2 * (C) Copyright 2000-2003
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * CPU specific code for the MPC825x / MPC826x / MPC827x / MPC828x
27 * written or collected and sometimes rewritten by
33 * modified for 8260 by
39 * added HiP7 (8270/8275/8280) processors support by
47 #include <asm/processor.h>
48 #include <asm/cpm_8260.h>
52 DECLARE_GLOBAL_DATA_PTR;
54 volatile immap_t *immap = (immap_t *) CFG_IMMR;
55 ulong clock = gd->cpu_clk;
56 uint pvr = get_pvr ();
75 return -1; /* whoops! not an MPC8260 */
79 immr = immap->im_memctl.memc_immr;
80 if ((immr & IMMR_ISB_MSK) != CFG_IMMR)
81 return -1; /* whoops! someone moved the IMMR */
83 printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev);
86 * the bottom 16 bits of the immr are the Part Number and Mask Number
87 * (4-34); the 16 bits at PROFF_REVNUM (0x8af0) in dual port ram is the
88 * RISC Microcode Revision Number (13-10).
89 * For the 8260, Motorola doesn't include the Microcode Revision
92 m = immr & (IMMR_PARTNUM_MSK | IMMR_MASKNUM_MSK);
93 k = *((ushort *) & immap->im_dprambase[PROFF_REVNUM]);
103 printf ("A.1 1K22A-XC");
106 printf ("B.1 1K23A");
109 printf ("B.2 2K23A-XC");
112 printf ("B.3 3K23A");
115 printf ("C.2 6K23A");
118 printf ("A.0(A) 2K25A");
121 printf ("B.1 4K25A");
124 printf ("C.0 5K25A");
127 printf ("0.0 0K49M");
130 printf ("0.1 1K49M");
133 printf ("unknown [immr=0x%04x,k=0x%04x]", m, k);
137 printf (") at %s MHz\n", strmhz (buf, clock));
142 /* ------------------------------------------------------------------------- */
143 /* configures a UPM by writing into the UPM RAM array */
144 /* uses bank 11 and a dummy physical address (=BRx_BA_MSK) */
145 /* NOTE: the physical address chosen must not overlap into any other area */
146 /* mapped by the memory controller because bank 11 has the lowest priority */
148 void upmconfig (uint upm, uint * table, uint size)
150 volatile immap_t *immap = (immap_t *) CFG_IMMR;
151 volatile memctl8260_t *memctl = &immap->im_memctl;
152 volatile uchar *dummy = (uchar *) BRx_BA_MSK; /* set all BA bits */
155 /* first set up bank 11 to reference the correct UPM at a dummy address */
157 memctl->memc_or11 = ORxU_AM_MSK; /* set all AM bits */
163 ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMA |
165 memctl->memc_mamr = MxMR_OP_WARR;
170 ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMB |
172 memctl->memc_mbmr = MxMR_OP_WARR;
177 ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMC |
179 memctl->memc_mcmr = MxMR_OP_WARR;
183 panic ("upmconfig passed invalid UPM number (%u)\n", upm);
189 * at this point, the dummy address is set up to access the selected UPM,
190 * the MAD pointer is zero, and the MxMR OP is set for writing to RAM
192 * now we simply load the mdr with each word and poke the dummy address.
193 * the MAD is incremented on each access.
196 for (i = 0; i < size; i++) {
197 memctl->memc_mdr = table[i];
201 /* now kill bank 11 */
202 memctl->memc_br11 = 0;
205 /* ------------------------------------------------------------------------- */
208 do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
212 volatile immap_t *immap = (immap_t *) CFG_IMMR;
214 immap->im_clkrst.car_rmr = RMR_CSRE; /* Checkstop Reset enable */
216 /* Interrupts and MMU off */
217 __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
219 msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
220 __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
223 * Trying to execute the next instruction at a non-existing address
224 * should cause a machine check, resulting in reset
226 #ifdef CFG_RESET_ADDRESS
227 addr = CFG_RESET_ADDRESS;
230 * note: when CFG_MONITOR_BASE points to a RAM address, CFG_MONITOR_BASE
231 * - sizeof (ulong) is usually a valid address. Better pick an address
232 * known to be invalid on your system and assign it to CFG_RESET_ADDRESS.
234 addr = CFG_MONITOR_BASE - sizeof (ulong);
236 ((void (*)(void)) addr) ();
241 /* ------------------------------------------------------------------------- */
244 * Get timebase clock frequency (like cpu_clk in Hz)
247 unsigned long get_tbclk (void)
249 DECLARE_GLOBAL_DATA_PTR;
253 tbclk = (gd->bus_clk + 3L) / 4L;
258 /* ------------------------------------------------------------------------- */
260 #if defined(CONFIG_WATCHDOG)
261 void watchdog_reset (void)
263 int re_enable = disable_interrupts ();
265 reset_8260_watchdog ((immap_t *) CFG_IMMR);
267 enable_interrupts ();
269 #endif /* CONFIG_WATCHDOG */
271 /* ------------------------------------------------------------------------- */