[J-u-boot.git] / include / configs / xilinx_zynqmp.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Configuration for Xilinx ZynqMP
 * (C) Copyright 2014 - 2015 Xilinx, Inc.
 * Michal Simek <[email protected]>
 *
 * Based on Configuration for Versatile Express
 */

#ifndef __XILINX_ZYNQMP_H
#define __XILINX_ZYNQMP_H

#define CONFIG_REMAKE_ELF

/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */

/* Generic Interrupt Controller Definitions */
#define CONFIG_GICV2
#define GICD_BASE	0xF9010000
#define GICC_BASE	0xF9020000

#ifndef CONFIG_SYS_MEMTEST_SCRATCH
# define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000
#endif

#define CONFIG_SYS_MEMTEST_START	0
#define CONFIG_SYS_MEMTEST_END		1000

#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE

/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#if !defined(COUNTER_FREQUENCY)
# define COUNTER_FREQUENCY		100000000
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x2000000)

/* Serial setup */
#define CONFIG_ARM_DCC
#define CONFIG_CPU_ARMV8

#define CONFIG_SYS_BAUDRATE_TABLE \
	{ 4800, 9600, 19200, 38400, 57600, 115200 }

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_MAY_FAIL

#ifdef CONFIG_NAND_ARASAN
# define CONFIG_SYS_MAX_NAND_DEVICE	1
# define CONFIG_SYS_NAND_ONFI_DETECTION
#endif

#if defined(CONFIG_SPL_BUILD)
#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
#endif

/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR		0x8000000

#if defined(CONFIG_ZYNQMP_USB)
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
#define DFU_DEFAULT_POLL_TIMEOUT	300
#define CONFIG_THOR_RESET_OFF
#define DFU_ALT_INFO_RAM \
	"dfu_ram_info=" \
	"setenv dfu_alt_info " \
	"Image ram $kernel_addr $kernel_size\\\\;" \
	"system.dtb ram $fdt_addr $fdt_size\0" \
	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"

#define DFU_ALT_INFO  \
		DFU_ALT_INFO_RAM

#ifndef CONFIG_SPL_BUILD
# define PARTS_DEFAULT \
	"partitions=uuid_disk=${uuid_gpt_disk};" \
	"name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
	"name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
#endif
#endif

#if !defined(DFU_ALT_INFO)
# define DFU_ALT_INFO
#endif

#if !defined(PARTS_DEFAULT)
# define PARTS_DEFAULT
#endif

/* Monitor Command Prompt */
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE		2048
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_PANIC_HANG
#define CONFIG_SYS_MAXARGS		64

/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM)
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define PHY_ANEG_TIMEOUT       20000
#endif

#define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)

#define CONFIG_CLOCKS

#define ENV_MEM_LAYOUT_SETTINGS \
	"fdt_high=10000000\0" \
	"fdt_addr_r=0x40000000\0" \
	"pxefile_addr_r=0x10000000\0" \
	"kernel_addr_r=0x18000000\0" \
	"scriptaddr=0x20000000\0" \
	"ramdisk_addr_r=0x02100000\0" \
	"script_offset_f=0x3e80000\0" \
	"script_size_f=0x80000\0" \

#if defined(CONFIG_MMC_SDHCI_ZYNQ)
# define BOOT_TARGET_DEVICES_MMC(func)	func(MMC, mmc, 0) func(MMC, mmc, 1)
#else
# define BOOT_TARGET_DEVICES_MMC(func)
#endif

#if defined(CONFIG_SATA_CEVA)
# define BOOT_TARGET_DEVICES_SCSI(func)	func(SCSI, scsi, 0)
#else
# define BOOT_TARGET_DEVICES_SCSI(func)
#endif

#if defined(CONFIG_ZYNQMP_USB)
# define BOOT_TARGET_DEVICES_USB(func)	func(USB, usb, 0) func(USB, usb, 1)
#else
# define BOOT_TARGET_DEVICES_USB(func)
#endif

#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
# define BOOT_TARGET_DEVICES_PXE(func)	func(PXE, pxe, na)
#else
# define BOOT_TARGET_DEVICES_PXE(func)
#endif

#if defined(CONFIG_CMD_DHCP)
# define BOOT_TARGET_DEVICES_DHCP(func)	func(DHCP, dhcp, na)
#else
# define BOOT_TARGET_DEVICES_DHCP(func)
#endif

#if defined(CONFIG_ZYNQMP_GQSPI)
# define BOOT_TARGET_DEVICES_QSPI(func)	func(QSPI, qspi, 0)
#else
# define BOOT_TARGET_DEVICES_QSPI(func)
#endif

#if defined(CONFIG_NAND_ARASAN)
# define BOOT_TARGET_DEVICES_NAND(func)	func(NAND, nand, 0)
#else
# define BOOT_TARGET_DEVICES_NAND(func)
#endif

#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
	"bootcmd_" #devtypel #instance "=sf probe " #instance " 0 0 && " \
		       "sf read $scriptaddr $script_offset_f $script_size_f && " \
		       "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"

#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
	#devtypel #instance " "

#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
	"bootcmd_" #devtypel #instance "= nand info && " \
		       "nand read $scriptaddr $script_offset_f $script_size_f && " \
		       "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"

#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
	#devtypel #instance " "

#define BOOT_TARGET_DEVICES(func) \
	BOOT_TARGET_DEVICES_MMC(func) \
	BOOT_TARGET_DEVICES_QSPI(func) \
	BOOT_TARGET_DEVICES_NAND(func) \
	BOOT_TARGET_DEVICES_USB(func) \
	BOOT_TARGET_DEVICES_SCSI(func) \
	BOOT_TARGET_DEVICES_PXE(func) \
	BOOT_TARGET_DEVICES_DHCP(func)

#include <config_distro_bootcmd.h>

/* Initial environment variables */
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
	ENV_MEM_LAYOUT_SETTINGS \
	BOOTENV \
	DFU_ALT_INFO
#endif

/* SPL can't handle all huge variables - define just DFU */
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
#undef CONFIG_EXTRA_ENV_SETTINGS
# define CONFIG_EXTRA_ENV_SETTINGS \
	"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
			  "atf-uboot.ub ram 0x10000000 0x1000000;" \
			  "Image ram 0x80000 0x3f80000;" \
			  "system.dtb ram 0x4000000 0x100000\0" \
	"dfu_bufsiz=0x1000\0"
#endif

#define CONFIG_SPL_STACK		0xfffffffc
#define CONFIG_SPL_MAX_SIZE		0x40000

/* Just random location in OCM */
#define CONFIG_SPL_BSS_START_ADDR	0x0
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000

#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
# define CONFIG_SYS_SPI_KERNEL_OFFS	0x80000
# define CONFIG_SYS_SPI_ARGS_OFFS	0xa0000
# define CONFIG_SYS_SPI_ARGS_SIZE	0xa0000
#endif

/* u-boot is like dtb */
#define CONFIG_SPL_FS_LOAD_ARGS_NAME	"u-boot.bin"
#define CONFIG_SYS_SPL_ARGS_ADDR	0x8000000

/* ATF is my kernel image */
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME	"atf-uboot.ub"

/* FIT load address for RAM boot */
#define CONFIG_SPL_LOAD_FIT_ADDRESS	0x10000000

/* MMC support */
#ifdef CONFIG_MMC_SDHCI_ZYNQ
# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0 /* unused */
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
#endif

#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
# undef CONFIG_CMD_BOOTD
# define CONFIG_SPL_ENV_SUPPORT
# define CONFIG_SPL_HASH_SUPPORT
# define CONFIG_ENV_MAX_ENTRIES	10
#endif

#define CONFIG_SYS_SPL_MALLOC_START	0x20000000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000

#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
#endif

#define CONFIG_BOARD_EARLY_INIT_F

#endif /* __XILINX_ZYNQMP_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
84c7204b MS	2	/*
	3	* Configuration for Xilinx ZynqMP
	4	* (C) Copyright 2014 - 2015 Xilinx, Inc.
	5	* Michal Simek <[email protected]>
	6	*
	7	* Based on Configuration for Versatile Express
84c7204b MS	8	*/
	9
	10	#ifndef __XILINX_ZYNQMP_H
	11	#define __XILINX_ZYNQMP_H
	12
	13	#define CONFIG_REMAKE_ELF
	14
	15	/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
	16
84c7204b MS	17	/* Generic Interrupt Controller Definitions */
	18	#define CONFIG_GICV2
	19	#define GICD_BASE 0xF9010000
	20	#define GICC_BASE 0xF9020000
	21
fce0a6b5 VK	22	#ifndef CONFIG_SYS_MEMTEST_SCRATCH
	23	# define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	24	#endif
d759512f	25
8d59d7f6 MS	26	#define CONFIG_SYS_MEMTEST_START 0
8d59d7f6 MS	27	#define CONFIG_SYS_MEMTEST_END 1000
84c7204b	28
8fbf678b	29	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
84c7204b	30
84c7204b	31	/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
713b6164 MS	32	#if !defined(COUNTER_FREQUENCY)
	33	# define COUNTER_FREQUENCY 100000000
	34	#endif
84c7204b MS	35
84c7204b MS	36	/* Size of malloc() pool */
16fa00a7	37	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
84c7204b MS	38
84c7204b MS	39	/* Serial setup */
636ac181 MS	40	#define CONFIG_ARM_DCC
636ac181 MS	41	#define CONFIG_CPU_ARMV8
84c7204b	42
84c7204b MS	43	#define CONFIG_SYS_BAUDRATE_TABLE \
	44	{ 4800, 9600, 19200, 38400, 57600, 115200 }
	45
cb7ea820 MS	46	/* BOOTP options */
cb7ea820 MS	47	#define CONFIG_BOOTP_BOOTFILESIZE
cb7ea820	48	#define CONFIG_BOOTP_MAY_FAIL
a1207de0	49
78cb965a	50	#ifdef CONFIG_NAND_ARASAN
78cb965a	51	# define CONFIG_SYS_MAX_NAND_DEVICE 1
78cb965a	52	# define CONFIG_SYS_NAND_ONFI_DETECTION
78cb965a SDPP	53	#endif
78cb965a SDPP	54
88f05a92 MS	55	#if defined(CONFIG_SPL_BUILD)
	56	#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
	57	#endif
	58
84c7204b MS	59	/* Miscellaneous configurable options */
	60	#define CONFIG_SYS_LOAD_ADDR 0x8000000
	61
16fa00a7	62	#if defined(CONFIG_ZYNQMP_USB)
16fa00a7 SDPP	63	#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
16fa00a7 SDPP	64	#define DFU_DEFAULT_POLL_TIMEOUT 300
16fa00a7 SDPP	65	#define CONFIG_THOR_RESET_OFF
	66	#define DFU_ALT_INFO_RAM \
	67	"dfu_ram_info=" \
0e43140b	68	"setenv dfu_alt_info " \
1b19daf4 SDPP	69	"Image ram $kernel_addr $kernel_size\\\\;" \
1b19daf4 SDPP	70	"system.dtb ram $fdt_addr $fdt_size\0" \
16fa00a7 SDPP	71	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
	72	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
	73
	74	#define DFU_ALT_INFO \
	75	DFU_ALT_INFO_RAM
5ce987fe SDPP	76
5ce987fe SDPP	77	#ifndef CONFIG_SPL_BUILD
5ce987fe SDPP	78	# define PARTS_DEFAULT \
	79	"partitions=uuid_disk=${uuid_gpt_disk};" \
	80	"name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
	81	"name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
	82	#endif
16fa00a7 SDPP	83	#endif
	84
	85	#if !defined(DFU_ALT_INFO)
	86	# define DFU_ALT_INFO
	87	#endif
	88
5ce987fe SDPP	89	#if !defined(PARTS_DEFAULT)
	90	# define PARTS_DEFAULT
	91	#endif
	92
84c7204b MS	93	/* Monitor Command Prompt */
	94	/* Console I/O Buffer Size */
	95	#define CONFIG_SYS_CBSIZE 2048
84c7204b	96	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
6ee28cb9	97	#define CONFIG_PANIC_HANG
84c7204b MS	98	#define CONFIG_SYS_MAXARGS 64
84c7204b MS	99
cb7ea820	100	/* Ethernet driver */
596e5782	101	#if defined(CONFIG_ZYNQ_GEM)
cb7ea820	102	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
e2928f32	103	# define PHY_ANEG_TIMEOUT 20000
cb7ea820 MS	104	#endif
cb7ea820 MS	105
84c7204b MS	106	#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
84c7204b MS	107
84c7204b MS	108	#define CONFIG_CLOCKS
84c7204b MS	109
b72894f1 MS	110	#define ENV_MEM_LAYOUT_SETTINGS \
b72894f1 MS	111	"fdt_high=10000000\0" \
b72894f1 MS	112	"fdt_addr_r=0x40000000\0" \
	113	"pxefile_addr_r=0x10000000\0" \
	114	"kernel_addr_r=0x18000000\0" \
81764f53	115	"scriptaddr=0x20000000\0" \
b72894f1	116	"ramdisk_addr_r=0x02100000\0" \
ad78d264 SDPP	117	"script_offset_f=0x3e80000\0" \
ad78d264 SDPP	118	"script_size_f=0x80000\0" \
b72894f1	119
08aa0334	120	#if defined(CONFIG_MMC_SDHCI_ZYNQ)
b72894f1 MS	121	# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
	122	#else
	123	# define BOOT_TARGET_DEVICES_MMC(func)
	124	#endif
	125
	126	#if defined(CONFIG_SATA_CEVA)
	127	# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
	128	#else
	129	# define BOOT_TARGET_DEVICES_SCSI(func)
	130	#endif
	131
	132	#if defined(CONFIG_ZYNQMP_USB)
	133	# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
	134	#else
	135	# define BOOT_TARGET_DEVICES_USB(func)
	136	#endif
	137
86271b3f	138	#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
1a82f59b MS	139	# define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
	140	#else
	141	# define BOOT_TARGET_DEVICES_PXE(func)
	142	#endif
	143
	144	#if defined(CONFIG_CMD_DHCP)
	145	# define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
	146	#else
	147	# define BOOT_TARGET_DEVICES_DHCP(func)
	148	#endif
	149
ad78d264 SDPP	150	#if defined(CONFIG_ZYNQMP_GQSPI)
	151	# define BOOT_TARGET_DEVICES_QSPI(func) func(QSPI, qspi, 0)
	152	#else
	153	# define BOOT_TARGET_DEVICES_QSPI(func)
	154	#endif
	155
	156	#if defined(CONFIG_NAND_ARASAN)
	157	# define BOOT_TARGET_DEVICES_NAND(func) func(NAND, nand, 0)
	158	#else
	159	# define BOOT_TARGET_DEVICES_NAND(func)
	160	#endif
	161
	162	#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
	163	"bootcmd_" #devtypel #instance "=sf probe " #instance " 0 0 && " \
	164	"sf read $scriptaddr $script_offset_f $script_size_f && " \
	165	"source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
	166
	167	#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
	168	#devtypel #instance " "
	169
	170	#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
	171	"bootcmd_" #devtypel #instance "= nand info && " \
	172	"nand read $scriptaddr $script_offset_f $script_size_f && " \
	173	"source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
	174
	175	#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
	176	#devtypel #instance " "
	177
b72894f1 MS	178	#define BOOT_TARGET_DEVICES(func) \
b72894f1 MS	179	BOOT_TARGET_DEVICES_MMC(func) \
ad78d264 SDPP	180	BOOT_TARGET_DEVICES_QSPI(func) \
ad78d264 SDPP	181	BOOT_TARGET_DEVICES_NAND(func) \
b72894f1 MS	182	BOOT_TARGET_DEVICES_USB(func) \
b72894f1 MS	183	BOOT_TARGET_DEVICES_SCSI(func) \
1a82f59b MS	184	BOOT_TARGET_DEVICES_PXE(func) \
1a82f59b MS	185	BOOT_TARGET_DEVICES_DHCP(func)
b72894f1 MS	186
	187	#include <config_distro_bootcmd.h>
	188
	189	/* Initial environment variables */
	190	#ifndef CONFIG_EXTRA_ENV_SETTINGS
	191	#define CONFIG_EXTRA_ENV_SETTINGS \
	192	ENV_MEM_LAYOUT_SETTINGS \
	193	BOOTENV \
	194	DFU_ALT_INFO
	195	#endif
	196
d58fc12e	197	/* SPL can't handle all huge variables - define just DFU */
6536ca4d	198	#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
d58fc12e MS	199	#undef CONFIG_EXTRA_ENV_SETTINGS
	200	# define CONFIG_EXTRA_ENV_SETTINGS \
	201	"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
	202	"atf-uboot.ub ram 0x10000000 0x1000000;" \
	203	"Image ram 0x80000 0x3f80000;" \
	204	"system.dtb ram 0x4000000 0x100000\0" \
	205	"dfu_bufsiz=0x1000\0"
	206	#endif
	207
8fbf678b	208	#define CONFIG_SPL_STACK 0xfffffffc
d58fc12e	209	#define CONFIG_SPL_MAX_SIZE 0x40000
e6a9ed04 MS	210
e6a9ed04 MS	211	/* Just random location in OCM */
8ed31f36 MS	212	#define CONFIG_SPL_BSS_START_ADDR 0x0
8ed31f36 MS	213	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
e6a9ed04	214
24124abe	215	#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
24124abe MS	216	# define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000
	217	# define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000
	218	# define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000
abf9e5d0	219	#endif
24124abe	220
e6a9ed04 MS	221	/* u-boot is like dtb */
	222	#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
	223	#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
	224
	225	/* ATF is my kernel image */
1309f671	226	#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
e6a9ed04 MS	227
	228	/* FIT load address for RAM boot */
	229	#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
	230
	231	/* MMC support */
08aa0334	232	#ifdef CONFIG_MMC_SDHCI_ZYNQ
e6a9ed04 MS	233	# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
	234	# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
	235	# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
	236	# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
e6a9ed04 MS	237	# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
	238	#endif
	239
6536ca4d	240	#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
d58fc12e MS	241	# undef CONFIG_CMD_BOOTD
	242	# define CONFIG_SPL_ENV_SUPPORT
	243	# define CONFIG_SPL_HASH_SUPPORT
	244	# define CONFIG_ENV_MAX_ENTRIES 10
b45c17c7	245	#endif
d58fc12e	246
b45c17c7 MS	247	#define CONFIG_SYS_SPL_MALLOC_START 0x20000000
b45c17c7 MS	248	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
d58fc12e MS	249
	250	#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
	251	# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
	252	#endif
d58fc12e	253
fb4000e8 MS	254	#define CONFIG_BOARD_EARLY_INIT_F
fb4000e8 MS	255
84c7204b	256	#endif /* __XILINX_ZYNQMP_H */