board/freescale/t208xqds/t208xqds.c

   1 /*
   2  * Copyright 2009-2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <command.h>
   9 #include <i2c.h>
  10 #include <netdev.h>
  11 #include <linux/compiler.h>
  12 #include <asm/mmu.h>
  13 #include <asm/processor.h>
  14 #include <asm/immap_85xx.h>
  15 #include <asm/fsl_law.h>
  16 #include <asm/fsl_serdes.h>
  17 #include <asm/fsl_portals.h>
  18 #include <asm/fsl_liodn.h>
  19 #include <fm_eth.h>
  20
  21 #include "../common/qixis.h"
  22 #include "../common/vsc3316_3308.h"
  23 #include "t208xqds.h"
  24 #include "t208xqds_qixis.h"
  25
  26 DECLARE_GLOBAL_DATA_PTR;
  27
  28 int checkboard(void)
  29 {
  30         char buf[64];
  31         u8 sw;
  32         struct cpu_type *cpu = gd->arch.cpu;
  33         static const char *freq[4] = {
  34                 "100.00MHZ(from 8T49N222A)", "125.00MHz",
  35                 "156.25MHZ", "100.00MHz"
  36         };
  37
  38         printf("Board: %sQDS, ", cpu->name);
  39         sw = QIXIS_READ(arch);
  40         printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
  41         printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
  42
  43 #ifdef CONFIG_SDCARD
  44         puts("SD/MMC\n");
  45 #elif CONFIG_SPIFLASH
  46         puts("SPI\n");
  47 #else
  48         sw = QIXIS_READ(brdcfg[0]);
  49         sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
  50
  51         if (sw < 0x8)
  52                 printf("vBank%d\n", sw);
  53         else if (sw == 0x8)
  54                 puts("Promjet\n");
  55         else if (sw == 0x9)
  56                 puts("NAND\n");
  57         else
  58                 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
  59 #endif
  60
  61         printf("FPGA: v%d (%s), build %d", (int)QIXIS_READ(scver),
  62                qixis_read_tag(buf), (int)qixis_read_minor());
  63         /* the timestamp string contains "\n" at the end */
  64         printf(" on %s", qixis_read_time(buf));
  65
  66         puts("SERDES Reference Clocks:\n");
  67         sw = QIXIS_READ(brdcfg[2]);
  68         printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[sw >> 6],
  69                freq[(sw >> 4) & 0x3]);
  70         printf("SD2_CLK1=%s, SD2_CLK2=%s\n", freq[(sw & 0xf) >> 2],
  71                freq[sw & 0x3]);
  72
  73         return 0;
  74 }
  75
  76 int select_i2c_ch_pca9547(u8 ch)
  77 {
  78         int ret;
  79
  80         ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
  81         if (ret) {
  82                 puts("PCA: failed to select proper channel\n");
  83                 return ret;
  84         }
  85
  86         return 0;
  87 }
  88
  89 int brd_mux_lane_to_slot(void)
  90 {
  91         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
  92         u32 srds_prtcl_s1;
  93
  94         srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
  95                                 FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
  96         srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
  97 #if defined(CONFIG_T2080QDS)
  98         u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
  99                                 FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 100         srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
 101 #endif
 102
 103         switch (srds_prtcl_s1) {
 104         case 0:
 105                 /* SerDes1 is not enabled */
 106                 break;
 107 #if defined(CONFIG_T2080QDS)
 108         case 0x1b:
 109         case 0x1c:
 110         case 0xa2:
 111                 /* SD1(A:D) => SLOT3 SGMII
 112                  * SD1(G:H) => SLOT1 SGMII
 113                  */
 114                 QIXIS_WRITE(brdcfg[12], 0x1a);
 115                 break;
 116         case 0x94:
 117         case 0x95:
 118                 /* SD1(A:B) => SLOT3 [email protected]
 119                  * SD1(C:D) => SFP Module, [email protected]
 120                  * SD1(E:H) => SLOT1 [email protected]
 121                  */
 122         case 0x96:
 123                 /* SD1(A:B) => SLOT3 [email protected]
 124                  * SD1(C)   => SFP Module, [email protected]
 125                  * SD1(D)   => SFP Module, [email protected]
 126                  * SD1(E:H) => SLOT1 PCIe4 x4
 127                  */
 128                 QIXIS_WRITE(brdcfg[12], 0x3a);
 129                 break;
 130         case 0x50:
 131         case 0x51:
 132                 /* SD1(A:D) => SLOT3 XAUI
 133                  * SD1(E)   => SLOT1 PCIe4
 134                  * SD1(F:H) => SLOT2 SGMII
 135                  */
 136                 QIXIS_WRITE(brdcfg[12], 0x15);
 137                 break;
 138         case 0x66:
 139         case 0x67:
 140                 /* SD1(A:D) => XFI cage
 141                  * SD1(E:H) => SLOT1 PCIe4
 142                  */
 143                 QIXIS_WRITE(brdcfg[12], 0xfe);
 144                 break;
 145         case 0x6a:
 146         case 0x6b:
 147                 /* SD1(A:D) => XFI cage
 148                  * SD1(E)   => SLOT1 PCIe4
 149                  * SD1(F:H) => SLOT2 SGMII
 150                  */
 151                 QIXIS_WRITE(brdcfg[12], 0xf1);
 152                 break;
 153         case 0x6c:
 154         case 0x6d:
 155                 /* SD1(A:B) => XFI cage
 156                  * SD1(C:D) => SLOT3 SGMII
 157                  * SD1(E:H) => SLOT1 PCIe4
 158                  */
 159                 QIXIS_WRITE(brdcfg[12], 0xda);
 160                 break;
 161         case 0x6e:
 162                 /* SD1(A:B) => SFP Module, XFI
 163                  * SD1(C:D) => SLOT3 SGMII
 164                  * SD1(E:F) => SLOT1 PCIe4 x2
 165                  * SD1(G:H) => SLOT2 SGMII
 166                  */
 167                 QIXIS_WRITE(brdcfg[12], 0xd9);
 168                 break;
 169         case 0xda:
 170                 /* SD1(A:H) => SLOT3 PCIe3 x8
 171                  */
 172                  QIXIS_WRITE(brdcfg[12], 0x0);
 173                  break;
 174         case 0xc8:
 175                 /* SD1(A)   => SLOT3 PCIe3 x1
 176                  * SD1(B)   => SFP Module, [email protected]
 177                  * SD1(C:D) => SFP Module, [email protected]
 178                  * SD1(E:F) => SLOT1 PCIe4 x2
 179                  * SD1(G:H) => SLOT2 SGMII
 180                  */
 181                  QIXIS_WRITE(brdcfg[12], 0x79);
 182                  break;
 183         case 0xab:
 184                 /* SD1(A:D) => SLOT3 PCIe3 x4
 185                  * SD1(E:H) => SLOT1 PCIe4 x4
 186                  */
 187                  QIXIS_WRITE(brdcfg[12], 0x1a);
 188                  break;
 189 #elif defined(CONFIG_T2081QDS)
 190         case 0x50:
 191         case 0x51:
 192                 /* SD1(A:D) => SLOT2 XAUI
 193                  * SD1(E)   => SLOT1 PCIe4 x1
 194                  * SD1(F:H) => SLOT3 SGMII
 195                  */
 196                 QIXIS_WRITE(brdcfg[12], 0x98);
 197                 QIXIS_WRITE(brdcfg[13], 0x70);
 198                 break;
 199         case 0x6a:
 200         case 0x6b:
 201                 /* SD1(A:D) => XFI SFP Module
 202                  * SD1(E)   => SLOT1 PCIe4 x1
 203                  * SD1(F:H) => SLOT3 SGMII
 204                  */
 205                 QIXIS_WRITE(brdcfg[12], 0x80);
 206                 QIXIS_WRITE(brdcfg[13], 0x70);
 207                 break;
 208         case 0x6c:
 209         case 0x6d:
 210                 /* SD1(A:B) => XFI SFP Module
 211                  * SD1(C:D) => SLOT2 SGMII
 212                  * SD1(E:H) => SLOT1 PCIe4 x4
 213                  */
 214                 QIXIS_WRITE(brdcfg[12], 0xe8);
 215                 QIXIS_WRITE(brdcfg[13], 0x0);
 216                 break;
 217         case 0xaa:
 218         case 0xab:
 219                 /* SD1(A:D) => SLOT2 PCIe3 x4
 220                  * SD1(F:H) => SLOT1 SGMI4 x4
 221                  */
 222                 QIXIS_WRITE(brdcfg[12], 0xf8);
 223                 QIXIS_WRITE(brdcfg[13], 0x0);
 224                 break;
 225         case 0xca:
 226         case 0xcb:
 227                 /* SD1(A)   => SLOT2 PCIe3 x1
 228                  * SD1(B)   => SLOT7 SGMII
 229                  * SD1(C)   => SLOT6 SGMII
 230                  * SD1(D)   => SLOT5 SGMII
 231                  * SD1(E)   => SLOT1 PCIe4 x1
 232                  * SD1(F:H) => SLOT3 SGMII
 233                  */
 234                 QIXIS_WRITE(brdcfg[12], 0x80);
 235                 QIXIS_WRITE(brdcfg[13], 0x70);
 236                 break;
 237         case 0xde:
 238         case 0xdf:
 239                 /* SD1(A:D) => SLOT2 PCIe3 x4
 240                  * SD1(E)   => SLOT1 PCIe4 x1
 241                  * SD1(F)   => SLOT4 PCIe1 x1
 242                  * SD1(G)   => SLOT3 PCIe2 x1
 243                  * SD1(H)   => SLOT7 SGMII
 244                  */
 245                 QIXIS_WRITE(brdcfg[12], 0x98);
 246                 QIXIS_WRITE(brdcfg[13], 0x25);
 247                 break;
 248         case 0xf2:
 249                 /* SD1(A)   => SLOT2 PCIe3 x1
 250                  * SD1(B:D) => SLOT7 SGMII
 251                  * SD1(E)   => SLOT1 PCIe4 x1
 252                  * SD1(F)   => SLOT4 PCIe1 x1
 253                  * SD1(G)   => SLOT3 PCIe2 x1
 254                  * SD1(H)   => SLOT7 SGMII
 255                  */
 256                 QIXIS_WRITE(brdcfg[12], 0x81);
 257                 QIXIS_WRITE(brdcfg[13], 0xa5);
 258                 break;
 259 #endif
 260         default:
 261                 printf("WARNING: unsupported for SerDes1 Protocol %d\n",
 262                        srds_prtcl_s1);
 263                 return -1;
 264         }
 265
 266 #ifdef CONFIG_T2080QDS
 267         switch (srds_prtcl_s2) {
 268         case 0:
 269                 /* SerDes2 is not enabled */
 270                 break;
 271         case 0x01:
 272         case 0x02:
 273                 /* SD2(A:H) => SLOT4 PCIe1 */
 274                 QIXIS_WRITE(brdcfg[13], 0x10);
 275                 break;
 276         case 0x15:
 277         case 0x16:
 278                 /*
 279                  * SD2(A:D) => SLOT4 PCIe1
 280                  * SD2(E:F) => SLOT5 PCIe2
 281                  * SD2(G:H) => SATA1,SATA2
 282                  */
 283                 QIXIS_WRITE(brdcfg[13], 0xb0);
 284                 break;
 285         case 0x18:
 286                 /*
 287                  * SD2(A:D) => SLOT4 PCIe1
 288                  * SD2(E:F) => SLOT5 Aurora
 289                  * SD2(G:H) => SATA1,SATA2
 290                  */
 291                 QIXIS_WRITE(brdcfg[13], 0x78);
 292                 break;
 293         case 0x1f:
 294                 /*
 295                  * SD2(A:D) => SLOT4 PCIe1
 296                  * SD2(E:H) => SLOT5 PCIe2
 297                  */
 298                 QIXIS_WRITE(brdcfg[13], 0xa0);
 299                 break;
 300         case 0x29:
 301         case 0x2d:
 302         case 0x2e:
 303                 /*
 304                  * SD2(A:D) => SLOT4 SRIO2
 305                  * SD2(E:H) => SLOT5 SRIO1
 306                  */
 307                 QIXIS_WRITE(brdcfg[13], 0xa0);
 308                 break;
 309         case 0x36:
 310                 /*
 311                  * SD2(A:D) => SLOT4 SRIO2
 312                  * SD2(E:F) => Aurora
 313                  * SD2(G:H) => SATA1,SATA2
 314                  */
 315                 QIXIS_WRITE(brdcfg[13], 0x78);
 316                 break;
 317         default:
 318                 printf("WARNING: unsupported for SerDes2 Protocol %d\n",
 319                        srds_prtcl_s2);
 320                 return -1;
 321         }
 322 #endif
 323         return 0;
 324 }
 325
 326 int board_early_init_r(void)
 327 {
 328         const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 329         int flash_esel = find_tlb_idx((void *)flashbase, 1);
 330
 331         /*
 332          * Remap Boot flash + PROMJET region to caching-inhibited
 333          * so that flash can be erased properly.
 334          */
 335
 336         /* Flush d-cache and invalidate i-cache of any FLASH data */
 337         flush_dcache();
 338         invalidate_icache();
 339
 340         if (flash_esel == -1) {
 341                 /* very unlikely unless something is messed up */
 342                 puts("Error: Could not find TLB for FLASH BASE\n");
 343                 flash_esel = 2; /* give our best effort to continue */
 344         } else {
 345                 /* invalidate existing TLB entry for flash + promjet */
 346                 disable_tlb(flash_esel);
 347         }
 348
 349         set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
 350                 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 351                 0, flash_esel, BOOKE_PAGESZ_256M, 1);
 352
 353         set_liodns();
 354 #ifdef CONFIG_SYS_DPAA_QBMAN
 355         setup_portals();
 356 #endif
 357
 358         /* Disable remote I2C connection to qixis fpga */
 359         QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
 360
 361         brd_mux_lane_to_slot();
 362         select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 363
 364         return 0;
 365 }
 366
 367 unsigned long get_board_sys_clk(void)
 368 {
 369         u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
 370 #ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
 371         /* use accurate clock measurement */
 372         int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]);
 373         int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
 374         u32 val;
 375
 376         val =  freq * base;
 377         if (val) {
 378                 debug("SYS Clock measurement is: %d\n", val);
 379                 return val;
 380         } else {
 381                 printf("Warning: SYS clock measurement is invalid, ");
 382                 printf("using value from brdcfg1.\n");
 383         }
 384 #endif
 385
 386         switch (sysclk_conf & 0x0F) {
 387         case QIXIS_SYSCLK_83:
 388                 return 83333333;
 389         case QIXIS_SYSCLK_100:
 390                 return 100000000;
 391         case QIXIS_SYSCLK_125:
 392                 return 125000000;
 393         case QIXIS_SYSCLK_133:
 394                 return 133333333;
 395         case QIXIS_SYSCLK_150:
 396                 return 150000000;
 397         case QIXIS_SYSCLK_160:
 398                 return 160000000;
 399         case QIXIS_SYSCLK_166:
 400                 return 166666666;
 401         }
 402         return 66666666;
 403 }
 404
 405 unsigned long get_board_ddr_clk(void)
 406 {
 407         u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
 408 #ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
 409         /* use accurate clock measurement */
 410         int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]);
 411         int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
 412         u32 val;
 413
 414         val =  freq * base;
 415         if (val) {
 416                 debug("DDR Clock measurement is: %d\n", val);
 417                 return val;
 418         } else {
 419                 printf("Warning: DDR clock measurement is invalid, ");
 420                 printf("using value from brdcfg1.\n");
 421         }
 422 #endif
 423
 424         switch ((ddrclk_conf & 0x30) >> 4) {
 425         case QIXIS_DDRCLK_100:
 426                 return 100000000;
 427         case QIXIS_DDRCLK_125:
 428                 return 125000000;
 429         case QIXIS_DDRCLK_133:
 430                 return 133333333;
 431         }
 432         return 66666666;
 433 }
 434
 435 int misc_init_r(void)
 436 {
 437         return 0;
 438 }
 439
 440 int ft_board_setup(void *blob, bd_t *bd)
 441 {
 442         phys_addr_t base;
 443         phys_size_t size;
 444
 445         ft_cpu_setup(blob, bd);
 446
 447         base = getenv_bootm_low();
 448         size = getenv_bootm_size();
 449
 450         fdt_fixup_memory(blob, (u64)base, (u64)size);
 451
 452 #ifdef CONFIG_PCI
 453         pci_of_setup(blob, bd);
 454 #endif
 455
 456         fdt_fixup_liodn(blob);
 457         fdt_fixup_dr_usb(blob, bd);
 458
 459 #ifdef CONFIG_SYS_DPAA_FMAN
 460         fdt_fixup_fman_ethernet(blob);
 461         fdt_fixup_board_enet(blob);
 462 #endif
 463
 464         return 0;
 465 }