include/configs/mx51evk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2007, Guennadi Liakhovetski <[email protected]>
   4  *
   5  * (C) Copyright 2009 Freescale Semiconductor, Inc.
   6  *
   7  * Configuration settings for the MX51EVK Board
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13  /* High Level Configuration Options */
  14
  15 #define CONFIG_SYS_FSL_CLK
  16
  17 #include <asm/arch/imx-regs.h>
  18
  19 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  20 #define CONFIG_SETUP_MEMORY_TAGS
  21 #define CONFIG_INITRD_TAG
  22 #define CONFIG_REVISION_TAG
  23
  24 #define CONFIG_MACH_TYPE        MACH_TYPE_MX51_BABBAGE
  25 /*
  26  * Size of malloc() pool
  27  */
  28 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  29
  30 /*
  31  * Hardware drivers
  32  */
  33 #define CONFIG_FSL_IIM
  34
  35 #define CONFIG_MXC_UART
  36 #define CONFIG_MXC_UART_BASE    UART1_BASE
  37
  38 /* PMIC Controller */
  39 #define CONFIG_POWER
  40 #define CONFIG_POWER_SPI
  41 #define CONFIG_POWER_FSL
  42 #define CONFIG_FSL_PMIC_BUS     0
  43 #define CONFIG_FSL_PMIC_CS      0
  44 #define CONFIG_FSL_PMIC_CLK     2500000
  45 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  46 #define CONFIG_FSL_PMIC_BITLEN  32
  47 #define CONFIG_RTC_MC13XXX
  48
  49 /*
  50  * MMC Configs
  51  * */
  52 #define CONFIG_SYS_FSL_ESDHC_ADDR       MMC_SDHC1_BASE_ADDR
  53 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  54
  55 /*
  56  * Eth Configs
  57  */
  58 #define CONFIG_MII
  59
  60 #define CONFIG_FEC_MXC
  61 #define IMX_FEC_BASE    FEC_BASE_ADDR
  62 #define CONFIG_FEC_MXC_PHYADDR  0x1F
  63
  64 /* USB Configs */
  65 #define CONFIG_USB_EHCI_MX5
  66 #define CONFIG_MXC_USB_PORT     1
  67 #define CONFIG_MXC_USB_PORTSC   PORT_PTS_ULPI
  68 #define CONFIG_MXC_USB_FLAGS    MXC_EHCI_POWER_PINS_ENABLED
  69
  70 /* Framebuffer and LCD */
  71 #define CONFIG_PREBOOT
  72 #define CONFIG_VIDEO_IPUV3
  73 #define CONFIG_VIDEO_BMP_RLE8
  74 #define CONFIG_SPLASH_SCREEN
  75 #define CONFIG_BMP_16BPP
  76 #define CONFIG_VIDEO_LOGO
  77
  78 /* allow to overwrite serial and ethaddr */
  79 #define CONFIG_ENV_OVERWRITE
  80
  81 #define CONFIG_ETHPRIME         "FEC0"
  82
  83 #define CONFIG_LOADADDR         0x92000000      /* loadaddr env var */
  84
  85 #define CONFIG_EXTRA_ENV_SETTINGS \
  86         "script=boot.scr\0" \
  87         "image=zImage\0" \
  88         "fdt_file=imx51-babbage.dtb\0" \
  89         "fdt_addr=0x91000000\0" \
  90         "boot_fdt=try\0" \
  91         "ip_dyn=yes\0" \
  92         "mmcdev=0\0" \
  93         "mmcpart=1\0" \
  94         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  95         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
  96                 "root=${mmcroot}\0" \
  97         "loadbootscript=" \
  98                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  99         "bootscript=echo Running bootscript from mmc ...; " \
 100                 "source\0" \
 101         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 102         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 103         "mmcboot=echo Booting from mmc ...; " \
 104                 "run mmcargs; " \
 105                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 106                         "if run loadfdt; then " \
 107                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 108                         "else " \
 109                                 "if test ${boot_fdt} = try; then " \
 110                                         "bootz; " \
 111                                 "else " \
 112                                         "echo WARN: Cannot load the DT; " \
 113                                 "fi; " \
 114                         "fi; " \
 115                 "else " \
 116                         "bootz; " \
 117                 "fi;\0" \
 118         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 119                 "root=/dev/nfs " \
 120                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 121         "netboot=echo Booting from net ...; " \
 122                 "run netargs; " \
 123                 "if test ${ip_dyn} = yes; then " \
 124                         "setenv get_cmd dhcp; " \
 125                 "else " \
 126                         "setenv get_cmd tftp; " \
 127                 "fi; " \
 128                 "${get_cmd} ${image}; " \
 129                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 130                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 131                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 132                         "else " \
 133                                 "if test ${boot_fdt} = try; then " \
 134                                         "bootz; " \
 135                                 "else " \
 136                                         "echo ERROR: Cannot load the DT; " \
 137                                         "exit; " \
 138                                 "fi; " \
 139                         "fi; " \
 140                 "else " \
 141                         "bootz; " \
 142                 "fi;\0"
 143
 144 #define CONFIG_BOOTCOMMAND \
 145         "mmc dev ${mmcdev}; if mmc rescan; then " \
 146                 "if run loadbootscript; then " \
 147                         "run bootscript; " \
 148                 "else " \
 149                         "if run loadimage; then " \
 150                                 "run mmcboot; " \
 151                         "else run netboot; " \
 152                         "fi; " \
 153                 "fi; " \
 154         "else run netboot; fi"
 155
 156 #define CONFIG_ARP_TIMEOUT      200UL
 157
 158 /*
 159  * Miscellaneous configurable options
 160  */
 161
 162 #define CONFIG_SYS_MEMTEST_START       0x90000000
 163 #define CONFIG_SYS_MEMTEST_END         0x90010000
 164
 165 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 166
 167 /*-----------------------------------------------------------------------
 168  * Physical Memory Map
 169  */
 170 #define CONFIG_NR_DRAM_BANKS    1
 171 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 172 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
 173
 174 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 175 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 176 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 177
 178 #define CONFIG_SYS_INIT_SP_OFFSET \
 179         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 180 #define CONFIG_SYS_INIT_SP_ADDR \
 181         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 182
 183 #define CONFIG_SYS_DDR_CLKSEL   0
 184 #define CONFIG_SYS_CLKTL_CBCDR  0x59E35100
 185 #define CONFIG_SYS_MAIN_PWR_ON
 186
 187 /*-----------------------------------------------------------------------
 188  * environment organization
 189  */
 190 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 191 #define CONFIG_ENV_SIZE        (8 * 1024)
 192 #define CONFIG_SYS_MMC_ENV_DEV 0
 193
 194 #endif