board/raspberrypi/rpi/rpi.c

   1 /*
   2  * (C) Copyright 2012-2013,2015 Stephen Warren
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0
   5  */
   6
   7 #include <common.h>
   8 #include <config.h>
   9 #include <dm.h>
  10 #include <fdt_support.h>
  11 #include <fdt_simplefb.h>
  12 #include <lcd.h>
  13 #include <mmc.h>
  14 #include <asm/gpio.h>
  15 #include <asm/arch/mbox.h>
  16 #include <asm/arch/sdhci.h>
  17 #include <asm/global_data.h>
  18 #include <dm/platform_data/serial_pl01x.h>
  19
  20 DECLARE_GLOBAL_DATA_PTR;
  21
  22 static const struct bcm2835_gpio_platdata gpio_platdata = {
  23         .base = BCM2835_GPIO_BASE,
  24 };
  25
  26 U_BOOT_DEVICE(bcm2835_gpios) = {
  27         .name = "gpio_bcm2835",
  28         .platdata = &gpio_platdata,
  29 };
  30
  31 static const struct pl01x_serial_platdata serial_platdata = {
  32 #ifdef CONFIG_BCM2836
  33         .base = 0x3f201000,
  34 #else
  35         .base = 0x20201000,
  36 #endif
  37         .type = TYPE_PL011,
  38         .clock = 3000000,
  39 };
  40
  41 U_BOOT_DEVICE(bcm2835_serials) = {
  42         .name = "serial_pl01x",
  43         .platdata = &serial_platdata,
  44 };
  45
  46 struct msg_get_arm_mem {
  47         struct bcm2835_mbox_hdr hdr;
  48         struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
  49         u32 end_tag;
  50 };
  51
  52 struct msg_get_board_rev {
  53         struct bcm2835_mbox_hdr hdr;
  54         struct bcm2835_mbox_tag_get_board_rev get_board_rev;
  55         u32 end_tag;
  56 };
  57
  58 struct msg_get_mac_address {
  59         struct bcm2835_mbox_hdr hdr;
  60         struct bcm2835_mbox_tag_get_mac_address get_mac_address;
  61         u32 end_tag;
  62 };
  63
  64 struct msg_set_power_state {
  65         struct bcm2835_mbox_hdr hdr;
  66         struct bcm2835_mbox_tag_set_power_state set_power_state;
  67         u32 end_tag;
  68 };
  69
  70 struct msg_get_clock_rate {
  71         struct bcm2835_mbox_hdr hdr;
  72         struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
  73         u32 end_tag;
  74 };
  75
  76 /* See comments in mbox.h for data source */
  77 static const struct {
  78         const char *name;
  79         const char *fdtfile;
  80         bool has_onboard_eth;
  81 } models[] = {
  82         [0] = {
  83                 "Unknown model",
  84 #ifdef CONFIG_BCM2836
  85                 "bcm2836-rpi-other.dtb",
  86 #else
  87                 "bcm2835-rpi-other.dtb",
  88 #endif
  89                 false,
  90         },
  91 #ifdef CONFIG_BCM2836
  92         [BCM2836_BOARD_REV_2_B] = {
  93                 "2 Model B",
  94                 "bcm2836-rpi-2-b.dtb",
  95                 true,
  96         },
  97 #else
  98         [BCM2835_BOARD_REV_B_I2C0_2] = {
  99                 "Model B (no P5)",
 100                 "bcm2835-rpi-b-i2c0.dtb",
 101                 true,
 102         },
 103         [BCM2835_BOARD_REV_B_I2C0_3] = {
 104                 "Model B (no P5)",
 105                 "bcm2835-rpi-b-i2c0.dtb",
 106                 true,
 107         },
 108         [BCM2835_BOARD_REV_B_I2C1_4] = {
 109                 "Model B",
 110                 "bcm2835-rpi-b.dtb",
 111                 true,
 112         },
 113         [BCM2835_BOARD_REV_B_I2C1_5] = {
 114                 "Model B",
 115                 "bcm2835-rpi-b.dtb",
 116                 true,
 117         },
 118         [BCM2835_BOARD_REV_B_I2C1_6] = {
 119                 "Model B",
 120                 "bcm2835-rpi-b.dtb",
 121                 true,
 122         },
 123         [BCM2835_BOARD_REV_A_7] = {
 124                 "Model A",
 125                 "bcm2835-rpi-a.dtb",
 126                 false,
 127         },
 128         [BCM2835_BOARD_REV_A_8] = {
 129                 "Model A",
 130                 "bcm2835-rpi-a.dtb",
 131                 false,
 132         },
 133         [BCM2835_BOARD_REV_A_9] = {
 134                 "Model A",
 135                 "bcm2835-rpi-a.dtb",
 136                 false,
 137         },
 138         [BCM2835_BOARD_REV_B_REV2_d] = {
 139                 "Model B rev2",
 140                 "bcm2835-rpi-b-rev2.dtb",
 141                 true,
 142         },
 143         [BCM2835_BOARD_REV_B_REV2_e] = {
 144                 "Model B rev2",
 145                 "bcm2835-rpi-b-rev2.dtb",
 146                 true,
 147         },
 148         [BCM2835_BOARD_REV_B_REV2_f] = {
 149                 "Model B rev2",
 150                 "bcm2835-rpi-b-rev2.dtb",
 151                 true,
 152         },
 153         [BCM2835_BOARD_REV_B_PLUS] = {
 154                 "Model B+",
 155                 "bcm2835-rpi-b-plus.dtb",
 156                 true,
 157         },
 158         [BCM2835_BOARD_REV_CM] = {
 159                 "Compute Module",
 160                 "bcm2835-rpi-cm.dtb",
 161                 false,
 162         },
 163         [BCM2835_BOARD_REV_A_PLUS] = {
 164                 "Model A+",
 165                 "bcm2835-rpi-a-plus.dtb",
 166                 false,
 167         },
 168 #endif
 169 };
 170
 171 u32 rpi_board_rev = 0;
 172
 173 int dram_init(void)
 174 {
 175         ALLOC_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1, 16);
 176         int ret;
 177
 178         BCM2835_MBOX_INIT_HDR(msg);
 179         BCM2835_MBOX_INIT_TAG(&msg->get_arm_mem, GET_ARM_MEMORY);
 180
 181         ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
 182         if (ret) {
 183                 printf("bcm2835: Could not query ARM memory size\n");
 184                 return -1;
 185         }
 186
 187         gd->ram_size = msg->get_arm_mem.body.resp.mem_size;
 188
 189         return 0;
 190 }
 191
 192 static void set_fdtfile(void)
 193 {
 194         const char *fdtfile;
 195
 196         if (getenv("fdtfile"))
 197                 return;
 198
 199         fdtfile = models[rpi_board_rev].fdtfile;
 200         setenv("fdtfile", fdtfile);
 201 }
 202
 203 static void set_usbethaddr(void)
 204 {
 205         ALLOC_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1, 16);
 206         int ret;
 207
 208         if (!models[rpi_board_rev].has_onboard_eth)
 209                 return;
 210
 211         if (getenv("usbethaddr"))
 212                 return;
 213
 214         BCM2835_MBOX_INIT_HDR(msg);
 215         BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS);
 216
 217         ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
 218         if (ret) {
 219                 printf("bcm2835: Could not query MAC address\n");
 220                 /* Ignore error; not critical */
 221                 return;
 222         }
 223
 224         eth_setenv_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
 225
 226         return;
 227 }
 228
 229 int misc_init_r(void)
 230 {
 231         set_fdtfile();
 232         set_usbethaddr();
 233         return 0;
 234 }
 235
 236 static int power_on_module(u32 module)
 237 {
 238         ALLOC_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1, 16);
 239         int ret;
 240
 241         BCM2835_MBOX_INIT_HDR(msg_pwr);
 242         BCM2835_MBOX_INIT_TAG(&msg_pwr->set_power_state,
 243                               SET_POWER_STATE);
 244         msg_pwr->set_power_state.body.req.device_id = module;
 245         msg_pwr->set_power_state.body.req.state =
 246                 BCM2835_MBOX_SET_POWER_STATE_REQ_ON |
 247                 BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT;
 248
 249         ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN,
 250                                      &msg_pwr->hdr);
 251         if (ret) {
 252                 printf("bcm2835: Could not set module %u power state\n",
 253                        module);
 254                 return -1;
 255         }
 256
 257         return 0;
 258 }
 259
 260 static void get_board_rev(void)
 261 {
 262         ALLOC_ALIGN_BUFFER(struct msg_get_board_rev, msg, 1, 16);
 263         int ret;
 264         const char *name;
 265
 266         BCM2835_MBOX_INIT_HDR(msg);
 267         BCM2835_MBOX_INIT_TAG(&msg->get_board_rev, GET_BOARD_REV);
 268
 269         ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
 270         if (ret) {
 271                 printf("bcm2835: Could not query board revision\n");
 272                 /* Ignore error; not critical */
 273                 return;
 274         }
 275
 276         /*
 277          * For details of old-vs-new scheme, see:
 278          * https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py
 279          * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282
 280          * (a few posts down)
 281          */
 282         rpi_board_rev = msg->get_board_rev.body.resp.rev;
 283         if (rpi_board_rev & 0x800000)
 284                 rpi_board_rev = (rpi_board_rev >> 4) & 0xff;
 285         if (rpi_board_rev >= ARRAY_SIZE(models)) {
 286                 printf("RPI: Board rev %u outside known range\n",
 287                        rpi_board_rev);
 288                 rpi_board_rev = 0;
 289         }
 290         if (!models[rpi_board_rev].name) {
 291                 printf("RPI: Board rev %u unknown\n", rpi_board_rev);
 292                 rpi_board_rev = 0;
 293         }
 294
 295         name = models[rpi_board_rev].name;
 296         printf("RPI %s\n", name);
 297 }
 298
 299 int board_init(void)
 300 {
 301         get_board_rev();
 302
 303         gd->bd->bi_boot_params = 0x100;
 304
 305         return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
 306 }
 307
 308 int board_mmc_init(bd_t *bis)
 309 {
 310         ALLOC_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1, 16);
 311         int ret;
 312
 313         power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI);
 314
 315         BCM2835_MBOX_INIT_HDR(msg_clk);
 316         BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_CLOCK_RATE);
 317         msg_clk->get_clock_rate.body.req.clock_id = BCM2835_MBOX_CLOCK_ID_EMMC;
 318
 319         ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr);
 320         if (ret) {
 321                 printf("bcm2835: Could not query eMMC clock rate\n");
 322                 return -1;
 323         }
 324
 325         return bcm2835_sdhci_init(BCM2835_SDHCI_BASE,
 326                                   msg_clk->get_clock_rate.body.resp.rate_hz);
 327 }
 328
 329 int ft_board_setup(void *blob, bd_t *bd)
 330 {
 331         /*
 332          * For now, we simply always add the simplefb DT node. Later, we
 333          * should be more intelligent, and e.g. only do this if no enabled DT
 334          * node exists for the "real" graphics driver.
 335          */
 336         lcd_dt_simplefb_add_node(blob);
 337
 338         return 0;
 339 }