[J-u-boot.git] / include / configs / xilinx_zynqmp.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Configuration for Xilinx ZynqMP
 * (C) Copyright 2014 - 2015 Xilinx, Inc.
 * Michal Simek <[email protected]>
 *
 * Based on Configuration for Versatile Express
 */

#ifndef __XILINX_ZYNQMP_H
#define __XILINX_ZYNQMP_H

/* Generic Interrupt Controller Definitions */
#define GICD_BASE	0xF9010000
#define GICC_BASE	0xF9020000

/* Serial setup */
#define CONFIG_SYS_BAUDRATE_TABLE \
	{ 4800, 9600, 19200, 38400, 57600, 115200 }

/* GUIDs for capsule updatable firmware images */
#define XILINX_BOOT_IMAGE_GUID \
	EFI_GUID(0xde6066e8, 0x0256, 0x4fad, 0x82, 0x38, \
		 0xe4, 0x06, 0xe2, 0x74, 0xc4, 0xcf)

#define XILINX_UBOOT_IMAGE_GUID \
	EFI_GUID(0xcf9ecfd4, 0x938b, 0x41c5, 0x85, 0x51, \
		 0x1f, 0x88, 0x3a, 0xb7, 0xdc, 0x18)

#ifdef CONFIG_NAND_ARASAN
# define CONFIG_SYS_MAX_NAND_DEVICE	1
#endif

/* Miscellaneous configurable options */

#if defined(CONFIG_ZYNQMP_USB)
#define DFU_DEFAULT_POLL_TIMEOUT	300
#define CONFIG_THOR_RESET_OFF

# define PARTS_DEFAULT \
	"partitions=uuid_disk=${uuid_gpt_disk};" \
	"name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
	"name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
#endif

#if !defined(PARTS_DEFAULT)
# define PARTS_DEFAULT
#endif

/* Console I/O Buffer Size */

/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM)
# define PHY_ANEG_TIMEOUT       20000
#endif

#define CONFIG_SYS_BOOTM_LEN	(100 * 1024 * 1024)

#define ENV_MEM_LAYOUT_SETTINGS \
	"fdt_addr_r=0x40000000\0" \
	"fdt_size_r=0x400000\0" \
	"pxefile_addr_r=0x10000000\0" \
	"kernel_addr_r=0x18000000\0" \
	"kernel_size_r=0x10000000\0" \
	"kernel_comp_addr_r=0x30000000\0" \
	"kernel_comp_size=0x3C00000\0" \
	"scriptaddr=0x20000000\0" \
	"ramdisk_addr_r=0x02100000\0" \
	"script_size_f=0x80000\0" \

#if defined(CONFIG_MMC_SDHCI_ZYNQ)
# define BOOT_TARGET_DEVICES_MMC(func)	func(MMC, mmc, 0) func(MMC, mmc, 1)
#else
# define BOOT_TARGET_DEVICES_MMC(func)
#endif

#if defined(CONFIG_SATA_CEVA)
# define BOOT_TARGET_DEVICES_SCSI(func)	func(SCSI, scsi, 0)
#else
# define BOOT_TARGET_DEVICES_SCSI(func)
#endif

#if defined(CONFIG_ZYNQMP_USB)
# define BOOT_TARGET_DEVICES_USB(func)	func(USB, usb, 0) func(USB, usb, 1)
#else
# define BOOT_TARGET_DEVICES_USB(func)
#endif

#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
# define BOOT_TARGET_DEVICES_PXE(func)	func(PXE, pxe, na)
#else
# define BOOT_TARGET_DEVICES_PXE(func)
#endif

#if defined(CONFIG_CMD_DHCP)
# define BOOT_TARGET_DEVICES_DHCP(func)	func(DHCP, dhcp, na)
#else
# define BOOT_TARGET_DEVICES_DHCP(func)
#endif

#if defined(CONFIG_ZYNQMP_GQSPI)
# define BOOT_TARGET_DEVICES_QSPI(func)	func(QSPI, qspi, 0)
#else
# define BOOT_TARGET_DEVICES_QSPI(func)
#endif

#if defined(CONFIG_NAND_ARASAN)
# define BOOT_TARGET_DEVICES_NAND(func)	func(NAND, nand, 0)
#else
# define BOOT_TARGET_DEVICES_NAND(func)
#endif

#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
	"bootcmd_" #devtypel #instance "=sf probe " #instance " 0 0 && " \
		       "sf read $scriptaddr $script_offset_f $script_size_f && " \
		       "echo QSPI: Trying to boot script at ${scriptaddr} && " \
		       "source ${scriptaddr}; echo QSPI: SCRIPT FAILED: continuing...;\0"

#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
	#devtypel #instance " "

#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
	"bootcmd_" #devtypel #instance "= nand info && " \
		       "nand read $scriptaddr $script_offset_f $script_size_f && " \
		       "echo NAND: Trying to boot script at ${scriptaddr} && " \
		       "source ${scriptaddr}; echo NAND: SCRIPT FAILED: continuing...;\0"

#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
	#devtypel #instance " "

#define BOOT_TARGET_DEVICES_JTAG(func)	func(JTAG, jtag, na)

#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
	"bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
		"source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"

#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
	"jtag "

#define BOOT_TARGET_DEVICES_USB_DFU(func) \
	func(USB_DFU, usb_dfu, 0) func(USB_DFU, usb_dfu, 1)

#define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance) \
	"bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \
	"$scriptaddr $script_size_f && " \
	"dfu " #instance " ram " #instance " 60 && " \
	"echo DFU" #instance ": Trying to boot script at ${scriptaddr} && " \
	"source ${scriptaddr}; " \
	"echo DFU" #instance ": SCRIPT FAILED: continuing...;\0"

#define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance) \
	""

#define BOOT_TARGET_DEVICES_USB_THOR(func) \
	func(USB_THOR, usb_thor, 0) func(USB_THOR, usb_thor, 1)

#define BOOTENV_DEV_USB_THOR(devtypeu, devtypel, instance) \
	"bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \
	"$scriptaddr $script_size_f && " \
	"thordown " #instance " ram " #instance " && " \
	"echo THOR" #instance ": Trying to boot script at ${scriptaddr} && " \
	"source ${scriptaddr}; " \
	"echo THOR" #instance ": SCRIPT FAILED: continuing...;\0"

#define BOOTENV_DEV_NAME_USB_THOR(devtypeu, devtypel, instance) \
	""

#define BOOT_TARGET_DEVICES(func) \
	BOOT_TARGET_DEVICES_JTAG(func) \
	BOOT_TARGET_DEVICES_MMC(func) \
	BOOT_TARGET_DEVICES_QSPI(func) \
	BOOT_TARGET_DEVICES_NAND(func) \
	BOOT_TARGET_DEVICES_USB_DFU(func) \
	BOOT_TARGET_DEVICES_USB_THOR(func) \
	BOOT_TARGET_DEVICES_USB(func) \
	BOOT_TARGET_DEVICES_SCSI(func) \
	BOOT_TARGET_DEVICES_PXE(func) \
	BOOT_TARGET_DEVICES_DHCP(func)

#include <config_distro_bootcmd.h>

/* Initial environment variables */
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
	ENV_MEM_LAYOUT_SETTINGS \
	BOOTENV
#endif

/* SPL can't handle all huge variables - define just DFU */
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
#undef CONFIG_EXTRA_ENV_SETTINGS
# define CONFIG_EXTRA_ENV_SETTINGS \
	"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
			  "atf-uboot.ub ram 0x10000000 0x1000000;" \
			  "Image ram 0x80000 0x3f80000;" \
			  "system.dtb ram 0x4000000 0x100000\0" \
	"dfu_bufsiz=0x1000\0"
#endif

#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
# define CONFIG_SYS_SPI_KERNEL_OFFS	0x80000
# define CONFIG_SYS_SPI_ARGS_OFFS	0xa0000
# define CONFIG_SYS_SPI_ARGS_SIZE	0xa0000
#endif

/* u-boot is like dtb */

/* ATF is my kernel image */

#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
# define CONFIG_SPL_HASH
# define CONFIG_ENV_MAX_ENTRIES	10
#endif

#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
#endif

#endif /* __XILINX_ZYNQMP_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
84c7204b MS	2	/*
	3	* Configuration for Xilinx ZynqMP
	4	* (C) Copyright 2014 - 2015 Xilinx, Inc.
	5	* Michal Simek <[email protected]>
	6	*
	7	* Based on Configuration for Versatile Express
84c7204b MS	8	*/
	9
	10	#ifndef __XILINX_ZYNQMP_H
	11	#define __XILINX_ZYNQMP_H
	12
84c7204b	13	/* Generic Interrupt Controller Definitions */
84c7204b MS	14	#define GICD_BASE 0xF9010000
	15	#define GICC_BASE 0xF9020000
	16
84c7204b	17	/* Serial setup */
84c7204b MS	18	#define CONFIG_SYS_BAUDRATE_TABLE \
	19	{ 4800, 9600, 19200, 38400, 57600, 115200 }
	20
741ef867 SG	21	/* GUIDs for capsule updatable firmware images */
	22	#define XILINX_BOOT_IMAGE_GUID \
	23	EFI_GUID(0xde6066e8, 0x0256, 0x4fad, 0x82, 0x38, \
	24	0xe4, 0x06, 0xe2, 0x74, 0xc4, 0xcf)
	25
	26	#define XILINX_UBOOT_IMAGE_GUID \
	27	EFI_GUID(0xcf9ecfd4, 0x938b, 0x41c5, 0x85, 0x51, \
	28	0x1f, 0x88, 0x3a, 0xb7, 0xdc, 0x18)
	29
78cb965a	30	#ifdef CONFIG_NAND_ARASAN
78cb965a	31	# define CONFIG_SYS_MAX_NAND_DEVICE 1
78cb965a SDPP	32	#endif
78cb965a SDPP	33
84c7204b	34	/* Miscellaneous configurable options */
84c7204b	35
16fa00a7	36	#if defined(CONFIG_ZYNQMP_USB)
16fa00a7	37	#define DFU_DEFAULT_POLL_TIMEOUT 300
16fa00a7	38	#define CONFIG_THOR_RESET_OFF
5ce987fe	39
5ce987fe SDPP	40	# define PARTS_DEFAULT \
	41	"partitions=uuid_disk=${uuid_gpt_disk};" \
	42	"name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
	43	"name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
	44	#endif
16fa00a7	45
5ce987fe SDPP	46	#if !defined(PARTS_DEFAULT)
	47	# define PARTS_DEFAULT
	48	#endif
	49
84c7204b	50	/* Console I/O Buffer Size */
84c7204b	51
cb7ea820	52	/* Ethernet driver */
596e5782	53	#if defined(CONFIG_ZYNQ_GEM)
e2928f32	54	# define PHY_ANEG_TIMEOUT 20000
cb7ea820 MS	55	#endif
cb7ea820 MS	56
cf5ed341	57	#define CONFIG_SYS_BOOTM_LEN (100 * 1024 * 1024)
84c7204b	58
b72894f1	59	#define ENV_MEM_LAYOUT_SETTINGS \
b72894f1	60	"fdt_addr_r=0x40000000\0" \
9643000e	61	"fdt_size_r=0x400000\0" \
b72894f1 MS	62	"pxefile_addr_r=0x10000000\0" \
b72894f1 MS	63	"kernel_addr_r=0x18000000\0" \
9643000e	64	"kernel_size_r=0x10000000\0" \
3965d13f RKP	65	"kernel_comp_addr_r=0x30000000\0" \
3965d13f RKP	66	"kernel_comp_size=0x3C00000\0" \
81764f53	67	"scriptaddr=0x20000000\0" \
b72894f1	68	"ramdisk_addr_r=0x02100000\0" \
ad78d264	69	"script_size_f=0x80000\0" \
b72894f1	70
08aa0334	71	#if defined(CONFIG_MMC_SDHCI_ZYNQ)
b72894f1 MS	72	# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
	73	#else
	74	# define BOOT_TARGET_DEVICES_MMC(func)
	75	#endif
	76
	77	#if defined(CONFIG_SATA_CEVA)
	78	# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
	79	#else
	80	# define BOOT_TARGET_DEVICES_SCSI(func)
	81	#endif
	82
	83	#if defined(CONFIG_ZYNQMP_USB)
	84	# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
	85	#else
	86	# define BOOT_TARGET_DEVICES_USB(func)
	87	#endif
	88
86271b3f	89	#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
1a82f59b MS	90	# define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
	91	#else
	92	# define BOOT_TARGET_DEVICES_PXE(func)
	93	#endif
	94
	95	#if defined(CONFIG_CMD_DHCP)
	96	# define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
	97	#else
	98	# define BOOT_TARGET_DEVICES_DHCP(func)
	99	#endif
	100
ad78d264 SDPP	101	#if defined(CONFIG_ZYNQMP_GQSPI)
	102	# define BOOT_TARGET_DEVICES_QSPI(func) func(QSPI, qspi, 0)
	103	#else
	104	# define BOOT_TARGET_DEVICES_QSPI(func)
	105	#endif
	106
	107	#if defined(CONFIG_NAND_ARASAN)
	108	# define BOOT_TARGET_DEVICES_NAND(func) func(NAND, nand, 0)
	109	#else
	110	# define BOOT_TARGET_DEVICES_NAND(func)
	111	#endif
	112
	113	#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
	114	"bootcmd_" #devtypel #instance "=sf probe " #instance " 0 0 && " \
	115	"sf read $scriptaddr $script_offset_f $script_size_f && " \
19d13045 MS	116	"echo QSPI: Trying to boot script at ${scriptaddr} && " \
19d13045 MS	117	"source ${scriptaddr}; echo QSPI: SCRIPT FAILED: continuing...;\0"
ad78d264 SDPP	118
	119	#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
	120	#devtypel #instance " "
	121
	122	#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
	123	"bootcmd_" #devtypel #instance "= nand info && " \
	124	"nand read $scriptaddr $script_offset_f $script_size_f && " \
19d13045 MS	125	"echo NAND: Trying to boot script at ${scriptaddr} && " \
19d13045 MS	126	"source ${scriptaddr}; echo NAND: SCRIPT FAILED: continuing...;\0"
ad78d264 SDPP	127
	128	#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
	129	#devtypel #instance " "
	130
5d2274c0 SDPP	131	#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na)
	132
	133	#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
19d13045 MS	134	"bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
19d13045 MS	135	"source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
5d2274c0 SDPP	136
	137	#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
	138	"jtag "
	139
ef1be3e3 KR	140	#define BOOT_TARGET_DEVICES_USB_DFU(func) \
	141	func(USB_DFU, usb_dfu, 0) func(USB_DFU, usb_dfu, 1)
	142
	143	#define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance) \
	144	"bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \
	145	"$scriptaddr $script_size_f && " \
	146	"dfu " #instance " ram " #instance " 60 && " \
	147	"echo DFU" #instance ": Trying to boot script at ${scriptaddr} && " \
	148	"source ${scriptaddr}; " \
	149	"echo DFU" #instance ": SCRIPT FAILED: continuing...;\0"
	150
	151	#define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance) \
	152	""
	153
	154	#define BOOT_TARGET_DEVICES_USB_THOR(func) \
	155	func(USB_THOR, usb_thor, 0) func(USB_THOR, usb_thor, 1)
	156
	157	#define BOOTENV_DEV_USB_THOR(devtypeu, devtypel, instance) \
	158	"bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \
	159	"$scriptaddr $script_size_f && " \
	160	"thordown " #instance " ram " #instance " && " \
	161	"echo THOR" #instance ": Trying to boot script at ${scriptaddr} && " \
	162	"source ${scriptaddr}; " \
	163	"echo THOR" #instance ": SCRIPT FAILED: continuing...;\0"
	164
	165	#define BOOTENV_DEV_NAME_USB_THOR(devtypeu, devtypel, instance) \
	166	""
	167
b72894f1	168	#define BOOT_TARGET_DEVICES(func) \
5d2274c0	169	BOOT_TARGET_DEVICES_JTAG(func) \
b72894f1	170	BOOT_TARGET_DEVICES_MMC(func) \
ad78d264 SDPP	171	BOOT_TARGET_DEVICES_QSPI(func) \
ad78d264 SDPP	172	BOOT_TARGET_DEVICES_NAND(func) \
ef1be3e3 KR	173	BOOT_TARGET_DEVICES_USB_DFU(func) \
ef1be3e3 KR	174	BOOT_TARGET_DEVICES_USB_THOR(func) \
b72894f1 MS	175	BOOT_TARGET_DEVICES_USB(func) \
b72894f1 MS	176	BOOT_TARGET_DEVICES_SCSI(func) \
1a82f59b MS	177	BOOT_TARGET_DEVICES_PXE(func) \
1a82f59b MS	178	BOOT_TARGET_DEVICES_DHCP(func)
b72894f1 MS	179
	180	#include <config_distro_bootcmd.h>
	181
	182	/* Initial environment variables */
	183	#ifndef CONFIG_EXTRA_ENV_SETTINGS
	184	#define CONFIG_EXTRA_ENV_SETTINGS \
	185	ENV_MEM_LAYOUT_SETTINGS \
1e967b53	186	BOOTENV
b72894f1 MS	187	#endif
b72894f1 MS	188
d58fc12e	189	/* SPL can't handle all huge variables - define just DFU */
6536ca4d	190	#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
d58fc12e MS	191	#undef CONFIG_EXTRA_ENV_SETTINGS
	192	# define CONFIG_EXTRA_ENV_SETTINGS \
	193	"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
	194	"atf-uboot.ub ram 0x10000000 0x1000000;" \
	195	"Image ram 0x80000 0x3f80000;" \
	196	"system.dtb ram 0x4000000 0x100000\0" \
	197	"dfu_bufsiz=0x1000\0"
	198	#endif
	199
24124abe	200	#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
24124abe MS	201	# define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000
	202	# define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000
	203	# define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000
abf9e5d0	204	#endif
24124abe	205
e6a9ed04	206	/* u-boot is like dtb */
e6a9ed04 MS	207
e6a9ed04 MS	208	/* ATF is my kernel image */
e6a9ed04	209
6536ca4d	210	#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
07212096	211	# define CONFIG_SPL_HASH
d58fc12e	212	# define CONFIG_ENV_MAX_ENTRIES 10
b45c17c7	213	#endif
d58fc12e	214
d58fc12e MS	215	#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
	216	# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
	217	#endif
d58fc12e	218
84c7204b	219	#endif /* __XILINX_ZYNQMP_H */