efi_selftest: simplify Makefile

[J-u-boot.git] / drivers / power / axp221.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * AXP221 and AXP223 driver
 *
 * IMPORTANT when making changes to this file check that the registers
 * used are the same for the axp221 and axp223.
 *
 * (C) Copyright 2014 Hans de Goede <[email protected]>
 * (C) Copyright 2013 Oliver Schinagl <[email protected]>
 */

#include <common.h>
#include <command.h>
#include <errno.h>
#include <asm/arch/pmic_bus.h>
#include <axp_pmic.h>

static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
{
	if (mvolt < min)
		mvolt = min;
	else if (mvolt > max)
		mvolt = max;

	return (mvolt - min) / div;
}

int axp_set_dcdc1(unsigned int mvolt)
{
	int ret;
	u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100);

	if (mvolt == 0)
		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
					AXP221_OUTPUT_CTRL1_DCDC1_EN);

	ret = pmic_bus_write(AXP221_DCDC1_CTRL, cfg);
	if (ret)
		return ret;

	ret = pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
			       AXP221_OUTPUT_CTRL2_DCDC1SW_EN);
	if (ret)
		return ret;

	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
				AXP221_OUTPUT_CTRL1_DCDC1_EN);
}

int axp_set_dcdc2(unsigned int mvolt)
{
	int ret;
	u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);

	if (mvolt == 0)
		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
					AXP221_OUTPUT_CTRL1_DCDC2_EN);

	ret = pmic_bus_write(AXP221_DCDC2_CTRL, cfg);
	if (ret)
		return ret;

	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
				AXP221_OUTPUT_CTRL1_DCDC2_EN);
}

int axp_set_dcdc3(unsigned int mvolt)
{
	int ret;
	u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20);

	if (mvolt == 0)
		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
					AXP221_OUTPUT_CTRL1_DCDC3_EN);

	ret = pmic_bus_write(AXP221_DCDC3_CTRL, cfg);
	if (ret)
		return ret;

	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
				AXP221_OUTPUT_CTRL1_DCDC3_EN);
}

int axp_set_dcdc4(unsigned int mvolt)
{
	int ret;
	u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);

	if (mvolt == 0)
		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
					AXP221_OUTPUT_CTRL1_DCDC4_EN);

	ret = pmic_bus_write(AXP221_DCDC4_CTRL, cfg);
	if (ret)
		return ret;

	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
				AXP221_OUTPUT_CTRL1_DCDC4_EN);
}

int axp_set_dcdc5(unsigned int mvolt)
{
	int ret;
	u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50);

	if (mvolt == 0)
		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
					AXP221_OUTPUT_CTRL1_DCDC5_EN);

	ret = pmic_bus_write(AXP221_DCDC5_CTRL, cfg);
	if (ret)
		return ret;

	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
				AXP221_OUTPUT_CTRL1_DCDC5_EN);
}

int axp_set_aldo1(unsigned int mvolt)
{
	int ret;
	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);

	if (mvolt == 0)
		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
					AXP221_OUTPUT_CTRL1_ALDO1_EN);

	ret = pmic_bus_write(AXP221_ALDO1_CTRL, cfg);
	if (ret)
		return ret;

	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
				AXP221_OUTPUT_CTRL1_ALDO1_EN);
}

int axp_set_aldo2(unsigned int mvolt)
{
	int ret;
	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);

	if (mvolt == 0)
		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
					AXP221_OUTPUT_CTRL1_ALDO2_EN);

	ret = pmic_bus_write(AXP221_ALDO2_CTRL, cfg);
	if (ret)
		return ret;

	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
				AXP221_OUTPUT_CTRL1_ALDO2_EN);
}

int axp_set_aldo3(unsigned int mvolt)
{
	int ret;
	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);

	if (mvolt == 0)
		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL3,
					AXP221_OUTPUT_CTRL3_ALDO3_EN);

	ret = pmic_bus_write(AXP221_ALDO3_CTRL, cfg);
	if (ret)
		return ret;

	return pmic_bus_setbits(AXP221_OUTPUT_CTRL3,
				AXP221_OUTPUT_CTRL3_ALDO3_EN);
}

int axp_set_dldo(int dldo_num, unsigned int mvolt)
{
	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
	int ret;

	if (dldo_num < 1 || dldo_num > 4)
		return -EINVAL;

	if (mvolt == 0)
		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2,
				AXP221_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1));

	ret = pmic_bus_write(AXP221_DLDO1_CTRL + (dldo_num - 1), cfg);
	if (ret)
		return ret;

	return pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
				AXP221_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1));
}

int axp_set_eldo(int eldo_num, unsigned int mvolt)
{
	int ret;
	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);

	if (eldo_num < 1 || eldo_num > 3)
		return -EINVAL;

	if (mvolt == 0)
		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2,
				AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1));

	ret = pmic_bus_write(AXP221_ELDO1_CTRL + (eldo_num - 1), cfg);
	if (ret)
		return ret;

	return pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
				AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1));
}

int axp_init(void)
{
	u8 axp_chip_id;
	int ret;

	ret = pmic_bus_init();
	if (ret)
		return ret;

	ret = pmic_bus_read(AXP221_CHIP_ID, &axp_chip_id);
	if (ret)
		return ret;

	if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
		return -ENODEV;

	/*
	 * Turn off LDOIO regulators / tri-state GPIO pins, when rebooting
	 * from android these are sometimes on.
	 */
	ret = pmic_bus_write(AXP_GPIO0_CTRL, AXP_GPIO_CTRL_INPUT);
	if (ret)
		return ret;

	ret = pmic_bus_write(AXP_GPIO1_CTRL, AXP_GPIO_CTRL_INPUT);
	if (ret)
		return ret;

	return 0;
}

int axp_get_sid(unsigned int *sid)
{
	u8 *dest = (u8 *)sid;
	int i, ret;

	ret = pmic_bus_init();
	if (ret)
		return ret;

	ret = pmic_bus_write(AXP221_PAGE, 1);
	if (ret)
		return ret;

	for (i = 0; i < 16; i++) {
		ret = pmic_bus_read(AXP221_SID + i, &dest[i]);
		if (ret)
			return ret;
	}

	pmic_bus_write(AXP221_PAGE, 0);

	for (i = 0; i < 4; i++)
		sid[i] = be32_to_cpu(sid[i]);

	return 0;
}

int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
	pmic_bus_write(AXP221_SHUTDOWN, AXP221_SHUTDOWN_POWEROFF);

	/* infinite loop during shutdown */
	while (1) {}

	/* not reached */
	return 0;
}