include/configs/sniper.h

   1 /*
   2  * LG Optimus Black codename sniper config
   3  *
   4  * Copyright (C) 2015 Paul Kocialkowski <[email protected]>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/cpu.h>
  13 #include <asm/arch/omap.h>
  14
  15 /*
  16  * CPU
  17  */
  18
  19 #define CONFIG_ARM_ARCH_CP15_ERRATA
  20
  21 /*
  22  * Board
  23  */
  24
  25 #define CONFIG_MISC_INIT_R
  26
  27 /*
  28  * Clocks
  29  */
  30
  31 #define CONFIG_SYS_TIMERBASE    OMAP34XX_GPT2
  32 #define CONFIG_SYS_PTV          2
  33
  34 #define V_NS16550_CLK           48000000
  35 #define V_OSCK                  26000000
  36 #define V_SCLK                  (V_OSCK >> 1)
  37
  38 /*
  39  * DRAM
  40  */
  41
  42 #define CONFIG_NR_DRAM_BANKS    2
  43 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
  44 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
  45
  46 /*
  47  * Memory
  48  */
  49
  50 #define CONFIG_SYS_TEXT_BASE            0x80100000
  51 #define CONFIG_SYS_SDRAM_BASE           0x80000000
  52 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
  53                                          GENERATED_GBL_DATA_SIZE)
  54
  55 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024 + CONFIG_ENV_SIZE)
  56
  57 /*
  58  * I2C
  59  */
  60
  61 #define CONFIG_SYS_I2C
  62 #define CONFIG_SYS_OMAP24_I2C_SPEED     400000
  63 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
  64 #define CONFIG_I2C_MULTI_BUS
  65
  66 /*
  67  * Input
  68  */
  69
  70 #define CONFIG_TWL4030_INPUT
  71
  72 /*
  73  * SPL
  74  */
  75
  76 #define CONFIG_SPL_FRAMEWORK
  77
  78 #define CONFIG_SPL_TEXT_BASE            0x40200000
  79 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
  80                                          CONFIG_SPL_TEXT_BASE)
  81 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
  82 #define CONFIG_SPL_BSS_MAX_SIZE         (512 * 1024)
  83 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
  84 #define CONFIG_SYS_SPL_MALLOC_SIZE      (1024 * 1024)
  85 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
  86
  87 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION              1
  88 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                 "u-boot.img"
  89
  90 #define CONFIG_AUTO_COMPLETE
  91
  92 #define CONFIG_SYS_LONGHELP
  93
  94 #define CONFIG_SYS_CBSIZE       512
  95
  96 /*
  97  * Serial
  98  */
  99
 100 #ifdef CONFIG_SPL_BUILD
 101 #define CONFIG_SYS_NS16550_SERIAL
 102 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
 103 #endif
 104
 105 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
 106 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
 107 #define CONFIG_CONS_INDEX               3
 108
 109 #define CONFIG_SYS_BAUDRATE_TABLE       { 4800, 9600, 19200, 38400, 57600, \
 110                                           115200 }
 111
 112 /*
 113  * USB gadget
 114  */
 115
 116 #define CONFIG_TWL4030_USB
 117
 118 /*
 119  * Environment
 120  */
 121
 122 #define CONFIG_ENV_SIZE         (128 * 1024)
 123
 124 #define CONFIG_ENV_OVERWRITE
 125
 126 #define CONFIG_EXTRA_ENV_SETTINGS \
 127         "kernel_addr_r=0x82000000\0" \
 128         "loadaddr=0x82000000\0" \
 129         "fdt_addr_r=0x88000000\0" \
 130         "fdtaddr=0x88000000\0" \
 131         "ramdisk_addr_r=0x88080000\0" \
 132         "pxefile_addr_r=0x80100000\0" \
 133         "scriptaddr=0x80000000\0" \
 134         "bootm_size=0x10000000\0" \
 135         "boot_mmc_dev=0\0" \
 136         "kernel_mmc_part=3\0" \
 137         "recovery_mmc_part=4\0" \
 138         "fdtfile=omap3-sniper.dtb\0" \
 139         "bootfile=/boot/extlinux/extlinux.conf\0" \
 140         "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
 141
 142 /*
 143  * ATAGs
 144  */
 145
 146 #define CONFIG_SETUP_MEMORY_TAGS
 147 #define CONFIG_CMDLINE_TAG
 148 #define CONFIG_INITRD_TAG
 149 #define CONFIG_REVISION_TAG
 150 #define CONFIG_SERIAL_TAG
 151
 152 /*
 153  * Boot
 154  */
 155
 156 #define CONFIG_SYS_LOAD_ADDR    0x82000000
 157
 158 #define CONFIG_BOOTCOMMAND \
 159         "setenv boot_mmc_part ${kernel_mmc_part}; " \
 160         "if test reboot-${reboot-mode} = reboot-r; then " \
 161         "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
 162         "if test reboot-${reboot-mode} = reboot-b; then " \
 163         "echo fastboot; fastboot 0; fi; " \
 164         "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
 165         "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
 166         "mmc dev ${boot_mmc_dev}; " \
 167         "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
 168         "bootm ${kernel_addr_r};"
 169
 170 /*
 171  * Defaults
 172  */
 173
 174 #include <config_defaults.h>
 175 #include <config_distro_defaults.h>
 176
 177 #endif