MAKEALL

   1 #!/bin/bash
   2 # Tool mainly for U-Boot Quality Assurance: build one or more board
   3 # configurations with minimal verbosity, showing only warnings and
   4 # errors.
   5 #
   6 # SPDX-License-Identifier:      GPL-2.0+
   7
   8 usage()
   9 {
  10         # if exiting with 0, write to stdout, else write to stderr
  11         local ret=${1:-0}
  12         [ "${ret}" -eq 1 ] && exec 1>&2
  13         cat <<-EOF
  14         Usage: MAKEALL [options] [--] [boards-to-build]
  15
  16         Options:
  17           -a ARCH,   --arch ARCH       Build all boards with arch ARCH
  18           -c CPU,    --cpu CPU         Build all boards with cpu CPU
  19           -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
  20           -s SOC,    --soc SOC         Build all boards with soc SOC
  21           -b BOARD,  --board BOARD     Build all boards with board name BOARD
  22           -l,        --list            List all targets to be built
  23           -m,        --maintainers     List all targets and maintainer email
  24           -M,        --mails           List all targets and all affilated emails
  25           -C,        --check           Enable build checking
  26           -n,        --continue        Continue (skip boards already built)
  27           -r,        --rebuild-errors  Rebuild any boards that errored
  28           -h,        --help            This help output
  29
  30         Selections by these options are logically ANDed; if the same option
  31         is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
  32         will select all configurations where the vendor is either FOO or
  33         BAR.  Any additional arguments specified on the command line are
  34         always build additionally.  See the boards.cfg file for more info.
  35
  36         If no boards are specified, then the default is "powerpc".
  37
  38         Environment variables:
  39           BUILD_NCPUS      number of parallel make jobs (default: auto)
  40           CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
  41           CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
  42                            architecture "ARCH".  Substitute "ARCH" for any
  43                            supported architecture (default: "")
  44           MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
  45           BUILD_DIR        output build directory (default: ./)
  46           BUILD_NBUILDS    number of parallel targets (default: 1)
  47
  48         Examples:
  49           - build all Power Architecture boards:
  50               MAKEALL -a powerpc
  51               MAKEALL --arch powerpc
  52               MAKEALL powerpc
  53           - build all PowerPC boards manufactured by vendor "esd":
  54               MAKEALL -a powerpc -v esd
  55           - build all PowerPC boards manufactured either by "keymile" or "siemens":
  56               MAKEALL -a powerpc -v keymile -v siemens
  57           - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
  58               MAKEALL -c mpc83xx -v freescale 4xx
  59         EOF
  60         exit ${ret}
  61 }
  62
  63 SHORT_OPTS="ha:c:v:s:b:lmMCnr"
  64 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
  65
  66 # Option processing based on util-linux-2.13/getopt-parse.bash
  67
  68 # Note that we use `"$@"' to let each command-line parameter expand to a
  69 # separate word. The quotes around `$@' are essential!
  70 # We need TEMP as the `eval set --' would nuke the return value of
  71 # getopt.
  72 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
  73      -n 'MAKEALL' -- "$@"`
  74
  75 [ $? != 0 ] && usage 1
  76
  77 # Note the quotes around `$TEMP': they are essential!
  78 eval set -- "$TEMP"
  79
  80 SELECTED=''
  81 ONLY_LIST=''
  82 PRINT_MAINTS=''
  83 MAINTAINERS_ONLY=''
  84 CONTINUE=''
  85 REBUILD_ERRORS=''
  86
  87 while true ; do
  88         case "$1" in
  89         -a|--arch)
  90                 # echo "Option ARCH: argument \`$2'"
  91                 if [ "$opt_a" ] ; then
  92                         opt_a="${opt_a%)} || \$2 == \"$2\")"
  93                 else
  94                         opt_a="(\$2 == \"$2\")"
  95                 fi
  96                 SELECTED='y'
  97                 shift 2 ;;
  98         -c|--cpu)
  99                 # echo "Option CPU: argument \`$2'"
 100                 if [ "$opt_c" ] ; then
 101                         opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
 102                 else
 103                         opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
 104                 fi
 105                 SELECTED='y'
 106                 shift 2 ;;
 107         -s|--soc)
 108                 # echo "Option SoC: argument \`$2'"
 109                 if [ "$opt_s" ] ; then
 110                         opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
 111                 else
 112                         opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
 113                 fi
 114                 SELECTED='y'
 115                 shift 2 ;;
 116         -v|--vendor)
 117                 # echo "Option VENDOR: argument \`$2'"
 118                 if [ "$opt_v" ] ; then
 119                         opt_v="${opt_v%)} || \$5 == \"$2\")"
 120                 else
 121                         opt_v="(\$5 == \"$2\")"
 122                 fi
 123                 SELECTED='y'
 124                 shift 2 ;;
 125         -b|--board)
 126                 # echo "Option BOARD: argument \`$2'"
 127                 if [ "$opt_b" ] ; then
 128                         opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
 129                 else
 130                         # We need to check the 7th field too
 131                         # for boards whose 6th field is "-"
 132                         opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
 133                 fi
 134                 SELECTED='y'
 135                 shift 2 ;;
 136         -C|--check)
 137                 CHECK='C=1'
 138                 shift ;;
 139         -n|--continue)
 140                 CONTINUE='y'
 141                 shift ;;
 142         -r|--rebuild-errors)
 143                 REBUILD_ERRORS='y'
 144                 shift ;;
 145         -l|--list)
 146                 ONLY_LIST='y'
 147                 shift ;;
 148         -m|--maintainers)
 149                 ONLY_LIST='y'
 150                 PRINT_MAINTS='y'
 151                 MAINTAINERS_ONLY='y'
 152                 shift ;;
 153         -M|--mails)
 154                 ONLY_LIST='y'
 155                 PRINT_MAINTS='y'
 156                 shift ;;
 157         -h|--help)
 158                 usage ;;
 159         --)
 160                 shift ; break ;;
 161         *)
 162                 echo "Internal error!" >&2 ; exit 1 ;;
 163         esac
 164 done
 165 # echo "Remaining arguments:"
 166 # for arg do echo '--> '"\`$arg'" ; done
 167
 168 FILTER="\$1 !~ /^#/"
 169 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
 170 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
 171 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
 172 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
 173 [ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
 174
 175 if [ "$SELECTED" ] ; then
 176         SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
 177
 178         # Make sure some boards from boards.cfg are actually found
 179         if [ -z "$SELECTED" ] ; then
 180                 echo "Error: No boards selected, invalid arguments"
 181                 exit 1
 182         fi
 183 fi
 184
 185 #########################################################################
 186
 187 # Print statistics when we exit
 188 trap exit 1 2 3 15
 189 trap print_stats 0
 190
 191 # Determine number of CPU cores if no default was set
 192 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
 193
 194 if [ "$BUILD_NCPUS" -gt 1 ]
 195 then
 196         JOBS="-j $((BUILD_NCPUS + 1))"
 197 else
 198         JOBS=""
 199 fi
 200
 201 if [ "${MAKEALL_LOGDIR}" ] ; then
 202         LOG_DIR=${MAKEALL_LOGDIR}
 203 else
 204         LOG_DIR="LOG"
 205 fi
 206
 207 : ${BUILD_NBUILDS:=1}
 208 BUILD_MANY=0
 209
 210 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
 211         BUILD_MANY=1
 212         : ${BUILD_DIR:=./build}
 213         mkdir -p "${BUILD_DIR}/ERR"
 214         find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
 215 fi
 216
 217 : ${BUILD_DIR:=.}
 218
 219 OUTPUT_PREFIX="${BUILD_DIR}"
 220
 221 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
 222 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
 223         find "${LOG_DIR}/" -type f -exec rm -f {} +
 224 fi
 225
 226 LIST=""
 227
 228 # Keep track of the number of builds and errors
 229 ERR_CNT=0
 230 ERR_LIST=""
 231 WRN_CNT=0
 232 WRN_LIST=""
 233 TOTAL_CNT=0
 234 SKIP_CNT=0
 235 CURRENT_CNT=0
 236 OLDEST_IDX=1
 237 RC=0
 238
 239 # Helper funcs for parsing boards.cfg
 240 targets_by_field()
 241 {
 242         field=$1
 243         regexp=$2
 244
 245         awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
 246                                                                 boards.cfg
 247 }
 248
 249 targets_by_arch() { targets_by_field 2 "$@" ; }
 250 targets_by_cpu()  { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
 251 targets_by_soc()  { targets_by_field 4 "$@" ; }
 252
 253 #########################################################################
 254 ## MPC5xx Systems
 255 #########################################################################
 256
 257 LIST_5xx="$(targets_by_cpu mpc5xx)"
 258
 259 #########################################################################
 260 ## MPC5xxx Systems
 261 #########################################################################
 262
 263 LIST_5xxx="$(targets_by_cpu mpc5xxx)"
 264
 265 #########################################################################
 266 ## MPC512x Systems
 267 #########################################################################
 268
 269 LIST_512x="$(targets_by_cpu mpc512x)"
 270
 271 #########################################################################
 272 ## MPC8xx Systems
 273 #########################################################################
 274
 275 LIST_8xx="$(targets_by_cpu mpc8xx)"
 276
 277 #########################################################################
 278 ## PPC4xx Systems
 279 #########################################################################
 280
 281 LIST_4xx="$(targets_by_cpu ppc4xx)"
 282
 283 #########################################################################
 284 ## MPC824x Systems
 285 #########################################################################
 286
 287 LIST_824x="$(targets_by_cpu mpc824x)"
 288
 289 #########################################################################
 290 ## MPC8260 Systems (includes 8250, 8255 etc.)
 291 #########################################################################
 292
 293 LIST_8260="$(targets_by_cpu mpc8260)"
 294
 295 #########################################################################
 296 ## MPC83xx Systems (includes 8349, etc.)
 297 #########################################################################
 298
 299 LIST_83xx="$(targets_by_cpu mpc83xx)"
 300
 301 #########################################################################
 302 ## MPC85xx Systems (includes 8540, 8560 etc.)
 303 #########################################################################
 304
 305 LIST_85xx="$(targets_by_cpu mpc85xx)"
 306
 307 #########################################################################
 308 ## MPC86xx Systems
 309 #########################################################################
 310
 311 LIST_86xx="$(targets_by_cpu mpc86xx)"
 312
 313 #########################################################################
 314 ## 74xx/7xx Systems
 315 #########################################################################
 316
 317 LIST_74xx_7xx="$(targets_by_cpu 74xx_7xx)"
 318
 319 #########################################################################
 320 ## PowerPC groups
 321 #########################################################################
 322
 323 LIST_TSEC="             \
 324         ${LIST_83xx}    \
 325         ${LIST_85xx}    \
 326         ${LIST_86xx}    \
 327 "
 328
 329 LIST_powerpc="          \
 330         ${LIST_5xx}     \
 331         ${LIST_512x}    \
 332         ${LIST_5xxx}    \
 333         ${LIST_8xx}     \
 334         ${LIST_824x}    \
 335         ${LIST_8260}    \
 336         ${LIST_83xx}    \
 337         ${LIST_85xx}    \
 338         ${LIST_86xx}    \
 339         ${LIST_4xx}     \
 340         ${LIST_74xx_7xx}\
 341 "
 342
 343 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
 344 # still using "ppc" instead of "powerpc"
 345 LIST_ppc="              \
 346         ${LIST_powerpc} \
 347 "
 348
 349 #########################################################################
 350 ## StrongARM Systems
 351 #########################################################################
 352
 353 LIST_SA="$(targets_by_cpu sa1100)"
 354
 355 #########################################################################
 356 ## ARM7 Systems
 357 #########################################################################
 358
 359 LIST_ARM7="$(targets_by_cpu arm720t)"
 360
 361 #########################################################################
 362 ## ARM9 Systems
 363 #########################################################################
 364
 365 LIST_ARM9="$(targets_by_cpu arm920t)    \
 366         $(targets_by_cpu arm926ejs)     \
 367         $(targets_by_cpu arm946es)      \
 368 "
 369
 370 #########################################################################
 371 ## ARM11 Systems
 372 #########################################################################
 373 LIST_ARM11="$(targets_by_cpu arm1136)   \
 374         $(targets_by_cpu arm1176)       \
 375 "
 376
 377 #########################################################################
 378 ## ARMV7 Systems
 379 #########################################################################
 380
 381 LIST_ARMV7="$(targets_by_cpu armv7)"
 382
 383 #########################################################################
 384 ## AT91 Systems
 385 #########################################################################
 386
 387 LIST_at91="$(targets_by_soc at91)"
 388
 389 #########################################################################
 390 ## Xscale Systems
 391 #########################################################################
 392
 393 LIST_pxa="$(targets_by_cpu pxa)"
 394
 395 LIST_ixp="$(targets_by_cpu ixp)"
 396
 397 #########################################################################
 398 ## SPEAr Systems
 399 #########################################################################
 400
 401 LIST_spear="$(targets_by_soc spear)"
 402
 403 #########################################################################
 404 ## ARM groups
 405 #########################################################################
 406
 407 LIST_arm="$(targets_by_arch arm)"
 408
 409 #########################################################################
 410 ## MIPS Systems         (default = big endian)
 411 #########################################################################
 412
 413 LIST_mips4kc="          \
 414         incaip          \
 415         incaip_100MHz   \
 416         incaip_133MHz   \
 417         incaip_150MHz   \
 418         qemu_mips       \
 419         vct_platinum    \
 420         vct_platinum_small      \
 421         vct_platinum_onenand    \
 422         vct_platinum_onenand_small      \
 423         vct_platinumavc \
 424         vct_platinumavc_small   \
 425         vct_platinumavc_onenand \
 426         vct_platinumavc_onenand_small   \
 427         vct_premium     \
 428         vct_premium_small       \
 429         vct_premium_onenand     \
 430         vct_premium_onenand_small       \
 431 "
 432
 433 LIST_au1xx0="           \
 434         dbau1000        \
 435         dbau1100        \
 436         dbau1500        \
 437         dbau1550        \
 438 "
 439
 440 LIST_mips="             \
 441         ${LIST_mips4kc} \
 442         ${LIST_mips5kc} \
 443         ${LIST_au1xx0}  \
 444 "
 445
 446 #########################################################################
 447 ## MIPS Systems         (little endian)
 448 #########################################################################
 449
 450 LIST_au1xx0_el="        \
 451         dbau1550_el     \
 452         pb1000          \
 453 "
 454 LIST_mips_el="                  \
 455         ${LIST_au1xx0_el}       \
 456 "
 457 #########################################################################
 458 ## OpenRISC Systems
 459 #########################################################################
 460
 461 LIST_openrisc="$(targets_by_arch openrisc)"
 462
 463 #########################################################################
 464 ## x86 Systems
 465 #########################################################################
 466
 467 LIST_x86="$(targets_by_arch x86)"
 468
 469 #########################################################################
 470 ## Nios-II Systems
 471 #########################################################################
 472
 473 LIST_nios2="$(targets_by_arch nios2)"
 474
 475 #########################################################################
 476 ## MicroBlaze Systems
 477 #########################################################################
 478
 479 LIST_microblaze="$(targets_by_arch microblaze)"
 480
 481 #########################################################################
 482 ## ColdFire Systems
 483 #########################################################################
 484
 485 LIST_m68k="$(targets_by_arch m68k)"
 486 LIST_coldfire=${LIST_m68k}
 487
 488 #########################################################################
 489 ## AVR32 Systems
 490 #########################################################################
 491
 492 LIST_avr32="$(targets_by_arch avr32)"
 493
 494 #########################################################################
 495 ## Blackfin Systems
 496 #########################################################################
 497
 498 LIST_blackfin="$(targets_by_arch blackfin)"
 499
 500 #########################################################################
 501 ## SH Systems
 502 #########################################################################
 503
 504 LIST_sh2="$(targets_by_cpu sh2)"
 505 LIST_sh3="$(targets_by_cpu sh3)"
 506 LIST_sh4="$(targets_by_cpu sh4)"
 507
 508 LIST_sh="$(targets_by_arch sh)"
 509
 510 #########################################################################
 511 ## SPARC Systems
 512 #########################################################################
 513
 514 LIST_sparc="$(targets_by_arch sparc)"
 515
 516 #########################################################################
 517 ## NDS32 Systems
 518 #########################################################################
 519
 520 LIST_nds32="$(targets_by_arch nds32)"
 521
 522 #-----------------------------------------------------------------------
 523
 524 get_target_location() {
 525         local target=$1
 526         local BOARD_NAME=""
 527         local CONFIG_NAME=""
 528         local board=""
 529         local vendor=""
 530
 531         # Automatic mode
 532         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 533         if [ -z "${line}" ] ; then echo "" ; return ; fi
 534
 535         set ${line}
 536
 537         CONFIG_NAME="${7%_config}"
 538
 539         [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
 540
 541         if [ $# -gt 5 ]; then
 542                 if [ "$6" = "-" ] ; then
 543                         board=${BOARD_NAME}
 544                 else
 545                         board="$6"
 546                 fi
 547         fi
 548
 549         [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
 550         [ $# -gt 6 ] && [ "$8" != "-" ] && {
 551                 tmp="${8%:*}"
 552                 if [ "$tmp" ] ; then
 553                         CONFIG_NAME="$tmp"
 554                 fi
 555         }
 556
 557         # Assign board directory to BOARDIR variable
 558         if [ "${vendor}" == "-" ] ; then
 559             BOARDDIR=${board}
 560         else
 561             BOARDDIR=${vendor}/${board}
 562         fi
 563
 564         echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
 565 }
 566
 567 get_target_maintainers() {
 568         local name=`echo $1 | cut -d : -f 3`
 569
 570         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 571         if [ -z "${line}" ]; then
 572                 echo ""
 573                 return ;
 574         fi
 575
 576         local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
 577         [ "$mails" == "-" ] && mails=""
 578         echo "$mails"
 579 }
 580
 581 get_target_arch() {
 582         local target=$1
 583
 584         # Automatic mode
 585         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 586
 587         if [ -z "${line}" ] ; then echo "" ; return ; fi
 588
 589         set ${line}
 590         echo "$2"
 591 }
 592
 593 list_target() {
 594         if [ "$PRINT_MAINTS" != 'y' ] ; then
 595                 echo "$1"
 596                 return
 597         fi
 598
 599         echo -n "$1:"
 600
 601         local loc=`get_target_location $1`
 602
 603         if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
 604
 605         local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
 606
 607         if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
 608
 609                 local dir=`echo ${loc} | cut -d ":" -f 2`
 610                 local cfg=`echo ${loc} | cut -d ":" -f 1`
 611                 local git_result=`git log --format=%aE board/${dir} \
 612                                 include/configs/${cfg}.h | grep "@"`
 613                 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
 614                                                 head -n 3`
 615                 local git_result_top=`echo ${git_result} | tr " " "\n" | \
 616                         sort | uniq -c | sort -nr | head -n 3 | \
 617                         sed "s/^ \+[0-9]\+ \+//"`
 618
 619                 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
 620                         sort -u | tr "\n" " " | sed "s/ $//" ;
 621         else
 622                 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
 623                                                 sed "s/ $//" ;
 624         fi
 625
 626         echo ""
 627 }
 628
 629 # Each finished build will have a file called ${donep}${n},
 630 # where n is the index of the build. Each build
 631 # we've already noted as finished will have ${skipp}${n}.
 632 # The code managing the build process will use this information
 633 # to ensure that only BUILD_NBUILDS builds are in flight at once
 634 donep="${LOG_DIR}/._done_"
 635 skipp="${LOG_DIR}/._skip_"
 636
 637 build_target_killed() {
 638         echo "Aborted $target build."
 639         # Remove the logs for this board since it was aborted
 640         rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
 641         exit
 642 }
 643
 644 build_target() {
 645         target=$1
 646         build_idx=$2
 647
 648         if [ "$ONLY_LIST" == 'y' ] ; then
 649                 list_target ${target}
 650                 return
 651         fi
 652
 653         if [ $BUILD_MANY == 1 ] ; then
 654                 output_dir="${OUTPUT_PREFIX}/${target}"
 655                 mkdir -p "${output_dir}"
 656                 trap build_target_killed TERM
 657         else
 658                 output_dir="${OUTPUT_PREFIX}"
 659         fi
 660
 661         export BUILD_DIR="${output_dir}"
 662
 663         target_arch=$(get_target_arch ${target})
 664         eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
 665         if [ "${cross_toolchain}" ] ; then
 666             MAKE="make CROSS_COMPILE=${cross_toolchain}"
 667         elif [ "${CROSS_COMPILE}" ] ; then
 668             MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
 669         else
 670             MAKE=make
 671         fi
 672
 673         ${MAKE} distclean >/dev/null
 674         ${MAKE} -s ${target}_config
 675
 676         ${MAKE} ${JOBS} ${CHECK} all \
 677                 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
 678
 679         # Check for 'make' errors
 680         if [ ${PIPESTATUS[0]} -ne 0 ] ; then
 681                 RC=1
 682         fi
 683
 684         if [ $BUILD_MANY == 1 ] ; then
 685                 trap - TERM
 686
 687                 ${MAKE} -s tidy
 688
 689                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 690                         cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
 691                 else
 692                         rm ${LOG_DIR}/${target}.ERR
 693                 fi
 694         else
 695                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 696                         if grep -iw error ${LOG_DIR}/${target}.ERR ; then
 697                                 : $(( ERR_CNT += 1 ))
 698                                 ERR_LIST="${ERR_LIST} $target"
 699                         else
 700                                 : $(( WRN_CNT += 1 ))
 701                                 WRN_LIST="${WRN_LIST} $target"
 702                         fi
 703                 else
 704                         rm ${LOG_DIR}/${target}.ERR
 705                 fi
 706         fi
 707
 708         OBJS=${output_dir}/u-boot
 709         if [ -e ${output_dir}/spl/u-boot-spl ]; then
 710                 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
 711         fi
 712
 713         ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
 714
 715         [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
 716
 717         touch "${donep}${build_idx}"
 718 }
 719
 720 manage_builds() {
 721         search_idx=${OLDEST_IDX}
 722         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 723
 724         while true; do
 725                 if [ -e "${donep}${search_idx}" ] ; then
 726                         : $(( CURRENT_CNT-- ))
 727                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 728                                 : $(( OLDEST_IDX++ ))
 729
 730                         # Only want to count it once
 731                         rm -f "${donep}${search_idx}"
 732                         touch "${skipp}${search_idx}"
 733                 elif [ -e "${skipp}${search_idx}" ] ; then
 734                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 735                                 : $(( OLDEST_IDX++ ))
 736                 fi
 737                 : $(( search_idx++ ))
 738                 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
 739                         if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 740                                 search_idx=${OLDEST_IDX}
 741                                 sleep 1
 742                         else
 743                                 break
 744                         fi
 745                 fi
 746         done
 747 }
 748
 749 build_targets() {
 750         for t in "$@" ; do
 751                 # If a LIST_xxx var exists, use it.  But avoid variable
 752                 # expansion in the eval when a board name contains certain
 753                 # characters that the shell interprets.
 754                 case ${t} in
 755                         *[-+=]*) list= ;;
 756                         *)       list=$(eval echo '${LIST_'$t'}') ;;
 757                 esac
 758                 if [ -n "${list}" ] ; then
 759                         build_targets ${list}
 760                 else
 761                         : $((TOTAL_CNT += 1))
 762                         : $((CURRENT_CNT += 1))
 763                         rm -f "${donep}${TOTAL_CNT}"
 764                         rm -f "${skipp}${TOTAL_CNT}"
 765                         if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
 766                                 : $((SKIP_CNT += 1))
 767                                 touch "${donep}${TOTAL_CNT}"
 768                         elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
 769                                 : $((SKIP_CNT += 1))
 770                                 touch "${donep}${TOTAL_CNT}"
 771                         else
 772                                 if [ $BUILD_MANY == 1 ] ; then
 773                                         build_target ${t} ${TOTAL_CNT} &
 774                                 else
 775                                         CUR_TGT="${t}"
 776                                         build_target ${t} ${TOTAL_CNT}
 777                                         CUR_TGT=''
 778                                 fi
 779                         fi
 780                 fi
 781
 782                 # We maintain a running count of all the builds we have done.
 783                 # Each finished build will have a file called ${donep}${n},
 784                 # where n is the index of the build. Each build
 785                 # we've already noted as finished will have ${skipp}${n}.
 786                 # We track the current index via TOTAL_CNT, and the oldest
 787                 # index. When we exceed the maximum number of parallel builds,
 788                 # We look from oldest to current for builds that have completed,
 789                 # and update the current count and oldest index as appropriate.
 790                 # If we've gone through the entire list, wait a second, and
 791                 # reprocess the entire list until we find a build that has
 792                 # completed
 793                 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 794                         manage_builds
 795                 fi
 796         done
 797 }
 798
 799 #-----------------------------------------------------------------------
 800
 801 kill_children() {
 802         local OS=$(uname -s)
 803         local children=""
 804         case "${OS}" in
 805                 "Darwin")
 806                         # Mac OS X is known to have BSD style ps
 807                         local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
 808                         children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
 809                         ;;
 810                 *)
 811                         # everything else tries the GNU style
 812                         local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
 813                         children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
 814                         ;;
 815         esac
 816
 817         kill $children 2> /dev/null
 818         wait $children 2> /dev/null
 819
 820         exit
 821 }
 822
 823 print_stats() {
 824         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 825
 826         # Only count boards that completed
 827         : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
 828
 829         rm -f ${donep}* ${skipp}*
 830
 831         if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
 832                 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
 833                 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
 834                 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
 835                 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
 836                 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
 837                 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
 838         else
 839                 # Remove the logs for any board that was interrupted
 840                 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
 841         fi
 842
 843         : $((TOTAL_CNT -= ${SKIP_CNT}))
 844         echo ""
 845         echo "--------------------- SUMMARY ----------------------------"
 846         if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
 847                 echo "Boards skipped: ${SKIP_CNT}"
 848         fi
 849         echo "Boards compiled: ${TOTAL_CNT}"
 850         if [ ${ERR_CNT} -gt 0 ] ; then
 851                 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
 852         fi
 853         if [ ${WRN_CNT} -gt 0 ] ; then
 854                 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
 855         fi
 856         echo "----------------------------------------------------------"
 857
 858         if [ $BUILD_MANY == 1 ] ; then
 859                 kill_children
 860         fi
 861
 862         exit $RC
 863 }
 864
 865 #-----------------------------------------------------------------------
 866
 867 # Build target groups selected by options, plus any command line args
 868 set -- ${SELECTED} "$@"
 869 # run PowerPC by default
 870 [ $# = 0 ] && set -- powerpc
 871 build_targets "$@"
 872 wait