drivers/usb/host/ehci-vf.c

   1 /*
   2  * Copyright (c) 2015 Sanchayan Maity <[email protected]>
   3  * Copyright (C) 2015 Toradex AG
   4  *
   5  * Based on ehci-mx6 driver
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #include <common.h>
  11 #include <usb.h>
  12 #include <errno.h>
  13 #include <linux/compiler.h>
  14 #include <asm/io.h>
  15 #include <asm/arch/clock.h>
  16 #include <asm/arch/imx-regs.h>
  17 #include <asm/arch/crm_regs.h>
  18 #include <asm/imx-common/iomux-v3.h>
  19 #include <asm/imx-common/regs-usbphy.h>
  20 #include <usb/ehci-fsl.h>
  21
  22 #include "ehci.h"
  23
  24 #define USB_NC_REG_OFFSET                               0x00000800
  25
  26 #define ANADIG_PLL_CTRL_EN_USB_CLKS             (1 << 6)
  27
  28 #define UCTRL_OVER_CUR_POL      (1 << 8) /* OTG Polarity of Overcurrent */
  29 #define UCTRL_OVER_CUR_DIS      (1 << 7) /* Disable OTG Overcurrent Detection */
  30
  31 /* USBCMD */
  32 #define UCMD_RUN_STOP           (1 << 0) /* controller run/stop */
  33 #define UCMD_RESET                      (1 << 1) /* controller reset */
  34
  35 static const unsigned phy_bases[] = {
  36         USB_PHY0_BASE_ADDR,
  37         USB_PHY1_BASE_ADDR,
  38 };
  39
  40 static const unsigned nc_reg_bases[] = {
  41         USBC0_BASE_ADDR,
  42         USBC1_BASE_ADDR,
  43 };
  44
  45 static void usb_internal_phy_clock_gate(int index)
  46 {
  47         void __iomem *phy_reg;
  48
  49         phy_reg = (void __iomem *)phy_bases[index];
  50         clrbits_le32(phy_reg + USBPHY_CTRL, USBPHY_CTRL_CLKGATE);
  51 }
  52
  53 static void usb_power_config(int index)
  54 {
  55         struct anadig_reg __iomem *anadig =
  56                 (struct anadig_reg __iomem *)ANADIG_BASE_ADDR;
  57         void __iomem *pll_ctrl;
  58
  59         switch (index) {
  60         case 0:
  61                 pll_ctrl = &anadig->pll3_ctrl;
  62                 clrbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_BYPASS);
  63                 setbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_ENABLE
  64                          | ANADIG_PLL3_CTRL_POWERDOWN
  65                          | ANADIG_PLL_CTRL_EN_USB_CLKS);
  66                 break;
  67         case 1:
  68                 pll_ctrl = &anadig->pll7_ctrl;
  69                 clrbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_BYPASS);
  70                 setbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_ENABLE
  71                          | ANADIG_PLL7_CTRL_POWERDOWN
  72                          | ANADIG_PLL_CTRL_EN_USB_CLKS);
  73                 break;
  74         default:
  75                 return;
  76         }
  77 }
  78
  79 static void usb_phy_enable(int index, struct usb_ehci *ehci)
  80 {
  81         void __iomem *phy_reg;
  82         void __iomem *phy_ctrl;
  83         void __iomem *usb_cmd;
  84
  85         phy_reg = (void __iomem *)phy_bases[index];
  86         phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
  87         usb_cmd = (void __iomem *)&ehci->usbcmd;
  88
  89         /* Stop then Reset */
  90         clrbits_le32(usb_cmd, UCMD_RUN_STOP);
  91         while (readl(usb_cmd) & UCMD_RUN_STOP)
  92                 ;
  93
  94         setbits_le32(usb_cmd, UCMD_RESET);
  95         while (readl(usb_cmd) & UCMD_RESET)
  96                 ;
  97
  98         /* Reset USBPHY module */
  99         setbits_le32(phy_ctrl, USBPHY_CTRL_SFTRST);
 100         udelay(10);
 101
 102         /* Remove CLKGATE and SFTRST */
 103         clrbits_le32(phy_ctrl, USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
 104         udelay(10);
 105
 106         /* Power up the PHY */
 107         writel(0, phy_reg + USBPHY_PWD);
 108
 109         /* Enable FS/LS device */
 110         setbits_le32(phy_ctrl, USBPHY_CTRL_ENUTMILEVEL2 |
 111                  USBPHY_CTRL_ENUTMILEVEL3);
 112 }
 113
 114 static void usb_oc_config(int index)
 115 {
 116         void __iomem *ctrl;
 117
 118         ctrl = (void __iomem *)(nc_reg_bases[index] + USB_NC_REG_OFFSET);
 119
 120         setbits_le32(ctrl, UCTRL_OVER_CUR_POL);
 121         setbits_le32(ctrl, UCTRL_OVER_CUR_DIS);
 122 }
 123
 124 int __weak board_ehci_hcd_init(int port)
 125 {
 126         return 0;
 127 }
 128
 129 int ehci_hcd_init(int index, enum usb_init_type init,
 130                 struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 131 {
 132         struct usb_ehci *ehci;
 133
 134         if (index >= ARRAY_SIZE(nc_reg_bases))
 135                 return -EINVAL;
 136
 137         if (init == USB_INIT_DEVICE && index == 1)
 138                 return -ENODEV;
 139         if (init == USB_INIT_HOST && index == 0)
 140                 return -ENODEV;
 141
 142         ehci = (struct usb_ehci *)nc_reg_bases[index];
 143
 144         /* Do board specific initialisation */
 145         board_ehci_hcd_init(index);
 146
 147         usb_power_config(index);
 148         usb_oc_config(index);
 149         usb_internal_phy_clock_gate(index);
 150         usb_phy_enable(index, ehci);
 151
 152         *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
 153         *hcor = (struct ehci_hcor *)((uint32_t)*hccr +
 154                         HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
 155
 156         if (init == USB_INIT_DEVICE) {
 157                 setbits_le32(&ehci->usbmode, CM_DEVICE);
 158                 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
 159                 setbits_le32(&ehci->portsc, USB_EN);
 160         } else if (init == USB_INIT_HOST) {
 161                 setbits_le32(&ehci->usbmode, CM_HOST);
 162                 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
 163                 setbits_le32(&ehci->portsc, USB_EN);
 164         }
 165
 166         return 0;
 167 }
 168
 169 int ehci_hcd_stop(int index)
 170 {
 171         return 0;
 172 }