[J-u-boot.git] / doc / README.malta

MIPS Malta board

How to flash using a MIPS Navigator Probe:

  - Ensure that your Malta has jumper JP1 fitted. Without this jumper you will
    be unable to flash your Malta using a Navigator Probe.

  - Connect Navigator Console to your probe and Malta as usual.

  - Within Navigator Console run the following commands:

      source /path/to/u-boot/board/malta/flash-malta-boot.tcl
      reset
      flash-boot /path/to/u-boot/u-boot.bin

  - You should now be able to reboot your Malta to a U-boot shell.
Commit	Line	Data
024fba54 PB	1	MIPS Malta board
	2
	3	How to flash using a MIPS Navigator Probe:
	4
	5	- Ensure that your Malta has jumper JP1 fitted. Without this jumper you will
	6	be unable to flash your Malta using a Navigator Probe.
	7
	8	- Connect Navigator Console to your probe and Malta as usual.
	9
	10	- Within Navigator Console run the following commands:
	11
	12	source /path/to/u-boot/board/malta/flash-malta-boot.tcl
	13	reset
	14	flash-boot /path/to/u-boot/u-boot.bin
	15
	16	- You should now be able to reboot your Malta to a U-boot shell.