1 commit 5ba7390c3cb579172be66888a371707b47b5be4e
3 Date: Fri Jan 11 02:15:02 2008 +0100
5 Fix compilation problem in common/cmd_bmp.c
7 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
8 isn't defined. This patch fix this.
12 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
14 Date: Fri Jan 11 01:12:09 2008 +0100
16 Fix defaultconfig for the mgcoge board.
20 commit ac9db066b26935f31bff15c98168b19faeb603f3
22 Date: Fri Jan 11 01:12:08 2008 +0100
24 Added support for the mgcoge board from keymile.
28 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
30 Date: Fri Jan 11 01:12:07 2008 +0100
32 Enable SMC microcode relocation patch for SMC1.
36 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
38 Date: Fri Jan 11 01:12:06 2008 +0100
40 Added support for the mgsuvd board from keymile.
44 commit bf05293973b348f6946c9df92cd3c65ece42d0be
46 Date: Thu Jan 10 16:02:07 2008 -0600
50 There were some size and unsigned problems.
51 Also add support for "ll" size modifier in format string like glibc
56 commit 92fa37eac530860643afa26ae347af3d23d67309
58 Date: Wed Jan 9 12:42:35 2008 -0500
60 Remove superfluous preprocessor conditionals from LM73 driver
62 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
64 (2) Use conditional Makefile.o.
68 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
70 Date: Thu Jan 10 17:59:07 2008 +0100
72 Add support for the TK885D baseboard from TELE-DATA
74 The TK885D board uses a TQM885D module from TQ, this port adds an
75 own configuration file and adds a last_stage_init() method to
76 configure the two PHYs, depending on the phy_auto_nego environment
81 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
83 Date: Thu Jan 10 02:22:05 2008 -0600
87 main.c: In function 'readline_into_buffer':
88 main.c:927: warning: unused variable 'p_buf'
92 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
94 Date: Fri Jan 11 14:30:01 2008 +0100
96 Add Fujitsu CoralP/Lime video driver
101 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
103 Date: Fri Jan 11 02:39:47 2008 +0100
105 Fix video console newline and carriage return handling
107 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
108 are not displayed correctly. This is an attempt to fix
109 this issue. Also add carriage return handling.
114 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
116 Date: Fri Jan 11 15:53:58 2008 +0100
118 ppc4xx: Fix sdram init on Sequoia boards
120 Clear possible errors in MCSR resulting from data-eye-search.
121 If not done, then we could get an interrupt later on when
122 exceptions are enabled.
126 commit d610a60730b7464f6f659db49d264d89a7c71061
128 Date: Fri Jan 11 15:31:09 2008 +0100
130 ppc4xx: Rework Lime support for lwmon5
132 Rework Lime support for lwmon5 using new video driver
136 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
138 Date: Fri Jan 11 14:55:16 2008 +0100
140 ppc4xx: Update PMC440 config file
144 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
146 Date: Fri Jan 11 14:55:08 2008 +0100
148 ppx4xx: Fix sdram init on PMC440 boards
152 commit 061aad4d320dddce26247699dcf2875ee2ea1366
154 Date: Thu Jan 10 23:09:33 2008 +0800
156 mpc83xx: Fix the bug of 266MHz data rate DDR
158 The DDR doesn't work on the 266MHz data rate,
159 the patch fix the bug.
164 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
166 Date: Thu Jan 10 23:08:26 2008 +0800
168 mpc83xx: Make the code more readable
170 Format the code, make it more readable
175 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
177 Date: Thu Jan 10 23:07:23 2008 +0800
179 mpc83xx: Reduce the latency of DDR
181 Reduce the AL from 2 to 1 clock to improve the performance.
186 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
188 Date: Thu Jan 10 23:06:05 2008 +0800
190 mpc83xx: Fix the wrong definition of MPC8315E
192 According to the latest user manual of MPC8315E,
193 1) The SVCOD of HRCWL is different than 837x
194 2) The SCCR has changes
199 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
201 Date: Thu Jan 10 23:05:00 2008 +0800
203 mpc83xx: Fix the typo in mpc83xx.h
205 The SPCR about TSEC priority is wrong.
212 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
214 Date: Thu Jan 10 23:04:13 2008 +0800
216 mpc83xx: Fix the typo in global data struct
218 Fix the typo in global_data.h
223 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
225 Date: Thu Jan 10 23:03:03 2008 +0800
227 mpc83xx: Remove cache config from config.h
229 clean up the cache config from configs.h of board
234 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
236 Date: Wed Jan 9 20:57:47 2008 +0300
238 mpc83xx: add support for the MPC8360E-RDK
240 This is MPC8360E based board with:
242 - 8MB Intel Strata NOR flash;
243 - StMICRO 64MiB NAND flash;
244 - two 10/100/1000 ethernet ports connected via Broadcom
246 - two 10/100 ethernet ports connected via National
248 - one PCI and one miniPCI slots;
249 - four serial ports (two NS16550-compatible, two UCCs);
250 - four USB ports working through MPC8360E "FHCI" USB controller;
251 - Fujitsu MB86277 graphics controller;
252 - Analog to Digital Converter/Touchscreen controller, AD7843
255 Features not supported in this patch are:
256 - StMICRO 64MiB NAND flash (patch sent);
257 - MINT framebuffer initialization (patch is pending);
258 - Fetching production information from the EEPROM via I2C;
260 - Two slow UCCs used as RS-485 UARTs.
265 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
267 Date: Wed Jan 9 20:57:40 2008 +0300
269 mpc83xx: add "fsl, qe" compatible fixups
271 New device trees will use "fsl,qe" compatible properties.
276 commit 977b57583a7c34010e566a09a679ec3c1836f996
278 Date: Wed Jan 9 15:24:06 2008 -0600
280 mpc83xx: add missing CONFIG_HAS_ETH0 defines
282 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
283 is defined; add the define to the missing board configs.
285 Thanks to Emilian Medve for finding this.
289 commit b830b7f1635984ba607219fcbd78597c28eeb529
291 Date: Thu Jan 10 14:00:28 2008 -0600
293 86xx: Support 2GB DIMMs
295 Configure the number of bits used to address the banks inside the SDRAM
296 device. The default register value of 0 means 2 bits to address 4 banks.
297 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
301 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
303 Date: Thu Jan 10 18:50:33 2008 +0100
305 ppc4xx: Make Sequoia boot vxWorks
308 TLB 0 a entry for the Machine Check interrupt
309 TLB 1 a entry for the RAM
310 TLB 2 a entry for the EBC
311 TLB 3 a entry for the boot flash
313 After changing the baudrate to 9600 I had no problems to boot the
314 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
319 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
321 Date: Wed Jan 9 23:10:27 2008 -0500
323 ppc4xx: Fix dflush() to restore DVLIM register
327 commit 252f60b068d1f94190b5bcfda169db582387e15e
329 Date: Thu Jan 10 03:52:44 2008 -0500
331 Nios2: remove common/cmd_bdinfo.c unused variable.
336 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
338 Date: Wed Jan 9 18:15:53 2008 -0500
340 Fix Ethernet init() return codes
342 Change return values of init() functions in all Ethernet drivers to conform
348 All drivers going forward should return 0 on success. Current drivers that
349 return 1 on success were left as-is to minimize changes.
358 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
360 Date: Thu Jan 10 00:55:14 2008 +0100
362 Coding Style cleanup; update CHANGELOG
366 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
368 Date: Wed Jan 9 16:56:54 2008 -0600
370 Add QE brg freq and correct qe bus freq fdt update code
375 commit 890dfef06c2d169a3356359596890754dfb8ee1c
377 Date: Wed Jan 9 16:34:51 2008 -0600
379 Remove cache config from ATUM8548 and sbc8548 configs
381 These boards weren't updated by Kumar's config patch because they
382 weren't in the tree, yet.
386 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
388 Date: Mon Jan 7 13:31:19 2008 -0600
390 85xx: add ability to upload QE firmware
392 Define the layout of a binary blob that contains a QE firmware and instructions
393 on how to upload it. Add function qe_upload_firmware() to parse the blob and
394 perform the actual upload. Add command-line command "qe fw" to take a firmware
395 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
396 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
397 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
401 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
403 Date: Tue Jan 8 01:22:21 2008 -0600
405 85xx: Remove cache config from configs.h
407 Either use the standard defines in asm/cache.h or grab the information
408 at runtime from the L1CFG SPR.
410 Also, minor cleanup in cache.h to make the code a bit more readable.
414 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
416 Date: Fri Dec 21 10:39:27 2007 -0500
418 mpc85xx: Add support for ATUM8548 (updated)
420 Add support for Instituto Atlantico's ATUM8548 board
425 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
427 Date: Fri Dec 21 10:36:37 2007 -0500
429 mpc85xx: Add support for ATUM8548 (updated)
431 Add support for Instituto Atlantico's ATUM8548 board
435 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
437 Date: Thu Dec 13 06:45:14 2007 -0600
439 mpc85xx: Add support for SBC8548 (updated)
441 Add support for Wind River's SBC8548 reference board.
445 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
447 Date: Thu Dec 13 06:45:08 2007 -0600
449 mpc85xx: Add support for SBC8548 (updated)
451 Add support for Wind River's SBC8548 reference board.
456 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
458 Date: Mon Oct 22 19:58:19 2007 +0400
460 MPC8568E-MDS: set up QE pario for UART1
462 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
463 be set up appropriately.
467 commit ad162249cb371e9e38971676f09be791e5f3cf4a
469 Date: Mon Oct 22 18:12:46 2007 +0400
471 MPC8568E-MDS: reset UCCs to use them reliably
473 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
476 p.s Similar code exists in the Linux kernel board file (for capability
477 reasons with older U-Boots), but should be removed some day.
481 commit 2146cf56821c3364786ca94a7306008c5824b238
483 Date: Wed Dec 19 01:18:15 2007 -0600
485 Reworked FSL Book-E TLB macros to be more readable
487 The old macros made it difficult to know what WIMGE and perm bits
488 were set for a TLB entry. Actually use the bit masks for these items
489 since they are only a single bit.
491 Also moved the macros into mmu.h out of e500.h since they aren't specific
496 commit 1d47273d46925929f8f2c1913cd96d7257aade88
498 Date: Tue Dec 18 23:21:51 2007 -0600
500 Use FSL Book-E MMU macros from Linux Kernel
502 Grab the FSL Book-E MAS register macros from Linux. Also added
503 defines for page sizes up to 4TB and removed SHAREN since it doesnt
508 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
510 Date: Wed Jan 9 13:51:32 2008 -0600
512 Fix my own merge stupidity
514 Way back in August I merged Heiko's patch:
515 566a494f592: [PCS440EP] upgrade the PCS440EP board
517 with Jon's CONFIG_COMMANDS patches.
519 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
521 However, in the process, I left out some of Heiko's good changes.
523 Now Heiko's and Jon's patches are properly merged in fat_register_device()
527 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
529 Date: Wed Jan 9 11:17:49 2008 -0600
531 Expose parse_line() globally.
533 Add new function readline_into_buffer() that allows the
534 output of readline to be put into a pointer to char buffer.
536 This refactoring allows other functions besides the
537 main command loop to also use the same input mechanism.
542 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
544 Date: Wed Jan 9 01:15:25 2008 +0100
546 trivial: fix consequences of a bad merge
548 Fix what looks like a merge artifact.
552 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
554 Date: Thu Jan 3 10:51:15 2008 +0800
556 Add Ctrl combo key support to usb keyboard driver.
558 Ctrl combo key support is added, which is very useful to input Ctrl-C
559 for interrupt current job.
560 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
561 key input when tstc() is called.
565 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
567 Date: Sun Dec 30 03:30:56 2007 +0100
573 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
575 Date: Sun Dec 30 03:30:46 2007 +0100
577 fix comments with new drivers organization
581 commit a9b410dc7d2a4721c408b13abfc037988150f145
583 Date: Fri Dec 28 12:50:59 2007 +0900
585 Remove the obsolete terse version of do_mii()
587 We now have more useful version of do_mii() and everybody use it.
588 Gerald Van Baren says:
590 > When I originally wrote the mii command 6(!) years ago, I wrote a
591 > verbose version that printed human readable decomposition of the flags,
592 > etc., and a terse one that didn't print as much stuff and thus had a
593 > smaller memory footprint.
595 > It sounds like the terse version has withered and died, apparently
596 > people are only using the verbose version (which is very understandable,
602 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
604 Date: Thu Dec 27 13:42:56 2007 -0500
606 Do not reference sha1.c when building mkimage.
608 remove sha1.o from mkimage linking since it isn't actually used.
612 commit b9173af73e524d37c812f210173cf83385c5171a
614 Date: Thu Dec 27 15:39:54 2007 +0900
616 common/cmd_mii.c: Add sanity argc check
618 If type mii command without arguments, we suffer from uninitialized argv[]
619 entries; for example we MIPS get stuck by TLB error.
623 commit 500856eb1707ed17d9204baa61dd59948d3b2899
625 Date: Wed Jan 9 19:39:36 2008 +0100
627 API for external applications.
629 This is an API for external (standalone) applications running on top of
630 U-Boot, and is meant to be more extensible and robust than the existing
631 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
634 Included is the demo application using this new framework (api_examples).
636 Please note this is still an experimental feature, and is turned off by
641 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
643 Date: Wed Jan 9 12:14:55 2008 -0600
645 86xx: Remove cache config from configs.h
647 Just use the standard defines in asm/cache.h.
651 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
653 Date: Wed Jan 9 18:05:27 2008 +0100
657 The newly introduced API (routines related to env vars) will need to call
662 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
664 Date: Fri Jan 4 12:07:27 2008 -0600
666 Convert MPC8610HPCD to use libfdt.
668 Assumes the presence of the aliases node in the DTS to
669 locate the pci and serial nodes for fixups.
671 Use consistent fdtaddr and fdtfile in environment variables.
675 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
677 Date: Fri Jan 4 11:58:23 2008 -0600
679 8610: Fix lingering compile warnings.
685 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
687 Date: Wed Jan 9 15:14:46 2008 +0100
689 Coding Style cleanup, update CHANGELOG
693 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
695 Date: Tue Dec 18 04:29:55 2007 -0500
697 fix easylogo on big endian dev systems
699 didnt realize how out of shape easylogo actually was until i tried using it.
700 this patch does byte swapping as need be on the input tga header since the tga
701 is in little endian but the host could just as well be big endian. i didnt
702 bother using bswap macros or such stuff from system headers as nothing in
703 POSIX dictates byte swapping functionality.
707 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
709 Date: Tue Dec 18 03:23:25 2007 -0500
713 - make the Makefile not suck
714 - include proper headers for prototypes
715 - fix obvious broken handling of strchr() when handling '.' in filenames
719 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
721 Date: Thu Dec 13 21:23:28 2007 -0500
723 Fix build problems under Cygwin
725 This patch allows u-boot to build without error in a cygwin
726 environment. Cygwin does not define __u64 in it's
727 include/asm/types.h file. The -idirafter flag in the u-boot
728 build causes the inclusion of the cygwin types.h file as opposed
729 to u-bot/include/asm/types.h file which does define __u64.
730 Subsequently, sha1.c compile fails due to unknown symbol.
734 commit 43ef1c381f9195504a2488f5cb909227eb97d475
736 Date: Fri Nov 30 17:29:59 2007 +0100
738 cmd_bmp: Add support for displaying gzip compressed bmps
740 The existing code can show information about a gzip compressed BMP
741 image, but can't actually display it.
743 Therefore, move the decompression code out of bmp_info() and use it in
744 bmp_display() as well in order to display a compressed BMP image.
746 Also, clean things up a bit and fix a memory leak while we're at it.
751 commit d197ffd8172c6fdef38733424640a9a47295d6e9
753 Date: Thu Nov 29 21:15:56 2007 +0100
755 Fix and optimize MII operations on FEC (MPC8xx) controllers
757 This patch fixes several issues at least on a MPC885 based system with two
758 FEC interfaces used in MII mode.
760 1. PHY discovery should first read PHY_PHYIDR2 register and only then
761 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
762 otherwise the values read are wrong. Also notice, that PHY discovery
763 cannot work on MPC88x / MPC87x in setups with both FECs active at all
764 in its present form, because for both interfaces the registers from FEC
765 1 are used to communicate over MII.
767 2. Remove code duplication for resetting the FEC by isolating it into a
770 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
772 4. Optimize mii_init() to only reset the FEC 1 controller once.
774 5. Fix a typo in mii_init() using index i instead of j thus potentially
775 leading to unpredictable results.
779 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
781 Date: Tue Nov 20 13:14:20 2007 +0100
783 Fix endianness conversions in rtl8169 driver
785 It is unclear on what platforms this driver has been tested, since
786 noone up to now defines CONFIG_RTL8169 in the board configuration
787 header. Now it has been fixed for a big-endian mpc8241 based
788 linkstation platform. This patch presents the necessary endianness
793 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
795 Date: Thu Jan 3 10:51:15 2008 +0800
797 Add Ctrl combo key support to usb keyboard driver.
799 Ctrl combo key support is added, which is very useful to input Ctrl-C
800 for interrupt current job.
801 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
802 key input when tstc() is called.
807 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
809 Date: Wed Jan 9 13:43:38 2008 +0100
811 Coding Style clenaup; update CHANGELOG
815 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
817 Date: Thu Dec 27 17:13:11 2007 +0100
819 Remove bit swapping in Xilinx Spartan bitfile loading
821 This patch removes the unnecessary bit swapping when
822 booting .bit files with the 'fpga loadb' command.
826 commit 437fc7327f0611f82937858f2d80e4cd61b40984
828 Date: Thu Dec 27 17:13:05 2007 +0100
830 Fix MSB check in Xilinx Spartan slave serial mode
834 commit 3bff4ffa33729a42645e328a21e8d16488872958
836 Date: Thu Dec 27 17:12:56 2007 +0100
838 Add new Xilinx Spartan FPGA types
842 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
844 Date: Thu Dec 27 17:12:43 2007 +0100
846 Add pre and post configuration callbacks for Spartan FPGAs
848 This patch adds a post configuration callback for Spartan2/3 FPGAs.
849 pre and post configuration callback are now optional and
850 not called when the function pointer is set to NULL.
854 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
856 Date: Thu Dec 27 17:12:34 2007 +0100
858 Improve configuration of FPGA subsystem
860 This patch removes the FPGA subsystem configuration through
861 the CONFIG_FPGA bitmask configuration option.
863 See README for the new options:
866 CONFIG_FPGA_<vendor>,
871 commit 95c6bc7d4a3588b452baca610f8c795a83630477
873 Date: Thu Dec 27 16:55:17 2007 +0100
875 Add Epson RX8025 RTC support
879 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
881 Date: Thu Dec 27 16:57:23 2007 +0100
883 serial: Make default_serial_console() a weak function
885 With this patch it is possible to reimplement default_serial_console()
886 in board specific code. This will be done in the upcomming PMC440
887 U-Boot port. This also allows the lwmon board maintainer to
888 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
892 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
894 Date: Wed Dec 19 14:14:47 2007 +0100
896 add 'terminal program' functionality
898 This patch adds a 'cu' like serial terminal command to u-boot
899 using which you can access other serial ports from the system console.
901 OpenMoko uses this in their Neo1973 phones to get access to the GSM
902 Modem and GPS chip from the bootloader.
906 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
908 Date: Wed Dec 19 14:12:53 2007 +0100
910 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
911 that used to exist with the legacy NAND code
915 commit f540c42d9564854b19ce9bbb70affe172529fe70
917 Date: Wed Dec 19 14:09:58 2007 +0100
919 Fix building with CRAMFS but not JFFS2 support
923 commit 23d0baf967fecdaf1804f045f6339337c5607eec
925 Date: Sat Dec 22 15:52:58 2007 +0100
927 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
932 commit 23776ff292966a85d811126933830bed48211826
934 Date: Tue Dec 11 10:53:12 2007 +0100
936 ARM: support board-specific ethernet PHY init
938 Add until the new phylib will be arrived
942 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
944 Date: Sat Dec 8 16:34:08 2007 +0100
946 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
950 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
952 Date: Sun Dec 9 11:01:10 2007 +0100
954 Add missing file in gitignore and comments
956 based on Linux source tree's .gitignore files
960 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
962 Date: Wed Jan 9 11:36:21 2008 +0100
964 Coding Style cleanup, update CHANGELOG
968 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
970 Date: Wed Jan 9 10:38:58 2008 +0100
972 POST: Execute SPR test after relocation
974 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
975 self modifying code and this doesn't work with stack in d-cache, since
976 I can't move the code from d-cache to i-cache. We move the SPR test to
977 be executed a little later, after relocation. Then stack is located in
978 SDRAM and this self-modifying code is no problem anymore.
982 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
984 Date: Wed Jan 9 10:28:20 2008 +0100
986 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
988 This patch configures the LWMON5 port to use d-cache as init-ram and
989 the unused GPT0_COMP6 as POST WORD storage.
993 commit 1754f50b710194f886b6f2831803d8960171a14d
995 Date: Wed Jan 9 10:25:46 2008 +0100
997 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
999 The privious 4xx POST implementation only supported storing the POST
1000 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
1001 we need to store the POST WORD in some other non volatile location.
1002 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
1007 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
1009 Date: Wed Jan 9 10:23:16 2008 +0100
1011 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
1013 This patch adds support for locking the init-ram/stack in d-cache,
1014 so that other regions may use d-cache as well
1016 Note, that this current implementation locks exactly 4k of d-cache,
1017 so please make sure that you don't define a bigger init-ram area. Take
1018 a look at the lwmon5 440EPx implementation as a reference.
1022 commit 0ddb89601a8d29e808db450366752ffdc6267c53
1024 Date: Wed Jan 9 10:16:33 2008 +0100
1026 Fix memset bug in ext2fs_read_file()
1028 ext2fs_read_file() had the function arguments swapped.
1030 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
1034 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
1036 Date: Tue Jan 5 08:17:15 1988 +0100
1038 Fix problems with usb storage devices on MPC5200 /TQM5200
1040 The MPC5200 OHCI controller operates in big endian, so
1041 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
1045 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
1047 Date: Tue Jan 8 22:58:27 2008 +0100
1049 Fix compile problem with new env code.
1053 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
1055 Date: Tue Nov 27 10:23:20 2007 +0100
1057 tools: fix fw_printenv tool to compile again
1059 This patch updates the fw_printenv/fw_setenv userspace tool to include
1060 the correct MTD header in order to compile against current kernel
1061 headers. Backward compatibility is preserved by introducing an option
1062 MTD_VERSION which can be set to "old" for compilation using the old MTD
1063 headers. Along with this a number of warnings are fixed.
1067 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
1069 Date: Tue Jan 8 15:40:09 2008 +0100
1071 ppc4xx: assign PCI interrupts on seuqoia boards
1073 Some operating systems rely on assigned PCI interrupts.
1077 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
1079 Date: Tue Jan 8 15:50:49 2008 +0100
1081 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
1083 This patch allows the use of 4xx interrupt vector number defines
1084 in board specific code outside cpu/ppc4xx.
1088 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
1090 Date: Tue Jan 8 15:39:01 2008 +0100
1092 ppc4xx: Fix UIC2 vector number base
1096 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
1098 Date: Tue Jan 8 12:49:58 2008 +0100
1100 ppc4xx: Update PLB/PCI divider for PMC440 board
1102 This patch updates the PLB/PCI divider when running at
1103 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
1107 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
1109 Date: Tue Jan 8 11:13:09 2008 +0100
1111 ppc4xx: Disable error message when no NAND chip is installed on PMC440
1113 Add CFG_NAND_QUIET_TEST option to disable error message when
1114 no NAND chip is installed on PMC440 boards.
1116 Disable a couple of config defines that are only used for NAND_U_BOOT.
1120 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
1122 Date: Tue Jan 8 22:58:27 2008 +0100
1124 Fix compile problem with new env code.
1128 commit 6de66b35426312a21174a9bf0576a094e2904bea
1130 Date: Tue Nov 27 10:23:20 2007 +0100
1132 tools: fix fw_printenv tool to compile again
1134 This patch updates the fw_printenv/fw_setenv userspace tool to include
1135 the correct MTD header in order to compile against current kernel
1136 headers. Backward compatibility is preserved by introducing an option
1137 MTD_VERSION which can be set to "old" for compilation using the old MTD
1138 headers. Along with this a number of warnings are fixed.
1142 commit ad3006fe7e84667021753b74247b0bafd97ba35f
1144 Date: Mon Jan 7 23:47:32 2008 -0500
1146 LIBFDT: use memmove() instead of memcpy()
1148 This is partial patch from the DTC/libfdt
1149 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
1151 Date: Wed Nov 21 11:56:14 2007 +1100
1153 The patch also fixes one genuine bug caught by valgrind -
1154 _packblocks() in fdt_rw.c was using memcpy() where it should have been
1159 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
1161 Date: Mon Dec 17 14:42:07 2007 +1100
1163 libfdt: Add more documentation (patch the seventh)
1165 This patch adds more documenting comments to libfdt.h. Specifically,
1166 these document the read/write functions (not including fdt_open_into()
1167 and fdt_pack(), for now).
1171 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
1173 Date: Mon Dec 17 14:41:52 2007 +1100
1175 libfdt: Add more documentation (patch the sixth)
1177 This patch adds some more documenting comments to libfdt.h.
1178 Specifically this documents all the write-in-place functions.
1182 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
1184 Date: Sat Dec 29 22:45:27 2007 -0500
1186 Fine grained per property /chosen updating.
1188 Implement a suggestion by Scott Wood to make the /chosen handling fine
1189 grained. Don't overwrite pre-existing properties on a per-property basis,
1190 so if /chosen exists but a necessary /chosen/property doesn't, it gets
1191 created. If a /chosen property exists, it is NOT overwritten unless the
1192 "force" flag is true.
1196 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
1198 Date: Sat Jan 5 15:33:29 2008 -0500
1200 Improve the FDT help message.
1202 Add a note that "fdt copy" makes the new address active.
1203 Remove most of the extra hints at the end of the fdt help.
1207 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
1209 Date: Sat Jan 5 14:52:04 2008 -0500
1211 Support setting FDT properties with optional values.
1213 Fix a bug found and documented by Bartlomiej Sieka where the optional
1214 value on "fdt set <path> <prop> [<val>]" wasn't optional.
1216 => fdt mknode / testnode
1217 => fdt print /testnode
1220 => fdt set /testnode testprop
1221 => fdt print /testnode
1228 commit 22fb2246df91bfc840d87f0c5910818bad55577a
1230 Date: Fri Dec 28 11:56:30 2007 +0100
1232 Add fdt_find_and_setprop() to fdt_support.h
1234 fdt_find_and_setprop() is used by several 4xx boards and it's
1235 missing in the appropriate header. This patch eliminates a
1236 warning when building U-Boot for such boards.
1241 commit 802b769bac17b0560d3535a42c502469ee190cd1
1243 Date: Tue Jan 8 18:39:30 2008 +0100
1245 ppc4xx: Return 0 on success in 4xx ethernet driver
1249 commit 6775c68683a53c7abc778774641aac6f833a2cbf
1251 Date: Tue Jan 8 09:59:49 2008 -0600
1253 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
1257 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
1259 Date: Thu Dec 20 16:28:34 2007 -0600
1261 mpc83xx: rm remaining FLAT_TREE code
1263 ..in board pci.c files
1267 commit b3458d2cd55d01732e30a76d898afd99e871cd67
1269 Date: Thu Dec 20 15:57:28 2007 -0600
1271 mpc83xx: remove FLAT_TREE code
1273 need to rm it from pci code, too!
1277 commit 5b8bc606c61456566af6912f818a153b6b06f242
1279 Date: Thu Dec 20 14:09:22 2007 -0600
1281 mpc83xx: convert to using do_fixup_*()
1283 convert to using simpler mpc85xx style fdt update code; streamline by
1284 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
1285 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
1286 converted over to using libfdt).
1290 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
1292 Date: Thu Dec 20 12:58:51 2007 -0500
1294 sbc8349: enable libfdt by default on WRS SBC8349 board.
1296 Make libfdt the default for the WRS SBC8349 board.
1297 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
1298 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
1302 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
1304 Date: Thu Dec 20 12:58:16 2007 -0500
1306 sbc8349: migrate board to libfdt
1308 This adds libfdt support code for the Wind River sbc8349 board.
1310 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
1311 the other Freescale 83xx boards.
1315 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
1317 Date: Thu Dec 20 12:56:19 2007 -0500
1319 sbc8349: Remove board specific ECC code
1321 ECC code is now shared for all 83xx boards, so remove board specific one.
1322 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
1326 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
1328 Date: Thu Dec 20 01:30:48 2007 -0600
1330 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
1332 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
1336 commit ccf21c311e68d48399eff1e72936052885f6e3f7
1338 Date: Thu Dec 6 16:43:40 2007 +0100
1340 Add support CONFIG_UEC_ETH3 in MPC83xx
1344 commit e6af9932d31171e35db880e7b2f29f903b1b7660
1346 Date: Mon Nov 26 11:00:54 2007 -0600
1348 Remove CONFIG options related to OF that we dont use
1350 The MPC8360E MDS config defined:
1352 CONFIG_OF_HAS_UBOOT_ENV
1354 Which we don't use or ever needed. This seems like copy-paste feature creep.
1358 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
1360 Date: Mon Dec 10 14:16:22 2007 -0600
1362 mpc83xx: supress compiler warning
1364 mpc8360emds.c: In function ‘ft_board_setup’:
1365 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
1366 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
1370 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
1372 Date: Tue Nov 27 14:17:29 2007 -0600
1374 mpc83xx: fix remaining fdt_find_node_by_path references
1376 rename to fdt_path_offset
1380 commit 921d4b19ad1be704df58725485d9292dc0414adf
1382 Date: Mon Nov 19 12:30:09 2007 -0600
1384 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
1386 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
1387 This change guarantees that the environment will be located on the
1388 first flash sector after the U-Boot image.
1392 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
1394 Date: Fri Nov 9 14:28:08 2007 -0600
1396 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
1398 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
1399 properties in the device tree so the PHY gets configured for internal delay on
1400 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
1404 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
1406 Date: Tue Sep 18 12:41:15 2007 +0800
1408 mpc83xx: update the CREDITS and MAINTAINERS
1410 update the CREDITS and MAINTAINERS.
1414 commit b21add4b42af7b767448251b599b91066a160e0d
1416 Date: Tue Sep 18 12:40:21 2007 +0800
1418 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
1420 Add the MAINTAINER and MAKEALL entries for mpc837xemds
1424 commit f8900ce9094c462355eb792eea264ff16ac8fd16
1426 Date: Tue Sep 18 12:38:53 2007 +0800
1428 mpc83xx: Add the MPC837xEMDS board readme
1430 Add the README.mpc837xemds to /doc
1434 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
1436 Date: Tue Sep 18 12:37:57 2007 +0800
1438 mpc83xx: Add the support of MPC837xEMDS board
1440 The MPC837xEMDS board support:
1441 * DDR2 400MHz hardcoded and SPD init
1442 * Local bus NOR Flash
1443 * I2C, UART, MII and RTC
1449 commit 555da61702771fe0f76f3de23b4e7590f3704161
1451 Date: Tue Sep 18 12:36:58 2007 +0800
1453 mpc83xx: Add the support of MPC8315E SoC
1455 The MPC8315E SoC including e300c3 core and new IP blocks,
1456 such as TDM, PCI Express and SATA controller.
1460 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
1462 Date: Tue Sep 18 12:36:11 2007 +0800
1464 mpc83xx: Add the support of MPC837x SoC
1466 The MPC837x SoC including e300c4 core and new IP blocks,
1467 such as SDHC, PCI Express and SATA controller.
1471 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
1473 Date: Wed Nov 14 18:54:53 2007 +0300
1475 MPC8360E-MDS: configure and enable second UART
1477 Despite user manual, BCSR9.7 is negated (high) on HRST, so
1478 UART2 is disabled. Fix that and configure QE pins properly.
1482 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
1484 Date: Mon Nov 5 09:34:06 2007 -0600
1486 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
1488 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
1489 currently-defined 83xx boards. This change guarantees that the environment
1490 will be located on the first flash sector after the U-Boot image.
1495 commit e05329516a13616b53240cd85b739217c2bf87f1
1497 Date: Fri Jan 4 13:27:02 2008 -0500
1499 ppc4xx: Remove weak binding from common Denali data-eye search code
1501 Now that there are no board-specific versions of
1502 "denali_core_search_data_eye()", the weak binding on the common version
1507 commit 5ba576c01602fd328800a427964c36a0a05c5dce
1509 Date: Sat Jan 5 09:13:46 2008 +0100
1511 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
1515 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
1517 Date: Sat Jan 5 09:12:41 2008 +0100
1519 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
1521 On Katmai the complete auto-calibration somehow doesn't seem to
1522 produce the best results, meaning optimal values for RQFD/RFFD.
1523 This was discovered by GDA using a high bandwidth scope,
1524 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
1525 so now on Katmai "only" RFFD is auto-calibrated.
1527 This patch also adds RDCC calibration as mentioned on page 7 of
1528 the AMCC PowerPC440SP/SPe DDR2 application note:
1529 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
1533 commit 49db47b8ae6afff2b898be312948ff501357dc80
1535 Date: Wed Jan 2 16:48:42 2008 +0100
1537 ppc4xx: Remove sdram.h from PMC440 board
1541 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
1543 Date: Wed Jan 2 16:48:34 2008 +0100
1545 ppc4xx: use common denali core defines and data eye search code for PMC440
1549 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
1551 Date: Wed Jan 2 12:05:14 2008 +0100
1553 ppc4xx: More cleanup for esd's LCD code
1557 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
1559 Date: Fri Jan 4 12:00:01 2008 +0100
1561 ppc4xx: Fix Sequoia NAND booting target
1563 The Sequoia NAND booting target now uses the recently extracted
1564 cpu/ppc4xx/denali_data_eye.c file too.
1568 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
1570 Date: Thu Jan 3 15:02:02 2008 -0500
1572 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
1576 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
1578 Date: Fri Jan 4 02:11:56 2008 -0500
1580 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
1582 Note: this patch changes the configuration of some GPIO registers:
1584 Register Old Value New Value
1585 --------------- ---------- ----------
1586 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
1587 DCR GPIO0_TSRH 0x55005000 0x00000000
1588 DCR GPIO1_TCR 0xC2000000 0xE2000000
1589 DCR GPIO1_TSRL 0x0C000000 0x00200000
1590 DCR GPIO1_ISR2L 0x00050000 0x00110000
1594 commit 5ab884b254ca2e707ab50545cd705f30108cf491
1596 Date: Thu Jan 3 18:54:00 2008 -0500
1598 ppc4xx: Add functionality to GPIO support
1600 This patch makes two additions to GPIO support:
1602 First, it adds function gpio_read_in_bit() to read the a bit from the
1603 GPIO Input Register (GPIOx_IR) in the same way that function
1604 gpio_read_out_bit() reads a bit from the GPIO Output Register
1607 Second, it modifies function gpio_set_chip_configuration() to provide
1608 an additional option for configuring the GPIO from the
1609 "CFG_4xx_GPIO_TABLE".
1611 According to the 440EPx User's Manual, when an alternate output is used,
1612 the three-state control is configured in one of two ways, depending on
1613 the particular output. The first option is to select the corresponding
1614 alternate three-state control in the GPIOx_TRSH/L registers. The second
1615 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
1616 the GPIOx_TRSH/L registers, and set the corresponding bit in the
1617 GPIOx_TCR register to enable the output. For example, the Manual
1618 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
1619 the alternate three-state control (first option), and specifies
1620 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
1621 enabled in the GPIOx_TCR register (second option).
1623 Currently, gpio_set_chip_configuration() configures all alternate signal
1624 outputs to use the first option. This patch allow the second option to
1625 be selected by setting the "out_val" element in the table entry to
1626 "GPIO_OUT_1". The first option is used when the "out_val" element is
1627 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
1628 alternate signal is selected, and because all current GPIO tables set
1629 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
1630 not change any existing configurations.
1634 commit 196404cdc1de495d6182e84731c200fc5748df15
1636 Date: Sun Dec 30 01:01:54 2007 -0500
1638 PPC4xx: Remove sdram.h from board/lwmon5
1640 These definitions are now in "include/ppc440.h".
1644 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
1646 Date: Sun Dec 30 01:01:32 2007 -0500
1648 PPC4xx: Use common code for LWMON5 board SDRAM support
1650 This patch also modifies the functionality of the code so that the data-eye
1651 search is now done with with the cache disabled.
1655 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
1657 Date: Sun Dec 30 01:01:14 2007 -0500
1659 PPC4xx: Remove sdram.h from board/amcc/sequoia
1661 These definitions are now in "include/ppc440.h".
1665 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
1667 Date: Sun Dec 30 01:00:50 2007 -0500
1669 PPC4xx: Use common code for Sequoia board SDRAM support
1673 commit 8b0c5c127690335758100c25eaec2b84db97c101
1675 Date: Thu Dec 27 16:58:41 2007 +0100
1677 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
1679 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
1680 networking stack does not automatically switch to
1681 another interface. This patch does not touch the default
1687 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
1689 Date: Thu Nov 29 12:16:13 2007 +0530
1691 NET: Proper return code handling in eth_init() function in file eth.c
1693 This patch modifies the return code handling in the eth_init()
1694 function, to be compatible with the handling of the return codes in
1695 the other network stack files. It now returns a 0 on Success and -1 on
1701 commit 5ca2d0953e4579a80810966cca2077e20d912c97
1703 Date: Mon Nov 19 20:27:04 2007 +0900
1705 net/eth.c: Fix env_enetaddr signed overflow
1707 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
1710 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
1718 Warning: NEC-Candy MAC addresses don't match:
1719 Address in SROM is 00:00:4C:80:92:A2
1720 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
1722 This patch changes env_enetaddr type from `char' to `unsigned char'.
1728 commit f85b60710571b37293d2233933b76e2aa3db5635
1730 Date: Thu Dec 27 18:19:02 2007 +0100
1732 Introduce new eth_receive routine
1734 The purpose of this routine is receiving a single network frame, outside of
1735 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
1736 U-Boot will let them utilise networking facilities. For sending a raw frame
1737 the already existing eth_send() can be used.
1739 The direct consumer of this routine is the newly introduced API layer for
1740 external applications (enabled with CONFIG_API).
1746 commit 5c740711f0ea5b51414b341b71597c4a0751be74
1748 Date: Thu Jan 3 10:41:04 2008 -0600
1750 8610: Move include of config.h earlier.
1752 Include config.h earlier in the set of #includes
1753 so as to avoid a incidental and duplicate definition
1754 of CFG_CACHELINE_SIZE.
1756 Signed-off-by: Jon Loeliger
1758 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
1760 Date: Tue Dec 4 10:53:34 2007 -0600
1762 Don't slam #undef DEBUG in the 8641HPCN config file.
1764 Doing so prevents it from being individually set
1765 and useful in other files.
1769 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
1771 Date: Wed Nov 28 14:47:18 2007 -0600
1773 Convert MPC8641HPCN to use libfdt.
1775 Assumes the presence of the aliases node in the DTS to
1776 locate the ethernet, pci and serial nodes for fixups.
1778 Use consistent fdtaddr and fdtfile in environment variables.
1782 commit ce37422d0002e10490e268392e0c4e3028e52cec
1784 Date: Wed Jan 2 14:06:26 2008 +0100
1786 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
1788 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
1789 flash chips connected to a 32bit wide port.
1793 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
1795 Date: Wed Jan 2 15:58:44 2008 +0100
1797 Fix compile problem introduced by "cleanup" commit 3dfd708c
1801 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
1803 Date: Wed Jan 2 15:54:45 2008 +0100
1805 Make scripts and Makefiles POSIX compliant
1807 The bash builtin versions of the "test" (resp. "[") command allow
1808 using "==" for string comparisons, but POSIX compatible implemen-
1809 tations (like /usr/bin/test) insist on using "=" only. On such systems
1812 $ /usr/bin/test a == a && echo OK
1813 /usr/bin/test: ==: binary operator expected
1815 This patch fixes Makefiles and scripts to use POSIX style.
1819 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
1821 Date: Wed Jan 2 12:38:43 2008 +0100
1823 Minor coding style cleanup.
1827 commit e174ac34adf5d5653df12bc3cf19c52063a71269
1829 Date: Fri Dec 28 17:29:56 2007 +0100
1831 ppc4xx: Coding style cleanup
1835 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
1837 Date: Fri Dec 28 17:07:24 2007 +0100
1839 ppc4xx: Complete PMC440 board support
1841 This patch brings the PMC440 board configuration file.
1842 Finally it enables the PMC440 board support.
1846 commit 407843a582560fc5231299561ab3c2b6b6cd3397
1848 Date: Fri Dec 28 17:07:18 2007 +0100
1850 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
1852 This patch adds some BSP commands and FPGA booting support
1853 for esd's PMC440 boards.
1857 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
1859 Date: Fri Dec 28 17:07:14 2007 +0100
1861 ppc4xx: Add initial esd PMC440 board files
1863 This patch adds the first files for the new esd PMC440 boards.
1864 The next two patches will complete the PMC440 board support.
1868 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
1870 Date: Fri Dec 28 17:10:36 2007 +0100
1872 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
1874 - add EEPROM write protection for esd PLU405 boards.
1875 - initialize NAND GPIOs
1876 - use correct io accessors
1881 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
1883 Date: Fri Dec 28 17:10:44 2007 +0100
1885 ppc4xx: use correct io accessors for esd's LCD code
1887 This patch fixes esd's LCD dectection code to work correctly with
1892 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
1894 Date: Fri Dec 28 17:10:42 2007 +0100
1896 ppc4xx: Maintenance patch for VOH405 boards
1898 - add EEPROM write protection
1899 - initialize NAND GPIOs
1900 - use correct io accessors
1901 - slow down I2C clock to 100kHz
1902 - enable ext. I2C bus
1907 commit c05569066dbcba3fdf36d4d1943df265dc316a86
1909 Date: Fri Dec 28 16:08:08 2007 +0100
1911 ppc4xx: Enable 405EP PCI arbiter per default on all boards
1913 In an attmemt to clean up the 4xx start.S file, I removed the enabling
1914 of the internal 405EP PCI arbiter. This is needed for multiple other
1915 405EP platforms, like most of the esd 405EP. Now the internal PCI
1916 arbiter is enabled again per default as it has been before.
1921 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
1923 Date: Fri Dec 28 15:53:46 2007 +0100
1925 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
1930 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
1932 Date: Fri Dec 28 06:06:04 2007 +0100
1934 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
1936 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
1937 platforms mentioned above.
1941 commit b568fd25574181a3b12ae3d66b2913903442cb83
1943 Date: Thu Dec 27 17:03:46 2007 +0100
1945 Remove CPCI440 board
1947 This board never left prototyping state and it
1948 became a millstone round my neck. So remove it.
1952 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
1954 Date: Thu Dec 27 11:28:51 2007 -0500
1956 Add support for Korat PPC440EPx board
1958 These patches add support for the PPC440EPx-based "Korat" board to
1959 U-Boot. They are based primarily on support for the Sequoia board.
1963 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
1965 Date: Sat Dec 22 15:16:25 2007 -0500
1967 Add configuration file for Korat board
1969 This patch supplies the configuration file for the Korat PPC440EPx-
1974 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
1976 Date: Sat Dec 22 15:16:11 2007 -0500
1978 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
1982 commit aba19604d848b2838cfb9ebe818909e6a216058e
1984 Date: Thu Dec 27 10:54:48 2007 -0500
1986 Add 440EPx DDR2 SPD DIMM support
1988 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
1989 controller. It should also work on the 440GRx. It is based on the DDR2
1990 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
1992 This code has been tested on prototype Korat boards with three Kingston
1993 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
1994 (two ranks). The Korat board has a single DIMM socket, but support has
1995 been provided (though not tested) for boards with two DIMM sockets.
1999 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
2001 Date: Sat Dec 22 15:15:30 2007 -0500
2003 Copy 440EPx/GRx SDRAM data-eye search to common directory
2005 This patch creates a non-board-specific file for performing the SDRAM
2006 data-eye search. It also adds ECC error checking to the test of valid
2007 data on readback when ECC is enabled.
2011 commit c46f53333b22b1f9098676bea8884fc7db820cf3
2013 Date: Sat Dec 22 15:15:13 2007 -0500
2015 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
2017 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
2018 It also fixes two typos in the definitions, so the board-specific
2019 "sdram.h" files containing these definitions are also fixed to avoid
2024 commit c348578bf612d0c56d8d376d23cae16defbd86af
2026 Date: Thu Dec 27 10:50:55 2007 -0500
2028 Add Ethernet 1000BASE-X support for PPC4xx
2030 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
2031 is defined, the PHY will advertise it's capabilities for autonegotiation
2032 based on the capabilities shown in the PHY's status registers, including
2033 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
2034 advertise hard-coded capabilities, as before.
2038 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
2040 Date: Thu Dec 27 09:52:17 2007 -0500
2042 Add driver for National Semiconductor LM73 temperature sensor
2044 This driver is based on the driver for the LM75.
2048 commit 12618278688ea9b3d76536960a5ad2e3790fac40
2050 Date: Sat Dec 22 15:14:00 2007 -0500
2052 Add driver for STMicroelectronics M41T60 RTC
2054 This driver is based on the driver for the M41T11. In the intended
2055 application, the RTC will be powered by a large capacitor, rather than a
2056 battery. The driver therefore checks to see whether the RTC has lost
2057 power. The chip's OUT bit is normally reset from its power-up state. If
2058 the OUT bit is read as set, or if the date and time are not valid, then the
2059 RTC is assumed to have lost power, and its date and time are reset to
2060 1900-01-01 00:00:00.
2062 Support for adjusting the speed of the clock to improve accuracy is
2063 provided through an environment variable.
2067 commit d3471173e14b7544bb60339eda8d3d3906694b0a
2069 Date: Sat Dec 22 15:34:39 2007 -0500
2071 Use out_be32() and friends to access memory-mapped registers in sequoia.c
2075 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
2077 Date: Sat Dec 22 15:34:20 2007 -0500
2079 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
2083 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
2085 Date: Sat Dec 22 15:23:50 2007 -0500
2087 Cosmetic changes to ECC POST for AMCC Denali core
2091 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
2093 Date: Wed Dec 26 20:20:19 2007 +0100
2095 ppc4xx: Fix compilation problem in 405 cache POST test
2099 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
2101 Date: Sat Dec 22 12:20:09 2007 +0100
2103 ppc4xx: Move virtual address of POST cache test to bigger address
2105 On Sequoia & LWMON5 the virtual address of the POST cache test is now
2106 moved to a bigger address. This enables usage of more memory on those
2111 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
2113 Date: Sat Dec 22 12:18:26 2007 +0100
2115 ppc4xx: Fix problem in 44x cache POST routine
2117 As repoted by Larry Johnson, running "diag run cache" caused a crash
2118 in U-Boot. This problem was introduced by a patch that removed the
2119 TLB entry for the cache test after the test has completed. Since this
2120 TLB was only setup once, a 2nd attempt to run this cache test
2121 failed with a crash. Now this TLB entry is created every time the
2126 commit b0265b576bb8fa9465f99e99c323768b562fadc2
2128 Date: Fri Dec 21 07:51:29 2007 +0100
2130 ppc4xx: Update Makalu fdt support
2134 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
2136 Date: Wed Dec 19 09:05:40 2007 +0100
2138 ppc4xx: Add fdt support to AMCC Katmai eval board
2142 commit 328a340392a5df9aaf00792be989df73e750859e
2144 Date: Tue Dec 18 08:44:51 2007 +0100
2146 ppc4xx: fdt: Cleanup setup of cpu node setup
2148 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
2149 without using the absolute path to the cpu node. This makes it possible
2150 to use this U-Boot version with both versions of cpu-node naming
2151 "cpu@0" and the former "PowerPC,440EPx@0".
2155 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
2157 Date: Mon Dec 17 17:26:21 2007 +0100
2159 ppc4xx: Fix lwmon5 compilation problem
2161 Now that the 440EPx ECC test is not board specific anymore
2162 remove this Makefile.
2166 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
2168 Date: Wed Dec 5 17:43:20 2007 +0100
2170 Fix ppc4xx clear_bss() code
2172 ppc4xx clear_bss() fails if BSS segment size is not
2173 divisible by 4 without remainder. This patch provides
2174 fix for this problem.
2178 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
2180 Date: Fri Nov 30 18:35:11 2007 +0100
2182 PPC4xx: Minimal changes to add vxWorks support
2186 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
2188 Date: Fri Nov 23 13:09:18 2007 +0100
2190 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
2192 When using dhcp/bootp the "netmask" environment variable is not
2193 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
2194 desireable, so the following patch adds this this option to the board
2200 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
2202 Date: Sat Oct 27 12:48:15 2007 -0400
2204 Fix/enhance ECC POST for 440EPx/GRx
2206 This patch allows the ECC POST to be used for different boards with the
2207 PPC440 Denali SDRAM controller. Modifications include skipping the test
2208 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
2209 to prevent timing errors.
2213 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
2215 Date: Sat Oct 27 12:48:05 2007 -0400
2217 PPC4xx: Move/rename ECC POST for 440EPx/GRx
2221 commit c29d2d3680046d430022c55e50fcb27f5866517e
2223 Date: Fri Dec 14 11:20:33 2007 +0100
2225 ppc4xx: use correct io accessors for 4xx ethernet POST
2229 commit ba79fde58a48c0a6ff8e2a96caba951594142203
2231 Date: Fri Dec 14 11:19:56 2007 +0100
2233 ppc4xx: fix flush + invalidate_dcache_range arguments
2235 flush + invalidate_dcache_range() expect the start and stop+1 address.
2236 So the stop address is the first address behind (!) the range.
2240 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
2242 Date: Fri Dec 14 08:41:29 2007 +0100
2244 ppc4xx: fdt: use fdt_fixup_ethernet()
2246 By using aliases in the dts file, the ethernet node fixup is
2247 much easier with the recently added functions.
2249 Please note that the dts file needs the aliases for this to work.
2253 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
2255 Date: Thu Dec 13 14:52:53 2007 +0100
2257 ppc4xx: Bring 4xx fdt support up-to-date
2259 This patch update the 4xx fdt support. It enabled fdt booting
2260 on the AMCC Kilauea and Sequoia for now. More can follow later
2265 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
2267 Date: Thu Dec 27 07:50:54 2007 +0100
2269 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
2271 The check for an sufficiently erased destination was missing in the
2272 buffered write function of the cfi flash driver (when
2273 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
2274 writing to such a region will fail with the currect error message.
2278 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
2280 Date: Mon Nov 12 10:56:17 2007 +0100
2282 Some configuration updates for the TQM5200 based TB5200 board:
2284 - enable command line history
2285 - increase malloc space (because of bigger flash sectors)
2289 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
2291 Date: Thu Sep 27 11:10:08 2007 +0200
2293 TQM8xx: use the CFI flash driver on all TQM8xx boards
2297 commit 11d9eec479b470eab9242ab937fca70a876d9376
2299 Date: Wed Sep 26 17:55:56 2007 +0200
2301 TQM885D: adjust for doubled flash sector size + some minor fixes
2305 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
2307 Date: Wed Sep 26 17:55:54 2007 +0200
2309 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
2311 CAS-Latency=2, Write Recovery Time tWR=2
2312 The max. supported bus frequency is 66 MHz. Therefore, changed
2313 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
2317 commit b988b8cd443989be65161888eea0127ad03f846f
2319 Date: Wed Sep 26 17:55:56 2007 +0200
2321 TQM885D: use calculated cpuclk instead of measuring it
2323 On the TQM885D the measurement of cpuclk with the PIT reference
2324 timer ist not necessary. Since all module variants use the same
2325 external 10 MHz oscillator, the cpuclk only depends on the PLL
2326 configuration - which is readable by software.
2330 commit 492c7049869348d31168de8dad89651315e468e0
2332 Date: Thu Sep 27 14:54:46 2007 +0200
2334 TQM885D: fix SDRAM refresh
2336 At 133 MHz the current SDRAM refresh rate is too fast
2337 (measured 4 * 1.17 us).
2338 CFG_MAMR_PTA changes from 39 to 128. This result
2339 in a refresh rate of 4 * 7.8 us at the default clock
2340 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
2341 This is a compromise until a new method is found to
2342 adjust the refresh rate.
2346 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
2348 Date: Thu Sep 27 14:54:46 2007 +0200
2350 TQM860M: Support for 10col SDRAMs, max. 128 MiB
2354 commit 61fb15c516fef5631e305f1976d7b3a679725856
2356 Date: Thu Dec 27 01:52:50 2007 +0100
2358 Fix coding style issues; update CHANGELOG.
2362 commit 467bcee11fe26ad422f2de971aa70866079870f2
2364 Date: Fri Dec 14 15:36:18 2007 +0100
2366 cfi_flash: Add manufacturer-specific fixups
2368 Run fixups based on the JEDEC manufacturer ID independent of the
2371 This changes current behaviour: Previously, geometry reversal for AMD
2372 chips were done based on the command set ID, while they are now done
2373 based on the JEDEC manufacturer and device ID.
2375 Also add fixup for top-boot Atmel chips. A fixup is needed for
2376 AT49BV6416(T) too, but since u-boot currently only reads the low byte
2377 of the device ID, there's no way to tell it apart from AT49BV642D,
2378 which should not have this fixup. Since AT49BV642D support is
2379 necessary to get ATNGW100 board support into mainline, I've commented
2380 out the fixup for now.
2384 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
2386 Date: Fri Dec 14 15:36:17 2007 +0100
2388 cfi_flash: Add cmdset-specific init functions
2390 Move things like reading JEDEC IDs and fixing up geometry reversal
2391 into separate functions. The geometry reversal fixup is now performed
2392 by altering the qry structure directly, which makes the sector init
2393 code slightly cleaner.
2397 commit e23741f4a6d8047520ef0d4971762749b3587d32
2399 Date: Fri Dec 14 15:36:16 2007 +0100
2401 cfi_flash: Read whole QRY structure in one go
2403 Read out the whole CFI Standard Query structure after successful cfi
2404 identification. This allows subsequent code to access this information
2405 directly without having to go through flash_read_uchar() and friends.
2409 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
2411 Date: Mon Dec 17 11:02:44 2007 +0100
2413 AVR32: Fix logic inversion in disable_interrupts()
2415 disable_interrupts() should return nonzero if interrupts were
2416 _enabled_ before, not disabled.
2420 commit acac475212cbedb17b321a363a1c878e2b47b37f
2422 Date: Fri Dec 14 16:51:22 2007 +0100
2424 AVR32: Enable interrupts at bootup
2426 The timer code depends on the timer interrupt to keep track of the
2427 upper 32 bits of the cycle counter. This obviously doesn't work when
2428 interrupts are disabled the whole time.
2432 commit 9570bcd87f4db255514f43b6701746c412f8fef0
2434 Date: Thu Nov 15 10:03:45 2007 +0100
2436 AVR32: Fix wrong pin setup for USART3
2438 As reported by Gerhard Berghofer:
2440 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
2441 instead of PB18 and PB19.
2443 which is obviously correct. There's currently no code that uses
2444 USART3, but custom boards may run into problems.
2448 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
2450 Date: Thu Nov 1 12:44:20 2007 +0100
2452 README: Remove ATSTK1000 daughterboard list
2454 As noted by Kim Phillips, these lists tend to become out of date.
2458 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
2460 Date: Tue Oct 30 14:56:36 2007 +0100
2462 Add ATSTK100[234] to MAINTAINERS
2464 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
2465 "mother". Also update the entry for ATSTK1000 to be not only about the
2466 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
2470 commit 64ff2357b1727213803591813dbc779c924bf772
2472 Date: Mon Oct 29 13:02:54 2007 +0100
2474 AVR32: Add support for the ATSTK1004 board
2476 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
2477 which is a derivative of AT32AP7000.
2481 commit 667568db157f374b85abd7e03596ddd1f0b25681
2483 Date: Mon Oct 29 13:02:54 2007 +0100
2485 AVR32: Add support for the ATSTK1003 board
2487 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
2488 which is a derivative of AT32AP7000.
2492 commit 5fee84a794a51ec830548cda485a770efb018b92
2494 Date: Mon Oct 29 13:23:33 2007 +0100
2496 AVR32: Make some AT32AP700x peripherals optional
2498 Add a chip-features file providing definitions of the form
2500 AT32AP700x_CHIP_HAS_<peripheral>
2502 to indicate the availability of the given peripheral on the currently
2507 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
2509 Date: Mon Oct 29 13:09:56 2007 +0100
2511 AVR32: Rename at32ap7000 -> at32ap700x
2513 The SoC-specific code for all the AT32AP700x CPUs is practically
2514 identical; the only difference is that some chips have less features
2515 than others. By doing this rename, we can add support for the AP7000
2516 derivatives simply by making some features conditional.
2520 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
2522 Date: Fri Jun 29 18:22:34 2007 +0200
2524 atmel_mci: Show SR when block read fails
2526 Show controller status as well as card status when an error occurs
2531 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
2533 Date: Thu Dec 13 14:52:53 2007 +0100
2535 ppc4xx: Bring 4xx fdt support up-to-date
2537 This patch update the 4xx fdt support. It enabled fdt booting
2538 on the AMCC Kilauea and Sequoia for now. More can follow later
2543 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
2545 Date: Thu Dec 13 12:56:34 2007 +0100
2547 cfi_flash: Use map_physmem() and unmap_physmem()
2549 Use map_physmem() and unmap_physmem() to convert from physical to
2550 virtual addresses. This gives the arch a chance to provide an uncached
2551 mapping for flash accesses.
2555 commit 4d7d6936eb29af7cca330937808312aa5f61454d
2557 Date: Thu Dec 13 12:56:33 2007 +0100
2559 Introduce map_physmem() and unmap_physmem()
2561 map_physmem() returns a virtual address which can be used to access a
2562 given physical address without involving the cache. unmap_physmem()
2563 should be called when the virtual address returned by map_physmem() is
2566 This patch adds a stub implementation which simply returns the
2567 physical address cast to a uchar * for all architectures except AVR32,
2568 which converts the physical address to an uncached virtual mapping.
2569 unmap_physmem() is a no-op on all architectures, but if any
2570 architecture needs to do such mappings through the TLB, this is the
2571 hook where those TLB entries can be invalidated.
2575 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
2577 Date: Thu Dec 13 12:56:32 2007 +0100
2579 cfi_flash: Introduce read and write accessors
2581 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
2582 them to access the flash memory. This makes it clearer when the flash
2583 is actually being accessed; merely dereferencing a volatile pointer
2584 looks just like any other kind of access.
2588 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
2590 Date: Thu Dec 13 12:56:31 2007 +0100
2592 Implement __raw_{read,write}[bwl] on all architectures
2594 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
2595 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
2600 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
2602 Date: Sat Oct 6 18:55:36 2007 +0200
2604 cfi_flash: Reorder functions and eliminate extra prototypes
2606 Reorder the functions in cfi_flash.c so that each function only uses
2607 functions that have been defined before it. This allows the static
2608 prototype declarations near the top to be eliminated and might allow
2609 gcc to do a better job inlining functions.
2613 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
2615 Date: Thu Dec 13 12:56:29 2007 +0100
2617 cfi_flash: Make some needlessly global functions static
2619 Make functions not declared in any header file static.
2623 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
2625 Date: Thu Dec 13 12:56:28 2007 +0100
2627 cfi_flash: Break long lines
2629 This patch tries to keep all lines in the cfi_flash driver below 80
2630 columns. There are a few lines left which don't fit this requirement
2631 because I couldn't find any trivial way to break them (i.e. it would
2632 take some restructuring, which I intend to do in a later patch.)
2636 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
2638 Date: Tue Dec 11 13:59:57 2007 +0100
2640 CFI: synchronize command offsets with Linux CFI driver
2642 Fixes non-working CFI Flash on the Inka4x0 board.
2646 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
2648 Date: Fri Dec 7 12:17:34 2007 -0600
2650 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
2652 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
2653 (MPC8544DS, MPC8548CDS, MPC8568MDS).
2657 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
2659 Date: Fri Dec 7 12:04:30 2007 -0600
2661 Update Freescale MPC85xx ADS/CDS/MDS board config
2663 * Enabled CONFIG_CMD_ELF
2667 commit d435793229ce29a42797c1edc39f5b34f987f91a
2669 Date: Fri Dec 7 04:59:26 2007 -0600
2671 Handle Asynchronous DDR clock on 85xx
2673 The MPC8572 introduces the concept of an asynchronous DDR clock with
2674 regards to the platform clock.
2676 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
2681 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
2683 Date: Thu Nov 29 10:34:28 2007 -0600
2685 Update Freescale MPC85xx ADS/CDS/MDS board config
2687 * Removed some misc environment setup
2688 * Enabled CONFIG_CMDLINE_EDITING
2692 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
2694 Date: Thu Nov 29 10:47:44 2007 -0600
2696 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
2698 Minor path corrections needed to ensure buildability.
2702 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
2704 Date: Thu Nov 29 10:16:18 2007 -0600
2706 Move the MPC8540 ADS board under board/freescale.
2708 Minor path corrections needed to ensure buildability.
2712 commit 870ceac5b3a3486c109396e005af81ae762b5710
2714 Date: Thu Nov 29 10:14:50 2007 -0600
2716 Move the MPC8560 ADS board under board/freescale.
2718 Minor path corrections needed to ensure buildability.
2722 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
2724 Date: Thu Nov 29 10:13:47 2007 -0600
2726 Move the MPC8568 MDS board under board/freescale.
2728 Minor path corrections needed to ensure buildability.
2732 commit a853d56c59b33415304531443633808736acfc6e
2734 Date: Thu Nov 29 02:18:59 2007 -0600
2736 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
2738 We already had defines for LAWAR_TRGT_IF_* that we should use
2739 rather than creating new ones. Also, added some missing defines for
2744 commit 04db400892da37b76a585e332a0c137954ad2015
2746 Date: Thu Nov 29 02:10:09 2007 -0600
2748 Stop using immap_t on 85xx
2750 In the future the offsets to various blocks may not be in same location.
2751 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
2752 instead of getting it via &immap.
2756 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
2758 Date: Thu Nov 29 01:23:09 2007 -0600
2760 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
2764 commit c480861bf000156e6a3e932c258db59ff2212dd3
2766 Date: Thu Nov 29 01:06:19 2007 -0600
2768 Update MPC8568 MDS to use libfdt
2770 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
2771 ethernet, pci, and serial for the various fixups that are done.
2775 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
2777 Date: Wed Nov 14 15:52:06 2007 -0500
2779 Add PCI Express support on MPC8568MDS
2784 commit b90d25497625b90ffa3f2911a0895ca237556ff5
2786 Date: Thu Nov 29 00:11:44 2007 -0600
2788 Update MPC85xx CDS to use libfdt
2790 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
2791 ethernet, pci, and serial for the various fixups that are done.
2795 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
2797 Date: Wed Nov 28 22:54:27 2007 -0600
2799 Update MPC8540 ADS to use libfdt
2801 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
2802 ethernet, pci, and serial for the various fixups that are done.
2806 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
2808 Date: Wed Nov 28 22:40:31 2007 -0600
2810 Update MPC8560 ADS to use libfdt
2812 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
2813 ethernet, pci, and serial for the various fixups that are done.
2817 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
2819 Date: Wed Nov 28 00:36:33 2007 -0600
2821 Stop using immap_t for cpm offset on 85xx
2823 In the future the offsets to various blocks may not be in same location.
2824 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
2825 instead of getting it via &immap->im_cpm.
2829 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
2831 Date: Tue Nov 27 23:25:02 2007 -0600
2833 Stop using immap_t for guts offset on 85xx
2835 In the future the offsets to various blocks may not be in same location.
2836 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
2837 instead of getting it via &immap->im_gur.
2841 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
2843 Date: Tue Nov 27 22:42:34 2007 -0600
2845 Update MPC8544 DS config
2847 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
2848 * Removed some misc environment setup
2849 * Moved to using fdtfile & fdtaddr as fdt env var names
2850 * Enabled CONFIG_CMDLINE_EDITING
2854 commit addce57e2e4c49e77ffb2020a84690713bb18b47
2856 Date: Mon Nov 26 17:12:24 2007 -0600
2858 Update MPC8544DS to use libfdt
2860 Updated the MPC8544DS config to use libfdt and assume use of aliases for
2861 ethernet, pci, and serial for the various fixups that are done.
2865 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
2867 Date: Thu Nov 29 00:15:30 2007 -0600
2869 Add libfdt based ft_cpu_setup for mpc85xx
2873 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
2875 Date: Tue Dec 11 13:38:19 2007 +0100
2877 ppc4xx: Correct GPIO offset in gpio_config()
2879 Thanks to Gary Jennejohn for pointing this out.
2883 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
2885 Date: Tue Dec 11 11:46:01 2007 +0100
2887 rtc: Fix merging problem
2891 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
2893 Date: Sat Dec 8 14:47:34 2007 +0100
2895 ppc4xx: 405EX: Correctly enable USB pins
2897 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
2898 function control) registers. This is done for the AMCC Kilauea and
2903 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
2905 Date: Sat Dec 8 08:25:09 2007 +0100
2907 CFI: Coding style cleanup
2911 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
2913 Date: Fri Dec 7 23:35:02 2007 +0100
2915 CFI: support JEDEC flash roms in CFI-flash framework
2917 The following patch adds support for non-CFI flash ROMS, by hooking into the
2918 CFI flash code and using most of its code, as recently discussed here in the
2919 thread "Mixing CFI and non-CFI flashs".
2924 commit c01b17dd856fa120b2970f50d9598546a4927ec3
2926 Date: Wed Nov 28 21:24:50 2007 -0500
2928 Conditionally compile fdt_fixup_ethernet()
2930 Fix compiler warnings: On boards that don't have ethernets defined,
2931 don't compile fdt_fixup_ethernet().
2933 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
2935 Date: Tue Nov 27 21:59:46 2007 -0600
2937 Convert boards that set memory node to use fdt_fixup_memory()
2941 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
2943 Date: Mon Nov 26 17:06:15 2007 -0600
2945 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
2947 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
2948 determine which serial alias we should set linux,stdout-path to.
2952 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
2954 Date: Mon Nov 26 14:57:45 2007 -0600
2956 Add common memory fixup function
2958 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
2962 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
2964 Date: Mon Nov 26 11:19:12 2007 -0600
2966 Conditionally compile fdt_support.c
2968 Modify common/Makefile to conditionally compile fdt_support.c based
2969 on CONFIG_OF_LIBFDT.
2973 commit d88e7ba0980773479e1a64badb293116071b7ef0
2975 Date: Mon Nov 26 10:41:40 2007 -0600
2977 Fix build breakage due to libfdt import
2979 The IDS8247 got lost in the update and need an API update
2980 do to rename of functions in libfdt.
2984 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
2986 Date: Fri Nov 23 19:43:20 2007 -0500
2988 Add spaces around the = in the fdt print format.
2992 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
2994 Date: Fri Dec 7 01:25:38 2007 +0900
2996 sh: Moved driver of the SuperH dependence
2998 The composition of the directory in the drivers/ changed.
2999 I moved SuperH serial driver and marubun PCMCIA driver.
3003 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
3005 Date: Thu Dec 6 10:21:19 2007 +0100
3011 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
3013 Date: Thu Dec 6 10:21:03 2007 +0100
3015 ADS5121 Board: fix compile problem.
3019 commit a27044b14a9e93678a82d7b35f202b93e7687abc
3021 Date: Thu Dec 6 05:58:43 2007 +0100
3023 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
3025 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
3026 setting the FIXD bit in the SDR0_MFR register. Here a description of the
3030 ------------------------------
3031 If a DMA is performed between memory and PCI with the DMA 1 Controller
3032 using prefetch, and as a result uses a special purpose buffer selected by
3033 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
3034 the first part of the transfer sequence is performed twice. The
3035 PPC440SPe PCI Controller requests more data than was needed such that in
3036 the case of enforce memory protection, a host CPU exception can occur.
3037 No data is corrupted, because data transfer is stopped in the PCI
3038 Controller. Prefetch enable is specified by setting DMA Configuration
3039 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
3041 Behavior that may be observed in a running system
3042 ---------------------------------------------------------------------------
3044 1. DMA performance is decreased because of the double access on the PCI bus
3046 2. If an illegal access to some address on the PCI bus is detected at the
3047 system level, a machine check or similar system error may occur.
3049 Workarounds Available
3050 ----------------------------------
3052 1. Do not program prefetch. Note that a prefetch command cannot be programmed
3053 without selecting a special purpose buffer.
3054 2. To avoid crossing a physical boundary of the PCI slave device, add 512
3055 bytes of address to the PCI address range.
3058 from AMCC and slighly changed.
3063 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
3065 Date: Tue Dec 4 16:29:48 2007 +0100
3067 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
3071 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
3073 Date: Mon Dec 3 00:15:28 2007 +0100
3075 Prepare for 1.3.1-rc1
3079 commit e15e33433e7c05111968dc9b434a52fd42cbd221
3081 Date: Fri Nov 30 07:15:41 2007 +0100
3083 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
3085 This manual PCIe reset triggering solves the problem seen with the
3086 Intel EPRO/1000 card, which was not detected (link not established)
3087 upon power-up reset.
3091 commit 260eea5676ca46903a335686cc020b29c4ca46fe
3093 Date: Thu Nov 29 01:21:54 2007 +0900
3095 sh: Add SuperH boards maintainer to MAINTAINERS file
3097 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
3101 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
3103 Date: Thu Nov 29 00:13:04 2007 +0900
3105 sh: Add ms7750se support in MAKEALL
3109 commit c7144373427a178332bf9754131c8c34c52c200a
3111 Date: Tue Nov 27 09:44:53 2007 +0100
3113 sh: Add sh3 and sh4 support in MAKEALL
3118 commit 130080874a3d28450098481a262c5f7c855e908d
3120 Date: Sun Nov 25 02:51:17 2007 +0900
3122 sh: Add document for SuperH.
3124 This document is a summary of information concerning SuperH of U-Boot.
3128 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
3130 Date: Sun Nov 25 02:39:31 2007 +0900
3132 sh: Add marubun's pcmcia driver
3134 Marubun pcmcia is a chip for PCMCIA used with SuperH.
3135 Of course, this can be used even by other architectures.
3136 When use this driver, came to be able to use CompactFlash
3141 commit febd86b969b975289ed948f1ac0eb9722da41ced
3143 Date: Sun Nov 25 02:32:13 2007 +0900
3145 sh: Update SuperH SCIF driver
3147 - Changed volatile unsigned to vu_.
3148 - Changed Makefile for kconfig.
3152 commit 8be760903645af09871be50ad0a6f9ebb62b311d
3154 Date: Tue Nov 27 11:57:35 2007 +0100
3156 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
3158 After an error in the AMCC 405EX users manual now correctly configure
3159 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
3164 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
3166 Date: Mon Nov 26 19:18:21 2007 +0100
3168 Cleanup coding style; update CHANGELOG
3172 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
3174 Date: Sun Nov 25 22:39:25 2007 +0100
3176 MAKEALL: add missing 512x boards in ppc
3180 commit a340c325e668ca7386c2276387681720be9c3757
3182 Date: Sun Nov 25 18:45:47 2007 +0100
3184 Makefile : fix tags ctags etags with new drivers organization
3188 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
3190 Date: Mon Nov 26 15:06:14 2007 +0100
3192 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
3194 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
3199 commit ca1ce226287270bb01e25b8e3674c701f12edf19
3201 Date: Mon Nov 26 15:01:45 2007 +0100
3203 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
3207 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
3209 Date: Sun Nov 25 18:45:47 2007 +0100
3211 Makefile : fix tags ctags etags with new drivers organization
3215 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
3217 Date: Sat Nov 24 21:26:56 2007 +0100
3219 drivers/mtd : move mtd drivers to drivers/mtd
3223 commit 318c0b90431f2648552e5ade78833f42652ce859
3225 Date: Sat Nov 24 21:17:55 2007 +0100
3227 drivers/misc : move misc drivers to drivers/misc
3231 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
3233 Date: Sat Nov 24 21:13:59 2007 +0100
3235 drivers/block : move block drivers to drivers/block
3239 commit 0c698dcaa70275eb8814f665b545547cee013892
3241 Date: Sat Nov 24 20:59:50 2007 +0100
3243 drivers/rtc : move rtc drivers to drivers/rtc
3247 commit f868cc5a50757d94f36c312395481cb0f187d9e6
3249 Date: Sat Nov 24 20:14:44 2007 +0100
3251 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
3255 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
3257 Date: Sat Nov 24 19:46:45 2007 +0100
3259 drivers/input : move input drivers to drivers/input
3263 commit e4558666293364fc3af1c1d9381ca933fa0f1275
3265 Date: Sat Nov 24 19:40:11 2007 +0100
3267 drivers/usb : move usb drivers to drivers/usb
3271 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
3273 Date: Sat Nov 24 19:33:38 2007 +0100
3275 drivers/serial : move serial drivers to drivers/serial
3279 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
3281 Date: Wed Nov 21 21:19:24 2007 +0100
3283 drivers/net : move net drivers to drivers/net
3287 commit 352d259130b349fe9593b8dada641bd78a9659e5
3289 Date: Tue Nov 20 20:41:48 2007 +0100
3291 drivers/video : move video drivers to drivers/video
3295 commit 73646217186aa17afc8e305c5f06f06dd335eaad
3297 Date: Tue Nov 20 20:33:09 2007 +0100
3299 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
3303 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
3305 Date: Tue Nov 20 20:28:09 2007 +0100
3307 drivers/pci : move pci drivers to drivers/pci
3311 commit 9162352817579840d7802da6d85872b3ca003c97
3313 Date: Thu Nov 22 17:23:23 2007 -0500
3315 Fix fdt printing for updated libfdt
3317 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
3321 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
3323 Date: Wed Nov 21 13:30:15 2007 -0600
3325 Add additional fdt fixup helper functions
3327 Added the following fdt fixup helpers:
3328 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
3329 * do_fixup_by_compat{_u32} - Find matching nodes by compat
3331 The _u32 variants work the same only the property they are setting
3332 is know to be a 32-bit integer instead of a byte buffer.
3336 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
3338 Date: Wed Nov 21 11:11:03 2007 -0600
3340 Add fdt_fixup_ethernet helper to set mac addresses
3342 Added a fixup helper that uses aliases to set mac addresses
3343 in the device tree based on the bd_t
3347 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
3349 Date: Wed Nov 21 14:07:46 2007 -0600
3351 Fix warnings from import of libfdt
3353 cmd_fdt.c: In function fdt_print:
3354 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
3355 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
3356 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
3357 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
3361 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
3363 Date: Wed Oct 24 11:04:22 2007 -0500
3365 Update libfdt from device tree compiler (dtc)
3367 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
3368 the device tree compiler (dtc) project.
3372 commit e93becf80d732b64aef81b23e8b6ece02c40533d
3374 Date: Sat Nov 3 19:46:28 2007 -0500
3376 Move do_fixup* for libfdt into common code
3378 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
3379 into common/fdt_support.c and renamed:
3381 do_fixup() -> do_fixup_by_path()
3382 do_fixup_u32() -> do_fixup_by_path_u32()
3386 commit f738b4a75998f42a7408defadc9baac7a31c92db
3388 Date: Thu Oct 25 16:15:07 2007 -0500
3390 Make no options to fdt print default to '/'
3394 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
3396 Date: Wed Oct 24 10:21:57 2007 -0500
3398 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
3401 fdt_node_is_compatible
3402 fdt_find_node_by_type
3403 fdt_find_compatible_node
3405 To ease merge of newer libfdt as we aren't using them anywhere at this time.
3407 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
3412 commit 98e2867cc85409b919f862e6c16026461ec955df
3414 Date: Wed Nov 21 09:19:37 2007 -0700
3416 [BUILD] Remove libraries when updating autoconf.mk
3418 Fix library problems caused by conditional compilation. Using
3419 autoconf.mk to decide which files to compile has caused a problem when
3420 changing configuration from one board to another without clearing out
3421 the library (*.a) files.
3423 It used to be that the linker was always passed the same list of .o
3424 files when building the .a files. However, that is not longer true
3425 with conditional compilation. Now, a different board config will have
3426 a different file list passed to the linker. The problem occurs when
3427 a library has already been built and the board config is changed.
3429 Since the linker will update instead of replace a preexisting library,
3430 then if the file list changes to remove some object files the old
3431 objects will still exist in the library.
3433 The solution is to remove all old library files when autoconf.mk is
3438 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
3440 Date: Wed Nov 21 08:49:50 2007 -0600
3442 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
3444 Modify libfdt/Makefile to conditionally compile the *.c files based
3445 on the board config.
3449 commit 4a43719a7738712811d822ca8125427b27a55cdc
3451 Date: Mon Sep 24 09:05:31 2007 -0600
3453 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
3455 Modify common/Makefile to conditionally compile the cmd_*.c files based
3456 on the board config.
3460 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
3462 Date: Mon Sep 24 09:05:31 2007 -0600
3464 [BUILD] Generate include/autoconf.mk from board config files
3466 Use cpp and sed to postprocess config.h and import the defined values
3467 into include/autoconf.mk. autoconf.mk is then included by config.mk to
3468 give 'make' access to the board configuration.
3470 Doing this enables conditional compilation at the Makefile level instead
3471 of by wrapping every .c file with #ifdef/#endif wrappers.
3475 commit 68b88999da87ab88e71e1306192905be3450198e
3477 Date: Tue Nov 20 15:02:26 2007 -0600
3479 8610HPCD: Enable the 8610 Display Interface Unit
3483 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
3485 Date: Tue Nov 20 15:00:53 2007 -0600
3487 Move 8610 DIU interface structure definitions to header file.
3489 These two structures are still needed during the
3490 initialization and setup of the DIU hardware.
3491 So move them to the fsl_diu_fb.h file for now.
3497 commit 080c646dbf474a109c3f85718fb01ce042a38c45
3499 Date: Tue Nov 20 20:14:18 2007 +0100
3501 drivers/i2c : move i2c drivers to drivers/i2c
3505 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
3507 Date: Mon Nov 19 22:20:24 2007 +0100
3509 Prepare for 1.3.0 release.
3513 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
3515 Date: Mon Nov 19 10:02:13 2007 -0500
3517 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
3519 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
3523 commit f8c320609366176b31104d9bf5e295232e1c7f1d
3525 Date: Mon Nov 19 11:14:16 2007 +0900
3527 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
3529 lowlevel_init.S: Assembler messages:
3530 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
3532 Looking at codes, the `memtest' and `clearmem' are intentional mixed
3533 use of `global symbols' and `label' for debugging purpose. To make it
3534 build, just disable global-symbols-use for now. As a result `memtest'
3535 still remains as unused, but leave it be...
3539 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
3541 Date: Mon Nov 19 12:59:14 2007 +0100
3543 Fix build problems with mp2usb board
3547 commit 6bf4c686afca1e86e1c384d59218f914605713bf
3549 Date: Sun Nov 18 18:36:11 2007 +0100
3551 s3c24x0: Fix usb_ohci.c missing in Makefile
3552 and usb_ohci.c warning differ in signedness
3556 commit 6073f61e078da5ddb521b56256bcc36508589883
3558 Date: Sun Nov 18 12:55:02 2007 +0100
3560 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
3564 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
3566 Date: Sun Nov 18 17:11:09 2007 +0100
3568 Fix compiler warnings for ARM systems.
3572 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
3574 Date: Sun Nov 18 16:36:27 2007 +0100
3576 Fix compiler warnings for PPC systems. Update CHANGELOG.
3580 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
3582 Date: Sun Nov 18 14:44:44 2007 +0100
3584 ppc4xx: Correct 405EX PCIe UTL register mapping
3586 Map 4k mem space for UTL registers for each port.
3590 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
3592 Date: Sat Nov 17 11:31:10 2007 +0100
3594 Fix warning differ in signedness in net/net.c and net/nfs.c
3596 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
3598 Date: Sat Nov 17 20:42:45 2007 +0900
3600 gth2.c: Fix a warning on gth2 build.
3602 gth2.c: In function 'misc_init_r':
3603 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
3607 commit 2309c130aa4c84b91bd874a41269c923eb61b555
3609 Date: Sat Nov 17 07:58:25 2007 +0100
3611 Fix warning differ in signedness in common/cmd_scsi.c
3615 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
3617 Date: Sat Nov 17 14:52:29 2007 +0100
3619 ppc4xx: Update AMCC Kilauea config file
3621 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
3625 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
3627 Date: Sat Nov 17 20:05:26 2007 +0900
3629 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
3631 Current trick to pick up GNU assembler minor version does not work with the
3632 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
3635 $ sde-as --version |grep "GNU assembler"
3636 GNU assembler 2.15.94 mipssde-6.02.02-20050602
3637 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
3639 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
3643 $ mips-linux-as --version |grep "GNU assembler"
3644 GNU assembler (GNU Binutils) 2.18
3645 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
3647 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
3651 As a result of above, you'll see many noises with such binutils:
3654 /bin/sh: line 0: [: : integer expression expected
3655 /bin/sh: line 0: [: : integer expression expected
3656 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
3657 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
3658 /bin/sh: line 0: [: : integer expression expected
3659 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
3660 /bin/sh: line 0: [: : integer expression expected
3661 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
3662 /bin/sh: line 0: [: : integer expression expected
3664 This patch simplifies the trick and makes it work with both versions of gas.
3665 I also replace an expensive `awk (or gawk)' with `cut'.
3669 commit 16664f72850846e645616da1c0fa5afcd6d15f15
3671 Date: Sat Nov 17 20:05:26 2007 +0900
3673 [MIPS] Remove useless instructions for initializing $gp.
3677 commit 03c031d5660ea946c39af6e2e16267da857c609f
3679 Date: Sat Oct 27 15:27:06 2007 +0900
3681 [MIPS] MIPS 4K core: Coding style cleanups
3687 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
3689 Date: Sat Nov 17 20:05:20 2007 +0900
3691 [MIPS] gth2.c: Fix a warning on gth2 build.
3693 gth2.c: In function 'misc_init_r':
3694 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
3698 commit 4fbd0741b2b6441da10be93e10267122581b7079
3700 Date: Sat Oct 27 15:22:33 2007 +0900
3702 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
3704 au1x00_eth.c: In function 'au1x00_miiphy_write':
3705 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
3709 commit f01320459736f156707425cf8112f98606301aa4
3711 Date: Sat Oct 27 15:00:25 2007 +0900
3713 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
3715 au1x00_eth.c: In function 'au1x00_enet_initialize':
3716 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
3717 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
3718 au1x00_eth.c:246: error: for each function it appears in.)
3719 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
3720 au1x00_eth.c: In function 'au1x00_miiphy_write':
3721 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
3722 make[1]: *** [au1x00_eth.o] Error 1
3724 Fixed by moving these two functions forward.
3728 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
3730 Date: Sat Oct 27 15:00:25 2007 +0900
3732 MAKEALL: Added missing pb1000 board
3736 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
3738 Date: Sat Oct 27 15:00:24 2007 +0900
3740 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
3744 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
3746 Date: Sat Oct 27 15:00:24 2007 +0900
3748 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
3752 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
3754 Date: Sat Nov 17 02:34:38 2007 +0100
3756 Update CHANGELOIG, prepare for -rc4
3760 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
3762 Date: Wed Nov 14 18:58:33 2007 +0100
3764 Fix the i2c frequency and default address in rsdproto board
3766 rsdproto board support has wrong I2C frequency and wrong return value
3771 commit 429c180edad038f91c989cb14b478228092e7054
3773 Date: Sat Nov 17 01:45:38 2007 +0100
3775 powerpc: Backout relocation changes for MPC5121, too.
3777 Apply Grant Likely's backout to MPC5121 code, too.
3783 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
3785 Date: Tue Nov 13 22:18:33 2007 -0700
3787 powerpc: Backout relocation changes.
3789 Ugh. I *hate* to back this change out, but these compiler flags don't
3790 work for relocation on all versions of GCC. I've not been able to
3791 reproduce the environment in my setup (and hence, not been able to
3792 find a combination that *does* work), so I've got no choice but to go
3793 back to the old gcc flags and linker script.
3797 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
3799 Date: Tue Nov 13 09:11:05 2007 +0100
3801 Fixed mips_io_port_base build errors.
3803 This patch has been sent on:
3806 Although mips_io_port_base is currently a part of IDE command, it is quite
3807 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
3808 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
3810 This patch is triggered by multiple definition of `mips_io_port_base' build
3811 error on gth2 (and tb0229 also needs this fix.)
3813 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
3814 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
3815 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
3816 make: *** [u-boot] Error 1
3821 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
3823 Date: Sat Nov 17 01:30:40 2007 +0100
3825 Fix a bug in the slave serial programming mode for the Xilinx
3826 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
3827 the most significant bit was set, which did not work on any
3828 architecture where "char" defaulted to be an unsigned type.
3834 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
3836 Date: Thu Nov 1 12:23:29 2007 -0500
3838 86xx: Fix broken variable reference when #def DEBUGing.
3840 Sometimes you can't reference the DDR2 controller variables.
3844 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
3846 Date: Fri Oct 26 18:32:00 2007 +0800
3848 make 8610 board use pixis reset
3852 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
3854 Date: Mon Oct 29 19:26:21 2007 +0800
3856 Unify pixis_reset altbank across board families
3858 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
3859 into the separate board config files.
3864 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
3866 Date: Wed Nov 7 08:19:21 2007 +0100
3868 Fix warning: pointer targets in assignment differ in signedness
3872 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
3874 Date: Wed Nov 7 08:19:19 2007 +0100
3876 Fix warning differ in signedness in common/cmd_ide.c
3880 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
3882 Date: Fri Nov 16 14:16:54 2007 +0100
3884 ppc4xx: Enable 405EX PCIe UTL register configuration
3886 Till now the UTL registers on 405EX were not initialized but left with
3887 their default values. This patch new initializes some of the UTL
3892 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
3894 Date: Fri Nov 16 14:00:59 2007 +0100
3896 ppc4xx: Update AMCC Makalu for board rev 1.1
3898 This patch adds changes needed for Makalu rev 1.1:
3900 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
3901 - Enable 2nd ethernet port EMAC1
3902 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
3903 - Reset PCIe ports via GPIO upon bootup
3907 commit 4d4faae65e115e327425cd514c1a35146a85166b
3909 Date: Mon Sep 24 09:05:31 2007 -0600
3911 Group PCI and PCMCIA drivers in drivers/Makefile
3915 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
3917 Date: Mon Sep 24 09:05:31 2007 -0600
3919 Group block/flash drivers in drivers/Makefile
3923 commit df58c81551700f058b44cacf55a7997fa63bfe0a
3925 Date: Mon Sep 24 09:05:31 2007 -0600
3927 Group USB drivers in drivers/Makefile
3931 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
3933 Date: Mon Sep 24 09:05:30 2007 -0600
3935 Group i2c drivers in drivers/Makefile
3939 commit ec00c76de0e5971273905998d62d6bb119324218
3941 Date: Mon Sep 24 09:05:30 2007 -0600
3943 Group console drivers in drivers/Makefile
3947 commit 754f230aa01b8c789fc31f8013c2487954073300
3949 Date: Mon Sep 24 09:05:30 2007 -0600
3951 Group network drivers in drivers/Makefile
3955 commit f0037c56b0d12cd46215124667b9f83d60ef9391
3957 Date: Mon Sep 24 09:05:30 2007 -0600
3959 Build: split COBJS value into multiple lines
3961 This change is in preparation for condtitionial compile support in the
3962 build system. By spliting them all into seperate lines now, subsequent
3963 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
3964 be less invasive and easier to review
3968 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
3970 Date: Mon Sep 24 09:05:30 2007 -0600
3972 Add .gitignore files
3977 commit 955413f35f054a82e40042f1dbcf501c6a05719b
3979 Date: Thu Nov 15 08:27:52 2007 -0700
3981 Revert "Correct relocation fixup for mpc5xx"
3983 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
3986 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
3988 Date: Thu Nov 15 08:24:32 2007 -0700
3990 Revert "Correct fixup relocation for MPC5xxx"
3992 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
3995 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
3997 Date: Thu Nov 15 08:21:04 2007 -0700
3999 Revert "Correct fixup relocation for mpc8220"
4001 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
4004 commit 70922342369e5e39b286fe21e768a239ca07a514
4006 Date: Thu Nov 15 08:20:57 2007 -0700
4008 Revert "Correct fixup relocation for mpc824x"
4010 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
4013 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
4015 Date: Thu Nov 15 08:20:50 2007 -0700
4017 Revert "Correct fixup relocation for mpc8260"
4019 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
4022 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
4024 Date: Thu Nov 15 08:20:43 2007 -0700
4026 Revert "Correct fixup relocation for mpc83xx"
4028 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
4031 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
4033 Date: Thu Nov 15 08:20:25 2007 -0700
4035 Revert "[MPC512x] Correct fixup relocation"
4037 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
4040 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
4042 Date: Thu Nov 15 14:25:09 2007 +0100
4044 ppc4xx: Small AMCC Kilauea cleanup
4046 Remove not needed pci_target_init() function.
4050 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
4052 Date: Thu Nov 15 14:23:55 2007 +0100
4054 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
4056 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
4057 - Cleanup of the 4xx GPIO functions
4058 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
4062 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
4064 Date: Thu Nov 15 14:20:08 2007 +0100
4066 ppc4xx: AMCC Taihu board config file cleanup
4068 This patch makes the AMCC Taihu a little more compatible to the other
4073 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
4075 Date: Thu Nov 15 13:37:28 2007 +0100
4077 [INKA4x0] NG hardware: flash support
4079 Disabled and remove inka4x0 custom flash driver, use CFI flash
4084 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
4086 Date: Thu Nov 15 13:29:55 2007 +0100
4088 [INKA4x0] NG hardware: SDRAM support
4090 Add support for three new DDR chips that may be present on a NG
4091 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
4093 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
4097 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
4099 Date: Thu Nov 15 13:24:43 2007 +0100
4101 [INKA4x0] NG hardware: platform code update
4103 - Cleanup compile warnings.
4104 - Add missing '\0' in default environment.
4105 - Increase CFG_MONITOR_LEN to 256 KiB.
4106 - Add required CFG_USE_PPCENV.
4110 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
4112 Date: Thu Nov 15 08:58:00 2007 +0000
4114 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
4115 Remove warnings re onenand_read() & write()
4117 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
4119 Date: Thu Nov 15 08:45:13 2007 +0000
4123 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
4125 Date: Thu Sep 13 18:52:28 2007 +0800
4127 Enable ULi1575 Ethernet support in 8610HPCD config
4132 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
4134 Date: Tue Nov 13 08:18:20 2007 +0100
4136 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
4140 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
4142 Date: Tue Nov 13 08:06:11 2007 +0100
4144 ppc4xx: Fix 405EX PCIe UTLSET register setup
4148 commit 1ce55151c85d068f70317a8d65c61058b891afb4
4150 Date: Tue Nov 13 07:50:29 2007 +0100
4152 [UC101] SRAM now with 2 MB working.
4156 commit 2d14684341109a69616e4d6016cd61402d55086f
4158 Date: Fri Nov 9 15:37:53 2007 +0100
4160 ppc4xx: Use generic usb-ohci driver for sequoia board
4162 This patch makes the sequoia board use the generic usb-ohci driver
4163 instead of cpu/ppc4xx/usb_ohci.c.
4168 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
4170 Date: Fri Nov 9 15:37:23 2007 +0100
4172 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
4174 This patch disables the 44x d-cache on 'usb start' and
4175 reenables it on 'usb stop'. This should be seen as a
4176 temporary fix until the generic usb-ohci driver can
4177 life with d-cache enabled.
4182 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
4184 Date: Fri Nov 9 15:36:44 2007 +0100
4186 ppc4xx: Remove redundant code from 4xx network driver
4188 This patch removes some redundant code and decrements the end
4189 address of cache flush and invalidate by 1.
4194 commit 5ca9881aad8c413ac2a82868a5e3719178254502
4196 Date: Fri Nov 9 15:24:26 2007 +0000
4198 Add apollon board support
4201 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
4203 Date: Fri Nov 9 12:19:58 2007 +0100
4205 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
4209 commit c7f69c340277935a6c19a956421852da944a365f
4211 Date: Fri Nov 9 12:18:54 2007 +0100
4213 ppc4xx: Make output a little shorter on I2C bootrom detection
4215 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
4216 already print a line with the information which I2C bootrom is
4217 used for bootstrap configuration. So we don't need this extra line
4218 with "I2C boot EEPROM en-/dis-abled".
4220 This patch also has a little code cleanup integrated.
4224 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
4226 Date: Thu Nov 8 12:50:18 2007 -0600
4228 ColdFire: MCF5329 - Remove reset registers from CCM
4232 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
4234 Date: Thu Nov 8 12:31:11 2007 -0600
4236 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
4240 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
4242 Date: Thu Nov 8 12:19:01 2007 -0600
4244 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
4248 commit 225a24b5e062ad94627424508ae814f51dbe1a34
4250 Date: Wed Nov 7 18:00:54 2007 -0600
4252 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
4256 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
4258 Date: Wed Nov 7 17:56:15 2007 -0600
4260 ColdFire: MCF532x - Update do_reset() using core reset
4264 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
4266 Date: Wed Nov 7 17:51:00 2007 -0600
4268 ColdFire: Update cpu flag for 4.2-xx compiler
4272 commit 070ba56115b4da63b46e974287fa4550d4023386
4274 Date: Wed Oct 31 14:59:04 2007 -0500
4276 8610: Add console frame buffer support to FSL 8610 DIU driver.
4278 Add cfb console support to FSL 8610 DIU driver.
4279 Inspect board version from PIXIS to obtain correct pixel format.
4281 Use #define CONFIG_VIDEO in config file to enable fb console.
4283 To switch monitor, set monitor variable to
4284 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
4285 followed by "diufb init".
4287 Preserve logo bitmap at the top of the fb console.
4292 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
4294 Date: Mon Oct 29 13:58:39 2007 -0500
4296 8610: Add 8610 DIU display driver
4298 1280x1024 and 1024x768 @ 32 bpp are supported now.
4299 DVI, Single-link LVDS, Double-link LVDS are all supported.
4301 Environmental variable "monitor" is used to specify monitor port.
4303 A new command "diufb" is introduced to reinitialize monitor
4304 and display a BMP file in the memory. So far, 1-bit, 4-bit,
4305 8-bit and 24-bit BMP formats are supported.
4308 - initialize the diu driver
4309 Enable the port specified in the environmental variable "monitor"
4312 - display bmp file in memory.
4313 The bmp image should be no bigger than the resolution, 1280x1024
4314 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
4316 Note, this driver allocate memory but doesn't free it after use
4317 It is written on purpose -- to avoid a failure of reallocation
4318 due to memory fragement.
4320 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
4325 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
4327 Date: Wed Oct 31 10:43:59 2007 -0500
4329 FSL: Add a freescale bitmap logo.
4331 This Freescale logo is a 340 x 128 x 4bpp BMP file
4332 that can be displayed by the DIU Framebuffer driver.
4337 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
4339 Date: Mon Oct 29 13:57:53 2007 -0500
4341 8610: Make some extra debug environment variables conditional.
4343 One may #define ENV_DEBUG to get them back again.
4347 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
4349 Date: Mon Oct 29 19:26:21 2007 +0800
4351 8610: Actually enable pixis_reset CONFIGs
4355 commit f3bceaab230b4748d0afc4109b6837308f018b40
4357 Date: Fri Oct 26 18:31:59 2007 +0800
4359 Fix the BAT definition of PCI IO on 8610 board
4361 The address in the BAT register is aligned with the BAT size.
4362 The original definition actually did not define BAT for PCIE2 IO.
4363 This patch fix this.
4367 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
4369 Date: Mon Oct 29 19:26:21 2007 +0800
4371 Unify pixis_reset altbank across board families
4373 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
4374 into the separate board config files.
4379 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
4381 Date: Fri Oct 26 18:32:00 2007 +0800
4383 make 8610 board use pixis reset
4387 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
4389 Date: Thu Nov 1 12:23:29 2007 -0500
4391 86xx: Fix broken variable reference when #def DEBUGing.
4393 Sometimes you can't reference the DDR2 controller variables.
4397 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
4399 Date: Mon Nov 5 17:39:24 2007 +0800
4401 Implement general ULi 526x Ethernet driver support in U-boot
4403 This patch implements general ULi 526x Ethernet driver.
4404 Until now, it is the only native Ethernet port on
4405 MPC8610HPCD board, but it could be used on other boards
4406 with ULi 526x Ethernet port as well.
4413 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
4415 Date: Thu Nov 1 08:46:50 2007 -0500
4417 NET: Add Ethernet 1000BASE-X support for PPC4xx
4419 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
4420 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
4421 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
4422 "mii info" command is modified to distinguish between 1000BASE-T and -X.
4427 commit 298035df4948b113d29ac0e694717d34b95bc5dc
4429 Date: Wed Oct 31 11:21:29 2007 -0500
4431 NET: Cosmetic changes
4436 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
4438 Date: Mon Nov 5 07:43:05 2007 +0100
4440 ppc4xx: Make output a little shorter on PCIe detection
4442 Now not max 3 lines but 2 lines are printed per PCIe port.
4446 commit 992742a5b09d9040adbd156fb90756af66ade310
4448 Date: Sat Nov 3 23:09:27 2007 +0100
4450 Cleanup coding style; update CHANGELOG
4454 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
4456 Date: Fri Nov 2 13:15:42 2007 -0700
4458 fix wording in README
4460 Changed the wording to properly describe the shadowing
4461 of the environment from ROM to RAM
4465 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
4467 Date: Wed Oct 31 02:18:15 2007 +0900
4469 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
4473 commit ec22755799466c8a103664bb3a5e647bf9c238f4
4475 Date: Thu Oct 25 16:08:14 2007 +0300
4477 Trimmed some variables in ne2000.c
4481 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
4483 Date: Thu Oct 25 17:51:27 2007 +0800
4485 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
4487 The scan code of the key 'z' is 0x1d, which should be handled.
4489 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
4494 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
4496 Date: Thu Oct 25 17:30:04 2007 +0800
4498 Fix USB support issue for MPC8641HPCN board.
4500 The configuration file has already enabled USB, but it
4501 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
4502 on MPC8641HPCN can not work because of the wrong USB
4505 And add the USB command to U-Boot commands list.
4509 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
4511 Date: Wed Oct 24 18:16:01 2007 +0200
4513 Use config_cmd_default.h instead of config_cmd_all.h
4517 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
4519 Date: Wed Oct 24 01:37:36 2007 +0200
4521 TQM5200: Call usb_cpu_init() during board init
4523 usb_cpu_init() configures GPS USB pins, clocks, etc. and
4524 is required for proper operation of kernel USB subsystem.
4525 This setup was previously done in the kernel by the fixup
4526 code which is being removed, thus low level init must be
4531 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
4533 Date: Tue Oct 23 16:25:50 2007 +0200
4537 An obvious typo. Originally fixed in linkstation u-boot port.
4541 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
4543 Date: Tue Oct 23 14:35:05 2007 +0200
4545 Fix a typo in cpu/mpc824x/interrupts.c
4547 Since December 2003 the timer_interrupt_cpu() function in
4548 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
4549 parameter. Remove it.
4553 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
4555 Date: Wed Oct 17 11:13:51 2007 +0200
4557 add ft_cpu_setup(..) on mpc8260
4559 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
4560 based on code from mpc5xxx
4565 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
4567 Date: Wed Oct 17 11:18:42 2007 +0200
4569 changes for IDS8247 board support
4571 To get the IDS8247 board working following are done:
4572 - FCC2 is deactivated
4575 - CFI driver is activated
4576 - Adapted for use with LIBFDT
4581 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
4583 Date: Sat Nov 3 12:08:28 2007 +0100
4585 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
4587 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
4588 Again, only one image supports both targets.
4592 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
4594 Date: Wed Oct 24 15:48:37 2007 +0200
4596 ATSTK1002: Remove default ethernet addresses
4598 Wolfgang is right: It's not a good idea to set up default initial
4599 ethernet addresses for a board, even though they belong to the local
4602 This will change the failure mode from "IT manager screams at you for
4603 using duplicate ethernet addresses" to a nice error message explaining
4604 that the ethernet address hasn't been set properly.
4608 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
4610 Date: Mon Oct 29 17:40:35 2007 -0400
4614 This is a multi-part message in MIME format.
4616 commit e6e505eae94ed721e123e177489291fc4544b7b8
4618 Date: Mon Oct 29 17:19:03 2007 -0400
4620 Found a bug in the way the DHCP Request packet is built, where the IP address
4621 that is offered by the server is bound to prematurely. This patch is a fix of
4622 that bug where the IP address offered by the DHCP server is not used until
4623 after the DHCP ACK from the server is received.
4628 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
4630 Date: Wed Oct 31 20:58:34 2007 +0100
4632 ppc4xx: Fix acadia_nand build problem
4634 Since the cache handling functions were moved from start.S into cache.S
4635 the acadia NAND booting Makfile needs to be adapted accordingly.
4639 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
4641 Date: Wed Oct 31 20:57:11 2007 +0100
4643 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
4645 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
4646 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
4647 boards by defining CONFIG_4xx_DCACHE in the board config file. This
4648 option will disappear, when more boards use is successfully and no
4649 more known problems exist.
4651 This is tested successfully on Sequoia and Katmai. The only problem that
4652 needs to be fixed is, that USB is not working on Sequoia right now, since
4653 it will need some cache handling code too, similar to the 4xx EMAC driver.
4657 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
4659 Date: Wed Oct 31 20:51:10 2007 +0100
4661 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
4663 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
4664 disable the cache for the CPU POST tests, since these tests consist
4665 of self modifying code. This is done via the new change_tlb() function.
4669 commit f71b2888b4b3c870909a0341427b2a914246f81f
4671 Date: Wed Oct 31 20:47:26 2007 +0100
4673 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
4675 This patch enables the 4xx EMAC POST driver to work too, when dcache is
4680 commit a2685904061b35a17583d65fe47cdc2686a69eaa
4682 Date: Wed Oct 31 20:45:53 2007 +0100
4684 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
4688 commit ff768cb168d8157c24a25016dbfbeb465e47f420
4690 Date: Wed Oct 31 18:01:24 2007 +0100
4692 ppc4xx: Change 4xx ethernet driver to handle cached memory too
4694 This patch enables the 4xx EMAC driver to work too, when dcache is
4699 commit 483e09a223c666269ef81d3573a6591b1046b0ef
4701 Date: Wed Oct 31 17:59:22 2007 +0100
4703 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
4705 This function is used to either turn cache on or off in a specific
4710 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
4712 Date: Wed Oct 31 17:57:52 2007 +0100
4714 ppc4xx: Remove cache definition from 4xx board config files
4716 All 4xx board config files don't need the cache definitions anymore.
4717 These are now defined in common headers.
4721 commit 9b94ac61d2176185c30adf0793e079ec30e68687
4723 Date: Wed Oct 31 17:55:58 2007 +0100
4725 ppc4xx: Rework 4xx cache support
4727 New cache handling functions added and all existing functions
4728 moved from start.S into seperate cache.S.
4732 commit 06713773da4ac3d390c63d82641eb553224b27c2
4734 Date: Tue Oct 23 18:03:12 2007 +0200
4736 ppc4xx: Remove compiler warning from previous commit
4740 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
4742 Date: Tue Oct 23 14:40:30 2007 +0200
4744 ppc4xx: Remove temporary TLB entry in POST cache test
4748 commit 1338e6a81834099ba19733b69aafd8ef5f098094
4750 Date: Tue Oct 23 14:05:08 2007 +0200
4752 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
4754 I lately noticed, that newer 4xx board with GBit support sometimes don't
4755 finish link autonegotiation in 4 seconds. Changing this timeout to 5
4756 seconds seems fine here.
4760 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
4762 Date: Tue Oct 23 14:03:17 2007 +0200
4764 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
4766 This patch changes all in32/out32 calls to use the recommended in_be32/
4767 out_be32 macros instead.
4771 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
4773 Date: Thu Oct 25 12:24:59 2007 +0200
4775 ppc4xx: Fix POST ethernet test for Haleakala
4777 The POST ethernet test needed to be changed to dynamically determine
4778 the count of ethernet devices. This code is cloned from the 4xx
4783 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
4785 Date: Tue Oct 23 11:31:05 2007 +0200
4787 ppc4xx: Correct UART input clock calculation and passing to fdt
4789 We now use a value in the gd (global data) structure for the UART input
4790 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
4795 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
4797 Date: Tue Oct 23 10:10:08 2007 +0200
4799 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
4801 The Haleakala is nearly identical with the Kilauea eval board. The only
4802 difference is that the 405EXr only supports one EMAC and one PCIe
4803 interface. This patch adds support for the Haleakala board by using
4804 the identical image for Kilauea and Haleakala. The distinction is done
4805 by comparing the PVR.
4809 commit 9f798766aa85e62eb8fa8c721e148df609b78137
4811 Date: Tue Oct 23 08:29:10 2007 +0200
4813 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
4815 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
4819 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
4820 modules are still plugged in. So it is recommended to remove the DIMM
4821 modules while using the NAND booting code with the fixed SDRAM setup!
4826 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
4828 Date: Mon Oct 22 16:24:44 2007 +0200
4830 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
4834 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
4836 Date: Mon Oct 22 16:22:40 2007 +0200
4838 ppc4xx: Rework of 4xx serial driver (4)
4842 - Use in_8/out_8 macros instead of in8/out8
4843 - No need for UART_BASE marco anymore, now really handled via function
4845 - serial_init_common() introduced
4846 - Further coding style cleanup
4850 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
4852 Date: Mon Oct 22 15:45:49 2007 +0200
4854 ppc4xx: Rework of 4xx serial driver (3)
4856 Change all linker scripts to reference the changed driver name iop480_uart.o.
4860 commit 882ae41274921f9016131806bdeb27e19606f47a
4862 Date: Mon Oct 22 15:44:39 2007 +0200
4864 ppc4xx: Rework of 4xx serial driver (2)
4866 Change all linker scripts to reference the changed driver name 4xx_uart.o.
4868 Note: In most cased all these explicit referencing of these object files
4869 in the linker scripts is not neccessary. Only for manually embedded
4870 environment into the U-Boot image, which is not done is most cases.
4874 commit ad31e40bed042cb670d0036fea96435007afb838
4876 Date: Mon Oct 22 15:09:59 2007 +0200
4878 ppc4xx: Rework of 4xx serial driver (1)
4880 This patch starts the rework of the PPC4xx serial driver. First we split
4881 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
4882 handling code and the other one iop480_uart.c with the UART code for the
4883 PLX-Tech IOP480 PPC (PPC403 based).
4887 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
4889 Date: Mon Oct 22 10:30:38 2007 +0200
4891 ppc4xx: Correct UART input clock calculation and passing to fdt
4895 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
4897 Date: Mon Oct 22 07:34:34 2007 +0200
4899 ppc4xx: Add initial AMCC Makalu 405EX support
4903 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
4905 Date: Mon Oct 22 07:33:52 2007 +0200
4907 ppc4xx: Add freqUART to CPU speed detection
4909 This value is needed later for the device tree configuration of
4914 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
4916 Date: Sun Oct 21 14:26:29 2007 +0200
4918 ppc: Small Kilauea cleanup of config file
4922 commit 758c037aeead34b49631b8da3a90b1bba14c0410
4924 Date: Sun Oct 21 08:16:12 2007 +0200
4926 rtc: Add Xicor/Intersil X1205 RTC support
4928 This patch adds support for the Xicor/Intersil X1205 RTC used on the
4929 AMCC Makalu eval board. This driver is basically cloned from the Linux
4930 driver version (2.6.23).
4932 This patch also introduces the Linux bcd.h header for the BCD2BIN/
4933 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
4934 should be converted to also use this header instead of implementing
4935 their own local copy of these functions/macros.
4939 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
4941 Date: Sun Oct 21 08:12:41 2007 +0200
4943 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
4945 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
4946 PPC440_SYS_INFO structure into the common ppc4xx.h header.
4948 Lot's of other macros are good candidates to be consolidated this way
4953 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
4955 Date: Sun Oct 21 08:05:18 2007 +0200
4957 ppc4xx: Fix size setup in Kilauea DDR2 init routine
4959 The size was initilized wrong. Instead of 256MB, the DDR2 controller
4960 was setup to 512MB. Now the correct values is used.
4962 This patch also does a little cleanup and adds a comment here.
4966 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
4968 Date: Thu Oct 18 17:29:04 2007 +0200
4970 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
4972 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
4973 number is used to access system registers.
4978 commit c36c68160333ac5fe41ec3db12a728b7075b3912
4980 Date: Thu Oct 18 07:42:27 2007 +0200
4982 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
4984 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
4985 is the internal SRAM. Since I now ported and tested this endpoint mode
4986 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
4989 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
4994 commit 5cb4af4791f61843432155142b6cfac901f66c10
4996 Date: Thu Oct 18 07:39:38 2007 +0200
4998 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
5000 This patch adds endpoint support for the AMCC Kilauea eval board. It can
5001 be tested by connecting a reworked PCIe cable (only 1x lane singles
5002 connected) to another root-complex.
5004 In this test setup, a 64MB inbound window is configured at BAR0 which maps
5005 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
5006 access the first 64MB of the SDRAM on the PPC side.
5010 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
5012 Date: Sat Oct 13 16:43:23 2007 +0200
5014 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
5016 This patch adds support for dynamic configuration of PCIe ports for the
5017 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
5018 boards Yucca & Katmai and the 405EX board Kilauea.
5020 This dynamic configuration is done via the "pcie_mode" environement
5021 variable. This variable can be set to "EP" or "RP" for endpoint or
5022 rootpoint mode. Multiple values can be joined via the ":" delimiter.
5027 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
5030 Per default Yucca will be configured as:
5033 Per default Katmai will be configured as:
5036 Per default Kilauea will be configured as:
5042 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
5044 Date: Thu Oct 11 11:15:59 2007 +0200
5046 ppc4xx: Enable device tree support (fdt) on Kilauea per default
5048 This patch enables the fdt support on the AMCC Kilauea eval board.
5049 Additionally now EBC ranges fdt fixup is included to support NOR
5050 FLASH mapping via the Linux physmap_of driver.
5052 This Kilauea port now support booting arch/ppc and arch/powerpc
5053 Linux kernels. The default environment "net_nfs" is for arch/ppc
5054 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
5055 support will be removed.
5059 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
5061 Date: Thu Oct 11 11:11:45 2007 +0200
5063 ppc4xx: Add additional debug info to 4xx fdt support
5067 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
5069 Date: Fri Oct 5 21:28:58 2007 +0200
5071 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
5075 commit 1941cce71b1ae975602854045061e82f94ecd012
5077 Date: Fri Oct 5 17:35:10 2007 +0200
5079 ppc4xx: Fix small merge problem in 4xx_enet.c
5083 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
5085 Date: Fri Oct 5 17:11:30 2007 +0200
5087 ppc4xx: Add initial AMCC Kilauea 405EX support
5091 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
5093 Date: Fri Oct 5 17:10:59 2007 +0200
5095 ppc4xx: Add PPC405EX support
5099 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
5101 Date: Fri Oct 5 17:09:36 2007 +0200
5103 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
5107 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
5109 Date: Fri Oct 5 17:07:50 2007 +0200
5111 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
5115 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
5117 Date: Fri Oct 5 17:04:57 2007 +0200
5119 POST: Add 405EX support to 4xx UART POST test
5123 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
5125 Date: Fri Oct 5 15:10:02 2007 +0200
5127 DTT: Prepare DS1775 driver for use of different I2C addresses
5131 commit 19e93b1e16d267220440d827b920fbad8abfa70f
5133 Date: Fri Oct 5 14:23:43 2007 +0200
5135 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
5139 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
5141 Date: Fri Oct 5 09:22:33 2007 +0200
5143 ppc4xx: 4xx_pcie: Disable debug output as default
5147 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
5149 Date: Fri Oct 5 09:18:23 2007 +0200
5151 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
5155 commit 4dbee8a90df613eb517aadbecebd70f168913d30
5157 Date: Fri Oct 5 07:57:20 2007 +0200
5159 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
5161 128MB seems to be the smallest possible value for the memory size
5162 for on PCIe port. With this change now the BAR's of the PCIe cards
5163 are accessible under U-Boot.
5165 One big note: This only works for PCIe port 0 & 1. For port 2 this
5166 currently doesn't work, since the base address is now 0xc0000000
5167 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
5168 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
5169 to change the base addresses completely and this change would have
5170 too much impact right now.
5172 This patch adds debug output to the 4xx pcie driver too.
5176 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
5178 Date: Wed Oct 3 21:16:32 2007 +0200
5180 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
5184 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
5186 Date: Wed Oct 3 15:01:02 2007 +0200
5188 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
5190 These files were introduced with the IBM 405GP but are currently used on all
5191 4xx PPC platforms. So the name doesn't match the content anymore. This patch
5192 renames the files to 4xx_pci.c/h.
5196 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
5198 Date: Wed Oct 3 14:14:58 2007 +0200
5200 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
5204 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
5206 Date: Wed Oct 3 10:38:09 2007 +0200
5208 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
5210 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
5211 the SDR registers of the PCIe ports. This makes the overall design
5212 clearer, since it removed a lot of switch statements which are not
5215 Also, the functions ppc4xx_init_pcie_rootport() and
5216 ppc4xx_init_pcie_entport() are merged into a single function
5217 ppc4xx_init_pcie_port(), since most of the code was duplicated.
5218 This makes maintainance and porting to other 4xx platforms
5223 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
5225 Date: Wed Oct 3 07:48:09 2007 +0200
5227 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
5229 This patch is the first patch of a series to make the 440SPe PCIe code
5230 usable on different 4xx PPC platforms. In preperation for the new 405EX
5231 which is also equipped with PCIe interfaces.
5233 (2) This patch renames the functions from 440spe_ to 4xx_ with a
5234 little additional cleanup
5238 commit c7c6da23028f146d912514b95aefa3da7cf37699
5240 Date: Wed Oct 3 07:34:10 2007 +0200
5242 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
5244 This patch is the first patch of a series to make the 440SPe PCIe code
5245 usable on different 4xx PPC platforms. In preperation for the new 405EX
5246 which is also equipped with PCIe interfaces.
5248 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
5252 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
5254 Date: Wed Oct 24 01:37:36 2007 +0200
5256 TQM5200: Call usb_cpu_init() during board init
5258 usb_cpu_init() configures GPS USB pins, clocks, etc. and
5259 is required for proper operation of kernel USB subsystem.
5260 This setup was previously done in the kernel by the fixup
5261 code which is being removed, thus low level init must be
5267 commit b5af773f8d92677e06f3295b45557c9d0a487c24
5269 Date: Thu Oct 25 17:51:27 2007 +0800
5271 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
5273 The scan code of the key 'z' is 0x1d, which should be handled.
5275 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
5281 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
5283 Date: Mon Oct 15 11:59:17 2007 +0200
5285 PXA USB OHCI: "usb stop" implementation.
5287 Some USB keys need to be switched off before loading the kernel
5288 otherwise they can remain in an undefined status which prevents them
5289 to be correctly recognized by the kernel.
5294 commit 31548249decf18a6b877a18436b6139dd483fe4a
5296 Date: Mon Oct 29 17:40:35 2007 -0400
5300 This is a multi-part message in MIME format.
5302 commit e6e505eae94ed721e123e177489291fc4544b7b8
5304 Date: Mon Oct 29 17:19:03 2007 -0400
5306 Found a bug in the way the DHCP Request packet is built, where the IP address
5307 that is offered by the server is bound to prematurely. This patch is a fix of
5308 that bug where the IP address offered by the DHCP server is not used until
5309 after the DHCP ACK from the server is received.
5314 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
5316 Date: Thu Oct 25 17:16:22 2007 -0500
5318 ColdFire 54455: Fix correct boot location for atmel and intel
5322 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
5324 Date: Thu Oct 25 17:14:00 2007 -0500
5326 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
5330 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
5332 Date: Thu Oct 25 17:12:36 2007 -0500
5334 ColdFire 5329: Assign correct SDRAM size and fix cache
5338 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
5340 Date: Thu Oct 25 17:10:23 2007 -0500
5342 ColdFire 5253: Assign correct SDRAM size
5346 commit 2acefa72ee0026f862ab65597ca687428f63a973
5348 Date: Thu Oct 25 17:09:17 2007 -0500
5350 ColdFire 5282: Fix external flash boot and return dramsize
5354 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
5356 Date: Thu Oct 25 17:20:01 2007 +0200
5358 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
5362 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
5364 Date: Wed Oct 24 08:42:25 2007 +0200
5366 TQM5200: fix spurious characters on second serial interface
5368 With this patch PSC3 is configured as UART. This is done, because if
5369 the pins of PSC3 are not configured at all (-> all pins are GPI),
5370 due to crosstalk, spurious characters may be send over the RX232_2_TXD
5376 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
5378 Date: Wed Oct 24 08:41:27 2007 +0200
5380 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
5382 Some commands for the STK52xx base board try to access the SM501 grafic
5383 controller. But the TQM5200S has no grafic controller (only the TQM5200
5384 and the TQM5200B have). This patch deactivates the commands accessing
5385 the SM501 for the TQM5200S.
5390 commit b31f64343ead9482cd439b1adbe4c34026a641b1
5392 Date: Mon Oct 22 16:45:53 2007 +0200
5394 TQM5200: fix spurious characters on second serial interface
5396 With this patch PSC3 is configured as UART. This is done, because if
5397 the pins of PSC3 are not configured at all (-> all pins are GPI),
5398 due to crosstalk, spurious characters may be send over the RX232_2_TXD
5403 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
5405 Date: Mon Oct 22 16:40:06 2007 +0200
5407 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
5409 Some commands for the STK52xx base board try to access the SM501 grafic
5410 controller. But the TQM5200S has no grafic controller (only the TQM5200
5411 and the TQM5200B have). This patch deactivates the commands accessing
5412 the SM501 for the TQM5200S.
5416 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
5418 Date: Sun Oct 21 09:14:28 2007 +0200
5420 Mips: Fix string functions differ prototype declaration
5424 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
5426 Date: Fri Oct 19 17:51:40 2007 -0500
5428 fsl_pci_init enable COMMAND_MEMORY if inbound window
5430 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
5431 to pciauto_setup_device has the side effect of not getting
5436 commit e9d0d527992566ebef9826962ff1745b2f082b92
5438 Date: Fri Oct 19 10:55:24 2007 +0200
5440 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
5444 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
5446 Date: Fri Oct 19 08:10:15 2007 +0200
5448 fix warning: no return statement in function returning non-void
5452 commit e78220f6e514206757acfe247297fc9a328a881f
5454 Date: Fri Oct 19 06:33:45 2007 +0200
5456 xsengine: Fix no partition type specified, use DOS as default
5460 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
5462 Date: Fri Oct 19 00:24:59 2007 +0200
5464 lubbock: Fix no partition type specified, use DOS as default
5468 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
5470 Date: Tue Oct 23 16:50:03 2007 +0200
5472 Coding style: keep lists sorted; update CHANGELOG
5476 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
5478 Date: Fri Oct 19 00:09:05 2007 +0200
5480 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
5484 commit 96455bfebc9887837095c9051d216f53c61b5f10
5486 Date: Fri Oct 19 00:07:39 2007 +0200
5488 Fix warning differ in signedness in board/innokom/innokom.c
5492 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
5494 Date: Fri Oct 19 00:25:33 2007 +0200
5496 fix pxa255_idp board
5498 The pxa255_idp being an old unmaintained board showed several issues:
5499 1. CONFIG_INIT_CRITICAL was still defined.
5500 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
5501 3. Symbol flash_addr was undeclared.
5502 4. The boards lowlevel_init function was still called memsetup.
5503 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
5504 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
5505 'target CPU does not support interworking' warnings on recent compilers.
5506 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
5507 indexes rather than the register definitions from the pxa-regs header
5508 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
5509 avoid any ambiguities.
5510 8. There were several redefinition warnings concerning ICMR, OSMR3,
5511 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
5512 9. The board configuration file was rather outdated.
5513 10. The part header file defined the vendor, product and revision arrays
5514 as unsigned chars instead of just chars in the block_dev_desc_t
5519 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
5521 Date: Wed Oct 17 11:56:31 2007 -0500
5523 Make MPC8266ADS command selection more robust
5525 Fix MPC8266 command line definition so it won't break when new commands
5526 are added to u-boot.
5529 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
5531 Date: Tue Oct 23 13:14:10 2007 +0200
5533 Motion-PRO: Update configuration to accomodate next generation board.
5535 New board has faster oscillator and a different Flash chip. This affects:
5538 - Flash CS configuration (timings)
5539 - Flash sector size, and thus MTD partition layout
5540 - malloc() arena size (due to bigger Flash sectors)
5541 - smaller memory test range (due to bigger malloc() arena)
5543 This patch also enables more extensive memory testing via "mtest".
5547 commit eff501904df2bf1724a750062628ba2c51dbb1f8
5549 Date: Tue Oct 23 11:36:07 2007 +0200
5551 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
5553 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
5554 register must be written a value of 0x00000004 as the first step of the
5555 SDRAM contorller configuration.
5559 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
5561 Date: Tue Oct 23 10:22:16 2007 +0100
5563 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
5565 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
5567 Date: Tue Oct 23 10:17:42 2007 +0200
5569 ppc4xx: lwmon5: Some further GPIO config changes
5573 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
5575 Date: Sun Oct 21 22:10:10 2007 +0900
5577 [MIPS] Fix UNCACHED_SDRAM
5579 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
5584 commit 00101dd7a32d12f698150123e47e4b3420279f86
5586 Date: Sun Oct 21 21:30:42 2007 +0900
5588 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
5592 commit eb700636db017d310edaeb559b13d82588560674
5594 Date: Sun Oct 21 10:55:37 2007 +0900
5596 [MIPS] u-boot.lds: Define _gp in a standard manner
5600 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
5602 Date: Sun Oct 21 10:55:36 2007 +0900
5604 [MIPS] Fix $gp usage
5606 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
5607 As a general principle, we should use _gp for $gp.
5609 Thanks to linker script's help we fortunately have _gp which equals to
5610 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
5611 be able to access to GOT entires, global variables and procedure entry
5612 points. The right thing to do is to use _gp.
5614 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
5615 which holds the offset from _gp. When updating GOT entries, we use this
5616 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
5619 I made some change to leave over num_got_entries.
5624 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
5626 Date: Sun Oct 21 10:55:36 2007 +0900
5628 [MIPS] u-boot.lds: Fix __got_start and __got_end
5630 Ensure that __got_start points to top of the `.got', and __got_end points
5631 to bottom as well, so that we never fail to count num_got_entries.
5635 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
5637 Date: Sun Oct 21 10:55:36 2007 +0900
5639 [MIPS] u-boot.lds: Remove duplicated .sdata section
5643 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
5645 Date: Sun Oct 21 01:01:17 2007 +0200
5647 Minor coding style cleanup; update CHANGELOG
5651 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
5653 Date: Thu Oct 4 20:47:10 2007 +0300
5657 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
5658 to do anything in eth_stop() if eth_init() was not called.
5659 Simplified RX path in order to avoid timeouts on really really
5660 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
5661 clever enough to cope with 1 packet per eth_rx().
5665 commit df90968b48fb34fa9072fab150db2ac89678f537
5667 Date: Mon Sep 24 13:32:13 2007 -0400
5669 Setting MSR[DE] in do_reset
5672 This patch ensures the soft reset of the board for the 85xx boards
5673 by setting the MSR[DE] in the do_reset function.
5677 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
5679 Date: Mon Sep 24 13:36:01 2007 -0400
5684 This patch fixes the MSR overwrite in the start.S when moving out of
5689 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
5691 Date: Fri Oct 19 11:33:48 2007 -0500
5693 tsec driver should clear RHALT on startup
5695 This was causing problems for some people.
5701 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
5703 Date: Thu Oct 11 00:29:18 2007 -0500
5705 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
5707 On the MPC85xx CDS we have two issues:
5709 1. The device tree fixup code did not check to see if the property we are
5710 trying to update is actually found. Its possible that it would update
5711 random memory starting at 0.
5713 2. Newer Linux kernel's have moved the location of the PCI nodes to be
5714 sibilings of the soc node and not children. The explicit PATH to the PCI
5715 node would not be found for these device trees. Add the ability to handle
5716 both paths. In the future we shouldn't handle such fixups by explicit path.
5720 commit a3063eec775719b7e91023bbec3f64b3118791df
5722 Date: Thu Oct 11 00:18:48 2007 -0500
5724 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
5726 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
5727 console. Make it so we match that config what we tell Linux as the early
5732 commit e1ce3cb617bb06f91f82f98915391175addf3e82
5734 Date: Tue Oct 2 11:12:27 2007 -0500
5736 Remove magic numbers from cache related operations for mpc85xx
5738 The mpc85xx start code uses some magic numbers that we actually
5739 have #defines for in <config.h> so use those instead.
5743 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
5745 Date: Fri Oct 19 16:47:26 2007 +0200
5751 commit 281df457c1aa50d2752165d0c5c3282d4027b974
5753 Date: Thu Oct 18 17:47:19 2007 +0800
5755 mpc83xx: Add configure entry for MPC83xx ATM support
5757 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
5763 commit d2646554f529a9577515eceb0ec5eceee18244ba
5765 Date: Thu Oct 18 17:44:38 2007 +0800
5767 mpc83xx: pq-mds-pib.c typo error
5769 Correct to val8 from val.
5774 commit 3e11ae80fec1ee12194940955431186abf6009c2
5776 Date: Wed Oct 17 15:40:19 2007 +0200
5778 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
5782 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
5784 Date: Tue Oct 16 15:27:43 2007 -0500
5786 Initial mpc8610hpcd Makefile files.
5793 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
5795 Date: Tue Oct 16 15:26:51 2007 -0500
5797 Initial mpc8610hpcd cpu/, README and include/ files.
5804 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
5806 Date: Tue Oct 16 13:54:01 2007 -0500
5808 Initial mpc8610hpcd board files.
5815 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
5817 Date: Tue Oct 16 14:50:40 2007 -0500
5819 Make MPC8266ADS board compile again.
5823 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
5825 Date: Mon Aug 27 12:41:03 2007 -0500
5827 86xx: Allow for fewer DDR slots per memory controller.
5829 As a direct correlation exists between DDR DIMM slots
5830 and SPD EEPROM addresses used to configure them, use
5831 the individually defined SPD_EEPROM_ADDRESS* values to
5832 determine if a DDR DIMM slot should have its SPD
5833 configuration read or not.
5835 Effectively, this now allows for 1 or 2 DIMM slots
5836 per memory controller.
5840 commit 4d4a945e189a2f384c66432316da2788a0ac1607
5842 Date: Mon Oct 15 11:59:17 2007 +0200
5844 PXA USB OHCI: "usb stop" implementation.
5846 Some USB keys need to be switched off before loading the kernel
5847 otherwise they can remain in an undefined status which prevents them
5848 to be correctly recognized by the kernel.
5852 commit e2e93442e558cf1500e92861f99713b2f045ea22
5854 Date: Mon Oct 15 11:39:00 2007 +0200
5856 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
5858 The I2C bootstrap values that can be setup via the "bootstrap" command,
5859 were setup incorrect regarding the generation of the internal sync PCI
5860 clock. The values for PLB clock == 133MHz were slighly incorrect and the
5861 values for PLB clock == 166MHz were totally incorrect. This could
5862 lead to a hangup upon booting while PCI configuration scan.
5864 This patch fixes this issue and configures valid PCI divisor values
5865 for the sync PCI clock, with respect to the provided external async
5868 Here the values of the formula in the chapter 14.2 "PCI clocking"
5869 from the 440EPx users manual:
5871 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
5873 33MHz async PCI frequency:
5875 => 32 <= 44.3 <= 65 (div = 3)
5878 => 32 <= 55.3 <= 65 (div = 3)
5880 66MHz async PCI frequency:
5882 => 65 <= 66.5 <= 132 (div = 2)
5885 => 65 <= 83 <= 132 (div = 2)
5889 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
5891 Date: Mon Oct 15 11:29:33 2007 +0200
5893 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
5895 The BCSR status bit for the 66MHz PCI operation was correctly
5896 addressed (MSB/LSB problem). Now the correct currently setup
5897 PCI frequency is displayed upon bootup.
5899 This patch also fixes this problem on Rainier & Yellowstone, since these
5900 boards use the same souce code as Sequoia & Yosemite do.
5904 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
5906 Date: Wed Sep 26 17:55:56 2007 +0200
5908 TQM860M: adjust for doubled flash sector size.
5910 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
5911 doubled sector size.
5915 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
5917 Date: Wed Sep 26 17:55:54 2007 +0200
5919 TQM8xx: Fix CAN timing.
5923 commit d43e489baf02afae49077791fb22332d240d8656
5925 Date: Thu Sep 27 14:54:36 2007 +0200
5927 TQM866M: fix SDRAM refresh
5929 At 133 MHz the current SDRAM refresh rate is too fast
5930 (measured 4 * 1.17 us).
5931 CFG_MAMR_PTA changes from 39 to 97. This result
5932 in a refresh rate of 4 * 7.8 us at the default clock
5933 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
5934 This is a compromise until a new method is found to
5935 adjust the refresh rate.
5939 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
5941 Date: Wed Sep 26 17:55:55 2007 +0200
5943 TQM866M: adjust for doubled flash sector size.
5945 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
5946 doubled sector size.
5950 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
5952 Date: Sun Oct 14 16:12:29 2007 +0200
5954 [FIX] XUPV2P change command handling
5955 and remove code violation
5957 commit 636400198228d96983c06657b17f760f5989958e
5959 Date: Sun Oct 14 00:13:19 2007 +0200
5961 Prepare for 1.3.0-rc3 release
5965 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
5967 Date: Sat Sep 29 13:41:37 2007 +0200
5969 Fix warning differ in signedness in cpu/pxa/mmc.c
5973 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
5975 Date: Sat Oct 13 23:51:14 2007 +0200
5977 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
5982 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
5984 Date: Sat Oct 13 21:15:39 2007 +0200
5986 Coding Style cleanup.
5990 commit e1893815b0999410d7a327589611c7b38e95299e
5992 Date: Fri Oct 12 15:49:39 2007 +0200
5998 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
6000 Date: Tue Oct 9 13:58:24 2007 +0200
6002 [ads5121] EEPROM support added.
6006 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
6008 Date: Sat Oct 6 18:55:35 2007 +0200
6010 AVR32: Initialize bi_flash* in board_init_r
6012 The ATSTK1000-specific flash driver intializes bi_flashstart,
6013 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
6016 Initialize these in board_init_r instead so that things will still be
6017 set up correctly when we switch to the CFI driver.
6021 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
6023 Date: Fri Oct 5 10:40:54 2007 +0200
6025 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
6029 commit 92869195ef8210758d2176230c0a36897afd50ed
6031 Date: Fri Oct 5 09:46:06 2007 +0200
6033 CM5200: Fix missing null-termination in hostname manipulation code
6037 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
6039 Date: Tue Oct 2 19:09:01 2007 +0200
6041 Fix memtest breakage
6043 CFG_MEMTEST_START uses weird magic involving gd, which fails to
6044 compile. Use hardcoded values instead (we actually know how much RAM
6049 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
6051 Date: Tue Oct 2 11:44:46 2007 +0200
6053 ppc4xx: Coding style cleanup
6057 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
6059 Date: Tue Oct 2 11:44:19 2007 +0200
6061 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
6065 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
6067 Date: Mon Oct 1 09:51:50 2007 +0200
6069 Program EPLD to force full duplex mode for PHY.
6071 EPLD forces modes of PHY operation. By default full duplex is turned off.
6072 This fix turns it on.
6076 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
6078 Date: Mon Sep 24 14:50:32 2007 +0300
6080 Bugfix: Use only one PTD for one endpoint
6082 Original isp116x-hcd code prepared multiple PTDs for longer than 16
6083 byte transfers for one endpoint. That is unnecessary because the
6084 ISP116x is able to split long data from one PTD into multiple
6085 transactions based on the buffer size of the endpoint. It also caused
6086 serious problems if the endpoint NAKed some of the transactions. In
6087 that case ISP116x wouldn't notice that the other PTDs were for the same
6088 endpoint and would try the other PTDs possibly out of order. That would
6089 break the whole transfer.
6091 This patch makes isp116x_submit_job to use one PTD for one transfer.
6096 commit 86ec86c04326c3913178a7679aa910de071da75d
6098 Date: Thu Sep 27 23:27:47 2007 +0200
6100 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
6104 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
6106 Date: Tue Sep 11 14:12:55 2007 +0200
6108 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
6112 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
6114 Date: Wed Sep 26 16:35:54 2007 -0500
6116 85xx io out functions need sync after write.
6118 This fixes the mc146818 rtc_read/write functions for 85xx.
6122 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
6124 Date: Tue Sep 25 15:48:05 2007 -0600
6126 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
6128 CFG_FPGA_XILINX is a bit value used to test against the value in
6129 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
6130 think that is the intention in this code.
6134 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
6136 Date: Mon Sep 24 00:41:30 2007 +0200
6138 [FIX] change command handling and removing code violation
6140 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
6142 Date: Mon Sep 24 00:36:06 2007 +0200
6144 [FIX] change sets of commands
6145 because changing of command handling brings
6146 compilation problems
6148 commit cb1bc63b75a232571eb69aa2c8aa919321655845
6150 Date: Mon Sep 24 00:30:42 2007 +0200
6152 [FIX] Email reparation & Copyright
6153 Both codes are written by myself without any
6156 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
6158 Date: Mon Sep 24 00:25:11 2007 +0200
6160 [PATCH] Change macro name for UartLite
6161 because PowerPC 405 can use UartLite as console
6163 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
6165 Date: Mon Sep 24 00:21:19 2007 +0200
6167 [PATCH] Add support for design without interrupt controller
6170 commit 0731933ec8ec45d02ba89b52df673d526873cdde
6172 Date: Mon Sep 24 00:19:48 2007 +0200
6174 [FIX] resolve problem with cpu without barrel shifter
6176 commit db14d77995ce515b728b178b63f82babe60e3d56
6178 Date: Mon Sep 24 00:18:46 2007 +0200
6180 [FIX] repair email address
6182 commit 481d4328618804add1f818a6c96296121cd0528e
6184 Date: Mon Sep 24 00:17:42 2007 +0200
6186 [FIX] repair MFSL commands
6188 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
6190 Date: Mon Sep 24 00:08:37 2007 +0200
6192 synchronizition with mainline
6194 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
6196 Date: Sun Sep 23 02:42:38 2007 +0900
6198 sh: Add support command of ide with sh
6202 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
6204 Date: Sun Sep 23 02:38:42 2007 +0900
6208 Add support MS7722SE01 to Makefile.
6212 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
6214 Date: Sun Sep 23 02:31:13 2007 +0900
6216 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
6220 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
6222 Date: Sun Sep 23 02:19:24 2007 +0900
6224 sh: Update MS7750SE01 platform
6228 commit 516ad760db3553766267ada01b7d5d727faa4bbd
6230 Date: Sun Sep 23 02:17:08 2007 +0900
6232 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
6236 commit b02bad128669e567fce87d8df823b06a0144b8db
6238 Date: Sun Sep 23 02:12:30 2007 +0900
6240 sh: Update core code of SuperH.
6244 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
6246 Date: Thu Sep 20 00:04:14 2007 +0200
6252 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
6254 Date: Tue Sep 18 21:36:35 2007 +0200
6256 Avoid compiler warning.
6260 commit 8a783a65851bc7421ab69f442261215e21b8891a
6262 Date: Tue Sep 18 12:24:57 2007 -0600
6264 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
6266 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
6267 nulls in a string differently. For example, the following statement:
6268 echo "this is a string\0" > afile
6269 Will produce the following with /bin/bash:
6270 "this is a string\0"
6271 But with /bin/dash, will produce:
6274 Bug fixed by moving the embedded null out of the makefile and into the
6275 config header. Also renamed the macro to avoid usage colision with the same
6276 macro used by other board ports.
6280 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
6282 Date: Tue Sep 18 17:40:27 2007 +0200
6284 MCC200: fix build warning
6286 The MCC200 board config file includes version.h for some customer-
6287 specific setting, which causes warnings with "make depend"; build
6288 version.h before depend.
6292 commit bd86220f58b99d6896198c385fda132f0c980915
6294 Date: Tue Sep 18 13:07:54 2007 +0100
6296 Move coloured led API to status_led.h
6297 Improve indentation in drivers/at45.c
6299 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
6301 Date: Tue Sep 18 08:47:20 2007 +0200
6303 Update atstk1002 bootargs.
6305 Updates to atstk1002 U-Boot header file:
6307 * Set the bootargs for at1002 to point to the SD-card partition instead
6308 * ... of the boot flash.
6309 * Removing the rootfstype since that argument are not needed.
6314 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
6316 Date: Wed Sep 12 13:32:37 2007 +0200
6318 Add some comments to clocks in atstk1002.h
6320 This patch applies some clarifying comments to how the different
6321 clocks are setup according to atstk1002.h Some of the previous
6322 comments where stating wrongful information.
6326 commit 97213f32416ead885deafea86774e912ffd60ad0
6328 Date: Mon Sep 17 17:04:47 2007 +0200
6330 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
6334 commit 30363e98fa470fbecea5e8bc0f1443352754f303
6336 Date: Mon Sep 17 08:20:47 2007 +0200
6338 Small whitespace cleanup of OneNAND patch
6342 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
6344 Date: Mon Sep 10 17:15:14 2007 +0900
6346 OneNAND support (take #2)
6348 [PATCH 3/3] OneNAND support (take #2)
6350 OneNAND support at U-Boot
6354 commit 17aa2800457df0c06b41516f46f126712c196219
6356 Date: Mon Sep 10 17:14:34 2007 +0900
6358 OneNAND support (take #2)
6360 [PATCH 2/3] OneNAND support (take #2)
6362 OneNAND support at U-Boot
6366 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
6368 Date: Mon Sep 10 17:13:49 2007 +0900
6370 OneNAND support (take #2)
6372 [PATCH 1/3] OneNAND support (take #2)
6374 OneNAND support at U-Boot
6378 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
6380 Date: Sun Sep 16 20:51:57 2007 +0200
6382 [FIX] remove files form repository
6384 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
6386 Date: Sun Sep 16 17:10:04 2007 +0200
6388 TQM8xx[LM]: Fix broken environment alignment.
6390 With recent toolchains, the environment sectors were no longer aligned to
6391 sector boundaries. The reason was a combination of two bugs:
6393 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
6394 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
6395 this gets defined, is not included here (and cannot be included
6396 without causing lots of problems).
6398 Added a new #define CFG_USE_PPCENV for all boards which really
6399 want to put the environment is a ".ppcenv" section.
6401 2) The linker scripts just include environment.o, silently assuming
6402 that the objects in that file are really in the order in which
6403 they are coded in the C file, i. e. "environment" first, then
6404 "redundand_environment", and "env_size" last. However, current
6405 toolchains (GCC-4.x) reorder the objects, causing the environment
6406 data not to start on a flash sector boundary:
6410 40008000 T environment 40008000 T env_size
6411 4000c000 T redundand_environment 40008004 T redundand_environment
6412 40010000 T env_size 4000c004 T environment
6414 Note: this patch fixes just the first part, and cures the alignment
6415 problem by making sure that "env_size" gets placed correctly. However,
6416 we still have a potential issue because primary and redundant
6417 environment sectors are actually swapped, i. e. we have now:
6419 40008000 T redundand_environment
6420 4000c000 T environment
6423 This shall be fixed in the next version.
6427 commit eb6da8050797c204c9d010548424186c7ce32fc1
6429 Date: Sun Sep 16 02:39:35 2007 +0200
6431 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
6435 commit cd2d1602c54cc6957bdef3872272a4b264893960
6437 Date: Mon Sep 10 14:54:56 2007 -0400
6441 Fixup for the break statement in wrong place.
6447 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
6449 Date: Tue Sep 11 17:04:00 2007 +0200
6451 Fix do_div() usage in nand process output
6453 Fix usage of do_div() in nand erase|read|write process output.
6455 The last patch to nand_util.c introduced do_div() instead of libgcc's
6456 implementation. But do_div() returns the quotient in its first
6457 macro parameter and not as result.
6461 commit c750d2e6692a000a82f29de7bf24e3dc21239161
6463 Date: Wed Sep 12 12:36:53 2007 +0200
6465 NAND: Add CFG_NAND_QUIET option
6467 This config option sets the default for the progress information
6468 output behavior that can also be configured through the 'quiet'
6469 environment variable.
6471 The legacy NAND code does not print the current progress info
6472 on the console. So this option is for backward compatibility for
6473 units that are in the field and where setting the quiet variable
6474 is not an option. With CFG_NAND_QUIET set to '1' the console
6475 progress info is turned off. This can still be overwritten
6476 through the environment variable.
6480 commit dcb88630290d2bcd803386dd4c2be73142994c4f
6482 Date: Thu Sep 13 16:06:05 2007 -0700
6484 ColdFire: fix build error becasue of bad type of mii_init()
6488 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
6490 Date: Thu Sep 13 16:04:05 2007 -0700
6492 ColdFire: Fix build error caused by pixis.c
6494 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
6498 commit e21659e30660a1377c42af135a6114efe39801d9
6500 Date: Fri Sep 14 11:14:42 2007 -0600
6502 Update MPC8349ITX*_config to place config.tmp in right place.
6504 MPC834ITX*_config does not store config.tmp at the correct locatation,
6505 causing MPC8349ITXGP to have the wrong TEXT_BASE.
6510 commit 1218abf1b5817a39a82399b4b928b00750575bda
6512 Date: Sat Sep 15 20:48:41 2007 +0200
6514 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
6518 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
6520 Date: Sat Sep 15 11:55:42 2007 +0200
6522 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
6524 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
6529 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
6531 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
6533 Date: Sat Sep 15 00:03:35 2007 +0200
6535 Synchronize with U-BOOT mainline
6537 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
6539 Date: Fri Sep 14 11:14:42 2007 -0600
6541 Update MPC8349ITX*_config to place config.tmp in right place.
6543 MPC834ITX*_config does not store config.tmp at the correct locatation,
6544 causing MPC8349ITXGP to have the wrong TEXT_BASE.
6550 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
6552 Date: Thu Sep 13 18:21:48 2007 +0200
6554 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
6558 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
6560 Date: Thu Sep 13 16:33:59 2007 +0200
6562 tqm5200: Restore customary env. variable boot commands for powerpc kernels
6564 - update default definitions of kernel_addr and fdt_addr env. variables
6565 - make arch/powerpc booting the default scenario
6566 - update MTD partition layout to match the above
6570 commit f34024d4a328e6edd906456da98d2c537155c4f7
6572 Date: Wed Sep 12 00:48:57 2007 +0200
6574 Fix memory corruption problem on STX GP3 SSA Board.
6578 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
6580 Date: Tue Sep 11 15:35:01 2007 +0100
6584 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
6586 Date: Tue Sep 11 15:42:11 2007 +0200
6588 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
6589 scan on second pci bus.
6593 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
6595 Date: Tue Sep 11 12:57:52 2007 +0200
6597 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
6599 Bamboo has a file sdram.c which needs special treatment when building in
6600 separate directory. It has to be linked to build directory otherwise it is
6605 commit d45963854eff39d575124d859419bb4953ce2c87
6607 Date: Tue Sep 11 00:37:04 2007 +0200
6609 [FIX] Microblaze ML401 - repare FLASH handling
6611 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
6613 Date: Mon Sep 10 16:55:59 2007 +0100
6615 Allocate CPU Architecture Code for STMicroelectronics' ST200.
6618 ---------------------------------------------------
6620 commit 754bac48156f8958d8f6a53a51eda88ab5758929
6622 Date: Mon Sep 10 20:42:31 2007 +0200
6624 Update version to match current state.
6628 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
6630 Date: Mon Sep 10 17:39:08 2007 +0200
6632 [MPC512x] Streamline frame handling in the FEC driver
6634 - convert frame size settings to be derived from a single base
6635 - set frame size to the recommended default value
6639 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
6641 Date: Mon Sep 10 11:34:00 2007 +0900
6643 Remove compiler warning: target CPU does not support interworking
6647 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
6649 Date: Sun Sep 9 21:21:33 2007 +0200
6651 Fix compile error in spc1920 config.
6656 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
6658 Date: Fri Sep 7 09:25:07 2007 -0600
6660 Bugfix: make bootm+libfdt compile on boards with no flash
6664 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
6666 Date: Fri Sep 7 18:35:37 2007 +0200
6668 [PPC440SPe] PCIe environment settings for Katmai and Yucca
6670 - 'pciconfighost' is set by default in order to be able to scan bridges
6671 behind the primary host/PCIe
6673 - 'pciscandelay' env variable is recognized to allow for user-controlled
6674 delay before the PCIe bus enumeration; some peripheral devices require a
6675 significant delay before they can be scanned (e.g. LSI8408E); without the
6676 delay they are not detected
6680 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
6682 Date: Fri Sep 7 18:20:23 2007 +0200
6684 [PPC440SPe] Improve PCIe configuration space access
6686 - correct configuration space mapping
6687 - correct bus numbering
6688 - better access to config space
6690 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
6691 first device on the first bus. We now allow to configure up to 16 buses;
6692 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
6693 peripheral devices farther in hierarchy can be identified.
6697 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
6699 Date: Fri Sep 7 17:46:18 2007 +0200
6701 [PPC440SPe] Convert machine check exceptions handling
6703 Convert using fixup mechanism to suppressing MCK for the duration of config
6704 read/write transaction: while fixups work fine with the case of a precise
6705 exception, we identified a major drawback with this approach when there's
6706 an imprecise case. In this scenario there is the following race condition:
6707 the fixup is (by design) set to catch the instruction following the one
6708 actually causing the exception; if an interrupt (e.g. decrementer) happens
6709 between those two instructions, the ISR code is executed before the fixup
6710 handler the machine check is no longer protected by the fixup handler as it
6711 appears as within the ISR code. In consequence the fixup approach is being
6712 phased out and replaced with explicit suppressing of MCK during a PCIe
6713 config read/write cycle.
6717 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
6719 Date: Fri Sep 7 17:43:36 2007 +0200
6721 Fix typo in MAKEALL script.
6725 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
6727 Date: Fri Sep 7 17:09:21 2007 +0200
6729 [MPC512x] Proper handling of larger frames in the FEC driver
6731 When frame larger than local RX buffer is received, it is split and handled
6732 by two buffer descriptors. Prior to this patch the FEC driver discarded
6733 contents of a buffer descriptor without the 'LAST' bit set, so the first
6734 part of the frame was lost in case of larger frames. This fix allows to
6735 safely combine the two pieces into the whole frame.
6739 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
6741 Date: Fri Sep 7 17:05:36 2007 +0200
6743 [MPC512x] Correct fixup relocation
6747 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
6749 Date: Fri Sep 7 01:21:25 2007 +0200
6751 Update CHANGELOG, minor coding style cleanup.
6753 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
6755 Date: Thu Aug 30 23:01:49 2007 +0200
6757 PXA270: Added support for TrizepsIV board.
6759 This patch add support for the Trizeps IV module (520Mhz).
6763 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
6765 Date: Thu Aug 30 22:57:04 2007 +0200
6767 PXA270: Add support for multiple serial ports.
6769 This patch adds support for multiple serial ports to the PXA target.
6770 FFUART, BTUART and STUART are supported.
6774 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
6776 Date: Thu Aug 30 22:48:47 2007 +0200
6778 PXA270: fix compile issue (invalid lvalue)
6780 Code is broken for PXA270 due to "invalid lvalue in assignment".
6782 This patch fix it in pxa-regs.h
6786 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
6788 Date: Thu Aug 30 18:19:05 2007 +0800
6790 Add BUILD_DIR support for bios emulator.
6794 commit b4d8a55145442f136982634862341a3e02002bda
6796 Date: Fri Aug 31 14:41:51 2007 +0900
6798 [MIPS] Remove inline asm string functions
6800 Stop using inline string functions on MIPS as other ARCHs do so,
6801 since the optimized inline asm versions are not small.
6803 This change is triggered by a following MIPS build error:
6804 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
6805 common/exports.c:32: undefined reference to `strcmp'
6806 make: *** [u-boot] Error 1
6810 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
6812 Date: Fri Aug 31 14:41:45 2007 +0900
6814 [MIPS] Update asm string header
6816 This patches contains several bugfixes and cleanups in the latest upstream:
6818 - Don't include linux/config.h
6819 - Remove buggy inline version of memscan.
6820 - Merge with Linux 2.6.11-rc3.
6821 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
6822 - Goodbye mips64. 31704 lines of code bite the dust.
6823 - Replace extern inline with static inline.
6824 - Fix return value of strncpy.
6825 - Remove a bunch more "$1" clobbers.
6829 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
6831 Date: Tue Sep 4 17:31:22 2007 +0200
6833 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
6835 Fix incorrect blob address calculation in do_bootm_linux() that prevents
6836 booting the kernel from a multi-file image (kernel + initrd + blob).
6838 Also, make minor updates to the U-Boot's output and to the coding style.
6842 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
6844 Date: Fri Aug 31 14:29:04 2007 +0200
6846 Add support for Sil680 IDE controller.
6848 o add drivers/sil680.c to support the Sil680 IDE-controller.
6849 o drivers/Makefile: add sil680.o.
6853 commit e79021223bc339df655e360645a52c457a74b067
6855 Date: Thu Sep 6 09:47:40 2007 -0600
6857 bootm/fdt: Only process the fdt if an fdt address was provided
6859 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
6860 kernels using the board info structure (instead of passing a device tree)
6861 This change allows the old style booting to be used if the fdt argument
6862 was not passed to 'bootm'.
6867 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
6869 Date: Thu Sep 6 09:46:23 2007 -0600
6871 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
6873 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
6875 Tested on: lite5200b
6877 Note: the fixup functions have not been moved to a common place. This
6878 patch is targeted for immediate merging as in solves a build issue, but
6879 the final name/location of the fixups is still subject to debate. I
6880 propose to merge this now, and move the fixups in the next merge window
6881 to be usable by all targets.
6885 commit 41bb76e941929f54a73206fb132f7a4c275543a3
6887 Date: Thu Sep 6 09:46:17 2007 -0600
6889 libfdt: add convenience function fdt_find_and_setprop()
6891 Given the path to a node, fdt_find_and_setprop() allows a property value
6896 commit 80767a6cead9990d9e77e62be947843c2c72f469
6898 Date: Wed Sep 5 16:04:41 2007 +0100
6900 Changed API name to coloured_led.h
6901 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
6902 Tidied other cpu/arm920t/start.S code
6904 commit 56a9270521baaa00e12639a978302a67f61ef060
6906 Date: Thu Aug 30 16:18:18 2007 -0500
6908 Fix ULI RTC support on MPC8544 DS
6910 The RTC on the M1575 ULI chipset requires a dummy read before
6911 we are able to talk to the RTC. We accomplish this by adding a
6912 second memory region to the PHB the ULI is on and read from it.
6914 The second region is added to maintain compatiabilty with Linux's
6915 view of the PCI memory map.
6919 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
6921 Date: Thu Aug 30 01:58:48 2007 -0500
6923 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
6925 pcie is now differentiated from pci. Add 8641 bus-range updates.
6929 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
6931 Date: Tue Sep 4 16:18:38 2007 +0100
6933 Add coloured led interface for ARM boards.
6934 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
6936 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
6938 Date: Tue Sep 4 14:49:28 2007 +0100
6940 Move include/led.h to board/at91rm9200dk
6942 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
6944 Date: Tue Sep 4 14:25:51 2007 +0100
6946 Ran Lindent on drivers/at45.c
6948 commit 557ab89d294f08dd532f21d19861b40093200a33
6950 Date: Tue Sep 4 14:23:50 2007 +0100
6952 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
6954 commit 81b73dec16fd1227369a191e725e10044a9d56b8
6956 Date: Fri Aug 31 15:21:46 2007 +0200
6958 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
6960 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
6961 set to non-zero, because it doesn't support MRM (memory-read-
6962 multiple) correctly. We now added the possibility to configure
6963 this register in the board config file, so that the default value
6964 of 8 can be overridden.
6966 Here the details of this patch:
6968 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
6969 board-specific settings. As an example the sequoia board requires 0.
6971 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
6973 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
6974 CFG_PCI_CACHE_LINE_SIZE to 0.
6979 commit 60174746c668b309378a91488dded898e9553eae
6981 Date: Fri Aug 31 10:01:51 2007 +0200
6983 Fix TFTP OACK code for short packets.
6985 The old code had a loop limit overflow bug which caused a semi-
6986 infinite loop for small packets, because in "i<len-8", "i" was signed,
6987 but "len" was unsigned, and "len-8" became a huge number for small
6990 This is a workaround which replaces broken commit 8f1bc284.
6994 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
6996 Date: Thu Aug 30 15:03:05 2007 +0200
6998 Reduce BOOTDELAY variable to 1 second by default for STK1002
7003 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
7005 Date: Thu Aug 30 15:03:04 2007 +0200
7007 Remove double quotation marks around MAC address for STK1002
7012 commit ff13ac8c7bbebb238e339592de765c546dba1073
7014 Date: Thu Aug 30 14:42:15 2007 +0200
7016 Backout commit 8f1bc284 as it causes TFTP to fail.
7020 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
7022 Date: Thu Aug 30 02:26:17 2007 -0500
7024 Revert "Fix MPC8544DS PCIe3 scsi."
7026 This reverts commit 9468e680.
7027 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
7031 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
7033 Date: Wed Aug 29 18:26:24 2007 -0600
7035 tftp: don't implicity trust the format of recevied packets
7037 The TFTP OACK code trusts that the incoming packet is formated as
7038 ASCII text and can be processed by string functions. It also has a
7039 loop limit overflow bug where if the packet length is less than 8, it
7040 ends up looping over *all* of memory to find the 'blksize' string.
7042 This patch solves the problem by forcing the packet to be null
7043 terminated and using strstr() to search for the sub string.
7047 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
7049 Date: Wed Aug 29 16:31:18 2007 +0200
7051 ppc4xx: Change lwmon5 default environment to support Linux RTC
7053 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
7054 to supply the RTC I2C address as bootline parameter. This patch
7055 adds support for this rtc probing parameter to the bootargs:
7057 "rtc-pcf8563.probe=0,0x51"
7061 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
7063 Date: Wed Aug 29 09:06:05 2007 -0500
7065 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
7067 this had slipped through the cracks, since the sbc board was added
7068 after I wrote the original patch to remove all these symbols, and
7069 before it was merged.
7073 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
7075 Date: Wed Aug 29 14:05:30 2007 +0200
7077 Add mii_init() prototype
7079 to get rid of a *lot* of compiler warnings.
7083 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
7085 Date: Wed Aug 29 13:35:03 2007 +0200
7087 Disable network support on cmi_mpc5xx board
7089 ..because it caused compiler errors and there seems to be no
7090 board maintainer to take care of this.
7094 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
7096 Date: Mon Aug 20 09:44:00 2007 -0500
7098 Fix MPC8544DS PCIe3 scsi.
7102 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
7103 is allocating memory space it doesn't need.
7108 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
7110 Date: Tue Aug 21 09:38:59 2007 -0500
7114 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
7115 correct consoledev needed for linux boot.
7116 Standardize on fdt{file,addr} var to hold dtb file name.
7118 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
7122 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
7124 Date: Thu Aug 23 15:20:54 2007 -0400
7126 Enable L2 cache for MPC8568MDS board
7128 The L2 cache size is 512KB for 8568, print out the correct informaiton.
7132 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
7134 Date: Wed Aug 22 17:54:49 2007 +0800
7136 Remove the bios emulator binary files from MAI board
7140 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
7142 Date: Tue Aug 21 17:00:17 2007 -0500
7144 support board vendor-common makefiles
7146 if a board/$(VENDOR)/common/Makefile exists, build it.
7148 also add the first such case, board/freescale/common/Makefile, to
7149 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
7150 dictated by board configuration.
7152 thusly get rid of alternate build dir errors such as:
7154 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
7156 by putting the common/ mkdir command in its proper place (the common
7157 Makefile). Common bits from existing individual board Makefiles have
7162 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
7164 Date: Tue Aug 21 15:52:33 2007 +0200
7166 Fix: TFTP is not working on little endian systems
7168 TFTP does not work anymore after multicast tftp
7169 patch was applied on little endian systems.
7174 commit 5f470948570526e9186f053a3003da7719604e90
7176 Date: Tue Aug 21 15:50:33 2007 +0200
7178 Fix MAC address setting in DM9000 driver.
7180 The logic to check if there is a correct MAC address in the DM9000
7181 EEPROM, added in the last patch, is wrong. Now the MAC address is
7182 always taken from the environment, even if a suitable MAC is present
7187 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
7189 Date: Tue Aug 21 12:40:34 2007 +0200
7191 MPC5xxx: fix some compiler warnings in USB code
7193 Fix the following warnings:
7194 - usb.c:xx: warning: function declaration isn't a prototype
7195 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
7196 from pointer wihtout a cast
7200 commit 16e23c3f5dab6937f5109365416808c7f15c122b
7202 Date: Mon Aug 20 23:55:33 2007 -0500
7204 fsl_pci_init - Remove self PCSRBAR allocation
7206 CPU physical address space was being wasted by allocating a
7207 PCSRBAR PCI inbound region to it's memory space.
7209 As a rule, PCSRBAR should be left alone since it does not affect
7210 transactions from self and other masters may have changed it.
7214 commit 0e700ce03a23bb1921149bc77008ace7103d5289
7216 Date: Mon Aug 20 13:56:47 2007 +0200
7218 Fix compiler warning in include/s3c2410.h
7220 This patch fixes the "type qualifiers ignored on fuction return tpye"
7221 warning for include/s3c2410.h
7225 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
7227 Date: Mon Aug 20 07:09:05 2007 +0200
7229 Fix compilation error for omap2420h4_config.
7231 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
7232 and flash_probe() calls in env_flash.c.
7236 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
7238 Date: Fri Aug 10 14:34:14 2007 -0500
7240 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
7242 and make some minor corrections to the FDT part of the README.
7246 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
7248 Date: Wed Aug 29 01:32:05 2007 +0200
7250 Minor coding style cleanup.
7254 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
7256 Date: Tue Aug 28 17:40:33 2007 +0200
7258 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
7262 commit f98984cb194bb34dbe1db9429d3b51133af30d07
7264 Date: Tue Aug 28 17:39:14 2007 +0200
7266 IDE: - make ide_inb () and ide_outb () "weak", so boards can
7267 define there own I/O functions.
7268 (Needed for the pcs440ep board).
7269 - The default I/O Functions are again 8 Bit accesses.
7270 - Added CONFIG_CMD_IDE for the pcs440ep Board.
7274 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
7276 Date: Mon Aug 20 19:00:01 2007 +0300
7278 AVR32: Change prototype of memset
7283 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
7285 Date: Sat Aug 25 05:07:16 2007 +0200
7287 POST: limit memory test area to not touch global data anymore
7289 As experienced on lwmon5, on some boards the POST memory test can
7290 corrupt the global data buffer (bd). This patch fixes this issue
7291 by checking and limiting this area.
7296 commit 75e1a84d483e36be10e206e539b028c4889e1158
7298 Date: Fri Aug 24 15:41:42 2007 +0200
7300 ppc4xx: Add RTC POST test to lwmon5 board configuration
7302 Since this RTC POST test is taking quite a while to complete
7303 it's only initiated upon special keypress same as the complete
7308 commit d7bfa620037a6d2210159387571bdf93aa32c162
7310 Date: Fri Aug 24 15:19:10 2007 +0200
7312 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
7316 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
7318 Date: Thu Aug 23 11:02:37 2007 +0200
7320 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
7322 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
7323 board. Now the "eeprom" command can be used to read/write from/to this
7324 device. Additionally a new command was added "eepromwp" to en-/disable
7325 the write-protect of this 2nd EEPROM.
7327 The 1st EEPROM is not affected by this write-protect command.
7331 commit c64fb30e4c5976007d56fc1789c7a0666082b536
7333 Date: Wed Aug 22 08:56:09 2007 +0200
7335 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
7339 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
7341 Date: Tue Aug 21 16:27:57 2007 +0200
7343 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
7345 This patch adds support for the matrix keyboard on the lwmon5 board.
7346 Since the implementation in the dsPCI is kind of compatible with the
7347 "old" lwmon board, most of the code is copied from the lwmon
7352 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
7354 Date: Sun Aug 19 10:27:34 2007 +0200
7356 Fix some build errors.
7360 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
7362 Date: Sat Aug 18 22:00:38 2007 +0200
7366 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
7368 Date: Thu Aug 16 22:52:39 2007 -0500
7370 lib_ppc: make board_add_ram_info weak
7372 platforms wishing to display RAM diagnostics in addition to size,
7373 can do so, on one line, in their own board_add_ram_info()
7376 this consequently eliminates CONFIG_ADD_RAM_INFO.
7378 Thanks to Stefan for the hint.
7382 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
7384 Date: Fri Aug 17 12:43:44 2007 +0900
7386 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
7388 This patch has been sent on:
7391 Many users of PCI config read routines tend to ignore the function
7392 ret value, and are only concerned about the contents of *val. Based
7393 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
7394 the *val on dword read error.
7396 Without this fix, for example, we'll go on scanning bus with vendor or
7397 header_type uninitialized. This brings many unnecessary config trials.
7401 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
7403 Date: Sat Aug 18 14:37:52 2007 +0200
7405 ColdFire: Fix some remaining problems with CFG_CMD_
7409 commit 8280f6a1c43247616b68224675188e5ccd124650
7411 Date: Sat Aug 18 14:33:02 2007 +0200
7413 Coding style cleanup
7417 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
7419 Date: Thu Aug 16 19:23:50 2007 -0500
7421 ColdFire: Add M5235EVB Platform for MCF523x
7425 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
7427 Date: Fri Aug 17 09:30:00 2007 -0500
7429 mpc83xx: fix typo in DDR2 programming
7431 introduced in the implement board_add_ram_info patch as I was cleaning out the
7432 magic numbers. sorry.
7436 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
7438 Date: Thu Aug 16 22:53:09 2007 -0500
7440 mpc83xx: move freescale boards to boards/freescale
7442 includes build fixes.
7446 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
7448 Date: Thu Aug 16 22:52:59 2007 -0500
7450 mpc83xx: suppress unused variable 'val8' warning
7454 commit bbea46f76f767b919070b4829bf34c86bd223248
7456 Date: Thu Aug 16 22:52:48 2007 -0500
7458 mpc83xx: implement board_add_ram_info
7460 add board_add_ram_info, to make memory diagnostic output more
7461 consistent. u-boot banner output now looks like:
7463 DRAM: 256 MB (DDR1, 64-bit, ECC on)
7465 and for boards with SDRAM on the local bus, a line such as this is
7468 SDRAM: 64 MB (local bus)
7470 also replaced some magic numbers with their equivalent define names.
7474 commit 14778585d1389d86d5846efec29e5fce892680ce
7476 Date: Fri Aug 17 10:35:59 2007 +0800
7478 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
7480 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
7481 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
7485 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
7487 Date: Thu Aug 16 15:05:11 2007 -0500
7489 ColdFire: Add M54455EVB for MCF5445x
7493 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
7495 Date: Thu Aug 16 13:20:50 2007 -0500
7497 ColdFire: Add M5253EVBE platform for MCF52x2
7501 commit a605aacd8324094199402816cc6d9124aba57b8d
7503 Date: Thu Aug 16 05:04:31 2007 -0500
7505 ColdFire: Add M5249EVB platform for MCF52x2
7509 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
7511 Date: Wed Aug 15 20:32:06 2007 -0500
7513 ColdFire: Update Freescale MCF52x2 platforms
7517 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
7519 Date: Wed Aug 15 19:55:10 2007 -0500
7521 ColdFire: Update EB+MCF-EV123 platform
7525 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
7527 Date: Wed Aug 15 19:46:38 2007 -0500
7529 ColdFire: update TASREG platform for MCF52x2
7533 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
7535 Date: Wed Aug 15 19:45:51 2007 -0500
7537 ColdFire: update r5200 platform for MCF52x2
7541 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
7543 Date: Wed Aug 15 19:43:20 2007 -0500
7545 ColdFire: idmr platform MCF52x2 update
7549 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
7551 Date: Wed Aug 15 19:41:06 2007 -0500
7553 ColdFire: cobra5272 platform for MCF52x2 update
7557 commit 56115665b4a64c10c01440c57749b265e0908fa4
7559 Date: Wed Aug 15 19:38:15 2007 -0500
7561 ColdFire: MCF52x2 Header files update
7565 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
7567 Date: Wed Aug 15 19:21:21 2007 -0500
7569 ColdFire: MCF52x2 update
7573 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
7575 Date: Wed Aug 15 18:46:11 2007 -0500
7577 ColdFire: MCF5329 update cache
7581 commit 7171977fb8fd77cfb6676953fa9a05789c450513
7583 Date: Wed Aug 15 15:40:20 2007 -0500
7585 ColdFire: MCF5329 header file clean up
7589 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
7591 Date: Wed Aug 15 15:39:17 2007 -0500
7593 ColdFire: MCF5329 Update and cleanup
7597 commit 10327dc5541f947c0cf7e31fef86c4706169607a
7599 Date: Thu Aug 16 16:35:02 2007 -0500
7601 Add CONFIG_HAS_ETH0 to all boards with TSEC
7603 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
7604 to update TSEC1's device-tree node, so we need to add it
7605 to all the boards with TSECs. Do this for 83xx and 86xx, too,
7606 since they will eventually do something similar.
7610 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
7612 Date: Thu Aug 16 15:05:04 2007 -0500
7614 Update MPC8544 DS PCI memory map
7616 The PCIe bus that the ULI M1575 is connected to has no possible way of
7617 needing more than the fixed amount of IO & Memory space needed by the ULI.
7619 So make it use far less IO & memory space and have it use the shared LAW. This
7620 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
7625 commit ea5877e31ed63ade948fd1293895ec23fe01472e
7627 Date: Thu Aug 16 11:01:21 2007 -0500
7629 Fix up some fdt issues on 8544DS
7631 It looks like we had a merge issue that duplicated a bit of code
7632 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
7633 the MAC address properly set in the device tree on boot for TSEC1
7637 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
7639 Date: Thu Aug 16 15:16:03 2007 +0200
7641 PPC4xx:HCU4/5 cleanup
7643 Minor cleanups to confirm to the u-boot coding style.
7644 Some german expressions -> english.
7645 HCU5 enforces a unique IP adress for a given slot in the rack.
7649 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
7651 Date: Thu Aug 16 15:16:02 2007 +0200
7653 PPC4xx:HCU4/5 cleanup ecc/sdram init
7655 Make ecc initialisation robust, as DDR2-ECC errors may be generated
7656 while zeroing the RAM.
7658 Return 16 bytes (a cacheline) less than the available memory, as the
7659 board and/or PPC440EPx might have problems accessing the last bytes.
7663 commit d35b508a55508535b6e8445b718585d27df733d3
7665 Date: Wed Aug 15 22:29:56 2007 -0500
7667 fdt: suppress unused variable 'bd' warning
7671 commit 82bd9ee77490588d4da785d75829ca63d0176baf
7673 Date: Wed Aug 15 20:06:50 2007 -0500
7675 Fix warnings from of_data copy fix
7677 Forgot to cast of_flat_tree to ulong.
7681 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
7683 Date: Wed Aug 15 20:03:44 2007 -0500
7685 Don't wait for disconnected TSECs
7687 The TSEC driver's PHY code waits a long time for autonegotiation to
7688 complete, even if the link is down. The PHY knows the link is
7689 down or up before autonegotiation completes, so we can short-circuit
7690 the process if the link is down.
7694 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
7696 Date: Wed Aug 15 20:03:34 2007 -0500
7698 Fix numerous bugs in the 8568 UEC support
7700 Actually, fixed a large bug in the UEC for *all* platforms.
7701 How did this ever work?
7703 uec_init() did not follow the spec for eth_init(), and returned
7704 0 on success. Switch it to return the link like tsec_init()
7707 The immap for the 8568 was defined based on MPC8568, rather than
7712 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
7714 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
7719 commit 3a79013e2adda53332dfd0b511066a805e929a9d
7721 Date: Wed Aug 15 20:03:25 2007 -0500
7723 Define tsec flag values in config files
7725 The tsec_info structure and array has a "flags" field for each
7726 ethernet controller. This field is the only reason there are
7727 settings. Switch to defining TSECn_FLAGS for each controller
7728 in the config header, and we can greatly simplify the array, and
7729 also simplify the addition of future boards.
7733 commit ec7238229507e7f47533a611ea8c53319d234cf3
7735 Date: Wed Aug 15 20:03:13 2007 -0500
7737 Add support for building all boards with a TSEC
7739 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
7740 Now we can do a MAKEALL test on all of them!
7744 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
7746 Date: Wed Aug 15 17:30:56 2007 -0500
7748 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
7750 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
7751 neglected to *also* put the code inside the similar #ifdef
7752 for CONFIG_OF_FLAT_TREE.
7756 commit 78f9fef7f406078c8bf7191e665a73f795157746
7758 Date: Wed Aug 15 15:46:46 2007 -0500
7760 mpc885ads: Don't define CONFIG_BZIP2.
7762 bzip2 requires a significant chunk of malloc space, and there isn't
7763 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
7764 and a downloaded image at 0x400000.
7768 commit 002275a3ed8b114885f6702d6d544d0780dfe689
7770 Date: Thu Aug 16 08:54:10 2007 +0200
7772 Bios emulator - fix microblaze toolchain problem
7774 microblaze CPU have problem with bios_emulator code.
7775 Microblaze toolchain doesn't support PRAGMA PACK.
7779 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
7781 Date: Thu Aug 16 11:51:04 2007 +0200
7783 Minor Coding Style fix; Update CHANGELOG file.
7787 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
7789 Date: Thu Aug 16 11:21:49 2007 +0200
7791 ppc4xx: Remove #warning in esd auto_update.c
7795 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
7797 Date: Fri Jun 22 17:32:28 2007 +0200
7799 ppc7xx: Update CPCI750 board
7801 This small CPCI750 update extends the board specific command
7802 "show_config" to display the Marvell strapping registers and
7803 extends the PCI IDE controller.
7808 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
7810 Date: Thu Aug 16 10:46:28 2007 +0200
7812 [FIX] Changes for bios_emulator code for others architecture
7814 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
7816 Date: Thu Aug 16 10:45:09 2007 +0200
7818 [FIX] Remove unused include file
7820 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
7822 Date: Thu Aug 16 10:18:33 2007 +0200
7824 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
7828 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
7830 Date: Thu Aug 16 09:54:51 2007 +0200
7832 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
7836 commit 02ba7022f62bb75908296c58c63866e1d294b69a
7838 Date: Thu Aug 16 09:52:29 2007 +0200
7840 ppc4xx: Update Sequoia/Rainier bootstrap command
7842 As suggested by David Mitchell, here an update for the Sequoia/Rainier
7847 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
7849 Date: Wed Aug 15 22:30:39 2007 -0500
7851 mpc83xx: enable libfdt by default on freescale boards
7853 this enables libfdt code by default for the
7854 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
7855 mpc8349itx and gp boards.
7859 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
7861 Date: Wed Aug 15 22:30:33 2007 -0500
7863 mpc83xx: migrate remaining freescale boards to libfdt
7865 this adds libfdt support code for the freescale
7866 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
7869 Boards remain compatible with OF_FLAT_TREE.
7873 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
7875 Date: Wed Aug 15 22:30:26 2007 -0500
7877 mpc83xx: move common /memory node update mechanism to cpu.c
7879 also adds common prototypes to include/common.h.
7883 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
7885 Date: Wed Aug 15 22:30:19 2007 -0500
7887 mpc83xx: remaining 8360 libfdt fixes
7889 PCI clocks and QE frequencies weren't being updated, and the core clock
7890 was being updated incorrectly. This patch also adds a /memory node if
7891 it doesn't already exist prior to update.
7893 plus some cosmetic trimming to single line comments.
7897 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
7899 Date: Wed Aug 15 22:30:12 2007 -0500
7901 mpc83xx: fix UEC2->1 typo in libfdt setup code
7905 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
7907 Date: Wed Aug 15 22:30:05 2007 -0500
7909 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
7911 and reorder the existing 83xx maintainers alpha.
7915 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
7917 Date: Wed Aug 15 21:15:05 2007 +0200
7919 [FIX] Resolve problem with warnings
7920 microblaze toolchain don't support PRAGMA PACK.
7922 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
7924 Date: Wed Aug 15 21:05:07 2007 +0200
7926 [FIX] Correction command setting for Microblaze boards
7928 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
7930 Date: Wed Aug 15 21:03:41 2007 +0200
7932 [FIX] Correction command definition
7934 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
7936 Date: Wed Aug 15 11:55:35 2007 -0500
7938 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
7940 Remove a leftover in net/tftp.c while we're at it.
7944 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
7946 Date: Wed Aug 15 12:20:40 2007 -0500
7948 Move the MPC8641HPCN board under board/freescale.
7950 Minor path corrections needed to ensure buildability.
7954 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
7956 Date: Wed Aug 15 11:46:22 2007 -0500
7958 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
7960 Remove a leftover in net/tftp.c while we're at it.
7964 commit 210f463c71917b7a4495c2103c228b9c179ae64d
7966 Date: Wed Aug 15 11:13:15 2007 -0400
7968 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
7970 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
7971 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
7972 when it should have gone inside of the conditional. As a result, it
7973 broke non-LIBFDT board builds.
7975 Also added a missing "not." to the comment.
7979 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
7981 Date: Wed Aug 15 12:14:23 2007 +0200
7983 PPC4xx:HCU4/5-Board fix compile warning
7987 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
7989 Date: Tue Aug 14 14:06:45 2007 -0500
7991 Fix malloc size error in ahci_init_one.
7993 Typically this causes scsi init to corrupt the
7994 devlist and break the coninfo command.
7995 Fix a compiler size warning.
8001 commit b361acd64fd2525c081b9b288b0804efe209c0e9
8003 Date: Tue Aug 14 10:02:16 2007 -0700
8005 TI DaVinci - fix unsupported %hhx format
8009 commit f01dbb5424a81453c81190dd30e945891466f621
8011 Date: Tue Aug 14 18:42:36 2007 +0200
8013 Coding style cleanup. Update CHANGELOG.
8017 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
8019 Date: Tue Aug 14 10:32:59 2007 -0500
8021 Fix initrd/dtb interaction
8023 The original code would wrongly relocate the blob to be right before
8024 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
8025 if it is defined. So we make two changes:
8027 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
8029 2) If the blob is being relocated, relocate it before kbd, not initrd
8033 commit e54b970173769307a116bd34028b6d0c2eea2a4e
8035 Date: Tue Aug 14 15:40:00 2007 +0100
8037 Supply spi interface in at45.c
8039 commit 4ce846ec59f36b85d6644a769690ad3feb667575
8041 Date: Tue Aug 14 15:12:01 2007 +0200
8043 POST: Fix merge problem
8047 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
8049 Date: Tue Aug 14 15:03:17 2007 +0200
8051 Coding style cleanup
8055 commit 779e975117a75e91fcebe226a63104dbfb924ab1
8057 Date: Tue Aug 14 14:44:41 2007 +0200
8059 ppc4xx: Add initial Zeus (PPC405EP) board support
8063 commit c5a172a5fd636c12467429e3f7910e53773979c6
8065 Date: Tue Aug 14 14:41:55 2007 +0200
8067 POST: Add option for external ethernet loopback test
8069 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
8070 is not done using an internal loopback connection, but by assuming
8071 that an external loopback connector is plugged into the board.
8075 commit eb2b4010ae426245172988804ee8d9193fb41038
8077 Date: Tue Aug 14 14:39:44 2007 +0200
8079 POST: Add ppc405 support to cache and UART POST
8083 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
8085 Date: Tue Aug 14 10:46:32 2007 +0100
8087 Replace lost end of at45.c.
8089 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
8091 Date: Tue Aug 14 10:30:06 2007 +0100
8093 Update Makefiles for merged and split at45.c.
8095 commit 3454cece2db57cb9eb7087995f7e73066a163f71
8097 Date: Tue Aug 14 10:21:06 2007 +0100
8099 Delete the merged files.
8101 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
8103 Date: Tue Aug 14 10:14:05 2007 +0100
8107 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
8109 Date: Tue Aug 14 10:10:52 2007 +0100
8111 Add MACH_TYPE records for several AT91 boards.
8112 Merge to two at45.c files into a common file, split to at45.c and spi.c
8113 Fix spelling error in DM9161 PHY Support.
8114 Initialize at91rm9200 board (and set LED).
8115 Add PIO control for at91rm9200dk LEDs and Mux.
8116 Change dataflash partition boundaries to be compatible with Linux 2.6.
8121 commit 4ef35e53c693556c54b0c22d6f873de87bade253
8123 Date: Tue Aug 14 09:54:46 2007 +0200
8125 Coding style cleanup, update CHANGELOG
8129 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
8131 Date: Tue Aug 14 09:47:27 2007 +0200
8133 Coding style cleanup; rebuild CHANGELOG
8135 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
8136 Author: Randy Vinson <rvinson@linuxbox.(none)>
8137 Date: Tue Feb 27 19:42:22 2007 -0700
8139 85xxCDS: Add make targets for legacy systems.
8141 The PCI ID select values on the Arcadia main board differ depending
8142 on the version of the hardware. The standard configuration supports
8143 Rev 3.1. The legacy target supports Rev 2.x.
8147 commit e41094c7e38177c755fbd9b182018069614f080d
8149 Date: Tue Aug 14 01:50:09 2007 -0500
8151 85xxCDS: Enable the VIA PCI-to-ISA bridge.
8153 Author: Randy Vinson <rvinson@linuxbox.(none)>
8155 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
8161 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
8163 Date: Tue Aug 14 00:14:25 2007 -0500
8165 Add support for UEC to 8568
8170 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
8172 Date: Tue Jun 19 14:18:34 2007 -0400
8174 Add PCI support for MPC8568MDS board
8176 This patch is against u-boot-mpc85xx.git of www.denx.com
8181 commit d111d6382c99fdea08c2312eeeae8786945e189a
8183 Date: Tue Jun 19 14:18:32 2007 -0400
8185 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
8187 This patch is against u-boot-mpc85xx.git of www.denx.com
8189 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
8190 both MPC8548CDS board and MPC8568MDS board, especially for supporting
8193 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
8194 DDR2 on all current board versions especially ver 1.92 or later to bring
8199 commit 3db0bef59eab1155801618cef5c481e97553b597
8201 Date: Tue Aug 7 18:07:27 2007 -0500
8203 Use an absolute address when jumping out of 4k boot page
8205 On e500 when we leave the 4k boot page we should use an absolute address since
8206 we don't know where the board code may want us to be really running at.
8210 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
8212 Date: Mon Aug 13 14:49:59 2007 -0500
8214 MPC85xx BA bits not set for 3-bit bank address DIMM
8216 The current implementation does not set the number of bank address bits
8217 (BA) in the processor. The default assumes 2 logical bank bits. This
8218 works fine for a DIMM that uses devices with 4 internal banks (SPD
8219 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
8220 devices with 8 internal banks (SPD byte17 = 0x8).
8224 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
8226 Date: Mon Aug 13 14:38:06 2007 -0500
8228 Fix minor 85xx warnings
8230 Some patches had inserted warnings into the build:
8231 * mpc8560ads declared data without using it
8232 * cpu_init declared ecm and immap without using it in all CONFIGs
8233 * MPC8548CDS.h had its default filenames changed so that they contained
8234 "\m" in the paths. Made the defaults not Windows-specific (or
8239 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
8241 Date: Fri Jul 27 01:50:52 2007 -0500
8243 8548cds PCIE support.
8245 Make the early L1 cache stack region guarded to prevent speculative
8246 fetches outside the locked range.
8248 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
8249 init.S whitespace cleanup.
8251 Allow TEXT_BASE value to be specified on command line. This allows it
8252 to be set to 0xfffc0000 which cuts the uboot binary in half.
8254 Clear and enable lbc and ecm errors.
8256 Update last_busno in device-tree for pci and pcie.
8258 Remove load of obsolete cpu/mpc85xx/pci.0
8263 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
8265 Date: Fri Jul 27 01:50:51 2007 -0500
8269 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
8271 Enable LBC and ECM errors and clear error registers.
8273 Add tftpflash env var to get uboot from tftp server and flash it.
8275 Add pci/pcie convenience env vars to display register space:
8276 "run pcie3regs" to see all pcie3 ccsr registers
8277 "run pcie3cfg" to see all cfg registers
8278 Whitespace cleanup and MPC8544DS.h
8280 Enable CONFIG_INTERRUPTS.
8285 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
8287 Date: Tue Aug 14 01:34:21 2007 -0500
8289 85xx start.S cleanup and exception support
8293 Support external interrupts from platform to eliminate system hangs.
8294 Define CONFIG_INTERRUPTS board configure option to enable.
8295 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
8297 Remove extra cpu initialization redundant with hardware initialization.
8300 Define and use _START_OFFSET consistent with other processors using
8303 Move additional code from .text to boot page to make room for
8304 exception vectors at start of image.
8306 Handle Machine Check, External and Critical exceptions.
8308 Fix e500 machine check error determination in traps.c
8310 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
8315 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
8317 Date: Tue Aug 14 01:33:18 2007 -0500
8319 Add MPC8544DS README
8323 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
8325 Date: Fri Jul 27 01:50:48 2007 -0500
8327 85xx allow debugger to configure ddr.
8329 Only check for mpc8548 rev 1 when compiled for 8548.
8334 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
8336 Date: Fri Jul 27 01:50:47 2007 -0500
8338 mpc85xx L2 cache reporting and SRAM relocation option.
8340 Allow debugger to override flash cs0/cs1 settings to enable alternate
8346 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
8348 Date: Fri Jul 27 01:50:46 2007 -0500
8350 e500 needs ppc_asm.tmp MCK_EXCEPTION
8352 Always define MCK_EXCEPTION macro - so e500 can use it too.
8357 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
8359 Date: Mon Jun 11 10:41:07 2007 -0500
8361 multicast tftp: RFC2090
8363 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
8364 on Realtek RTL8139 and Freescale TSEC.
8369 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
8371 Date: Sat Jul 28 10:56:13 2007 -0400
8373 New CONFIG_BOOTP_SERVERIP option
8375 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
8376 from the bootp server
8381 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
8383 Date: Sun Aug 12 08:48:27 2007 +0300
8385 Add ability to take MAC address from the environment to DM9000 driver
8390 commit be5d72d10d47609326226225181e301fb9a33b58
8392 Date: Mon Aug 13 21:57:53 2007 +0200
8394 Minor coding style cleanup. Update CHANGELOG.
8398 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
8400 Date: Sat Aug 11 06:54:58 2007 -0500
8402 Modify SBC8641D to use new Freescale PCI routines
8404 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
8410 commit a08458303e7f9db67f296980036d3292c35cb45c
8412 Date: Fri Jun 29 18:38:51 2007 +0200
8414 atmel_mci: Fix data timeout value
8416 Calculate the data timeout based on values from the CSD instead of
8417 just using a hardcoded DTOR value. This is a backport of a similar fix
8418 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
8423 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
8425 Date: Mon Aug 13 17:22:31 2007 +0200
8427 AVR32: Include <div64.h> instead of <asm/div64.h>
8429 include/asm-avr32/div64.h was recently moved to include/div64.h, but
8430 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
8431 the patch was merged perhaps?)
8433 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
8438 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
8440 Date: Wed Jun 27 13:34:26 2007 +0200
8442 atmel_mci: Use 512 byte blocksize if possible
8444 Instead of always using the largest blocksize the card supports, check
8445 if it can support smaller block sizes and use 512 bytes if possible.
8446 Most cards do support this, and other parts of u-boot seem to have
8447 trouble with block sizes different from 512 bytes.
8449 Also enable underrun/overrun protection.
8454 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
8456 Date: Mon Aug 13 09:05:33 2007 +0200
8458 ppc4xx: Fix problem in PLL clock calculation
8461 and fixes a bug in the PLL clock calculation.
8465 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
8467 Date: Sun Aug 12 21:34:50 2007 +0200
8471 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
8473 Date: Sun Aug 12 21:34:34 2007 +0200
8475 Minor alignment of output, 2nd try.
8476 Also update CHANGELOG
8480 commit 6b309f22a724fad8418e811751a0741b893419cf
8482 Date: Sun Aug 12 20:35:49 2007 +0200
8484 Minor alignment of output
8488 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
8490 Date: Sun Aug 12 18:28:18 2007 +0200
8492 Cleanup output on ADS5121 board
8494 Signed-off-by: Wolfgang Denk
8496 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
8498 Date: Sun Aug 12 15:11:38 2007 +0200
8500 Adapt board configuration and fix kernel crash on MCC200 board.
8502 The update procedure was modified to turn off the USB subsystem
8503 before exit for MCC200 and TRAB. This is necessary as otherwise the
8504 USB controller continues to write periodically to system memory!
8506 MCC200-specific notes:
8507 - the patch disables the magic key check for MCC200
8508 - the patch contains the configuration changes made
8509 for the new revision of the board.
8514 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
8516 Date: Sun Aug 12 14:47:54 2007 +0200
8518 Adjust default configuration of ADS5121 board.
8522 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
8524 Date: Sun Aug 12 14:27:39 2007 +0200
8526 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
8530 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
8532 Date: Tue Aug 7 21:14:22 2007 -0400
8534 Improve error print messages.
8538 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
8540 Date: Tue Jul 17 13:57:04 2007 -0500
8542 fdt: allow for builds that don't want env and bd_t nodes
8544 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
8549 commit 91148bf7aeba142d6f348805db7625db7da64d6f
8551 Date: Tue Jul 17 13:56:53 2007 -0500
8553 fdt: do board setup based on fdt address specified on bootm line
8555 The last fdt patch to bootm did board setup based on the address
8556 specified by a prior fdt address command invocation. The bootm
8557 code, as its call to fdt_chosen does, should use the fdt specified
8558 by the user on the bootm command. Note this restores full
8559 functionality for the 8360's existing default boot environment
8560 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
8561 before booting a kernel).
8565 commit e125a2ffc209dd34794e326c7175658253beadf3
8567 Date: Tue Jul 10 20:40:39 2007 -0400
8569 Call ft_board_setup() from the bootm command.
8571 In the patch titled "Create new fdt boardsetup command..." I removed the
8572 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
8573 to add a direct call back into cmd_bootm.c
8575 This fixes the oversight by adding the direct call to the bootm command.
8579 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
8581 Date: Mon Jun 25 23:25:28 2007 -0400
8583 Create new fdt boardsetup command, fix bug parsing [] form of set values.
8585 Previously ft_board_setup() was called by fdt_chosen() which was not
8586 really correctly structured. This splits ft_board_setup() out by creating
8587 a new fdt boardsetup command.
8589 Fix a bug when parsing fdt set command values which have the square
8590 bracket form [00 11 22 33] - the length was updated incorrectly in when
8595 commit 6f35ded9e85493595e0eb66a82b502a95326d049
8597 Date: Mon Jun 25 20:55:58 2007 -0400
8599 Tighten up the error messages.
8603 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
8605 Date: Mon Jun 25 19:52:23 2007 -0400
8607 Asthetic improvements: error messages and line lengths.
8609 Tighten up the error messages, split overlength lines.
8613 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
8615 Date: Fri May 25 22:08:57 2007 -0400
8617 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
8619 The fdt_chosen() function was adding/seting some properties ad-hoc
8620 improperly and duplicated (poorly) what was done in ft_board_setup()
8622 Clean up long lines (setting properties, printing errors).
8626 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
8628 Date: Mon May 21 23:27:16 2007 -0400
8630 For fdt_find_node_by_path(), handle the root path properly.
8632 Also removes the special case root path detection in cmd_fdt.c since it
8633 is no longer necessary.
8637 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
8639 Date: Thu May 17 23:54:36 2007 -0400
8641 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
8646 commit 1a861169bc3758f9de3aead62b058736c6891246
8648 Date: Wed Jun 6 22:47:58 2007 -0400
8650 Replace fdt_node_offset() with fdt_find_node_by_path().
8652 The new name matches more closely the kernel's name, which is also
8653 a much better description.
8658 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
8660 Date: Wed May 16 22:39:59 2007 -0400
8662 Fix cmd_fdt line lengths, refactor code.
8664 Break lines that were greater than 80 characters in length.
8665 Move the fdt print and property parsing code to separate static functions
8666 to reduce coding clutter in the fdt_cmd handling body.
8670 commit 25114033ab21788810c48ba4df103b649da1223b
8672 Date: Sat May 12 09:47:25 2007 -0400
8674 FDT command improvements.
8676 Fix "fdt set" so that it will create a non-existing property.
8677 Add "fdt mknode" to create nodes.
8681 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
8683 Date: Sat May 12 09:45:46 2007 -0400
8685 Reorganize and fix problems (returns) in the bootm command.
8687 Do *NOT* return after the "point of no return" has been passed.
8688 If something goes wrong, the board must be reset after that point.
8689 Move the "Transferring control to Linux" debug message back to where it
8690 belongs: just before transferring control to linux.
8694 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
8696 Date: Tue May 8 21:27:35 2007 -0400
8698 Fix bugs in the CONFIG_OF_LIBFDT
8700 Stupid coding mistakes (identified by Timur Tabi, thanks).
8704 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
8706 Date: Wed Apr 25 22:47:15 2007 -0400
8708 Improve fdt move length handling.
8710 Make the length parameter optional: if not specified, do the move using
8711 the current size unchanged.
8715 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
8717 Date: Wed Apr 25 22:23:36 2007 -0400
8719 Minor code clean up.
8721 Declare the variable fdt properly as extern.
8722 Call the "set_fn" function pointer the "short way" without the full
8723 dereferencing syntax.
8727 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
8729 Date: Wed Apr 25 21:24:27 2007 -0400
8731 Improve error messages, more informative.
8733 Print more than the raw libfdt error message strings. This is especially
8734 useful for cluing in the user when the bootm command aborts due to
8739 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
8741 Date: Fri Apr 20 22:46:53 2007 -0400
8743 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
8745 This is the way u-boot reduces configured-out code. At Wolfgang
8746 Grandegger and Wolfgang Denk's request, make libfdt conform.
8750 commit 923efd286411ed052d9e074f59f8986d6081061c
8752 Date: Fri Aug 10 14:54:47 2007 -0700
8754 add image size and descriptors for Spartan 3E FPGA chips
8756 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
8760 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
8762 Date: Fri Aug 10 15:34:48 2007 -0500
8764 make MAKEALL more immune to merge conflicts
8766 ..by placing board entries one per line, as suggested by jdl.
8770 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
8772 Date: Fri Aug 10 13:28:25 2007 -0500
8774 README: Remove outdated cpu type, board type, and NAME_config lists
8778 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
8780 Date: Fri Aug 10 15:48:59 2007 +0800
8782 mpc83xx: Suppress the warning 'burstlen'
8784 suppress the warning 'burstlen' of spd_sdram.
8788 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
8790 Date: Thu Aug 9 15:11:03 2007 -0500
8792 Add support for SBC8641D. Config files.
8794 Add support for Wind River's SBC8641D reference board.
8800 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
8802 Date: Thu Aug 9 15:10:53 2007 -0500
8804 Add support for SBC8641D. Board files.
8806 Add support for Wind River's SBC8641D reference board.
8812 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
8814 Date: Fri Aug 10 20:34:58 2007 +0200
8816 Conding style cleanup
8820 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
8822 Date: Fri Aug 10 20:26:18 2007 +0200
8824 [ARM] TI DaVinci support, hopefully final
8826 Add support for the following DaVinci boards:
8833 - Split into separate board directories
8834 - Removed changes to MTD_DEBUG (or whatever it's called)
8835 - New CONFIG_CMD party line followed
8836 - Some cosmetic fixes, cleanup etc.
8837 - Patches against the latest U-Boot tree as of now.
8838 - Fixed CONFIG_CMD_NET in net files.
8839 - Fixed CONFIG_CMD_EEPROM for schmoogie.
8840 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
8841 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
8842 but it at least compiles.
8844 Here is an excerpt from session log on SCHMOOGIE...
8846 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
8855 ETH PHY : DP83848 @ 0x01
8857 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
8858 U-Boot > ping 192.168.253.10
8859 host 192.168.253.10 is alive
8867 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
8869 Date: Fri Jul 27 01:50:45 2007 -0500
8871 fsl_pci_init cleanup.
8873 Do not enable normal errors created during probe (master abort, perr,
8874 and pcie Invalid Configuration access).
8876 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
8881 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
8883 Date: Fri Jul 27 01:50:44 2007 -0500
8885 pciauto_setup_device bars_num fix
8887 Passing bars_num=0 to pciauto_setup_device should assign no bars.
8893 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
8895 Date: Mon Aug 6 17:39:44 2007 -0500
8897 8641hpcn: Do correct sized pointer math.
8899 When I rebased Ed's patch and cleaned up a few compilation
8900 problems, I apparently rebased my brain on crack first.
8901 Fix that by doing (char *) sized pointer math as needed.
8905 commit cfc7a7f5bb3273c9951173c788001d45118f141f
8907 Date: Thu Aug 2 14:42:20 2007 -0500
8912 Always set PICGCR_MODE.
8913 Enable machine check and provide board config option
8914 to set and handle SoC error interrupts.
8916 Include MSSSR0 in error message.
8918 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
8923 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
8925 Date: Fri Aug 10 10:42:25 2007 +0200
8927 Coding style cleanup
8931 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
8933 Date: Thu Aug 2 17:42:08 2007 +0200
8935 Make use of generic 64bit division in nand_util.c
8937 Use generic 64bit division in nand_util.c. This makes nand_util.c
8938 independent of any toolchain 64bit division.
8942 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
8944 Date: Thu Aug 2 17:41:14 2007 +0200
8946 Move 64bit division from avr32 to generic lib
8948 Move the 64bit division from lib_avr32 to lib_generic. With this, all
8949 boards can do_div/__div64_32 if needed, not only avr one. Code is put
8950 to lib_generic, so no larger memory footprint if not used. No code
8951 modifications. Thanks for proposal by Håvard Skinnemoen.
8955 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
8957 Date: Fri Jul 27 11:31:22 2007 +0200
8959 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
8963 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
8965 Date: Fri Jul 27 11:30:33 2007 +0200
8967 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
8971 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
8973 Date: Fri Jul 27 11:38:26 2007 +0200
8975 Add PPC4xx-HCU4 and HCU5 boards: common files
8979 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
8981 Date: Fri Jul 27 11:28:44 2007 +0200
8983 Add PPC4xx-HCU4 and HCU5 boards: make related
8987 commit 137fdd9f474ecb853efdace5200576308c67f18d
8989 Date: Fri Jul 27 11:28:03 2007 +0200
8991 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
8995 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
8997 Date: Fri Jul 27 11:27:15 2007 +0200
8999 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
9003 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
9005 Date: Fri Jul 27 11:25:31 2007 +0200
9007 Add PPC4xx-HCU4 and HCU5 boards: READMEs
9011 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
9013 Date: Fri Jul 27 11:37:40 2007 +0200
9015 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
9017 This series of patches adds support for 2 boards from Netstal Maschinen.
9019 The HCU4 has a PPC405Gpr and
9020 the HCU5 has a PPC440EPX.
9022 The HCU4 has a somehow complicated flash setup, as the booteprom is
9023 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
9026 The HCU5 has only a booteprom as the whole code will be downloaded from a
9027 different board which has HD, CD-ROM, etc and where all code is stored.
9029 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
9034 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
9036 Date: Fri Aug 10 08:42:55 2007 +0200
9038 ppc4xx: Update lwmon5 POST configuration
9042 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
9044 Date: Fri Aug 10 08:25:22 2007 +0200
9046 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
9048 The patch adds support for UART POST on ppc44x-based boards with no
9049 external serial clocks installed.
9054 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
9056 Date: Mon Aug 6 18:18:34 2007 -0500
9058 mpc83xx: fix ITX[GP] O=builddir builds
9060 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
9062 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
9063 "BUILD_DIR=<some dir> ./MAKEALL ..."
9067 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
9069 Date: Wed Aug 1 15:00:59 2007 +0800
9071 mpc83xx: Correct the README for DDR ECC
9073 Update the README for DDR ECC, change the name
9074 to README.mpc83xx.ddrecc.
9079 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
9081 Date: Wed Aug 1 15:00:15 2007 +0800
9083 mpc83xx: Consolidate the ECC support of 83xx
9085 Remove the duplicated source code of ecc command on the <board>.c,
9086 for reused, move these code to cpu/mpc83xx directory.
9091 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
9093 Date: Sat Aug 4 13:37:39 2007 +0800
9095 mpc83xx: Correct the burst length for DDR2 with 32 bits
9097 The burst length should be 4 for DDR2 with 32 bits bus
9101 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
9103 Date: Wed Jul 25 19:25:33 2007 -0500
9105 mpc83xx: add support for the MPC8323E RDB
9107 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
9108 five 10/100 ethernet ports connected via an ICPlus IP175C
9109 switch, one PCI slot, and serial. Features not supported
9110 in this patch are SD card interface, 2 USB ports, and the
9116 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
9118 Date: Wed Jul 25 19:25:28 2007 -0500
9120 mpc83xx: fixup generic pci for libfdt
9122 add libfdt support to the generic 83xx pci code
9126 commit f57ac7a7b37109245b69db80839ebee26179966a
9128 Date: Wed Jul 25 19:25:22 2007 -0500
9130 mpc83xx: fix 8360 and cpu functions to update fdt being passed
9132 ..and not the global fdt. Rename local fdt vars to blob so as not to
9133 be confused with the global var with the same three-letter name.
9137 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
9139 Date: Wed Jul 4 21:34:24 2007 -0400
9141 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
9143 Several node strings were not correct (trailing slashes and properties
9145 Added setting of the timebase-frequency.
9146 Improved error messages and use debug() instead of printf().
9151 commit 26d02c9bbac1751c5e19294f000100b48d43a920
9153 Date: Wed Jul 4 21:27:30 2007 -0400
9155 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
9157 The new name matches more closely the kernel's name, which is also
9158 a much better description.
9160 These are the mpc83xx changes made necessary by the function name change.
9166 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
9168 Date: Mon Jun 25 10:41:56 2007 +0800
9170 mpc83xx: Add support for the display of reset status
9172 83xx processor family has many reset sources, such as
9173 power on reset, software hard reset, software soft reset,
9174 JTAG, bus monitor, software watchdog, check stop reset,
9175 external hard reset, external software reset.
9176 sometimes, to figure out the fault of system, we need to
9177 know the cause of reset early before the prompt of
9183 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
9185 Date: Mon Jun 25 10:41:04 2007 +0800
9187 mpc83xx: Fix the align bug of SDMA buffer
9189 According to the latest user manual, the SDMA temporary
9190 buffer base address must be 4KB aligned.
9195 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
9197 Date: Mon Jun 25 13:21:12 2007 +0800
9199 mpc83xx: Revise the MPC8360EMDS readme doc
9201 When the rev2.x silicon mount on the MPC8360EMDS baord,
9202 and if you are using the u-boot version after the commit
9203 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
9204 to make the ethernet interface usable, we have to setup
9205 the jumpers correctly.
9210 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
9212 Date: Tue Jul 3 13:46:32 2007 -0500
9214 FSL I2C driver programs the two I2C busses differently
9216 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
9217 The second I2C bus has its slave address programmed incorrectly and is
9218 missing a 5-us delay.
9223 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
9225 Date: Tue Jul 3 13:04:34 2007 -0500
9227 Update SCCR programming in cpu_init_f() to support all 83xx processors
9229 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
9230 bitfields for all 83xx processors. The code to update some bitfields was
9231 compiled only on some processors. Now, the bitfields are programmed as long
9232 as the corresponding CFG_SCCR option is defined in the board header file.
9233 This means that the board header file should not define any CFG_SCCR macros
9234 for bitfields that don't exist on that processor, otherwise the SCCR will be
9235 programmed incorrectly.
9240 commit 9546266999f0b9b51372636614211b88d90f0f25
9242 Date: Fri Jun 22 13:04:22 2007 +0200
9244 TQM834x: cleanup configuraton
9246 Remove irritating #undef DEBUG
9251 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
9253 Date: Mon Jun 18 09:09:53 2007 -0700
9255 MPC83xx: Fix makefile to generate config.h file in the build directory
9257 MPC83xx: Fix the Makefile config sections to generate the include/config.h
9258 file in the build directory instead of the source directory.
9263 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
9265 Date: Thu Jun 14 20:07:33 2007 -0500
9267 mpc83xx: Add support for 8360 silicon revision 2.1
9269 This change adds 8360 silicon revision 2.1 support to u-boot.
9274 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
9276 Date: Wed Aug 8 04:14:28 2007 -0500
9278 Treat ppc64 host as ppc
9282 commit 0dc4279b08ff82472bec2e2c90858602459febe8
9284 Date: Wed Aug 8 09:01:46 2007 +0800
9286 Minor fix for bios emulator makefile
9288 Add $(obj) to LIB avoiding objects be built in the source dir
9292 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
9294 Date: Wed Aug 8 08:33:11 2007 +0800
9296 Add CONFIG_BIOSEMU define to guard all the bios emulator code
9300 This patch fix the compile issue on the board that did not enable the bios emulator
9302 commit ed8106433522f2ea8933e9808346860d061d7731
9304 Date: Tue Jul 31 12:27:25 2007 -0500
9306 tsec: fix multiple PHY support
9308 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
9309 broke multiple PHY support in tsec.c. This fixes it.
9314 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
9316 Date: Thu Aug 9 09:08:18 2007 -0500
9318 tsec: Allow Ten Bit Interface address to be configurable
9320 Allow the address of the Ten Bit Interface (TBI) to be changed in the
9321 event of a conflict with another device.
9325 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
9327 Date: Wed Aug 8 09:54:26 2007 +0200
9329 Coding style cleanup
9333 commit a41de1f0d373e09c782dea558385a06247111ba5
9335 Date: Sun Aug 5 05:15:18 2007 -0500
9337 Port enabled for I2C signals and chipselects port configuration.
9341 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
9343 Date: Sun Aug 5 04:31:18 2007 -0500
9349 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
9351 Date: Sun Aug 5 04:11:20 2007 -0500
9357 commit 99c03c175d2689093176facf17c58ce2cb320001
9359 Date: Sun Aug 5 03:58:52 2007 -0500
9361 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
9365 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
9367 Date: Sun Aug 5 03:55:21 2007 -0500
9369 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
9373 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
9375 Date: Sun Aug 5 03:43:30 2007 -0500
9377 Moved sync() from board file to include/asm-m68k/io.h
9381 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
9383 Date: Sun Aug 5 03:30:44 2007 -0500
9385 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
9389 commit 9998bd37ead85e93953559720710d3b0685c81e6
9391 Date: Sun Aug 5 03:19:10 2007 -0500
9393 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
9397 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
9399 Date: Tue Aug 7 16:17:06 2007 +0800
9401 Add CONFIG_BIOSEMU define to guard all the bios emulator code
9403 This patch fix the compile issue on the board that did not enable the bios emulator
9405 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
9407 Date: Tue Aug 7 16:02:13 2007 +0200
9409 Fix missing brace error in fs/fat/fat.c
9410 [pointed out by Roderik Wildenburg]
9414 commit 706714d97a0d08d59eda4de2268c39f504688329
9416 Date: Mon Aug 6 23:41:53 2007 +0200
9418 [FIX] remove cute code
9420 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
9422 Date: Mon Aug 6 23:35:26 2007 +0200
9424 [FIX] Fix romfs code
9426 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
9428 Date: Mon Aug 6 23:31:49 2007 +0200
9430 [FIX] Coding style cleanup - Wolfgang's suggestions
9432 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
9434 Date: Mon Aug 6 23:21:05 2007 +0200
9436 Fixed typo in README (pointed out by Martin Jost).
9440 commit 537223afa61f64480df31ce440a9cb386df4a814
9442 Date: Mon Aug 6 21:10:17 2007 +0200
9444 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
9447 here an updated Bamboo README.
9451 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
9453 Date: Mon Aug 6 02:17:36 2007 +0200
9455 Coding style cleanup. Update CHANGELOG.
9459 commit 221838cc7eb178370ff62aa05920a582e12ac322
9461 Date: Tue Jul 10 09:03:22 2007 +0800
9463 Remove the bios emulator from MAI board.
9465 The bios emulator in the MAI board can not pass compile
9466 and have a lot of crap in it. remove it and will have a
9467 clean and small bios emulator in the drivers directory
9468 which can be uesed for every board.
9472 commit 5618332409bb96f4448d1712899369fc80c0b489
9474 Date: Fri Jul 13 12:14:59 2007 +0800
9476 Fix some compile issues for MAI board.
9480 commit 0f460a1ee148b648ee242c3157650287d4296260
9482 Date: Fri Jul 13 12:14:58 2007 +0800
9484 Configurations for ATI video card BIOS emulator
9486 This patch add definition of the BIOS emulator and the ATI framebuffer
9487 driver for MPC8641HPCN board.
9492 commit ece92f85053b8df613edcf05b26a416cbc3d629c
9494 Date: Fri Jul 6 08:34:56 2007 +0800
9496 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
9497 ATI video card BIOS. and can be used for x86 code emulation by some
9502 commit 5072188acabde3178fac7f5a597150e6e74fd40c
9504 Date: Fri Jul 6 08:33:33 2007 +0800
9506 This is a framebuffer driver for ATI video card, can work for PCI9200,
9507 X300, X700, X800 ATI video cards.
9512 commit 5728be389e65fd47f34b33c2596271eb4db751ae
9514 Date: Mon Aug 6 01:01:49 2007 +0200
9516 Coding style cleanup. Update CHANGELOG.
9520 commit 8092fef4c29b395958bb649647da7e3775731517
9522 Date: Tue Dec 12 14:26:01 2006 +0100
9524 Add functions to list of exported functions
9526 Additionally export the following fuctions (to make trab_config build again):
9530 Also bump the ABI version to reflect this change
9534 commit 63cec5814fab5d2b1c86982327433807a5ac0249
9536 Date: Thu Aug 2 14:09:49 2007 -0500
9538 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
9540 All of the PCI/PCI-Express driver and initialization code that
9541 was in the MPC8641HPCN port has now been moved into the common
9542 drivers/fsl_pci_init.c. In a subsequent patch, this will be
9543 utilized by the 85xx ports as well.
9545 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
9547 Also enable the second PCI-Express controller on 8641
9548 by getting its BATS and CFG_ setup right.
9550 Fixed a u16 vendor compiler warning in AHCI driver too.
9556 commit a274ca4f6d68830e7c916f897561cff8c4101c38
9558 Date: Sun Aug 5 22:33:05 2007 +0200
9560 [FIX] Coding style cleanup
9562 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
9564 Date: Sun Aug 5 16:13:31 2007 +0200
9566 [FIX] Xilinx Uartlite driver
9567 Because PPC405 can use UARTLITE serial interface and
9568 Microblaze can use Uart16550 serial interface not only Uartlite.
9570 commit 98889edd50aadf862071eb5664747ad0d568a20e
9572 Date: Sun Aug 5 15:54:53 2007 +0200
9574 [FIX] Change configuration for XUPV2P Microblaze board
9576 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
9578 Date: Sun Aug 5 15:53:50 2007 +0200
9580 [PATCH] Added support for Xilinx Emac community driver
9582 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
9584 Date: Fri Aug 3 12:08:16 2007 +0200
9586 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
9588 Add the ability for modules from the Schindler cm5200 family to use a
9589 single U-Boot image:
9590 - rename cm1_qp1 to cm5200
9591 - add run-time module detection
9592 - parametrize SDRAM configuration according to the module we are running on
9594 Few minor, board-specific fixes included in this patch:
9595 - better MAC address handling
9596 - updated default environment ('update' command uses +{filesize} now)
9597 - improved error messages in the auto-update code
9598 - allow booting U-Boot from RAM (CFG_RAMBOOT)
9604 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
9606 Date: Fri Aug 3 04:05:25 2007 -0500
9608 Add Marvell 1149 PHY support to the TSEC
9610 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
9612 Date: Thu Aug 2 21:27:46 2007 +0200
9614 Coding style cleanup, update CHANGELOG
9618 commit 63e22764d2f8653f68888c667eb65b3996b52680
9620 Date: Thu Aug 2 10:11:18 2007 +0200
9622 Minor cleanup of <board>_nand build rules.
9624 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
9626 Date: Thu Aug 2 08:33:56 2007 +0200
9628 ppc4xx: Code cleanup
9632 commit c92409812206ac67a7fa7aae298539a9c3804a46
9634 Date: Tue Jul 31 18:51:48 2007 +0200
9636 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
9638 During config transactions on the PCIe bus an attempt to scan for a
9639 non-existent device can lead to a machine check exception with certain
9640 peripheral devices. In order to avoid crashing in such scenarios the
9641 instrumented versions of the config cycle read routines are introduced, so
9642 the exceptions fixups framework can gracefully recover.
9647 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
9649 Date: Tue Jul 31 18:19:54 2007 +0200
9651 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
9653 This brings back separate settings for PCIe bus numbers depending on chip
9654 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
9655 commit. 440SPe rev. A does NOT work properly with the same settings as for
9656 the rev. B (no devices are seen on the bus during enumeration).
9660 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
9662 Date: Thu Aug 2 00:48:45 2007 +0200
9664 Fix build errors and warnings / code cleanup.
9668 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
9670 Date: Tue Jul 31 10:24:56 2007 +0200
9672 ppc4xx: Update AMCC Bamboo 440EP support
9674 Changed storage type of cfg_simulate_spd_eeprom to const
9675 Changed storage type of gpio_tab to stack storage
9676 (Cannot access global data declarations in .bss until afer code relocation)
9678 Improved SDRAM tests to catch problems where data is not uniquely addressable
9679 (e.g. incorrectly programmed SDRAM row or columns)
9681 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
9682 Fixed AM29LV320DT (OpCode Flash) sector map
9687 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
9689 Date: Tue Jul 31 08:37:01 2007 +0200
9691 ppc4xx: Update 440EPx lwmon5 board support
9693 - Clear ECC status regs after ECC POST test
9694 - Set dcbz for ECC generation with caches enabled as default
9699 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
9701 Date: Mon Jul 30 11:04:57 2007 +0200
9703 ppc4xx: Only print ECC related info when the error bis are set
9707 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
9709 Date: Fri Jul 27 16:44:31 2007 +0200
9711 new FPGA image for PLU405 board
9713 new FPGA image for PLU405 board with improved CompactFlash timing
9717 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
9719 Date: Fri Jul 27 14:43:59 2007 +0200
9721 [ADS5121] Support for the ADS5121 board
9723 The following MPC5121e subsystems are supported:
9725 - low-level CPU init
9726 - NOR Boot Flash (common CFI driver)
9736 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
9738 Date: Fri Jul 27 14:22:04 2007 +0200
9740 [PPC] Remove unused MSR_USER definition
9744 commit d4024bb72dd81695ec099b2199eda0d27c623e62
9746 Date: Thu Jul 26 17:49:11 2007 +0200
9748 ppc4xx: Add support for AMCC 405EP Taihu board
9752 commit b66091de6c7390620312c2501db23d8391e7cabb
9754 Date: Thu Jul 26 15:08:01 2007 +0200
9756 ppc4xx: lwmon5: Update Lime initialization
9758 Change Lime SDRAM initialization to now support 100MHz and
9759 133MHz (if enabled). Also the framebuffer is initialized to
9760 display a blue rectangle with a white border.
9765 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
9767 Date: Tue Jul 24 09:52:52 2007 +0200
9769 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
9771 The used Intel NOR FLASH chips have internally two dies, and are now
9772 treated as two seperate chips.
9776 commit aedf5bde179ecfbd0a96130d18996a96518b785f
9778 Date: Tue Jul 24 07:20:09 2007 +0200
9780 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
9782 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
9783 interrupt controller.
9787 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
9789 Date: Fri Jul 20 15:03:44 2007 +0200
9791 ppc4xx: Fix bug with default GPIO output value
9793 As spotted by Matthias Fuchs, the default output values for all GPIO1
9794 outputs were not setup correctly. This patch fixes this issue.
9798 commit 531e3e8b831f357056448fa573137d5fb37000fd
9800 Date: Fri Jul 20 15:03:03 2007 +0200
9802 POST: Add ECC POST for the lwmon5 board
9804 This patch adds ECC Post test for the Lwmon5 board based
9805 on PPC440EPx to U-Boot.
9811 commit cc3023b9f95d7ac959a764471a65001062aecf41
9813 Date: Thu Jul 19 17:12:28 2007 +0200
9815 Fix breakage of 8xx boards from recent commit.
9817 This patch fixes the negative consequences for 8xx of the recent
9818 "ppc4xx: Clean up 440 exceptions handling" commit.
9822 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
9824 Date: Mon Jul 16 13:11:12 2007 +0200
9826 Coding style cleanup
9830 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
9832 Date: Mon Jul 16 10:02:12 2007 +0200
9834 ppc4xx: Code cleanup
9838 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
9840 Date: Mon Jul 16 10:01:38 2007 +0200
9842 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
9846 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
9848 Date: Mon Jul 16 10:00:43 2007 +0200
9850 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
9852 The new boardspecific DDR2 controller configuration is used for the Yucca
9853 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
9857 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
9859 Date: Mon Jul 16 09:57:00 2007 +0200
9861 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
9863 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
9864 support non default, boardspecific DDR(2) controller configuration.
9868 commit 5743a9207a370b90f09b20ebd61167c806b937f3
9870 Date: Mon Jul 16 08:53:51 2007 +0200
9872 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
9874 The new function remove_tlb() can be used to remove the TLB's used to
9875 map a specific memory region. This is especially useful for the DDR(2)
9876 setup routines which configure the SDRAM area temporarily as a cached
9877 area (for speedup on auto-calibration and ECC generation) and later
9878 need this area uncached for normal usage.
9882 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
9884 Date: Mon Jul 16 00:31:07 2007 +0200
9886 [PATCH] Support for Xilinx EmacLite controller
9888 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
9890 Date: Sat Jul 14 22:51:02 2007 +0200
9896 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
9898 Date: Sat Jul 14 13:11:28 2007 +0200
9900 [FIX] support for simply measuring time
9902 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
9904 Date: Sat Jul 14 12:41:23 2007 +0200
9906 [FS] Added support for ROMFS
9908 commit 011595307731a7a67a7445d107c279d031e8ab97
9910 Date: Sat Jul 14 01:06:58 2007 +0200
9912 [PCS440EP] - fix compile error, if BUILD_DIR is used
9914 commit 5a2f1098d81ad58b309e5e558d0492643166a799
9916 Date: Sat Jul 14 00:18:48 2007 +0200
9918 [PATCH] Support time without timer
9920 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
9922 Date: Fri Jul 13 21:43:55 2007 +0200
9924 [PATCH] Remove problem with disabled BARREL SHIFTER
9926 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
9928 Date: Fri Jul 13 21:41:44 2007 +0200
9930 [FIX] correct help for rspr
9932 commit fad63407154f46246ce80d53a9c669a44362ac67
9934 Date: Fri Jul 13 09:54:17 2007 +0200
9936 make show_boot_progress () weak.
9940 commit 907902472391b6ca1876ec300687562ecaf459b1
9942 Date: Fri Jul 13 08:26:05 2007 +0200
9944 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
9945 - fix compile error, if BUILD_DIR is used
9949 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
9951 Date: Thu Jul 12 16:32:08 2007 +0200
9953 ppc4xx: Change receive buffer handling in the 4xx emac driver
9955 This change fixes a bug in the receive buffer handling, that
9956 could lead to problems upon high network traffic (broadcasts...).
9960 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
9962 Date: Thu Jul 12 01:45:34 2007 +0200
9964 Update CHANGELOG, minor coding style cleanup.
9968 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
9970 Date: Fri Jun 8 16:41:18 2007 -0500
9972 Remove erroneous errata code from Marvel 88E1111S driver
9974 The Marvel 88E1111S driver for the TSEC was copied from the
9975 88E1101 driver, and included a fix for an erratum which does not
9976 exist on that part. Now it is removed
9980 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
9982 Date: Tue Jun 5 16:38:44 2007 -0500
9986 adds the reset register to 85xx immap
9991 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
9993 Date: Thu May 10 17:50:01 2007 -0500
9995 Polished the 85xx ADS config files
9997 Made the boot commands use device trees by default.
9998 Also moved the ramdisk to 1000000 (I think the previous address
9999 was getting overridden during boot).
10003 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
10005 Date: Wed May 9 11:03:32 2007 -0500
10007 8544ds: Fix Makefile after moving pixis to board/freescale.
10009 The OBJTREE != SRCTREE build scenario was broken.
10015 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
10017 Date: Wed May 9 00:54:20 2007 -0500
10019 tsec: Fix PHY code to match first driver
10021 Jarrold Wen noticed that the generic PHY code always matches
10022 under the current implementation. Change it so the first match
10023 wins, and *only* unknown PHYs trigger the generic driver
10027 commit ccc091aac61a38cd998d575d92f7232e256d6312
10029 Date: Tue May 8 17:27:43 2007 -0500
10031 Add support for CPM device tree configuration to 8560 ADS
10033 * Adds code to modify CPM frequencies
10034 * Cleans up the config file to #define TSEC and (for now) #undef FCC
10035 * Adds the MII command for all 8560 ADS configurations
10036 * Updates config file to provide convenience commands for booting
10042 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
10044 Date: Tue May 8 17:23:02 2007 -0500
10046 Fix Marvell 88e1145 PHY init code
10048 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
10049 where the reset was being done after the errata code instead of
10055 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
10057 Date: Wed Jul 11 14:52:16 2007 -0500
10059 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
10063 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
10065 Date: Wed Jul 11 14:52:08 2007 -0500
10067 pciauto setup bridge
10069 The P2P bridge bus numbers programmed into the device are relative to
10074 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
10076 Date: Wed Jul 11 14:52:01 2007 -0500
10078 Support PCIe extended config registers
10080 FSL PCIe block has extended cfg registers in the 100 and 400 range.
10081 For example, to read the LTSSM register: pci display <busn>.0 404 1
10085 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
10087 Date: Wed Jul 11 14:51:48 2007 -0500
10089 Minor improvements to drivers/pci_auto.c
10091 - Make pciauto_{pre,post}scan_setup_bridge non-static
10092 - Added physical address display in debug messages.
10096 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
10098 Date: Wed Jul 11 14:51:35 2007 -0500
10100 Start pci hose scan from hose->current_busno.
10102 Ensure hose->current_busno is not less than first_busno. This fixes
10103 broken board code which leaves current_busno=0 when first_busno is
10104 greater than 0 for the cases with multiple controllers.
10108 commit 3865b1fb7843a08ad49a6319a36415752276ff48
10110 Date: Wed Jul 11 12:13:53 2007 +0200
10112 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
10116 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
10118 Date: Wed Jul 11 20:11:07 2007 +0200
10120 CM1.QP1: Support for the Schindler CM1.QP1 board.
10125 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
10127 Date: Wed Jul 11 18:39:11 2007 +0200
10129 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
10130 - now the Flash ST M29W040B is supported (not tested)
10131 - fix the "led" command
10132 - fix compile error, if BUILD_DIR is used
10136 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
10138 Date: Sun Jul 8 13:44:27 2007 +0200
10140 Fix malloc problem introduced with the relocation fixup for the PPC platform
10142 The relocation fixup didn't handle the malloc pointer initialization
10143 correctly. This patch fixes this problem. Tested successfully on 4xx.
10144 The relocation fixup patches for 4xx will follow soon.
10148 commit 0dca874db62718e41253659e60f3a1de7eb418ce
10149 Author: TsiChung <tcliew@Goku.(none)>
10150 Date: Tue Jul 10 15:45:43 2007 -0500
10152 Cache update and added CFG_UNIFY_CACHE
10154 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
10156 Signed-off-by: TsiChung <tcliew@Goku.(none)>
10158 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
10160 Date: Thu Jul 5 23:36:16 2007 -0500
10162 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
10164 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
10168 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
10170 Date: Thu Jul 5 23:31:25 2007 -0500
10172 Update header files
10174 Include immap.h and renamed mcfrtc.h to rtc.h
10178 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
10180 Date: Thu Jul 5 23:29:21 2007 -0500
10182 Add mcffec_initialize()
10184 Added mcffec_initialize() in eth_initialize()
10188 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
10190 Date: Thu Jul 5 23:27:40 2007 -0500
10192 Update header file and clean up
10198 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
10200 Date: Thu Jul 5 23:23:15 2007 -0500
10202 New uart structure and defines
10204 Seperated from mcfuart.h
10208 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
10210 Date: Thu Jul 5 23:22:31 2007 -0500
10212 New timer structure and defines
10214 Seperated from mcftimer.h
10218 commit e04acb2eba4782489417240eff76e20e176aec10
10220 Date: Thu Jul 5 23:21:09 2007 -0500
10222 Rename mcfrtc to rtc
10224 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
10228 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
10230 Date: Thu Jul 5 23:17:36 2007 -0500
10232 Rename mcfserial.c. Update include header
10234 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
10238 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
10240 Date: Thu Jul 5 23:13:58 2007 -0500
10242 Header file update, clean up and cache handling
10244 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
10248 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
10250 Date: Thu Jul 5 23:10:40 2007 -0500
10252 Create interrupts.c and modify Makefile
10254 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
10258 commit ddd104f1ed655eda50c06ba636237a83ed943f34
10260 Date: Thu Jul 5 23:06:55 2007 -0500
10266 commit b9bf3de377b2bae70c983c9b97feae914999e735
10268 Date: Thu Jul 5 23:05:31 2007 -0500
10270 Update header file and some clean up
10272 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
10276 commit 84a015b52ec820a5ae173717d78516de731c89c2
10278 Date: Thu Jul 5 23:03:28 2007 -0500
10280 Update header file and enable icache
10282 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
10286 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
10288 Date: Thu Jul 5 23:01:22 2007 -0500
10290 Update header file and removed interrupt_init()
10292 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
10296 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
10298 Date: Thu Jul 5 22:57:46 2007 -0500
10300 Update for flash.o and mii.o
10302 Removed flash.o and added mii.o
10306 commit c5ded275d839e4ff79f41718d50a835d989f57bc
10308 Date: Thu Jul 5 22:56:19 2007 -0500
10310 MII functions calls.
10314 commit 427c814104560e29bda14955c67703245aaaa5b4
10316 Date: Thu Jul 5 22:54:42 2007 -0500
10318 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
10320 The removed MII routines will be placed in mii.c.
10324 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
10326 Date: Thu Jul 5 22:51:05 2007 -0500
10330 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
10334 commit 2744354a8437b8f78db178e30660215688bff570
10336 Date: Thu Jul 5 22:46:38 2007 -0500
10338 Seperate old structure defines and new structure defines
10340 Removed new uart structure and defines to uart.h
10344 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
10346 Date: Thu Jul 5 22:45:01 2007 -0500
10348 Seperate old structure defines and new structure defines
10350 New timer structure and defines will move to new timer.h
10354 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
10356 Date: Thu Jul 5 22:42:23 2007 -0500
10364 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
10366 Date: Thu Jul 5 22:41:24 2007 -0500
10370 Replaced whitespace with tabs
10374 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
10376 Date: Thu Jul 5 22:39:07 2007 -0500
10378 Create new header file and move peripherals base address from configs file to new header file.
10380 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
10384 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
10386 Date: Thu Jul 5 22:24:58 2007 -0500
10390 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
10394 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
10396 Date: Tue Jul 10 11:19:50 2007 -0500
10398 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
10400 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10401 Those always evaluated TRUE, and thus were always compiled
10402 even when IDE really wasn't defined/wanted.
10406 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
10408 Date: Tue Jul 10 11:13:21 2007 -0500
10410 drivers/: Remove lingering references to CFG_CMD_* symbols.
10412 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10413 Those always evaluated TRUE, and thus were always compiled
10414 even when IDE really wasn't defined/wanted.
10418 commit f40a7f3e3888b42a43674b099e5470022c8c544c
10420 Date: Tue Jul 10 11:07:56 2007 -0500
10422 fs/: Remove lingering references to CFG_CMD_* symbols.
10424 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10425 Those always evaluated TRUE, and thus were always compiled
10426 even when IDE really wasn't defined/wanted.
10430 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
10432 Date: Tue Jul 10 11:05:02 2007 -0500
10434 net/: Remove lingering references to CFG_CMD_* symbols.
10436 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10437 Those always evaluated TRUE, and thus were always compiled
10438 even when IDE really wasn't defined/wanted.
10442 commit 902531788376046da212afd1661cffb62f3daa1c
10444 Date: Tue Jul 10 11:02:44 2007 -0500
10446 common/: Remove lingering references to CFG_CMD_* symbols.
10448 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10449 Those always evaluated TRUE, and thus were always compiled
10450 even when IDE really wasn't defined/wanted.
10454 commit d39b57415838c73fb0a37eca84de3c68ba990586
10456 Date: Tue Jul 10 10:48:22 2007 -0500
10458 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
10460 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10461 Those always evaluated TRUE, and thus were always compiled
10462 even when IDE really wasn't defined/wanted.
10466 commit 77a318545d57aefa844752465b94c7e09a3f26d0
10468 Date: Tue Jul 10 10:39:10 2007 -0500
10470 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
10472 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
10473 Those always evaluated TRUE, and thus were always compiled
10474 even when IDE really wasn't defined/wanted.
10478 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
10480 Date: Tue Jul 10 10:27:39 2007 -0500
10482 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
10486 commit 079a136c3588814784561d6e4856970ee82d6e2a
10488 Date: Tue Jul 10 10:12:10 2007 -0500
10490 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
10492 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10493 used to be included but CONFIG_BOOTP_MASK was not defined.
10495 Remove lingering references to CFG_CMD_* symbols.
10499 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
10501 Date: Tue Jul 10 09:38:02 2007 -0500
10503 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
10505 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10506 used to be included but CONFIG_BOOTP_MASK was not defined.
10508 Remove lingering references to CFG_CMD_* symbols.
10512 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
10514 Date: Tue Jul 10 09:29:01 2007 -0500
10516 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
10518 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10519 used to be included but CONFIG_BOOTP_MASK was not defined.
10521 Remove lingering references to CFG_CMD_* symbols.
10525 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
10527 Date: Tue Jul 10 09:22:23 2007 -0500
10529 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
10531 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10532 used to be included but CONFIG_BOOTP_MASK was not defined.
10534 Remove lingering references to CFG_CMD_* symbols.
10538 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
10540 Date: Tue Jul 10 09:10:49 2007 -0500
10542 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
10544 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10545 used to be included but CONFIG_BOOTP_MASK was not defined.
10547 Remove lingering references to CFG_CMD_* symbols.
10551 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
10553 Date: Tue Jul 10 09:02:57 2007 -0500
10555 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
10557 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
10558 used to be included but CONFIG_BOOTP_MASK was not defined.
10560 Remove lingering references to CFG_CMD_* symbols.
10564 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
10566 Date: Mon Jul 9 22:08:34 2007 -0500
10568 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
10570 All of the choices for CONFIG_BOOTP_ are now documented in
10571 the README file. You must now individually select exactly
10572 the set that you want using a series of
10573 #define CONFIG_BOOTP_<x>
10574 statements in the board port config files now.
10578 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
10580 Date: Mon Jul 9 21:57:31 2007 -0500
10582 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10586 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
10588 Date: Mon Jul 9 21:48:26 2007 -0500
10590 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10594 commit 37d4bb70586659dedef1658ce1bed071be098aec
10596 Date: Mon Jul 9 21:38:02 2007 -0500
10598 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10602 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
10604 Date: Mon Jul 9 21:31:24 2007 -0500
10606 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10610 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
10612 Date: Mon Jul 9 21:24:19 2007 -0500
10614 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10618 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
10620 Date: Mon Jul 9 21:16:53 2007 -0500
10622 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
10626 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
10628 Date: Mon Jul 9 19:12:30 2007 -0500
10630 Retire CONFIG_COMMANDS finally.
10631 Strip old CFG_CMD_* symbols out.
10635 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
10637 Date: Mon Jul 9 19:10:03 2007 -0500
10639 Update README.* to reference new CONFIG_CMD_* names now.
10643 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
10645 Date: Mon Jul 9 19:06:00 2007 -0500
10647 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
10651 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
10653 Date: Mon Jul 9 18:57:22 2007 -0500
10655 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
10659 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
10661 Date: Mon Jul 9 18:45:16 2007 -0500
10663 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
10667 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
10669 Date: Mon Jul 9 18:38:39 2007 -0500
10671 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
10675 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
10677 Date: Mon Jul 9 18:31:28 2007 -0500
10679 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
10683 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
10685 Date: Mon Jul 9 18:24:55 2007 -0500
10687 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
10691 commit fcec2eb93e126400009729328e797f12bc94f1fd
10693 Date: Mon Jul 9 18:19:09 2007 -0500
10695 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
10699 commit a593814f2be0c9cdc3133cd550b167b8a988328f
10701 Date: Mon Jul 9 18:10:50 2007 -0500
10703 rtc/: Remove obsolete references to CONFIG_COMMANDS
10707 commit 67350568f9d46e66c21829f3513b3db0caeb948b
10709 Date: Mon Jul 9 18:05:38 2007 -0500
10711 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
10715 commit 7def6b34f910f08d7ef0a14646da067719237ca2
10717 Date: Mon Jul 9 18:02:11 2007 -0500
10719 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
10723 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
10725 Date: Mon Jul 9 17:56:50 2007 -0500
10727 fs/: Remove obsolete references to CONFIG_COMMANDS
10731 commit c91898bbc505aff3e12a807af88e76da18efb7ee
10733 Date: Mon Jul 9 17:46:09 2007 -0500
10735 tools/: Remove obsolete references to CONFIG_COMMANDS
10739 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
10741 Date: Mon Jul 9 17:45:14 2007 -0500
10743 net/: Remove obsolete references to CONFIG_COMMANDS
10747 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
10749 Date: Mon Jul 9 17:39:42 2007 -0500
10751 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
10755 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
10757 Date: Mon Jul 9 17:30:01 2007 -0500
10759 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
10763 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
10765 Date: Mon Jul 9 17:22:37 2007 -0500
10767 disk/: Remove obsolete references to CONFIG_COMMANDS
10771 commit 639221c76c88215bd55af83ad174fc30d1940f8f
10773 Date: Mon Jul 9 17:15:49 2007 -0500
10775 include/: Remove obsolete references to CONFIG_COMMANDS
10776 Mostly removed from comments here.
10780 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
10782 Date: Tue Jul 10 00:01:28 2007 +0200
10784 Coding style cleanup; update CHANGELOG.
10788 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
10790 Date: Mon Jul 9 11:00:24 2007 +0200
10792 Small coding style cleanup
10796 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
10798 Date: Mon Jul 9 10:10:08 2007 +0200
10800 Migrate esd 405EP boards to new NAND subsystem
10802 Remove unused CFG_NAND_LEGACY define
10804 These boards to not have NAND.
10808 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
10810 Date: Mon Jul 9 10:10:06 2007 +0200
10812 Migrate esd 405EP boards to new NAND subsystem
10814 Migrate esd 405EP boards to new NAND subsystem
10817 -use correct io accessors (in/out_be32())
10821 commit e09f7ab5749c345f924da272bea0521a73af5b11
10823 Date: Mon Jul 9 10:10:04 2007 +0200
10825 Migrate esd 405EP boards to new NAND subsystem
10827 This patch prepares the migration from the legacy NAND driver
10828 to U-Boot's new NAND subsystem for esd boards.
10832 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
10834 Date: Sun Jul 8 18:10:08 2007 -0500
10836 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
10840 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
10842 Date: Sun Jul 8 18:05:39 2007 -0500
10844 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
10848 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
10850 Date: Sun Jul 8 18:02:23 2007 -0500
10852 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
10856 commit baa26db4113679b80970ff447d91cc10217742a6
10858 Date: Sun Jul 8 17:51:39 2007 -0500
10860 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
10864 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
10866 Date: Sun Jul 8 17:02:01 2007 -0500
10868 Clear up confusion over the CMD_POST and POST_DIAG mess.
10870 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
10871 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
10872 Clear this mess up some.
10876 commit b3631487105a57ab7cbadfc26efbaf9676275018
10878 Date: Sun Jul 8 15:45:08 2007 -0500
10880 Remove references to the old cmd_confdefs.h include file.
10884 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
10886 Date: Sun Jul 8 15:42:59 2007 -0500
10888 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
10890 Use new CONFIG_CMD_* in lwmon5.h board config file.
10891 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
10895 commit a5562901661bd428f7e5feb333f796372cb81019
10897 Date: Sun Jul 8 15:31:57 2007 -0500
10899 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
10903 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
10905 Date: Sun Jul 8 15:02:44 2007 -0500
10907 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
10911 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
10913 Date: Sun Jul 8 15:12:40 2007 -0500
10915 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
10919 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
10921 Date: Sun Jul 8 14:55:07 2007 -0500
10923 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
10927 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
10929 Date: Sun Jul 8 14:49:44 2007 -0500
10931 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
10935 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
10937 Date: Sun Jul 8 14:21:43 2007 -0500
10939 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
10943 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
10945 Date: Sun Jul 8 14:14:17 2007 -0500
10947 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
10951 commit 348f258f24253433e4a2302a0bbceb6740a67246
10953 Date: Sun Jul 8 13:46:18 2007 -0500
10955 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
10959 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
10961 Date: Sun Jul 8 10:09:35 2007 -0500
10963 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
10967 commit 60a0876b5106b34220e459c208bbf648073306c0
10969 Date: Sat Jul 7 21:04:26 2007 -0500
10971 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
10975 commit dcaa71562826a2466e894c868d132509dcda8444
10977 Date: Sat Jul 7 20:56:05 2007 -0500
10979 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
10983 commit 3c3227f3c737502311b25b72084573901cbbf17d
10985 Date: Sat Jul 7 20:40:43 2007 -0500
10987 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
10991 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
10993 Date: Thu Jul 5 19:52:35 2007 -0500
10995 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
10999 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
11001 Date: Thu Jul 5 19:32:07 2007 -0500
11003 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
11007 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
11009 Date: Thu Jul 5 19:13:52 2007 -0500
11011 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
11013 Since ADS860.h includes "board/fads/fads.h" with ramifications
11014 on the CONFIG_COMMAND treatment, it too has to be adjusted to
11015 exclude already configured commands in this same commit.
11019 commit 10e038932f22ee80ebd53de312531e70e6590a2f
11021 Date: Fri Jul 6 14:58:39 2007 +0200
11023 [NAND] Bad block skipping for command nboot
11025 The old implementation of command nboot does not support reading the image from
11026 NAND flash with skipping of bad blocks. The patch implements a new version of
11027 the nboot command: by calling nboot.jffs2 from the u-boot command line the
11028 command will load the image from NAND flash with respect to bad blocks (by using
11029 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
11035 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
11037 Date: Fri Jul 6 12:26:51 2007 +0200
11039 ppc4xx: Update lwmon5 default environment
11043 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
11045 Date: Fri Jul 6 11:48:24 2007 +0200
11047 ppc4xx: Update lwmon5 board
11049 Add unlock=yes environment variable to default variables to unlock
11050 the CFI flash by default.
11054 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
11056 Date: Fri Jul 6 09:45:47 2007 +0200
11058 Fix problem with get/setdcr commands introduced by cfg patches
11062 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
11064 Date: Fri Jul 6 02:50:19 2007 +0200
11066 Code cleanup and default config update for STC GP3 SSA board.
11070 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
11072 Date: Thu Jul 5 17:56:27 2007 +0200
11074 Fixing some typos etc. introduced mainly by cfg patches.
11078 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
11080 Date: Thu Jul 5 11:12:16 2007 +0200
11082 Minor coding style cleanup. Update CHANGELOG.
11084 commit dca3b3d6d6396b67e5e84af53452164923c73443
11086 Date: Wed Jul 4 22:33:46 2007 -0500
11088 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
11092 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
11094 Date: Wed Jul 4 22:33:38 2007 -0500
11096 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
11100 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
11102 Date: Wed Jul 4 22:33:30 2007 -0500
11104 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
11108 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
11110 Date: Wed Jul 4 22:33:23 2007 -0500
11112 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
11116 commit 26a34560d56a9df5bc2ae23525d9229736134757
11118 Date: Wed Jul 4 22:33:17 2007 -0500
11120 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
11124 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
11126 Date: Wed Jul 4 22:33:13 2007 -0500
11128 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
11132 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
11134 Date: Wed Jul 4 22:33:07 2007 -0500
11136 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
11140 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
11142 Date: Wed Jul 4 22:33:01 2007 -0500
11144 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
11148 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
11150 Date: Wed Jul 4 22:32:57 2007 -0500
11152 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
11156 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
11158 Date: Wed Jul 4 22:32:51 2007 -0500
11160 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
11164 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
11166 Date: Wed Jul 4 22:32:32 2007 -0500
11168 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
11172 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
11174 Date: Wed Jul 4 22:32:25 2007 -0500
11176 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
11180 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
11182 Date: Wed Jul 4 22:32:19 2007 -0500
11184 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
11188 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
11190 Date: Wed Jul 4 22:32:10 2007 -0500
11192 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
11196 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
11198 Date: Wed Jul 4 22:32:03 2007 -0500
11200 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
11204 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
11206 Date: Wed Jul 4 22:31:56 2007 -0500
11208 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
11212 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
11214 Date: Wed Jul 4 22:31:49 2007 -0500
11216 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
11220 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
11222 Date: Wed Jul 4 22:31:42 2007 -0500
11224 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
11228 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
11230 Date: Wed Jul 4 22:31:35 2007 -0500
11232 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
11236 commit d794cfefead5fc177cf4f41164e80382e9c9484a
11238 Date: Wed Jul 4 22:31:15 2007 -0500
11240 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
11244 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
11246 Date: Wed Jul 4 22:31:07 2007 -0500
11248 include/configs: Use new CONFIG_CMD_* in STx board config files.
11252 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
11254 Date: Wed Jul 4 22:30:58 2007 -0500
11256 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
11260 commit 2694690e285acaa34922f55f4b5ae030da60c55a
11262 Date: Wed Jul 4 22:30:50 2007 -0500
11264 include/configs: Use new CONFIG_CMD_* in TQM board config files.
11268 commit 1cc4c458329765b58e584a19821e796b3c10e976
11270 Date: Wed Jul 4 22:30:28 2007 -0500
11272 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
11276 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
11278 Date: Wed Jul 4 22:30:06 2007 -0500
11280 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
11284 commit b44896215a09c60fa40cae906f7ed207bbc2c492
11286 Date: Thu Jul 5 08:17:37 2007 +0200
11288 Merged POST framework with the current TOT.
11292 commit b24629fa377214d63bb40d1360e354b6d3e4af56
11294 Date: Wed Jun 13 13:23:15 2007 -0500
11296 mpc86xx: Remove old CFG_CMD_* references.
11300 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
11302 Date: Wed Jun 13 13:22:54 2007 -0500
11304 Add MPC8568MDS to MAKEALL 85xx target.
11306 It was missing from the original port submission.
11310 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
11312 Date: Wed Jun 13 13:22:08 2007 -0500
11314 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
11318 commit 56b304ac2091689506088a9ae67f63fd6300cf16
11320 Date: Wed Jun 13 13:21:37 2007 -0500
11322 Fix #if typo in CONFIG_CMD_* changes.
11326 commit f780b83316d9af1f61d71cc88b1917b387b9b995
11328 Date: Wed Jun 27 18:11:38 2007 +0200
11330 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
11334 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
11336 Date: Wed Jul 4 10:06:30 2007 +0200
11338 ppc4xx: Update lwmon5 board
11340 - Add optional ECC generation routine to preserve existing
11341 RAM values. This is needed for the Linux log-buffer support
11342 - Add optional DDR2 setup with CL=4
11343 - GPIO50 not used anymore
11344 - Lime register setup added
11348 commit 6810a34677dbc446334f5e451f1682426dd33b49
11350 Date: Tue Jul 3 00:17:28 2007 -0600
11352 Fix Makefile to use $(MKCONFIG) macro for all board ports
11356 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
11358 Date: Tue Jul 3 00:17:28 2007 -0600
11360 Fix Makefile to use $(MKCONFIG) macro for all board ports
11364 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
11366 Date: Tue Jul 3 00:34:49 2007 -0600
11368 Correct fixup relocation for mpc83xx
11372 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
11374 Date: Tue Jul 3 00:34:44 2007 -0600
11376 Correct fixup relocation for mpc8260
11380 commit f3a52fe05923935db86985daf9438e2f70ac39aa
11382 Date: Tue Jul 3 00:34:39 2007 -0600
11384 Correct fixup relocation for mpc824x
11388 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
11390 Date: Tue Jul 3 00:34:34 2007 -0600
11392 Correct fixup relocation for mpc8220
11396 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
11398 Date: Tue Jul 3 00:34:29 2007 -0600
11400 Correct fixup relocation for MPC5xxx
11404 commit 3649cd99ba815b6601868735765602f00ef3692b
11406 Date: Tue Jul 3 00:34:24 2007 -0600
11408 Correct relocation fixup for mpc5xx
11412 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
11414 Date: Tue Jul 3 00:34:19 2007 -0600
11416 Don't set gd->reloc_off if relocation of .fixup works correctly
11420 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
11422 Date: Tue Jul 3 00:34:14 2007 -0600
11424 Remove obsolete mpc83xx linker scripts
11428 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
11430 Date: Tue Jul 3 00:34:09 2007 -0600
11432 Consolidate mpc8260 linker scripts
11436 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
11438 Date: Tue Jul 3 00:34:04 2007 -0600
11440 Remove obsolete mpc824x linker scripts
11444 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
11446 Date: Tue Jul 3 00:33:59 2007 -0600
11448 Remove obsolete mpc824x linker scripts (3 of 4)
11452 commit a71c084f3ac7fedf144537db2b2da47323068833
11454 Date: Tue Jul 3 00:33:53 2007 -0600
11456 Remove obsolete mpc824x linker scripts (2 of 4)
11460 commit f670a15468d1365241d40022b9408e1004181f5e
11462 Date: Tue Jul 3 00:33:48 2007 -0600
11464 Remove obsolete mpc824x linker scripts (1 of 4)
11468 commit 09555bd45a04c0e54f172528d21bc18896550d28
11470 Date: Tue Jul 3 00:33:43 2007 -0600
11472 Remove obsolete mpc8220 linker scripts
11476 commit 5efb992f046e51225c93d52f80fecbe433abd789
11478 Date: Tue Jul 3 00:33:38 2007 -0600
11480 Remove obsolete mpc5xxx linker scripts (3 of 3)
11484 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
11486 Date: Tue Jul 3 00:33:33 2007 -0600
11488 Remove obsolete mpc5xxx linker scripts (2 of 3)
11492 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
11494 Date: Tue Jul 3 00:33:28 2007 -0600
11496 Remove obsolete mpc5xxx linker scripts (1 of 3)
11500 commit b7d8e05f8675249b5f208aa73babeed384a4519d
11502 Date: Tue Jul 3 00:33:23 2007 -0600
11504 Remove obsolete mpc5xx linker scripts
11508 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
11510 Date: Tue Jul 3 00:33:18 2007 -0600
11512 Consolidate mpc83xx linker scripts
11516 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
11518 Date: Tue Jul 3 00:33:13 2007 -0600
11520 Consolidate mpc8260 linker scripts
11524 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
11526 Date: Tue Jul 3 00:33:08 2007 -0600
11528 Consolidate mpc824x linker scripts
11532 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
11534 Date: Tue Jul 3 00:33:03 2007 -0600
11536 Consolidate mpc8220 linker scripts
11540 commit d181c9a15cd41863fe24840d17848429f27d3c8c
11542 Date: Tue Jul 3 00:32:58 2007 -0600
11544 Consolidate mpc5xxx linker scripts
11548 commit 287ac924adb7291bebe5086652a362a30ab28b13
11550 Date: Tue Jul 3 00:32:53 2007 -0600
11552 Consolidate mpc5xx linker scripts
11556 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
11558 Date: Wed Jul 4 00:43:53 2007 +0200
11560 Fix a few file permission problems.
11564 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
11566 Date: Wed Jul 4 00:38:38 2007 +0200
11568 Minor coding style cleanup. Rebuild CHANGELOG file.
11570 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
11572 Date: Mon Jun 11 19:03:44 2007 -0500
11574 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
11578 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
11580 Date: Mon Jun 11 19:03:39 2007 -0500
11582 README: Rewrite command line config to use CONFIG_CMD_* names.
11586 commit 72a074cec68e5bad60d63206c050974e08afd804
11588 Date: Mon Jun 11 19:03:34 2007 -0500
11590 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11592 This is a compatibility step that allows both the older form
11593 and the new form to co-exist for a while until the older can
11594 be removed entirely.
11596 All transformations are of the form:
11598 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11600 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11604 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
11606 Date: Mon Jun 11 19:03:28 2007 -0500
11608 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11610 This is a compatibility step that allows both the older form
11611 and the new form to co-exist for a while until the older can
11612 be removed entirely.
11614 All transformations are of the form:
11616 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11618 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11622 commit 9107ebe0d352420895ab69b715697bdebc8caf50
11624 Date: Mon Jun 11 19:03:23 2007 -0500
11626 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11628 This is a compatibility step that allows both the older form
11629 and the new form to co-exist for a while until the older can
11630 be removed entirely.
11632 All transformations are of the form:
11634 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11636 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11640 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
11642 Date: Mon Jun 11 19:03:19 2007 -0500
11644 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11646 This is a compatibility step that allows both the older form
11647 and the new form to co-exist for a while until the older can
11648 be removed entirely.
11650 All transformations are of the form:
11652 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11654 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11658 commit 737184114ec9c9e0ab94d6713536126073bd2472
11660 Date: Mon Jun 11 19:03:15 2007 -0500
11662 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11664 This is a compatibility step that allows both the older form
11665 and the new form to co-exist for a while until the older can
11666 be removed entirely.
11668 All transformations are of the form:
11670 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11672 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11676 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
11678 Date: Mon Jun 11 19:03:08 2007 -0500
11680 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11682 This is a compatibility step that allows both the older form
11683 and the new form to co-exist for a while until the older can
11684 be removed entirely.
11686 All transformations are of the form:
11688 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11690 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11694 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
11696 Date: Mon Jun 11 19:03:03 2007 -0500
11698 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11700 This is a compatibility step that allows both the older form
11701 and the new form to co-exist for a while until the older can
11702 be removed entirely.
11704 All transformations are of the form:
11706 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11708 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11712 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
11714 Date: Mon Jun 11 19:02:58 2007 -0500
11716 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11718 This is a compatibility step that allows both the older form
11719 and the new form to co-exist for a while until the older can
11720 be removed entirely.
11722 All transformations are of the form:
11724 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11726 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11730 commit 98b79003c21c2578206003256de4e781d6b36ca8
11732 Date: Mon Jun 11 19:02:53 2007 -0500
11734 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11736 This is a compatibility step that allows both the older form
11737 and the new form to co-exist for a while until the older can
11738 be removed entirely.
11740 All transformations are of the form:
11742 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11744 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11748 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
11750 Date: Mon Jun 11 19:02:49 2007 -0500
11752 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11754 This is a compatibility step that allows both the older form
11755 and the new form to co-exist for a while until the older can
11756 be removed entirely.
11758 All transformations are of the form:
11760 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11762 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11766 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
11768 Date: Mon Jun 11 19:02:34 2007 -0500
11770 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11772 This is a compatibility step that allows both the older form
11773 and the new form to co-exist for a while until the older can
11774 be removed entirely.
11776 All transformations are of the form:
11778 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11780 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11784 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
11786 Date: Mon Jun 11 19:02:20 2007 -0500
11788 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11790 This is a compatibility step that allows both the older form
11791 and the new form to co-exist for a while until the older can
11792 be removed entirely.
11794 All transformations are of the form:
11796 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11798 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11802 commit d5be43de93ff905c465e509d45a3164ef48d26e7
11804 Date: Mon Jun 11 19:02:10 2007 -0500
11806 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11808 This is a compatibility step that allows both the older form
11809 and the new form to co-exist for a while until the older can
11810 be removed entirely.
11812 All transformations are of the form:
11814 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11816 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11820 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
11822 Date: Mon Jun 11 19:02:05 2007 -0500
11824 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11826 This is a compatibility step that allows both the older form
11827 and the new form to co-exist for a while until the older can
11828 be removed entirely.
11830 All transformations are of the form:
11832 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11834 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11838 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
11840 Date: Mon Jun 11 19:01:54 2007 -0500
11842 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11844 This is a compatibility step that allows both the older form
11845 and the new form to co-exist for a while until the older can
11846 be removed entirely.
11848 All transformations are of the form:
11850 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11852 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11856 commit a76adc8142c1d956385a109e0b70f9319ede4d66
11858 Date: Mon Jun 11 19:01:43 2007 -0500
11860 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
11862 This is a compatibility step that allows both the older form
11863 and the new form to co-exist for a while until the older can
11864 be removed entirely.
11866 All transformations are of the form:
11868 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
11870 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
11874 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
11876 Date: Mon Jun 11 19:01:34 2007 -0500
11878 Introduce initial versions of new Command Config files.
11880 Derive three new files from cmd_confdefs.h:
11881 config_bootp.h - Has BOOTP related config options, not commands
11882 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
11883 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
11885 For now, include "config_bootp.h" for compatability until all
11886 users of it directly include it properly.
11890 commit 1f2a05898658900dc5717761e27abf2052e67e13
11892 Date: Sat Jun 30 18:50:48 2007 +0200
11898 commit a5d71e290f3673269be8eefb4ec44f53412f9461
11900 Date: Mon Jun 25 19:11:37 2007 +0200
11902 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
11906 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
11908 Date: Mon Jun 25 17:03:13 2007 +0200
11910 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
11912 This patch prints the DDR status registers upon machine check
11913 interrupt on the 440EPx/GRx. This can be useful especially when
11914 ECC support is enabled.
11916 I added some small changes to the original patch from Niklaus to
11917 make it compile clean.
11922 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
11924 Date: Mon Jun 25 16:50:55 2007 +0200
11926 ppc4xx: Fix O=buildir builds
11928 This patch fixes the problem to assemble cpu/ppc4xx/start.S
11929 experienced last week where building failed having specified
11930 O=../build.sequoia.
11934 commit 466fff1a7bb5fe764a06450626f6098219f446b8
11936 Date: Mon Jun 25 15:57:39 2007 +0200
11938 ppc4xx: Add pci_pre_init() for 405 boards
11940 This patch removes the CFG_PCI_PRE_INIT option completely, since
11941 it's not needed anymore with the patch from Matthias Fuchs with
11942 the "weak" pci_pre_init() implementation.
11946 commit 6f35c53166213c24a5a0e2390ed861136ff73870
11948 Date: Sun Jun 24 17:41:21 2007 +0200
11950 ppc4xx: Maintenance patch for esd's CPCI405 derivats
11952 -add pci_pre_init() for pci interrupt fixup code
11953 -disable phy sleep mode via reset_phy() function
11954 -use correct io accessors
11959 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
11961 Date: Sun Jun 24 17:23:41 2007 +0200
11963 ppc4xx: Add pci_pre_init() for 405 boards
11965 This patch adds support for calling a plattform dependant
11966 pci_pre_init() function for 405 boards. This can be used to
11967 move the current pci_405gp_fixup_irq() function into the
11970 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
11971 A default function with 'weak' attribute is used when
11972 a board specific pci_pre_init() is not implemented.
11976 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
11978 Date: Fri Jun 22 23:59:00 2007 +0200
11980 Coding stylke cleanup; rebuild CHANGELOG
11982 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
11984 Date: Wed Apr 18 14:55:19 2007 +0400
11986 Adapt log buffer code to support Linux 2.6
11988 A new environment variable, "logversion", selects the log buffer
11989 behaviour. If it is not set or set to a value other than 2, then the
11990 old, Linux 2.4.4, behaviour is selected.
11995 commit a11e06965ec91270c51853407ff1261d3c740386
11997 Date: Wed Mar 28 19:06:19 2007 +0400
11999 Extend POST support for PPC440
12001 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
12006 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
12008 Date: Fri Jun 22 19:11:54 2007 +0200
12010 [PCS440EP] upgrade the PCS440EP board:
12011 - Show on the Status LEDs, some States of the board.
12012 - Get the MAC addresses from the EEProm
12014 - use the CF on the board.
12015 - check the U-Boot image in the Flash with a SHA1
12017 - use dynamic TLB entries generation for the SDRAM
12021 commit 3a1f5c81b0b9557817a789bece839905581c2205
12023 Date: Fri Jun 22 16:58:40 2007 +0200
12025 ppc4xx: Fix problem with extended program_tlb() funtion
12027 The recently extended program_tlb() function had a problem when
12028 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
12029 virtual address was not incremented. This patch fixes this issue
12030 and is tested on Katmai with 512MB SDRAM.
12034 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
12036 Date: Fri Jun 22 14:58:04 2007 +0200
12038 [ppc] Fix build breakage for all non-4xx PowerPC variants.
12040 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
12041 - minor 4xx cleanup
12043 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
12045 Date: Fri Jun 22 10:34:12 2007 +0200
12047 [patch] add nand_init() prototype to nand.h
12049 since nand_init() is expected to be called by other parts of u-boot, there
12050 should be a prototype for it in nand.h
12055 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
12057 Date: Wed Jun 20 18:14:24 2007 +0200
12059 Coding style cleanup. Refresh CHANGELOG.
12061 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
12063 Date: Tue Jun 19 17:22:44 2007 +0200
12065 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
12067 This patch adds a board command to configure the I2C bootstrap EEPROM
12068 values. Right now 533 and 667MHz are supported for booting either via NOR
12069 or NAND FLASH. Here the usage:
12071 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
12072 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
12076 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
12078 Date: Tue Jun 19 16:42:31 2007 +0200
12080 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
12082 The latest changes showed a problem with the location of the NAND-SPL
12083 image in the OCM and the init-data area (incl. cache). This patch
12084 fixes this problem.
12088 commit 86ba99e34194394052d24c04dc40d1263d29a26f
12090 Date: Tue Jun 19 16:40:58 2007 +0200
12092 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
12096 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
12098 Date: Mon Jun 18 13:50:13 2007 -0500
12100 Added M5329AFEE and M5329BFEE Platforms
12102 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
12103 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
12104 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
12107 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
12108 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
12109 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
12110 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
12111 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
12112 lib_m68k/time.c, net/eth.c and rtc/Makefile
12116 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
12118 Date: Sun Jun 17 19:04:11 2007 +0200
12120 [fix] email reparation
12122 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
12124 Date: Sun Jun 17 19:03:21 2007 +0200
12126 [FIX] fix microblaze file permitission
12128 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
12130 Date: Fri Jun 15 11:33:41 2007 +0200
12132 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
12134 Now CONFIG_440 has to be defined in all PPC440 board config files.
12138 commit efa35cf12d914d4caba942acd5a6c45f217de302
12140 Date: Fri Jun 15 11:19:28 2007 +0200
12142 ppc4xx: Clean up 440 exceptions handling
12144 - Introduced dedicated switches for building 440 and 405 images required
12145 for 440-specific machine instructions like 'rfmci' etc.
12147 - Exception vectors moved to the proper location (_start moved away from
12148 the critical exception handler space, which it occupied)
12150 - CriticalInput now serviced (with default handler)
12152 - MachineCheck properly serviced (added a dedicated handler and return
12155 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
12156 unhandled and those not relevant for 4xx were eliminated)
12158 - Eliminated Linux leftovers, removed dead code
12164 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
12166 Date: Fri Jun 15 08:18:01 2007 +0200
12168 [ppc4xx] Add initial lwmon5 board support
12170 This patch adds initial support for the Liebherr lwmon5 board euqipped
12171 with an AMCC 440EPx PowerPC.
12175 commit 85f737376d5ff3d5f0d45a8b657686326d175307
12177 Date: Fri Jun 15 07:39:43 2007 +0200
12179 [ppc4xx] Extend 44x GPIO setup with default output state
12181 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
12182 is extended with the default GPIO output state (level).
12186 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
12188 Date: Thu Jun 14 11:14:32 2007 +0200
12190 [ppc4xx] Extend program_tlb() with virtual & physical addresses
12192 Now program_tlb() allows to program a TLB (or multiple) with
12193 different virtual and physical addresses. With this change, now one
12194 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
12195 diabled and once with caches enabled.
12199 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
12201 Date: Wed May 23 19:02:41 2007 +0200
12203 Change 'repeatable' attribute of some commands to sensible values.
12205 Most prominently this changes 'erase' to be non-repeatable.
12209 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
12211 Date: Wed May 23 18:47:48 2007 +0200
12213 Fix 'run' not to continue after interrupted command
12217 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
12219 Date: Mon Jun 11 15:14:24 2007 +0200
12221 USB: This patch fix readl in ohci swap reg access.
12225 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
12227 Date: Fri Jun 8 14:52:22 2007 +0200
12229 TQM5200: Add Flat Device Tree support, update default env. accordingly.
12234 commit 9045f33c023f698660a2e45d1b2194c0711abebc
12236 Date: Fri Jun 8 10:24:58 2007 +0200
12238 Fix config problems on SC3 board; make ide_reset_timeout work.
12240 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
12242 Date: Fri Jun 8 09:55:24 2007 +0200
12244 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
12246 Set the correct value in GPIOx_TCR when configuring the gpio
12247 with CFG_440_GPIO_TABLE.
12252 commit f539edc076cfe52bff919dd512ba8d7af0e22092
12254 Date: Thu May 24 15:52:25 2007 -0700
12256 cosmetic changes to bcm570x driver
12258 This is a cosmetic only changes submission.
12259 It affects files relevant to bcm570x driver.
12260 the commands used to generate this change was
12263 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
12265 The BMW target (the only one using this chip so far) builds cleanly, the
12266 `before and after' generated object files for drivers/bcm570x.c and
12267 drivers/tigon3.o are identical as reported by objdump -d
12272 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
12274 Date: Wed Jun 6 16:26:56 2007 +0200
12276 Coding Style cleanup; generate new CHANGELOG file.
12280 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
12282 Date: Wed Jun 6 11:49:44 2007 +0200
12284 TRAB, USB: update trab board configuration for use of generic ohci driver
12286 commit dace45acd1c1357daa9322099d07c9a9e08b0024
12288 Date: Wed Jun 6 11:49:43 2007 +0200
12290 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
12292 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
12294 Date: Wed Jun 6 11:49:43 2007 +0200
12296 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
12298 commit fc43be478f2aa37ce38acd85355038866e4162af
12300 Date: Wed Jun 6 11:49:35 2007 +0200
12302 USB/OHCI: endianness cleanup in the generic ohci driver
12304 commit c440bfe6d6d92d66478a7e84402b31f48413617b
12306 Date: Wed Jun 6 11:42:13 2007 +0200
12308 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
12310 This patch adds NAND booting support for the AMCC Acadia eval board.
12312 Please make sure to configure jumper J7 to position 2-3 when booting
12313 from NOR, and to position 1-2 when booting for NAND.
12315 I also added a board command to configure the I2C bootstrap EEPROM
12316 values. Right now only 267MHz is support for booting either via NOR
12317 or NAND FLASH. Here the usage:
12319 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
12320 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
12324 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
12326 Date: Wed Jun 6 10:08:14 2007 +0200
12328 Files include/linux/byteorder/{big,little}_endian.h define
12329 __BIG_ENDIAN and __LITTLE_ENDIAN.
12333 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
12335 Date: Wed Jun 6 10:08:14 2007 +0200
12337 Add USB PCI-OHCI, USB keyboard and event poll support to the
12338 MPC8641HPCN board config file.
12342 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
12344 Date: Wed Jun 6 10:08:14 2007 +0200
12346 USB PCI-OHCI, interrupt pipe and usb event poll support
12348 This patch added USB PCI-OHCI chips support, interrupt pipe support
12349 and usb event poll support. For supporting the USB interrupt pipe, the
12350 globe urb_priv is moved to purb in ed struct. Now, we can process
12351 several urbs at one time. The interrupt pipe support codes are ported
12352 from Linux kernel 2.4.
12356 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
12358 Date: Wed Jun 6 10:08:13 2007 +0200
12360 USB event poll support
12362 This patch adds USB event poll support, which could be used in usbkbd
12363 and other usb devices driver when the asynchronous interrupt
12364 processing is supported.
12368 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
12370 Date: Wed Jun 6 10:08:12 2007 +0200
12372 ISP116x: delay for crappy USB keys
12374 Using some (very) slow USB keys cause the USB host controller buffers
12375 are not ready to be read by the CPU so we need an extra delay before
12376 reading the USB storage data.
12380 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
12382 Date: Wed Jun 6 10:08:12 2007 +0200
12384 Change duplicate usb_cpu_init_fail to usb_board_init_fail
12391 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
12393 Date: Tue Jun 5 12:30:52 2007 -0500
12395 mpc8641 image size cleanup
12397 e600 does not have a bootpg restriction.
12398 Move the version string to beginning of image at fff00000.
12399 Resetvec.S is not needed.
12400 Update flash copy instructions.
12401 Add tftpflash env variable
12406 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
12408 Date: Mon Jun 4 08:36:05 2007 +0200
12410 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
12412 The attached patch is mainly cosmetic, allowing u-boot to
12413 display the correct bootstrap option letter according to the
12416 The original patch was extended with 405EZ support by Stefan
12422 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
12424 Date: Wed May 23 12:45:19 2007 +0400
12426 fix compilation problem for mpc8349itx CFG_RAMBOOT
12428 Current include/configs/MPC8349ITX.h does contain some support for building
12429 image that will be started from memory (without putting in into flash).
12430 It could be triggered by building with TEXT_BASE set to a low value.
12432 However, this support is incomplete: using of low TEXT_BASE causes
12433 defining configuration macros in inconsistent way, which later leads
12434 to compilation errors. In particular. flash support is being disabled,
12435 but then flash structures get referenced.
12437 This patch fixes this, making it possible to build with low TEXT_BASE.
12443 commit 8a364f0970de49949d635e60accf463c6443ef8c
12445 Date: Wed May 23 12:45:25 2007 +0400
12447 add missing 'console' var to default mpc8349itx config
12451 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
12453 Date: Fri Jun 1 16:18:17 2007 +0200
12455 ppc4xx: Add missing file for Bamboo NAND booting support
12459 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
12461 Date: Fri Jun 1 15:58:19 2007 +0200
12463 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
12465 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
12466 suggested by AMCC it is not recommended to dynamically change the EBC
12467 speed after bootup. So we undo this change to be on the safe side.
12471 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
12473 Date: Fri Jun 1 15:29:04 2007 +0200
12475 ppc4xx: Update Sequoia NAND booting support with ECC
12479 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
12481 Date: Fri Jun 1 15:27:11 2007 +0200
12483 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
12485 This patch adds NAND booting support for the AMCC Bamboo eval board.
12486 Since the NAND-SPL boot image is limited to 4kbytes, this version
12487 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
12488 supported, since the setup code for I2C DIMM autodetection and
12489 configuration is too big for this NAND bootloader.
12493 commit 42be56f53c8b107868e6125c8524ae84293e95a7
12495 Date: Fri Jun 1 15:23:04 2007 +0200
12497 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
12499 The U-Boot NAND booting support is now extended to support ECC
12500 upon loading of the NAND U-Boot image.
12502 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
12506 commit a471db07fbb65a841ffc9f4f112562b945230f98
12508 Date: Fri Jun 1 15:19:29 2007 +0200
12510 ppc4xx: Prepare Bamboo port for NAND booting support
12512 This patch updates the "normal" Bamboo NOR booting port, so
12513 that it is compatible with the coming soon NAND booting
12516 It also enables the 2nd NAND flash on the Bamboo.
12520 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
12522 Date: Fri Jun 1 15:16:58 2007 +0200
12524 ppc4xx: Update in_be32() functions and friends to latest Linux version
12528 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
12530 Date: Fri Jun 1 15:15:12 2007 +0200
12532 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
12534 This patch adds hardware ECC support to the NDFC driver. It also
12535 changes the register access from using the "simple" in32/out32
12536 functions to the in_be32/out_be32 functions, which make sure
12537 that the access is correctly synced. This is the only recommended
12538 access to SoC registers in the current Linux kernel.
12542 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
12544 Date: Fri Jun 1 15:12:15 2007 +0200
12546 NAND: Update nand_ecc.c to latest Linux version
12548 This patch updates the nand_ecc code to the latest Linux version.
12549 The main reason for this is the more compact code. This makes
12550 it possible to include the ECC code into the NAND bootloader
12551 image (NAND_SPL) for PPC4xx.
12555 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
12557 Date: Fri Jun 1 15:09:50 2007 +0200
12559 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
12563 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
12565 Date: Fri Jun 1 13:45:24 2007 +0200
12567 ppc4xx: Change Luan config file to support ECC
12569 With the updated 44x DDR2 driver the Luan board now supports
12570 ECC generation and checking.
12574 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
12576 Date: Fri Jun 1 13:45:00 2007 +0200
12578 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
12580 Add config option for 180 degree advance clock control as needed
12581 for the AMCC Luan eval board.
12585 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
12587 Date: Thu May 31 17:20:09 2007 +0200
12589 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
12593 commit 7049288fb1f16f1b317140226cdebd07bd416395
12595 Date: Sun May 27 17:26:46 2007 +0200
12597 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
12601 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
12603 Date: Sun May 27 17:06:36 2007 +0200
12605 Motion-PRO: Add support for redundant environment.
12607 Enable redundant environment, add a MTD partition for it; also add env.
12608 variable command for passing MTD partitions to the kernel command line.
12613 commit a26eabeec31746f06d309103690892805696e344
12615 Date: Sun May 27 17:05:11 2007 +0200
12617 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
12619 Allow passing longer command line to the kernel - useful especially
12620 for passing MTD partition layout.
12625 commit 9160b96f71483a116de81c68985e8ee306d36764
12627 Date: Sun May 27 17:04:18 2007 +0200
12629 Fix: Add missing NULL termination in strings expanded by macros parser.
12634 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
12636 Date: Sun May 27 17:03:37 2007 +0200
12638 Motion-PRO: Update EEPROM's page write bits and write delay.
12640 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
12641 have a page write capability of two bytes", and "This device offers fast (1ms)
12642 byte write". Add 3ms of extra delay.
12647 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
12649 Date: Sun May 27 16:58:45 2007 +0200
12651 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
12653 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
12654 networking does not function. This commit switches PHY to TX mode by clearing
12655 the FX_SEL bit of Mode Control Register. It also reverses commit
12656 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
12661 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
12663 Date: Sun May 27 16:57:15 2007 +0200
12665 Motion-PRO: Add support for the temperature sensor.
12670 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
12672 Date: Sun May 27 16:55:23 2007 +0200
12674 Motion-PRO: Add displaying of CPLD revision information during boot.
12679 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
12681 Date: Sun May 27 16:53:43 2007 +0200
12683 MPC5xxx: Change names of defines related to IPB and PCI clocks.
12685 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
12686 them does not cause PCI or IPB clocks to run at the specified speed.
12687 Instead, they configure divisors used to calculate said clocks. This
12688 patch renames the defines according to their real function.
12693 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
12695 Date: Sun May 27 16:51:48 2007 +0200
12697 Motion-PRO: Add LED support.
12703 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
12705 Date: Thu May 24 12:12:47 2007 +0200
12707 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
12713 commit d756894722c888d09a9fa1df8323753772d3dcce
12715 Date: Thu May 24 09:49:00 2007 +0200
12717 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
12720 fixes a small bug in the 405EZ OCM initialization. Thanks for
12725 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
12727 Date: Thu May 24 08:22:09 2007 +0200
12729 ppc4xx: Update AMCC Acadia support for board revision 1.1
12731 This patch updates the Acadia (405EZ) support for the new 1.1 board
12732 revision. It also adds support for NAND FLASH via the 4xx NDFC.
12734 Please note that the jumper J7 must be in position 2-3 for this
12735 NAND support. Position 1-2 is for NAND booting only. NAND booting
12736 support will follow later.
12740 commit 822d55365bb557e084d0e33625a6dedcc866110b
12742 Date: Wed May 23 14:09:46 2007 -0500
12744 Add LIST_86xx MAKEALL target for PowerPC builds.
12748 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
12750 Date: Tue May 22 12:48:09 2007 +0200
12752 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
12756 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
12758 Date: Tue May 22 12:46:10 2007 +0200
12760 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
12762 This patch adds support for 405 PPC's to the 4xx NAND driver
12763 ndfc.c. This is in preparation for the new AMCC 405EZ.
12767 commit 10603d76767426be803dadd4fb688b97eb69481c
12769 Date: Mon May 21 07:41:22 2007 +0200
12771 ppc4xx: Fix problem in 405EZ OCM initialization
12773 As spotted by Bruce Adler this patch fixes an initialization problem
12778 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
12780 Date: Fri May 18 16:47:03 2007 +0100
12782 Reduce line lengths to 80 characters max.
12784 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
12786 Date: Fri May 18 14:34:07 2007 +0100
12788 Makefile permissions
12790 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
12792 Date: Fri May 18 14:33:11 2007 +0100
12794 Makefile permissions
12796 commit 255a3577c848706441daee0174543efe205a77f8
12798 Date: Wed May 16 16:52:19 2007 -0500
12800 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
12802 For all practical u-boot purposes, TSECs don't differ throughout the
12803 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
12807 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
12809 Date: Wed May 16 14:49:12 2007 +0200
12811 Fix compile problem cause my Microblaze merge
12815 commit ada4697d0230d6da552867777f98a67ec3ba2579
12817 Date: Wed May 16 13:23:10 2007 +0200
12819 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
12821 Because the Sequoia board does not boot with an EBC faster than 66MHz,
12822 the clock divider are changed after the initial boot process.
12824 This allows for maximum clocking speeds to be achieved on newer boards.
12825 Sequoia boards with 666.66 MHz processors require that the EBC divider
12826 be set to 3 in order to start the initial boot process at a slower EBC
12827 speed. After the initial boot process, the divider can be set back to 2,
12828 which will cause the boards to run at 83.333MHz. This is backward
12829 compatible with boards with 533.33 MHz processors, as these boards will
12830 already be set with an EBC divider of 2.
12834 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
12836 Date: Wed May 16 01:16:53 2007 +0200
12838 Minor Coding Style cleanup, update CHANGELOG.
12842 commit d62f64cc23a940eafe712c776b3249e4160753d1
12844 Date: Wed May 16 00:13:33 2007 +0200
12846 Coding Style Cleanup, new CHANGELOG
12848 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
12850 Date: Tue May 15 23:38:05 2007 +0200
12852 Minor coding style cleanup.
12854 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
12856 Date: Fri Apr 20 14:23:02 2007 +0530
12858 Add driver for S-ATA-controller on Intel processors with South
12859 Bridge, ICH-5, ICH-6 and ICH-7.
12863 1. Code is divided in to two files. All functions, which are
12864 controller specific are kept in "drivers/ata_piix.c" file and
12865 functions, which are not controller specific, are kept in
12866 "common/cmd_sata.c" file.
12868 2. Reading and Writing from the S-ATA drive is done using PIO method.
12870 3. Driver can be configured for 48-bit addressing by defining macro
12871 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
12874 4. S-ATA read function is hooked to the File system, commands like
12875 ext2ls and ext2load file can be used. This has been tested.
12877 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
12878 controller and identifies the S-ATA drives connected to it.
12880 6. U-Boot command "sata" is added, which is used to read/write, print
12881 partition table and get info about the drives present. This I have
12882 implemented in same way as "ide" command is implemented in U-Boot.
12884 7. This driver is for S-ATA in native mode.
12886 8. This driver does not support the Native command queuing and
12891 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
12893 Date: Mon Apr 30 15:57:22 2007 +0530
12895 Fixes bug clearing the bss section for i386
12898 There is a bug in the code of clearing the bss section for processor
12899 i386.(File: cpu/i386/start.S)
12900 In the code, bss_start addr (starting addr of bss section) is put into
12901 the register %eax, but the code which clears the bss section refers to
12902 the addr pointed by %edi.
12904 This patch fixes this bug by putting bss_start into %edi register.
12908 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
12910 Date: Mon Apr 30 16:47:28 2007 -0500
12912 Add support for BCM5464 Quad Phy
12914 Added support for Broadcom's BCM5464 Quad Phy
12918 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
12920 Date: Wed May 9 08:10:57 2007 +0800
12922 Search the exception table with linear algorithm
12924 Search the exception table with linear algorithm instead of
12925 bisecting algorithm.
12926 Because the exception table might be unsorted.
12930 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
12932 Date: Mon May 14 11:47:35 2007 +0800
12934 Fix compilation issues on MACOSX
12939 commit 56fd7162985c412317bbf763a225fba23c64fd31
12941 Date: Tue May 15 07:55:42 2007 -0700
12943 Fix for compile of JSE target
12945 The attached patch fixes the compile of the JSE board in the
12946 denx git as of 14 may 2007. It is an extremely simple patch,
12947 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
12949 Fix to compile JSE against 20070514 git of u-boot
12951 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
12952 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
12953 Date: Sun May 13 21:01:03 2007 +0900
12955 sh: MS7750SE support.
12957 This adds support for the Hitachi MS7750SE.
12961 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
12962 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
12963 Date: Sun May 13 20:58:00 2007 +0900
12965 sh: First support code of SuperH.
12969 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
12971 Date: Fri May 11 12:01:49 2007 +0200
12973 ppc4xx: Add mtcpr/mfcpr access macros
12977 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
12979 Date: Fri May 11 12:01:06 2007 +0200
12981 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
12985 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
12987 Date: Thu May 10 16:55:52 2007 +0200
12989 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
12992 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
12994 Date: Wed May 9 11:42:44 2007 +0100
12996 Add the board directory for SMN42
12998 commit 160131bf965785419626df6c388729fe0b597992
13000 Date: Wed May 9 11:41:58 2007 +0100
13002 Add the files for the SMN42 board
13004 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
13006 Date: Wed May 9 11:40:34 2007 +0100
13008 Remove the deleted files for the SMN42 patch
13010 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
13012 Date: Wed May 9 11:37:56 2007 +0100
13014 New board SMN42 branch
13016 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
13018 Date: Wed May 9 10:24:38 2007 +0100
13020 Makefile permissions
13022 commit b84289b595731e8851df46e893845cc1322c9b9b
13024 Date: Tue May 8 14:17:07 2007 -0500
13026 8641hpcn: Fix Makefile after moving pixis to board/freescale.
13028 The OBJTREE != SRCTREE build scenario was broken.
13034 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
13036 Date: Tue May 8 15:57:43 2007 +0200
13038 add: reading special purpose registers
13040 commit 1a50f164beb065f360fbddb76029607d6b099698
13042 Date: Tue May 8 14:52:52 2007 +0200
13044 add: Microblaze V5 exception handling
13046 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
13048 Date: Tue May 8 14:39:11 2007 +0200
13050 add: FSL control read and write
13052 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
13054 Date: Tue May 8 13:05:44 2007 +0200
13056 [Motion-PRO] Add support for I2C, EEPROM and RTC.
13058 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
13060 Date: Tue May 8 10:23:56 2007 +0200
13062 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
13065 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
13067 Date: Tue May 8 09:39:12 2007 +0200
13069 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
13070 eliminates networking problems in Linux (timeouts).
13072 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
13074 Date: Tue May 8 09:21:57 2007 +0200
13076 [Motion-PRO] Enable Flat Device Tree support and modify default environment
13077 to allow booting of FDT-expecting kernels.
13079 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
13081 Date: Mon May 7 23:58:31 2007 +0200
13083 new: USE_MSR_INTR support
13085 commit 008861a2f3ef2c062744d733787c7e530a1b8761
13087 Date: Mon May 7 22:36:15 2007 +0200
13089 [MPC5xxx] There are networking problems on the Motion-PRO board with
13090 current PHY initalization code (tftp timeouts all the time). This commit
13091 temporarily disables PHY initalization sequence to make the networking
13092 operational, until a fix is found.
13094 commit abca901869c3760b6c5fecb825db6c1d91a78a93
13096 Date: Mon May 7 22:10:36 2007 +0200
13098 Get rid of duplicated file (see include/configs/sbc8560.h instead)
13102 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
13104 Date: Mon May 7 22:07:08 2007 +0200
13106 Get rid of duplicated file (see doc/README.SBC8560 instead)
13110 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
13112 Date: Mon May 7 19:43:10 2007 +0200
13114 fix: read and write MSR - repair number of parameters
13116 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
13118 Date: Mon May 7 19:42:49 2007 +0200
13120 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
13122 A '3' got cut off in the formatting of the last patch to automatically
13123 change the clock speed of the system clock on sequoia board.
13128 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
13130 Date: Mon May 7 19:33:51 2007 +0200
13132 new: fsl interrupt support
13133 FSL_Has_data is connected to INTC.
13135 commit 792032baa7d625e34c981ab6df521911bd8dc861
13137 Date: Mon May 7 19:30:12 2007 +0200
13139 fix: interrupt handler
13142 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
13144 Date: Mon May 7 19:25:08 2007 +0200
13146 fix: remove asm code
13148 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
13150 Date: Mon May 7 19:12:43 2007 +0200
13152 fix: clean interrupt
13154 commit 42efed6130c8fcf7da881385b5427065d2801757
13156 Date: Mon May 7 17:22:25 2007 +0200
13158 fix: interrupt handler for multiple sources
13160 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
13162 Date: Mon May 7 17:11:09 2007 +0200
13164 new: add writing to msr register
13166 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
13168 Date: Mon May 7 16:43:56 2007 +0200
13170 Fix an ancient CHANGELOG conflict
13172 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
13174 Date: Sat May 5 08:12:30 2007 +0200
13176 5xxx: write MAC address to mac-address and local-mac-address
13178 Some device trees have a mac-address property, some have local-mac-address,
13179 and some have both. To support all of these device trees, ftp_cpu_setup()
13180 should write the MAC address to mac-address and local-mac-address, if they
13186 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
13188 Date: Sun Apr 29 14:01:54 2007 +0200
13190 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
13192 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
13193 message. Use PVR to distinguish between the two variants, and print proper CPU
13200 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
13202 Date: Wed Apr 25 16:01:26 2007 +0200
13204 [PATCH] simplify silent console
13209 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
13211 Date: Mon Apr 23 15:30:39 2007 +0200
13213 [PATCH] Avoid assigning PCI resources from zero address
13215 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
13216 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
13217 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
13218 sentence about "0" being considered an invalid address) -- so, use a reasonable
13219 starting value of 0x1000 (that's what the most Linux archs are using).
13221 Alternatively, one might have fixed the calls to pci_set_region() individually
13222 (some code even seems to have taken care of this issue) but that would have
13223 been a lot more work. :-)
13228 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
13230 Date: Mon Apr 23 14:00:11 2007 +0200
13232 [patch] setenv(...) can delete environmentalvariables
13234 update setenv() function so that entering a NULL value for the
13235 variable's value will delete the environmental variable
13240 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
13242 Date: Mon Apr 23 13:54:24 2007 +0200
13244 [patch] use unsigned char in smc91111 driver for mac
13246 the v_mac variable in the smc91111 driver is declared as a signed char ...
13247 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
13248 because when it gets printed out, you get a display like:
13249 0xFFFFFFE0 and that's no good
13253 commit ffc50f9bb194343c6303517a517708457a5eb6b8
13255 Date: Sat May 5 18:54:42 2007 +0200
13257 new: FSL and MSR support #2
13259 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
13261 Date: Sat May 5 18:27:16 2007 +0200
13263 new: FSL and MSR support
13265 commit 2f15278c2eb911c668b4fe562130b78cf554d139
13267 Date: Sat May 5 18:23:11 2007 +0200
13269 Coding stylke cleanup; update CHANGELOG.
13273 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
13275 Date: Sat May 5 18:05:02 2007 +0200
13277 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
13281 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
13283 Date: Sat May 5 17:15:50 2007 +0200
13285 Make "file" command happy with some config.mk files; update CHANGELOG
13287 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
13289 Date: Sat May 5 08:32:14 2007 +0200
13291 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
13293 The AMCC Secquoia board has been changed in a new revision from using a
13294 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
13295 indicates the difference. This patch reads that bit and uses the correct
13296 clock speed for the board. This code is backward compatable will all
13297 prior boards. All prior boards will be read as 33.000.
13302 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
13304 Date: Sat May 5 08:29:01 2007 +0200
13306 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
13308 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
13309 for the 4k NAND boot image so define bus_frequency to 133MHz here
13310 which is save for the refresh counter setup.
13314 commit 2f550ab976405300f5b07bf2890800840d0aa05f
13316 Date: Sat May 5 08:12:30 2007 +0200
13318 5xxx: write MAC address to mac-address and local-mac-address
13320 Some device trees have a mac-address property, some have local-mac-address,
13321 and some have both. To support all of these device trees, ftp_cpu_setup()
13322 should write the MAC address to mac-address and local-mac-address, if they
13328 commit a79886590593ba1d667c840caa4940c61639f18f
13330 Date: Sat May 5 07:04:42 2007 +0200
13332 NAND: Wrong calculation of page number in nand_block_bad()
13334 In case that there is no memory based bad block table available the
13335 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
13336 nand_block_bad() directly. When parameter 'getchip' is set to zero,
13337 nand_block_bad() will not right shift the offset to calculate the
13338 correct page number.
13343 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
13345 Date: Fri May 4 10:02:33 2007 +0200
13347 Fix initrd length corruption in bootm command.
13349 When using FDT Images, the length of an inital ramdisk was
13350 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
13352 Patches by Timur Tabi & Johns Daniel.
13356 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
13358 Date: Thu May 3 19:43:52 2007 -0500
13360 mpc83xx: fix trivial error in MAKEALL
13364 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
13366 Date: Thu May 3 16:34:41 2007 +0200
13368 Update board configuration for STX GP3SSA board:
13370 Enable hush shell, environment in flash rather in EEPROM,
13371 more user-friendly default environment, etc.
13372 The simple EEPROM environment can be selected easily in the board
13377 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
13379 Date: Tue Apr 24 14:37:49 2007 +0200
13381 Cleanup STX GP3SSA code; fix build and compile problems.
13383 commit 35171dc04e028ecacc23ad916a66295472555dbf
13385 Date: Fri Jan 5 09:15:34 2007 +0100
13387 Add support for STX GP3SSA (stxssa) Board
13391 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
13393 Date: Wed May 2 13:31:53 2007 +0200
13395 macb: Don't restart autonegotiation if we already have link
13397 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
13398 link is already up.
13402 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
13404 Date: Wed May 2 13:22:38 2007 +0200
13406 macb: Introduce a few barriers when dealing with DMA descriptors
13408 There were a few theoretical possibilities that the compiler might
13409 optimize away DMA descriptor reads and/or writes and thus cause
13410 synchronization problems with the hardware. Insert barriers where
13411 we depend on reads/writes actually hitting memory.
13415 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
13417 Date: Sat Feb 24 01:08:13 2007 -0600
13419 Cleaned up some 85xx PCI bugs
13421 * Cleaned up the CDS PCI Config Tables and added NULL entries to
13423 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
13424 * Fixed 85xx PCI code to assign powar region sizes based on the
13425 config values (rather than hard-coding them)
13426 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
13430 commit 6743105988fc44d5b0d30388c790607835aae7a6
13432 Date: Mon Apr 23 02:54:25 2007 -0500
13434 Add support for the 8568 MDS board
13436 This included some changes to common files:
13437 * Add 8568 processor SVR to various places
13438 * Add support for setting the qe bus-frequency value in the dts
13439 * Add the 8568MDS target to the Makefile
13443 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
13445 Date: Fri Apr 20 14:34:48 2007 -0500
13447 Add support for treating unknown PHYs as generic PHYs.
13449 When bringing up u-boot on new boards, PHY support sometimes gets
13450 neglected. Most PHYs don't really need any special support,
13451 though. By adding a generic entry that always matches if nothing
13452 else does, we can provide support for "unsupported" PHYs for the
13455 The generic PHY driver supports most PHYs, including gigabit.
13460 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
13462 Date: Wed Feb 7 15:28:04 2007 -0600
13464 Conditionalize 8641 Rev1.0 MCM workarounds
13469 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
13471 Date: Mon Apr 30 13:59:50 2007 -0500
13473 Fix memory initialization on MPC8349E-mITX
13475 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
13476 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
13477 on some ITX boards, notably those with a revision 3.1 CPU.
13479 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
13480 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
13486 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
13488 Date: Mon Apr 30 15:26:21 2007 -0500
13490 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
13492 and fix CPU: to align with Board: display text.
13496 commit c1ab82669d9525998c34e802a12cad662723f22a
13498 Date: Fri Mar 16 13:02:53 2007 -0500
13500 Rewrote picos_to_clk() to avoid rounding errors.
13501 Clarified that conversion is to DRAM clocks rather than platform clocks.
13502 Made function static to spd_sdram.c.
13507 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
13509 Date: Sun Apr 29 14:13:01 2007 +0200
13511 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
13515 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
13517 Date: Sun Apr 29 14:01:54 2007 +0200
13519 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
13521 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
13522 message. Use PVR to distinguish between the two variants, and print proper CPU
13529 commit 5c5d3242935cf3543af01142627494434834cf98
13531 Date: Wed Apr 25 12:34:38 2007 -0500
13533 mpc83xx: minor fixups for 8313rdb introduction
13535 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
13537 Date: Wed Apr 25 16:01:26 2007 +0200
13539 [PATCH] simplify silent console
13544 commit 144876a380f5756f57412caf74c1d6dc201dd796
13546 Date: Tue Apr 24 23:01:02 2007 +0200
13548 [PATCH] MTD partition support, JFFS2 support
13550 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
13552 Date: Tue Apr 24 14:03:45 2007 +0200
13554 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
13558 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
13560 Date: Mon Apr 23 02:37:47 2007 -0500
13562 Reworked 85xx speed detection code
13564 Changed the code to read the registers and calculate the clock
13565 rates, rather than using a "switch" statement.
13571 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
13573 Date: Mon Apr 23 02:24:28 2007 -0500
13575 Enable 8544 support
13577 * Add support to the Makefile
13578 * Add 8544 configuration support to the tsec driver
13579 * Add 8544 SVR numbers to processor.h
13584 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
13586 Date: Fri Feb 23 17:12:25 2007 -0600
13588 Support 1G size on 8548
13590 e500v2 and newer cores support 1G page sizes.
13595 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
13597 Date: Fri Feb 23 17:11:16 2007 -0600
13599 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
13601 The other pagesz constants use one letter to specify order of
13602 magnitude. Also change the one reference to it in mpc8548cds/init.S
13606 commit 1f9a318cea14272edd10d63739e2d326c90f430e
13608 Date: Fri Feb 23 16:28:46 2007 -0600
13610 Only set ddrioovcr for 8548 rev1.
13615 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
13617 Date: Sat Feb 24 01:16:45 2007 -0600
13619 Tweak DDR ECC error counter
13621 Enable single-bit error counter when memory was cleared by ddr controller.
13626 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
13628 Date: Mon Feb 12 13:34:55 2007 -0600
13630 85xx: write MAC address to mac-address and local-mac-address
13632 Some device trees have a mac-address property, some have local-mac-address,
13633 and some have both. To support all of these device trees, ftp_cpu_setup()
13634 should write the MAC address to mac-address and local-mac-address, if they
13639 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
13641 Date: Mon Apr 23 01:44:44 2007 -0500
13643 Some 85xx cpu cleanups
13645 * Cleaned up the TSR[WIS] clearing
13646 * Cleaned up DMA initialization
13652 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
13654 Date: Mon Apr 23 01:32:22 2007 -0500
13656 Add cpu support for the 8544
13658 Recognize new SVR values, and add a few register definitions
13664 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
13666 Date: Wed Apr 11 16:51:02 2007 -0500
13668 Add MPC8544DS basic port board files.
13670 Add board port under new board/freescale directory
13671 structure and reuse existing PIXIS FPGA support there.
13676 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
13678 Date: Wed Apr 11 16:50:57 2007 -0500
13680 Add MPC8544DS main configuration file.
13685 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
13687 Date: Wed Dec 27 22:07:15 2006 +0300
13689 Fix PCI I/O space mapping on Freescale MPC85x0ADS
13691 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
13692 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
13693 describing the local address window used for the PCI I/O space accesses -- fix
13694 this and carry over the necessary changes into the MPC8560ADS code since the
13695 PCI I/O space mapping was also broken for this board (by the earlier commit
13696 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
13697 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
13701 board/mpc8540ads/init.S | 4 ++--
13702 board/mpc8560ads/init.S | 4 ++--
13703 include/configs/MPC8540ADS.h | 5 ++---
13704 include/configs/MPC8541CDS.h | 2 +-
13705 include/configs/MPC8548CDS.h | 2 +-
13706 include/configs/MPC8560ADS.h | 8 ++++----
13707 6 files changed, 12 insertions(+), 13 deletions(-)
13709 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
13711 Date: Tue Dec 5 16:42:30 2006 +0800
13713 u-boot: Fix e500 v2 core reset bug
13715 The following patch fixes the e500 v2 core reset bug.
13716 For e500 v2 core, a new reset control register is added to reset the
13721 commit 63247a5acd58032e6cf33f525bc3923b467bac88
13723 Date: Wed Dec 20 11:01:00 2006 +0800
13725 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
13727 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
13728 entry number to control the loop. This can reduce the potential risk
13729 for the 85xx processor increasing its TLB adn LAW entry number.
13734 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
13736 Date: Mon Dec 18 17:01:04 2006 +0800
13738 u-boot: Fix the 85xxcds tsec bug
13740 Fix the 85xxcds tsec bug.
13741 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
13745 commit 7337b237ffc4aaf1b9467024fe472a880d852598
13747 Date: Fri Dec 15 14:43:31 2006 +0800
13749 u-boot: Fix CPU2 errata on MPC8548CDS board
13751 This patch apply workaround of CPU2 errata on MPC8548CDS board.
13755 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
13757 Date: Mon Dec 18 16:25:15 2006 +0800
13759 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
13761 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
13765 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
13767 Date: Thu Dec 14 14:14:55 2006 +0800
13769 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
13771 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
13775 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
13777 Date: Mon Apr 16 14:54:15 2007 -0500
13779 mpc83xx: Add MPC8313ERDB support.
13783 commit 49ea3b6eafe606285ae4d5c378026153dde53200
13785 Date: Mon Apr 16 14:34:21 2007 -0500
13787 mpc83xx: Add generic PCI setup code.
13789 Board code can now request the generic setup code rather than having to
13790 copy-and-paste it for themselves. Boards should be converted to use this
13791 once they're tested with it.
13795 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
13797 Date: Mon Apr 16 14:34:19 2007 -0500
13799 mpc83xx: Add 831x support to speed.c.
13803 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
13805 Date: Mon Apr 16 14:34:18 2007 -0500
13807 mpc83xx: Add 831x support to global_data.h
13811 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
13813 Date: Mon Apr 16 14:34:16 2007 -0500
13815 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
13817 Rather than misleadingly define PVR_83xx as the specific type of 83xx
13818 being built for, the PVR of each core revision is defined. checkcpu() now
13819 prints the core that it detects, rather than aborting if it doesn't find
13820 what it thinks it wants.
13824 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
13826 Date: Mon Apr 16 14:34:15 2007 -0500
13828 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
13832 commit d87c57b201b4572d16f1b642998faa00c9912b16
13834 Date: Mon Apr 16 14:31:55 2007 -0500
13836 mpc83xx: Add register definitions for MPC831x.
13840 commit 7fc4c71a143be8666d70803fb25ae60379c95622
13842 Date: Mon Apr 23 15:39:59 2007 +0200
13848 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
13850 Date: Mon Apr 23 15:30:39 2007 +0200
13852 [PATCH] Avoid assigning PCI resources from zero address
13854 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
13855 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
13856 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
13857 sentence about "0" being considered an invalid address) -- so, use a reasonable
13858 starting value of 0x1000 (that's what the most Linux archs are using).
13860 Alternatively, one might have fixed the calls to pci_set_region() individually
13861 (some code even seems to have taken care of this issue) but that would have
13862 been a lot more work. :-)
13867 commit afb903a2eb9436baa9270ccc0c27082d86497d89
13869 Date: Mon Apr 23 14:00:11 2007 +0200
13871 [patch] setenv(...) can delete environmentalvariables
13873 update setenv() function so that entering a NULL value for the
13874 variable's value will delete the environmental variable
13879 commit 36f104e5caa747d568eff26b369565af57c2ffa6
13881 Date: Mon Apr 23 13:54:24 2007 +0200
13883 [patch] use unsigned char in smc91111 driver for mac
13885 the v_mac variable in the smc91111 driver is declared as a signed char ...
13886 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
13887 because when it gets printed out, you get a display like:
13888 0xFFFFFFE0 and that's no good
13892 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
13894 Date: Mon Apr 23 13:10:52 2007 +0200
13896 USB: (Another) delay for crappy USB keys.
13898 Some USB keys are slow in giving back an answer when the Root HUB
13899 enables power lines.
13903 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
13905 Date: Mon Apr 23 12:00:22 2007 +0200
13907 Remove BOARDLIBS usage completely
13911 commit 32556443840f127170e4baa8bdd5b567039f6c36
13913 Date: Sat Apr 21 21:07:22 2007 +0200
13915 [PATCH] SystemACE support for Microblaze
13917 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
13919 Date: Sat Apr 21 21:02:40 2007 +0200
13921 16bit read/write little endian
13923 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
13925 Date: Sat Apr 21 20:53:31 2007 +0200
13927 Change ML401 parameters - Xilinx BSP
13929 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
13931 Date: Wed Feb 28 05:37:29 2007 -0600
13933 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
13937 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
13939 Date: Fri Jan 19 10:42:37 2007 +0800
13941 Enable LAWs for MPC8641 PCI-Ex2.
13946 commit bd7851ce1e1f140665b520026abf1042968b1102
13948 Date: Fri Apr 20 14:12:26 2007 -0500
13950 mpc86xx; Write MAC address to mac-address and local-mac-address
13952 Some device trees have a mac-address property, some have local-mac-address,
13953 and some have both. To support all of these device trees, ftp_cpu_setup()
13954 should write the MAC address to mac-address and local-mac-address, if they
13960 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
13962 Date: Fri Apr 20 14:11:38 2007 -0500
13964 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
13969 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
13971 Date: Fri Apr 20 17:43:28 2007 +0200
13973 Cleanup compiler warnings, update CHANGELOG
13977 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
13979 Date: Fri Apr 20 12:01:47 2007 +0200
13981 Fix breakage of NC650 board with respect to nand support.
13985 commit 39f23cd90947639ac278a18ff277ec786b5ac167
13987 Date: Fri Apr 20 11:13:16 2007 +0200
13989 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
13991 G2 core reference manual says decrementer and time base
13992 are decreasing/increasing once every 4 bus clock cycles.
13993 Lets fix it, so time in Linux won't run twice as fast
13998 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
14000 Date: Thu Apr 19 23:14:39 2007 -0400
14002 Fix serious pointer bug with bootm and reserve map.
14004 What was suppose to be a stack variable was declared as a pointer,
14005 overwriting random memory.
14006 Also moved the libfdt.a requirement into the main Makefile. That is
14009 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
14011 Date: Thu Apr 19 09:53:52 2007 +0200
14013 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
14015 Previous versions used full wait states for the chip select #1 which
14016 is connected to the Xilinix SystemACE controller on the AMCC Katmai
14017 evaluation board. This leads to really slow access and therefore low
14018 performance. This patch now sets up the chip select a lot faster
14019 resulting in much better read/write performance of the Linux driver.
14023 commit 37837828d89084879bee2f2b8c7c68d4695940df
14025 Date: Wed Apr 18 17:49:29 2007 +0200
14027 Clenaup, update CHANGELOG
14031 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
14033 Date: Wed Apr 18 17:20:58 2007 +0200
14039 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
14041 Date: Wed Apr 18 17:07:26 2007 +0200
14043 Cleanup, update CHANGELOG
14047 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
14049 Date: Wed Apr 18 16:17:46 2007 +0200
14053 commit ad4eb555671d97f96dc56eab55103b1f86874b01
14055 Date: Wed Apr 18 14:30:39 2007 +0200
14057 MCC200 board: remove warning which is obsolete after PSoC firmware changes
14061 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
14063 Date: Wed Apr 18 12:11:05 2007 +0200
14065 [PATCH] icecube/lite5200b: document wakeup from low-power support
14069 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
14071 Date: Wed Apr 18 12:07:47 2007 +0200
14073 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
14077 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
14079 Date: Wed Apr 18 12:05:59 2007 +0200
14081 ppc4xx: Add output for bootrom location to 405EZ ports
14083 Now 405EZ ports also show upon bootup from which boot device
14084 they are configured to boot:
14086 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
14088 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
14089 Bootstrap Option E - Boot ROM Location EBC (32 bits)
14090 16 kB I-Cache 16 kB D-Cache
14091 Board: Acadia - AMCC PPC405EZ Evaluation Board
14095 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
14097 Date: Tue Apr 17 13:30:33 2007 +0100
14099 Move ppearse to ARM board list
14100 Add Konstantin Kletschke for scb9328.
14103 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
14105 Date: Mon Apr 16 14:00:13 2007 +0200
14107 [PATCH] icecube/lite5200b: wakeup from low-power support
14109 U-Boot part of Lite5200b low power mode support.
14110 Puts SDRAM out of self-refresh and transfers control to
14111 address saved at physical 0x0.
14116 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
14118 Date: Sun Apr 15 13:54:26 2007 -0400
14120 Fix the ft_cpu_setup() property settings.
14122 Use "setter" functions instead of flags, cleaner and more flexible.
14123 It also fixes the problem noted by Timur Tabi that the ethernet MAC
14124 addresses were all being set incorrectly to the same MAC address.
14126 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
14128 Date: Sat Apr 14 22:51:24 2007 -0400
14130 Improve the bootm command for CONFIG_OF_LIBFDT
14132 In bootm, create the "/chosen" node only if it doesn't already exist
14133 (better matches the previous behavior).
14134 Update for proper reserved memory map handling for initrd.
14136 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
14138 Date: Sat Apr 14 22:46:41 2007 -0400
14140 Add some utilities to manipulate the reserved memory map.
14142 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
14144 Date: Sat Apr 14 21:16:54 2007 +0200
14148 commit 8e6875183cdca91c134408d119d4abcd48ef6856
14150 Date: Sun Dec 17 18:56:46 2006 +0100
14152 AVR32: Enable MMC support
14154 Set up the portmux for the MMC interface and enable the MMC driver
14155 along with support for DOS partitions, ext2 and FAT filesystems.
14159 commit fc26c97bb6df41b4a95662c34054fe912387bf38
14161 Date: Fri Jan 20 10:03:53 2006 +0100
14165 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
14167 The AT91 ARM-based CPUs use basically the same hardware, so it should
14168 be possible to share this driver, but no effort has been made so far.
14170 Hardware documentation can be found in the AT32AP7000 data sheet,
14171 which can be downloaded from
14173 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
14177 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
14179 Date: Sun Dec 17 18:55:37 2006 +0100
14181 AVR32: Add clk and gpio infrastructure for mmci
14183 Implement functions for configuring the mmci pins, as well as
14184 functions for getting the clock rate of the mmci controller.
14188 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
14190 Date: Sun Dec 17 18:53:56 2006 +0100
14192 Enable partition support with MMC
14194 Include implementations of init_part() and get_partition_info() when
14199 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
14201 Date: Sun Dec 17 17:14:30 2006 +0100
14203 AVR32: Enable networking
14205 Implement MACB initialization for AVR32 and ATSTK1000, and turn
14206 everything on, including the MACB driver.
14210 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
14212 Date: Fri Jan 20 10:03:34 2006 +0100
14214 Atmel MACB ethernet driver
14216 Driver for the Atmel MACB on-chip ethernet controller.
14218 This driver has been tested on the ATSTK1000 board with a AT32AP7000
14219 CPU. It should probably work on AT91SAM926x as well with some minor
14222 Hardware documentation can be found in the AT32AP7000 data sheet,
14223 which can be downloaded from
14225 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
14229 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
14231 Date: Sun Dec 17 16:56:14 2006 +0100
14233 AVR32: Add clk and gpio infrastructure for macb0 and macb1
14235 Implement functions for configuring the macb0 and macb1 pins, as
14236 well as functions for getting the clock rate of the various
14237 busses the macb ethernet controllers are connected to.
14241 commit d5acb95b16a0a74c643524342c3437e765426d05
14243 Date: Sun Dec 17 15:39:15 2006 +0100
14245 AVR32: Implement simple DMA memory allocator
14247 Implement dma_alloc_coherent() which returns cache-aligned
14248 uncacheable memory.
14252 commit 91975b0fea773c9e681fea8cf3349669f27685ee
14254 Date: Sun Dec 17 15:46:02 2006 +0100
14256 Import <linux/mii.h> from the Linux kernel
14258 Instead of creating yet another set of MII register definitions
14259 in the macb driver, here's a complete set of definitions for everyone
14264 commit 1b804b229556a4d862da93c0ec94e79419364b2c
14266 Date: Wed Mar 21 19:47:36 2007 +0100
14268 AVR32: Include more commands for ATSTK1000
14270 Include the imi, imls and jffs commands sets by default on ATSTK1000.
14271 Also define CONFIG_BOOTARGS to something more useful, define
14272 CONFIG_BOOTCOMMAND and enable autoboot by default.
14276 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
14278 Date: Wed Mar 21 19:44:48 2007 +0100
14280 AVR32: Provide a definition of struct stat
14282 Copy the definition of struct stat from the Linux kernel.
14286 commit 12f099c08167a7a51aeee623bc16dafd0841271c
14288 Date: Sun Dec 17 14:46:06 2006 +0100
14290 AVR32: Use initdram() instead of board_init_memories()
14292 Conform to the "standard" interface and use initdram() instead of
14293 board_init_memories() on AVR32. This enables us to get rid of the
14294 sdram_size member of the global_data struct as well.
14298 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
14300 Date: Mon Nov 20 15:53:10 2006 +0100
14302 AVR32: Relocate u-boot to SDRAM
14304 Relocate the u-boot image into SDRAM like everyone else does. This
14305 means that we can handle much larger .data and .bss than we used to.
14309 commit df548d3c3e2bbc40258713167859ffc2ce99a900
14311 Date: Sun Nov 19 18:06:53 2006 +0100
14313 AVR32: Resource management rewrite
14315 Rewrite the resource management code (i.e. I/O memory, clock gating,
14316 gpio) so it doesn't depend on any global state. This is necessary
14317 because this code is heavily used before relocation to RAM, so we
14318 can't write to any global variables.
14320 As an added bonus, this makes u-boot's memory footprint a bit smaller,
14321 although some functionality has been left out; all clocks are enabled
14322 all the time, and there's no checking for gpio line conflicts.
14326 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
14328 Date: Sat Nov 18 18:01:13 2006 +0100
14330 AVR32: Clean up memory-map.h for at32ap7000
14332 Convert spaces to tabs (must have missed this one last time around),
14333 sort the entries by address and group them together by bus
14338 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
14340 Date: Sat Nov 18 17:32:31 2006 +0100
14342 AVR32: Build position-independent u-boot
14344 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
14345 position independent. This will make relocation a lot easier.
14347 -mno-init-got means that gcc shouldn't emit code to load the GOT
14348 address into r6 in every function prologue. We do it once and for
14349 all in the early startup assembly code, so enabling this option
14350 makes u-boot a bit faster and smaller.
14352 The assembly parts have always been position-independent, so no code
14353 changes should be necessary.
14357 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
14359 Date: Sat Nov 18 17:24:31 2006 +0100
14361 AVR32: Use avr32-linux- cross-compilation prefix by default
14363 It doesn't really matter which toolchain you use to compile u-boot,
14364 but the avr32-linux one is probably what most people have installed.
14368 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
14370 Date: Sat Nov 18 17:15:30 2006 +0100
14372 AVR32: Split start_u_boot into board_init_f and board_init_r
14374 Split the avr32 initialization code into a function to run before
14375 relocation, board_init_f and a function to run after relocation,
14376 board_init_r. For now, board_init_f simply calls board_init_r
14381 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
14383 Date: Sat Apr 14 05:26:48 2007 +0200
14385 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
14386 clear the Display after reset.
14390 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
14392 Date: Fri Apr 13 09:13:33 2007 +0200
14394 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
14396 Fix bug introduced by "Fix get_partition_info() parameter error in all
14397 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
14398 to use diskboot or scsiboot form another device than 0.
14402 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
14404 Date: Fri Apr 13 08:02:24 2007 +0200
14406 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
14411 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
14413 Date: Fri Mar 9 19:08:25 2007 +0800
14415 Fix two bugs for MPC83xx DDR2 controller SPD Init
14417 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
14418 the first bug is that the picos_to_clk routine introduces a huge
14419 rounding error in 83xx.
14420 the second bug is that the mode register write recovery field is
14421 tWR-1, not tWR >> 1.
14423 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
14425 Date: Thu Apr 12 14:15:59 2007 +0200
14427 ppc4xx: Fix i2c divisor calcularion for PPC4xx
14429 This patch fixes changes the i2c_init(...) function to use the function
14430 get_OPB_freq() rather than calculating the OPB speed by
14431 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
14432 specific per processor. The prior method was not and so was calculating
14433 the wrong speed for some PPC4xx processors.
14438 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
14440 Date: Wed Apr 11 17:25:01 2007 +0200
14446 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
14448 Date: Wed Apr 11 17:22:55 2007 +0200
14450 Update for SC3 board
14452 * Make IDE timeout configurable through ide_reset_timeout variable.
14453 * Use Newline as "password" string
14454 * Use just a single partition in NAND flash
14456 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
14458 Date: Mon Jan 22 12:37:30 2007 -0600
14460 Add PIXIS FPGA support for MPC8641HPCN board.
14462 Move the 8641HPCN's PIXIS code to the new directory
14463 board/freescale/common/ as it will be shared by
14464 future boards not in the same processor family.
14466 Write a "pixis_reset" command that utilizes the FPGA
14467 reset sequencer to support alternate soft-reset options
14468 such as using the "alternate" flash bank, enabling
14469 the watch dog, or choosing different CPU frequencies.
14471 Add documentation for the pixis_reset to README.mpc8641hpcn.
14476 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
14478 Date: Fri Apr 6 14:19:43 2007 -0400
14480 Moved fdt command support code to fdt_support.c
14482 ...in preparation for improving the bootm command's handling of fdt blobs.
14483 Also cleaned up some coding sloppiness.
14485 commit 6679f9299534e488a171a9bb8f9bb891de247aab
14487 Date: Fri Apr 6 14:17:14 2007 -0400
14489 libfdt: Make fdt_check_header() public
14491 Changed _fdt_check_header() to fdt_check_header() and made it part of
14492 the interface - it is a useful routine.
14494 Also did some asthetics cleanup to the include files (headers).
14496 commit c0707ce65677650b5ceab0500ee50ae5168afef2
14498 Date: Thu Apr 5 18:34:06 2007 +0800
14500 [Blackfin][PATCH] Kill off a bunch of common local prototypes
14502 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
14504 Date: Thu Apr 5 18:33:04 2007 +0800
14506 [Blackfin][PATCH] Fix dynamic CPLB generation issue
14508 commit 0445e3a264251d75b1be45ef713c70726a2952f0
14510 Date: Thu Apr 5 18:31:47 2007 +0800
14512 [Blackfin][PATCH] minior cleanup
14514 commit 155fd766573981090e638b493d5857562151862e
14516 Date: Thu Apr 5 18:31:18 2007 +0800
14518 [Blackfin][PATCH] Fix copyright and update license
14520 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
14522 Date: Thu Apr 5 18:30:25 2007 +0800
14524 [Blackfin][PATCH] Add BF537 EMAC driver initialization
14526 commit 889256e8604e0c68db1d866d720894dffede9df6
14528 Date: Thu Apr 5 18:29:55 2007 +0800
14530 [Blackfin][PATCH] call real the system synchronize instruction
14532 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
14534 Date: Thu Apr 5 18:29:17 2007 +0800
14536 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
14538 commit dfeeab2cd680df047e68e723b246adf6f33bb556
14540 Date: Thu Apr 5 18:28:34 2007 +0800
14542 [Blackfin][PATCH]: fix flash unaligned copy issue
14544 commit 443feb740584e406efa203af909fe2926608e8d5
14546 Date: Wed Mar 21 09:55:01 2007 +0300
14548 Update usage of 'nc' in README.NetConsole
14550 Added information about usage of NetConsole on systems where the -l and -p
14551 switches are mutually exclusive.
14556 commit 31c98a88228021b314c89ebb8104fb6473da4471
14558 Date: Wed Apr 4 02:09:30 2007 +0200
14560 Minor coding style cleanup.
14562 commit 94abd7c0583ebe01e799b25f451201deeaab550d
14564 Date: Wed Apr 4 01:49:15 2007 +0200
14568 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
14570 Date: Tue Apr 3 14:27:18 2007 +0200
14572 Support for the Philips ISP116x HCD (Host Controller Driver)
14576 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
14578 Date: Tue Apr 3 14:27:08 2007 +0200
14580 USB: cleanup monahans usb support. Remove dead code.
14584 commit a65c5768e5537530bd1780af3d3fddc3113a163c
14586 Date: Mon Apr 2 10:09:30 2007 +0200
14588 ppc4xx: Change SysACE address on Katmai
14590 With this new base address of the Xilinx SystemACE controller
14591 the Linux driver will be easier to adapt, since it can now be
14592 mapped via the "normal" ioremap() call.
14596 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
14598 Date: Sat Mar 31 14:30:53 2007 -0400
14600 Fix some minor whitespace violations.
14602 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
14604 Date: Sat Mar 31 12:23:51 2007 -0400
14606 Add a flattened device tree (fdt) command (2 of 2)
14608 Modifications to the existing code to support the new fdt command.
14610 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
14612 Date: Sat Mar 31 12:22:10 2007 -0400
14614 Add a flattened device tree (fdt) command (1 of 2)
14616 The fdt command uses David Gibson's libfdt library to manipulate as well
14617 as print the flattened device tree. This patch is the new command,
14618 the second part is the modifications to the existing code.
14620 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
14622 Date: Sat Mar 31 12:13:43 2007 -0400
14624 libfdt: Enhanced and published fdt_next_tag()
14626 Enhanced the formerly private function _fdt_next_tag() to allow stepping
14627 through the tree, used to produce a human-readable dump, and made
14628 it part of the published interface.
14629 Also added some comments.
14631 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
14633 Date: Sat Mar 31 12:05:39 2007 -0400
14635 libfdt: Customizations for use by u-boot.
14637 Changes to David Gibson's original source to fit into u-boot's
14638 environment. No functionality changes.
14640 commit 35748177c64a4a83a00057e93bb33e40278a2a96
14642 Date: Sat Mar 31 12:00:56 2007 -0400
14644 libfdt: Import libfdt source (2 of 2)
14646 This adds the applicable libfdt source files (unmodified) and a README
14647 to explain where the source came from.
14649 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
14651 Date: Sat Mar 31 11:59:59 2007 -0400
14653 libfdt: Import libfdt source (1 of 2)
14655 This adds the applicable libfdt source files (unmodified) and a README
14656 to explain where the source came from.
14658 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
14660 Date: Sat Mar 31 13:16:23 2007 +0200
14662 ppc4xx: Update Katmai bootstrap command
14664 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
14669 commit cabee756a6532986729477c3cc1ea16ef8517ad2
14671 Date: Sat Mar 31 13:15:06 2007 +0200
14673 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
14675 Additional RAM information is now printed upon powerup, like
14676 DDR2 frequency and CAS latency.
14680 commit 60723803431ac75cad085690789e433d5ab9174e
14682 Date: Sat Mar 31 08:48:36 2007 +0200
14684 ppc4xx: Change Yucca config file to support ECC
14686 With the updated 44x DDR2 driver the Yucca board now supports
14687 ECC generation and checking.
14691 commit 490e5730c674b20d708b783a2c5ffd7208f83873
14693 Date: Sat Mar 31 08:47:34 2007 +0200
14695 ppc4xx: Fix "bootstrap" command for Katmai board
14697 The board specific "bootstrap" command is now fixed and can
14698 be used for the AMCC Katmai board to configure different
14699 CPU/PLB/OPB frequencies.
14703 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
14705 Date: Sat Mar 31 08:46:08 2007 +0200
14707 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
14709 Fix a bug in the auto calibration routine. This driver now runs
14710 more reliable with the tested modules. It's also tested with
14711 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
14715 commit 342cd097be1e7affe82f42ab3da220959a699e64
14717 Date: Fri Mar 30 22:52:09 2007 +0200
14719 [PATCH] Clean include dependence
14721 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
14723 Date: Fri Mar 30 22:42:45 2007 +0200
14725 [CLEAN] Remove inefficient Suzaku code
14727 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
14729 Date: Wed Mar 28 15:03:16 2007 +0200
14731 Merge some AMCC make targets to keep the top-level Makefile smaller
14735 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
14737 Date: Wed Mar 28 14:52:12 2007 +0200
14739 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
14741 The "old" i2c commands (iprobe, imd...) are now compiled in again,
14742 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
14747 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
14749 Date: Tue Mar 27 00:32:16 2007 +0200
14751 PATCH: Resolve GPL license problem
14753 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
14755 Date: Mon Mar 26 12:03:36 2007 +0200
14757 PXA: pxa27x USB OHCI support
14761 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
14763 Date: Mon Mar 26 11:21:05 2007 +0200
14765 USB: remove the S3C24X0_merge #define, which was introduced while
14766 merging OHCI drivers.
14770 commit 1798049522f594013aea29457d46794298c6ae15
14772 Date: Mon Mar 26 01:39:07 2007 +0200
14774 Support for XUPV2P board
14776 BSP autoconfig support
14778 commit 0d974d5297349504a2ddfa09314be573b5df320a
14780 Date: Sat Mar 24 15:57:09 2007 +0100
14782 [PATCH] Add 4xx GPIO functions
14784 This patch adds some 4xx GPIO functions. It also moves some of the
14785 common code and defines into a common 4xx GPIO header file.
14789 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
14791 Date: Sat Mar 24 15:55:58 2007 +0100
14793 [PATCH] Small Sequoia cleanup
14797 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
14799 Date: Sat Mar 24 15:45:34 2007 +0100
14801 [PATCH] Clean up 40EZ/Acadia support
14803 This patch cleans up all the open issue of the preliminary
14808 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
14810 Date: Tue Dec 12 11:02:20 2006 -0600
14812 Fix 8641HPCN problem with ld version 2.16
14814 (Dot outside sections problem).
14816 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
14820 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
14822 Date: Thu Dec 7 10:35:55 2006 -0600
14824 Set Rev 2.x 86xx PIC in mixed mode.
14826 Prevent false interrupt from hanging Linux as MSR[EE] is set
14827 to enable interrupts by changing the PIC out of the default
14828 pass through mode into mixed mode.
14833 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
14835 Date: Thu Dec 7 10:32:35 2006 -0600
14837 Add flash cmd function to 8641HPCN ramboot
14839 Also fixes some commmand for 8641 HPCN ramboot case.
14844 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
14846 Date: Thu Dec 7 10:34:14 2006 -0600
14848 Add support for 8641 Rev 2 silicon.
14850 Without this patch, I am unable to get to the prompt on rev 2 silicon.
14851 Only set ddrioovcr for rev1.
14856 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
14858 Date: Thu Mar 22 00:13:12 2007 +0100
14860 Code cleanup / re-insert previous Copyright entries.
14864 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
14866 Date: Wed Mar 21 23:26:15 2007 +0100
14868 Code cleanup. Update CHANGELOG
14870 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
14872 Date: Wed Mar 21 14:54:29 2007 +0100
14874 ppc4xx: Fix file mode of include/configs/acadia.h
14878 commit d5f4614c9350d9333e575100fb250aab774d0258
14880 Date: Wed Mar 21 14:41:46 2007 +0100
14882 SPC1920: fix small clock routing bug
14886 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
14888 Date: Wed Mar 21 13:39:57 2007 +0100
14890 [PATCH] Add AMCC Acadia (405EZ) eval board support
14892 This patch adds support for the new AMCC Acadia eval board.
14894 Please note that this Acadia/405EZ support is still in a beta stage.
14895 Still lot's of cleanup needed but we need a preliminary release now.
14899 commit e01bd218b00af73499331a1a701625a852cd286f
14901 Date: Wed Mar 21 13:38:59 2007 +0100
14903 [PATCH] Add AMCC PPC405EZ support
14905 This patch adds support for the new AMCC 405EZ PPC. It is in
14906 preparation for the AMCC Acadia board support.
14908 Please note that this Acadia/405EZ support is still in a beta stage.
14909 Still lot's of cleanup needed but we need a preliminary release now.
14913 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
14915 Date: Wed Mar 21 08:45:17 2007 +0100
14917 [PATCH] TQM8272: dont change the bits given from the HRCW
14918 for the SIUMCR and BCR Register.
14919 Fix the calculation for the EEprom Size
14923 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
14925 Date: Tue Mar 20 18:16:24 2007 +0800
14927 [Blackfin][PATCH] Add BF561 EZKIT board support
14929 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
14931 Date: Mon Mar 19 22:55:58 2007 +0800
14933 [Blackfin][PATCH] minor cleanup
14935 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
14937 Date: Mon Mar 19 13:10:08 2007 +0100
14939 Remove obsoleted POST files.
14943 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
14945 Date: Mon Mar 19 01:26:11 2007 +0800
14947 [PATCH] Add flash chip M29W320ET/B support
14949 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
14951 Date: Mon Mar 19 01:24:52 2007 +0800
14953 [Blackfin][PATCH] Add BF537 stamp board support
14955 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
14957 Date: Fri Mar 16 21:11:42 2007 +0100
14959 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
14961 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
14962 DDR memory are dynamically programmed matching the total size
14963 of the equipped memory (DIMM modules).
14967 commit 76d1466f918b881cda2d259254761e73885093c2
14969 Date: Tue Mar 13 13:38:05 2007 +0100
14971 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
14972 boards in terms of unification.
14976 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
14978 Date: Tue Mar 13 16:05:55 2007 +0100
14980 Make SC3 board build with 'make O='; use 'addcons' consistently
14981 (SC3 and Jupiter used to use 'addcon' instead).
14985 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
14987 Date: Tue Mar 13 09:40:59 2007 +0100
14989 [PATCH] update board config for jupiter Board:
14991 CONFIG_CMDLINE_EDITING,
14992 CFG_ENV_ADDR_REDUND activated
14996 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
14998 Date: Mon Mar 12 12:11:55 2007 +0800
15000 [Blackfin][PATCH] minor cleanup
15002 commit bfa5754a58477ac917d21527cd0f079d87cf188e
15004 Date: Mon Mar 12 01:42:06 2007 +0800
15006 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
15008 commit 8440bb14581a294375c34b91b42512f9753d1130
15010 Date: Mon Mar 12 00:25:14 2007 +0800
15012 [Blackfin][PATCH] code cleanup
15014 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
15016 Date: Sun Mar 11 13:48:24 2007 +0100
15018 [Microblaze][PATCH] part 2
15020 interrupt controller support
15024 board information support
15026 booting image support
15028 adding support for Xilinx ML401
15030 commit 76316a318de91f6184e7c22a10e02d275ade2441
15032 Date: Sun Mar 11 13:42:58 2007 +0100
15034 [Microblaze][PATCH]
15036 interrupt controller support
15040 board information support
15042 booting image support
15044 adding support for Xilinx ML401
15046 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
15048 Date: Sat Mar 10 23:49:29 2007 +0800
15050 [Blackfin][PATCH] code cleanup
15052 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
15054 Date: Fri Mar 9 13:40:56 2007 +0800
15056 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
15058 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
15060 Date: Fri Mar 9 13:38:44 2007 +0800
15062 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
15064 commit 992423ab43c2bcf6b704853bd00af77450915e20
15066 Date: Thu Mar 8 23:00:08 2007 +0100
15068 ppc4xx: Fix file mode of sequoia.c
15072 commit eb92f613556800f7483666db09d9a237ad911d4a
15074 Date: Thu Mar 8 22:52:51 2007 +0100
15078 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
15080 Date: Thu Mar 8 09:39:48 2007 -0600
15082 ppc4xx: Clear Sequoia/Rainier security engine reset bits
15086 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
15088 Date: Thu Mar 8 16:26:52 2007 +0100
15090 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
15094 commit d9fc703246840c4b268debf48c334ba55c597dc0
15096 Date: Thu Mar 8 16:25:47 2007 +0100
15098 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
15102 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
15104 Date: Thu Mar 8 16:23:11 2007 +0100
15106 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
15110 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
15112 Date: Thu Mar 8 16:20:32 2007 +0100
15114 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
15118 commit f9fc6a5852a6335840882fa2111925010eea1abe
15120 Date: Wed Mar 7 15:32:01 2007 +0100
15122 fixed ethernet phy configuration for plu405 board
15126 commit 769104c9356594deb2092e204a39c05b33202d6c
15128 Date: Thu Mar 8 21:49:27 2007 +0100
15132 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
15134 Date: Thu Mar 8 10:13:16 2007 +0100
15136 [PATCH] Update AMCC Luan 440SP eval board support
15138 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
15139 inititializition. This includes DDR auto calibration and support
15140 for different DIMM modules, instead of the fixed setup used in
15141 the earlier version.
15143 This patch also enables the cache in FLASH for the startup
15144 phase of U-Boot (while running from FLASH). After relocating to
15145 SDRAM the cache is disabled again. This will speed up the boot
15146 process, especially the SDRAM setup, since there are some loops
15147 for memory testing (auto calibration).
15151 commit 2f5df47351910a2936c7741cf111855829200943
15153 Date: Thu Mar 8 10:10:18 2007 +0100
15155 [PATCH] Update AMCC Yucca 440SPe eval board support
15157 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
15158 inititializition. This includes DDR auto calibration and support
15159 for different DIMM modules, instead of the fixed setup used in
15160 the earlier version.
15164 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
15166 Date: Thu Mar 8 10:07:18 2007 +0100
15168 ppc4xx: Small AMCC Katmai 440SPe update
15172 commit df294497479b1dca6dd86318b2a912f72fede0df
15174 Date: Thu Mar 8 10:06:09 2007 +0100
15176 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
15180 commit 83853178bd36bca6f0f8f1331476620c84a587fc
15182 Date: Wed Mar 7 12:14:50 2007 -0600
15184 net - Support ping reply when processing net-loop
15186 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
15188 This permits the ping command to test the phy interface when the phy
15189 is put in loopback mode (typically by setting register 0 bit 14).
15191 It also allows the port to respond to an external ping when u-boot is
15192 processing some other net command (such as tftp). This is useful when
15193 tftp appears to hang.
15198 commit fa1aef15bcd47736687be1af544506e90fba545d
15200 Date: Wed Mar 7 16:43:00 2007 +0100
15202 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
15204 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
15205 DDR memory are dynamically programmed matching the total size
15206 of the equipped memory (DIMM modules).
15210 commit e2ebe696818939e2b974628be9c921ea3fe9de13
15212 Date: Wed Mar 7 16:39:36 2007 +0100
15214 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
15216 This patch fixes a problem that occurs when 2 DIMM's are
15217 used. This problem was first spotted and fixed by Gerald Jackson
15219 problem in a little more clever way.
15221 This patch also adds the nice functionality to dynamically
15222 create the TLB entries for the SDRAM (tlb.c). So we should
15223 never run into such problems with wrong (too short) TLB
15224 initialization again on these platforms.
15226 As this feature is new to the "old" 44x SPD DDR driver, it
15227 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
15231 commit 39218433983417b9df087976a79e3f80dd5e83d6
15233 Date: Wed Mar 7 16:33:44 2007 +0100
15235 UC101: fix compiler warnings
15237 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
15239 Date: Wed Mar 7 16:19:46 2007 +0100
15241 HMI1001: fix build error, cleanup compiler warnings.
15243 commit ad5bb451ade552c44bef9119d907929ebc2c126f
15245 Date: Tue Mar 6 18:08:43 2007 +0100
15247 Restructure POST directory to support of other CPUs, boards, etc.
15249 commit a5284efd125967675b2e9c6ef7b95832268ad360
15251 Date: Tue Mar 6 18:01:47 2007 +0100
15253 Fix HOSTARCH handling.
15254 Patch by Mike Frysinger, Mar 05 2007
15256 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
15258 Date: Tue Mar 6 07:47:04 2007 +0100
15260 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
15262 As provided by the AMCC applications team, this patch optimizes the
15263 DDR2 setup for 166MHz bus speed. The values provided are also save
15264 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
15265 setup has to be adjusted as done in this patch.
15267 For this the NAND booting version had to include the "speed.c" file
15268 from the cpu/ppc4xx directory. With this addition the NAND SPL image
15269 will just fit into the 4kbytes of program space. gcc version 4.x as
15270 provided with ELDK 4.x is needed to generate this optimized code.
15274 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
15276 Date: Sun Mar 4 01:36:05 2007 +0100
15280 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
15282 Date: Wed Feb 28 00:02:04 2007 -0600
15284 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
15286 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
15288 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
15290 Date: Tue Feb 27 23:51:42 2007 -0600
15292 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
15294 The config value for:
15302 Were not being used when setting the appropriate register
15305 * CFG_SCCR_USBMPHCM
15310 To allow full config of the SCCR.
15312 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
15313 that were just bogus.
15317 commit d51b3cf371cd441030460ef19d36b2924c361b1a
15319 Date: Thu Feb 22 20:06:57 2007 -0600
15321 mpc83xx: update [local-]mac-address properties on UEC based devices
15323 8360 and 832x weren't updating their [local-]mac-address
15324 properties. This patch fixes that.
15328 commit 61f4f912acbe60776c5e00df1ec94094ce672957
15330 Date: Tue Feb 13 10:41:42 2007 -0600
15332 mpc83xx: write MAC address to mac-address and local-mac-address
15334 Some device trees have a mac-address property, some have local-mac-address,
15335 and some have both. To support all of these device trees, this patch
15336 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
15337 This function already updates local-mac-address.
15341 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
15343 Date: Tue Feb 27 18:41:08 2007 -0600
15345 mpc83xx: add command line editing by default
15347 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
15349 Date: Wed Feb 14 19:50:53 2007 -0600
15351 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
15353 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
15354 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
15356 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
15361 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
15363 Date: Wed Feb 14 18:27:17 2007 +0800
15365 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
15367 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
15368 it pass DDR/DDR2 compliance tests.
15372 commit b110f40bd180c6b560276589beedf753e97c46ce
15374 Date: Wed Feb 14 18:27:06 2007 +0800
15376 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
15378 MPC8360E rev2.0 have new spridr,and PVR value,
15379 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
15383 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
15385 Date: Wed Feb 14 18:26:44 2007 +0800
15387 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
15389 MPC8349E rev3.1 have new spridr,and PVR value,
15390 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
15394 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
15396 Date: Wed Jan 31 11:04:19 2007 +0100
15398 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
15400 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
15401 which is used to se if an slave will ACK after receiving its address.
15403 Correct i2c probing to use this method as the old method could upset
15404 a slave as it wrote a data byte to it.
15406 Add a small delay in i2c_init() to let the controller
15407 shutdown any ongoing I2C activity.
15411 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
15413 Date: Wed Jan 31 15:54:29 2007 -0600
15415 mpc83xx: Add support for the MPC8349E-mITX-GP
15417 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
15418 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
15419 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
15423 commit fab16807adad350f618024350c6950165c247c72
15425 Date: Wed Jan 31 15:54:20 2007 -0600
15427 mpc83xx: Delete sdram_init() for MPC8349E-mITX
15429 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
15430 never does anything. This patch deletes it.
15434 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
15436 Date: Fri Jan 19 10:43:26 2007 +0800
15438 mpc83xx: Fix the LAW1/3 bug
15440 The patch solves the alignment problem of the local bus access windows to
15441 render accessible the memory bank and PHY registers of UPC 1 (starting at
15442 0xf801 0000). What we actually did was to adjust the sizes of the bus
15443 access windows so that the base address alignment requirement would be met.
15449 commit 97c4b397dce236a7318b304667bf89e59d08b17c
15451 Date: Tue Jan 30 16:15:31 2007 -0600
15453 mpc83xx: don't hang if watchdog configured on 8360, 832x
15455 don't hang if watchdog configured on 8360, 832x
15457 The watchdog programming model is the same across all 83xx devices;
15458 make the code reflect that.
15460 commit b70047478570e371ce7223be342ce98afea0f7d6
15462 Date: Tue Jan 30 16:15:21 2007 -0600
15464 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
15466 protect memcpy to bad address if a local-mac-address is missing from dt
15468 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
15470 Date: Tue Jan 30 16:15:04 2007 -0600
15472 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
15474 make 8360 default environment fdt be 8360 (not 8349)
15476 commit a28899c910024a0226331df07207b1038c300c93
15478 Date: Tue Jan 30 16:14:50 2007 -0600
15480 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
15482 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
15483 be used for busy-waiting since it strips the 'volatile' property from
15484 the bd variable. gcc3 was working by pure luck.
15486 This is a follow on patch to "Fix the UEC driver bug of QE"
15488 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
15490 Date: Tue Jan 30 14:08:30 2007 -0600
15492 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
15494 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
15495 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
15496 CONFIG_MPC834X so they are more generic.
15500 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
15502 Date: Thu Jan 25 13:40:55 2007 -0600
15504 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
15506 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
15508 Date: Wed Jan 24 17:18:37 2007 -0600
15510 mpc83xx: sort Makefile targets
15512 reordered targets alphabetically
15514 commit 91e25769771c1164ed63ffca0add49f934ae3343
15516 Date: Tue Jan 16 11:38:14 2007 -0500
15518 mpc83xx: U-Boot support for Wind River SBC8349
15520 I've redone the SBC8349 support to match git-current, which
15521 incorporates all the MPC834x updates from Freescale since the 1.1.6
15522 release, including the DDR changes.
15524 I've kept all the SBC8349 files as parallel as possible to the
15525 MPC8349EMDS ones for ease of maintenance and to allow for easy
15526 inspection of what was changed to support this board. Hence the SBC8349
15527 U-Boot has FDT support and everything else that the MPC8349EMDS has.
15529 Fortunately the Freescale updates added support for boards using CS0,
15530 but I had to change spd_sdram.c to allow for board specific settings for
15531 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
15532 default if the board doesn't specify a value.)
15534 Hopefully this should be mergeable as-is and require no whitespace
15535 cleanups or similar, but if something doesn't measure up then let me
15536 know and I'll fix it.
15541 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
15543 Date: Thu Dec 14 19:03:21 2006 +0800
15545 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
15547 A redundant semicolon existed in mpc8349itx.c
15552 commit f35f358241c549be3f75cfe2eaa642914275b7ba
15554 Date: Wed Dec 6 21:23:55 2006 -0500
15556 mpc83xx: Put the version (and magic) after the HRCW.
15558 Put the version (and magic) after the HRCW. This puts it in a fixed
15559 location in flash, not at the start of flash but as close as we can get.
15563 commit 48aecd969171a6e99a55fae04933857787f9a5bd
15565 Date: Thu Dec 7 21:14:51 2006 +0800
15567 mpc83xx: Add the MPC832XEMDS board readme
15569 Add the MPC832XEMDS board readme
15573 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
15575 Date: Thu Dec 7 21:13:15 2006 +0800
15577 mpc83xx: Add support for the MPC832XEMDS board
15579 This patch supports DUART, ETH3/4 and PCI etc.
15583 commit e080313c32322e15ab5a18eb896a252858c57284
15585 Date: Thu Dec 7 21:11:58 2006 +0800
15587 mpc83xx: streamline the 83xx immr head file
15589 For better format and style, I streamlined the 83xx head files,
15590 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
15591 duplicated macro definition appear in the both files; 2) the structure
15592 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
15593 macro definition put inside the each structure. So, I cleaned up the
15594 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
15595 moved the macro definition to mpc83xx.h, Just like MPC8260.
15599 *streamline the 83xx immr head file
15603 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
15605 Date: Wed Dec 6 11:38:17 2006 +0800
15607 mpc83xx: Fix the UEC driver bug of QE
15609 The patch prevents the GCC tool chain from striping useful code for
15610 optimization. It will make UEC ethernet driver workable, Otherwise the
15611 UEC will fail in tx when you are using gcc4.x. but the driver can work
15612 when using gcc3.4.3.
15616 *Prevent the GCC from striping code for optimization, Otherwise the UEC
15617 will tx failed when you are using gcc4.x.
15621 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
15623 Date: Thu Mar 1 21:11:36 2007 +0100
15625 [PATCH] Update AMCC Katmai 440SPe eval board support
15627 This patch updates the recently added Katmai board support. The biggest
15628 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
15631 Please note, that still some problems are left with some memory
15632 configurations. See the driver for more details.
15636 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
15638 Date: Thu Mar 1 07:03:25 2007 +0100
15640 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
15644 commit ccbc7036648e465697ca298ba51e0e76dda352a0
15646 Date: Wed Feb 28 01:28:53 2007 +0100
15648 SC3: fix typo in default environment
15650 commit e344568b1b46af85ec32d815586f91bc115d6223
15652 Date: Tue Feb 27 20:15:30 2007 +0300
15654 MCC200: Fixes for update procedure
15656 - fix logic error in image type handling
15657 - make sure file system images (cramfs etc.) get stored in flash
15658 with image header stripped so they can be mounted through MTD
15660 commit 743571145b37182757d4e688a77860b36ee77573
15662 Date: Tue Feb 27 14:26:04 2007 +0100
15664 Minor code cleanup.
15666 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
15668 Date: Tue Feb 27 12:40:16 2007 +0300
15670 MCC200 update - add LCD Progress Indicator
15672 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
15674 Date: Thu Feb 22 07:43:34 2007 +0100
15676 [PATCH] get_dev() now unconditionally uses manual relocation
15678 Since the relocation fix is not included yet and we're not sure how
15679 it will be added, this patch removes code that required relocation
15680 to be fixed for now.
15684 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
15686 Date: Thu Feb 22 07:40:23 2007 +0100
15688 [PATCH] Change systemace driver to select 8 & 16bit mode
15690 As suggested by Grant Likely this patch enables the Xilinx SystemACE
15691 driver to select 8 or 16bit mode upon startup.
15695 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
15697 Date: Wed Feb 21 16:52:31 2007 +0100
15699 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
15701 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
15702 is fully finished. The sync() is defined in each CPU's io.h file. For
15703 those CPUs which do not need sync for now, a dummy sync() is defined in
15704 their io.h as well.
15708 commit da04995c7dc6772013a9a0dc5c767f190c402478
15710 Date: Wed Feb 21 13:44:34 2007 +0100
15712 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
15716 commit 751bb57107d78978ae08e697c3deba816f5be091
15718 Date: Tue Feb 20 13:21:57 2007 +0100
15720 [PATCH] Fix relocation problem with "new" get_dev() function
15722 This patch enables the "new" get_dev() function for block devices
15723 introduced by Grant Likely to be used on systems that still suffer
15724 from the relocation problems (manual relocation neede because of
15725 problems with linker script).
15727 Hopefully we can resolve this relocation issue soon for all platform
15728 so we don't need this additional code anymore.
15732 commit d93e2212f962668b3dce091ff5edc33f2347fe37
15734 Date: Tue Feb 20 13:17:42 2007 +0100
15736 [PATCH] Update SystemACE driver for 16bit access
15738 This patch removes some problems when the Xilinx SystemACE driver
15739 is used with 16bit access on an big endian platform (like the
15744 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
15746 Date: Tue Feb 20 13:15:40 2007 +0100
15748 [PATCH] Clean up Katmai (440SPe) linker script
15752 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
15754 Date: Tue Feb 20 10:57:08 2007 +0100
15756 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
15760 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
15762 Date: Tue Feb 20 10:51:26 2007 +0100
15764 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
15766 This patch switches to the desired I2C bus when the date/dtt
15767 commands are called. This can be configured using the
15768 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
15772 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
15774 Date: Tue Feb 20 10:43:34 2007 +0100
15776 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
15778 This patch adds support for the DDR2 controller used on the
15779 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
15780 board and works fine with the following DIMM modules:
15782 - Corsair CM2X512-5400C4 (512MByte per DIMM)
15783 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
15784 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
15786 This patch also adds the nice functionality to dynamically
15787 create the TLB entries for the SDRAM (tlb.c). So we should
15788 never run into such problems with wrong (too short) TLB
15789 initialization again on these platforms.
15793 commit 36d830c9830379045f5daa9f542ac1c990c70068
15795 Date: Tue Feb 20 10:35:42 2007 +0100
15797 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
15799 Since the existing 4xx SPD SDRAM initialization routines for the
15800 405 SDRAM controller and the 440 DDR controller don't have much in
15801 common this patch splits both drivers into different files.
15803 This is in preparation for the 440 DDR2 controller support (440SP/e).
15807 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
15809 Date: Tue Feb 20 10:27:08 2007 +0100
15811 [PATCH] PPC4xx: Add support for multiple I2C busses
15813 This patch adds support for multiple I2C busses on the PPC4xx
15814 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
15815 to make use of this feature.
15817 It also merges the 405 and 440 i2c header files into one common
15820 Also the 4xx i2c reset procedure is reworked since I experienced
15821 some problems with the first access on the 440SPe Katmai board.
15825 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
15827 Date: Tue Feb 20 09:05:45 2007 +0100
15829 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
15831 Block device read/write is anonymous data; there is no need to use a
15832 typed pointer. void * is fine. Also add a hook for block_read functions
15836 commit 53758fa20e935cc87eeb0519ed365df753a6f289
15838 Date: Tue Feb 20 09:05:38 2007 +0100
15840 [PATCH 8_9] Add block_write hook to block_dev_desc_t
15842 Preparation for future patches which support block device writing
15846 commit f4852ebe6ca946a509667eb68be42026f837be76
15848 Date: Tue Feb 20 09:05:31 2007 +0100
15850 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
15852 Register read/write does not need to be wrapped in a full function. The
15853 patch replaces them with macros.
15857 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
15859 Date: Tue Feb 20 09:05:23 2007 +0100
15861 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
15863 The code in this file is not a command; it is a device driver. Put it in
15864 the correct place. There are zero functional changes in this patch, it
15865 only moves the file.
15869 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
15871 Date: Tue Feb 20 09:05:16 2007 +0100
15873 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
15875 This patch is in preparation of additional changes to the sysace driver.
15876 May as well take this opportunity to fixup the inconsistent whitespace since
15877 this file is about to undergo major changes anyway.
15879 There are zero functional changes in this patch. It only cleans up the
15884 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
15886 Date: Tue Feb 20 09:05:07 2007 +0100
15888 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
15890 isprint is already defined in ctype.c
15894 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
15896 Date: Tue Feb 20 09:05:00 2007 +0100
15898 [PATCH 3_9] Move buffer print code from md command to common function
15900 Printing a buffer is a darn useful thing. Move the buffer print code
15901 into print_buffer() in lib_generic/
15905 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
15907 Date: Tue Feb 20 09:04:52 2007 +0100
15909 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
15911 Change the xilinx device drivers and board code to include config.h
15912 instead of xparameters.h directly. config.h always includes the
15913 correct xparameters file. This change reduces the posibility of
15914 including the wrong file when adding a new xilinx board port
15918 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
15920 Date: Tue Feb 20 09:04:34 2007 +0100
15922 [PATCH 1_4] Merge common get_dev() routines for block devices
15924 Each of the filesystem drivers duplicate the get_dev routine. This change
15925 merges them into a single function in part.c
15929 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
15931 Date: Mon Feb 19 23:09:51 2007 +0100
15933 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
15934 as root file system images.
15936 commit 489c696ae7211218961d159e43e722d74c36fcbc
15938 Date: Wed Feb 14 14:30:28 2007 +0300
15940 MCC200: Extensions to Software Update Mechanism
15942 Update / extend Software Update Mechanism for MCC200 board:
15944 - Add support for rootfs image added. The environment variables
15945 "rootfs_st" and "rootfs_nd" can be used to override the default
15946 values of the image start and end.
15947 - Remove excessive key check code.
15950 commit 4be23a12f23f1372634edc3215137b09768b7949
15952 Date: Mon Feb 19 08:23:15 2007 +0100
15954 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
15956 As spotted by Matthias Fuchs, the READY input should not be
15957 enabled for the NOR FLASH on the Sequoia board.
15961 commit 2605e90bf676d48123afe5719a846d2b52b24aac
15963 Date: Fri Feb 16 07:57:42 2007 +0100
15965 [PATCH] Added support for the jupiter board.
15969 commit 497d012e5be0194e1084073d0081eb1a844796b2
15971 Date: Mon Feb 12 13:11:50 2007 +0100
15973 LPC2292: patch from Siemens.
15975 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
15977 Date: Sat Feb 10 08:49:31 2007 +0100
15979 [PATCH] Add missing p3mx.h file to repository (ups)
15983 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
15985 Date: Fri Feb 9 10:45:42 2007 +0100
15987 [Motion-PRO] Preliminary support for the Motion-PRO board.
15989 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
15991 Date: Wed Feb 7 16:51:08 2007 +0100
15993 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
15995 Some boards that can have more than 768MBytes of SDRAM need to
15996 set "initrd_high", so that the initrd can be accessed by the
16001 commit 7372ca68227930d03cffa548310524cad5b96733
16003 Date: Fri Feb 2 12:44:22 2007 +0100
16005 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
16007 Previously the strapping DCR/SDR was read to determine if the internal PCI
16008 arbiter is enabled or not. This strapping bit can be overridden, so now
16009 the current status is read from the correct DCR/SDR register.
16013 commit 2aa54f651a42d198673318f07a20c89a43e4d197
16015 Date: Fri Feb 2 12:42:08 2007 +0100
16017 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
16021 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
16023 Date: Thu Feb 1 13:22:41 2007 +0100
16025 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
16027 When PCI PNP is enabled the pci pnp configuration routine is called
16028 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
16029 problems with some PCI cards. For now disable the PCI PNP configuration.
16033 commit 2902fadade3be7659467e8d074048c6b7068f5c0
16035 Date: Wed Jan 31 16:56:10 2007 +0100
16037 [PATCH] Update 440EPx/440GRx cpu detection
16041 commit d5ea287b02a6945c3977410e364a879dd1a555c8
16043 Date: Wed Jan 31 16:38:04 2007 +0100
16045 [PATCH] Update esd cpci5200 files
16049 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
16051 Date: Wed Jan 31 16:37:34 2007 +0100
16053 [PATCH] Add support for esd mecp5200 board
16057 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
16059 Date: Wed Jan 31 12:38:50 2007 +0100
16061 [PATCH] Remove unneccessary yellowstone board config file
16065 commit e802594b6fa1b166308820c276b96dc0d7cc731c
16067 Date: Tue Jan 30 17:06:10 2007 +0100
16069 [PATCH] Update Sequoia (440EPx) config file
16071 The config file now handles the 2nd target, the Rainier (440GRx)
16072 evaluation board better. Additionally the PPC input clock was
16073 adjusted to match the correct value of 33.0 MHz.
16077 commit 700200c67e73b83751418abe7815840dca8fd6cb
16079 Date: Tue Jan 30 17:04:19 2007 +0100
16081 [PATCH] Merge Yosemite & Yellowstone board ports
16083 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
16084 share one config file and all board specific files. This way we
16085 don't have to maintain two different sets of files for nearly
16090 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
16092 Date: Tue Jan 30 15:01:49 2007 +0100
16094 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
16096 SCPU doesn't use redundant environment in flash.
16100 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
16102 Date: Tue Jan 30 12:51:07 2007 +0100
16104 [PATCH] alpr: Update alpr board config file
16108 commit f8db84f132b1e335f20f96138a1f09ed97b08664
16110 Date: Tue Jan 30 00:50:40 2007 +0100
16112 LPC2292 SODIMM port coding style cleanup.
16114 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
16116 Date: Wed Jan 24 12:16:56 2007 +0100
16118 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
16120 commit 2daf046ba627f85f44195815778140039636244e
16122 Date: Tue Jan 23 17:22:06 2007 +0100
16124 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
16126 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
16128 Date: Tue Jan 23 14:21:14 2007 +0100
16130 [iDMR] Flash driver on initialisation write-protects some sectors,
16131 currently sectors 0-3. Sector 3 does not need to be protected, though
16132 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
16133 fixes this, i.e., only sectors 0-2 are protected.
16135 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
16137 Date: Tue Jan 23 14:11:22 2007 +0100
16139 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
16140 "mii device" results in "Unexpected exception"). Fixing this properly
16141 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
16142 this commit disables MII commads for now.
16144 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
16146 Date: Tue Jan 23 13:25:22 2007 +0100
16148 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
16149 Identification Register (CIR).
16151 commit fdef388758506765d4d6a7155c8f1584c63ff581
16153 Date: Mon Jan 22 13:19:21 2007 +0800
16155 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
16157 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
16160 commit a4012396645533aef218354eeba754dff0deace8
16162 Date: Fri Jan 19 23:08:39 2007 +0100
16164 Minor code cleanup.
16166 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
16168 Date: Fri Jan 19 19:57:10 2007 +0100
16170 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
16174 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
16176 Date: Fri Jan 19 18:05:26 2007 +0100
16178 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
16179 if you must swap the bytes between reading/writing.
16180 (Needed for the SC3 board)
16184 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
16186 Date: Thu Jan 18 16:05:47 2007 +0100
16188 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
16192 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
16194 Date: Thu Jan 18 11:54:52 2007 +0100
16196 [PATCH] Update Prodrive P3Mx support
16200 commit 34167a36c29ee946b727465db5c014746a08e978
16202 Date: Thu Jan 18 11:48:10 2007 +0100
16204 [PATCH] Add missing Taishan config file
16208 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
16210 Date: Thu Jan 18 11:28:51 2007 +0100
16212 [PATCH] Fix: Compilerwarnings for SC3 board.
16213 The EBC Configuration Register is now by CFG_EBC_CFG definable
16214 Added JFFS2 support for the SC3 board.
16218 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
16220 Date: Thu Jan 18 10:25:34 2007 +0100
16222 [PATCH] Add support for AMCC Taishan PPC440GX eval board
16226 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
16228 Date: Tue Jan 16 18:30:50 2007 +0100
16230 Raname solidcard3 into sc3; add redundant env for sc3
16232 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
16234 Date: Tue Jan 16 12:46:35 2007 +0100
16236 Update default environment for Solidcard3
16238 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
16240 Date: Mon Jan 15 09:46:29 2007 +0100
16242 [PATCH] Fix 440SPe rev B detection from previous patch
16246 commit a443d31410c571ee8f970da819a44d698fdd6b1f
16248 Date: Sun Jan 14 13:35:31 2007 +0100
16250 [FIX] correct I2C Writes for the LM81 Sensor.
16254 commit 0bba5452835f19a61204edcda3a58112fd8e2208
16256 Date: Sat Jan 13 11:17:10 2007 +0100
16258 Undo commit 3033ebb2: reset command does not take any arguments
16260 Haiying Wang's modification to the reset command was broken, undo it.
16264 commit 95981778cff0038fd9941044d6a3eda810e33258
16266 Date: Sat Jan 13 08:01:03 2007 +0100
16268 [PATCH] Update 440SP(e) cpu revisions
16270 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
16274 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
16276 Date: Sat Jan 13 07:59:56 2007 +0100
16278 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
16280 Now the board revision and the current PCI bus speed are printed after
16283 Also the EBC initialising is now done via defines in the board config
16288 commit 36adff362c2c0141ff8a810d42a7e478f779130f
16290 Date: Sat Jan 13 07:59:19 2007 +0100
16292 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
16294 Now the board revision and the current PCI bus speed are printed after
16297 Also the EBC initialising is now done via defines in the board config
16302 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
16304 Date: Sat Jan 13 07:57:51 2007 +0100
16306 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
16308 Now the board revision and the current PCI bus speed are printed after
16313 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
16315 Date: Thu Jan 11 15:44:44 2007 +0100
16317 Added support for the SOLIDCARD III board from Eurodesign
16321 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
16323 Date: Wed Jan 10 14:41:14 2007 +0100
16325 Adjusted default environment for cam5200 board.
16327 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
16329 Date: Wed Jan 10 15:35:52 2007 +0100
16333 commit 787fa15860a57833e50bd30555079a9cd4e519b8
16335 Date: Wed Jan 10 01:28:39 2007 +0100
16337 Fix auto_update for MCC200 board.
16339 The invocation of do_auto_update() is moved to the end of the
16340 misc_init_r() function, after the flash mappings have been
16341 initialized. Please find attached a patch that implements that
16344 Also correct the decoding of the keypad status. With this update, the
16345 key that will trigger the update is Column 2, Row 2.
16347 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
16349 Date: Wed Jan 10 00:26:15 2007 +0100
16351 CAM5200 flash driver modifications:
16352 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
16353 - add second build target 'cam5200_niosflash' which still uses custom driver
16355 commit 67fea022fa957f59653b5238c7496f80a6b70432
16357 Date: Tue Jan 9 16:02:48 2007 +0100
16359 SPC1920: cleanup memory contoller setup
16361 commit 8fc2102faa23593c80381437c09f7745a14deb40
16363 Date: Tue Jan 9 14:57:14 2007 +0100
16365 Fix the cpu speed setup to work with all boards.
16367 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
16369 Date: Tue Jan 9 14:57:13 2007 +0100
16371 SPC1920: add support for the FM18L08 Ramtron FRAM
16373 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
16375 Date: Tue Jan 9 14:57:13 2007 +0100
16377 SPC1920: update the HPI register addresses to work with the second
16378 generation of hardware
16380 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
16382 Date: Tue Jan 9 14:57:13 2007 +0100
16384 Miscellanious spc1920 related cleanups
16386 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
16388 Date: Tue Jan 9 14:57:12 2007 +0100
16390 SPC1920 GO/NOGO led should be set to color red in U-Boot
16392 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
16394 Date: Tue Jan 9 14:57:12 2007 +0100
16396 Add support for the DS3231 RTC
16398 commit 8139567b60d678584b05f0718a681f2047c5e14f
16400 Date: Tue Jan 9 14:57:11 2007 +0100
16402 SMC1 uses external CLK4 instead of BRG on spc1920
16404 commit d8d9de1a02fbd880b613d607143d1f57342affc7
16406 Date: Tue Jan 9 14:57:10 2007 +0100
16408 Update the SPC1920 CMB PLD driver
16410 commit 3f34f869162750e5e999fd140f884f5de952bcfe
16412 Date: Tue Jan 9 14:57:10 2007 +0100
16414 Add / enable I2C support on the spc1920 board
16416 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
16418 Date: Tue Jan 9 14:57:10 2007 +0100
16420 Add support for the tms320671x host port interface (HPI)
16422 commit f4eb54529bb3664c3a562e488b460fe075f79d67
16424 Date: Sun Jan 7 00:13:11 2007 +0100
16426 Prepare for release 1.2.0
16428 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
16430 Date: Sat Jan 6 15:58:09 2007 +0100
16432 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
16434 This patch fixes a problem with an incorrect setup for the refresh
16435 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
16439 commit f16c1da9577f06c5fc08651a4065537407de4635
16441 Date: Sat Jan 6 15:56:13 2007 +0100
16443 [PATCH] Update ALPR board files
16445 This update brings the ALPR board support to the newest version.
16446 It also fixes a problem with the NAND driver.
16450 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
16452 Date: Fri Jan 5 11:46:05 2007 +0100
16454 [PATCH] nand: Fix problem with oobsize calculation
16458 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
16459 returns a 0x15. In the code fragment below bits [1:0] determine the
16460 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
16461 next field is also ANDed with 0x3. However this is a one bit field
16462 as defined in the Hynix and Samsung parts in the 4th ID byte that
16463 determins the oobsize, not a two bit field. It works on Samsung as
16464 bits[3:2] are 01. However for the Hynix there is a 11 in these two
16465 bits, so the oob size gets messed up.
16467 I checked the correct linux code and the suggested fix from Brian is
16468 also available in the linux nand mtd driver.
16472 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
16474 Date: Fri Jan 5 10:40:36 2007 +0100
16476 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
16478 This fix will make the MAL burst disabling patch for the Linux
16479 EMAC driver obsolete.
16483 commit 023889838282b6237b401664f22dd22dfba2c066
16485 Date: Fri Jan 5 10:38:05 2007 +0100
16487 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
16489 This code will optimize the DDR2 controller setup on a board specific
16492 Note: This code doesn't work right now on the NAND booting image for the
16493 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
16497 commit cce4acbb68398634b8d011ed7bb0d12269c84230
16499 Date: Thu Dec 28 19:08:21 2006 +0100
16502 - fix a typo in V38B config file
16503 - move watchdog initialisation earlier in the boot process
16504 - add "wdt=off" to default kernel command line (disables kernel watchdog)
16506 commit 92eb729bad876725aeea908d2addba0800620840
16508 Date: Wed Dec 27 01:26:13 2006 +0100
16510 Fix bug in adaption of Stefano Babic's CFI driver patch.
16512 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
16514 Date: Sun Dec 24 01:42:57 2006 +0100
16516 Minor code cleanup.
16518 commit d784fdb05900ada3686d5778783e1fb328e9fb66
16520 Date: Tue Dec 12 00:22:42 2006 +0100
16522 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
16524 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
16526 Date: Fri Dec 22 14:29:40 2006 +0100
16528 [PATCH] Fix sequoia flash autodetection (finally correct)
16530 Now 32MByte and 64MByte FLASH is know to work and other
16531 configurations should work too.
16535 commit 82e5236a8b719543643fd26d5827938ab2b94818
16537 Date: Fri Dec 22 10:30:26 2006 +0100
16539 Minor code cleanup; update CHANGELOG.
16541 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
16543 Date: Thu Dec 21 17:17:02 2006 +0100
16545 Added support for the TQM8272 board from TQ
16549 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
16551 Date: Thu Dec 21 16:14:48 2006 +0100
16553 [PATCH] Add support for the UC101 board from MAN.
16557 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
16559 Date: Wed Dec 20 00:29:43 2006 +0100
16561 Fix to make the baudrate changes immediate for the MCF52x2 family.
16563 commit daa6e418bcc0c717752e8de939c213c790286096
16565 Date: Wed Dec 20 00:27:32 2006 +0100
16567 Preliminary support for the iDMR board (ColdFire).
16569 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
16571 Date: Fri Dec 8 16:23:08 2006 +0100
16573 automatic update mechanism
16575 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
16577 Date: Mon Dec 4 17:56:59 2006 +0800
16579 Slight code clean up.
16580 Add comments, delete duplicate define and remove spaces.
16583 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
16585 Date: Mon Dec 4 17:54:21 2006 +0800
16587 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
16588 multiplier table can not refect the real PLL clock behavior of these
16589 processors. Please refer to the hardware specification for detailed
16590 information of the corresponding processors.
16593 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
16595 Date: Mon Dec 4 14:46:23 2006 +0800
16597 Remove the static MAC address, ip address, server ip, netmask and
16598 gateway ip for network setting.
16601 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
16603 Date: Mon Dec 4 14:33:08 2006 +0800
16605 Remove the duplicate memory test code for mpc744ihpc2 board.
16606 If a memory test is needed, please use the functions in
16607 post/memory.c or memtest command.
16610 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
16612 Date: Fri Dec 1 19:01:25 2006 +0800
16614 Fix the exception occuring in RAM table search issue.
16615 The original search_one_table() function code can only processes the search
16616 for the exception occurring in FLASH/ROM, because the exception and fixup
16617 table usually locate in FLASH. If the exception address is also in
16618 FLASH, it will be OK.
16619 If the exception occurs in RAM, after the u-boot relocation, a
16620 relocation offset should be added.
16622 clean up the code in cpu/74xx_7xx/cpu.c
16626 commit ee311214e0d216f904feea269599d0934bf71f23
16628 Date: Fri Dec 1 11:47:36 2006 +0800
16630 Clean up the code according to codestyle:
16631 (1) remove some C++ comments.
16632 (2) remove trailing white space.
16633 (3) remove trailing empty line.
16634 (4) Indentation by table.
16635 (5) remove {} in one line condition.
16636 (6) add space before '(' in function call.
16637 Remove some weird printf () output.
16638 Add necessary comments.
16639 Modified Makefile to support building in a separate directory.
16641 commit dd520bf314c7add4183c5191692180f576f96b60
16643 Date: Thu Nov 30 18:02:20 2006 +0100
16647 commit 8d9a8610b8256331132227e9e6585c6bd5742787
16649 Date: Thu Nov 30 01:54:07 2006 +0100
16651 Code cleanup. Update CHANGELOG.
16653 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
16655 Date: Wed Nov 29 16:23:42 2006 +0100
16657 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
16659 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
16660 not the XLB frequency.
16662 This patch depends on the previous patches for MPC52xx device tree support
16667 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
16669 Date: Wed Nov 29 15:42:37 2006 +0100
16671 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
16673 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
16674 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
16675 quite similar and share the same board directory "prodrive/p3mx"
16676 and the same config file "p3mx.h".
16680 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
16682 Date: Wed Nov 29 12:53:15 2006 +0100
16684 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
16686 In the bootvx command the load address was only read from the env
16687 variable "loadaddr" and not optionally passed as paramter as described
16688 in the help. This is fixed with this patch. The behaviour is now the
16689 same as in the bootelf command.
16693 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
16695 Date: Wed Nov 29 12:03:57 2006 +0100
16697 [PATCH] include/ppc440.h minor error affecting interrupts
16699 Fixed include/ppc440.c for UIC address Bug
16701 Corrects bug affecting the addresses for the universal interrupt
16702 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
16707 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
16709 Date: Tue Nov 28 16:17:27 2006 -0600
16711 Make fsl-i2c not conflict with SOFT I2C
16715 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
16717 Date: Tue Nov 28 16:17:18 2006 -0600
16719 Fix I2C master address initialization.
16723 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
16725 Date: Tue Nov 28 23:31:19 2006 -0600
16727 Assign maintainers for mpc8349emds and mpc8360emds
16729 Dave for mpc8360emds, and me for mpc8349emds.
16731 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
16733 Date: Tue Nov 28 23:28:33 2006 -0600
16735 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
16737 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
16738 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
16740 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
16742 Date: Tue Nov 28 12:09:35 2006 -0600
16744 mpc83xx: Miscellaneous code style fixes
16746 Implement various code style fixes and similar changes.
16750 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
16752 Date: Tue Nov 28 17:55:49 2006 +0100
16754 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
16756 This patch adds the code and configuration necessary to boot with an
16757 arch/powerpc Linux kernel.
16762 commit e732faec95a83cb468b4850ae807c8301dde8f6a
16764 Date: Tue Nov 28 16:09:24 2006 +0100
16766 [PATCH] PPC4xx: 440SP Rev. C detection added
16770 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
16772 Date: Tue Nov 28 11:04:45 2006 +0100
16774 [PATCH] nand: Fix patch merge problem
16778 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
16780 Date: Tue Nov 28 11:04:45 2006 +0100
16782 [PATCH] nand: Fix patch merge problem
16786 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
16788 Date: Mon Nov 27 22:53:53 2006 +0100
16792 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
16794 Date: Mon Nov 27 17:43:25 2006 +0100
16796 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
16798 Patch below corrects the setting of the zmiifer register, it was
16799 overwritting the register rather than ORing the settings.
16804 commit d1a72545296800b7e219f93104ad5836f0003d66
16806 Date: Mon Nov 27 17:34:10 2006 +0100
16808 [PATCH] Select NAND embedded environment from board configuration
16810 The current NAND Bootloader setup forces the environment
16811 variables to be in line with the bootloader. This change
16812 enables the configuration to be made in the board include
16813 file instead so that it can be individually enabled.
16818 commit 15784862857c3c2214498defcfed84ff137fb81e
16820 Date: Mon Nov 27 17:22:19 2006 +0100
16822 [PATCH] nand_wait() timeout fixes
16824 Two fixes for the nand_wait() function in
16825 drivers/nand/nand_base.c:
16827 1. Use correct timeouts. The original timeouts in Linux
16828 source are 400ms and 20ms not 40s and 20s
16830 2. Return correct error value in case of timeout. 0 is
16836 commit da5553b095bf04f4f109ad7e565dae3aba47b230
16838 Date: Mon Nov 27 17:04:06 2006 +0100
16840 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
16842 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
16843 arguments to bootm. It removes the getenv("disable_of") test that used
16844 to be used for this purpose.
16849 commit a9398e018593782c5fa7d0741955fc1256b34c1e
16851 Date: Mon Nov 27 15:32:42 2006 +0100
16853 Minor code cleanup. Update CHANGELOG.
16855 commit 1729b92cde575476684bffe819d0b7791b57bff2
16857 Date: Mon Nov 27 14:52:04 2006 +0100
16859 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
16863 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
16865 Date: Mon Nov 27 14:49:51 2006 +0100
16867 [PATCH] alpr: remove unused board specific flash driver
16871 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
16873 Date: Mon Nov 27 14:48:41 2006 +0100
16875 [PATCH] 4xx: Fix problem with board specific reset code
16879 commit ec0c2ec725aec9524a177a77ce75559e644a931a
16881 Date: Mon Nov 27 14:46:06 2006 +0100
16883 [PATCH] Remove testing 4xx enet PHY setup
16887 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
16889 Date: Mon Nov 27 14:12:17 2006 +0100
16891 [PATCH] Update Prodrive ALPR board support (440GX)
16895 commit 58b485776698c3d71ec5a215e392123b4c15afa3
16897 Date: Mon Nov 27 11:51:21 2006 +0100
16899 Add a small README with information on the generic ohci driver.
16901 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
16903 Date: Mon Nov 27 11:46:46 2006 +0100
16905 Fix some endianness issues related to the generic ohci driver
16907 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
16909 Date: Mon Nov 27 11:44:58 2006 +0100
16911 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
16912 to choose between the old and the generic OHCI drivers.
16914 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
16916 Date: Mon Nov 27 11:43:09 2006 +0100
16918 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
16919 and adapted board configs TQM5200 and yosemite accordingly. This commit
16920 also makes the maximum number of root hub ports configurable
16921 (CFG_USB_OHCI_MAX_ROOT_PORTS).
16923 commit 78d620ebb5871d252270dedfad60c6568993b780
16925 Date: Thu Nov 23 22:58:58 2006 +0100
16927 Updates for TQM5200 modules:
16928 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
16929 - simplify "udate" definitions
16931 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
16933 Date: Wed Nov 22 13:20:50 2006 +0100
16935 [PATCH] PPC4xx start.S: Fix for processor errata
16937 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
16938 errata 1.12: 440_33 by moving patch up in code.
16943 commit 4ef6251403f637841000e0fef9e832aa01339822
16945 Date: Mon Nov 20 20:39:52 2006 +0100
16947 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
16951 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
16953 Date: Mon Nov 20 10:28:30 2006 +0100
16957 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
16959 Date: Mon Nov 13 13:55:24 2006 +0100
16961 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
16963 * Adds support for AMD command set Top Boot flash geometry reversal
16964 * Adds support for reading JEDEC Manufacturer ID and Device ID
16965 * Adds support for displaying command set, manufacturer id and
16966 device ids (flinfo)
16967 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
16968 * Removes outdated change history (refer to git log instead)
16973 commit b21b511d4c50408f4853f46f06b601272196223f
16975 Date: Sun Nov 12 21:13:23 2006 +0100
16979 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
16981 Date: Sat Nov 11 22:48:22 2006 +0100
16983 Disable the watchdog in the default config for the V38B board.
16985 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
16987 Date: Sat Nov 11 22:43:00 2006 +0100
16989 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
16990 group is enabled for USB earlier (in cpu_init_f() instead of
16991 usb_lowlevel_init()).
16993 commit 91650b3e4de688038d4f71279c44858e3e2c6870
16995 Date: Mon Nov 6 17:06:36 2006 +0100
16997 Sequential accesses to non-existent memory must be synchronized,
16998 at least on G2 cores.
17000 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
17002 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
17004 Date: Fri Nov 3 19:15:00 2006 -0600
17006 mpc83xx: Update 83xx to use fsl_i2c.c
17008 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
17009 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
17010 Added multiple I2C bus support to fsl_i2c.c.
17014 commit d239d74b1c937984bc519083a8e7de373a390f06
17016 Date: Fri Nov 3 12:00:28 2006 -0600
17018 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
17020 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
17021 tree matches the other 8xxx trees.
17025 commit f7fb2e703ec9688541416962724adff70a7322cb
17027 Date: Thu Nov 2 19:47:11 2006 -0600
17029 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
17031 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
17033 Date: Thu Nov 2 18:05:50 2006 -0600
17035 mpc83xx: Fix the incorrect dcbz operation
17037 The 834x rev1.x silicon has one CPU5 errata.
17039 The issue is when the data cache locked with
17040 HID0[DLOCK], the dcbz instruction looks like no-op inst.
17042 The right behavior of the data cache is when the data cache
17043 Locked with HID0[DLOCK], the dcbz instruction allocates
17046 The 834x rev3.0 and later and 8360 have not this bug inside.
17048 So, when 834x rev3.0/8360 are working with ECC, the dcbz
17049 instruction will corrupt the stack in cache, the processor will
17052 However, the 834x rev1.x can work with ECC with these code,
17053 because the sillicon has this cache bug. The dcbz will not
17054 corrupt the stack in cache.
17055 Really, it is the fault code running on fault sillicon.
17057 This patch fix the incorrect dcbz operation. Instead of
17058 CPU FP writing to initialise the ECC.
17061 * Fix the incorrect dcbz operation instead of CPU FP
17062 writing to initialise the ECC memory. Otherwise, it
17063 will corrupt the stack in cache, The processor will checkstop
17068 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
17070 Date: Wed Nov 1 00:10:40 2006 -0600
17072 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
17074 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
17075 STDOUT_PATH configuration bits to mpc8349emds,
17076 mpc8349itx, and mpc8360emds board code.
17078 redo environment to use bootm with the fdtaddr
17079 for booting ARCH=powerpc kernels by default,
17080 and provide default fdtaddr values.
17082 commit 48041365b3420589ad464ebc7752e0053538b729
17084 Date: Wed Nov 1 00:07:25 2006 -0600
17086 mpc83xx: change ft code to modify local-mac-address property
17088 Update 83xx OF code to update local-mac-address properties
17089 for ethernet instead of the obsolete 'address' property.
17091 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
17093 Date: Tue Oct 31 21:23:16 2006 -0600
17095 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
17097 This patch also adds an improved I2C set_speed(), which handles all clock
17102 commit ac4b5622ce050b5ee1e154b98df630d778661632
17104 Date: Tue Oct 31 19:54:59 2006 -0600
17106 mpc83xx: add the README.mpc8360emds
17108 add doc/README.mpc8360emds to accompany the new board support
17110 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
17112 Date: Fri Nov 3 12:11:15 2006 -0600
17114 mpc83xx: add QE ethernet support
17116 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
17118 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
17120 Date: Fri Nov 3 19:33:44 2006 -0600
17122 mpc83xx: Add MPC8360EMDS basic board support
17124 Add support for the Freescale MPC8360EMDS board.
17125 Includes DDR, DUART, Local Bus, PCI.
17127 commit 23892e49352de74f7fac36ff90bb1be143d195e3
17129 Date: Tue Oct 31 19:30:40 2006 -0600
17131 mpc83xx: add the QUICC Engine (QE) immap file
17133 common QE immap file. Also required for 8360.
17135 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
17137 Date: Tue Oct 31 19:25:38 2006 -0600
17139 mpc83xx: Add 8360 specifics to 83xx immap
17141 Mainly add QE device dependencies, with appropriate 8360 protection.
17144 commit 988833324a7fda482c8ac3ca23eb539f8232e404
17146 Date: Tue Oct 31 19:14:41 2006 -0600
17148 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
17150 PREREQUISITE PATCHES:
17152 * This patch can only be applied after the following patches have been applied:
17154 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
17155 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
17159 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
17160 the clock for the 2nd USB board (Linux kernel will hang otherwise),
17161 and fix the CONFIG_BOOTARGS macro.
17165 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
17167 Date: Tue Oct 31 18:44:42 2006 -0600
17169 mpc83xx: Add support for the MPC8349E-mITX
17171 PREREQUISITE PATCHES:
17173 * This patch can only be applied after the following patches have been applied:
17175 1) DNX#2006090742000024 "Add support for multiple I2C buses"
17176 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
17177 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
17178 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
17179 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
17183 * Add support for the Freescale MPC8349E-mITX reference design platform.
17184 The second TSEC (Vitesse 7385 switch) is not supported at this time.
17188 commit 183da6d9b446cc12123455844ad1187e2375626f
17190 Date: Tue Sep 12 10:15:53 2006 -0400
17192 Additional MPC8349 support for multibus i2c
17196 Here is a patch for a file that was accidentally left out of a previous
17199 It accompanies the patch with ticket DNX#2006090742000024
17202 Change PCI initialization to use new multi-bus I2C API.
17207 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
17209 Date: Thu Sep 7 16:51:04 2006 -0400
17211 Multi-bus I2C implementation of MPC834x
17215 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
17216 family and the MPC8349EMDS board in particular.
17217 This patch requires Patch 1 (Add support for multiple I2C buses).
17218 Testing was performed on a 533MHz board.
17220 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
17225 Implemented driver-level code to support two I2C buses on the
17226 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
17227 are 50kHz, 100kHz and 400kHz on each bus.
17232 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
17234 Date: Thu Sep 7 16:50:54 2006 -0400
17236 Add support for multiple I2C buses
17240 Attached is a patch providing support for multiple I2C buses at the
17241 command level. The second part of the patch includes an implementation
17242 for the MPC834x CPU and MPC8349EMDS board.
17244 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
17250 1. Include new 'i2c' command (based on USB implementation) using
17251 CONFIG_I2C_CMD_TREE.
17253 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
17254 the commands to change bus number and speed are only available under the
17255 new 'i2c' command mentioned in the first bullet.
17257 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
17258 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
17259 of an array of bus-device pairs. Otherwise, it is an array of uchar.
17262 Added new 'i2c' master command for all I2C interaction. This is
17263 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
17264 setting I2C bus speed as well as changing the active bus if the board
17265 has more than one (conditionally compiled with
17266 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
17272 commit bed85caf872714ebf53013967a695c9d63acfc68
17274 Date: Tue Oct 31 18:13:36 2006 -0600
17276 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
17280 * Errata DDR6, which affects all current MPC 834x processors, lists changes
17281 required to maintain compatibility with various types of DDR memory. This
17282 patch implements those changes.
17286 commit afd6e470f639883002c7c59d562690a5cb0f4865
17288 Date: Wed Oct 25 18:45:23 2006 -0500
17290 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
17292 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
17294 Date: Tue Aug 22 17:07:00 2006 -0500
17296 mpc83xx: Add support for variable flash memory sizes on 83xx systems
17300 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
17301 window registers, instead of using a hard-coded value of 8MB.
17305 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
17307 Date: Thu Aug 3 18:38:13 2006 +0800
17309 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
17311 Unified TQM834x variable names with 83xx and consolidated macro
17312 in preparation for the 8360 and other upcoming 83xx devices.
17316 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
17318 Date: Wed Oct 25 14:41:21 2006 -0500
17320 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
17322 Incorporated the common unified variable names and the changes in preparation
17323 for releasing mpc8360 patches.
17327 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
17329 Date: Thu Aug 3 18:36:02 2006 +0800
17331 mpc83xx: Fix missing build for mpc8349emds pci.c
17333 Make pci build for mpc8349emds
17337 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
17339 Date: Thu Aug 3 18:39:49 2006 +0800
17341 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
17343 Removed unused file resetvec.S for mpc83xx cpu
17347 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
17349 Date: Sat Sep 30 00:32:59 2006 -0700
17351 NAND Flash verify across block boundaries
17353 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
17355 and the write crosses a block boundary. The pointer to the verification
17356 buffer (bufstart) is not being updated to reflect the starting of the
17358 block so the verification of the second block fails.
17362 * Fix NAND FLASH page verification across block boundaries
17364 commit f484dc791a3932537213c43c654cc1295c64b84c
17366 Date: Thu Sep 7 07:39:46 2006 -0700
17368 Added RGMII support to the TSECs and Marvell 881111 Phy
17370 Added a phy initialization to adjust the RGMII RX and TX timing
17371 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
17375 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
17377 Date: Fri Nov 3 13:10:00 2006 +0800
17379 Remove some unused CFG define.
17380 undef CFG_DRAM_TEST
17382 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
17384 Date: Fri Nov 3 13:07:36 2006 +0800
17386 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
17387 Both work. 0xFF000000 seems more reasonable.
17389 commit c59200443072353044aa4bf737a5a60f9a9af231
17391 Date: Thu Nov 2 15:15:01 2006 +0100
17393 Release U-Boot 1.1.6
17395 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
17397 Date: Thu Nov 2 19:14:48 2006 +0800
17399 This patch comes from Yuli's posted patch on 8/8/2006
17400 titled "CFI Driver Little-Endian write Issue".
17402 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
17404 If that patch applied, please discard this one.
17405 Until now , I do not see his patch is applied. So please apply this one.
17410 commit b825f158e449e1e9cf74c08e572955e122394c96
17412 Date: Thu Nov 2 19:12:31 2006 +0800
17414 Tsi108 on chip i2c support.
17416 The i2c Interface provides a master-only, serial interface that can be
17417 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
17423 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
17425 Date: Thu Nov 2 19:11:06 2006 +0800
17427 Tsi108 on chip pci controller support.
17429 If there is no pci card, the tsi108/109 pci configure read will
17430 cause a machine check exception to the processor. PCI error should
17431 also be cleared after the read.
17436 commit d1927cee977126e547ceeba23e4f978f377cfb8f
17438 Date: Thu Nov 2 19:08:55 2006 +0800
17440 Tundra tsi108 on chip Ethernet controller support.
17442 The following is a brief description of the Ethernet controller:
17443 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
17444 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
17445 to manage the two physical connection devices (PHYs). Each Ethernet port
17446 has its own statistics monitor that tracks and reports key interface
17447 statistics. Each port supports a 256-entry hash table for address
17448 filtering. In addition, each port is bridged to the Switch Fabric
17449 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
17451 Each Ethernet port also has a pair of internal Ethernet DMA channels to
17452 support the transmit and receive data flows. The Ethernet DMA channels
17453 use descriptors set up in memory, the memory map of the device, and
17454 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
17455 handles arbitration for the Switch Fabric. The Controller also
17456 has a register businterface for register accesses and status monitor
17459 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
17460 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
17461 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
17462 data flows to and from the Ethernet Controller through the Switch Fabric.
17464 Each Ethernet port uses its transmit and receive DMA channels to manage
17465 data flows through buffer descriptors that are predefined by the
17466 system (the descriptors can exist anywhere in the system memory map).
17467 These descriptors are data structures that point to buffers filled
17468 with data ready to transmit over Ethernet, or they point to empty
17469 buffers ready to receive data from Ethernet.
17474 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
17476 Date: Thu Nov 2 19:01:33 2006 +0800
17478 Tundra tsi108 header file.
17480 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
17481 PowerPC processors that offers numerous system interconnect options for
17482 embedded application designers. The Tsi108 can interconnect 60x or
17483 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
17484 and Flash. Provided the macro define for tsi108 chip.
17489 commit 87c4db09699c6b89176b31004afcb83eb1585d47
17491 Date: Thu Nov 2 18:59:15 2006 +0800
17493 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
17494 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
17499 commit 27801b8ab11c61b577e45742a515bb3b23b80241
17501 Date: Thu Nov 2 18:57:21 2006 +0800
17503 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
17504 Make ,config.mk and link file for the mpc7448hpc2 board.
17509 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
17511 Date: Thu Nov 2 18:55:04 2006 +0800
17513 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
17514 The mpc7448hpc2 board support header file.
17519 commit 625bb5ddb50b243f931262ca8c46956409471917
17521 Date: Thu Nov 2 18:52:21 2006 +0800
17523 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
17524 The mpc7448hpc2 board support low level assemble language init code.
17529 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
17531 Date: Thu Nov 2 18:49:51 2006 +0800
17533 General code modification for mpc7448hpc2 board support.
17534 1. Add 7447A and 7448 processor support.
17535 2. Add the following flags.
17537 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
17538 (such as by switch on board), this flag should be set.
17540 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
17541 relocates to RAM, this flag should be set.
17543 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
17544 system hang in exception, this flag should be set.
17546 There is a design issue for tsi108/109 pci configure read. When pci scan
17547 the slots, if there is no pci card, the tsi108/9 will cause a machine
17548 check exception for mpc7448 processor.
17553 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
17555 Date: Thu Nov 2 18:34:47 2006 +0800
17557 Add README file for mpc7448hpc2 board.
17560 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
17562 Date: Wed Nov 1 02:04:38 2006 +0100
17564 Finish up support for MarelV38B board
17565 - add watchdog support
17566 - enable GPIO_WKUP_7 pin for input
17569 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
17571 Date: Wed Nov 1 01:45:46 2006 +0100
17573 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
17574 * remove warnings when compiling ethaddr.c
17575 * adjust linker script (fixes a crash resulting from incorrect
17576 definition of __u_boot_cmd_start)
17577 - Some MarelV38B code cleanup.
17579 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
17581 Date: Wed Nov 1 01:38:16 2006 +0100
17583 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
17584 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
17585 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
17586 MPC5XXX_WU_GPIO_DATA_O for affected boards.
17588 - Add defintions for some MPC5XXX GPIO pins.
17590 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
17592 Date: Wed Nov 1 01:34:29 2006 +0100
17594 Changed MarelV38B board make target to lowercase. Config file cleanup.
17596 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
17598 Date: Sun Oct 29 01:03:51 2006 +0200
17600 Automatically adjust ARFLAGS so "make -s" is really silent.
17602 commit fae684e89844856383bdf101440889557df3e6b1
17604 Date: Sat Oct 28 16:45:00 2006 +0200
17606 [PATCH] omap925.c: Remove unused functions
17611 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
17613 Date: Sat Oct 28 17:12:58 2006 +0200
17615 [PATCH] Add some missing machtypes for netstar & voiceblue boards
17617 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
17623 commit 856f054410cef52d868feb330168b2a4c4091328
17625 Date: Sat Oct 28 15:55:52 2006 +0200
17627 [PATCH] NAND: Partition name support added to NAND subsystem
17629 chpart, nboot and NAND subsystem related commands now accept also partition
17630 name to specify offset.
17635 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
17637 Date: Sat Oct 28 02:29:44 2006 +0200
17641 commit 2751a95abd1b96911081c357e96a12fa97b40dee
17643 Date: Sat Oct 28 02:29:14 2006 +0200
17645 Enable commandline editing and hush shell on all TQM boards.
17647 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
17649 Date: Sat Oct 28 02:28:02 2006 +0200
17651 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
17653 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
17655 Date: Sat Oct 28 01:14:32 2006 +0200
17657 Check for illegal character '=' in environment variable names.
17659 Make sure the string passed as variable name does not contain a '='
17660 character. This not only prevents the common error or typing
17661 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
17662 also closes a backdoor which allowed to delete write-protected
17663 environment variables, for example by using "setenv ethaddr=".
17665 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
17667 Date: Sat Oct 28 00:38:39 2006 +0200
17669 Minor code cleanup.
17671 commit e11887a77d81077416a2d1c5e0354916fee8c034
17673 Date: Thu Oct 26 17:55:31 2006 +0200
17675 Don't pass any debug options directly to the assembler
17677 When passing the -g option to gcc, gcc automatically selects a
17678 suitable --g<format> option to pass on to the assembler.
17679 Thus, there's no point in forcing a specific debug option on the
17680 assembler using the -Wa mechanism.
17684 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
17686 Date: Fri Oct 27 07:47:22 2006 -0500
17688 MPC86xx: Cleaned up unused and conditionally used local variables.
17692 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
17694 Date: Fri Oct 27 11:55:21 2006 +0200
17696 Fix "ar" flags in some Makefiles to allow for silent "make -s"
17698 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
17700 Date: Thu Oct 26 14:38:25 2006 -0400
17702 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
17703 to a TSEC (e.g. a switch is connected via RMII) or
17704 if the PHY is defective/incorrectly configured.
17708 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
17710 Date: Thu Oct 26 14:38:25 2006 -0400
17712 Fix TSEC driver: avoid crashes if PHY is not attached
17713 to a TSEC (e.g. a switch is connected via RMII) or
17714 if the PHY is defective/incorrectly configured.
17718 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
17720 Date: Thu Oct 26 16:24:31 2006 +0200
17724 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
17726 Date: Wed Oct 25 15:48:59 2006 +0200
17728 Finish up support for the ATSTK1000/ATSTK1002 boards
17730 Add atstk1002_config target to Makefile and move the AVR32 section
17731 down below Blackfin so that it doesn't end up in the middle of
17734 Drop the autogenerated linker script thing for now. Will have to
17735 revisit how to handle chips with different flash and RAM layout
17740 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
17742 Date: Tue Oct 24 23:47:37 2006 -0500
17744 Added support for Multi-Image files that contain a device tree
17746 If a Multi-Image file contains a third image we try to use it as a
17747 device tree. The device tree image is assumed to be uncompressed in the
17748 image file. We automatically allocate space for the device tree in memory
17749 and provide an 8k pad to allow more than a reasonable amount of growth.
17751 Additionally, a device tree that was contained in flash will now automatically
17752 get copied to system memory as part of boot. Previously an error was
17753 reported if one tried to boot a device tree that was in flash.
17757 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
17759 Date: Tue Oct 24 21:35:55 2006 +0200
17761 Switch to automatically generated CHANGELOG file.
17762 (use "make CHANGELOG" to update it from time to time)
17764 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
17766 Date: Tue Oct 24 18:06:48 2006 +0200
17768 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
17769 Patch by Stefan Roese, 24 Oct 2006
17771 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
17773 Date: Tue Oct 24 17:24:55 2006 +0200
17775 Merge with /home/wd/git/u-boot/master
17777 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
17779 Date: Tue Oct 24 15:32:57 2006 +0200
17783 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
17785 Date: Tue Oct 24 14:51:36 2006 +0200
17787 Move atstk1000 files into vendor specific directory.
17788 Patch by Haavard Skinnemoen, 12 Sep 2006
17790 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
17792 Date: Tue Oct 24 14:42:37 2006 +0200
17794 Add ATSTK1000 and ATSTK1002 board support
17795 Patch by Haavard Skinnemoen, 06 Sep 2006
17797 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
17800 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
17801 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
17802 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
17803 CompactFlash cards. For more information, please see this page:
17805 http://www.atmel.com/dyn/products/tools.asp?family_id=682
17807 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
17812 commit f93ae788c3640fcde5db383471d45548ff4060d0
17814 Date: Tue Oct 24 14:31:24 2006 +0200
17816 Add common serial driver for Atmel AT32 and AT91 chips
17817 Patch by Haavard Skinnemoen, 06 Sep 2006
17819 This is a first attempt at creating a common serial driver for Atmel
17820 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
17821 be possible to support AT91RM9200 and other ARM-based chips with some
17822 minor modifications.
17824 There's nothing fundamentally AVR32-specific in this driver, but it
17825 does use some features which are currently only defined for the
17827 * pm_get_clock_freq: Obtain the clock frequency of a given domain
17828 * gd->console_uart: A "struct device" containing information about
17829 register mappings, gpio resources and clocks associated with the
17832 For more information about these features, please see the "AT32AP
17835 commit 72a087e04705c26cad982879ebd06b5281bf825a
17837 Date: Tue Oct 24 14:27:35 2006 +0200
17839 Add AT32AP CPU and AT32AP7000 SoC support
17840 Patch by Haavard Skinnemoen, 06 Sep 2006
17842 This patch adds support for the AT32AP CPU family and the AT32AP7000
17843 chip, which is the first chip implementing the AVR32 architecture.
17845 The AT32AP CPU core is a high-performance implementation featuring a
17846 7-stage pipeline, separate instruction- and data caches, and a MMU.
17847 For more information, please see the "AVR32 AP Technical Reference":
17849 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
17851 In addition to this, the AT32AP7000 chip comes with a large set of
17852 integrated peripherals, many of which are shared with the AT91 series
17853 of ARM-based microcontrollers from Atmel. Full data sheet is
17856 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
17860 commit 7b64fef33c66be648826c0ff9758298ef13d0604
17862 Date: Tue Oct 24 14:21:16 2006 +0200
17864 Add AVR32 architecture support
17865 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
17867 This patch adds common infrastructure code for the Atmel AVR32
17868 architecture. See doc/README.AVR32 for details.
17872 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
17874 Date: Tue Oct 24 13:57:33 2006 +0200
17876 Use -g instead of -gstabs in AFLAGS_DEBUG
17877 Patch by Haavard Skinnemoen, 30 Aug 2006
17879 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
17880 matter what the target's preferred debugging format is. This patch
17881 simply replaces -gstabs with -g, so that the default debugging format
17882 for the architecture is used.
17884 commit 965829872169c2996023840d98e1d85ad148d629
17886 Date: Tue Oct 24 13:55:18 2006 +0200
17888 Fix/workaround broken dependency handling with make 3.81
17889 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
17891 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
17893 Date: Mon Oct 23 22:17:05 2006 +0200
17895 Fix sequoia separate object direcory building problems.
17897 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
17899 Date: Fri Oct 20 17:16:35 2006 -0500
17901 Use generic I2C register block on 85xx and 86xx.
17903 Replace private IMMAP I2C structures with generic reg block
17904 and allow 86xx to have multiple I2C device busses.
17908 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
17910 Date: Fri Oct 20 15:54:34 2006 -0500
17912 Fix compilation warnings on a few 85xx boards.
17916 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
17918 Date: Fri Oct 20 15:50:15 2006 -0500
17920 Converted all 85xx boards to use a common FSL I2C driver.
17921 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
17922 And removed hard i2c path from a few u-boot.lds scipts too.
17923 Minor whitespace cleanups along the way.
17927 commit 4d45f69e362b05892c9e92a7907e5820995612aa
17929 Date: Thu Oct 19 12:02:24 2006 -0500
17931 Rewrite a series of goto statements as a sequences of
17932 conditional expressions instead.
17934 Use consistent return code 0/-1 for good/bad indicators.
17936 Include one fewer file if the driver isn't used at all.
17940 commit 7237c033b02fe295880435f1eb80819a0c987532
17942 Date: Thu Oct 19 11:02:16 2006 -0500
17944 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
17946 in an effort to begin to unify the umpteen FSL I2C drivers that
17947 are all otherwise very similar.
17951 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
17953 Date: Thu Oct 19 11:33:52 2006 -0500
17955 * Fix a bunch of compiler warnings for gcc 4.0
17959 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
17961 Date: Tue Oct 17 06:14:31 2006 +0200
17963 Add monitor functions for indirect access to PPC440 DCR's
17964 Patch by Leonid Baryudin, 12 Oct 2006
17966 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
17968 Date: Fri Oct 13 16:47:53 2006 -0500
17970 Fixed leading whitespace issues.
17971 Removed spurious LAWAR thing.
17975 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
17977 Date: Thu Oct 12 10:42:36 2006 -0500
17979 Remove unneeded include files and local variable.
17983 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
17985 Date: Tue Oct 10 00:23:32 2006 -0600
17987 Fix possible uninitialized variable compiler warning.
17989 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
17990 do_bootm_linux() may be uninitialized. There is no possibility in the
17991 current code that len will get used uninitialized, but this fix follows
17992 the existing convention of setting both len and data to zero at the same
17997 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
17999 Date: Wed Oct 11 15:13:01 2006 -0500
18001 * Fix a bunch of compiler warnings for gcc 4.0
18005 commit bf651baa365e5447246aad6a633ccd667cf24a39
18007 Date: Wed Oct 11 10:10:43 2006 -0500
18009 Move "ar" flags to config.mk to allow for silent "make -s"
18011 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
18013 Date: Tue Oct 10 17:19:03 2006 -0500
18015 Coding style changes to remove local varible blocks
18016 and reformat a bit nicer.
18018 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
18020 Date: Tue Oct 10 17:16:04 2006 -0500
18022 Fix whitespace issues.
18024 commit 7b382b7125f2397cce63253df62f183e3dfa2770
18026 Date: Tue Oct 10 17:14:45 2006 -0500
18028 Fix whitespace issues.
18030 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
18032 Date: Tue Oct 10 17:06:53 2006 -0500
18034 Fix whitespace issues.
18036 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
18038 Date: Tue Oct 10 17:03:43 2006 -0500
18040 Ran lindent and cleaned up whitespace issues.
18041 Format for 80-columns too.
18043 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
18045 Date: Tue Oct 10 17:02:22 2006 -0500
18047 Fix whitespace and 80-col issues.
18049 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
18051 Date: Sat Oct 7 11:36:51 2006 +0200
18053 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
18054 Patch by Stefan Roese, 07 Oct 2006
18056 commit 5bc528fa4da751d472397b308137238a6465afd2
18058 Date: Sat Oct 7 11:35:25 2006 +0200
18060 Update ALPR code (NAND support working now)
18061 Patch by Stefan Roese, 07 Oct 2006
18063 commit 77d5034847d328753b80c46b83f960a14a26f40e
18065 Date: Sat Oct 7 11:33:03 2006 +0200
18067 Remove compile warnings in fpga code
18068 Patch by Stefan Roese, 07 Oct 2006
18070 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
18072 Date: Sat Oct 7 11:30:52 2006 +0200
18074 Add CONFIG_BOARD_RESET to configure board specific reset function
18075 Patch by Stefan Roese, 07 Oct 2006
18077 commit f55df18187e7a45cb73fec4370d12135e6691ae1
18079 Date: Fri Sep 29 08:23:12 2006 +0100
18081 Fix missing tCycle/modfreq calculation.
18085 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
18087 Date: Wed Sep 13 10:33:35 2006 -0500
18089 Updated config headers to add default FDT-based booting
18091 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
18093 Date: Wed Sep 13 10:34:18 2006 -0500
18095 Add support for eTSEC 3 & 4 on 8548 CDS
18097 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
18098 This will only work on rev 1.3 boards (but doesn't break older boards)
18099 * Cleaned up some comments to reflect the expanded role of tsec
18102 commit 084d648b109c8984f83674043c1a7fa3885ef801
18104 Date: Wed Sep 13 10:33:56 2006 -0500
18106 Added code to support 2.6.18 PCI changes in u-boot
18108 * Added code to swizzle the IRQ map for the PCI
18110 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
18112 Date: Tue Sep 19 09:34:10 2006 -0500
18114 Modified makefile for new build mechanism.
18118 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
18120 Date: Thu Sep 14 08:40:36 2006 -0500
18122 Handle 86xx SVR values according to the new Reference Manual.
18123 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
18124 by the byte in bits 16-23 instead.
18125 Thanks to Jason Jin for noticing.
18129 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
18131 Date: Mon Aug 28 14:25:31 2006 +0800
18133 Fixed an OF-tree off-by-one bug when adding a new property name.
18134 This bug will cause the kernel booting to pause a long time.
18137 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
18139 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
18141 Date: Tue Aug 29 11:05:09 2006 -0500
18143 Remove trailing empty lines.
18145 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
18147 Date: Tue Aug 29 09:48:49 2006 -0500
18149 Remove bogus msync and use volatile asm.
18151 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
18153 Date: Tue Aug 29 08:17:14 2006 -0500
18155 Add myself as maintainer for MPC8641HPCN.
18157 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
18159 Date: Mon Aug 28 14:25:31 2006 +0800
18161 Fixed an OF-tree off-by-one bug when adding a new property name.
18162 This bug will cause the kernel booting to pause a long time.
18166 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
18168 Date: Fri Aug 25 14:38:34 2006 -0400
18170 Change ramdiskaddr and dtbaddr
18171 Remove PEX fluff commands.
18176 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
18178 Date: Wed Aug 23 13:32:45 2006 -0500
18180 * Another small fix for booting with disable_of
18184 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
18186 Date: Wed Aug 23 11:04:43 2006 -0500
18188 Cleanup and lindent new AHCI driver.
18190 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
18192 Date: Wed Aug 23 19:15:12 2006 +0800
18194 Add AHCI define and sata support for MPC8641HPCN board.
18198 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
18200 Date: Wed Aug 23 19:10:44 2006 +0800
18202 Add AHCI support to u-boot
18204 Add AHCI support in u-boot, enable the sata disk controllers which
18205 following the AHCI protocol.
18209 commit d8ea2acf5f137cae99417df4f573d036ee384668
18211 Date: Wed Aug 23 17:54:32 2006 +0800
18213 Add dtb boot-up parameter to default boot commands.
18217 commit b93775c2036b99baa390ea425c4771895bbc63c4
18219 Date: Tue Aug 22 18:26:08 2006 -0500
18221 Cleanup even more poorly introduced whitespace.
18223 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
18225 Date: Tue Aug 22 18:07:00 2006 -0500
18227 Cleanup more poorly introduced whitespace.
18229 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
18231 Date: Tue Aug 22 17:54:05 2006 -0500
18233 Cleanup poorly introduced whitespace.
18235 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
18237 Date: Tue Aug 22 12:25:27 2006 -0500
18239 General indent and whitespace cleanups.
18241 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
18243 Date: Tue Aug 22 12:06:18 2006 -0500
18245 General indent and whitespace cleanups.
18247 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
18249 Date: Tue Aug 22 10:42:21 2006 -0500
18251 Cleanup compiler warnings.
18253 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
18255 Date: Tue Aug 22 09:31:59 2006 -0500
18257 Fix disable_of booting
18261 commit 87a449c8ac396420cb24260f717ea9e6faa82047
18263 Date: Tue Aug 22 09:23:55 2006 -0500
18265 Support for FDT in uImage format, error when using FDT from flash
18269 commit 75c299c38369d01addd5e054b8a16217b70f4a86
18271 Date: Tue Aug 15 15:12:55 2006 -0400
18273 Unlock cache before kernel starts up for MPC86xx
18275 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
18277 Date: Tue Aug 15 15:13:15 2006 -0400
18279 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
18281 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
18283 Date: Tue Aug 15 15:12:55 2006 -0400
18285 Unlock cache before kernel starts up for MPC86xx
18287 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
18289 Date: Tue Aug 15 15:13:15 2006 -0400
18291 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
18293 commit 86c8e17f25e972a7e272950a0735fad84e082b88
18295 Date: Wed Aug 16 13:59:47 2006 -0500
18297 * Fix disable_of booting
18301 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
18303 Date: Wed Aug 16 10:54:09 2006 -0500
18305 * Support for FDT in uImage format, error when using FDT from flash
18309 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
18311 Date: Tue Aug 15 14:22:35 2006 +0200
18313 Add initial support for the ALPR board from Prodrive
18314 NAND needs some additional testing
18315 Patch by Heiko Schocher, 15 Aug 2006
18317 commit f0ff4692ff3372dec55074a8eb444943ab095abb
18319 Date: Tue Aug 15 14:15:51 2006 +0200
18321 Add FPGA Altera Cyclone 2 support
18322 Patch by Heiko Schocher, 15 Aug 2006
18324 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
18326 Date: Mon Aug 14 15:33:38 2006 -0500
18328 Fix BAT0 to actually be cacheable, non-guarded as documented.
18332 commit 40bc83559db5745681909fd7382ae509567e116d
18334 Date: Wed Aug 9 15:32:16 2006 -0500
18336 Removed MPC8641HPCN DTS source file from build.
18337 It is no longer linked into U-Boot; its sources are
18338 now located in the kernel tree.
18342 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
18344 Date: Wed Jun 28 10:47:03 2006 -0500
18346 * Switched default PCI speed for 8540 ADS back to 33MHz
18348 * Added comments and a printf to warn that PCI-X won't
18350 Patch by Andy Fleming 17-Mar-2006
18354 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
18356 Date: Wed Jun 28 10:46:35 2006 -0500
18358 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
18362 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
18364 Date: Wed Jun 28 10:46:13 2006 -0500
18366 * Added VIA configuration table
18368 * Added support for PCI2 on CDS
18369 Patch by Andy Fleming 17-Mar-2006
18373 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
18375 Date: Wed Jun 28 10:45:41 2006 -0500
18377 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
18381 commit 97074ed9655309b64231bc2cee69fe85399f8055
18383 Date: Wed Jun 28 10:45:17 2006 -0500
18385 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
18389 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
18391 Date: Wed Jun 28 10:44:49 2006 -0500
18393 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
18397 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
18399 Date: Wed Jun 28 10:44:23 2006 -0500
18401 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
18405 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
18407 Date: Wed Jun 28 10:43:36 2006 -0500
18409 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
18413 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
18415 Date: Wed Jun 28 10:43:00 2006 -0500
18417 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
18419 commit 5498d90312aad9f6bdbf047986027c35b03cd163
18421 Date: Wed Jun 28 10:42:24 2006 -0500
18423 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
18425 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
18427 Date: Wed Jun 28 10:41:37 2006 -0500
18429 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
18431 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
18433 Date: Wed Aug 9 14:33:50 2006 +0100
18435 Add Rapidio support for the MPC8641HPCN
18439 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
18441 Date: Tue Aug 8 11:32:43 2006 +0100
18443 Fix caslat calculation
18447 commit 709d3073e74153278e7904a70819bbef7df50e1a
18449 Date: Thu Aug 3 16:17:56 2006 -0500
18451 Convert to mac-address in ethernet nodes.
18453 commit 71748af833ca1017edf1415be376366ff2937d17
18455 Date: Fri Jul 28 12:41:35 2006 -0400
18457 Correct the irq value of DUART2
18459 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
18461 Date: Fri Jul 28 12:41:41 2006 -0400
18463 Change the space size of PEX IO in README
18465 commit 239db37c94f7a92941c4465feceb867c609241c5
18467 Date: Fri Jul 28 12:41:18 2006 -0400
18469 Move get_board_sys_clk to board directory
18471 commit 492900b985439fbce1a118afde1e35def870db03
18473 Date: Fri Jul 28 09:03:54 2006 +0100
18475 Fix 8641HPCN pollution
18477 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
18479 Date: Fri Jul 28 08:16:06 2006 +0100
18481 Fix 8641HPCN timebase
18483 commit c86360b830f1eecd7a72208575dde4f57879faea
18485 Date: Fri Jul 28 00:01:34 2006 +0800
18487 Fixed OF device tree of mpc86xxhpcn board.
18489 The changes works in with kernel irq mapping rework.
18493 commit bea3f28d285942bf3f7ab339ce85178ded544225
18495 Date: Wed Jul 12 10:48:05 2006 -0400
18497 Add support for reading and writing mac addresses to or from ID EEPROM.
18499 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
18500 With attached patch, we can use command "mac/mac read/mac save/"
18501 to read and write EEPROM under u-boot prompt.
18503 U-boot will calculate the checksum of EEPROM while bootup,
18504 if it is right, then u-boot will check whether the mac address
18505 of eTSEC0/1/2/3 is availalbe (non-zero).
18507 If there is mac address availabe in EEPROM, u-boot will use it,
18508 otherewise, u-boot will use the mac address defined in
18509 MPC8641HPCN.h. This matches the requirement to set unique mac address
18510 for each TSEC port.
18515 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
18517 Date: Thu Jul 13 10:35:10 2006 -0500
18519 Fixed initrd issue by define big RAM
18523 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
18525 Date: Fri Jul 7 10:01:45 2006 -0500
18527 We made a u-boot patch to fix the hang up issue
18528 when booting filesystem from ramdisk.
18532 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
18534 Date: Wed Jun 28 10:47:03 2006 -0500
18536 * Switched default PCI speed for 8540 ADS back to 33MHz
18537 * Added comments and a printf to warn that PCI-X won't
18539 Patch by Andy Fleming 17-Mar-2006
18543 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
18545 Date: Wed Jun 28 10:46:35 2006 -0500
18547 * Fixed a bug where 8555 PCI code used the old variable and
18549 Patch by Andy Fleming 17-Mar-2006
18553 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
18555 Date: Wed Jun 28 10:46:13 2006 -0500
18557 * Added VIA configuration table
18558 * Added support for PCI2 on CDS
18559 Patch by Andy Fleming 17-Mar-2006
18563 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
18565 Date: Wed Jun 28 10:45:41 2006 -0500
18567 * Fixed PCI memory definitions
18568 Patch by Andy Fleming 17-Mar-2006
18572 commit 087454609e47295443af793a282cddcd91a5f49c
18574 Date: Wed Jun 28 10:45:17 2006 -0500
18576 * Added support for initializing second PCI bus on 85xx
18577 Patch by Andy Fleming 17-Mar-2006
18581 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
18583 Date: Wed Jun 28 10:44:49 2006 -0500
18585 * Added PCI-X #defines for PCI-X initialization
18586 Patch by Andy Fleming on 17-Mar-2006
18590 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
18592 Date: Wed Jun 28 10:44:23 2006 -0500
18594 * Made sure the code which disables prefetch for PCI devices
18595 sets the size of the prefetch region to 0
18596 Patch by Andy Fleming on 17-Mar-2006
18600 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
18602 Date: Wed Jun 28 10:43:36 2006 -0500
18604 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
18605 Patch by Jon Loeliger 17-Jan-2006
18609 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
18611 Date: Wed Jun 28 10:43:00 2006 -0500
18613 * Removed the oftree.dts for stxxtx in light of the changes
18614 to the flat device tree handling code
18615 Patch by Matthew McClintock 26-June-2006
18617 commit 1b380ec225665e73959677f3893dc658c5925e05
18619 Date: Wed Jun 28 10:42:24 2006 -0500
18621 * Patch to modify ft_build.c to update flat device trees in place
18622 Patch by Matthew McClintock 26-June-2006
18624 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
18626 Date: Wed Jun 28 10:41:37 2006 -0500
18628 * Modify bootm command to support booting with flat device trees
18629 Patch by Matthew McClintock 26-June-2006
18631 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
18633 Date: Wed Jun 28 08:43:56 2006 -0500
18635 Change Id to symbolic name for RTL8139
18639 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
18641 Date: Tue Jun 27 18:12:10 2006 +0800
18643 Fix RTL8139 in big endian
18648 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
18650 Date: Tue Jun 27 18:12:23 2006 +0800
18652 Fix Tsec bug when no link
18654 When tftp a non-exist file from the tftp server, u-boot will check
18655 the link of all eth port. The original file will return wrong link
18656 state on the no link ports.
18660 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
18662 Date: Tue Jun 27 18:12:02 2006 +0800
18664 Fix bug for io_bar size during pci scan
18666 During the pci scan process, Some devices return bar_reponse with the
18667 highest bytes 0, such as the pci bridge in uli1575 return bar_response
18668 with 0xffffff, So the bar_size should be manually set under 64K.
18672 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
18674 Date: Tue Jun 27 18:11:54 2006 +0800
18676 Enable PCIE1 for MPC8641HPCN board
18680 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
18682 Date: Mon Jun 26 11:06:00 2006 +0200
18686 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
18688 Date: Thu Jun 22 08:51:46 2006 -0500
18690 Fix bug in 8641hpcn reset command with no args.
18695 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
18697 Date: Tue Jun 20 17:47:15 2006 +0800
18699 Reworked IRQ mapping in OF-tree.
18701 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
18703 Date: Thu Jun 15 21:33:37 2006 -0500
18705 Do not enable address translation on secondary CPUs.
18706 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
18710 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
18712 Date: Wed Jun 14 18:14:56 2006 +0200
18716 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
18718 Date: Wed Jun 14 17:45:53 2006 +0200
18720 Various USB related patches
18721 - Add support for mpc8xx USB device.
18722 - Add support for Common Device Class - Abstract Control Model USB console.
18723 - Add support for flow control in USB slave devices.
18724 - Add support for switching between gserial and cdc_acm using environment.
18725 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
18726 - Update usbcore slightly to ease host enumeration.
18727 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
18728 - Add AdderUSB_config as a defconfig to enable usage of the USB console
18729 by default with the Adder87x U-Boot port.
18732 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
18734 Date: Wed Jun 7 10:53:55 2006 -0500
18736 Fix a get_board_sys_clk() use-before-def warning.
18740 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
18742 Date: Wed Jun 7 10:52:49 2006 -0500
18744 Allow DTC path to be passed in.
18748 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
18750 Date: Tue Jun 6 16:54:29 2006 -0400
18752 Modify the IRQ of DUART2
18754 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
18756 Date: Wed May 31 13:55:35 2006 -0500
18762 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
18764 Date: Wed May 31 12:44:44 2006 -0500
18766 White space cleanup.
18767 Some 80-column cleanups.
18768 Convert printf() to puts() where possible.
18769 Use #include "spd_sdram.h" as needed.
18770 Enhanced reset command usage message a bit.
18774 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
18776 Date: Wed May 31 11:39:34 2006 -0500
18778 Removed unneeded local_bus_init() from 8641HPCN board.
18782 commit 4d3d729c16c392d2982d3266b659d333c927697d
18784 Date: Wed May 31 11:24:28 2006 -0500
18786 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
18790 commit b2a941de060350ad15878d8219825f4950e9bb8e
18792 Date: Wed May 31 10:07:28 2006 -0500
18794 Remove dead debug code.
18798 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
18800 Date: Tue May 30 17:47:00 2006 -0500
18802 Move mpc86xx PIXIS code to board directory
18804 First cut at moving the PIXIS platform code out of
18805 the 86xx cpu directory and into board/mpc8641hpcn
18810 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
18812 Date: Tue May 30 16:56:14 2006 +0200
18814 Support generic OHCI support for the s3c24x0 cpu.
18816 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
18818 Date: Tue May 30 09:10:32 2006 -0500
18820 Improve "reset" command's interaction with watchdog.
18822 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
18823 "reset altbank wd" will reset another bank WITH watch dog enabled
18824 "diswd" will disable watch dog after u-boot boots up successfully
18828 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
18830 Date: Tue May 30 08:51:19 2006 -0500
18832 Fix two SDRAM setup bugs.
18835 Enable 1T/2T based on number of DIMMs present.
18839 commit d11fec5015334deb2010e36ce00bb118cc5429a5
18841 Date: Fri May 26 10:24:48 2006 -0500
18843 Add first draft of the MPC8641HPCN doc/README.
18847 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
18849 Date: Fri May 26 10:13:04 2006 -0500
18851 Added pci@8000 block.
18852 Updated ethernet interrupt mappings (moved up 48).
18853 Cleaned up a few comments.
18857 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
18859 Date: Fri May 26 10:01:16 2006 -0500
18861 Allow args on reset command.
18865 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
18867 Date: Tue May 23 13:38:35 2006 +0200
18869 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
18870 fixes to the latter.
18872 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
18874 Date: Tue May 23 10:33:11 2006 +0200
18876 More cleanup for the delta board and the generic usb_ohci driver. Added
18877 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
18878 initialization and cleanup hooks respectively.
18880 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
18882 Date: Mon May 22 16:33:54 2006 +0200
18884 This patch adds USB storage support for the delta board. This is the first
18885 board to make use of a generic OHCI driver, that calls hooks for board
18886 dependant initialization.
18888 commit 14e37081ff3cac7ebe6e93836523429853b6b292
18890 Date: Fri May 19 13:28:39 2006 -0500
18892 Change arbitration to round-robin for SMP linux.
18894 commit 9a655876e5995be80f49054e2509500e871e4d3a
18896 Date: Fri May 19 13:26:34 2006 -0500
18898 Enable dual DDR controllers and interleaving.
18900 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
18902 Date: Fri May 19 13:22:44 2006 -0500
18904 Update 86xx address map and LAWBARs.
18906 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
18908 Date: Fri May 19 13:14:15 2006 -0500
18910 Remove L2 Cache invalidate polling.
18912 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
18914 Date: Fri May 19 12:33:09 2006 -0500
18916 Enable 2nd CPU and I2C.
18918 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
18920 Date: Mon May 15 07:26:56 2006 -0500
18922 Update interrupt mapping.
18924 commit 6cfea33477b04b63ed47386ed1629529484c33ba
18926 Date: Wed May 10 09:38:06 2006 -0500
18928 Remove unneeded INIT_RAM_LOCK cache twiddling.
18929 Correctly tracks r29 as global data pointer now.
18933 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
18935 Date: Wed May 10 09:33:07 2006 -0500
18937 Remove unnecessary flash.c file.
18939 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
18941 Date: Tue May 9 08:23:49 2006 -0500
18943 Get MPC8641HPCN flash images working.
18945 Enable the CFI driver.
18946 Remove bogus LAWBAR7 cruft.
18947 Use correct TEXT_BASE, Fixup load script.
18948 Enable SPD EEPROM during DDR setup.
18949 Use generic RFC 1918 IP addresses by default.
18951 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
18953 Date: Thu Apr 27 10:15:16 2006 -0500
18955 Cleanup whitespaces and style issues.
18956 Removed //-style comments.
18957 Use 80-column lines.
18958 Remove trailing whitespace.
18959 Remove dead code and debug cruft.
18961 commit a2320a6bf8113a09544c42d160d10ac69d049a03
18963 Date: Thu Apr 27 08:22:39 2006 -0500
18965 Revert bad PCI prefetch limit change.
18967 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
18969 Date: Wed Apr 26 17:58:56 2006 -0500
18971 Initial support for MPC8641 HPCN board.
projects / J-u-boot.git / blob