[J-u-boot.git] / include / configs / cm_fx6.h

/*
 * Config file for Compulab CM-FX6 board
 *
 * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
 *
 * Author: Nikita Kiryanov <[email protected]>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_CM_FX6_H
#define __CONFIG_CM_FX6_H

#include <asm/arch/imx-regs.h>
#include <config_distro_defaults.h>
#include "mx6_common.h"

/* Machine config */
#define CONFIG_MX6
#define CONFIG_SYS_LITTLE_ENDIAN
#define CONFIG_MACH_TYPE		4273
#define CONFIG_SYS_HZ			1000

/* Display information on boot */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_TIMESTAMP

/* CMD */
#include <config_cmd_default.h>
#define CONFIG_CMD_GREPENV
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_LOADB
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_XIMG
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS

/* MMC */
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_USDHC_NUM	3
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR

/* RAM */
#define PHYS_SDRAM_1			MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_2			MMDC1_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_NR_DRAM_BANKS		2
#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		0x10010000
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Serial console */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART4_BASE
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}

/* Shell */
#define CONFIG_SYS_PROMPT	"CM-FX6 # "
#define CONFIG_SYS_CBSIZE	1024
#define CONFIG_SYS_MAXARGS	16
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)

/* SPI flash */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		25000000
#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)

/* Environment */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
#define CONFIG_ENV_SIZE			(8 * 1024)
#define CONFIG_ENV_OFFSET		(768 * 1024)

#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel=uImage-cm-fx6\0" \
	"autoload=no\0" \
	"loadaddr=0x10800000\0" \
	"fdtaddr=0x11000000\0" \
	"console=ttymxc3,115200\0" \
	"ethprime=FEC0\0" \
	"bootscr=boot.scr\0" \
	"bootm_low=18000000\0" \
	"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
	"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
	"fdtfile=cm-fx6.dtb\0" \
	"doboot=bootm ${loadaddr}\0" \
	"loadfdt=false\0" \
	"setboottypez=setenv kernel zImage-cm-fx6;" \
		"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
		"setenv loadfdt true;\0" \
	"setboottypem=setenv kernel uImage-cm-fx6;" \
		"setenv doboot bootm ${loadaddr};" \
		"setenv loadfdt false;\0"\
	"run_eboot=echo Starting EBOOT ...; "\
		"mmc dev ${mmcdev} && " \
		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
	"mmcdev=2\0" \
	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
	"loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \
	"mmcbootscript=echo Running bootscript from mmc ...; "\
		"source ${loadaddr}\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"root=${mmcroot} " \
		"${video}\0" \
	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"run doboot\0" \
	"boot=mmc dev ${mmcdev}; " \
		"if mmc rescan; then " \
			"if run loadmmcbootscript; then " \
				"run mmcbootscript;" \
			"else " \
				"if run mmcloadkernel; then " \
					"if ${loadfdt}; then " \
						"run mmcloadfdt;" \
					"fi;" \
					"run mmcboot;" \
				"fi;" \
			"fi;" \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"run setboottypem; run boot"

/* SPI */
#define CONFIG_SPI
#define CONFIG_MXC_SPI
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SPI_FLASH_EON
#define CONFIG_SPI_FLASH_GIGADEVICE
#define CONFIG_SPI_FLASH_MACRONIX
#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_SST
#define CONFIG_SPI_FLASH_WINBOND

/* GPIO */
#define CONFIG_MXC_GPIO

/* Boot */
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_LOADADDR			0x10800000
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_SYS_BOOTMAPSZ	        (8 << 20)
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG

/* misc */
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_STACKSIZE			(128 * 1024)
#define CONFIG_SYS_MALLOC_LEN			(2 * 1024 * 1024)
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	800 /* 400 KB */

/* SPL */
#include "imx6_spl.h"
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x80 /* offset 64 kb */
#define CONFIG_SYS_MONITOR_LEN	(CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024)
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
#define CONFIG_SPL_SPI_LOAD

#endif	/* __CONFIG_CM_FX6_H */
Commit	Line	Data
e32028a7 NK	1	/*
	2	* Config file for Compulab CM-FX6 board
	3	*
	4	* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
	5	*
	6	* Author: Nikita Kiryanov <[email protected]>
	7	*
	8	* SPDX-License-Identifier: GPL-2.0+
	9	*/
	10
	11	#ifndef __CONFIG_CM_FX6_H
	12	#define __CONFIG_CM_FX6_H
	13
	14	#include <asm/arch/imx-regs.h>
	15	#include <config_distro_defaults.h>
	16	#include "mx6_common.h"
	17
	18	/* Machine config */
	19	#define CONFIG_MX6
	20	#define CONFIG_SYS_LITTLE_ENDIAN
	21	#define CONFIG_MACH_TYPE 4273
	22	#define CONFIG_SYS_HZ 1000
	23
	24	/* Display information on boot */
	25	#define CONFIG_DISPLAY_CPUINFO
	26	#define CONFIG_DISPLAY_BOARDINFO
	27	#define CONFIG_TIMESTAMP
	28
	29	/* CMD */
	30	#include <config_cmd_default.h>
	31	#define CONFIG_CMD_GREPENV
	32	#undef CONFIG_CMD_FLASH
	33	#undef CONFIG_CMD_LOADB
	34	#undef CONFIG_CMD_LOADS
	35	#undef CONFIG_CMD_XIMG
	36	#undef CONFIG_CMD_FPGA
	37	#undef CONFIG_CMD_IMLS
	38	#undef CONFIG_CMD_NET
	39	#undef CONFIG_CMD_NFS
	40
	41	/* MMC */
	42	#define CONFIG_MMC
	43	#define CONFIG_CMD_MMC
	44	#define CONFIG_GENERIC_MMC
	45	#define CONFIG_FSL_ESDHC
	46	#define CONFIG_FSL_USDHC
	47	#define CONFIG_SYS_FSL_USDHC_NUM 3
	48	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
	49
	50	/* RAM */
	51	#define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR
	52	#define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR
	53	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	54	#define CONFIG_NR_DRAM_BANKS 2
	55	#define CONFIG_SYS_MEMTEST_START 0x10000000
	56	#define CONFIG_SYS_MEMTEST_END 0x10010000
	57	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	58	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	59	#define CONFIG_SYS_INIT_SP_OFFSET \
	60	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	61	#define CONFIG_SYS_INIT_SP_ADDR \
	62	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	63
	64	/* Serial console */
65	#define CONFIG_MXC_UART
66	#define CONFIG_MXC_UART_BASE UART4_BASE
67	#define CONFIG_BAUDRATE 115200
68	#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
69
70	/* Shell */
71	#define CONFIG_SYS_PROMPT "CM-FX6 # "
72	#define CONFIG_SYS_CBSIZE 1024
73	#define CONFIG_SYS_MAXARGS 16
74	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
75	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
76	sizeof(CONFIG_SYS_PROMPT) + 16)
77
78	/* SPI flash */
79	#define CONFIG_SYS_NO_FLASH
80	#define CONFIG_CMD_SF
81	#define CONFIG_SF_DEFAULT_BUS 0
82	#define CONFIG_SF_DEFAULT_CS 0
83	#define CONFIG_SF_DEFAULT_SPEED 25000000
84	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
85
86	/* Environment */
87	#define CONFIG_ENV_OVERWRITE
88	#define CONFIG_ENV_IS_IN_SPI_FLASH
89	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
90	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
91	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
92	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
93	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
94	#define CONFIG_ENV_SIZE (8 * 1024)
95	#define CONFIG_ENV_OFFSET (768 * 1024)
96
97	#define CONFIG_EXTRA_ENV_SETTINGS \
98	"kernel=uImage-cm-fx6\0" \
99	"autoload=no\0" \
100	"loadaddr=0x10800000\0" \
101	"fdtaddr=0x11000000\0" \
102	"console=ttymxc3,115200\0" \
103	"ethprime=FEC0\0" \
104	"bootscr=boot.scr\0" \
105	"bootm_low=18000000\0" \
106	"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
107	"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
108	"fdtfile=cm-fx6.dtb\0" \
109	"doboot=bootm ${loadaddr}\0" \
110	"loadfdt=false\0" \
111	"setboottypez=setenv kernel zImage-cm-fx6;" \
112	"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
113	"setenv loadfdt true;\0" \
114	"setboottypem=setenv kernel uImage-cm-fx6;" \
115	"setenv doboot bootm ${loadaddr};" \
116	"setenv loadfdt false;\0"\
117	"run_eboot=echo Starting EBOOT ...; "\
118	"mmc dev ${mmcdev} && " \
119	"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
120	"mmcdev=2\0" \
121	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
122	"loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \
123	"mmcbootscript=echo Running bootscript from mmc ...; "\
124	"source ${loadaddr}\0" \
125	"mmcargs=setenv bootargs console=${console} " \
126	"root=${mmcroot} " \
127	"${video}\0" \
128	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
129	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
130	"mmcboot=echo Booting from mmc ...; " \
131	"run mmcargs; " \
132	"run doboot\0" \
133	"boot=mmc dev ${mmcdev}; " \
134	"if mmc rescan; then " \
135	"if run loadmmcbootscript; then " \
136	"run mmcbootscript;" \
137	"else " \
138	"if run mmcloadkernel; then " \
139	"if ${loadfdt}; then " \
140	"run mmcloadfdt;" \
141	"fi;" \
142	"run mmcboot;" \
143	"fi;" \
144	"fi;" \
145	"fi;\0"
146
147	#define CONFIG_BOOTCOMMAND \
148	"run setboottypem; run boot"
149
150	/* SPI */
151	#define CONFIG_SPI
152	#define CONFIG_MXC_SPI
153	#define CONFIG_SPI_FLASH
154	#define CONFIG_SPI_FLASH_ATMEL
155	#define CONFIG_SPI_FLASH_EON
156	#define CONFIG_SPI_FLASH_GIGADEVICE
157	#define CONFIG_SPI_FLASH_MACRONIX
158	#define CONFIG_SPI_FLASH_SPANSION
159	#define CONFIG_SPI_FLASH_STMICRO
160	#define CONFIG_SPI_FLASH_SST
161	#define CONFIG_SPI_FLASH_WINBOND
162
163	/* GPIO */
164	#define CONFIG_MXC_GPIO
165
166	/* Boot */
167	#define CONFIG_ZERO_BOOTDELAY_CHECK
168	#define CONFIG_LOADADDR 0x10800000
169	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
170	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
171	#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
172	#define CONFIG_SETUP_MEMORY_TAGS
173	#define CONFIG_INITRD_TAG
174
175	/* misc */
176	#define CONFIG_SYS_GENERIC_BOARD
177	#define CONFIG_STACKSIZE (128 * 1024)
178	#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
179	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */
180
181	/* SPL */
182	#include "imx6_spl.h"
183	#define CONFIG_SPL_BOARD_INIT
184	#define CONFIG_SPL_MMC_SUPPORT
185	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */
186	#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024)
187	#define CONFIG_SPL_SPI_SUPPORT
188	#define CONFIG_SPL_SPI_FLASH_SUPPORT
189	#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
190	#define CONFIG_SPL_SPI_LOAD
191
192	#endif /* __CONFIG_CM_FX6_H */