]> Git Repo - J-u-boot.git/blob - configs/gurnard_defconfig
rockchip: rk3399-gru: Include pinctrl and regulators in SPL
[J-u-boot.git] / configs / gurnard_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
3 CONFIG_ARCH_AT91=y
4 CONFIG_TEXT_BASE=0x73f00000
5 CONFIG_SYS_MALLOC_LEN=0x100000
6 CONFIG_SYS_MALLOC_F_LEN=0x400
7 CONFIG_TARGET_GURNARD=y
8 CONFIG_AT91_GPIO_PULLUP=y
9 CONFIG_ATMEL_LEGACY=y
10 CONFIG_NR_DRAM_BANKS=1
11 CONFIG_ENV_SIZE=0x40000
12 CONFIG_ENV_OFFSET=0x80000
13 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-gurnard"
14 CONFIG_SYS_LOAD_ADDR=0x23000000
15 CONFIG_FIT=y
16 CONFIG_BOOTDELAY=3
17 CONFIG_SYS_CBSIZE=256
18 CONFIG_SYS_PBSIZE=276
19 # CONFIG_DISPLAY_BOARDINFO is not set
20 CONFIG_BOARD_EARLY_INIT_F=y
21 CONFIG_RESET_PHY_R=y
22 CONFIG_HUSH_PARSER=y
23 # CONFIG_CMD_BDI is not set
24 # CONFIG_CMD_IMI is not set
25 CONFIG_CMD_GPIO=y
26 # CONFIG_CMD_LOADS is not set
27 CONFIG_CMD_MMC=y
28 CONFIG_CMD_NAND=y
29 CONFIG_CMD_PART=y
30 CONFIG_CMD_USB=y
31 # CONFIG_CMD_SOURCE is not set
32 # CONFIG_CMD_SETEXPR is not set
33 CONFIG_BOOTP_BOOTFILESIZE=y
34 CONFIG_CMD_DHCP=y
35 CONFIG_CMD_MII=y
36 # CONFIG_CMD_MDIO is not set
37 CONFIG_CMD_PING=y
38 CONFIG_CMD_CACHE=y
39 CONFIG_CMD_FAT=y
40 CONFIG_OF_CONTROL=y
41 CONFIG_ENV_OVERWRITE=y
42 CONFIG_ENV_IS_IN_NAND=y
43 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
44 CONFIG_NET_RETRY_COUNT=20
45 CONFIG_TFTP_PORT=y
46 CONFIG_TFTP_TSIZE=y
47 CONFIG_AT91_GPIO=y
48 CONFIG_GENERIC_ATMEL_MCI=y
49 CONFIG_MTD_RAW_NAND=y
50 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
51 CONFIG_NAND_ATMEL=y
52 CONFIG_ATMEL_NAND_HWECC=y
53 CONFIG_MACB=y
54 CONFIG_RMII=y
55 CONFIG_ATMEL_USART=y
56 CONFIG_TIMER=y
57 CONFIG_ATMEL_PIT_TIMER=y
58 CONFIG_USB=y
59 CONFIG_USB_EHCI_HCD=y
60 CONFIG_VIDEO=y
61 # CONFIG_VIDEO_LOGO is not set
62 # CONFIG_VIDEO_BPP32 is not set
63 CONFIG_ATMEL_LCD=y
64 CONFIG_CMD_DHRYSTONE=y
This page took 0.028854 seconds and 4 git commands to generate.