]> Git Repo - J-u-boot.git/blob - configs/stm32mp13_dhcor_defconfig
configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0
[J-u-boot.git] / configs / stm32mp13_dhcor_defconfig
1 #include <configs/stm32mp_dhsom.config>
2
3 CONFIG_ARM=y
4 CONFIG_ARCH_STM32MP=y
5 CONFIG_TFABOOT=y
6 CONFIG_SYS_MALLOC_F_LEN=0x1c0000
7 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0400000
8 CONFIG_ENV_OFFSET=0x3E0000
9 CONFIG_DEFAULT_DEVICE_TREE="st/stm32mp135f-dhcor-dhsbc"
10 CONFIG_STM32MP13X=y
11 CONFIG_DDR_CACHEABLE_SIZE=0x8000000
12 CONFIG_TARGET_ST_STM32MP13X=y
13 CONFIG_ENV_OFFSET_REDUND=0x3F0000
14 CONFIG_STM32MP15_PWR=y
15 # CONFIG_ARMV7_NONSEC is not set
16 CONFIG_SYS_MEMTEST_START=0xc0000000
17 CONFIG_SYS_MEMTEST_END=0xc4000000
18 CONFIG_BOOTSTAGE_RECORD_COUNT=100
19 CONFIG_BOOTDELAY=3
20 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
21 CONFIG_CMD_ASKENV=y
22 CONFIG_CMD_ERASEENV=y
23 CONFIG_CMD_LSBLK=y
24 CONFIG_CMD_CAT=y
25 CONFIG_CMD_SETEXPR_FMT=y
26 CONFIG_CMD_XXD=y
27 CONFIG_CMD_RNG=y
28 CONFIG_CMD_LOG=y
29 CONFIG_CMD_UBI=y
30 CONFIG_ENV_IS_NOWHERE=y
31 CONFIG_ENV_SPI_MAX_HZ=50000000
32 CONFIG_CLK_SCMI=y
33 CONFIG_SET_DFU_ALT_INFO=y
34 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
35 CONFIG_PHY_REALTEK=y
36 CONFIG_DM_REGULATOR_SCMI=y
37 CONFIG_RESET_SCMI=y
38 CONFIG_DM_RNG=y
39 CONFIG_RNG_STM32=y
40 CONFIG_SYSRESET_PSCI=y
41 CONFIG_TEE=y
42 CONFIG_OPTEE=y
43 # CONFIG_OPTEE_TA_AVB is not set
44 CONFIG_USB_ONBOARD_HUB=y
45 CONFIG_USB_HUB_DEBOUNCE_TIMEOUT=2000
46 CONFIG_ERRNO_STR=y
This page took 0.026381 seconds and 4 git commands to generate.