drivers/ram/imxrt_sdram.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2019
   4  * Author(s): Giulio Benetti <[email protected]>
   5  */
   6
   7 #include <common.h>
   8 #include <clk.h>
   9 #include <dm.h>
  10 #include <ram.h>
  11 #include <asm/io.h>
  12
  13 /* SDRAM Command Code */
  14 #define SD_CC_ARD               0x0     /* Master Bus (AXI) command - Read */
  15 #define SD_CC_AWR               0x1     /* Master Bus (AXI) command - Write */
  16 #define SD_CC_IRD               0x8     /* IP command - Read */
  17 #define SD_CC_IWR               0x9     /* IP command - Write */
  18 #define SD_CC_IMS               0xA     /* IP command - Set Mode Register */
  19 #define SD_CC_IACT              0xB     /* IP command - ACTIVE */
  20 #define SD_CC_IAF               0xC     /* IP command - Auto Refresh */
  21 #define SD_CC_ISF               0xD     /* IP Command - Self Refresh */
  22 #define SD_CC_IPRE              0xE     /* IP command - Precharge */
  23 #define SD_CC_IPREA             0xF     /* IP command - Precharge ALL */
  24
  25 #define SEMC_MCR_MDIS           BIT(1)
  26 #define SEMC_MCR_DQSMD          BIT(2)
  27
  28 #define SEMC_INTR_IPCMDERR      BIT(1)
  29 #define SEMC_INTR_IPCMDDONE     BIT(0)
  30
  31 #define SEMC_IPCMD_KEY          0xA55A0000
  32
  33 struct imxrt_semc_regs {
  34         /* 0x0 */
  35         u32 mcr;
  36         u32 iocr;
  37         u32 bmcr0;
  38         u32 bmcr1;
  39         u32 br[9];
  40
  41         /* 0x34 */
  42         u32 res1;
  43         u32 inten;
  44         u32 intr;
  45         /* 0x40 */
  46         u32 sdramcr0;
  47         u32 sdramcr1;
  48         u32 sdramcr2;
  49         u32 sdramcr3;
  50         /* 0x50 */
  51         u32 nandcr0;
  52         u32 nandcr1;
  53         u32 nandcr2;
  54         u32 nandcr3;
  55         /* 0x60 */
  56         u32 norcr0;
  57         u32 norcr1;
  58         u32 norcr2;
  59         u32 norcr3;
  60         /* 0x70 */
  61         u32 sramcr0;
  62         u32 sramcr1;
  63         u32 sramcr2;
  64         u32 sramcr3;
  65         /* 0x80 */
  66         u32 dbicr0;
  67         u32 dbicr1;
  68         u32 res2[2];
  69         /* 0x90 */
  70         u32 ipcr0;
  71         u32 ipcr1;
  72         u32 ipcr2;
  73         u32 ipcmd;
  74         /* 0xA0 */
  75         u32 iptxdat;
  76         u32 res3[3];
  77         /* 0xB0 */
  78         u32 iprxdat;
  79         u32 res4[3];
  80         /* 0xC0 */
  81         u32 sts[16];
  82 };
  83
  84 #define SEMC_IOCR_MUX_A8_SHIFT          0
  85 #define SEMC_IOCR_MUX_CSX0_SHIFT        3
  86 #define SEMC_IOCR_MUX_CSX1_SHIFT        6
  87 #define SEMC_IOCR_MUX_CSX2_SHIFT        9
  88 #define SEMC_IOCR_MUX_CSX3_SHIFT        12
  89 #define SEMC_IOCR_MUX_RDY_SHIFT         15
  90
  91 struct imxrt_sdram_mux {
  92         u8 a8;
  93         u8 csx0;
  94         u8 csx1;
  95         u8 csx2;
  96         u8 csx3;
  97         u8 rdy;
  98 };
  99
 100 #define SEMC_SDRAMCR0_PS_SHIFT          0
 101 #define SEMC_SDRAMCR0_BL_SHIFT          4
 102 #define SEMC_SDRAMCR0_COL_SHIFT         8
 103 #define SEMC_SDRAMCR0_CL_SHIFT          10
 104
 105 struct imxrt_sdram_control {
 106         u8 memory_width;
 107         u8 burst_len;
 108         u8 no_columns;
 109         u8 cas_latency;
 110 };
 111
 112 #define SEMC_SDRAMCR1_PRE2ACT_SHIFT     0
 113 #define SEMC_SDRAMCR1_ACT2RW_SHIFT      4
 114 #define SEMC_SDRAMCR1_RFRC_SHIFT        8
 115 #define SEMC_SDRAMCR1_WRC_SHIFT         13
 116 #define SEMC_SDRAMCR1_CKEOFF_SHIFT      16
 117 #define SEMC_SDRAMCR1_ACT2PRE_SHIFT     20
 118
 119 #define SEMC_SDRAMCR2_SRRC_SHIFT        0
 120 #define SEMC_SDRAMCR2_REF2REF_SHIFT     8
 121 #define SEMC_SDRAMCR2_ACT2ACT_SHIFT     16
 122 #define SEMC_SDRAMCR2_ITO_SHIFT         24
 123
 124 #define SEMC_SDRAMCR3_REN               BIT(0)
 125 #define SEMC_SDRAMCR3_REBL_SHIFT        1
 126 #define SEMC_SDRAMCR3_PRESCALE_SHIFT    8
 127 #define SEMC_SDRAMCR3_RT_SHIFT          16
 128 #define SEMC_SDRAMCR3_UT_SHIFT          24
 129
 130 struct imxrt_sdram_timing {
 131         u8 pre2act;
 132         u8 act2rw;
 133         u8 rfrc;
 134         u8 wrc;
 135         u8 ckeoff;
 136         u8 act2pre;
 137
 138         u8 srrc;
 139         u8 ref2ref;
 140         u8 act2act;
 141         u8 ito;
 142
 143         u8 rebl;
 144         u8 prescale;
 145         u8 rt;
 146         u8 ut;
 147 };
 148
 149 enum imxrt_semc_bank {
 150         SDRAM_BANK1,
 151         SDRAM_BANK2,
 152         SDRAM_BANK3,
 153         SDRAM_BANK4,
 154         MAX_SDRAM_BANK,
 155 };
 156
 157 #define SEMC_BR_VLD_MASK                1
 158 #define SEMC_BR_MS_SHIFT                1
 159
 160 struct bank_params {
 161         enum imxrt_semc_bank target_bank;
 162         u32 base_address;
 163         u32 memory_size;
 164 };
 165
 166 struct imxrt_sdram_params {
 167         struct imxrt_semc_regs *base;
 168
 169         struct imxrt_sdram_mux *sdram_mux;
 170         struct imxrt_sdram_control *sdram_control;
 171         struct imxrt_sdram_timing *sdram_timing;
 172
 173         struct bank_params bank_params[MAX_SDRAM_BANK];
 174         u8 no_sdram_banks;
 175 };
 176
 177 static int imxrt_sdram_wait_ipcmd_done(struct imxrt_semc_regs *regs)
 178 {
 179         do {
 180                 readl(&regs->intr);
 181
 182                 if (regs->intr & SEMC_INTR_IPCMDDONE)
 183                         return 0;
 184                 if (regs->intr & SEMC_INTR_IPCMDERR)
 185                         return -EIO;
 186
 187                 mdelay(50);
 188         } while (1);
 189 }
 190
 191 static int imxrt_sdram_ipcmd(struct imxrt_semc_regs *regs, u32 mem_addr,
 192                              u32 ipcmd, u32 wd, u32 *rd)
 193 {
 194         int ret;
 195
 196         if (ipcmd == SD_CC_IWR || ipcmd == SD_CC_IMS)
 197                 writel(wd, &regs->iptxdat);
 198
 199         /* set slave address for every command as specified on RM */
 200         writel(mem_addr, &regs->ipcr0);
 201
 202         /* execute command */
 203         writel(SEMC_IPCMD_KEY | ipcmd, &regs->ipcmd);
 204
 205         ret = imxrt_sdram_wait_ipcmd_done(regs);
 206         if (ret < 0)
 207                 return ret;
 208
 209         if (ipcmd == SD_CC_IRD) {
 210                 if (!rd)
 211                         return -EINVAL;
 212
 213                 *rd = readl(&regs->iprxdat);
 214         }
 215
 216         return 0;
 217 }
 218
 219 int imxrt_sdram_init(struct udevice *dev)
 220 {
 221         struct imxrt_sdram_params *params = dev_get_platdata(dev);
 222         struct imxrt_sdram_mux *mux = params->sdram_mux;
 223         struct imxrt_sdram_control *ctrl = params->sdram_control;
 224         struct imxrt_sdram_timing *time = params->sdram_timing;
 225         struct imxrt_semc_regs *regs = params->base;
 226         struct bank_params *bank_params;
 227         u32 rd;
 228         int i;
 229
 230         /* enable the SEMC controller */
 231         clrbits_le32(&regs->mcr, SEMC_MCR_MDIS);
 232         /* set DQS mode from DQS pad */
 233         setbits_le32(&regs->mcr, SEMC_MCR_DQSMD);
 234
 235         for (i = 0, bank_params = params->bank_params;
 236                 i < params->no_sdram_banks; bank_params++,
 237                 i++)
 238                 writel((bank_params->base_address & 0xfffff000)
 239                        | bank_params->memory_size << SEMC_BR_MS_SHIFT
 240                        | SEMC_BR_VLD_MASK,
 241                        &regs->br[bank_params->target_bank]);
 242
 243         writel(mux->a8 << SEMC_IOCR_MUX_A8_SHIFT
 244                 | mux->csx0 << SEMC_IOCR_MUX_CSX0_SHIFT
 245                 | mux->csx1 << SEMC_IOCR_MUX_CSX1_SHIFT
 246                 | mux->csx2 << SEMC_IOCR_MUX_CSX2_SHIFT
 247                 | mux->csx3 << SEMC_IOCR_MUX_CSX3_SHIFT
 248                 | mux->rdy << SEMC_IOCR_MUX_RDY_SHIFT,
 249                 &regs->iocr);
 250
 251         writel(ctrl->memory_width << SEMC_SDRAMCR0_PS_SHIFT
 252                 | ctrl->burst_len << SEMC_SDRAMCR0_BL_SHIFT
 253                 | ctrl->no_columns << SEMC_SDRAMCR0_COL_SHIFT
 254                 | ctrl->cas_latency << SEMC_SDRAMCR0_CL_SHIFT,
 255                 &regs->sdramcr0);
 256
 257         writel(time->pre2act << SEMC_SDRAMCR1_PRE2ACT_SHIFT
 258                 | time->act2rw << SEMC_SDRAMCR1_ACT2RW_SHIFT
 259                 | time->rfrc << SEMC_SDRAMCR1_RFRC_SHIFT
 260                 | time->wrc << SEMC_SDRAMCR1_WRC_SHIFT
 261                 | time->ckeoff << SEMC_SDRAMCR1_CKEOFF_SHIFT
 262                 | time->act2pre << SEMC_SDRAMCR1_ACT2PRE_SHIFT,
 263                 &regs->sdramcr1);
 264
 265         writel(time->srrc << SEMC_SDRAMCR2_SRRC_SHIFT
 266                 | time->ref2ref << SEMC_SDRAMCR2_REF2REF_SHIFT
 267                 | time->act2act << SEMC_SDRAMCR2_ACT2ACT_SHIFT
 268                 | time->ito << SEMC_SDRAMCR2_ITO_SHIFT,
 269                 &regs->sdramcr2);
 270
 271         writel(time->rebl << SEMC_SDRAMCR3_REBL_SHIFT
 272                 | time->prescale << SEMC_SDRAMCR3_PRESCALE_SHIFT
 273                 | time->rt << SEMC_SDRAMCR3_RT_SHIFT
 274                 | time->ut << SEMC_SDRAMCR3_UT_SHIFT
 275                 | SEMC_SDRAMCR3_REN,
 276                 &regs->sdramcr3);
 277
 278         writel(2, &regs->ipcr1);
 279
 280         for (i = 0, bank_params = params->bank_params;
 281                 i < params->no_sdram_banks; bank_params++,
 282                 i++) {
 283                 mdelay(250);
 284                 imxrt_sdram_ipcmd(regs, bank_params->base_address, SD_CC_IPREA,
 285                                   0, &rd);
 286                 imxrt_sdram_ipcmd(regs, bank_params->base_address, SD_CC_IAF,
 287                                   0, &rd);
 288                 imxrt_sdram_ipcmd(regs, bank_params->base_address, SD_CC_IAF,
 289                                   0, &rd);
 290                 imxrt_sdram_ipcmd(regs, bank_params->base_address, SD_CC_IMS,
 291                                   ctrl->burst_len | (ctrl->cas_latency << 4),
 292                                   &rd);
 293                 mdelay(250);
 294         }
 295
 296         return 0;
 297 }
 298
 299 static int imxrt_semc_ofdata_to_platdata(struct udevice *dev)
 300 {
 301         struct imxrt_sdram_params *params = dev_get_platdata(dev);
 302         ofnode bank_node;
 303         u8 bank = 0;
 304
 305         params->sdram_mux =
 306                 (struct imxrt_sdram_mux *)
 307                  dev_read_u8_array_ptr(dev,
 308                                        "fsl,sdram-mux",
 309                                        sizeof(struct imxrt_sdram_mux));
 310         if (!params->sdram_mux) {
 311                 pr_err("fsl,sdram-mux not found");
 312                 return -EINVAL;
 313         }
 314
 315         params->sdram_control =
 316                 (struct imxrt_sdram_control *)
 317                  dev_read_u8_array_ptr(dev,
 318                                        "fsl,sdram-control",
 319                                        sizeof(struct imxrt_sdram_control));
 320         if (!params->sdram_control) {
 321                 pr_err("fsl,sdram-control not found");
 322                 return -EINVAL;
 323         }
 324
 325         params->sdram_timing =
 326                 (struct imxrt_sdram_timing *)
 327                  dev_read_u8_array_ptr(dev,
 328                                        "fsl,sdram-timing",
 329                                        sizeof(struct imxrt_sdram_timing));
 330         if (!params->sdram_timing) {
 331                 pr_err("fsl,sdram-timing not found");
 332                 return -EINVAL;
 333         }
 334
 335         dev_for_each_subnode(bank_node, dev) {
 336                 struct bank_params *bank_params;
 337                 char *bank_name;
 338                 int ret;
 339
 340                 /* extract the bank index from DT */
 341                 bank_name = (char *)ofnode_get_name(bank_node);
 342                 strsep(&bank_name, "@");
 343                 if (!bank_name) {
 344                         pr_err("missing sdram bank index");
 345                         return -EINVAL;
 346                 }
 347
 348                 bank_params = &params->bank_params[bank];
 349                 strict_strtoul(bank_name, 10,
 350                                (unsigned long *)&bank_params->target_bank);
 351                 if (bank_params->target_bank >= MAX_SDRAM_BANK) {
 352                         pr_err("Found bank %d , but only bank 0,1,2,3 are supported",
 353                                bank_params->target_bank);
 354                         return -EINVAL;
 355                 }
 356
 357                 ret = ofnode_read_u32(bank_node,
 358                                       "fsl,memory-size",
 359                                       &bank_params->memory_size);
 360                 if (ret < 0) {
 361                         pr_err("fsl,memory-size not found");
 362                         return -EINVAL;
 363                 }
 364
 365                 ret = ofnode_read_u32(bank_node,
 366                                       "fsl,base-address",
 367                                       &bank_params->base_address);
 368                 if (ret < 0) {
 369                         pr_err("fsl,base-address not found");
 370                         return -EINVAL;
 371                 }
 372
 373                 debug("Found bank %s %u\n", bank_name,
 374                       bank_params->target_bank);
 375                 bank++;
 376         }
 377
 378         params->no_sdram_banks = bank;
 379         debug("%s, no of banks = %d\n", __func__, params->no_sdram_banks);
 380
 381         return 0;
 382 }
 383
 384 static int imxrt_semc_probe(struct udevice *dev)
 385 {
 386         struct imxrt_sdram_params *params = dev_get_platdata(dev);
 387         int ret;
 388         fdt_addr_t addr;
 389
 390         addr = dev_read_addr(dev);
 391         if (addr == FDT_ADDR_T_NONE)
 392                 return -EINVAL;
 393
 394         params->base = (struct imxrt_semc_regs *)addr;
 395
 396 #ifdef CONFIG_CLK
 397         struct clk clk;
 398
 399         ret = clk_get_by_index(dev, 0, &clk);
 400         if (ret < 0)
 401                 return ret;
 402
 403         ret = clk_enable(&clk);
 404
 405         if (ret) {
 406                 dev_err(dev, "failed to enable clock\n");
 407                 return ret;
 408         }
 409 #endif
 410         ret = imxrt_sdram_init(dev);
 411         if (ret)
 412                 return ret;
 413
 414         return 0;
 415 }
 416
 417 static int imxrt_semc_get_info(struct udevice *dev, struct ram_info *info)
 418 {
 419         return 0;
 420 }
 421
 422 static struct ram_ops imxrt_semc_ops = {
 423         .get_info = imxrt_semc_get_info,
 424 };
 425
 426 static const struct udevice_id imxrt_semc_ids[] = {
 427         { .compatible = "fsl,imxrt-semc", .data = 0 },
 428         { }
 429 };
 430
 431 U_BOOT_DRIVER(imxrt_semc) = {
 432         .name = "imxrt_semc",
 433         .id = UCLASS_RAM,
 434         .of_match = imxrt_semc_ids,
 435         .ops = &imxrt_semc_ops,
 436         .ofdata_to_platdata = imxrt_semc_ofdata_to_platdata,
 437         .probe = imxrt_semc_probe,
 438         .platdata_auto_alloc_size = sizeof(struct imxrt_sdram_params),
 439 };