board/aristainetos/aristainetos.c

   1 /*
   2  * (C) Copyright 2014
   3  * Heiko Schocher, DENX Software Engineering, [email protected].
   4  *
   5  * Based on:
   6  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   7  *
   8  * Author: Fabio Estevam <[email protected]>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #include <asm/arch/clock.h>
  14 #include <asm/arch/imx-regs.h>
  15 #include <asm/arch/iomux.h>
  16 #include <asm/arch/mx6-pins.h>
  17 #include <asm/errno.h>
  18 #include <asm/gpio.h>
  19 #include <asm/imx-common/iomux-v3.h>
  20 #include <asm/imx-common/boot_mode.h>
  21 #include <asm/imx-common/mxc_i2c.h>
  22 #include <asm/imx-common/video.h>
  23 #include <mmc.h>
  24 #include <fsl_esdhc.h>
  25 #include <miiphy.h>
  26 #include <netdev.h>
  27 #include <asm/arch/mxc_hdmi.h>
  28 #include <asm/arch/crm_regs.h>
  29 #include <linux/fb.h>
  30 #include <ipu_pixfmt.h>
  31 #include <asm/io.h>
  32 #include <asm/arch/sys_proto.h>
  33 #include <pwm.h>
  34
  35 DECLARE_GLOBAL_DATA_PTR;
  36
  37 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                   \
  38         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |                 \
  39         PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  40
  41 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |                    \
  42         PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |                 \
  43         PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  44
  45 #define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                   \
  46         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
  47
  48 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
  49                       PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
  50
  51 #define I2C_PAD_CTRL    (PAD_CTL_PUS_100K_UP |                  \
  52         PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
  53         PAD_CTL_ODE | PAD_CTL_SRE_FAST)
  54
  55 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
  56
  57 #define DISP_PAD_CTRL   (0x10)
  58
  59 #define ECSPI4_CS1              IMX_GPIO_NR(5, 2)
  60
  61 struct i2c_pads_info i2c_pad_info1 = {
  62         .scl = {
  63                 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
  64                 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
  65                 .gp = IMX_GPIO_NR(5, 27)
  66         },
  67         .sda = {
  68                 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
  69                 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
  70                 .gp = IMX_GPIO_NR(5, 26)
  71         }
  72 };
  73
  74 struct i2c_pads_info i2c_pad_info2 = {
  75         .scl = {
  76                 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
  77                 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
  78                 .gp = IMX_GPIO_NR(4, 12)
  79         },
  80         .sda = {
  81                 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
  82                 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
  83                 .gp = IMX_GPIO_NR(4, 13)
  84         }
  85 };
  86
  87 struct i2c_pads_info i2c_pad_info3 = {
  88         .scl = {
  89                 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
  90                 .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
  91                 .gp = IMX_GPIO_NR(3, 17)
  92         },
  93         .sda = {
  94                 .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
  95                 .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
  96                 .gp = IMX_GPIO_NR(3, 18)
  97         }
  98 };
  99
 100 int dram_init(void)
 101 {
 102         gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
 103
 104         return 0;
 105 }
 106
 107 iomux_v3_cfg_t const uart1_pads[] = {
 108         MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 109         MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 110 };
 111
 112 iomux_v3_cfg_t const uart5_pads[] = {
 113         MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 114         MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 115 };
 116
 117 iomux_v3_cfg_t const gpio_pads[] = {
 118         /* LED enable */
 119         MX6_PAD_SD4_DAT5__GPIO2_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
 120         /* spi flash WP protect */
 121         MX6_PAD_SD4_DAT7__GPIO2_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
 122         /* backlight enable */
 123         MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
 124         /* LED yellow */
 125         MX6_PAD_GPIO_3__GPIO1_IO03 | MUX_PAD_CTRL(NO_PAD_CTRL),
 126         /* LED red */
 127         MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
 128         /* LED green */
 129         MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
 130         /* LED blue */
 131         MX6_PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
 132         /* i2c4 scl */
 133         MX6_PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
 134         /* i2c4 sda */
 135         MX6_PAD_GPIO_8__GPIO1_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
 136         /* spi CS 1 */
 137         MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
 138 };
 139
 140 static iomux_v3_cfg_t const misc_pads[] = {
 141         MX6_PAD_GPIO_1__USB_OTG_ID              | MUX_PAD_CTRL(NO_PAD_CTRL),
 142         /* OTG Power enable */
 143         MX6_PAD_EIM_D31__GPIO3_IO31             | MUX_PAD_CTRL(NO_PAD_CTRL),
 144         MX6_PAD_KEY_ROW4__GPIO4_IO15            | MUX_PAD_CTRL(NO_PAD_CTRL),
 145 };
 146
 147 iomux_v3_cfg_t const enet_pads[] = {
 148         MX6_PAD_GPIO_16__ENET_REF_CLK   | MUX_PAD_CTRL(0x4001b0a8),
 149         MX6_PAD_ENET_MDIO__ENET_MDIO    | MUX_PAD_CTRL(ENET_PAD_CTRL),
 150         MX6_PAD_ENET_MDC__ENET_MDC      | MUX_PAD_CTRL(ENET_PAD_CTRL),
 151         MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
 152         MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
 153         MX6_PAD_ENET_TX_EN__ENET_TX_EN  | MUX_PAD_CTRL(ENET_PAD_CTRL),
 154         MX6_PAD_ENET_RX_ER__ENET_RX_ER  | MUX_PAD_CTRL(ENET_PAD_CTRL),
 155         MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
 156         MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
 157         MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
 158 };
 159
 160 static void setup_iomux_enet(void)
 161 {
 162         struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 163
 164         imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
 165
 166         /* set GPIO_16 as ENET_REF_CLK_OUT */
 167         setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
 168 }
 169
 170 iomux_v3_cfg_t const usdhc1_pads[] = {
 171         MX6_PAD_SD1_CLK__SD1_CLK        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 172         MX6_PAD_SD1_CMD__SD1_CMD        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 173         MX6_PAD_SD1_DAT0__SD1_DATA0     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 174         MX6_PAD_SD1_DAT1__SD1_DATA1     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 175         MX6_PAD_SD1_DAT2__SD1_DATA2     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 176         MX6_PAD_SD1_DAT3__SD1_DATA3     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 177 };
 178
 179 iomux_v3_cfg_t const usdhc2_pads[] = {
 180         MX6_PAD_SD2_CLK__SD2_CLK        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 181         MX6_PAD_SD2_CMD__SD2_CMD        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 182         MX6_PAD_SD2_DAT0__SD2_DATA0     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 183         MX6_PAD_SD2_DAT1__SD2_DATA1     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 184         MX6_PAD_SD2_DAT2__SD2_DATA2     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 185         MX6_PAD_SD2_DAT3__SD2_DATA3     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 186 };
 187
 188 iomux_v3_cfg_t const ecspi4_pads[] = {
 189         MX6_PAD_EIM_D21__ECSPI4_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL),
 190         MX6_PAD_EIM_D22__ECSPI4_MISO | MUX_PAD_CTRL(NO_PAD_CTRL),
 191         MX6_PAD_EIM_D28__ECSPI4_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL),
 192         MX6_PAD_EIM_D20__GPIO3_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
 193 };
 194
 195 static iomux_v3_cfg_t const display_pads[] = {
 196         MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(DISP_PAD_CTRL),
 197         MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
 198         MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02,
 199         MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03,
 200         MX6_PAD_DI0_PIN4__GPIO4_IO20,
 201         MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00,
 202         MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01,
 203         MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02,
 204         MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03,
 205         MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04,
 206         MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05,
 207         MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06,
 208         MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07,
 209         MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08,
 210         MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09,
 211         MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10,
 212         MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11,
 213         MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12,
 214         MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13,
 215         MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14,
 216         MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15,
 217         MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16,
 218         MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17,
 219         MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18,
 220         MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19,
 221         MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20,
 222         MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21,
 223         MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22,
 224         MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
 225 };
 226
 227 static iomux_v3_cfg_t const backlight_pads[] = {
 228         MX6_PAD_GPIO_9__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
 229         MX6_PAD_SD4_DAT1__PWM3_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
 230         MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
 231 };
 232
 233 static void setup_spi(void)
 234 {
 235         int i;
 236
 237         imx_iomux_v3_setup_multiple_pads(ecspi4_pads, ARRAY_SIZE(ecspi4_pads));
 238         for (i = 0; i < 3; i++)
 239                 enable_spi_clk(true, i);
 240
 241         /* set cs1 to high */
 242         gpio_direction_output(ECSPI4_CS1, 1);
 243 }
 244
 245 static void setup_iomux_gpio(void)
 246 {
 247         imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
 248 }
 249
 250 static void setup_iomux_uart(void)
 251 {
 252         imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
 253 }
 254
 255 #ifdef CONFIG_FSL_ESDHC
 256 struct fsl_esdhc_cfg usdhc_cfg[2] = {
 257         {USDHC1_BASE_ADDR},
 258         {USDHC2_BASE_ADDR},
 259 };
 260
 261 int board_mmc_getcd(struct mmc *mmc)
 262 {
 263         return 1;
 264 }
 265
 266 int board_mmc_init(bd_t *bis)
 267 {
 268         usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 269         usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 270
 271         imx_iomux_v3_setup_multiple_pads(usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
 272         imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
 273
 274         return fsl_esdhc_initialize(bis, &usdhc_cfg[0]) |
 275                 fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
 276 }
 277 #endif
 278
 279 /*
 280  * Do not overwrite the console
 281  * Use always serial for U-Boot console
 282  */
 283 int overwrite_console(void)
 284 {
 285         return 1;
 286 }
 287
 288 int board_eth_init(bd_t *bis)
 289 {
 290         struct iomuxc *iomuxc_regs =
 291                                 (struct iomuxc *)IOMUXC_BASE_ADDR;
 292         int ret;
 293
 294         setup_iomux_enet();
 295         /* clear gpr1[14], gpr1[18:17] to select anatop clock */
 296         clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
 297
 298         ret = enable_fec_anatop_clock(ENET_50MHz);
 299         if (ret)
 300                 return ret;
 301
 302         return cpu_eth_init(bis);
 303 }
 304 #if defined(CONFIG_VIDEO_IPUV3)
 305
 306 static void enable_lvds(struct display_info_t const *dev)
 307 {
 308         imx_iomux_v3_setup_multiple_pads(
 309                 display_pads,
 310                  ARRAY_SIZE(display_pads));
 311         imx_iomux_v3_setup_multiple_pads(
 312                 backlight_pads,
 313                  ARRAY_SIZE(backlight_pads));
 314
 315         /* enable backlight PWM 3 */
 316         if (pwm_init(2, 0, 0))
 317                 goto error;
 318         /* duty cycle 200ns, period: 3000ns */
 319         if (pwm_config(2, 200, 3000))
 320                 goto error;
 321         if (pwm_enable(2))
 322                 goto error;
 323         return;
 324
 325 error:
 326         puts("error init pwm for backlight\n");
 327         return;
 328 }
 329
 330 struct display_info_t const displays[] = {
 331         {
 332                 .bus    = -1,
 333                 .addr   = 0,
 334                 .pixfmt = IPU_PIX_FMT_RGB24,
 335                 .detect = NULL,
 336                 .enable = enable_lvds,
 337                 .mode   = {
 338                         .name           = "lb07wv8",
 339                         .refresh        = 60,
 340                         .xres           = 800,
 341                         .yres           = 480,
 342                         .pixclock       = 33246,
 343                         .left_margin    = 88,
 344                         .right_margin   = 88,
 345                         .upper_margin   = 10,
 346                         .lower_margin   = 10,
 347                         .hsync_len      = 25,
 348                         .vsync_len      = 1,
 349                         .sync           = 0,
 350                         .vmode          = FB_VMODE_NONINTERLACED
 351                 }
 352         }
 353 };
 354 size_t display_count = ARRAY_SIZE(displays);
 355
 356 static void setup_display(void)
 357 {
 358         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 359         int reg;
 360
 361         enable_ipu_clock();
 362
 363         reg = readl(&mxc_ccm->cs2cdr);
 364         /* select pll 5 clock */
 365         reg &= MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK;
 366         reg &= MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK;
 367         writel(reg, &mxc_ccm->cs2cdr);
 368
 369         imx_iomux_v3_setup_multiple_pads(backlight_pads,
 370                                          ARRAY_SIZE(backlight_pads));
 371 }
 372
 373 /* no console on this board */
 374 int board_cfb_skip(void)
 375 {
 376         return 1;
 377 }
 378 #endif
 379
 380 int board_early_init_f(void)
 381 {
 382         setup_iomux_uart();
 383         setup_iomux_gpio();
 384
 385 #if defined(CONFIG_VIDEO_IPUV3)
 386         setup_display();
 387 #endif
 388         return 0;
 389 }
 390
 391 iomux_v3_cfg_t nfc_pads[] = {
 392         MX6_PAD_NANDF_CLE__NAND_CLE             | MUX_PAD_CTRL(NO_PAD_CTRL),
 393         MX6_PAD_NANDF_ALE__NAND_ALE             | MUX_PAD_CTRL(NO_PAD_CTRL),
 394         MX6_PAD_NANDF_WP_B__NAND_WP_B   | MUX_PAD_CTRL(NO_PAD_CTRL),
 395         MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL),
 396         MX6_PAD_NANDF_CS0__NAND_CE0_B           | MUX_PAD_CTRL(NO_PAD_CTRL),
 397         MX6_PAD_NANDF_CS1__NAND_CE1_B           | MUX_PAD_CTRL(NO_PAD_CTRL),
 398         MX6_PAD_NANDF_CS2__NAND_CE2_B           | MUX_PAD_CTRL(NO_PAD_CTRL),
 399         MX6_PAD_NANDF_CS3__NAND_CE3_B           | MUX_PAD_CTRL(NO_PAD_CTRL),
 400         MX6_PAD_SD4_CMD__NAND_RE_B              | MUX_PAD_CTRL(NO_PAD_CTRL),
 401         MX6_PAD_SD4_CLK__NAND_WE_B              | MUX_PAD_CTRL(NO_PAD_CTRL),
 402         MX6_PAD_NANDF_D0__NAND_DATA00           | MUX_PAD_CTRL(NO_PAD_CTRL),
 403         MX6_PAD_NANDF_D1__NAND_DATA01           | MUX_PAD_CTRL(NO_PAD_CTRL),
 404         MX6_PAD_NANDF_D2__NAND_DATA02           | MUX_PAD_CTRL(NO_PAD_CTRL),
 405         MX6_PAD_NANDF_D3__NAND_DATA03           | MUX_PAD_CTRL(NO_PAD_CTRL),
 406         MX6_PAD_NANDF_D4__NAND_DATA04           | MUX_PAD_CTRL(NO_PAD_CTRL),
 407         MX6_PAD_NANDF_D5__NAND_DATA05           | MUX_PAD_CTRL(NO_PAD_CTRL),
 408         MX6_PAD_NANDF_D6__NAND_DATA06           | MUX_PAD_CTRL(NO_PAD_CTRL),
 409         MX6_PAD_NANDF_D7__NAND_DATA07           | MUX_PAD_CTRL(NO_PAD_CTRL),
 410         MX6_PAD_SD4_DAT0__NAND_DQS              | MUX_PAD_CTRL(NO_PAD_CTRL),
 411 };
 412
 413 static void setup_gpmi_nand(void)
 414 {
 415         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 416
 417         /* config gpmi nand iomux */
 418         imx_iomux_v3_setup_multiple_pads(nfc_pads,
 419                                          ARRAY_SIZE(nfc_pads));
 420
 421         /* config gpmi and bch clock to 100 MHz */
 422         clrsetbits_le32(&mxc_ccm->cs2cdr,
 423                         MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
 424                         MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
 425                         MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
 426                         MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
 427                         MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
 428                         MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
 429
 430         /* enable gpmi and bch clock gating */
 431         setbits_le32(&mxc_ccm->CCGR4,
 432                      MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
 433                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
 434                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
 435                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
 436                      MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
 437
 438         /* enable apbh clock gating */
 439         setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
 440 }
 441
 442 int board_init(void)
 443 {
 444         struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 445
 446         /* address of boot parameters */
 447         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 448
 449         setup_spi();
 450
 451         setup_i2c(0, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
 452                   &i2c_pad_info1);
 453         setup_i2c(1, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
 454                   &i2c_pad_info2);
 455         setup_i2c(2, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
 456                   &i2c_pad_info3);
 457
 458         /* i2c4 not used, set it to gpio input */
 459         gpio_request(IMX_GPIO_NR(1, 7), "i2c4_scl");
 460         gpio_direction_input(IMX_GPIO_NR(1, 7));
 461         gpio_request(IMX_GPIO_NR(1, 8), "i2c4_sda");
 462         gpio_direction_input(IMX_GPIO_NR(1, 8));
 463
 464         /* SPI NOR Flash read only */
 465         gpio_request(CONFIG_GPIO_ENABLE_SPI_FLASH, "ena_spi_nor");
 466         gpio_direction_output(CONFIG_GPIO_ENABLE_SPI_FLASH, 0);
 467         gpio_free(CONFIG_GPIO_ENABLE_SPI_FLASH);
 468
 469         /* enable LED */
 470         gpio_request(IMX_GPIO_NR(2, 13), "LED ena");
 471         gpio_direction_output(IMX_GPIO_NR(2, 13), 0);
 472
 473         gpio_request(IMX_GPIO_NR(1, 3), "LED yellow");
 474         gpio_direction_output(IMX_GPIO_NR(1, 3), 1);
 475         gpio_request(IMX_GPIO_NR(1, 4), "LED red");
 476         gpio_direction_output(IMX_GPIO_NR(1, 4), 1);
 477         gpio_request(IMX_GPIO_NR(1, 5), "LED green");
 478         gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
 479         gpio_request(IMX_GPIO_NR(1, 6), "LED blue");
 480         gpio_direction_output(IMX_GPIO_NR(1, 6), 1);
 481
 482         setup_gpmi_nand();
 483
 484         /* GPIO_1 for USB_OTG_ID */
 485         setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_USB_OTG_ID_SEL_MASK);
 486         imx_iomux_v3_setup_multiple_pads(misc_pads, ARRAY_SIZE(misc_pads));
 487
 488         return 0;
 489 }
 490
 491 int checkboard(void)
 492 {
 493         puts("Board: aristaitenos\n");
 494         return 0;
 495 }
 496
 497 #ifdef CONFIG_USB_EHCI_MX6
 498 int board_ehci_hcd_init(int port)
 499 {
 500         int ret;
 501
 502         ret = gpio_request(ARISTAINETOS_USB_H1_PWR, "usb-h1-pwr");
 503         if (!ret)
 504                 gpio_direction_output(ARISTAINETOS_USB_H1_PWR, 1);
 505         ret = gpio_request(ARISTAINETOS_USB_OTG_PWR, "usb-OTG-pwr");
 506         if (!ret)
 507                 gpio_direction_output(ARISTAINETOS_USB_OTG_PWR, 1);
 508         return 0;
 509 }
 510
 511 int board_ehci_power(int port, int on)
 512 {
 513         if (port)
 514                 gpio_set_value(ARISTAINETOS_USB_OTG_PWR, on);
 515         else
 516                 gpio_set_value(ARISTAINETOS_USB_H1_PWR, on);
 517         return 0;
 518 }
 519 #endif