]> Git Repo - J-u-boot.git/blame - board/bmw/early_init.S
projects / J-u-boot.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Initial revision
[J-u-boot.git] / board / bmw / early_init.S
CommitLineData
afd7f3d0
WD		 1#include <ppc_asm.tmpl>
2#include <mpc824x.h>
3#include <ppc_defs.h>
4#include <asm/cache.h>
5#include <asm/mmu.h>
6
7#define USE_V2_INIT 1 /* Jimmy Blair's initialization. */
8
9
10/*
11 * Initialize the MMU using BAT entries and hardwired TLB
12 * This obviates the need for any code in cpu_init_f which
13 * configures the BAT registers.
14*/
15#define MEMORY_MGMT_MSR_BITS (MSR_DR | MSR_IR) /* Data and Inst Relocate */
16 .global iommu_setup
17 /* Initialize IO/MMU mappings via BAT method Ch. 7,
18 * PPC Programming Reference
19 */
20iommu_setup:
21
22/* initialize the BAT registers (SPRs 528 - 543 */
23#define mtibat0u(x) mtspr 528,(x) /* SPR 528 (IBAT0U) */
24#define mtibat0l(x) mtspr 529,(x) /* SPR 529 (IBAT0L) */
25#define mtibat1u(x) mtspr 530,(x) /* SPR 530 (IBAT1U) */
26#define mtibat1l(x) mtspr 531,(x) /* SPR 531 (IBAT1L) */
27#define mtibat2u(x) mtspr 532,(x) /* SPR 532 (IBAT2U) */
28#define mtibat2l(x) mtspr 533,(x) /* SPR 533 (IBAT2L) */
29#define mtibat3u(x) mtspr 534,(x) /* SPR 534 (IBAT3U) */
30#define mtibat3l(x) mtspr 535,(x) /* SPR 535 (IBAT3L) */
31#define mtdbat0u(x) mtspr 536,(x) /* SPR 536 (DBAT0U) */
32#define mtdbat0l(x) mtspr 537,(x) /* SPR 537 (DBAT0L) */
33#define mtdbat1u(x) mtspr 538,(x) /* SPR 538 (DBAT1U) */
34#define mtdbat1l(x) mtspr 539,(x) /* SPR 539 (DBAT1L) */
35#define mtdbat2u(x) mtspr 540,(x) /* SPR 540 (DBAT2U) */
36#define mtdbat2l(x) mtspr 541,(x) /* SPR 541 (DBAT2L) */
37#define mtdbat3u(x) mtspr 542,(x) /* SPR 542 (DBAT3U) */
38#define mtdbat3l(x) mtspr 543,(x) /* SPR 543 (DBAT3L) */
39
40
41/* PowerPC processors do not necessarily initialize the BAT
42 registers on power-up or reset. So they are in an unknown
43 state. Before programming the BATs for the first time, all
44 BAT registers MUST have their Vs and Vp bits cleared in the
45 upper BAT half in order to avoid possibly having 2 BATs
46 valid and mapping the same memory region.
47
48 The reason for this is that, even with address translation
49 disabled, multiple BAT hits for an address are treated as
50 programming errors and can cause unpredictable results.
51
52 It is up to the software to make sure it never has 2 IBAT
53 mappings or 2 DBAT mappings that are valid for the same
54 addresses. It is not necessary to perform this code
55 sequence every time the BATs are programmed, only when
56 there is a possibility that there may be overlapping BAT
57 entries.
58
59 When programming the BATs in non-reset scenarios, even if
60 you are sure that your new mapping will not temporarily
61 create overlapping regions, it is still a wise idea to
62 invalidate a BAT entry by setting its upper BAT register to
63 all 0's before programming it. This will avoid having a
64 BAT marked valid that is in an unknown or transient state
65*/
66
67 addis r5,0,0x0000
68 mtibat0u(r5)
69 mtibat0l(r5)
70 mtibat1u(r5)
71 mtibat1l(r5)
72 mtibat2u(r5)
73 mtibat2l(r5)
74 mtibat3u(r5)
75 mtibat3l(r5)
76 mtdbat0u(r5)
77 mtdbat0l(r5)
78 mtdbat1u(r5)
79 mtdbat1l(r5)
80 mtdbat2u(r5)
81 mtdbat2l(r5)
82 mtdbat3u(r5)
83 mtdbat3l(r5)
84 isync
85
86/*
87 * Set up I/D BAT0
88 */
89 lis r4, CFG_DBAT0L@h
90 ori r4, r4, CFG_DBAT0L@l
91 lis r3, CFG_DBAT0U@h
92 ori r3, r3, CFG_DBAT0U@l
93
94 mtdbat0l(r4)
95 isync
96 mtdbat0u(r3)
97 isync
98 sync
99
100 lis r4, CFG_IBAT0L@h
101 ori r4, r4, CFG_IBAT0L@l
102 lis r3, CFG_IBAT0U@h
103 ori r3, r3, CFG_IBAT0U@l
104
105 isync
106 mtibat0l(r4)
107 isync
108 mtibat0u(r3)
109 isync
110
111/*
112 * Set up I/D BAT1
113 */
114 lis r4, CFG_IBAT1L@h
115 ori r4, r4, CFG_IBAT1L@l
116 lis r3, CFG_IBAT1U@h
117 ori r3, r3, CFG_IBAT1U@l
118
119 isync
120 mtibat1l(r4)
121 isync
122 mtibat1u(r3)
123 isync
124 mtdbat1l(r4)
125 isync
126 mtdbat1u(r3)
127 isync
128 sync
129
130/*
131 * Set up I/D BAT2
132 */
133 lis r4, CFG_IBAT2L@h
134 ori r4, r4, CFG_IBAT2L@l
135 lis r3, CFG_IBAT2U@h
136 ori r3, r3, CFG_IBAT2U@l
137
138 isync
139 mtibat2l(r4)
140 isync
141 mtibat2u(r3)
142 isync
143 mtdbat2l(r4)
144 isync
145 mtdbat2u(r3)
146 isync
147 sync
148
149/*
150 * Setup I/D BAT3
151 */
152 lis r4, CFG_IBAT3L@h
153 ori r4, r4, CFG_IBAT3L@l
154 lis r3, CFG_IBAT3U@h
155 ori r3, r3, CFG_IBAT3U@l
156
157 isync
158 mtibat3l(r4)
159 isync
160 mtibat3u(r3)
161 isync
162 mtdbat3l(r4)
163 isync
164 mtdbat3u(r3)
165 isync
166 sync
167
168
169/*
170 * Invalidate all 64 TLB's
171 */
172 lis r3, 0
173 mtctr r3
174 lis r5, 4
175
176tlblp:
177 tlbie r3
178 sync
179 addi r3, r3, 0x1000
180 cmplw r3, r5
181 blt tlblp
182
183 sync
184
185/*
186 * Enable Data Translation
187 */
188 lis r4, MEMORY_MGMT_MSR_BITS@h
189 ori r4, r4, MEMORY_MGMT_MSR_BITS@l
190 mfmsr r3
191 or r3, r4, r3
192 mtmsr r3
193 isync
194 sync
195
196 blr
197
198
199#ifdef USE_V2_INIT
200/* #define USER_I_CACHE_ENABLE 1*/ /* Fast rom boots */
201/* Macro for hiadjust and lo */
202#define HIADJ(arg) arg@ha
203#define HI(arg) arg@h
204#define LO(arg) arg@l
205
206#undef LOADPTR
207#define LOADPTR(reg,const32) \
208 addis reg,r0,HIADJ(const32); addi reg,reg,LO(const32)
209
210.globl early_init_f
211
212early_init_f:
213/* MPC8245/BMW CPCI System Init
214 * Jimmy Blair, Broadcom Corp, 2002.
215 */
216 mflr r11
217 /* Zero-out registers */
218
219 addis r0,r0,0
220 mtspr SPRG0,r0
221 mtspr SPRG1,r0
222 mtspr SPRG2,r0
223 mtspr SPRG3,r0
224
225 /* Set MPU/MSR to a known state. Turn on FP */
226
227 LOADPTR (r3, MSR_FP)
228 sync
229 mtmsr r3
230 isync
231
232 /* Init the floating point control/status register */
233
234 mtfsfi 7,0x0
235 mtfsfi 6,0x0
236 mtfsfi 5,0x0
237 mtfsfi 4,0x0
238 mtfsfi 3,0x0
239 mtfsfi 2,0x0
240 mtfsfi 1,0x0
241 mtfsfi 0,0x0
242 isync
243
244 /* Set MPU/MSR to a known state. Turn off FP */
245
246#if 1 /* Turn off floating point (remove to keep FP on) */
247 andi. r3, r3, 0
248 sync
249 mtmsr r3
250 isync
251#endif
252
253 /* Init the Segment registers */
254
255 andi. r3, r3, 0
256 isync
257 mtsr 0,r3
258 isync
259 mtsr 1,r3
260 isync
261 mtsr 2,r3
262 isync
263 mtsr 3,r3
264 isync
265 mtsr 4,r3
266 isync
267 mtsr 5,r3
268 isync
269 mtsr 6,r3
270 isync
271 mtsr 7,r3
272 isync
273 mtsr 8,r3
274 isync
275 mtsr 9,r3
276 isync
277 mtsr 10,r3
278 isync
279 mtsr 11,r3
280 isync
281 mtsr 12,r3
282 isync
283 mtsr 13,r3
284 isync
285 mtsr 14,r3
286 isync
287 mtsr 15,r3
288 isync
289
290 /* Turn off data and instruction cache control bits */
291
292 mfspr r3, HID0
293 isync
294 rlwinm r4, r3, 0, 18, 15 /* r4 has ICE and DCE bits cleared */
295 sync
296 isync
297 mtspr HID0, r4 /* HID0 = r4 */
298 isync
299
300 /* Get cpu type */
301
302 mfspr r28, PVR
303 rlwinm r28, r28, 16, 16, 31
304
305 /* invalidate the MPU's data/instruction caches */
306
307 lis r3, 0x0
308 cmpli 0, 0, r28, CPU_TYPE_603
309 beq cpuIs603
310 cmpli 0, 0, r28, CPU_TYPE_603E
311 beq cpuIs603
312 cmpli 0, 0, r28, CPU_TYPE_603P
313 beq cpuIs603
314 cmpli 0, 0, r28, CPU_TYPE_604R
315 bne cpuNot604R
316
317cpuIs604R:
318 lis r3, 0x0
319 mtspr HID0, r3 /* disable the caches */
320 isync
321 ori r4, r4, 0x0002 /* disable BTAC by setting bit 30 */
322
323cpuNot604R:
324 ori r3, r3, (HID0_ICFI |HID0_DCI)
325
326cpuIs603:
327 ori r3, r3, (HID0_ICE | HID0_DCE)
328 or r4, r4, r3 /* set bits */
329 sync
330 isync
331 mtspr HID0, r4 /* HID0 = r4 */
332 andc r4, r4, r3 /* clear bits */
333 isync
334 cmpli 0, 0, r28, CPU_TYPE_604
335 beq cpuIs604
336 cmpli 0, 0, r28, CPU_TYPE_604E
337 beq cpuIs604
338 cmpli 0, 0, r28, CPU_TYPE_604R
339 beq cpuIs604
340 mtspr HID0, r4
341 isync
342
343#ifdef USER_I_CACHE_ENABLE
344 b instCacheOn603
345#else
346 b cacheEnableDone
347#endif
348
349cpuIs604:
350 LOADPTR (r5, 0x1000) /* loop count, 0x1000 */
351 mtspr CTR, r5
352loopDelay:
353 nop
354 bdnz loopDelay
355 isync
356 mtspr HID0, r4
357 isync
358
359 /* turn the Instruction cache ON for faster FLASH ROM boots */
360
361#ifdef USER_I_CACHE_ENABLE
362
363 ori r4, r4, (HID0_ICE | HID0_ICFI)
364 isync /* Synchronize for ICE enable */
365 b writeReg4
366instCacheOn603:
367 ori r4, r4, (HID0_ICE | HID0_ICFI)
368 rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */
369
370 /*
371 * The setting of the instruction cache enable (ICE) bit must be
372 * preceded by an isync instruction to prevent the cache from being
373 * enabled or disabled while an instruction access is in progress.
374 */
375 isync
376writeReg4:
377 mtspr HID0, r4 /* Enable Instr Cache & Inval cache */
378 cmpli 0, 0, r28, CPU_TYPE_604
379 beq cacheEnableDone
380 cmpli 0, 0, r28, CPU_TYPE_604E
381 beq cacheEnableDone
382
383 mtspr HID0, r3 /* using 2 consec instructions */
384 /* PPC603 recommendation */
385#endif
386cacheEnableDone:
387
388 /* Detect map A or B */
389
390 addis r5,r0, HI(CHRP_REG_ADDR)
391 addis r6,r0, HI(CHRP_REG_DATA)
392 LOADPTR (r7, KAHLUA_ID) /* Kahlua PCI controller ID */
393 LOADPTR (r8, BMC_BASE)
394
395 stwbrx r8,0,(r5)
396 lwbrx r3,0,(r6) /* Store read value to r3 */
397 cmp 0,0,r3,r7
398 beq cr0, X4_KAHLUA_START
399
400 /* It's not an 8240, is it an 8245? */
401
402 LOADPTR (r7, KAHLUA2_ID) /* Kahlua PCI controller ID */
403 cmp 0,0,r3,r7
404 beq cr0, X4_KAHLUA_START
405
406 /* Save the PCI controller type in r7 */
407 mr r7, r3
408
409 LOADPTR (r5, PREP_REG_ADDR)
410 LOADPTR (r6, PREP_REG_DATA)
411
412X4_KAHLUA_START:
413 /* MPC8245 changes begin here */
414 LOADPTR (r3, MPC107_PCI_CMD) /* PCI command reg */
415 stwbrx r3,0,r5
416 li r4, 6 /* Command register value */
417 sthbrx r4, 0, r6
418
419 LOADPTR (r3, MPC107_PCI_STAT) /* PCI status reg */
420 stwbrx r3,0,r5
421 li r4, -1 /* Write-to-clear all bits */
422 li r3, 2 /* PCI_STATUS is at +2 offset */
423 sthbrx r4, r3, r6
424
425 /*-------PROC_INT1_ADR */
426
427 LOADPTR (r3, PROC_INT1_ADR) /* Processor I/F Config 1 reg. */
428 stwbrx r3,0,r5
429 LOADPTR (r4, 0xff141b98)
430 stwbrx r4,0,r6
431
432 /*-------PROC_INT2_ADR */
433
434 LOADPTR (r3, PROC_INT2_ADR) /* Processor I/F Config 2 reg. */
435 stwbrx r3,0,r5
436 lis r4, 0x2000 /* Flush PCI config writes */
437 stwbrx r4,0,r6
438
439 LOADPTR (r9, KAHLUA2_ID)
440 cmpl 0, 0, r7, r9
441 bne L1not8245
442
443 /* MIOCR1 -- turn on bit for DLL delay */
444
445 LOADPTR (r3, MIOCR1_ADR_X)
446 stwbrx r3,0,r5
447 li r4, 0x04
448 stb r4, MIOCR1_SHIFT(r6)
449
450 /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
451 /* SDRAM_CLK_DEL (0x77)*/
452
453 LOADPTR (r3, MIOCR2_ADR_X)
454 stwbrx r3,0,r5
455 li r4, 0x10
456 stb r4, MIOCR2_SHIFT(r6)
457
458 /* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */
459
460 LOADPTR (r3, PMCR2_ADR_X)
461 stwbrx r3,0,r5
462 li r4, 0x20
463 stb r4, PMCR2_SHIFT(r6)
464
465 /* Initialize EUMBBAR early since 8245 has internal UART in EUMB */
466
467 LOADPTR (r3, EUMBBAR)
468 stwbrx r3,0,r5
469 LOADPTR (r4, CFG_EUMB_ADDR)
470 stwbrx r4,0,r6
471
472L1not8245:
473
474 /* Toggle the DLL reset bit in AMBOR */
475
476 LOADPTR (r3, AMBOR)
477 stwbrx r3,0,r5
478 lbz r4, 0(r6)
479
480 andi. r4, r4, 0xdf
481 stb r4, 0(r6) /* Clear DLL_RESET */
482 sync
483
484 ori r4, r4, 0x20 /* Set DLL_RESET */
485 stb r4, 0(r6)
486 sync
487
488 andi. r4, r4, 0xdf
489 stb r4, 0(r6) /* Clear DLL_RESET */
490
491
492 /* Enable RCS2, use supplied timings */
493 LOADPTR (r3, ERCR1)
494 stwbrx r3,0,r5
495 LOADPTR (r4, 0x80408000)
496 stwbrx r4,0,r6
497
498 /* Disable RCS3 parameters */
499 LOADPTR (r3, ERCR2)
500 stwbrx r3,0,r5
501 LOADPTR (r4, 0x00000000)
502 stwbrx r4,0,r6
503
504 /* RCS3 at 0x70000000, 64KBytes */
505 LOADPTR (r3, ERCR2)
506 stwbrx r3,0,r5
507 LOADPTR (r4, 0x00000004)
508 stwbrx r4,0,r6
509
510 /*-------MCCR1 */
511
512#ifdef INCLUDE_ECC
513#define MC_ECC 1
514#else /* INCLUDE_ECC */
515#define MC_ECC 0
516#endif /* INCLUDE_ECC */
517
518#define MC1_ROMNAL 8 /* 0-15 */
519#define MC1_ROMFAL 11 /* 0-31 */
520#define MC1_DBUS_SIZE 0 /* 0-3, read only */
521#define MC1_BURST 0 /* 0-1 */
522#define MC1_MEMGO 0 /* 0-1 */
523#define MC1_SREN 1 /* 0-1 */
524#define MC1_RAM_TYPE 0 /* 0-1 */
525#define MC1_PCKEN MC_ECC /* 0-1 */
526#define MC1_BANKBITS 0x5555 /* 2 bits/bank 7-0 */
527
528 LOADPTR (r3, MEM_CONT1_ADR) /* Set MCCR1 (F0) */
529 stwbrx r3,0,r5
530 LOADPTR(r4, \
531 MC1_ROMNAL << 28 | MC1_ROMFAL << 23 | \
532 MC1_DBUS_SIZE << 21 | MC1_BURST << 20 | \
533 MC1_MEMGO << 19 | MC1_SREN << 18 | \
534 MC1_RAM_TYPE << 17 | MC1_PCKEN << 16 )
535 li r3, MC1_BANKBITS
536 cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
537 bne BankBitsAdd
538 cmpli 0, 0, r3, 0x5555
539 beq K2BankBitsHack /* On 8245, 5555 ==> 0 */
540BankBitsAdd:
541 ori r4, r3, 0
542K2BankBitsHack:
543 stwbrx r4, 0, r6
544
545 /*------- MCCR2 */
546
547#define MC2_TS_WAIT_TIMER 0 /* 0-7 */
548#define MC2_ASRISE 8 /* 0-15 */
549#define MC2_ASFALL 4 /* 0-15 */
550#define MC2_INLINE_PAR_NOT_ECC 0 /* 0-1 */
551#define MC2_WRITE_PARITY_CHK_EN MC_ECC /* 0-1 */
552#define MC2_INLRD_PARECC_CHK_EN MC_ECC /* 0-1 */
553#define MC2_ECC_EN 0 /* 0-1 */
554#define MC2_EDO 0 /* 0-1 */
555/*
556* N.B. This refresh interval looks good up to 85 MHz with Hynix SDRAM.
557* May need to be decreased for 100 MHz
558*/
559#define MC2_REFINT 0x3a5 /* 0-0x3fff */
560#define MC2_RSV_PG 0 /* 0-1 */
561#define MC2_RMW_PAR MC_ECC /* 0-1 */
562
563 LOADPTR (r3, MEM_CONT2_ADR) /* Set MCCR2 (F4) */
564 stwbrx r3,0,r5
565 LOADPTR(r4, \
566 MC2_TS_WAIT_TIMER << 29 | MC2_ASRISE << 25 | \
567 MC2_ASFALL << 21 | MC2_INLINE_PAR_NOT_ECC << 20 | \
568 MC2_WRITE_PARITY_CHK_EN << 19 | \
569 MC2_INLRD_PARECC_CHK_EN << 18 | \
570 MC2_ECC_EN << 17 | MC2_EDO << 16 | \
571 MC2_REFINT << 2 | MC2_RSV_PG << 1 | MC2_RMW_PAR)
572 cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
573 bne notK2
574 /* clear Kahlua2 reserved bits */
575 LOADPTR (r3, 0xfffcffff)
576 and r4, r4, r3
577notK2:
578 stwbrx r4,0,r6
579
580 /*------- MCCR3 */
581
582#define MC_BSTOPRE 0x079 /* 0-0x7ff */
583
584#define MC3_BSTOPRE_U (MC_BSTOPRE >> 4 & 0xf)
585#define MC3_REFREC 8 /* 0-15 */
586#define MC3_RDLAT (4+MC_ECC) /* 0-15 */
587#define MC3_CPX 0 /* 0-1 */
588#define MC3_RAS6P 0 /* 0-15 */
589#define MC3_CAS5 0 /* 0-7 */
590#define MC3_CP4 0 /* 0-7 */
591#define MC3_CAS3 0 /* 0-7 */
592#define MC3_RCD2 0 /* 0-7 */
593#define MC3_RP1 0 /* 0-7 */
594
595 LOADPTR (r3, MEM_CONT3_ADR) /* Set MCCR3 (F8) */
596 stwbrx r3,0,r5
597 LOADPTR(r4, \
598 MC3_BSTOPRE_U << 28 | MC3_REFREC << 24 | \
599 MC3_RDLAT << 20 | MC3_CPX << 19 | \
600 MC3_RAS6P << 15 | MC3_CAS5 << 12 | MC3_CP4 << 9 | \
601 MC3_CAS3 << 6 | MC3_RCD2 << 3 | MC3_RP1)
602 cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
603 bne notK2b
604 /* clear Kahlua2 reserved bits */
605 LOADPTR (r3, 0xff000000)
606 and r4, r4, r3
607notK2b:
608 stwbrx r4,0,r6
609
610 /*------- MCCR4 */
611
612#define MC4_PRETOACT 3 /* 0-15 */
613#define MC4_ACTOPRE 5 /* 0-15 */
614#define MC4_WMODE 0 /* 0-1 */
615#define MC4_INLINE MC_ECC /* 0-1 */
616#define MC4_REGISTERED (1-MC_ECC) /* 0-1 */
617#define MC4_BSTOPRE_UU (MC_BSTOPRE >> 8 & 3)
618#define MC4_REGDIMM 0 /* 0-1 */
619#define MC4_SDMODE_CAS 2 /* 0-7 */
620#define MC4_DBUS_RCS1 1 /* 0-1, 8-bit */
621#define MC4_SDMODE_WRAP 0 /* 0-1 */
622#define MC4_SDMODE_BURST 2 /* 0-7 */
623#define MC4_ACTORW 3 /* 0-15 */
624#define MC4_BSTOPRE_L (MC_BSTOPRE & 0xf)
625
626 LOADPTR (r3, MEM_CONT4_ADR) /* Set MCCR4 (FC) */
627 stwbrx r3,0,r5
628 LOADPTR(r4, \
629 MC4_PRETOACT << 28 | MC4_ACTOPRE << 24 | \
630 MC4_WMODE << 23 | MC4_INLINE << 22 | \
631 MC4_REGISTERED << 20 | MC4_BSTOPRE_UU << 18 | \
632 MC4_DBUS_RCS1 << 17 | \
633 MC4_REGDIMM << 15 | MC4_SDMODE_CAS << 12 | \
634 MC4_SDMODE_WRAP << 11 | MC4_SDMODE_BURST << 8 | \
635 MC4_ACTORW << 4 | MC4_BSTOPRE_L)
636 cmpl 0, 0, r7, r9 /* Check for Kahlua 2 */
637 bne notK2c
638 /* Turn on Kahlua2 extended ROM space */
639 LOADPTR (r3, 0x00200000)
640 or r4, r4, r3
641notK2c:
642 stwbrx r4,0,r6
643
644#ifdef INCLUDE_ECC
645 /*------- MEM_ERREN1 */
646
647 LOADPTR (r3, MEM_ERREN1_ADR) /* Set MEM_ERREN1 (c0) */
648 stwbrx r3,0,r5
649 lwbrx r4,0,r6
650 ori r4,r4,4 /* Set MEM_PERR_EN */
651 stwbrx r4,0,r6
652#endif /* INCLUDE_ECC */
653
654 /*------- MSAR/MEAR */
655
656 LOADPTR (r3, MEM_START1_ADR) /* Set MSAR1 (80) */
657 stwbrx r3,0,r5
658 LOADPTR (r4, 0xc0804000)
659 stwbrx r4,0,r6
660
661 LOADPTR (r3, MEM_START2_ADR) /* Set MSAR2 (84) */
662 stwbrx r3,0,r5
663 LOADPTR (r4, 0xc0804000)
664 stwbrx r4,0,r6
665
666 LOADPTR (r3, XMEM_START1_ADR) /* Set MESAR1 (88) */
667 stwbrx r3,0,r5
668 LOADPTR (r4, 0x00000000)
669 stwbrx r4,0,r6
670
671 LOADPTR (r3, XMEM_START2_ADR) /* Set MESAR2 (8c) */
672 stwbrx r3,0,r5
673 LOADPTR (r4, 0x01010101)
674 stwbrx r4,0,r6
675
676 LOADPTR (r3, MEM_END1_ADR) /* Set MEAR1 (90) */
677 stwbrx r3,0,r5
678 LOADPTR (r4, 0xffbf7f3f)
679 stwbrx r4,0,r6
680
681 LOADPTR (r3, MEM_END2_ADR) /* Set MEAR2 (94) */
682 stwbrx r3,0,r5
683 LOADPTR (r4, 0xffbf7f3f)
684 stwbrx r4,0,r6
685
686 LOADPTR (r3, XMEM_END1_ADR) /* MEEAR1 (98) */
687 stwbrx r3,0,r5
688 LOADPTR (r4, 0x00000000)
689 stwbrx r4,0,r6
690
691 LOADPTR (r3, XMEM_END2_ADR) /* MEEAR2 (9c) */
692 stwbrx r3,0,r5
693 LOADPTR (r4, 0x01010101)
694 stwbrx r4,0,r6
695
696 /*-------ODCR */
697
698 LOADPTR (r3, ODCR_ADR_X) /* Set ODCR */
699 stwbrx r3,0,r5
700
701 li r4, 0x7f
702 stb r4, ODCR_SHIFT(r6) /* ODCR is at +3 offset */
703
704 /*-------MBEN */
705
706 LOADPTR (r3, MEM_EN_ADR) /* Set MBEN (a0) */
707 stwbrx r3,0,r5
708 li r4, 0x01 /* Enable bank 0 */
709 stb r4, 0(r6) /* MBEN is at +0 offset */
710
711#if 0 /* Jimmy: I think page made is broken */
712 /*-------PGMAX */
713
714 LOADPTR (r3, MPM_ADR_X)
715 stwbrx r3,0,r5
716 li r4, 0x32
717 stb r4, MPM_SHIFT(r6) /* PAGE_MODE is at +3 offset */
718#endif
719
720 /* Wait before initializing other registers */
721
722 lis r4,0x0001
723 mtctr r4
724
725KahluaX4wait200us:
726 bdnz KahluaX4wait200us
727
728 /* Set MEMGO bit */
729
730 LOADPTR (r3, MEM_CONT1_ADR) /* MCCR1 (F0) |= PGMAX */
731 stwbrx r3,0,r5
732 lwbrx r4,0,r6 /* old MCCR1 */
733 oris r4,r4,0x0008 /* MEMGO=1 */
734 stwbrx r4, 0, r6
735
736 /* Wait again */
737
738 addis r4,r0,0x0002
739 ori r4,r4,0xffff
740
741 mtctr r4
742
743KahluaX4wait8ref:
744 bdnz KahluaX4wait8ref
745
746 sync
747 eieio
748 mtlr r11
749 blr
750
751#else /* USE_V2_INIT */
752
753
754
755/* U-Boot works, but memory will not run reliably for all address ranges.
756 * Early U-Boot Working init, but 2.4.19 kernel will crash since memory is not
757 * initialized correctly. Could work if debugged.
758 */
759/* PCI Support routines */
760
761 .globl __pci_config_read_32
762__pci_config_read_32:
763 lis r4, 0xfec0
764 stwbrx r3, r0, r4
765 sync
766 lis r4, 0xfee0
767 lwbrx r3, 0, r4
768 blr
769 .globl __pci_config_read_16
770__pci_config_read_16:
771 lis r4, 0xfec0
772 andi. r5, r3, 2
773 stwbrx r3, r0, r4
774 sync
775 oris r4, r5, 0xfee0
776 lhbrx r3, r0, r4
777 blr
778 .globl __pci_config_read_8
779__pci_config_read_8:
780 lis r4, 0xfec0
781 andi. r5, r3, 3
782 stwbrx r3, r0, r4
783 sync
784 oris r4, r5, 0xfee0
785 lbz r3, 0(4)
786 blr
787 .globl __pci_config_write_32
788__pci_config_write_32:
789 lis r5, 0xfec0
790 stwbrx r3, r0, r5
791 sync
792 lis r5, 0xfee0
793 stwbrx r4, r0, r5
794 sync
795 blr
796 .globl __pci_config_write_16
797__pci_config_write_16:
798 lis r5, 0xfec0
799 andi. r6, r3, 2
800 stwbrx r3, r0, 5
801 sync
802 oris r5, r6, 0xfee0
803 sthbrx r4, r0, r5
804 sync
805 blr
806 .globl __pci_config_write_8
807__pci_config_write_8:
808 lis r5, 0xfec0
809 andi. r6, r3, 3
810 stwbrx r3, r0, r5
811 sync
812 oris r5, r6, 0xfee0
813 stb r4, 0(r5)
814 sync
815 blr
816 .globl in_8
817in_8:
818 oris r3, r3, 0xfe00
819 lbz r3,0(r3)
820 blr
821 .globl in_16
822in_16:
823 oris r3, r3, 0xfe00
824 lhbrx r3, 0, r3
825 blr
826 .globl in_16_ne
827in_16_ne:
828 oris r3, r3, 0xfe00
829 lhzx r3, 0, r3
830 blr
831 .globl in_32
832in_32:
833 oris r3, r3, 0xfe00
834 lwbrx r3, 0, r3
835 blr
836 .globl out_8
837out_8:
838 oris r3, r3, 0xfe00
839 stb r4, 0(r3)
840 eieio
841 blr
842 .globl out_16
843out_16:
844 oris r3, r3, 0xfe00
845 sthbrx r4, 0, r3
846 eieio
847 blr
848 .globl out_16_ne
849out_16_ne:
850 oris r3, r3, 0xfe00
851 sth r4, 0(r3)
852 eieio
853 blr
854 .globl out_32
855out_32:
856 oris r3, r3, 0xfe00
857 stwbrx r4, 0, r3
858 eieio
859 blr
860 .globl read_8
861read_8:
862 lbz r3,0(r3)
863 blr
864 .globl read_16
865read_16:
866 lhbrx r3, 0, r3
867 blr
868 .globl read_32
869read_32:
870 lwbrx r3, 0, r3
871 blr
872 .globl read_32_ne
873read_32_ne:
874 lwz r3, 0(r3)
875 blr
876 .globl write_8
877write_8:
878 stb r4, 0(r3)
879 eieio
880 blr
881 .globl write_16
882write_16:
883 sthbrx r4, 0, r3
884 eieio
885 blr
886 .globl write_32
887write_32:
888 stwbrx r4, 0, r3
889 eieio
890 blr
891 .globl write_32_ne
892write_32_ne:
893 stw r4, 0(r3)
894 eieio
895 blr
896
897
898.globl early_init_f
899
900early_init_f:
901 mflr r11
902 lis r10, 0x8000
903
904 /* PCI Latency Timer */
905 li r4, 0x0d
906 ori r3, r10, PLTR@l
907 bl __pci_config_write_8
908
909 /* Cache Line Size */
910 li r4, 0x08
911 ori r3, r10, PCLSR@l
912 bl __pci_config_write_8
913
914 /* PCI Cmd */
915 li r4, 6
916 ori r3, r10, PCICR@l
917 bl __pci_config_write_16
918
919#if 1
920 /* PCI Stat */
921 ori r3, r10, PCISR@l
922 bl __pci_config_read_16
923 ori r4, r4, 0xffff
924 ori r3, r10, PCISR@l
925 bl __pci_config_write_16
926#endif
927
928 /* PICR1 */
929 lis r4, 0xff14
930 ori r4, r4, 0x1b98
931 ori r3, r10, PICR1@l
932 bl __pci_config_write_32
933
934
935 /* PICR2 */
936 lis r4, 0x0404
937 ori r4, r4, 0x0004
938 ori r3, r10, PICR2@l
939 bl __pci_config_write_32
940
941 /* MIOCR1 */
942 li r4, 0x04
943 ori r3, r10, MIOCR1@l
944 bl __pci_config_write_8
945
946 /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
947 /* SDRAM_CLK_DEL (0x77)*/
948 li r4, 0x10
949 ori r3, r10, MIOCR2@l
950 bl __pci_config_write_8
951
952 /* EUMBBAR */
953 lis r4, 0xfc00
954 ori r3, r10, EUMBBAR@l
955 bl __pci_config_write_32
956
957 /* AMBOR */
958
959 /* Even if Address Map B is not being used (though it should),
960 * the memory DLL needs to be cleared/set/cleared before using memory.
961 */
962
963 ori r3, r10, AMBOR@l
964 bl __pci_config_read_8 /* get Current bits */
965
966 andi. r4, r4, 0xffdf
967 ori r3, r10, AMBOR@l
968 bl __pci_config_write_16 /* Clear DLL_RESET */
969
970 ori r4, r4, 0x0020
971 ori r3, r10, AMBOR@l
972 bl __pci_config_write_16 /* Set DLL_RESET */
973
974 andi. r4, r4, 0xffdf
975 ori r3, r10, AMBOR@l
976 bl __pci_config_write_16 /* Clear DLL_RESET */
977
978 /* ERCR1 */
979 lis r4, 0x8040 /* Enable RCS2, use supplied timings */
980 ori r4, r4, 0x8000
981 ori r3, r10, ERCR1@l
982 bl __pci_config_write_32
983
984 /* ERCR2 */
985 lis r4, 0x0000 /* Disable RCS3 parms */
986 ori r4, r4, 0x0000
987 ori r3, r10, ERCR2@l
988 bl __pci_config_write_32
989
990 /* ERCR3 */
991 lis r4, 0x0000 /* RCS3 at 0x70000000, 64K bytes */
992 ori r4, r4, 0x0004
993 ori r3, r10, ERCR2@l
994 bl __pci_config_write_32
995
996 /* Preserve memgo bit */
997 /* MCCR1 */
998
999/* lis r4, 0x75a8 / Safe Local ROM = 11+3 clocks */
1000 lis r4, 0x75a0 /* Safe Local ROM = 11+3 clocks */
1001/* lis r4, 0x73a0 / Fast Local ROM = 7+3 clocks */
1002/* oris r4, r4, 0x0010 / Burst ROM/Flash enable */
1003/* oris r4, r4, 0x0004 / Self-refresh enable */
1004
1005/* ori r4,r4,0xFFFF / 16Mbit 2bank SDRAM */
1006/* ori r4,r4,0xAAAA / 256Mbit 4bank SDRAM (8245 only) */
1007/* ori r4,r4,0x5555 / 64Mbit 2bank SDRAM */
1008 ori r4,r4,0x0000 /* 64Mbit 4bank SDRAM */
1009
1010 ori r3, r10, MCCR1@l
1011 bl __pci_config_write_32
1012
1013 /* MCCR2 */
1014
1015 lis r4,0x0000
1016/* oris r4,r4,0x4000 / TS_WAIT_TIMER = 3 clocks */
1017 oris r4,r4,0x1000 /* ASRISE = 8 clocks */
1018 oris r4,r4,0x0080 /* ASFALL = 8 clocks */
1019/* oris r4,r4,0x0010 / SDRAM Parity (else ECC) */
1020/* oris r4,r4,0x0008 / Write parity check */
1021/* oris r4,r4,0x0004 / SDRAM inline reads */
1022
1023
1024/* Select a refresh rate; it needs to match the bus speed; if too */
1025/* slow, data may be lost; if too fast, performance is lost. We */
1026/* use the fastest value so we run at all speeds. */
1027/* Refresh = (15600ns/busclk) - (213 (see UM)). */
1028
1029/* ori r4,r4,0x1d2c / 133 MHz mem bus = 1867 */
1030/* ori r4,r4,0x150c / 100 MHz mem bus = 1347 */
1031/* ori r4,r4,0x10fc / 83 MHz mem bus = 1087 */
1032/* ori r4,r4,0x0cc4 / 66 MHz mem bus = 817 */
1033 ori r4,r4,0x04cc /* 33 MHz mem bus (SAFE) = 307 */
1034/* ori r4,r4,0x0002 / Reserve a page */
1035/* ori r4,r4,0x0001 / RWM parity */
1036
1037 ori r3, r10, MCCR2@l
1038 bl __pci_config_write_32
1039
1040
1041 /* MCCR3 */
1042 lis r4,0x0000 /* BSTOPRE_M = 7 (see A/N) */
1043 oris r4,r4,0x0500 /* REFREC = 8 clocks */
1044 ori r3, r10, MCCR3@l
1045 bl __pci_config_write_32
1046
1047 /* MCCR4 */ /* Turn on registered buffer mode */
1048 lis r4, 0x2000 /* PRETOACT = 3 clocks */
1049 oris r4,r4,0x0400 /* ACTOPRE = 5 clocks */
1050/* oris r4,r4,0x0080 / Enable 8-beat burst (32-bit bus) */
1051/* oris r4,r4,0x0040 / Enable Inline ECC/Parity */
1052 oris r4,r4,0x0020 /* EXTROM enabled */
1053 oris r4,r4,0x0010 /* Registered buffers */
1054/* oris r4,r4,0x0000 / BSTOPRE_U = 0 (see A/N) */
1055 oris r4,r4,0x0002 /* DBUS_SIZ[2] (8 bit on RCS1) */
1056
1057/* ori r4,r4,0x8000 / Registered DIMMs */
1058 ori r4,r4,0x2000 /*CAS Latency (CL=3) (see RDLAT) */
1059/* ori r4,r4,0x2000 / CAS Latency (CL=2) (see RDLAT) */
1060/* ori r4,r4,0x0300 / Sequential wrap/8-beat burst */
1061 ori r4,r4,0x0200 /* Sequential wrap/4-beat burst */
1062 ori r4,r4,0x0030 /* ACTORW = 3 clocks */
1063 ori r4,r4,0x0009 /* BSTOPRE_L = 9 (see A/N) */
1064
1065 ori r3, r10, MCCR4@l
1066 bl __pci_config_write_32
1067
1068 /* MSAR1 */
1069 lis r4, 0xc0804000@h
1070 ori r4, r4, 0xc0804000@l
1071 ori r3, r10, MSAR1@l
1072 bl __pci_config_write_32
1073
1074 /* MSAR2 */
1075 lis r4, 0xc0804000@h
1076 ori r4, r4, 0xc0804000@l
1077 ori r3, r10, MSAR2@l
1078 bl __pci_config_write_32
1079
1080 /* MESAR1 */
1081 lis r4, 0x00000000@h
1082 ori r4, r4, 0x00000000@l
1083 ori r3, r10, EMSAR1@l
1084 bl __pci_config_write_32
1085
1086 /* MESAR2 */
1087 lis r4, 0x01010101@h
1088 ori r4, r4, 0x01010101@l
1089 ori r3, r10, EMSAR2@l
1090 bl __pci_config_write_32
1091
1092 /* MEAR1 */
1093 lis r4, 0xffbf7f3f@h
1094 ori r4, r4, 0xffbf7f3f@l
1095 ori r3, r10, MEAR1@l
1096 bl __pci_config_write_32
1097
1098 /* MEAR2 */
1099 lis r4, 0xffbf7f3f@h
1100 ori r4, r4, 0xffbf7f3f@l
1101 ori r3, r10, MEAR2@l
1102 bl __pci_config_write_32
1103
1104 /* MEEAR1 */
1105 lis r4, 0x00000000@h
1106 ori r4, r4, 0x00000000@l
1107 ori r3, r10, EMEAR1@l
1108 bl __pci_config_write_32
1109
1110 /* MEEAR2 */
1111 lis r4, 0x01010101@h
1112 ori r4, r4, 0x01010101@l
1113 ori r3, r10, EMEAR2@l
1114 bl __pci_config_write_32
1115
1116 /* ODCR */
1117 li r4, 0x7f
1118 ori r3, r10, ODCR@l
1119 bl __pci_config_write_8
1120
1121 /* MBER */
1122 li r4, 0x01
1123 ori r3, r10, MBER@l
1124 bl __pci_config_write_8
1125
1126 /* Page CTR aka PGMAX */
1127 li r4, 0x32
1128 ori r3, r10, 0x70
1129 bl __pci_config_write_8
1130
1131#if 0
1132 /* CLK Drive */
1133 ori r4, r10, 0xfc01 /* Top bit will be ignored */
1134 ori r3, r10, 0x74
1135 bl __pci_config_write_16
1136#endif
1137
1138 /* delay */
1139 lis r7, 1
1140 mtctr r7
1141label1: bdnz label1
1142
1143 /* Set memgo bit */
1144 /* MCCR1 */
1145 ori r3, r10, MCCR1@l
1146 bl __pci_config_read_32
1147 lis r7, 0x0008
1148 or r4, r3, r7
1149 ori r3, r10, MCCR1@l
1150 bl __pci_config_write_32
1151
1152 /* delay again */
1153 lis r7, 1
1154 mtctr r7
1155label2: bdnz label2
1156#if 0
1157/* DEBUG: Infinite loop, write then read */
1158loop:
1159 lis r7, 0xffff
1160 mtctr r7
1161 li r3, 0x5004
1162 lis r4, 0xa0a0
1163 ori r4, r4, 0x5050
1164 bl write_32_ne
1165 li r3, 0x5004
1166 bl read_32_ne
1167 bdnz loop
1168#endif
1169 mtlr r11
1170 blr
1171#endif
1172
Empty description
This page took 0.139129 seconds and 4 git commands to generate.