include/configs/kmcent2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2016 Keymile AG
   4  * Rainer Boschung <[email protected]>
   5  *
   6  */
   7
   8 #ifndef __KMCENT2_H
   9 #define __KMCENT2_H
  10
  11 #define CONFIG_HOSTNAME         "kmcent2"
  12 #define KM_BOARD_NAME   CONFIG_HOSTNAME
  13
  14 /*
  15  * The Linux fsl_fman driver needs to be able to process frames with more
  16  * than just the VLAN tag (i.e. eDSA tag). It is passed as a kernel boot
  17  * parameters
  18  */
  19 #define CONFIG_KM_DEF_BOOT_ARGS_CPU     "fsl_dpaa_fman.fsl_fm_max_frm=1558"
  20
  21 #include "km/keymile-common.h"
  22
  23 /* Application IFC chip selects */
  24 #define SYS_LAWAPP_BASE         0xc0000000
  25 #define SYS_LAWAPP_BASE_PHYS    (0xf00000000ull | SYS_LAWAPP_BASE)
  26
  27 /* Application IFC CS4 MRAM */
  28 #define CONFIG_SYS_MRAM_BASE            SYS_LAWAPP_BASE
  29 #define SYS_MRAM_BASE_PHYS      SYS_LAWAPP_BASE_PHYS
  30 #define SYS_MRAM_CSPR_EXT       (0x0f)
  31 #define SYS_MRAM_CSPR   (CSPR_PHYS_ADDR(CONFIG_SYS_MRAM_BASE) | \
  32                                 CSPR_PORT_SIZE_8 | /* 8 bit */          \
  33                                 CSPR_MSEL_GPCM   | /* msel = gpcm */    \
  34                                 CSPR_V /* bank is valid */)
  35 #define SYS_MRAM_AMASK          IFC_AMASK(2 * 1024 * 1024) /* 2 MiB */
  36 #define SYS_MRAM_CSOR           CSOR_GPCM_TRHZ_40
  37 /* MRAM Timing parameters for IFC CS4 */
  38 #define SYS_MRAM_FTIM0  (FTIM0_GPCM_TACSE(0x6) | \
  39                         FTIM0_GPCM_TEADC(0x8)  | \
  40                         FTIM0_GPCM_TEAHC(0x2))
  41 #define SYS_MRAM_FTIM1  (FTIM1_GPCM_TACO(0x2) | \
  42                         FTIM1_GPCM_TRAD(0xe))
  43 #define SYS_MRAM_FTIM2  (FTIM2_GPCM_TCS(0x2) | \
  44                         FTIM2_GPCM_TCH(0x2)  | \
  45                         FTIM2_GPCM_TWP(0x8))
  46 #define SYS_MRAM_FTIM3  0x04000000
  47 #define CONFIG_SYS_CSPR4_EXT    SYS_MRAM_CSPR_EXT
  48 #define CONFIG_SYS_CSPR4        SYS_MRAM_CSPR
  49 #define CONFIG_SYS_AMASK4       SYS_MRAM_AMASK
  50 #define CONFIG_SYS_CSOR4        SYS_MRAM_CSOR
  51 #define CONFIG_SYS_CS4_FTIM0    SYS_MRAM_FTIM0
  52 #define CONFIG_SYS_CS4_FTIM1    SYS_MRAM_FTIM1
  53 #define CONFIG_SYS_CS4_FTIM2    SYS_MRAM_FTIM2
  54 #define CONFIG_SYS_CS4_FTIM3    SYS_MRAM_FTIM3
  55
  56 /* Application IFC CS6: BFTIC */
  57 #define SYS_BFTIC_BASE          0xd0000000
  58 #define SYS_BFTIC_BASE_PHYS     (0xf00000000ull | SYS_BFTIC_BASE)
  59 #define SYS_BFTIC_CSPR_EXT      (0x0f)
  60 #define SYS_BFTIC_CSPR  (CSPR_PHYS_ADDR(SYS_BFTIC_BASE) | \
  61                                 CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\
  62                                 CSPR_MSEL_GPCM |   /* MSEL = GPCM */\
  63                                 CSPR_V)            /* valid */
  64 #define SYS_BFTIC_AMASK IFC_AMASK(64 * 1024)  /* 64kB */
  65 #define SYS_BFTIC_CSOR  CSOR_GPCM_TRHZ_40
  66 /* BFTIC Timing parameters for IFC CS6 */
  67 #define SYS_BFTIC_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
  68                                 FTIM0_GPCM_TEADC(0x8) | \
  69                                 FTIM0_GPCM_TEAHC(0x2))
  70 #define SYS_BFTIC_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
  71                                 FTIM1_GPCM_TRAD(0x12))
  72 #define SYS_BFTIC_FTIM2 (FTIM2_GPCM_TCS(0x3) | \
  73                                 FTIM2_GPCM_TCH(0x1) | \
  74                                 FTIM2_GPCM_TWP(0x12))
  75 #define SYS_BFTIC_FTIM3 0x04000000
  76 #define CONFIG_SYS_CSPR6_EXT    SYS_BFTIC_CSPR_EXT
  77 #define CONFIG_SYS_CSPR6        SYS_BFTIC_CSPR
  78 #define CONFIG_SYS_AMASK6       SYS_BFTIC_AMASK
  79 #define CONFIG_SYS_CSOR6        SYS_BFTIC_CSOR
  80 #define CONFIG_SYS_CS6_FTIM0    SYS_BFTIC_FTIM0
  81 #define CONFIG_SYS_CS6_FTIM1    SYS_BFTIC_FTIM1
  82 #define CONFIG_SYS_CS6_FTIM2    SYS_BFTIC_FTIM2
  83 #define CONFIG_SYS_CS6_FTIM3    SYS_BFTIC_FTIM3
  84
  85 /* Application IFC CS7 PAXE */
  86 #define CONFIG_SYS_PAXE_BASE            0xd8000000
  87 #define SYS_PAXE_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_PAXE_BASE)
  88 #define SYS_PAXE_CSPR_EXT       (0x0f)
  89 #define SYS_PAXE_CSPR  (CSPR_PHYS_ADDR(CONFIG_SYS_PAXE_BASE) | \
  90                                 CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\
  91                                 CSPR_MSEL_GPCM |   /* MSEL = GPCM */\
  92                                 CSPR_V)            /* valid */
  93 #define SYS_PAXE_AMASK IFC_AMASK(64 * 1024)  /* 64kB */
  94 #define SYS_PAXE_CSOR  CSOR_GPCM_TRHZ_40
  95 /* PAXE Timing parameters for IFC CS7 */
  96 #define SYS_PAXE_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
  97                         FTIM0_GPCM_TEADC(0x8) | \
  98                         FTIM0_GPCM_TEAHC(0x2))
  99 #define SYS_PAXE_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
 100                         FTIM1_GPCM_TRAD(0x12))
 101 #define SYS_PAXE_FTIM2 (FTIM2_GPCM_TCS(0x3) | \
 102                         FTIM2_GPCM_TCH(0x1) | \
 103                         FTIM2_GPCM_TWP(0x12))
 104 #define SYS_PAXE_FTIM3  0x04000000
 105 #define CONFIG_SYS_CSPR7_EXT    SYS_PAXE_CSPR_EXT
 106 #define CONFIG_SYS_CSPR7        SYS_PAXE_CSPR
 107 #define CONFIG_SYS_AMASK7       SYS_PAXE_AMASK
 108 #define CONFIG_SYS_CSOR7        SYS_PAXE_CSOR
 109 #define CONFIG_SYS_CS7_FTIM0    SYS_PAXE_FTIM0
 110 #define CONFIG_SYS_CS7_FTIM1    SYS_PAXE_FTIM1
 111 #define CONFIG_SYS_CS7_FTIM2    SYS_PAXE_FTIM2
 112 #define CONFIG_SYS_CS7_FTIM3    SYS_PAXE_FTIM3
 113
 114 /* PRST */
 115 #define KM_BFTIC4_RST           0
 116 #define KM_DPAXE_RST            1
 117 #define KM_FEMT_RST             3
 118 #define KM_FOAM_RST             4
 119 #define KM_EFE_RST              5
 120 #define KM_ES_PHY_RST           6
 121 #define KM_XES_PHY_RST          7
 122 #define KM_ZL30158_RST          8
 123 #define KM_ZL30364_RST          9
 124 #define KM_BOBCAT_RST           10
 125 #define KM_ETHSW_DDR_RST                12
 126 #define KM_CFE_RST              13
 127 #define KM_PEXSW_RST            14
 128 #define KM_PEXSW_NT_RST         15
 129
 130 /* QRIO GPIOs used for deblocking */
 131 #define KM_I2C_DEBLOCK_PORT     QRIO_GPIO_A
 132 #define KM_I2C_DEBLOCK_SCL      20
 133 #define KM_I2C_DEBLOCK_SDA      21
 134
 135 /* High Level Configuration Options */
 136 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 137 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
 138
 139 #define CONFIG_RESET_VECTOR_ADDRESS     0xebfffffc
 140
 141 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 142 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
 143 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 144
 145 /* Environment in parallel NOR-Flash */
 146 #define CONFIG_ENV_TOTAL_SIZE           0x040000
 147 #define ENV_DEL_ADDR            0xebf00000      /*direct for newenv*/
 148
 149 /*
 150  * These can be toggled for performance analysis, otherwise use default.
 151  */
 152 #define CONFIG_SYS_CACHE_STASHING
 153 #define CONFIG_BACKSIDE_L2_CACHE
 154 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 155 #define CONFIG_BTB                      /* toggle branch predition */
 156
 157 #define CONFIG_ENABLE_36BIT_PHYS
 158
 159 /* POST memory regions test */
 160 #define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS
 161
 162 /*
 163  *  Config the L3 Cache as L3 SRAM
 164  */
 165 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 166 #define CONFIG_SYS_L3_SIZE              256 << 10
 167
 168 #define CONFIG_SYS_DCSRBAR              0xf0000000
 169 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 170
 171 /*
 172  * DDR Setup
 173  */
 174 #define CONFIG_VERY_BIG_RAM
 175 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 176 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 177
 178 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 179 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 180
 181 #define CONFIG_SYS_SPD_BUS_NUM  0
 182 #define SPD_EEPROM_ADDRESS      0x54
 183 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 184
 185 /******************************************************************************
 186  * (PRAM usage)
 187  * ... -------------------------------------------------------
 188  * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM
 189  * ... |<------------------- pram -------------------------->|
 190  * ... -------------------------------------------------------
 191  * @END_OF_RAM:
 192  * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose
 193  * @CONFIG_KM_PHRAM: address for /var
 194  * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application)
 195  * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM
 196  */
 197
 198 /* size of rootfs in RAM */
 199 #define CONFIG_KM_ROOTFSSIZE    0x0
 200 /* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
 201  * is not valid yet, which is the case for when u-boot copies itself to RAM
 202  */
 203 #define CONFIG_PRAM             ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10)
 204
 205 /*
 206  * IFC Definitions
 207  */
 208 /* NOR flash on IFC CS0 */
 209 #define CONFIG_SYS_FLASH_BASE           0xe8000000
 210 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | \
 211                                         CONFIG_SYS_FLASH_BASE)
 212
 213 #define CONFIG_SYS_NOR_CSPR_EXT (0x0f)
 214 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 215                                 CSPR_PORT_SIZE_16 | /* Port size = 16 bit */\
 216                                 0x00000010 |        /* drive TE high */\
 217                                 CSPR_MSEL_NOR |     /* MSEL = NOR */\
 218                                 CSPR_V)             /* valid */
 219 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(64 * 1024 * 1024) /* 64MB */
 220 #define CONFIG_SYS_NOR_CSOR     (CSOR_NOR_AVD_TGL_PGM_EN | /* AVD toggle */\
 221                                 CSOR_NOR_TRHZ_20 | \
 222                                 CSOR_NOR_BCTLD)
 223
 224 /* NOR Flash Timing Params */
 225 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x1) | \
 226                                 FTIM0_NOR_TEADC(0x7) | \
 227                                 FTIM0_NOR_TEAHC(0x1))
 228 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1) | \
 229                                 FTIM1_NOR_TRAD_NOR(0x21) | \
 230                                 FTIM1_NOR_TSEQRAD_NOR(0x21))
 231 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCH(0x1) | \
 232                                 FTIM2_NOR_TCS(0x1) | \
 233                                 FTIM2_NOR_TWP(0xb) | \
 234                                 FTIM2_NOR_TWPH(0x6))
 235 #define CONFIG_SYS_NOR_FTIM3    0x0
 236
 237 #define CONFIG_SYS_CSPR0_EXT    CONFIG_SYS_NOR_CSPR_EXT
 238 #define CONFIG_SYS_CSPR0        CONFIG_SYS_NOR_CSPR
 239 #define CONFIG_SYS_AMASK0       CONFIG_SYS_NOR_AMASK
 240 #define CONFIG_SYS_CSOR0        CONFIG_SYS_NOR_CSOR
 241 #define CONFIG_SYS_CS0_FTIM0    CONFIG_SYS_NOR_FTIM0
 242 #define CONFIG_SYS_CS0_FTIM1    CONFIG_SYS_NOR_FTIM1
 243 #define CONFIG_SYS_CS0_FTIM2    CONFIG_SYS_NOR_FTIM2
 244 #define CONFIG_SYS_CS0_FTIM3    CONFIG_SYS_NOR_FTIM3
 245
 246 /* More NOR Flash params */
 247 #define CONFIG_SYS_FLASH_QUIET_TEST
 248
 249 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 250 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* sectors per device */
 251
 252 #define CONFIG_SYS_FLASH_EMPTY_INFO
 253 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 254
 255 /* NAND Flash on IFC CS1*/
 256 #define CONFIG_SYS_NAND_BASE            0xfa000000
 257 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 258
 259 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0f)
 260 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE) | \
 261                                 CSPR_PORT_SIZE_8 | /* Port Size = 8 bit */\
 262                                 0x00000010 |       /* drive TE high */\
 263                                 CSPR_MSEL_NAND |   /* MSEL = NAND */\
 264                                 CSPR_V)            /* valid */
 265 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024) /* 64kB */
 266
 267 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN | /* ECC encoder on */ \
 268                                 CSOR_NAND_ECC_DEC_EN | /* ECC decoder on */   \
 269                                 CSOR_NAND_ECC_MODE_4 | /* 4-bit ECC */        \
 270                                 CSOR_NAND_RAL_3      | /* RAL = 3Bytes */     \
 271                                 CSOR_NAND_PGS_2K     | /* Page size = 2K */   \
 272                                 CSOR_NAND_SPRZ_128   | /* Spare size = 128 */ \
 273                                 CSOR_NAND_PB(64)     | /* 64 Pages/Block */   \
 274                                 CSOR_NAND_TRHZ_40    | /**/                   \
 275                                 CSOR_NAND_BCTLD)       /**/
 276
 277 /* ONFI NAND Flash mode0 Timing Params */
 278 #define CONFIG_SYS_NAND_FTIM0   (FTIM0_NAND_TCCST(0x3) | \
 279                                 FTIM0_NAND_TWP(0x8) | \
 280                                 FTIM0_NAND_TWCHT(0x3) | \
 281                                 FTIM0_NAND_TWH(0x5))
 282 #define CONFIG_SYS_NAND_FTIM1   (FTIM1_NAND_TADLE(0x1e) | \
 283                                 FTIM1_NAND_TWBE(0x1e) | \
 284                                 FTIM1_NAND_TRR(0x6) | \
 285                                 FTIM1_NAND_TRP(0x8))
 286 #define CONFIG_SYS_NAND_FTIM2   (FTIM2_NAND_TRAD(0x9) | \
 287                                 FTIM2_NAND_TREH(0x5) | \
 288                                 FTIM2_NAND_TWHRE(0x3c))
 289 #define CONFIG_SYS_NAND_FTIM3   (FTIM3_NAND_TWW(0x1e))
 290
 291 #define CONFIG_SYS_CSPR1_EXT    CONFIG_SYS_NAND_CSPR_EXT
 292 #define CONFIG_SYS_CSPR1        CONFIG_SYS_NAND_CSPR
 293 #define CONFIG_SYS_AMASK1       CONFIG_SYS_NAND_AMASK
 294 #define CONFIG_SYS_CSOR1        CONFIG_SYS_NAND_CSOR
 295 #define CONFIG_SYS_CS1_FTIM0    CONFIG_SYS_NAND_FTIM0
 296 #define CONFIG_SYS_CS1_FTIM1    CONFIG_SYS_NAND_FTIM1
 297 #define CONFIG_SYS_CS1_FTIM2    CONFIG_SYS_NAND_FTIM2
 298 #define CONFIG_SYS_CS1_FTIM3    CONFIG_SYS_NAND_FTIM3
 299
 300 /* More NAND Flash Params */
 301 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 302 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 303
 304 /* QRIO on IFC CS2 */
 305 #define CONFIG_SYS_QRIO_BASE            0xfb000000
 306 #define CONFIG_SYS_QRIO_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_QRIO_BASE)
 307 #define SYS_QRIO_CSPR_EXT       (0x0f)
 308 #define SYS_QRIO_CSPR   (CSPR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE) | \
 309                                 CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\
 310                                 0x00000010 |       /* drive TE high */\
 311                                 CSPR_MSEL_GPCM |   /* MSEL = GPCM */\
 312                                 CSPR_V)           /* valid */
 313 #define SYS_QRIO_AMASK  IFC_AMASK(64 * 1024)  /* 64kB */
 314 #define SYS_QRIO_CSOR   (CSOR_GPCM_TRHZ_20 |\
 315                         CSOR_GPCM_BCTLD)
 316 /* QRIO Timing parameters for IFC CS2 */
 317 #define SYS_QRIO_FTIM0  (FTIM0_GPCM_TACSE(0x2) | \
 318                         FTIM0_GPCM_TEADC(0x8) | \
 319                         FTIM0_GPCM_TEAHC(0x2))
 320 #define SYS_QRIO_FTIM1  (FTIM1_GPCM_TACO(0x2) | \
 321                         FTIM1_GPCM_TRAD(0x6))
 322 #define SYS_QRIO_FTIM2  (FTIM2_GPCM_TCS(0x1) | \
 323                         FTIM2_GPCM_TCH(0x1) | \
 324                         FTIM2_GPCM_TWP(0x7))
 325 #define SYS_QRIO_FTIM3  0x04000000
 326 #define CONFIG_SYS_CSPR2_EXT    SYS_QRIO_CSPR_EXT
 327 #define CONFIG_SYS_CSPR2        SYS_QRIO_CSPR
 328 #define CONFIG_SYS_AMASK2       SYS_QRIO_AMASK
 329 #define CONFIG_SYS_CSOR2        SYS_QRIO_CSOR
 330 #define CONFIG_SYS_CS2_FTIM0    SYS_QRIO_FTIM0
 331 #define CONFIG_SYS_CS2_FTIM1    SYS_QRIO_FTIM1
 332 #define CONFIG_SYS_CS2_FTIM2    SYS_QRIO_FTIM2
 333 #define CONFIG_SYS_CS2_FTIM3    SYS_QRIO_FTIM3
 334
 335 #define CONFIG_HWCONFIG
 336
 337 /* define to use L1 as initial stack */
 338 #define CONFIG_SYS_INIT_RAM_LOCK
 339 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 340 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 341 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 342 /* The assembler doesn't like typecast */
 343 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 344         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 345           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 346 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 347
 348 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 349                                         GENERATED_GBL_DATA_SIZE)
 350 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 351
 352 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 353 #define CONFIG_SYS_MONITOR_LEN          0xc0000         /* 768k */
 354
 355 /*
 356  * Serial Port - controlled on board with jumper J8
 357  * open - index 2
 358  * shorted - index 1
 359  * Retain non-DM serial port for debug purposes.
 360  */
 361 #if !defined(CONFIG_DM_SERIAL)
 362 #define CONFIG_SYS_NS16550_SERIAL
 363 #define CONFIG_SYS_NS16550_REG_SIZE     1
 364 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
 365 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x11C500)
 366 #endif
 367
 368 #ifndef __ASSEMBLY__
 369 void set_sda(int state);
 370 void set_scl(int state);
 371 int get_sda(void);
 372 int get_scl(void);
 373 #endif
 374
 375 /*
 376  * General PCI
 377  * Memory space is mapped 1-1, but I/O space must start from 0.
 378  */
 379 /* controller 1 */
 380 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 381 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 382 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 383 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 384
 385 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 386 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 387 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 388 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 389 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 390 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 391 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 392                                         CONFIG_SYS_BMAN_CENA_SIZE)
 393 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 394 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 395 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 396 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 397 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 398 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 399 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 400 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 401 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 402                                         CONFIG_SYS_QMAN_CENA_SIZE)
 403 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 404 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 405
 406 #define CONFIG_SYS_DPAA_FMAN
 407 #define CONFIG_SYS_DPAA_PME
 408
 409 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 410
 411 /* Qman / Bman */
 412 /* RGMII (FM1@DTESC5) is local managemant interface */
 413 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x11
 414 #define CONFIG_ETHPRIME         "fm1-mac5"
 415
 416 /*
 417  * Hardware Watchdog
 418  */
 419 #define CONFIG_WATCHDOG_PRESC 34        /* wdog prescaler 2^(64-34) ~10min */
 420 #define CONFIG_WATCHDOG_RC WRC_CHIP     /* reset chip on watchdog event */
 421
 422 /*
 423  * For booting Linux, the board info and command line data
 424  * have to be in the first 64 MB of memory, since this is
 425  * the maximum mapped by the Linux kernel during initialization.
 426  */
 427 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 428 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 429
 430 /*
 431  * Environment Configuration
 432  */
 433 #ifndef CONFIG_KM_DEF_ENV               /* if not set by keymile-common.h */
 434 #define CONFIG_KM_DEF_ENV
 435 #endif
 436
 437 #define __USB_PHY_TYPE  utmi
 438
 439 #define CONFIG_KM_DEF_ENV_CPU                                           \
 440         "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0"                   \
 441         "cramfsloadfdt="                                                \
 442                 "cramfsload ${fdt_addr_r} "                             \
 443                 "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"             \
 444         "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
 445         "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 446                 " +${filesize} && "                                     \
 447                 "erase " __stringify(CONFIG_SYS_MONITOR_BASE)           \
 448                 " +${filesize} && "                                     \
 449                 "cp.b ${load_addr_r} "                                  \
 450                 __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \
 451                 "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 452                 " +${filesize}\0"                                       \
 453         "update-nor=protect off " __stringify(CONFIG_SYS_FLASH_BASE)    \
 454                 " +${filesize} && "                                     \
 455                 "erase " __stringify(CONFIG_SYS_FLASH_BASE)             \
 456                 " +${filesize} && "                                     \
 457                 "cp.b ${load_addr_r} "                                  \
 458                 __stringify(CONFIG_SYS_FLASH_BASE) " ${filesize} && "   \
 459                 "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 460                 " +" __stringify(CONFIG_SYS_MONITOR_LEN) "\0"           \
 461         "set_fdthigh=true\0"                                            \
 462         "checkfdt=true\0"                                               \
 463         "fpgacfg=true\0"                                                \
 464         ""
 465
 466 #define CONFIG_HW_ENV_SETTINGS                                          \
 467         "hwconfig=fsl_ddr:ctlr_intlv=cacheline\0"                       \
 468         "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
 469         "usb_dr_mode=host\0"
 470
 471 #define CONFIG_KM_NEW_ENV                                               \
 472         "newenv=protect off " __stringify(ENV_DEL_ADDR)                 \
 473                 " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && "          \
 474                 "erase " __stringify(ENV_DEL_ADDR)                      \
 475                 " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && "          \
 476                 "protect on " __stringify(ENV_DEL_ADDR)                 \
 477                 " +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0"
 478
 479 /* ppc_82xx is the equivalent to ppc_6xx, the generic ppc toolchain */
 480 #ifndef CONFIG_KM_DEF_ARCH
 481 #define CONFIG_KM_DEF_ARCH      "arch=ppc_82xx\0"
 482 #endif
 483
 484 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 485         CONFIG_KM_DEF_ENV                                               \
 486         CONFIG_KM_DEF_ARCH                                              \
 487         CONFIG_KM_NEW_ENV                                               \
 488         CONFIG_HW_ENV_SETTINGS                                          \
 489         "EEprom_ivm=pca9547:70:9\0"                                     \
 490         ""
 491
 492 #endif  /* __KMCENT2_H */