon Jun 11 19:03:15 2007 -0500
11264 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11266 This is a compatibility step that allows both the older form
11267 and the new form to co-exist for a while until the older can
11268 be removed entirely.
11270 All transformations are of the form:
11272 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11274 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11278 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
11280 Date: Mon Jun 11 19:03:08 2007 -0500
11282 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11284 This is a compatibility step that allows both the older form
11285 and the new form to co-exist for a while until the older can
11286 be removed entirely.
11288 All transformations are of the form:
11290 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11292 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11296 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
11298 Date: Mon Jun 11 19:03:03 2007 -0500
11300 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11302 This is a compatibility step that allows both the older form
11303 and the new form to co-exist for a while until the older can
11304 be removed entirely.
11306 All transformations are of the form:
11308 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11310 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11314 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
11316 Date: Mon Jun 11 19:02:58 2007 -0500
11318 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11320 This is a compatibility step that allows both the older form
11321 and the new form to co-exist for a while until the older can
11322 be removed entirely.
11324 All transformations are of the form:
11326 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11328 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11332 commit 98b79003c21c2578206003256de4e781d6b36ca8
11334 Date: Mon Jun 11 19:02:53 2007 -0500
11336 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11338 This is a compatibility step that allows both the older form
11339 and the new form to co-exist for a while until the older can
11340 be removed entirely.
11342 All transformations are of the form:
11344 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11346 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11350 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
11352 Date: Mon Jun 11 19:02:49 2007 -0500
11354 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11356 This is a compatibility step that allows both the older form
11357 and the new form to co-exist for a while until the older can
11358 be removed entirely.
11360 All transformations are of the form:
11362 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11364 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11368 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
11370 Date: Mon Jun 11 19:02:34 2007 -0500
11372 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11374 This is a compatibility step that allows both the older form
11375 and the new form to co-exist for a while until the older can
11376 be removed entirely.
11378 All transformations are of the form:
11380 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11382 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11386 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
11388 Date: Mon Jun 11 19:02:20 2007 -0500
11390 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11392 This is a compatibility step that allows both the older form
11393 and the new form to co-exist for a while until the older can
11394 be removed entirely.
11396 All transformations are of the form:
11398 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11400 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11404 commit d5be43de93ff905c465e509d45a3164ef48d26e7
11406 Date: Mon Jun 11 19:02:10 2007 -0500
11408 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11410 This is a compatibility step that allows both the older form
11411 and the new form to co-exist for a while until the older can
11412 be removed entirely.
11414 All transformations are of the form:
11416 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11418 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11422 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
11424 Date: Mon Jun 11 19:02:05 2007 -0500
11426 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11428 This is a compatibility step that allows both the older form
11429 and the new form to co-exist for a while until the older can
11430 be removed entirely.
11432 All transformations are of the form:
11434 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11436 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11440 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
11442 Date: Mon Jun 11 19:01:54 2007 -0500
11444 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11446 This is a compatibility step that allows both the older form
11447 and the new form to co-exist for a while until the older can
11448 be removed entirely.
11450 All transformations are of the form:
11452 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11454 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11458 commit a76adc8142c1d956385a109e0b70f9319ede4d66
11460 Date: Mon Jun 11 19:01:43 2007 -0500
11462 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11464 This is a compatibility step that allows both the older form
11465 and the new form to co-exist for a while until the older can
11466 be removed entirely.
11468 All transformations are of the form:
11470 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11472 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11476 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
11478 Date: Mon Jun 11 19:01:34 2007 -0500
11480 Introduce initial versions of new Command Config files.
11482 Derive three new files from cmd_confdefs.h:
11483 config_bootp.h - Has BOOTP related config options, not commands
11484 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
11485 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
11487 For now, include "config_bootp.h" for compatability until all
11488 users of it directly include it properly.
11492 commit 1f2a05898658900dc5717761e27abf2052e67e13
11494 Date: Sat Jun 30 18:50:48 2007 +0200
11500 commit a5d71e290f3673269be8eefb4ec44f53412f9461
11502 Date: Mon Jun 25 19:11:37 2007 +0200
11504 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
11508 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
11510 Date: Mon Jun 25 17:03:13 2007 +0200
11512 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
11514 This patch prints the DDR status registers upon machine check
11515 interrupt on the 440EPx/GRx. This can be useful especially when
11516 ECC support is enabled.
11518 I added some small changes to the original patch from Niklaus to
11519 make it compile clean.
11524 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
11526 Date: Mon Jun 25 16:50:55 2007 +0200
11528 ppc4xx: Fix O=buildir builds
11530 This patch fixes the problem to assemble cpu/ppc4xx/start.S
11531 experienced last week where building failed having specified
11532 O=../build.sequoia.
11536 commit 466fff1a7bb5fe764a06450626f6098219f446b8
11538 Date: Mon Jun 25 15:57:39 2007 +0200
11540 ppc4xx: Add pci_pre_init() for 405 boards
11542 This patch removes the CFG_PCI_PRE_INIT option completely, since
11543 it's not needed anymore with the patch from Matthias Fuchs with
11544 the "weak" pci_pre_init() implementation.
11548 commit 6f35c53166213c24a5a0e2390ed861136ff73870
11550 Date: Sun Jun 24 17:41:21 2007 +0200
11552 ppc4xx: Maintenance patch for esd's CPCI405 derivats
11554 -add pci_pre_init() for pci interrupt fixup code
11555 -disable phy sleep mode via reset_phy() function
11556 -use correct io accessors
11561 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
11563 Date: Sun Jun 24 17:23:41 2007 +0200
11565 ppc4xx: Add pci_pre_init() for 405 boards
11567 This patch adds support for calling a plattform dependant
11568 pci_pre_init() function for 405 boards. This can be used to
11569 move the current pci_405gp_fixup_irq() function into the
11572 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
11573 A default function with 'weak' attribute is used when
11574 a board specific pci_pre_init() is not implemented.
11578 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
11580 Date: Fri Jun 22 23:59:00 2007 +0200
11582 Coding stylke cleanup; rebuild CHANGELOG
11584 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
11586 Date: Wed Apr 18 14:55:19 2007 +0400
11588 Adapt log buffer code to support Linux 2.6
11590 A new environment variable, "logversion", selects the log buffer
11591 behaviour. If it is not set or set to a value other than 2, then the
11592 old, Linux 2.4.4, behaviour is selected.
11597 commit a11e06965ec91270c51853407ff1261d3c740386
11599 Date: Wed Mar 28 19:06:19 2007 +0400
11601 Extend POST support for PPC440
11603 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
11608 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
11610 Date: Fri Jun 22 19:11:54 2007 +0200
11612 [PCS440EP] upgrade the PCS440EP board:
11613 - Show on the Status LEDs, some States of the board.
11614 - Get the MAC addresses from the EEProm
11616 - use the CF on the board.
11617 - check the U-Boot image in the Flash with a SHA1
11619 - use dynamic TLB entries generation for the SDRAM
11623 commit 3a1f5c81b0b9557817a789bece839905581c2205
11625 Date: Fri Jun 22 16:58:40 2007 +0200
11627 ppc4xx: Fix problem with extended program_tlb() funtion
11629 The recently extended program_tlb() function had a problem when
11630 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
11631 virtual address was not incremented. This patch fixes this issue
11632 and is tested on Katmai with 512MB SDRAM.
11636 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
11638 Date: Fri Jun 22 14:58:04 2007 +0200
11640 [ppc] Fix build breakage for all non-4xx PowerPC variants.
11642 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
11643 - minor 4xx cleanup
11645 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
11647 Date: Fri Jun 22 10:34:12 2007 +0200
11649 [patch] add nand_init() prototype to nand.h
11651 since nand_init() is expected to be called by other parts of u-boot, there
11652 should be a prototype for it in nand.h
11657 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
11659 Date: Wed Jun 20 18:14:24 2007 +0200
11661 Coding style cleanup. Refresh CHANGELOG.
11663 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
11665 Date: Tue Jun 19 17:22:44 2007 +0200
11667 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
11669 This patch adds a board command to configure the I2C bootstrap EEPROM
11670 values. Right now 533 and 667MHz are supported for booting either via NOR
11671 or NAND FLASH. Here the usage:
11673 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
11674 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
11678 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
11680 Date: Tue Jun 19 16:42:31 2007 +0200
11682 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
11684 The latest changes showed a problem with the location of the NAND-SPL
11685 image in the OCM and the init-data area (incl. cache). This patch
11686 fixes this problem.
11690 commit 86ba99e34194394052d24c04dc40d1263d29a26f
11692 Date: Tue Jun 19 16:40:58 2007 +0200
11694 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
11698 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
11700 Date: Mon Jun 18 13:50:13 2007 -0500
11702 Added M5329AFEE and M5329BFEE Platforms
11704 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
11705 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
11706 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
11709 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
11710 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
11711 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
11712 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
11713 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
11714 lib_m68k/time.c, net/eth.c and rtc/Makefile
11718 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
11720 Date: Sun Jun 17 19:04:11 2007 +0200
11722 [fix] email reparation
11724 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
11726 Date: Sun Jun 17 19:03:21 2007 +0200
11728 [FIX] fix microblaze file permitission
11730 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
11732 Date: Fri Jun 15 11:33:41 2007 +0200
11734 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
11736 Now CONFIG_440 has to be defined in all PPC440 board config files.
11740 commit efa35cf12d914d4caba942acd5a6c45f217de302
11742 Date: Fri Jun 15 11:19:28 2007 +0200
11744 ppc4xx: Clean up 440 exceptions handling
11746 - Introduced dedicated switches for building 440 and 405 images required
11747 for 440-specific machine instructions like 'rfmci' etc.
11749 - Exception vectors moved to the proper location (_start moved away from
11750 the critical exception handler space, which it occupied)
11752 - CriticalInput now serviced (with default handler)
11754 - MachineCheck properly serviced (added a dedicated handler and return
11757 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
11758 unhandled and those not relevant for 4xx were eliminated)
11760 - Eliminated Linux leftovers, removed dead code
11766 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
11768 Date: Fri Jun 15 08:18:01 2007 +0200
11770 [ppc4xx] Add initial lwmon5 board support
11772 This patch adds initial support for the Liebherr lwmon5 board euqipped
11773 with an AMCC 440EPx PowerPC.
11777 commit 85f737376d5ff3d5f0d45a8b657686326d175307
11779 Date: Fri Jun 15 07:39:43 2007 +0200
11781 [ppc4xx] Extend 44x GPIO setup with default output state
11783 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
11784 is extended with the default GPIO output state (level).
11788 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
11790 Date: Thu Jun 14 11:14:32 2007 +0200
11792 [ppc4xx] Extend program_tlb() with virtual & physical addresses
11794 Now program_tlb() allows to program a TLB (or multiple) with
11795 different virtual and physical addresses. With this change, now one
11796 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
11797 diabled and once with caches enabled.
11801 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
11803 Date: Wed May 23 19:02:41 2007 +0200
11805 Change 'repeatable' attribute of some commands to sensible values.
11807 Most prominently this changes 'erase' to be non-repeatable.
11811 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
11813 Date: Wed May 23 18:47:48 2007 +0200
11815 Fix 'run' not to continue after interrupted command
11819 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
11821 Date: Mon Jun 11 15:14:24 2007 +0200
11823 USB: This patch fix readl in ohci swap reg access.
11827 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
11829 Date: Fri Jun 8 14:52:22 2007 +0200
11831 TQM5200: Add Flat Device Tree support, update default env. accordingly.
11836 commit 9045f33c023f698660a2e45d1b2194c0711abebc
11838 Date: Fri Jun 8 10:24:58 2007 +0200
11840 Fix config problems on SC3 board; make ide_reset_timeout work.
11842 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
11844 Date: Fri Jun 8 09:55:24 2007 +0200
11846 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
11848 Set the correct value in GPIOx_TCR when configuring the gpio
11849 with CFG_440_GPIO_TABLE.
11854 commit f539edc076cfe52bff919dd512ba8d7af0e22092
11856 Date: Thu May 24 15:52:25 2007 -0700
11858 cosmetic changes to bcm570x driver
11860 This is a cosmetic only changes submission.
11861 It affects files relevant to bcm570x driver.
11862 the commands used to generate this change was
11865 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
11867 The BMW target (the only one using this chip so far) builds cleanly, the
11868 `before and after' generated object files for drivers/bcm570x.c and
11869 drivers/tigon3.o are identical as reported by objdump -d
11874 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
11876 Date: Wed Jun 6 16:26:56 2007 +0200
11878 Coding Style cleanup; generate new CHANGELOG file.
11882 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
11884 Date: Wed Jun 6 11:49:44 2007 +0200
11886 TRAB, USB: update trab board configuration for use of generic ohci driver
11888 commit dace45acd1c1357daa9322099d07c9a9e08b0024
11890 Date: Wed Jun 6 11:49:43 2007 +0200
11892 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
11894 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
11896 Date: Wed Jun 6 11:49:43 2007 +0200
11898 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
11900 commit fc43be478f2aa37ce38acd85355038866e4162af
11902 Date: Wed Jun 6 11:49:35 2007 +0200
11904 USB/OHCI: endianness cleanup in the generic ohci driver
11906 commit c440bfe6d6d92d66478a7e84402b31f48413617b
11908 Date: Wed Jun 6 11:42:13 2007 +0200
11910 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
11912 This patch adds NAND booting support for the AMCC Acadia eval board.
11914 Please make sure to configure jumper J7 to position 2-3 when booting
11915 from NOR, and to position 1-2 when booting for NAND.
11917 I also added a board command to configure the I2C bootstrap EEPROM
11918 values. Right now only 267MHz is support for booting either via NOR
11919 or NAND FLASH. Here the usage:
11921 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
11922 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
11926 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
11928 Date: Wed Jun 6 10:08:14 2007 +0200
11930 Files include/linux/byteorder/{big,little}_endian.h define
11931 __BIG_ENDIAN and __LITTLE_ENDIAN.
11935 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
11937 Date: Wed Jun 6 10:08:14 2007 +0200
11939 Add USB PCI-OHCI, USB keyboard and event poll support to the
11940 MPC8641HPCN board config file.
11944 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
11946 Date: Wed Jun 6 10:08:14 2007 +0200
11948 USB PCI-OHCI, interrupt pipe and usb event poll support
11950 This patch added USB PCI-OHCI chips support, interrupt pipe support
11951 and usb event poll support. For supporting the USB interrupt pipe, the
11952 globe urb_priv is moved to purb in ed struct. Now, we can process
11953 several urbs at one time. The interrupt pipe support codes are ported
11954 from Linux kernel 2.4.
11958 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
11960 Date: Wed Jun 6 10:08:13 2007 +0200
11962 USB event poll support
11964 This patch adds USB event poll support, which could be used in usbkbd
11965 and other usb devices driver when the asynchronous interrupt
11966 processing is supported.
11970 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
11972 Date: Wed Jun 6 10:08:12 2007 +0200
11974 ISP116x: delay for crappy USB keys
11976 Using some (very) slow USB keys cause the USB host controller buffers
11977 are not ready to be read by the CPU so we need an extra delay before
11978 reading the USB storage data.
11982 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
11984 Date: Wed Jun 6 10:08:12 2007 +0200
11986 Change duplicate usb_cpu_init_fail to usb_board_init_fail
11993 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
11995 Date: Tue Jun 5 12:30:52 2007 -0500
11997 mpc8641 image size cleanup
11999 e600 does not have a bootpg restriction.
12000 Move the version string to beginning of image at fff00000.
12001 Resetvec.S is not needed.
12002 Update flash copy instructions.
12003 Add tftpflash env variable
12008 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
12010 Date: Mon Jun 4 08:36:05 2007 +0200
12012 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
12014 The attached patch is mainly cosmetic, allowing u-boot to
12015 display the correct bootstrap option letter according to the
12018 The original patch was extended with 405EZ support by Stefan
12024 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
12026 Date: Wed May 23 12:45:19 2007 +0400
12028 fix compilation problem for mpc8349itx CFG_RAMBOOT
12030 Current include/configs/MPC8349ITX.h does contain some support for building
12031 image that will be started from memory (without putting in into flash).
12032 It could be triggered by building with TEXT_BASE set to a low value.
12034 However, this support is incomplete: using of low TEXT_BASE causes
12035 defining configuration macros in inconsistent way, which later leads
12036 to compilation errors. In particular. flash support is being disabled,
12037 but then flash structures get referenced.
12039 This patch fixes this, making it possible to build with low TEXT_BASE.
12045 commit 8a364f0970de49949d635e60accf463c6443ef8c
12047 Date: Wed May 23 12:45:25 2007 +0400
12049 add missing 'console' var to default mpc8349itx config
12053 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
12055 Date: Fri Jun 1 16:18:17 2007 +0200
12057 ppc4xx: Add missing file for Bamboo NAND booting support
12061 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
12063 Date: Fri Jun 1 15:58:19 2007 +0200
12065 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
12067 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
12068 suggested by AMCC it is not recommended to dynamically change the EBC
12069 speed after bootup. So we undo this change to be on the safe side.
12073 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
12075 Date: Fri Jun 1 15:29:04 2007 +0200
12077 ppc4xx: Update Sequoia NAND booting support with ECC
12081 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
12083 Date: Fri Jun 1 15:27:11 2007 +0200
12085 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
12087 This patch adds NAND booting support for the AMCC Bamboo eval board.
12088 Since the NAND-SPL boot image is limited to 4kbytes, this version
12089 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
12090 supported, since the setup code for I2C DIMM autodetection and
12091 configuration is too big for this NAND bootloader.
12095 commit 42be56f53c8b107868e6125c8524ae84293e95a7
12097 Date: Fri Jun 1 15:23:04 2007 +0200
12099 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
12101 The U-Boot NAND booting support is now extended to support ECC
12102 upon loading of the NAND U-Boot image.
12104 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
12108 commit a471db07fbb65a841ffc9f4f112562b945230f98
12110 Date: Fri Jun 1 15:19:29 2007 +0200
12112 ppc4xx: Prepare Bamboo port for NAND booting support
12114 This patch updates the "normal" Bamboo NOR booting port, so
12115 that it is compatible with the coming soon NAND booting
12118 It also enables the 2nd NAND flash on the Bamboo.
12122 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
12124 Date: Fri Jun 1 15:16:58 2007 +0200
12126 ppc4xx: Update in_be32() functions and friends to latest Linux version
12130 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
12132 Date: Fri Jun 1 15:15:12 2007 +0200
12134 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
12136 This patch adds hardware ECC support to the NDFC driver. It also
12137 changes the register access from using the "simple" in32/out32
12138 functions to the in_be32/out_be32 functions, which make sure
12139 that the access is correctly synced. This is the only recommended
12140 access to SoC registers in the current Linux kernel.
12144 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
12146 Date: Fri Jun 1 15:12:15 2007 +0200
12148 NAND: Update nand_ecc.c to latest Linux version
12150 This patch updates the nand_ecc code to the latest Linux version.
12151 The main reason for this is the more compact code. This makes
12152 it possible to include the ECC code into the NAND bootloader
12153 image (NAND_SPL) for PPC4xx.
12157 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
12159 Date: Fri Jun 1 15:09:50 2007 +0200
12161 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
12165 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
12167 Date: Fri Jun 1 13:45:24 2007 +0200
12169 ppc4xx: Change Luan config file to support ECC
12171 With the updated 44x DDR2 driver the Luan board now supports
12172 ECC generation and checking.
12176 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
12178 Date: Fri Jun 1 13:45:00 2007 +0200
12180 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
12182 Add config option for 180 degree advance clock control as needed
12183 for the AMCC Luan eval board.
12187 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
12189 Date: Thu May 31 17:20:09 2007 +0200
12191 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
12195 commit 7049288fb1f16f1b317140226cdebd07bd416395
12197 Date: Sun May 27 17:26:46 2007 +0200
12199 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
12203 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
12205 Date: Sun May 27 17:06:36 2007 +0200
12207 Motion-PRO: Add support for redundant environment.
12209 Enable redundant environment, add a MTD partition for it; also add env.
12210 variable command for passing MTD partitions to the kernel command line.
12215 commit a26eabeec31746f06d309103690892805696e344
12217 Date: Sun May 27 17:05:11 2007 +0200
12219 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
12221 Allow passing longer command line to the kernel - useful especially
12222 for passing MTD partition layout.
12227 commit 9160b96f71483a116de81c68985e8ee306d36764
12229 Date: Sun May 27 17:04:18 2007 +0200
12231 Fix: Add missing NULL termination in strings expanded by macros parser.
12236 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
12238 Date: Sun May 27 17:03:37 2007 +0200
12240 Motion-PRO: Update EEPROM's page write bits and write delay.
12242 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
12243 have a page write capability of two bytes", and "This device offers fast (1ms)
12244 byte write". Add 3ms of extra delay.
12249 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
12251 Date: Sun May 27 16:58:45 2007 +0200
12253 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
12255 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
12256 networking does not function. This commit switches PHY to TX mode by clearing
12257 the FX_SEL bit of Mode Control Register. It also reverses commit
12258 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
12263 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
12265 Date: Sun May 27 16:57:15 2007 +0200
12267 Motion-PRO: Add support for the temperature sensor.
12272 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
12274 Date: Sun May 27 16:55:23 2007 +0200
12276 Motion-PRO: Add displaying of CPLD revision information during boot.
12281 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
12283 Date: Sun May 27 16:53:43 2007 +0200
12285 MPC5xxx: Change names of defines related to IPB and PCI clocks.
12287 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
12288 them does not cause PCI or IPB clocks to run at the specified speed.
12289 Instead, they configure divisors used to calculate said clocks. This
12290 patch renames the defines according to their real function.
12295 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
12297 Date: Sun May 27 16:51:48 2007 +0200
12299 Motion-PRO: Add LED support.
12305 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
12307 Date: Thu May 24 12:12:47 2007 +0200
12309 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
12315 commit d756894722c888d09a9fa1df8323753772d3dcce
12317 Date: Thu May 24 09:49:00 2007 +0200
12319 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
12322 fixes a small bug in the 405EZ OCM initialization. Thanks for
12327 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
12329 Date: Thu May 24 08:22:09 2007 +0200
12331 ppc4xx: Update AMCC Acadia support for board revision 1.1
12333 This patch updates the Acadia (405EZ) support for the new 1.1 board
12334 revision. It also adds support for NAND FLASH via the 4xx NDFC.
12336 Please note that the jumper J7 must be in position 2-3 for this
12337 NAND support. Position 1-2 is for NAND booting only. NAND booting
12338 support will follow later.
12342 commit 822d55365bb557e084d0e33625a6dedcc866110b
12344 Date: Wed May 23 14:09:46 2007 -0500
12346 Add LIST_86xx MAKEALL target for PowerPC builds.
12350 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
12352 Date: Tue May 22 12:48:09 2007 +0200
12354 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
12358 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
12360 Date: Tue May 22 12:46:10 2007 +0200
12362 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
12364 This patch adds support for 405 PPC's to the 4xx NAND driver
12365 ndfc.c. This is in preparation for the new AMCC 405EZ.
12369 commit 10603d76767426be803dadd4fb688b97eb69481c
12371 Date: Mon May 21 07:41:22 2007 +0200
12373 ppc4xx: Fix problem in 405EZ OCM initialization
12375 As spotted by Bruce Adler this patch fixes an initialization problem
12380 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
12382 Date: Fri May 18 16:47:03 2007 +0100
12384 Reduce line lengths to 80 characters max.
12386 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
12388 Date: Fri May 18 14:34:07 2007 +0100
12390 Makefile permissions
12392 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
12394 Date: Fri May 18 14:33:11 2007 +0100
12396 Makefile permissions
12398 commit 255a3577c848706441daee0174543efe205a77f8
12400 Date: Wed May 16 16:52:19 2007 -0500
12402 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
12404 For all practical u-boot purposes, TSECs don't differ throughout the
12405 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
12409 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
12411 Date: Wed May 16 14:49:12 2007 +0200
12413 Fix compile problem cause my Microblaze merge
12417 commit ada4697d0230d6da552867777f98a67ec3ba2579
12419 Date: Wed May 16 13:23:10 2007 +0200
12421 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
12423 Because the Sequoia board does not boot with an EBC faster than 66MHz,
12424 the clock divider are changed after the initial boot process.
12426 This allows for maximum clocking speeds to be achieved on newer boards.
12427 Sequoia boards with 666.66 MHz processors require that the EBC divider
12428 be set to 3 in order to start the initial boot process at a slower EBC
12429 speed. After the initial boot process, the divider can be set back to 2,
12430 which will cause the boards to run at 83.333MHz. This is backward
12431 compatible with boards with 533.33 MHz processors, as these boards will
12432 already be set with an EBC divider of 2.
12436 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
12438 Date: Wed May 16 01:16:53 2007 +0200
12440 Minor Coding Style cleanup, update CHANGELOG.
12444 commit d62f64cc23a940eafe712c776b3249e4160753d1
12446 Date: Wed May 16 00:13:33 2007 +0200
12448 Coding Style Cleanup, new CHANGELOG
12450 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
12452 Date: Tue May 15 23:38:05 2007 +0200
12454 Minor coding style cleanup.
12456 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
12458 Date: Fri Apr 20 14:23:02 2007 +0530
12460 Add driver for S-ATA-controller on Intel processors with South
12461 Bridge, ICH-5, ICH-6 and ICH-7.
12465 1. Code is divided in to two files. All functions, which are
12466 controller specific are kept in "drivers/ata_piix.c" file and
12467 functions, which are not controller specific, are kept in
12468 "common/cmd_sata.c" file.
12470 2. Reading and Writing from the S-ATA drive is done using PIO method.
12472 3. Driver can be configured for 48-bit addressing by defining macro
12473 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
12476 4. S-ATA read function is hooked to the File system, commands like
12477 ext2ls and ext2load file can be used. This has been tested.
12479 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
12480 controller and identifies the S-ATA drives connected to it.
12482 6. U-Boot command "sata" is added, which is used to read/write, print
12483 partition table and get info about the drives present. This I have
12484 implemented in same way as "ide" command is implemented in U-Boot.
12486 7. This driver is for S-ATA in native mode.
12488 8. This driver does not support the Native command queuing and
12493 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
12495 Date: Mon Apr 30 15:57:22 2007 +0530
12497 Fixes bug clearing the bss section for i386
12500 There is a bug in the code of clearing the bss section for processor
12501 i386.(File: cpu/i386/start.S)
12502 In the code, bss_start addr (starting addr of bss section) is put into
12503 the register %eax, but the code which clears the bss section refers to
12504 the addr pointed by %edi.
12506 This patch fixes this bug by putting bss_start into %edi register.
12510 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
12512 Date: Mon Apr 30 16:47:28 2007 -0500
12514 Add support for BCM5464 Quad Phy
12516 Added support for Broadcom's BCM5464 Quad Phy
12520 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
12522 Date: Wed May 9 08:10:57 2007 +0800
12524 Search the exception table with linear algorithm
12526 Search the exception table with linear algorithm instead of
12527 bisecting algorithm.
12528 Because the exception table might be unsorted.
12532 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
12534 Date: Mon May 14 11:47:35 2007 +0800
12536 Fix compilation issues on MACOSX
12541 commit 56fd7162985c412317bbf763a225fba23c64fd31
12543 Date: Tue May 15 07:55:42 2007 -0700
12545 Fix for compile of JSE target
12547 The attached patch fixes the compile of the JSE board in the
12548 denx git as of 14 may 2007. It is an extremely simple patch,
12549 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
12551 Fix to compile JSE against 20070514 git of u-boot
12553 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
12554 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
12555 Date: Sun May 13 21:01:03 2007 +0900
12557 sh: MS7750SE support.
12559 This adds support for the Hitachi MS7750SE.
12563 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
12564 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
12565 Date: Sun May 13 20:58:00 2007 +0900
12567 sh: First support code of SuperH.
12571 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
12573 Date: Fri May 11 12:01:49 2007 +0200
12575 ppc4xx: Add mtcpr/mfcpr access macros
12579 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
12581 Date: Fri May 11 12:01:06 2007 +0200
12583 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
12587 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
12589 Date: Thu May 10 16:55:52 2007 +0200
12591 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
12594 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
12596 Date: Wed May 9 11:42:44 2007 +0100
12598 Add the board directory for SMN42
12600 commit 160131bf965785419626df6c388729fe0b597992
12602 Date: Wed May 9 11:41:58 2007 +0100
12604 Add the files for the SMN42 board
12606 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
12608 Date: Wed May 9 11:40:34 2007 +0100
12610 Remove the deleted files for the SMN42 patch
12612 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
12614 Date: Wed May 9 11:37:56 2007 +0100
12616 New board SMN42 branch
12618 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
12620 Date: Wed May 9 10:24:38 2007 +0100
12622 Makefile permissions
12624 commit b84289b595731e8851df46e893845cc1322c9b9b
12626 Date: Tue May 8 14:17:07 2007 -0500
12628 8641hpcn: Fix Makefile after moving pixis to board/freescale.
12630 The OBJTREE != SRCTREE build scenario was broken.
12636 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
12638 Date: Tue May 8 15:57:43 2007 +0200
12640 add: reading special purpose registers
12642 commit 1a50f164beb065f360fbddb76029607d6b099698
12644 Date: Tue May 8 14:52:52 2007 +0200
12646 add: Microblaze V5 exception handling
12648 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
12650 Date: Tue May 8 14:39:11 2007 +0200
12652 add: FSL control read and write
12654 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
12656 Date: Tue May 8 13:05:44 2007 +0200
12658 [Motion-PRO] Add support for I2C, EEPROM and RTC.
12660 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
12662 Date: Tue May 8 10:23:56 2007 +0200
12664 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
12667 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
12669 Date: Tue May 8 09:39:12 2007 +0200
12671 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
12672 eliminates networking problems in Linux (timeouts).
12674 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
12676 Date: Tue May 8 09:21:57 2007 +0200
12678 [Motion-PRO] Enable Flat Device Tree support and modify default environment
12679 to allow booting of FDT-expecting kernels.
12681 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
12683 Date: Mon May 7 23:58:31 2007 +0200
12685 new: USE_MSR_INTR support
12687 commit 008861a2f3ef2c062744d733787c7e530a1b8761
12689 Date: Mon May 7 22:36:15 2007 +0200
12691 [MPC5xxx] There are networking problems on the Motion-PRO board with
12692 current PHY initalization code (tftp timeouts all the time). This commit
12693 temporarily disables PHY initalization sequence to make the networking
12694 operational, until a fix is found.
12696 commit abca901869c3760b6c5fecb825db6c1d91a78a93
12698 Date: Mon May 7 22:10:36 2007 +0200
12700 Get rid of duplicated file (see include/configs/sbc8560.h instead)
12704 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
12706 Date: Mon May 7 22:07:08 2007 +0200
12708 Get rid of duplicated file (see doc/README.SBC8560 instead)
12712 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
12714 Date: Mon May 7 19:43:10 2007 +0200
12716 fix: read and write MSR - repair number of parameters
12718 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
12720 Date: Mon May 7 19:42:49 2007 +0200
12722 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
12724 A '3' got cut off in the formatting of the last patch to automatically
12725 change the clock speed of the system clock on sequoia board.
12730 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
12732 Date: Mon May 7 19:33:51 2007 +0200
12734 new: fsl interrupt support
12735 FSL_Has_data is connected to INTC.
12737 commit 792032baa7d625e34c981ab6df521911bd8dc861
12739 Date: Mon May 7 19:30:12 2007 +0200
12741 fix: interrupt handler
12744 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
12746 Date: Mon May 7 19:25:08 2007 +0200
12748 fix: remove asm code
12750 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
12752 Date: Mon May 7 19:12:43 2007 +0200
12754 fix: clean interrupt
12756 commit 42efed6130c8fcf7da881385b5427065d2801757
12758 Date: Mon May 7 17:22:25 2007 +0200
12760 fix: interrupt handler for multiple sources
12762 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
12764 Date: Mon May 7 17:11:09 2007 +0200
12766 new: add writing to msr register
12768 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
12770 Date: Mon May 7 16:43:56 2007 +0200
12772 Fix an ancient CHANGELOG conflict
12774 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
12776 Date: Sat May 5 08:12:30 2007 +0200
12778 5xxx: write MAC address to mac-address and local-mac-address
12780 Some device trees have a mac-address property, some have local-mac-address,
12781 and some have both. To support all of these device trees, ftp_cpu_setup()
12782 should write the MAC address to mac-address and local-mac-address, if they
12788 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
12790 Date: Sun Apr 29 14:01:54 2007 +0200
12792 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
12794 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
12795 message. Use PVR to distinguish between the two variants, and print proper CPU
12802 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
12804 Date: Wed Apr 25 16:01:26 2007 +0200
12806 [PATCH] simplify silent console
12811 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
12813 Date: Mon Apr 23 15:30:39 2007 +0200
12815 [PATCH] Avoid assigning PCI resources from zero address
12817 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
12818 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
12819 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
12820 sentence about "0" being considered an invalid address) -- so, use a reasonable
12821 starting value of 0x1000 (that's what the most Linux archs are using).
12823 Alternatively, one might have fixed the calls to pci_set_region() individually
12824 (some code even seems to have taken care of this issue) but that would have
12825 been a lot more work. :-)
12830 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
12832 Date: Mon Apr 23 14:00:11 2007 +0200
12834 [patch] setenv(...) can delete environmentalvariables
12836 update setenv() function so that entering a NULL value for the
12837 variable's value will delete the environmental variable
12842 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
12844 Date: Mon Apr 23 13:54:24 2007 +0200
12846 [patch] use unsigned char in smc91111 driver for mac
12848 the v_mac variable in the smc91111 driver is declared as a signed char ...
12849 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
12850 because when it gets printed out, you get a display like:
12851 0xFFFFFFE0 and that's no good
12855 commit ffc50f9bb194343c6303517a517708457a5eb6b8
12857 Date: Sat May 5 18:54:42 2007 +0200
12859 new: FSL and MSR support #2
12861 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
12863 Date: Sat May 5 18:27:16 2007 +0200
12865 new: FSL and MSR support
12867 commit 2f15278c2eb911c668b4fe562130b78cf554d139
12869 Date: Sat May 5 18:23:11 2007 +0200
12871 Coding stylke cleanup; update CHANGELOG.
12875 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
12877 Date: Sat May 5 18:05:02 2007 +0200
12879 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
12883 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
12885 Date: Sat May 5 17:15:50 2007 +0200
12887 Make "file" command happy with some config.mk files; update CHANGELOG
12889 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
12891 Date: Sat May 5 08:32:14 2007 +0200
12893 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
12895 The AMCC Secquoia board has been changed in a new revision from using a
12896 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
12897 indicates the difference. This patch reads that bit and uses the correct
12898 clock speed for the board. This code is backward compatable will all
12899 prior boards. All prior boards will be read as 33.000.
12904 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
12906 Date: Sat May 5 08:29:01 2007 +0200
12908 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
12910 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
12911 for the 4k NAND boot image so define bus_frequency to 133MHz here
12912 which is save for the refresh counter setup.
12916 commit 2f550ab976405300f5b07bf2890800840d0aa05f
12918 Date: Sat May 5 08:12:30 2007 +0200
12920 5xxx: write MAC address to mac-address and local-mac-address
12922 Some device trees have a mac-address property, some have local-mac-address,
12923 and some have both. To support all of these device trees, ftp_cpu_setup()
12924 should write the MAC address to mac-address and local-mac-address, if they
12930 commit a79886590593ba1d667c840caa4940c61639f18f
12932 Date: Sat May 5 07:04:42 2007 +0200
12934 NAND: Wrong calculation of page number in nand_block_bad()
12936 In case that there is no memory based bad block table available the
12937 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
12938 nand_block_bad() directly. When parameter 'getchip' is set to zero,
12939 nand_block_bad() will not right shift the offset to calculate the
12940 correct page number.
12945 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
12947 Date: Fri May 4 10:02:33 2007 +0200
12949 Fix initrd length corruption in bootm command.
12951 When using FDT Images, the length of an inital ramdisk was
12952 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
12954 Patches by Timur Tabi & Johns Daniel.
12958 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
12960 Date: Thu May 3 19:43:52 2007 -0500
12962 mpc83xx: fix trivial error in MAKEALL
12966 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
12968 Date: Thu May 3 16:34:41 2007 +0200
12970 Update board configuration for STX GP3SSA board:
12972 Enable hush shell, environment in flash rather in EEPROM,
12973 more user-friendly default environment, etc.
12974 The simple EEPROM environment can be selected easily in the board
12979 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
12981 Date: Tue Apr 24 14:37:49 2007 +0200
12983 Cleanup STX GP3SSA code; fix build and compile problems.
12985 commit 35171dc04e028ecacc23ad916a66295472555dbf
12987 Date: Fri Jan 5 09:15:34 2007 +0100
12989 Add support for STX GP3SSA (stxssa) Board
12993 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
12995 Date: Wed May 2 13:31:53 2007 +0200
12997 macb: Don't restart autonegotiation if we already have link
12999 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
13000 link is already up.
13004 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
13006 Date: Wed May 2 13:22:38 2007 +0200
13008 macb: Introduce a few barriers when dealing with DMA descriptors
13010 There were a few theoretical possibilities that the compiler might
13011 optimize away DMA descriptor reads and/or writes and thus cause
13012 synchronization problems with the hardware. Insert barriers where
13013 we depend on reads/writes actually hitting memory.
13017 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
13019 Date: Sat Feb 24 01:08:13 2007 -0600
13021 Cleaned up some 85xx PCI bugs
13023 * Cleaned up the CDS PCI Config Tables and added NULL entries to
13025 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
13026 * Fixed 85xx PCI code to assign powar region sizes based on the
13027 config values (rather than hard-coding them)
13028 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
13032 commit 6743105988fc44d5b0d30388c790607835aae7a6
13034 Date: Mon Apr 23 02:54:25 2007 -0500
13036 Add support for the 8568 MDS board
13038 This included some changes to common files:
13039 * Add 8568 processor SVR to various places
13040 * Add support for setting the qe bus-frequency value in the dts
13041 * Add the 8568MDS target to the Makefile
13045 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
13047 Date: Fri Apr 20 14:34:48 2007 -0500
13049 Add support for treating unknown PHYs as generic PHYs.
13051 When bringing up u-boot on new boards, PHY support sometimes gets
13052 neglected. Most PHYs don't really need any special support,
13053 though. By adding a generic entry that always matches if nothing
13054 else does, we can provide support for "unsupported" PHYs for the
13057 The generic PHY driver supports most PHYs, including gigabit.
13062 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
13064 Date: Wed Feb 7 15:28:04 2007 -0600
13066 Conditionalize 8641 Rev1.0 MCM workarounds
13071 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
13073 Date: Mon Apr 30 13:59:50 2007 -0500
13075 Fix memory initialization on MPC8349E-mITX
13077 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
13078 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
13079 on some ITX boards, notably those with a revision 3.1 CPU.
13081 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
13082 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
13088 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
13090 Date: Mon Apr 30 15:26:21 2007 -0500
13092 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
13094 and fix CPU: to align with Board: display text.
13098 commit c1ab82669d9525998c34e802a12cad662723f22a
13100 Date: Fri Mar 16 13:02:53 2007 -0500
13102 Rewrote picos_to_clk() to avoid rounding errors.
13103 Clarified that conversion is to DRAM clocks rather than platform clocks.
13104 Made function static to spd_sdram.c.
13109 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
13111 Date: Sun Apr 29 14:13:01 2007 +0200
13113 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
13117 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
13119 Date: Sun Apr 29 14:01:54 2007 +0200
13121 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
13123 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
13124 message. Use PVR to distinguish between the two variants, and print proper CPU
13131 commit 5c5d3242935cf3543af01142627494434834cf98
13133 Date: Wed Apr 25 12:34:38 2007 -0500
13135 mpc83xx: minor fixups for 8313rdb introduction
13137 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
13139 Date: Wed Apr 25 16:01:26 2007 +0200
13141 [PATCH] simplify silent console
13146 commit 144876a380f5756f57412caf74c1d6dc201dd796
13148 Date: Tue Apr 24 23:01:02 2007 +0200
13150 [PATCH] MTD partition support, JFFS2 support
13152 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
13154 Date: Tue Apr 24 14:03:45 2007 +0200
13156 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
13160 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
13162 Date: Mon Apr 23 02:37:47 2007 -0500
13164 Reworked 85xx speed detection code
13166 Changed the code to read the registers and calculate the clock
13167 rates, rather than using a "switch" statement.
13173 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
13175 Date: Mon Apr 23 02:24:28 2007 -0500
13177 Enable 8544 support
13179 * Add support to the Makefile
13180 * Add 8544 configuration support to the tsec driver
13181 * Add 8544 SVR numbers to processor.h
13186 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
13188 Date: Fri Feb 23 17:12:25 2007 -0600
13190 Support 1G size on 8548
13192 e500v2 and newer cores support 1G page sizes.
13197 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
13199 Date: Fri Feb 23 17:11:16 2007 -0600
13201 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
13203 The other pagesz constants use one letter to specify order of
13204 magnitude. Also change the one reference to it in mpc8548cds/init.S
13208 commit 1f9a318cea14272edd10d63739e2d326c90f430e
13210 Date: Fri Feb 23 16:28:46 2007 -0600
13212 Only set ddrioovcr for 8548 rev1.
13217 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
13219 Date: Sat Feb 24 01:16:45 2007 -0600
13221 Tweak DDR ECC error counter
13223 Enable single-bit error counter when memory was cleared by ddr controller.
13228 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
13230 Date: Mon Feb 12 13:34:55 2007 -0600
13232 85xx: write MAC address to mac-address and local-mac-address
13234 Some device trees have a mac-address property, some have local-mac-address,
13235 and some have both. To support all of these device trees, ftp_cpu_setup()
13236 should write the MAC address to mac-address and local-mac-address, if they
13241 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
13243 Date: Mon Apr 23 01:44:44 2007 -0500
13245 Some 85xx cpu cleanups
13247 * Cleaned up the TSR[WIS] clearing
13248 * Cleaned up DMA initialization
13254 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
13256 Date: Mon Apr 23 01:32:22 2007 -0500
13258 Add cpu support for the 8544
13260 Recognize new SVR values, and add a few register definitions
13266 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
13268 Date: Wed Apr 11 16:51:02 2007 -0500
13270 Add MPC8544DS basic port board files.
13272 Add board port under new board/freescale directory
13273 structure and reuse existing PIXIS FPGA support there.
13278 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
13280 Date: Wed Apr 11 16:50:57 2007 -0500
13282 Add MPC8544DS main configuration file.
13287 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
13289 Date: Wed Dec 27 22:07:15 2006 +0300
13291 Fix PCI I/O space mapping on Freescale MPC85x0ADS
13293 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
13294 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
13295 describing the local address window used for the PCI I/O space accesses -- fix
13296 this and carry over the necessary changes into the MPC8560ADS code since the
13297 PCI I/O space mapping was also broken for this board (by the earlier commit
13298 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
13299 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
13303 board/mpc8540ads/init.S | 4 ++--
13304 board/mpc8560ads/init.S | 4 ++--
13305 include/configs/MPC8540ADS.h | 5 ++---
13306 include/configs/MPC8541CDS.h | 2 +-
13307 include/configs/MPC8548CDS.h | 2 +-
13308 include/configs/MPC8560ADS.h | 8 ++++----
13309 6 files changed, 12 insertions(+), 13 deletions(-)
13311 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
13313 Date: Tue Dec 5 16:42:30 2006 +0800
13315 u-boot: Fix e500 v2 core reset bug
13317 The following patch fixes the e500 v2 core reset bug.
13318 For e500 v2 core, a new reset control register is added to reset the
13323 commit 63247a5acd58032e6cf33f525bc3923b467bac88
13325 Date: Wed Dec 20 11:01:00 2006 +0800
13327 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
13329 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
13330 entry number to control the loop. This can reduce the potential risk
13331 for the 85xx processor increasing its TLB adn LAW entry number.
13336 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
13338 Date: Mon Dec 18 17:01:04 2006 +0800
13340 u-boot: Fix the 85xxcds tsec bug
13342 Fix the 85xxcds tsec bug.
13343 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
13347 commit 7337b237ffc4aaf1b9467024fe472a880d852598
13349 Date: Fri Dec 15 14:43:31 2006 +0800
13351 u-boot: Fix CPU2 errata on MPC8548CDS board
13353 This patch apply workaround of CPU2 errata on MPC8548CDS board.
13357 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
13359 Date: Mon Dec 18 16:25:15 2006 +0800
13361 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
13363 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
13367 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
13369 Date: Thu Dec 14 14:14:55 2006 +0800
13371 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
13373 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
13377 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
13379 Date: Mon Apr 16 14:54:15 2007 -0500
13381 mpc83xx: Add MPC8313ERDB support.
13385 commit 49ea3b6eafe606285ae4d5c378026153dde53200
13387 Date: Mon Apr 16 14:34:21 2007 -0500
13389 mpc83xx: Add generic PCI setup code.
13391 Board code can now request the generic setup code rather than having to
13392 copy-and-paste it for themselves. Boards should be converted to use this
13393 once they're tested with it.
13397 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
13399 Date: Mon Apr 16 14:34:19 2007 -0500
13401 mpc83xx: Add 831x support to speed.c.
13405 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
13407 Date: Mon Apr 16 14:34:18 2007 -0500
13409 mpc83xx: Add 831x support to global_data.h
13413 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
13415 Date: Mon Apr 16 14:34:16 2007 -0500
13417 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
13419 Rather than misleadingly define PVR_83xx as the specific type of 83xx
13420 being built for, the PVR of each core revision is defined. checkcpu() now
13421 prints the core that it detects, rather than aborting if it doesn't find
13422 what it thinks it wants.
13426 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
13428 Date: Mon Apr 16 14:34:15 2007 -0500
13430 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
13434 commit d87c57b201b4572d16f1b642998faa00c9912b16
13436 Date: Mon Apr 16 14:31:55 2007 -0500
13438 mpc83xx: Add register definitions for MPC831x.
13442 commit 7fc4c71a143be8666d70803fb25ae60379c95622
13444 Date: Mon Apr 23 15:39:59 2007 +0200
13450 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
13452 Date: Mon Apr 23 15:30:39 2007 +0200
13454 [PATCH] Avoid assigning PCI resources from zero address
13456 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
13457 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
13458 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
13459 sentence about "0" being considered an invalid address) -- so, use a reasonable
13460 starting value of 0x1000 (that's what the most Linux archs are using).
13462 Alternatively, one might have fixed the calls to pci_set_region() individually
13463 (some code even seems to have taken care of this issue) but that would have
13464 been a lot more work. :-)
13469 commit afb903a2eb9436baa9270ccc0c27082d86497d89
13471 Date: Mon Apr 23 14:00:11 2007 +0200
13473 [patch] setenv(...) can delete environmentalvariables
13475 update setenv() function so that entering a NULL value for the
13476 variable's value will delete the environmental variable
13481 commit 36f104e5caa747d568eff26b369565af57c2ffa6
13483 Date: Mon Apr 23 13:54:24 2007 +0200
13485 [patch] use unsigned char in smc91111 driver for mac
13487 the v_mac variable in the smc91111 driver is declared as a signed char ...
13488 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
13489 because when it gets printed out, you get a display like:
13490 0xFFFFFFE0 and that's no good
13494 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
13496 Date: Mon Apr 23 13:10:52 2007 +0200
13498 USB: (Another) delay for crappy USB keys.
13500 Some USB keys are slow in giving back an answer when the Root HUB
13501 enables power lines.
13505 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
13507 Date: Mon Apr 23 12:00:22 2007 +0200
13509 Remove BOARDLIBS usage completely
13513 commit 32556443840f127170e4baa8bdd5b567039f6c36
13515 Date: Sat Apr 21 21:07:22 2007 +0200
13517 [PATCH] SystemACE support for Microblaze
13519 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
13521 Date: Sat Apr 21 21:02:40 2007 +0200
13523 16bit read/write little endian
13525 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
13527 Date: Sat Apr 21 20:53:31 2007 +0200
13529 Change ML401 parameters - Xilinx BSP
13531 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
13533 Date: Wed Feb 28 05:37:29 2007 -0600
13535 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
13539 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
13541 Date: Fri Jan 19 10:42:37 2007 +0800
13543 Enable LAWs for MPC8641 PCI-Ex2.
13548 commit bd7851ce1e1f140665b520026abf1042968b1102
13550 Date: Fri Apr 20 14:12:26 2007 -0500
13552 mpc86xx; Write MAC address to mac-address and local-mac-address
13554 Some device trees have a mac-address property, some have local-mac-address,
13555 and some have both. To support all of these device trees, ftp_cpu_setup()
13556 should write the MAC address to mac-address and local-mac-address, if they
13562 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
13564 Date: Fri Apr 20 14:11:38 2007 -0500
13566 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
13571 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
13573 Date: Fri Apr 20 17:43:28 2007 +0200
13575 Cleanup compiler warnings, update CHANGELOG
13579 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
13581 Date: Fri Apr 20 12:01:47 2007 +0200
13583 Fix breakage of NC650 board with respect to nand support.
13587 commit 39f23cd90947639ac278a18ff277ec786b5ac167
13589 Date: Fri Apr 20 11:13:16 2007 +0200
13591 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
13593 G2 core reference manual says decrementer and time base
13594 are decreasing/increasing once every 4 bus clock cycles.
13595 Lets fix it, so time in Linux won't run twice as fast
13600 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
13602 Date: Thu Apr 19 23:14:39 2007 -0400
13604 Fix serious pointer bug with bootm and reserve map.
13606 What was suppose to be a stack variable was declared as a pointer,
13607 overwriting random memory.
13608 Also moved the libfdt.a requirement into the main Makefile. That is
13611 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
13613 Date: Thu Apr 19 09:53:52 2007 +0200
13615 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
13617 Previous versions used full wait states for the chip select #1 which
13618 is connected to the Xilinix SystemACE controller on the AMCC Katmai
13619 evaluation board. This leads to really slow access and therefore low
13620 performance. This patch now sets up the chip select a lot faster
13621 resulting in much better read/write performance of the Linux driver.
13625 commit 37837828d89084879bee2f2b8c7c68d4695940df
13627 Date: Wed Apr 18 17:49:29 2007 +0200
13629 Clenaup, update CHANGELOG
13633 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
13635 Date: Wed Apr 18 17:20:58 2007 +0200
13641 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
13643 Date: Wed Apr 18 17:07:26 2007 +0200
13645 Cleanup, update CHANGELOG
13649 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
13651 Date: Wed Apr 18 16:17:46 2007 +0200
13655 commit ad4eb555671d97f96dc56eab55103b1f86874b01
13657 Date: Wed Apr 18 14:30:39 2007 +0200
13659 MCC200 board: remove warning which is obsolete after PSoC firmware changes
13663 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
13665 Date: Wed Apr 18 12:11:05 2007 +0200
13667 [PATCH] icecube/lite5200b: document wakeup from low-power support
13671 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
13673 Date: Wed Apr 18 12:07:47 2007 +0200
13675 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
13679 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
13681 Date: Wed Apr 18 12:05:59 2007 +0200
13683 ppc4xx: Add output for bootrom location to 405EZ ports
13685 Now 405EZ ports also show upon bootup from which boot device
13686 they are configured to boot:
13688 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
13690 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
13691 Bootstrap Option E - Boot ROM Location EBC (32 bits)
13692 16 kB I-Cache 16 kB D-Cache
13693 Board: Acadia - AMCC PPC405EZ Evaluation Board
13697 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
13699 Date: Tue Apr 17 13:30:33 2007 +0100
13701 Move ppearse to ARM board list
13702 Add Konstantin Kletschke for scb9328.
13705 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
13707 Date: Mon Apr 16 14:00:13 2007 +0200
13709 [PATCH] icecube/lite5200b: wakeup from low-power support
13711 U-Boot part of Lite5200b low power mode support.
13712 Puts SDRAM out of self-refresh and transfers control to
13713 address saved at physical 0x0.
13718 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
13720 Date: Sun Apr 15 13:54:26 2007 -0400
13722 Fix the ft_cpu_setup() property settings.
13724 Use "setter" functions instead of flags, cleaner and more flexible.
13725 It also fixes the problem noted by Timur Tabi that the ethernet MAC
13726 addresses were all being set incorrectly to the same MAC address.
13728 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
13730 Date: Sat Apr 14 22:51:24 2007 -0400
13732 Improve the bootm command for CONFIG_OF_LIBFDT
13734 In bootm, create the "/chosen" node only if it doesn't already exist
13735 (better matches the previous behavior).
13736 Update for proper reserved memory map handling for initrd.
13738 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
13740 Date: Sat Apr 14 22:46:41 2007 -0400
13742 Add some utilities to manipulate the reserved memory map.
13744 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
13746 Date: Sat Apr 14 21:16:54 2007 +0200
13750 commit 8e6875183cdca91c134408d119d4abcd48ef6856
13752 Date: Sun Dec 17 18:56:46 2006 +0100
13754 AVR32: Enable MMC support
13756 Set up the portmux for the MMC interface and enable the MMC driver
13757 along with support for DOS partitions, ext2 and FAT filesystems.
13761 commit fc26c97bb6df41b4a95662c34054fe912387bf38
13763 Date: Fri Jan 20 10:03:53 2006 +0100
13767 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
13769 The AT91 ARM-based CPUs use basically the same hardware, so it should
13770 be possible to share this driver, but no effort has been made so far.
13772 Hardware documentation can be found in the AT32AP7000 data sheet,
13773 which can be downloaded from
13775 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
13779 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
13781 Date: Sun Dec 17 18:55:37 2006 +0100
13783 AVR32: Add clk and gpio infrastructure for mmci
13785 Implement functions for configuring the mmci pins, as well as
13786 functions for getting the clock rate of the mmci controller.
13790 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
13792 Date: Sun Dec 17 18:53:56 2006 +0100
13794 Enable partition support with MMC
13796 Include implementations of init_part() and get_partition_info() when
13801 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
13803 Date: Sun Dec 17 17:14:30 2006 +0100
13805 AVR32: Enable networking
13807 Implement MACB initialization for AVR32 and ATSTK1000, and turn
13808 everything on, including the MACB driver.
13812 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
13814 Date: Fri Jan 20 10:03:34 2006 +0100
13816 Atmel MACB ethernet driver
13818 Driver for the Atmel MACB on-chip ethernet controller.
13820 This driver has been tested on the ATSTK1000 board with a AT32AP7000
13821 CPU. It should probably work on AT91SAM926x as well with some minor
13824 Hardware documentation can be found in the AT32AP7000 data sheet,
13825 which can be downloaded from
13827 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
13831 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
13833 Date: Sun Dec 17 16:56:14 2006 +0100
13835 AVR32: Add clk and gpio infrastructure for macb0 and macb1
13837 Implement functions for configuring the macb0 and macb1 pins, as
13838 well as functions for getting the clock rate of the various
13839 busses the macb ethernet controllers are connected to.
13843 commit d5acb95b16a0a74c643524342c3437e765426d05
13845 Date: Sun Dec 17 15:39:15 2006 +0100
13847 AVR32: Implement simple DMA memory allocator
13849 Implement dma_alloc_coherent() which returns cache-aligned
13850 uncacheable memory.
13854 commit 91975b0fea773c9e681fea8cf3349669f27685ee
13856 Date: Sun Dec 17 15:46:02 2006 +0100
13858 Import <linux/mii.h> from the Linux kernel
13860 Instead of creating yet another set of MII register definitions
13861 in the macb driver, here's a complete set of definitions for everyone
13866 commit 1b804b229556a4d862da93c0ec94e79419364b2c
13868 Date: Wed Mar 21 19:47:36 2007 +0100
13870 AVR32: Include more commands for ATSTK1000
13872 Include the imi, imls and jffs commands sets by default on ATSTK1000.
13873 Also define CONFIG_BOOTARGS to something more useful, define
13874 CONFIG_BOOTCOMMAND and enable autoboot by default.
13878 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
13880 Date: Wed Mar 21 19:44:48 2007 +0100
13882 AVR32: Provide a definition of struct stat
13884 Copy the definition of struct stat from the Linux kernel.
13888 commit 12f099c08167a7a51aeee623bc16dafd0841271c
13890 Date: Sun Dec 17 14:46:06 2006 +0100
13892 AVR32: Use initdram() instead of board_init_memories()
13894 Conform to the "standard" interface and use initdram() instead of
13895 board_init_memories() on AVR32. This enables us to get rid of the
13896 sdram_size member of the global_data struct as well.
13900 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
13902 Date: Mon Nov 20 15:53:10 2006 +0100
13904 AVR32: Relocate u-boot to SDRAM
13906 Relocate the u-boot image into SDRAM like everyone else does. This
13907 means that we can handle much larger .data and .bss than we used to.
13911 commit df548d3c3e2bbc40258713167859ffc2ce99a900
13913 Date: Sun Nov 19 18:06:53 2006 +0100
13915 AVR32: Resource management rewrite
13917 Rewrite the resource management code (i.e. I/O memory, clock gating,
13918 gpio) so it doesn't depend on any global state. This is necessary
13919 because this code is heavily used before relocation to RAM, so we
13920 can't write to any global variables.
13922 As an added bonus, this makes u-boot's memory footprint a bit smaller,
13923 although some functionality has been left out; all clocks are enabled
13924 all the time, and there's no checking for gpio line conflicts.
13928 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
13930 Date: Sat Nov 18 18:01:13 2006 +0100
13932 AVR32: Clean up memory-map.h for at32ap7000
13934 Convert spaces to tabs (must have missed this one last time around),
13935 sort the entries by address and group them together by bus
13940 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
13942 Date: Sat Nov 18 17:32:31 2006 +0100
13944 AVR32: Build position-independent u-boot
13946 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
13947 position independent. This will make relocation a lot easier.
13949 -mno-init-got means that gcc shouldn't emit code to load the GOT
13950 address into r6 in every function prologue. We do it once and for
13951 all in the early startup assembly code, so enabling this option
13952 makes u-boot a bit faster and smaller.
13954 The assembly parts have always been position-independent, so no code
13955 changes should be necessary.
13959 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
13961 Date: Sat Nov 18 17:24:31 2006 +0100
13963 AVR32: Use avr32-linux- cross-compilation prefix by default
13965 It doesn't really matter which toolchain you use to compile u-boot,
13966 but the avr32-linux one is probably what most people have installed.
13970 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
13972 Date: Sat Nov 18 17:15:30 2006 +0100
13974 AVR32: Split start_u_boot into board_init_f and board_init_r
13976 Split the avr32 initialization code into a function to run before
13977 relocation, board_init_f and a function to run after relocation,
13978 board_init_r. For now, board_init_f simply calls board_init_r
13983 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
13985 Date: Sat Apr 14 05:26:48 2007 +0200
13987 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
13988 clear the Display after reset.
13992 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
13994 Date: Fri Apr 13 09:13:33 2007 +0200
13996 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
13998 Fix bug introduced by "Fix get_partition_info() parameter error in all
13999 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
14000 to use diskboot or scsiboot form another device than 0.
14004 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
14006 Date: Fri Apr 13 08:02:24 2007 +0200
14008 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
14013 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
14015 Date: Fri Mar 9 19:08:25 2007 +0800
14017 Fix two bugs for MPC83xx DDR2 controller SPD Init
14019 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
14020 the first bug is that the picos_to_clk routine introduces a huge
14021 rounding error in 83xx.
14022 the second bug is that the mode register write recovery field is
14023 tWR-1, not tWR >> 1.
14025 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
14027 Date: Thu Apr 12 14:15:59 2007 +0200
14029 ppc4xx: Fix i2c divisor calcularion for PPC4xx
14031 This patch fixes changes the i2c_init(...) function to use the function
14032 get_OPB_freq() rather than calculating the OPB speed by
14033 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
14034 specific per processor. The prior method was not and so was calculating
14035 the wrong speed for some PPC4xx processors.
14040 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
14042 Date: Wed Apr 11 17:25:01 2007 +0200
14048 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
14050 Date: Wed Apr 11 17:22:55 2007 +0200
14052 Update for SC3 board
14054 * Make IDE timeout configurable through ide_reset_timeout variable.
14055 * Use Newline as "password" string
14056 * Use just a single partition in NAND flash
14058 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
14060 Date: Mon Jan 22 12:37:30 2007 -0600
14062 Add PIXIS FPGA support for MPC8641HPCN board.
14064 Move the 8641HPCN's PIXIS code to the new directory
14065 board/freescale/common/ as it will be shared by
14066 future boards not in the same processor family.
14068 Write a "pixis_reset" command that utilizes the FPGA
14069 reset sequencer to support alternate soft-reset options
14070 such as using the "alternate" flash bank, enabling
14071 the watch dog, or choosing different CPU frequencies.
14073 Add documentation for the pixis_reset to README.mpc8641hpcn.
14078 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
14080 Date: Fri Apr 6 14:19:43 2007 -0400
14082 Moved fdt command support code to fdt_support.c
14084 ...in preparation for improving the bootm command's handling of fdt blobs.
14085 Also cleaned up some coding sloppiness.
14087 commit 6679f9299534e488a171a9bb8f9bb891de247aab
14089 Date: Fri Apr 6 14:17:14 2007 -0400
14091 libfdt: Make fdt_check_header() public
14093 Changed _fdt_check_header() to fdt_check_header() and made it part of
14094 the interface - it is a useful routine.
14096 Also did some asthetics cleanup to the include files (headers).
14098 commit c0707ce65677650b5ceab0500ee50ae5168afef2
14100 Date: Thu Apr 5 18:34:06 2007 +0800
14102 [Blackfin][PATCH] Kill off a bunch of common local prototypes
14104 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
14106 Date: Thu Apr 5 18:33:04 2007 +0800
14108 [Blackfin][PATCH] Fix dynamic CPLB generation issue
14110 commit 0445e3a264251d75b1be45ef713c70726a2952f0
14112 Date: Thu Apr 5 18:31:47 2007 +0800
14114 [Blackfin][PATCH] minior cleanup
14116 commit 155fd766573981090e638b493d5857562151862e
14118 Date: Thu Apr 5 18:31:18 2007 +0800
14120 [Blackfin][PATCH] Fix copyright and update license
14122 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
14124 Date: Thu Apr 5 18:30:25 2007 +0800
14126 [Blackfin][PATCH] Add BF537 EMAC driver initialization
14128 commit 889256e8604e0c68db1d866d720894dffede9df6
14130 Date: Thu Apr 5 18:29:55 2007 +0800
14132 [Blackfin][PATCH] call real the system synchronize instruction
14134 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
14136 Date: Thu Apr 5 18:29:17 2007 +0800
14138 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
14140 commit dfeeab2cd680df047e68e723b246adf6f33bb556
14142 Date: Thu Apr 5 18:28:34 2007 +0800
14144 [Blackfin][PATCH]: fix flash unaligned copy issue
14146 commit 443feb740584e406efa203af909fe2926608e8d5
14148 Date: Wed Mar 21 09:55:01 2007 +0300
14150 Update usage of 'nc' in README.NetConsole
14152 Added information about usage of NetConsole on systems where the -l and -p
14153 switches are mutually exclusive.
14158 commit 31c98a88228021b314c89ebb8104fb6473da4471
14160 Date: Wed Apr 4 02:09:30 2007 +0200
14162 Minor coding style cleanup.
14164 commit 94abd7c0583ebe01e799b25f451201deeaab550d
14166 Date: Wed Apr 4 01:49:15 2007 +0200
14170 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
14172 Date: Tue Apr 3 14:27:18 2007 +0200
14174 Support for the Philips ISP116x HCD (Host Controller Driver)
14178 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
14180 Date: Tue Apr 3 14:27:08 2007 +0200
14182 USB: cleanup monahans usb support. Remove dead code.
14186 commit a65c5768e5537530bd1780af3d3fddc3113a163c
14188 Date: Mon Apr 2 10:09:30 2007 +0200
14190 ppc4xx: Change SysACE address on Katmai
14192 With this new base address of the Xilinx SystemACE controller
14193 the Linux driver will be easier to adapt, since it can now be
14194 mapped via the "normal" ioremap() call.
14198 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
14200 Date: Sat Mar 31 14:30:53 2007 -0400
14202 Fix some minor whitespace violations.
14204 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
14206 Date: Sat Mar 31 12:23:51 2007 -0400
14208 Add a flattened device tree (fdt) command (2 of 2)
14210 Modifications to the existing code to support the new fdt command.
14212 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
14214 Date: Sat Mar 31 12:22:10 2007 -0400
14216 Add a flattened device tree (fdt) command (1 of 2)
14218 The fdt command uses David Gibson's libfdt library to manipulate as well
14219 as print the flattened device tree. This patch is the new command,
14220 the second part is the modifications to the existing code.
14222 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
14224 Date: Sat Mar 31 12:13:43 2007 -0400
14226 libfdt: Enhanced and published fdt_next_tag()
14228 Enhanced the formerly private function _fdt_next_tag() to allow stepping
14229 through the tree, used to produce a human-readable dump, and made
14230 it part of the published interface.
14231 Also added some comments.
14233 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
14235 Date: Sat Mar 31 12:05:39 2007 -0400
14237 libfdt: Customizations for use by u-boot.
14239 Changes to David Gibson's original source to fit into u-boot's
14240 environment. No functionality changes.
14242 commit 35748177c64a4a83a00057e93bb33e40278a2a96
14244 Date: Sat Mar 31 12:00:56 2007 -0400
14246 libfdt: Import libfdt source (2 of 2)
14248 This adds the applicable libfdt source files (unmodified) and a README
14249 to explain where the source came from.
14251 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
14253 Date: Sat Mar 31 11:59:59 2007 -0400
14255 libfdt: Import libfdt source (1 of 2)
14257 This adds the applicable libfdt source files (unmodified) and a README
14258 to explain where the source came from.
14260 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
14262 Date: Sat Mar 31 13:16:23 2007 +0200
14264 ppc4xx: Update Katmai bootstrap command
14266 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
14271 commit cabee756a6532986729477c3cc1ea16ef8517ad2
14273 Date: Sat Mar 31 13:15:06 2007 +0200
14275 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
14277 Additional RAM information is now printed upon powerup, like
14278 DDR2 frequency and CAS latency.
14282 commit 60723803431ac75cad085690789e433d5ab9174e
14284 Date: Sat Mar 31 08:48:36 2007 +0200
14286 ppc4xx: Change Yucca config file to support ECC
14288 With the updated 44x DDR2 driver the Yucca board now supports
14289 ECC generation and checking.
14293 commit 490e5730c674b20d708b783a2c5ffd7208f83873
14295 Date: Sat Mar 31 08:47:34 2007 +0200
14297 ppc4xx: Fix "bootstrap" command for Katmai board
14299 The board specific "bootstrap" command is now fixed and can
14300 be used for the AMCC Katmai board to configure different
14301 CPU/PLB/OPB frequencies.
14305 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
14307 Date: Sat Mar 31 08:46:08 2007 +0200
14309 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
14311 Fix a bug in the auto calibration routine. This driver now runs
14312 more reliable with the tested modules. It's also tested with
14313 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
14317 commit 342cd097be1e7affe82f42ab3da220959a699e64
14319 Date: Fri Mar 30 22:52:09 2007 +0200
14321 [PATCH] Clean include dependence
14323 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
14325 Date: Fri Mar 30 22:42:45 2007 +0200
14327 [CLEAN] Remove inefficient Suzaku code
14329 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
14331 Date: Wed Mar 28 15:03:16 2007 +0200
14333 Merge some AMCC make targets to keep the top-level Makefile smaller
14337 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
14339 Date: Wed Mar 28 14:52:12 2007 +0200
14341 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
14343 The "old" i2c commands (iprobe, imd...) are now compiled in again,
14344 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
14349 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
14351 Date: Tue Mar 27 00:32:16 2007 +0200
14353 PATCH: Resolve GPL license problem
14355 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
14357 Date: Mon Mar 26 12:03:36 2007 +0200
14359 PXA: pxa27x USB OHCI support
14363 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
14365 Date: Mon Mar 26 11:21:05 2007 +0200
14367 USB: remove the S3C24X0_merge #define, which was introduced while
14368 merging OHCI drivers.
14372 commit 1798049522f594013aea29457d46794298c6ae15
14374 Date: Mon Mar 26 01:39:07 2007 +0200
14376 Support for XUPV2P board
14378 BSP autoconfig support
14380 commit 0d974d5297349504a2ddfa09314be573b5df320a
14382 Date: Sat Mar 24 15:57:09 2007 +0100
14384 [PATCH] Add 4xx GPIO functions
14386 This patch adds some 4xx GPIO functions. It also moves some of the
14387 common code and defines into a common 4xx GPIO header file.
14391 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
14393 Date: Sat Mar 24 15:55:58 2007 +0100
14395 [PATCH] Small Sequoia cleanup
14399 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
14401 Date: Sat Mar 24 15:45:34 2007 +0100
14403 [PATCH] Clean up 40EZ/Acadia support
14405 This patch cleans up all the open issue of the preliminary
14410 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
14412 Date: Tue Dec 12 11:02:20 2006 -0600
14414 Fix 8641HPCN problem with ld version 2.16
14416 (Dot outside sections problem).
14418 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
14422 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
14424 Date: Thu Dec 7 10:35:55 2006 -0600
14426 Set Rev 2.x 86xx PIC in mixed mode.
14428 Prevent false interrupt from hanging Linux as MSR[EE] is set
14429 to enable interrupts by changing the PIC out of the default
14430 pass through mode into mixed mode.
14435 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
14437 Date: Thu Dec 7 10:32:35 2006 -0600
14439 Add flash cmd function to 8641HPCN ramboot
14441 Also fixes some commmand for 8641 HPCN ramboot case.
14446 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
14448 Date: Thu Dec 7 10:34:14 2006 -0600
14450 Add support for 8641 Rev 2 silicon.
14452 Without this patch, I am unable to get to the prompt on rev 2 silicon.
14453 Only set ddrioovcr for rev1.
14458 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
14460 Date: Thu Mar 22 00:13:12 2007 +0100
14462 Code cleanup / re-insert previous Copyright entries.
14466 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
14468 Date: Wed Mar 21 23:26:15 2007 +0100
14470 Code cleanup. Update CHANGELOG
14472 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
14474 Date: Wed Mar 21 14:54:29 2007 +0100
14476 ppc4xx: Fix file mode of include/configs/acadia.h
14480 commit d5f4614c9350d9333e575100fb250aab774d0258
14482 Date: Wed Mar 21 14:41:46 2007 +0100
14484 SPC1920: fix small clock routing bug
14488 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
14490 Date: Wed Mar 21 13:39:57 2007 +0100
14492 [PATCH] Add AMCC Acadia (405EZ) eval board support
14494 This patch adds support for the new AMCC Acadia eval board.
14496 Please note that this Acadia/405EZ support is still in a beta stage.
14497 Still lot's of cleanup needed but we need a preliminary release now.
14501 commit e01bd218b00af73499331a1a701625a852cd286f
14503 Date: Wed Mar 21 13:38:59 2007 +0100
14505 [PATCH] Add AMCC PPC405EZ support
14507 This patch adds support for the new AMCC 405EZ PPC. It is in
14508 preparation for the AMCC Acadia board support.
14510 Please note that this Acadia/405EZ support is still in a beta stage.
14511 Still lot's of cleanup needed but we need a preliminary release now.
14515 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
14517 Date: Wed Mar 21 08:45:17 2007 +0100
14519 [PATCH] TQM8272: dont change the bits given from the HRCW
14520 for the SIUMCR and BCR Register.
14521 Fix the calculation for the EEprom Size
14525 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
14527 Date: Tue Mar 20 18:16:24 2007 +0800
14529 [Blackfin][PATCH] Add BF561 EZKIT board support
14531 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
14533 Date: Mon Mar 19 22:55:58 2007 +0800
14535 [Blackfin][PATCH] minor cleanup
14537 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
14539 Date: Mon Mar 19 13:10:08 2007 +0100
14541 Remove obsoleted POST files.
14545 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
14547 Date: Mon Mar 19 01:26:11 2007 +0800
14549 [PATCH] Add flash chip M29W320ET/B support
14551 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
14553 Date: Mon Mar 19 01:24:52 2007 +0800
14555 [Blackfin][PATCH] Add BF537 stamp board support
14557 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
14559 Date: Fri Mar 16 21:11:42 2007 +0100
14561 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
14563 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
14564 DDR memory are dynamically programmed matching the total size
14565 of the equipped memory (DIMM modules).
14569 commit 76d1466f918b881cda2d259254761e73885093c2
14571 Date: Tue Mar 13 13:38:05 2007 +0100
14573 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
14574 boards in terms of unification.
14578 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
14580 Date: Tue Mar 13 16:05:55 2007 +0100
14582 Make SC3 board build with 'make O='; use 'addcons' consistently
14583 (SC3 and Jupiter used to use 'addcon' instead).
14587 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
14589 Date: Tue Mar 13 09:40:59 2007 +0100
14591 [PATCH] update board config for jupiter Board:
14593 CONFIG_CMDLINE_EDITING,
14594 CFG_ENV_ADDR_REDUND activated
14598 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
14600 Date: Mon Mar 12 12:11:55 2007 +0800
14602 [Blackfin][PATCH] minor cleanup
14604 commit bfa5754a58477ac917d21527cd0f079d87cf188e
14606 Date: Mon Mar 12 01:42:06 2007 +0800
14608 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
14610 commit 8440bb14581a294375c34b91b42512f9753d1130
14612 Date: Mon Mar 12 00:25:14 2007 +0800
14614 [Blackfin][PATCH] code cleanup
14616 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
14618 Date: Sun Mar 11 13:48:24 2007 +0100
14620 [Microblaze][PATCH] part 2
14622 interrupt controller support
14626 board information support
14628 booting image support
14630 adding support for Xilinx ML401
14632 commit 76316a318de91f6184e7c22a10e02d275ade2441
14634 Date: Sun Mar 11 13:42:58 2007 +0100
14636 [Microblaze][PATCH]
14638 interrupt controller support
14642 board information support
14644 booting image support
14646 adding support for Xilinx ML401
14648 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
14650 Date: Sat Mar 10 23:49:29 2007 +0800
14652 [Blackfin][PATCH] code cleanup
14654 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
14656 Date: Fri Mar 9 13:40:56 2007 +0800
14658 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
14660 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
14662 Date: Fri Mar 9 13:38:44 2007 +0800
14664 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
14666 commit 992423ab43c2bcf6b704853bd00af77450915e20
14668 Date: Thu Mar 8 23:00:08 2007 +0100
14670 ppc4xx: Fix file mode of sequoia.c
14674 commit eb92f613556800f7483666db09d9a237ad911d4a
14676 Date: Thu Mar 8 22:52:51 2007 +0100
14680 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
14682 Date: Thu Mar 8 09:39:48 2007 -0600
14684 ppc4xx: Clear Sequoia/Rainier security engine reset bits
14688 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
14690 Date: Thu Mar 8 16:26:52 2007 +0100
14692 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
14696 commit d9fc703246840c4b268debf48c334ba55c597dc0
14698 Date: Thu Mar 8 16:25:47 2007 +0100
14700 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
14704 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
14706 Date: Thu Mar 8 16:23:11 2007 +0100
14708 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
14712 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
14714 Date: Thu Mar 8 16:20:32 2007 +0100
14716 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
14720 commit f9fc6a5852a6335840882fa2111925010eea1abe
14722 Date: Wed Mar 7 15:32:01 2007 +0100
14724 fixed ethernet phy configuration for plu405 board
14728 commit 769104c9356594deb2092e204a39c05b33202d6c
14730 Date: Thu Mar 8 21:49:27 2007 +0100
14734 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
14736 Date: Thu Mar 8 10:13:16 2007 +0100
14738 [PATCH] Update AMCC Luan 440SP eval board support
14740 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
14741 inititializition. This includes DDR auto calibration and support
14742 for different DIMM modules, instead of the fixed setup used in
14743 the earlier version.
14745 This patch also enables the cache in FLASH for the startup
14746 phase of U-Boot (while running from FLASH). After relocating to
14747 SDRAM the cache is disabled again. This will speed up the boot
14748 process, especially the SDRAM setup, since there are some loops
14749 for memory testing (auto calibration).
14753 commit 2f5df47351910a2936c7741cf111855829200943
14755 Date: Thu Mar 8 10:10:18 2007 +0100
14757 [PATCH] Update AMCC Yucca 440SPe eval board support
14759 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
14760 inititializition. This includes DDR auto calibration and support
14761 for different DIMM modules, instead of the fixed setup used in
14762 the earlier version.
14766 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
14768 Date: Thu Mar 8 10:07:18 2007 +0100
14770 ppc4xx: Small AMCC Katmai 440SPe update
14774 commit df294497479b1dca6dd86318b2a912f72fede0df
14776 Date: Thu Mar 8 10:06:09 2007 +0100
14778 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
14782 commit 83853178bd36bca6f0f8f1331476620c84a587fc
14784 Date: Wed Mar 7 12:14:50 2007 -0600
14786 net - Support ping reply when processing net-loop
14788 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
14790 This permits the ping command to test the phy interface when the phy
14791 is put in loopback mode (typically by setting register 0 bit 14).
14793 It also allows the port to respond to an external ping when u-boot is
14794 processing some other net command (such as tftp). This is useful when
14795 tftp appears to hang.
14800 commit fa1aef15bcd47736687be1af544506e90fba545d
14802 Date: Wed Mar 7 16:43:00 2007 +0100
14804 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
14806 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
14807 DDR memory are dynamically programmed matching the total size
14808 of the equipped memory (DIMM modules).
14812 commit e2ebe696818939e2b974628be9c921ea3fe9de13
14814 Date: Wed Mar 7 16:39:36 2007 +0100
14816 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
14818 This patch fixes a problem that occurs when 2 DIMM's are
14819 used. This problem was first spotted and fixed by Gerald Jackson
14821 problem in a little more clever way.
14823 This patch also adds the nice functionality to dynamically
14824 create the TLB entries for the SDRAM (tlb.c). So we should
14825 never run into such problems with wrong (too short) TLB
14826 initialization again on these platforms.
14828 As this feature is new to the "old" 44x SPD DDR driver, it
14829 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
14833 commit 39218433983417b9df087976a79e3f80dd5e83d6
14835 Date: Wed Mar 7 16:33:44 2007 +0100
14837 UC101: fix compiler warnings
14839 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
14841 Date: Wed Mar 7 16:19:46 2007 +0100
14843 HMI1001: fix build error, cleanup compiler warnings.
14845 commit ad5bb451ade552c44bef9119d907929ebc2c126f
14847 Date: Tue Mar 6 18:08:43 2007 +0100
14849 Restructure POST directory to support of other CPUs, boards, etc.
14851 commit a5284efd125967675b2e9c6ef7b95832268ad360
14853 Date: Tue Mar 6 18:01:47 2007 +0100
14855 Fix HOSTARCH handling.
14856 Patch by Mike Frysinger, Mar 05 2007
14858 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
14860 Date: Tue Mar 6 07:47:04 2007 +0100
14862 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
14864 As provided by the AMCC applications team, this patch optimizes the
14865 DDR2 setup for 166MHz bus speed. The values provided are also save
14866 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
14867 setup has to be adjusted as done in this patch.
14869 For this the NAND booting version had to include the "speed.c" file
14870 from the cpu/ppc4xx directory. With this addition the NAND SPL image
14871 will just fit into the 4kbytes of program space. gcc version 4.x as
14872 provided with ELDK 4.x is needed to generate this optimized code.
14876 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
14878 Date: Sun Mar 4 01:36:05 2007 +0100
14882 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
14884 Date: Wed Feb 28 00:02:04 2007 -0600
14886 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
14888 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
14890 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
14892 Date: Tue Feb 27 23:51:42 2007 -0600
14894 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
14896 The config value for:
14904 Were not being used when setting the appropriate register
14907 * CFG_SCCR_USBMPHCM
14912 To allow full config of the SCCR.
14914 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
14915 that were just bogus.
14919 commit d51b3cf371cd441030460ef19d36b2924c361b1a
14921 Date: Thu Feb 22 20:06:57 2007 -0600
14923 mpc83xx: update [local-]mac-address properties on UEC based devices
14925 8360 and 832x weren't updating their [local-]mac-address
14926 properties. This patch fixes that.
14930 commit 61f4f912acbe60776c5e00df1ec94094ce672957
14932 Date: Tue Feb 13 10:41:42 2007 -0600
14934 mpc83xx: write MAC address to mac-address and local-mac-address
14936 Some device trees have a mac-address property, some have local-mac-address,
14937 and some have both. To support all of these device trees, this patch
14938 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
14939 This function already updates local-mac-address.
14943 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
14945 Date: Tue Feb 27 18:41:08 2007 -0600
14947 mpc83xx: add command line editing by default
14949 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
14951 Date: Wed Feb 14 19:50:53 2007 -0600
14953 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
14955 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
14956 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
14958 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
14963 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
14965 Date: Wed Feb 14 18:27:17 2007 +0800
14967 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
14969 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
14970 it pass DDR/DDR2 compliance tests.
14974 commit b110f40bd180c6b560276589beedf753e97c46ce
14976 Date: Wed Feb 14 18:27:06 2007 +0800
14978 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
14980 MPC8360E rev2.0 have new spridr,and PVR value,
14981 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
14985 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
14987 Date: Wed Feb 14 18:26:44 2007 +0800
14989 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
14991 MPC8349E rev3.1 have new spridr,and PVR value,
14992 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
14996 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
14998 Date: Wed Jan 31 11:04:19 2007 +0100
15000 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
15002 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
15003 which is used to se if an slave will ACK after receiving its address.
15005 Correct i2c probing to use this method as the old method could upset
15006 a slave as it wrote a data byte to it.
15008 Add a small delay in i2c_init() to let the controller
15009 shutdown any ongoing I2C activity.
15013 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
15015 Date: Wed Jan 31 15:54:29 2007 -0600
15017 mpc83xx: Add support for the MPC8349E-mITX-GP
15019 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
15020 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
15021 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
15025 commit fab16807adad350f618024350c6950165c247c72
15027 Date: Wed Jan 31 15:54:20 2007 -0600
15029 mpc83xx: Delete sdram_init() for MPC8349E-mITX
15031 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
15032 never does anything. This patch deletes it.
15036 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
15038 Date: Fri Jan 19 10:43:26 2007 +0800
15040 mpc83xx: Fix the LAW1/3 bug
15042 The patch solves the alignment problem of the local bus access windows to
15043 render accessible the memory bank and PHY registers of UPC 1 (starting at
15044 0xf801 0000). What we actually did was to adjust the sizes of the bus
15045 access windows so that the base address alignment requirement would be met.
15051 commit 97c4b397dce236a7318b304667bf89e59d08b17c
15053 Date: Tue Jan 30 16:15:31 2007 -0600
15055 mpc83xx: don't hang if watchdog configured on 8360, 832x
15057 don't hang if watchdog configured on 8360, 832x
15059 The watchdog programming model is the same across all 83xx devices;
15060 make the code reflect that.
15062 commit b70047478570e371ce7223be342ce98afea0f7d6
15064 Date: Tue Jan 30 16:15:21 2007 -0600
15066 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
15068 protect memcpy to bad address if a local-mac-address is missing from dt
15070 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
15072 Date: Tue Jan 30 16:15:04 2007 -0600
15074 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
15076 make 8360 default environment fdt be 8360 (not 8349)
15078 commit a28899c910024a0226331df07207b1038c300c93
15080 Date: Tue Jan 30 16:14:50 2007 -0600
15082 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
15084 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
15085 be used for busy-waiting since it strips the 'volatile' property from
15086 the bd variable. gcc3 was working by pure luck.
15088 This is a follow on patch to "Fix the UEC driver bug of QE"
15090 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
15092 Date: Tue Jan 30 14:08:30 2007 -0600
15094 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
15096 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
15097 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
15098 CONFIG_MPC834X so they are more generic.
15102 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
15104 Date: Thu Jan 25 13:40:55 2007 -0600
15106 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
15108 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
15110 Date: Wed Jan 24 17:18:37 2007 -0600
15112 mpc83xx: sort Makefile targets
15114 reordered targets alphabetically
15116 commit 91e25769771c1164ed63ffca0add49f934ae3343
15118 Date: Tue Jan 16 11:38:14 2007 -0500
15120 mpc83xx: U-Boot support for Wind River SBC8349
15122 I've redone the SBC8349 support to match git-current, which
15123 incorporates all the MPC834x updates from Freescale since the 1.1.6
15124 release, including the DDR changes.
15126 I've kept all the SBC8349 files as parallel as possible to the
15127 MPC8349EMDS ones for ease of maintenance and to allow for easy
15128 inspection of what was changed to support this board. Hence the SBC8349
15129 U-Boot has FDT support and everything else that the MPC8349EMDS has.
15131 Fortunately the Freescale updates added support for boards using CS0,
15132 but I had to change spd_sdram.c to allow for board specific settings for
15133 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
15134 default if the board doesn't specify a value.)
15136 Hopefully this should be mergeable as-is and require no whitespace
15137 cleanups or similar, but if something doesn't measure up then let me
15138 know and I'll fix it.
15143 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
15145 Date: Thu Dec 14 19:03:21 2006 +0800
15147 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
15149 A redundant semicolon existed in mpc8349itx.c
15154 commit f35f358241c549be3f75cfe2eaa642914275b7ba
15156 Date: Wed Dec 6 21:23:55 2006 -0500
15158 mpc83xx: Put the version (and magic) after the HRCW.
15160 Put the version (and magic) after the HRCW. This puts it in a fixed
15161 location in flash, not at the start of flash but as close as we can get.
15165 commit 48aecd969171a6e99a55fae04933857787f9a5bd
15167 Date: Thu Dec 7 21:14:51 2006 +0800
15169 mpc83xx: Add the MPC832XEMDS board readme
15171 Add the MPC832XEMDS board readme
15175 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
15177 Date: Thu Dec 7 21:13:15 2006 +0800
15179 mpc83xx: Add support for the MPC832XEMDS board
15181 This patch supports DUART, ETH3/4 and PCI etc.
15185 commit e080313c32322e15ab5a18eb896a252858c57284
15187 Date: Thu Dec 7 21:11:58 2006 +0800
15189 mpc83xx: streamline the 83xx immr head file
15191 For better format and style, I streamlined the 83xx head files,
15192 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
15193 duplicated macro definition appear in the both files; 2) the structure
15194 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
15195 macro definition put inside the each structure. So, I cleaned up the
15196 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
15197 moved the macro definition to mpc83xx.h, Just like MPC8260.
15201 *streamline the 83xx immr head file
15205 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
15207 Date: Wed Dec 6 11:38:17 2006 +0800
15209 mpc83xx: Fix the UEC driver bug of QE
15211 The patch prevents the GCC tool chain from striping useful code for
15212 optimization. It will make UEC ethernet driver workable, Otherwise the
15213 UEC will fail in tx when you are using gcc4.x. but the driver can work
15214 when using gcc3.4.3.
15218 *Prevent the GCC from striping code for optimization, Otherwise the UEC
15219 will tx failed when you are using gcc4.x.
15223 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
15225 Date: Thu Mar 1 21:11:36 2007 +0100
15227 [PATCH] Update AMCC Katmai 440SPe eval board support
15229 This patch updates the recently added Katmai board support. The biggest
15230 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
15233 Please note, that still some problems are left with some memory
15234 configurations. See the driver for more details.
15238 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
15240 Date: Thu Mar 1 07:03:25 2007 +0100
15242 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
15246 commit ccbc7036648e465697ca298ba51e0e76dda352a0
15248 Date: Wed Feb 28 01:28:53 2007 +0100
15250 SC3: fix typo in default environment
15252 commit e344568b1b46af85ec32d815586f91bc115d6223
15254 Date: Tue Feb 27 20:15:30 2007 +0300
15256 MCC200: Fixes for update procedure
15258 - fix logic error in image type handling
15259 - make sure file system images (cramfs etc.) get stored in flash
15260 with image header stripped so they can be mounted through MTD
15262 commit 743571145b37182757d4e688a77860b36ee77573
15264 Date: Tue Feb 27 14:26:04 2007 +0100
15266 Minor code cleanup.
15268 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
15270 Date: Tue Feb 27 12:40:16 2007 +0300
15272 MCC200 update - add LCD Progress Indicator
15274 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
15276 Date: Thu Feb 22 07:43:34 2007 +0100
15278 [PATCH] get_dev() now unconditionally uses manual relocation
15280 Since the relocation fix is not included yet and we're not sure how
15281 it will be added, this patch removes code that required relocation
15282 to be fixed for now.
15286 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
15288 Date: Thu Feb 22 07:40:23 2007 +0100
15290 [PATCH] Change systemace driver to select 8 & 16bit mode
15292 As suggested by Grant Likely this patch enables the Xilinx SystemACE
15293 driver to select 8 or 16bit mode upon startup.
15297 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
15299 Date: Wed Feb 21 16:52:31 2007 +0100
15301 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
15303 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
15304 is fully finished. The sync() is defined in each CPU's io.h file. For
15305 those CPUs which do not need sync for now, a dummy sync() is defined in
15306 their io.h as well.
15310 commit da04995c7dc6772013a9a0dc5c767f190c402478
15312 Date: Wed Feb 21 13:44:34 2007 +0100
15314 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
15318 commit 751bb57107d78978ae08e697c3deba816f5be091
15320 Date: Tue Feb 20 13:21:57 2007 +0100
15322 [PATCH] Fix relocation problem with "new" get_dev() function
15324 This patch enables the "new" get_dev() function for block devices
15325 introduced by Grant Likely to be used on systems that still suffer
15326 from the relocation problems (manual relocation neede because of
15327 problems with linker script).
15329 Hopefully we can resolve this relocation issue soon for all platform
15330 so we don't need this additional code anymore.
15334 commit d93e2212f962668b3dce091ff5edc33f2347fe37
15336 Date: Tue Feb 20 13:17:42 2007 +0100
15338 [PATCH] Update SystemACE driver for 16bit access
15340 This patch removes some problems when the Xilinx SystemACE driver
15341 is used with 16bit access on an big endian platform (like the
15346 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
15348 Date: Tue Feb 20 13:15:40 2007 +0100
15350 [PATCH] Clean up Katmai (440SPe) linker script
15354 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
15356 Date: Tue Feb 20 10:57:08 2007 +0100
15358 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
15362 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
15364 Date: Tue Feb 20 10:51:26 2007 +0100
15366 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
15368 This patch switches to the desired I2C bus when the date/dtt
15369 commands are called. This can be configured using the
15370 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
15374 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
15376 Date: Tue Feb 20 10:43:34 2007 +0100
15378 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
15380 This patch adds support for the DDR2 controller used on the
15381 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
15382 board and works fine with the following DIMM modules:
15384 - Corsair CM2X512-5400C4 (512MByte per DIMM)
15385 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
15386 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
15388 This patch also adds the nice functionality to dynamically
15389 create the TLB entries for the SDRAM (tlb.c). So we should
15390 never run into such problems with wrong (too short) TLB
15391 initialization again on these platforms.
15395 commit 36d830c9830379045f5daa9f542ac1c990c70068
15397 Date: Tue Feb 20 10:35:42 2007 +0100
15399 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
15401 Since the existing 4xx SPD SDRAM initialization routines for the
15402 405 SDRAM controller and the 440 DDR controller don't have much in
15403 common this patch splits both drivers into different files.
15405 This is in preparation for the 440 DDR2 controller support (440SP/e).
15409 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
15411 Date: Tue Feb 20 10:27:08 2007 +0100
15413 [PATCH] PPC4xx: Add support for multiple I2C busses
15415 This patch adds support for multiple I2C busses on the PPC4xx
15416 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
15417 to make use of this feature.
15419 It also merges the 405 and 440 i2c header files into one common
15422 Also the 4xx i2c reset procedure is reworked since I experienced
15423 some problems with the first access on the 440SPe Katmai board.
15427 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
15429 Date: Tue Feb 20 09:05:45 2007 +0100
15431 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
15433 Block device read/write is anonymous data; there is no need to use a
15434 typed pointer. void * is fine. Also add a hook for block_read functions
15438 commit 53758fa20e935cc87eeb0519ed365df753a6f289
15440 Date: Tue Feb 20 09:05:38 2007 +0100
15442 [PATCH 8_9] Add block_write hook to block_dev_desc_t
15444 Preparation for future patches which support block device writing
15448 commit f4852ebe6ca946a509667eb68be42026f837be76
15450 Date: Tue Feb 20 09:05:31 2007 +0100
15452 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
15454 Register read/write does not need to be wrapped in a full function. The
15455 patch replaces them with macros.
15459 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
15461 Date: Tue Feb 20 09:05:23 2007 +0100
15463 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
15465 The code in this file is not a command; it is a device driver. Put it in
15466 the correct place. There are zero functional changes in this patch, it
15467 only moves the file.
15471 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
15473 Date: Tue Feb 20 09:05:16 2007 +0100
15475 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
15477 This patch is in preparation of additional changes to the sysace driver.
15478 May as well take this opportunity to fixup the inconsistent whitespace since
15479 this file is about to undergo major changes anyway.
15481 There are zero functional changes in this patch. It only cleans up the
15486 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
15488 Date: Tue Feb 20 09:05:07 2007 +0100
15490 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
15492 isprint is already defined in ctype.c
15496 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
15498 Date: Tue Feb 20 09:05:00 2007 +0100
15500 [PATCH 3_9] Move buffer print code from md command to common function
15502 Printing a buffer is a darn useful thing. Move the buffer print code
15503 into print_buffer() in lib_generic/
15507 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
15509 Date: Tue Feb 20 09:04:52 2007 +0100
15511 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
15513 Change the xilinx device drivers and board code to include config.h
15514 instead of xparameters.h directly. config.h always includes the
15515 correct xparameters file. This change reduces the posibility of
15516 including the wrong file when adding a new xilinx board port
15520 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
15522 Date: Tue Feb 20 09:04:34 2007 +0100
15524 [PATCH 1_4] Merge common get_dev() routines for block devices
15526 Each of the filesystem drivers duplicate the get_dev routine. This change
15527 merges them into a single function in part.c
15531 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
15533 Date: Mon Feb 19 23:09:51 2007 +0100
15535 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
15536 as root file system images.
15538 commit 489c696ae7211218961d159e43e722d74c36fcbc
15540 Date: Wed Feb 14 14:30:28 2007 +0300
15542 MCC200: Extensions to Software Update Mechanism
15544 Update / extend Software Update Mechanism for MCC200 board:
15546 - Add support for rootfs image added. The environment variables
15547 "rootfs_st" and "rootfs_nd" can be used to override the default
15548 values of the image start and end.
15549 - Remove excessive key check code.
15552 commit 4be23a12f23f1372634edc3215137b09768b7949
15554 Date: Mon Feb 19 08:23:15 2007 +0100
15556 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
15558 As spotted by Matthias Fuchs, the READY input should not be
15559 enabled for the NOR FLASH on the Sequoia board.
15563 commit 2605e90bf676d48123afe5719a846d2b52b24aac
15565 Date: Fri Feb 16 07:57:42 2007 +0100
15567 [PATCH] Added support for the jupiter board.
15571 commit 497d012e5be0194e1084073d0081eb1a844796b2
15573 Date: Mon Feb 12 13:11:50 2007 +0100
15575 LPC2292: patch from Siemens.
15577 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
15579 Date: Sat Feb 10 08:49:31 2007 +0100
15581 [PATCH] Add missing p3mx.h file to repository (ups)
15585 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
15587 Date: Fri Feb 9 10:45:42 2007 +0100
15589 [Motion-PRO] Preliminary support for the Motion-PRO board.
15591 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
15593 Date: Wed Feb 7 16:51:08 2007 +0100
15595 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
15597 Some boards that can have more than 768MBytes of SDRAM need to
15598 set "initrd_high", so that the initrd can be accessed by the
15603 commit 7372ca68227930d03cffa548310524cad5b96733
15605 Date: Fri Feb 2 12:44:22 2007 +0100
15607 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
15609 Previously the strapping DCR/SDR was read to determine if the internal PCI
15610 arbiter is enabled or not. This strapping bit can be overridden, so now
15611 the current status is read from the correct DCR/SDR register.
15615 commit 2aa54f651a42d198673318f07a20c89a43e4d197
15617 Date: Fri Feb 2 12:42:08 2007 +0100
15619 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
15623 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
15625 Date: Thu Feb 1 13:22:41 2007 +0100
15627 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
15629 When PCI PNP is enabled the pci pnp configuration routine is called
15630 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
15631 problems with some PCI cards. For now disable the PCI PNP configuration.
15635 commit 2902fadade3be7659467e8d074048c6b7068f5c0
15637 Date: Wed Jan 31 16:56:10 2007 +0100
15639 [PATCH] Update 440EPx/440GRx cpu detection
15643 commit d5ea287b02a6945c3977410e364a879dd1a555c8
15645 Date: Wed Jan 31 16:38:04 2007 +0100
15647 [PATCH] Update esd cpci5200 files
15651 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
15653 Date: Wed Jan 31 16:37:34 2007 +0100
15655 [PATCH] Add support for esd mecp5200 board
15659 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
15661 Date: Wed Jan 31 12:38:50 2007 +0100
15663 [PATCH] Remove unneccessary yellowstone board config file
15667 commit e802594b6fa1b166308820c276b96dc0d7cc731c
15669 Date: Tue Jan 30 17:06:10 2007 +0100
15671 [PATCH] Update Sequoia (440EPx) config file
15673 The config file now handles the 2nd target, the Rainier (440GRx)
15674 evaluation board better. Additionally the PPC input clock was
15675 adjusted to match the correct value of 33.0 MHz.
15679 commit 700200c67e73b83751418abe7815840dca8fd6cb
15681 Date: Tue Jan 30 17:04:19 2007 +0100
15683 [PATCH] Merge Yosemite & Yellowstone board ports
15685 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
15686 share one config file and all board specific files. This way we
15687 don't have to maintain two different sets of files for nearly
15692 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
15694 Date: Tue Jan 30 15:01:49 2007 +0100
15696 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
15698 SCPU doesn't use redundant environment in flash.
15702 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
15704 Date: Tue Jan 30 12:51:07 2007 +0100
15706 [PATCH] alpr: Update alpr board config file
15710 commit f8db84f132b1e335f20f96138a1f09ed97b08664
15712 Date: Tue Jan 30 00:50:40 2007 +0100
15714 LPC2292 SODIMM port coding style cleanup.
15716 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
15718 Date: Wed Jan 24 12:16:56 2007 +0100
15720 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
15722 commit 2daf046ba627f85f44195815778140039636244e
15724 Date: Tue Jan 23 17:22:06 2007 +0100
15726 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
15728 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
15730 Date: Tue Jan 23 14:21:14 2007 +0100
15732 [iDMR] Flash driver on initialisation write-protects some sectors,
15733 currently sectors 0-3. Sector 3 does not need to be protected, though
15734 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
15735 fixes this, i.e., only sectors 0-2 are protected.
15737 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
15739 Date: Tue Jan 23 14:11:22 2007 +0100
15741 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
15742 "mii device" results in "Unexpected exception"). Fixing this properly
15743 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
15744 this commit disables MII commads for now.
15746 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
15748 Date: Tue Jan 23 13:25:22 2007 +0100
15750 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
15751 Identification Register (CIR).
15753 commit fdef388758506765d4d6a7155c8f1584c63ff581
15755 Date: Mon Jan 22 13:19:21 2007 +0800
15757 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
15759 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
15762 commit a4012396645533aef218354eeba754dff0deace8
15764 Date: Fri Jan 19 23:08:39 2007 +0100
15766 Minor code cleanup.
15768 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
15770 Date: Fri Jan 19 19:57:10 2007 +0100
15772 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
15776 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
15778 Date: Fri Jan 19 18:05:26 2007 +0100
15780 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
15781 if you must swap the bytes between reading/writing.
15782 (Needed for the SC3 board)
15786 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
15788 Date: Thu Jan 18 16:05:47 2007 +0100
15790 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
15794 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
15796 Date: Thu Jan 18 11:54:52 2007 +0100
15798 [PATCH] Update Prodrive P3Mx support
15802 commit 34167a36c29ee946b727465db5c014746a08e978
15804 Date: Thu Jan 18 11:48:10 2007 +0100
15806 [PATCH] Add missing Taishan config file
15810 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
15812 Date: Thu Jan 18 11:28:51 2007 +0100
15814 [PATCH] Fix: Compilerwarnings for SC3 board.
15815 The EBC Configuration Register is now by CFG_EBC_CFG definable
15816 Added JFFS2 support for the SC3 board.
15820 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
15822 Date: Thu Jan 18 10:25:34 2007 +0100
15824 [PATCH] Add support for AMCC Taishan PPC440GX eval board
15828 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
15830 Date: Tue Jan 16 18:30:50 2007 +0100
15832 Raname solidcard3 into sc3; add redundant env for sc3
15834 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
15836 Date: Tue Jan 16 12:46:35 2007 +0100
15838 Update default environment for Solidcard3
15840 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
15842 Date: Mon Jan 15 09:46:29 2007 +0100
15844 [PATCH] Fix 440SPe rev B detection from previous patch
15848 commit a443d31410c571ee8f970da819a44d698fdd6b1f
15850 Date: Sun Jan 14 13:35:31 2007 +0100
15852 [FIX] correct I2C Writes for the LM81 Sensor.
15856 commit 0bba5452835f19a61204edcda3a58112fd8e2208
15858 Date: Sat Jan 13 11:17:10 2007 +0100
15860 Undo commit 3033ebb2: reset command does not take any arguments
15862 Haiying Wang's modification to the reset command was broken, undo it.
15866 commit 95981778cff0038fd9941044d6a3eda810e33258
15868 Date: Sat Jan 13 08:01:03 2007 +0100
15870 [PATCH] Update 440SP(e) cpu revisions
15872 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
15876 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
15878 Date: Sat Jan 13 07:59:56 2007 +0100
15880 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
15882 Now the board revision and the current PCI bus speed are printed after
15885 Also the EBC initialising is now done via defines in the board config
15890 commit 36adff362c2c0141ff8a810d42a7e478f779130f
15892 Date: Sat Jan 13 07:59:19 2007 +0100
15894 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
15896 Now the board revision and the current PCI bus speed are printed after
15899 Also the EBC initialising is now done via defines in the board config
15904 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
15906 Date: Sat Jan 13 07:57:51 2007 +0100
15908 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
15910 Now the board revision and the current PCI bus speed are printed after
15915 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
15917 Date: Thu Jan 11 15:44:44 2007 +0100
15919 Added support for the SOLIDCARD III board from Eurodesign
15923 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
15925 Date: Wed Jan 10 14:41:14 2007 +0100
15927 Adjusted default environment for cam5200 board.
15929 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
15931 Date: Wed Jan 10 15:35:52 2007 +0100
15935 commit 787fa15860a57833e50bd30555079a9cd4e519b8
15937 Date: Wed Jan 10 01:28:39 2007 +0100
15939 Fix auto_update for MCC200 board.
15941 The invocation of do_auto_update() is moved to the end of the
15942 misc_init_r() function, after the flash mappings have been
15943 initialized. Please find attached a patch that implements that
15946 Also correct the decoding of the keypad status. With this update, the
15947 key that will trigger the update is Column 2, Row 2.
15949 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
15951 Date: Wed Jan 10 00:26:15 2007 +0100
15953 CAM5200 flash driver modifications:
15954 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
15955 - add second build target 'cam5200_niosflash' which still uses custom driver
15957 commit 67fea022fa957f59653b5238c7496f80a6b70432
15959 Date: Tue Jan 9 16:02:48 2007 +0100
15961 SPC1920: cleanup memory contoller setup
15963 commit 8fc2102faa23593c80381437c09f7745a14deb40
15965 Date: Tue Jan 9 14:57:14 2007 +0100
15967 Fix the cpu speed setup to work with all boards.
15969 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
15971 Date: Tue Jan 9 14:57:13 2007 +0100
15973 SPC1920: add support for the FM18L08 Ramtron FRAM
15975 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
15977 Date: Tue Jan 9 14:57:13 2007 +0100
15979 SPC1920: update the HPI register addresses to work with the second
15980 generation of hardware
15982 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
15984 Date: Tue Jan 9 14:57:13 2007 +0100
15986 Miscellanious spc1920 related cleanups
15988 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
15990 Date: Tue Jan 9 14:57:12 2007 +0100
15992 SPC1920 GO/NOGO led should be set to color red in U-Boot
15994 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
15996 Date: Tue Jan 9 14:57:12 2007 +0100
15998 Add support for the DS3231 RTC
16000 commit 8139567b60d678584b05f0718a681f2047c5e14f
16002 Date: Tue Jan 9 14:57:11 2007 +0100
16004 SMC1 uses external CLK4 instead of BRG on spc1920
16006 commit d8d9de1a02fbd880b613d607143d1f57342affc7
16008 Date: Tue Jan 9 14:57:10 2007 +0100
16010 Update the SPC1920 CMB PLD driver
16012 commit 3f34f869162750e5e999fd140f884f5de952bcfe
16014 Date: Tue Jan 9 14:57:10 2007 +0100
16016 Add / enable I2C support on the spc1920 board
16018 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
16020 Date: Tue Jan 9 14:57:10 2007 +0100
16022 Add support for the tms320671x host port interface (HPI)
16024 commit f4eb54529bb3664c3a562e488b460fe075f79d67
16026 Date: Sun Jan 7 00:13:11 2007 +0100
16028 Prepare for release 1.2.0
16030 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
16032 Date: Sat Jan 6 15:58:09 2007 +0100
16034 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
16036 This patch fixes a problem with an incorrect setup for the refresh
16037 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
16041 commit f16c1da9577f06c5fc08651a4065537407de4635
16043 Date: Sat Jan 6 15:56:13 2007 +0100
16045 [PATCH] Update ALPR board files
16047 This update brings the ALPR board support to the newest version.
16048 It also fixes a problem with the NAND driver.
16052 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
16054 Date: Fri Jan 5 11:46:05 2007 +0100
16056 [PATCH] nand: Fix problem with oobsize calculation
16060 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
16061 returns a 0x15. In the code fragment below bits [1:0] determine the
16062 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
16063 next field is also ANDed with 0x3. However this is a one bit field
16064 as defined in the Hynix and Samsung parts in the 4th ID byte that
16065 determins the oobsize, not a two bit field. It works on Samsung as
16066 bits[3:2] are 01. However for the Hynix there is a 11 in these two
16067 bits, so the oob size gets messed up.
16069 I checked the correct linux code and the suggested fix from Brian is
16070 also available in the linux nand mtd driver.
16074 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
16076 Date: Fri Jan 5 10:40:36 2007 +0100
16078 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
16080 This fix will make the MAL burst disabling patch for the Linux
16081 EMAC driver obsolete.
16085 commit 023889838282b6237b401664f22dd22dfba2c066
16087 Date: Fri Jan 5 10:38:05 2007 +0100
16089 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
16091 This code will optimize the DDR2 controller setup on a board specific
16094 Note: This code doesn't work right now on the NAND booting image for the
16095 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
16099 commit cce4acbb68398634b8d011ed7bb0d12269c84230
16101 Date: Thu Dec 28 19:08:21 2006 +0100
16104 - fix a typo in V38B config file
16105 - move watchdog initialisation earlier in the boot process
16106 - add "wdt=off" to default kernel command line (disables kernel watchdog)
16108 commit 92eb729bad876725aeea908d2addba0800620840
16110 Date: Wed Dec 27 01:26:13 2006 +0100
16112 Fix bug in adaption of Stefano Babic's CFI driver patch.
16114 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
16116 Date: Sun Dec 24 01:42:57 2006 +0100
16118 Minor code cleanup.
16120 commit d784fdb05900ada3686d5778783e1fb328e9fb66
16122 Date: Tue Dec 12 00:22:42 2006 +0100
16124 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
16126 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
16128 Date: Fri Dec 22 14:29:40 2006 +0100
16130 [PATCH] Fix sequoia flash autodetection (finally correct)
16132 Now 32MByte and 64MByte FLASH is know to work and other
16133 configurations should work too.
16137 commit 82e5236a8b719543643fd26d5827938ab2b94818
16139 Date: Fri Dec 22 10:30:26 2006 +0100
16141 Minor code cleanup; update CHANGELOG.
16143 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
16145 Date: Thu Dec 21 17:17:02 2006 +0100
16147 Added support for the TQM8272 board from TQ
16151 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
16153 Date: Thu Dec 21 16:14:48 2006 +0100
16155 [PATCH] Add support for the UC101 board from MAN.
16159 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
16161 Date: Wed Dec 20 00:29:43 2006 +0100
16163 Fix to make the baudrate changes immediate for the MCF52x2 family.
16165 commit daa6e418bcc0c717752e8de939c213c790286096
16167 Date: Wed Dec 20 00:27:32 2006 +0100
16169 Preliminary support for the iDMR board (ColdFire).
16171 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
16173 Date: Fri Dec 8 16:23:08 2006 +0100
16175 automatic update mechanism
16177 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
16179 Date: Mon Dec 4 17:56:59 2006 +0800
16181 Slight code clean up.
16182 Add comments, delete duplicate define and remove spaces.
16185 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
16187 Date: Mon Dec 4 17:54:21 2006 +0800
16189 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
16190 multiplier table can not refect the real PLL clock behavior of these
16191 processors. Please refer to the hardware specification for detailed
16192 information of the corresponding processors.
16195 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
16197 Date: Mon Dec 4 14:46:23 2006 +0800
16199 Remove the static MAC address, ip address, server ip, netmask and
16200 gateway ip for network setting.
16203 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
16205 Date: Mon Dec 4 14:33:08 2006 +0800
16207 Remove the duplicate memory test code for mpc744ihpc2 board.
16208 If a memory test is needed, please use the functions in
16209 post/memory.c or memtest command.
16212 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
16214 Date: Fri Dec 1 19:01:25 2006 +0800
16216 Fix the exception occuring in RAM table search issue.
16217 The original search_one_table() function code can only processes the search
16218 for the exception occurring in FLASH/ROM, because the exception and fixup
16219 table usually locate in FLASH. If the exception address is also in
16220 FLASH, it will be OK.
16221 If the exception occurs in RAM, after the u-boot relocation, a
16222 relocation offset should be added.
16224 clean up the code in cpu/74xx_7xx/cpu.c
16228 commit ee311214e0d216f904feea269599d0934bf71f23
16230 Date: Fri Dec 1 11:47:36 2006 +0800
16232 Clean up the code according to codestyle:
16233 (1) remove some C++ comments.
16234 (2) remove trailing white space.
16235 (3) remove trailing empty line.
16236 (4) Indentation by table.
16237 (5) remove {} in one line condition.
16238 (6) add space before '(' in function call.
16239 Remove some weird printf () output.
16240 Add necessary comments.
16241 Modified Makefile to support building in a separate directory.
16243 commit dd520bf314c7add4183c5191692180f576f96b60
16245 Date: Thu Nov 30 18:02:20 2006 +0100
16249 commit 8d9a8610b8256331132227e9e6585c6bd5742787
16251 Date: Thu Nov 30 01:54:07 2006 +0100
16253 Code cleanup. Update CHANGELOG.
16255 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
16257 Date: Wed Nov 29 16:23:42 2006 +0100
16259 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
16261 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
16262 not the XLB frequency.
16264 This patch depends on the previous patches for MPC52xx device tree support
16269 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
16271 Date: Wed Nov 29 15:42:37 2006 +0100
16273 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
16275 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
16276 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
16277 quite similar and share the same board directory "prodrive/p3mx"
16278 and the same config file "p3mx.h".
16282 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
16284 Date: Wed Nov 29 12:53:15 2006 +0100
16286 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
16288 In the bootvx command the load address was only read from the env
16289 variable "loadaddr" and not optionally passed as paramter as described
16290 in the help. This is fixed with this patch. The behaviour is now the
16291 same as in the bootelf command.
16295 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
16297 Date: Wed Nov 29 12:03:57 2006 +0100
16299 [PATCH] include/ppc440.h minor error affecting interrupts
16301 Fixed include/ppc440.c for UIC address Bug
16303 Corrects bug affecting the addresses for the universal interrupt
16304 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
16309 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
16311 Date: Tue Nov 28 16:17:27 2006 -0600
16313 Make fsl-i2c not conflict with SOFT I2C
16317 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
16319 Date: Tue Nov 28 16:17:18 2006 -0600
16321 Fix I2C master address initialization.
16325 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
16327 Date: Tue Nov 28 23:31:19 2006 -0600
16329 Assign maintainers for mpc8349emds and mpc8360emds
16331 Dave for mpc8360emds, and me for mpc8349emds.
16333 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
16335 Date: Tue Nov 28 23:28:33 2006 -0600
16337 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
16339 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
16340 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
16342 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
16344 Date: Tue Nov 28 12:09:35 2006 -0600
16346 mpc83xx: Miscellaneous code style fixes
16348 Implement various code style fixes and similar changes.
16352 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
16354 Date: Tue Nov 28 17:55:49 2006 +0100
16356 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
16358 This patch adds the code and configuration necessary to boot with an
16359 arch/powerpc Linux kernel.
16364 commit e732faec95a83cb468b4850ae807c8301dde8f6a
16366 Date: Tue Nov 28 16:09:24 2006 +0100
16368 [PATCH] PPC4xx: 440SP Rev. C detection added
16372 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
16374 Date: Tue Nov 28 11:04:45 2006 +0100
16376 [PATCH] nand: Fix patch merge problem
16380 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
16382 Date: Tue Nov 28 11:04:45 2006 +0100
16384 [PATCH] nand: Fix patch merge problem
16388 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
16390 Date: Mon Nov 27 22:53:53 2006 +0100
16394 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
16396 Date: Mon Nov 27 17:43:25 2006 +0100
16398 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
16400 Patch below corrects the setting of the zmiifer register, it was
16401 overwritting the register rather than ORing the settings.
16406 commit d1a72545296800b7e219f93104ad5836f0003d66
16408 Date: Mon Nov 27 17:34:10 2006 +0100
16410 [PATCH] Select NAND embedded environment from board configuration
16412 The current NAND Bootloader setup forces the environment
16413 variables to be in line with the bootloader. This change
16414 enables the configuration to be made in the board include
16415 file instead so that it can be individually enabled.
16420 commit 15784862857c3c2214498defcfed84ff137fb81e
16422 Date: Mon Nov 27 17:22:19 2006 +0100
16424 [PATCH] nand_wait() timeout fixes
16426 Two fixes for the nand_wait() function in
16427 drivers/nand/nand_base.c:
16429 1. Use correct timeouts. The original timeouts in Linux
16430 source are 400ms and 20ms not 40s and 20s
16432 2. Return correct error value in case of timeout. 0 is
16438 commit da5553b095bf04f4f109ad7e565dae3aba47b230
16440 Date: Mon Nov 27 17:04:06 2006 +0100
16442 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
16444 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
16445 arguments to bootm. It removes the getenv("disable_of") test that used
16446 to be used for this purpose.
16451 commit a9398e018593782c5fa7d0741955fc1256b34c1e
16453 Date: Mon Nov 27 15:32:42 2006 +0100
16455 Minor code cleanup. Update CHANGELOG.
16457 commit 1729b92cde575476684bffe819d0b7791b57bff2
16459 Date: Mon Nov 27 14:52:04 2006 +0100
16461 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
16465 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
16467 Date: Mon Nov 27 14:49:51 2006 +0100
16469 [PATCH] alpr: remove unused board specific flash driver
16473 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
16475 Date: Mon Nov 27 14:48:41 2006 +0100
16477 [PATCH] 4xx: Fix problem with board specific reset code
16481 commit ec0c2ec725aec9524a177a77ce75559e644a931a
16483 Date: Mon Nov 27 14:46:06 2006 +0100
16485 [PATCH] Remove testing 4xx enet PHY setup
16489 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
16491 Date: Mon Nov 27 14:12:17 2006 +0100
16493 [PATCH] Update Prodrive ALPR board support (440GX)
16497 commit 58b485776698c3d71ec5a215e392123b4c15afa3
16499 Date: Mon Nov 27 11:51:21 2006 +0100
16501 Add a small README with information on the generic ohci driver.
16503 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
16505 Date: Mon Nov 27 11:46:46 2006 +0100
16507 Fix some endianness issues related to the generic ohci driver
16509 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
16511 Date: Mon Nov 27 11:44:58 2006 +0100
16513 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
16514 to choose between the old and the generic OHCI drivers.
16516 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
16518 Date: Mon Nov 27 11:43:09 2006 +0100
16520 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
16521 and adapted board configs TQM5200 and yosemite accordingly. This commit
16522 also makes the maximum number of root hub ports configurable
16523 (CFG_USB_OHCI_MAX_ROOT_PORTS).
16525 commit 78d620ebb5871d252270dedfad60c6568993b780
16527 Date: Thu Nov 23 22:58:58 2006 +0100
16529 Updates for TQM5200 modules:
16530 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
16531 - simplify "udate" definitions
16533 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
16535 Date: Wed Nov 22 13:20:50 2006 +0100
16537 [PATCH] PPC4xx start.S: Fix for processor errata
16539 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
16540 errata 1.12: 440_33 by moving patch up in code.
16545 commit 4ef6251403f637841000e0fef9e832aa01339822
16547 Date: Mon Nov 20 20:39:52 2006 +0100
16549 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
16553 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
16555 Date: Mon Nov 20 10:28:30 2006 +0100
16559 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
16561 Date: Mon Nov 13 13:55:24 2006 +0100
16563 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
16565 * Adds support for AMD command set Top Boot flash geometry reversal
16566 * Adds support for reading JEDEC Manufacturer ID and Device ID
16567 * Adds support for displaying command set, manufacturer id and
16568 device ids (flinfo)
16569 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
16570 * Removes outdated change history (refer to git log instead)
16575 commit b21b511d4c50408f4853f46f06b601272196223f
16577 Date: Sun Nov 12 21:13:23 2006 +0100
16581 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
16583 Date: Sat Nov 11 22:48:22 2006 +0100
16585 Disable the watchdog in the default config for the V38B board.
16587 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
16589 Date: Sat Nov 11 22:43:00 2006 +0100
16591 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
16592 group is enabled for USB earlier (in cpu_init_f() instead of
16593 usb_lowlevel_init()).
16595 commit 91650b3e4de688038d4f71279c44858e3e2c6870
16597 Date: Mon Nov 6 17:06:36 2006 +0100
16599 Sequential accesses to non-existent memory must be synchronized,
16600 at least on G2 cores.
16602 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
16604 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
16606 Date: Fri Nov 3 19:15:00 2006 -0600
16608 mpc83xx: Update 83xx to use fsl_i2c.c
16610 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
16611 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
16612 Added multiple I2C bus support to fsl_i2c.c.
16616 commit d239d74b1c937984bc519083a8e7de373a390f06
16618 Date: Fri Nov 3 12:00:28 2006 -0600
16620 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
16622 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
16623 tree matches the other 8xxx trees.
16627 commit f7fb2e703ec9688541416962724adff70a7322cb
16629 Date: Thu Nov 2 19:47:11 2006 -0600
16631 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
16633 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
16635 Date: Thu Nov 2 18:05:50 2006 -0600
16637 mpc83xx: Fix the incorrect dcbz operation
16639 The 834x rev1.x silicon has one CPU5 errata.
16641 The issue is when the data cache locked with
16642 HID0[DLOCK], the dcbz instruction looks like no-op inst.
16644 The right behavior of the data cache is when the data cache
16645 Locked with HID0[DLOCK], the dcbz instruction allocates
16648 The 834x rev3.0 and later and 8360 have not this bug inside.
16650 So, when 834x rev3.0/8360 are working with ECC, the dcbz
16651 instruction will corrupt the stack in cache, the processor will
16654 However, the 834x rev1.x can work with ECC with these code,
16655 because the sillicon has this cache bug. The dcbz will not
16656 corrupt the stack in cache.
16657 Really, it is the fault code running on fault sillicon.
16659 This patch fix the incorrect dcbz operation. Instead of
16660 CPU FP writing to initialise the ECC.
16663 * Fix the incorrect dcbz operation instead of CPU FP
16664 writing to initialise the ECC memory. Otherwise, it
16665 will corrupt the stack in cache, The processor will checkstop
16670 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
16672 Date: Wed Nov 1 00:10:40 2006 -0600
16674 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
16676 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
16677 STDOUT_PATH configuration bits to mpc8349emds,
16678 mpc8349itx, and mpc8360emds board code.
16680 redo environment to use bootm with the fdtaddr
16681 for booting ARCH=powerpc kernels by default,
16682 and provide default fdtaddr values.
16684 commit 48041365b3420589ad464ebc7752e0053538b729
16686 Date: Wed Nov 1 00:07:25 2006 -0600
16688 mpc83xx: change ft code to modify local-mac-address property
16690 Update 83xx OF code to update local-mac-address properties
16691 for ethernet instead of the obsolete 'address' property.
16693 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
16695 Date: Tue Oct 31 21:23:16 2006 -0600
16697 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
16699 This patch also adds an improved I2C set_speed(), which handles all clock
16704 commit ac4b5622ce050b5ee1e154b98df630d778661632
16706 Date: Tue Oct 31 19:54:59 2006 -0600
16708 mpc83xx: add the README.mpc8360emds
16710 add doc/README.mpc8360emds to accompany the new board support
16712 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
16714 Date: Fri Nov 3 12:11:15 2006 -0600
16716 mpc83xx: add QE ethernet support
16718 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
16720 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
16722 Date: Fri Nov 3 19:33:44 2006 -0600
16724 mpc83xx: Add MPC8360EMDS basic board support
16726 Add support for the Freescale MPC8360EMDS board.
16727 Includes DDR, DUART, Local Bus, PCI.
16729 commit 23892e49352de74f7fac36ff90bb1be143d195e3
16731 Date: Tue Oct 31 19:30:40 2006 -0600
16733 mpc83xx: add the QUICC Engine (QE) immap file
16735 common QE immap file. Also required for 8360.
16737 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
16739 Date: Tue Oct 31 19:25:38 2006 -0600
16741 mpc83xx: Add 8360 specifics to 83xx immap
16743 Mainly add QE device dependencies, with appropriate 8360 protection.
16746 commit 988833324a7fda482c8ac3ca23eb539f8232e404
16748 Date: Tue Oct 31 19:14:41 2006 -0600
16750 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
16752 PREREQUISITE PATCHES:
16754 * This patch can only be applied after the following patches have been applied:
16756 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
16757 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
16761 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
16762 the clock for the 2nd USB board (Linux kernel will hang otherwise),
16763 and fix the CONFIG_BOOTARGS macro.
16767 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
16769 Date: Tue Oct 31 18:44:42 2006 -0600
16771 mpc83xx: Add support for the MPC8349E-mITX
16773 PREREQUISITE PATCHES:
16775 * This patch can only be applied after the following patches have been applied:
16777 1) DNX#2006090742000024 "Add support for multiple I2C buses"
16778 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
16779 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
16780 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
16781 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
16785 * Add support for the Freescale MPC8349E-mITX reference design platform.
16786 The second TSEC (Vitesse 7385 switch) is not supported at this time.
16790 commit 183da6d9b446cc12123455844ad1187e2375626f
16792 Date: Tue Sep 12 10:15:53 2006 -0400
16794 Additional MPC8349 support for multibus i2c
16798 Here is a patch for a file that was accidentally left out of a previous
16801 It accompanies the patch with ticket DNX#2006090742000024
16804 Change PCI initialization to use new multi-bus I2C API.
16809 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
16811 Date: Thu Sep 7 16:51:04 2006 -0400
16813 Multi-bus I2C implementation of MPC834x
16817 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
16818 family and the MPC8349EMDS board in particular.
16819 This patch requires Patch 1 (Add support for multiple I2C buses).
16820 Testing was performed on a 533MHz board.
16822 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
16827 Implemented driver-level code to support two I2C buses on the
16828 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
16829 are 50kHz, 100kHz and 400kHz on each bus.
16834 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
16836 Date: Thu Sep 7 16:50:54 2006 -0400
16838 Add support for multiple I2C buses
16842 Attached is a patch providing support for multiple I2C buses at the
16843 command level. The second part of the patch includes an implementation
16844 for the MPC834x CPU and MPC8349EMDS board.
16846 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
16852 1. Include new 'i2c' command (based on USB implementation) using
16853 CONFIG_I2C_CMD_TREE.
16855 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
16856 the commands to change bus number and speed are only available under the
16857 new 'i2c' command mentioned in the first bullet.
16859 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
16860 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
16861 of an array of bus-device pairs. Otherwise, it is an array of uchar.
16864 Added new 'i2c' master command for all I2C interaction. This is
16865 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
16866 setting I2C bus speed as well as changing the active bus if the board
16867 has more than one (conditionally compiled with
16868 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
16874 commit bed85caf872714ebf53013967a695c9d63acfc68
16876 Date: Tue Oct 31 18:13:36 2006 -0600
16878 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
16882 * Errata DDR6, which affects all current MPC 834x processors, lists changes
16883 required to maintain compatibility with various types of DDR memory. This
16884 patch implements those changes.
16888 commit afd6e470f639883002c7c59d562690a5cb0f4865
16890 Date: Wed Oct 25 18:45:23 2006 -0500
16892 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
16894 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
16896 Date: Tue Aug 22 17:07:00 2006 -0500
16898 mpc83xx: Add support for variable flash memory sizes on 83xx systems
16902 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
16903 window registers, instead of using a hard-coded value of 8MB.
16907 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
16909 Date: Thu Aug 3 18:38:13 2006 +0800
16911 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
16913 Unified TQM834x variable names with 83xx and consolidated macro
16914 in preparation for the 8360 and other upcoming 83xx devices.
16918 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
16920 Date: Wed Oct 25 14:41:21 2006 -0500
16922 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
16924 Incorporated the common unified variable names and the changes in preparation
16925 for releasing mpc8360 patches.
16929 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
16931 Date: Thu Aug 3 18:36:02 2006 +0800
16933 mpc83xx: Fix missing build for mpc8349emds pci.c
16935 Make pci build for mpc8349emds
16939 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
16941 Date: Thu Aug 3 18:39:49 2006 +0800
16943 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
16945 Removed unused file resetvec.S for mpc83xx cpu
16949 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
16951 Date: Sat Sep 30 00:32:59 2006 -0700
16953 NAND Flash verify across block boundaries
16955 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
16957 and the write crosses a block boundary. The pointer to the verification
16958 buffer (bufstart) is not being updated to reflect the starting of the
16960 block so the verification of the second block fails.
16964 * Fix NAND FLASH page verification across block boundaries
16966 commit f484dc791a3932537213c43c654cc1295c64b84c
16968 Date: Thu Sep 7 07:39:46 2006 -0700
16970 Added RGMII support to the TSECs and Marvell 881111 Phy
16972 Added a phy initialization to adjust the RGMII RX and TX timing
16973 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
16977 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
16979 Date: Fri Nov 3 13:10:00 2006 +0800
16981 Remove some unused CFG define.
16982 undef CFG_DRAM_TEST
16984 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
16986 Date: Fri Nov 3 13:07:36 2006 +0800
16988 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
16989 Both work. 0xFF000000 seems more reasonable.
16991 commit c59200443072353044aa4bf737a5a60f9a9af231
16993 Date: Thu Nov 2 15:15:01 2006 +0100
16995 Release U-Boot 1.1.6
16997 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
16999 Date: Thu Nov 2 19:14:48 2006 +0800
17001 This patch comes from Yuli's posted patch on 8/8/2006
17002 titled "CFI Driver Little-Endian write Issue".
17004 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
17006 If that patch applied, please discard this one.
17007 Until now , I do not see his patch is applied. So please apply this one.
17012 commit b825f158e449e1e9cf74c08e572955e122394c96
17014 Date: Thu Nov 2 19:12:31 2006 +0800
17016 Tsi108 on chip i2c support.
17018 The i2c Interface provides a master-only, serial interface that can be
17019 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
17025 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
17027 Date: Thu Nov 2 19:11:06 2006 +0800
17029 Tsi108 on chip pci controller support.
17031 If there is no pci card, the tsi108/109 pci configure read will
17032 cause a machine check exception to the processor. PCI error should
17033 also be cleared after the read.
17038 commit d1927cee977126e547ceeba23e4f978f377cfb8f
17040 Date: Thu Nov 2 19:08:55 2006 +0800
17042 Tundra tsi108 on chip Ethernet controller support.
17044 The following is a brief description of the Ethernet controller:
17045 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
17046 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
17047 to manage the two physical connection devices (PHYs). Each Ethernet port
17048 has its own statistics monitor that tracks and reports key interface
17049 statistics. Each port supports a 256-entry hash table for address
17050 filtering. In addition, each port is bridged to the Switch Fabric
17051 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
17053 Each Ethernet port also has a pair of internal Ethernet DMA channels to
17054 support the transmit and receive data flows. The Ethernet DMA channels
17055 use descriptors set up in memory, the memory map of the device, and
17056 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
17057 handles arbitration for the Switch Fabric. The Controller also
17058 has a register businterface for register accesses and status monitor
17061 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
17062 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
17063 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
17064 data flows to and from the Ethernet Controller through the Switch Fabric.
17066 Each Ethernet port uses its transmit and receive DMA channels to manage
17067 data flows through buffer descriptors that are predefined by the
17068 system (the descriptors can exist anywhere in the system memory map).
17069 These descriptors are data structures that point to buffers filled
17070 with data ready to transmit over Ethernet, or they point to empty
17071 buffers ready to receive data from Ethernet.
17076 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
17078 Date: Thu Nov 2 19:01:33 2006 +0800
17080 Tundra tsi108 header file.
17082 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
17083 PowerPC processors that offers numerous system interconnect options for
17084 embedded application designers. The Tsi108 can interconnect 60x or
17085 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
17086 and Flash. Provided the macro define for tsi108 chip.
17091 commit 87c4db09699c6b89176b31004afcb83eb1585d47
17093 Date: Thu Nov 2 18:59:15 2006 +0800
17095 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
17096 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
17101 commit 27801b8ab11c61b577e45742a515bb3b23b80241
17103 Date: Thu Nov 2 18:57:21 2006 +0800
17105 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
17106 Make ,config.mk and link file for the mpc7448hpc2 board.
17111 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
17113 Date: Thu Nov 2 18:55:04 2006 +0800
17115 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
17116 The mpc7448hpc2 board support header file.
17121 commit 625bb5ddb50b243f931262ca8c46956409471917
17123 Date: Thu Nov 2 18:52:21 2006 +0800
17125 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
17126 The mpc7448hpc2 board support low level assemble language init code.
17131 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
17133 Date: Thu Nov 2 18:49:51 2006 +0800
17135 General code modification for mpc7448hpc2 board support.
17136 1. Add 7447A and 7448 processor support.
17137 2. Add the following flags.
17139 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
17140 (such as by switch on board), this flag should be set.
17142 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
17143 relocates to RAM, this flag should be set.
17145 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
17146 system hang in exception, this flag should be set.
17148 There is a design issue for tsi108/109 pci configure read. When pci scan
17149 the slots, if there is no pci card, the tsi108/9 will cause a machine
17150 check exception for mpc7448 processor.
17155 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
17157 Date: Thu Nov 2 18:34:47 2006 +0800
17159 Add README file for mpc7448hpc2 board.
17162 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
17164 Date: Wed Nov 1 02:04:38 2006 +0100
17166 Finish up support for MarelV38B board
17167 - add watchdog support
17168 - enable GPIO_WKUP_7 pin for input
17171 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
17173 Date: Wed Nov 1 01:45:46 2006 +0100
17175 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
17176 * remove warnings when compiling ethaddr.c
17177 * adjust linker script (fixes a crash resulting from incorrect
17178 definition of __u_boot_cmd_start)
17179 - Some MarelV38B code cleanup.
17181 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
17183 Date: Wed Nov 1 01:38:16 2006 +0100
17185 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
17186 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
17187 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
17188 MPC5XXX_WU_GPIO_DATA_O for affected boards.
17190 - Add defintions for some MPC5XXX GPIO pins.
17192 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
17194 Date: Wed Nov 1 01:34:29 2006 +0100
17196 Changed MarelV38B board make target to lowercase. Config file cleanup.
17198 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
17200 Date: Sun Oct 29 01:03:51 2006 +0200
17202 Automatically adjust ARFLAGS so "make -s" is really silent.
17204 commit fae684e89844856383bdf101440889557df3e6b1
17206 Date: Sat Oct 28 16:45:00 2006 +0200
17208 [PATCH] omap925.c: Remove unused functions
17213 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
17215 Date: Sat Oct 28 17:12:58 2006 +0200
17217 [PATCH] Add some missing machtypes for netstar & voiceblue boards
17219 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
17225 commit 856f054410cef52d868feb330168b2a4c4091328
17227 Date: Sat Oct 28 15:55:52 2006 +0200
17229 [PATCH] NAND: Partition name support added to NAND subsystem
17231 chpart, nboot and NAND subsystem related commands now accept also partition
17232 name to specify offset.
17237 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
17239 Date: Sat Oct 28 02:29:44 2006 +0200
17243 commit 2751a95abd1b96911081c357e96a12fa97b40dee
17245 Date: Sat Oct 28 02:29:14 2006 +0200
17247 Enable commandline editing and hush shell on all TQM boards.
17249 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
17251 Date: Sat Oct 28 02:28:02 2006 +0200
17253 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
17255 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
17257 Date: Sat Oct 28 01:14:32 2006 +0200
17259 Check for illegal character '=' in environment variable names.
17261 Make sure the string passed as variable name does not contain a '='
17262 character. This not only prevents the common error or typing
17263 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
17264 also closes a backdoor which allowed to delete write-protected
17265 environment variables, for example by using "setenv ethaddr=".
17267 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
17269 Date: Sat Oct 28 00:38:39 2006 +0200
17271 Minor code cleanup.
17273 commit e11887a77d81077416a2d1c5e0354916fee8c034
17275 Date: Thu Oct 26 17:55:31 2006 +0200
17277 Don't pass any debug options directly to the assembler
17279 When passing the -g option to gcc, gcc automatically selects a
17280 suitable --g<format> option to pass on to the assembler.
17281 Thus, there's no point in forcing a specific debug option on the
17282 assembler using the -Wa mechanism.
17286 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
17288 Date: Fri Oct 27 07:47:22 2006 -0500
17290 MPC86xx: Cleaned up unused and conditionally used local variables.
17294 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
17296 Date: Fri Oct 27 11:55:21 2006 +0200
17298 Fix "ar" flags in some Makefiles to allow for silent "make -s"
17300 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
17302 Date: Thu Oct 26 14:38:25 2006 -0400
17304 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
17305 to a TSEC (e.g. a switch is connected via RMII) or
17306 if the PHY is defective/incorrectly configured.
17310 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
17312 Date: Thu Oct 26 14:38:25 2006 -0400
17314 Fix TSEC driver: avoid crashes if PHY is not attached
17315 to a TSEC (e.g. a switch is connected via RMII) or
17316 if the PHY is defective/incorrectly configured.
17320 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
17322 Date: Thu Oct 26 16:24:31 2006 +0200
17326 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
17328 Date: Wed Oct 25 15:48:59 2006 +0200
17330 Finish up support for the ATSTK1000/ATSTK1002 boards
17332 Add atstk1002_config target to Makefile and move the AVR32 section
17333 down below Blackfin so that it doesn't end up in the middle of
17336 Drop the autogenerated linker script thing for now. Will have to
17337 revisit how to handle chips with different flash and RAM layout
17342 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
17344 Date: Tue Oct 24 23:47:37 2006 -0500
17346 Added support for Multi-Image files that contain a device tree
17348 If a Multi-Image file contains a third image we try to use it as a
17349 device tree. The device tree image is assumed to be uncompressed in the
17350 image file. We automatically allocate space for the device tree in memory
17351 and provide an 8k pad to allow more than a reasonable amount of growth.
17353 Additionally, a device tree that was contained in flash will now automatically
17354 get copied to system memory as part of boot. Previously an error was
17355 reported if one tried to boot a device tree that was in flash.
17359 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
17361 Date: Tue Oct 24 21:35:55 2006 +0200
17363 Switch to automatically generated CHANGELOG file.
17364 (use "make CHANGELOG" to update it from time to time)
17366 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
17368 Date: Tue Oct 24 18:06:48 2006 +0200
17370 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
17371 Patch by Stefan Roese, 24 Oct 2006
17373 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
17375 Date: Tue Oct 24 17:24:55 2006 +0200
17377 Merge with /home/wd/git/u-boot/master
17379 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
17381 Date: Tue Oct 24 15:32:57 2006 +0200
17385 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
17387 Date: Tue Oct 24 14:51:36 2006 +0200
17389 Move atstk1000 files into vendor specific directory.
17390 Patch by Haavard Skinnemoen, 12 Sep 2006
17392 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
17394 Date: Tue Oct 24 14:42:37 2006 +0200
17396 Add ATSTK1000 and ATSTK1002 board support
17397 Patch by Haavard Skinnemoen, 06 Sep 2006
17399 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
17402 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
17403 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
17404 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
17405 CompactFlash cards. For more information, please see this page:
17407 http://www.atmel.com/dyn/products/tools.asp?family_id=682
17409 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
17414 commit f93ae788c3640fcde5db383471d45548ff4060d0
17416 Date: Tue Oct 24 14:31:24 2006 +0200
17418 Add common serial driver for Atmel AT32 and AT91 chips
17419 Patch by Haavard Skinnemoen, 06 Sep 2006
17421 This is a first attempt at creating a common serial driver for Atmel
17422 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
17423 be possible to support AT91RM9200 and other ARM-based chips with some
17424 minor modifications.
17426 There's nothing fundamentally AVR32-specific in this driver, but it
17427 does use some features which are currently only defined for the
17429 * pm_get_clock_freq: Obtain the clock frequency of a given domain
17430 * gd->console_uart: A "struct device" containing information about
17431 register mappings, gpio resources and clocks associated with the
17434 For more information about these features, please see the "AT32AP
17437 commit 72a087e04705c26cad982879ebd06b5281bf825a
17439 Date: Tue Oct 24 14:27:35 2006 +0200
17441 Add AT32AP CPU and AT32AP7000 SoC support
17442 Patch by Haavard Skinnemoen, 06 Sep 2006
17444 This patch adds support for the AT32AP CPU family and the AT32AP7000
17445 chip, which is the first chip implementing the AVR32 architecture.
17447 The AT32AP CPU core is a high-performance implementation featuring a
17448 7-stage pipeline, separate instruction- and data caches, and a MMU.
17449 For more information, please see the "AVR32 AP Technical Reference":
17451 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
17453 In addition to this, the AT32AP7000 chip comes with a large set of
17454 integrated peripherals, many of which are shared with the AT91 series
17455 of ARM-based microcontrollers from Atmel. Full data sheet is
17458 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
17462 commit 7b64fef33c66be648826c0ff9758298ef13d0604
17464 Date: Tue Oct 24 14:21:16 2006 +0200
17466 Add AVR32 architecture support
17467 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
17469 This patch adds common infrastructure code for the Atmel AVR32
17470 architecture. See doc/README.AVR32 for details.
17474 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
17476 Date: Tue Oct 24 13:57:33 2006 +0200
17478 Use -g instead of -gstabs in AFLAGS_DEBUG
17479 Patch by Haavard Skinnemoen, 30 Aug 2006
17481 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
17482 matter what the target's preferred debugging format is. This patch
17483 simply replaces -gstabs with -g, so that the default debugging format
17484 for the architecture is used.
17486 commit 965829872169c2996023840d98e1d85ad148d629
17488 Date: Tue Oct 24 13:55:18 2006 +0200
17490 Fix/workaround broken dependency handling with make 3.81
17491 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
17493 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
17495 Date: Mon Oct 23 22:17:05 2006 +0200
17497 Fix sequoia separate object direcory building problems.
17499 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
17501 Date: Fri Oct 20 17:16:35 2006 -0500
17503 Use generic I2C register block on 85xx and 86xx.
17505 Replace private IMMAP I2C structures with generic reg block
17506 and allow 86xx to have multiple I2C device busses.
17510 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
17512 Date: Fri Oct 20 15:54:34 2006 -0500
17514 Fix compilation warnings on a few 85xx boards.
17518 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
17520 Date: Fri Oct 20 15:50:15 2006 -0500
17522 Converted all 85xx boards to use a common FSL I2C driver.
17523 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
17524 And removed hard i2c path from a few u-boot.lds scipts too.
17525 Minor whitespace cleanups along the way.
17529 commit 4d45f69e362b05892c9e92a7907e5820995612aa
17531 Date: Thu Oct 19 12:02:24 2006 -0500
17533 Rewrite a series of goto statements as a sequences of
17534 conditional expressions instead.
17536 Use consistent return code 0/-1 for good/bad indicators.
17538 Include one fewer file if the driver isn't used at all.
17542 commit 7237c033b02fe295880435f1eb80819a0c987532
17544 Date: Thu Oct 19 11:02:16 2006 -0500
17546 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
17548 in an effort to begin to unify the umpteen FSL I2C drivers that
17549 are all otherwise very similar.
17553 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
17555 Date: Thu Oct 19 11:33:52 2006 -0500
17557 * Fix a bunch of compiler warnings for gcc 4.0
17561 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
17563 Date: Tue Oct 17 06:14:31 2006 +0200
17565 Add monitor functions for indirect access to PPC440 DCR's
17566 Patch by Leonid Baryudin, 12 Oct 2006
17568 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
17570 Date: Fri Oct 13 16:47:53 2006 -0500
17572 Fixed leading whitespace issues.
17573 Removed spurious LAWAR thing.
17577 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
17579 Date: Thu Oct 12 10:42:36 2006 -0500
17581 Remove unneeded include files and local variable.
17585 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
17587 Date: Tue Oct 10 00:23:32 2006 -0600
17589 Fix possible uninitialized variable compiler warning.
17591 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
17592 do_bootm_linux() may be uninitialized. There is no possibility in the
17593 current code that len will get used uninitialized, but this fix follows
17594 the existing convention of setting both len and data to zero at the same
17599 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
17601 Date: Wed Oct 11 15:13:01 2006 -0500
17603 * Fix a bunch of compiler warnings for gcc 4.0
17607 commit bf651baa365e5447246aad6a633ccd667cf24a39
17609 Date: Wed Oct 11 10:10:43 2006 -0500
17611 Move "ar" flags to config.mk to allow for silent "make -s"
17613 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
17615 Date: Tue Oct 10 17:19:03 2006 -0500
17617 Coding style changes to remove local varible blocks
17618 and reformat a bit nicer.
17620 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
17622 Date: Tue Oct 10 17:16:04 2006 -0500
17624 Fix whitespace issues.
17626 commit 7b382b7125f2397cce63253df62f183e3dfa2770
17628 Date: Tue Oct 10 17:14:45 2006 -0500
17630 Fix whitespace issues.
17632 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
17634 Date: Tue Oct 10 17:06:53 2006 -0500
17636 Fix whitespace issues.
17638 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
17640 Date: Tue Oct 10 17:03:43 2006 -0500
17642 Ran lindent and cleaned up whitespace issues.
17643 Format for 80-columns too.
17645 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
17647 Date: Tue Oct 10 17:02:22 2006 -0500
17649 Fix whitespace and 80-col issues.
17651 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
17653 Date: Sat Oct 7 11:36:51 2006 +0200
17655 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
17656 Patch by Stefan Roese, 07 Oct 2006
17658 commit 5bc528fa4da751d472397b308137238a6465afd2
17660 Date: Sat Oct 7 11:35:25 2006 +0200
17662 Update ALPR code (NAND support working now)
17663 Patch by Stefan Roese, 07 Oct 2006
17665 commit 77d5034847d328753b80c46b83f960a14a26f40e
17667 Date: Sat Oct 7 11:33:03 2006 +0200
17669 Remove compile warnings in fpga code
17670 Patch by Stefan Roese, 07 Oct 2006
17672 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
17674 Date: Sat Oct 7 11:30:52 2006 +0200
17676 Add CONFIG_BOARD_RESET to configure board specific reset function
17677 Patch by Stefan Roese, 07 Oct 2006
17679 commit f55df18187e7a45cb73fec4370d12135e6691ae1
17681 Date: Fri Sep 29 08:23:12 2006 +0100
17683 Fix missing tCycle/modfreq calculation.
17687 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
17689 Date: Wed Sep 13 10:33:35 2006 -0500
17691 Updated config headers to add default FDT-based booting
17693 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
17695 Date: Wed Sep 13 10:34:18 2006 -0500
17697 Add support for eTSEC 3 & 4 on 8548 CDS
17699 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
17700 This will only work on rev 1.3 boards (but doesn't break older boards)
17701 * Cleaned up some comments to reflect the expanded role of tsec
17704 commit 084d648b109c8984f83674043c1a7fa3885ef801
17706 Date: Wed Sep 13 10:33:56 2006 -0500
17708 Added code to support 2.6.18 PCI changes in u-boot
17710 * Added code to swizzle the IRQ map for the PCI
17712 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
17714 Date: Tue Sep 19 09:34:10 2006 -0500
17716 Modified makefile for new build mechanism.
17720 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
17722 Date: Thu Sep 14 08:40:36 2006 -0500
17724 Handle 86xx SVR values according to the new Reference Manual.
17725 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
17726 by the byte in bits 16-23 instead.
17727 Thanks to Jason Jin for noticing.
17731 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
17733 Date: Mon Aug 28 14:25:31 2006 +0800
17735 Fixed an OF-tree off-by-one bug when adding a new property name.
17736 This bug will cause the kernel booting to pause a long time.
17739 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
17741 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
17743 Date: Tue Aug 29 11:05:09 2006 -0500
17745 Remove trailing empty lines.
17747 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
17749 Date: Tue Aug 29 09:48:49 2006 -0500
17751 Remove bogus msync and use volatile asm.
17753 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
17755 Date: Tue Aug 29 08:17:14 2006 -0500
17757 Add myself as maintainer for MPC8641HPCN.
17759 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
17761 Date: Mon Aug 28 14:25:31 2006 +0800
17763 Fixed an OF-tree off-by-one bug when adding a new property name.
17764 This bug will cause the kernel booting to pause a long time.
17768 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
17770 Date: Fri Aug 25 14:38:34 2006 -0400
17772 Change ramdiskaddr and dtbaddr
17773 Remove PEX fluff commands.
17778 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
17780 Date: Wed Aug 23 13:32:45 2006 -0500
17782 * Another small fix for booting with disable_of
17786 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
17788 Date: Wed Aug 23 11:04:43 2006 -0500
17790 Cleanup and lindent new AHCI driver.
17792 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
17794 Date: Wed Aug 23 19:15:12 2006 +0800
17796 Add AHCI define and sata support for MPC8641HPCN board.
17800 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
17802 Date: Wed Aug 23 19:10:44 2006 +0800
17804 Add AHCI support to u-boot
17806 Add AHCI support in u-boot, enable the sata disk controllers which
17807 following the AHCI protocol.
17811 commit d8ea2acf5f137cae99417df4f573d036ee384668
17813 Date: Wed Aug 23 17:54:32 2006 +0800
17815 Add dtb boot-up parameter to default boot commands.
17819 commit b93775c2036b99baa390ea425c4771895bbc63c4
17821 Date: Tue Aug 22 18:26:08 2006 -0500
17823 Cleanup even more poorly introduced whitespace.
17825 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
17827 Date: Tue Aug 22 18:07:00 2006 -0500
17829 Cleanup more poorly introduced whitespace.
17831 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
17833 Date: Tue Aug 22 17:54:05 2006 -0500
17835 Cleanup poorly introduced whitespace.
17837 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
17839 Date: Tue Aug 22 12:25:27 2006 -0500
17841 General indent and whitespace cleanups.
17843 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
17845 Date: Tue Aug 22 12:06:18 2006 -0500
17847 General indent and whitespace cleanups.
17849 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
17851 Date: Tue Aug 22 10:42:21 2006 -0500
17853 Cleanup compiler warnings.
17855 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
17857 Date: Tue Aug 22 09:31:59 2006 -0500
17859 Fix disable_of booting
17863 commit 87a449c8ac396420cb24260f717ea9e6faa82047
17865 Date: Tue Aug 22 09:23:55 2006 -0500
17867 Support for FDT in uImage format, error when using FDT from flash
17871 commit 75c299c38369d01addd5e054b8a16217b70f4a86
17873 Date: Tue Aug 15 15:12:55 2006 -0400
17875 Unlock cache before kernel starts up for MPC86xx
17877 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
17879 Date: Tue Aug 15 15:13:15 2006 -0400
17881 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
17883 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
17885 Date: Tue Aug 15 15:12:55 2006 -0400
17887 Unlock cache before kernel starts up for MPC86xx
17889 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
17891 Date: Tue Aug 15 15:13:15 2006 -0400
17893 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
17895 commit 86c8e17f25e972a7e272950a0735fad84e082b88
17897 Date: Wed Aug 16 13:59:47 2006 -0500
17899 * Fix disable_of booting
17903 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
17905 Date: Wed Aug 16 10:54:09 2006 -0500
17907 * Support for FDT in uImage format, error when using FDT from flash
17911 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
17913 Date: Tue Aug 15 14:22:35 2006 +0200
17915 Add initial support for the ALPR board from Prodrive
17916 NAND needs some additional testing
17917 Patch by Heiko Schocher, 15 Aug 2006
17919 commit f0ff4692ff3372dec55074a8eb444943ab095abb
17921 Date: Tue Aug 15 14:15:51 2006 +0200
17923 Add FPGA Altera Cyclone 2 support
17924 Patch by Heiko Schocher, 15 Aug 2006
17926 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
17928 Date: Mon Aug 14 15:33:38 2006 -0500
17930 Fix BAT0 to actually be cacheable, non-guarded as documented.
17934 commit 40bc83559db5745681909fd7382ae509567e116d
17936 Date: Wed Aug 9 15:32:16 2006 -0500
17938 Removed MPC8641HPCN DTS source file from build.
17939 It is no longer linked into U-Boot; its sources are
17940 now located in the kernel tree.
17944 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
17946 Date: Wed Jun 28 10:47:03 2006 -0500
17948 * Switched default PCI speed for 8540 ADS back to 33MHz
17950 * Added comments and a printf to warn that PCI-X won't
17952 Patch by Andy Fleming 17-Mar-2006
17956 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
17958 Date: Wed Jun 28 10:46:35 2006 -0500
17960 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
17964 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
17966 Date: Wed Jun 28 10:46:13 2006 -0500
17968 * Added VIA configuration table
17970 * Added support for PCI2 on CDS
17971 Patch by Andy Fleming 17-Mar-2006
17975 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
17977 Date: Wed Jun 28 10:45:41 2006 -0500
17979 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
17983 commit 97074ed9655309b64231bc2cee69fe85399f8055
17985 Date: Wed Jun 28 10:45:17 2006 -0500
17987 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
17991 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
17993 Date: Wed Jun 28 10:44:49 2006 -0500
17995 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
17999 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
18001 Date: Wed Jun 28 10:44:23 2006 -0500
18003 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
18007 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
18009 Date: Wed Jun 28 10:43:36 2006 -0500
18011 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
18015 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
18017 Date: Wed Jun 28 10:43:00 2006 -0500
18019 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
18021 commit 5498d90312aad9f6bdbf047986027c35b03cd163
18023 Date: Wed Jun 28 10:42:24 2006 -0500
18025 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
18027 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
18029 Date: Wed Jun 28 10:41:37 2006 -0500
18031 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
18033 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
18035 Date: Wed Aug 9 14:33:50 2006 +0100
18037 Add Rapidio support for the MPC8641HPCN
18041 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
18043 Date: Tue Aug 8 11:32:43 2006 +0100
18045 Fix caslat calculation
18049 commit 709d3073e74153278e7904a70819bbef7df50e1a
18051 Date: Thu Aug 3 16:17:56 2006 -0500
18053 Convert to mac-address in ethernet nodes.
18055 commit 71748af833ca1017edf1415be376366ff2937d17
18057 Date: Fri Jul 28 12:41:35 2006 -0400
18059 Correct the irq value of DUART2
18061 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
18063 Date: Fri Jul 28 12:41:41 2006 -0400
18065 Change the space size of PEX IO in README
18067 commit 239db37c94f7a92941c4465feceb867c609241c5
18069 Date: Fri Jul 28 12:41:18 2006 -0400
18071 Move get_board_sys_clk to board directory
18073 commit 492900b985439fbce1a118afde1e35def870db03
18075 Date: Fri Jul 28 09:03:54 2006 +0100
18077 Fix 8641HPCN pollution
18079 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
18081 Date: Fri Jul 28 08:16:06 2006 +0100
18083 Fix 8641HPCN timebase
18085 commit c86360b830f1eecd7a72208575dde4f57879faea
18087 Date: Fri Jul 28 00:01:34 2006 +0800
18089 Fixed OF device tree of mpc86xxhpcn board.
18091 The changes works in with kernel irq mapping rework.
18095 commit bea3f28d285942bf3f7ab339ce85178ded544225
18097 Date: Wed Jul 12 10:48:05 2006 -0400
18099 Add support for reading and writing mac addresses to or from ID EEPROM.
18101 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
18102 With attached patch, we can use command "mac/mac read/mac save/"
18103 to read and write EEPROM under u-boot prompt.
18105 U-boot will calculate the checksum of EEPROM while bootup,
18106 if it is right, then u-boot will check whether the mac address
18107 of eTSEC0/1/2/3 is availalbe (non-zero).
18109 If there is mac address availabe in EEPROM, u-boot will use it,
18110 otherewise, u-boot will use the mac address defined in
18111 MPC8641HPCN.h. This matches the requirement to set unique mac address
18112 for each TSEC port.
18117 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
18119 Date: Thu Jul 13 10:35:10 2006 -0500
18121 Fixed initrd issue by define big RAM
18125 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
18127 Date: Fri Jul 7 10:01:45 2006 -0500
18129 We made a u-boot patch to fix the hang up issue
18130 when booting filesystem from ramdisk.
18134 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
18136 Date: Wed Jun 28 10:47:03 2006 -0500
18138 * Switched default PCI speed for 8540 ADS back to 33MHz
18139 * Added comments and a printf to warn that PCI-X won't
18141 Patch by Andy Fleming 17-Mar-2006
18145 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
18147 Date: Wed Jun 28 10:46:35 2006 -0500
18149 * Fixed a bug where 8555 PCI code used the old variable and
18151 Patch by Andy Fleming 17-Mar-2006
18155 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
18157 Date: Wed Jun 28 10:46:13 2006 -0500
18159 * Added VIA configuration table
18160 * Added support for PCI2 on CDS
18161 Patch by Andy Fleming 17-Mar-2006
18165 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
18167 Date: Wed Jun 28 10:45:41 2006 -0500
18169 * Fixed PCI memory definitions
18170 Patch by Andy Fleming 17-Mar-2006
18174 commit 087454609e47295443af793a282cddcd91a5f49c
18176 Date: Wed Jun 28 10:45:17 2006 -0500
18178 * Added support for initializing second PCI bus on 85xx
18179 Patch by Andy Fleming 17-Mar-2006
18183 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
18185 Date: Wed Jun 28 10:44:49 2006 -0500
18187 * Added PCI-X #defines for PCI-X initialization
18188 Patch by Andy Fleming on 17-Mar-2006
18192 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
18194 Date: Wed Jun 28 10:44:23 2006 -0500
18196 * Made sure the code which disables prefetch for PCI devices
18197 sets the size of the prefetch region to 0
18198 Patch by Andy Fleming on 17-Mar-2006
18202 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
18204 Date: Wed Jun 28 10:43:36 2006 -0500
18206 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
18207 Patch by Jon Loeliger 17-Jan-2006
18211 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
18213 Date: Wed Jun 28 10:43:00 2006 -0500
18215 * Removed the oftree.dts for stxxtx in light of the changes
18216 to the flat device tree handling code
18217 Patch by Matthew McClintock 26-June-2006
18219 commit 1b380ec225665e73959677f3893dc658c5925e05
18221 Date: Wed Jun 28 10:42:24 2006 -0500
18223 * Patch to modify ft_build.c to update flat device trees in place
18224 Patch by Matthew McClintock 26-June-2006
18226 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
18228 Date: Wed Jun 28 10:41:37 2006 -0500
18230 * Modify bootm command to support booting with flat device trees
18231 Patch by Matthew McClintock 26-June-2006
18233 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
18235 Date: Wed Jun 28 08:43:56 2006 -0500
18237 Change Id to symbolic name for RTL8139
18241 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
18243 Date: Tue Jun 27 18:12:10 2006 +0800
18245 Fix RTL8139 in big endian
18250 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
18252 Date: Tue Jun 27 18:12:23 2006 +0800
18254 Fix Tsec bug when no link
18256 When tftp a non-exist file from the tftp server, u-boot will check
18257 the link of all eth port. The original file will return wrong link
18258 state on the no link ports.
18262 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
18264 Date: Tue Jun 27 18:12:02 2006 +0800
18266 Fix bug for io_bar size during pci scan
18268 During the pci scan process, Some devices return bar_reponse with the
18269 highest bytes 0, such as the pci bridge in uli1575 return bar_response
18270 with 0xffffff, So the bar_size should be manually set under 64K.
18274 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
18276 Date: Tue Jun 27 18:11:54 2006 +0800
18278 Enable PCIE1 for MPC8641HPCN board
18282 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
18284 Date: Mon Jun 26 11:06:00 2006 +0200
18288 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
18290 Date: Thu Jun 22 08:51:46 2006 -0500
18292 Fix bug in 8641hpcn reset command with no args.
18297 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
18299 Date: Tue Jun 20 17:47:15 2006 +0800
18301 Reworked IRQ mapping in OF-tree.
18303 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
18305 Date: Thu Jun 15 21:33:37 2006 -0500
18307 Do not enable address translation on secondary CPUs.
18308 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
18312 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
18314 Date: Wed Jun 14 18:14:56 2006 +0200
18318 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
18320 Date: Wed Jun 14 17:45:53 2006 +0200
18322 Various USB related patches
18323 - Add support for mpc8xx USB device.
18324 - Add support for Common Device Class - Abstract Control Model USB console.
18325 - Add support for flow control in USB slave devices.
18326 - Add support for switching between gserial and cdc_acm using environment.
18327 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
18328 - Update usbcore slightly to ease host enumeration.
18329 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
18330 - Add AdderUSB_config as a defconfig to enable usage of the USB console
18331 by default with the Adder87x U-Boot port.
18334 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
18336 Date: Wed Jun 7 10:53:55 2006 -0500
18338 Fix a get_board_sys_clk() use-before-def warning.
18342 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
18344 Date: Wed Jun 7 10:52:49 2006 -0500
18346 Allow DTC path to be passed in.
18350 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
18352 Date: Tue Jun 6 16:54:29 2006 -0400
18354 Modify the IRQ of DUART2
18356 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
18358 Date: Wed May 31 13:55:35 2006 -0500
18364 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
18366 Date: Wed May 31 12:44:44 2006 -0500
18368 White space cleanup.
18369 Some 80-column cleanups.
18370 Convert printf() to puts() where possible.
18371 Use #include "spd_sdram.h" as needed.
18372 Enhanced reset command usage message a bit.
18376 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
18378 Date: Wed May 31 11:39:34 2006 -0500
18380 Removed unneeded local_bus_init() from 8641HPCN board.
18384 commit 4d3d729c16c392d2982d3266b659d333c927697d
18386 Date: Wed May 31 11:24:28 2006 -0500
18388 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
18392 commit b2a941de060350ad15878d8219825f4950e9bb8e
18394 Date: Wed May 31 10:07:28 2006 -0500
18396 Remove dead debug code.
18400 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
18402 Date: Tue May 30 17:47:00 2006 -0500
18404 Move mpc86xx PIXIS code to board directory
18406 First cut at moving the PIXIS platform code out of
18407 the 86xx cpu directory and into board/mpc8641hpcn
18412 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
18414 Date: Tue May 30 16:56:14 2006 +0200
18416 Support generic OHCI support for the s3c24x0 cpu.
18418 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
18420 Date: Tue May 30 09:10:32 2006 -0500
18422 Improve "reset" command's interaction with watchdog.
18424 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
18425 "reset altbank wd" will reset another bank WITH watch dog enabled
18426 "diswd" will disable watch dog after u-boot boots up successfully
18430 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
18432 Date: Tue May 30 08:51:19 2006 -0500
18434 Fix two SDRAM setup bugs.
18437 Enable 1T/2T based on number of DIMMs present.
18441 commit d11fec5015334deb2010e36ce00bb118cc5429a5
18443 Date: Fri May 26 10:24:48 2006 -0500
18445 Add first draft of the MPC8641HPCN doc/README.
18449 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
18451 Date: Fri May 26 10:13:04 2006 -0500
18453 Added pci@8000 block.
18454 Updated ethernet interrupt mappings (moved up 48).
18455 Cleaned up a few comments.
18459 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
18461 Date: Fri May 26 10:01:16 2006 -0500
18463 Allow args on reset command.
18467 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
18469 Date: Tue May 23 13:38:35 2006 +0200
18471 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
18472 fixes to the latter.
18474 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
18476 Date: Tue May 23 10:33:11 2006 +0200
18478 More cleanup for the delta board and the generic usb_ohci driver. Added
18479 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
18480 initialization and cleanup hooks respectively.
18482 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
18484 Date: Mon May 22 16:33:54 2006 +0200
18486 This patch adds USB storage support for the delta board. This is the first
18487 board to make use of a generic OHCI driver, that calls hooks for board
18488 dependant initialization.
18490 commit 14e37081ff3cac7ebe6e93836523429853b6b292
18492 Date: Fri May 19 13:28:39 2006 -0500
18494 Change arbitration to round-robin for SMP linux.
18496 commit 9a655876e5995be80f49054e2509500e871e4d3a
18498 Date: Fri May 19 13:26:34 2006 -0500
18500 Enable dual DDR controllers and interleaving.
18502 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
18504 Date: Fri May 19 13:22:44 2006 -0500
18506 Update 86xx address map and LAWBARs.
18508 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
18510 Date: Fri May 19 13:14:15 2006 -0500
18512 Remove L2 Cache invalidate polling.
18514 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
18516 Date: Fri May 19 12:33:09 2006 -0500
18518 Enable 2nd CPU and I2C.
18520 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
18522 Date: Mon May 15 07:26:56 2006 -0500
18524 Update interrupt mapping.
18526 commit 6cfea33477b04b63ed47386ed1629529484c33ba
18528 Date: Wed May 10 09:38:06 2006 -0500
18530 Remove unneeded INIT_RAM_LOCK cache twiddling.
18531 Correctly tracks r29 as global data pointer now.
18535 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
18537 Date: Wed May 10 09:33:07 2006 -0500
18539 Remove unnecessary flash.c file.
18541 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
18543 Date: Tue May 9 08:23:49 2006 -0500
18545 Get MPC8641HPCN flash images working.
18547 Enable the CFI driver.
18548 Remove bogus LAWBAR7 cruft.
18549 Use correct TEXT_BASE, Fixup load script.
18550 Enable SPD EEPROM during DDR setup.
18551 Use generic RFC 1918 IP addresses by default.
18553 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
18555 Date: Thu Apr 27 10:15:16 2006 -0500
18557 Cleanup whitespaces and style issues.
18558 Removed //-style comments.
18559 Use 80-column lines.
18560 Remove trailing whitespace.
18561 Remove dead code and debug cruft.
18563 commit a2320a6bf8113a09544c42d160d10ac69d049a03
18565 Date: Thu Apr 27 08:22:39 2006 -0500
18567 Revert bad PCI prefetch limit change.
18569 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
18571 Date: Wed Apr 26 17:58:56 2006 -0500
18573 Initial support for MPC8641 HPCN board.
projects / J-u-boot.git / blob