configs/s5p4418_nanopi2_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_NEXELL=y
   3 CONFIG_ARCH_S5P4418=y
   4 CONFIG_TARGET_NANOPI2=y
   5 CONFIG_DEFAULT_DEVICE_TREE="s5p4418-nanopi2"
   6 CONFIG_FIT=y
   7
   8 CONFIG_SYS_MEMTEST_START=0x71000000
   9 CONFIG_SYS_MEMTEST_END=0xb0000000
  10
  11 CONFIG_CMD_MEMTEST=y
  12 # CONFIG_CMD_IMLS is not set
  13 # CONFIG_CMD_FLASH is not set
  14 CONFIG_CMD_I2C=y
  15 # CONFIG_CMD_FPGA is not set
  16 CONFIG_CMD_GPIO=y
  17 # CONFIG_CMD_SETEXPR is not set
  18 # CONFIG_CMD_NET is not set
  19
  20 # Default is CONFIG_NET=y, in this case:
  21 #   Loading Environment from MMC... ## Warning: Unknown environment variable type 'm'
  22 #   OK
  23 # CONFIG_CMD_NET=y must be set to avoid this Warning. But then:
  24 #   Net:   Net Initialization Skipped
  25 #   No ethernet found.
  26 # If CONFIG_NET=n is set additionally warning at "make s5p4418_nanopi2_defconfig":
  27 #    arch/../configs/s5p4418_nanopi2_defconfig:24:warning: override: reassigning to symbol CMD_NET
  28 #
  29 # --> CONFIG_NET=n set only
  30 CONFIG_NET=n
  31
  32 # CONFIG_CMD_NFS is not set
  33 CONFIG_CMD_FDISK=y
  34 CONFIG_CMD_EXT4_IMG_WRITE=y
  35 CONFIG_CMD_SD_RECOVERY=y
  36 CONFIG_CMD_PMIC=y
  37 CONFIG_CMD_REGULATOR=y
  38
  39 CONFIG_PINCTRL=y
  40 CONFIG_DM_GPIO=y
  41 CONFIG_DM_I2C=y
  42 CONFIG_SYS_I2C_NEXELL=y
  43 CONFIG_DM_PMIC=y
  44 CONFIG_DM_PMIC_AXP228=y
  45 CONFIG_DM_REGULATOR=y
  46 CONFIG_DM_REGULATOR_AXP228=y
  47 CONFIG_DM_PWM=n
  48
  49 CONFIG_DISPLAY=y
  50 CONFIG_DM_VIDEO=y
  51 CONFIG_SYS_CONSOLE_BG_COL=0xff
  52 CONFIG_SYS_CONSOLE_FG_COL=0x00
  53 CONFIG_VIDEO_NX=y
  54 CONFIG_VIDEO_NX_RGB=y
  55 CONFIG_VIDEO_NX_LVDS=y
  56 CONFIG_VIDEO_NX_HDMI=y
  57 CONFIG_CMD_BMP=y
  58
  59 ## LCD backlight control
  60 CONFIG_S5P4418_ONEWIRE=y
  61 CONFIG_PWM_NX is not set
  62
  63 CONFIG_REGEX=y
  64 CONFIG_ERRNO_STR=y
  65
  66 CONFIG_SYS_TEXT_BASE=0x74C00000
  67 CONFIG_NR_DRAM_BANKS=1
  68 CONFIG_SYS_CACHELINE_SIZE=64
  69
  70 ## System initialize options (board_init_f)
  71 # board_init_f->init_sequence, call board_early_init_f
  72 CONFIG_BOARD_LATE_INIT=y
  73 # board_init_f->init_sequence, call print_cpuinfo
  74 CONFIG_DISPLAY_CPUINFO=y
  75 # board_init_f->init_sequence, call show_board_info
  76 CONFIG_DISPLAY_BOARDINFO=y
  77 # board_init_f, CONFIG_SYS_ICACHE_OFF
  78 CONFIG_SYS_DCACHE_OFF=y
  79 # board_init_r, call arch_misc_init
  80 CONFIG_ARCH_MISC_INIT=y
  81
  82 CONFIG_BOOTDELAY=1
  83 CONFIG_ZERO_BOOTDELAY_CHECK=y
  84
  85 ## U-Boot Environments
  86 ## refer to common/env_common.c
  87
  88 # CONFIG_ENV_IS_IN_MMC must be set here and not in s5p4418_nanopi2.h
  89 # otherwise CONFIG_ENV_IS_NOWHERE is set by env/Kconfig and environment
  90 # (bootargs) are not loaded
  91 CONFIG_ENV_IS_IN_MMC=y
  92 CONFIG_ENV_OFFSET=0x2E0200
  93 CONFIG_ENV_SIZE=0x4000
  94 CONFIG_CMD_SAVEENV=y
  95
  96 ## Etc Command definition
  97 # image info
  98 CONFIG_CMD_IMI=y
  99 # add command line history
 100 CONFIG_CMDLINE_EDITING=y
 101 CONFIG_CMDLINE_TAG=y
 102 CONFIG_INITRD_TAG=y
 103 CONFIG_SUPPORT_RAW_INITRD=y
 104 CONFIG_REVISION_TAG=y
 105 CONFIG_CMD_BOOTZ=y
 106
 107 ## serial console configuration
 108 CONFIG_CONS_INDEX=0
 109 CONFIG_BAUDRATE=115200
 110
 111 ## SD/MMC
 112 CONFIG_BOUNCE_BUFFER=y
 113 CONFIG_GENERIC_MMC=y
 114 CONFIG_MMC=y
 115 CONFIG_MMC_DW=y
 116 CONFIG_NEXELL_DWMMC=y
 117 CONFIG_CMD_MMC=y
 118 CONFIG_DM_MMC=y
 119
 120 CONFIG_DOS_PARTITION=y
 121 CONFIG_CMD_FAT=y
 122 CONFIG_FS_FAT=y
 123 CONFIG_FAT_WRITE=y
 124
 125 CONFIG_CMD_EXT4=y
 126 CONFIG_CMD_EXT4_WRITE=y
 127 CONFIG_FS_EXT4=y
 128 CONFIG_EXT4_WRITE=y
 129
 130 ## OF_CONTROL
 131 CONFIG_FIT_BEST_MATCH=y
 132 CONFIG_OF_LIBFDT=y
 133 CONFIG_OF_BOARD_SETUP=y
 134
 135 ## BOOTCOMMAND
 136 CONFIG_ROOT_DEV=1
 137 CONFIG_BOOT_PART=1
 138 CONFIG_ROOT_PART=2
 139
 140 # necessary for if-cmd
 141 CONFIG_HUSH_PARSER=y
 142
 143 # set to 'n' to save memory
 144 CONFIG_SYS_LONGHELP=y
 145
 146 # For debugging (trace) of MMC-CMDs
 147 CONFIG_MMC_TRACE=n