1 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
3 Date: Wed Nov 14 18:58:33 2007 +0100
5 Fix the i2c frequency and default address in rsdproto board
7 rsdproto board support has wrong I2C frequency and wrong return value
12 commit 429c180edad038f91c989cb14b478228092e7054
14 Date: Sat Nov 17 01:45:38 2007 +0100
16 powerpc: Backout relocation changes for MPC5121, too.
18 Apply Grant Likely's backout to MPC5121 code, too.
24 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
26 Date: Tue Nov 13 22:18:33 2007 -0700
28 powerpc: Backout relocation changes.
30 Ugh. I *hate* to back this change out, but these compiler flags don't
31 work for relocation on all versions of GCC. I've not been able to
32 reproduce the environment in my setup (and hence, not been able to
33 find a combination that *does* work), so I've got no choice but to go
34 back to the old gcc flags and linker script.
38 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
40 Date: Tue Nov 13 09:11:05 2007 +0100
42 Fixed mips_io_port_base build errors.
44 This patch has been sent on:
47 Although mips_io_port_base is currently a part of IDE command, it is quite
48 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
49 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
51 This patch is triggered by multiple definition of `mips_io_port_base' build
52 error on gth2 (and tb0229 also needs this fix.)
54 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
55 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
56 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
57 make: *** [u-boot] Error 1
62 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
64 Date: Sat Nov 17 01:30:40 2007 +0100
66 Fix a bug in the slave serial programming mode for the Xilinx
67 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
68 the most significant bit was set, which did not work on any
69 architecture where "char" defaulted to be an unsigned type.
75 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
77 Date: Thu Nov 1 12:23:29 2007 -0500
79 86xx: Fix broken variable reference when #def DEBUGing.
81 Sometimes you can't reference the DDR2 controller variables.
85 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
87 Date: Fri Oct 26 18:32:00 2007 +0800
89 make 8610 board use pixis reset
93 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
95 Date: Mon Oct 29 19:26:21 2007 +0800
97 Unify pixis_reset altbank across board families
99 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
100 into the separate board config files.
105 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
107 Date: Wed Nov 7 08:19:21 2007 +0100
109 Fix warning: pointer targets in assignment differ in signedness
113 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
115 Date: Wed Nov 7 08:19:19 2007 +0100
117 Fix warning differ in signedness in common/cmd_ide.c
121 commit 955413f35f054a82e40042f1dbcf501c6a05719b
123 Date: Thu Nov 15 08:27:52 2007 -0700
125 Revert "Correct relocation fixup for mpc5xx"
127 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
130 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
132 Date: Thu Nov 15 08:24:32 2007 -0700
134 Revert "Correct fixup relocation for MPC5xxx"
136 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
139 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
141 Date: Thu Nov 15 08:21:04 2007 -0700
143 Revert "Correct fixup relocation for mpc8220"
145 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
148 commit 70922342369e5e39b286fe21e768a239ca07a514
150 Date: Thu Nov 15 08:20:57 2007 -0700
152 Revert "Correct fixup relocation for mpc824x"
154 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
157 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
159 Date: Thu Nov 15 08:20:50 2007 -0700
161 Revert "Correct fixup relocation for mpc8260"
163 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
166 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
168 Date: Thu Nov 15 08:20:43 2007 -0700
170 Revert "Correct fixup relocation for mpc83xx"
172 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
175 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
177 Date: Thu Nov 15 08:20:25 2007 -0700
179 Revert "[MPC512x] Correct fixup relocation"
181 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
184 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
186 Date: Tue Nov 13 08:18:20 2007 +0100
188 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
192 commit 1ce55151c85d068f70317a8d65c61058b891afb4
194 Date: Tue Nov 13 07:50:29 2007 +0100
196 [UC101] SRAM now with 2 MB working.
200 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
202 Date: Thu Nov 8 12:50:18 2007 -0600
204 ColdFire: MCF5329 - Remove reset registers from CCM
208 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
210 Date: Thu Nov 8 12:31:11 2007 -0600
212 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
216 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
218 Date: Thu Nov 8 12:19:01 2007 -0600
220 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
224 commit 225a24b5e062ad94627424508ae814f51dbe1a34
226 Date: Wed Nov 7 18:00:54 2007 -0600
228 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
232 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
234 Date: Wed Nov 7 17:56:15 2007 -0600
236 ColdFire: MCF532x - Update do_reset() using core reset
240 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
242 Date: Wed Nov 7 17:51:00 2007 -0600
244 ColdFire: Update cpu flag for 4.2-xx compiler
248 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
250 Date: Mon Nov 5 17:39:24 2007 +0800
252 Implement general ULi 526x Ethernet driver support in U-boot
254 This patch implements general ULi 526x Ethernet driver.
255 Until now, it is the only native Ethernet port on
256 MPC8610HPCD board, but it could be used on other boards
257 with ULi 526x Ethernet port as well.
264 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
266 Date: Thu Nov 1 08:46:50 2007 -0500
268 NET: Add Ethernet 1000BASE-X support for PPC4xx
270 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
271 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
272 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
273 "mii info" command is modified to distinguish between 1000BASE-T and -X.
278 commit 298035df4948b113d29ac0e694717d34b95bc5dc
280 Date: Wed Oct 31 11:21:29 2007 -0500
282 NET: Cosmetic changes
287 commit 992742a5b09d9040adbd156fb90756af66ade310
289 Date: Sat Nov 3 23:09:27 2007 +0100
291 Cleanup coding style; update CHANGELOG
295 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
297 Date: Fri Nov 2 13:15:42 2007 -0700
299 fix wording in README
301 Changed the wording to properly describe the shadowing
302 of the environment from ROM to RAM
306 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
308 Date: Wed Oct 31 02:18:15 2007 +0900
310 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
314 commit ec22755799466c8a103664bb3a5e647bf9c238f4
316 Date: Thu Oct 25 16:08:14 2007 +0300
318 Trimmed some variables in ne2000.c
322 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
324 Date: Thu Oct 25 17:51:27 2007 +0800
326 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
328 The scan code of the key 'z' is 0x1d, which should be handled.
330 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
335 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
337 Date: Thu Oct 25 17:30:04 2007 +0800
339 Fix USB support issue for MPC8641HPCN board.
341 The configuration file has already enabled USB, but it
342 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
343 on MPC8641HPCN can not work because of the wrong USB
346 And add the USB command to U-Boot commands list.
350 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
352 Date: Wed Oct 24 18:16:01 2007 +0200
354 Use config_cmd_default.h instead of config_cmd_all.h
358 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
360 Date: Wed Oct 24 01:37:36 2007 +0200
362 TQM5200: Call usb_cpu_init() during board init
364 usb_cpu_init() configures GPS USB pins, clocks, etc. and
365 is required for proper operation of kernel USB subsystem.
366 This setup was previously done in the kernel by the fixup
367 code which is being removed, thus low level init must be
372 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
374 Date: Tue Oct 23 16:25:50 2007 +0200
378 An obvious typo. Originally fixed in linkstation u-boot port.
382 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
384 Date: Tue Oct 23 14:35:05 2007 +0200
386 Fix a typo in cpu/mpc824x/interrupts.c
388 Since December 2003 the timer_interrupt_cpu() function in
389 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
390 parameter. Remove it.
394 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
396 Date: Wed Oct 17 11:13:51 2007 +0200
398 add ft_cpu_setup(..) on mpc8260
400 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
401 based on code from mpc5xxx
406 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
408 Date: Wed Oct 17 11:18:42 2007 +0200
410 changes for IDS8247 board support
412 To get the IDS8247 board working following are done:
413 - FCC2 is deactivated
416 - CFI driver is activated
417 - Adapted for use with LIBFDT
422 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
424 Date: Wed Oct 24 15:48:37 2007 +0200
426 ATSTK1002: Remove default ethernet addresses
428 Wolfgang is right: It's not a good idea to set up default initial
429 ethernet addresses for a board, even though they belong to the local
432 This will change the failure mode from "IT manager screams at you for
433 using duplicate ethernet addresses" to a nice error message explaining
434 that the ethernet address hasn't been set properly.
438 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
440 Date: Mon Oct 29 17:40:35 2007 -0400
444 This is a multi-part message in MIME format.
446 commit e6e505eae94ed721e123e177489291fc4544b7b8
448 Date: Mon Oct 29 17:19:03 2007 -0400
450 Found a bug in the way the DHCP Request packet is built, where the IP address
451 that is offered by the server is bound to prematurely. This patch is a fix of
452 that bug where the IP address offered by the DHCP server is not used until
453 after the DHCP ACK from the server is received.
458 commit 31548249decf18a6b877a18436b6139dd483fe4a
460 Date: Mon Oct 29 17:40:35 2007 -0400
464 This is a multi-part message in MIME format.
466 commit e6e505eae94ed721e123e177489291fc4544b7b8
468 Date: Mon Oct 29 17:19:03 2007 -0400
470 Found a bug in the way the DHCP Request packet is built, where the IP address
471 that is offered by the server is bound to prematurely. This patch is a fix of
472 that bug where the IP address offered by the DHCP server is not used until
473 after the DHCP ACK from the server is received.
478 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
480 Date: Thu Oct 25 17:16:22 2007 -0500
482 ColdFire 54455: Fix correct boot location for atmel and intel
486 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
488 Date: Thu Oct 25 17:14:00 2007 -0500
490 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
494 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
496 Date: Thu Oct 25 17:12:36 2007 -0500
498 ColdFire 5329: Assign correct SDRAM size and fix cache
502 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
504 Date: Thu Oct 25 17:10:23 2007 -0500
506 ColdFire 5253: Assign correct SDRAM size
510 commit 2acefa72ee0026f862ab65597ca687428f63a973
512 Date: Thu Oct 25 17:09:17 2007 -0500
514 ColdFire 5282: Fix external flash boot and return dramsize
518 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
520 Date: Thu Oct 25 17:20:01 2007 +0200
522 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
526 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
528 Date: Wed Oct 24 08:42:25 2007 +0200
530 TQM5200: fix spurious characters on second serial interface
532 With this patch PSC3 is configured as UART. This is done, because if
533 the pins of PSC3 are not configured at all (-> all pins are GPI),
534 due to crosstalk, spurious characters may be send over the RX232_2_TXD
540 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
542 Date: Wed Oct 24 08:41:27 2007 +0200
544 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
546 Some commands for the STK52xx base board try to access the SM501 grafic
547 controller. But the TQM5200S has no grafic controller (only the TQM5200
548 and the TQM5200B have). This patch deactivates the commands accessing
549 the SM501 for the TQM5200S.
554 commit b31f64343ead9482cd439b1adbe4c34026a641b1
556 Date: Mon Oct 22 16:45:53 2007 +0200
558 TQM5200: fix spurious characters on second serial interface
560 With this patch PSC3 is configured as UART. This is done, because if
561 the pins of PSC3 are not configured at all (-> all pins are GPI),
562 due to crosstalk, spurious characters may be send over the RX232_2_TXD
567 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
569 Date: Mon Oct 22 16:40:06 2007 +0200
571 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
573 Some commands for the STK52xx base board try to access the SM501 grafic
574 controller. But the TQM5200S has no grafic controller (only the TQM5200
575 and the TQM5200B have). This patch deactivates the commands accessing
576 the SM501 for the TQM5200S.
580 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
582 Date: Sun Oct 21 09:14:28 2007 +0200
584 Mips: Fix string functions differ prototype declaration
588 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
590 Date: Fri Oct 19 17:51:40 2007 -0500
592 fsl_pci_init enable COMMAND_MEMORY if inbound window
594 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
595 to pciauto_setup_device has the side effect of not getting
600 commit e9d0d527992566ebef9826962ff1745b2f082b92
602 Date: Fri Oct 19 10:55:24 2007 +0200
604 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
608 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
610 Date: Fri Oct 19 08:10:15 2007 +0200
612 fix warning: no return statement in function returning non-void
616 commit e78220f6e514206757acfe247297fc9a328a881f
618 Date: Fri Oct 19 06:33:45 2007 +0200
620 xsengine: Fix no partition type specified, use DOS as default
624 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
626 Date: Fri Oct 19 00:24:59 2007 +0200
628 lubbock: Fix no partition type specified, use DOS as default
632 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
634 Date: Tue Oct 23 16:50:03 2007 +0200
636 Coding style: keep lists sorted; update CHANGELOG
640 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
642 Date: Fri Oct 19 00:09:05 2007 +0200
644 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
648 commit 96455bfebc9887837095c9051d216f53c61b5f10
650 Date: Fri Oct 19 00:07:39 2007 +0200
652 Fix warning differ in signedness in board/innokom/innokom.c
656 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
658 Date: Fri Oct 19 00:25:33 2007 +0200
662 The pxa255_idp being an old unmaintained board showed several issues:
663 1. CONFIG_INIT_CRITICAL was still defined.
664 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
665 3. Symbol flash_addr was undeclared.
666 4. The boards lowlevel_init function was still called memsetup.
667 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
668 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
669 'target CPU does not support interworking' warnings on recent compilers.
670 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
671 indexes rather than the register definitions from the pxa-regs header
672 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
673 avoid any ambiguities.
674 8. There were several redefinition warnings concerning ICMR, OSMR3,
675 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
676 9. The board configuration file was rather outdated.
677 10. The part header file defined the vendor, product and revision arrays
678 as unsigned chars instead of just chars in the block_dev_desc_t
683 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
685 Date: Wed Oct 17 11:56:31 2007 -0500
687 Make MPC8266ADS command selection more robust
689 Fix MPC8266 command line definition so it won't break when new commands
693 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
695 Date: Tue Oct 23 13:14:10 2007 +0200
697 Motion-PRO: Update configuration to accomodate next generation board.
699 New board has faster oscillator and a different Flash chip. This affects:
702 - Flash CS configuration (timings)
703 - Flash sector size, and thus MTD partition layout
704 - malloc() arena size (due to bigger Flash sectors)
705 - smaller memory test range (due to bigger malloc() arena)
707 This patch also enables more extensive memory testing via "mtest".
711 commit eff501904df2bf1724a750062628ba2c51dbb1f8
713 Date: Tue Oct 23 11:36:07 2007 +0200
715 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
717 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
718 register must be written a value of 0x00000004 as the first step of the
719 SDRAM contorller configuration.
723 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
725 Date: Tue Oct 23 10:22:16 2007 +0100
727 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
729 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
731 Date: Tue Oct 23 10:17:42 2007 +0200
733 ppc4xx: lwmon5: Some further GPIO config changes
737 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
739 Date: Sun Oct 21 22:10:10 2007 +0900
741 [MIPS] Fix UNCACHED_SDRAM
743 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
748 commit 00101dd7a32d12f698150123e47e4b3420279f86
750 Date: Sun Oct 21 21:30:42 2007 +0900
752 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
756 commit eb700636db017d310edaeb559b13d82588560674
758 Date: Sun Oct 21 10:55:37 2007 +0900
760 [MIPS] u-boot.lds: Define _gp in a standard manner
764 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
766 Date: Sun Oct 21 10:55:36 2007 +0900
770 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
771 As a general principle, we should use _gp for $gp.
773 Thanks to linker script's help we fortunately have _gp which equals to
774 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
775 be able to access to GOT entires, global variables and procedure entry
776 points. The right thing to do is to use _gp.
778 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
779 which holds the offset from _gp. When updating GOT entries, we use this
780 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
783 I made some change to leave over num_got_entries.
788 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
790 Date: Sun Oct 21 10:55:36 2007 +0900
792 [MIPS] u-boot.lds: Fix __got_start and __got_end
794 Ensure that __got_start points to top of the `.got', and __got_end points
795 to bottom as well, so that we never fail to count num_got_entries.
799 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
801 Date: Sun Oct 21 10:55:36 2007 +0900
803 [MIPS] u-boot.lds: Remove duplicated .sdata section
807 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
809 Date: Sun Oct 21 01:01:17 2007 +0200
811 Minor coding style cleanup; update CHANGELOG
815 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
817 Date: Thu Oct 4 20:47:10 2007 +0300
821 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
822 to do anything in eth_stop() if eth_init() was not called.
823 Simplified RX path in order to avoid timeouts on really really
824 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
825 clever enough to cope with 1 packet per eth_rx().
829 commit df90968b48fb34fa9072fab150db2ac89678f537
831 Date: Mon Sep 24 13:32:13 2007 -0400
833 Setting MSR[DE] in do_reset
836 This patch ensures the soft reset of the board for the 85xx boards
837 by setting the MSR[DE] in the do_reset function.
841 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
843 Date: Mon Sep 24 13:36:01 2007 -0400
848 This patch fixes the MSR overwrite in the start.S when moving out of
853 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
855 Date: Fri Oct 19 11:33:48 2007 -0500
857 tsec driver should clear RHALT on startup
859 This was causing problems for some people.
865 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
867 Date: Thu Oct 11 00:29:18 2007 -0500
869 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
871 On the MPC85xx CDS we have two issues:
873 1. The device tree fixup code did not check to see if the property we are
874 trying to update is actually found. Its possible that it would update
875 random memory starting at 0.
877 2. Newer Linux kernel's have moved the location of the PCI nodes to be
878 sibilings of the soc node and not children. The explicit PATH to the PCI
879 node would not be found for these device trees. Add the ability to handle
880 both paths. In the future we shouldn't handle such fixups by explicit path.
884 commit a3063eec775719b7e91023bbec3f64b3118791df
886 Date: Thu Oct 11 00:18:48 2007 -0500
888 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
890 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
891 console. Make it so we match that config what we tell Linux as the early
896 commit e1ce3cb617bb06f91f82f98915391175addf3e82
898 Date: Tue Oct 2 11:12:27 2007 -0500
900 Remove magic numbers from cache related operations for mpc85xx
902 The mpc85xx start code uses some magic numbers that we actually
903 have #defines for in <config.h> so use those instead.
907 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
909 Date: Fri Oct 19 16:47:26 2007 +0200
915 commit 281df457c1aa50d2752165d0c5c3282d4027b974
917 Date: Thu Oct 18 17:47:19 2007 +0800
919 mpc83xx: Add configure entry for MPC83xx ATM support
921 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
927 commit d2646554f529a9577515eceb0ec5eceee18244ba
929 Date: Thu Oct 18 17:44:38 2007 +0800
931 mpc83xx: pq-mds-pib.c typo error
933 Correct to val8 from val.
938 commit 3e11ae80fec1ee12194940955431186abf6009c2
940 Date: Wed Oct 17 15:40:19 2007 +0200
942 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
946 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
948 Date: Tue Oct 16 14:50:40 2007 -0500
950 Make MPC8266ADS board compile again.
954 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
956 Date: Mon Aug 27 12:41:03 2007 -0500
958 86xx: Allow for fewer DDR slots per memory controller.
960 As a direct correlation exists between DDR DIMM slots
961 and SPD EEPROM addresses used to configure them, use
962 the individually defined SPD_EEPROM_ADDRESS* values to
963 determine if a DDR DIMM slot should have its SPD
964 configuration read or not.
966 Effectively, this now allows for 1 or 2 DIMM slots
967 per memory controller.
971 commit 4d4a945e189a2f384c66432316da2788a0ac1607
973 Date: Mon Oct 15 11:59:17 2007 +0200
975 PXA USB OHCI: "usb stop" implementation.
977 Some USB keys need to be switched off before loading the kernel
978 otherwise they can remain in an undefined status which prevents them
979 to be correctly recognized by the kernel.
983 commit e2e93442e558cf1500e92861f99713b2f045ea22
985 Date: Mon Oct 15 11:39:00 2007 +0200
987 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
989 The I2C bootstrap values that can be setup via the "bootstrap" command,
990 were setup incorrect regarding the generation of the internal sync PCI
991 clock. The values for PLB clock == 133MHz were slighly incorrect and the
992 values for PLB clock == 166MHz were totally incorrect. This could
993 lead to a hangup upon booting while PCI configuration scan.
995 This patch fixes this issue and configures valid PCI divisor values
996 for the sync PCI clock, with respect to the provided external async
999 Here the values of the formula in the chapter 14.2 "PCI clocking"
1000 from the 440EPx users manual:
1002 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
1004 33MHz async PCI frequency:
1006 => 32 <= 44.3 <= 65 (div = 3)
1009 => 32 <= 55.3 <= 65 (div = 3)
1011 66MHz async PCI frequency:
1013 => 65 <= 66.5 <= 132 (div = 2)
1016 => 65 <= 83 <= 132 (div = 2)
1020 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
1022 Date: Mon Oct 15 11:29:33 2007 +0200
1024 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
1026 The BCSR status bit for the 66MHz PCI operation was correctly
1027 addressed (MSB/LSB problem). Now the correct currently setup
1028 PCI frequency is displayed upon bootup.
1030 This patch also fixes this problem on Rainier & Yellowstone, since these
1031 boards use the same souce code as Sequoia & Yosemite do.
1035 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
1037 Date: Wed Sep 26 17:55:56 2007 +0200
1039 TQM860M: adjust for doubled flash sector size.
1041 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
1042 doubled sector size.
1046 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
1048 Date: Wed Sep 26 17:55:54 2007 +0200
1050 TQM8xx: Fix CAN timing.
1054 commit d43e489baf02afae49077791fb22332d240d8656
1056 Date: Thu Sep 27 14:54:36 2007 +0200
1058 TQM866M: fix SDRAM refresh
1060 At 133 MHz the current SDRAM refresh rate is too fast
1061 (measured 4 * 1.17 us).
1062 CFG_MAMR_PTA changes from 39 to 97. This result
1063 in a refresh rate of 4 * 7.8 us at the default clock
1064 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
1065 This is a compromise until a new method is found to
1066 adjust the refresh rate.
1070 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
1072 Date: Wed Sep 26 17:55:55 2007 +0200
1074 TQM866M: adjust for doubled flash sector size.
1076 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
1077 doubled sector size.
1081 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
1083 Date: Sun Oct 14 16:12:29 2007 +0200
1085 [FIX] XUPV2P change command handling
1086 and remove code violation
1088 commit 636400198228d96983c06657b17f760f5989958e
1090 Date: Sun Oct 14 00:13:19 2007 +0200
1092 Prepare for 1.3.0-rc3 release
1096 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
1098 Date: Sat Sep 29 13:41:37 2007 +0200
1100 Fix warning differ in signedness in cpu/pxa/mmc.c
1104 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
1106 Date: Sat Oct 13 23:51:14 2007 +0200
1108 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
1113 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
1115 Date: Sat Oct 13 21:15:39 2007 +0200
1117 Coding Style cleanup.
1121 commit e1893815b0999410d7a327589611c7b38e95299e
1123 Date: Fri Oct 12 15:49:39 2007 +0200
1129 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
1131 Date: Tue Oct 9 13:58:24 2007 +0200
1133 [ads5121] EEPROM support added.
1137 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
1139 Date: Sat Oct 6 18:55:35 2007 +0200
1141 AVR32: Initialize bi_flash* in board_init_r
1143 The ATSTK1000-specific flash driver intializes bi_flashstart,
1144 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
1147 Initialize these in board_init_r instead so that things will still be
1148 set up correctly when we switch to the CFI driver.
1152 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
1154 Date: Fri Oct 5 10:40:54 2007 +0200
1156 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
1160 commit 92869195ef8210758d2176230c0a36897afd50ed
1162 Date: Fri Oct 5 09:46:06 2007 +0200
1164 CM5200: Fix missing null-termination in hostname manipulation code
1168 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
1170 Date: Tue Oct 2 19:09:01 2007 +0200
1172 Fix memtest breakage
1174 CFG_MEMTEST_START uses weird magic involving gd, which fails to
1175 compile. Use hardcoded values instead (we actually know how much RAM
1180 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
1182 Date: Tue Oct 2 11:44:46 2007 +0200
1184 ppc4xx: Coding style cleanup
1188 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
1190 Date: Tue Oct 2 11:44:19 2007 +0200
1192 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
1196 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
1198 Date: Mon Oct 1 09:51:50 2007 +0200
1200 Program EPLD to force full duplex mode for PHY.
1202 EPLD forces modes of PHY operation. By default full duplex is turned off.
1203 This fix turns it on.
1207 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
1209 Date: Mon Sep 24 14:50:32 2007 +0300
1211 Bugfix: Use only one PTD for one endpoint
1213 Original isp116x-hcd code prepared multiple PTDs for longer than 16
1214 byte transfers for one endpoint. That is unnecessary because the
1215 ISP116x is able to split long data from one PTD into multiple
1216 transactions based on the buffer size of the endpoint. It also caused
1217 serious problems if the endpoint NAKed some of the transactions. In
1218 that case ISP116x wouldn't notice that the other PTDs were for the same
1219 endpoint and would try the other PTDs possibly out of order. That would
1220 break the whole transfer.
1222 This patch makes isp116x_submit_job to use one PTD for one transfer.
1227 commit 86ec86c04326c3913178a7679aa910de071da75d
1229 Date: Thu Sep 27 23:27:47 2007 +0200
1231 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
1235 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
1237 Date: Tue Sep 11 14:12:55 2007 +0200
1239 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
1243 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
1245 Date: Wed Sep 26 16:35:54 2007 -0500
1247 85xx io out functions need sync after write.
1249 This fixes the mc146818 rtc_read/write functions for 85xx.
1253 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
1255 Date: Tue Sep 25 15:48:05 2007 -0600
1257 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
1259 CFG_FPGA_XILINX is a bit value used to test against the value in
1260 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
1261 think that is the intention in this code.
1265 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
1267 Date: Mon Sep 24 00:41:30 2007 +0200
1269 [FIX] change command handling and removing code violation
1271 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
1273 Date: Mon Sep 24 00:36:06 2007 +0200
1275 [FIX] change sets of commands
1276 because changing of command handling brings
1277 compilation problems
1279 commit cb1bc63b75a232571eb69aa2c8aa919321655845
1281 Date: Mon Sep 24 00:30:42 2007 +0200
1283 [FIX] Email reparation & Copyright
1284 Both codes are written by myself without any
1287 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
1289 Date: Mon Sep 24 00:25:11 2007 +0200
1291 [PATCH] Change macro name for UartLite
1292 because PowerPC 405 can use UartLite as console
1294 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
1296 Date: Mon Sep 24 00:21:19 2007 +0200
1298 [PATCH] Add support for design without interrupt controller
1301 commit 0731933ec8ec45d02ba89b52df673d526873cdde
1303 Date: Mon Sep 24 00:19:48 2007 +0200
1305 [FIX] resolve problem with cpu without barrel shifter
1307 commit db14d77995ce515b728b178b63f82babe60e3d56
1309 Date: Mon Sep 24 00:18:46 2007 +0200
1311 [FIX] repair email address
1313 commit 481d4328618804add1f818a6c96296121cd0528e
1315 Date: Mon Sep 24 00:17:42 2007 +0200
1317 [FIX] repair MFSL commands
1319 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
1321 Date: Mon Sep 24 00:08:37 2007 +0200
1323 synchronizition with mainline
1325 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
1327 Date: Thu Sep 20 00:04:14 2007 +0200
1333 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
1335 Date: Tue Sep 18 21:36:35 2007 +0200
1337 Avoid compiler warning.
1341 commit 8a783a65851bc7421ab69f442261215e21b8891a
1343 Date: Tue Sep 18 12:24:57 2007 -0600
1345 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
1347 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
1348 nulls in a string differently. For example, the following statement:
1349 echo "this is a string\0" > afile
1350 Will produce the following with /bin/bash:
1351 "this is a string\0"
1352 But with /bin/dash, will produce:
1355 Bug fixed by moving the embedded null out of the makefile and into the
1356 config header. Also renamed the macro to avoid usage colision with the same
1357 macro used by other board ports.
1361 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
1363 Date: Tue Sep 18 17:40:27 2007 +0200
1365 MCC200: fix build warning
1367 The MCC200 board config file includes version.h for some customer-
1368 specific setting, which causes warnings with "make depend"; build
1369 version.h before depend.
1373 commit bd86220f58b99d6896198c385fda132f0c980915
1375 Date: Tue Sep 18 13:07:54 2007 +0100
1377 Move coloured led API to status_led.h
1378 Improve indentation in drivers/at45.c
1380 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
1382 Date: Tue Sep 18 08:47:20 2007 +0200
1384 Update atstk1002 bootargs.
1386 Updates to atstk1002 U-Boot header file:
1388 * Set the bootargs for at1002 to point to the SD-card partition instead
1389 * ... of the boot flash.
1390 * Removing the rootfstype since that argument are not needed.
1395 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
1397 Date: Wed Sep 12 13:32:37 2007 +0200
1399 Add some comments to clocks in atstk1002.h
1401 This patch applies some clarifying comments to how the different
1402 clocks are setup according to atstk1002.h Some of the previous
1403 comments where stating wrongful information.
1407 commit 97213f32416ead885deafea86774e912ffd60ad0
1409 Date: Mon Sep 17 17:04:47 2007 +0200
1411 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
1415 commit 30363e98fa470fbecea5e8bc0f1443352754f303
1417 Date: Mon Sep 17 08:20:47 2007 +0200
1419 Small whitespace cleanup of OneNAND patch
1423 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
1425 Date: Mon Sep 10 17:15:14 2007 +0900
1427 OneNAND support (take #2)
1429 [PATCH 3/3] OneNAND support (take #2)
1431 OneNAND support at U-Boot
1435 commit 17aa2800457df0c06b41516f46f126712c196219
1437 Date: Mon Sep 10 17:14:34 2007 +0900
1439 OneNAND support (take #2)
1441 [PATCH 2/3] OneNAND support (take #2)
1443 OneNAND support at U-Boot
1447 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
1449 Date: Mon Sep 10 17:13:49 2007 +0900
1451 OneNAND support (take #2)
1453 [PATCH 1/3] OneNAND support (take #2)
1455 OneNAND support at U-Boot
1459 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
1461 Date: Sun Sep 16 20:51:57 2007 +0200
1463 [FIX] remove files form repository
1465 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
1467 Date: Sun Sep 16 17:10:04 2007 +0200
1469 TQM8xx[LM]: Fix broken environment alignment.
1471 With recent toolchains, the environment sectors were no longer aligned to
1472 sector boundaries. The reason was a combination of two bugs:
1474 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
1475 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
1476 this gets defined, is not included here (and cannot be included
1477 without causing lots of problems).
1479 Added a new #define CFG_USE_PPCENV for all boards which really
1480 want to put the environment is a ".ppcenv" section.
1482 2) The linker scripts just include environment.o, silently assuming
1483 that the objects in that file are really in the order in which
1484 they are coded in the C file, i. e. "environment" first, then
1485 "redundand_environment", and "env_size" last. However, current
1486 toolchains (GCC-4.x) reorder the objects, causing the environment
1487 data not to start on a flash sector boundary:
1491 40008000 T environment 40008000 T env_size
1492 4000c000 T redundand_environment 40008004 T redundand_environment
1493 40010000 T env_size 4000c004 T environment
1495 Note: this patch fixes just the first part, and cures the alignment
1496 problem by making sure that "env_size" gets placed correctly. However,
1497 we still have a potential issue because primary and redundant
1498 environment sectors are actually swapped, i. e. we have now:
1500 40008000 T redundand_environment
1501 4000c000 T environment
1504 This shall be fixed in the next version.
1508 commit eb6da8050797c204c9d010548424186c7ce32fc1
1510 Date: Sun Sep 16 02:39:35 2007 +0200
1512 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
1516 commit cd2d1602c54cc6957bdef3872272a4b264893960
1518 Date: Mon Sep 10 14:54:56 2007 -0400
1522 Fixup for the break statement in wrong place.
1528 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
1530 Date: Tue Sep 11 17:04:00 2007 +0200
1532 Fix do_div() usage in nand process output
1534 Fix usage of do_div() in nand erase|read|write process output.
1536 The last patch to nand_util.c introduced do_div() instead of libgcc's
1537 implementation. But do_div() returns the quotient in its first
1538 macro parameter and not as result.
1542 commit c750d2e6692a000a82f29de7bf24e3dc21239161
1544 Date: Wed Sep 12 12:36:53 2007 +0200
1546 NAND: Add CFG_NAND_QUIET option
1548 This config option sets the default for the progress information
1549 output behavior that can also be configured through the 'quiet'
1550 environment variable.
1552 The legacy NAND code does not print the current progress info
1553 on the console. So this option is for backward compatibility for
1554 units that are in the field and where setting the quiet variable
1555 is not an option. With CFG_NAND_QUIET set to '1' the console
1556 progress info is turned off. This can still be overwritten
1557 through the environment variable.
1561 commit dcb88630290d2bcd803386dd4c2be73142994c4f
1563 Date: Thu Sep 13 16:06:05 2007 -0700
1565 ColdFire: fix build error becasue of bad type of mii_init()
1569 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
1571 Date: Thu Sep 13 16:04:05 2007 -0700
1573 ColdFire: Fix build error caused by pixis.c
1575 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
1579 commit e21659e30660a1377c42af135a6114efe39801d9
1581 Date: Fri Sep 14 11:14:42 2007 -0600
1583 Update MPC8349ITX*_config to place config.tmp in right place.
1585 MPC834ITX*_config does not store config.tmp at the correct locatation,
1586 causing MPC8349ITXGP to have the wrong TEXT_BASE.
1591 commit 1218abf1b5817a39a82399b4b928b00750575bda
1593 Date: Sat Sep 15 20:48:41 2007 +0200
1595 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
1599 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
1601 Date: Sat Sep 15 11:55:42 2007 +0200
1603 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
1605 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
1610 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
1612 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
1614 Date: Sat Sep 15 00:03:35 2007 +0200
1616 Synchronize with U-BOOT mainline
1618 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
1620 Date: Fri Sep 14 11:14:42 2007 -0600
1622 Update MPC8349ITX*_config to place config.tmp in right place.
1624 MPC834ITX*_config does not store config.tmp at the correct locatation,
1625 causing MPC8349ITXGP to have the wrong TEXT_BASE.
1631 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
1633 Date: Thu Sep 13 18:21:48 2007 +0200
1635 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
1639 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
1641 Date: Thu Sep 13 16:33:59 2007 +0200
1643 tqm5200: Restore customary env. variable boot commands for powerpc kernels
1645 - update default definitions of kernel_addr and fdt_addr env. variables
1646 - make arch/powerpc booting the default scenario
1647 - update MTD partition layout to match the above
1651 commit f34024d4a328e6edd906456da98d2c537155c4f7
1653 Date: Wed Sep 12 00:48:57 2007 +0200
1655 Fix memory corruption problem on STX GP3 SSA Board.
1659 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
1661 Date: Tue Sep 11 15:35:01 2007 +0100
1665 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
1667 Date: Tue Sep 11 15:42:11 2007 +0200
1669 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
1670 scan on second pci bus.
1674 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
1676 Date: Tue Sep 11 12:57:52 2007 +0200
1678 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
1680 Bamboo has a file sdram.c which needs special treatment when building in
1681 separate directory. It has to be linked to build directory otherwise it is
1686 commit d45963854eff39d575124d859419bb4953ce2c87
1688 Date: Tue Sep 11 00:37:04 2007 +0200
1690 [FIX] Microblaze ML401 - repare FLASH handling
1692 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
1694 Date: Mon Sep 10 16:55:59 2007 +0100
1696 Allocate CPU Architecture Code for STMicroelectronics' ST200.
1699 ---------------------------------------------------
1701 commit 754bac48156f8958d8f6a53a51eda88ab5758929
1703 Date: Mon Sep 10 20:42:31 2007 +0200
1705 Update version to match current state.
1709 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
1711 Date: Mon Sep 10 17:39:08 2007 +0200
1713 [MPC512x] Streamline frame handling in the FEC driver
1715 - convert frame size settings to be derived from a single base
1716 - set frame size to the recommended default value
1720 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
1722 Date: Mon Sep 10 11:34:00 2007 +0900
1724 Remove compiler warning: target CPU does not support interworking
1728 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
1730 Date: Sun Sep 9 21:21:33 2007 +0200
1732 Fix compile error in spc1920 config.
1737 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
1739 Date: Fri Sep 7 09:25:07 2007 -0600
1741 Bugfix: make bootm+libfdt compile on boards with no flash
1745 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
1747 Date: Fri Sep 7 18:35:37 2007 +0200
1749 [PPC440SPe] PCIe environment settings for Katmai and Yucca
1751 - 'pciconfighost' is set by default in order to be able to scan bridges
1752 behind the primary host/PCIe
1754 - 'pciscandelay' env variable is recognized to allow for user-controlled
1755 delay before the PCIe bus enumeration; some peripheral devices require a
1756 significant delay before they can be scanned (e.g. LSI8408E); without the
1757 delay they are not detected
1761 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
1763 Date: Fri Sep 7 18:20:23 2007 +0200
1765 [PPC440SPe] Improve PCIe configuration space access
1767 - correct configuration space mapping
1768 - correct bus numbering
1769 - better access to config space
1771 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
1772 first device on the first bus. We now allow to configure up to 16 buses;
1773 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
1774 peripheral devices farther in hierarchy can be identified.
1778 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
1780 Date: Fri Sep 7 17:46:18 2007 +0200
1782 [PPC440SPe] Convert machine check exceptions handling
1784 Convert using fixup mechanism to suppressing MCK for the duration of config
1785 read/write transaction: while fixups work fine with the case of a precise
1786 exception, we identified a major drawback with this approach when there's
1787 an imprecise case. In this scenario there is the following race condition:
1788 the fixup is (by design) set to catch the instruction following the one
1789 actually causing the exception; if an interrupt (e.g. decrementer) happens
1790 between those two instructions, the ISR code is executed before the fixup
1791 handler the machine check is no longer protected by the fixup handler as it
1792 appears as within the ISR code. In consequence the fixup approach is being
1793 phased out and replaced with explicit suppressing of MCK during a PCIe
1794 config read/write cycle.
1798 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
1800 Date: Fri Sep 7 17:43:36 2007 +0200
1802 Fix typo in MAKEALL script.
1806 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
1808 Date: Fri Sep 7 17:09:21 2007 +0200
1810 [MPC512x] Proper handling of larger frames in the FEC driver
1812 When frame larger than local RX buffer is received, it is split and handled
1813 by two buffer descriptors. Prior to this patch the FEC driver discarded
1814 contents of a buffer descriptor without the 'LAST' bit set, so the first
1815 part of the frame was lost in case of larger frames. This fix allows to
1816 safely combine the two pieces into the whole frame.
1820 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
1822 Date: Fri Sep 7 17:05:36 2007 +0200
1824 [MPC512x] Correct fixup relocation
1828 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
1830 Date: Fri Sep 7 01:21:25 2007 +0200
1832 Update CHANGELOG, minor coding style cleanup.
1834 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
1836 Date: Thu Aug 30 23:01:49 2007 +0200
1838 PXA270: Added support for TrizepsIV board.
1840 This patch add support for the Trizeps IV module (520Mhz).
1844 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
1846 Date: Thu Aug 30 22:57:04 2007 +0200
1848 PXA270: Add support for multiple serial ports.
1850 This patch adds support for multiple serial ports to the PXA target.
1851 FFUART, BTUART and STUART are supported.
1855 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
1857 Date: Thu Aug 30 22:48:47 2007 +0200
1859 PXA270: fix compile issue (invalid lvalue)
1861 Code is broken for PXA270 due to "invalid lvalue in assignment".
1863 This patch fix it in pxa-regs.h
1867 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
1869 Date: Thu Aug 30 18:19:05 2007 +0800
1871 Add BUILD_DIR support for bios emulator.
1875 commit b4d8a55145442f136982634862341a3e02002bda
1877 Date: Fri Aug 31 14:41:51 2007 +0900
1879 [MIPS] Remove inline asm string functions
1881 Stop using inline string functions on MIPS as other ARCHs do so,
1882 since the optimized inline asm versions are not small.
1884 This change is triggered by a following MIPS build error:
1885 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
1886 common/exports.c:32: undefined reference to `strcmp'
1887 make: *** [u-boot] Error 1
1891 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
1893 Date: Fri Aug 31 14:41:45 2007 +0900
1895 [MIPS] Update asm string header
1897 This patches contains several bugfixes and cleanups in the latest upstream:
1899 - Don't include linux/config.h
1900 - Remove buggy inline version of memscan.
1901 - Merge with Linux 2.6.11-rc3.
1902 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
1903 - Goodbye mips64. 31704 lines of code bite the dust.
1904 - Replace extern inline with static inline.
1905 - Fix return value of strncpy.
1906 - Remove a bunch more "$1" clobbers.
1910 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
1912 Date: Tue Sep 4 17:31:22 2007 +0200
1914 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
1916 Fix incorrect blob address calculation in do_bootm_linux() that prevents
1917 booting the kernel from a multi-file image (kernel + initrd + blob).
1919 Also, make minor updates to the U-Boot's output and to the coding style.
1923 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
1925 Date: Fri Aug 31 14:29:04 2007 +0200
1927 Add support for Sil680 IDE controller.
1929 o add drivers/sil680.c to support the Sil680 IDE-controller.
1930 o drivers/Makefile: add sil680.o.
1934 commit e79021223bc339df655e360645a52c457a74b067
1936 Date: Thu Sep 6 09:47:40 2007 -0600
1938 bootm/fdt: Only process the fdt if an fdt address was provided
1940 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
1941 kernels using the board info structure (instead of passing a device tree)
1942 This change allows the old style booting to be used if the fdt argument
1943 was not passed to 'bootm'.
1948 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
1950 Date: Thu Sep 6 09:46:23 2007 -0600
1952 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
1954 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
1956 Tested on: lite5200b
1958 Note: the fixup functions have not been moved to a common place. This
1959 patch is targeted for immediate merging as in solves a build issue, but
1960 the final name/location of the fixups is still subject to debate. I
1961 propose to merge this now, and move the fixups in the next merge window
1962 to be usable by all targets.
1966 commit 41bb76e941929f54a73206fb132f7a4c275543a3
1968 Date: Thu Sep 6 09:46:17 2007 -0600
1970 libfdt: add convenience function fdt_find_and_setprop()
1972 Given the path to a node, fdt_find_and_setprop() allows a property value
1977 commit 80767a6cead9990d9e77e62be947843c2c72f469
1979 Date: Wed Sep 5 16:04:41 2007 +0100
1981 Changed API name to coloured_led.h
1982 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
1983 Tidied other cpu/arm920t/start.S code
1985 commit 56a9270521baaa00e12639a978302a67f61ef060
1987 Date: Thu Aug 30 16:18:18 2007 -0500
1989 Fix ULI RTC support on MPC8544 DS
1991 The RTC on the M1575 ULI chipset requires a dummy read before
1992 we are able to talk to the RTC. We accomplish this by adding a
1993 second memory region to the PHB the ULI is on and read from it.
1995 The second region is added to maintain compatiabilty with Linux's
1996 view of the PCI memory map.
2000 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
2002 Date: Thu Aug 30 01:58:48 2007 -0500
2004 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
2006 pcie is now differentiated from pci. Add 8641 bus-range updates.
2010 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
2012 Date: Tue Sep 4 16:18:38 2007 +0100
2014 Add coloured led interface for ARM boards.
2015 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
2017 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
2019 Date: Tue Sep 4 14:49:28 2007 +0100
2021 Move include/led.h to board/at91rm9200dk
2023 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
2025 Date: Tue Sep 4 14:25:51 2007 +0100
2027 Ran Lindent on drivers/at45.c
2029 commit 557ab89d294f08dd532f21d19861b40093200a33
2031 Date: Tue Sep 4 14:23:50 2007 +0100
2033 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
2035 commit 81b73dec16fd1227369a191e725e10044a9d56b8
2037 Date: Fri Aug 31 15:21:46 2007 +0200
2039 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
2041 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
2042 set to non-zero, because it doesn't support MRM (memory-read-
2043 multiple) correctly. We now added the possibility to configure
2044 this register in the board config file, so that the default value
2045 of 8 can be overridden.
2047 Here the details of this patch:
2049 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
2050 board-specific settings. As an example the sequoia board requires 0.
2052 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
2054 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
2055 CFG_PCI_CACHE_LINE_SIZE to 0.
2060 commit 60174746c668b309378a91488dded898e9553eae
2062 Date: Fri Aug 31 10:01:51 2007 +0200
2064 Fix TFTP OACK code for short packets.
2066 The old code had a loop limit overflow bug which caused a semi-
2067 infinite loop for small packets, because in "i<len-8", "i" was signed,
2068 but "len" was unsigned, and "len-8" became a huge number for small
2071 This is a workaround which replaces broken commit 8f1bc284.
2075 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
2077 Date: Thu Aug 30 15:03:05 2007 +0200
2079 Reduce BOOTDELAY variable to 1 second by default for STK1002
2084 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
2086 Date: Thu Aug 30 15:03:04 2007 +0200
2088 Remove double quotation marks around MAC address for STK1002
2093 commit ff13ac8c7bbebb238e339592de765c546dba1073
2095 Date: Thu Aug 30 14:42:15 2007 +0200
2097 Backout commit 8f1bc284 as it causes TFTP to fail.
2101 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
2103 Date: Thu Aug 30 02:26:17 2007 -0500
2105 Revert "Fix MPC8544DS PCIe3 scsi."
2107 This reverts commit 9468e680.
2108 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
2112 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
2114 Date: Wed Aug 29 18:26:24 2007 -0600
2116 tftp: don't implicity trust the format of recevied packets
2118 The TFTP OACK code trusts that the incoming packet is formated as
2119 ASCII text and can be processed by string functions. It also has a
2120 loop limit overflow bug where if the packet length is less than 8, it
2121 ends up looping over *all* of memory to find the 'blksize' string.
2123 This patch solves the problem by forcing the packet to be null
2124 terminated and using strstr() to search for the sub string.
2128 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
2130 Date: Wed Aug 29 16:31:18 2007 +0200
2132 ppc4xx: Change lwmon5 default environment to support Linux RTC
2134 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
2135 to supply the RTC I2C address as bootline parameter. This patch
2136 adds support for this rtc probing parameter to the bootargs:
2138 "rtc-pcf8563.probe=0,0x51"
2142 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
2144 Date: Wed Aug 29 09:06:05 2007 -0500
2146 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
2148 this had slipped through the cracks, since the sbc board was added
2149 after I wrote the original patch to remove all these symbols, and
2150 before it was merged.
2154 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
2156 Date: Wed Aug 29 14:05:30 2007 +0200
2158 Add mii_init() prototype
2160 to get rid of a *lot* of compiler warnings.
2164 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
2166 Date: Wed Aug 29 13:35:03 2007 +0200
2168 Disable network support on cmi_mpc5xx board
2170 ..because it caused compiler errors and there seems to be no
2171 board maintainer to take care of this.
2175 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
2177 Date: Mon Aug 20 09:44:00 2007 -0500
2179 Fix MPC8544DS PCIe3 scsi.
2183 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
2184 is allocating memory space it doesn't need.
2189 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
2191 Date: Tue Aug 21 09:38:59 2007 -0500
2195 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
2196 correct consoledev needed for linux boot.
2197 Standardize on fdt{file,addr} var to hold dtb file name.
2199 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
2203 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
2205 Date: Thu Aug 23 15:20:54 2007 -0400
2207 Enable L2 cache for MPC8568MDS board
2209 The L2 cache size is 512KB for 8568, print out the correct informaiton.
2213 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
2215 Date: Wed Aug 22 17:54:49 2007 +0800
2217 Remove the bios emulator binary files from MAI board
2221 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
2223 Date: Tue Aug 21 17:00:17 2007 -0500
2225 support board vendor-common makefiles
2227 if a board/$(VENDOR)/common/Makefile exists, build it.
2229 also add the first such case, board/freescale/common/Makefile, to
2230 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
2231 dictated by board configuration.
2233 thusly get rid of alternate build dir errors such as:
2235 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
2237 by putting the common/ mkdir command in its proper place (the common
2238 Makefile). Common bits from existing individual board Makefiles have
2243 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
2245 Date: Tue Aug 21 15:52:33 2007 +0200
2247 Fix: TFTP is not working on little endian systems
2249 TFTP does not work anymore after multicast tftp
2250 patch was applied on little endian systems.
2255 commit 5f470948570526e9186f053a3003da7719604e90
2257 Date: Tue Aug 21 15:50:33 2007 +0200
2259 Fix MAC address setting in DM9000 driver.
2261 The logic to check if there is a correct MAC address in the DM9000
2262 EEPROM, added in the last patch, is wrong. Now the MAC address is
2263 always taken from the environment, even if a suitable MAC is present
2268 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
2270 Date: Tue Aug 21 12:40:34 2007 +0200
2272 MPC5xxx: fix some compiler warnings in USB code
2274 Fix the following warnings:
2275 - usb.c:xx: warning: function declaration isn't a prototype
2276 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
2277 from pointer wihtout a cast
2281 commit 16e23c3f5dab6937f5109365416808c7f15c122b
2283 Date: Mon Aug 20 23:55:33 2007 -0500
2285 fsl_pci_init - Remove self PCSRBAR allocation
2287 CPU physical address space was being wasted by allocating a
2288 PCSRBAR PCI inbound region to it's memory space.
2290 As a rule, PCSRBAR should be left alone since it does not affect
2291 transactions from self and other masters may have changed it.
2295 commit 0e700ce03a23bb1921149bc77008ace7103d5289
2297 Date: Mon Aug 20 13:56:47 2007 +0200
2299 Fix compiler warning in include/s3c2410.h
2301 This patch fixes the "type qualifiers ignored on fuction return tpye"
2302 warning for include/s3c2410.h
2306 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
2308 Date: Mon Aug 20 07:09:05 2007 +0200
2310 Fix compilation error for omap2420h4_config.
2312 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
2313 and flash_probe() calls in env_flash.c.
2317 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
2319 Date: Fri Aug 10 14:34:14 2007 -0500
2321 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
2323 and make some minor corrections to the FDT part of the README.
2327 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
2329 Date: Wed Aug 29 01:32:05 2007 +0200
2331 Minor coding style cleanup.
2335 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
2337 Date: Tue Aug 28 17:40:33 2007 +0200
2339 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
2343 commit f98984cb194bb34dbe1db9429d3b51133af30d07
2345 Date: Tue Aug 28 17:39:14 2007 +0200
2347 IDE: - make ide_inb () and ide_outb () "weak", so boards can
2348 define there own I/O functions.
2349 (Needed for the pcs440ep board).
2350 - The default I/O Functions are again 8 Bit accesses.
2351 - Added CONFIG_CMD_IDE for the pcs440ep Board.
2355 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
2357 Date: Mon Aug 20 19:00:01 2007 +0300
2359 AVR32: Change prototype of memset
2364 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
2366 Date: Sat Aug 25 05:07:16 2007 +0200
2368 POST: limit memory test area to not touch global data anymore
2370 As experienced on lwmon5, on some boards the POST memory test can
2371 corrupt the global data buffer (bd). This patch fixes this issue
2372 by checking and limiting this area.
2377 commit 75e1a84d483e36be10e206e539b028c4889e1158
2379 Date: Fri Aug 24 15:41:42 2007 +0200
2381 ppc4xx: Add RTC POST test to lwmon5 board configuration
2383 Since this RTC POST test is taking quite a while to complete
2384 it's only initiated upon special keypress same as the complete
2389 commit d7bfa620037a6d2210159387571bdf93aa32c162
2391 Date: Fri Aug 24 15:19:10 2007 +0200
2393 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
2397 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
2399 Date: Thu Aug 23 11:02:37 2007 +0200
2401 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
2403 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
2404 board. Now the "eeprom" command can be used to read/write from/to this
2405 device. Additionally a new command was added "eepromwp" to en-/disable
2406 the write-protect of this 2nd EEPROM.
2408 The 1st EEPROM is not affected by this write-protect command.
2412 commit c64fb30e4c5976007d56fc1789c7a0666082b536
2414 Date: Wed Aug 22 08:56:09 2007 +0200
2416 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
2420 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
2422 Date: Tue Aug 21 16:27:57 2007 +0200
2424 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
2426 This patch adds support for the matrix keyboard on the lwmon5 board.
2427 Since the implementation in the dsPCI is kind of compatible with the
2428 "old" lwmon board, most of the code is copied from the lwmon
2433 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
2435 Date: Sun Aug 19 10:27:34 2007 +0200
2437 Fix some build errors.
2441 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
2443 Date: Sat Aug 18 22:00:38 2007 +0200
2447 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
2449 Date: Thu Aug 16 22:52:39 2007 -0500
2451 lib_ppc: make board_add_ram_info weak
2453 platforms wishing to display RAM diagnostics in addition to size,
2454 can do so, on one line, in their own board_add_ram_info()
2457 this consequently eliminates CONFIG_ADD_RAM_INFO.
2459 Thanks to Stefan for the hint.
2463 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
2465 Date: Fri Aug 17 12:43:44 2007 +0900
2467 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
2469 This patch has been sent on:
2472 Many users of PCI config read routines tend to ignore the function
2473 ret value, and are only concerned about the contents of *val. Based
2474 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
2475 the *val on dword read error.
2477 Without this fix, for example, we'll go on scanning bus with vendor or
2478 header_type uninitialized. This brings many unnecessary config trials.
2482 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
2484 Date: Sat Aug 18 14:37:52 2007 +0200
2486 ColdFire: Fix some remaining problems with CFG_CMD_
2490 commit 8280f6a1c43247616b68224675188e5ccd124650
2492 Date: Sat Aug 18 14:33:02 2007 +0200
2494 Coding style cleanup
2498 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
2500 Date: Thu Aug 16 19:23:50 2007 -0500
2502 ColdFire: Add M5235EVB Platform for MCF523x
2506 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
2508 Date: Fri Aug 17 09:30:00 2007 -0500
2510 mpc83xx: fix typo in DDR2 programming
2512 introduced in the implement board_add_ram_info patch as I was cleaning out the
2513 magic numbers. sorry.
2517 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
2519 Date: Thu Aug 16 22:53:09 2007 -0500
2521 mpc83xx: move freescale boards to boards/freescale
2523 includes build fixes.
2527 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
2529 Date: Thu Aug 16 22:52:59 2007 -0500
2531 mpc83xx: suppress unused variable 'val8' warning
2535 commit bbea46f76f767b919070b4829bf34c86bd223248
2537 Date: Thu Aug 16 22:52:48 2007 -0500
2539 mpc83xx: implement board_add_ram_info
2541 add board_add_ram_info, to make memory diagnostic output more
2542 consistent. u-boot banner output now looks like:
2544 DRAM: 256 MB (DDR1, 64-bit, ECC on)
2546 and for boards with SDRAM on the local bus, a line such as this is
2549 SDRAM: 64 MB (local bus)
2551 also replaced some magic numbers with their equivalent define names.
2555 commit 14778585d1389d86d5846efec29e5fce892680ce
2557 Date: Fri Aug 17 10:35:59 2007 +0800
2559 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
2561 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
2562 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
2566 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
2568 Date: Thu Aug 16 15:05:11 2007 -0500
2570 ColdFire: Add M54455EVB for MCF5445x
2574 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
2576 Date: Thu Aug 16 13:20:50 2007 -0500
2578 ColdFire: Add M5253EVBE platform for MCF52x2
2582 commit a605aacd8324094199402816cc6d9124aba57b8d
2584 Date: Thu Aug 16 05:04:31 2007 -0500
2586 ColdFire: Add M5249EVB platform for MCF52x2
2590 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
2592 Date: Wed Aug 15 20:32:06 2007 -0500
2594 ColdFire: Update Freescale MCF52x2 platforms
2598 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
2600 Date: Wed Aug 15 19:55:10 2007 -0500
2602 ColdFire: Update EB+MCF-EV123 platform
2606 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
2608 Date: Wed Aug 15 19:46:38 2007 -0500
2610 ColdFire: update TASREG platform for MCF52x2
2614 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
2616 Date: Wed Aug 15 19:45:51 2007 -0500
2618 ColdFire: update r5200 platform for MCF52x2
2622 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
2624 Date: Wed Aug 15 19:43:20 2007 -0500
2626 ColdFire: idmr platform MCF52x2 update
2630 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
2632 Date: Wed Aug 15 19:41:06 2007 -0500
2634 ColdFire: cobra5272 platform for MCF52x2 update
2638 commit 56115665b4a64c10c01440c57749b265e0908fa4
2640 Date: Wed Aug 15 19:38:15 2007 -0500
2642 ColdFire: MCF52x2 Header files update
2646 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
2648 Date: Wed Aug 15 19:21:21 2007 -0500
2650 ColdFire: MCF52x2 update
2654 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
2656 Date: Wed Aug 15 18:46:11 2007 -0500
2658 ColdFire: MCF5329 update cache
2662 commit 7171977fb8fd77cfb6676953fa9a05789c450513
2664 Date: Wed Aug 15 15:40:20 2007 -0500
2666 ColdFire: MCF5329 header file clean up
2670 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
2672 Date: Wed Aug 15 15:39:17 2007 -0500
2674 ColdFire: MCF5329 Update and cleanup
2678 commit 10327dc5541f947c0cf7e31fef86c4706169607a
2680 Date: Thu Aug 16 16:35:02 2007 -0500
2682 Add CONFIG_HAS_ETH0 to all boards with TSEC
2684 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
2685 to update TSEC1's device-tree node, so we need to add it
2686 to all the boards with TSECs. Do this for 83xx and 86xx, too,
2687 since they will eventually do something similar.
2691 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
2693 Date: Thu Aug 16 15:05:04 2007 -0500
2695 Update MPC8544 DS PCI memory map
2697 The PCIe bus that the ULI M1575 is connected to has no possible way of
2698 needing more than the fixed amount of IO & Memory space needed by the ULI.
2700 So make it use far less IO & memory space and have it use the shared LAW. This
2701 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
2706 commit ea5877e31ed63ade948fd1293895ec23fe01472e
2708 Date: Thu Aug 16 11:01:21 2007 -0500
2710 Fix up some fdt issues on 8544DS
2712 It looks like we had a merge issue that duplicated a bit of code
2713 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
2714 the MAC address properly set in the device tree on boot for TSEC1
2718 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
2720 Date: Thu Aug 16 15:16:03 2007 +0200
2722 PPC4xx:HCU4/5 cleanup
2724 Minor cleanups to confirm to the u-boot coding style.
2725 Some german expressions -> english.
2726 HCU5 enforces a unique IP adress for a given slot in the rack.
2730 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
2732 Date: Thu Aug 16 15:16:02 2007 +0200
2734 PPC4xx:HCU4/5 cleanup ecc/sdram init
2736 Make ecc initialisation robust, as DDR2-ECC errors may be generated
2737 while zeroing the RAM.
2739 Return 16 bytes (a cacheline) less than the available memory, as the
2740 board and/or PPC440EPx might have problems accessing the last bytes.
2744 commit d35b508a55508535b6e8445b718585d27df733d3
2746 Date: Wed Aug 15 22:29:56 2007 -0500
2748 fdt: suppress unused variable 'bd' warning
2752 commit 82bd9ee77490588d4da785d75829ca63d0176baf
2754 Date: Wed Aug 15 20:06:50 2007 -0500
2756 Fix warnings from of_data copy fix
2758 Forgot to cast of_flat_tree to ulong.
2762 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
2764 Date: Wed Aug 15 20:03:44 2007 -0500
2766 Don't wait for disconnected TSECs
2768 The TSEC driver's PHY code waits a long time for autonegotiation to
2769 complete, even if the link is down. The PHY knows the link is
2770 down or up before autonegotiation completes, so we can short-circuit
2771 the process if the link is down.
2775 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
2777 Date: Wed Aug 15 20:03:34 2007 -0500
2779 Fix numerous bugs in the 8568 UEC support
2781 Actually, fixed a large bug in the UEC for *all* platforms.
2782 How did this ever work?
2784 uec_init() did not follow the spec for eth_init(), and returned
2785 0 on success. Switch it to return the link like tsec_init()
2788 The immap for the 8568 was defined based on MPC8568, rather than
2793 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
2795 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
2800 commit 3a79013e2adda53332dfd0b511066a805e929a9d
2802 Date: Wed Aug 15 20:03:25 2007 -0500
2804 Define tsec flag values in config files
2806 The tsec_info structure and array has a "flags" field for each
2807 ethernet controller. This field is the only reason there are
2808 settings. Switch to defining TSECn_FLAGS for each controller
2809 in the config header, and we can greatly simplify the array, and
2810 also simplify the addition of future boards.
2814 commit ec7238229507e7f47533a611ea8c53319d234cf3
2816 Date: Wed Aug 15 20:03:13 2007 -0500
2818 Add support for building all boards with a TSEC
2820 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
2821 Now we can do a MAKEALL test on all of them!
2825 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
2827 Date: Wed Aug 15 17:30:56 2007 -0500
2829 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
2831 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
2832 neglected to *also* put the code inside the similar #ifdef
2833 for CONFIG_OF_FLAT_TREE.
2837 commit 78f9fef7f406078c8bf7191e665a73f795157746
2839 Date: Wed Aug 15 15:46:46 2007 -0500
2841 mpc885ads: Don't define CONFIG_BZIP2.
2843 bzip2 requires a significant chunk of malloc space, and there isn't
2844 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
2845 and a downloaded image at 0x400000.
2849 commit 002275a3ed8b114885f6702d6d544d0780dfe689
2851 Date: Thu Aug 16 08:54:10 2007 +0200
2853 Bios emulator - fix microblaze toolchain problem
2855 microblaze CPU have problem with bios_emulator code.
2856 Microblaze toolchain doesn't support PRAGMA PACK.
2860 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
2862 Date: Thu Aug 16 11:51:04 2007 +0200
2864 Minor Coding Style fix; Update CHANGELOG file.
2868 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
2870 Date: Thu Aug 16 11:21:49 2007 +0200
2872 ppc4xx: Remove #warning in esd auto_update.c
2876 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
2878 Date: Fri Jun 22 17:32:28 2007 +0200
2880 ppc7xx: Update CPCI750 board
2882 This small CPCI750 update extends the board specific command
2883 "show_config" to display the Marvell strapping registers and
2884 extends the PCI IDE controller.
2889 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
2891 Date: Thu Aug 16 10:46:28 2007 +0200
2893 [FIX] Changes for bios_emulator code for others architecture
2895 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
2897 Date: Thu Aug 16 10:45:09 2007 +0200
2899 [FIX] Remove unused include file
2901 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
2903 Date: Thu Aug 16 10:18:33 2007 +0200
2905 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
2909 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
2911 Date: Thu Aug 16 09:54:51 2007 +0200
2913 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
2917 commit 02ba7022f62bb75908296c58c63866e1d294b69a
2919 Date: Thu Aug 16 09:52:29 2007 +0200
2921 ppc4xx: Update Sequoia/Rainier bootstrap command
2923 As suggested by David Mitchell, here an update for the Sequoia/Rainier
2928 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
2930 Date: Wed Aug 15 22:30:39 2007 -0500
2932 mpc83xx: enable libfdt by default on freescale boards
2934 this enables libfdt code by default for the
2935 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
2936 mpc8349itx and gp boards.
2940 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
2942 Date: Wed Aug 15 22:30:33 2007 -0500
2944 mpc83xx: migrate remaining freescale boards to libfdt
2946 this adds libfdt support code for the freescale
2947 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
2950 Boards remain compatible with OF_FLAT_TREE.
2954 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
2956 Date: Wed Aug 15 22:30:26 2007 -0500
2958 mpc83xx: move common /memory node update mechanism to cpu.c
2960 also adds common prototypes to include/common.h.
2964 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
2966 Date: Wed Aug 15 22:30:19 2007 -0500
2968 mpc83xx: remaining 8360 libfdt fixes
2970 PCI clocks and QE frequencies weren't being updated, and the core clock
2971 was being updated incorrectly. This patch also adds a /memory node if
2972 it doesn't already exist prior to update.
2974 plus some cosmetic trimming to single line comments.
2978 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
2980 Date: Wed Aug 15 22:30:12 2007 -0500
2982 mpc83xx: fix UEC2->1 typo in libfdt setup code
2986 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
2988 Date: Wed Aug 15 22:30:05 2007 -0500
2990 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
2992 and reorder the existing 83xx maintainers alpha.
2996 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
2998 Date: Wed Aug 15 21:15:05 2007 +0200
3000 [FIX] Resolve problem with warnings
3001 microblaze toolchain don't support PRAGMA PACK.
3003 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
3005 Date: Wed Aug 15 21:05:07 2007 +0200
3007 [FIX] Correction command setting for Microblaze boards
3009 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
3011 Date: Wed Aug 15 21:03:41 2007 +0200
3013 [FIX] Correction command definition
3015 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
3017 Date: Wed Aug 15 11:55:35 2007 -0500
3019 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
3021 Remove a leftover in net/tftp.c while we're at it.
3025 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
3027 Date: Wed Aug 15 12:20:40 2007 -0500
3029 Move the MPC8641HPCN board under board/freescale.
3031 Minor path corrections needed to ensure buildability.
3035 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
3037 Date: Wed Aug 15 11:46:22 2007 -0500
3039 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
3041 Remove a leftover in net/tftp.c while we're at it.
3045 commit 210f463c71917b7a4495c2103c228b9c179ae64d
3047 Date: Wed Aug 15 11:13:15 2007 -0400
3049 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
3051 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
3052 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
3053 when it should have gone inside of the conditional. As a result, it
3054 broke non-LIBFDT board builds.
3056 Also added a missing "not." to the comment.
3060 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
3062 Date: Wed Aug 15 12:14:23 2007 +0200
3064 PPC4xx:HCU4/5-Board fix compile warning
3068 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
3070 Date: Tue Aug 14 14:06:45 2007 -0500
3072 Fix malloc size error in ahci_init_one.
3074 Typically this causes scsi init to corrupt the
3075 devlist and break the coninfo command.
3076 Fix a compiler size warning.
3082 commit b361acd64fd2525c081b9b288b0804efe209c0e9
3084 Date: Tue Aug 14 10:02:16 2007 -0700
3086 TI DaVinci - fix unsupported %hhx format
3090 commit f01dbb5424a81453c81190dd30e945891466f621
3092 Date: Tue Aug 14 18:42:36 2007 +0200
3094 Coding style cleanup. Update CHANGELOG.
3098 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
3100 Date: Tue Aug 14 10:32:59 2007 -0500
3102 Fix initrd/dtb interaction
3104 The original code would wrongly relocate the blob to be right before
3105 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
3106 if it is defined. So we make two changes:
3108 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
3110 2) If the blob is being relocated, relocate it before kbd, not initrd
3114 commit e54b970173769307a116bd34028b6d0c2eea2a4e
3116 Date: Tue Aug 14 15:40:00 2007 +0100
3118 Supply spi interface in at45.c
3120 commit 4ce846ec59f36b85d6644a769690ad3feb667575
3122 Date: Tue Aug 14 15:12:01 2007 +0200
3124 POST: Fix merge problem
3128 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
3130 Date: Tue Aug 14 15:03:17 2007 +0200
3132 Coding style cleanup
3136 commit 779e975117a75e91fcebe226a63104dbfb924ab1
3138 Date: Tue Aug 14 14:44:41 2007 +0200
3140 ppc4xx: Add initial Zeus (PPC405EP) board support
3144 commit c5a172a5fd636c12467429e3f7910e53773979c6
3146 Date: Tue Aug 14 14:41:55 2007 +0200
3148 POST: Add option for external ethernet loopback test
3150 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
3151 is not done using an internal loopback connection, but by assuming
3152 that an external loopback connector is plugged into the board.
3156 commit eb2b4010ae426245172988804ee8d9193fb41038
3158 Date: Tue Aug 14 14:39:44 2007 +0200
3160 POST: Add ppc405 support to cache and UART POST
3164 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
3166 Date: Tue Aug 14 10:46:32 2007 +0100
3168 Replace lost end of at45.c.
3170 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
3172 Date: Tue Aug 14 10:30:06 2007 +0100
3174 Update Makefiles for merged and split at45.c.
3176 commit 3454cece2db57cb9eb7087995f7e73066a163f71
3178 Date: Tue Aug 14 10:21:06 2007 +0100
3180 Delete the merged files.
3182 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
3184 Date: Tue Aug 14 10:14:05 2007 +0100
3188 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
3190 Date: Tue Aug 14 10:10:52 2007 +0100
3192 Add MACH_TYPE records for several AT91 boards.
3193 Merge to two at45.c files into a common file, split to at45.c and spi.c
3194 Fix spelling error in DM9161 PHY Support.
3195 Initialize at91rm9200 board (and set LED).
3196 Add PIO control for at91rm9200dk LEDs and Mux.
3197 Change dataflash partition boundaries to be compatible with Linux 2.6.
3202 commit 4ef35e53c693556c54b0c22d6f873de87bade253
3204 Date: Tue Aug 14 09:54:46 2007 +0200
3206 Coding style cleanup, update CHANGELOG
3210 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
3212 Date: Tue Aug 14 09:47:27 2007 +0200
3214 Coding style cleanup; rebuild CHANGELOG
3216 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
3217 Author: Randy Vinson <rvinson@linuxbox.(none)>
3218 Date: Tue Feb 27 19:42:22 2007 -0700
3220 85xxCDS: Add make targets for legacy systems.
3222 The PCI ID select values on the Arcadia main board differ depending
3223 on the version of the hardware. The standard configuration supports
3224 Rev 3.1. The legacy target supports Rev 2.x.
3228 commit e41094c7e38177c755fbd9b182018069614f080d
3230 Date: Tue Aug 14 01:50:09 2007 -0500
3232 85xxCDS: Enable the VIA PCI-to-ISA bridge.
3234 Author: Randy Vinson <rvinson@linuxbox.(none)>
3236 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
3242 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
3244 Date: Tue Aug 14 00:14:25 2007 -0500
3246 Add support for UEC to 8568
3251 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
3253 Date: Tue Jun 19 14:18:34 2007 -0400
3255 Add PCI support for MPC8568MDS board
3257 This patch is against u-boot-mpc85xx.git of www.denx.com
3262 commit d111d6382c99fdea08c2312eeeae8786945e189a
3264 Date: Tue Jun 19 14:18:32 2007 -0400
3266 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
3268 This patch is against u-boot-mpc85xx.git of www.denx.com
3270 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
3271 both MPC8548CDS board and MPC8568MDS board, especially for supporting
3274 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
3275 DDR2 on all current board versions especially ver 1.92 or later to bring
3280 commit 3db0bef59eab1155801618cef5c481e97553b597
3282 Date: Tue Aug 7 18:07:27 2007 -0500
3284 Use an absolute address when jumping out of 4k boot page
3286 On e500 when we leave the 4k boot page we should use an absolute address since
3287 we don't know where the board code may want us to be really running at.
3291 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
3293 Date: Mon Aug 13 14:49:59 2007 -0500
3295 MPC85xx BA bits not set for 3-bit bank address DIMM
3297 The current implementation does not set the number of bank address bits
3298 (BA) in the processor. The default assumes 2 logical bank bits. This
3299 works fine for a DIMM that uses devices with 4 internal banks (SPD
3300 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
3301 devices with 8 internal banks (SPD byte17 = 0x8).
3305 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
3307 Date: Mon Aug 13 14:38:06 2007 -0500
3309 Fix minor 85xx warnings
3311 Some patches had inserted warnings into the build:
3312 * mpc8560ads declared data without using it
3313 * cpu_init declared ecm and immap without using it in all CONFIGs
3314 * MPC8548CDS.h had its default filenames changed so that they contained
3315 "\m" in the paths. Made the defaults not Windows-specific (or
3320 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
3322 Date: Fri Jul 27 01:50:52 2007 -0500
3324 8548cds PCIE support.
3326 Make the early L1 cache stack region guarded to prevent speculative
3327 fetches outside the locked range.
3329 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
3330 init.S whitespace cleanup.
3332 Allow TEXT_BASE value to be specified on command line. This allows it
3333 to be set to 0xfffc0000 which cuts the uboot binary in half.
3335 Clear and enable lbc and ecm errors.
3337 Update last_busno in device-tree for pci and pcie.
3339 Remove load of obsolete cpu/mpc85xx/pci.0
3344 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
3346 Date: Fri Jul 27 01:50:51 2007 -0500
3350 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
3352 Enable LBC and ECM errors and clear error registers.
3354 Add tftpflash env var to get uboot from tftp server and flash it.
3356 Add pci/pcie convenience env vars to display register space:
3357 "run pcie3regs" to see all pcie3 ccsr registers
3358 "run pcie3cfg" to see all cfg registers
3359 Whitespace cleanup and MPC8544DS.h
3361 Enable CONFIG_INTERRUPTS.
3366 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
3368 Date: Tue Aug 14 01:34:21 2007 -0500
3370 85xx start.S cleanup and exception support
3374 Support external interrupts from platform to eliminate system hangs.
3375 Define CONFIG_INTERRUPTS board configure option to enable.
3376 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
3378 Remove extra cpu initialization redundant with hardware initialization.
3381 Define and use _START_OFFSET consistent with other processors using
3384 Move additional code from .text to boot page to make room for
3385 exception vectors at start of image.
3387 Handle Machine Check, External and Critical exceptions.
3389 Fix e500 machine check error determination in traps.c
3391 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
3396 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
3398 Date: Tue Aug 14 01:33:18 2007 -0500
3400 Add MPC8544DS README
3404 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
3406 Date: Fri Jul 27 01:50:48 2007 -0500
3408 85xx allow debugger to configure ddr.
3410 Only check for mpc8548 rev 1 when compiled for 8548.
3415 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
3417 Date: Fri Jul 27 01:50:47 2007 -0500
3419 mpc85xx L2 cache reporting and SRAM relocation option.
3421 Allow debugger to override flash cs0/cs1 settings to enable alternate
3427 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
3429 Date: Fri Jul 27 01:50:46 2007 -0500
3431 e500 needs ppc_asm.tmp MCK_EXCEPTION
3433 Always define MCK_EXCEPTION macro - so e500 can use it too.
3438 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
3440 Date: Mon Jun 11 10:41:07 2007 -0500
3442 multicast tftp: RFC2090
3444 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
3445 on Realtek RTL8139 and Freescale TSEC.
3450 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
3452 Date: Sat Jul 28 10:56:13 2007 -0400
3454 New CONFIG_BOOTP_SERVERIP option
3456 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
3457 from the bootp server
3462 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
3464 Date: Sun Aug 12 08:48:27 2007 +0300
3466 Add ability to take MAC address from the environment to DM9000 driver
3471 commit be5d72d10d47609326226225181e301fb9a33b58
3473 Date: Mon Aug 13 21:57:53 2007 +0200
3475 Minor coding style cleanup. Update CHANGELOG.
3479 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
3481 Date: Sat Aug 11 06:54:58 2007 -0500
3483 Modify SBC8641D to use new Freescale PCI routines
3485 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
3491 commit a08458303e7f9db67f296980036d3292c35cb45c
3493 Date: Fri Jun 29 18:38:51 2007 +0200
3495 atmel_mci: Fix data timeout value
3497 Calculate the data timeout based on values from the CSD instead of
3498 just using a hardcoded DTOR value. This is a backport of a similar fix
3499 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
3504 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
3506 Date: Mon Aug 13 17:22:31 2007 +0200
3508 AVR32: Include <div64.h> instead of <asm/div64.h>
3510 include/asm-avr32/div64.h was recently moved to include/div64.h, but
3511 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
3512 the patch was merged perhaps?)
3514 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
3519 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
3521 Date: Wed Jun 27 13:34:26 2007 +0200
3523 atmel_mci: Use 512 byte blocksize if possible
3525 Instead of always using the largest blocksize the card supports, check
3526 if it can support smaller block sizes and use 512 bytes if possible.
3527 Most cards do support this, and other parts of u-boot seem to have
3528 trouble with block sizes different from 512 bytes.
3530 Also enable underrun/overrun protection.
3535 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
3537 Date: Mon Aug 13 09:05:33 2007 +0200
3539 ppc4xx: Fix problem in PLL clock calculation
3542 and fixes a bug in the PLL clock calculation.
3546 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
3548 Date: Sun Aug 12 21:34:50 2007 +0200
3552 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
3554 Date: Sun Aug 12 21:34:34 2007 +0200
3556 Minor alignment of output, 2nd try.
3557 Also update CHANGELOG
3561 commit 6b309f22a724fad8418e811751a0741b893419cf
3563 Date: Sun Aug 12 20:35:49 2007 +0200
3565 Minor alignment of output
3569 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
3571 Date: Sun Aug 12 18:28:18 2007 +0200
3573 Cleanup output on ADS5121 board
3575 Signed-off-by: Wolfgang Denk
3577 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
3579 Date: Sun Aug 12 15:11:38 2007 +0200
3581 Adapt board configuration and fix kernel crash on MCC200 board.
3583 The update procedure was modified to turn off the USB subsystem
3584 before exit for MCC200 and TRAB. This is necessary as otherwise the
3585 USB controller continues to write periodically to system memory!
3587 MCC200-specific notes:
3588 - the patch disables the magic key check for MCC200
3589 - the patch contains the configuration changes made
3590 for the new revision of the board.
3595 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
3597 Date: Sun Aug 12 14:47:54 2007 +0200
3599 Adjust default configuration of ADS5121 board.
3603 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
3605 Date: Sun Aug 12 14:27:39 2007 +0200
3607 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
3611 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
3613 Date: Tue Aug 7 21:14:22 2007 -0400
3615 Improve error print messages.
3619 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
3621 Date: Tue Jul 17 13:57:04 2007 -0500
3623 fdt: allow for builds that don't want env and bd_t nodes
3625 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
3630 commit 91148bf7aeba142d6f348805db7625db7da64d6f
3632 Date: Tue Jul 17 13:56:53 2007 -0500
3634 fdt: do board setup based on fdt address specified on bootm line
3636 The last fdt patch to bootm did board setup based on the address
3637 specified by a prior fdt address command invocation. The bootm
3638 code, as its call to fdt_chosen does, should use the fdt specified
3639 by the user on the bootm command. Note this restores full
3640 functionality for the 8360's existing default boot environment
3641 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
3642 before booting a kernel).
3646 commit e125a2ffc209dd34794e326c7175658253beadf3
3648 Date: Tue Jul 10 20:40:39 2007 -0400
3650 Call ft_board_setup() from the bootm command.
3652 In the patch titled "Create new fdt boardsetup command..." I removed the
3653 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
3654 to add a direct call back into cmd_bootm.c
3656 This fixes the oversight by adding the direct call to the bootm command.
3660 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
3662 Date: Mon Jun 25 23:25:28 2007 -0400
3664 Create new fdt boardsetup command, fix bug parsing [] form of set values.
3666 Previously ft_board_setup() was called by fdt_chosen() which was not
3667 really correctly structured. This splits ft_board_setup() out by creating
3668 a new fdt boardsetup command.
3670 Fix a bug when parsing fdt set command values which have the square
3671 bracket form [00 11 22 33] - the length was updated incorrectly in when
3676 commit 6f35ded9e85493595e0eb66a82b502a95326d049
3678 Date: Mon Jun 25 20:55:58 2007 -0400
3680 Tighten up the error messages.
3684 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
3686 Date: Mon Jun 25 19:52:23 2007 -0400
3688 Asthetic improvements: error messages and line lengths.
3690 Tighten up the error messages, split overlength lines.
3694 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
3696 Date: Fri May 25 22:08:57 2007 -0400
3698 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
3700 The fdt_chosen() function was adding/seting some properties ad-hoc
3701 improperly and duplicated (poorly) what was done in ft_board_setup()
3703 Clean up long lines (setting properties, printing errors).
3707 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
3709 Date: Mon May 21 23:27:16 2007 -0400
3711 For fdt_find_node_by_path(), handle the root path properly.
3713 Also removes the special case root path detection in cmd_fdt.c since it
3714 is no longer necessary.
3718 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
3720 Date: Thu May 17 23:54:36 2007 -0400
3722 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
3727 commit 1a861169bc3758f9de3aead62b058736c6891246
3729 Date: Wed Jun 6 22:47:58 2007 -0400
3731 Replace fdt_node_offset() with fdt_find_node_by_path().
3733 The new name matches more closely the kernel's name, which is also
3734 a much better description.
3739 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
3741 Date: Wed May 16 22:39:59 2007 -0400
3743 Fix cmd_fdt line lengths, refactor code.
3745 Break lines that were greater than 80 characters in length.
3746 Move the fdt print and property parsing code to separate static functions
3747 to reduce coding clutter in the fdt_cmd handling body.
3751 commit 25114033ab21788810c48ba4df103b649da1223b
3753 Date: Sat May 12 09:47:25 2007 -0400
3755 FDT command improvements.
3757 Fix "fdt set" so that it will create a non-existing property.
3758 Add "fdt mknode" to create nodes.
3762 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
3764 Date: Sat May 12 09:45:46 2007 -0400
3766 Reorganize and fix problems (returns) in the bootm command.
3768 Do *NOT* return after the "point of no return" has been passed.
3769 If something goes wrong, the board must be reset after that point.
3770 Move the "Transferring control to Linux" debug message back to where it
3771 belongs: just before transferring control to linux.
3775 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
3777 Date: Tue May 8 21:27:35 2007 -0400
3779 Fix bugs in the CONFIG_OF_LIBFDT
3781 Stupid coding mistakes (identified by Timur Tabi, thanks).
3785 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
3787 Date: Wed Apr 25 22:47:15 2007 -0400
3789 Improve fdt move length handling.
3791 Make the length parameter optional: if not specified, do the move using
3792 the current size unchanged.
3796 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
3798 Date: Wed Apr 25 22:23:36 2007 -0400
3800 Minor code clean up.
3802 Declare the variable fdt properly as extern.
3803 Call the "set_fn" function pointer the "short way" without the full
3804 dereferencing syntax.
3808 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
3810 Date: Wed Apr 25 21:24:27 2007 -0400
3812 Improve error messages, more informative.
3814 Print more than the raw libfdt error message strings. This is especially
3815 useful for cluing in the user when the bootm command aborts due to
3820 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
3822 Date: Fri Apr 20 22:46:53 2007 -0400
3824 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
3826 This is the way u-boot reduces configured-out code. At Wolfgang
3827 Grandegger and Wolfgang Denk's request, make libfdt conform.
3831 commit 923efd286411ed052d9e074f59f8986d6081061c
3833 Date: Fri Aug 10 14:54:47 2007 -0700
3835 add image size and descriptors for Spartan 3E FPGA chips
3837 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
3841 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
3843 Date: Fri Aug 10 15:34:48 2007 -0500
3845 make MAKEALL more immune to merge conflicts
3847 ..by placing board entries one per line, as suggested by jdl.
3851 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
3853 Date: Fri Aug 10 13:28:25 2007 -0500
3855 README: Remove outdated cpu type, board type, and NAME_config lists
3859 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
3861 Date: Fri Aug 10 15:48:59 2007 +0800
3863 mpc83xx: Suppress the warning 'burstlen'
3865 suppress the warning 'burstlen' of spd_sdram.
3869 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
3871 Date: Thu Aug 9 15:11:03 2007 -0500
3873 Add support for SBC8641D. Config files.
3875 Add support for Wind River's SBC8641D reference board.
3881 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
3883 Date: Thu Aug 9 15:10:53 2007 -0500
3885 Add support for SBC8641D. Board files.
3887 Add support for Wind River's SBC8641D reference board.
3893 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
3895 Date: Fri Aug 10 20:34:58 2007 +0200
3897 Conding style cleanup
3901 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
3903 Date: Fri Aug 10 20:26:18 2007 +0200
3905 [ARM] TI DaVinci support, hopefully final
3907 Add support for the following DaVinci boards:
3914 - Split into separate board directories
3915 - Removed changes to MTD_DEBUG (or whatever it's called)
3916 - New CONFIG_CMD party line followed
3917 - Some cosmetic fixes, cleanup etc.
3918 - Patches against the latest U-Boot tree as of now.
3919 - Fixed CONFIG_CMD_NET in net files.
3920 - Fixed CONFIG_CMD_EEPROM for schmoogie.
3921 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
3922 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
3923 but it at least compiles.
3925 Here is an excerpt from session log on SCHMOOGIE...
3927 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
3936 ETH PHY : DP83848 @ 0x01
3938 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
3939 U-Boot > ping 192.168.253.10
3940 host 192.168.253.10 is alive
3948 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
3950 Date: Fri Jul 27 01:50:45 2007 -0500
3952 fsl_pci_init cleanup.
3954 Do not enable normal errors created during probe (master abort, perr,
3955 and pcie Invalid Configuration access).
3957 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
3962 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
3964 Date: Fri Jul 27 01:50:44 2007 -0500
3966 pciauto_setup_device bars_num fix
3968 Passing bars_num=0 to pciauto_setup_device should assign no bars.
3974 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
3976 Date: Mon Aug 6 17:39:44 2007 -0500
3978 8641hpcn: Do correct sized pointer math.
3980 When I rebased Ed's patch and cleaned up a few compilation
3981 problems, I apparently rebased my brain on crack first.
3982 Fix that by doing (char *) sized pointer math as needed.
3986 commit cfc7a7f5bb3273c9951173c788001d45118f141f
3988 Date: Thu Aug 2 14:42:20 2007 -0500
3993 Always set PICGCR_MODE.
3994 Enable machine check and provide board config option
3995 to set and handle SoC error interrupts.
3997 Include MSSSR0 in error message.
3999 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
4004 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
4006 Date: Fri Aug 10 10:42:25 2007 +0200
4008 Coding style cleanup
4012 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
4014 Date: Thu Aug 2 17:42:08 2007 +0200
4016 Make use of generic 64bit division in nand_util.c
4018 Use generic 64bit division in nand_util.c. This makes nand_util.c
4019 independent of any toolchain 64bit division.
4023 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
4025 Date: Thu Aug 2 17:41:14 2007 +0200
4027 Move 64bit division from avr32 to generic lib
4029 Move the 64bit division from lib_avr32 to lib_generic. With this, all
4030 boards can do_div/__div64_32 if needed, not only avr one. Code is put
4031 to lib_generic, so no larger memory footprint if not used. No code
4032 modifications. Thanks for proposal by Håvard Skinnemoen.
4036 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
4038 Date: Fri Jul 27 11:31:22 2007 +0200
4040 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
4044 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
4046 Date: Fri Jul 27 11:30:33 2007 +0200
4048 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
4052 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
4054 Date: Fri Jul 27 11:38:26 2007 +0200
4056 Add PPC4xx-HCU4 and HCU5 boards: common files
4060 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
4062 Date: Fri Jul 27 11:28:44 2007 +0200
4064 Add PPC4xx-HCU4 and HCU5 boards: make related
4068 commit 137fdd9f474ecb853efdace5200576308c67f18d
4070 Date: Fri Jul 27 11:28:03 2007 +0200
4072 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
4076 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
4078 Date: Fri Jul 27 11:27:15 2007 +0200
4080 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
4084 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
4086 Date: Fri Jul 27 11:25:31 2007 +0200
4088 Add PPC4xx-HCU4 and HCU5 boards: READMEs
4092 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
4094 Date: Fri Jul 27 11:37:40 2007 +0200
4096 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
4098 This series of patches adds support for 2 boards from Netstal Maschinen.
4100 The HCU4 has a PPC405Gpr and
4101 the HCU5 has a PPC440EPX.
4103 The HCU4 has a somehow complicated flash setup, as the booteprom is
4104 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
4107 The HCU5 has only a booteprom as the whole code will be downloaded from a
4108 different board which has HD, CD-ROM, etc and where all code is stored.
4110 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
4115 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
4117 Date: Fri Aug 10 08:42:55 2007 +0200
4119 ppc4xx: Update lwmon5 POST configuration
4123 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
4125 Date: Fri Aug 10 08:25:22 2007 +0200
4127 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
4129 The patch adds support for UART POST on ppc44x-based boards with no
4130 external serial clocks installed.
4135 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
4137 Date: Mon Aug 6 18:18:34 2007 -0500
4139 mpc83xx: fix ITX[GP] O=builddir builds
4141 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
4143 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
4144 "BUILD_DIR=<some dir> ./MAKEALL ..."
4148 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
4150 Date: Wed Aug 1 15:00:59 2007 +0800
4152 mpc83xx: Correct the README for DDR ECC
4154 Update the README for DDR ECC, change the name
4155 to README.mpc83xx.ddrecc.
4160 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
4162 Date: Wed Aug 1 15:00:15 2007 +0800
4164 mpc83xx: Consolidate the ECC support of 83xx
4166 Remove the duplicated source code of ecc command on the <board>.c,
4167 for reused, move these code to cpu/mpc83xx directory.
4172 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
4174 Date: Sat Aug 4 13:37:39 2007 +0800
4176 mpc83xx: Correct the burst length for DDR2 with 32 bits
4178 The burst length should be 4 for DDR2 with 32 bits bus
4182 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
4184 Date: Wed Jul 25 19:25:33 2007 -0500
4186 mpc83xx: add support for the MPC8323E RDB
4188 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
4189 five 10/100 ethernet ports connected via an ICPlus IP175C
4190 switch, one PCI slot, and serial. Features not supported
4191 in this patch are SD card interface, 2 USB ports, and the
4197 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
4199 Date: Wed Jul 25 19:25:28 2007 -0500
4201 mpc83xx: fixup generic pci for libfdt
4203 add libfdt support to the generic 83xx pci code
4207 commit f57ac7a7b37109245b69db80839ebee26179966a
4209 Date: Wed Jul 25 19:25:22 2007 -0500
4211 mpc83xx: fix 8360 and cpu functions to update fdt being passed
4213 ..and not the global fdt. Rename local fdt vars to blob so as not to
4214 be confused with the global var with the same three-letter name.
4218 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
4220 Date: Wed Jul 4 21:34:24 2007 -0400
4222 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
4224 Several node strings were not correct (trailing slashes and properties
4226 Added setting of the timebase-frequency.
4227 Improved error messages and use debug() instead of printf().
4232 commit 26d02c9bbac1751c5e19294f000100b48d43a920
4234 Date: Wed Jul 4 21:27:30 2007 -0400
4236 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
4238 The new name matches more closely the kernel's name, which is also
4239 a much better description.
4241 These are the mpc83xx changes made necessary by the function name change.
4247 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
4249 Date: Mon Jun 25 10:41:56 2007 +0800
4251 mpc83xx: Add support for the display of reset status
4253 83xx processor family has many reset sources, such as
4254 power on reset, software hard reset, software soft reset,
4255 JTAG, bus monitor, software watchdog, check stop reset,
4256 external hard reset, external software reset.
4257 sometimes, to figure out the fault of system, we need to
4258 know the cause of reset early before the prompt of
4264 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
4266 Date: Mon Jun 25 10:41:04 2007 +0800
4268 mpc83xx: Fix the align bug of SDMA buffer
4270 According to the latest user manual, the SDMA temporary
4271 buffer base address must be 4KB aligned.
4276 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
4278 Date: Mon Jun 25 13:21:12 2007 +0800
4280 mpc83xx: Revise the MPC8360EMDS readme doc
4282 When the rev2.x silicon mount on the MPC8360EMDS baord,
4283 and if you are using the u-boot version after the commit
4284 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
4285 to make the ethernet interface usable, we have to setup
4286 the jumpers correctly.
4291 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
4293 Date: Tue Jul 3 13:46:32 2007 -0500
4295 FSL I2C driver programs the two I2C busses differently
4297 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
4298 The second I2C bus has its slave address programmed incorrectly and is
4299 missing a 5-us delay.
4304 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
4306 Date: Tue Jul 3 13:04:34 2007 -0500
4308 Update SCCR programming in cpu_init_f() to support all 83xx processors
4310 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
4311 bitfields for all 83xx processors. The code to update some bitfields was
4312 compiled only on some processors. Now, the bitfields are programmed as long
4313 as the corresponding CFG_SCCR option is defined in the board header file.
4314 This means that the board header file should not define any CFG_SCCR macros
4315 for bitfields that don't exist on that processor, otherwise the SCCR will be
4316 programmed incorrectly.
4321 commit 9546266999f0b9b51372636614211b88d90f0f25
4323 Date: Fri Jun 22 13:04:22 2007 +0200
4325 TQM834x: cleanup configuraton
4327 Remove irritating #undef DEBUG
4332 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
4334 Date: Mon Jun 18 09:09:53 2007 -0700
4336 MPC83xx: Fix makefile to generate config.h file in the build directory
4338 MPC83xx: Fix the Makefile config sections to generate the include/config.h
4339 file in the build directory instead of the source directory.
4344 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
4346 Date: Thu Jun 14 20:07:33 2007 -0500
4348 mpc83xx: Add support for 8360 silicon revision 2.1
4350 This change adds 8360 silicon revision 2.1 support to u-boot.
4355 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
4357 Date: Wed Aug 8 04:14:28 2007 -0500
4359 Treat ppc64 host as ppc
4363 commit 0dc4279b08ff82472bec2e2c90858602459febe8
4365 Date: Wed Aug 8 09:01:46 2007 +0800
4367 Minor fix for bios emulator makefile
4369 Add $(obj) to LIB avoiding objects be built in the source dir
4373 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
4375 Date: Wed Aug 8 08:33:11 2007 +0800
4377 Add CONFIG_BIOSEMU define to guard all the bios emulator code
4381 This patch fix the compile issue on the board that did not enable the bios emulator
4383 commit ed8106433522f2ea8933e9808346860d061d7731
4385 Date: Tue Jul 31 12:27:25 2007 -0500
4387 tsec: fix multiple PHY support
4389 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
4390 broke multiple PHY support in tsec.c. This fixes it.
4395 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
4397 Date: Thu Aug 9 09:08:18 2007 -0500
4399 tsec: Allow Ten Bit Interface address to be configurable
4401 Allow the address of the Ten Bit Interface (TBI) to be changed in the
4402 event of a conflict with another device.
4406 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
4408 Date: Wed Aug 8 09:54:26 2007 +0200
4410 Coding style cleanup
4414 commit a41de1f0d373e09c782dea558385a06247111ba5
4416 Date: Sun Aug 5 05:15:18 2007 -0500
4418 Port enabled for I2C signals and chipselects port configuration.
4422 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
4424 Date: Sun Aug 5 04:31:18 2007 -0500
4430 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
4432 Date: Sun Aug 5 04:11:20 2007 -0500
4438 commit 99c03c175d2689093176facf17c58ce2cb320001
4440 Date: Sun Aug 5 03:58:52 2007 -0500
4442 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
4446 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
4448 Date: Sun Aug 5 03:55:21 2007 -0500
4450 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
4454 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
4456 Date: Sun Aug 5 03:43:30 2007 -0500
4458 Moved sync() from board file to include/asm-m68k/io.h
4462 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
4464 Date: Sun Aug 5 03:30:44 2007 -0500
4466 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
4470 commit 9998bd37ead85e93953559720710d3b0685c81e6
4472 Date: Sun Aug 5 03:19:10 2007 -0500
4474 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
4478 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
4480 Date: Tue Aug 7 16:17:06 2007 +0800
4482 Add CONFIG_BIOSEMU define to guard all the bios emulator code
4484 This patch fix the compile issue on the board that did not enable the bios emulator
4486 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
4488 Date: Tue Aug 7 16:02:13 2007 +0200
4490 Fix missing brace error in fs/fat/fat.c
4491 [pointed out by Roderik Wildenburg]
4495 commit 706714d97a0d08d59eda4de2268c39f504688329
4497 Date: Mon Aug 6 23:41:53 2007 +0200
4499 [FIX] remove cute code
4501 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
4503 Date: Mon Aug 6 23:35:26 2007 +0200
4505 [FIX] Fix romfs code
4507 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
4509 Date: Mon Aug 6 23:31:49 2007 +0200
4511 [FIX] Coding style cleanup - Wolfgang's suggestions
4513 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
4515 Date: Mon Aug 6 23:21:05 2007 +0200
4517 Fixed typo in README (pointed out by Martin Jost).
4521 commit 537223afa61f64480df31ce440a9cb386df4a814
4523 Date: Mon Aug 6 21:10:17 2007 +0200
4525 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
4528 here an updated Bamboo README.
4532 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
4534 Date: Mon Aug 6 02:17:36 2007 +0200
4536 Coding style cleanup. Update CHANGELOG.
4540 commit 221838cc7eb178370ff62aa05920a582e12ac322
4542 Date: Tue Jul 10 09:03:22 2007 +0800
4544 Remove the bios emulator from MAI board.
4546 The bios emulator in the MAI board can not pass compile
4547 and have a lot of crap in it. remove it and will have a
4548 clean and small bios emulator in the drivers directory
4549 which can be uesed for every board.
4553 commit 5618332409bb96f4448d1712899369fc80c0b489
4555 Date: Fri Jul 13 12:14:59 2007 +0800
4557 Fix some compile issues for MAI board.
4561 commit 0f460a1ee148b648ee242c3157650287d4296260
4563 Date: Fri Jul 13 12:14:58 2007 +0800
4565 Configurations for ATI video card BIOS emulator
4567 This patch add definition of the BIOS emulator and the ATI framebuffer
4568 driver for MPC8641HPCN board.
4573 commit ece92f85053b8df613edcf05b26a416cbc3d629c
4575 Date: Fri Jul 6 08:34:56 2007 +0800
4577 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
4578 ATI video card BIOS. and can be used for x86 code emulation by some
4583 commit 5072188acabde3178fac7f5a597150e6e74fd40c
4585 Date: Fri Jul 6 08:33:33 2007 +0800
4587 This is a framebuffer driver for ATI video card, can work for PCI9200,
4588 X300, X700, X800 ATI video cards.
4593 commit 5728be389e65fd47f34b33c2596271eb4db751ae
4595 Date: Mon Aug 6 01:01:49 2007 +0200
4597 Coding style cleanup. Update CHANGELOG.
4601 commit 8092fef4c29b395958bb649647da7e3775731517
4603 Date: Tue Dec 12 14:26:01 2006 +0100
4605 Add functions to list of exported functions
4607 Additionally export the following fuctions (to make trab_config build again):
4611 Also bump the ABI version to reflect this change
4615 commit 63cec5814fab5d2b1c86982327433807a5ac0249
4617 Date: Thu Aug 2 14:09:49 2007 -0500
4619 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
4621 All of the PCI/PCI-Express driver and initialization code that
4622 was in the MPC8641HPCN port has now been moved into the common
4623 drivers/fsl_pci_init.c. In a subsequent patch, this will be
4624 utilized by the 85xx ports as well.
4626 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
4628 Also enable the second PCI-Express controller on 8641
4629 by getting its BATS and CFG_ setup right.
4631 Fixed a u16 vendor compiler warning in AHCI driver too.
4637 commit a274ca4f6d68830e7c916f897561cff8c4101c38
4639 Date: Sun Aug 5 22:33:05 2007 +0200
4641 [FIX] Coding style cleanup
4643 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
4645 Date: Sun Aug 5 16:13:31 2007 +0200
4647 [FIX] Xilinx Uartlite driver
4648 Because PPC405 can use UARTLITE serial interface and
4649 Microblaze can use Uart16550 serial interface not only Uartlite.
4651 commit 98889edd50aadf862071eb5664747ad0d568a20e
4653 Date: Sun Aug 5 15:54:53 2007 +0200
4655 [FIX] Change configuration for XUPV2P Microblaze board
4657 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
4659 Date: Sun Aug 5 15:53:50 2007 +0200
4661 [PATCH] Added support for Xilinx Emac community driver
4663 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
4665 Date: Fri Aug 3 12:08:16 2007 +0200
4667 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
4669 Add the ability for modules from the Schindler cm5200 family to use a
4670 single U-Boot image:
4671 - rename cm1_qp1 to cm5200
4672 - add run-time module detection
4673 - parametrize SDRAM configuration according to the module we are running on
4675 Few minor, board-specific fixes included in this patch:
4676 - better MAC address handling
4677 - updated default environment ('update' command uses +{filesize} now)
4678 - improved error messages in the auto-update code
4679 - allow booting U-Boot from RAM (CFG_RAMBOOT)
4685 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
4687 Date: Fri Aug 3 04:05:25 2007 -0500
4689 Add Marvell 1149 PHY support to the TSEC
4691 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
4693 Date: Thu Aug 2 21:27:46 2007 +0200
4695 Coding style cleanup, update CHANGELOG
4699 commit 63e22764d2f8653f68888c667eb65b3996b52680
4701 Date: Thu Aug 2 10:11:18 2007 +0200
4703 Minor cleanup of <board>_nand build rules.
4705 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
4707 Date: Thu Aug 2 08:33:56 2007 +0200
4709 ppc4xx: Code cleanup
4713 commit c92409812206ac67a7fa7aae298539a9c3804a46
4715 Date: Tue Jul 31 18:51:48 2007 +0200
4717 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
4719 During config transactions on the PCIe bus an attempt to scan for a
4720 non-existent device can lead to a machine check exception with certain
4721 peripheral devices. In order to avoid crashing in such scenarios the
4722 instrumented versions of the config cycle read routines are introduced, so
4723 the exceptions fixups framework can gracefully recover.
4728 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
4730 Date: Tue Jul 31 18:19:54 2007 +0200
4732 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
4734 This brings back separate settings for PCIe bus numbers depending on chip
4735 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
4736 commit. 440SPe rev. A does NOT work properly with the same settings as for
4737 the rev. B (no devices are seen on the bus during enumeration).
4741 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
4743 Date: Thu Aug 2 00:48:45 2007 +0200
4745 Fix build errors and warnings / code cleanup.
4749 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
4751 Date: Tue Jul 31 10:24:56 2007 +0200
4753 ppc4xx: Update AMCC Bamboo 440EP support
4755 Changed storage type of cfg_simulate_spd_eeprom to const
4756 Changed storage type of gpio_tab to stack storage
4757 (Cannot access global data declarations in .bss until afer code relocation)
4759 Improved SDRAM tests to catch problems where data is not uniquely addressable
4760 (e.g. incorrectly programmed SDRAM row or columns)
4762 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
4763 Fixed AM29LV320DT (OpCode Flash) sector map
4768 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
4770 Date: Tue Jul 31 08:37:01 2007 +0200
4772 ppc4xx: Update 440EPx lwmon5 board support
4774 - Clear ECC status regs after ECC POST test
4775 - Set dcbz for ECC generation with caches enabled as default
4780 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
4782 Date: Mon Jul 30 11:04:57 2007 +0200
4784 ppc4xx: Only print ECC related info when the error bis are set
4788 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
4790 Date: Fri Jul 27 16:44:31 2007 +0200
4792 new FPGA image for PLU405 board
4794 new FPGA image for PLU405 board with improved CompactFlash timing
4798 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
4800 Date: Fri Jul 27 14:43:59 2007 +0200
4802 [ADS5121] Support for the ADS5121 board
4804 The following MPC5121e subsystems are supported:
4806 - low-level CPU init
4807 - NOR Boot Flash (common CFI driver)
4817 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
4819 Date: Fri Jul 27 14:22:04 2007 +0200
4821 [PPC] Remove unused MSR_USER definition
4825 commit d4024bb72dd81695ec099b2199eda0d27c623e62
4827 Date: Thu Jul 26 17:49:11 2007 +0200
4829 ppc4xx: Add support for AMCC 405EP Taihu board
4833 commit b66091de6c7390620312c2501db23d8391e7cabb
4835 Date: Thu Jul 26 15:08:01 2007 +0200
4837 ppc4xx: lwmon5: Update Lime initialization
4839 Change Lime SDRAM initialization to now support 100MHz and
4840 133MHz (if enabled). Also the framebuffer is initialized to
4841 display a blue rectangle with a white border.
4846 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
4848 Date: Tue Jul 24 09:52:52 2007 +0200
4850 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
4852 The used Intel NOR FLASH chips have internally two dies, and are now
4853 treated as two seperate chips.
4857 commit aedf5bde179ecfbd0a96130d18996a96518b785f
4859 Date: Tue Jul 24 07:20:09 2007 +0200
4861 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
4863 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
4864 interrupt controller.
4868 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
4870 Date: Fri Jul 20 15:03:44 2007 +0200
4872 ppc4xx: Fix bug with default GPIO output value
4874 As spotted by Matthias Fuchs, the default output values for all GPIO1
4875 outputs were not setup correctly. This patch fixes this issue.
4879 commit 531e3e8b831f357056448fa573137d5fb37000fd
4881 Date: Fri Jul 20 15:03:03 2007 +0200
4883 POST: Add ECC POST for the lwmon5 board
4885 This patch adds ECC Post test for the Lwmon5 board based
4886 on PPC440EPx to U-Boot.
4892 commit cc3023b9f95d7ac959a764471a65001062aecf41
4894 Date: Thu Jul 19 17:12:28 2007 +0200
4896 Fix breakage of 8xx boards from recent commit.
4898 This patch fixes the negative consequences for 8xx of the recent
4899 "ppc4xx: Clean up 440 exceptions handling" commit.
4903 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
4905 Date: Mon Jul 16 13:11:12 2007 +0200
4907 Coding style cleanup
4911 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
4913 Date: Mon Jul 16 10:02:12 2007 +0200
4915 ppc4xx: Code cleanup
4919 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
4921 Date: Mon Jul 16 10:01:38 2007 +0200
4923 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
4927 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
4929 Date: Mon Jul 16 10:00:43 2007 +0200
4931 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
4933 The new boardspecific DDR2 controller configuration is used for the Yucca
4934 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
4938 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
4940 Date: Mon Jul 16 09:57:00 2007 +0200
4942 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
4944 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
4945 support non default, boardspecific DDR(2) controller configuration.
4949 commit 5743a9207a370b90f09b20ebd61167c806b937f3
4951 Date: Mon Jul 16 08:53:51 2007 +0200
4953 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
4955 The new function remove_tlb() can be used to remove the TLB's used to
4956 map a specific memory region. This is especially useful for the DDR(2)
4957 setup routines which configure the SDRAM area temporarily as a cached
4958 area (for speedup on auto-calibration and ECC generation) and later
4959 need this area uncached for normal usage.
4963 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
4965 Date: Mon Jul 16 00:31:07 2007 +0200
4967 [PATCH] Support for Xilinx EmacLite controller
4969 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
4971 Date: Sat Jul 14 22:51:02 2007 +0200
4977 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
4979 Date: Sat Jul 14 13:11:28 2007 +0200
4981 [FIX] support for simply measuring time
4983 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
4985 Date: Sat Jul 14 12:41:23 2007 +0200
4987 [FS] Added support for ROMFS
4989 commit 011595307731a7a67a7445d107c279d031e8ab97
4991 Date: Sat Jul 14 01:06:58 2007 +0200
4993 [PCS440EP] - fix compile error, if BUILD_DIR is used
4995 commit 5a2f1098d81ad58b309e5e558d0492643166a799
4997 Date: Sat Jul 14 00:18:48 2007 +0200
4999 [PATCH] Support time without timer
5001 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
5003 Date: Fri Jul 13 21:43:55 2007 +0200
5005 [PATCH] Remove problem with disabled BARREL SHIFTER
5007 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
5009 Date: Fri Jul 13 21:41:44 2007 +0200
5011 [FIX] correct help for rspr
5013 commit fad63407154f46246ce80d53a9c669a44362ac67
5015 Date: Fri Jul 13 09:54:17 2007 +0200
5017 make show_boot_progress () weak.
5021 commit 907902472391b6ca1876ec300687562ecaf459b1
5023 Date: Fri Jul 13 08:26:05 2007 +0200
5025 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
5026 - fix compile error, if BUILD_DIR is used
5030 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
5032 Date: Thu Jul 12 16:32:08 2007 +0200
5034 ppc4xx: Change receive buffer handling in the 4xx emac driver
5036 This change fixes a bug in the receive buffer handling, that
5037 could lead to problems upon high network traffic (broadcasts...).
5041 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
5043 Date: Thu Jul 12 01:45:34 2007 +0200
5045 Update CHANGELOG, minor coding style cleanup.
5049 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
5051 Date: Fri Jun 8 16:41:18 2007 -0500
5053 Remove erroneous errata code from Marvel 88E1111S driver
5055 The Marvel 88E1111S driver for the TSEC was copied from the
5056 88E1101 driver, and included a fix for an erratum which does not
5057 exist on that part. Now it is removed
5061 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
5063 Date: Tue Jun 5 16:38:44 2007 -0500
5067 adds the reset register to 85xx immap
5072 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
5074 Date: Thu May 10 17:50:01 2007 -0500
5076 Polished the 85xx ADS config files
5078 Made the boot commands use device trees by default.
5079 Also moved the ramdisk to 1000000 (I think the previous address
5080 was getting overridden during boot).
5084 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
5086 Date: Wed May 9 11:03:32 2007 -0500
5088 8544ds: Fix Makefile after moving pixis to board/freescale.
5090 The OBJTREE != SRCTREE build scenario was broken.
5096 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
5098 Date: Wed May 9 00:54:20 2007 -0500
5100 tsec: Fix PHY code to match first driver
5102 Jarrold Wen noticed that the generic PHY code always matches
5103 under the current implementation. Change it so the first match
5104 wins, and *only* unknown PHYs trigger the generic driver
5108 commit ccc091aac61a38cd998d575d92f7232e256d6312
5110 Date: Tue May 8 17:27:43 2007 -0500
5112 Add support for CPM device tree configuration to 8560 ADS
5114 * Adds code to modify CPM frequencies
5115 * Cleans up the config file to #define TSEC and (for now) #undef FCC
5116 * Adds the MII command for all 8560 ADS configurations
5117 * Updates config file to provide convenience commands for booting
5123 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
5125 Date: Tue May 8 17:23:02 2007 -0500
5127 Fix Marvell 88e1145 PHY init code
5129 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
5130 where the reset was being done after the errata code instead of
5136 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
5138 Date: Wed Jul 11 14:52:16 2007 -0500
5140 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
5144 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
5146 Date: Wed Jul 11 14:52:08 2007 -0500
5148 pciauto setup bridge
5150 The P2P bridge bus numbers programmed into the device are relative to
5155 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
5157 Date: Wed Jul 11 14:52:01 2007 -0500
5159 Support PCIe extended config registers
5161 FSL PCIe block has extended cfg registers in the 100 and 400 range.
5162 For example, to read the LTSSM register: pci display <busn>.0 404 1
5166 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
5168 Date: Wed Jul 11 14:51:48 2007 -0500
5170 Minor improvements to drivers/pci_auto.c
5172 - Make pciauto_{pre,post}scan_setup_bridge non-static
5173 - Added physical address display in debug messages.
5177 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
5179 Date: Wed Jul 11 14:51:35 2007 -0500
5181 Start pci hose scan from hose->current_busno.
5183 Ensure hose->current_busno is not less than first_busno. This fixes
5184 broken board code which leaves current_busno=0 when first_busno is
5185 greater than 0 for the cases with multiple controllers.
5189 commit 3865b1fb7843a08ad49a6319a36415752276ff48
5191 Date: Wed Jul 11 12:13:53 2007 +0200
5193 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
5197 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
5199 Date: Wed Jul 11 20:11:07 2007 +0200
5201 CM1.QP1: Support for the Schindler CM1.QP1 board.
5206 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
5208 Date: Wed Jul 11 18:39:11 2007 +0200
5210 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
5211 - now the Flash ST M29W040B is supported (not tested)
5212 - fix the "led" command
5213 - fix compile error, if BUILD_DIR is used
5217 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
5219 Date: Sun Jul 8 13:44:27 2007 +0200
5221 Fix malloc problem introduced with the relocation fixup for the PPC platform
5223 The relocation fixup didn't handle the malloc pointer initialization
5224 correctly. This patch fixes this problem. Tested successfully on 4xx.
5225 The relocation fixup patches for 4xx will follow soon.
5229 commit 0dca874db62718e41253659e60f3a1de7eb418ce
5230 Author: TsiChung <tcliew@Goku.(none)>
5231 Date: Tue Jul 10 15:45:43 2007 -0500
5233 Cache update and added CFG_UNIFY_CACHE
5235 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
5237 Signed-off-by: TsiChung <tcliew@Goku.(none)>
5239 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
5241 Date: Thu Jul 5 23:36:16 2007 -0500
5243 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
5245 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
5249 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
5251 Date: Thu Jul 5 23:31:25 2007 -0500
5255 Include immap.h and renamed mcfrtc.h to rtc.h
5259 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
5261 Date: Thu Jul 5 23:29:21 2007 -0500
5263 Add mcffec_initialize()
5265 Added mcffec_initialize() in eth_initialize()
5269 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
5271 Date: Thu Jul 5 23:27:40 2007 -0500
5273 Update header file and clean up
5279 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
5281 Date: Thu Jul 5 23:23:15 2007 -0500
5283 New uart structure and defines
5285 Seperated from mcfuart.h
5289 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
5291 Date: Thu Jul 5 23:22:31 2007 -0500
5293 New timer structure and defines
5295 Seperated from mcftimer.h
5299 commit e04acb2eba4782489417240eff76e20e176aec10
5301 Date: Thu Jul 5 23:21:09 2007 -0500
5303 Rename mcfrtc to rtc
5305 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
5309 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
5311 Date: Thu Jul 5 23:17:36 2007 -0500
5313 Rename mcfserial.c. Update include header
5315 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
5319 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
5321 Date: Thu Jul 5 23:13:58 2007 -0500
5323 Header file update, clean up and cache handling
5325 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
5329 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
5331 Date: Thu Jul 5 23:10:40 2007 -0500
5333 Create interrupts.c and modify Makefile
5335 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
5339 commit ddd104f1ed655eda50c06ba636237a83ed943f34
5341 Date: Thu Jul 5 23:06:55 2007 -0500
5347 commit b9bf3de377b2bae70c983c9b97feae914999e735
5349 Date: Thu Jul 5 23:05:31 2007 -0500
5351 Update header file and some clean up
5353 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
5357 commit 84a015b52ec820a5ae173717d78516de731c89c2
5359 Date: Thu Jul 5 23:03:28 2007 -0500
5361 Update header file and enable icache
5363 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
5367 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
5369 Date: Thu Jul 5 23:01:22 2007 -0500
5371 Update header file and removed interrupt_init()
5373 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
5377 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
5379 Date: Thu Jul 5 22:57:46 2007 -0500
5381 Update for flash.o and mii.o
5383 Removed flash.o and added mii.o
5387 commit c5ded275d839e4ff79f41718d50a835d989f57bc
5389 Date: Thu Jul 5 22:56:19 2007 -0500
5391 MII functions calls.
5395 commit 427c814104560e29bda14955c67703245aaaa5b4
5397 Date: Thu Jul 5 22:54:42 2007 -0500
5399 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
5401 The removed MII routines will be placed in mii.c.
5405 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
5407 Date: Thu Jul 5 22:51:05 2007 -0500
5411 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
5415 commit 2744354a8437b8f78db178e30660215688bff570
5417 Date: Thu Jul 5 22:46:38 2007 -0500
5419 Seperate old structure defines and new structure defines
5421 Removed new uart structure and defines to uart.h
5425 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
5427 Date: Thu Jul 5 22:45:01 2007 -0500
5429 Seperate old structure defines and new structure defines
5431 New timer structure and defines will move to new timer.h
5435 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
5437 Date: Thu Jul 5 22:42:23 2007 -0500
5445 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
5447 Date: Thu Jul 5 22:41:24 2007 -0500
5451 Replaced whitespace with tabs
5455 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
5457 Date: Thu Jul 5 22:39:07 2007 -0500
5459 Create new header file and move peripherals base address from configs file to new header file.
5461 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
5465 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
5467 Date: Thu Jul 5 22:24:58 2007 -0500
5471 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
5475 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
5477 Date: Tue Jul 10 11:19:50 2007 -0500
5479 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
5481 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
5482 Those always evaluated TRUE, and thus were always compiled
5483 even when IDE really wasn't defined/wanted.
5487 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
5489 Date: Tue Jul 10 11:13:21 2007 -0500
5491 drivers/: Remove lingering references to CFG_CMD_* symbols.
5493 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
5494 Those always evaluated TRUE, and thus were always compiled
5495 even when IDE really wasn't defined/wanted.
5499 commit f40a7f3e3888b42a43674b099e5470022c8c544c
5501 Date: Tue Jul 10 11:07:56 2007 -0500
5503 fs/: Remove lingering references to CFG_CMD_* symbols.
5505 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
5506 Those always evaluated TRUE, and thus were always compiled
5507 even when IDE really wasn't defined/wanted.
5511 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
5513 Date: Tue Jul 10 11:05:02 2007 -0500
5515 net/: Remove lingering references to CFG_CMD_* symbols.
5517 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
5518 Those always evaluated TRUE, and thus were always compiled
5519 even when IDE really wasn't defined/wanted.
5523 commit 902531788376046da212afd1661cffb62f3daa1c
5525 Date: Tue Jul 10 11:02:44 2007 -0500
5527 common/: Remove lingering references to CFG_CMD_* symbols.
5529 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
5530 Those always evaluated TRUE, and thus were always compiled
5531 even when IDE really wasn't defined/wanted.
5535 commit d39b57415838c73fb0a37eca84de3c68ba990586
5537 Date: Tue Jul 10 10:48:22 2007 -0500
5539 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
5541 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
5542 Those always evaluated TRUE, and thus were always compiled
5543 even when IDE really wasn't defined/wanted.
5547 commit 77a318545d57aefa844752465b94c7e09a3f26d0
5549 Date: Tue Jul 10 10:39:10 2007 -0500
5551 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
5553 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
5554 Those always evaluated TRUE, and thus were always compiled
5555 even when IDE really wasn't defined/wanted.
5559 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
5561 Date: Tue Jul 10 10:27:39 2007 -0500
5563 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
5567 commit 079a136c3588814784561d6e4856970ee82d6e2a
5569 Date: Tue Jul 10 10:12:10 2007 -0500
5571 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
5573 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
5574 used to be included but CONFIG_BOOTP_MASK was not defined.
5576 Remove lingering references to CFG_CMD_* symbols.
5580 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
5582 Date: Tue Jul 10 09:38:02 2007 -0500
5584 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
5586 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
5587 used to be included but CONFIG_BOOTP_MASK was not defined.
5589 Remove lingering references to CFG_CMD_* symbols.
5593 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
5595 Date: Tue Jul 10 09:29:01 2007 -0500
5597 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
5599 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
5600 used to be included but CONFIG_BOOTP_MASK was not defined.
5602 Remove lingering references to CFG_CMD_* symbols.
5606 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
5608 Date: Tue Jul 10 09:22:23 2007 -0500
5610 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
5612 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
5613 used to be included but CONFIG_BOOTP_MASK was not defined.
5615 Remove lingering references to CFG_CMD_* symbols.
5619 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
5621 Date: Tue Jul 10 09:10:49 2007 -0500
5623 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
5625 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
5626 used to be included but CONFIG_BOOTP_MASK was not defined.
5628 Remove lingering references to CFG_CMD_* symbols.
5632 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
5634 Date: Tue Jul 10 09:02:57 2007 -0500
5636 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
5638 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
5639 used to be included but CONFIG_BOOTP_MASK was not defined.
5641 Remove lingering references to CFG_CMD_* symbols.
5645 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
5647 Date: Mon Jul 9 22:08:34 2007 -0500
5649 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
5651 All of the choices for CONFIG_BOOTP_ are now documented in
5652 the README file. You must now individually select exactly
5653 the set that you want using a series of
5654 #define CONFIG_BOOTP_<x>
5655 statements in the board port config files now.
5659 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
5661 Date: Mon Jul 9 21:57:31 2007 -0500
5663 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
5667 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
5669 Date: Mon Jul 9 21:48:26 2007 -0500
5671 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
5675 commit 37d4bb70586659dedef1658ce1bed071be098aec
5677 Date: Mon Jul 9 21:38:02 2007 -0500
5679 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
5683 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
5685 Date: Mon Jul 9 21:31:24 2007 -0500
5687 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
5691 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
5693 Date: Mon Jul 9 21:24:19 2007 -0500
5695 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
5699 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
5701 Date: Mon Jul 9 21:16:53 2007 -0500
5703 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
5707 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
5709 Date: Mon Jul 9 19:12:30 2007 -0500
5711 Retire CONFIG_COMMANDS finally.
5712 Strip old CFG_CMD_* symbols out.
5716 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
5718 Date: Mon Jul 9 19:10:03 2007 -0500
5720 Update README.* to reference new CONFIG_CMD_* names now.
5724 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
5726 Date: Mon Jul 9 19:06:00 2007 -0500
5728 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
5732 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
5734 Date: Mon Jul 9 18:57:22 2007 -0500
5736 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
5740 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
5742 Date: Mon Jul 9 18:45:16 2007 -0500
5744 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
5748 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
5750 Date: Mon Jul 9 18:38:39 2007 -0500
5752 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
5756 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
5758 Date: Mon Jul 9 18:31:28 2007 -0500
5760 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
5764 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
5766 Date: Mon Jul 9 18:24:55 2007 -0500
5768 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
5772 commit fcec2eb93e126400009729328e797f12bc94f1fd
5774 Date: Mon Jul 9 18:19:09 2007 -0500
5776 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
5780 commit a593814f2be0c9cdc3133cd550b167b8a988328f
5782 Date: Mon Jul 9 18:10:50 2007 -0500
5784 rtc/: Remove obsolete references to CONFIG_COMMANDS
5788 commit 67350568f9d46e66c21829f3513b3db0caeb948b
5790 Date: Mon Jul 9 18:05:38 2007 -0500
5792 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
5796 commit 7def6b34f910f08d7ef0a14646da067719237ca2
5798 Date: Mon Jul 9 18:02:11 2007 -0500
5800 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
5804 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
5806 Date: Mon Jul 9 17:56:50 2007 -0500
5808 fs/: Remove obsolete references to CONFIG_COMMANDS
5812 commit c91898bbc505aff3e12a807af88e76da18efb7ee
5814 Date: Mon Jul 9 17:46:09 2007 -0500
5816 tools/: Remove obsolete references to CONFIG_COMMANDS
5820 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
5822 Date: Mon Jul 9 17:45:14 2007 -0500
5824 net/: Remove obsolete references to CONFIG_COMMANDS
5828 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
5830 Date: Mon Jul 9 17:39:42 2007 -0500
5832 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
5836 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
5838 Date: Mon Jul 9 17:30:01 2007 -0500
5840 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
5844 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
5846 Date: Mon Jul 9 17:22:37 2007 -0500
5848 disk/: Remove obsolete references to CONFIG_COMMANDS
5852 commit 639221c76c88215bd55af83ad174fc30d1940f8f
5854 Date: Mon Jul 9 17:15:49 2007 -0500
5856 include/: Remove obsolete references to CONFIG_COMMANDS
5857 Mostly removed from comments here.
5861 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
5863 Date: Tue Jul 10 00:01:28 2007 +0200
5865 Coding style cleanup; update CHANGELOG.
5869 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
5871 Date: Mon Jul 9 11:00:24 2007 +0200
5873 Small coding style cleanup
5877 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
5879 Date: Mon Jul 9 10:10:08 2007 +0200
5881 Migrate esd 405EP boards to new NAND subsystem
5883 Remove unused CFG_NAND_LEGACY define
5885 These boards to not have NAND.
5889 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
5891 Date: Mon Jul 9 10:10:06 2007 +0200
5893 Migrate esd 405EP boards to new NAND subsystem
5895 Migrate esd 405EP boards to new NAND subsystem
5898 -use correct io accessors (in/out_be32())
5902 commit e09f7ab5749c345f924da272bea0521a73af5b11
5904 Date: Mon Jul 9 10:10:04 2007 +0200
5906 Migrate esd 405EP boards to new NAND subsystem
5908 This patch prepares the migration from the legacy NAND driver
5909 to U-Boot's new NAND subsystem for esd boards.
5913 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
5915 Date: Sun Jul 8 18:10:08 2007 -0500
5917 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
5921 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
5923 Date: Sun Jul 8 18:05:39 2007 -0500
5925 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
5929 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
5931 Date: Sun Jul 8 18:02:23 2007 -0500
5933 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
5937 commit baa26db4113679b80970ff447d91cc10217742a6
5939 Date: Sun Jul 8 17:51:39 2007 -0500
5941 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
5945 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
5947 Date: Sun Jul 8 17:02:01 2007 -0500
5949 Clear up confusion over the CMD_POST and POST_DIAG mess.
5951 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
5952 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
5953 Clear this mess up some.
5957 commit b3631487105a57ab7cbadfc26efbaf9676275018
5959 Date: Sun Jul 8 15:45:08 2007 -0500
5961 Remove references to the old cmd_confdefs.h include file.
5965 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
5967 Date: Sun Jul 8 15:42:59 2007 -0500
5969 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
5971 Use new CONFIG_CMD_* in lwmon5.h board config file.
5972 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
5976 commit a5562901661bd428f7e5feb333f796372cb81019
5978 Date: Sun Jul 8 15:31:57 2007 -0500
5980 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
5984 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
5986 Date: Sun Jul 8 15:02:44 2007 -0500
5988 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
5992 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
5994 Date: Sun Jul 8 15:12:40 2007 -0500
5996 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
6000 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
6002 Date: Sun Jul 8 14:55:07 2007 -0500
6004 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
6008 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
6010 Date: Sun Jul 8 14:49:44 2007 -0500
6012 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
6016 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
6018 Date: Sun Jul 8 14:21:43 2007 -0500
6020 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
6024 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
6026 Date: Sun Jul 8 14:14:17 2007 -0500
6028 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
6032 commit 348f258f24253433e4a2302a0bbceb6740a67246
6034 Date: Sun Jul 8 13:46:18 2007 -0500
6036 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
6040 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
6042 Date: Sun Jul 8 10:09:35 2007 -0500
6044 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
6048 commit 60a0876b5106b34220e459c208bbf648073306c0
6050 Date: Sat Jul 7 21:04:26 2007 -0500
6052 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
6056 commit dcaa71562826a2466e894c868d132509dcda8444
6058 Date: Sat Jul 7 20:56:05 2007 -0500
6060 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
6064 commit 3c3227f3c737502311b25b72084573901cbbf17d
6066 Date: Sat Jul 7 20:40:43 2007 -0500
6068 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
6072 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
6074 Date: Thu Jul 5 19:52:35 2007 -0500
6076 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
6080 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
6082 Date: Thu Jul 5 19:32:07 2007 -0500
6084 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
6088 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
6090 Date: Thu Jul 5 19:13:52 2007 -0500
6092 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
6094 Since ADS860.h includes "board/fads/fads.h" with ramifications
6095 on the CONFIG_COMMAND treatment, it too has to be adjusted to
6096 exclude already configured commands in this same commit.
6100 commit 10e038932f22ee80ebd53de312531e70e6590a2f
6102 Date: Fri Jul 6 14:58:39 2007 +0200
6104 [NAND] Bad block skipping for command nboot
6106 The old implementation of command nboot does not support reading the image from
6107 NAND flash with skipping of bad blocks. The patch implements a new version of
6108 the nboot command: by calling nboot.jffs2 from the u-boot command line the
6109 command will load the image from NAND flash with respect to bad blocks (by using
6110 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
6116 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
6118 Date: Fri Jul 6 12:26:51 2007 +0200
6120 ppc4xx: Update lwmon5 default environment
6124 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
6126 Date: Fri Jul 6 11:48:24 2007 +0200
6128 ppc4xx: Update lwmon5 board
6130 Add unlock=yes environment variable to default variables to unlock
6131 the CFI flash by default.
6135 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
6137 Date: Fri Jul 6 09:45:47 2007 +0200
6139 Fix problem with get/setdcr commands introduced by cfg patches
6143 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
6145 Date: Fri Jul 6 02:50:19 2007 +0200
6147 Code cleanup and default config update for STC GP3 SSA board.
6151 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
6153 Date: Thu Jul 5 17:56:27 2007 +0200
6155 Fixing some typos etc. introduced mainly by cfg patches.
6159 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
6161 Date: Thu Jul 5 11:12:16 2007 +0200
6163 Minor coding style cleanup. Update CHANGELOG.
6165 commit dca3b3d6d6396b67e5e84af53452164923c73443
6167 Date: Wed Jul 4 22:33:46 2007 -0500
6169 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
6173 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
6175 Date: Wed Jul 4 22:33:38 2007 -0500
6177 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
6181 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
6183 Date: Wed Jul 4 22:33:30 2007 -0500
6185 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
6189 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
6191 Date: Wed Jul 4 22:33:23 2007 -0500
6193 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
6197 commit 26a34560d56a9df5bc2ae23525d9229736134757
6199 Date: Wed Jul 4 22:33:17 2007 -0500
6201 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
6205 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
6207 Date: Wed Jul 4 22:33:13 2007 -0500
6209 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
6213 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
6215 Date: Wed Jul 4 22:33:07 2007 -0500
6217 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
6221 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
6223 Date: Wed Jul 4 22:33:01 2007 -0500
6225 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
6229 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
6231 Date: Wed Jul 4 22:32:57 2007 -0500
6233 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
6237 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
6239 Date: Wed Jul 4 22:32:51 2007 -0500
6241 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
6245 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
6247 Date: Wed Jul 4 22:32:32 2007 -0500
6249 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
6253 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
6255 Date: Wed Jul 4 22:32:25 2007 -0500
6257 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
6261 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
6263 Date: Wed Jul 4 22:32:19 2007 -0500
6265 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
6269 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
6271 Date: Wed Jul 4 22:32:10 2007 -0500
6273 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
6277 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
6279 Date: Wed Jul 4 22:32:03 2007 -0500
6281 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
6285 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
6287 Date: Wed Jul 4 22:31:56 2007 -0500
6289 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
6293 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
6295 Date: Wed Jul 4 22:31:49 2007 -0500
6297 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
6301 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
6303 Date: Wed Jul 4 22:31:42 2007 -0500
6305 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
6309 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
6311 Date: Wed Jul 4 22:31:35 2007 -0500
6313 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
6317 commit d794cfefead5fc177cf4f41164e80382e9c9484a
6319 Date: Wed Jul 4 22:31:15 2007 -0500
6321 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
6325 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
6327 Date: Wed Jul 4 22:31:07 2007 -0500
6329 include/configs: Use new CONFIG_CMD_* in STx board config files.
6333 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
6335 Date: Wed Jul 4 22:30:58 2007 -0500
6337 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
6341 commit 2694690e285acaa34922f55f4b5ae030da60c55a
6343 Date: Wed Jul 4 22:30:50 2007 -0500
6345 include/configs: Use new CONFIG_CMD_* in TQM board config files.
6349 commit 1cc4c458329765b58e584a19821e796b3c10e976
6351 Date: Wed Jul 4 22:30:28 2007 -0500
6353 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
6357 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
6359 Date: Wed Jul 4 22:30:06 2007 -0500
6361 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
6365 commit b44896215a09c60fa40cae906f7ed207bbc2c492
6367 Date: Thu Jul 5 08:17:37 2007 +0200
6369 Merged POST framework with the current TOT.
6373 commit b24629fa377214d63bb40d1360e354b6d3e4af56
6375 Date: Wed Jun 13 13:23:15 2007 -0500
6377 mpc86xx: Remove old CFG_CMD_* references.
6381 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
6383 Date: Wed Jun 13 13:22:54 2007 -0500
6385 Add MPC8568MDS to MAKEALL 85xx target.
6387 It was missing from the original port submission.
6391 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
6393 Date: Wed Jun 13 13:22:08 2007 -0500
6395 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
6399 commit 56b304ac2091689506088a9ae67f63fd6300cf16
6401 Date: Wed Jun 13 13:21:37 2007 -0500
6403 Fix #if typo in CONFIG_CMD_* changes.
6407 commit f780b83316d9af1f61d71cc88b1917b387b9b995
6409 Date: Wed Jun 27 18:11:38 2007 +0200
6411 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
6415 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
6417 Date: Wed Jul 4 10:06:30 2007 +0200
6419 ppc4xx: Update lwmon5 board
6421 - Add optional ECC generation routine to preserve existing
6422 RAM values. This is needed for the Linux log-buffer support
6423 - Add optional DDR2 setup with CL=4
6424 - GPIO50 not used anymore
6425 - Lime register setup added
6429 commit 6810a34677dbc446334f5e451f1682426dd33b49
6431 Date: Tue Jul 3 00:17:28 2007 -0600
6433 Fix Makefile to use $(MKCONFIG) macro for all board ports
6437 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
6439 Date: Tue Jul 3 00:17:28 2007 -0600
6441 Fix Makefile to use $(MKCONFIG) macro for all board ports
6445 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
6447 Date: Tue Jul 3 00:34:49 2007 -0600
6449 Correct fixup relocation for mpc83xx
6453 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
6455 Date: Tue Jul 3 00:34:44 2007 -0600
6457 Correct fixup relocation for mpc8260
6461 commit f3a52fe05923935db86985daf9438e2f70ac39aa
6463 Date: Tue Jul 3 00:34:39 2007 -0600
6465 Correct fixup relocation for mpc824x
6469 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
6471 Date: Tue Jul 3 00:34:34 2007 -0600
6473 Correct fixup relocation for mpc8220
6477 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
6479 Date: Tue Jul 3 00:34:29 2007 -0600
6481 Correct fixup relocation for MPC5xxx
6485 commit 3649cd99ba815b6601868735765602f00ef3692b
6487 Date: Tue Jul 3 00:34:24 2007 -0600
6489 Correct relocation fixup for mpc5xx
6493 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
6495 Date: Tue Jul 3 00:34:19 2007 -0600
6497 Don't set gd->reloc_off if relocation of .fixup works correctly
6501 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
6503 Date: Tue Jul 3 00:34:14 2007 -0600
6505 Remove obsolete mpc83xx linker scripts
6509 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
6511 Date: Tue Jul 3 00:34:09 2007 -0600
6513 Consolidate mpc8260 linker scripts
6517 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
6519 Date: Tue Jul 3 00:34:04 2007 -0600
6521 Remove obsolete mpc824x linker scripts
6525 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
6527 Date: Tue Jul 3 00:33:59 2007 -0600
6529 Remove obsolete mpc824x linker scripts (3 of 4)
6533 commit a71c084f3ac7fedf144537db2b2da47323068833
6535 Date: Tue Jul 3 00:33:53 2007 -0600
6537 Remove obsolete mpc824x linker scripts (2 of 4)
6541 commit f670a15468d1365241d40022b9408e1004181f5e
6543 Date: Tue Jul 3 00:33:48 2007 -0600
6545 Remove obsolete mpc824x linker scripts (1 of 4)
6549 commit 09555bd45a04c0e54f172528d21bc18896550d28
6551 Date: Tue Jul 3 00:33:43 2007 -0600
6553 Remove obsolete mpc8220 linker scripts
6557 commit 5efb992f046e51225c93d52f80fecbe433abd789
6559 Date: Tue Jul 3 00:33:38 2007 -0600
6561 Remove obsolete mpc5xxx linker scripts (3 of 3)
6565 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
6567 Date: Tue Jul 3 00:33:33 2007 -0600
6569 Remove obsolete mpc5xxx linker scripts (2 of 3)
6573 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
6575 Date: Tue Jul 3 00:33:28 2007 -0600
6577 Remove obsolete mpc5xxx linker scripts (1 of 3)
6581 commit b7d8e05f8675249b5f208aa73babeed384a4519d
6583 Date: Tue Jul 3 00:33:23 2007 -0600
6585 Remove obsolete mpc5xx linker scripts
6589 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
6591 Date: Tue Jul 3 00:33:18 2007 -0600
6593 Consolidate mpc83xx linker scripts
6597 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
6599 Date: Tue Jul 3 00:33:13 2007 -0600
6601 Consolidate mpc8260 linker scripts
6605 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
6607 Date: Tue Jul 3 00:33:08 2007 -0600
6609 Consolidate mpc824x linker scripts
6613 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
6615 Date: Tue Jul 3 00:33:03 2007 -0600
6617 Consolidate mpc8220 linker scripts
6621 commit d181c9a15cd41863fe24840d17848429f27d3c8c
6623 Date: Tue Jul 3 00:32:58 2007 -0600
6625 Consolidate mpc5xxx linker scripts
6629 commit 287ac924adb7291bebe5086652a362a30ab28b13
6631 Date: Tue Jul 3 00:32:53 2007 -0600
6633 Consolidate mpc5xx linker scripts
6637 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
6639 Date: Wed Jul 4 00:43:53 2007 +0200
6641 Fix a few file permission problems.
6645 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
6647 Date: Wed Jul 4 00:38:38 2007 +0200
6649 Minor coding style cleanup. Rebuild CHANGELOG file.
6651 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
6653 Date: Mon Jun 11 19:03:44 2007 -0500
6655 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
6659 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
6661 Date: Mon Jun 11 19:03:39 2007 -0500
6663 README: Rewrite command line config to use CONFIG_CMD_* names.
6667 commit 72a074cec68e5bad60d63206c050974e08afd804
6669 Date: Mon Jun 11 19:03:34 2007 -0500
6671 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6673 This is a compatibility step that allows both the older form
6674 and the new form to co-exist for a while until the older can
6675 be removed entirely.
6677 All transformations are of the form:
6679 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6681 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6685 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
6687 Date: Mon Jun 11 19:03:28 2007 -0500
6689 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6691 This is a compatibility step that allows both the older form
6692 and the new form to co-exist for a while until the older can
6693 be removed entirely.
6695 All transformations are of the form:
6697 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6699 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6703 commit 9107ebe0d352420895ab69b715697bdebc8caf50
6705 Date: Mon Jun 11 19:03:23 2007 -0500
6707 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6709 This is a compatibility step that allows both the older form
6710 and the new form to co-exist for a while until the older can
6711 be removed entirely.
6713 All transformations are of the form:
6715 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6717 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6721 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
6723 Date: Mon Jun 11 19:03:19 2007 -0500
6725 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6727 This is a compatibility step that allows both the older form
6728 and the new form to co-exist for a while until the older can
6729 be removed entirely.
6731 All transformations are of the form:
6733 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6735 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6739 commit 737184114ec9c9e0ab94d6713536126073bd2472
6741 Date: Mon Jun 11 19:03:15 2007 -0500
6743 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6745 This is a compatibility step that allows both the older form
6746 and the new form to co-exist for a while until the older can
6747 be removed entirely.
6749 All transformations are of the form:
6751 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6753 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6757 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
6759 Date: Mon Jun 11 19:03:08 2007 -0500
6761 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6763 This is a compatibility step that allows both the older form
6764 and the new form to co-exist for a while until the older can
6765 be removed entirely.
6767 All transformations are of the form:
6769 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6771 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6775 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
6777 Date: Mon Jun 11 19:03:03 2007 -0500
6779 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6781 This is a compatibility step that allows both the older form
6782 and the new form to co-exist for a while until the older can
6783 be removed entirely.
6785 All transformations are of the form:
6787 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6789 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6793 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
6795 Date: Mon Jun 11 19:02:58 2007 -0500
6797 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6799 This is a compatibility step that allows both the older form
6800 and the new form to co-exist for a while until the older can
6801 be removed entirely.
6803 All transformations are of the form:
6805 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6807 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6811 commit 98b79003c21c2578206003256de4e781d6b36ca8
6813 Date: Mon Jun 11 19:02:53 2007 -0500
6815 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6817 This is a compatibility step that allows both the older form
6818 and the new form to co-exist for a while until the older can
6819 be removed entirely.
6821 All transformations are of the form:
6823 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6825 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6829 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
6831 Date: Mon Jun 11 19:02:49 2007 -0500
6833 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6835 This is a compatibility step that allows both the older form
6836 and the new form to co-exist for a while until the older can
6837 be removed entirely.
6839 All transformations are of the form:
6841 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6843 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6847 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
6849 Date: Mon Jun 11 19:02:34 2007 -0500
6851 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6853 This is a compatibility step that allows both the older form
6854 and the new form to co-exist for a while until the older can
6855 be removed entirely.
6857 All transformations are of the form:
6859 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6861 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6865 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
6867 Date: Mon Jun 11 19:02:20 2007 -0500
6869 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6871 This is a compatibility step that allows both the older form
6872 and the new form to co-exist for a while until the older can
6873 be removed entirely.
6875 All transformations are of the form:
6877 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6879 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6883 commit d5be43de93ff905c465e509d45a3164ef48d26e7
6885 Date: Mon Jun 11 19:02:10 2007 -0500
6887 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6889 This is a compatibility step that allows both the older form
6890 and the new form to co-exist for a while until the older can
6891 be removed entirely.
6893 All transformations are of the form:
6895 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6897 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6901 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
6903 Date: Mon Jun 11 19:02:05 2007 -0500
6905 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6907 This is a compatibility step that allows both the older form
6908 and the new form to co-exist for a while until the older can
6909 be removed entirely.
6911 All transformations are of the form:
6913 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6915 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6919 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
6921 Date: Mon Jun 11 19:01:54 2007 -0500
6923 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6925 This is a compatibility step that allows both the older form
6926 and the new form to co-exist for a while until the older can
6927 be removed entirely.
6929 All transformations are of the form:
6931 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6933 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6937 commit a76adc8142c1d956385a109e0b70f9319ede4d66
6939 Date: Mon Jun 11 19:01:43 2007 -0500
6941 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6943 This is a compatibility step that allows both the older form
6944 and the new form to co-exist for a while until the older can
6945 be removed entirely.
6947 All transformations are of the form:
6949 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6951 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6955 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
6957 Date: Mon Jun 11 19:01:34 2007 -0500
6959 Introduce initial versions of new Command Config files.
6961 Derive three new files from cmd_confdefs.h:
6962 config_bootp.h - Has BOOTP related config options, not commands
6963 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
6964 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
6966 For now, include "config_bootp.h" for compatability until all
6967 users of it directly include it properly.
6971 commit 1f2a05898658900dc5717761e27abf2052e67e13
6973 Date: Sat Jun 30 18:50:48 2007 +0200
6979 commit a5d71e290f3673269be8eefb4ec44f53412f9461
6981 Date: Mon Jun 25 19:11:37 2007 +0200
6983 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
6987 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
6989 Date: Mon Jun 25 17:03:13 2007 +0200
6991 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
6993 This patch prints the DDR status registers upon machine check
6994 interrupt on the 440EPx/GRx. This can be useful especially when
6995 ECC support is enabled.
6997 I added some small changes to the original patch from Niklaus to
6998 make it compile clean.
7003 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
7005 Date: Mon Jun 25 16:50:55 2007 +0200
7007 ppc4xx: Fix O=buildir builds
7009 This patch fixes the problem to assemble cpu/ppc4xx/start.S
7010 experienced last week where building failed having specified
7015 commit 466fff1a7bb5fe764a06450626f6098219f446b8
7017 Date: Mon Jun 25 15:57:39 2007 +0200
7019 ppc4xx: Add pci_pre_init() for 405 boards
7021 This patch removes the CFG_PCI_PRE_INIT option completely, since
7022 it's not needed anymore with the patch from Matthias Fuchs with
7023 the "weak" pci_pre_init() implementation.
7027 commit 6f35c53166213c24a5a0e2390ed861136ff73870
7029 Date: Sun Jun 24 17:41:21 2007 +0200
7031 ppc4xx: Maintenance patch for esd's CPCI405 derivats
7033 -add pci_pre_init() for pci interrupt fixup code
7034 -disable phy sleep mode via reset_phy() function
7035 -use correct io accessors
7040 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
7042 Date: Sun Jun 24 17:23:41 2007 +0200
7044 ppc4xx: Add pci_pre_init() for 405 boards
7046 This patch adds support for calling a plattform dependant
7047 pci_pre_init() function for 405 boards. This can be used to
7048 move the current pci_405gp_fixup_irq() function into the
7051 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
7052 A default function with 'weak' attribute is used when
7053 a board specific pci_pre_init() is not implemented.
7057 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
7059 Date: Fri Jun 22 23:59:00 2007 +0200
7061 Coding stylke cleanup; rebuild CHANGELOG
7063 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
7065 Date: Wed Apr 18 14:55:19 2007 +0400
7067 Adapt log buffer code to support Linux 2.6
7069 A new environment variable, "logversion", selects the log buffer
7070 behaviour. If it is not set or set to a value other than 2, then the
7071 old, Linux 2.4.4, behaviour is selected.
7076 commit a11e06965ec91270c51853407ff1261d3c740386
7078 Date: Wed Mar 28 19:06:19 2007 +0400
7080 Extend POST support for PPC440
7082 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
7087 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
7089 Date: Fri Jun 22 19:11:54 2007 +0200
7091 [PCS440EP] upgrade the PCS440EP board:
7092 - Show on the Status LEDs, some States of the board.
7093 - Get the MAC addresses from the EEProm
7095 - use the CF on the board.
7096 - check the U-Boot image in the Flash with a SHA1
7098 - use dynamic TLB entries generation for the SDRAM
7102 commit 3a1f5c81b0b9557817a789bece839905581c2205
7104 Date: Fri Jun 22 16:58:40 2007 +0200
7106 ppc4xx: Fix problem with extended program_tlb() funtion
7108 The recently extended program_tlb() function had a problem when
7109 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
7110 virtual address was not incremented. This patch fixes this issue
7111 and is tested on Katmai with 512MB SDRAM.
7115 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
7117 Date: Fri Jun 22 14:58:04 2007 +0200
7119 [ppc] Fix build breakage for all non-4xx PowerPC variants.
7121 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
7124 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
7126 Date: Fri Jun 22 10:34:12 2007 +0200
7128 [patch] add nand_init() prototype to nand.h
7130 since nand_init() is expected to be called by other parts of u-boot, there
7131 should be a prototype for it in nand.h
7136 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
7138 Date: Wed Jun 20 18:14:24 2007 +0200
7140 Coding style cleanup. Refresh CHANGELOG.
7142 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
7144 Date: Tue Jun 19 17:22:44 2007 +0200
7146 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
7148 This patch adds a board command to configure the I2C bootstrap EEPROM
7149 values. Right now 533 and 667MHz are supported for booting either via NOR
7150 or NAND FLASH. Here the usage:
7152 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
7153 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
7157 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
7159 Date: Tue Jun 19 16:42:31 2007 +0200
7161 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
7163 The latest changes showed a problem with the location of the NAND-SPL
7164 image in the OCM and the init-data area (incl. cache). This patch
7169 commit 86ba99e34194394052d24c04dc40d1263d29a26f
7171 Date: Tue Jun 19 16:40:58 2007 +0200
7173 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
7177 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
7179 Date: Mon Jun 18 13:50:13 2007 -0500
7181 Added M5329AFEE and M5329BFEE Platforms
7183 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
7184 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
7185 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
7188 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
7189 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
7190 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
7191 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
7192 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
7193 lib_m68k/time.c, net/eth.c and rtc/Makefile
7197 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
7199 Date: Sun Jun 17 19:04:11 2007 +0200
7201 [fix] email reparation
7203 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
7205 Date: Sun Jun 17 19:03:21 2007 +0200
7207 [FIX] fix microblaze file permitission
7209 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
7211 Date: Fri Jun 15 11:33:41 2007 +0200
7213 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
7215 Now CONFIG_440 has to be defined in all PPC440 board config files.
7219 commit efa35cf12d914d4caba942acd5a6c45f217de302
7221 Date: Fri Jun 15 11:19:28 2007 +0200
7223 ppc4xx: Clean up 440 exceptions handling
7225 - Introduced dedicated switches for building 440 and 405 images required
7226 for 440-specific machine instructions like 'rfmci' etc.
7228 - Exception vectors moved to the proper location (_start moved away from
7229 the critical exception handler space, which it occupied)
7231 - CriticalInput now serviced (with default handler)
7233 - MachineCheck properly serviced (added a dedicated handler and return
7236 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
7237 unhandled and those not relevant for 4xx were eliminated)
7239 - Eliminated Linux leftovers, removed dead code
7245 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
7247 Date: Fri Jun 15 08:18:01 2007 +0200
7249 [ppc4xx] Add initial lwmon5 board support
7251 This patch adds initial support for the Liebherr lwmon5 board euqipped
7252 with an AMCC 440EPx PowerPC.
7256 commit 85f737376d5ff3d5f0d45a8b657686326d175307
7258 Date: Fri Jun 15 07:39:43 2007 +0200
7260 [ppc4xx] Extend 44x GPIO setup with default output state
7262 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
7263 is extended with the default GPIO output state (level).
7267 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
7269 Date: Thu Jun 14 11:14:32 2007 +0200
7271 [ppc4xx] Extend program_tlb() with virtual & physical addresses
7273 Now program_tlb() allows to program a TLB (or multiple) with
7274 different virtual and physical addresses. With this change, now one
7275 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
7276 diabled and once with caches enabled.
7280 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
7282 Date: Wed May 23 19:02:41 2007 +0200
7284 Change 'repeatable' attribute of some commands to sensible values.
7286 Most prominently this changes 'erase' to be non-repeatable.
7290 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
7292 Date: Wed May 23 18:47:48 2007 +0200
7294 Fix 'run' not to continue after interrupted command
7298 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
7300 Date: Mon Jun 11 15:14:24 2007 +0200
7302 USB: This patch fix readl in ohci swap reg access.
7306 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
7308 Date: Fri Jun 8 14:52:22 2007 +0200
7310 TQM5200: Add Flat Device Tree support, update default env. accordingly.
7315 commit 9045f33c023f698660a2e45d1b2194c0711abebc
7317 Date: Fri Jun 8 10:24:58 2007 +0200
7319 Fix config problems on SC3 board; make ide_reset_timeout work.
7321 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
7323 Date: Fri Jun 8 09:55:24 2007 +0200
7325 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
7327 Set the correct value in GPIOx_TCR when configuring the gpio
7328 with CFG_440_GPIO_TABLE.
7333 commit f539edc076cfe52bff919dd512ba8d7af0e22092
7335 Date: Thu May 24 15:52:25 2007 -0700
7337 cosmetic changes to bcm570x driver
7339 This is a cosmetic only changes submission.
7340 It affects files relevant to bcm570x driver.
7341 the commands used to generate this change was
7344 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
7346 The BMW target (the only one using this chip so far) builds cleanly, the
7347 `before and after' generated object files for drivers/bcm570x.c and
7348 drivers/tigon3.o are identical as reported by objdump -d
7353 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
7355 Date: Wed Jun 6 16:26:56 2007 +0200
7357 Coding Style cleanup; generate new CHANGELOG file.
7361 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
7363 Date: Wed Jun 6 11:49:44 2007 +0200
7365 TRAB, USB: update trab board configuration for use of generic ohci driver
7367 commit dace45acd1c1357daa9322099d07c9a9e08b0024
7369 Date: Wed Jun 6 11:49:43 2007 +0200
7371 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
7373 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
7375 Date: Wed Jun 6 11:49:43 2007 +0200
7377 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
7379 commit fc43be478f2aa37ce38acd85355038866e4162af
7381 Date: Wed Jun 6 11:49:35 2007 +0200
7383 USB/OHCI: endianness cleanup in the generic ohci driver
7385 commit c440bfe6d6d92d66478a7e84402b31f48413617b
7387 Date: Wed Jun 6 11:42:13 2007 +0200
7389 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
7391 This patch adds NAND booting support for the AMCC Acadia eval board.
7393 Please make sure to configure jumper J7 to position 2-3 when booting
7394 from NOR, and to position 1-2 when booting for NAND.
7396 I also added a board command to configure the I2C bootstrap EEPROM
7397 values. Right now only 267MHz is support for booting either via NOR
7398 or NAND FLASH. Here the usage:
7400 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
7401 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
7405 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
7407 Date: Wed Jun 6 10:08:14 2007 +0200
7409 Files include/linux/byteorder/{big,little}_endian.h define
7410 __BIG_ENDIAN and __LITTLE_ENDIAN.
7414 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
7416 Date: Wed Jun 6 10:08:14 2007 +0200
7418 Add USB PCI-OHCI, USB keyboard and event poll support to the
7419 MPC8641HPCN board config file.
7423 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
7425 Date: Wed Jun 6 10:08:14 2007 +0200
7427 USB PCI-OHCI, interrupt pipe and usb event poll support
7429 This patch added USB PCI-OHCI chips support, interrupt pipe support
7430 and usb event poll support. For supporting the USB interrupt pipe, the
7431 globe urb_priv is moved to purb in ed struct. Now, we can process
7432 several urbs at one time. The interrupt pipe support codes are ported
7433 from Linux kernel 2.4.
7437 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
7439 Date: Wed Jun 6 10:08:13 2007 +0200
7441 USB event poll support
7443 This patch adds USB event poll support, which could be used in usbkbd
7444 and other usb devices driver when the asynchronous interrupt
7445 processing is supported.
7449 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
7451 Date: Wed Jun 6 10:08:12 2007 +0200
7453 ISP116x: delay for crappy USB keys
7455 Using some (very) slow USB keys cause the USB host controller buffers
7456 are not ready to be read by the CPU so we need an extra delay before
7457 reading the USB storage data.
7461 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
7463 Date: Wed Jun 6 10:08:12 2007 +0200
7465 Change duplicate usb_cpu_init_fail to usb_board_init_fail
7472 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
7474 Date: Tue Jun 5 12:30:52 2007 -0500
7476 mpc8641 image size cleanup
7478 e600 does not have a bootpg restriction.
7479 Move the version string to beginning of image at fff00000.
7480 Resetvec.S is not needed.
7481 Update flash copy instructions.
7482 Add tftpflash env variable
7487 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
7489 Date: Mon Jun 4 08:36:05 2007 +0200
7491 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
7493 The attached patch is mainly cosmetic, allowing u-boot to
7494 display the correct bootstrap option letter according to the
7497 The original patch was extended with 405EZ support by Stefan
7503 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
7505 Date: Wed May 23 12:45:19 2007 +0400
7507 fix compilation problem for mpc8349itx CFG_RAMBOOT
7509 Current include/configs/MPC8349ITX.h does contain some support for building
7510 image that will be started from memory (without putting in into flash).
7511 It could be triggered by building with TEXT_BASE set to a low value.
7513 However, this support is incomplete: using of low TEXT_BASE causes
7514 defining configuration macros in inconsistent way, which later leads
7515 to compilation errors. In particular. flash support is being disabled,
7516 but then flash structures get referenced.
7518 This patch fixes this, making it possible to build with low TEXT_BASE.
7524 commit 8a364f0970de49949d635e60accf463c6443ef8c
7526 Date: Wed May 23 12:45:25 2007 +0400
7528 add missing 'console' var to default mpc8349itx config
7532 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
7534 Date: Fri Jun 1 16:18:17 2007 +0200
7536 ppc4xx: Add missing file for Bamboo NAND booting support
7540 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
7542 Date: Fri Jun 1 15:58:19 2007 +0200
7544 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
7546 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
7547 suggested by AMCC it is not recommended to dynamically change the EBC
7548 speed after bootup. So we undo this change to be on the safe side.
7552 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
7554 Date: Fri Jun 1 15:29:04 2007 +0200
7556 ppc4xx: Update Sequoia NAND booting support with ECC
7560 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
7562 Date: Fri Jun 1 15:27:11 2007 +0200
7564 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
7566 This patch adds NAND booting support for the AMCC Bamboo eval board.
7567 Since the NAND-SPL boot image is limited to 4kbytes, this version
7568 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
7569 supported, since the setup code for I2C DIMM autodetection and
7570 configuration is too big for this NAND bootloader.
7574 commit 42be56f53c8b107868e6125c8524ae84293e95a7
7576 Date: Fri Jun 1 15:23:04 2007 +0200
7578 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
7580 The U-Boot NAND booting support is now extended to support ECC
7581 upon loading of the NAND U-Boot image.
7583 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
7587 commit a471db07fbb65a841ffc9f4f112562b945230f98
7589 Date: Fri Jun 1 15:19:29 2007 +0200
7591 ppc4xx: Prepare Bamboo port for NAND booting support
7593 This patch updates the "normal" Bamboo NOR booting port, so
7594 that it is compatible with the coming soon NAND booting
7597 It also enables the 2nd NAND flash on the Bamboo.
7601 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
7603 Date: Fri Jun 1 15:16:58 2007 +0200
7605 ppc4xx: Update in_be32() functions and friends to latest Linux version
7609 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
7611 Date: Fri Jun 1 15:15:12 2007 +0200
7613 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
7615 This patch adds hardware ECC support to the NDFC driver. It also
7616 changes the register access from using the "simple" in32/out32
7617 functions to the in_be32/out_be32 functions, which make sure
7618 that the access is correctly synced. This is the only recommended
7619 access to SoC registers in the current Linux kernel.
7623 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
7625 Date: Fri Jun 1 15:12:15 2007 +0200
7627 NAND: Update nand_ecc.c to latest Linux version
7629 This patch updates the nand_ecc code to the latest Linux version.
7630 The main reason for this is the more compact code. This makes
7631 it possible to include the ECC code into the NAND bootloader
7632 image (NAND_SPL) for PPC4xx.
7636 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
7638 Date: Fri Jun 1 15:09:50 2007 +0200
7640 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
7644 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
7646 Date: Fri Jun 1 13:45:24 2007 +0200
7648 ppc4xx: Change Luan config file to support ECC
7650 With the updated 44x DDR2 driver the Luan board now supports
7651 ECC generation and checking.
7655 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
7657 Date: Fri Jun 1 13:45:00 2007 +0200
7659 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
7661 Add config option for 180 degree advance clock control as needed
7662 for the AMCC Luan eval board.
7666 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
7668 Date: Thu May 31 17:20:09 2007 +0200
7670 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
7674 commit 7049288fb1f16f1b317140226cdebd07bd416395
7676 Date: Sun May 27 17:26:46 2007 +0200
7678 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
7682 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
7684 Date: Sun May 27 17:06:36 2007 +0200
7686 Motion-PRO: Add support for redundant environment.
7688 Enable redundant environment, add a MTD partition for it; also add env.
7689 variable command for passing MTD partitions to the kernel command line.
7694 commit a26eabeec31746f06d309103690892805696e344
7696 Date: Sun May 27 17:05:11 2007 +0200
7698 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
7700 Allow passing longer command line to the kernel - useful especially
7701 for passing MTD partition layout.
7706 commit 9160b96f71483a116de81c68985e8ee306d36764
7708 Date: Sun May 27 17:04:18 2007 +0200
7710 Fix: Add missing NULL termination in strings expanded by macros parser.
7715 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
7717 Date: Sun May 27 17:03:37 2007 +0200
7719 Motion-PRO: Update EEPROM's page write bits and write delay.
7721 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
7722 have a page write capability of two bytes", and "This device offers fast (1ms)
7723 byte write". Add 3ms of extra delay.
7728 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
7730 Date: Sun May 27 16:58:45 2007 +0200
7732 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
7734 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
7735 networking does not function. This commit switches PHY to TX mode by clearing
7736 the FX_SEL bit of Mode Control Register. It also reverses commit
7737 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
7742 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
7744 Date: Sun May 27 16:57:15 2007 +0200
7746 Motion-PRO: Add support for the temperature sensor.
7751 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
7753 Date: Sun May 27 16:55:23 2007 +0200
7755 Motion-PRO: Add displaying of CPLD revision information during boot.
7760 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
7762 Date: Sun May 27 16:53:43 2007 +0200
7764 MPC5xxx: Change names of defines related to IPB and PCI clocks.
7766 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
7767 them does not cause PCI or IPB clocks to run at the specified speed.
7768 Instead, they configure divisors used to calculate said clocks. This
7769 patch renames the defines according to their real function.
7774 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
7776 Date: Sun May 27 16:51:48 2007 +0200
7778 Motion-PRO: Add LED support.
7784 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
7786 Date: Thu May 24 12:12:47 2007 +0200
7788 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
7794 commit d756894722c888d09a9fa1df8323753772d3dcce
7796 Date: Thu May 24 09:49:00 2007 +0200
7798 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
7801 fixes a small bug in the 405EZ OCM initialization. Thanks for
7806 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
7808 Date: Thu May 24 08:22:09 2007 +0200
7810 ppc4xx: Update AMCC Acadia support for board revision 1.1
7812 This patch updates the Acadia (405EZ) support for the new 1.1 board
7813 revision. It also adds support for NAND FLASH via the 4xx NDFC.
7815 Please note that the jumper J7 must be in position 2-3 for this
7816 NAND support. Position 1-2 is for NAND booting only. NAND booting
7817 support will follow later.
7821 commit 822d55365bb557e084d0e33625a6dedcc866110b
7823 Date: Wed May 23 14:09:46 2007 -0500
7825 Add LIST_86xx MAKEALL target for PowerPC builds.
7829 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
7831 Date: Tue May 22 12:48:09 2007 +0200
7833 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
7837 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
7839 Date: Tue May 22 12:46:10 2007 +0200
7841 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
7843 This patch adds support for 405 PPC's to the 4xx NAND driver
7844 ndfc.c. This is in preparation for the new AMCC 405EZ.
7848 commit 10603d76767426be803dadd4fb688b97eb69481c
7850 Date: Mon May 21 07:41:22 2007 +0200
7852 ppc4xx: Fix problem in 405EZ OCM initialization
7854 As spotted by Bruce Adler this patch fixes an initialization problem
7859 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
7861 Date: Fri May 18 16:47:03 2007 +0100
7863 Reduce line lengths to 80 characters max.
7865 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
7867 Date: Fri May 18 14:34:07 2007 +0100
7869 Makefile permissions
7871 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
7873 Date: Fri May 18 14:33:11 2007 +0100
7875 Makefile permissions
7877 commit 255a3577c848706441daee0174543efe205a77f8
7879 Date: Wed May 16 16:52:19 2007 -0500
7881 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
7883 For all practical u-boot purposes, TSECs don't differ throughout the
7884 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
7888 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
7890 Date: Wed May 16 14:49:12 2007 +0200
7892 Fix compile problem cause my Microblaze merge
7896 commit ada4697d0230d6da552867777f98a67ec3ba2579
7898 Date: Wed May 16 13:23:10 2007 +0200
7900 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
7902 Because the Sequoia board does not boot with an EBC faster than 66MHz,
7903 the clock divider are changed after the initial boot process.
7905 This allows for maximum clocking speeds to be achieved on newer boards.
7906 Sequoia boards with 666.66 MHz processors require that the EBC divider
7907 be set to 3 in order to start the initial boot process at a slower EBC
7908 speed. After the initial boot process, the divider can be set back to 2,
7909 which will cause the boards to run at 83.333MHz. This is backward
7910 compatible with boards with 533.33 MHz processors, as these boards will
7911 already be set with an EBC divider of 2.
7915 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
7917 Date: Wed May 16 01:16:53 2007 +0200
7919 Minor Coding Style cleanup, update CHANGELOG.
7923 commit d62f64cc23a940eafe712c776b3249e4160753d1
7925 Date: Wed May 16 00:13:33 2007 +0200
7927 Coding Style Cleanup, new CHANGELOG
7929 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
7931 Date: Tue May 15 23:38:05 2007 +0200
7933 Minor coding style cleanup.
7935 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
7937 Date: Fri Apr 20 14:23:02 2007 +0530
7939 Add driver for S-ATA-controller on Intel processors with South
7940 Bridge, ICH-5, ICH-6 and ICH-7.
7944 1. Code is divided in to two files. All functions, which are
7945 controller specific are kept in "drivers/ata_piix.c" file and
7946 functions, which are not controller specific, are kept in
7947 "common/cmd_sata.c" file.
7949 2. Reading and Writing from the S-ATA drive is done using PIO method.
7951 3. Driver can be configured for 48-bit addressing by defining macro
7952 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
7955 4. S-ATA read function is hooked to the File system, commands like
7956 ext2ls and ext2load file can be used. This has been tested.
7958 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
7959 controller and identifies the S-ATA drives connected to it.
7961 6. U-Boot command "sata" is added, which is used to read/write, print
7962 partition table and get info about the drives present. This I have
7963 implemented in same way as "ide" command is implemented in U-Boot.
7965 7. This driver is for S-ATA in native mode.
7967 8. This driver does not support the Native command queuing and
7972 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
7974 Date: Mon Apr 30 15:57:22 2007 +0530
7976 Fixes bug clearing the bss section for i386
7979 There is a bug in the code of clearing the bss section for processor
7980 i386.(File: cpu/i386/start.S)
7981 In the code, bss_start addr (starting addr of bss section) is put into
7982 the register %eax, but the code which clears the bss section refers to
7983 the addr pointed by %edi.
7985 This patch fixes this bug by putting bss_start into %edi register.
7989 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
7991 Date: Mon Apr 30 16:47:28 2007 -0500
7993 Add support for BCM5464 Quad Phy
7995 Added support for Broadcom's BCM5464 Quad Phy
7999 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
8001 Date: Wed May 9 08:10:57 2007 +0800
8003 Search the exception table with linear algorithm
8005 Search the exception table with linear algorithm instead of
8006 bisecting algorithm.
8007 Because the exception table might be unsorted.
8011 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
8013 Date: Mon May 14 11:47:35 2007 +0800
8015 Fix compilation issues on MACOSX
8020 commit 56fd7162985c412317bbf763a225fba23c64fd31
8022 Date: Tue May 15 07:55:42 2007 -0700
8024 Fix for compile of JSE target
8026 The attached patch fixes the compile of the JSE board in the
8027 denx git as of 14 may 2007. It is an extremely simple patch,
8028 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
8030 Fix to compile JSE against 20070514 git of u-boot
8032 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
8034 Date: Fri May 11 12:01:49 2007 +0200
8036 ppc4xx: Add mtcpr/mfcpr access macros
8040 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
8042 Date: Fri May 11 12:01:06 2007 +0200
8044 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
8048 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
8050 Date: Thu May 10 16:55:52 2007 +0200
8052 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
8055 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
8057 Date: Wed May 9 11:42:44 2007 +0100
8059 Add the board directory for SMN42
8061 commit 160131bf965785419626df6c388729fe0b597992
8063 Date: Wed May 9 11:41:58 2007 +0100
8065 Add the files for the SMN42 board
8067 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
8069 Date: Wed May 9 11:40:34 2007 +0100
8071 Remove the deleted files for the SMN42 patch
8073 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
8075 Date: Wed May 9 11:37:56 2007 +0100
8077 New board SMN42 branch
8079 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
8081 Date: Wed May 9 10:24:38 2007 +0100
8083 Makefile permissions
8085 commit b84289b595731e8851df46e893845cc1322c9b9b
8087 Date: Tue May 8 14:17:07 2007 -0500
8089 8641hpcn: Fix Makefile after moving pixis to board/freescale.
8091 The OBJTREE != SRCTREE build scenario was broken.
8097 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
8099 Date: Tue May 8 15:57:43 2007 +0200
8101 add: reading special purpose registers
8103 commit 1a50f164beb065f360fbddb76029607d6b099698
8105 Date: Tue May 8 14:52:52 2007 +0200
8107 add: Microblaze V5 exception handling
8109 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
8111 Date: Tue May 8 14:39:11 2007 +0200
8113 add: FSL control read and write
8115 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
8117 Date: Tue May 8 13:05:44 2007 +0200
8119 [Motion-PRO] Add support for I2C, EEPROM and RTC.
8121 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
8123 Date: Tue May 8 10:23:56 2007 +0200
8125 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
8128 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
8130 Date: Tue May 8 09:39:12 2007 +0200
8132 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
8133 eliminates networking problems in Linux (timeouts).
8135 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
8137 Date: Tue May 8 09:21:57 2007 +0200
8139 [Motion-PRO] Enable Flat Device Tree support and modify default environment
8140 to allow booting of FDT-expecting kernels.
8142 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
8144 Date: Mon May 7 23:58:31 2007 +0200
8146 new: USE_MSR_INTR support
8148 commit 008861a2f3ef2c062744d733787c7e530a1b8761
8150 Date: Mon May 7 22:36:15 2007 +0200
8152 [MPC5xxx] There are networking problems on the Motion-PRO board with
8153 current PHY initalization code (tftp timeouts all the time). This commit
8154 temporarily disables PHY initalization sequence to make the networking
8155 operational, until a fix is found.
8157 commit abca901869c3760b6c5fecb825db6c1d91a78a93
8159 Date: Mon May 7 22:10:36 2007 +0200
8161 Get rid of duplicated file (see include/configs/sbc8560.h instead)
8165 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
8167 Date: Mon May 7 22:07:08 2007 +0200
8169 Get rid of duplicated file (see doc/README.SBC8560 instead)
8173 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
8175 Date: Mon May 7 19:43:10 2007 +0200
8177 fix: read and write MSR - repair number of parameters
8179 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
8181 Date: Mon May 7 19:42:49 2007 +0200
8183 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
8185 A '3' got cut off in the formatting of the last patch to automatically
8186 change the clock speed of the system clock on sequoia board.
8191 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
8193 Date: Mon May 7 19:33:51 2007 +0200
8195 new: fsl interrupt support
8196 FSL_Has_data is connected to INTC.
8198 commit 792032baa7d625e34c981ab6df521911bd8dc861
8200 Date: Mon May 7 19:30:12 2007 +0200
8202 fix: interrupt handler
8205 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
8207 Date: Mon May 7 19:25:08 2007 +0200
8209 fix: remove asm code
8211 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
8213 Date: Mon May 7 19:12:43 2007 +0200
8215 fix: clean interrupt
8217 commit 42efed6130c8fcf7da881385b5427065d2801757
8219 Date: Mon May 7 17:22:25 2007 +0200
8221 fix: interrupt handler for multiple sources
8223 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
8225 Date: Mon May 7 17:11:09 2007 +0200
8227 new: add writing to msr register
8229 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
8231 Date: Mon May 7 16:43:56 2007 +0200
8233 Fix an ancient CHANGELOG conflict
8235 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
8237 Date: Sat May 5 08:12:30 2007 +0200
8239 5xxx: write MAC address to mac-address and local-mac-address
8241 Some device trees have a mac-address property, some have local-mac-address,
8242 and some have both. To support all of these device trees, ftp_cpu_setup()
8243 should write the MAC address to mac-address and local-mac-address, if they
8249 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
8251 Date: Sun Apr 29 14:01:54 2007 +0200
8253 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
8255 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
8256 message. Use PVR to distinguish between the two variants, and print proper CPU
8263 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
8265 Date: Wed Apr 25 16:01:26 2007 +0200
8267 [PATCH] simplify silent console
8272 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
8274 Date: Mon Apr 23 15:30:39 2007 +0200
8276 [PATCH] Avoid assigning PCI resources from zero address
8278 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
8279 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
8280 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
8281 sentence about "0" being considered an invalid address) -- so, use a reasonable
8282 starting value of 0x1000 (that's what the most Linux archs are using).
8284 Alternatively, one might have fixed the calls to pci_set_region() individually
8285 (some code even seems to have taken care of this issue) but that would have
8286 been a lot more work. :-)
8291 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
8293 Date: Mon Apr 23 14:00:11 2007 +0200
8295 [patch] setenv(...) can delete environmentalvariables
8297 update setenv() function so that entering a NULL value for the
8298 variable's value will delete the environmental variable
8303 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
8305 Date: Mon Apr 23 13:54:24 2007 +0200
8307 [patch] use unsigned char in smc91111 driver for mac
8309 the v_mac variable in the smc91111 driver is declared as a signed char ...
8310 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
8311 because when it gets printed out, you get a display like:
8312 0xFFFFFFE0 and that's no good
8316 commit ffc50f9bb194343c6303517a517708457a5eb6b8
8318 Date: Sat May 5 18:54:42 2007 +0200
8320 new: FSL and MSR support #2
8322 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
8324 Date: Sat May 5 18:27:16 2007 +0200
8326 new: FSL and MSR support
8328 commit 2f15278c2eb911c668b4fe562130b78cf554d139
8330 Date: Sat May 5 18:23:11 2007 +0200
8332 Coding stylke cleanup; update CHANGELOG.
8336 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
8338 Date: Sat May 5 18:05:02 2007 +0200
8340 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
8344 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
8346 Date: Sat May 5 17:15:50 2007 +0200
8348 Make "file" command happy with some config.mk files; update CHANGELOG
8350 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
8352 Date: Sat May 5 08:32:14 2007 +0200
8354 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
8356 The AMCC Secquoia board has been changed in a new revision from using a
8357 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
8358 indicates the difference. This patch reads that bit and uses the correct
8359 clock speed for the board. This code is backward compatable will all
8360 prior boards. All prior boards will be read as 33.000.
8365 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
8367 Date: Sat May 5 08:29:01 2007 +0200
8369 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
8371 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
8372 for the 4k NAND boot image so define bus_frequency to 133MHz here
8373 which is save for the refresh counter setup.
8377 commit 2f550ab976405300f5b07bf2890800840d0aa05f
8379 Date: Sat May 5 08:12:30 2007 +0200
8381 5xxx: write MAC address to mac-address and local-mac-address
8383 Some device trees have a mac-address property, some have local-mac-address,
8384 and some have both. To support all of these device trees, ftp_cpu_setup()
8385 should write the MAC address to mac-address and local-mac-address, if they
8391 commit a79886590593ba1d667c840caa4940c61639f18f
8393 Date: Sat May 5 07:04:42 2007 +0200
8395 NAND: Wrong calculation of page number in nand_block_bad()
8397 In case that there is no memory based bad block table available the
8398 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
8399 nand_block_bad() directly. When parameter 'getchip' is set to zero,
8400 nand_block_bad() will not right shift the offset to calculate the
8401 correct page number.
8406 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
8408 Date: Fri May 4 10:02:33 2007 +0200
8410 Fix initrd length corruption in bootm command.
8412 When using FDT Images, the length of an inital ramdisk was
8413 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
8415 Patches by Timur Tabi & Johns Daniel.
8419 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
8421 Date: Thu May 3 19:43:52 2007 -0500
8423 mpc83xx: fix trivial error in MAKEALL
8427 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
8429 Date: Thu May 3 16:34:41 2007 +0200
8431 Update board configuration for STX GP3SSA board:
8433 Enable hush shell, environment in flash rather in EEPROM,
8434 more user-friendly default environment, etc.
8435 The simple EEPROM environment can be selected easily in the board
8440 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
8442 Date: Tue Apr 24 14:37:49 2007 +0200
8444 Cleanup STX GP3SSA code; fix build and compile problems.
8446 commit 35171dc04e028ecacc23ad916a66295472555dbf
8448 Date: Fri Jan 5 09:15:34 2007 +0100
8450 Add support for STX GP3SSA (stxssa) Board
8454 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
8456 Date: Wed May 2 13:31:53 2007 +0200
8458 macb: Don't restart autonegotiation if we already have link
8460 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
8465 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
8467 Date: Wed May 2 13:22:38 2007 +0200
8469 macb: Introduce a few barriers when dealing with DMA descriptors
8471 There were a few theoretical possibilities that the compiler might
8472 optimize away DMA descriptor reads and/or writes and thus cause
8473 synchronization problems with the hardware. Insert barriers where
8474 we depend on reads/writes actually hitting memory.
8478 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
8480 Date: Sat Feb 24 01:08:13 2007 -0600
8482 Cleaned up some 85xx PCI bugs
8484 * Cleaned up the CDS PCI Config Tables and added NULL entries to
8486 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
8487 * Fixed 85xx PCI code to assign powar region sizes based on the
8488 config values (rather than hard-coding them)
8489 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
8493 commit 6743105988fc44d5b0d30388c790607835aae7a6
8495 Date: Mon Apr 23 02:54:25 2007 -0500
8497 Add support for the 8568 MDS board
8499 This included some changes to common files:
8500 * Add 8568 processor SVR to various places
8501 * Add support for setting the qe bus-frequency value in the dts
8502 * Add the 8568MDS target to the Makefile
8506 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
8508 Date: Fri Apr 20 14:34:48 2007 -0500
8510 Add support for treating unknown PHYs as generic PHYs.
8512 When bringing up u-boot on new boards, PHY support sometimes gets
8513 neglected. Most PHYs don't really need any special support,
8514 though. By adding a generic entry that always matches if nothing
8515 else does, we can provide support for "unsupported" PHYs for the
8518 The generic PHY driver supports most PHYs, including gigabit.
8523 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
8525 Date: Wed Feb 7 15:28:04 2007 -0600
8527 Conditionalize 8641 Rev1.0 MCM workarounds
8532 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
8534 Date: Mon Apr 30 13:59:50 2007 -0500
8536 Fix memory initialization on MPC8349E-mITX
8538 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
8539 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
8540 on some ITX boards, notably those with a revision 3.1 CPU.
8542 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
8543 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
8549 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
8551 Date: Mon Apr 30 15:26:21 2007 -0500
8553 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
8555 and fix CPU: to align with Board: display text.
8559 commit c1ab82669d9525998c34e802a12cad662723f22a
8561 Date: Fri Mar 16 13:02:53 2007 -0500
8563 Rewrote picos_to_clk() to avoid rounding errors.
8564 Clarified that conversion is to DRAM clocks rather than platform clocks.
8565 Made function static to spd_sdram.c.
8570 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
8572 Date: Sun Apr 29 14:13:01 2007 +0200
8574 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
8578 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
8580 Date: Sun Apr 29 14:01:54 2007 +0200
8582 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
8584 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
8585 message. Use PVR to distinguish between the two variants, and print proper CPU
8592 commit 5c5d3242935cf3543af01142627494434834cf98
8594 Date: Wed Apr 25 12:34:38 2007 -0500
8596 mpc83xx: minor fixups for 8313rdb introduction
8598 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
8600 Date: Wed Apr 25 16:01:26 2007 +0200
8602 [PATCH] simplify silent console
8607 commit 144876a380f5756f57412caf74c1d6dc201dd796
8609 Date: Tue Apr 24 23:01:02 2007 +0200
8611 [PATCH] MTD partition support, JFFS2 support
8613 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
8615 Date: Tue Apr 24 14:03:45 2007 +0200
8617 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
8621 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
8623 Date: Mon Apr 23 02:37:47 2007 -0500
8625 Reworked 85xx speed detection code
8627 Changed the code to read the registers and calculate the clock
8628 rates, rather than using a "switch" statement.
8634 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
8636 Date: Mon Apr 23 02:24:28 2007 -0500
8640 * Add support to the Makefile
8641 * Add 8544 configuration support to the tsec driver
8642 * Add 8544 SVR numbers to processor.h
8647 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
8649 Date: Fri Feb 23 17:12:25 2007 -0600
8651 Support 1G size on 8548
8653 e500v2 and newer cores support 1G page sizes.
8658 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
8660 Date: Fri Feb 23 17:11:16 2007 -0600
8662 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
8664 The other pagesz constants use one letter to specify order of
8665 magnitude. Also change the one reference to it in mpc8548cds/init.S
8669 commit 1f9a318cea14272edd10d63739e2d326c90f430e
8671 Date: Fri Feb 23 16:28:46 2007 -0600
8673 Only set ddrioovcr for 8548 rev1.
8678 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
8680 Date: Sat Feb 24 01:16:45 2007 -0600
8682 Tweak DDR ECC error counter
8684 Enable single-bit error counter when memory was cleared by ddr controller.
8689 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
8691 Date: Mon Feb 12 13:34:55 2007 -0600
8693 85xx: write MAC address to mac-address and local-mac-address
8695 Some device trees have a mac-address property, some have local-mac-address,
8696 and some have both. To support all of these device trees, ftp_cpu_setup()
8697 should write the MAC address to mac-address and local-mac-address, if they
8702 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
8704 Date: Mon Apr 23 01:44:44 2007 -0500
8706 Some 85xx cpu cleanups
8708 * Cleaned up the TSR[WIS] clearing
8709 * Cleaned up DMA initialization
8715 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
8717 Date: Mon Apr 23 01:32:22 2007 -0500
8719 Add cpu support for the 8544
8721 Recognize new SVR values, and add a few register definitions
8727 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
8729 Date: Wed Apr 11 16:51:02 2007 -0500
8731 Add MPC8544DS basic port board files.
8733 Add board port under new board/freescale directory
8734 structure and reuse existing PIXIS FPGA support there.
8739 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
8741 Date: Wed Apr 11 16:50:57 2007 -0500
8743 Add MPC8544DS main configuration file.
8748 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
8750 Date: Wed Dec 27 22:07:15 2006 +0300
8752 Fix PCI I/O space mapping on Freescale MPC85x0ADS
8754 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
8755 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
8756 describing the local address window used for the PCI I/O space accesses -- fix
8757 this and carry over the necessary changes into the MPC8560ADS code since the
8758 PCI I/O space mapping was also broken for this board (by the earlier commit
8759 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
8760 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
8764 board/mpc8540ads/init.S | 4 ++--
8765 board/mpc8560ads/init.S | 4 ++--
8766 include/configs/MPC8540ADS.h | 5 ++---
8767 include/configs/MPC8541CDS.h | 2 +-
8768 include/configs/MPC8548CDS.h | 2 +-
8769 include/configs/MPC8560ADS.h | 8 ++++----
8770 6 files changed, 12 insertions(+), 13 deletions(-)
8772 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
8774 Date: Tue Dec 5 16:42:30 2006 +0800
8776 u-boot: Fix e500 v2 core reset bug
8778 The following patch fixes the e500 v2 core reset bug.
8779 For e500 v2 core, a new reset control register is added to reset the
8784 commit 63247a5acd58032e6cf33f525bc3923b467bac88
8786 Date: Wed Dec 20 11:01:00 2006 +0800
8788 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
8790 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
8791 entry number to control the loop. This can reduce the potential risk
8792 for the 85xx processor increasing its TLB adn LAW entry number.
8797 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
8799 Date: Mon Dec 18 17:01:04 2006 +0800
8801 u-boot: Fix the 85xxcds tsec bug
8803 Fix the 85xxcds tsec bug.
8804 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
8808 commit 7337b237ffc4aaf1b9467024fe472a880d852598
8810 Date: Fri Dec 15 14:43:31 2006 +0800
8812 u-boot: Fix CPU2 errata on MPC8548CDS board
8814 This patch apply workaround of CPU2 errata on MPC8548CDS board.
8818 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
8820 Date: Mon Dec 18 16:25:15 2006 +0800
8822 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
8824 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
8828 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
8830 Date: Thu Dec 14 14:14:55 2006 +0800
8832 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
8834 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
8838 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
8840 Date: Mon Apr 16 14:54:15 2007 -0500
8842 mpc83xx: Add MPC8313ERDB support.
8846 commit 49ea3b6eafe606285ae4d5c378026153dde53200
8848 Date: Mon Apr 16 14:34:21 2007 -0500
8850 mpc83xx: Add generic PCI setup code.
8852 Board code can now request the generic setup code rather than having to
8853 copy-and-paste it for themselves. Boards should be converted to use this
8854 once they're tested with it.
8858 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
8860 Date: Mon Apr 16 14:34:19 2007 -0500
8862 mpc83xx: Add 831x support to speed.c.
8866 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
8868 Date: Mon Apr 16 14:34:18 2007 -0500
8870 mpc83xx: Add 831x support to global_data.h
8874 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
8876 Date: Mon Apr 16 14:34:16 2007 -0500
8878 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
8880 Rather than misleadingly define PVR_83xx as the specific type of 83xx
8881 being built for, the PVR of each core revision is defined. checkcpu() now
8882 prints the core that it detects, rather than aborting if it doesn't find
8883 what it thinks it wants.
8887 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
8889 Date: Mon Apr 16 14:34:15 2007 -0500
8891 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
8895 commit d87c57b201b4572d16f1b642998faa00c9912b16
8897 Date: Mon Apr 16 14:31:55 2007 -0500
8899 mpc83xx: Add register definitions for MPC831x.
8903 commit 7fc4c71a143be8666d70803fb25ae60379c95622
8905 Date: Mon Apr 23 15:39:59 2007 +0200
8911 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
8913 Date: Mon Apr 23 15:30:39 2007 +0200
8915 [PATCH] Avoid assigning PCI resources from zero address
8917 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
8918 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
8919 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
8920 sentence about "0" being considered an invalid address) -- so, use a reasonable
8921 starting value of 0x1000 (that's what the most Linux archs are using).
8923 Alternatively, one might have fixed the calls to pci_set_region() individually
8924 (some code even seems to have taken care of this issue) but that would have
8925 been a lot more work. :-)
8930 commit afb903a2eb9436baa9270ccc0c27082d86497d89
8932 Date: Mon Apr 23 14:00:11 2007 +0200
8934 [patch] setenv(...) can delete environmentalvariables
8936 update setenv() function so that entering a NULL value for the
8937 variable's value will delete the environmental variable
8942 commit 36f104e5caa747d568eff26b369565af57c2ffa6
8944 Date: Mon Apr 23 13:54:24 2007 +0200
8946 [patch] use unsigned char in smc91111 driver for mac
8948 the v_mac variable in the smc91111 driver is declared as a signed char ...
8949 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
8950 because when it gets printed out, you get a display like:
8951 0xFFFFFFE0 and that's no good
8955 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
8957 Date: Mon Apr 23 13:10:52 2007 +0200
8959 USB: (Another) delay for crappy USB keys.
8961 Some USB keys are slow in giving back an answer when the Root HUB
8962 enables power lines.
8966 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
8968 Date: Mon Apr 23 12:00:22 2007 +0200
8970 Remove BOARDLIBS usage completely
8974 commit 32556443840f127170e4baa8bdd5b567039f6c36
8976 Date: Sat Apr 21 21:07:22 2007 +0200
8978 [PATCH] SystemACE support for Microblaze
8980 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
8982 Date: Sat Apr 21 21:02:40 2007 +0200
8984 16bit read/write little endian
8986 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
8988 Date: Sat Apr 21 20:53:31 2007 +0200
8990 Change ML401 parameters - Xilinx BSP
8992 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
8994 Date: Wed Feb 28 05:37:29 2007 -0600
8996 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
9000 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
9002 Date: Fri Jan 19 10:42:37 2007 +0800
9004 Enable LAWs for MPC8641 PCI-Ex2.
9009 commit bd7851ce1e1f140665b520026abf1042968b1102
9011 Date: Fri Apr 20 14:12:26 2007 -0500
9013 mpc86xx; Write MAC address to mac-address and local-mac-address
9015 Some device trees have a mac-address property, some have local-mac-address,
9016 and some have both. To support all of these device trees, ftp_cpu_setup()
9017 should write the MAC address to mac-address and local-mac-address, if they
9023 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
9025 Date: Fri Apr 20 14:11:38 2007 -0500
9027 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
9032 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
9034 Date: Fri Apr 20 17:43:28 2007 +0200
9036 Cleanup compiler warnings, update CHANGELOG
9040 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
9042 Date: Fri Apr 20 12:01:47 2007 +0200
9044 Fix breakage of NC650 board with respect to nand support.
9048 commit 39f23cd90947639ac278a18ff277ec786b5ac167
9050 Date: Fri Apr 20 11:13:16 2007 +0200
9052 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
9054 G2 core reference manual says decrementer and time base
9055 are decreasing/increasing once every 4 bus clock cycles.
9056 Lets fix it, so time in Linux won't run twice as fast
9061 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
9063 Date: Thu Apr 19 23:14:39 2007 -0400
9065 Fix serious pointer bug with bootm and reserve map.
9067 What was suppose to be a stack variable was declared as a pointer,
9068 overwriting random memory.
9069 Also moved the libfdt.a requirement into the main Makefile. That is
9072 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
9074 Date: Thu Apr 19 09:53:52 2007 +0200
9076 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
9078 Previous versions used full wait states for the chip select #1 which
9079 is connected to the Xilinix SystemACE controller on the AMCC Katmai
9080 evaluation board. This leads to really slow access and therefore low
9081 performance. This patch now sets up the chip select a lot faster
9082 resulting in much better read/write performance of the Linux driver.
9086 commit 37837828d89084879bee2f2b8c7c68d4695940df
9088 Date: Wed Apr 18 17:49:29 2007 +0200
9090 Clenaup, update CHANGELOG
9094 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
9096 Date: Wed Apr 18 17:20:58 2007 +0200
9102 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
9104 Date: Wed Apr 18 17:07:26 2007 +0200
9106 Cleanup, update CHANGELOG
9110 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
9112 Date: Wed Apr 18 16:17:46 2007 +0200
9116 commit ad4eb555671d97f96dc56eab55103b1f86874b01
9118 Date: Wed Apr 18 14:30:39 2007 +0200
9120 MCC200 board: remove warning which is obsolete after PSoC firmware changes
9124 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
9126 Date: Wed Apr 18 12:11:05 2007 +0200
9128 [PATCH] icecube/lite5200b: document wakeup from low-power support
9132 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
9134 Date: Wed Apr 18 12:07:47 2007 +0200
9136 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
9140 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
9142 Date: Wed Apr 18 12:05:59 2007 +0200
9144 ppc4xx: Add output for bootrom location to 405EZ ports
9146 Now 405EZ ports also show upon bootup from which boot device
9147 they are configured to boot:
9149 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
9151 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
9152 Bootstrap Option E - Boot ROM Location EBC (32 bits)
9153 16 kB I-Cache 16 kB D-Cache
9154 Board: Acadia - AMCC PPC405EZ Evaluation Board
9158 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
9160 Date: Tue Apr 17 13:30:33 2007 +0100
9162 Move ppearse to ARM board list
9163 Add Konstantin Kletschke for scb9328.
9166 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
9168 Date: Mon Apr 16 14:00:13 2007 +0200
9170 [PATCH] icecube/lite5200b: wakeup from low-power support
9172 U-Boot part of Lite5200b low power mode support.
9173 Puts SDRAM out of self-refresh and transfers control to
9174 address saved at physical 0x0.
9179 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
9181 Date: Sun Apr 15 13:54:26 2007 -0400
9183 Fix the ft_cpu_setup() property settings.
9185 Use "setter" functions instead of flags, cleaner and more flexible.
9186 It also fixes the problem noted by Timur Tabi that the ethernet MAC
9187 addresses were all being set incorrectly to the same MAC address.
9189 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
9191 Date: Sat Apr 14 22:51:24 2007 -0400
9193 Improve the bootm command for CONFIG_OF_LIBFDT
9195 In bootm, create the "/chosen" node only if it doesn't already exist
9196 (better matches the previous behavior).
9197 Update for proper reserved memory map handling for initrd.
9199 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
9201 Date: Sat Apr 14 22:46:41 2007 -0400
9203 Add some utilities to manipulate the reserved memory map.
9205 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
9207 Date: Sat Apr 14 21:16:54 2007 +0200
9211 commit 8e6875183cdca91c134408d119d4abcd48ef6856
9213 Date: Sun Dec 17 18:56:46 2006 +0100
9215 AVR32: Enable MMC support
9217 Set up the portmux for the MMC interface and enable the MMC driver
9218 along with support for DOS partitions, ext2 and FAT filesystems.
9222 commit fc26c97bb6df41b4a95662c34054fe912387bf38
9224 Date: Fri Jan 20 10:03:53 2006 +0100
9228 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
9230 The AT91 ARM-based CPUs use basically the same hardware, so it should
9231 be possible to share this driver, but no effort has been made so far.
9233 Hardware documentation can be found in the AT32AP7000 data sheet,
9234 which can be downloaded from
9236 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
9240 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
9242 Date: Sun Dec 17 18:55:37 2006 +0100
9244 AVR32: Add clk and gpio infrastructure for mmci
9246 Implement functions for configuring the mmci pins, as well as
9247 functions for getting the clock rate of the mmci controller.
9251 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
9253 Date: Sun Dec 17 18:53:56 2006 +0100
9255 Enable partition support with MMC
9257 Include implementations of init_part() and get_partition_info() when
9262 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
9264 Date: Sun Dec 17 17:14:30 2006 +0100
9266 AVR32: Enable networking
9268 Implement MACB initialization for AVR32 and ATSTK1000, and turn
9269 everything on, including the MACB driver.
9273 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
9275 Date: Fri Jan 20 10:03:34 2006 +0100
9277 Atmel MACB ethernet driver
9279 Driver for the Atmel MACB on-chip ethernet controller.
9281 This driver has been tested on the ATSTK1000 board with a AT32AP7000
9282 CPU. It should probably work on AT91SAM926x as well with some minor
9285 Hardware documentation can be found in the AT32AP7000 data sheet,
9286 which can be downloaded from
9288 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
9292 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
9294 Date: Sun Dec 17 16:56:14 2006 +0100
9296 AVR32: Add clk and gpio infrastructure for macb0 and macb1
9298 Implement functions for configuring the macb0 and macb1 pins, as
9299 well as functions for getting the clock rate of the various
9300 busses the macb ethernet controllers are connected to.
9304 commit d5acb95b16a0a74c643524342c3437e765426d05
9306 Date: Sun Dec 17 15:39:15 2006 +0100
9308 AVR32: Implement simple DMA memory allocator
9310 Implement dma_alloc_coherent() which returns cache-aligned
9315 commit 91975b0fea773c9e681fea8cf3349669f27685ee
9317 Date: Sun Dec 17 15:46:02 2006 +0100
9319 Import <linux/mii.h> from the Linux kernel
9321 Instead of creating yet another set of MII register definitions
9322 in the macb driver, here's a complete set of definitions for everyone
9327 commit 1b804b229556a4d862da93c0ec94e79419364b2c
9329 Date: Wed Mar 21 19:47:36 2007 +0100
9331 AVR32: Include more commands for ATSTK1000
9333 Include the imi, imls and jffs commands sets by default on ATSTK1000.
9334 Also define CONFIG_BOOTARGS to something more useful, define
9335 CONFIG_BOOTCOMMAND and enable autoboot by default.
9339 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
9341 Date: Wed Mar 21 19:44:48 2007 +0100
9343 AVR32: Provide a definition of struct stat
9345 Copy the definition of struct stat from the Linux kernel.
9349 commit 12f099c08167a7a51aeee623bc16dafd0841271c
9351 Date: Sun Dec 17 14:46:06 2006 +0100
9353 AVR32: Use initdram() instead of board_init_memories()
9355 Conform to the "standard" interface and use initdram() instead of
9356 board_init_memories() on AVR32. This enables us to get rid of the
9357 sdram_size member of the global_data struct as well.
9361 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
9363 Date: Mon Nov 20 15:53:10 2006 +0100
9365 AVR32: Relocate u-boot to SDRAM
9367 Relocate the u-boot image into SDRAM like everyone else does. This
9368 means that we can handle much larger .data and .bss than we used to.
9372 commit df548d3c3e2bbc40258713167859ffc2ce99a900
9374 Date: Sun Nov 19 18:06:53 2006 +0100
9376 AVR32: Resource management rewrite
9378 Rewrite the resource management code (i.e. I/O memory, clock gating,
9379 gpio) so it doesn't depend on any global state. This is necessary
9380 because this code is heavily used before relocation to RAM, so we
9381 can't write to any global variables.
9383 As an added bonus, this makes u-boot's memory footprint a bit smaller,
9384 although some functionality has been left out; all clocks are enabled
9385 all the time, and there's no checking for gpio line conflicts.
9389 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
9391 Date: Sat Nov 18 18:01:13 2006 +0100
9393 AVR32: Clean up memory-map.h for at32ap7000
9395 Convert spaces to tabs (must have missed this one last time around),
9396 sort the entries by address and group them together by bus
9401 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
9403 Date: Sat Nov 18 17:32:31 2006 +0100
9405 AVR32: Build position-independent u-boot
9407 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
9408 position independent. This will make relocation a lot easier.
9410 -mno-init-got means that gcc shouldn't emit code to load the GOT
9411 address into r6 in every function prologue. We do it once and for
9412 all in the early startup assembly code, so enabling this option
9413 makes u-boot a bit faster and smaller.
9415 The assembly parts have always been position-independent, so no code
9416 changes should be necessary.
9420 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
9422 Date: Sat Nov 18 17:24:31 2006 +0100
9424 AVR32: Use avr32-linux- cross-compilation prefix by default
9426 It doesn't really matter which toolchain you use to compile u-boot,
9427 but the avr32-linux one is probably what most people have installed.
9431 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
9433 Date: Sat Nov 18 17:15:30 2006 +0100
9435 AVR32: Split start_u_boot into board_init_f and board_init_r
9437 Split the avr32 initialization code into a function to run before
9438 relocation, board_init_f and a function to run after relocation,
9439 board_init_r. For now, board_init_f simply calls board_init_r
9444 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
9446 Date: Sat Apr 14 05:26:48 2007 +0200
9448 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
9449 clear the Display after reset.
9453 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
9455 Date: Fri Apr 13 09:13:33 2007 +0200
9457 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
9459 Fix bug introduced by "Fix get_partition_info() parameter error in all
9460 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
9461 to use diskboot or scsiboot form another device than 0.
9465 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
9467 Date: Fri Apr 13 08:02:24 2007 +0200
9469 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
9474 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
9476 Date: Fri Mar 9 19:08:25 2007 +0800
9478 Fix two bugs for MPC83xx DDR2 controller SPD Init
9480 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
9481 the first bug is that the picos_to_clk routine introduces a huge
9482 rounding error in 83xx.
9483 the second bug is that the mode register write recovery field is
9484 tWR-1, not tWR >> 1.
9486 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
9488 Date: Thu Apr 12 14:15:59 2007 +0200
9490 ppc4xx: Fix i2c divisor calcularion for PPC4xx
9492 This patch fixes changes the i2c_init(...) function to use the function
9493 get_OPB_freq() rather than calculating the OPB speed by
9494 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
9495 specific per processor. The prior method was not and so was calculating
9496 the wrong speed for some PPC4xx processors.
9501 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
9503 Date: Wed Apr 11 17:25:01 2007 +0200
9509 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
9511 Date: Wed Apr 11 17:22:55 2007 +0200
9513 Update for SC3 board
9515 * Make IDE timeout configurable through ide_reset_timeout variable.
9516 * Use Newline as "password" string
9517 * Use just a single partition in NAND flash
9519 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
9521 Date: Mon Jan 22 12:37:30 2007 -0600
9523 Add PIXIS FPGA support for MPC8641HPCN board.
9525 Move the 8641HPCN's PIXIS code to the new directory
9526 board/freescale/common/ as it will be shared by
9527 future boards not in the same processor family.
9529 Write a "pixis_reset" command that utilizes the FPGA
9530 reset sequencer to support alternate soft-reset options
9531 such as using the "alternate" flash bank, enabling
9532 the watch dog, or choosing different CPU frequencies.
9534 Add documentation for the pixis_reset to README.mpc8641hpcn.
9539 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
9541 Date: Fri Apr 6 14:19:43 2007 -0400
9543 Moved fdt command support code to fdt_support.c
9545 ...in preparation for improving the bootm command's handling of fdt blobs.
9546 Also cleaned up some coding sloppiness.
9548 commit 6679f9299534e488a171a9bb8f9bb891de247aab
9550 Date: Fri Apr 6 14:17:14 2007 -0400
9552 libfdt: Make fdt_check_header() public
9554 Changed _fdt_check_header() to fdt_check_header() and made it part of
9555 the interface - it is a useful routine.
9557 Also did some asthetics cleanup to the include files (headers).
9559 commit c0707ce65677650b5ceab0500ee50ae5168afef2
9561 Date: Thu Apr 5 18:34:06 2007 +0800
9563 [Blackfin][PATCH] Kill off a bunch of common local prototypes
9565 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
9567 Date: Thu Apr 5 18:33:04 2007 +0800
9569 [Blackfin][PATCH] Fix dynamic CPLB generation issue
9571 commit 0445e3a264251d75b1be45ef713c70726a2952f0
9573 Date: Thu Apr 5 18:31:47 2007 +0800
9575 [Blackfin][PATCH] minior cleanup
9577 commit 155fd766573981090e638b493d5857562151862e
9579 Date: Thu Apr 5 18:31:18 2007 +0800
9581 [Blackfin][PATCH] Fix copyright and update license
9583 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
9585 Date: Thu Apr 5 18:30:25 2007 +0800
9587 [Blackfin][PATCH] Add BF537 EMAC driver initialization
9589 commit 889256e8604e0c68db1d866d720894dffede9df6
9591 Date: Thu Apr 5 18:29:55 2007 +0800
9593 [Blackfin][PATCH] call real the system synchronize instruction
9595 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
9597 Date: Thu Apr 5 18:29:17 2007 +0800
9599 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
9601 commit dfeeab2cd680df047e68e723b246adf6f33bb556
9603 Date: Thu Apr 5 18:28:34 2007 +0800
9605 [Blackfin][PATCH]: fix flash unaligned copy issue
9607 commit 443feb740584e406efa203af909fe2926608e8d5
9609 Date: Wed Mar 21 09:55:01 2007 +0300
9611 Update usage of 'nc' in README.NetConsole
9613 Added information about usage of NetConsole on systems where the -l and -p
9614 switches are mutually exclusive.
9619 commit 31c98a88228021b314c89ebb8104fb6473da4471
9621 Date: Wed Apr 4 02:09:30 2007 +0200
9623 Minor coding style cleanup.
9625 commit 94abd7c0583ebe01e799b25f451201deeaab550d
9627 Date: Wed Apr 4 01:49:15 2007 +0200
9631 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
9633 Date: Tue Apr 3 14:27:18 2007 +0200
9635 Support for the Philips ISP116x HCD (Host Controller Driver)
9639 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
9641 Date: Tue Apr 3 14:27:08 2007 +0200
9643 USB: cleanup monahans usb support. Remove dead code.
9647 commit a65c5768e5537530bd1780af3d3fddc3113a163c
9649 Date: Mon Apr 2 10:09:30 2007 +0200
9651 ppc4xx: Change SysACE address on Katmai
9653 With this new base address of the Xilinx SystemACE controller
9654 the Linux driver will be easier to adapt, since it can now be
9655 mapped via the "normal" ioremap() call.
9659 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
9661 Date: Sat Mar 31 14:30:53 2007 -0400
9663 Fix some minor whitespace violations.
9665 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
9667 Date: Sat Mar 31 12:23:51 2007 -0400
9669 Add a flattened device tree (fdt) command (2 of 2)
9671 Modifications to the existing code to support the new fdt command.
9673 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
9675 Date: Sat Mar 31 12:22:10 2007 -0400
9677 Add a flattened device tree (fdt) command (1 of 2)
9679 The fdt command uses David Gibson's libfdt library to manipulate as well
9680 as print the flattened device tree. This patch is the new command,
9681 the second part is the modifications to the existing code.
9683 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
9685 Date: Sat Mar 31 12:13:43 2007 -0400
9687 libfdt: Enhanced and published fdt_next_tag()
9689 Enhanced the formerly private function _fdt_next_tag() to allow stepping
9690 through the tree, used to produce a human-readable dump, and made
9691 it part of the published interface.
9692 Also added some comments.
9694 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
9696 Date: Sat Mar 31 12:05:39 2007 -0400
9698 libfdt: Customizations for use by u-boot.
9700 Changes to David Gibson's original source to fit into u-boot's
9701 environment. No functionality changes.
9703 commit 35748177c64a4a83a00057e93bb33e40278a2a96
9705 Date: Sat Mar 31 12:00:56 2007 -0400
9707 libfdt: Import libfdt source (2 of 2)
9709 This adds the applicable libfdt source files (unmodified) and a README
9710 to explain where the source came from.
9712 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
9714 Date: Sat Mar 31 11:59:59 2007 -0400
9716 libfdt: Import libfdt source (1 of 2)
9718 This adds the applicable libfdt source files (unmodified) and a README
9719 to explain where the source came from.
9721 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
9723 Date: Sat Mar 31 13:16:23 2007 +0200
9725 ppc4xx: Update Katmai bootstrap command
9727 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
9732 commit cabee756a6532986729477c3cc1ea16ef8517ad2
9734 Date: Sat Mar 31 13:15:06 2007 +0200
9736 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
9738 Additional RAM information is now printed upon powerup, like
9739 DDR2 frequency and CAS latency.
9743 commit 60723803431ac75cad085690789e433d5ab9174e
9745 Date: Sat Mar 31 08:48:36 2007 +0200
9747 ppc4xx: Change Yucca config file to support ECC
9749 With the updated 44x DDR2 driver the Yucca board now supports
9750 ECC generation and checking.
9754 commit 490e5730c674b20d708b783a2c5ffd7208f83873
9756 Date: Sat Mar 31 08:47:34 2007 +0200
9758 ppc4xx: Fix "bootstrap" command for Katmai board
9760 The board specific "bootstrap" command is now fixed and can
9761 be used for the AMCC Katmai board to configure different
9762 CPU/PLB/OPB frequencies.
9766 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
9768 Date: Sat Mar 31 08:46:08 2007 +0200
9770 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
9772 Fix a bug in the auto calibration routine. This driver now runs
9773 more reliable with the tested modules. It's also tested with
9774 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
9778 commit 342cd097be1e7affe82f42ab3da220959a699e64
9780 Date: Fri Mar 30 22:52:09 2007 +0200
9782 [PATCH] Clean include dependence
9784 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
9786 Date: Fri Mar 30 22:42:45 2007 +0200
9788 [CLEAN] Remove inefficient Suzaku code
9790 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
9792 Date: Wed Mar 28 15:03:16 2007 +0200
9794 Merge some AMCC make targets to keep the top-level Makefile smaller
9798 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
9800 Date: Wed Mar 28 14:52:12 2007 +0200
9802 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
9804 The "old" i2c commands (iprobe, imd...) are now compiled in again,
9805 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
9810 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
9812 Date: Tue Mar 27 00:32:16 2007 +0200
9814 PATCH: Resolve GPL license problem
9816 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
9818 Date: Mon Mar 26 12:03:36 2007 +0200
9820 PXA: pxa27x USB OHCI support
9824 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
9826 Date: Mon Mar 26 11:21:05 2007 +0200
9828 USB: remove the S3C24X0_merge #define, which was introduced while
9829 merging OHCI drivers.
9833 commit 1798049522f594013aea29457d46794298c6ae15
9835 Date: Mon Mar 26 01:39:07 2007 +0200
9837 Support for XUPV2P board
9839 BSP autoconfig support
9841 commit 0d974d5297349504a2ddfa09314be573b5df320a
9843 Date: Sat Mar 24 15:57:09 2007 +0100
9845 [PATCH] Add 4xx GPIO functions
9847 This patch adds some 4xx GPIO functions. It also moves some of the
9848 common code and defines into a common 4xx GPIO header file.
9852 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
9854 Date: Sat Mar 24 15:55:58 2007 +0100
9856 [PATCH] Small Sequoia cleanup
9860 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
9862 Date: Sat Mar 24 15:45:34 2007 +0100
9864 [PATCH] Clean up 40EZ/Acadia support
9866 This patch cleans up all the open issue of the preliminary
9871 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
9873 Date: Tue Dec 12 11:02:20 2006 -0600
9875 Fix 8641HPCN problem with ld version 2.16
9877 (Dot outside sections problem).
9879 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
9883 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
9885 Date: Thu Dec 7 10:35:55 2006 -0600
9887 Set Rev 2.x 86xx PIC in mixed mode.
9889 Prevent false interrupt from hanging Linux as MSR[EE] is set
9890 to enable interrupts by changing the PIC out of the default
9891 pass through mode into mixed mode.
9896 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
9898 Date: Thu Dec 7 10:32:35 2006 -0600
9900 Add flash cmd function to 8641HPCN ramboot
9902 Also fixes some commmand for 8641 HPCN ramboot case.
9907 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
9909 Date: Thu Dec 7 10:34:14 2006 -0600
9911 Add support for 8641 Rev 2 silicon.
9913 Without this patch, I am unable to get to the prompt on rev 2 silicon.
9914 Only set ddrioovcr for rev1.
9919 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
9921 Date: Thu Mar 22 00:13:12 2007 +0100
9923 Code cleanup / re-insert previous Copyright entries.
9927 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
9929 Date: Wed Mar 21 23:26:15 2007 +0100
9931 Code cleanup. Update CHANGELOG
9933 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
9935 Date: Wed Mar 21 14:54:29 2007 +0100
9937 ppc4xx: Fix file mode of include/configs/acadia.h
9941 commit d5f4614c9350d9333e575100fb250aab774d0258
9943 Date: Wed Mar 21 14:41:46 2007 +0100
9945 SPC1920: fix small clock routing bug
9949 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
9951 Date: Wed Mar 21 13:39:57 2007 +0100
9953 [PATCH] Add AMCC Acadia (405EZ) eval board support
9955 This patch adds support for the new AMCC Acadia eval board.
9957 Please note that this Acadia/405EZ support is still in a beta stage.
9958 Still lot's of cleanup needed but we need a preliminary release now.
9962 commit e01bd218b00af73499331a1a701625a852cd286f
9964 Date: Wed Mar 21 13:38:59 2007 +0100
9966 [PATCH] Add AMCC PPC405EZ support
9968 This patch adds support for the new AMCC 405EZ PPC. It is in
9969 preparation for the AMCC Acadia board support.
9971 Please note that this Acadia/405EZ support is still in a beta stage.
9972 Still lot's of cleanup needed but we need a preliminary release now.
9976 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
9978 Date: Wed Mar 21 08:45:17 2007 +0100
9980 [PATCH] TQM8272: dont change the bits given from the HRCW
9981 for the SIUMCR and BCR Register.
9982 Fix the calculation for the EEprom Size
9986 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
9988 Date: Tue Mar 20 18:16:24 2007 +0800
9990 [Blackfin][PATCH] Add BF561 EZKIT board support
9992 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
9994 Date: Mon Mar 19 22:55:58 2007 +0800
9996 [Blackfin][PATCH] minor cleanup
9998 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
10000 Date: Mon Mar 19 13:10:08 2007 +0100
10002 Remove obsoleted POST files.
10006 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
10008 Date: Mon Mar 19 01:26:11 2007 +0800
10010 [PATCH] Add flash chip M29W320ET/B support
10012 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
10014 Date: Mon Mar 19 01:24:52 2007 +0800
10016 [Blackfin][PATCH] Add BF537 stamp board support
10018 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
10020 Date: Fri Mar 16 21:11:42 2007 +0100
10022 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
10024 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
10025 DDR memory are dynamically programmed matching the total size
10026 of the equipped memory (DIMM modules).
10030 commit 76d1466f918b881cda2d259254761e73885093c2
10032 Date: Tue Mar 13 13:38:05 2007 +0100
10034 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
10035 boards in terms of unification.
10039 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
10041 Date: Tue Mar 13 16:05:55 2007 +0100
10043 Make SC3 board build with 'make O='; use 'addcons' consistently
10044 (SC3 and Jupiter used to use 'addcon' instead).
10048 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
10050 Date: Tue Mar 13 09:40:59 2007 +0100
10052 [PATCH] update board config for jupiter Board:
10054 CONFIG_CMDLINE_EDITING,
10055 CFG_ENV_ADDR_REDUND activated
10059 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
10061 Date: Mon Mar 12 12:11:55 2007 +0800
10063 [Blackfin][PATCH] minor cleanup
10065 commit bfa5754a58477ac917d21527cd0f079d87cf188e
10067 Date: Mon Mar 12 01:42:06 2007 +0800
10069 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
10071 commit 8440bb14581a294375c34b91b42512f9753d1130
10073 Date: Mon Mar 12 00:25:14 2007 +0800
10075 [Blackfin][PATCH] code cleanup
10077 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
10079 Date: Sun Mar 11 13:48:24 2007 +0100
10081 [Microblaze][PATCH] part 2
10083 interrupt controller support
10087 board information support
10089 booting image support
10091 adding support for Xilinx ML401
10093 commit 76316a318de91f6184e7c22a10e02d275ade2441
10095 Date: Sun Mar 11 13:42:58 2007 +0100
10097 [Microblaze][PATCH]
10099 interrupt controller support
10103 board information support
10105 booting image support
10107 adding support for Xilinx ML401
10109 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
10111 Date: Sat Mar 10 23:49:29 2007 +0800
10113 [Blackfin][PATCH] code cleanup
10115 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
10117 Date: Fri Mar 9 13:40:56 2007 +0800
10119 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
10121 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
10123 Date: Fri Mar 9 13:38:44 2007 +0800
10125 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
10127 commit 992423ab43c2bcf6b704853bd00af77450915e20
10129 Date: Thu Mar 8 23:00:08 2007 +0100
10131 ppc4xx: Fix file mode of sequoia.c
10135 commit eb92f613556800f7483666db09d9a237ad911d4a
10137 Date: Thu Mar 8 22:52:51 2007 +0100
10141 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
10143 Date: Thu Mar 8 09:39:48 2007 -0600
10145 ppc4xx: Clear Sequoia/Rainier security engine reset bits
10149 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
10151 Date: Thu Mar 8 16:26:52 2007 +0100
10153 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
10157 commit d9fc703246840c4b268debf48c334ba55c597dc0
10159 Date: Thu Mar 8 16:25:47 2007 +0100
10161 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
10165 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
10167 Date: Thu Mar 8 16:23:11 2007 +0100
10169 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
10173 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
10175 Date: Thu Mar 8 16:20:32 2007 +0100
10177 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
10181 commit f9fc6a5852a6335840882fa2111925010eea1abe
10183 Date: Wed Mar 7 15:32:01 2007 +0100
10185 fixed ethernet phy configuration for plu405 board
10189 commit 769104c9356594deb2092e204a39c05b33202d6c
10191 Date: Thu Mar 8 21:49:27 2007 +0100
10195 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
10197 Date: Thu Mar 8 10:13:16 2007 +0100
10199 [PATCH] Update AMCC Luan 440SP eval board support
10201 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
10202 inititializition. This includes DDR auto calibration and support
10203 for different DIMM modules, instead of the fixed setup used in
10204 the earlier version.
10206 This patch also enables the cache in FLASH for the startup
10207 phase of U-Boot (while running from FLASH). After relocating to
10208 SDRAM the cache is disabled again. This will speed up the boot
10209 process, especially the SDRAM setup, since there are some loops
10210 for memory testing (auto calibration).
10214 commit 2f5df47351910a2936c7741cf111855829200943
10216 Date: Thu Mar 8 10:10:18 2007 +0100
10218 [PATCH] Update AMCC Yucca 440SPe eval board support
10220 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
10221 inititializition. This includes DDR auto calibration and support
10222 for different DIMM modules, instead of the fixed setup used in
10223 the earlier version.
10227 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
10229 Date: Thu Mar 8 10:07:18 2007 +0100
10231 ppc4xx: Small AMCC Katmai 440SPe update
10235 commit df294497479b1dca6dd86318b2a912f72fede0df
10237 Date: Thu Mar 8 10:06:09 2007 +0100
10239 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
10243 commit 83853178bd36bca6f0f8f1331476620c84a587fc
10245 Date: Wed Mar 7 12:14:50 2007 -0600
10247 net - Support ping reply when processing net-loop
10249 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
10251 This permits the ping command to test the phy interface when the phy
10252 is put in loopback mode (typically by setting register 0 bit 14).
10254 It also allows the port to respond to an external ping when u-boot is
10255 processing some other net command (such as tftp). This is useful when
10256 tftp appears to hang.
10261 commit fa1aef15bcd47736687be1af544506e90fba545d
10263 Date: Wed Mar 7 16:43:00 2007 +0100
10265 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
10267 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
10268 DDR memory are dynamically programmed matching the total size
10269 of the equipped memory (DIMM modules).
10273 commit e2ebe696818939e2b974628be9c921ea3fe9de13
10275 Date: Wed Mar 7 16:39:36 2007 +0100
10277 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
10279 This patch fixes a problem that occurs when 2 DIMM's are
10280 used. This problem was first spotted and fixed by Gerald Jackson
10282 problem in a little more clever way.
10284 This patch also adds the nice functionality to dynamically
10285 create the TLB entries for the SDRAM (tlb.c). So we should
10286 never run into such problems with wrong (too short) TLB
10287 initialization again on these platforms.
10289 As this feature is new to the "old" 44x SPD DDR driver, it
10290 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
10294 commit 39218433983417b9df087976a79e3f80dd5e83d6
10296 Date: Wed Mar 7 16:33:44 2007 +0100
10298 UC101: fix compiler warnings
10300 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
10302 Date: Wed Mar 7 16:19:46 2007 +0100
10304 HMI1001: fix build error, cleanup compiler warnings.
10306 commit ad5bb451ade552c44bef9119d907929ebc2c126f
10308 Date: Tue Mar 6 18:08:43 2007 +0100
10310 Restructure POST directory to support of other CPUs, boards, etc.
10312 commit a5284efd125967675b2e9c6ef7b95832268ad360
10314 Date: Tue Mar 6 18:01:47 2007 +0100
10316 Fix HOSTARCH handling.
10317 Patch by Mike Frysinger, Mar 05 2007
10319 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
10321 Date: Tue Mar 6 07:47:04 2007 +0100
10323 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
10325 As provided by the AMCC applications team, this patch optimizes the
10326 DDR2 setup for 166MHz bus speed. The values provided are also save
10327 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
10328 setup has to be adjusted as done in this patch.
10330 For this the NAND booting version had to include the "speed.c" file
10331 from the cpu/ppc4xx directory. With this addition the NAND SPL image
10332 will just fit into the 4kbytes of program space. gcc version 4.x as
10333 provided with ELDK 4.x is needed to generate this optimized code.
10337 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
10339 Date: Sun Mar 4 01:36:05 2007 +0100
10343 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
10345 Date: Wed Feb 28 00:02:04 2007 -0600
10347 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
10349 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
10351 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
10353 Date: Tue Feb 27 23:51:42 2007 -0600
10355 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
10357 The config value for:
10365 Were not being used when setting the appropriate register
10368 * CFG_SCCR_USBMPHCM
10373 To allow full config of the SCCR.
10375 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
10376 that were just bogus.
10380 commit d51b3cf371cd441030460ef19d36b2924c361b1a
10382 Date: Thu Feb 22 20:06:57 2007 -0600
10384 mpc83xx: update [local-]mac-address properties on UEC based devices
10386 8360 and 832x weren't updating their [local-]mac-address
10387 properties. This patch fixes that.
10391 commit 61f4f912acbe60776c5e00df1ec94094ce672957
10393 Date: Tue Feb 13 10:41:42 2007 -0600
10395 mpc83xx: write MAC address to mac-address and local-mac-address
10397 Some device trees have a mac-address property, some have local-mac-address,
10398 and some have both. To support all of these device trees, this patch
10399 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
10400 This function already updates local-mac-address.
10404 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
10406 Date: Tue Feb 27 18:41:08 2007 -0600
10408 mpc83xx: add command line editing by default
10410 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
10412 Date: Wed Feb 14 19:50:53 2007 -0600
10414 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
10416 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
10417 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
10419 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
10424 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
10426 Date: Wed Feb 14 18:27:17 2007 +0800
10428 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
10430 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
10431 it pass DDR/DDR2 compliance tests.
10435 commit b110f40bd180c6b560276589beedf753e97c46ce
10437 Date: Wed Feb 14 18:27:06 2007 +0800
10439 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
10441 MPC8360E rev2.0 have new spridr,and PVR value,
10442 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
10446 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
10448 Date: Wed Feb 14 18:26:44 2007 +0800
10450 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
10452 MPC8349E rev3.1 have new spridr,and PVR value,
10453 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
10457 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
10459 Date: Wed Jan 31 11:04:19 2007 +0100
10461 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
10463 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
10464 which is used to se if an slave will ACK after receiving its address.
10466 Correct i2c probing to use this method as the old method could upset
10467 a slave as it wrote a data byte to it.
10469 Add a small delay in i2c_init() to let the controller
10470 shutdown any ongoing I2C activity.
10474 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
10476 Date: Wed Jan 31 15:54:29 2007 -0600
10478 mpc83xx: Add support for the MPC8349E-mITX-GP
10480 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
10481 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
10482 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
10486 commit fab16807adad350f618024350c6950165c247c72
10488 Date: Wed Jan 31 15:54:20 2007 -0600
10490 mpc83xx: Delete sdram_init() for MPC8349E-mITX
10492 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
10493 never does anything. This patch deletes it.
10497 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
10499 Date: Fri Jan 19 10:43:26 2007 +0800
10501 mpc83xx: Fix the LAW1/3 bug
10503 The patch solves the alignment problem of the local bus access windows to
10504 render accessible the memory bank and PHY registers of UPC 1 (starting at
10505 0xf801 0000). What we actually did was to adjust the sizes of the bus
10506 access windows so that the base address alignment requirement would be met.
10512 commit 97c4b397dce236a7318b304667bf89e59d08b17c
10514 Date: Tue Jan 30 16:15:31 2007 -0600
10516 mpc83xx: don't hang if watchdog configured on 8360, 832x
10518 don't hang if watchdog configured on 8360, 832x
10520 The watchdog programming model is the same across all 83xx devices;
10521 make the code reflect that.
10523 commit b70047478570e371ce7223be342ce98afea0f7d6
10525 Date: Tue Jan 30 16:15:21 2007 -0600
10527 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
10529 protect memcpy to bad address if a local-mac-address is missing from dt
10531 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
10533 Date: Tue Jan 30 16:15:04 2007 -0600
10535 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
10537 make 8360 default environment fdt be 8360 (not 8349)
10539 commit a28899c910024a0226331df07207b1038c300c93
10541 Date: Tue Jan 30 16:14:50 2007 -0600
10543 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
10545 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
10546 be used for busy-waiting since it strips the 'volatile' property from
10547 the bd variable. gcc3 was working by pure luck.
10549 This is a follow on patch to "Fix the UEC driver bug of QE"
10551 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
10553 Date: Tue Jan 30 14:08:30 2007 -0600
10555 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
10557 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
10558 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
10559 CONFIG_MPC834X so they are more generic.
10563 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
10565 Date: Thu Jan 25 13:40:55 2007 -0600
10567 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
10569 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
10571 Date: Wed Jan 24 17:18:37 2007 -0600
10573 mpc83xx: sort Makefile targets
10575 reordered targets alphabetically
10577 commit 91e25769771c1164ed63ffca0add49f934ae3343
10579 Date: Tue Jan 16 11:38:14 2007 -0500
10581 mpc83xx: U-Boot support for Wind River SBC8349
10583 I've redone the SBC8349 support to match git-current, which
10584 incorporates all the MPC834x updates from Freescale since the 1.1.6
10585 release, including the DDR changes.
10587 I've kept all the SBC8349 files as parallel as possible to the
10588 MPC8349EMDS ones for ease of maintenance and to allow for easy
10589 inspection of what was changed to support this board. Hence the SBC8349
10590 U-Boot has FDT support and everything else that the MPC8349EMDS has.
10592 Fortunately the Freescale updates added support for boards using CS0,
10593 but I had to change spd_sdram.c to allow for board specific settings for
10594 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
10595 default if the board doesn't specify a value.)
10597 Hopefully this should be mergeable as-is and require no whitespace
10598 cleanups or similar, but if something doesn't measure up then let me
10599 know and I'll fix it.
10604 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
10606 Date: Thu Dec 14 19:03:21 2006 +0800
10608 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
10610 A redundant semicolon existed in mpc8349itx.c
10615 commit f35f358241c549be3f75cfe2eaa642914275b7ba
10617 Date: Wed Dec 6 21:23:55 2006 -0500
10619 mpc83xx: Put the version (and magic) after the HRCW.
10621 Put the version (and magic) after the HRCW. This puts it in a fixed
10622 location in flash, not at the start of flash but as close as we can get.
10626 commit 48aecd969171a6e99a55fae04933857787f9a5bd
10628 Date: Thu Dec 7 21:14:51 2006 +0800
10630 mpc83xx: Add the MPC832XEMDS board readme
10632 Add the MPC832XEMDS board readme
10636 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
10638 Date: Thu Dec 7 21:13:15 2006 +0800
10640 mpc83xx: Add support for the MPC832XEMDS board
10642 This patch supports DUART, ETH3/4 and PCI etc.
10646 commit e080313c32322e15ab5a18eb896a252858c57284
10648 Date: Thu Dec 7 21:11:58 2006 +0800
10650 mpc83xx: streamline the 83xx immr head file
10652 For better format and style, I streamlined the 83xx head files,
10653 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
10654 duplicated macro definition appear in the both files; 2) the structure
10655 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
10656 macro definition put inside the each structure. So, I cleaned up the
10657 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
10658 moved the macro definition to mpc83xx.h, Just like MPC8260.
10662 *streamline the 83xx immr head file
10666 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
10668 Date: Wed Dec 6 11:38:17 2006 +0800
10670 mpc83xx: Fix the UEC driver bug of QE
10672 The patch prevents the GCC tool chain from striping useful code for
10673 optimization. It will make UEC ethernet driver workable, Otherwise the
10674 UEC will fail in tx when you are using gcc4.x. but the driver can work
10675 when using gcc3.4.3.
10679 *Prevent the GCC from striping code for optimization, Otherwise the UEC
10680 will tx failed when you are using gcc4.x.
10684 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
10686 Date: Thu Mar 1 21:11:36 2007 +0100
10688 [PATCH] Update AMCC Katmai 440SPe eval board support
10690 This patch updates the recently added Katmai board support. The biggest
10691 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
10694 Please note, that still some problems are left with some memory
10695 configurations. See the driver for more details.
10699 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
10701 Date: Thu Mar 1 07:03:25 2007 +0100
10703 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
10707 commit ccbc7036648e465697ca298ba51e0e76dda352a0
10709 Date: Wed Feb 28 01:28:53 2007 +0100
10711 SC3: fix typo in default environment
10713 commit e344568b1b46af85ec32d815586f91bc115d6223
10715 Date: Tue Feb 27 20:15:30 2007 +0300
10717 MCC200: Fixes for update procedure
10719 - fix logic error in image type handling
10720 - make sure file system images (cramfs etc.) get stored in flash
10721 with image header stripped so they can be mounted through MTD
10723 commit 743571145b37182757d4e688a77860b36ee77573
10725 Date: Tue Feb 27 14:26:04 2007 +0100
10727 Minor code cleanup.
10729 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
10731 Date: Tue Feb 27 12:40:16 2007 +0300
10733 MCC200 update - add LCD Progress Indicator
10735 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
10737 Date: Thu Feb 22 07:43:34 2007 +0100
10739 [PATCH] get_dev() now unconditionally uses manual relocation
10741 Since the relocation fix is not included yet and we're not sure how
10742 it will be added, this patch removes code that required relocation
10743 to be fixed for now.
10747 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
10749 Date: Thu Feb 22 07:40:23 2007 +0100
10751 [PATCH] Change systemace driver to select 8 & 16bit mode
10753 As suggested by Grant Likely this patch enables the Xilinx SystemACE
10754 driver to select 8 or 16bit mode upon startup.
10758 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
10760 Date: Wed Feb 21 16:52:31 2007 +0100
10762 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
10764 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
10765 is fully finished. The sync() is defined in each CPU's io.h file. For
10766 those CPUs which do not need sync for now, a dummy sync() is defined in
10767 their io.h as well.
10771 commit da04995c7dc6772013a9a0dc5c767f190c402478
10773 Date: Wed Feb 21 13:44:34 2007 +0100
10775 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
10779 commit 751bb57107d78978ae08e697c3deba816f5be091
10781 Date: Tue Feb 20 13:21:57 2007 +0100
10783 [PATCH] Fix relocation problem with "new" get_dev() function
10785 This patch enables the "new" get_dev() function for block devices
10786 introduced by Grant Likely to be used on systems that still suffer
10787 from the relocation problems (manual relocation neede because of
10788 problems with linker script).
10790 Hopefully we can resolve this relocation issue soon for all platform
10791 so we don't need this additional code anymore.
10795 commit d93e2212f962668b3dce091ff5edc33f2347fe37
10797 Date: Tue Feb 20 13:17:42 2007 +0100
10799 [PATCH] Update SystemACE driver for 16bit access
10801 This patch removes some problems when the Xilinx SystemACE driver
10802 is used with 16bit access on an big endian platform (like the
10807 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
10809 Date: Tue Feb 20 13:15:40 2007 +0100
10811 [PATCH] Clean up Katmai (440SPe) linker script
10815 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
10817 Date: Tue Feb 20 10:57:08 2007 +0100
10819 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
10823 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
10825 Date: Tue Feb 20 10:51:26 2007 +0100
10827 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
10829 This patch switches to the desired I2C bus when the date/dtt
10830 commands are called. This can be configured using the
10831 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
10835 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
10837 Date: Tue Feb 20 10:43:34 2007 +0100
10839 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
10841 This patch adds support for the DDR2 controller used on the
10842 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
10843 board and works fine with the following DIMM modules:
10845 - Corsair CM2X512-5400C4 (512MByte per DIMM)
10846 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
10847 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
10849 This patch also adds the nice functionality to dynamically
10850 create the TLB entries for the SDRAM (tlb.c). So we should
10851 never run into such problems with wrong (too short) TLB
10852 initialization again on these platforms.
10856 commit 36d830c9830379045f5daa9f542ac1c990c70068
10858 Date: Tue Feb 20 10:35:42 2007 +0100
10860 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
10862 Since the existing 4xx SPD SDRAM initialization routines for the
10863 405 SDRAM controller and the 440 DDR controller don't have much in
10864 common this patch splits both drivers into different files.
10866 This is in preparation for the 440 DDR2 controller support (440SP/e).
10870 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
10872 Date: Tue Feb 20 10:27:08 2007 +0100
10874 [PATCH] PPC4xx: Add support for multiple I2C busses
10876 This patch adds support for multiple I2C busses on the PPC4xx
10877 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
10878 to make use of this feature.
10880 It also merges the 405 and 440 i2c header files into one common
10883 Also the 4xx i2c reset procedure is reworked since I experienced
10884 some problems with the first access on the 440SPe Katmai board.
10888 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
10890 Date: Tue Feb 20 09:05:45 2007 +0100
10892 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
10894 Block device read/write is anonymous data; there is no need to use a
10895 typed pointer. void * is fine. Also add a hook for block_read functions
10899 commit 53758fa20e935cc87eeb0519ed365df753a6f289
10901 Date: Tue Feb 20 09:05:38 2007 +0100
10903 [PATCH 8_9] Add block_write hook to block_dev_desc_t
10905 Preparation for future patches which support block device writing
10909 commit f4852ebe6ca946a509667eb68be42026f837be76
10911 Date: Tue Feb 20 09:05:31 2007 +0100
10913 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
10915 Register read/write does not need to be wrapped in a full function. The
10916 patch replaces them with macros.
10920 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
10922 Date: Tue Feb 20 09:05:23 2007 +0100
10924 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
10926 The code in this file is not a command; it is a device driver. Put it in
10927 the correct place. There are zero functional changes in this patch, it
10928 only moves the file.
10932 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
10934 Date: Tue Feb 20 09:05:16 2007 +0100
10936 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
10938 This patch is in preparation of additional changes to the sysace driver.
10939 May as well take this opportunity to fixup the inconsistent whitespace since
10940 this file is about to undergo major changes anyway.
10942 There are zero functional changes in this patch. It only cleans up the
10947 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
10949 Date: Tue Feb 20 09:05:07 2007 +0100
10951 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
10953 isprint is already defined in ctype.c
10957 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
10959 Date: Tue Feb 20 09:05:00 2007 +0100
10961 [PATCH 3_9] Move buffer print code from md command to common function
10963 Printing a buffer is a darn useful thing. Move the buffer print code
10964 into print_buffer() in lib_generic/
10968 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
10970 Date: Tue Feb 20 09:04:52 2007 +0100
10972 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
10974 Change the xilinx device drivers and board code to include config.h
10975 instead of xparameters.h directly. config.h always includes the
10976 correct xparameters file. This change reduces the posibility of
10977 including the wrong file when adding a new xilinx board port
10981 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
10983 Date: Tue Feb 20 09:04:34 2007 +0100
10985 [PATCH 1_4] Merge common get_dev() routines for block devices
10987 Each of the filesystem drivers duplicate the get_dev routine. This change
10988 merges them into a single function in part.c
10992 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
10994 Date: Mon Feb 19 23:09:51 2007 +0100
10996 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
10997 as root file system images.
10999 commit 489c696ae7211218961d159e43e722d74c36fcbc
11001 Date: Wed Feb 14 14:30:28 2007 +0300
11003 MCC200: Extensions to Software Update Mechanism
11005 Update / extend Software Update Mechanism for MCC200 board:
11007 - Add support for rootfs image added. The environment variables
11008 "rootfs_st" and "rootfs_nd" can be used to override the default
11009 values of the image start and end.
11010 - Remove excessive key check code.
11013 commit 4be23a12f23f1372634edc3215137b09768b7949
11015 Date: Mon Feb 19 08:23:15 2007 +0100
11017 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
11019 As spotted by Matthias Fuchs, the READY input should not be
11020 enabled for the NOR FLASH on the Sequoia board.
11024 commit 2605e90bf676d48123afe5719a846d2b52b24aac
11026 Date: Fri Feb 16 07:57:42 2007 +0100
11028 [PATCH] Added support for the jupiter board.
11032 commit 497d012e5be0194e1084073d0081eb1a844796b2
11034 Date: Mon Feb 12 13:11:50 2007 +0100
11036 LPC2292: patch from Siemens.
11038 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
11040 Date: Sat Feb 10 08:49:31 2007 +0100
11042 [PATCH] Add missing p3mx.h file to repository (ups)
11046 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
11048 Date: Fri Feb 9 10:45:42 2007 +0100
11050 [Motion-PRO] Preliminary support for the Motion-PRO board.
11052 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
11054 Date: Wed Feb 7 16:51:08 2007 +0100
11056 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
11058 Some boards that can have more than 768MBytes of SDRAM need to
11059 set "initrd_high", so that the initrd can be accessed by the
11064 commit 7372ca68227930d03cffa548310524cad5b96733
11066 Date: Fri Feb 2 12:44:22 2007 +0100
11068 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
11070 Previously the strapping DCR/SDR was read to determine if the internal PCI
11071 arbiter is enabled or not. This strapping bit can be overridden, so now
11072 the current status is read from the correct DCR/SDR register.
11076 commit 2aa54f651a42d198673318f07a20c89a43e4d197
11078 Date: Fri Feb 2 12:42:08 2007 +0100
11080 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
11084 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
11086 Date: Thu Feb 1 13:22:41 2007 +0100
11088 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
11090 When PCI PNP is enabled the pci pnp configuration routine is called
11091 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
11092 problems with some PCI cards. For now disable the PCI PNP configuration.
11096 commit 2902fadade3be7659467e8d074048c6b7068f5c0
11098 Date: Wed Jan 31 16:56:10 2007 +0100
11100 [PATCH] Update 440EPx/440GRx cpu detection
11104 commit d5ea287b02a6945c3977410e364a879dd1a555c8
11106 Date: Wed Jan 31 16:38:04 2007 +0100
11108 [PATCH] Update esd cpci5200 files
11112 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
11114 Date: Wed Jan 31 16:37:34 2007 +0100
11116 [PATCH] Add support for esd mecp5200 board
11120 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
11122 Date: Wed Jan 31 12:38:50 2007 +0100
11124 [PATCH] Remove unneccessary yellowstone board config file
11128 commit e802594b6fa1b166308820c276b96dc0d7cc731c
11130 Date: Tue Jan 30 17:06:10 2007 +0100
11132 [PATCH] Update Sequoia (440EPx) config file
11134 The config file now handles the 2nd target, the Rainier (440GRx)
11135 evaluation board better. Additionally the PPC input clock was
11136 adjusted to match the correct value of 33.0 MHz.
11140 commit 700200c67e73b83751418abe7815840dca8fd6cb
11142 Date: Tue Jan 30 17:04:19 2007 +0100
11144 [PATCH] Merge Yosemite & Yellowstone board ports
11146 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
11147 share one config file and all board specific files. This way we
11148 don't have to maintain two different sets of files for nearly
11153 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
11155 Date: Tue Jan 30 15:01:49 2007 +0100
11157 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
11159 SCPU doesn't use redundant environment in flash.
11163 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
11165 Date: Tue Jan 30 12:51:07 2007 +0100
11167 [PATCH] alpr: Update alpr board config file
11171 commit f8db84f132b1e335f20f96138a1f09ed97b08664
11173 Date: Tue Jan 30 00:50:40 2007 +0100
11175 LPC2292 SODIMM port coding style cleanup.
11177 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
11179 Date: Wed Jan 24 12:16:56 2007 +0100
11181 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
11183 commit 2daf046ba627f85f44195815778140039636244e
11185 Date: Tue Jan 23 17:22:06 2007 +0100
11187 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
11189 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
11191 Date: Tue Jan 23 14:21:14 2007 +0100
11193 [iDMR] Flash driver on initialisation write-protects some sectors,
11194 currently sectors 0-3. Sector 3 does not need to be protected, though
11195 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
11196 fixes this, i.e., only sectors 0-2 are protected.
11198 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
11200 Date: Tue Jan 23 14:11:22 2007 +0100
11202 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
11203 "mii device" results in "Unexpected exception"). Fixing this properly
11204 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
11205 this commit disables MII commads for now.
11207 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
11209 Date: Tue Jan 23 13:25:22 2007 +0100
11211 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
11212 Identification Register (CIR).
11214 commit fdef388758506765d4d6a7155c8f1584c63ff581
11216 Date: Mon Jan 22 13:19:21 2007 +0800
11218 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
11220 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
11223 commit a4012396645533aef218354eeba754dff0deace8
11225 Date: Fri Jan 19 23:08:39 2007 +0100
11227 Minor code cleanup.
11229 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
11231 Date: Fri Jan 19 19:57:10 2007 +0100
11233 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
11237 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
11239 Date: Fri Jan 19 18:05:26 2007 +0100
11241 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
11242 if you must swap the bytes between reading/writing.
11243 (Needed for the SC3 board)
11247 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
11249 Date: Thu Jan 18 16:05:47 2007 +0100
11251 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
11255 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
11257 Date: Thu Jan 18 11:54:52 2007 +0100
11259 [PATCH] Update Prodrive P3Mx support
11263 commit 34167a36c29ee946b727465db5c014746a08e978
11265 Date: Thu Jan 18 11:48:10 2007 +0100
11267 [PATCH] Add missing Taishan config file
11271 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
11273 Date: Thu Jan 18 11:28:51 2007 +0100
11275 [PATCH] Fix: Compilerwarnings for SC3 board.
11276 The EBC Configuration Register is now by CFG_EBC_CFG definable
11277 Added JFFS2 support for the SC3 board.
11281 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
11283 Date: Thu Jan 18 10:25:34 2007 +0100
11285 [PATCH] Add support for AMCC Taishan PPC440GX eval board
11289 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
11291 Date: Tue Jan 16 18:30:50 2007 +0100
11293 Raname solidcard3 into sc3; add redundant env for sc3
11295 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
11297 Date: Tue Jan 16 12:46:35 2007 +0100
11299 Update default environment for Solidcard3
11301 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
11303 Date: Mon Jan 15 09:46:29 2007 +0100
11305 [PATCH] Fix 440SPe rev B detection from previous patch
11309 commit a443d31410c571ee8f970da819a44d698fdd6b1f
11311 Date: Sun Jan 14 13:35:31 2007 +0100
11313 [FIX] correct I2C Writes for the LM81 Sensor.
11317 commit 0bba5452835f19a61204edcda3a58112fd8e2208
11319 Date: Sat Jan 13 11:17:10 2007 +0100
11321 Undo commit 3033ebb2: reset command does not take any arguments
11323 Haiying Wang's modification to the reset command was broken, undo it.
11327 commit 95981778cff0038fd9941044d6a3eda810e33258
11329 Date: Sat Jan 13 08:01:03 2007 +0100
11331 [PATCH] Update 440SP(e) cpu revisions
11333 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
11337 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
11339 Date: Sat Jan 13 07:59:56 2007 +0100
11341 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
11343 Now the board revision and the current PCI bus speed are printed after
11346 Also the EBC initialising is now done via defines in the board config
11351 commit 36adff362c2c0141ff8a810d42a7e478f779130f
11353 Date: Sat Jan 13 07:59:19 2007 +0100
11355 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
11357 Now the board revision and the current PCI bus speed are printed after
11360 Also the EBC initialising is now done via defines in the board config
11365 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
11367 Date: Sat Jan 13 07:57:51 2007 +0100
11369 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
11371 Now the board revision and the current PCI bus speed are printed after
11376 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
11378 Date: Thu Jan 11 15:44:44 2007 +0100
11380 Added support for the SOLIDCARD III board from Eurodesign
11384 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
11386 Date: Wed Jan 10 14:41:14 2007 +0100
11388 Adjusted default environment for cam5200 board.
11390 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
11392 Date: Wed Jan 10 15:35:52 2007 +0100
11396 commit 787fa15860a57833e50bd30555079a9cd4e519b8
11398 Date: Wed Jan 10 01:28:39 2007 +0100
11400 Fix auto_update for MCC200 board.
11402 The invocation of do_auto_update() is moved to the end of the
11403 misc_init_r() function, after the flash mappings have been
11404 initialized. Please find attached a patch that implements that
11407 Also correct the decoding of the keypad status. With this update, the
11408 key that will trigger the update is Column 2, Row 2.
11410 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
11412 Date: Wed Jan 10 00:26:15 2007 +0100
11414 CAM5200 flash driver modifications:
11415 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
11416 - add second build target 'cam5200_niosflash' which still uses custom driver
11418 commit 67fea022fa957f59653b5238c7496f80a6b70432
11420 Date: Tue Jan 9 16:02:48 2007 +0100
11422 SPC1920: cleanup memory contoller setup
11424 commit 8fc2102faa23593c80381437c09f7745a14deb40
11426 Date: Tue Jan 9 14:57:14 2007 +0100
11428 Fix the cpu speed setup to work with all boards.
11430 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
11432 Date: Tue Jan 9 14:57:13 2007 +0100
11434 SPC1920: add support for the FM18L08 Ramtron FRAM
11436 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
11438 Date: Tue Jan 9 14:57:13 2007 +0100
11440 SPC1920: update the HPI register addresses to work with the second
11441 generation of hardware
11443 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
11445 Date: Tue Jan 9 14:57:13 2007 +0100
11447 Miscellanious spc1920 related cleanups
11449 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
11451 Date: Tue Jan 9 14:57:12 2007 +0100
11453 SPC1920 GO/NOGO led should be set to color red in U-Boot
11455 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
11457 Date: Tue Jan 9 14:57:12 2007 +0100
11459 Add support for the DS3231 RTC
11461 commit 8139567b60d678584b05f0718a681f2047c5e14f
11463 Date: Tue Jan 9 14:57:11 2007 +0100
11465 SMC1 uses external CLK4 instead of BRG on spc1920
11467 commit d8d9de1a02fbd880b613d607143d1f57342affc7
11469 Date: Tue Jan 9 14:57:10 2007 +0100
11471 Update the SPC1920 CMB PLD driver
11473 commit 3f34f869162750e5e999fd140f884f5de952bcfe
11475 Date: Tue Jan 9 14:57:10 2007 +0100
11477 Add / enable I2C support on the spc1920 board
11479 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
11481 Date: Tue Jan 9 14:57:10 2007 +0100
11483 Add support for the tms320671x host port interface (HPI)
11485 commit f4eb54529bb3664c3a562e488b460fe075f79d67
11487 Date: Sun Jan 7 00:13:11 2007 +0100
11489 Prepare for release 1.2.0
11491 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
11493 Date: Sat Jan 6 15:58:09 2007 +0100
11495 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
11497 This patch fixes a problem with an incorrect setup for the refresh
11498 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
11502 commit f16c1da9577f06c5fc08651a4065537407de4635
11504 Date: Sat Jan 6 15:56:13 2007 +0100
11506 [PATCH] Update ALPR board files
11508 This update brings the ALPR board support to the newest version.
11509 It also fixes a problem with the NAND driver.
11513 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
11515 Date: Fri Jan 5 11:46:05 2007 +0100
11517 [PATCH] nand: Fix problem with oobsize calculation
11521 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
11522 returns a 0x15. In the code fragment below bits [1:0] determine the
11523 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
11524 next field is also ANDed with 0x3. However this is a one bit field
11525 as defined in the Hynix and Samsung parts in the 4th ID byte that
11526 determins the oobsize, not a two bit field. It works on Samsung as
11527 bits[3:2] are 01. However for the Hynix there is a 11 in these two
11528 bits, so the oob size gets messed up.
11530 I checked the correct linux code and the suggested fix from Brian is
11531 also available in the linux nand mtd driver.
11535 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
11537 Date: Fri Jan 5 10:40:36 2007 +0100
11539 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
11541 This fix will make the MAL burst disabling patch for the Linux
11542 EMAC driver obsolete.
11546 commit 023889838282b6237b401664f22dd22dfba2c066
11548 Date: Fri Jan 5 10:38:05 2007 +0100
11550 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
11552 This code will optimize the DDR2 controller setup on a board specific
11555 Note: This code doesn't work right now on the NAND booting image for the
11556 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
11560 commit cce4acbb68398634b8d011ed7bb0d12269c84230
11562 Date: Thu Dec 28 19:08:21 2006 +0100
11565 - fix a typo in V38B config file
11566 - move watchdog initialisation earlier in the boot process
11567 - add "wdt=off" to default kernel command line (disables kernel watchdog)
11569 commit 92eb729bad876725aeea908d2addba0800620840
11571 Date: Wed Dec 27 01:26:13 2006 +0100
11573 Fix bug in adaption of Stefano Babic's CFI driver patch.
11575 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
11577 Date: Sun Dec 24 01:42:57 2006 +0100
11579 Minor code cleanup.
11581 commit d784fdb05900ada3686d5778783e1fb328e9fb66
11583 Date: Tue Dec 12 00:22:42 2006 +0100
11585 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
11587 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
11589 Date: Fri Dec 22 14:29:40 2006 +0100
11591 [PATCH] Fix sequoia flash autodetection (finally correct)
11593 Now 32MByte and 64MByte FLASH is know to work and other
11594 configurations should work too.
11598 commit 82e5236a8b719543643fd26d5827938ab2b94818
11600 Date: Fri Dec 22 10:30:26 2006 +0100
11602 Minor code cleanup; update CHANGELOG.
11604 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
11606 Date: Thu Dec 21 17:17:02 2006 +0100
11608 Added support for the TQM8272 board from TQ
11612 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
11614 Date: Thu Dec 21 16:14:48 2006 +0100
11616 [PATCH] Add support for the UC101 board from MAN.
11620 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
11622 Date: Wed Dec 20 00:29:43 2006 +0100
11624 Fix to make the baudrate changes immediate for the MCF52x2 family.
11626 commit daa6e418bcc0c717752e8de939c213c790286096
11628 Date: Wed Dec 20 00:27:32 2006 +0100
11630 Preliminary support for the iDMR board (ColdFire).
11632 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
11634 Date: Fri Dec 8 16:23:08 2006 +0100
11636 automatic update mechanism
11638 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
11640 Date: Mon Dec 4 17:56:59 2006 +0800
11642 Slight code clean up.
11643 Add comments, delete duplicate define and remove spaces.
11646 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
11648 Date: Mon Dec 4 17:54:21 2006 +0800
11650 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
11651 multiplier table can not refect the real PLL clock behavior of these
11652 processors. Please refer to the hardware specification for detailed
11653 information of the corresponding processors.
11656 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
11658 Date: Mon Dec 4 14:46:23 2006 +0800
11660 Remove the static MAC address, ip address, server ip, netmask and
11661 gateway ip for network setting.
11664 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
11666 Date: Mon Dec 4 14:33:08 2006 +0800
11668 Remove the duplicate memory test code for mpc744ihpc2 board.
11669 If a memory test is needed, please use the functions in
11670 post/memory.c or memtest command.
11673 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
11675 Date: Fri Dec 1 19:01:25 2006 +0800
11677 Fix the exception occuring in RAM table search issue.
11678 The original search_one_table() function code can only processes the search
11679 for the exception occurring in FLASH/ROM, because the exception and fixup
11680 table usually locate in FLASH. If the exception address is also in
11681 FLASH, it will be OK.
11682 If the exception occurs in RAM, after the u-boot relocation, a
11683 relocation offset should be added.
11685 clean up the code in cpu/74xx_7xx/cpu.c
11689 commit ee311214e0d216f904feea269599d0934bf71f23
11691 Date: Fri Dec 1 11:47:36 2006 +0800
11693 Clean up the code according to codestyle:
11694 (1) remove some C++ comments.
11695 (2) remove trailing white space.
11696 (3) remove trailing empty line.
11697 (4) Indentation by table.
11698 (5) remove {} in one line condition.
11699 (6) add space before '(' in function call.
11700 Remove some weird printf () output.
11701 Add necessary comments.
11702 Modified Makefile to support building in a separate directory.
11704 commit dd520bf314c7add4183c5191692180f576f96b60
11706 Date: Thu Nov 30 18:02:20 2006 +0100
11710 commit 8d9a8610b8256331132227e9e6585c6bd5742787
11712 Date: Thu Nov 30 01:54:07 2006 +0100
11714 Code cleanup. Update CHANGELOG.
11716 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
11718 Date: Wed Nov 29 16:23:42 2006 +0100
11720 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
11722 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
11723 not the XLB frequency.
11725 This patch depends on the previous patches for MPC52xx device tree support
11730 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
11732 Date: Wed Nov 29 15:42:37 2006 +0100
11734 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
11736 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
11737 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
11738 quite similar and share the same board directory "prodrive/p3mx"
11739 and the same config file "p3mx.h".
11743 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
11745 Date: Wed Nov 29 12:53:15 2006 +0100
11747 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
11749 In the bootvx command the load address was only read from the env
11750 variable "loadaddr" and not optionally passed as paramter as described
11751 in the help. This is fixed with this patch. The behaviour is now the
11752 same as in the bootelf command.
11756 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
11758 Date: Wed Nov 29 12:03:57 2006 +0100
11760 [PATCH] include/ppc440.h minor error affecting interrupts
11762 Fixed include/ppc440.c for UIC address Bug
11764 Corrects bug affecting the addresses for the universal interrupt
11765 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
11770 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
11772 Date: Tue Nov 28 16:17:27 2006 -0600
11774 Make fsl-i2c not conflict with SOFT I2C
11778 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
11780 Date: Tue Nov 28 16:17:18 2006 -0600
11782 Fix I2C master address initialization.
11786 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
11788 Date: Tue Nov 28 23:31:19 2006 -0600
11790 Assign maintainers for mpc8349emds and mpc8360emds
11792 Dave for mpc8360emds, and me for mpc8349emds.
11794 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
11796 Date: Tue Nov 28 23:28:33 2006 -0600
11798 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
11800 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
11801 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
11803 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
11805 Date: Tue Nov 28 12:09:35 2006 -0600
11807 mpc83xx: Miscellaneous code style fixes
11809 Implement various code style fixes and similar changes.
11813 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
11815 Date: Tue Nov 28 17:55:49 2006 +0100
11817 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
11819 This patch adds the code and configuration necessary to boot with an
11820 arch/powerpc Linux kernel.
11825 commit e732faec95a83cb468b4850ae807c8301dde8f6a
11827 Date: Tue Nov 28 16:09:24 2006 +0100
11829 [PATCH] PPC4xx: 440SP Rev. C detection added
11833 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
11835 Date: Tue Nov 28 11:04:45 2006 +0100
11837 [PATCH] nand: Fix patch merge problem
11841 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
11843 Date: Tue Nov 28 11:04:45 2006 +0100
11845 [PATCH] nand: Fix patch merge problem
11849 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
11851 Date: Mon Nov 27 22:53:53 2006 +0100
11855 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
11857 Date: Mon Nov 27 17:43:25 2006 +0100
11859 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
11861 Patch below corrects the setting of the zmiifer register, it was
11862 overwritting the register rather than ORing the settings.
11867 commit d1a72545296800b7e219f93104ad5836f0003d66
11869 Date: Mon Nov 27 17:34:10 2006 +0100
11871 [PATCH] Select NAND embedded environment from board configuration
11873 The current NAND Bootloader setup forces the environment
11874 variables to be in line with the bootloader. This change
11875 enables the configuration to be made in the board include
11876 file instead so that it can be individually enabled.
11881 commit 15784862857c3c2214498defcfed84ff137fb81e
11883 Date: Mon Nov 27 17:22:19 2006 +0100
11885 [PATCH] nand_wait() timeout fixes
11887 Two fixes for the nand_wait() function in
11888 drivers/nand/nand_base.c:
11890 1. Use correct timeouts. The original timeouts in Linux
11891 source are 400ms and 20ms not 40s and 20s
11893 2. Return correct error value in case of timeout. 0 is
11899 commit da5553b095bf04f4f109ad7e565dae3aba47b230
11901 Date: Mon Nov 27 17:04:06 2006 +0100
11903 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
11905 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
11906 arguments to bootm. It removes the getenv("disable_of") test that used
11907 to be used for this purpose.
11912 commit a9398e018593782c5fa7d0741955fc1256b34c1e
11914 Date: Mon Nov 27 15:32:42 2006 +0100
11916 Minor code cleanup. Update CHANGELOG.
11918 commit 1729b92cde575476684bffe819d0b7791b57bff2
11920 Date: Mon Nov 27 14:52:04 2006 +0100
11922 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
11926 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
11928 Date: Mon Nov 27 14:49:51 2006 +0100
11930 [PATCH] alpr: remove unused board specific flash driver
11934 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
11936 Date: Mon Nov 27 14:48:41 2006 +0100
11938 [PATCH] 4xx: Fix problem with board specific reset code
11942 commit ec0c2ec725aec9524a177a77ce75559e644a931a
11944 Date: Mon Nov 27 14:46:06 2006 +0100
11946 [PATCH] Remove testing 4xx enet PHY setup
11950 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
11952 Date: Mon Nov 27 14:12:17 2006 +0100
11954 [PATCH] Update Prodrive ALPR board support (440GX)
11958 commit 58b485776698c3d71ec5a215e392123b4c15afa3
11960 Date: Mon Nov 27 11:51:21 2006 +0100
11962 Add a small README with information on the generic ohci driver.
11964 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
11966 Date: Mon Nov 27 11:46:46 2006 +0100
11968 Fix some endianness issues related to the generic ohci driver
11970 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
11972 Date: Mon Nov 27 11:44:58 2006 +0100
11974 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
11975 to choose between the old and the generic OHCI drivers.
11977 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
11979 Date: Mon Nov 27 11:43:09 2006 +0100
11981 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
11982 and adapted board configs TQM5200 and yosemite accordingly. This commit
11983 also makes the maximum number of root hub ports configurable
11984 (CFG_USB_OHCI_MAX_ROOT_PORTS).
11986 commit 78d620ebb5871d252270dedfad60c6568993b780
11988 Date: Thu Nov 23 22:58:58 2006 +0100
11990 Updates for TQM5200 modules:
11991 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
11992 - simplify "udate" definitions
11994 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
11996 Date: Wed Nov 22 13:20:50 2006 +0100
11998 [PATCH] PPC4xx start.S: Fix for processor errata
12000 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
12001 errata 1.12: 440_33 by moving patch up in code.
12006 commit 4ef6251403f637841000e0fef9e832aa01339822
12008 Date: Mon Nov 20 20:39:52 2006 +0100
12010 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
12014 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
12016 Date: Mon Nov 20 10:28:30 2006 +0100
12020 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
12022 Date: Mon Nov 13 13:55:24 2006 +0100
12024 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
12026 * Adds support for AMD command set Top Boot flash geometry reversal
12027 * Adds support for reading JEDEC Manufacturer ID and Device ID
12028 * Adds support for displaying command set, manufacturer id and
12029 device ids (flinfo)
12030 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
12031 * Removes outdated change history (refer to git log instead)
12036 commit b21b511d4c50408f4853f46f06b601272196223f
12038 Date: Sun Nov 12 21:13:23 2006 +0100
12042 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
12044 Date: Sat Nov 11 22:48:22 2006 +0100
12046 Disable the watchdog in the default config for the V38B board.
12048 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
12050 Date: Sat Nov 11 22:43:00 2006 +0100
12052 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
12053 group is enabled for USB earlier (in cpu_init_f() instead of
12054 usb_lowlevel_init()).
12056 commit 91650b3e4de688038d4f71279c44858e3e2c6870
12058 Date: Mon Nov 6 17:06:36 2006 +0100
12060 Sequential accesses to non-existent memory must be synchronized,
12061 at least on G2 cores.
12063 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
12065 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
12067 Date: Fri Nov 3 19:15:00 2006 -0600
12069 mpc83xx: Update 83xx to use fsl_i2c.c
12071 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
12072 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
12073 Added multiple I2C bus support to fsl_i2c.c.
12077 commit d239d74b1c937984bc519083a8e7de373a390f06
12079 Date: Fri Nov 3 12:00:28 2006 -0600
12081 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
12083 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
12084 tree matches the other 8xxx trees.
12088 commit f7fb2e703ec9688541416962724adff70a7322cb
12090 Date: Thu Nov 2 19:47:11 2006 -0600
12092 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
12094 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
12096 Date: Thu Nov 2 18:05:50 2006 -0600
12098 mpc83xx: Fix the incorrect dcbz operation
12100 The 834x rev1.x silicon has one CPU5 errata.
12102 The issue is when the data cache locked with
12103 HID0[DLOCK], the dcbz instruction looks like no-op inst.
12105 The right behavior of the data cache is when the data cache
12106 Locked with HID0[DLOCK], the dcbz instruction allocates
12109 The 834x rev3.0 and later and 8360 have not this bug inside.
12111 So, when 834x rev3.0/8360 are working with ECC, the dcbz
12112 instruction will corrupt the stack in cache, the processor will
12115 However, the 834x rev1.x can work with ECC with these code,
12116 because the sillicon has this cache bug. The dcbz will not
12117 corrupt the stack in cache.
12118 Really, it is the fault code running on fault sillicon.
12120 This patch fix the incorrect dcbz operation. Instead of
12121 CPU FP writing to initialise the ECC.
12124 * Fix the incorrect dcbz operation instead of CPU FP
12125 writing to initialise the ECC memory. Otherwise, it
12126 will corrupt the stack in cache, The processor will checkstop
12131 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
12133 Date: Wed Nov 1 00:10:40 2006 -0600
12135 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
12137 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
12138 STDOUT_PATH configuration bits to mpc8349emds,
12139 mpc8349itx, and mpc8360emds board code.
12141 redo environment to use bootm with the fdtaddr
12142 for booting ARCH=powerpc kernels by default,
12143 and provide default fdtaddr values.
12145 commit 48041365b3420589ad464ebc7752e0053538b729
12147 Date: Wed Nov 1 00:07:25 2006 -0600
12149 mpc83xx: change ft code to modify local-mac-address property
12151 Update 83xx OF code to update local-mac-address properties
12152 for ethernet instead of the obsolete 'address' property.
12154 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
12156 Date: Tue Oct 31 21:23:16 2006 -0600
12158 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
12160 This patch also adds an improved I2C set_speed(), which handles all clock
12165 commit ac4b5622ce050b5ee1e154b98df630d778661632
12167 Date: Tue Oct 31 19:54:59 2006 -0600
12169 mpc83xx: add the README.mpc8360emds
12171 add doc/README.mpc8360emds to accompany the new board support
12173 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
12175 Date: Fri Nov 3 12:11:15 2006 -0600
12177 mpc83xx: add QE ethernet support
12179 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
12181 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
12183 Date: Fri Nov 3 19:33:44 2006 -0600
12185 mpc83xx: Add MPC8360EMDS basic board support
12187 Add support for the Freescale MPC8360EMDS board.
12188 Includes DDR, DUART, Local Bus, PCI.
12190 commit 23892e49352de74f7fac36ff90bb1be143d195e3
12192 Date: Tue Oct 31 19:30:40 2006 -0600
12194 mpc83xx: add the QUICC Engine (QE) immap file
12196 common QE immap file. Also required for 8360.
12198 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
12200 Date: Tue Oct 31 19:25:38 2006 -0600
12202 mpc83xx: Add 8360 specifics to 83xx immap
12204 Mainly add QE device dependencies, with appropriate 8360 protection.
12207 commit 988833324a7fda482c8ac3ca23eb539f8232e404
12209 Date: Tue Oct 31 19:14:41 2006 -0600
12211 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
12213 PREREQUISITE PATCHES:
12215 * This patch can only be applied after the following patches have been applied:
12217 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
12218 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
12222 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
12223 the clock for the 2nd USB board (Linux kernel will hang otherwise),
12224 and fix the CONFIG_BOOTARGS macro.
12228 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
12230 Date: Tue Oct 31 18:44:42 2006 -0600
12232 mpc83xx: Add support for the MPC8349E-mITX
12234 PREREQUISITE PATCHES:
12236 * This patch can only be applied after the following patches have been applied:
12238 1) DNX#2006090742000024 "Add support for multiple I2C buses"
12239 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
12240 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
12241 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
12242 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
12246 * Add support for the Freescale MPC8349E-mITX reference design platform.
12247 The second TSEC (Vitesse 7385 switch) is not supported at this time.
12251 commit 183da6d9b446cc12123455844ad1187e2375626f
12253 Date: Tue Sep 12 10:15:53 2006 -0400
12255 Additional MPC8349 support for multibus i2c
12259 Here is a patch for a file that was accidentally left out of a previous
12262 It accompanies the patch with ticket DNX#2006090742000024
12265 Change PCI initialization to use new multi-bus I2C API.
12270 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
12272 Date: Thu Sep 7 16:51:04 2006 -0400
12274 Multi-bus I2C implementation of MPC834x
12278 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
12279 family and the MPC8349EMDS board in particular.
12280 This patch requires Patch 1 (Add support for multiple I2C buses).
12281 Testing was performed on a 533MHz board.
12283 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
12288 Implemented driver-level code to support two I2C buses on the
12289 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
12290 are 50kHz, 100kHz and 400kHz on each bus.
12295 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
12297 Date: Thu Sep 7 16:50:54 2006 -0400
12299 Add support for multiple I2C buses
12303 Attached is a patch providing support for multiple I2C buses at the
12304 command level. The second part of the patch includes an implementation
12305 for the MPC834x CPU and MPC8349EMDS board.
12307 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
12313 1. Include new 'i2c' command (based on USB implementation) using
12314 CONFIG_I2C_CMD_TREE.
12316 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
12317 the commands to change bus number and speed are only available under the
12318 new 'i2c' command mentioned in the first bullet.
12320 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
12321 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
12322 of an array of bus-device pairs. Otherwise, it is an array of uchar.
12325 Added new 'i2c' master command for all I2C interaction. This is
12326 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
12327 setting I2C bus speed as well as changing the active bus if the board
12328 has more than one (conditionally compiled with
12329 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
12335 commit bed85caf872714ebf53013967a695c9d63acfc68
12337 Date: Tue Oct 31 18:13:36 2006 -0600
12339 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
12343 * Errata DDR6, which affects all current MPC 834x processors, lists changes
12344 required to maintain compatibility with various types of DDR memory. This
12345 patch implements those changes.
12349 commit afd6e470f639883002c7c59d562690a5cb0f4865
12351 Date: Wed Oct 25 18:45:23 2006 -0500
12353 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
12355 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
12357 Date: Tue Aug 22 17:07:00 2006 -0500
12359 mpc83xx: Add support for variable flash memory sizes on 83xx systems
12363 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
12364 window registers, instead of using a hard-coded value of 8MB.
12368 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
12370 Date: Thu Aug 3 18:38:13 2006 +0800
12372 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
12374 Unified TQM834x variable names with 83xx and consolidated macro
12375 in preparation for the 8360 and other upcoming 83xx devices.
12379 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
12381 Date: Wed Oct 25 14:41:21 2006 -0500
12383 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
12385 Incorporated the common unified variable names and the changes in preparation
12386 for releasing mpc8360 patches.
12390 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
12392 Date: Thu Aug 3 18:36:02 2006 +0800
12394 mpc83xx: Fix missing build for mpc8349emds pci.c
12396 Make pci build for mpc8349emds
12400 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
12402 Date: Thu Aug 3 18:39:49 2006 +0800
12404 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
12406 Removed unused file resetvec.S for mpc83xx cpu
12410 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
12412 Date: Sat Sep 30 00:32:59 2006 -0700
12414 NAND Flash verify across block boundaries
12416 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
12418 and the write crosses a block boundary. The pointer to the verification
12419 buffer (bufstart) is not being updated to reflect the starting of the
12421 block so the verification of the second block fails.
12425 * Fix NAND FLASH page verification across block boundaries
12427 commit f484dc791a3932537213c43c654cc1295c64b84c
12429 Date: Thu Sep 7 07:39:46 2006 -0700
12431 Added RGMII support to the TSECs and Marvell 881111 Phy
12433 Added a phy initialization to adjust the RGMII RX and TX timing
12434 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
12438 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
12440 Date: Fri Nov 3 13:10:00 2006 +0800
12442 Remove some unused CFG define.
12443 undef CFG_DRAM_TEST
12445 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
12447 Date: Fri Nov 3 13:07:36 2006 +0800
12449 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
12450 Both work. 0xFF000000 seems more reasonable.
12452 commit c59200443072353044aa4bf737a5a60f9a9af231
12454 Date: Thu Nov 2 15:15:01 2006 +0100
12456 Release U-Boot 1.1.6
12458 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
12460 Date: Thu Nov 2 19:14:48 2006 +0800
12462 This patch comes from Yuli's posted patch on 8/8/2006
12463 titled "CFI Driver Little-Endian write Issue".
12465 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
12467 If that patch applied, please discard this one.
12468 Until now , I do not see his patch is applied. So please apply this one.
12473 commit b825f158e449e1e9cf74c08e572955e122394c96
12475 Date: Thu Nov 2 19:12:31 2006 +0800
12477 Tsi108 on chip i2c support.
12479 The i2c Interface provides a master-only, serial interface that can be
12480 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
12486 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
12488 Date: Thu Nov 2 19:11:06 2006 +0800
12490 Tsi108 on chip pci controller support.
12492 If there is no pci card, the tsi108/109 pci configure read will
12493 cause a machine check exception to the processor. PCI error should
12494 also be cleared after the read.
12499 commit d1927cee977126e547ceeba23e4f978f377cfb8f
12501 Date: Thu Nov 2 19:08:55 2006 +0800
12503 Tundra tsi108 on chip Ethernet controller support.
12505 The following is a brief description of the Ethernet controller:
12506 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
12507 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
12508 to manage the two physical connection devices (PHYs). Each Ethernet port
12509 has its own statistics monitor that tracks and reports key interface
12510 statistics. Each port supports a 256-entry hash table for address
12511 filtering. In addition, each port is bridged to the Switch Fabric
12512 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
12514 Each Ethernet port also has a pair of internal Ethernet DMA channels to
12515 support the transmit and receive data flows. The Ethernet DMA channels
12516 use descriptors set up in memory, the memory map of the device, and
12517 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
12518 handles arbitration for the Switch Fabric. The Controller also
12519 has a register businterface for register accesses and status monitor
12522 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
12523 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
12524 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
12525 data flows to and from the Ethernet Controller through the Switch Fabric.
12527 Each Ethernet port uses its transmit and receive DMA channels to manage
12528 data flows through buffer descriptors that are predefined by the
12529 system (the descriptors can exist anywhere in the system memory map).
12530 These descriptors are data structures that point to buffers filled
12531 with data ready to transmit over Ethernet, or they point to empty
12532 buffers ready to receive data from Ethernet.
12537 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
12539 Date: Thu Nov 2 19:01:33 2006 +0800
12541 Tundra tsi108 header file.
12543 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
12544 PowerPC processors that offers numerous system interconnect options for
12545 embedded application designers. The Tsi108 can interconnect 60x or
12546 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
12547 and Flash. Provided the macro define for tsi108 chip.
12552 commit 87c4db09699c6b89176b31004afcb83eb1585d47
12554 Date: Thu Nov 2 18:59:15 2006 +0800
12556 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
12557 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
12562 commit 27801b8ab11c61b577e45742a515bb3b23b80241
12564 Date: Thu Nov 2 18:57:21 2006 +0800
12566 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
12567 Make ,config.mk and link file for the mpc7448hpc2 board.
12572 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
12574 Date: Thu Nov 2 18:55:04 2006 +0800
12576 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
12577 The mpc7448hpc2 board support header file.
12582 commit 625bb5ddb50b243f931262ca8c46956409471917
12584 Date: Thu Nov 2 18:52:21 2006 +0800
12586 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
12587 The mpc7448hpc2 board support low level assemble language init code.
12592 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
12594 Date: Thu Nov 2 18:49:51 2006 +0800
12596 General code modification for mpc7448hpc2 board support.
12597 1. Add 7447A and 7448 processor support.
12598 2. Add the following flags.
12600 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
12601 (such as by switch on board), this flag should be set.
12603 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
12604 relocates to RAM, this flag should be set.
12606 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
12607 system hang in exception, this flag should be set.
12609 There is a design issue for tsi108/109 pci configure read. When pci scan
12610 the slots, if there is no pci card, the tsi108/9 will cause a machine
12611 check exception for mpc7448 processor.
12616 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
12618 Date: Thu Nov 2 18:34:47 2006 +0800
12620 Add README file for mpc7448hpc2 board.
12623 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
12625 Date: Wed Nov 1 02:04:38 2006 +0100
12627 Finish up support for MarelV38B board
12628 - add watchdog support
12629 - enable GPIO_WKUP_7 pin for input
12632 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
12634 Date: Wed Nov 1 01:45:46 2006 +0100
12636 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
12637 * remove warnings when compiling ethaddr.c
12638 * adjust linker script (fixes a crash resulting from incorrect
12639 definition of __u_boot_cmd_start)
12640 - Some MarelV38B code cleanup.
12642 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
12644 Date: Wed Nov 1 01:38:16 2006 +0100
12646 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
12647 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
12648 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
12649 MPC5XXX_WU_GPIO_DATA_O for affected boards.
12651 - Add defintions for some MPC5XXX GPIO pins.
12653 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
12655 Date: Wed Nov 1 01:34:29 2006 +0100
12657 Changed MarelV38B board make target to lowercase. Config file cleanup.
12659 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
12661 Date: Sun Oct 29 01:03:51 2006 +0200
12663 Automatically adjust ARFLAGS so "make -s" is really silent.
12665 commit fae684e89844856383bdf101440889557df3e6b1
12667 Date: Sat Oct 28 16:45:00 2006 +0200
12669 [PATCH] omap925.c: Remove unused functions
12674 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
12676 Date: Sat Oct 28 17:12:58 2006 +0200
12678 [PATCH] Add some missing machtypes for netstar & voiceblue boards
12680 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
12686 commit 856f054410cef52d868feb330168b2a4c4091328
12688 Date: Sat Oct 28 15:55:52 2006 +0200
12690 [PATCH] NAND: Partition name support added to NAND subsystem
12692 chpart, nboot and NAND subsystem related commands now accept also partition
12693 name to specify offset.
12698 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
12700 Date: Sat Oct 28 02:29:44 2006 +0200
12704 commit 2751a95abd1b96911081c357e96a12fa97b40dee
12706 Date: Sat Oct 28 02:29:14 2006 +0200
12708 Enable commandline editing and hush shell on all TQM boards.
12710 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
12712 Date: Sat Oct 28 02:28:02 2006 +0200
12714 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
12716 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
12718 Date: Sat Oct 28 01:14:32 2006 +0200
12720 Check for illegal character '=' in environment variable names.
12722 Make sure the string passed as variable name does not contain a '='
12723 character. This not only prevents the common error or typing
12724 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
12725 also closes a backdoor which allowed to delete write-protected
12726 environment variables, for example by using "setenv ethaddr=".
12728 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
12730 Date: Sat Oct 28 00:38:39 2006 +0200
12732 Minor code cleanup.
12734 commit e11887a77d81077416a2d1c5e0354916fee8c034
12736 Date: Thu Oct 26 17:55:31 2006 +0200
12738 Don't pass any debug options directly to the assembler
12740 When passing the -g option to gcc, gcc automatically selects a
12741 suitable --g<format> option to pass on to the assembler.
12742 Thus, there's no point in forcing a specific debug option on the
12743 assembler using the -Wa mechanism.
12747 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
12749 Date: Fri Oct 27 07:47:22 2006 -0500
12751 MPC86xx: Cleaned up unused and conditionally used local variables.
12755 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
12757 Date: Fri Oct 27 11:55:21 2006 +0200
12759 Fix "ar" flags in some Makefiles to allow for silent "make -s"
12761 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
12763 Date: Thu Oct 26 14:38:25 2006 -0400
12765 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
12766 to a TSEC (e.g. a switch is connected via RMII) or
12767 if the PHY is defective/incorrectly configured.
12771 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
12773 Date: Thu Oct 26 14:38:25 2006 -0400
12775 Fix TSEC driver: avoid crashes if PHY is not attached
12776 to a TSEC (e.g. a switch is connected via RMII) or
12777 if the PHY is defective/incorrectly configured.
12781 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
12783 Date: Thu Oct 26 16:24:31 2006 +0200
12787 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
12789 Date: Wed Oct 25 15:48:59 2006 +0200
12791 Finish up support for the ATSTK1000/ATSTK1002 boards
12793 Add atstk1002_config target to Makefile and move the AVR32 section
12794 down below Blackfin so that it doesn't end up in the middle of
12797 Drop the autogenerated linker script thing for now. Will have to
12798 revisit how to handle chips with different flash and RAM layout
12803 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
12805 Date: Tue Oct 24 23:47:37 2006 -0500
12807 Added support for Multi-Image files that contain a device tree
12809 If a Multi-Image file contains a third image we try to use it as a
12810 device tree. The device tree image is assumed to be uncompressed in the
12811 image file. We automatically allocate space for the device tree in memory
12812 and provide an 8k pad to allow more than a reasonable amount of growth.
12814 Additionally, a device tree that was contained in flash will now automatically
12815 get copied to system memory as part of boot. Previously an error was
12816 reported if one tried to boot a device tree that was in flash.
12820 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
12822 Date: Tue Oct 24 21:35:55 2006 +0200
12824 Switch to automatically generated CHANGELOG file.
12825 (use "make CHANGELOG" to update it from time to time)
12827 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
12829 Date: Tue Oct 24 18:06:48 2006 +0200
12831 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
12832 Patch by Stefan Roese, 24 Oct 2006
12834 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
12836 Date: Tue Oct 24 17:24:55 2006 +0200
12838 Merge with /home/wd/git/u-boot/master
12840 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
12842 Date: Tue Oct 24 15:32:57 2006 +0200
12846 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
12848 Date: Tue Oct 24 14:51:36 2006 +0200
12850 Move atstk1000 files into vendor specific directory.
12851 Patch by Haavard Skinnemoen, 12 Sep 2006
12853 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
12855 Date: Tue Oct 24 14:42:37 2006 +0200
12857 Add ATSTK1000 and ATSTK1002 board support
12858 Patch by Haavard Skinnemoen, 06 Sep 2006
12860 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
12863 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
12864 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
12865 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
12866 CompactFlash cards. For more information, please see this page:
12868 http://www.atmel.com/dyn/products/tools.asp?family_id=682
12870 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
12875 commit f93ae788c3640fcde5db383471d45548ff4060d0
12877 Date: Tue Oct 24 14:31:24 2006 +0200
12879 Add common serial driver for Atmel AT32 and AT91 chips
12880 Patch by Haavard Skinnemoen, 06 Sep 2006
12882 This is a first attempt at creating a common serial driver for Atmel
12883 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
12884 be possible to support AT91RM9200 and other ARM-based chips with some
12885 minor modifications.
12887 There's nothing fundamentally AVR32-specific in this driver, but it
12888 does use some features which are currently only defined for the
12890 * pm_get_clock_freq: Obtain the clock frequency of a given domain
12891 * gd->console_uart: A "struct device" containing information about
12892 register mappings, gpio resources and clocks associated with the
12895 For more information about these features, please see the "AT32AP
12898 commit 72a087e04705c26cad982879ebd06b5281bf825a
12900 Date: Tue Oct 24 14:27:35 2006 +0200
12902 Add AT32AP CPU and AT32AP7000 SoC support
12903 Patch by Haavard Skinnemoen, 06 Sep 2006
12905 This patch adds support for the AT32AP CPU family and the AT32AP7000
12906 chip, which is the first chip implementing the AVR32 architecture.
12908 The AT32AP CPU core is a high-performance implementation featuring a
12909 7-stage pipeline, separate instruction- and data caches, and a MMU.
12910 For more information, please see the "AVR32 AP Technical Reference":
12912 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
12914 In addition to this, the AT32AP7000 chip comes with a large set of
12915 integrated peripherals, many of which are shared with the AT91 series
12916 of ARM-based microcontrollers from Atmel. Full data sheet is
12919 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
12923 commit 7b64fef33c66be648826c0ff9758298ef13d0604
12925 Date: Tue Oct 24 14:21:16 2006 +0200
12927 Add AVR32 architecture support
12928 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
12930 This patch adds common infrastructure code for the Atmel AVR32
12931 architecture. See doc/README.AVR32 for details.
12935 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
12937 Date: Tue Oct 24 13:57:33 2006 +0200
12939 Use -g instead of -gstabs in AFLAGS_DEBUG
12940 Patch by Haavard Skinnemoen, 30 Aug 2006
12942 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
12943 matter what the target's preferred debugging format is. This patch
12944 simply replaces -gstabs with -g, so that the default debugging format
12945 for the architecture is used.
12947 commit 965829872169c2996023840d98e1d85ad148d629
12949 Date: Tue Oct 24 13:55:18 2006 +0200
12951 Fix/workaround broken dependency handling with make 3.81
12952 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
12954 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
12956 Date: Mon Oct 23 22:17:05 2006 +0200
12958 Fix sequoia separate object direcory building problems.
12960 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
12962 Date: Fri Oct 20 17:16:35 2006 -0500
12964 Use generic I2C register block on 85xx and 86xx.
12966 Replace private IMMAP I2C structures with generic reg block
12967 and allow 86xx to have multiple I2C device busses.
12971 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
12973 Date: Fri Oct 20 15:54:34 2006 -0500
12975 Fix compilation warnings on a few 85xx boards.
12979 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
12981 Date: Fri Oct 20 15:50:15 2006 -0500
12983 Converted all 85xx boards to use a common FSL I2C driver.
12984 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
12985 And removed hard i2c path from a few u-boot.lds scipts too.
12986 Minor whitespace cleanups along the way.
12990 commit 4d45f69e362b05892c9e92a7907e5820995612aa
12992 Date: Thu Oct 19 12:02:24 2006 -0500
12994 Rewrite a series of goto statements as a sequences of
12995 conditional expressions instead.
12997 Use consistent return code 0/-1 for good/bad indicators.
12999 Include one fewer file if the driver isn't used at all.
13003 commit 7237c033b02fe295880435f1eb80819a0c987532
13005 Date: Thu Oct 19 11:02:16 2006 -0500
13007 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
13009 in an effort to begin to unify the umpteen FSL I2C drivers that
13010 are all otherwise very similar.
13014 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
13016 Date: Thu Oct 19 11:33:52 2006 -0500
13018 * Fix a bunch of compiler warnings for gcc 4.0
13022 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
13024 Date: Tue Oct 17 06:14:31 2006 +0200
13026 Add monitor functions for indirect access to PPC440 DCR's
13027 Patch by Leonid Baryudin, 12 Oct 2006
13029 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
13031 Date: Fri Oct 13 16:47:53 2006 -0500
13033 Fixed leading whitespace issues.
13034 Removed spurious LAWAR thing.
13038 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
13040 Date: Thu Oct 12 10:42:36 2006 -0500
13042 Remove unneeded include files and local variable.
13046 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
13048 Date: Tue Oct 10 00:23:32 2006 -0600
13050 Fix possible uninitialized variable compiler warning.
13052 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
13053 do_bootm_linux() may be uninitialized. There is no possibility in the
13054 current code that len will get used uninitialized, but this fix follows
13055 the existing convention of setting both len and data to zero at the same
13060 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
13062 Date: Wed Oct 11 15:13:01 2006 -0500
13064 * Fix a bunch of compiler warnings for gcc 4.0
13068 commit bf651baa365e5447246aad6a633ccd667cf24a39
13070 Date: Wed Oct 11 10:10:43 2006 -0500
13072 Move "ar" flags to config.mk to allow for silent "make -s"
13074 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
13076 Date: Tue Oct 10 17:19:03 2006 -0500
13078 Coding style changes to remove local varible blocks
13079 and reformat a bit nicer.
13081 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
13083 Date: Tue Oct 10 17:16:04 2006 -0500
13085 Fix whitespace issues.
13087 commit 7b382b7125f2397cce63253df62f183e3dfa2770
13089 Date: Tue Oct 10 17:14:45 2006 -0500
13091 Fix whitespace issues.
13093 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
13095 Date: Tue Oct 10 17:06:53 2006 -0500
13097 Fix whitespace issues.
13099 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
13101 Date: Tue Oct 10 17:03:43 2006 -0500
13103 Ran lindent and cleaned up whitespace issues.
13104 Format for 80-columns too.
13106 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
13108 Date: Tue Oct 10 17:02:22 2006 -0500
13110 Fix whitespace and 80-col issues.
13112 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
13114 Date: Sat Oct 7 11:36:51 2006 +0200
13116 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
13117 Patch by Stefan Roese, 07 Oct 2006
13119 commit 5bc528fa4da751d472397b308137238a6465afd2
13121 Date: Sat Oct 7 11:35:25 2006 +0200
13123 Update ALPR code (NAND support working now)
13124 Patch by Stefan Roese, 07 Oct 2006
13126 commit 77d5034847d328753b80c46b83f960a14a26f40e
13128 Date: Sat Oct 7 11:33:03 2006 +0200
13130 Remove compile warnings in fpga code
13131 Patch by Stefan Roese, 07 Oct 2006
13133 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
13135 Date: Sat Oct 7 11:30:52 2006 +0200
13137 Add CONFIG_BOARD_RESET to configure board specific reset function
13138 Patch by Stefan Roese, 07 Oct 2006
13140 commit f55df18187e7a45cb73fec4370d12135e6691ae1
13142 Date: Fri Sep 29 08:23:12 2006 +0100
13144 Fix missing tCycle/modfreq calculation.
13148 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
13150 Date: Wed Sep 13 10:33:35 2006 -0500
13152 Updated config headers to add default FDT-based booting
13154 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
13156 Date: Wed Sep 13 10:34:18 2006 -0500
13158 Add support for eTSEC 3 & 4 on 8548 CDS
13160 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
13161 This will only work on rev 1.3 boards (but doesn't break older boards)
13162 * Cleaned up some comments to reflect the expanded role of tsec
13165 commit 084d648b109c8984f83674043c1a7fa3885ef801
13167 Date: Wed Sep 13 10:33:56 2006 -0500
13169 Added code to support 2.6.18 PCI changes in u-boot
13171 * Added code to swizzle the IRQ map for the PCI
13173 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
13175 Date: Tue Sep 19 09:34:10 2006 -0500
13177 Modified makefile for new build mechanism.
13181 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
13183 Date: Thu Sep 14 08:40:36 2006 -0500
13185 Handle 86xx SVR values according to the new Reference Manual.
13186 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
13187 by the byte in bits 16-23 instead.
13188 Thanks to Jason Jin for noticing.
13192 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
13194 Date: Mon Aug 28 14:25:31 2006 +0800
13196 Fixed an OF-tree off-by-one bug when adding a new property name.
13197 This bug will cause the kernel booting to pause a long time.
13200 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
13202 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
13204 Date: Tue Aug 29 11:05:09 2006 -0500
13206 Remove trailing empty lines.
13208 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
13210 Date: Tue Aug 29 09:48:49 2006 -0500
13212 Remove bogus msync and use volatile asm.
13214 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
13216 Date: Tue Aug 29 08:17:14 2006 -0500
13218 Add myself as maintainer for MPC8641HPCN.
13220 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
13222 Date: Mon Aug 28 14:25:31 2006 +0800
13224 Fixed an OF-tree off-by-one bug when adding a new property name.
13225 This bug will cause the kernel booting to pause a long time.
13229 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
13231 Date: Fri Aug 25 14:38:34 2006 -0400
13233 Change ramdiskaddr and dtbaddr
13234 Remove PEX fluff commands.
13239 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
13241 Date: Wed Aug 23 13:32:45 2006 -0500
13243 * Another small fix for booting with disable_of
13247 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
13249 Date: Wed Aug 23 11:04:43 2006 -0500
13251 Cleanup and lindent new AHCI driver.
13253 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
13255 Date: Wed Aug 23 19:15:12 2006 +0800
13257 Add AHCI define and sata support for MPC8641HPCN board.
13261 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
13263 Date: Wed Aug 23 19:10:44 2006 +0800
13265 Add AHCI support to u-boot
13267 Add AHCI support in u-boot, enable the sata disk controllers which
13268 following the AHCI protocol.
13272 commit d8ea2acf5f137cae99417df4f573d036ee384668
13274 Date: Wed Aug 23 17:54:32 2006 +0800
13276 Add dtb boot-up parameter to default boot commands.
13280 commit b93775c2036b99baa390ea425c4771895bbc63c4
13282 Date: Tue Aug 22 18:26:08 2006 -0500
13284 Cleanup even more poorly introduced whitespace.
13286 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
13288 Date: Tue Aug 22 18:07:00 2006 -0500
13290 Cleanup more poorly introduced whitespace.
13292 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
13294 Date: Tue Aug 22 17:54:05 2006 -0500
13296 Cleanup poorly introduced whitespace.
13298 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
13300 Date: Tue Aug 22 12:25:27 2006 -0500
13302 General indent and whitespace cleanups.
13304 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
13306 Date: Tue Aug 22 12:06:18 2006 -0500
13308 General indent and whitespace cleanups.
13310 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
13312 Date: Tue Aug 22 10:42:21 2006 -0500
13314 Cleanup compiler warnings.
13316 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
13318 Date: Tue Aug 22 09:31:59 2006 -0500
13320 Fix disable_of booting
13324 commit 87a449c8ac396420cb24260f717ea9e6faa82047
13326 Date: Tue Aug 22 09:23:55 2006 -0500
13328 Support for FDT in uImage format, error when using FDT from flash
13332 commit 75c299c38369d01addd5e054b8a16217b70f4a86
13334 Date: Tue Aug 15 15:12:55 2006 -0400
13336 Unlock cache before kernel starts up for MPC86xx
13338 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
13340 Date: Tue Aug 15 15:13:15 2006 -0400
13342 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
13344 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
13346 Date: Tue Aug 15 15:12:55 2006 -0400
13348 Unlock cache before kernel starts up for MPC86xx
13350 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
13352 Date: Tue Aug 15 15:13:15 2006 -0400
13354 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
13356 commit 86c8e17f25e972a7e272950a0735fad84e082b88
13358 Date: Wed Aug 16 13:59:47 2006 -0500
13360 * Fix disable_of booting
13364 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
13366 Date: Wed Aug 16 10:54:09 2006 -0500
13368 * Support for FDT in uImage format, error when using FDT from flash
13372 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
13374 Date: Tue Aug 15 14:22:35 2006 +0200
13376 Add initial support for the ALPR board from Prodrive
13377 NAND needs some additional testing
13378 Patch by Heiko Schocher, 15 Aug 2006
13380 commit f0ff4692ff3372dec55074a8eb444943ab095abb
13382 Date: Tue Aug 15 14:15:51 2006 +0200
13384 Add FPGA Altera Cyclone 2 support
13385 Patch by Heiko Schocher, 15 Aug 2006
13387 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
13389 Date: Mon Aug 14 15:33:38 2006 -0500
13391 Fix BAT0 to actually be cacheable, non-guarded as documented.
13395 commit 40bc83559db5745681909fd7382ae509567e116d
13397 Date: Wed Aug 9 15:32:16 2006 -0500
13399 Removed MPC8641HPCN DTS source file from build.
13400 It is no longer linked into U-Boot; its sources are
13401 now located in the kernel tree.
13405 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
13407 Date: Wed Jun 28 10:47:03 2006 -0500
13409 * Switched default PCI speed for 8540 ADS back to 33MHz
13411 * Added comments and a printf to warn that PCI-X won't
13413 Patch by Andy Fleming 17-Mar-2006
13417 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
13419 Date: Wed Jun 28 10:46:35 2006 -0500
13421 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
13425 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
13427 Date: Wed Jun 28 10:46:13 2006 -0500
13429 * Added VIA configuration table
13431 * Added support for PCI2 on CDS
13432 Patch by Andy Fleming 17-Mar-2006
13436 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
13438 Date: Wed Jun 28 10:45:41 2006 -0500
13440 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
13444 commit 97074ed9655309b64231bc2cee69fe85399f8055
13446 Date: Wed Jun 28 10:45:17 2006 -0500
13448 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
13452 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
13454 Date: Wed Jun 28 10:44:49 2006 -0500
13456 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
13460 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
13462 Date: Wed Jun 28 10:44:23 2006 -0500
13464 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
13468 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
13470 Date: Wed Jun 28 10:43:36 2006 -0500
13472 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
13476 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
13478 Date: Wed Jun 28 10:43:00 2006 -0500
13480 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
13482 commit 5498d90312aad9f6bdbf047986027c35b03cd163
13484 Date: Wed Jun 28 10:42:24 2006 -0500
13486 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
13488 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
13490 Date: Wed Jun 28 10:41:37 2006 -0500
13492 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
13494 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
13496 Date: Wed Aug 9 14:33:50 2006 +0100
13498 Add Rapidio support for the MPC8641HPCN
13502 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
13504 Date: Tue Aug 8 11:32:43 2006 +0100
13506 Fix caslat calculation
13510 commit 709d3073e74153278e7904a70819bbef7df50e1a
13512 Date: Thu Aug 3 16:17:56 2006 -0500
13514 Convert to mac-address in ethernet nodes.
13516 commit 71748af833ca1017edf1415be376366ff2937d17
13518 Date: Fri Jul 28 12:41:35 2006 -0400
13520 Correct the irq value of DUART2
13522 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
13524 Date: Fri Jul 28 12:41:41 2006 -0400
13526 Change the space size of PEX IO in README
13528 commit 239db37c94f7a92941c4465feceb867c609241c5
13530 Date: Fri Jul 28 12:41:18 2006 -0400
13532 Move get_board_sys_clk to board directory
13534 commit 492900b985439fbce1a118afde1e35def870db03
13536 Date: Fri Jul 28 09:03:54 2006 +0100
13538 Fix 8641HPCN pollution
13540 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
13542 Date: Fri Jul 28 08:16:06 2006 +0100
13544 Fix 8641HPCN timebase
13546 commit c86360b830f1eecd7a72208575dde4f57879faea
13548 Date: Fri Jul 28 00:01:34 2006 +0800
13550 Fixed OF device tree of mpc86xxhpcn board.
13552 The changes works in with kernel irq mapping rework.
13556 commit bea3f28d285942bf3f7ab339ce85178ded544225
13558 Date: Wed Jul 12 10:48:05 2006 -0400
13560 Add support for reading and writing mac addresses to or from ID EEPROM.
13562 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
13563 With attached patch, we can use command "mac/mac read/mac save/"
13564 to read and write EEPROM under u-boot prompt.
13566 U-boot will calculate the checksum of EEPROM while bootup,
13567 if it is right, then u-boot will check whether the mac address
13568 of eTSEC0/1/2/3 is availalbe (non-zero).
13570 If there is mac address availabe in EEPROM, u-boot will use it,
13571 otherewise, u-boot will use the mac address defined in
13572 MPC8641HPCN.h. This matches the requirement to set unique mac address
13573 for each TSEC port.
13578 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
13580 Date: Thu Jul 13 10:35:10 2006 -0500
13582 Fixed initrd issue by define big RAM
13586 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
13588 Date: Fri Jul 7 10:01:45 2006 -0500
13590 We made a u-boot patch to fix the hang up issue
13591 when booting filesystem from ramdisk.
13595 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
13597 Date: Wed Jun 28 10:47:03 2006 -0500
13599 * Switched default PCI speed for 8540 ADS back to 33MHz
13600 * Added comments and a printf to warn that PCI-X won't
13602 Patch by Andy Fleming 17-Mar-2006
13606 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
13608 Date: Wed Jun 28 10:46:35 2006 -0500
13610 * Fixed a bug where 8555 PCI code used the old variable and
13612 Patch by Andy Fleming 17-Mar-2006
13616 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
13618 Date: Wed Jun 28 10:46:13 2006 -0500
13620 * Added VIA configuration table
13621 * Added support for PCI2 on CDS
13622 Patch by Andy Fleming 17-Mar-2006
13626 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
13628 Date: Wed Jun 28 10:45:41 2006 -0500
13630 * Fixed PCI memory definitions
13631 Patch by Andy Fleming 17-Mar-2006
13635 commit 087454609e47295443af793a282cddcd91a5f49c
13637 Date: Wed Jun 28 10:45:17 2006 -0500
13639 * Added support for initializing second PCI bus on 85xx
13640 Patch by Andy Fleming 17-Mar-2006
13644 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
13646 Date: Wed Jun 28 10:44:49 2006 -0500
13648 * Added PCI-X #defines for PCI-X initialization
13649 Patch by Andy Fleming on 17-Mar-2006
13653 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
13655 Date: Wed Jun 28 10:44:23 2006 -0500
13657 * Made sure the code which disables prefetch for PCI devices
13658 sets the size of the prefetch region to 0
13659 Patch by Andy Fleming on 17-Mar-2006
13663 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
13665 Date: Wed Jun 28 10:43:36 2006 -0500
13667 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
13668 Patch by Jon Loeliger 17-Jan-2006
13672 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
13674 Date: Wed Jun 28 10:43:00 2006 -0500
13676 * Removed the oftree.dts for stxxtx in light of the changes
13677 to the flat device tree handling code
13678 Patch by Matthew McClintock 26-June-2006
13680 commit 1b380ec225665e73959677f3893dc658c5925e05
13682 Date: Wed Jun 28 10:42:24 2006 -0500
13684 * Patch to modify ft_build.c to update flat device trees in place
13685 Patch by Matthew McClintock 26-June-2006
13687 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
13689 Date: Wed Jun 28 10:41:37 2006 -0500
13691 * Modify bootm command to support booting with flat device trees
13692 Patch by Matthew McClintock 26-June-2006
13694 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
13696 Date: Wed Jun 28 08:43:56 2006 -0500
13698 Change Id to symbolic name for RTL8139
13702 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
13704 Date: Tue Jun 27 18:12:10 2006 +0800
13706 Fix RTL8139 in big endian
13711 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
13713 Date: Tue Jun 27 18:12:23 2006 +0800
13715 Fix Tsec bug when no link
13717 When tftp a non-exist file from the tftp server, u-boot will check
13718 the link of all eth port. The original file will return wrong link
13719 state on the no link ports.
13723 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
13725 Date: Tue Jun 27 18:12:02 2006 +0800
13727 Fix bug for io_bar size during pci scan
13729 During the pci scan process, Some devices return bar_reponse with the
13730 highest bytes 0, such as the pci bridge in uli1575 return bar_response
13731 with 0xffffff, So the bar_size should be manually set under 64K.
13735 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
13737 Date: Tue Jun 27 18:11:54 2006 +0800
13739 Enable PCIE1 for MPC8641HPCN board
13743 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
13745 Date: Mon Jun 26 11:06:00 2006 +0200
13749 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
13751 Date: Thu Jun 22 08:51:46 2006 -0500
13753 Fix bug in 8641hpcn reset command with no args.
13758 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
13760 Date: Tue Jun 20 17:47:15 2006 +0800
13762 Reworked IRQ mapping in OF-tree.
13764 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
13766 Date: Thu Jun 15 21:33:37 2006 -0500
13768 Do not enable address translation on secondary CPUs.
13769 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
13773 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
13775 Date: Wed Jun 14 18:14:56 2006 +0200
13779 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
13781 Date: Wed Jun 14 17:45:53 2006 +0200
13783 Various USB related patches
13784 - Add support for mpc8xx USB device.
13785 - Add support for Common Device Class - Abstract Control Model USB console.
13786 - Add support for flow control in USB slave devices.
13787 - Add support for switching between gserial and cdc_acm using environment.
13788 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
13789 - Update usbcore slightly to ease host enumeration.
13790 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
13791 - Add AdderUSB_config as a defconfig to enable usage of the USB console
13792 by default with the Adder87x U-Boot port.
13795 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
13797 Date: Wed Jun 7 10:53:55 2006 -0500
13799 Fix a get_board_sys_clk() use-before-def warning.
13803 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
13805 Date: Wed Jun 7 10:52:49 2006 -0500
13807 Allow DTC path to be passed in.
13811 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
13813 Date: Tue Jun 6 16:54:29 2006 -0400
13815 Modify the IRQ of DUART2
13817 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
13819 Date: Wed May 31 13:55:35 2006 -0500
13825 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
13827 Date: Wed May 31 12:44:44 2006 -0500
13829 White space cleanup.
13830 Some 80-column cleanups.
13831 Convert printf() to puts() where possible.
13832 Use #include "spd_sdram.h" as needed.
13833 Enhanced reset command usage message a bit.
13837 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
13839 Date: Wed May 31 11:39:34 2006 -0500
13841 Removed unneeded local_bus_init() from 8641HPCN board.
13845 commit 4d3d729c16c392d2982d3266b659d333c927697d
13847 Date: Wed May 31 11:24:28 2006 -0500
13849 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
13853 commit b2a941de060350ad15878d8219825f4950e9bb8e
13855 Date: Wed May 31 10:07:28 2006 -0500
13857 Remove dead debug code.
13861 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
13863 Date: Tue May 30 17:47:00 2006 -0500
13865 Move mpc86xx PIXIS code to board directory
13867 First cut at moving the PIXIS platform code out of
13868 the 86xx cpu directory and into board/mpc8641hpcn
13873 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
13875 Date: Tue May 30 16:56:14 2006 +0200
13877 Support generic OHCI support for the s3c24x0 cpu.
13879 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
13881 Date: Tue May 30 09:10:32 2006 -0500
13883 Improve "reset" command's interaction with watchdog.
13885 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
13886 "reset altbank wd" will reset another bank WITH watch dog enabled
13887 "diswd" will disable watch dog after u-boot boots up successfully
13891 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
13893 Date: Tue May 30 08:51:19 2006 -0500
13895 Fix two SDRAM setup bugs.
13898 Enable 1T/2T based on number of DIMMs present.
13902 commit d11fec5015334deb2010e36ce00bb118cc5429a5
13904 Date: Fri May 26 10:24:48 2006 -0500
13906 Add first draft of the MPC8641HPCN doc/README.
13910 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
13912 Date: Fri May 26 10:13:04 2006 -0500
13914 Added pci@8000 block.
13915 Updated ethernet interrupt mappings (moved up 48).
13916 Cleaned up a few comments.
13920 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
13922 Date: Fri May 26 10:01:16 2006 -0500
13924 Allow args on reset command.
13928 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
13930 Date: Tue May 23 13:38:35 2006 +0200
13932 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
13933 fixes to the latter.
13935 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
13937 Date: Tue May 23 10:33:11 2006 +0200
13939 More cleanup for the delta board and the generic usb_ohci driver. Added
13940 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
13941 initialization and cleanup hooks respectively.
13943 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
13945 Date: Mon May 22 16:33:54 2006 +0200
13947 This patch adds USB storage support for the delta board. This is the first
13948 board to make use of a generic OHCI driver, that calls hooks for board
13949 dependant initialization.
13951 commit 14e37081ff3cac7ebe6e93836523429853b6b292
13953 Date: Fri May 19 13:28:39 2006 -0500
13955 Change arbitration to round-robin for SMP linux.
13957 commit 9a655876e5995be80f49054e2509500e871e4d3a
13959 Date: Fri May 19 13:26:34 2006 -0500
13961 Enable dual DDR controllers and interleaving.
13963 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
13965 Date: Fri May 19 13:22:44 2006 -0500
13967 Update 86xx address map and LAWBARs.
13969 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
13971 Date: Fri May 19 13:14:15 2006 -0500
13973 Remove L2 Cache invalidate polling.
13975 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
13977 Date: Fri May 19 12:33:09 2006 -0500
13979 Enable 2nd CPU and I2C.
13981 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
13983 Date: Mon May 15 07:26:56 2006 -0500
13985 Update interrupt mapping.
13987 commit 6cfea33477b04b63ed47386ed1629529484c33ba
13989 Date: Wed May 10 09:38:06 2006 -0500
13991 Remove unneeded INIT_RAM_LOCK cache twiddling.
13992 Correctly tracks r29 as global data pointer now.
13996 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
13998 Date: Wed May 10 09:33:07 2006 -0500
14000 Remove unnecessary flash.c file.
14002 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
14004 Date: Tue May 9 08:23:49 2006 -0500
14006 Get MPC8641HPCN flash images working.
14008 Enable the CFI driver.
14009 Remove bogus LAWBAR7 cruft.
14010 Use correct TEXT_BASE, Fixup load script.
14011 Enable SPD EEPROM during DDR setup.
14012 Use generic RFC 1918 IP addresses by default.
14014 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
14016 Date: Thu Apr 27 10:15:16 2006 -0500
14018 Cleanup whitespaces and style issues.
14019 Removed //-style comments.
14020 Use 80-column lines.
14021 Remove trailing whitespace.
14022 Remove dead code and debug cruft.
14024 commit a2320a6bf8113a09544c42d160d10ac69d049a03
14026 Date: Thu Apr 27 08:22:39 2006 -0500
14028 Revert bad PCI prefetch limit change.
14030 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
14032 Date: Wed Apr 26 17:58:56 2006 -0500
14034 Initial support for MPC8641 HPCN board.
projects / J-u-boot.git / blob