include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11 #define CONFIG_MX6
  12 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
  13 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */
  14
  15 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  16
  17 #include <asm/arch/imx-regs.h>
  18 #include <asm/imx-common/gpio.h>
  19
  20 /* ATAGs */
  21 #define CONFIG_CMDLINE_TAG
  22 #define CONFIG_SETUP_MEMORY_TAGS
  23 #define CONFIG_INITRD_TAG
  24 #define CONFIG_SERIAL_TAG
  25 #define CONFIG_REVISION_TAG
  26
  27 /* Size of malloc() pool */
  28 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  29
  30 /* Init Functions */
  31 #define CONFIG_BOARD_EARLY_INIT_F
  32 #define CONFIG_MISC_INIT_R
  33
  34 /* GPIO */
  35 #define CONFIG_MXC_GPIO
  36
  37 /* Serial */
  38 #define CONFIG_MXC_UART
  39 #define CONFIG_MXC_UART_BASE           UART2_BASE
  40
  41 #ifdef CONFIG_SPI_FLASH
  42
  43 /* SPI */
  44 #define CONFIG_CMD_SF
  45 #ifdef CONFIG_CMD_SF
  46   #define CONFIG_MXC_SPI
  47   #define CONFIG_SPI_FLASH_MTD
  48   #define CONFIG_SPI_FLASH_BAR
  49   #define CONFIG_SPI_FLASH_WINBOND
  50   #define CONFIG_SF_DEFAULT_BUS              0
  51   #define CONFIG_SF_DEFAULT_CS               (0|(IMX_GPIO_NR(3, 19)<<8))
  52                                              /* GPIO 3-19 (21248) */
  53   #define CONFIG_SF_DEFAULT_SPEED            30000000
  54   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  55 #endif
  56
  57 #else
  58 /* Enable NAND support */
  59 #define CONFIG_CMD_TIME
  60 #define CONFIG_CMD_NAND
  61 #define CONFIG_CMD_NAND_TRIMFFS
  62 #ifdef CONFIG_CMD_NAND
  63   #define CONFIG_NAND_MXS
  64   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  65   #define CONFIG_SYS_NAND_BASE          0x40000000
  66   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  67   #define CONFIG_SYS_NAND_ONFI_DETECTION
  68
  69   /* DMA stuff, needed for GPMI/MXS NAND support */
  70   #define CONFIG_APBH_DMA
  71   #define CONFIG_APBH_DMA_BURST
  72   #define CONFIG_APBH_DMA_BURST8
  73 #endif
  74
  75 #endif /* CONFIG_SPI_FLASH */
  76
  77 /* Flattened Image Tree Suport */
  78 #define CONFIG_FIT
  79 #define CONFIG_FIT_VERBOSE
  80
  81 /* I2C Configs */
  82 #define CONFIG_CMD_I2C
  83 #define CONFIG_SYS_I2C
  84 #define CONFIG_SYS_I2C_MXC
  85 #define CONFIG_SYS_I2C_SPEED              100000
  86
  87 /* MMC Configs */
  88 #define CONFIG_FSL_ESDHC
  89 #define CONFIG_FSL_USDHC
  90 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  91 #define CONFIG_SYS_FSL_USDHC_NUM       1
  92 #define CONFIG_MMC
  93 #define CONFIG_CMD_MMC
  94 #define CONFIG_GENERIC_MMC
  95 #define CONFIG_BOUNCE_BUFFER
  96
  97 /* Filesystem support */
  98 #define CONFIG_CMD_EXT2
  99 #define CONFIG_CMD_FAT
 100 #define CONFIG_CMD_UBIFS
 101 #define CONFIG_DOS_PARTITION
 102
 103 /* Network config - Allow larger/faster download for TFTP/NFS */
 104 #define CONFIG_IP_DEFRAG
 105 #define CONFIG_TFTP_BLOCKSIZE 4096
 106 #define CONFIG_NFS_READ_SIZE  4096
 107
 108 /*
 109  * SATA Configs
 110  */
 111 #define CONFIG_CMD_SATA
 112 #ifdef CONFIG_CMD_SATA
 113   #define CONFIG_DWC_AHSATA
 114   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 115   #define CONFIG_DWC_AHSATA_PORT_ID     0
 116   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 117   #define CONFIG_LBA48
 118   #define CONFIG_LIBATA
 119 #endif
 120
 121 /*
 122  * PCI express
 123  */
 124 #define CONFIG_CMD_PCI
 125 #ifdef CONFIG_CMD_PCI
 126 #define CONFIG_PCI
 127 #define CONFIG_PCI_PNP
 128 #define CONFIG_PCI_SCAN_SHOW
 129 #define CONFIG_PCIE_IMX
 130 #endif
 131
 132 /*
 133  * PMIC
 134  */
 135 #define CONFIG_POWER
 136 #define CONFIG_POWER_I2C
 137 #define CONFIG_POWER_PFUZE100
 138 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 139 #define CONFIG_POWER_LTC3676
 140 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 141
 142 /* Various command support */
 143 #include <config_cmd_default.h>
 144 #undef CONFIG_CMD_IMLS
 145 #define CONFIG_CMD_PING
 146 #define CONFIG_CMD_DHCP
 147 #define CONFIG_CMD_MII
 148 #define CONFIG_CMD_NET
 149 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 150 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 151 #define CONFIG_CMD_SETEXPR
 152 #define CONFIG_CMD_BOOTZ
 153 #define CONFIG_CMD_GSC
 154 #define CONFIG_CMD_UBI
 155 #define CONFIG_RBTREE
 156 #define CONFIG_LZO
 157 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 158 #ifdef CONFIG_CMD_FUSE
 159 #define CONFIG_MXC_OCOTP
 160 #endif
 161
 162
 163 /* Ethernet support */
 164 #define CONFIG_FEC_MXC
 165 #define CONFIG_MII
 166 #define IMX_FEC_BASE             ENET_BASE_ADDR
 167 #define CONFIG_FEC_XCV_TYPE      RGMII
 168 #define CONFIG_ETHPRIME          "FEC"
 169 #define CONFIG_FEC_MXC_PHYADDR   0
 170 #define CONFIG_PHYLIB
 171 #define CONFIG_ARP_TIMEOUT       200UL
 172
 173 /* USB Configs */
 174 #define CONFIG_CMD_USB
 175 #define CONFIG_USB_EHCI
 176 #define CONFIG_USB_EHCI_MX6
 177 #define CONFIG_USB_STORAGE
 178 #define CONFIG_USB_HOST_ETHER
 179 #define CONFIG_USB_ETHER_ASIX
 180 #define CONFIG_USB_ETHER_SMSC95XX
 181 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 182 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 183 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 184 #define CONFIG_MXC_USB_FLAGS      0
 185 #define CONFIG_USB_KEYBOARD
 186 #define CONFIG_CI_UDC
 187 #define CONFIG_USBD_HS
 188 #define CONFIG_USB_GADGET_DUALSPEED
 189 #define CONFIG_USB_ETHER
 190 #define CONFIG_USB_ETH_CDC
 191 #define CONFIG_NETCONSOLE
 192 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 193 #define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200
 194
 195 /* serial console (ttymxc1,115200) */
 196 #define CONFIG_CONS_INDEX              1
 197 #define CONFIG_BAUDRATE                115200
 198
 199 /* Miscellaneous configurable options */
 200 #define CONFIG_SYS_LONGHELP
 201 #define CONFIG_SYS_HUSH_PARSER
 202 #define CONFIG_SYS_PROMPT                    "Ventana > "
 203 #define CONFIG_SYS_CBSIZE                    1024
 204 #define CONFIG_AUTO_COMPLETE
 205 #define CONFIG_CMDLINE_EDITING
 206 #define CONFIG_HWCONFIG
 207
 208 /* Print Buffer Size */
 209 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 210 #define CONFIG_SYS_MAXARGS                 16
 211 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 212
 213 /* Memory configuration */
 214 #define CONFIG_SYS_MEMTEST_START       0x10000000
 215 #define CONFIG_SYS_MEMTEST_END         0x10010000
 216 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 217 #define CONFIG_SYS_TEXT_BASE             0x17800000
 218 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 219
 220 /* Physical Memory Map */
 221 #define CONFIG_NR_DRAM_BANKS           1
 222 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 223 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 224 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 225 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 226
 227 #define CONFIG_SYS_INIT_SP_OFFSET \
 228         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 229 #define CONFIG_SYS_INIT_SP_ADDR \
 230         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 231
 232 /* FLASH and environment organization */
 233 #define CONFIG_SYS_NO_FLASH  /* no NOR flash */
 234
 235 /*
 236  * MTD Command for mtdparts
 237  */
 238 #define CONFIG_CMD_MTDPARTS
 239 #define CONFIG_MTD_DEVICE
 240 #define CONFIG_MTD_PARTITIONS
 241 #ifdef CONFIG_SPI_FLASH
 242 #define MTDIDS_DEFAULT    "nor0=nor"
 243 #define MTDPARTS_DEFAULT  \
 244         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 245 #else
 246 #define MTDIDS_DEFAULT    "nand0=nand"
 247 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 248 #endif
 249
 250 /* Persistent Environment Config */
 251 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 252 #ifdef CONFIG_SPI_FLASH
 253 #define CONFIG_ENV_IS_IN_SPI_FLASH
 254 #else
 255 #define CONFIG_ENV_IS_IN_NAND
 256 #endif
 257 #if defined(CONFIG_ENV_IS_IN_MMC)
 258   #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 259   #define CONFIG_ENV_SIZE                (8 * 1024)
 260   #define CONFIG_SYS_MMC_ENV_DEV         0
 261 #elif defined(CONFIG_ENV_IS_IN_NAND)
 262   #define CONFIG_ENV_OFFSET              (16 << 20)
 263   #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 264   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 265   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
 266   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 267 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 268   #define CONFIG_ENV_OFFSET              (512 * 1024)
 269   #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 270   #define CONFIG_ENV_SIZE                (8 * 1024)
 271   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 272   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 273   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 274   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 275 #endif
 276
 277 /* Environment */
 278 #define CONFIG_BOOTDELAY          3
 279 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 280 #define CONFIG_IPADDR             192.168.1.1
 281 #define CONFIG_SERVERIP           192.168.1.146
 282 #define HWCONFIG_DEFAULT \
 283         "hwconfig=rs232;" \
 284         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 285
 286 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 287         "console=ttymxc1\0" \
 288         "bootdevs=usb mmc sata flash\0" \
 289         HWCONFIG_DEFAULT \
 290         "video=\0" \
 291         \
 292         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 293         "mtdids=" MTDIDS_DEFAULT "\0" \
 294         \
 295         "fdt_high=0xffffffff\0" \
 296         "fdt_addr=0x18000000\0" \
 297         "loadfdt=" \
 298                 "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
 299                         "echo Loaded DTB from boot/${fdt_file}; " \
 300                 "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
 301                         "echo Loaded DTB from boot/${fdt_file1}; " \
 302                 "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
 303                                 "echo Loaded DTB from boot/${fdt_file2}; " \
 304                 "fi\0" \
 305         \
 306         "script=boot/6x_bootscript-ventana\0" \
 307         "loadscript=" \
 308                 "if ${fsload} ${loadaddr} ${script}; then " \
 309                         "source; " \
 310                 "fi\0" \
 311         \
 312         "uimage=boot/uImage\0" \
 313         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 314         "mmc_boot=" \
 315                 "setenv fsload 'ext2load mmc 0:1'; " \
 316                 "mmc dev 0 && mmc rescan && " \
 317                 "run loadscript; " \
 318                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 319                         "setenv bootargs console=${console},${baudrate} " \
 320                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 321                                 "rootwait rw ${video} ${extra}; " \
 322                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 323                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 324                         "else " \
 325                                 "bootm; " \
 326                         "fi; " \
 327                 "fi\0" \
 328         \
 329         "sata_boot=" \
 330                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 331                 "run loadscript; " \
 332                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 333                         "setenv bootargs console=${console},${baudrate} " \
 334                                 "root=/dev/sda1 rootfstype=ext4 " \
 335                                 "rootwait rw ${video} ${extra}; " \
 336                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 337                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 338                         "else " \
 339                                 "bootm; " \
 340                         "fi; " \
 341                 "fi\0" \
 342         "usb_boot=" \
 343                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 344                 "run loadscript; " \
 345                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 346                         "setenv bootargs console=${console},${baudrate} " \
 347                                 "root=/dev/sda1 rootfstype=ext4 " \
 348                                 "rootwait rw ${video} ${extra}; " \
 349                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 350                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 351                         "else " \
 352                                 "bootm; " \
 353                         "fi; " \
 354                 "fi\0"
 355
 356 #ifdef CONFIG_SPI_FLASH
 357         #define CONFIG_EXTRA_ENV_SETTINGS \
 358         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 359         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 360         "image_uboot=ventana/u-boot_spi.imx\0" \
 361         \
 362         "spi_koffset=0x90000\0" \
 363         "spi_klen=0x200000\0" \
 364         \
 365         "spi_updateuboot=echo Updating uboot from " \
 366                 "${serverip}:${image_uboot}...; " \
 367                 "tftpboot ${loadaddr} ${image_uboot} && " \
 368                 "sf probe && sf erase 0 80000 && " \
 369                         "sf write ${loadaddr} 400 ${filesize}\0" \
 370         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 371                 "to ${spi_koffset} ...; " \
 372                 "tftp ${loadaddr} ${image_os} && " \
 373                 "sf probe && " \
 374                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 375         \
 376         "flash_boot=" \
 377                 "if sf probe && " \
 378                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 379                         "setenv bootargs console=${console},${baudrate} " \
 380                                 "root=/dev/mtdblock3 " \
 381                                 "rootfstype=squashfs,jffs2 " \
 382                                 "${video} ${extra}; " \
 383                         "bootm; " \
 384                 "fi\0"
 385 #else
 386         #define CONFIG_EXTRA_ENV_SETTINGS \
 387         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 388         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 389         \
 390         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 391                 "tftp ${loadaddr} ${image_rootfs} && " \
 392                 "nand erase.part rootfs && " \
 393                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 394         \
 395         "flash_boot=" \
 396                 "setenv fsload 'ubifsload'; " \
 397                 "ubi part rootfs && ubifsmount ubi0:rootfs; " \
 398                 "run loadscript; " \
 399                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 400                         "setenv bootargs console=${console},${baudrate} " \
 401                                 "root=ubi0:rootfs ubi.mtd=2 " \
 402                                 "rootfstype=ubifs ${video} ${extra}; " \
 403                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 404                                 "ubifsumount; " \
 405                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 406                         "else " \
 407                                 "ubifsumount; bootm; " \
 408                         "fi; " \
 409                 "fi\0"
 410 #endif
 411
 412 #define CONFIG_BOOTCOMMAND \
 413         "for btype in ${bootdevs}; do " \
 414                 "echo; echo Attempting ${btype} boot...; " \
 415                 "if run ${btype}_boot; then; fi; " \
 416         "done"
 417
 418 /* Device Tree Support */
 419 #define CONFIG_OF_BOARD_SETUP
 420 #define CONFIG_OF_LIBFDT
 421 #define CONFIG_FDT_FIXUP_PARTITIONS
 422
 423 #ifndef CONFIG_SYS_DCACHE_OFF
 424   #define CONFIG_CMD_CACHE
 425 #endif
 426
 427 #endif                         /* __CONFIG_H */